summaryrefslogtreecommitdiff
path: root/drivers/parport/parport_pc.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parport/parport_pc.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parport/parport_pc.c')
-rw-r--r--drivers/parport/parport_pc.c3415
1 files changed, 3415 insertions, 0 deletions
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
new file mode 100644
index 000000000000..c5774e7855d0
--- /dev/null
+++ b/drivers/parport/parport_pc.c
@@ -0,0 +1,3415 @@
+/* Low-level parallel-port routines for 8255-based PC-style hardware.
+ *
+ * Authors: Phil Blundell <philb@gnu.org>
+ * Tim Waugh <tim@cyberelk.demon.co.uk>
+ * Jose Renau <renau@acm.org>
+ * David Campbell <campbell@torque.net>
+ * Andrea Arcangeli
+ *
+ * based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
+ *
+ * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
+ * DMA support - Bert De Jonghe <bert@sophis.be>
+ * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
+ * Various hacks, Fred Barnes, 04/2001
+ * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
+ */
+
+/* This driver should work with any hardware that is broadly compatible
+ * with that in the IBM PC. This applies to the majority of integrated
+ * I/O chipsets that are commonly available. The expected register
+ * layout is:
+ *
+ * base+0 data
+ * base+1 status
+ * base+2 control
+ *
+ * In addition, there are some optional registers:
+ *
+ * base+3 EPP address
+ * base+4 EPP data
+ * base+0x400 ECP config A
+ * base+0x401 ECP config B
+ * base+0x402 ECP control
+ *
+ * All registers are 8 bits wide and read/write. If your hardware differs
+ * only in register addresses (eg because your registers are on 32-bit
+ * word boundaries) then you can alter the constants in parport_pc.h to
+ * accommodate this.
+ *
+ * Note that the ECP registers may not start at offset 0x400 for PCI cards,
+ * but rather will start at port->base_hi.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/sysctl.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/via.h>
+#include <asm/parport.h>
+
+#define PARPORT_PC_MAX_PORTS PARPORT_MAX
+
+/* ECR modes */
+#define ECR_SPP 00
+#define ECR_PS2 01
+#define ECR_PPF 02
+#define ECR_ECP 03
+#define ECR_EPP 04
+#define ECR_VND 05
+#define ECR_TST 06
+#define ECR_CNF 07
+#define ECR_MODE_MASK 0xe0
+#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(stuff...)
+#endif
+
+
+#define NR_SUPERIOS 3
+static struct superio_struct { /* For Super-IO chips autodetection */
+ int io;
+ int irq;
+ int dma;
+} superios[NR_SUPERIOS] __devinitdata = { {0,},};
+
+static int user_specified;
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+ (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+static int verbose_probing;
+#endif
+static int pci_registered_parport;
+static int pnp_registered_parport;
+
+/* frob_control, but for ECR */
+static void frob_econtrol (struct parport *pb, unsigned char m,
+ unsigned char v)
+{
+ unsigned char ectr = 0;
+
+ if (m != 0xff)
+ ectr = inb (ECONTROL (pb));
+
+ DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+ m, v, ectr, (ectr & ~m) ^ v);
+
+ outb ((ectr & ~m) ^ v, ECONTROL (pb));
+}
+
+static __inline__ void frob_set_mode (struct parport *p, int mode)
+{
+ frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+/* Safely change the mode bits in the ECR
+ Returns:
+ 0 : Success
+ -EBUSY: Could not drain FIFO in some finite amount of time,
+ mode not changed!
+ */
+static int change_mode(struct parport *p, int m)
+{
+ const struct parport_pc_private *priv = p->physport->private_data;
+ unsigned char oecr;
+ int mode;
+
+ DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+
+ if (!priv->ecr) {
+ printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+ return 0;
+ }
+
+ /* Bits <7:5> contain the mode. */
+ oecr = inb (ECONTROL (p));
+ mode = (oecr >> 5) & 0x7;
+ if (mode == m) return 0;
+
+ if (mode >= 2 && !(priv->ctr & 0x20)) {
+ /* This mode resets the FIFO, so we may
+ * have to wait for it to drain first. */
+ unsigned long expire = jiffies + p->physport->cad->timeout;
+ int counter;
+ switch (mode) {
+ case ECR_PPF: /* Parallel Port FIFO mode */
+ case ECR_ECP: /* ECP Parallel Port mode */
+ /* Busy wait for 200us */
+ for (counter = 0; counter < 40; counter++) {
+ if (inb (ECONTROL (p)) & 0x01)
+ break;
+ if (signal_pending (current)) break;
+ udelay (5);
+ }
+
+ /* Poll slowly. */
+ while (!(inb (ECONTROL (p)) & 0x01)) {
+ if (time_after_eq (jiffies, expire))
+ /* The FIFO is stuck. */
+ return -EBUSY;
+ __set_current_state (TASK_INTERRUPTIBLE);
+ schedule_timeout ((HZ + 99) / 100);
+ if (signal_pending (current))
+ break;
+ }
+ }
+ }
+
+ if (mode >= 2 && m >= 2) {
+ /* We have to go through mode 001 */
+ oecr &= ~(7 << 5);
+ oecr |= ECR_PS2 << 5;
+ ECR_WRITE (p, oecr);
+ }
+
+ /* Set the mode. */
+ oecr &= ~(7 << 5);
+ oecr |= m << 5;
+ ECR_WRITE (p, oecr);
+ return 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Find FIFO lossage; FIFO is reset */
+#if 0
+static int get_fifo_residue (struct parport *p)
+{
+ int residue;
+ int cnfga;
+ const struct parport_pc_private *priv = p->physport->private_data;
+
+ /* Adjust for the contents of the FIFO. */
+ for (residue = priv->fifo_depth; ; residue--) {
+ if (inb (ECONTROL (p)) & 0x2)
+ /* Full up. */
+ break;
+
+ outb (0, FIFO (p));
+ }
+
+ printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+ residue);
+
+ /* Reset the FIFO. */
+ frob_set_mode (p, ECR_PS2);
+
+ /* Now change to config mode and clean up. FIXME */
+ frob_set_mode (p, ECR_CNF);
+ cnfga = inb (CONFIGA (p));
+ printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+
+ if (!(cnfga & (1<<2))) {
+ printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+ residue++;
+ }
+
+ /* Don't care about partial PWords until support is added for
+ * PWord != 1 byte. */
+
+ /* Back to PS2 mode. */
+ frob_set_mode (p, ECR_PS2);
+
+ DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+ return residue;
+}
+#endif /* 0 */
+#endif /* IEEE 1284 support */
+#endif /* FIFO support */
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ *
+ * This is also used in SPP detection.
+ */
+static int clear_epp_timeout(struct parport *pb)
+{
+ unsigned char r;
+
+ if (!(parport_pc_read_status(pb) & 0x01))
+ return 1;
+
+ /* To clear timeout some chips require double read */
+ parport_pc_read_status(pb);
+ r = parport_pc_read_status(pb);
+ outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
+ outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+ r = parport_pc_read_status(pb);
+
+ return !(r & 0x01);
+}
+
+/*
+ * Access functions.
+ *
+ * Most of these aren't static because they may be used by the
+ * parport_xxx_yyy macros. extern __inline__ versions of several
+ * of these are in parport_pc.h.
+ */
+
+static irqreturn_t parport_pc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ parport_generic_irq(irq, (struct parport *) dev_id, regs);
+ /* FIXME! Was it really ours? */
+ return IRQ_HANDLED;
+}
+
+static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+{
+ s->u.pc.ctr = 0xc;
+ if (dev->irq_func &&
+ dev->port->irq != PARPORT_IRQ_NONE)
+ /* Set ackIntEn */
+ s->u.pc.ctr |= 0x10;
+
+ s->u.pc.ecr = 0x34; /* NetMos chip can cause problems 0x24;
+ * D.Gruszka VScom */
+}
+
+static void parport_pc_save_state(struct parport *p, struct parport_state *s)
+{
+ const struct parport_pc_private *priv = p->physport->private_data;
+ s->u.pc.ctr = priv->ctr;
+ if (priv->ecr)
+ s->u.pc.ecr = inb (ECONTROL (p));
+}
+
+static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+{
+ struct parport_pc_private *priv = p->physport->private_data;
+ register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
+ outb (c, CONTROL (p));
+ priv->ctr = c;
+ if (priv->ecr)
+ ECR_WRITE (p, s->u.pc.ecr);
+}
+
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
+ size_t length, int flags)
+{
+ size_t got = 0;
+
+ if (flags & PARPORT_W91284PIC) {
+ unsigned char status;
+ size_t left = length;
+
+ /* use knowledge about data lines..:
+ * nFault is 0 if there is at least 1 byte in the Warp's FIFO
+ * pError is 1 if there are 16 bytes in the Warp's FIFO
+ */
+ status = inb (STATUS (port));
+
+ while (!(status & 0x08) && (got < length)) {
+ if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+ /* can grab 16 bytes from warp fifo */
+ if (!((long)buf & 0x03)) {
+ insl (EPPDATA (port), buf, 4);
+ } else {
+ insb (EPPDATA (port), buf, 16);
+ }
+ buf += 16;
+ got += 16;
+ left -= 16;
+ } else {
+ /* grab single byte from the warp fifo */
+ *((char *)buf) = inb (EPPDATA (port));
+ buf++;
+ got++;
+ left--;
+ }
+ status = inb (STATUS (port));
+ if (status & 0x01) {
+ /* EPP timeout should never occur... */
+ printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
+ "w91284pic (should not have done)\n", port->name);
+ clear_epp_timeout (port);
+ }
+ }
+ return got;
+ }
+ if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+ if (!(((long)buf | length) & 0x03)) {
+ insl (EPPDATA (port), buf, (length >> 2));
+ } else {
+ insb (EPPDATA (port), buf, length);
+ }
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ return -EIO;
+ }
+ return length;
+ }
+ for (; got < length; got++) {
+ *((char*)buf) = inb (EPPDATA(port));
+ buf++;
+ if (inb (STATUS (port)) & 0x01) {
+ /* EPP timeout */
+ clear_epp_timeout (port);
+ break;
+ }
+ }
+
+ return got;
+}
+
+static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
+ size_t length, int flags)
+{
+ size_t written = 0;
+
+ if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+ if (!(((long)buf | length) & 0x03)) {
+ outsl (EPPDATA (port), buf, (length >> 2));
+ } else {
+ outsb (EPPDATA (port), buf, length);
+ }
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ return -EIO;
+ }
+ return length;
+ }
+ for (; written < length; written++) {
+ outb (*((char*)buf), EPPDATA(port));
+ buf++;
+ if (inb (STATUS(port)) & 0x01) {
+ clear_epp_timeout (port);
+ break;
+ }
+ }
+
+ return written;
+}
+
+static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+ size_t length, int flags)
+{
+ size_t got = 0;
+
+ if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+ insb (EPPADDR (port), buf, length);
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ return -EIO;
+ }
+ return length;
+ }
+ for (; got < length; got++) {
+ *((char*)buf) = inb (EPPADDR (port));
+ buf++;
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ break;
+ }
+ }
+
+ return got;
+}
+
+static size_t parport_pc_epp_write_addr (struct parport *port,
+ const void *buf, size_t length,
