ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

commit ce938231bd3b1d7af3cbd8836f084801090470e1 upstream.

ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>)

"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]

The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) has some kind of default - not
unique mac address - set and requires to set the correct MAC address via
mac-address devicetree property, however:

"some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom"
should not be set (your use-case). in this case AH_USE_EEPROM should be
set (which is the default when there is no OF node)"[1]

The other use case is:

the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]

After this patch to ath9k_of_init() the new behavior will be:

    if there's no OF node then everything is the same as before
    if there's an empty OF node then ath9k will use the hardware EEPROM
      (before ath9k would fail to initialize because no EEPROM data was
      provided by userspace)
    if there's an OF node with only a MAC address then ath9k will use
      the MAC address and the hardware EEPROM (see the case above)
    with "qca,no-eeprom" EEPROM data from userspace will be requested.
      the behavior here will not change
[1]

Martin provides additional background on EEPROM swapping[1].

Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.

[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/10241731/

Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index bb7936090b91..b8e520fc2870 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -580,15 +580,15 @@ static int ath9k_of_init(struct ath_softc *sc)
 		ret = ath9k_eeprom_request(sc, eeprom_name);
 		if (ret)
 			return ret;
+
+		ah->ah_flags &= ~AH_USE_EEPROM;
+		ah->ah_flags |= AH_NO_EEP_SWAP;
 	}
 
 	mac = of_get_mac_address(np);
 	if (mac)
 		ether_addr_copy(common->macaddr, mac);
 
-	ah->ah_flags &= ~AH_USE_EEPROM;
-	ah->ah_flags |= AH_NO_EEP_SWAP;
-
 	return 0;
 }