summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 16:55:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 16:55:57 -0700
commitcb1595563880a81dab6eab9a5ecb4520d2e76077 (patch)
tree042907fc859287a40a454d57c034015742e38cbf /drivers/tty
parentc12e69c6aaf785fd307d05cb6f36ca0e7577ead7 (diff)
parent3a13884abea08a5043b98d9374486ec859d1e03a (diff)
Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_console.c6
-rw-r--r--drivers/tty/ipwireless/tty.c3
-rw-r--r--drivers/tty/n_tty.c11
-rw-r--r--drivers/tty/serial/8250/8250_core.c19
-rw-r--r--drivers/tty/serial/8250/8250_pci.c43
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/amba-pl011.c21
-rw-r--r--drivers/tty/serial/atmel_serial.c28
-rw-r--r--drivers/tty/serial/bcm63xx_uart.c16
-rw-r--r--drivers/tty/serial/clps711x.c21
-rw-r--r--drivers/tty/serial/crisv10.c112
-rw-r--r--drivers/tty/serial/efm32-uart.c5
-rw-r--r--drivers/tty/serial/fsl_lpuart.c430
-rw-r--r--drivers/tty/serial/imx.c82
-rw-r--r--drivers/tty/serial/max310x.c417
-rw-r--r--drivers/tty/serial/msm_serial.c140
-rw-r--r--drivers/tty/serial/msm_serial.h9
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/pch_uart.c2
-rw-r--r--drivers/tty/serial/samsung.c40
-rw-r--r--drivers/tty/serial/serial_core.c20
-rw-r--r--drivers/tty/serial/sh-sci.c86
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c195
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h5
-rw-r--r--drivers/tty/synclink.c1
-rw-r--r--drivers/tty/synclinkmp.c1
-rw-r--r--drivers/tty/tty_buffer.c20
-rw-r--r--drivers/tty/tty_io.c23
-rw-r--r--drivers/tty/vt/vt.c20
29 files changed, 1090 insertions, 701 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 50b46881b6ca..94f9e3a38412 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -31,6 +31,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/major.h>
+#include <linux/atomic.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -70,6 +71,9 @@ static struct task_struct *hvc_task;
/* Picks up late kicks after list walk but before schedule() */
static int hvc_kicked;
+/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */
+static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1);
+
static int hvc_init(void);
#ifdef CONFIG_MAGIC_SYSRQ
@@ -851,7 +855,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
int i;
/* We wait until a driver actually comes along */
- if (!hvc_driver) {
+ if (atomic_inc_not_zero(&hvc_needs_init)) {
int err = hvc_init();
if (err)
return ERR_PTR(err);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index ebd5bff0f5c1..17ee3bf0926b 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -176,9 +176,6 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
": %d chars not inserted to flip buffer!\n",
length - work);
- /*
- * This may sleep if ->low_latency is set
- */
if (work)
tty_flip_buffer_push(&tty->port);
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d15624c1b751..41fe8a047d37 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1900,13 +1900,10 @@ static inline int input_available_p(struct tty_struct *tty, int poll)
struct n_tty_data *ldata = tty->disc_data;
int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
- if (ldata->icanon && !L_EXTPROC(tty)) {
- if (ldata->canon_head != ldata->read_tail)
- return 1;
- } else if (read_cnt(ldata) >= amt)
- return 1;
-
- return 0;
+ if (ldata->icanon && !L_EXTPROC(tty))
+ return ldata->canon_head != ldata->read_tail;
+ else
+ return read_cnt(ldata) >= amt;
}
/**
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 69932b7556cf..81f909c2101f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1694,6 +1694,10 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
static void serial_unlink_irq_chain(struct uart_8250_port *up)
{
+ /*
+ * yes, some broken gcc emit "warning: 'i' may be used uninitialized"
+ * but no, we are not going to take a patch that assigns NULL below.
+ */
struct irq_info *i;
struct hlist_node *n;
struct hlist_head *h;
@@ -2882,14 +2886,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
touch_nmi_watchdog();
- local_irq_save(flags);
- if (port->sysrq) {
- /* serial8250_handle_irq() already took the lock */
- locked = 0;
- } else if (oops_in_progress) {
- locked = spin_trylock(&port->lock);
- } else
- spin_lock(&port->lock);
+ if (port->sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
/*
* First save the IER then disable the interrupts
@@ -2921,8 +2921,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
serial8250_modem_status(up);
if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int __init serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0ff3e3624d4c..b14bcba96c25 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1366,23 +1366,44 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = tty_termios_baud_rate(termios);
- unsigned int m = 6912;
- unsigned int n = 15625;
+ unsigned int m, n;
u32 reg;
- /* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
- if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+ /*
+ * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+ * dividers must be adjusted.
+ *
+ * uartclk = (m / n) * 100 MHz, where m <= n
+ */
+ switch (baud) {
+ case 500000:
+ case 1000000:
+ case 2000000:
+ case 4000000:
m = 64;
n = 100;
-
p->uartclk = 64000000;
- } else if (baud == 3000000) {
+ break;
+ case 3500000:
+ m = 56;
+ n = 100;
+ p->uartclk = 56000000;
+ break;
+ case 1500000:
+ case 3000000:
m = 48;
n = 100;
-
p->uartclk = 48000000;
- } else {
- p->uartclk = 44236800;
+ break;
+ case 2500000:
+ m = 40;
+ n = 100;
+ p->uartclk = 40000000;
+ break;
+ default:
+ m = 2304;
+ n = 3125;
+ p->uartclk = 73728000;
}
/* Reset the clock */
@@ -3449,6 +3470,10 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 921600,
.reg_shift = 2,
},
+ /*
+ * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on,
+ * but is overridden by byt_set_termios.
