summaryrefslogtreecommitdiff
path: root/drivers/power
diff options
context:
space:
mode:
authorArun Murthy <arun.murthy@stericsson.com>2012-02-29 21:54:26 +0530
committerAnton Vorontsov <anton.vorontsov@linaro.org>2012-03-26 20:41:04 +0400
commit84edbeeab67c1575067335179513150115da367b (patch)
tree58730cc0d097cdb8c5970973437289f9868cfc53 /drivers/power
parent1668f81159fb72eda2114a9c73a64ffee045cb01 (diff)
ab8500-charger: AB8500 charger driver
This driver is responsible for detecting the ac/usb plugin and also includes function to enable ac/usb charging and re-kick the watchdog. It registers with the power supply class and provides information to the user space. The information include status of ac/usb charger device. This information in turn will be used by the abx500 charging algorithm driver to enable/disable and monitor charging. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/ab8500_charger.c2789
1 files changed, 2789 insertions, 0 deletions
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
new file mode 100644
index 000000000000..bbc541a59a38
--- /dev/null
+++ b/drivers/power/ab8500_charger.c
@@ -0,0 +1,2789 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Charger driver for AB8500
+ *
+ * License Terms: GNU General Public License v2
+ * Author:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/usb/otg.h>
+
+/* Charger constants */
+#define NO_PW_CONN 0
+#define AC_PW_CONN 1
+#define USB_PW_CONN 2
+
+#define MAIN_WDOG_ENA 0x01
+#define MAIN_WDOG_KICK 0x02
+#define MAIN_WDOG_DIS 0x00
+#define CHARG_WD_KICK 0x01
+#define MAIN_CH_ENA 0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
+#define USB_CH_ENA 0x01
+#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02
+#define MAIN_CH_DET 0x01
+#define MAIN_CH_CV_ON 0x04
+#define USB_CH_CV_ON 0x08
+#define VBUS_DET_DBNC100 0x02
+#define VBUS_DET_DBNC1 0x01
+#define OTP_ENABLE_WD 0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT 4
+#define VBUS_IN_CURR_LIM_SHIFT 4
+
+#define LED_INDICATOR_PWM_ENA 0x01
+#define LED_INDICATOR_PWM_DIS 0x00
+#define LED_IND_CUR_5MA 0x04
+#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT 0x02
+#define VBUS_CH_NOK 0x08
+#define USB_CH_TH_PROT 0x02
+#define VBUS_OVV_TH 0x01
+#define MAIN_CH_NOK 0x01
+#define VBUS_DET 0x80
+
+/* UsbLineStatus register bit masks */
+#define AB8500_USB_LINK_STATUS 0x78
+#define AB8500_STD_HOST_SUSP 0x18
+
+/* Watchdog timeout constant */
+#define WD_TIMER 0x30 /* 4min */
+#define WD_KICK_INTERVAL (60 * HZ)
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG 0x4E
+
+/* UsbLineStatus register - usb types */
+enum ab8500_charger_link_status {
+ USB_STAT_NOT_CONFIGURED,
+ USB_STAT_STD_HOST_NC,
+ USB_STAT_STD_HOST_C_NS,
+ USB_STAT_STD_HOST_C_S,
+ USB_STAT_HOST_CHG_NM,
+ USB_STAT_HOST_CHG_HS,
+ USB_STAT_HOST_CHG_HS_CHIRP,
+ USB_STAT_DEDICATED_CHG,
+ USB_STAT_ACA_RID_A,
+ USB_STAT_ACA_RID_B,
+ USB_STAT_ACA_RID_C_NM,
+ USB_STAT_ACA_RID_C_HS,
+ USB_STAT_ACA_RID_C_HS_CHIRP,
+ USB_STAT_HM_IDGND,
+ USB_STAT_RESERVED,
+ USB_STAT_NOT_VALID_LINK,
+};
+
+enum ab8500_usb_state {
+ AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */
+ AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */
+ AB8500_BM_USB_STATE_CONFIGURED,
+ AB8500_BM_USB_STATE_SUSPEND,
+ AB8500_BM_USB_STATE_RESUME,
+ AB8500_BM_USB_STATE_MAX,
+};
+
+/* VBUS input current limits supported in AB8500 in mA */
+#define USB_CH_IP_CUR_LVL_0P05 50
+#define USB_CH_IP_CUR_LVL_0P09 98
+#define USB_CH_IP_CUR_LVL_0P19 193
+#define USB_CH_IP_CUR_LVL_0P29 290
+#define USB_CH_IP_CUR_LVL_0P38 380
+#define USB_CH_IP_CUR_LVL_0P45 450
+#define USB_CH_IP_CUR_LVL_0P5 500
+#define USB_CH_IP_CUR_LVL_0P6 600
+#define USB_CH_IP_CUR_LVL_0P7 700
+#define USB_CH_IP_CUR_LVL_0P8 800
+#define USB_CH_IP_CUR_LVL_0P9 900
+#define USB_CH_IP_CUR_LVL_1P0 1000
+#define USB_CH_IP_CUR_LVL_1P1 1100
+#define USB_CH_IP_CUR_LVL_1P3 1300
+#define USB_CH_IP_CUR_LVL_1P4 1400
+#define USB_CH_IP_CUR_LVL_1P5 1500
+
+#define VBAT_TRESH_IP_CUR_RED 3800
+
+#define to_ab8500_charger_usb_device_info(x) container_of((x), \
+ struct ab8500_charger, usb_chg)
+#define to_ab8500_charger_ac_device_info(x) container_of((x), \
+ struct ab8500_charger, ac_chg)
+
+/**
+ * struct ab8500_charger_interrupts - ab8500 interupts
+ * @name: name of the interrupt
+ * @isr function pointer to the isr
+ */
+struct ab8500_charger_interrupts {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_charger_info {
+ int charger_connected;
+ int charger_online;
+ int charger_voltage;
+ int cv_active;
+ bool wd_expired;
+};
+
+struct ab8500_charger_event_flags {
+ bool mainextchnotok;
+ bool main_thermal_prot;
+ bool usb_thermal_prot;
+ bool vbus_ovv;
+ bool usbchargernotok;
+ bool chgwdexp;
+ bool vbus_collapse;
+};
+
+struct ab8500_charger_usb_state {
+ bool usb_changed;
+ int usb_current;
+ enum ab8500_usb_state state;
+ spinlock_t usb_lock;
+};
+
+/**
+ * struct ab8500_charger - ab8500 Charger device information
+ * @dev: Pointer to the structure device
+ * @max_usb_in_curr: Max USB charger input current
+ * @vbus_detected: VBUS detected
+ * @vbus_detected_start:
+ * VBUS detected during startup
+ * @ac_conn: This will be true when the AC charger has been plugged
+ * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC
+ * charger is enabled
+ * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB
+ * charger is enabled
+ * @vbat Battery voltage
+ * @old_vbat Previously measured battery voltage
+ * @autopower Indicate if we should have automatic pwron after pwrloss
+ * @parent: Pointer to the struct ab8500
+ * @gpadc: Pointer to the struct gpadc
+ * @pdata: Pointer to the abx500_charger platform data
+ * @bat: Pointer to the abx500_bm platform data
+ * @flags: Structure for information about events triggered
+ * @usb_state: Structure for usb stack information
+ * @ac_chg: AC charger power supply
+ * @usb_chg: USB charger power supply
+ * @ac: Structure that holds the AC charger properties
+ * @usb: Structure that holds the USB charger properties
+ * @regu: Pointer to the struct regulator
+ * @charger_wq: Work queue for the IRQs and checking HW state
+ * @check_vbat_work Work for checking vbat threshold to adjust vbus current
+ * @check_hw_failure_work: Work for checking HW state
+ * @check_usbchgnotok_work: Work for checking USB charger not ok status
+ * @kick_wd_work: Work for kicking the charger watchdog in case
+ * of ABB rev 1.* due to the watchog logic bug
+ * @ac_work: Work for checking AC charger connection
+ * @detect_usb_type_work: Work for detecting the USB type connected
