summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorAlek Du <alek.du@intel.com>2011-03-30 23:09:54 +0800
committerGrant Likely <grant.likely@secretlab.ca>2011-03-30 21:31:48 -0600
commit2ff271bf6505038d8c937e73438ea3c80c387439 (patch)
tree082f4462c98661a6b4da3e924cafe20df9cf9218 /drivers/spi
parent8a33a373e5ffb6040c58ff41ea48ba21d5f8b5e9 (diff)
spi/dw_spi: change poll mode transfer from byte ops to batch ops
Current poll transfer will read/write one word, then wait till the hw is non-busy, it's not efficient. This patch will try to read/write as many words as permitted by hardware FIFO depth. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/dw_spi.c71
1 files changed, 48 insertions, 23 deletions
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index d3aaf8db86cc..7a2a72268f0a 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -160,6 +160,37 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
}
#endif /* CONFIG_DEBUG_FS */
+/* Return the max entries we can fill into tx fifo */
+static inline u32 tx_max(struct dw_spi *dws)
+{
+ u32 tx_left, tx_room, rxtx_gap;
+
+ tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
+ tx_room = dws->fifo_len - dw_readw(dws, txflr);
+
+ /*
+ * Another concern is about the tx/rx mismatch, we
+ * though to use (dws->fifo_len - rxflr - txflr) as
+ * one maximum value for tx, but it doesn't cover the
+ * data which is out of tx/rx fifo and inside the
+ * shift registers. So a control from sw point of
+ * view is taken.
+ */
+ rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx))
+ / dws->n_bytes;
+
+ return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap));
+}
+
+/* Return the max entries we should read out of rx fifo */
+static inline u32 rx_max(struct dw_spi *dws)
+{
+ u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
+
+ return min(rx_left, (u32)dw_readw(dws, rxflr));
+}
+
+
static void wait_till_not_busy(struct dw_spi *dws)
{
unsigned long end = jiffies + 1 + usecs_to_jiffies(5000);
@@ -175,33 +206,30 @@ static void wait_till_not_busy(struct dw_spi *dws)
static int dw_writer(struct dw_spi *dws)
{
+ u32 max = tx_max(dws);
u16 txw = 0;
- if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
- || (dws->tx == dws->tx_end))
- return 0;
-
- /* Set the tx word if the transfer's original "tx" is not null */
- if (dws->tx_end - dws->len) {
- if (dws->n_bytes == 1)
- txw = *(u8 *)(dws->tx);
- else
- txw = *(u16 *)(dws->tx);
+ while (max--) {
+ /* Set the tx word if the transfer's original "tx" is not null */
+ if (dws->tx_end - dws->len) {
+ if (dws->n_bytes == 1)
+ txw = *(u8 *)(dws->tx);
+ else
+ txw = *(u16 *)(dws->tx);
+ }
+ dw_writew(dws, dr, txw);
+ dws->tx += dws->n_bytes;
}
- dw_writew(dws, dr, txw);
- dws->tx += dws->n_bytes;
-
- wait_till_not_busy(dws);
return 1;
}
static int dw_reader(struct dw_spi *dws)
{
+ u32 max = rx_max(dws);
u16 rxw;
- while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
- && (dws->rx < dws->rx_end)) {
+ while (max--) {
rxw = dw_readw(dws, dr);
/* Care rx only if the transfer's original "rx" is not null */
if (dws->rx_end - dws->len) {
@@ -213,7 +241,6 @@ static int dw_reader(struct dw_spi *dws)
dws->rx += dws->n_bytes;
}
- wait_till_not_busy(dws);
return dws->rx == dws->rx_end;
}
@@ -368,13 +395,11 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
/* Must be called inside pump_transfers() */
static void poll_transfer(struct dw_spi *dws)
{
- while (dw_writer(dws))
+ do {
+ dw_writer(dws);
dw_reader(dws);
- /*
- * There is a possibility that the last word of a transaction
- * will be lost if data is not ready. Re-read to solve this issue.
- */
- dw_reader(dws);
+ cpu_relax();
+ } while (dws->rx_end > dws->rx);
dw_spi_xfer_done(dws);
}