Merge tag 'v4.4.288' into toradex_vf_4.4

This is the 4.4.288 stable release

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

11 files changed, 81 insertions, 20 deletions

diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a75146f600cb..3e29f5f0d4ca 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1051,7 +1051,7 @@ static const struct tty_operations hvsi_ops = {
 
 static int __init hvsi_init(void)
 {
-	int i;
+	int i, ret;
 
 	hvsi_driver = alloc_tty_driver(hvsi_count);
 	if (!hvsi_driver)
@@ -1082,12 +1082,25 @@ static int __init hvsi_init(void)
 	}
 	hvsi_wait = wait_for_state; /* irqs active now */
 
-	if (tty_register_driver(hvsi_driver))
-		panic("Couldn't register hvsi console driver\n");
+	ret = tty_register_driver(hvsi_driver);
+	if (ret) {
+		pr_err("Couldn't register hvsi console driver\n");
+		goto err_free_irq;
+	}
 
 	printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
 
 	return 0;
+err_free_irq:
+	hvsi_wait = poll_for_state;
+	for (i = 0; i < hvsi_count; i++) {
+		struct hvsi_struct *hp = &hvsi_ports[i];
+
+		free_irq(hp->virq, hp);
+	}
+	tty_driver_kref_put(hvsi_driver);
+
+	return ret;
 }
 device_initcall(hvsi_init);
 
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 5cc80b80c82b..1a3cc6ef4331 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1437,7 +1437,7 @@ static int nozomi_card_init(struct pci_dev *pdev,
 			NOZOMI_NAME, dc);
 	if (unlikely(ret)) {
 		dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq);
-		goto err_free_kfifo;
+		goto err_free_all_kfifo;
 	}
 
 	DBG1("base_addr: %p", dc->base_addr);
@@ -1475,12 +1475,15 @@ static int nozomi_card_init(struct pci_dev *pdev,
 	return 0;
 
 err_free_tty:
-	for (i = 0; i < MAX_PORT; ++i) {
+	for (i--; i >= 0; i--) {
 		tty_unregister_device(ntty_driver, dc->index_start + i);
 		tty_port_destroy(&dc->port[i].port);
 	}
+	free_irq(pdev->irq, dc);
+err_free_all_kfifo:
+	i = MAX_PORT;
 err_free_kfifo:
-	for (i = 0; i < MAX_PORT; i++)
+	for (i--; i >= PORT_MDM; i--)
 		kfifo_free(&dc->port[i].fifo_ul);
 err_free_sbuf:
 	kfree(dc->send_buf);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 72f6cde146b5..db66e533319e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -78,7 +78,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 
 static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
-	   int bar, int offset, int regshift)
+	   u8 bar, unsigned int offset, int regshift)
 {
 	struct pci_dev *dev = priv->dev;
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fef1b9335f60..d0d90752f9f3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -124,7 +124,8 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16C950/954",
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+		.rxtrig_bytes	= {16, 32, 112, 120},
 		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
@@ -274,7 +275,11 @@ configured less than Maximum supported fifo bytes */
 /* Uart divisor latch read */
 static int default_serial_dl_read(struct uart_8250_port *up)
 {
-	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+	/* Assign these in pieces to truncate any bits above 7.  */
+	unsigned char dll = serial_in(up, UART_DLL);
+	unsigned char dlm = serial_in(up, UART_DLM);
+
+	return dll | dlm << 8;
 }
 
 /* Uart divisor latch write */
@@ -1160,9 +1165,11 @@ static void autoconfig(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	scratch = serial_in(up, UART_IIR) >> 6;
 
-	switch (scratch) {
+	/* Assign this as it is to truncate any bits above 7.  */
+	scratch = serial_in(up, UART_IIR);
+
+	switch (scratch >> 6) {
 	case 0:
 		autoconfig_8250(up);
 		break;
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 1a14948c86d6..92c64ed12295 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -305,6 +305,7 @@ static int serial_resume(struct pcmcia_device *link)
 static int serial_probe(struct pcmcia_device *link)
 {
 	struct serial_info *info;
+	int ret;
 
 	dev_dbg(&link->dev, "serial_attach()\n");
 
@@ -319,7 +320,15 @@ static int serial_probe(struct pcmcia_device *link)
 	if (do_sound)
 		link->config_flags |= CONF_ENABLE_SPKR;
 
