Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1692 insertions, 0 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
new file mode 100644
index 000000000000..ad5b776d779b
--- /dev/null
+++ b/drivers/serial/sh-sci.c
@@ -0,0 +1,1692 @@
+/*
+ * drivers/serial/sh-sci.c
+ *
+ * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
+ *
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
+ *
+ * based off of the old drivers/char/sh-sci.c by:
+ *
+ *   Copyright (C) 1999, 2000  Niibe Yutaka
+ *   Copyright (C) 2000  Sugioka Toshinobu
+ *   Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ *   Modified to support SecureEdge. David McCullough (2002)
+ *   Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bitops.h>
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/notifier.h>
+#include <linux/cpufreq.h>
+#endif
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include <linux/generic_serial.h>
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+#include <asm/sh_bios.h>
+#endif
+
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include "sh-sci.h"
+
+#ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
+
+static int kgdb_get_char(struct sci_port *port);
+static void kgdb_put_char(struct sci_port *port, char c);
+static void kgdb_handle_error(struct sci_port *port);
+static struct sci_port *kgdb_sci_port;
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct sci_port *serial_console_port = 0;
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+/* Function prototypes */
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop);
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start);
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start);
+static void sci_stop_rx(struct uart_port *port);
+static int sci_request_irq(struct sci_port *port);
+static void sci_free_irq(struct sci_port *port);
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static struct uart_driver sci_uart_driver;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+
+static void handle_error(struct uart_port *port)
+{				/* Clear error flags */
+	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+}
+
+static int get_char(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned short status;
+	int c;
+
+	local_irq_save(flags);
+        do {
+		status = sci_in(port, SCxSR);
+		if (status & SCxSR_ERRORS(port)) {
+			handle_error(port);
+			continue;
+		}
+	} while (!(status & SCxSR_RDxF(port)));
+	c = sci_in(port, SCxRDR);
+	sci_in(port, SCxSR);            /* Dummy read */
+	sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+	local_irq_restore(flags);
+
+	return c;
+}
+
+/* Taken from sh-stub.c of GDB 4.18 */
+static const char hexchars[] = "0123456789abcdef";
+
+static __inline__ char highhex(int  x)
+{
+	return hexchars[(x >> 4) & 0xf];
+}
+
+static __inline__ char lowhex(int  x)
+{
+	return hexchars[x & 0xf];
+}
+
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+
+/*
+ * Send the packet in buffer.  The host gets one chance to read it.
+ * This routine does not wait for a positive acknowledge.
+ */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static void put_char(struct uart_port *port, char c)
+{
+	unsigned long flags;
+	unsigned short status;
+
+	local_irq_save(flags);
+
+	do {
+		status = sci_in(port, SCxSR);
+	} while (!(status & SCxSR_TDxE(port)));
+
+	sci_out(port, SCxTDR, c);
+	sci_in(port, SCxSR);            /* Dummy read */
+	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+	local_irq_restore(flags);
+}
+
+static void put_string(struct sci_port *sci_port, const char *buffer, int count)
+{
+	struct uart_port *port = &sci_port->port;
+	const unsigned char *p = buffer;
+	int i;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+	int checksum;
+	int usegdb=0;
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+    	/* This call only does a trap the first time it is
+	 * called, and so is safe to do here unconditionally
+	 */
+	usegdb |= sh_bios_in_gdb_mode();
+#endif
+#ifdef CONFIG_SH_KGDB
+	usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+#endif
+
+	if (usegdb) {
+	    /*  $<packet info>#<checksum>. */
+	    do {
+		unsigned char c;
+		put_char(port, '$');
+		put_char(port, 'O'); /* 'O'utput to console */
+		checksum = 'O';
+
+		for (i=0; i<count; i++) { /* Don't use run length encoding */
+			int h, l;
+
+			c = *p++;
+			h = highhex(c);
+			l = lowhex(c);
+			put_char(port, h);
+			put_char(port, l);
+			checksum += h + l;
+		}
+		put_char(port, '#');
+		put_char(port, highhex(checksum));
+		put_char(port, lowhex(checksum));
+	    } while  (get_char(port) != '+');
+	} else
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+	for (i=0; i<count; i++) {
