wlcore: set irq_trigger in board files instead of hiding behind a quirk

The platform_quirk element in the platform data was used
to change the way the IRQ is triggered.  When set,
the EDGE_IRQ quirk would change the irqflags used
and treat edge trigger differently from the rest.

Instead of hiding this irq flag setting behind the quirk,
have the board files set the irq_trigger explicitly.

This will allow us to use standard irq DT definitions
later on.

Signed-off-by: Luciano Coelho <luca@coelho.fi>
[Eliad - rebase, add irq_trigger field and pass it,
update board file changes]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 16 insertions, 11 deletions

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 1e136993580f..67518f692cfc 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -27,6 +27,7 @@
 #include <linux/vmalloc.h>
 #include <linux/wl12xx.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include "wlcore.h"
 #include "debug.h"
@@ -538,7 +539,7 @@ static int wlcore_irq_locked(struct wl1271 *wl)
 	 * In case edge triggered interrupt must be used, we cannot iterate
 	 * more than once without introducing race conditions with the hardirq.
 	 */
-	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+	if (wl->irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))
 		loopcount = 1;
 
 	wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -6249,7 +6250,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
-	wl->platform_quirks = 0;
 	wl->system_hlid = WL12XX_SYSTEM_HLID;
 	wl->active_sta_count = 0;
 	wl->active_link_count = 0;
@@ -6391,7 +6391,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	struct platform_device *pdev = wl->pdev;
 	struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
 	struct wl12xx_platform_data *pdata = pdev_data->pdata;
-	unsigned long irqflags;
+	struct resource *res;
+
 	int ret;
 	irq_handler_t hardirq_fn = NULL;
 
@@ -6418,19 +6419,23 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	/* adjust some runtime configuration parameters */
 	wlcore_adjust_conf(wl);
 
-	wl->irq = platform_get_irq(pdev, 0);
-	wl->platform_quirks = pdata->platform_quirks;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		wl1271_error("Could not get IRQ resource");
+		goto out_free_nvs;
+	}
+
+	wl->irq = res->start;
+	wl->irq_flags = res->flags & IRQF_TRIGGER_MASK;
 	wl->if_ops = pdev_data->if_ops;
 
-	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) {
-		irqflags = IRQF_TRIGGER_RISING;
+	if (wl->irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))
 		hardirq_fn = wlcore_hardirq;
-	} else {
-		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
-	}
+	else
+		wl->irq_flags |= IRQF_ONESHOT;
 
 	ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq,
-				   irqflags, pdev->name, wl);
+				   wl->irq_flags, pdev->name, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
 		goto out_free_nvs;