+ */
[pbn_byt] = {
.flags = FL_BASE0,
.num_ports = 1,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3815eaed421..2577d67bacb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -289,7 +289,7 @@ config SERIAL_MAX3100
MAX3100 chip support
config SERIAL_MAX310X
- bool "MAX310X support"
+ tristate "MAX310X support"
depends on SPI_MASTER
select SERIAL_CORE
select REGMAP_SPI if SPI_MASTER
@@ -708,7 +708,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
+ depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d58783d364e3..d4eda24aa68b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2154,9 +2154,19 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
amba_ports[i] = uap;
amba_set_drvdata(dev, uap);
+
+ if (!amba_reg.state) {
+ ret = uart_register_driver(&amba_reg);
+ if (ret < 0) {
+ pr_err("Failed to register AMBA-PL011 driver\n");
+ return ret;
+ }
+ }
+
ret = uart_add_one_port(&amba_reg, &uap->port);
if (ret) {
amba_ports[i] = NULL;
+ uart_unregister_driver(&amba_reg);
pl011_dma_remove(uap);
}
out:
@@ -2175,6 +2185,7 @@ static int pl011_remove(struct amba_device *dev)
amba_ports[i] = NULL;
pl011_dma_remove(uap);
+ uart_unregister_driver(&amba_reg);
return 0;
}
@@ -2230,22 +2241,14 @@ static struct amba_driver pl011_driver = {
static int __init pl011_init(void)
{
- int ret;
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
- ret = uart_register_driver(&amba_reg);
- if (ret == 0) {
- ret = amba_driver_register(&pl011_driver);
- if (ret)
- uart_unregister_driver(&amba_reg);
- }
- return ret;
+ return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
amba_driver_unregister(&pl011_driver);
- uart_unregister_driver(&amba_reg);
}
/*
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d269b2..b0603e1f7d82 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -115,9 +115,6 @@ static void atmel_stop_rx(struct uart_port *port);
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
-static int (*atmel_open_hook)(struct uart_port *);
-static void (*atmel_close_hook)(struct uart_port *);
-
struct atmel_dma_buffer {
unsigned char *buf;
dma_addr_t dma_addr;
@@ -1555,7 +1552,7 @@ static int atmel_startup(struct uart_port *port)
retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
tty ? tty->name : "atmel_serial", port);
if (retval) {
- printk("atmel_serial: atmel_startup - Can't get irq\n");
+ dev_err(port->dev, "atmel_startup - Can't get irq\n");
return retval;
}
@@ -1575,17 +1572,6 @@ static int atmel_startup(struct uart_port *port)
if (retval < 0)
atmel_set_ops(port);
}
- /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
- if (atmel_open_hook) {
- retval = atmel_open_hook(port);
- if (retval) {
- free_irq(port->irq, port);
- return retval;
- }
- }
/* Save current CSR for comparison in atmel_tasklet_func() */
atmel_port->irq_status_prev = UART_GET_CSR(port);
@@ -1684,13 +1670,6 @@ static void atmel_shutdown(struct uart_port *port)
* Free the interrupt
*/
free_irq(port->irq, port);
-
- /*
- * If there is a specific "close" function (to unregister
- * control line interrupts)
- */
- if (atmel_close_hook)
- atmel_close_hook(port);
}
/*
@@ -1738,7 +1717,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
clk_disable_unprepare(atmel_port->clk);
break;
default:
- printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+ dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
}
}
@@ -1853,13 +1832,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode &= ~ATMEL_US_USMODE;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
- dev_dbg(port->dev, "Setting UART to RS485\n");
if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
- } else {
- dev_dbg(port->dev, "Setting UART to RS232\n");
}
/* set the parity, stop bits and data size */
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 78e82b017b92..a47421e4627c 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -30,6 +30,8 @@
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_bcm63xx.h>
+#include <linux/io.h>
+#include <linux/of.h>
#define BCM63XX_NR_UARTS 2
@@ -588,7 +590,7 @@ static int bcm_uart_request_port(struct uart_port *port)
{
unsigned int size;
- size = RSET_UART_SIZE;
+ size = UART_REG_SIZE;
if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
@@ -608,7 +610,7 @@ static int bcm_uart_request_port(struct uart_port *port)
*/
static void bcm_uart_release_port(struct uart_port *port)
{
- release_mem_region(port->mapbase, RSET_UART_SIZE);
+ release_mem_region(port->mapbase, UART_REG_SIZE);
iounmap(port->membase);
}
@@ -805,6 +807,9 @@ static int bcm_uart_probe(struct platform_device *pdev)
struct clk *clk;
int ret;
+ if (pdev->dev.of_node)
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "uart");
+
if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
return -EINVAL;
@@ -856,6 +861,12 @@ static int bcm_uart_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id bcm63xx_of_match[] = {
+ { .compatible = "brcm,bcm6345-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
+
/*
* platform driver stuff
*/
@@ -865,6 +876,7 @@ static struct platform_driver bcm_uart_platform_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "bcm63xx_uart",
+ .of_match_table = bcm63xx_of_match,
},
};
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index b0eacb83f831..5e6fdb1ea73b 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -368,11 +368,16 @@ static const struct uart_ops uart_clps711x_ops = {
static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- u32 sysflg = 0;
- do {
+ /* Wait for FIFO is not full */
+ while (1) {
+ u32 sysflg = 0;
+
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
- } while (sysflg & SYSFLG_UTXFF);
+ if (!(sysflg & SYSFLG_UTXFF))
+ break;
+ cond_resched();
+ }
writew(ch, port->membase + UARTDR_OFFSET);
}
@@ -382,14 +387,18 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
{
struct uart_port *port = clps711x_uart.state[co->index].uart_port;
struct clps711x_port *s = dev_get_drvdata(port->dev);
- u32 sysflg = 0;
uart_console_write(port, c, n, uart_clps711x_console_putchar);
/* Wait for transmitter to become empty */
- do {
+ while (1) {
+ u32 sysflg = 0;
+
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
- } while (sysflg & SYSFLG_UBUSY);
+ if (!(sysflg & SYSFLG_UBUSY))
+ break;
+ cond_resched();
+ }
}
static int uart_clps711x_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 690bdea0a0c1..d567ac5d3af4 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -286,7 +286,6 @@ static struct e100_serial rs_table[] = {
#endif
}, /* ttyS0 */
-#ifndef CONFIG_SVINTO_SIM
{ .baud = DEF_BAUD,
.ioport = (unsigned char *)R_SERIAL1_CTRL,