+		if (*p == 10)
+			put_char(port, '\r');
+		put_char(port, *p++);
+	}
+}
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+
+#ifdef CONFIG_SH_KGDB
+
+/* Is the SCI ready, ie is there a char waiting? */
+static int kgdb_is_char_ready(struct sci_port *port)
+{
+        unsigned short status = sci_in(port, SCxSR);
+
+        if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port)))
+                kgdb_handle_error(port);
+
+        return (status & SCxSR_RDxF(port));
+}
+
+/* Write a char */
+static void kgdb_put_char(struct sci_port *port, char c)
+{
+        unsigned short status;
+
+        do
+                status = sci_in(port, SCxSR);
+        while (!(status & SCxSR_TDxE(port)));
+
+        sci_out(port, SCxTDR, c);
+        sci_in(port, SCxSR);    /* Dummy read */
+        sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+}
+
+/* Get a char if there is one, else ret -1 */
+static int kgdb_get_char(struct sci_port *port)
+{
+        int c;
+
+        if (kgdb_is_char_ready(port) == 0)
+                c = -1;
+        else {
+                c = sci_in(port, SCxRDR);
+                sci_in(port, SCxSR);    /* Dummy read */
+                sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+        }
+
+        return c;
+}
+
+/* Called from kgdbstub.c to get a character, i.e. is blocking */
+static int kgdb_sci_getchar(void)
+{
+        volatile int c;
+
+        /* Keep trying to read a character, this could be neater */
+        while ((c = kgdb_get_char(kgdb_sci_port)) < 0);
+
+        return c;
+}
+
+/* Called from kgdbstub.c to put a character, just a wrapper */
+static void kgdb_sci_putchar(int c)
+{
+
+        kgdb_put_char(kgdb_sci_port, c);
+}
+
+/* Clear any errors on the SCI */
+static void kgdb_handle_error(struct sci_port *port)
+{
+        sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));  /* Clear error flags */
+}
+
+/* Breakpoint if there's a break sent on the serial port */
+static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+        struct sci_port *port = ptr;
+        unsigned short status = sci_in(port, SCxSR);
+
+        if (status & SCxSR_BRK(port)) {
+
+                /* Break into the debugger if a break is detected */
+                BREAKPOINT();
+
+                /* Clear */
+                sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+        }
+}
+
+#endif /* CONFIG_SH_KGDB */
+
+#if defined(__H8300S__)
+enum { sci_disable, sci_enable };
+
+static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl)
+{
+	volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+	int ch = (port->mapbase  - SMR0) >> 3;
+	unsigned char mask = 1 << (ch+1);
+
+	if (ctrl == sci_disable) {
+		*mstpcrl |= mask;
+	} else {
+		*mstpcrl &= ~mask;
+	}
+}
+#endif
+
+#if defined(SCI_ONLY) || defined(SCI_AND_SCIF)
+#if defined(__H8300H__) || defined(__H8300S__)
+static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+{
+	int ch = (port->mapbase - SMR0) >> 3;
+
+	/* set DDR regs */
+	H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT);
+	H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT);
+	/* tx mark output*/
+	H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
+}
+#else
+static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
+{
+}
+#endif
+#endif
+
+#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
+#if defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
+	{
+		unsigned short data;
+
+		/* We need to set SCPCR to enable RTS/CTS */
+		data = ctrl_inw(SCPCR);
+		/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+		ctrl_outw(data&0x0fcf, SCPCR);
+	}
+	if (cflag & CRTSCTS)
+		fcr_val |= SCFCR_MCE;
+	else {
+		unsigned short data;
+
+		/* We need to set SCPCR to enable RTS/CTS */
+		data = ctrl_inw(SCPCR);
+		/* Clear out SCP7MD1,0, SCP4MD1,0,
+		   Set SCP6MD1,0 = {01} (output)  */
+		ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+
+		data = ctrl_inb(SCPDR);
+		/* Set /RTS2 (bit6) = 0 */
+		ctrl_outb(data&0xbf, SCPDR);
+	}
+#endif
+	sci_out(port, SCFCR, fcr_val);
+}
+
+static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+
+	if (cflag & CRTSCTS)
+		fcr_val |= SCFCR_MCE;
+
+	sci_out(port, SCFCR, fcr_val);
+}
+
+#else
+
+/* For SH7750 */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+
+	if (cflag & CRTSCTS) {
+		fcr_val |= SCFCR_MCE;
+	} else {
+		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+	}
+	sci_out(port, SCFCR, fcr_val);
+}
+
+#endif
+#endif /* SCIF_ONLY || SCI_AND_SCIF */
+
+/* ********************************************************************** *
+ *                   the interrupt related routines                       *
