summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-sa1100.c
diff options
context:
space:
mode:
authorMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>2010-10-18 22:35:54 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-11-10 13:34:45 +0000
commit7decaa557a20f48aabef35f817ec16ef563567b0 (patch)
treec5b5bed714af85ff5715d81c6fd3807b3d0b3888 /drivers/rtc/rtc-sa1100.c
parentfd3ee6d3421bc05ce42ee7f48071aee72051af28 (diff)
ARM: 6454/1: sa1100: Fix for a nasty initialization bug in the RTSR.
This patch fixes a nasty initialization condition on the RTSR register. Sometimes, bit 1 will wake up set, sometimes not. This can be seen by checking the value of the RTSR by typing '$ cat /proc/driver/rtc', which has been provided by the previous patch. If this bit is set, the command '$ cat /dev/rtc0' will lock the system in an endless interrupt routine calling loop. This patch fixes the issue both at sa1100_rtc_probe(), where it avoids a spurious interrupt from happening, and at sa1100_rtc_interrupt(), which is the robust solution, though it does not avoid the first spurious interrupt. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/rtc/rtc-sa1100.c')
-rw-r--r--drivers/rtc/rtc-sa1100.c42
1 files changed, 41 insertions, 1 deletions
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index b04c8374a279..b0985f727078 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -117,7 +117,23 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
rtsr = RTSR;
/* clear interrupt sources */
RTSR = 0;
- RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ /* Fix for a nasty initialization problem the in SA11xx RTSR register.
+ * See also the comments in sa1100_rtc_probe(). */
+ if (rtsr & (RTSR_ALE | RTSR_HZE)) {
+ /* This is the original code, before there was the if test
+ * above. This code does not clear interrupts that were not
+ * enabled. */
+ RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ } else {
+ /* For some reason, it is possible to enter this routine
+ * without interruptions enabled, it has been tested with
+ * several units (Bug in SA11xx chip?).
+ *
+ * This situation leads to an infinite "loop" of interrupt
+ * routine calling and as a result the processor seems to
+ * lock on its first call to open(). */
+ RTSR = RTSR_AL | RTSR_HZ;
+ }
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
@@ -382,6 +398,30 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, rtc);
+ /* Fix for a nasty initialization problem the in SA11xx RTSR register.
+ * See also the comments in sa1100_rtc_interrupt().
+ *
+ * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
+ * interrupt pending, even though interrupts were never enabled.
+ * In this case, this bit it must be reset before enabling
+ * interruptions to avoid a nonexistent interrupt to occur.
+ *
+ * In principle, the same problem would apply to bit 0, although it has
+ * never been observed to happen.
+ *
+ * This issue is addressed both here and in sa1100_rtc_interrupt().
+ * If the issue is not addressed here, in the times when the processor
+ * wakes up with the bit set there will be one spurious interrupt.
+ *
+ * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
+ * safe side, once the condition that lead to this strange
+ * initialization is unknown and could in principle happen during
+ * normal processing.
+ *
+ * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
+ * the corresponding bits in RTSR. */
+ RTSR = RTSR_AL | RTSR_HZ;
+
return 0;
}