+ int flags)
+{
+ size_t written = 0;
+
+ if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+ outsb (EPPADDR (port), buf, length);
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ return -EIO;
+ }
+ return length;
+ }
+ for (; written < length; written++) {
+ outb (*((char*)buf), EPPADDR (port));
+ buf++;
+ if (inb (STATUS (port)) & 0x01) {
+ clear_epp_timeout (port);
+ break;
+ }
+ }
+
+ return written;
+}
+
+static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
+ size_t length, int flags)
+{
+ size_t got;
+
+ frob_set_mode (port, ECR_EPP);
+ parport_pc_data_reverse (port);
+ parport_pc_write_control (port, 0x4);
+ got = parport_pc_epp_read_data (port, buf, length, flags);
+ frob_set_mode (port, ECR_PS2);
+
+ return got;
+}
+
+static size_t parport_pc_ecpepp_write_data (struct parport *port,
+ const void *buf, size_t length,
+ int flags)
+{
+ size_t written;
+
+ frob_set_mode (port, ECR_EPP);
+ parport_pc_write_control (port, 0x4);
+ parport_pc_data_forward (port);
+ written = parport_pc_epp_write_data (port, buf, length, flags);
+ frob_set_mode (port, ECR_PS2);
+
+ return written;
+}
+
+static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
+ size_t length, int flags)
+{
+ size_t got;
+
+ frob_set_mode (port, ECR_EPP);
+ parport_pc_data_reverse (port);
+ parport_pc_write_control (port, 0x4);
+ got = parport_pc_epp_read_addr (port, buf, length, flags);
+ frob_set_mode (port, ECR_PS2);
+
+ return got;
+}
+
+static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+ const void *buf, size_t length,
+ int flags)
+{
+ size_t written;
+
+ frob_set_mode (port, ECR_EPP);
+ parport_pc_write_control (port, 0x4);
+ parport_pc_data_forward (port);
+ written = parport_pc_epp_write_addr (port, buf, length, flags);
+ frob_set_mode (port, ECR_PS2);
+
+ return written;
+}
+#endif /* IEEE 1284 support */
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+ const void *buf, size_t length)
+{
+ int ret = 0;
+ const unsigned char *bufp = buf;
+ size_t left = length;
+ unsigned long expire = jiffies + port->physport->cad->timeout;
+ const int fifo = FIFO (port);
+ int poll_for = 8; /* 80 usecs */
+ const struct parport_pc_private *priv = port->physport->private_data;
+ const int fifo_depth = priv->fifo_depth;
+
+ port = port->physport;
+
+ /* We don't want to be interrupted every character. */
+ parport_pc_disable_irq (port);
+ /* set nErrIntrEn and serviceIntr */
+ frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+ /* Forward mode. */
+ parport_pc_data_forward (port); /* Must be in PS2 mode */
+
+ while (left) {
+ unsigned char byte;
+ unsigned char ecrval = inb (ECONTROL (port));
+ int i = 0;
+
+ if (need_resched() && time_before (jiffies, expire))
+ /* Can't yield the port. */
+ schedule ();
+
+ /* Anyone else waiting for the port? */
+ if (port->waithead) {
+ printk (KERN_DEBUG "Somebody wants the port\n");
+ break;
+ }
+
+ if (ecrval & 0x02) {
+ /* FIFO is full. Wait for interrupt. */
+
+ /* Clear serviceIntr */
+ ECR_WRITE (port, ecrval & ~(1<<2));
+ false_alarm:
+ ret = parport_wait_event (port, HZ);
+ if (ret < 0) break;
+ ret = 0;
+ if (!time_before (jiffies, expire)) {
+ /* Timed out. */
+ printk (KERN_DEBUG "FIFO write timed out\n");
+ break;
+ }
+ ecrval = inb (ECONTROL (port));
+ if (!(ecrval & (1<<2))) {
+ if (need_resched() &&
+ time_before (jiffies, expire))
+ schedule ();
+
+ goto false_alarm;
+ }
+
+ continue;
+ }
+
+ /* Can't fail now. */
+ expire = jiffies + port->cad->timeout;
+
+ poll:
+ if (signal_pending (current))
+ break;
+
+ if (ecrval & 0x01) {
+ /* FIFO is empty. Blast it full. */
+ const int n = left < fifo_depth ? left : fifo_depth;
+ outsb (fifo, bufp, n);
+ bufp += n;
+ left -= n;
+
+ /* Adjust the poll time. */
+ if (i < (poll_for - 2)) poll_for--;
+ continue;
+ } else if (i++ < poll_for) {
+ udelay (10);
+ ecrval = inb (ECONTROL (port));
+ goto poll;
+ }
+
+ /* Half-full (call me an optimist) */
+ byte = *bufp++;
+ outb (byte, fifo);
+ left--;
+ }
+
+dump_parport_state ("leave fifo_write_block_pio", port);
+ return length - left;
+}
+
+static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+ const void *buf, size_t length)
+{
+ int ret = 0;
+ unsigned long dmaflag;
+ size_t left = length;
+ const struct parport_pc_private *priv = port->physport->private_data;
+ dma_addr_t dma_addr, dma_handle;
+ size_t maxlen = 0x10000; /* max 64k per DMA transfer */
+ unsigned long start = (unsigned long) buf;
+ unsigned long end = (unsigned long) buf + length - 1;
+
+dump_parport_state ("enter fifo_write_block_dma", port);
+ if (end < MAX_DMA_ADDRESS) {
+ /* If it would cross a 64k boundary, cap it at the end. */
+ if ((start ^ end) & ~0xffffUL)
+ maxlen = 0x10000 - (start & 0xffff);
+
+ dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length,
+ PCI_DMA_TODEVICE);
+ } else {
+ /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+ maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */
+ dma_addr = priv->dma_handle;
+ dma_handle = 0;
+ }
+
+ port = port->physport;
+
+ /* We don't want to be interrupted every character. */
+ parport_pc_disable_irq (port);
+ /* set nErrIntrEn and serviceIntr */
+ frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+ /* Forward mode. */
+ parport_pc_data_forward (port); /* Must be in PS2 mode */
+
+ while (left) {
+ unsigned long expire = jiffies + port->physport->cad->timeout;
+
+ size_t count = left;
+
+ if (count > maxlen)
+ count = maxlen;
+
+ if (!dma_handle) /* bounce buffer ! */
+ memcpy(priv->dma_buf, buf, count);
+
+ dmaflag = claim_dma_lock();
+ disable_dma(port->dma);
+ clear_dma_ff(port->dma);
+ set_dma_mode(port->dma, DMA_MODE_WRITE);
+ set_dma_addr(port->dma, dma_addr);
+ set_dma_count(port->dma, count);
+
+ /* Set DMA mode */
+ frob_econtrol (port, 1<<3, 1<<3);
+
+ /* Clear serviceIntr */
+ frob_econtrol (port, 1<<2, 0);
+
+ enable_dma(port->dma);
+ release_dma_lock(dmaflag);
+
+ /* assume DMA will be successful */
+ left -= count;
+ buf += count;
+ if (dma_handle) dma_addr += count;
+
+ /* Wait for interrupt. */
+ false_alarm:
+ ret = parport_wait_event (port, HZ);
+ if (ret < 0) break;
+ ret = 0;
+ if (!time_before (jiffies, expire)) {
+ /* Timed out. */
+ printk (KERN_DEBUG "DMA write timed out\n");
+ break;
+ }
+ /* Is serviceIntr set? */
+ if (!(inb (ECONTROL (port)) & (1<<2))) {
+ cond_resched();
+
+ goto false_alarm;
+ }
+
+ dmaflag = claim_dma_lock();
+ disable_dma(port->dma);
+ clear_dma_ff(port->dma);
+ count = get_dma_residue(port->dma);
+ release_dma_lock(dmaflag);
+
+ cond_resched(); /* Can't yield the port. */
+
+ /* Anyone else waiting for the port? */
+ if (port->waithead) {
+ printk (KERN_DEBUG "Somebody wants the port\n");
+ break;
+ }
+
+ /* update for possible DMA residue ! */
+ buf -= count;
+ left += count;
+ if (dma_handle) dma_addr -= count;
+ }
+
+ /* Maybe got here through break, so adjust for DMA residue! */
+ dmaflag = claim_dma_lock();
+ disable_dma(port->dma);
+ clear_dma_ff(port->dma);
+ left += get_dma_residue(port->dma);
+ release_dma_lock(dmaflag);
+
+ /* Turn off DMA mode */
+ frob_econtrol (port, 1<<3, 0);
+
+ if (dma_handle)
+ pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE);
+
+dump_parport_state ("leave fifo_write_block_dma", port);
+ return length - left;
+}
+
+/* Parallel Port FIFO mode (ECP chipsets) */
+static size_t parport_pc_compat_write_block_pio (struct parport *port,
+ const void *buf, size_t length,
+ int flags)
+{
+ size_t written;
+ int r;
+ unsigned long expire;
+ const struct parport_pc_private *priv = port->physport->private_data;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_write_compat (port, buf,
+ length, flags);
+
+ /* Set up parallel port FIFO mode.*/
+ parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
+ if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Write the data to the FIFO. */
+ if (port->dma != PARPORT_DMA_NONE)
+ written = parport_pc_fifo_write_block_dma (port, buf, length);
+ else
+ written = parport_pc_fifo_write_block_pio (port, buf, length);
+
+ /* Finish up. */
+ /* For some hardware we don't want to touch the mode until
+ * the FIFO is empty, so allow 4 seconds for each position
+ * in the fifo.
+ */
+ expire = jiffies + (priv->fifo_depth * HZ * 4);
+ do {
+ /* Wait for the FIFO to empty */
+ r = change_mode (port, ECR_PS2);
+ if (r != -EBUSY) {
+ break;
+ }
+ } while (time_before (jiffies, expire));
+ if (r == -EBUSY) {
+
+ printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+ /* Prevent further data transfer. */
+ frob_set_mode (port, ECR_TST);
+
+ /* Adjust for the contents of the FIFO. */
+ for (written -= priv->fifo_depth; ; written++) {
+ if (inb (ECONTROL (port)) & 0x2) {
+ /* Full up. */
+ break;
+ }
+ outb (0, FIFO (port));
+ }
+
+ /* Reset the FIFO and return to PS2 mode. */
+ frob_set_mode (port, ECR_PS2);
+ }
+
+ r = parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY);
+ if (r)
+ printk (KERN_DEBUG
+ "%s: BUSY timeout (%d) in compat_write_block_pio\n",
+ port->name, r);
+
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+/* ECP */
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+ const void *buf, size_t length,
+ int flags)
+{
+ size_t written;
+ int r;
+ unsigned long expire;
+ const struct parport_pc_private *priv = port->physport->private_data;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_ecp_write_data (port, buf,
+ length, flags);
+
+ /* Switch to forward mode if necessary. */
+ if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+ /* Event 47: Set nInit high. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_INIT
+ | PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_INIT
+ | PARPORT_CONTROL_AUTOFD);
+
+ /* Event 49: PError goes high. */
+ r = parport_wait_peripheral (port,
+ PARPORT_STATUS_PAPEROUT,
+ PARPORT_STATUS_PAPEROUT);
+ if (r) {
+ printk (KERN_DEBUG "%s: PError timeout (%d) "
+ "in ecp_write_block_pio\n", port->name, r);
+ }
+ }
+
+ /* Set up ECP parallel port mode.*/
+ parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD,
+ 0);
+ r = change_mode (port, ECR_ECP); /* ECP FIFO */
+ if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Write the data to the FIFO. */
+ if (port->dma != PARPORT_DMA_NONE)
+ written = parport_pc_fifo_write_block_dma (port, buf, length);
+ else
+ written = parport_pc_fifo_write_block_pio (port, buf, length);
+
+ /* Finish up. */
+ /* For some hardware we don't want to touch the mode until
+ * the FIFO is empty, so allow 4 seconds for each position
+ * in the fifo.