+ * ********************************************************************** */
+
+static void sci_transmit_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	unsigned int stopped = uart_tx_stopped(port);
+	unsigned long flags;
+	unsigned short status;
+	unsigned short ctrl;
+	int count, txroom;
+
+	status = sci_in(port, SCxSR);
+	if (!(status & SCxSR_TDxE(port))) {
+		local_irq_save(flags);
+		ctrl = sci_in(port, SCSCR);
+		if (uart_circ_empty(xmit)) {
+			ctrl &= ~SCI_CTRL_FLAGS_TIE;
+		} else {
+			ctrl |= SCI_CTRL_FLAGS_TIE;
+		}
+		sci_out(port, SCSCR, ctrl);
+		local_irq_restore(flags);
+		return;
+	}
+
+#if !defined(SCI_ONLY)
+	if (port->type == PORT_SCIF) {
+		txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+	} else {
+		txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+	}
+#else
+	txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+#endif
+
+	count = txroom;
+
+	do {
+		unsigned char c;
+
+		if (port->x_char) {
+			c = port->x_char;
+			port->x_char = 0;
+		} else if (!uart_circ_empty(xmit) && !stopped) {
+			c = xmit->buf[xmit->tail];
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		} else {
+			break;
+		}
+
+		sci_out(port, SCxTDR, c);
+
+		port->icount.tx++;
+	} while (--count > 0);
+
+	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+	if (uart_circ_empty(xmit)) {
+		sci_stop_tx(port, 0);
+	} else {
+		local_irq_save(flags);
+		ctrl = sci_in(port, SCSCR);
+
+#if !defined(SCI_ONLY)
+		if (port->type == PORT_SCIF) {
+			sci_in(port, SCxSR); /* Dummy read */
+			sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+		}
+#endif
+
+		ctrl |= SCI_CTRL_FLAGS_TIE;
+		sci_out(port, SCSCR, ctrl);
+		local_irq_restore(flags);
+	}
+}
+
+/* On SH3, SCIF may read end-of-break as a space->mark char */
+#define STEPFN(c)  ({int __c=(c); (((__c-1)|(__c)) == -1); })
+
+static inline void sci_receive_chars(struct uart_port *port,
+				     struct pt_regs *regs)
+{
+	struct tty_struct *tty = port->info->tty;
+	int i, count, copied = 0;
+	unsigned short status;
+
+	status = sci_in(port, SCxSR);
+	if (!(status & SCxSR_RDxF(port)))
+		return;
+
+	while (1) {
+#if !defined(SCI_ONLY)
+		if (port->type == PORT_SCIF) {
+			count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+		} else {
+			count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+		}
+#else
+		count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+#endif
+
+		/* Don't copy more bytes than there is room for in the buffer */
+		if (tty->flip.count + count > TTY_FLIPBUF_SIZE)
+			count = TTY_FLIPBUF_SIZE - tty->flip.count;
+
+		/* If for any reason we can't copy more data, we're done! */
+		if (count == 0)
+			break;
+
+		if (port->type == PORT_SCI) {
+			char c = sci_in(port, SCxRDR);
+                       if(((struct sci_port *)port)->break_flag
+			    || uart_handle_sysrq_char(port, c, regs)) {
+				count = 0;
+			} else {
+			    tty->flip.char_buf_ptr[0] = c;
+			    tty->flip.flag_buf_ptr[0] = TTY_NORMAL;
+			}
+		} else {
+			for (i=0; i<count; i++) {
+				char c = sci_in(port, SCxRDR);
+				status = sci_in(port, SCxSR);
+#if defined(CONFIG_CPU_SH3)
+				/* Skip "chars" during break */
+				if (((struct sci_port *)port)->break_flag) {
+					if ((c == 0) &&
+					    (status & SCxSR_FER(port))) {
+						count--; i--;
+						continue;
+					}
+					/* Nonzero => end-of-break */
+					pr_debug("scif: debounce<%02x>\n", c);
+					((struct sci_port *)port)->break_flag = 0;
+					if (STEPFN(c)) {
+						count--; i--;
+						continue;
+					}
+				}
+#endif /* CONFIG_CPU_SH3 */
+				if (uart_handle_sysrq_char(port, c, regs)) {
+					count--; i--;
+					continue;
+				}
+
+				/* Store data and status */
+				tty->flip.char_buf_ptr[i] = c;
+				if (status&SCxSR_FER(port)) {
+					tty->flip.flag_buf_ptr[i] = TTY_FRAME;
+					pr_debug("sci: frame error\n");
+				} else if (status&SCxSR_PER(port)) {
+					tty->flip.flag_buf_ptr[i] = TTY_PARITY;
+					pr_debug("sci: parity error\n");
+				} else {
+					tty->flip.flag_buf_ptr[i] = TTY_NORMAL;
+				}
+			}
+		}
+
+		sci_in(port, SCxSR); /* dummy read */
+		sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+
+		/* Update the kernel buffer end */
+		tty->flip.count += count;
+		tty->flip.char_buf_ptr += count;
+		tty->flip.flag_buf_ptr += count;
+		copied += count;
+		port->icount.rx += count;
+	}
+
+	if (copied) {
+		/* Tell the rest of the system the news. New characters! */
+		tty_flip_buffer_push(tty);
+	} else {
+		sci_in(port, SCxSR); /* dummy read */
+		sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+	}
+}
+
+#define SCI_BREAK_JIFFIES (HZ/20)
+/* The sci generates interrupts during the break,
+ * 1 per millisecond or so during the break period, for 9600 baud.
