Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
  amba pl011: workaround for uart registers lockup
  n_gsm: fix the wrong FCS handling
  pch_uart: add missing comment about OKI ML7223
  pch_uart: Add MSI support
  tty: fix "IRQ45: nobody cared"
  PTI feature to allow user to name and mark masterchannel request.
  0 for o PTI Makefile bug.
  tty: serial: samsung.c remove legacy PM code.
  SERIAL: SC26xx: Fix link error.
  serial: mrst_max3110: initialize waitqueue earlier
  mrst_max3110: Change max missing message priority.
  tty: s5pv210: Add delay loop on fifo reset function for UART
  tty/serial: Fix XSCALE serial ports, e.g. ce4100
  serial: bfin_5xx: fix off-by-one with resource size
  drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
  tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
  tty: n_gsm: Add raw-ip support
  tty: n_gsm: expose gsmtty device nodes at ldisc open time
  pch_phub: Fix register miss-setting issue
  serial: 8250, increase PASS_LIMIT
  ...

6 files changed, 211 insertions, 20 deletions

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b4129f53fb1b..f2dfec82faf8 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -81,7 +81,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
 #define DEBUG_INTR(fmt...)	do { } while (0)
 #endif
 
-#define PASS_LIMIT	256
+#define PASS_LIMIT	512
 
 #define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
 
@@ -1107,7 +1107,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			 */
 			DEBUG_AUTOCONF("Xscale ");
 			up->port.type = PORT_XSCALE;
-			up->capabilities |= UART_CAP_UUE;
+			up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
 			return;
 		}
 	} else {
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index cf35e0dc5085..6b887d90a205 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -39,6 +39,7 @@ struct pci_serial_quirk {
 	u32	device;
 	u32	subvendor;
 	u32	subdevice;
+	int	(*probe)(struct pci_dev *dev);
 	int	(*init)(struct pci_dev *dev);
 	int	(*setup)(struct serial_private *,
 			 const struct pciserial_board *,
@@ -56,6 +57,9 @@ struct serial_private {
 	int			line[0];
 };
 
+static int pci_default_setup(struct serial_private*,
+	  const struct pciserial_board*, struct uart_port*, int);
+
 static void moan_device(const char *str, struct pci_dev *dev)
 {
 	printk(KERN_WARNING
@@ -571,6 +575,28 @@ static const struct timedia_struct {
 	{ 8, timedia_eight_port }
 };
 
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices.  Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID.  Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+	/*
+	 * Check the third digit of the subdevice ID
+	 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+	 */
+	if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+		dev_info(&dev->dev,
+			"ignoring Timedia subdevice %04x for parport_serial\n",
+			dev->subsystem_device);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int pci_timedia_init(struct pci_dev *dev)
 {
 	const unsigned short *ids;
@@ -752,6 +778,62 @@ pci_ni8430_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int pci_netmos_9900_setup(struct serial_private *priv,
+				const struct pciserial_board *board,
+				struct uart_port *port, int idx)
+{
+	unsigned int bar;
+
+	if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+		/* netmos apparently orders BARs by datasheet layout, so serial
+		 * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+		 */
+		bar = 3 * idx;
+
+		return setup_port(priv, port, bar, 0, board->reg_shift);
+	} else {
+		return pci_default_setup(priv, board, port, idx);
+	}
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ *   (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+	unsigned int c = dev->class;
+	unsigned int pi;
+	unsigned short sub_serports;
+
+	pi = (c & 0xff);
+
+	if (pi == 2) {
+		return 1;
+	} else if ((pi == 0) &&
+			   (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+		/* two possibilities: 0x30ps encodes number of parallel and
+		 * serial ports, or 0x1000 indicates *something*. This is not
+		 * immediately obvious, since the 2s1p+4s configuration seems
+		 * to offer all functionality on functions 0..2, while still
+		 * advertising the same function 3 as the 4s+2s1p config.
+		 */
+		sub_serports = dev->subsystem_device & 0xf;
+		if (sub_serports > 0) {
+			return sub_serports;
+		} else {
+			printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+			return 0;
+		}
+	}
+
+	moan_device("unknown NetMos/Mostech program interface", dev);
+	return 0;
+}
 
 static int pci_netmos_init(struct pci_dev *dev)
 {
@@ -761,12 +843,28 @@ static int pci_netmos_init(struct pci_dev *dev)
 	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
 		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
 		return 0;
+
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
 		return 0;
 