+ */
+ expire = jiffies + (priv->fifo_depth * (HZ * 4));
+ do {
+ /* Wait for the FIFO to empty */
+ r = change_mode (port, ECR_PS2);
+ if (r != -EBUSY) {
+ break;
+ }
+ } while (time_before (jiffies, expire));
+ if (r == -EBUSY) {
+
+ printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+ /* Prevent further data transfer. */
+ frob_set_mode (port, ECR_TST);
+
+ /* Adjust for the contents of the FIFO. */
+ for (written -= priv->fifo_depth; ; written++) {
+ if (inb (ECONTROL (port)) & 0x2) {
+ /* Full up. */
+ break;
+ }
+ outb (0, FIFO (port));
+ }
+
+ /* Reset the FIFO and return to PS2 mode. */
+ frob_set_mode (port, ECR_PS2);
+
+ /* Host transfer recovery. */
+ parport_pc_data_reverse (port); /* Must be in PS2 mode */
+ udelay (5);
+ parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+ if (r)
+ printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+ "in ecp_write_block_pio\n", port->name, r);
+
+ parport_frob_control (port,
+ PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ r = parport_wait_peripheral (port,
+ PARPORT_STATUS_PAPEROUT,
+ PARPORT_STATUS_PAPEROUT);
+ if (r)
+ printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+ "in ecp_write_block_pio\n", port->name, r);
+ }
+
+ r = parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY);
+ if(r)
+ printk (KERN_DEBUG
+ "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
+ port->name, r);
+
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+#if 0
+static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+ void *buf, size_t length,
+ int flags)
+{
+ size_t left = length;
+ size_t fifofull;
+ int r;
+ const int fifo = FIFO(port);
+ const struct parport_pc_private *priv = port->physport->private_data;
+ const int fifo_depth = priv->fifo_depth;
+ char *bufp = buf;
+
+ port = port->physport;
+DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+dump_parport_state ("enter fcn", port);
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_ecp_read_data (port, buf,
+ length, flags);
+
+ if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
+ /* If the peripheral is allowed to send RLE compressed
+ * data, it is possible for a byte to expand to 128
+ * bytes in the FIFO. */
+ fifofull = 128;
+ } else {
+ fifofull = fifo_depth;
+ }
+
+ /* If the caller wants less than a full FIFO's worth of data,
+ * go through software emulation. Otherwise we may have to throw
+ * away data. */
+ if (length < fifofull)
+ return parport_ieee1284_ecp_read_data (port, buf,
+ length, flags);
+
+ if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
+ /* change to reverse-idle phase (must be in forward-idle) */
+
+ /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD
+ | PARPORT_CONTROL_STROBE,
+ PARPORT_CONTROL_AUTOFD);
+ parport_pc_data_reverse (port); /* Must be in PS2 mode */
+ udelay (5);
+ /* Event 39: Set nInit low to initiate bus reversal */
+ parport_frob_control (port,
+ PARPORT_CONTROL_INIT,
+ 0);
+ /* Event 40: Wait for nAckReverse (PError) to go low */
+ r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+ if (r) {
+ printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+ "in ecp_read_block_pio\n", port->name, r);
+ return 0;
+ }
+ }
+
+ /* Set up ECP FIFO mode.*/
+/* parport_pc_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD); */
+ r = change_mode (port, ECR_ECP); /* ECP FIFO */
+ if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+
+ port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+ /* the first byte must be collected manually */
+dump_parport_state ("pre 43", port);
+ /* Event 43: Wait for nAck to go low */
+ r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+ if (r) {
+ /* timed out while reading -- no data */
+ printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+ goto out_no_data;
+ }
+ /* read byte */
+ *bufp++ = inb (DATA (port));
+ left--;
+dump_parport_state ("43-44", port);
+ /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
+ parport_pc_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ 0);
+dump_parport_state ("pre 45", port);
+ /* Event 45: Wait for nAck to go high */
+/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
+dump_parport_state ("post 45", port);
+r = 0;
+ if (r) {
+ /* timed out while waiting for peripheral to respond to ack */
+ printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+
+ /* keep hold of the byte we've got already */
+ goto out_no_data;
+ }
+ /* Event 46: nAutoFd (HostAck) goes low to accept more data */
+ parport_pc_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+
+
+dump_parport_state ("rev idle", port);
+ /* Do the transfer. */
+ while (left > fifofull) {
+ int ret;
+ unsigned long expire = jiffies + port->cad->timeout;
+ unsigned char ecrval = inb (ECONTROL (port));
+
+ if (need_resched() && time_before (jiffies, expire))
+ /* Can't yield the port. */
+ schedule ();
+
+ /* At this point, the FIFO may already be full. In
+ * that case ECP is already holding back the
+ * peripheral (assuming proper design) with a delayed
+ * handshake. Work fast to avoid a peripheral
+ * timeout. */
+
+ if (ecrval & 0x01) {
+ /* FIFO is empty. Wait for interrupt. */
+dump_parport_state ("FIFO empty", port);
+
+ /* Anyone else waiting for the port? */
+ if (port->waithead) {
+ printk (KERN_DEBUG "Somebody wants the port\n");
+ break;
+ }
+
+ /* Clear serviceIntr */
+ ECR_WRITE (port, ecrval & ~(1<<2));
+ false_alarm:
+dump_parport_state ("waiting", port);
+ ret = parport_wait_event (port, HZ);
+DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+ if (ret < 0)
+ break;
+ ret = 0;
+ if (!time_before (jiffies, expire)) {
+ /* Timed out. */
+dump_parport_state ("timeout", port);
+ printk (KERN_DEBUG "PIO read timed out\n");
+ break;
+ }
+ ecrval = inb (ECONTROL (port));
+ if (!(ecrval & (1<<2))) {
+ if (need_resched() &&
+ time_before (jiffies, expire)) {
+ schedule ();
+ }
+ goto false_alarm;
+ }
+
+ /* Depending on how the FIFO threshold was
+ * set, how long interrupt service took, and
+ * how fast the peripheral is, we might be
+ * lucky and have a just filled FIFO. */
+ continue;
+ }
+
+ if (ecrval & 0x02) {
+ /* FIFO is full. */
+dump_parport_state ("FIFO full", port);
+ insb (fifo, bufp, fifo_depth);
+ bufp += fifo_depth;
+ left -= fifo_depth;
+ continue;
+ }
+
+DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+
+ /* FIFO not filled. We will cycle this loop for a while
+ * and either the peripheral will fill it faster,
+ * tripping a fast empty with insb, or we empty it. */
+ *bufp++ = inb (fifo);
+ left--;
+ }
+
+ /* scoop up anything left in the FIFO */
+ while (left && !(inb (ECONTROL (port) & 0x01))) {
+ *bufp++ = inb (fifo);
+ left--;
+ }
+
+ port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+dump_parport_state ("rev idle2", port);
+
+out_no_data:
+
+ /* Go to forward idle mode to shut the peripheral up (event 47). */
+ parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+
+ /* event 49: PError goes high */
+ r = parport_wait_peripheral (port,
+ PARPORT_STATUS_PAPEROUT,
+ PARPORT_STATUS_PAPEROUT);
+ if (r) {
+ printk (KERN_DEBUG
+ "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
+ port->name, r);
+ }
+
+ port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ /* Finish up. */
+ {
+ int lost = get_fifo_residue (port);
+ if (lost)
+ /* Shouldn't happen with compliant peripherals. */
+ printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+ port->name, lost);
+ }
+
+dump_parport_state ("fwd idle", port);
+ return length - left;
+}
+#endif /* 0 */
+#endif /* IEEE 1284 support */
+#endif /* Allowed to use FIFO/DMA */
+
+
+/*
+ * ******************************************
+ * INITIALISATION AND MODULE STUFF BELOW HERE
+ * ******************************************
+ */
+
+/* GCC is not inlining extern inline function later overwriten to non-inline,
+ so we use outlined_ variants here. */
+static struct parport_operations parport_pc_ops =
+{
+ .write_data = parport_pc_write_data,
+ .read_data = parport_pc_read_data,
+
+ .write_control = parport_pc_write_control,
+ .read_control = parport_pc_read_control,
+ .frob_control = parport_pc_frob_control,
+
+ .read_status = parport_pc_read_status,
+
+ .enable_irq = parport_pc_enable_irq,
+ .disable_irq = parport_pc_disable_irq,
+
+ .data_forward = parport_pc_data_forward,
+ .data_reverse = parport_pc_data_reverse,
+
+ .init_state = parport_pc_init_state,
+ .save_state = parport_pc_save_state,
+ .restore_state = parport_pc_restore_state,
+
+ .epp_write_data = parport_ieee1284_epp_write_data,
+ .epp_read_data = parport_ieee1284_epp_read_data,
+ .epp_write_addr = parport_ieee1284_epp_write_addr,
+ .epp_read_addr = parport_ieee1284_epp_read_addr,
+
+ .ecp_write_data = parport_ieee1284_ecp_write_data,
+ .ecp_read_data = parport_ieee1284_ecp_read_data,
+ .ecp_write_addr = parport_ieee1284_ecp_write_addr,
+
+ .compat_write_data = parport_ieee1284_write_compat,
+ .nibble_read_data = parport_ieee1284_read_nibble,
+ .byte_read_data = parport_ieee1284_read_byte,
+
+ .owner = THIS_MODULE,
+};
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+/* Super-IO chipset detection, Winbond, SMSC */
+static void __devinit show_parconfig_smsc37c669(int io, int key)
+{
+ int cr1,cr4,cra,cr23,cr26,cr27,i=0;
+ static const char *modes[]={ "SPP and Bidirectional (PS/2)",
+ "EPP and SPP",
+ "ECP",
+ "ECP and EPP" };
+
+ outb(key,io);
+ outb(key,io);
+ outb(1,io);
+ cr1=inb(io+1);
+ outb(4,io);
+ cr4=inb(io+1);
+ outb(0x0a,io);
+ cra=inb(io+1);
+ outb(0x23,io);
+ cr23=inb(io+1);
+ outb(0x26,io);
+ cr26=inb(io+1);
+ outb(0x27,io);
+ cr27=inb(io+1);
+ outb(0xaa,io);
+
+ if (verbose_probing) {
+ printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+ "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
+ cr1,cr4,cra,cr23,cr26,cr27);
+
+ /* The documentation calls DMA and IRQ-Lines by letters, so
+ the board maker can/will wire them
+ appropriately/randomly... G=reserved H=IDE-irq, */
+ printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
+ "fifo threshold=%d\n", cr23*4,
+ (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
+ (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+ printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
+ (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
+ printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+ (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03],
+ (cr4 & 0x40) ? "1.7" : "1.9");
+ }
+
+ /* Heuristics ! BIOS setup for this mainboard device limits
+ the choices to standard settings, i.e. io-address and IRQ
+ are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
+ DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
+ if(cr23*4 >=0x100) { /* if active */
+ while((superios[i].io!= 0) && (i<NR_SUPERIOS))
+ i++;
+ if(i==NR_SUPERIOS)
+ printk(KERN_INFO "Super-IO: too many chips!\n");
+ else {
+ int d;
+ switch (cr23*4) {
+ case 0x3bc:
+ superios[i].io = 0x3bc;
+ superios[i].irq = 7;
+ break;
+ case 0x378:
+ superios[i].io = 0x378;
+ superios[i].irq = 7;
+ break;
+ case 0x278:
+ superios[i].io = 0x278;
+ superios[i].irq = 5;
+ }
+ d=(cr26 &0x0f);
+ if((d==1) || (d==3))
+ superios[i].dma= d;
+ else
+ superios[i].dma= PARPORT_DMA_NONE;
+ }
+ }
+}
+
+
+static void __devinit show_parconfig_winbond(int io, int key)
+{
+ int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+ static const char *modes[] = {
+ "Standard (SPP) and Bidirectional(PS/2)", /* 0 */
+ "EPP-1.9 and SPP",
+ "ECP",
+ "ECP and EPP-1.9",
+ "Standard (SPP)",
+ "EPP-1.7 and SPP", /* 5 */
+ "undefined!",
+ "ECP and EPP-1.7" };
+ static char *irqtypes[] = { "pulsed low, high-Z", "follows nACK" };
+
+ /* The registers are called compatible-PnP because the
+ register layout is modelled after ISA-PnP, the access
+ method is just another ... */
+ outb(key,io);
+ outb(key,io);
+ outb(0x07,io); /* Register 7: Select Logical Device */
+ outb(0x01,io+1); /* LD1 is Parallel Port */
+ outb(0x30,io);
+ cr30=inb(io+1);
+ outb(0x60,io);
+ cr60=inb(io+1);
+ outb(0x61,io);
+ cr61=inb(io+1);
+ outb(0x70,io);
+ cr70=inb(io+1);
+ outb(0x74,io);
+ cr74=inb(io+1);
+ outb(0xf0,io);
+ crf0=inb(io+1);
+ outb(0xaa,io);
+
+ if (verbose_probing) {
+ printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
+ "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
+ printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+ (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+ if ((cr74 & 0x07) > 3)
+ printk("dma=none\n");
+ else
+ printk("dma=%d\n",cr74 & 0x07);
+ printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+ irqtypes[crf0>>7], (crf0>>3)&0x0f);
+ printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+ }
+
+ if(cr30 & 0x01) { /* the settings can be interrogated later ... */
+ while((superios[i].io!= 0) && (i<NR_SUPERIOS))
+ i++;
+ if(i==NR_SUPERIOS)
+ printk(KERN_INFO "Super-IO: too many chips!\n");
+ else {
+ superios[i].io = (cr60<<8)|cr61;
+ superios[i].irq = cr70&0x0f;
+ superios[i].dma = (((cr74 & 0x07) > 3) ?