+ * So dont bother disabling interrupts.
+ * But dont want more than 1 break event.
+ * Use a kernel timer to periodically poll the rx line until
+ * the break is finished.
+ */
+static void sci_schedule_break_timer(struct sci_port *port)
+{
+	port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
+	add_timer(&port->break_timer);
+}
+/* Ensure that two consecutive samples find the break over. */
+static void sci_break_timer(unsigned long data)
+{
+    struct sci_port * port = (struct sci_port *)data;
+	if(sci_rxd_in(&port->port) == 0) {
+		port->break_flag = 1;
+	    sci_schedule_break_timer(port);
+	} else if(port->break_flag == 1){
+		/* break is over. */
+		port->break_flag = 2;
+	    sci_schedule_break_timer(port);
+	} else port->break_flag = 0;
+}
+
+static inline int sci_handle_errors(struct uart_port *port)
+{
+	int copied = 0;
+	unsigned short status = sci_in(port, SCxSR);
+	struct tty_struct *tty = port->info->tty;
+
+	if (status&SCxSR_ORER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+		/* overrun error */
+		copied++;
+		*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+		pr_debug("sci: overrun error\n");
+	}
+
+	if (status&SCxSR_FER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+		if (sci_rxd_in(port) == 0) {
+			/* Notify of BREAK */
+			struct sci_port * sci_port = (struct sci_port *)port;
+                       if(!sci_port->break_flag) {
+	                        sci_port->break_flag = 1;
+                               sci_schedule_break_timer((struct sci_port *)port);
+				/* Do sysrq handling. */
+				if(uart_handle_break(port)) {
+					return 0;
+				}
+			        pr_debug("sci: BREAK detected\n");
+			        copied++;
+			        *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+                       }
+		}
+		else {
+			/* frame error */
+			copied++;
+			*tty->flip.flag_buf_ptr++ = TTY_FRAME;
+			pr_debug("sci: frame error\n");
+		}
+	}
+
+	if (status&SCxSR_PER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+		/* parity error */
+		copied++;
+		*tty->flip.flag_buf_ptr++ = TTY_PARITY;
+		pr_debug("sci: parity error\n");
+	}
+
+	if (copied) {
+		tty->flip.count += copied;
+		tty_flip_buffer_push(tty);
+	}
+
+	return copied;
+}
+
+static inline int sci_handle_breaks(struct uart_port *port)
+{
+	int copied = 0;
+	unsigned short status = sci_in(port, SCxSR);
+	struct tty_struct *tty = port->info->tty;
+	struct sci_port *s = &sci_ports[port->line];
+
+	if (!s->break_flag && status & SCxSR_BRK(port) &&
+	    tty->flip.count < TTY_FLIPBUF_SIZE) {
+#if defined(CONFIG_CPU_SH3)
+		/* Debounce break */
+		s->break_flag = 1;
+#endif
+		/* Notify of BREAK */
+		copied++;
+		*tty->flip.flag_buf_ptr++ = TTY_BREAK;
+		pr_debug("sci: BREAK detected\n");
+	}
+
+#if defined(SCIF_ORER)
+	/* XXX: Handle SCIF overrun error */
+	if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+		sci_out(port, SCLSR, 0);
+		if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+			copied++;
+			*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+			pr_debug("sci: overrun error\n");
+		}
+	}
+#endif
+
+	if (copied) {
+		tty->flip.count += copied;
+		tty_flip_buffer_push(tty);
+	}
+
+	return copied;
+}
+
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+	struct uart_port *port = ptr;
+
+	/* I think sci_receive_chars has to be called irrespective
+	 * of whether the I_IXOFF is set, otherwise, how is the interrupt
+	 * to be disabled?