.irq = 1U << 16, /* uses DMA 8 and 9 */
@@ -447,7 +446,6 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 0
#endif
} /* ttyS3 */
-#endif
};
@@ -1035,7 +1033,6 @@ cflag_to_etrax_baud(unsigned int cflag)
static inline void
e100_dtr(struct e100_serial *info, int set)
{
-#ifndef CONFIG_SVINTO_SIM
unsigned char mask = e100_modem_pins[info->line].dtr_mask;
#ifdef SERIAL_DEBUG_IO
@@ -1060,7 +1057,6 @@ e100_dtr(struct e100_serial *info, int set)
info->line, *e100_modem_pins[info->line].dtr_shadow,
E100_DTR_GET(info));
#endif
-#endif
}
/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
@@ -1069,7 +1065,6 @@ e100_dtr(struct e100_serial *info, int set)
static inline void
e100_rts(struct e100_serial *info, int set)
{
-#ifndef CONFIG_SVINTO_SIM
unsigned long flags;
local_irq_save(flags);
info->rx_ctrl &= ~E100_RTS_MASK;
@@ -1079,7 +1074,6 @@ e100_rts(struct e100_serial *info, int set)
#ifdef SERIAL_DEBUG_IO
printk("ser%i rts %i\n", info->line, set);
#endif
-#endif
}
@@ -1087,7 +1081,6 @@ e100_rts(struct e100_serial *info, int set)
static inline void
e100_ri_out(struct e100_serial *info, int set)
{
-#ifndef CONFIG_SVINTO_SIM
/* RI is active low */
{
unsigned char mask = e100_modem_pins[info->line].ri_mask;
@@ -1099,12 +1092,10 @@ e100_ri_out(struct e100_serial *info, int set)
*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
local_irq_restore(flags);
}
-#endif
}
static inline void
e100_cd_out(struct e100_serial *info, int set)
{
-#ifndef CONFIG_SVINTO_SIM
/* CD is active low */
{
unsigned char mask = e100_modem_pins[info->line].cd_mask;
@@ -1116,27 +1107,22 @@ e100_cd_out(struct e100_serial *info, int set)
*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
local_irq_restore(flags);
}
-#endif
}
static inline void
e100_disable_rx(struct e100_serial *info)
{
-#ifndef CONFIG_SVINTO_SIM
/* disable the receiver */
info->ioport[REG_REC_CTRL] =
(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
}
static inline void
e100_enable_rx(struct e100_serial *info)
{
-#ifndef CONFIG_SVINTO_SIM
/* enable the receiver */
info->ioport[REG_REC_CTRL] =
(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
}
/* the rx DMA uses both the dma_descr and the dma_eop interrupts */
@@ -1554,24 +1540,6 @@ transmit_chars_dma(struct e100_serial *info)
unsigned int c, sentl;
struct etrax_dma_descr *descr;
-#ifdef CONFIG_SVINTO_SIM
- /* This will output too little if tail is not 0 always since
- * we don't reloop to send the other part. Anyway this SHOULD be a
- * no-op - transmit_chars_dma would never really be called during sim
- * since rs_write does not write into the xmit buffer then.
- */
- if (info->xmit.tail)
- printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
- if (info->xmit.head != info->xmit.tail) {
- SIMCOUT(info->xmit.buf + info->xmit.tail,
- CIRC_CNT(info->xmit.head,
- info->xmit.tail,
- SERIAL_XMIT_SIZE));
- info->xmit.head = info->xmit.tail; /* move back head */
- info->tr_running = 0;
- }
- return;
-#endif
/* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
*info->oclrintradr =
IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1842,13 +1810,6 @@ static void receive_chars_dma(struct e100_serial *info)
struct tty_struct *tty;
unsigned char rstat;
-#ifdef CONFIG_SVINTO_SIM
- /* No receive in the simulator. Will probably be when the rest of
- * the serial interface works, and this piece will just be removed.
- */
- return;
-#endif
-
/* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
*info->iclrintradr =
IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1934,12 +1895,6 @@ static int start_recv_dma(struct e100_serial *info)
static void
start_receive(struct e100_serial *info)
{
-#ifdef CONFIG_SVINTO_SIM
- /* No receive in the simulator. Will probably be when the rest of
- * the serial interface works, and this piece will just be removed.
- */
- return;
-#endif
if (info->uses_dma_in) {
/* reset the input dma channel to be sure it works */
@@ -1972,17 +1927,6 @@ tr_interrupt(int irq, void *dev_id)
int i;
int handled = 0;
-#ifdef CONFIG_SVINTO_SIM
- /* No receive in the simulator. Will probably be when the rest of
- * the serial interface works, and this piece will just be removed.
- */
- {
- const char *s = "What? tr_interrupt in simulator??\n";
- SIMCOUT(s,strlen(s));
- }
- return IRQ_HANDLED;
-#endif
-
/* find out the line that caused this irq and get it from rs_table */
ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
@@ -2021,17 +1965,6 @@ rec_interrupt(int irq, void *dev_id)
int i;
int handled = 0;
-#ifdef CONFIG_SVINTO_SIM
- /* No receive in the simulator. Will probably be when the rest of
- * the serial interface works, and this piece will just be removed.
- */
- {
- const char *s = "What? rec_interrupt in simulator??\n";
- SIMCOUT(s,strlen(s));
- }
- return IRQ_HANDLED;
-#endif
-
/* find out the line that caused this irq and get it from rs_table */
ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
@@ -2173,10 +2106,6 @@ timed_flush_handler(unsigned long ptr)
struct e100_serial *info;
int i;
-#ifdef CONFIG_SVINTO_SIM
- return;
-#endif
-
for (i = 0; i < NR_PORTS; i++) {
info = rs_table + i;
if (info->uses_dma_in)
@@ -2729,25 +2658,6 @@ startup(struct e100_serial * info)
printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
#endif
-#ifdef CONFIG_SVINTO_SIM
- /* Bits and pieces collected from below. Better to have them
- in one ifdef:ed clause than to mix in a lot of ifdefs,
- right? */
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- info->xmit.head = info->xmit.tail = 0;
- info->first_recv_buffer = info->last_recv_buffer = NULL;
- info->recv_cnt = info->max_recv_cnt = 0;
-
- for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
- info->rec_descr[i].buf = NULL;
-
- /* No real action in the simulator, but may set info important
- to ioctl. */
- change_speed(info);
-#else
-
/*
* Clear the FIFO buffers and disable them
* (they will be reenabled in change_speed())
@@ -2837,8 +2747,6 @@ startup(struct e100_serial * info)
e100_rts(info, 1);
e100_dtr(info, 1);
-#endif /* CONFIG_SVINTO_SIM */
-
info->port.flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -2857,7 +2765,6 @@ shutdown(struct e100_serial * info)
struct etrax_recv_buffer *buffer;
int i;
-#ifndef CONFIG_SVINTO_SIM
/* shut down the transmitter and receiver */
DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
e100_disable_rx(info);
@@ -2882,8 +2789,6 @@ shutdown(struct e100_serial * info)
info->tr_running = 0;
}
-#endif /* CONFIG_SVINTO_SIM */
-
if (!(info->port.flags & ASYNC_INITIALIZED))
return;
@@ -2995,17 +2900,12 @@ change_speed(struct e100_serial *info)
IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
r_alt_ser_baudrate_shadow &= ~mask;
r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-#ifndef CONFIG_SVINTO_SIM
*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-#endif /* CONFIG_SVINTO_SIM */
info->baud = cflag_to_baud(cflag);
-#ifndef CONFIG_SVINTO_SIM
info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
-#endif /* CONFIG_SVINTO_SIM */
}
-#ifndef CONFIG_SVINTO_SIM
/* start with default settings and then fill in changes */
local_irq_save(flags);
/* 8 bit, no/even parity */
@@ -3073,7 +2973,6 @@ change_speed(struct e100_serial *info)
*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
local_irq_restore(flags);
-#endif /* !CONFIG_SVINTO_SIM */
update_char_time(info);
@@ -3122,11 +3021,6 @@ static int rs_raw_write(struct tty_struct *tty,
count, info->ioport[REG_STATUS]);
#endif
-#ifdef CONFIG_SVINTO_SIM
- /* Really simple. The output is here and now. */
- SIMCOUT(buf, count);
- return count;
-#endif
local_save_flags(flags);
DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3463,7 +3357,6 @@ static int
get_lsr_info(struct e100_serial * info, unsigned int *value)
{
unsigned int result = TIOCSER_TEMT;
-#ifndef CONFIG_SVINTO_SIM
unsigned long curr_time = jiffies;
unsigned long curr_time_usec = GET_JIFFIES_USEC();
unsigned long elapsed_usec =
@@ -3474,7 +3367,6 @@ get_lsr_info(struct e100_serial * info, unsigned int *value)
elapsed_usec < 2*info->char_time_usec) {
result = 0;
}
-#endif
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
@@ -3804,7 +3696,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
e100_disable_serial_data_irq(info);
#endif
-#ifndef CONFIG_SVINTO_SIM
e100_disable_rx(info);
e100_disable_rx_irq(info);
@@ -3816,7 +3707,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
*/
rs_wait_until_sent(tty, HZ);
}
-#endif
shutdown(info);
rs_flush_buffer(tty);
@@ -4479,7 +4369,6 @@ static int __init rs_init(void)
fast_timer_init();
#endif
-#ifndef CONFIG_SVINTO_SIM
#ifndef CONFIG_ETRAX_KGDB
/* Not needed in simulator. May only complicate stuff. */
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
@@ -4489,7 +4378,6 @@ static int __init rs_init(void)
panic("%s: Failed to request irq8", __func__);
#endif
-#endif /* CONFIG_SVINTO_SIM */
return 0;
}
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 0eb5b5673ede..028582e924a5 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -671,7 +671,10 @@ static int efm32_uart_probe_dt(struct platform_device *pdev,
if (!np)
return 1;
- ret = of_property_read_u32(np, "location", &location);
+ ret = of_property_read_u32(np, "efm32,location", &location);
+ if (ret)
+ /* fall back to old and (wrongly) generic property "location" */
+ ret = of_property_read_u32(np, "location", &location);
if (!ret) {
if (location > 5) {
dev_err(&pdev->dev, "invalid location\n");
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 8978dc9a58b7..c5eb897de9de 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -13,14 +13,19 @@
#define SUPPORT_SYSRQ
#endif
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/clk.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/console.h>
+#include <linux/of_dma.h>
#include <linux/serial_core.h>
+#include <linux/slab.h>
#include <linux/tty_flip.h>
/* All registers are 8-bit width */
@@ -112,6 +117,10 @@
#define UARTSFIFO_TXOF 0x02
#define UARTSFIFO_RXUF 0x01
+#define DMA_MAXBURST 16
+#define DMA_MAXBURST_MASK (DMA_MAXBURST - 1)
+#define FSL_UART_RX_DMA_BUFFER_SIZE 64
+
#define DRIVER_NAME "fsl-lpuart"
#define DEV_NAME "ttyLP"
#define UART_NR 6
@@ -121,6 +130,24 @@ struct lpuart_port {
struct clk *clk;
unsigned int txfifo_size;
unsigned int rxfifo_size;
+
+ bool lpuart_dma_use;
+ struct dma_chan *dma_tx_chan;
+ struct dma_chan *dma_rx_chan;
+ struct dma_async_tx_descriptor *dma_tx_desc;
+ struct dma_async_tx_descriptor *dma_rx_desc;
+ dma_addr_t dma_tx_buf_bus;
+ dma_addr_t dma_rx_buf_bus;
+ dma_cookie_t dma_tx_cookie;
+ dma_cookie_t dma_rx_cookie;
+ unsigned char *dma_tx_buf_virt;
+ unsigned char *dma_rx_buf_virt;
+ unsigned int dma_tx_bytes;
+ unsigned int dma_rx_bytes;
+ int dma_tx_in_progress;
+ int dma_rx_in_progress;
+ unsigned int dma_rx_timeout;
+ struct timer_list lpuart_timer;
};
static struct of_device_id lpuart_dt_ids[] = {
@@ -131,6 +158,10 @@ static struct of_device_id lpuart_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
+/* Forward declare this for the dma callbacks*/
+static void lpuart_dma_tx_complete(void *arg);
+static void lpuart_dma_rx_complete(void *arg);
+
static void lpuart_stop_tx(struct uart_port *port)
{
unsigned char temp;
@@ -152,6 +183,210 @@ static void lpuart_enable_ms(struct uart_port *port)
{
}
+static void lpuart_copy_rx_to_tty(struct lpuart_port *sport,
+ struct tty_port *tty, int count)
+{
+ int copied;
+
+ sport->port.icount.rx += count;
+
+ if (!tty) {
+ dev_err(sport->port.dev, "No tty port\n");
+ return;
+ }
+
+ dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+ copied = tty_insert_flip_string(tty,
+ ((unsigned char *)(sport->dma_rx_buf_virt)), count);
+
+ if (copied != count) {
+ WARN_ON(1);
+ dev_err(sport->port.dev, "RxData copy to tty layer failed\n");
+ }
+
+ dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+}
+
+static void lpuart_pio_tx(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ while (!uart_circ_empty(xmit) &&
+ readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) {
+ writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ dma_addr_t tx_bus_addr;
+
+ dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ sport->dma_tx_bytes = count & ~(DMA_MAXBURST_MASK);
+ tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail;
+ sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan,
+ tx_bus_addr, sport->dma_tx_bytes,
+ DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+
+ if (!sport->dma_tx_desc) {
+ dev_err(sport->port.dev, "Not able to get desc for tx\n");
+ return -EIO;
+ }
+
+ sport->dma_tx_desc->callback = lpuart_dma_tx_complete;
+ sport->dma_tx_desc->callback_param = sport;
+ sport->dma_tx_in_progress = 1;
+ sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
+ dma_async_issue_pending(sport->dma_tx_chan);
+
+ return 0;
+}
+
+static void lpuart_prepare_tx(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long count = CIRC_CNT_TO_END(xmit->head,
+ xmit->tail, UART_XMIT_SIZE);
+
+ if (!count)
+ return;
+
+ if (count < DMA_MAXBURST)
+ writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+ else {
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+ lpuart_dma_tx(sport, count);
+ }
+}
+
+static void lpuart_dma_tx_complete(void *arg)