+ PARPORT_DMA_NONE : (cr74 & 0x07));
+ }
+ }
+}
+
+static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+{
+ const char *type = "unknown";
+ int id,progif=2;
+
+ if (devid == devrev)
+ /* simple heuristics, we happened to read some
+ non-winbond register */
+ return;
+
+ id=(devid<<8) | devrev;
+
+ /* Values are from public data sheets pdf files, I can just
+ confirm 83977TF is correct :-) */
+ if (id == 0x9771) type="83977F/AF";
+ else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
+ else if (id == 0x9774) type="83977ATF";
+ else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
+ else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
+ else if ((id & ~0x0f) == 0x5210) type="83627";
+ else if ((id & ~0x0f) == 0x6010) type="83697HF";
+ else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
+ else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
+ else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
+ else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
+ else progif=0;
+
+ if (verbose_probing)
+ printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
+ "devid=%02x devrev=%02x oldid=%02x type=%s\n",
+ efer, key, devid, devrev, oldid, type);
+
+ if (progif == 2)
+ show_parconfig_winbond(efer,key);
+}
+
+static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
+{
+ const char *type = "unknown";
+ void (*func)(int io, int key);
+ int id;
+
+ if (devid == devrev)
+ /* simple heuristics, we happened to read some
+ non-smsc register */
+ return;
+
+ func=NULL;
+ id=(devid<<8) | devrev;
+
+ if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
+ else if (id==0x6582) type="37c665IR";
+ else if (devid==0x65) type="37c665GT";
+ else if (devid==0x66) type="37c666GT";
+
+ if (verbose_probing)
+ printk(KERN_INFO "SMSC chip at EFER=0x%x "
+ "key=0x%02x devid=%02x devrev=%02x type=%s\n",
+ efer, key, devid, devrev, type);
+
+ if (func)
+ func(efer,key);
+}
+
+
+static void __devinit winbond_check(int io, int key)
+{
+ int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+
+ if (!request_region(io, 3, __FUNCTION__))
+ return;
+
+ /* First probe without key */
+ outb(0x20,io);
+ x_devid=inb(io+1);
+ outb(0x21,io);
+ x_devrev=inb(io+1);
+ outb(0x09,io);
+ x_oldid=inb(io+1);
+
+ outb(key,io);
+ outb(key,io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x20,io); /* Write EFIR, extended function index register */
+ devid=inb(io+1); /* Read EFDR, extended function data register */
+ outb(0x21,io);
+ devrev=inb(io+1);
+ outb(0x09,io);
+ oldid=inb(io+1);
+ outb(0xaa,io); /* Magic Seal */
+
+ if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+ goto out; /* protection against false positives */
+
+ decode_winbond(io,key,devid,devrev,oldid);
+out:
+ release_region(io, 3);
+}
+
+static void __devinit winbond_check2(int io,int key)
+{
+ int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+
+ if (!request_region(io, 3, __FUNCTION__))
+ return;
+
+ /* First probe without the key */
+ outb(0x20,io+2);
+ x_devid=inb(io+2);
+ outb(0x21,io+1);
+ x_devrev=inb(io+2);
+ outb(0x09,io+1);
+ x_oldid=inb(io+2);
+
+ outb(key,io); /* Write Magic Byte to EFER, extended
+ funtion enable register */
+ outb(0x20,io+2); /* Write EFIR, extended function index register */
+ devid=inb(io+2); /* Read EFDR, extended function data register */
+ outb(0x21,io+1);
+ devrev=inb(io+2);
+ outb(0x09,io+1);
+ oldid=inb(io+2);
+ outb(0xaa,io); /* Magic Seal */
+
+ if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+ goto out; /* protection against false positives */
+
+ decode_winbond(io,key,devid,devrev,oldid);
+out:
+ release_region(io, 3);
+}
+
+static void __devinit smsc_check(int io, int key)
+{
+ int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+
+ if (!request_region(io, 3, __FUNCTION__))
+ return;
+
+ /* First probe without the key */
+ outb(0x0d,io);
+ x_oldid=inb(io+1);
+ outb(0x0e,io);
+ x_oldrev=inb(io+1);
+ outb(0x20,io);
+ x_id=inb(io+1);
+ outb(0x21,io);
+ x_rev=inb(io+1);
+
+ outb(key,io);
+ outb(key,io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x0d,io); /* Write EFIR, extended function index register */
+ oldid=inb(io+1); /* Read EFDR, extended function data register */
+ outb(0x0e,io);
+ oldrev=inb(io+1);
+ outb(0x20,io);
+ id=inb(io+1);
+ outb(0x21,io);
+ rev=inb(io+1);
+ outb(0xaa,io); /* Magic Seal */
+
+ if ((x_id == id) && (x_oldrev == oldrev) &&
+ (x_oldid == oldid) && (x_rev == rev))
+ goto out; /* protection against false positives */
+
+ decode_smsc(io,key,oldid,oldrev);
+out:
+ release_region(io, 3);
+}
+
+
+static void __devinit detect_and_report_winbond (void)
+{
+ if (verbose_probing)
+ printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
+ winbond_check(0x3f0,0x87);
+ winbond_check(0x370,0x87);
+ winbond_check(0x2e ,0x87);
+ winbond_check(0x4e ,0x87);
+ winbond_check(0x3f0,0x86);
+ winbond_check2(0x250,0x88);
+ winbond_check2(0x250,0x89);
+}
+
+static void __devinit detect_and_report_smsc (void)
+{
+ if (verbose_probing)
+ printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
+ smsc_check(0x3f0,0x55);
+ smsc_check(0x370,0x55);
+ smsc_check(0x3f0,0x44);
+ smsc_check(0x370,0x44);
+}
+#endif /* CONFIG_PARPORT_PC_SUPERIO */
+
+static int __devinit get_superio_dma (struct parport *p)
+{
+ int i=0;
+ while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
+ i++;
+ if (i!=NR_SUPERIOS)
+ return superios[i].dma;
+ return PARPORT_DMA_NONE;
+}
+
+static int __devinit get_superio_irq (struct parport *p)
+{
+ int i=0;
+ while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
+ i++;
+ if (i!=NR_SUPERIOS)
+ return superios[i].irq;
+ return PARPORT_IRQ_NONE;
+}
+
+
+/* --- Mode detection ------------------------------------- */
+
+/*
+ * Checks for port existence, all ports support SPP MODE
+ * Returns:
+ * 0 : No parallel port at this address
+ * PARPORT_MODE_PCSPP : SPP port detected
+ * (if the user specified an ioport himself,
+ * this shall always be the case!)
+ *
+ */
+static int __devinit parport_SPP_supported(struct parport *pb)
+{
+ unsigned char r, w;
+
+ /*
+ * first clear an eventually pending EPP timeout
+ * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
+ * that does not even respond to SPP cycles if an EPP
+ * timeout is pending
+ */
+ clear_epp_timeout(pb);
+
+ /* Do a simple read-write test to make sure the port exists. */
+ w = 0xc;
+ outb (w, CONTROL (pb));
+
+ /* Is there a control register that we can read from? Some
+ * ports don't allow reads, so read_control just returns a
+ * software copy. Some ports _do_ allow reads, so bypass the
+ * software copy here. In addition, some bits aren't
+ * writable. */
+ r = inb (CONTROL (pb));
+ if ((r & 0xf) == w) {
+ w = 0xe;
+ outb (w, CONTROL (pb));
+ r = inb (CONTROL (pb));
+ outb (0xc, CONTROL (pb));
+ if ((r & 0xf) == w)
+ return PARPORT_MODE_PCSPP;
+ }
+
+ if (user_specified)
+ /* That didn't work, but the user thinks there's a
+ * port here. */
+ printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+ "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+
+ /* Try the data register. The data lines aren't tri-stated at
+ * this stage, so we expect back what we wrote. */
+ w = 0xaa;
+ parport_pc_write_data (pb, w);
+ r = parport_pc_read_data (pb);
+ if (r == w) {
+ w = 0x55;
+ parport_pc_write_data (pb, w);
+ r = parport_pc_read_data (pb);
+ if (r == w)
+ return PARPORT_MODE_PCSPP;
+ }
+
+ if (user_specified) {
+ /* Didn't work, but the user is convinced this is the
+ * place. */
+ printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+ "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+ printk (KERN_INFO "parport 0x%lx: You gave this address, "
+ "but there is probably no parallel port there!\n",
+ pb->base);
+ }
+
+ /* It's possible that we can't read the control register or
+ * the data register. In that case just believe the user. */
+ if (user_specified)
+ return PARPORT_MODE_PCSPP;
+
+ return 0;
+}
+
+/* Check for ECR
+ *
+ * Old style XT ports alias io ports every 0x400, hence accessing ECR
+ * on these cards actually accesses the CTR.
+ *
+ * Modern cards don't do this but reading from ECR will return 0xff
+ * regardless of what is written here if the card does NOT support
+ * ECP.
+ *
+ * We first check to see if ECR is the same as CTR. If not, the low
+ * two bits of ECR aren't writable, so we check by writing ECR and
+ * reading it back to see if it's what we expect.
+ */
+static int __devinit parport_ECR_present(struct parport *pb)
+{
+ struct parport_pc_private *priv = pb->private_data;
+ unsigned char r = 0xc;
+
+ outb (r, CONTROL (pb));
+ if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
+ outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+
+ r = inb (CONTROL (pb));
+ if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+ goto no_reg; /* Sure that no ECR register exists */
+ }
+
+ if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+ goto no_reg;
+
+ ECR_WRITE (pb, 0x34);
+ if (inb (ECONTROL (pb)) != 0x35)
+ goto no_reg;
+
+ priv->ecr = 1;
+ outb (0xc, CONTROL (pb));
+
+ /* Go to mode 000 */
+ frob_set_mode (pb, ECR_SPP);
+
+ return 1;
+
+ no_reg:
+ outb (0xc, CONTROL (pb));
+ return 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Detect PS/2 support.
+ *
+ * Bit 5 (0x20) sets the PS/2 data direction; setting this high
+ * allows us to read data from the data lines. In theory we would get back
+ * 0xff but any peripheral attached to the port may drag some or all of the
+ * lines down to zero. So if we get back anything that isn't the contents
+ * of the data register we deem PS/2 support to be present.
+ *
+ * Some SPP ports have "half PS/2" ability - you can't turn off the line
+ * drivers, but an external peripheral with sufficiently beefy drivers of
+ * its own can overpower them and assert its own levels onto the bus, from
+ * where they can then be read back as normal. Ports with this property
+ * and the right type of device attached are likely to fail the SPP test,
+ * (as they will appear to have stuck bits) and so the fact that they might
+ * be misdetected here is rather academic.