+	 */
+	sci_receive_chars(port, regs);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+	struct uart_port *port = ptr;
+
+	sci_transmit_chars(port);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_er_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+	struct uart_port *port = ptr;
+
+	/* Handle errors */
+	if (port->type == PORT_SCI) {
+		if (sci_handle_errors(port)) {
+			/* discard character in rx buffer */
+			sci_in(port, SCxSR);
+			sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+		}
+	} else {
+#if defined(SCIF_ORER)
+		if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+			struct tty_struct *tty = port->info->tty;
+
+			sci_out(port, SCLSR, 0);
+			if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+				*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+				tty->flip.count++;
+				tty_flip_buffer_push(tty);
+				pr_debug("scif: overrun error\n");
+			}
+		}
+#endif
+		sci_rx_interrupt(irq, ptr, regs);
+	}
+
+	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+
+	/* Kick the transmission */
+	sci_tx_interrupt(irq, ptr, regs);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+	struct uart_port *port = ptr;
+
+	/* Handle BREAKs */
+	sci_handle_breaks(port);
+	sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+        unsigned short ssr_status, scr_status;
+        struct uart_port *port = ptr;
+
+        ssr_status = sci_in(port,SCxSR);
+        scr_status = sci_in(port,SCSCR);
+
+	/* Tx Interrupt */
+        if ((ssr_status&0x0020) && (scr_status&0x0080))
+                sci_tx_interrupt(irq, ptr, regs);
+	/* Rx Interrupt */
+        if ((ssr_status&0x0002) && (scr_status&0x0040))
+                sci_rx_interrupt(irq, ptr, regs);
+	/* Error Interrupt */
+        if ((ssr_status&0x0080) && (scr_status&0x0400))
+                sci_er_interrupt(irq, ptr, regs);
+	/* Break Interrupt */
+        if ((ssr_status&0x0010) && (scr_status&0x0200))
+                sci_br_interrupt(irq, ptr, regs);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Here we define a transistion notifier so that we can update all of our
+ * ports' baud rate when the peripheral clock changes.
+ */
+static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p)
+{
+	struct cpufreq_freqs *freqs = p;
+	int i;
+
+	if ((phase == CPUFREQ_POSTCHANGE) ||
+	    (phase == CPUFREQ_RESUMECHANGE)){
+		for (i = 0; i < SCI_NPORTS; i++) {
+			struct uart_port *port = &sci_ports[i].port;
+
+			/*
+			 * Update the uartclk per-port if frequency has
+			 * changed, since it will no longer necessarily be
+			 * consistent with the old frequency.
+			 *
+			 * Really we want to be able to do something like
+			 * uart_change_speed() or something along those lines
+			 * here to implicitly reset the per-port baud rate..
+			 *
+			 * Clean this up later..
+			 */
+			port->uartclk = current_cpu_data.module_clock * 16;
+		}
+
+		printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
+				__FUNCTION__, freqs->cpu, freqs->old, freqs->new);
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+#endif /* CONFIG_CPU_FREQ */
+
+static int sci_request_irq(struct sci_port *port)
+{
+	int i;
+	irqreturn_t (*handlers[4])(int irq, void *ptr, struct pt_regs *regs) = {
+		sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
+		sci_br_interrupt,
+	};
+	const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
+			       "SCI Transmit Data Empty", "SCI Break" };
+
+	if (port->irqs[0] == port->irqs[1]) {
+		if (!port->irqs[0]) {
+			printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+			return -ENODEV;
+		}
+		if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT,
+				"sci", port)) {
+			printk(KERN_ERR "sci: Cannot allocate irq.\n");
+			return -ENODEV;
+		}
+	} else {
+		for (i = 0; i < ARRAY_SIZE(handlers); i++) {
+			if (!port->irqs[i])
+				continue;
+			if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT,
+					desc[i], port)) {
+				printk(KERN_ERR "sci: Cannot allocate irq.\n");
+				return -ENODEV;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void sci_free_irq(struct sci_port *port)
+{
+	int i;
+
+        if (port->irqs[0] == port->irqs[1]) {
+                if (!port->irqs[0])
+                        printk("sci: sci_free_irq error\n");
+		else
+                        free_irq(port->irqs[0], port);
+        } else {
+		for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
+			if (!port->irqs[i])
+				continue;
+
+			free_irq(port->irqs[i], port);
+		}
+	}
+}
+
+static unsigned int sci_tx_empty(struct uart_port *port)
+{
+	/* Can't detect */
+	return TIOCSER_TEMT;
+}
+
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
+	/* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
+	/* If you have signals for DTR and DCD, please implement here. */
+}
+
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+	/* This routine is used for geting signals of: DTR, DCD, DSR, RI,
+	   and CTS/RTS */
+
+	return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+}
+
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+	struct sci_port *s = &sci_ports[port->line];
+
+	disable_irq(s->irqs[SCIx_TXI_IRQ]);
+	sci_transmit_chars(port);
+	enable_irq(s->irqs[SCIx_TXI_IRQ]);
+}
+
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+	unsigned long flags;
+	unsigned short ctrl;
+
+	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+	local_irq_save(flags);
+	ctrl = sci_in(port, SCSCR);
+	ctrl &= ~SCI_CTRL_FLAGS_TIE;
+	sci_out(port, SCSCR, ctrl);
+	local_irq_restore(flags);
+}
+
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
+{
+	unsigned long flags;
+	unsigned short ctrl;
+