+	switch (dev->device) { /* FALLTHROUGH on all */
+		case PCI_DEVICE_ID_NETMOS_9904:
+		case PCI_DEVICE_ID_NETMOS_9912:
+		case PCI_DEVICE_ID_NETMOS_9922:
+		case PCI_DEVICE_ID_NETMOS_9900:
+			num_serial = pci_netmos_9900_numports(dev);
+			break;
+
+		default:
+			if (num_serial == 0 ) {
+				moan_device("unknown NetMos/Mostech device", dev);
+			}
+	}
+
 	if (num_serial == 0)
 		return -ENODEV;
+
 	return num_serial;
 }
 
@@ -1396,6 +1494,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.device		= PCI_DEVICE_ID_TIMEDIA_1889,
 		.subvendor	= PCI_VENDOR_ID_TIMEDIA,
 		.subdevice	= PCI_ANY_ID,
+		.probe		= pci_timedia_probe,
 		.init		= pci_timedia_init,
 		.setup		= pci_timedia_setup,
 	},
@@ -1426,7 +1525,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_netmos_init,
-		.setup		= pci_default_setup,
+		.setup		= pci_netmos_9900_setup,
 	},
 	/*
 	 * For Oxford Semiconductor Tornado based devices
@@ -1703,6 +1802,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_omegapci,
+	pbn_NETMOS9900_2s_115200,
 };
 
 /*
@@ -2404,6 +2504,11 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 0x200,
 	},
+	[pbn_NETMOS9900_2s_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+	},
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
@@ -2640,11 +2745,19 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports);
 static int __devinit
 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 {
+	struct pci_serial_quirk *quirk;
 	struct serial_private *priv;
 	const struct pciserial_board *board;
 	struct pciserial_board tmp;
 	int rc;
 
+	quirk = find_quirk(dev);
+	if (quirk->probe) {
+		rc = quirk->probe(dev);
+		if (rc)
+			return rc;
+	}
+
 	if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
 		printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
 			ent->driver_data);
@@ -2654,6 +2767,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	board = &pci_boards[ent->driver_data];
 
 	rc = pci_enable_device(dev);
+	pci_save_state(dev);
 	if (rc)
 		return rc;
 
@@ -3885,6 +3999,27 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
 
+	/* the 9901 is a rebranded 9912 */
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x3002,
+		0, 0, pbn_NETMOS9900_2s_115200 },
+
 	/*
 	 * Best Connectivity PCI Multi I/O cards
 	 */
@@ -3927,6 +4062,51 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{ 0, }
 };
 
+static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
+						pci_channel_state_t state)
+{
+	struct serial_private *priv = pci_get_drvdata(dev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (priv)
+		pciserial_suspend_ports(priv);
+
+	pci_disable_device(dev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
+{
+	int rc;
+
+	rc = pci_enable_device(dev);
+
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_restore_state(dev);
+	pci_save_state(dev);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void serial8250_io_resume(struct pci_dev *dev)
+{
+	struct serial_private *priv = pci_get_drvdata(dev);
+
+	if (priv)
+		pciserial_resume_ports(priv);
+}
+
+static struct pci_error_handlers serial8250_err_handler = {
+	.error_detected = serial8250_io_error_detected,
+	.slot_reset = serial8250_io_slot_reset,
+	.resume = serial8250_io_resume,
+};
+
 static struct pci_driver serial_pci_driver = {
 	.name		= "serial",
 	.probe		= pciserial_init_one,
@@ -3936,6 +4116,7 @@ static struct pci_driver serial_pci_driver = {
 	.resume		= pciserial_resume_one,
 #endif
 	.id_table	= serial_pci_tbl,
+	.err_handler	= &serial8250_err_handler,
 };
 