+ */
+
+static int __devinit parport_PS2_supported(struct parport *pb)
+{
+ int ok = 0;
+
+ clear_epp_timeout(pb);
+
+ /* try to tri-state the buffer */
+ parport_pc_data_reverse (pb);
+
+ parport_pc_write_data(pb, 0x55);
+ if (parport_pc_read_data(pb) != 0x55) ok++;
+
+ parport_pc_write_data(pb, 0xaa);
+ if (parport_pc_read_data(pb) != 0xaa) ok++;
+
+ /* cancel input mode */
+ parport_pc_data_forward (pb);
+
+ if (ok) {
+ pb->modes |= PARPORT_MODE_TRISTATE;
+ } else {
+ struct parport_pc_private *priv = pb->private_data;
+ priv->ctr_writable &= ~0x20;
+ }
+
+ return ok;
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int __devinit parport_ECP_supported(struct parport *pb)
+{
+ int i;
+ int config, configb;
+ int pword;
+ struct parport_pc_private *priv = pb->private_data;
+ /* Translate ECP intrLine to ISA irq value */
+ static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 };
+
+ /* If there is no ECR, we have no hope of supporting ECP. */
+ if (!priv->ecr)
+ return 0;
+
+ /* Find out FIFO depth */
+ ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
+ for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
+ outb (0xaa, FIFO (pb));
+
+ /*
+ * Using LGS chipset it uses ECR register, but
+ * it doesn't support ECP or FIFO MODE
+ */
+ if (i == 1024) {
+ ECR_WRITE (pb, ECR_SPP << 5);
+ return 0;
+ }
+
+ priv->fifo_depth = i;
+ if (verbose_probing)
+ printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+
+ /* Find out writeIntrThreshold */
+ frob_econtrol (pb, 1<<2, 1<<2);
+ frob_econtrol (pb, 1<<2, 0);
+ for (i = 1; i <= priv->fifo_depth; i++) {
+ inb (FIFO (pb));
+ udelay (50);
+ if (inb (ECONTROL (pb)) & (1<<2))
+ break;
+ }
+
+ if (i <= priv->fifo_depth) {
+ if (verbose_probing)
+ printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+ pb->base, i);
+ } else
+ /* Number of bytes we know we can write if we get an
+ interrupt. */
+ i = 0;
+
+ priv->writeIntrThreshold = i;
+
+ /* Find out readIntrThreshold */
+ frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+ parport_pc_data_reverse (pb); /* Must be in PS2 mode */
+ frob_set_mode (pb, ECR_TST); /* Test FIFO */
+ frob_econtrol (pb, 1<<2, 1<<2);
+ frob_econtrol (pb, 1<<2, 0);
+ for (i = 1; i <= priv->fifo_depth; i++) {
+ outb (0xaa, FIFO (pb));
+ if (inb (ECONTROL (pb)) & (1<<2))
+ break;
+ }
+
+ if (i <= priv->fifo_depth) {
+ if (verbose_probing)
+ printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+ pb->base, i);
+ } else
+ /* Number of bytes we can read if we get an interrupt. */
+ i = 0;
+
+ priv->readIntrThreshold = i;
+
+ ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE (pb, 0xf4); /* Configuration mode */
+ config = inb (CONFIGA (pb));
+ pword = (config >> 4) & 0x7;
+ switch (pword) {
+ case 0:
+ pword = 2;
+ printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ pb->base);
+ break;
+ case 2:
+ pword = 4;
+ printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ pb->base);
+ break;
+ default:
+ printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+ pb->base);
+ /* Assume 1 */
+ case 1:
+ pword = 1;
+ }
+ priv->pword = pword;
+
+ if (verbose_probing) {
+ printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
+
+ printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+ config & 0x80 ? "Level" : "Pulses");
+
+ configb = inb (CONFIGB (pb));
+ printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+ pb->base, config, configb);
+ printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+ if ((configb >>3) & 0x07)
+ printk("%d",intrline[(configb >>3) & 0x07]);
+ else
+ printk("<none or set by other means>");
+ printk (" dma=");
+ if( (configb & 0x03 ) == 0x00)
+ printk("<none or set by other means>\n");
+ else
+ printk("%d\n",configb & 0x07);
+ }
+
+ /* Go back to mode 000 */
+ frob_set_mode (pb, ECR_SPP);
+
+ return 1;
+}
+#endif
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+ const struct parport_pc_private *priv = pb->private_data;
+ int result;
+ unsigned char oecr;
+
+ if (!priv->ecr)
+ return 0;
+
+ oecr = inb (ECONTROL (pb));
+ ECR_WRITE (pb, ECR_PS2 << 5);
+ result = parport_PS2_supported(pb);
+ ECR_WRITE (pb, oecr);
+ return result;
+}
+
+/* EPP mode detection */
+
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+ const struct parport_pc_private *priv = pb->private_data;
+
+ /*
+ * Theory:
+ * Bit 0 of STR is the EPP timeout bit, this bit is 0
+ * when EPP is possible and is set high when an EPP timeout
+ * occurs (EPP uses the HALT line to stop the CPU while it does
+ * the byte transfer, an EPP timeout occurs if the attached
+ * device fails to respond after 10 micro seconds).
+ *
+ * This bit is cleared by either reading it (National Semi)
+ * or writing a 1 to the bit (SMC, UMC, WinBond), others ???
+ * This bit is always high in non EPP modes.
+ */
+
+ /* If EPP timeout bit clear then EPP available */
+ if (!clear_epp_timeout(pb)) {
+ return 0; /* No way to clear timeout */
+ }
+
+ /* Check for Intel bug. */
+ if (priv->ecr) {
+ unsigned char i;
+ for (i = 0x00; i < 0x80; i += 0x20) {
+ ECR_WRITE (pb, i);
+ if (clear_epp_timeout (pb)) {
+ /* Phony EPP in ECP. */
+ return 0;
+ }
+ }
+ }
+
+ pb->modes |= PARPORT_MODE_EPP;
+
+ /* Set up access functions to use EPP hardware. */
+ pb->ops->epp_read_data = parport_pc_epp_read_data;
+ pb->ops->epp_write_data = parport_pc_epp_write_data;
+ pb->ops->epp_read_addr = parport_pc_epp_read_addr;
+ pb->ops->epp_write_addr = parport_pc_epp_write_addr;
+
+ return 1;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+ struct parport_pc_private *priv = pb->private_data;
+ int result;
+ unsigned char oecr;
+
+ if (!priv->ecr) {
+ return 0;
+ }
+
+ oecr = inb (ECONTROL (pb));
+ /* Search for SMC style EPP+ECP mode */
+ ECR_WRITE (pb, 0x80);
+ outb (0x04, CONTROL (pb));
+ result = parport_EPP_supported(pb);
+
+ ECR_WRITE (pb, oecr);
+
+ if (result) {
+ /* Set up access functions to use ECP+EPP hardware. */
+ pb->ops->epp_read_data = parport_pc_ecpepp_read_data;
+ pb->ops->epp_write_data = parport_pc_ecpepp_write_data;
+ pb->ops->epp_read_addr = parport_pc_ecpepp_read_addr;
+ pb->ops->epp_write_addr = parport_pc_ecpepp_write_addr;
+ }
+
+ return result;
+}
+
+#else /* No IEEE 1284 support */
+
+/* Don't bother probing for modes we know we won't use. */
+static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int __devinit parport_ECP_supported(struct parport *pb) { return 0; }
+#endif
+static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
+static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
+static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+
+#endif /* No IEEE 1284 support */
+
+/* --- IRQ detection -------------------------------------- */
+
+/* Only if supports ECP mode */
+static int __devinit programmable_irq_support(struct parport *pb)
+{
+ int irq, intrLine;
+ unsigned char oecr = inb (ECONTROL (pb));
+ static const int lookup[8] = {
+ PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
+ };
+
+ ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+
+ intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ irq = lookup[intrLine];
+
+ ECR_WRITE (pb, oecr);
+ return irq;
+}
+
+static int __devinit irq_probe_ECP(struct parport *pb)
+{
+ int i;
+ unsigned long irqs;
+
+ irqs = probe_irq_on();
+
+ ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
+ ECR_WRITE (pb, ECR_TST << 5);
+
+ /* If Full FIFO sure that writeIntrThreshold is generated */
+ for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++)
+ outb (0xaa, FIFO (pb));
+
+ pb->irq = probe_irq_off(irqs);
+ ECR_WRITE (pb, ECR_SPP << 5);
+
+ if (pb->irq <= 0)
+ pb->irq = PARPORT_IRQ_NONE;
+
+ return pb->irq;
+}
+
+/*
+ * This detection seems that only works in National Semiconductors
+ * This doesn't work in SMC, LGS, and Winbond
+ */
+static int __devinit irq_probe_EPP(struct parport *pb)
+{
+#ifndef ADVANCED_DETECT
+ return PARPORT_IRQ_NONE;
+#else
+ int irqs;
+ unsigned char oecr;
+
+ if (pb->modes & PARPORT_MODE_PCECR)
+ oecr = inb (ECONTROL (pb));
+
+ irqs = probe_irq_on();
+
+ if (pb->modes & PARPORT_MODE_PCECR)
+ frob_econtrol (pb, 0x10, 0x10);
+
+ clear_epp_timeout(pb);
+ parport_pc_frob_control (pb, 0x20, 0x20);
+ parport_pc_frob_control (pb, 0x10, 0x10);
+ clear_epp_timeout(pb);
+
+ /* Device isn't expecting an EPP read
+ * and generates an IRQ.
+ */
+ parport_pc_read_epp(pb);
+ udelay(20);
+
+ pb->irq = probe_irq_off (irqs);
+ if (pb->modes & PARPORT_MODE_PCECR)
+ ECR_WRITE (pb, oecr);
+ parport_pc_write_control(pb, 0xc);
+
+ if (pb->irq <= 0)
+ pb->irq = PARPORT_IRQ_NONE;
+
+ return pb->irq;
+#endif /* Advanced detection */
+}
+
+static int __devinit irq_probe_SPP(struct parport *pb)
+{
+ /* Don't even try to do this. */
+ return PARPORT_IRQ_NONE;
+}
+
+/* We will attempt to share interrupt requests since other devices
+ * such as sound cards and network cards seem to like using the
+ * printer IRQs.
+ *
+ * When ECP is available we can autoprobe for IRQs.
+ * NOTE: If we can autoprobe it, we can register the IRQ.
+ */
+static int __devinit parport_irq_probe(struct parport *pb)
+{
+ struct parport_pc_private *priv = pb->private_data;
+
+ if (priv->ecr) {
+ pb->irq = programmable_irq_support(pb);
+
+ if (pb->irq == PARPORT_IRQ_NONE)
+ pb->irq = irq_probe_ECP(pb);
+ }
+
+ if ((pb->irq == PARPORT_IRQ_NONE) && priv->ecr &&
+ (pb->modes & PARPORT_MODE_EPP))
+ pb->irq = irq_probe_EPP(pb);
+
+ clear_epp_timeout(pb);
+
+ if (pb->irq == PARPORT_IRQ_NONE && (pb->modes & PARPORT_MODE_EPP))
+ pb->irq = irq_probe_EPP(pb);
+
+ clear_epp_timeout(pb);
+
+ if (pb->irq == PARPORT_IRQ_NONE)
+ pb->irq = irq_probe_SPP(pb);
+
+ if (pb->irq == PARPORT_IRQ_NONE)
+ pb->irq = get_superio_irq(pb);
+
+ return pb->irq;
+}
+
+/* --- DMA detection -------------------------------------- */
+
+/* Only if chipset conforms to ECP ISA Interface Standard */
+static int __devinit programmable_dma_support (struct parport *p)
+{
+ unsigned char oecr = inb (ECONTROL (p));
+ int dma;
+
+ frob_set_mode (p, ECR_CNF);
+
+ dma = inb (CONFIGB(p)) & 0x07;
+ /* 000: Indicates jumpered 8-bit DMA if read-only.