+	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
+	local_irq_save(flags);
+	ctrl = sci_in(port, SCSCR);
+	ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+	sci_out(port, SCSCR, ctrl);
+	local_irq_restore(flags);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned short ctrl;
+
+	/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
+	local_irq_save(flags);
+	ctrl = sci_in(port, SCSCR);
+	ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
+	sci_out(port, SCSCR, ctrl);
+	local_irq_restore(flags);
+}
+
+static void sci_enable_ms(struct uart_port *port)
+{
+	/* Nothing here yet .. */
+}
+
+static void sci_break_ctl(struct uart_port *port, int break_state)
+{
+	/* Nothing here yet .. */
+}
+
+static int sci_startup(struct uart_port *port)
+{
+	struct sci_port *s = &sci_ports[port->line];
+
+#if defined(__H8300S__)
+	h8300_sci_enable(port, sci_enable);
+#endif
+
+	sci_request_irq(s);
+	sci_start_tx(port, 1);
+	sci_start_rx(port, 1);
+
+	return 0;
+}
+
+static void sci_shutdown(struct uart_port *port)
+{
+	struct sci_port *s = &sci_ports[port->line];
+
+	sci_stop_rx(port);
+	sci_stop_tx(port, 1);
+	sci_free_irq(s);
+
+#if defined(__H8300S__)
+	h8300_sci_enable(port, sci_disable);
+#endif
+}
+
+static void sci_set_termios(struct uart_port *port, struct termios *termios,
+			    struct termios *old)
+{
+	struct sci_port *s = &sci_ports[port->line];
+	unsigned int status, baud, smr_val;
+	unsigned long flags;
+	int t;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	do {
+		status = sci_in(port, SCxSR);
+	} while (!(status & SCxSR_TEND(port)));
+
+	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
+
+#if !defined(SCI_ONLY)
+	if (port->type == PORT_SCIF) {
+		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+	}
+#endif
+
+	smr_val = sci_in(port, SCSMR) & 3;
+	if ((termios->c_cflag & CSIZE) == CS7)
+		smr_val |= 0x40;
+	if (termios->c_cflag & PARENB)
+		smr_val |= 0x20;
+	if (termios->c_cflag & PARODD)
+		smr_val |= 0x30;
+	if (termios->c_cflag & CSTOPB)
+		smr_val |= 0x08;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	sci_out(port, SCSMR, smr_val);
+
+	switch (baud) {
+		case 0:		t = -1;		break;
+		case 2400:	t = BPS_2400;	break;
+		case 4800:	t = BPS_4800;	break;
+		case 9600:	t = BPS_9600;	break;
+		case 19200:	t = BPS_19200;	break;
+		case 38400:	t = BPS_38400;	break;
+		case 57600:	t = BPS_57600;	break;
+		case 115200:	t = BPS_115200;	break;
+		default:	t = SCBRR_VALUE(baud); break;
+	}
+
+	if (t > 0) {
+		if(t >= 256) {
+			sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
+			t >>= 2;
+		} else {
+			sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
+		}
+		sci_out(port, SCBRR, t);
+		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+	}
+
+	s->init_pins(port, termios->c_cflag);
+	sci_out(port, SCSCR, SCSCR_INIT(port));
+
+	if ((termios->c_cflag & CREAD) != 0)
+              sci_start_rx(port,0);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *sci_type(struct uart_port *port)
+{
+	switch (port->type) {
+		case PORT_SCI:	return "sci";
+		case PORT_SCIF:	return "scif";
+		case PORT_IRDA: return "irda";
+	}
+
+	return 0;
+}
+
+static void sci_release_port(struct uart_port *port)
+{
+	/* Nothing here yet .. */
+}
+
+static int sci_request_port(struct uart_port *port)
+{
+	/* Nothing here yet .. */
+	return 0;
+}
+
+static void sci_config_port(struct uart_port *port, int flags)
+{
+	struct sci_port *s = &sci_ports[port->line];
+
+	port->type = s->type;
+
+#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+	if (port->mapbase == 0)
+		port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
+
+	port->membase = (void *)port->mapbase;
+#endif
+}
+
+static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	struct sci_port *s = &sci_ports[port->line];
+
+	if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+		return -EINVAL;
+	if (ser->baud_base < 2400)
+		/* No paper tape reader for Mitch.. */
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct uart_ops sci_uart_ops = {
+	.tx_empty	= sci_tx_empty,
+	.set_mctrl	= sci_set_mctrl,
+	.get_mctrl	= sci_get_mctrl,
+	.start_tx	= sci_start_tx,
+	.stop_tx	= sci_stop_tx,
+	.stop_rx	= sci_stop_rx,
+	.enable_ms	= sci_enable_ms,
+	.break_ctl	= sci_break_ctl,
+	.startup	= sci_startup,
+	.shutdown	= sci_shutdown,
+	.set_termios	= sci_set_termios,
+	.type		= sci_type,
+	.release_port	= sci_release_port,
+	.request_port	= sci_request_port,
+	.config_port	= sci_config_port,
+	.verify_port	= sci_verify_port,
+};
+
+static struct sci_port sci_ports[SCI_NPORTS] = {
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+	{
+		.port	= {
+			.membase	= (void *)0xfffffe80,
+			.mapbase	= 0xfffffe80,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 25,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCI,
+		.irqs		= SCI_IRQS,
+		.init_pins	= sci_init_pins_sci,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	{
+		.port	= {
+			.membase	= (void *)SCIF0,
+			.mapbase	= SCIF0,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 55,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH3_IRDA_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port	= {
+			.membase	= (void *)SCIF2,
+			.mapbase	= SCIF2,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 59,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH3_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+	{
+		.port	= {
+			.membase	= (void *)0xfffffe80,
+			.mapbase	= 0xfffffe80,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 25,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCI,
+		.irqs		= SCI_IRQS,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xa4000150,