+ * @usb_link_status_work: Work for checking the new USB link status
+ * @usb_state_changed_work: Work for checking USB state
+ * @check_main_thermal_prot_work:
+ * Work for checking Main thermal status
+ * @check_usb_thermal_prot_work:
+ * Work for checking USB thermal status
+ */
+struct ab8500_charger {
+ struct device *dev;
+ int max_usb_in_curr;
+ bool vbus_detected;
+ bool vbus_detected_start;
+ bool ac_conn;
+ bool vddadc_en_ac;
+ bool vddadc_en_usb;
+ int vbat;
+ int old_vbat;
+ bool autopower;
+ struct ab8500 *parent;
+ struct ab8500_gpadc *gpadc;
+ struct abx500_charger_platform_data *pdata;
+ struct abx500_bm_data *bat;
+ struct ab8500_charger_event_flags flags;
+ struct ab8500_charger_usb_state usb_state;
+ struct ux500_charger ac_chg;
+ struct ux500_charger usb_chg;
+ struct ab8500_charger_info ac;
+ struct ab8500_charger_info usb;
+ struct regulator *regu;
+ struct workqueue_struct *charger_wq;
+ struct delayed_work check_vbat_work;
+ struct delayed_work check_hw_failure_work;
+ struct delayed_work check_usbchgnotok_work;
+ struct delayed_work kick_wd_work;
+ struct work_struct ac_work;
+ struct work_struct detect_usb_type_work;
+ struct work_struct usb_link_status_work;
+ struct work_struct usb_state_changed_work;
+ struct work_struct check_main_thermal_prot_work;
+ struct work_struct check_usb_thermal_prot_work;
+ struct otg_transceiver *otg;
+ struct notifier_block nb;
+};
+
+/* AC properties */
+static enum power_supply_property ab8500_charger_ac_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/* USB properties */
+static enum power_supply_property ab8500_charger_usb_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/**
+ * ab8500_power_loss_handling - set how we handle powerloss.
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Magic nummbers are from STE HW department.
+ */
+static void ab8500_power_loss_handling(struct ab8500_charger *di)
+{
+ u8 reg;
+ int ret;
+
+ dev_dbg(di->dev, "Autopower : %d\n", di->autopower);
+
+ /* read the autopower register */
+ ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ return;
+ }
+
+ /* enable the OPT emulation registers */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ return;
+ }
+
+ if (di->autopower)
+ reg |= 0x8;
+ else
+ reg &= ~0x8;
+
+ /* write back the changed value to autopower reg */
+ ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ return;
+ }
+
+ /* disable the set OTP registers again */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ return;
+ }
+}
+
+/**
+ * ab8500_power_supply_changed - a wrapper with local extentions for
+ * power_supply_changed
+ * @di: pointer to the ab8500_charger structure
+ * @psy: pointer to power_supply_that have changed.
+ *
+ */
+static void ab8500_power_supply_changed(struct ab8500_charger *di,
+ struct power_supply *psy)
+{
+ if (di->pdata->autopower_cfg) {
+ if (!di->usb.charger_connected &&
+ !di->ac.charger_connected &&
+ di->autopower) {
+ di->autopower = false;
+ ab8500_power_loss_handling(di);
+ } else if (!di->autopower &&
+ (di->ac.charger_connected ||
+ di->usb.charger_connected)) {
+ di->autopower = true;
+ ab8500_power_loss_handling(di);
+ }
+ }
+ power_supply_changed(psy);
+}
+
+static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
+ bool connected)
+{
+ if (connected != di->usb.charger_connected) {
+ dev_dbg(di->dev, "USB connected:%i\n", connected);
+ di->usb.charger_connected = connected;
+ sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
+ }
+}
+
+/**
+ * ab8500_charger_get_ac_voltage() - get ac charger voltage
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger voltage (on success)
+ */
+static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
+{
+ int vch;
+
+ /* Only measure voltage if the charger is connected */
+ if (di->ac.charger_connected) {
+ vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
+ if (vch < 0)
+ dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
+ } else {
+ vch = 0;
+ }
+ return vch;
+}
+
+/**
+ * ab8500_charger_ac_cv() - check if the main charger is in CV mode
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_ac_cv(struct ab8500_charger *di)
+{
+ u8 val;
+ int ret = 0;
+
+ /* Only check CV mode if the charger is online */
+ if (di->ac.charger_online) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_STATUS1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return 0;
+ }
+
+ if (val & MAIN_CH_CV_ON)
+ ret = 1;
+ else
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_get_vbus_voltage() - get vbus voltage
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the vbus voltage.
+ * Returns vbus voltage (on success)
+ */
+static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
+{
+ int vch;
+
+ /* Only measure voltage if the charger is connected */
+ if (di->usb.charger_connected) {
+ vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
+ if (vch < 0)
+ dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+ } else {
+ vch = 0;
+ }
+ return vch;
+}
+
+/**
+ * ab8500_charger_get_usb_current() - get usb charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the usb charger current.
+ * Returns usb current (on success) and error code on failure
+ */
+static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
+{
+ int ich;
+
+ /* Only measure current if the charger is online */
+ if (di->usb.charger_online) {
+ ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
+ if (ich < 0)
+ dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+ } else {
+ ich = 0;
+ }
+ return ich;
+}
+
+/**
+ * ab8500_charger_get_ac_current() - get ac charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the ac charger current.
+ * Returns ac current (on success) and error code on failure.
+ */
+static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
+{
+ int ich;
+
+ /* Only measure current if the charger is online */
+ if (di->ac.charger_online) {
+ ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
+ if (ich < 0)
+ dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+ } else {
+ ich = 0;
+ }
+ return ich;
+}
+
+/**
+ * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_usb_cv(struct ab8500_charger *di)
+{
+ int ret;
+ u8 val;
+
+ /* Only check CV mode if the charger is online */
+ if (di->usb.charger_online) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return 0;
+ }
+
+ if (val & USB_CH_CV_ON)
+ ret = 1;
+ else
+ ret = 0;
+ } else {
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_detect_chargers() - Detect the connected chargers
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns the type of charger connected.