-	return serial_config(link);
+	ret = serial_config(link);
+	if (ret)
+		goto free_info;
+
+	return 0;
+
+free_info:
+	kfree(info);
+	return ret;
 }
 
 static void serial_detach(struct pcmcia_device *link)
@@ -771,6 +780,7 @@ static const struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
 	PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
 	PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
+	PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 9e5362a3c2d4..1ee9e8110720 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1873,6 +1873,9 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
 
 	bd = lpuart32_read(sport->port.membase + UARTBAUD);
 	bd &= UARTBAUD_SBR_MASK;
+	if (!bd)
+		return;
+
 	sbr = bd;
 	uartclk = clk_get_rate(sport->clk);
 	/*
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 932b2accd06f..4ed0c099c757 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -827,7 +827,9 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 		/* Parse any modem signal changes */
 		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 			"MOD_STAT: sending to parse_modem_sigs\n");
+		spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
 		neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+		spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
 	}
 }
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 524e86ab3cae..dad3abab8280 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -195,6 +195,7 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
 
 static int jsm_tty_open(struct uart_port *port)
 {
+	unsigned long lock_flags;
 	struct jsm_board *brd;
 	struct jsm_channel *channel =
 		container_of(port, struct jsm_channel, uart_port);
@@ -248,6 +249,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
+	spin_lock_irqsave(&port->lock, lock_flags);
 	termios = &port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
@@ -267,6 +269,7 @@ static int jsm_tty_open(struct uart_port *port)
 	jsm_carrier(channel);
 
 	channel->ch_open_count++;
+	spin_unlock_irqrestore(&port->lock, lock_flags);
 
 	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index bdb25b23e8d3..c896b4e98aaa 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2287,8 +2287,6 @@ static int tty_fasync(int fd, struct file *filp, int on)
  *	Locking:
  *		Called functions take tty_ldiscs_lock
  *		current->signal->tty check is safe without locks
- *
- *	FIXME: may race normal receive processing
  */
 
 static int tiocsti(struct tty_struct *tty, char __user *p)
@@ -2302,8 +2300,10 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
 		return -EFAULT;
 	tty_audit_tiocsti(tty, ch);
 	ld = tty_ldisc_ref_wait(tty);
+	tty_buffer_lock_exclusive(tty->port);
 	if (ld->ops->receive_buf)
 		ld->ops->receive_buf(tty, &ch, &mbz, 1);
+	tty_buffer_unlock_exclusive(tty->port);
 	tty_ldisc_deref(ld);
 	return 0;
 }
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9f479b4c6491..0fab196a1d90 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -882,8 +882,25 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	new_row_size = new_cols << 1;
 	new_screen_size = new_row_size * new_rows;
 
-	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
-		return 0;
+	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) {
+		/*
+		 * This function is being called here to cover the case
+		 * where the userspace calls the FBIOPUT_VSCREENINFO twice,
+		 * passing the same fb_var_screeninfo containing the fields
+		 * yres/xres equal to a number non-multiple of vc_font.height
+		 * and yres_virtual/xres_virtual equal to number lesser than the
+		 * vc_font.height and yres/xres.
+		 * In the second call, the struct fb_var_screeninfo isn't
+		 * being modified by the underlying driver because of the
+		 * if above, and this causes the fbcon_display->vrows to become
+		 * negative and it eventually leads to out-of-bound
+		 * access by the imageblit function.
+		 * To give the correct values to the struct and to not have
+		 * to deal with possible errors from the code below, we call
+		 * the resize_screen here as well.
+		 */
+		return resize_screen(vc, new_cols, new_rows, user);
+	}
 
 	if (new_screen_size > (4 << 20))
 		return -EINVAL;
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index e1a8f4121206..97475bb46f84 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -487,16 +487,19 @@ int vt_ioctl(struct tty_struct *tty,
 			ret = -EINVAL;
 			goto out;
 		}
-		/* FIXME: this needs the console lock extending */
-		if (vc->vc_mode == (unsigned char) arg)
+		console_lock();
+		if (vc->vc_mode == (unsigned char) arg) {
+			console_unlock();
 			break;
+		}
 		vc->vc_mode = (unsigned char) arg;
-		if (console != fg_console)
+		if (console != fg_console) {
+			console_unlock();
 			break;
+		}
 		/*
 		 * explicitly blank/unblank the screen if switching modes
 		 */
-		console_lock();
 		if (arg == KD_TEXT)
 			do_unblank_screen(1);
 		else