+ 100: Indicates jumpered 16-bit DMA if read-only. */
+ if ((dma & 0x03) == 0)
+ dma = PARPORT_DMA_NONE;
+
+ ECR_WRITE (p, oecr);
+ return dma;
+}
+
+static int __devinit parport_dma_probe (struct parport *p)
+{
+ const struct parport_pc_private *priv = p->private_data;
+ if (priv->ecr)
+ p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+ if (p->dma == PARPORT_DMA_NONE) {
+ /* ask known Super-IO chips proper, although these
+ claim ECP compatible, some don't report their DMA
+ conforming to ECP standards */
+ p->dma = get_superio_dma(p);
+ }
+
+ return p->dma;
+}
+
+/* --- Initialisation code -------------------------------- */
+
+static LIST_HEAD(ports_list);
+static DEFINE_SPINLOCK(ports_lock);
+
+struct parport *parport_pc_probe_port (unsigned long int base,
+ unsigned long int base_hi,
+ int irq, int dma,
+ struct pci_dev *dev)
+{
+ struct parport_pc_private *priv;
+ struct parport_operations *ops;
+ struct parport *p;
+ int probedirq = PARPORT_IRQ_NONE;
+ struct resource *base_res;
+ struct resource *ECR_res = NULL;
+ struct resource *EPP_res = NULL;
+
+ ops = kmalloc(sizeof (struct parport_operations), GFP_KERNEL);
+ if (!ops)
+ goto out1;
+
+ priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
+ if (!priv)
+ goto out2;
+
+ /* a misnomer, actually - it's allocate and reserve parport number */
+ p = parport_register_port(base, irq, dma, ops);
+ if (!p)
+ goto out3;
+
+ base_res = request_region(base, 3, p->name);
+ if (!base_res)
+ goto out4;
+
+ memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+ priv->ctr = 0xc;
+ priv->ctr_writable = ~0x10;
+ priv->ecr = 0;
+ priv->fifo_depth = 0;
+ priv->dma_buf = NULL;
+ priv->dma_handle = 0;
+ priv->dev = dev;
+ INIT_LIST_HEAD(&priv->list);
+ priv->port = p;
+ p->base_hi = base_hi;
+ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+ p->private_data = priv;
+
+ if (base_hi) {
+ ECR_res = request_region(base_hi, 3, p->name);
+ if (ECR_res)
+ parport_ECR_present(p);
+ }
+
+ if (base != 0x3bc) {
+ EPP_res = request_region(base+0x3, 5, p->name);
+ if (EPP_res)
+ if (!parport_EPP_supported(p))
+ parport_ECPEPP_supported(p);
+ }
+ if (!parport_SPP_supported (p))
+ /* No port. */
+ goto out5;
+ if (priv->ecr)
+ parport_ECPPS2_supported(p);
+ else
+ parport_PS2_supported(p);
+
+ p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+
+ printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+ if (p->base_hi && priv->ecr)
+ printk(" (0x%lx)", p->base_hi);
+ if (p->irq == PARPORT_IRQ_AUTO) {
+ p->irq = PARPORT_IRQ_NONE;
+ parport_irq_probe(p);
+ } else if (p->irq == PARPORT_IRQ_PROBEONLY) {
+ p->irq = PARPORT_IRQ_NONE;
+ parport_irq_probe(p);
+ probedirq = p->irq;
+ p->irq = PARPORT_IRQ_NONE;
+ }
+ if (p->irq != PARPORT_IRQ_NONE) {
+ printk(", irq %d", p->irq);
+ priv->ctr_writable |= 0x10;
+
+ if (p->dma == PARPORT_DMA_AUTO) {
+ p->dma = PARPORT_DMA_NONE;
+ parport_dma_probe(p);
+ }
+ }
+ if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
+ is mandatory (see above) */
+ p->dma = PARPORT_DMA_NONE;
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+ if (parport_ECP_supported(p) &&
+ p->dma != PARPORT_DMA_NOFIFO &&
+ priv->fifo_depth > 0 && p->irq != PARPORT_IRQ_NONE) {
+ p->modes |= PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
+ p->ops->compat_write_data = parport_pc_compat_write_block_pio;
+#ifdef CONFIG_PARPORT_1284
+ p->ops->ecp_write_data = parport_pc_ecp_write_block_pio;
+ /* currently broken, but working on it.. (FB) */
+ /* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
+#endif /* IEEE 1284 support */
+ if (p->dma != PARPORT_DMA_NONE) {
+ printk(", dma %d", p->dma);
+ p->modes |= PARPORT_MODE_DMA;
+ }
+ else printk(", using FIFO");
+ }
+ else
+ /* We can't use the DMA channel after all. */
+ p->dma = PARPORT_DMA_NONE;
+#endif /* Allowed to use FIFO/DMA */
+
+ printk(" [");
+#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+ {
+ int f = 0;
+ printmode(PCSPP);
+ printmode(TRISTATE);
+ printmode(COMPAT)
+ printmode(EPP);
+ printmode(ECP);
+ printmode(DMA);
+ }
+#undef printmode
+#ifndef CONFIG_PARPORT_1284
+ printk ("(,...)");
+#endif /* CONFIG_PARPORT_1284 */
+ printk("]\n");
+ if (probedirq != PARPORT_IRQ_NONE)
+ printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
+
+ /* If No ECP release the ports grabbed above. */
+ if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
+ release_region(base_hi, 3);
+ ECR_res = NULL;
+ }
+ /* Likewise for EEP ports */
+ if (EPP_res && (p->modes & PARPORT_MODE_EPP) == 0) {
+ release_region(base+3, 5);
+ EPP_res = NULL;
+ }
+ if (p->irq != PARPORT_IRQ_NONE) {
+ if (request_irq (p->irq, parport_pc_interrupt,
+ 0, p->name, p)) {
+ printk (KERN_WARNING "%s: irq %d in use, "
+ "resorting to polled operation\n",
+ p->name, p->irq);
+ p->irq = PARPORT_IRQ_NONE;
+ p->dma = PARPORT_DMA_NONE;
+ }
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+ if (p->dma != PARPORT_DMA_NONE) {
+ if (request_dma (p->dma, p->name)) {
+ printk (KERN_WARNING "%s: dma %d in use, "
+ "resorting to PIO operation\n",
+ p->name, p->dma);
+ p->dma = PARPORT_DMA_NONE;
+ } else {
+ priv->dma_buf =
+ pci_alloc_consistent(priv->dev,
+ PAGE_SIZE,
+ &priv->dma_handle);
+ if (! priv->dma_buf) {
+ printk (KERN_WARNING "%s: "
+ "cannot get buffer for DMA, "
+ "resorting to PIO operation\n",
+ p->name);
+ free_dma(p->dma);
+ p->dma = PARPORT_DMA_NONE;
+ }
+ }
+ }
+#endif /* CONFIG_PARPORT_PC_FIFO */
+ }
+
+ /* Done probing. Now put the port into a sensible start-up state. */
+ if (priv->ecr)
+ /*
+ * Put the ECP detected port in PS2 mode.
+ * Do this also for ports that have ECR but don't do ECP.
+ */
+ ECR_WRITE (p, 0x34);
+
+ parport_pc_write_data(p, 0);
+ parport_pc_data_forward (p);
+
+ /* Now that we've told the sharing engine about the port, and
+ found out its characteristics, let the high-level drivers
+ know about it. */
+ spin_lock(&ports_lock);
+ list_add(&priv->list, &ports_list);
+ spin_unlock(&ports_lock);
+ parport_announce_port (p);
+
+ return p;
+
+out5:
+ if (ECR_res)
+ release_region(base_hi, 3);
+ if (EPP_res)
+ release_region(base+0x3, 5);
+ release_region(base, 3);
+out4:
+ parport_put_port(p);
+out3:
+ kfree (priv);
+out2:
+ kfree (ops);
+out1:
+ return NULL;
+}
+
+EXPORT_SYMBOL (parport_pc_probe_port);
+
+void parport_pc_unregister_port (struct parport *p)
+{
+ struct parport_pc_private *priv = p->private_data;
+ struct parport_operations *ops = p->ops;
+
+ parport_remove_port(p);
+ spin_lock(&ports_lock);
+ list_del_init(&priv->list);
+ spin_unlock(&ports_lock);
+ if (p->dma != PARPORT_DMA_NONE)
+ free_dma(p->dma);
+ if (p->irq != PARPORT_IRQ_NONE)
+ free_irq(p->irq, p);
+ release_region(p->base, 3);
+ if (p->size > 3)
+ release_region(p->base + 3, p->size - 3);
+ if (p->modes & PARPORT_MODE_ECP)
+ release_region(p->base_hi, 3);
+#ifdef CONFIG_PARPORT_PC_FIFO
+ if (priv->dma_buf)
+ pci_free_consistent(priv->dev, PAGE_SIZE,
+ priv->dma_buf,
+ priv->dma_handle);
+#endif /* CONFIG_PARPORT_PC_FIFO */
+ kfree (p->private_data);
+ parport_put_port(p);
+ kfree (ops); /* hope no-one cached it */
+}
+
+EXPORT_SYMBOL (parport_pc_unregister_port);
+
+#ifdef CONFIG_PCI
+
+/* ITE support maintained by Rich Liu <richliu@poorman.org> */
+static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+ int autodma, struct parport_pc_via_data *via)
+{
+ short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
+ struct resource *base_res;
+ u32 ite8872set;
+ u32 ite8872_lpt, ite8872_lpthi;
+ u8 ite8872_irq, type;
+ char *fake_name = "parport probe";
+ int irq;
+ int i;
+
+ DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
+
+ // make sure which one chip
+ for(i = 0; i < 5; i++) {
+ base_res = request_region(inta_addr[i], 0x8, fake_name);
+ if (base_res) {
+ int test;
+ pci_write_config_dword (pdev, 0x60,
+ 0xe7000000 | inta_addr[i]);
+ pci_write_config_dword (pdev, 0x78,
+ 0x00000000 | inta_addr[i]);
+ test = inb (inta_addr[i]);
+ if (test != 0xff) break;
+ release_region(inta_addr[i], 0x8);
+ }
+ }
+ if(i >= 5) {
+ printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+ return 0;
+ }
+
+ type = inb (inta_addr[i] + 0x18);
+ type &= 0x0f;
+
+ switch (type) {
+ case 0x2:
+ printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+ ite8872set = 0x64200000;
+ break;
+ case 0xa:
+ printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+ ite8872set = 0x64200000;
+ break;
+ case 0xe:
+ printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+ ite8872set = 0x64e00000;
+ break;
+ case 0x6:
+ printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ return 0;
+ case 0x8:
+ DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+ return 0;
+ default:
+ printk (KERN_INFO "parport_pc: unknown ITE887x\n");
+ printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+ "output to Rich.Liu@ite.com.tw\n");
+ return 0;
+ }
+
+ pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
+ pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+ ite8872_lpt &= 0x0000ff00;
+ pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+ ite8872_lpthi &= 0x0000ff00;
+ pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+ pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+ pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+ // SET SPP&EPP , Parallel Port NO DMA , Enable All Function
+ // SET Parallel IRQ
+ pci_write_config_dword (pdev, 0x9c,
+ ite8872set | (ite8872_irq * 0x11111));
+
+ DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+ DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+ ite8872_lpt);
+ DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+ ite8872_lpthi);
+
+ /* Let the user (or defaults) steer us away from interrupts */
+ irq = ite8872_irq;
+ if (autoirq != PARPORT_IRQ_AUTO)
+ irq = PARPORT_IRQ_NONE;
+
+ /*
+ * Release the resource so that parport_pc_probe_port can get it.