+ * For USB it will not mean we can actually charge from it
+ * but that there is a USB cable connected that we have to
+ * identify. This is used during startup when we don't get
+ * interrupts of the charger detection
+ *
+ * Returns an integer value, that means,
+ * NO_PW_CONN no power supply is connected
+ * AC_PW_CONN if the AC power supply is connected
+ * USB_PW_CONN if the USB power supply is connected
+ * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
+ */
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
+{
+ int result = NO_PW_CONN;
+ int ret;
+ u8 val;
+
+ /* Check for AC charger */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_STATUS1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ if (val & MAIN_CH_DET)
+ result = AC_PW_CONN;
+
+ /* Check for USB charger */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
+ result |= USB_PW_CONN;
+
+ return result;
+}
+
+/**
+ * ab8500_charger_max_usb_curr() - get the max curr for the USB type
+ * @di: pointer to the ab8500_charger structure
+ * @link_status: the identified USB type
+ *
+ * Get the maximum current that is allowed to be drawn from the host
+ * based on the USB type.
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
+ enum ab8500_charger_link_status link_status)
+{
+ int ret = 0;
+
+ switch (link_status) {
+ case USB_STAT_STD_HOST_NC:
+ case USB_STAT_STD_HOST_C_NS:
+ case USB_STAT_STD_HOST_C_S:
+ dev_dbg(di->dev, "USB Type - Standard host is "
+ "detected through USB driver\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+ break;
+ case USB_STAT_HOST_CHG_HS_CHIRP:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ break;
+ case USB_STAT_HOST_CHG_HS:
+ case USB_STAT_ACA_RID_C_HS:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
+ break;
+ case USB_STAT_ACA_RID_A:
+ /*
+ * Dedicated charger level minus maximum current accessory
+ * can consume (300mA). Closest level is 1100mA
+ */
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1;
+ break;
+ case USB_STAT_ACA_RID_B:
+ /*
+ * Dedicated charger level minus 120mA (20mA for ACA and
+ * 100mA for potential accessory). Closest level is 1300mA
+ */
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+ break;
+ case USB_STAT_DEDICATED_CHG:
+ case USB_STAT_HOST_CHG_NM:
+ case USB_STAT_ACA_RID_C_HS_CHIRP:
+ case USB_STAT_ACA_RID_C_NM:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ break;
+ case USB_STAT_RESERVED:
+ /*
+ * This state is used to indicate that VBUS has dropped below
+ * the detection level 4 times in a row. This is due to the
+ * charger output current is set to high making the charger
+ * voltage collapse. This have to be propagated through to
+ * chargalg. This is done using the property
+ * POWER_SUPPLY_PROP_CURRENT_AVG = 1
+ */
+ di->flags.vbus_collapse = true;
+ dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED "
+ "VBUS has collapsed\n");
+ ret = -1;
+ break;
+ case USB_STAT_HM_IDGND:
+ case USB_STAT_NOT_CONFIGURED:
+ case USB_STAT_NOT_VALID_LINK:
+ dev_err(di->dev, "USB Type - Charging not allowed\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ ret = -ENXIO;
+ break;
+ default:
+ dev_err(di->dev, "USB Type - Unknown\n");
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ ret = -ENXIO;
+ break;
+ };
+
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+ link_status, di->max_usb_in_curr);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_read_usb_type() - read the type of usb connected
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
+{
+ int ret;
+ u8 val;
+
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ /* get the USB type */
+ val = (val & AB8500_USB_LINK_STATUS) >> 3;
+ ret = ab8500_charger_max_usb_curr(di,
+ (enum ab8500_charger_link_status) val);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_detect_usb_type() - get the type of usb connected
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
+{
+ int i, ret;
+ u8 val;
+
+ /*
+ * On getting the VBUS rising edge detect interrupt there
+ * is a 250ms delay after which the register UsbLineStatus
+ * is filled with valid data.
+ */
+ for (i = 0; i < 10; i++) {
+ msleep(250);
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
+ &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ /*
+ * Until the IT source register is read the UsbLineStatus
+ * register is not updated, hence doing the same
+ * Revisit this:
+ */
+
+ /* get the USB type */
+ val = (val & AB8500_USB_LINK_STATUS) >> 3;
+ if (val)
+ break;
+ }
+ ret = ab8500_charger_max_usb_curr(di,
+ (enum ab8500_charger_link_status) val);
+
+ return ret;
+}
+
+/*
+ * This array maps the raw hex value to charger voltage used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_voltage_map[] = {
+ 3500 ,
+ 3525 ,
+ 3550 ,
+ 3575 ,
+ 3600 ,
+ 3625 ,
+ 3650 ,
+ 3675 ,
+ 3700 ,
+ 3725 ,
+ 3750 ,
+ 3775 ,
+ 3800 ,
+ 3825 ,
+ 3850 ,
+ 3875 ,
+ 3900 ,
+ 3925 ,
+ 3950 ,
+ 3975 ,
+ 4000 ,
+ 4025 ,
+ 4050 ,
+ 4060 ,
+ 4070 ,
+ 4080 ,
+ 4090 ,
+ 4100 ,
+ 4110 ,
+ 4120 ,
+ 4130 ,
+ 4140 ,
+ 4150 ,
+ 4160 ,
+ 4170 ,
+ 4180 ,
+ 4190 ,
+ 4200 ,
+ 4210 ,
+ 4220 ,
+ 4230 ,
+ 4240 ,
+ 4250 ,
+ 4260 ,
+ 4270 ,
+ 4280 ,
+ 4290 ,
+ 4300 ,
+ 4310 ,
+ 4320 ,
+ 4330 ,
+ 4340 ,
+ 4350 ,
+ 4360 ,
+ 4370 ,
+ 4380 ,
+ 4390 ,
+ 4400 ,
+ 4410 ,
+ 4420 ,
+ 4430 ,
+ 4440 ,
+ 4450 ,
+ 4460 ,
+ 4470 ,
+ 4480 ,
+ 4490 ,
+ 4500 ,
+ 4510 ,
+ 4520 ,
+ 4530 ,
+ 4540 ,
+ 4550 ,
+ 4560 ,
+ 4570 ,
+ 4580 ,
+ 4590 ,
+ 4600 ,
+};
+
+/*
+ * This array maps the raw hex value to charger current used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_current_map[] = {
+ 100 ,
+ 200 ,
+ 300 ,
+ 400 ,
+ 500 ,
+ 600 ,
+ 700 ,
+ 800 ,
+ 900 ,
+ 1000 ,
+ 1100 ,
+ 1200 ,
+ 1300 ,
+ 1400 ,
+ 1500 ,
+};
+
+/*
+ * This array maps the raw hex value to VBUS input current used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_vbus_in_curr_map[] = {
+ USB_CH_IP_CUR_LVL_0P05,
+ USB_CH_IP_CUR_LVL_0P09,
+ USB_CH_IP_CUR_LVL_0P19,
+ USB_CH_IP_CUR_LVL_0P29,
+ USB_CH_IP_CUR_LVL_0P38,
+ USB_CH_IP_CUR_LVL_0P45,
+ USB_CH_IP_CUR_LVL_0P5,
+ USB_CH_IP_CUR_LVL_0P6,
+ USB_CH_IP_CUR_LVL_0P7,
+ USB_CH_IP_CUR_LVL_0P8,
+ USB_CH_IP_CUR_LVL_0P9,
+ USB_CH_IP_CUR_LVL_1P0,
+ USB_CH_IP_CUR_LVL_1P1,
+ USB_CH_IP_CUR_LVL_1P3,
+ USB_CH_IP_CUR_LVL_1P4,
+ USB_CH_IP_CUR_LVL_1P5,
+};
+
+static int ab8500_voltage_to_regval(int voltage)
+{
+ int i;
+
+ /* Special case for voltage below 3.5V */
+ if (voltage < ab8500_charger_voltage_map[0])
+ return LOW_VOLT_REG;
+
+ for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
+ if (voltage < ab8500_charger_voltage_map[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
+ if (voltage == ab8500_charger_voltage_map[i])
+ return i;
+ else
+ return -1;
+}
+
+static int ab8500_current_to_regval(int curr)
+{
+ int i;
+
+ if (curr < ab8500_charger_current_map[0])
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
+ if (curr < ab8500_charger_current_map[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
+ if (curr == ab8500_charger_current_map[i])
+ return i;
+ else
+ return -1;
+}
+
+static int ab8500_vbus_in_curr_to_regval(int curr)
+{
+ int i;
+
+ if (curr < ab8500_charger_vbus_in_curr_map[0])
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
+ if (curr < ab8500_charger_vbus_in_curr_map[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
+ if (curr == ab8500_charger_vbus_in_curr_map[i])
+ return i;
+ else
+ return -1;
+}
+
+/**
+ * ab8500_charger_get_usb_cur() - get usb current
+ * @di: pointer to the ab8500_charger structre
+ *
+ * The usb stack provides the maximum current that can be drawn from
+ * the standard usb host. This will be in mA.