+{
+ struct lpuart_port *sport = arg;
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ async_tx_ack(sport->dma_tx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1);
+ sport->dma_tx_in_progress = 0;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ lpuart_prepare_tx(sport);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_rx(struct lpuart_port *sport)
+{
+ dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+ sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan,
+ sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE,
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+
+ if (!sport->dma_rx_desc) {
+ dev_err(sport->port.dev, "Not able to get desc for rx\n");
+ return -EIO;
+ }
+
+ sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
+ sport->dma_rx_desc->callback_param = sport;
+ sport->dma_rx_in_progress = 1;
+ sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
+ dma_async_issue_pending(sport->dma_rx_chan);
+
+ return 0;
+}
+
+static void lpuart_dma_rx_complete(void *arg)
+{
+ struct lpuart_port *sport = arg;
+ struct tty_port *port = &sport->port.state->port;
+ unsigned long flags;
+
+ async_tx_ack(sport->dma_rx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->dma_rx_in_progress = 0;
+ lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE);
+ tty_flip_buffer_push(port);
+ lpuart_dma_rx(sport);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static void lpuart_timer_func(unsigned long data)
+{
+ struct lpuart_port *sport = (struct lpuart_port *)data;
+ struct tty_port *port = &sport->port.state->port;
+ struct dma_tx_state state;
+ unsigned long flags;
+ unsigned char temp;
+ int count;
+
+ del_timer(&sport->lpuart_timer);
+ dmaengine_pause(sport->dma_rx_chan);
+ dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state);
+ dmaengine_terminate_all(sport->dma_rx_chan);
+ count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue;
+ async_tx_ack(sport->dma_rx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->dma_rx_in_progress = 0;
+ lpuart_copy_rx_to_tty(sport, port, count);
+ tty_flip_buffer_push(port);
+ temp = readb(sport->port.membase + UARTCR5);
+ writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static inline void lpuart_prepare_rx(struct lpuart_port *sport)
+{
+ unsigned long flags;
+ unsigned char temp;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ init_timer(&sport->lpuart_timer);
+ sport->lpuart_timer.function = lpuart_timer_func;
+ sport->lpuart_timer.data = (unsigned long)sport;
+ sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
+ add_timer(&sport->lpuart_timer);
+
+ lpuart_dma_rx(sport);
+ temp = readb(sport->port.membase + UARTCR5);
+ writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
@@ -172,14 +407,21 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
static void lpuart_start_tx(struct uart_port *port)
{
- struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct circ_buf *xmit = &sport->port.state->xmit;
unsigned char temp;
temp = readb(port->membase + UARTCR2);
writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
- if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
- lpuart_transmit_buffer(sport);
+ if (sport->lpuart_dma_use) {
+ if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress)
+ lpuart_prepare_tx(sport);
+ } else {
+ if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
+ lpuart_transmit_buffer(sport);
+ }
}
static irqreturn_t lpuart_txint(int irq, void *dev_id)
@@ -279,12 +521,19 @@ static irqreturn_t lpuart_int(int irq, void *dev_id)
sts = readb(sport->port.membase + UARTSR1);
- if (sts & UARTSR1_RDRF)
- lpuart_rxint(irq, dev_id);
-
+ if (sts & UARTSR1_RDRF) {
+ if (sport->lpuart_dma_use)
+ lpuart_prepare_rx(sport);
+ else
+ lpuart_rxint(irq, dev_id);
+ }
if (sts & UARTSR1_TDRE &&
- !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS))
- lpuart_txint(irq, dev_id);
+ !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) {
+ if (sport->lpuart_dma_use)
+ lpuart_pio_tx(sport);
+ else
+ lpuart_txint(irq, dev_id);
+ }
return IRQ_HANDLED;
}
@@ -366,13 +615,156 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
sport->port.membase + UARTCFIFO);
- writeb(2, sport->port.membase + UARTTWFIFO);
+ writeb(0, sport->port.membase + UARTTWFIFO);
writeb(1, sport->port.membase + UARTRWFIFO);
/* Restore cr2 */
writeb(cr2_saved, sport->port.membase + UARTCR2);
}
+static int lpuart_dma_tx_request(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_chan *tx_chan;
+ struct dma_slave_config dma_tx_sconfig;
+ dma_addr_t dma_bus;
+ unsigned char *dma_buf;
+ int ret;
+
+ tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
+
+ if (!tx_chan) {
+ dev_err(sport->port.dev, "Dma tx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ dma_bus = dma_map_single(tx_chan->device->dev,
+ sport->port.state->xmit.buf,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(tx_chan->device->dev, dma_bus)) {
+ dev_err(sport->port.dev, "dma_map_single tx failed\n");
+ dma_release_channel(tx_chan);
+ return -ENOMEM;
+ }
+
+ dma_buf = sport->port.state->xmit.buf;
+ dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
+ dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_tx_sconfig.dst_maxburst = DMA_MAXBURST;
+ dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig);
+
+ if (ret < 0) {
+ dev_err(sport->port.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ dma_release_channel(tx_chan);
+ return ret;
+ }
+
+ sport->dma_tx_chan = tx_chan;
+ sport->dma_tx_buf_virt = dma_buf;
+ sport->dma_tx_buf_bus = dma_bus;
+ sport->dma_tx_in_progress = 0;
+
+ return 0;
+}
+
+static int lpuart_dma_rx_request(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_chan *rx_chan;
+ struct dma_slave_config dma_rx_sconfig;
+ dma_addr_t dma_bus;
+ unsigned char *dma_buf;
+ int ret;
+
+ rx_chan = dma_request_slave_channel(sport->port.dev, "rx");
+
+ if (!rx_chan) {
+ dev_err(sport->port.dev, "Dma rx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ dma_buf = devm_kzalloc(sport->port.dev,
+ FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL);
+
+ if (!dma_buf) {
+ dev_err(sport->port.dev, "Dma rx alloc failed\n");
+ dma_release_channel(rx_chan);
+ return -ENOMEM;
+ }
+
+ dma_bus = dma_map_single(rx_chan->device->dev, dma_buf,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(rx_chan->device->dev, dma_bus)) {
+ dev_err(sport->port.dev, "dma_map_single rx failed\n");
+ dma_release_channel(rx_chan);
+ return -ENOMEM;
+ }
+
+ dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
+ dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_rx_sconfig.src_maxburst = 1;
+ dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(rx_chan, &dma_rx_sconfig);
+
+ if (ret < 0) {
+ dev_err(sport->port.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ dma_release_channel(rx_chan);
+ return ret;
+ }
+
+ sport->dma_rx_chan = rx_chan;
+ sport->dma_rx_buf_virt = dma_buf;
+ sport->dma_rx_buf_bus = dma_bus;
+ sport->dma_rx_in_progress = 0;
+
+ sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
+ FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
+ sport->rxfifo_size / 2;
+
+ if (sport->dma_rx_timeout < msecs_to_jiffies(20))
+ sport->dma_rx_timeout = msecs_to_jiffies(20);
+
+ return 0;
+}
+
+static void lpuart_dma_tx_free(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_chan *dma_chan;
+
+ dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ dma_chan = sport->dma_tx_chan;
+ sport->dma_tx_chan = NULL;
+ sport->dma_tx_buf_bus = 0;
+ sport->dma_tx_buf_virt = NULL;
+ dma_release_channel(dma_chan);
+}
+
+static void lpuart_dma_rx_free(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_chan *dma_chan;
+
+ dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ dma_chan = sport->dma_rx_chan;
+ sport->dma_rx_chan = NULL;
+ sport->dma_rx_buf_bus = 0;
+ sport->dma_rx_buf_virt = NULL;
+ dma_release_channel(dma_chan);
+}
+
static int lpuart_startup(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
@@ -380,6 +772,15 @@ static int lpuart_startup(struct uart_port *port)
unsigned long flags;
unsigned char temp;
+ /*whether use dma support by dma request results*/
+ if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) {
+ sport->lpuart_dma_use = false;
+ } else {
+ sport->lpuart_dma_use = true;
+ temp = readb(port->membase + UARTCR5);
+ writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5);
+ }
+
ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
DRIVER_NAME, sport);
if (ret)
@@ -414,6 +815,11 @@ static void lpuart_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
devm_free_irq(port->dev, port->irq, sport);
+
+ if (sport->lpuart_dma_use) {
+ lpuart_dma_tx_free(port);
+ lpuart_dma_rx_free(port);
+ }
}
static void
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d799140e53b6..3b6c1a2e25de 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -496,8 +496,7 @@ static void dma_tx_callback(void *data)
dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
+ uart_write_wakeup(&sport->port);
if (waitqueue_active(&sport->dma_wait)) {
wake_up(&sport->dma_wait);
@@ -1117,25 +1116,25 @@ static int imx_startup(struct uart_port *port)
*/
if (sport->txirq > 0) {
retval = request_irq(sport->rxirq, imx_rxint, 0,
- DRIVER_NAME, sport);
+ dev_name(port->dev), sport);
if (retval)
goto error_out1;
retval = request_irq(sport->txirq, imx_txint, 0,
- DRIVER_NAME, sport);
+ dev_name(port->dev), sport);
if (retval)
goto error_out2;
/* do not use RTS IRQ on IrDA */
if (!USE_IRDA(sport)) {
retval = request_irq(sport->rtsirq, imx_rtsint, 0,
- DRIVER_NAME, sport);
+ dev_name(port->dev), sport);
if (retval)
goto error_out3;
}
} else {
retval = request_irq(sport->port.irq, imx_int, 0,
- DRIVER_NAME, sport);
+ dev_name(port->dev), sport);
if (retval) {
free_irq(sport->port.irq, sport);
goto error_out1;
@@ -1470,44 +1469,13 @@ static const char *imx_type(struct uart_port *port)
}
/*
- * Release the memory region(s) being used by 'port'.
- */
-static void imx_release_port(struct uart_port *port)
-{
- struct platform_device *pdev = to_platform_device(port->dev);
- struct resource *mmres;
-
- mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mmres->start, resource_size(mmres));
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int imx_request_port(struct uart_port *port)
-{
- struct platform_device *pdev = to_platform_device(port->dev);
- struct resource *mmres;
- void *ret;
-
- mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mmres)
- return -ENODEV;
-
- ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
-
- return ret ? 0 : -EBUSY;
-}
-
-/*
* Configure/autoconfigure the port.
*/
static void imx_config_port(struct uart_port *port, int flags)
{
struct imx_port *sport = (struct imx_port *)port;
- if (flags & UART_CONFIG_TYPE &&
- imx_request_port(&sport->port) == 0)
+ if (flags & UART_CONFIG_TYPE)
sport->port.type = PORT_IMX;
}
@@ -1617,8 +1585,6 @@ static struct uart_ops imx_pops = {
.flush_buffer = imx_flush_buffer,
.set_termios = imx_set_termios,
.type = imx_type,
- .release_port = imx_release_port,
- .request_port = imx_request_port,
.config_port = imx_config_port,
.verify_port = imx_verify_port,
#if defined(CONFIG_CONSOLE_POLL)
@@ -1935,7 +1901,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport,
static int serial_imx_probe(struct platform_device *pdev)
{
struct imx_port *sport;
- struct imxuart_platform_data *pdata;
void __iomem *base;
int ret = 0;
struct resource *res;
@@ -1951,12 +1916,9 @@ static int serial_imx_probe(struct platform_device *pdev)
return ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- base = devm_ioremap(&pdev->dev, res->start, PAGE_SIZE);
- if (!base)
- return -ENOMEM;
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
sport->port.dev = &pdev->dev;
sport->port.mapbase = res->start;
@@ -1992,38 +1954,16 @@ static int serial_imx_probe(struct platform_device *pdev)
imx_ports[sport->port.line] = sport;
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata && pdata->init) {
- ret = pdata->init(pdev);
- if (ret)
- return ret;
- }
-
- ret = uart_add_one_port(&imx_reg, &sport->port);
- if (ret)
- goto deinit;
platform_set_drvdata(pdev, sport);
- return 0;
-deinit:
- if (pdata && pdata->exit)
- pdata->exit(pdev);
- return ret;
+ return uart_add_one_port(&imx_reg, &sport->port);
}
static int serial_imx_remove(struct platform_device *pdev)
{
- struct imxuart_platform_data *pdata;
struct imx_port *sport = platform_get_drvdata(pdev);
- pdata = dev_get_platdata(&pdev->dev);
-
- uart_remove_one_port(&imx_reg, &sport->port);
-
- if (pdata && pdata->exit)
- pdata->exit(pdev);
-
- return 0;
+ return uart_remove_one_port(&imx_reg, &sport->port);
}
static struct platform_driver serial_imx_driver = {
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8d71e4047bb3..2a99d0c61b9e 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1,7 +1,7 @@
/*
* Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver
*
- * Copyright (C) 2012-2013 Alexander Shiyan <shc_work@mail.ru>
+ * Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru>
*
* Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
* Based on max3110.c, by Feng Tang <feng.tang@intel.com>
@@ -13,19 +13,21 @@
* (at your option) any later version.
