Staging: comedi: Remove C99 comments

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 42 insertions, 34 deletions

diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index a3c887f3b2c6..ec5d9184f6a1 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -194,7 +194,7 @@ static void set_transforms(volatile struct jr3_channel *channel,
 {
 	int i;
 
-	num &= 0x000f;		// Make sure that 0 <= num <= 15
+	num &= 0x000f;		/*  Make sure that 0 <= num <= 15 */
 	for (i = 0; i < 8; i++) {
 
 		set_u16(&channel->transforms[num].link[i].link_type,
@@ -410,10 +410,10 @@ int read_idm_word(const u8 * data, size_t size, int *pos, unsigned int *val)
 {
 	int result = 0;
 	if (pos != 0 && val != 0) {
-		// Skip over non hex
+		/*  Skip over non hex */
 		for (; *pos < size && !isxdigit(data[*pos]); (*pos)++) {
 		}
-		// Collect value
+		/*  Collect value */
 		*val = 0;
 		for (; *pos < size && isxdigit(data[*pos]); (*pos)++) {
 			char ch = tolower(data[*pos]);
@@ -485,17 +485,17 @@ static int jr3_download_firmware(struct comedi_device * dev, const u8 * data,
 					count, addr);
 				while (more && count > 0) {
 					if (addr & 0x4000) {
-						// 16 bit data, never seen in real life!!
+						/*  16 bit data, never seen in real life!! */
 						unsigned int data1;
 
 						more = more
 							&& read_idm_word(data,
 							size, &pos, &data1);
 						count--;
-						// printk("jr3_data, not tested\n");
-						//        jr3[addr + 0x20000 * pnum] = data1;
+						/* printk("jr3_data, not tested\n"); */
+						/* jr3[addr + 0x20000 * pnum] = data1; */
 					} else {
-						//  Download 24 bit program
+						/*   Download 24 bit program */
 						unsigned int data1, data2;
 
 						more = more
@@ -541,7 +541,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 			p->errors = errors;
 		}
 		if (errors & (watch_dog | watch_dog2 | sensor_change)) {
-			// Sensor communication lost, force poll mode
+			/*  Sensor communication lost, force poll mode */
 			p->state = state_jr3_poll;
 
 		}
@@ -551,9 +551,10 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 				u16 serial_no = get_u16(&channel->serial_no);
 				if ((errors & (watch_dog | watch_dog2)) ||
 					model_no == 0 || serial_no == 0) {
-					// Still no sensor, keep on polling. Since it takes up to
-					// 10 seconds for offsets to stabilize, polling each
-					// second should suffice.
+/*
+ * Still no sensor, keep on polling. Since it takes up to 10 seconds
+ * for offsets to stabilize, polling each second should suffice.
+ */
 					result = poll_delay_min_max(1000, 2000);
 				} else {
 					p->retries = 0;
@@ -566,7 +567,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 		case state_jr3_init_wait_for_offset:{
 				p->retries++;
 				if (p->retries < 10) {
-					// Wait for offeset to stabilize (< 10 s according to manual)
+					/*  Wait for offeset to stabilize (< 10 s according to manual) */
 					result = poll_delay_min_max(1000, 2000);
 				} else {
 					struct transform_t transf;
@@ -582,7 +583,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					printk("Sensor Serial    = %i\n",
 						p->serial_no);
 
-					// Transformation all zeros
+					/*  Transformation all zeros */
 					transf.link[0].link_type =
 						(enum link_types)0;
 					transf.link[0].link_amount = 0;
@@ -600,7 +601,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					use_transform(channel, 0);
 					p->state =
 						state_jr3_init_transform_complete;
-					result = poll_delay_min_max(20, 100);	// Allow 20 ms for completion
+					result = poll_delay_min_max(20, 100);	/*  Allow 20 ms for completion */
 				}
 			} break;
 		case state_jr3_init_transform_complete:{
@@ -608,7 +609,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					printk("state_jr3_init_transform_complete complete = %d\n", is_complete(channel));
 					result = poll_delay_min_max(20, 100);
 				} else {
-					// Set full scale
+					/*  Set full scale */
 					struct six_axis_t min_full_scale;
 					struct six_axis_t max_full_scale;
 
@@ -639,7 +640,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 
 					p->state =
 						state_jr3_init_set_full_scale_complete;
-					result = poll_delay_min_max(20, 100);	// Allow 20 ms for completion
+					result = poll_delay_min_max(20, 100);	/*  Allow 20 ms for completion */
 				}
 			}
 			break;
@@ -650,7 +651,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 				} else {
 					volatile struct force_array *full_scale;
 