 static int __init serial8250_pci_init(void)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8f41e1123461..cb40b82daf36 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1404,7 +1404,7 @@ config SERIAL_SC26XX
 
 config SERIAL_SC26XX_CONSOLE
 	bool "Console on SC2681/SC2692 serial port"
-	depends on SERIAL_SC26XX
+	depends on SERIAL_SC26XX=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Support for Console on SC2681/SC2692 serial ports.
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 465210930890..846dfcd3ce0d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -14,6 +14,7 @@
  *along with this program; if not, write to the Free Software
  *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */
+#include <linux/kernel.h>
 #include <linux/serial_reg.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -44,6 +45,7 @@ enum {
 /* Set the max number of UART port
  * Intel EG20T PCH: 4 port
  * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+ * OKI SEMICONDUCTOR ML7223 IOH: 2 port
 */
 #define PCH_UART_NR	4
 
@@ -137,8 +139,6 @@ enum {
 #define PCH_UART_DLL		0x00
 #define PCH_UART_DLM		0x01
 
-#define DIV_ROUND(a, b)	(((a) + ((b)/2)) / (b))
-
 #define PCH_UART_IID_RLS	(PCH_UART_IIR_REI)
 #define PCH_UART_IID_RDR	(PCH_UART_IIR_RRI)
 #define PCH_UART_IID_RDR_TO	(PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
@@ -316,7 +316,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	unsigned int dll, dlm, lcr;
 	int div;
 
-	div = DIV_ROUND(priv->base_baud / 16, baud);
+	div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
 	if (div < 0 || USHRT_MAX <= div) {
 		dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 		return -EINVAL;
@@ -1429,6 +1429,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 		goto init_port_hal_free;
 	}
 
+	pci_enable_msi(pdev);
+
 	iobase = pci_resource_start(pdev, 0);
 	mapbase = pci_resource_start(pdev, 1);
 	priv->mapbase = mapbase;
@@ -1485,6 +1487,8 @@ static void pch_uart_pci_remove(struct pci_dev *pdev)
 	struct eg20t_port *priv;
 
 	priv = (struct eg20t_port *)pci_get_drvdata(pdev);
+
+	pci_disable_msi(pdev);
 	pch_uart_exit_port(priv);
 	pci_disable_device(pdev);
 	kfree(priv);
@@ -1568,6 +1572,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
 	return ret;
 
 probe_disable_device:
+	pci_disable_msi(pdev);
 	pci_disable_device(pdev);
 probe_error:
 	return ret;
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index 8dd160c96e87..8b0b888a1b76 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -83,6 +84,9 @@ static int s5pv210_serial_resetport(struct uart_port *port,
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
 
+	/* It is need to delay When reset FIFO register */
+	udelay(1);
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7ead42104c67..afc629423152 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1194,12 +1194,10 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
 
 /* UART power management code */
-
-#ifdef CONFIG_PM
-
-static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_serial_suspend(struct device *dev)
 {
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
 
 	if (port)
 		uart_suspend_port(&s3c24xx_uart_drv, port);
@@ -1207,9 +1205,9 @@ static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t stat
 	return 0;
 }
 
-static int s3c24xx_serial_resume(struct platform_device *dev)
+static int s3c24xx_serial_resume(struct device *dev)
 {
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (port) {
@@ -1222,17 +1220,20 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
 
 	return 0;
 }
-#endif
+
+static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
+	.suspend = s3c24xx_serial_suspend,
+	.resume = s3c24xx_serial_resume,
+};
+#else /* !CONFIG_PM_SLEEP */
+#define s3c24xx_serial_pm_ops	NULL
+#endif /* CONFIG_PM_SLEEP */
 
 int s3c24xx_serial_init(struct platform_driver *drv,
 			struct s3c24xx_uart_info *info)
 {
 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
-#ifdef CONFIG_PM
-	drv->suspend = s3c24xx_serial_suspend;
-	drv->resume = s3c24xx_serial_resume;
-#endif
+	drv->driver.pm = &s3c24xx_serial_pm_ops;
 
 	return platform_driver_register(drv);
 }