+ * This function converts current in mA to a value that can be written
+ * to the register. Returns -1 if charging is not allowed
+ */
+static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
+{
+ switch (di->usb_state.usb_current) {
+ case 100:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+ break;
+ case 200:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19;
+ break;
+ case 300:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29;
+ break;
+ case 400:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38;
+ break;
+ case 500:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ break;
+ default:
+ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ return -1;
+ break;
+ };
+ return 0;
+}
+
+/**
+ * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: charger input current limit
+ *
+ * Sets the current that can be drawn from the USB host
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ int ret;
+ int input_curr_index;
+ int min_value;
+
+ /* We should always use to lowest current limit */
+ min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
+
+ switch (min_value) {
+ case 100:
+ if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+ min_value = USB_CH_IP_CUR_LVL_0P05;
+ break;
+ case 500:
+ if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+ min_value = USB_CH_IP_CUR_LVL_0P45;
+ break;
+ default:
+ break;
+ }
+
+ input_curr_index = ab8500_vbus_in_curr_to_regval(min_value);
+ if (input_curr_index < 0) {
+ dev_err(di->dev, "VBUS input current limit too high\n");
+ return -ENXIO;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_IPT_CRNTLVL_REG,
+ input_curr_index << VBUS_IN_CURR_LIM_SHIFT);
+ if (ret)
+ dev_err(di->dev, "%s write failed\n", __func__);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_led_en() - turn on/off chargign led
+ * @di: pointer to the ab8500_charger structure
+ * @on: flag to turn on/off the chargign led
+ *
+ * Power ON/OFF charging LED indication
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
+{
+ int ret;
+
+ if (on) {
+ /* Power ON charging LED indicator, set LED current to 5mA */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_CTRL,
+ (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
+ if (ret) {
+ dev_err(di->dev, "Power ON LED failed\n");
+ return ret;
+ }
+ /* LED indicator PWM duty cycle 252/256 */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_DUTY,
+ LED_INDICATOR_PWM_DUTY_252_256);
+ if (ret) {
+ dev_err(di->dev, "Set LED PWM duty cycle failed\n");
+ return ret;
+ }
+ } else {
+ /* Power off charging LED indicator */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_CTRL,
+ LED_INDICATOR_PWM_DIS);
+ if (ret) {
+ dev_err(di->dev, "Power-off LED failed\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_ac_en() - enable or disable ac charging
+ * @di: pointer to the ab8500_charger structure
+ * @enable: enable/disable flag
+ * @vset: charging voltage
+ * @iset: charging current
+ *
+ * Enable/Disable AC/Mains charging and turns on/off the charging led
+ * respectively.
+ **/
+static int ab8500_charger_ac_en(struct ux500_charger *charger,
+ int enable, int vset, int iset)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ int input_curr_index;
+ u8 overshoot = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+ if (enable) {
+ /* Check if AC is connected */
+ if (!di->ac.charger_connected) {
+ dev_err(di->dev, "AC charger not connected\n");
+ return -ENXIO;
+ }
+
+ /* Enable AC charging */
+ dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+
+ /*
+ * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+ * will be triggered everytime we enable the VDD ADC supply.
+ * This will turn off charging for a short while.
+ * It can be avoided by having the supply on when
+ * there is a charger enabled. Normally the VDD ADC supply
+ * is enabled everytime a GPADC conversion is triggered. We will
+ * force it to be enabled from this driver to have
+ * the GPADC module independant of the AB8500 chargers
+ */
+ if (!di->vddadc_en_ac) {
+ regulator_enable(di->regu);
+ di->vddadc_en_ac = true;
+ }
+
+ /* Check if the requested voltage or current is valid */
+ volt_index = ab8500_voltage_to_regval(vset);
+ curr_index = ab8500_current_to_regval(iset);
+ input_curr_index = ab8500_current_to_regval(
+ di->bat->chg_params->ac_curr_max);
+ if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
+ dev_err(di->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ /* ChVoltLevel: maximum battery charging voltage */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* MainChInputCurr: current that can be drawn from the charger*/
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_IPT_CURLVL_REG,
+ input_curr_index << MAIN_CH_INPUT_CURR_SHIFT);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* ChOutputCurentLevel: protected output current */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* Check if VBAT overshoot control should be enabled */
+ if (!di->bat->enable_overshoot)
+ overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
+
+ /* Enable Main Charger */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* Power on charging LED indication */
+ ret = ab8500_charger_led_en(di, true);
+ if (ret < 0)
+ dev_err(di->dev, "failed to enable LED\n");
+
+ di->ac.charger_online = 1;
+ } else {
+ /* Disable AC charging */
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the
+ * watchdog logic. That means we have to continously
+ * kick the charger watchdog even when no charger is
+ * connected. This is only valid once the AC charger
+ * has been enabled. This is a bug that is not handled
+ * by the algorithm and the watchdog have to be kicked
+ * by the charger driver when the AC charger
+ * is disabled
+ */
+ if (di->ac_conn) {
+ queue_delayed_work(di->charger_wq,
+ &di->kick_wd_work,
+ round_jiffies(WD_KICK_INTERVAL));
+ }
+
+ /*
+ * We can't turn off charging completely
+ * due to a bug in AB8500 cut1.