*/
-#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/regmap.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
-
-#include <linux/platform_data/max310x.h>
+#include <linux/uaccess.h>
#define MAX310X_NAME "max310x"
#define MAX310X_MAJOR 204
@@ -161,10 +163,6 @@
/* IRDA register bits */
#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
-#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
-#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
-#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
-#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
/* Flow control trigger level register masks */
#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
@@ -220,26 +218,6 @@
* XOFF2
*/
-/* GPIO configuration register bits */
-#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
-#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
-#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
-#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
-#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
-#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
-#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
-#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
-
-/* GPIO DATA register bits */
-#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
-#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
-#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
-#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
-#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
-#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
-#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
-#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
-
/* PLL configuration register masks */
#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */
#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */
@@ -283,16 +261,15 @@ struct max310x_devtype {
struct max310x_one {
struct uart_port port;
struct work_struct tx_work;
+ struct work_struct md_work;
};
struct max310x_port {
struct uart_driver uart;
struct max310x_devtype *devtype;
struct regmap *regmap;
- struct regmap_config regcfg;
struct mutex mutex;
- struct max310x_pdata *pdata;
- int gpio_used;
+ struct clk *clk;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio;
#endif
@@ -504,25 +481,33 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
return false;
}
-static void max310x_set_baud(struct uart_port *port, int baud)
+static int max310x_set_baud(struct uart_port *port, int baud)
{
- unsigned int mode = 0, div = port->uartclk / baud;
+ unsigned int mode = 0, clk = port->uartclk, div = clk / baud;
- if (!(div / 16)) {
+ /* Check for minimal value for divider */
+ if (div < 16)
+ div = 16;
+
+ if (clk % baud && (div / 16) < 0x8000) {
/* Mode x2 */
mode = MAX310X_BRGCFG_2XMODE_BIT;
- div = (port->uartclk * 2) / baud;
- }
-
- if (!(div / 16)) {
- /* Mode x4 */
- mode = MAX310X_BRGCFG_4XMODE_BIT;
- div = (port->uartclk * 4) / baud;
+ clk = port->uartclk * 2;
+ div = clk / baud;
+
+ if (clk % baud && (div / 16) < 0x8000) {
+ /* Mode x4 */
+ mode = MAX310X_BRGCFG_4XMODE_BIT;
+ clk = port->uartclk * 4;
+ div = clk / baud;
+ }
}
max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8);
max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16);
max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode);
+
+ return DIV_ROUND_CLOSEST(clk, div);
}
static int max310x_update_best_err(unsigned long f, long *besterr)
@@ -538,18 +523,19 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
return 1;
}
-static int max310x_set_ref_clk(struct max310x_port *s)
+static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
+ bool xtal)
{
unsigned int div, clksrc, pllcfg = 0;
long besterr = -1;
- unsigned long fdiv, fmul, bestfreq = s->pdata->frequency;
+ unsigned long fdiv, fmul, bestfreq = freq;
/* First, update error without PLL */
- max310x_update_best_err(s->pdata->frequency, &besterr);
+ max310x_update_best_err(freq, &besterr);
/* Try all possible PLL dividers */
for (div = 1; (div <= 63) && besterr; div++) {
- fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div);
+ fdiv = DIV_ROUND_CLOSEST(freq, div);
/* Try multiplier 6 */
fmul = fdiv * 6;
@@ -582,10 +568,7 @@ static int max310x_set_ref_clk(struct max310x_port *s)
}
/* Configure clock source */
- if (s->pdata->driver_flags & MAX310X_EXT_CLK)
- clksrc = MAX310X_CLKSRC_EXTCLK_BIT;
- else
- clksrc = MAX310X_CLKSRC_CRYST_BIT;
+ clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
/* Configure PLL */
if (pllcfg) {
@@ -597,7 +580,7 @@ static int max310x_set_ref_clk(struct max310x_port *s)
regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
/* Wait for crystal */
- if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK))
+ if (pllcfg && xtal)
msleep(10);
return (int)bestfreq;
@@ -782,11 +765,21 @@ static unsigned int max310x_get_mctrl(struct uart_port *port)
return TIOCM_DSR | TIOCM_CAR;
}
+static void max310x_md_proc(struct work_struct *ws)
+{
+ struct max310x_one *one = container_of(ws, struct max310x_one, md_work);
+
+ max310x_port_update(&one->port, MAX310X_MODE2_REG,
+ MAX310X_MODE2_LOOPBACK_BIT,
+ (one->port.mctrl & TIOCM_LOOP) ?
+ MAX310X_MODE2_LOOPBACK_BIT : 0);
+}
+
static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
- * so do nothing
- */
+ struct max310x_one *one = container_of(port, struct max310x_one, port);
+
+ schedule_work(&one->md_work);
}
static void max310x_break_ctl(struct uart_port *port, int break_state)
@@ -875,40 +868,76 @@ static void max310x_set_termios(struct uart_port *port,
port->uartclk / 4);
/* Setup baudrate generator */
- max310x_set_baud(port, baud);
+ baud = max310x_set_baud(port, baud);
/* Update timeout according to new baud rate */
uart_update_timeout(port, termios->c_cflag, baud);
}
+static int max310x_ioctl(struct uart_port *port, unsigned int cmd,
+ unsigned long arg)
+{
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+ struct serial_rs485 rs485;
+ unsigned int val;
+
+ switch (cmd) {
+ case TIOCSRS485:
+ if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
+ return -EFAULT;
+ if (rs485.delay_rts_before_send > 0x0f ||
+ rs485.delay_rts_after_send > 0x0f)
+ return -ERANGE;
+ val = (rs485.delay_rts_before_send << 4) |
+ rs485.delay_rts_after_send;
+ max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val);
+ if (rs485.flags & SER_RS485_ENABLED) {
+ max310x_port_update(port, MAX310X_MODE1_REG,
+ MAX310X_MODE1_TRNSCVCTRL_BIT,
+ MAX310X_MODE1_TRNSCVCTRL_BIT);
+ max310x_port_update(port, MAX310X_MODE2_REG,
+ MAX310X_MODE2_ECHOSUPR_BIT,
+ MAX310X_MODE2_ECHOSUPR_BIT);
+ } else {
+ max310x_port_update(port, MAX310X_MODE1_REG,
+ MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
+ max310x_port_update(port, MAX310X_MODE2_REG,
+ MAX310X_MODE2_ECHOSUPR_BIT, 0);
+ }
+ return 0;
+ case TIOCGRS485:
+ memset(&rs485, 0, sizeof(rs485));
+ val = max310x_port_read(port, MAX310X_MODE1_REG);
+ rs485.flags = (val & MAX310X_MODE1_TRNSCVCTRL_BIT) ?