-					// Use ranges in kN or we will overflow arount 2000N!
+					/*  Use ranges in kN or we will overflow arount 2000N! */
 					full_scale = &channel->full_scale;
 					p->range[0].range.min =
 						-get_s16(&full_scale->fx) *
@@ -679,10 +680,10 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 						-get_s16(&full_scale->mz) * 100;
 					p->range[5].range.max =
 						get_s16(&full_scale->mz) * 100;
-					p->range[6].range.min = -get_s16(&full_scale->v1) * 100;	// ??
-					p->range[6].range.max = get_s16(&full_scale->v1) * 100;	// ??
-					p->range[7].range.min = -get_s16(&full_scale->v2) * 100;	// ??
-					p->range[7].range.max = get_s16(&full_scale->v2) * 100;	// ??
+					p->range[6].range.min = -get_s16(&full_scale->v1) * 100;	/*  ?? */
+					p->range[6].range.max = get_s16(&full_scale->v1) * 100;	/*  ?? */
+					p->range[7].range.min = -get_s16(&full_scale->v2) * 100;	/*  ?? */
+					p->range[7].range.max = get_s16(&full_scale->v2) * 100;	/*  ?? */
 					p->range[8].range.min = 0;
 					p->range[8].range.max = 65535;
 
@@ -701,7 +702,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					use_offset(channel, 0);
 					p->state =
 						state_jr3_init_use_offset_complete;
-					result = poll_delay_min_max(40, 100);	// Allow 40 ms for completion
+					result = poll_delay_min_max(40, 100);	/*  Allow 40 ms for completion */
 				}
 			}
 			break;
@@ -750,7 +751,7 @@ static void jr3_pci_poll_dev(unsigned long data)
 	comedi_spin_lock_irqsave(&dev->spinlock, flags);
 	delay = 1000;
 	now = jiffies;
-	// Poll all channels that are ready to be polled
+	/*  Poll all channels that are ready to be polled */
 	for (i = 0; i < devpriv->n_channels; i++) {
 		struct jr3_pci_subdev_private *subdevpriv = dev->subdevices[i].private;
 		if (now > subdevpriv->next_time_min) {
@@ -762,8 +763,10 @@ static void jr3_pci_poll_dev(unsigned long data)
 			subdevpriv->next_time_max =
 				jiffies + msecs_to_jiffies(sub_delay.max);
 			if (sub_delay.max && sub_delay.max < delay) {
-				// Wake up as late as possible -> poll as many channels as
-				// possible at once
+/*
+* Wake up as late as possible -> poll as many channels as possible
+* at once
+*/
 				delay = sub_delay.max;
 			}
 		}
@@ -895,7 +898,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 				(struct comedi_lrange *) & p->range[8];
 			p->maxdata_list[56] = 0xffff;
 			p->maxdata_list[57] = 0xffff;
-			// Channel specific range and maxdata
+			/*  Channel specific range and maxdata */
 			dev->subdevices[i].range_table = 0;
 			dev->subdevices[i].range_table_list =
 				p->range_table_list;
@@ -904,7 +907,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 		}
 	}
 
-	// Reset DSP card
+	/*  Reset DSP card */
 	devpriv->iobase->channel[0].reset = 0;
 
 	result = comedi_load_firmware(dev, "jr3pci.idm", jr3_download_firmware);
@@ -913,13 +916,18 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 	if (result < 0) {
 		goto out;
 	}
-	// TODO: use firmware to load preferred offset tables. Suggested format:
-	// model serial Fx Fy Fz Mx My Mz\n
-	//
-	// comedi_load_firmware(dev, "jr3_offsets_table", jr3_download_firmware);
+/*
+ * TODO: use firmware to load preferred offset tables. Suggested
+ * format:
+ *     model serial Fx Fy Fz Mx My Mz\n
+ *
+ *     comedi_load_firmware(dev, "jr3_offsets_table", jr3_download_firmware);
+ */
 
-	// It takes a few milliseconds for software to settle
-	// as much as we can read firmware version
+/*
+ * It takes a few milliseconds for software to settle as much as we
+ * can read firmware version
+ */
 	msleep_interruptible(25);
 	for (i = 0; i < 0x18; i++) {
 		printk("%c",
@@ -927,7 +935,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 				copyright[i]) >> 8);
 	}
 
-	// Start card timer
+	/*  Start card timer */
 	for (i = 0; i < devpriv->n_channels; i++) {
 		struct jr3_pci_subdev_private *p = dev->subdevices[i].private;