diff options
| author | Zhou Jingyu <b02241@freescale.com> | 2011-03-02 16:28:25 +0800 |
|---|---|---|
| committer | Jason Liu <r64343@freescale.com> | 2012-01-09 19:53:52 +0800 |
| commit | e46c868419024af419283854a62a2ea525a33304 (patch) | |
| tree | 2f012baeae2c810eed20f81827602580bbe69d47 /drivers/regulator | |
| parent | 3b91b5ac920ba4e716afb8618ee10d6fb7711852 (diff) | |
ENGR00141391-2 PMIC: porting da9053 to i.mx platform
Fix da9053 backlight Kconfig error
porting da9052 regulator driver
Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>
Diffstat (limited to 'drivers/regulator')
| -rwxr-xr-x[-rw-r--r--] | drivers/regulator/Kconfig | 7 | ||||
| -rwxr-xr-x[-rw-r--r--] | drivers/regulator/Makefile | 3 | ||||
| -rwxr-xr-x[-rw-r--r--] | drivers/regulator/da9052-regulator.c | 7 |
3 files changed, 15 insertions, 2 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index d7ed20f293d7..9856cc37039b 100644..100755 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -297,6 +297,13 @@ config REGULATOR_TPS6524X serial interface currently supported on the sequencer serial port controller. +config REGULATOR_DA9052 + tristate "Dialog DA9052 regulators" + depends on PMIC_DIALOG + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9052 PMIC. + config REGULATOR_TPS65910 tristate "TI TPS65910 Power Regulator" depends on MFD_TPS65910 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 3932d2ec38f3..53e0f09c1706 100644..100755 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o @@ -44,4 +45,6 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o +obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 780c82427b95..09882ddd8d92 100644..100755 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -239,13 +239,15 @@ static int da9052_ldo_buck_is_enabled(struct regulator_dev *rdev) } int da9052_ldo_buck_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV, + unsigned *selector) { struct da9052_regulator_priv *priv = rdev_get_drvdata(rdev); struct da9052_ssc_msg ssc_msg; int id = rdev_get_id(rdev); int ret; int ldo_volt = 0; + selector; /* Below if condition is there for added setvoltage attribute in sysfs */ @@ -433,7 +435,8 @@ static int __devinit da9052_regulator_probe(struct platform_device *pdev) pdev->dev.platform_data = init_data; priv->regulators[i] = regulator_register( &da9052_regulators[i].reg_desc, - &pdev->dev, priv); + &pdev->dev, init_data, + priv); if (IS_ERR(priv->regulators[i])) { ret = PTR_ERR(priv->regulators[i]); goto err; |