+ * If we do, charging will not start again.
+ * That is why we set the lowest voltage
+ * and current possible
+ */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+ } else {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_MCH_CTRL1, 0);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0)
+ dev_err(di->dev, "failed to disable LED\n");
+
+ di->ac.charger_online = 0;
+ di->ac.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (di->vddadc_en_ac) {
+ regulator_disable(di->regu);
+ di->vddadc_en_ac = false;
+ }
+
+ dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
+ }
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_usb_en() - enable usb charging
+ * @di: pointer to the ab8500_charger structure
+ * @enable: enable/disable flag
+ * @vset: charging voltage
+ * @ich_out: charger output current
+ *
+ * Enable/Disable USB charging and turns on/off the charging led respectively.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_en(struct ux500_charger *charger,
+ int enable, int vset, int ich_out)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ u8 overshoot = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+ if (enable) {
+ /* Check if USB is connected */
+ if (!di->usb.charger_connected) {
+ dev_err(di->dev, "USB charger not connected\n");
+ return -ENXIO;
+ }
+
+ /*
+ * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+ * will be triggered everytime we enable the VDD ADC supply.
+ * This will turn off charging for a short while.
+ * It can be avoided by having the supply on when
+ * there is a charger enabled. Normally the VDD ADC supply
+ * is enabled everytime a GPADC conversion is triggered. We will
+ * force it to be enabled from this driver to have
+ * the GPADC module independant of the AB8500 chargers
+ */
+ if (!di->vddadc_en_usb) {
+ regulator_enable(di->regu);
+ di->vddadc_en_usb = true;
+ }
+
+ /* Enable USB charging */
+ dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out);
+
+ /* Check if the requested voltage or current is valid */
+ volt_index = ab8500_voltage_to_regval(vset);
+ curr_index = ab8500_current_to_regval(ich_out);
+ if (volt_index < 0 || curr_index < 0) {
+ dev_err(di->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ /* ChVoltLevel: max voltage upto which battery can be charged */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+ /* ChOutputCurentLevel: protected output current */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* Check if VBAT overshoot control should be enabled */
+ if (!di->bat->enable_overshoot)
+ overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
+
+ /* Enable USB Charger */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* If success power on charging LED indication */
+ ret = ab8500_charger_led_en(di, true);
+ if (ret < 0)
+ dev_err(di->dev, "failed to enable LED\n");
+
+ queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
+
+ di->usb.charger_online = 1;
+ } else {
+ /* Disable USB charging */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, 0);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0)
+ dev_err(di->dev, "failed to disable LED\n");
+
+ di->usb.charger_online = 0;
+ di->usb.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (di->vddadc_en_usb) {
+ regulator_disable(di->regu);
+ di->vddadc_en_usb = false;
+ }
+
+ dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+
+ /* Cancel any pending Vbat check work */
+ if (delayed_work_pending(&di->check_vbat_work))
+ cancel_delayed_work(&di->check_vbat_work);
+
+ }
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_watchdog_kick() - kick charger watchdog
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Kick charger watchdog
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
+{
+ int ret;
+ struct ab8500_charger *di;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ di = to_ab8500_charger_ac_device_info(charger);
+ else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_update_charger_current() - update charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Update the charger output current for the specified charger
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
+ int ich_out)
+{
+ int ret;
+ int curr_index;
+ struct ab8500_charger *di;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+ di = to_ab8500_charger_ac_device_info(charger);
+ else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ curr_index = ab8500_current_to_regval(ich_out);
+ if (curr_index < 0) {
+ dev_err(di->dev,
+ "Charger current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* Reset the main and usb drop input current measurement counter */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARGER_CTRL,
+ 0x1);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext;
+ struct ab8500_charger *di;
+ union power_supply_propval ret;
+ int i, j;
+ bool psy_found = false;
+ struct ux500_charger *usb_chg;
+
+ usb_chg = (struct ux500_charger *)data;
+ psy = &usb_chg->psy;
+
+ di = to_ab8500_charger_usb_device_info(usb_chg);
+
+ ext = dev_get_drvdata(dev);
+
+ /* For all psy where the driver name appears in any supplied_to */
+ for (i = 0; i < ext->num_supplicants; i++) {
+ if (!strcmp(ext->supplied_to[i], psy->name))
+ psy_found = true;
+ }
+
+ if (!psy_found)
+ return 0;
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->properties[j];
+
+ if (ext->get_property(ext, prop, &ret))
+ continue;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ switch (ext->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->vbat = ret.intval / 1000;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_check_vbat_work() - keep vbus current within spec
+ * @work pointer to the work_struct structure
+ *
+ * Due to a asic bug it is necessary to lower the input current to the vbus
+ * charger when charging with at some specific levels. This issue is only valid
+ * for below a certain battery voltage. This function makes sure that the
+ * the allowed current limit isn't exceeded.
+ */
+static void ab8500_charger_check_vbat_work(struct work_struct *work)
+{
+ int t = 10;
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_vbat_work.work);
+
+ class_for_each_device(power_supply_class, NULL,
+ &di->usb_chg.psy, ab8500_charger_get_ext_psy_data);
+
+ /* First run old_vbat is 0. */
+ if (di->old_vbat == 0)
+ di->old_vbat = di->vbat;
+
+ if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
+ di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
+ (di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
+ di->vbat > VBAT_TRESH_IP_CUR_RED))) {
+
+ dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
+ " old: %d\n", di->max_usb_in_curr, di->vbat,
+ di->old_vbat);
+ ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ power_supply_changed(&di->usb_chg.psy);
+ }
+
+ di->old_vbat = di->vbat;
+
+ /*
+ * No need to check the battery voltage every second when not close to
+ * the threshold.
+ */
+ if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) &&
+ (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100)))
+ t = 1;
+
+ queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
+}
+
+/**
+ * ab8500_charger_check_hw_failure_work() - check main charger failure
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_hw_failure_work.work);
+
+ /* Check if the status bits for HW failure is still active */
+ if (di->flags.mainextchnotok) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (!(reg_value & MAIN_CH_NOK)) {
+ di->flags.mainextchnotok = false;
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+ }
+ }
+ if (di->flags.vbus_ovv) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
+ &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (!(reg_value & VBUS_OVV_TH)) {
+ di->flags.vbus_ovv = false;
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ }
+ }
+ /* If we still have a failure, schedule a new check */
+ if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+ queue_delayed_work(di->charger_wq,
+ &di->check_hw_failure_work, round_jiffies(HZ));
+ }
+}
+
+/**
+ * ab8500_charger_kick_watchdog_work() - kick the watchdog
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog.
