diff options
| author | Fabrice Gasnier <fabrice.gasnier@st.com> | 2019-09-18 16:54:21 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-10-11 18:18:40 +0200 |
| commit | 2289b3ab663d2baa2509d7f078472068d1d3704f (patch) | |
| tree | 54c45e089e847bcfe974f26dd95fd61ffeba3e36 /drivers/pwm | |
| parent | fecdf72f6774c0c9e7c62845dfc7c9a7ea6b4816 (diff) | |
pwm: stm32-lp: Add check in case requested period cannot be achieved
[ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ]
LPTimer can use a 32KHz clock for counting. It depends on clock tree
configuration. In such a case, PWM output frequency range is limited.
Although unlikely, nothing prevents user from requesting a PWM frequency
above counting clock (32KHz for instance):
- This causes (prd - 1) = 0xffff to be written in ARR register later in
the apply() routine.
This results in badly configured PWM period (and also duty_cycle).
Add a check to report an error is such a case.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/pwm')
| -rw-r--r-- | drivers/pwm/pwm-stm32-lp.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c index 9793b296108f..3f2e4ef695d7 100644 --- a/drivers/pwm/pwm-stm32-lp.c +++ b/drivers/pwm/pwm-stm32-lp.c @@ -59,6 +59,12 @@ static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm, /* Calculate the period and prescaler value */ div = (unsigned long long)clk_get_rate(priv->clk) * state->period; do_div(div, NSEC_PER_SEC); + if (!div) { + /* Clock is too slow to achieve requested period. */ + dev_dbg(priv->chip.dev, "Can't reach %u ns\n", state->period); + return -EINVAL; + } + prd = div; while (div > STM32_LPTIM_MAX_ARR) { presc++; |