+			.mapbase	= 0xa4000150,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 59,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH3_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xa4000140,
+			.mapbase	= 0xa4000140,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 55,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+		.type		= PORT_IRDA,
+		.irqs		= SH3_IRDA_IRQS,
+		.init_pins	= sci_init_pins_irda,
+	}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+	{
+		.port	= {
+			.membase	= (void *)0xA4430000,
+			.mapbase	= 0xA4430000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 25,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7300_SCIF0_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+	{
+		.port	= {
+			.membase	= (void *)0xffe00000,
+			.mapbase	= 0xffe00000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 25,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH73180_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_SH_RTS7751R2D)
+	{
+		.port	= {
+			.membase	= (void *)0xffe80000,
+			.mapbase	= 0xffe80000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 43,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH4_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+	{
+		.port	= {
+			.membase	= (void *)0xffe00000,
+			.mapbase	= 0xffe00000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 25,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCI,
+		.irqs		= SCI_IRQS,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xffe80000,
+			.mapbase	= 0xffe80000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 43,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH4_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+	{
+		.port	= {
+			.membase	= (void *)0xfe600000,
+			.mapbase	= 0xfe600000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 55,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7760_SCIF0_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xfe610000,
+			.mapbase	= 0xfe610000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 75,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7760_SCIF1_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xfe620000,
+			.mapbase	= 0xfe620000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 79,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7760_SCIF2_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+	{
+		.port	= {
+			.membase	= (void *)0xffe80000,
+			.mapbase	= 0xffe80000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 43,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH4_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+	{
+		.port	= {
+			.membase	= (void *)0xffe00000,
+			.mapbase	= 0xffe00000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 26,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= STB1_SCIF1_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0xffe80000,
+			.mapbase	= 0xffe80000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 43,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH4_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+	{
+		.port	= {
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 42,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH5_SCIF_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
+	{
+		.port	= {
+			.membase	= (void *)0x00ffffb0,
+			.mapbase	= 0x00ffffb0,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 54,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8300H_SCI_IRQS0,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0x00ffffb8,
+			.mapbase	= 0x00ffffb8,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 58,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8300H_SCI_IRQS1,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0x00ffffc0,
+			.mapbase	= 0x00ffffc0,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 62,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8300H_SCI_IRQS2,
+		.init_pins	= sci_init_pins_sci,
+	},
+#elif defined(CONFIG_H8S2678)
+	{
+		.port	= {
+			.membase	= (void *)0x00ffff78,
+			.mapbase	= 0x00ffff78,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 90,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8S_SCI_IRQS0,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0x00ffff80,
+			.mapbase	= 0x00ffff80,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 94,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8S_SCI_IRQS1,
+		.init_pins	= sci_init_pins_sci,
+	},
+	{
+		.port	= {
+			.membase	= (void *)0x00ffff88,
+			.mapbase	= 0x00ffff88,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 98,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+		.type		= PORT_SCI,
+		.irqs		= H8S_SCI_IRQS2,
+		.init_pins	= sci_init_pins_sci,
+	},
+#else
+#error "CPU subtype not defined"
+#endif
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+/*
+ *	Print a string to the serial port trying not to disturb
+ *	any possible real use of the port...
+ */
+static void serial_console_write(struct console *co, const char *s,
+				 unsigned count)
+{
+	put_string(serial_console_port, s, count);
+}
+
+static int __init serial_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	int ret;
+
+	if (co->index >= SCI_NPORTS)
+		co->index = 0;
+
+	serial_console_port = &sci_ports[co->index];
+	port = &serial_console_port->port;
+	port->type = serial_console_port->type;
+
+#ifdef CONFIG_SUPERH64
+	/* This is especially needed on sh64 to remap the SCIF */
+	sci_config_port(port, 0);
+#endif
+
+	/*
+	 * We need to set the initial uartclk here, since otherwise it will
+	 * only ever be setup at sci_init() time.