+ *
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, kick_wd_work.work);
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ /* Schedule a new watchdog kick */
+ queue_delayed_work(di->charger_wq,
+ &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
+}
+
+/**
+ * ab8500_charger_ac_work() - work to get and set main charger status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_ac_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, ac_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if the main charger is
+ * connected by reading the status register
+ */
+ ret = ab8500_charger_detect_chargers(di);
+ if (ret < 0)
+ return;
+
+ if (ret & AC_PW_CONN) {
+ di->ac.charger_connected = 1;
+ di->ac_conn = true;
+ } else {
+ di->ac.charger_connected = 0;
+ }
+
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+ sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
+}
+
+/**
+ * ab8500_charger_detect_usb_type_work() - work to detect USB type
+ * @work: Pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+void ab8500_charger_detect_usb_type_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, detect_usb_type_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if is
+ * connected by reading the status register
+ */
+ ret = ab8500_charger_detect_chargers(di);
+ if (ret < 0)
+ return;
+
+ if (!(ret & USB_PW_CONN)) {
+ di->vbus_detected = 0;
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ } else {
+ di->vbus_detected = 1;
+
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = ab8500_charger_detect_usb_type(di);
+ if (!ret) {
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di,
+ &di->usb_chg.psy);
+ }
+ } else {
+ /* For ABB cut2.0 and onwards we have an IRQ,
+ * USB_LINK_STATUS that will be triggered when the USB
+ * link status changes. The exception is USB connected
+ * during startup. Then we don't get a
+ * USB_LINK_STATUS IRQ
+ */
+ if (di->vbus_detected_start) {
+ di->vbus_detected_start = false;
+ ret = ab8500_charger_detect_usb_type(di);
+ if (!ret) {
+ ab8500_charger_set_usb_connected(di,
+ true);
+ ab8500_power_supply_changed(di,
+ &di->usb_chg.psy);
+ }
+ }
+ }
+ }
+}
+
+/**
+ * ab8500_charger_usb_link_status_work() - work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_status_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, usb_link_status_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if is
+ * connected by reading the status register
+ */
+ ret = ab8500_charger_detect_chargers(di);
+ if (ret < 0)
+ return;
+
+ if (!(ret & USB_PW_CONN)) {
+ di->vbus_detected = 0;
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ } else {
+ di->vbus_detected = 1;
+ ret = ab8500_charger_read_usb_type(di);
+ if (!ret) {
+ /* Update maximum input current */
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr);
+ if (ret)
+ return;
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ } else if (ret == -ENXIO) {
+ /* No valid charger type detected */
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ }
+ }
+}
+
+static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
+{
+ int ret;
+ unsigned long flags;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, usb_state_changed_work);
+
+ if (!di->vbus_detected)
+ return;
+
+ spin_lock_irqsave(&di->usb_state.usb_lock, flags);
+ di->usb_state.usb_changed = false;
+ spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
+
+ /*
+ * wait for some time until you get updates from the usb stack
+ * and negotiations are completed
+ */
+ msleep(250);
+
+ if (di->usb_state.usb_changed)
+ return;
+
+ dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
+ __func__, di->usb_state.state, di->usb_state.usb_current);
+
+ switch (di->usb_state.state) {
+ case AB8500_BM_USB_STATE_RESET_HS:
+ case AB8500_BM_USB_STATE_RESET_FS:
+ case AB8500_BM_USB_STATE_SUSPEND:
+ case AB8500_BM_USB_STATE_MAX:
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ break;
+
+ case AB8500_BM_USB_STATE_RESUME:
+ /*
+ * when suspend->resume there should be delay
+ * of 1sec for enabling charging
+ */
+ msleep(1000);
+ /* Intentional fall through */
+ case AB8500_BM_USB_STATE_CONFIGURED:
+ /*
+ * USB is configured, enable charging with the charging
+ * input current obtained from USB driver
+ */
+ if (!ab8500_charger_get_usb_cur(di)) {
+ /* Update maximum input current */
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr);
+ if (ret)
+ return;
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ }
+ break;
+
+ default:
+ break;
+ };
+}
+
+/**
+ * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB charger Not OK status
+ */
+static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+ bool prev_status;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_usbchgnotok_work.work);
+
+ /* Check if the status bit for usbchargernotok is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ prev_status = di->flags.usbchargernotok;
+
+ if (reg_value & VBUS_CH_NOK) {
+ di->flags.usbchargernotok = true;
+ /* Check again in 1sec */
+ queue_delayed_work(di->charger_wq,
+ &di->check_usbchgnotok_work, HZ);
+ } else {
+ di->flags.usbchargernotok = false;
+ di->flags.vbus_collapse = false;
+ }
+
+ if (prev_status != di->flags.usbchargernotok)
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the Main thermal prot status
+ */
+static void ab8500_charger_check_main_thermal_prot_work(
+ struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_main_thermal_prot_work);
+
+ /* Check if the status bit for main_thermal_prot is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (reg_value & MAIN_CH_TH_PROT)
+ di->flags.main_thermal_prot = true;
+ else
+ di->flags.main_thermal_prot = false;
+
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB thermal prot status
+ */
+static void ab8500_charger_check_usb_thermal_prot_work(
+ struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_usb_thermal_prot_work);
+
+ /* Check if the status bit for usb_thermal_prot is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (reg_value & USB_CH_TH_PROT)
+ di->flags.usb_thermal_prot = true;
+ else
+ di->flags.usb_thermal_prot = false;
+
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger unplugged\n");
+ queue_work(di->charger_wq, &di->ac_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchplugdet_handler() - main charger plugged
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger plugged\n");
+ queue_work(di->charger_wq, &di->ac_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainextchnotok_handler() - main charger not ok
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger not ok\n");
+ di->flags.mainextchnotok = true;
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp above Main charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp ok for Main charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetf_handler() - VBUS falling detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS falling detected\n");
+ queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetr_handler() - VBUS rising detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ di->vbus_detected = true;
+ dev_dbg(di->dev, "VBUS rising detected\n");
+ queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usblinkstatus_handler() - USB link status has changed
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "USB link status changed\n");
+
+ queue_work(di->charger_wq, &di->usb_link_status_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp above USB charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp ok for USB charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Not allowed USB charger detected\n");
+ queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_chwdexp_handler() - Charger watchdog expired
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Charger watchdog expired\n");
+
+ /*
+ * The charger that was online when the watchdog expired
+ * needs to be restarted for charging to start again
+ */
+ if (di->ac.charger_online) {
+ di->ac.wd_expired = true;
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+ }
+ if (di->usb.charger_online) {
+ di->usb.wd_expired = true;
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS overvoltage detected\n");
+ di->flags.vbus_ovv = true;
+ ab8500_power_supply_changed(di, &di->usb_chg.psy);
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_ac_get_property() - get the ac/mains properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the ac/mains
+ * properties by reading the sysfs files.
+ * AC/Mains properties are online, present and voltage.
+ * online: ac/mains charging is in progress or not
+ * present: presence of the ac/mains
+ * voltage: AC/Mains voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_charger *di;
+
+ di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->flags.mainextchnotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (di->ac.wd_expired || di->usb.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (di->flags.main_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = di->ac.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = di->ac.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di);
+ val->intval = di->ac.charger_voltage * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /*
+ * This property is used to indicate when CV mode is entered
+ * for the AC charger
+ */
+ di->ac.cv_active = ab8500_charger_ac_cv(di);
+ val->intval = di->ac.cv_active;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = ab8500_charger_get_ac_current(di) * 1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_usb_get_property() - get the usb properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the usb
+ * properties by reading the sysfs files.