+ */
+ release_resource(base_res);
+ if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+ irq, PARPORT_DMA_NONE, NULL)) {
+ printk (KERN_INFO
+ "parport_pc: ITE 8872 parallel port: io=0x%X",
+ ite8872_lpt);
+ if (irq != PARPORT_IRQ_NONE)
+ printk (", irq=%d", irq);
+ printk ("\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
+ based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
+static int __devinitdata parport_init_mode = 0;
+
+/* Data for two known VIA chips */
+static struct parport_pc_via_data via_686a_data __devinitdata = {
+ 0x51,
+ 0x50,
+ 0x85,
+ 0x02,
+ 0xE2,
+ 0xF0,
+ 0xE6
+};
+static struct parport_pc_via_data via_8231_data __devinitdata = {
+ 0x45,
+ 0x44,
+ 0x50,
+ 0x04,
+ 0xF2,
+ 0xFA,
+ 0xF6
+};
+
+static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+ int autodma, struct parport_pc_via_data *via)
+{
+ u8 tmp, tmp2, siofunc;
+ u8 ppcontrol = 0;
+ int dma, irq;
+ unsigned port1, port2;
+ unsigned have_epp = 0;
+
+ printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
+
+ switch(parport_init_mode)
+ {
+ case 1:
+ printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ break;
+ case 2:
+ printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
+ case 3:
+ printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_EPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ have_epp = 1;
+ break;
+ case 4:
+ printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
+ case 5:
+ printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+ have_epp = 1;
+ break;
+ default:
+ printk(KERN_DEBUG "parport_pc: probing current configuration\n");
+ siofunc = VIA_FUNCTION_PROBE;
+ break;
+ }
+ /*
+ * unlock super i/o configuration
+ */
+ pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+ tmp |= via->via_pci_superio_config_data;
+ pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+ /* Bits 1-0: Parallel Port Mode / Enable */
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ tmp = inb (VIA_CONFIG_DATA);
+ /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ tmp2 = inb (VIA_CONFIG_DATA);
+ if (siofunc == VIA_FUNCTION_PROBE)
+ {
+ siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+ ppcontrol = tmp2;
+ }
+ else
+ {
+ tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+ tmp |= siofunc;
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ outb(tmp, VIA_CONFIG_DATA);
+ tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+ tmp2 |= ppcontrol;
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ outb(tmp2, VIA_CONFIG_DATA);
+ }
+
+ /* Parallel Port I/O Base Address, bits 9-2 */
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ port1 = inb(VIA_CONFIG_DATA) << 2;
+
+ printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
+ if ((port1 == 0x3BC) && have_epp)
+ {
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ outb((0x378 >> 2), VIA_CONFIG_DATA);
+ printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
+ port1 = 0x378;
+ }
+
+ /*
+ * lock super i/o configuration
+ */
+ pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+ tmp &= ~via->via_pci_superio_config_data;
+ pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+ if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
+ printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
+ return 0;
+ }
+
+ /* Bits 7-4: PnP Routing for Parallel Port IRQ */
+ pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
+ irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
+
+ if (siofunc == VIA_FUNCTION_PARPORT_ECP)
+ {
+ /* Bits 3-2: PnP Routing for Parallel Port DMA */
+ pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+ dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+ }
+ else
+ /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
+ dma = PARPORT_DMA_NONE;
+
+ /* Let the user (or defaults) steer us away from interrupts and DMA */
+ if (autoirq == PARPORT_IRQ_NONE) {
+ irq = PARPORT_IRQ_NONE;
+ dma = PARPORT_DMA_NONE;
+ }
+ if (autodma == PARPORT_DMA_NONE)
+ dma = PARPORT_DMA_NONE;
+
+ switch (port1) {
+ case 0x3bc: port2 = 0x7bc; break;
+ case 0x378: port2 = 0x778; break;
+ case 0x278: port2 = 0x678; break;
+ default:
+ printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+ port1);
+ return 0;
+ }
+
+ /* filter bogus IRQs */
+ switch (irq) {
+ case 0:
+ case 2:
+ case 8:
+ case 13:
+ irq = PARPORT_IRQ_NONE;
+ break;
+
+ default: /* do nothing */
+ break;
+ }
+
+ /* finally, do the probe with values obtained */
+ if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
+ printk (KERN_INFO
+ "parport_pc: VIA parallel port: io=0x%X", port1);
+ if (irq != PARPORT_IRQ_NONE)
+ printk (", irq=%d", irq);
+ if (dma != PARPORT_DMA_NONE)
+ printk (", dma=%d", dma);
+ printk ("\n");
+ return 1;
+ }
+
+ printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
+ port1, irq, dma);
+ return 0;
+}
+
+
+enum parport_pc_sio_types {
+ sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
+ sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
+ sio_ite_8872,
+ last_sio
+};
+
+/* each element directly indexed from enum list, above */
+static struct parport_pc_superio {
+ int (*probe) (struct pci_dev *pdev, int autoirq, int autodma, struct parport_pc_via_data *via);
+ struct parport_pc_via_data *via;
+} parport_pc_superio_info[] __devinitdata = {
+ { sio_via_probe, &via_686a_data, },
+ { sio_via_probe, &via_8231_data, },
+ { sio_ite_8872_probe, NULL, },
+};
+
+enum parport_pc_pci_cards {
+ siig_1p_10x = last_sio,
+ siig_2p_10x,
+ siig_1p_20x,
+ siig_2p_20x,
+ lava_parallel,
+ lava_parallel_dual_a,
+ lava_parallel_dual_b,
+ boca_ioppar,
+ plx_9050,
+ timedia_4078a,
+ timedia_4079h,
+ timedia_4085h,
+ timedia_4088a,
+ timedia_4089a,
+ timedia_4095a,
+ timedia_4096a,
+ timedia_4078u,
+ timedia_4079a,
+ timedia_4085u,
+ timedia_4079r,
+ timedia_4079s,
+ timedia_4079d,
+ timedia_4079e,
+ timedia_4079f,
+ timedia_9079a,
+ timedia_9079b,
+ timedia_9079c,
+ timedia_4006a,
+ timedia_4014,
+ timedia_4008a,
+ timedia_4018,
+ timedia_9018a,
+ syba_2p_epp,
+ syba_1p_ecp,
+ titan_010l,
+ titan_1284p2,
+ avlab_1p,
+ avlab_2p,
+ oxsemi_954,
+ oxsemi_840,
+ aks_0100,
+ mobility_pp,
+ netmos_9705,
+ netmos_9715,
+ netmos_9755,
+ netmos_9805,
+ netmos_9815,
+ netmos_9855,
+};
+
+
+/* each element directly indexed from enum list, above
+ * (but offset by last_sio) */
+static struct parport_pc_pci {
+ int numports;
+ struct { /* BAR (base address registers) numbers in the config
+ space header */
+ int lo;
+ int hi; /* -1 if not there, >6 for offset-method (max
+ BAR is 6) */
+ } addr[4];
+
+ /* If set, this is called immediately after pci_enable_device.
+ * If it returns non-zero, no probing will take place and the
+ * ports will not be used. */
+ int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
+
+ /* If set, this is called after probing for ports. If 'failed'
+ * is non-zero we couldn't use any of the ports. */
+ void (*postinit_hook) (struct pci_dev *pdev, int failed);
+} cards[] __devinitdata = {
+ /* siig_1p_10x */ { 1, { { 2, 3 }, } },
+ /* siig_2p_10x */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* siig_1p_20x */ { 1, { { 0, 1 }, } },
+ /* siig_2p_20x */ { 2, { { 0, 1 }, { 2, 3 }, } },
+ /* lava_parallel */ { 1, { { 0, -1 }, } },
+ /* lava_parallel_dual_a */ { 1, { { 0, -1 }, } },
+ /* lava_parallel_dual_b */ { 1, { { 0, -1 }, } },
+ /* boca_ioppar */ { 1, { { 0, -1 }, } },
+ /* plx_9050 */ { 2, { { 4, -1 }, { 5, -1 }, } },
+ /* timedia_4078a */ { 1, { { 2, -1 }, } },
+ /* timedia_4079h */ { 1, { { 2, 3 }, } },
+ /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
+ /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4078u */ { 1, { { 2, -1 }, } },
+ /* timedia_4079a */ { 1, { { 2, 3 }, } },
+ /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
+ /* timedia_4079r */ { 1, { { 2, 3 }, } },
+ /* timedia_4079s */ { 1, { { 2, 3 }, } },
+ /* timedia_4079d */ { 1, { { 2, 3 }, } },
+ /* timedia_4079e */ { 1, { { 2, 3 }, } },
+ /* timedia_4079f */ { 1, { { 2, 3 }, } },
+ /* timedia_9079a */ { 1, { { 2, 3 }, } },
+ /* timedia_9079b */ { 1, { { 2, 3 }, } },
+ /* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* timedia_4006a */ { 1, { { 0, -1 }, } },
+ /* timedia_4014 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* timedia_4008a */ { 1, { { 0, 1 }, } },
+ /* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } },
+ /* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } },
+ /* SYBA uses fixed offsets in
+ a 1K io window */
+ /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
+ /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
+ /* titan_010l */ { 1, { { 3, -1 }, } },
+ /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
+ /* avlab_1p */ { 1, { { 0, 1}, } },
+ /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
+ /* The Oxford Semi cards are unusual: 954 doesn't support ECP,
+ * and 840 locks up if you write 1 to bit 2! */
+ /* oxsemi_954 */ { 1, { { 0, -1 }, } },
+ /* oxsemi_840 */ { 1, { { 0, -1 }, } },
+ /* aks_0100 */ { 1, { { 0, -1 }, } },
+ /* mobility_pp */ { 1, { { 0, 1 }, } },
+ /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */
+ /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
+ /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
+ /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
+ /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+ /* netmos_9855 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+};
+
+static struct pci_device_id parport_pc_pci_tbl[] = {
+ /* Super-IO onboard chips */
+ { 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
+ { 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
+ { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
+
+ /* PCI cards */
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_a },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_b },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+ /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
+ { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
+ { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
+ { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
+ { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
+ { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
+ { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
+ { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
+ { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
+ { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
+ { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
+ { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
+ { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
+ { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
+ { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
+ { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
+ { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
+ { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
+ { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
+ { 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a },
+ { 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 },
+ { 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
+ { 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 },
+ { 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a },
+ { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
+ { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp },
+ { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
+ { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
+ /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
+ { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+ { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954PP,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
+ { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
+ /* NetMos communication controllers */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9715 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9755,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9755 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
+ { 0, } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+
+struct pci_parport_data {
+ int num;
+ struct parport *ports[2];
+};
+
+static int parport_pc_pci_probe (struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int err, count, n, i = id->driver_data;
+ struct pci_parport_data *data;
+
+ if (i < last_sio)
+ /* This is an onboard Super-IO and has already been probed */
+ return 0;
+
+ /* This is a PCI card */
+ i -= last_sio;
+ count = 0;
+ if ((err = pci_enable_device (dev)) != 0)
+ return err;
+
+ data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (cards[i].preinit_hook &&
+ cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+ kfree(data);
+ return -ENODEV;
+ }
+
+ for (n = 0; n < cards[i].numports; n++) {
+ int lo = cards[i].addr[n].lo;
+ int hi = cards[i].addr[n].hi;
+ unsigned long io_lo, io_hi;
+ io_lo = pci_resource_start (dev, lo);
+ io_hi = 0;
+ if ((hi >= 0) && (hi <= 6))
+ io_hi = pci_resource_start (dev, hi);
+ else if (hi > 6)
+ io_lo += hi; /* Reinterpret the meaning of
+ "hi" as an offset (see SYBA
+ def.) */
+ /* TODO: test if sharing interrupts works */
+ printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
+ "I/O at %#lx(%#lx)\n",
+ parport_pc_pci_tbl[i + last_sio].vendor,
+ parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi);
+ data->ports[count] =
+ parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
+ PARPORT_DMA_NONE, dev);
+ if (data->ports[count])
+ count++;
+ }
+
+ data->num = count;
+
+ if (cards[i].postinit_hook)
+ cards[i].postinit_hook (dev, count == 0);
+
+ if (count) {
+ pci_set_drvdata(dev, data);
+ return 0;
+ }
+
+ kfree(data);
+
+ return -ENODEV;
+}
+
+static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
+{
+ struct pci_parport_data *data = pci_get_drvdata(dev);
+ int i;
+
+ pci_set_drvdata(dev, NULL);
+
+ if (data) {
+ for (i = data->num - 1; i >= 0; i--)
+ parport_pc_unregister_port(data->ports[i]);
+
+ kfree(data);
+ }
+}
+
+static struct pci_driver parport_pc_pci_driver = {
+ .name = "parport_pc",
+ .id_table = parport_pc_pci_tbl,
+ .probe = parport_pc_pci_probe,
+ .remove = __devexit_p(parport_pc_pci_remove),
+};
+
+static int __init parport_pc_init_superio (int autoirq, int autodma)
+{
+ const struct pci_device_id *id;
+ struct pci_dev *pdev = NULL;
+ int ret = 0;
+
+ while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
+ id = pci_match_device (parport_pc_pci_tbl, pdev);
+ if (id == NULL || id->driver_data >= last_sio)
+ continue;
+
+ if (parport_pc_superio_info[id->driver_data].probe
+ (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+ ret++;
+ }
+ }
+
+ return ret; /* number of devices found */
+}
+#else
+static struct pci_driver parport_pc_pci_driver;
+static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+#endif /* CONFIG_PCI */
+
+
+static const struct pnp_device_id parport_pc_pnp_tbl[] = {
+ /* Standard LPT Printer Port */
+ {.id = "PNP0400", .driver_data = 0},
+ /* ECP Printer Port */
+ {.id = "PNP0401", .driver_data = 0},
+ { }
+};
+
+MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+
+static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+{
+ struct parport *pdata;
+ unsigned long io_lo, io_hi;
+ int dma, irq;
+
+ if (pnp_port_valid(dev,0) &&
+ !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
+ io_lo = pnp_port_start(dev,0);
+ } else
+ return -EINVAL;
+
+ if (pnp_port_valid(dev,1) &&
+ !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
+ io_hi = pnp_port_start(dev,1);
+ } else
+ io_hi = 0;
+
+ if (pnp_irq_valid(dev,0) &&
+ !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
+ irq = pnp_irq(dev,0);
+ } else
+ irq = PARPORT_IRQ_NONE;
+
+ if (pnp_dma_valid(dev,0) &&
+ !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
+ dma = pnp_dma(dev,0);
+ } else
+ dma = PARPORT_DMA_NONE;
+
+ printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
+ if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
+ return -ENODEV;
+
+ pnp_set_drvdata(dev,pdata);
+ return 0;
+}
+
+static void parport_pc_pnp_remove(struct pnp_dev *dev)
+{
+ struct parport *pdata = (struct parport *)pnp_get_drvdata(dev);
+ if (!pdata)
+ return;
+
+ parport_pc_unregister_port(pdata);
+}
+
+/* we only need the pnp layer to activate the device, at least for now */
+static struct pnp_driver parport_pc_pnp_driver = {
+ .name = "parport_pc",
+ .id_table = parport_pc_pnp_tbl,
+ .probe = parport_pc_pnp_probe,
+ .remove = parport_pc_pnp_remove,
+};
+
+
+/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
+static int __devinit __attribute__((unused))
+parport_pc_find_isa_ports (int autoirq, int autodma)
+{
+ int count = 0;
+
+ if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
+ count++;
+ if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
+ count++;
+ if (parport_pc_probe_port(0x278, 0x678, autoirq, autodma, NULL))
+ count++;
+
+ return count;
+}
+
+/* This function is called by parport_pc_init if the user didn't
+ * specify any ports to probe. Its job is to find some ports. Order
+ * is important here -- we want ISA ports to be registered first,
+ * followed by PCI cards (for least surprise), but before that we want
+ * to do chipset-specific tests for some onboard ports that we know
+ * about.
