iwlagn: wifi/bt coex configuration sequence

bt config command need to send before the init calibration command,
driver need to let uCode know that calibrations are being performed now
in order to assure antenna is not being taken to BT use during radio/dsp
reads/writes

Also, bt_coex_priorty_table command need to be send right after the
bt_config_command during init sequence. Followed by bt coex envelope
command to initialize and prepare uCode bt state machine

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 59 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index 6f77441cb65a..2dc569bc7e8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -329,6 +329,51 @@ static int iwlagn_send_wimax_coex(struct iwl_priv *priv)
 				sizeof(coex_cmd), &coex_cmd);
 }
 
+static const u8 iwlagn_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	0, 0, 0, 0, 0, 0, 0
+};
+
+static void iwlagn_send_prio_tbl(struct iwl_priv *priv)
+{
+	struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
+
+	memcpy(prio_tbl_cmd.prio_tbl, iwlagn_bt_prio_tbl,
+		sizeof(iwlagn_bt_prio_tbl));
+	if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PRIO_TABLE,
+				sizeof(prio_tbl_cmd), &prio_tbl_cmd))
+		IWL_ERR(priv, "failed to send BT prio tbl command\n");
+}
+
+static void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+{
+	struct iwl_bt_coex_prot_env_cmd env_cmd;
+
+	env_cmd.action = action;
+	env_cmd.type = type;
+	if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
+			     sizeof(env_cmd), &env_cmd))
+		IWL_ERR(priv, "failed to send BT env command\n");
+}
+
+
 int iwlagn_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
@@ -416,6 +461,20 @@ int iwlagn_alive_notify(struct iwl_priv *priv)
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	if (priv->cfg->advanced_bt_coexist) {
+		/* Configure Bluetooth device coexistence support */
+		/* need to perform this before any calibration */
+		priv->cfg->ops->hcmd->send_bt_config(priv);
+		if (bt_coex_active && priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+			iwlagn_send_prio_tbl(priv);
+			iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+				BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+			iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
+				BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		}
+
+	}
+
 	iwlagn_send_wimax_coex(priv);
 
 	iwlagn_set_Xtal_calib(priv);