+ * USB properties are online, present and voltage.
+ * online: usb charging is in progress or not
+ * present: presence of the usb
+ * voltage: vbus voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_charger *di;
+
+ di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->flags.usbchargernotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (di->ac.wd_expired || di->usb.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (di->flags.usb_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (di->flags.vbus_ovv)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = di->usb.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = di->usb.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di);
+ val->intval = di->usb.charger_voltage * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /*
+ * This property is used to indicate when CV mode is entered
+ * for the USB charger
+ */
+ di->usb.cv_active = ab8500_charger_usb_cv(di);
+ val->intval = di->usb.cv_active;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = ab8500_charger_get_usb_current(di) * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ /*
+ * This property is used to indicate when VBUS has collapsed
+ * due to too high output current from the USB charger
+ */
+ if (di->flags.vbus_collapse)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_init_hw_registers() - Set up charger related registers
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Set up charger OVV, watchdog and maximum voltage registers as well as
+ * charging of the backup battery
+ */
+static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
+{
+ int ret = 0;
+
+ /* Setup maximum charger current and voltage for ABB cut2.0 */
+ if (!is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to set CH_VOLT_LVL_MAX_REG\n");
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to set CH_OPT_CRNTLVL_MAX_REG\n");
+ goto out;
+ }
+ }
+
+ /* VBUS OVV set to 6.3V and enable automatic current limitiation */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+ if (ret) {
+ dev_err(di->dev, "failed to set VBUS OVV\n");
+ goto out;
+ }
+
+ /* Enable main watchdog in OTP */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
+ if (ret) {
+ dev_err(di->dev, "failed to enable main WD in OTP\n");
+ goto out;
+ }
+
+ /* Enable main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
+ if (ret) {
+ dev_err(di->dev, "faile to enable main watchdog\n");
+ goto out;
+ }
+
+ /*
+ * Due to internal synchronisation, Enable and Kick watchdog bits
+ * cannot be enabled in a single write.
+ * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
+ * between writing Enable then Kick bits.
+ */
+ udelay(63);
+
+ /* Kick main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG,
+ (MAIN_WDOG_ENA | MAIN_WDOG_KICK));
+ if (ret) {
+ dev_err(di->dev, "failed to kick main watchdog\n");
+ goto out;
+ }
+
+ /* Disable main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
+ if (ret) {
+ dev_err(di->dev, "failed to disable main watchdog\n");
+ goto out;
+ }
+
+ /* Set watchdog timeout */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_WD_TIMER_REG, WD_TIMER);
+ if (ret) {
+ dev_err(di->dev, "failed to set charger watchdog timeout\n");
+ goto out;
+ }
+
+ /* Backup battery voltage and current */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_RTC,
+ AB8500_RTC_BACKUP_CHG_REG,
+ di->bat->bkup_bat_v |
+ di->bat->bkup_bat_i);
+ if (ret) {
+ dev_err(di->dev, "failed to setup backup battery charging\n");
+ goto out;
+ }
+
+ /* Enable backup battery charging */
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_RTC, AB8500_RTC_CTRL_REG,
+ RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
+ if (ret < 0)
+ dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+out:
+ return ret;
+}
+
+/*
+ * ab8500 charger driver interrupts and their respective isr
+ */
+static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
+ {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
+ {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
+ {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
+ {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
+ {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
+ {"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
+ {"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
+ {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
+ {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
+ {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
+ {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
+ {"VBUS_OVV", ab8500_charger_vbusovv_handler},
+ {"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+};
+
+static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *power)
+{
+ struct ab8500_charger *di =
+ container_of(nb, struct ab8500_charger, nb);
+ enum ab8500_usb_state bm_usb_state;
+ unsigned mA = *((unsigned *)power);
+
+ if (event != USB_EVENT_VBUS) {
+ dev_dbg(di->dev, "not a standard host, returning\n");
+ return NOTIFY_DONE;
+ }
+
+ /* TODO: State is fabricate here. See if charger really needs USB
+ * state or if mA is enough
+ */
+ if ((di->usb_state.usb_current == 2) && (mA > 2))
+ bm_usb_state = AB8500_BM_USB_STATE_RESUME;
+ else if (mA == 0)
+ bm_usb_state = AB8500_BM_USB_STATE_RESET_HS;
+ else if (mA == 2)
+ bm_usb_state = AB8500_BM_USB_STATE_SUSPEND;
+ else if (mA >= 8) /* 8, 100, 500 */
+ bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED;
+ else /* Should never occur */
+ bm_usb_state = AB8500_BM_USB_STATE_RESET_FS;
+
+ dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n",
+ __func__, bm_usb_state, mA);
+
+ spin_lock(&di->usb_state.usb_lock);
+ di->usb_state.usb_changed = true;
+ spin_unlock(&di->usb_state.usb_lock);
+
+ di->usb_state.state = bm_usb_state;
+ di->usb_state.usb_current = mA;
+
+ queue_work(di->charger_wq, &di->usb_state_changed_work);
+
+ return NOTIFY_OK;
+}
+
+#if defined(CONFIG_PM)
+static int ab8500_charger_resume(struct platform_device *pdev)
+{
+ int ret;
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+ if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ /* If not already pending start a new timer */
+ if (!delayed_work_pending(
+ &di->kick_wd_work)) {
+ queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+ round_jiffies(WD_KICK_INTERVAL));
+ }
+ }
+
+ /* If we still have a HW failure, schedule a new check */
+ if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+ queue_delayed_work(di->charger_wq,
+ &di->check_hw_failure_work, 0);
+ }
+
+ return 0;
+}
+
+static int ab8500_charger_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+ /* Cancel any pending HW failure check */
+ if (delayed_work_pending(&di->check_hw_failure_work))
+ cancel_delayed_work(&di->check_hw_failure_work);
+
+ return 0;
+}
+#else
+#define ab8500_charger_suspend NULL
+#define ab8500_charger_resume NULL
+#endif
+
+static int __devexit ab8500_charger_remove(struct platform_device *pdev)
+{
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+ int i, irq, ret;
+
+ /* Disable AC charging */
+ ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);
+
+ /* Disable USB charging */
+ ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);
+
+ /* Disable interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ free_irq(irq, di);
+ }
+
+ /* disable the regulator */
+ regulator_put(di->regu);
+
+ /* Backup battery voltage and current disable */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
+ if (ret < 0)
+ dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+ otg_unregister_notifier(di->otg, &di->nb);
+ otg_put_transceiver(di->otg);