+ *
+ * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
+ * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
+ */
+static int __init parport_pc_find_ports (int autoirq, int autodma)
+{
+ int count = 0, r;
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+ detect_and_report_winbond ();
+ detect_and_report_smsc ();
+#endif
+
+ /* Onboard SuperIO chipsets that show themselves on the PCI bus. */
+ count += parport_pc_init_superio (autoirq, autodma);
+
+ /* PnP ports, skip detection if SuperIO already found them */
+ if (!count) {
+ r = pnp_register_driver (&parport_pc_pnp_driver);
+ if (r >= 0) {
+ pnp_registered_parport = 1;
+ count += r;
+ }
+ }
+
+ /* ISA ports and whatever (see asm/parport.h). */
+ count += parport_pc_find_nonpci_ports (autoirq, autodma);
+
+ r = pci_register_driver (&parport_pc_pci_driver);
+ if (r)
+ return r;
+ pci_registered_parport = 1;
+ count += 1;
+
+ return count;
+}
+
+/*
+ * Piles of crap below pretend to be a parser for module and kernel
+ * parameters. Say "thank you" to whoever had come up with that
+ * syntax and keep in mind that code below is a cleaned up version.
+ */
+
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
+ { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+
+static int __init parport_parse_param(const char *s, int *val,
+ int automatic, int none, int nofifo)
+{
+ if (!s)
+ return 0;
+ if (!strncmp(s, "auto", 4))
+ *val = automatic;
+ else if (!strncmp(s, "none", 4))
+ *val = none;
+ else if (nofifo && !strncmp(s, "nofifo", 4))
+ *val = nofifo;
+ else {
+ char *ep;
+ unsigned long r = simple_strtoul(s, &ep, 0);
+ if (ep != s)
+ *val = r;
+ else {
+ printk(KERN_ERR "parport: bad specifier `%s'\n", s);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int __init parport_parse_irq(const char *irqstr, int *val)
+{
+ return parport_parse_param(irqstr, val, PARPORT_IRQ_AUTO,
+ PARPORT_IRQ_NONE, 0);
+}
+
+static int __init parport_parse_dma(const char *dmastr, int *val)
+{
+ return parport_parse_param(dmastr, val, PARPORT_DMA_AUTO,
+ PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO);
+}
+
+#ifdef CONFIG_PCI
+static int __init parport_init_mode_setup(char *str)
+{
+ printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+ if (!strcmp (str, "spp"))
+ parport_init_mode=1;
+ if (!strcmp (str, "ps2"))
+ parport_init_mode=2;
+ if (!strcmp (str, "epp"))
+ parport_init_mode=3;
+ if (!strcmp (str, "ecp"))
+ parport_init_mode=4;
+ if (!strcmp (str, "ecpepp"))
+ parport_init_mode=5;
+ return 1;
+}
+#endif
+
+#ifdef MODULE
+static const char *irq[PARPORT_PC_MAX_PORTS];
+static const char *dma[PARPORT_PC_MAX_PORTS];
+
+MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
+module_param_array(io_hi, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ line");
+module_param_array(irq, charp, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channel");
+module_param_array(dma, charp, NULL, 0);
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+ (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
+module_param(verbose_probing, int, 0644);
+#endif
+#ifdef CONFIG_PCI
+static char *init_mode;
+MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+module_param(init_mode, charp, 0);
+#endif
+
+static int __init parse_parport_params(void)
+{
+ unsigned int i;
+ int val;
+
+#ifdef CONFIG_PCI
+ if (init_mode)
+ parport_init_mode_setup(init_mode);
+#endif
+
+ for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) {
+ if (parport_parse_irq(irq[i], &val))
+ return 1;
+ irqval[i] = val;
+ if (parport_parse_dma(dma[i], &val))
+ return 1;
+ dmaval[i] = val;
+ }
+ if (!io[0]) {
+ /* The user can make us use any IRQs or DMAs we find. */
+ if (irq[0] && !parport_parse_irq(irq[0], &val))
+ switch (val) {
+ case PARPORT_IRQ_NONE:
+ case PARPORT_IRQ_AUTO:
+ irqval[0] = val;
+ break;
+ default:
+ printk (KERN_WARNING
+ "parport_pc: irq specified "
+ "without base address. Use 'io=' "
+ "to specify one\n");
+ }
+
+ if (dma[0] && !parport_parse_dma(dma[0], &val))
+ switch (val) {
+ case PARPORT_DMA_NONE:
+ case PARPORT_DMA_AUTO:
+ dmaval[0] = val;
+ break;
+ default:
+ printk (KERN_WARNING
+ "parport_pc: dma specified "
+ "without base address. Use 'io=' "
+ "to specify one\n");
+ }
+ }
+ return 0;
+}
+
+#else
+
+static int parport_setup_ptr __initdata = 0;
+
+/*
+ * Acceptable parameters:
+ *
+ * parport=0
+ * parport=auto
+ * parport=0xBASE[,IRQ[,DMA]]
+ *
+ * IRQ/DMA may be numeric or 'auto' or 'none'
+ */
+static int __init parport_setup (char *str)
+{
+ char *endptr;
+ char *sep;
+ int val;
+
+ if (!str || !*str || (*str == '0' && !*(str+1))) {
+ /* Disable parport if "parport=0" in cmdline */
+ io[0] = PARPORT_DISABLE;
+ return 1;
+ }
+
+ if (!strncmp (str, "auto", 4)) {
+ irqval[0] = PARPORT_IRQ_AUTO;
+ dmaval[0] = PARPORT_DMA_AUTO;
+ return 1;
+ }
+
+ val = simple_strtoul (str, &endptr, 0);
+ if (endptr == str) {
+ printk (KERN_WARNING "parport=%s not understood\n", str);
+ return 1;
+ }
+
+ if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
+ printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
+ return 1;
+ }
+
+ io[parport_setup_ptr] = val;
+ irqval[parport_setup_ptr] = PARPORT_IRQ_NONE;
+ dmaval[parport_setup_ptr] = PARPORT_DMA_NONE;
+
+ sep = strchr(str, ',');
+ if (sep++) {
+ if (parport_parse_irq(sep, &val))
+ return 1;
+ irqval[parport_setup_ptr] = val;
+ sep = strchr(sep, ',');
+ if (sep++) {
+ if (parport_parse_dma(sep, &val))
+ return 1;
+ dmaval[parport_setup_ptr] = val;
+ }
+ }
+ parport_setup_ptr++;
+ return 1;
+}
+
+static int __init parse_parport_params(void)
+{
+ return io[0] == PARPORT_DISABLE;
+}
+
+__setup ("parport=", parport_setup);
+
+/*
+ * Acceptable parameters:
+ *
+ * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
+ */
+#ifdef CONFIG_PCI
+__setup("parport_init_mode=",parport_init_mode_setup);
+#endif
+#endif
+
+/* "Parser" ends here */
+
+static int __init parport_pc_init(void)
+{
+ int count = 0;
+
+ if (parse_parport_params())
+ return -EINVAL;
+
+ if (io[0]) {
+ int i;
+ /* Only probe the ports we were given. */
+ user_specified = 1;
+ for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
+ if (!io[i])
+ break;
+ if ((io_hi[i]) == PARPORT_IOHI_AUTO)
+ io_hi[i] = 0x400 + io[i];
+ if (parport_pc_probe_port(io[i], io_hi[i],
+ irqval[i], dmaval[i], NULL))
+ count++;
+ }
+ } else
+ count += parport_pc_find_ports (irqval[0], dmaval[0]);
+
+ return 0;
+}
+
+static void __exit parport_pc_exit(void)
+{
+ if (pci_registered_parport)
+ pci_unregister_driver (&parport_pc_pci_driver);
+ if (pnp_registered_parport)
+ pnp_unregister_driver (&parport_pc_pnp_driver);
+
+ spin_lock(&ports_lock);
+ while (!list_empty(&ports_list)) {
+ struct parport_pc_private *priv;
+ struct parport *port;
+ priv = list_entry(ports_list.next,
+ struct parport_pc_private, list);
+ port = priv->port;
+ spin_unlock(&ports_lock);
+ parport_pc_unregister_port(port);
+ spin_lock(&ports_lock);
+ }
+ spin_unlock(&ports_lock);
+}
+
+MODULE_AUTHOR("Phil Blundell, Tim Waugh, others");
+MODULE_DESCRIPTION("PC-style parallel port driver");
+MODULE_LICENSE("GPL");
+module_init(parport_pc_init)
+module_exit(parport_pc_exit)