+	 */
+#if !defined(__H8300H__) && !defined(__H8300S__)
+	port->uartclk = current_cpu_data.module_clock * 16;
+#else
+	port->uartclk = CONFIG_CPU_CLOCK;
+#endif
+#if defined(__H8300S__)
+	h8300_sci_enable(port, sci_enable);
+#endif
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	ret = uart_set_options(port, co, baud, parity, bits, flow);
+#if defined(__H8300H__) || defined(__H8300S__)
+	/* disable rx interrupt */
+	if (ret == 0)
+		sci_stop_rx(port);
+#endif
+	return ret;
+}
+
+static struct console serial_console = {
+	.name		= "ttySC",
+	.device		= uart_console_device,
+	.write		= serial_console_write,
+	.setup		= serial_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &sci_uart_driver,
+};
+
+static int __init sci_console_init(void)
+{
+	register_console(&serial_console);
+	return 0;
+}
+
+console_initcall(sci_console_init);
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+#ifdef CONFIG_SH_KGDB
+/*
+ * FIXME: Most of this can go away.. at the moment, we rely on
+ * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
+ * most of that can easily be done here instead.
+ *
+ * For the time being, just accept the values that were parsed earlier..
+ */
+static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
+					    int *parity, int *bits)
+{
+	*baud = kgdb_baud;
+	*parity = tolower(kgdb_parity);
+	*bits = kgdb_bits - '0';
+}
+
+/*
+ * The naming here is somewhat misleading, since kgdb_console_setup() takes
+ * care of the early-on initialization for kgdb, regardless of whether we
+ * actually use kgdb as a console or not.
+ *
+ * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
+ */
+int __init kgdb_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port = &sci_ports[kgdb_portnum].port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+		co->index = kgdb_portnum;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		kgdb_console_get_options(port, &baud, &parity, &bits);
+
+	kgdb_getchar = kgdb_sci_getchar;
+	kgdb_putchar = kgdb_sci_putchar;
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SH_KGDB_CONSOLE
+static struct console kgdb_console = {
+        .name		= "ttySC",
+        .write		= kgdb_console_write,
+        .setup		= kgdb_console_setup,
+        .flags		= CON_PRINTBUFFER | CON_ENABLED,
+        .index		= -1,
+	.data		= &sci_uart_driver,
+};
+
+/* Register the KGDB console so we get messages (d'oh!) */
+static int __init kgdb_console_init(void)
+{
+	register_console(&kgdb_console);
+	return 0;
+}
+
+console_initcall(kgdb_console_init);
+#endif /* CONFIG_SH_KGDB_CONSOLE */
+
+#if defined(CONFIG_SH_KGDB_CONSOLE)
+#define SCI_CONSOLE	&kgdb_console
+#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE	&serial_console
+#else
+#define SCI_CONSOLE 	0
+#endif
+
+static char banner[] __initdata =
+	KERN_INFO "SuperH SCI(F) driver initialized\n";
+
+static struct uart_driver sci_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "sci",
+#ifdef CONFIG_DEVFS_FS
+	.devfs_name	= "ttsc/",
+#endif
+	.dev_name	= "ttySC",
+	.major		= SCI_MAJOR,
+	.minor		= SCI_MINOR_START,
+	.nr		= SCI_NPORTS,
+	.cons		= SCI_CONSOLE,
+};
+
+static int __init sci_init(void)
+{
+	int chan, ret;
+
+	printk("%s", banner);
+
+	ret = uart_register_driver(&sci_uart_driver);
+	if (ret == 0) {
+		for (chan = 0; chan < SCI_NPORTS; chan++) {
+			struct sci_port *sciport = &sci_ports[chan];
+
+#if !defined(__H8300H__) && !defined(__H8300S__)
+			sciport->port.uartclk = (current_cpu_data.module_clock * 16);
+#else
+			sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#endif
+			uart_add_one_port(&sci_uart_driver, &sciport->port);
+			sciport->break_timer.data = (unsigned long)sciport;
+			sciport->break_timer.function = sci_break_timer;
+			init_timer(&sciport->break_timer);
+		}
+	}
+
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+	printk("sci: CPU frequency notifier registered\n");
+#endif
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+	sh_bios_gdb_detach();
+#endif
+
+	return ret;
+}
+
+static void __exit sci_exit(void)
+{
+	int chan;
+
+	for (chan = 0; chan < SCI_NPORTS; chan++)
+		uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port);
+
+	uart_unregister_driver(&sci_uart_driver);
+}
+
+module_init(sci_init);
+module_exit(sci_exit);
+