+
+ /* Delete the work queue */
+ destroy_workqueue(di->charger_wq);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->usb_chg.psy);
+ power_supply_unregister(&di->ac_chg.psy);
+ platform_set_drvdata(pdev, NULL);
+ kfree(di);
+
+ return 0;
+}
+
+static int __devinit ab8500_charger_probe(struct platform_device *pdev)
+{
+ int irq, i, charger_status, ret = 0;
+ struct abx500_bm_plat_data *plat_data;
+
+ struct ab8500_charger *di =
+ kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ /* get parent data */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+ di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+ /* initialize lock */
+ spin_lock_init(&di->usb_state.usb_lock);
+
+ /* get charger specific platform data */
+ plat_data = pdev->dev.platform_data;
+ di->pdata = plat_data->charger;
+
+ if (!di->pdata) {
+ dev_err(di->dev, "no charger platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ /* get battery specific platform data */
+ di->bat = plat_data->battery;
+ if (!di->bat) {
+ dev_err(di->dev, "no battery platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ di->autopower = false;
+
+ /* AC supply */
+ /* power_supply base class */
+ di->ac_chg.psy.name = "ab8500_ac";
+ di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS;
+ di->ac_chg.psy.properties = ab8500_charger_ac_props;
+ di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props);
+ di->ac_chg.psy.get_property = ab8500_charger_ac_get_property;
+ di->ac_chg.psy.supplied_to = di->pdata->supplied_to;
+ di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ /* ux500_charger sub-class */
+ di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+ di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+ di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+ di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
+ ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+ di->ac_chg.max_out_curr = ab8500_charger_current_map[
+ ARRAY_SIZE(ab8500_charger_current_map) - 1];
+
+ /* USB supply */
+ /* power_supply base class */
+ di->usb_chg.psy.name = "ab8500_usb";
+ di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB;
+ di->usb_chg.psy.properties = ab8500_charger_usb_props;
+ di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props);
+ di->usb_chg.psy.get_property = ab8500_charger_usb_get_property;
+ di->usb_chg.psy.supplied_to = di->pdata->supplied_to;
+ di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ /* ux500_charger sub-class */
+ di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+ di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+ di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+ di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
+ ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+ di->usb_chg.max_out_curr = ab8500_charger_current_map[
+ ARRAY_SIZE(ab8500_charger_current_map) - 1];
+
+
+ /* Create a work queue for the charger */
+ di->charger_wq =
+ create_singlethread_workqueue("ab8500_charger_wq");
+ if (di->charger_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ goto free_device_info;
+ }
+
+ /* Init work for HW failure check */
+ INIT_DELAYED_WORK_DEFERRABLE(&di->check_hw_failure_work,
+ ab8500_charger_check_hw_failure_work);
+ INIT_DELAYED_WORK_DEFERRABLE(&di->check_usbchgnotok_work,
+ ab8500_charger_check_usbchargernotok_work);
+
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+ INIT_DELAYED_WORK_DEFERRABLE(&di->kick_wd_work,
+ ab8500_charger_kick_watchdog_work);
+
+ INIT_DELAYED_WORK_DEFERRABLE(&di->check_vbat_work,
+ ab8500_charger_check_vbat_work);
+
+ /* Init work for charger detection */
+ INIT_WORK(&di->usb_link_status_work,
+ ab8500_charger_usb_link_status_work);
+ INIT_WORK(&di->ac_work, ab8500_charger_ac_work);
+ INIT_WORK(&di->detect_usb_type_work,
+ ab8500_charger_detect_usb_type_work);
+
+ INIT_WORK(&di->usb_state_changed_work,
+ ab8500_charger_usb_state_changed_work);
+
+ /* Init work for checking HW status */
+ INIT_WORK(&di->check_main_thermal_prot_work,
+ ab8500_charger_check_main_thermal_prot_work);
+ INIT_WORK(&di->check_usb_thermal_prot_work,
+ ab8500_charger_check_usb_thermal_prot_work);
+
+ /*
+ * VDD ADC supply needs to be enabled from this driver when there
+ * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+ * interrupts during charging
+ */
+ di->regu = regulator_get(di->dev, "vddadc");
+ if (IS_ERR(di->regu)) {
+ ret = PTR_ERR(di->regu);
+ dev_err(di->dev, "failed to get vddadc regulator\n");
+ goto free_charger_wq;
+ }
+
+
+ /* Initialize OVV, and other registers */
+ ret = ab8500_charger_init_hw_registers(di);
+ if (ret) {
+ dev_err(di->dev, "failed to initialize ABB registers\n");
+ goto free_regulator;
+ }
+
+ /* Register AC charger class */
+ ret = power_supply_register(di->dev, &di->ac_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register AC charger\n");
+ goto free_regulator;
+ }
+
+ /* Register USB charger class */
+ ret = power_supply_register(di->dev, &di->usb_chg.psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register USB charger\n");
+ goto free_ac;
+ }
+
+ di->otg = otg_get_transceiver();
+ if (!di->otg) {
+ dev_err(di->dev, "failed to get otg transceiver\n");
+ ret = -EINVAL;
+ goto free_usb;
+ }
+ di->nb.notifier_call = ab8500_charger_usb_notifier_call;
+ ret = otg_register_notifier(di->otg, &di->nb);
+ if (ret) {
+ dev_err(di->dev, "failed to register otg notifier\n");
+ goto put_otg_transceiver;
+ }
+
+ /* Identify the connected charger types during startup */
+ charger_status = ab8500_charger_detect_chargers(di);
+ if (charger_status & AC_PW_CONN) {
+ di->ac.charger_connected = 1;
+ di->ac_conn = true;
+ ab8500_power_supply_changed(di, &di->ac_chg.psy);
+ sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
+ }
+
+ if (charger_status & USB_PW_CONN) {
+ dev_dbg(di->dev, "VBUS Detect during startup\n");
+ di->vbus_detected = true;
+ di->vbus_detected_start = true;
+ queue_work(di->charger_wq,
+ &di->detect_usb_type_work);
+ }
+
+ /* Register interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND,
+ ab8500_charger_irq[i].name, di);
+
+ if (ret != 0) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
+ , ab8500_charger_irq[i].name, irq, ret);
+ goto free_irq;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_charger_irq[i].name, irq, ret);
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ return ret;
+
+free_irq:
+ otg_unregister_notifier(di->otg, &di->nb);
+
+ /* We also have to free all successfully registered irqs */
+ for (i = i - 1; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ free_irq(irq, di);
+ }
+put_otg_transceiver:
+ otg_put_transceiver(di->otg);
+free_usb:
+ power_supply_unregister(&di->usb_chg.psy);
+free_ac:
+ power_supply_unregister(&di->ac_chg.psy);
+free_regulator:
+ regulator_put(di->regu);
+free_charger_wq:
+ destroy_workqueue(di->charger_wq);
+free_device_info:
+ kfree(di);
+
+ return ret;
+}
+
+static struct platform_driver ab8500_charger_driver = {
+ .probe = ab8500_charger_probe,
+ .remove = __devexit_p(ab8500_charger_remove),
+ .suspend = ab8500_charger_suspend,
+ .resume = ab8500_charger_resume,
+ .driver = {
+ .name = "ab8500-charger",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ab8500_charger_init(void)
+{
+ return platform_driver_register(&ab8500_charger_driver);
+}
+
+static void __exit ab8500_charger_exit(void)
+{
+ platform_driver_unregister(&ab8500_charger_driver);
+}
+
+subsys_initcall_sync(ab8500_charger_init);
+module_exit(ab8500_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-charger");
+MODULE_DESCRIPTION("AB8500 charger management driver");