+ SER_RS485_ENABLED : 0;
+ rs485.flags |= SER_RS485_RTS_ON_SEND;
+ val = max310x_port_read(port, MAX310X_HDPIXDELAY_REG);
+ rs485.delay_rts_before_send = val >> 4;
+ rs485.delay_rts_after_send = val & 0x0f;
+ if (copy_to_user((void __user *)arg, &rs485, sizeof(rs485)))
+ return -EFAULT;
+ return 0;
+ default:
+ break;
+ }
+#endif
+
+ return -ENOIOCTLCMD;
+}
+
static int max310x_startup(struct uart_port *port)
{
- unsigned int val, line = port->line;
struct max310x_port *s = dev_get_drvdata(port->dev);
+ unsigned int val;
s->devtype->power(port, 1);
- /* Configure baud rate, 9600 as default */
- max310x_set_baud(port, 9600);
-
- /* Configure LCR register, 8N1 mode by default */
- max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8);
-
/* Configure MODE1 register */
max310x_port_update(port, MAX310X_MODE1_REG,
- MAX310X_MODE1_TRNSCVCTRL_BIT,
- (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL)
- ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0);
-
- /* Configure MODE2 register */
- val = MAX310X_MODE2_RXEMPTINV_BIT;
- if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK)
- val |= MAX310X_MODE2_LOOPBACK_BIT;
- if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS)
- val |= MAX310X_MODE2_ECHOSUPR_BIT;
-
- /* Reset FIFOs */
- val |= MAX310X_MODE2_FIFORST_BIT;
+ MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
+
+ /* Configure MODE2 register & Reset FIFOs*/
+ val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
max310x_port_write(port, MAX310X_MODE2_REG, val);
max310x_port_update(port, MAX310X_MODE2_REG,
MAX310X_MODE2_FIFORST_BIT, 0);
@@ -989,6 +1018,7 @@ static const struct uart_ops max310x_ops = {
.release_port = max310x_null_void,
.config_port = max310x_config_port,
.verify_port = max310x_verify_port,
+ .ioctl = max310x_ioctl,
};
static int __maybe_unused max310x_suspend(struct device *dev)
@@ -1017,6 +1047,8 @@ static int __maybe_unused max310x_resume(struct device *dev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
+
#ifdef CONFIG_GPIOLIB
static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
{
@@ -1063,23 +1095,16 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip,
}
#endif
-static int max310x_probe(struct device *dev, int is_spi,
- struct max310x_devtype *devtype, int irq)
+static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
+ struct regmap *regmap, int irq, unsigned long flags)
{
+ int i, ret, fmin, fmax, freq, uartclk;
+ struct clk *clk_osc, *clk_xtal;
struct max310x_port *s;
- struct max310x_pdata *pdata = dev_get_platdata(dev);
- int i, ret, uartclk;
-
- /* Check for IRQ */
- if (irq <= 0) {
- dev_err(dev, "No IRQ specified\n");
- return -ENOTSUPP;
- }
+ bool xtal = false;
- if (!pdata) {
- dev_err(dev, "No platform data supplied\n");
- return -EINVAL;
- }
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
/* Alloc port structure */
s = devm_kzalloc(dev, sizeof(*s) +
@@ -1089,52 +1114,44 @@ static int max310x_probe(struct device *dev, int is_spi,
return -ENOMEM;
}
- /* Check input frequency */
- if ((pdata->driver_flags & MAX310X_EXT_CLK) &&
- ((pdata->frequency < 500000) || (pdata->frequency > 35000000)))
- goto err_freq;
- /* Check frequency for quartz */
- if (!(pdata->driver_flags & MAX310X_EXT_CLK) &&
- ((pdata->frequency < 1000000) || (pdata->frequency > 4000000)))
- goto err_freq;
-
- s->pdata = pdata;
- s->devtype = devtype;
- dev_set_drvdata(dev, s);
-
- mutex_init(&s->mutex);
+ clk_osc = devm_clk_get(dev, "osc");
+ clk_xtal = devm_clk_get(dev, "xtal");
+ if (!IS_ERR(clk_osc)) {
+ s->clk = clk_osc;
+ fmin = 500000;
+ fmax = 35000000;
+ } else if (!IS_ERR(clk_xtal)) {
+ s->clk = clk_xtal;
+ fmin = 1000000;
+ fmax = 4000000;
+ xtal = true;
+ } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER ||
+ PTR_ERR(clk_xtal) == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else {
+ dev_err(dev, "Cannot get clock\n");
+ return -EINVAL;
+ }
- /* Setup regmap */
- s->regcfg.reg_bits = 8;
- s->regcfg.val_bits = 8;
- s->regcfg.read_flag_mask = 0x00;
- s->regcfg.write_flag_mask = 0x80;
- s->regcfg.cache_type = REGCACHE_RBTREE;
- s->regcfg.writeable_reg = max310x_reg_writeable;
- s->regcfg.volatile_reg = max310x_reg_volatile;
- s->regcfg.precious_reg = max310x_reg_precious;
- s->regcfg.max_register = devtype->nr * 0x20 - 1;
-
- if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) {
- struct spi_device *spi = to_spi_device(dev);
-
- s->regmap = devm_regmap_init_spi(spi, &s->regcfg);
- } else
- return -ENOTSUPP;
+ ret = clk_prepare_enable(s->clk);
+ if (ret)
+ return ret;
- if (IS_ERR(s->regmap)) {
- dev_err(dev, "Failed to initialize register map\n");
- return PTR_ERR(s->regmap);
+ freq = clk_get_rate(s->clk);
+ /* Check frequency limits */
+ if (freq < fmin || freq > fmax) {
+ ret = -ERANGE;
+ goto out_clk;
}
- /* Board specific configure */
- if (s->pdata->init)
- s->pdata->init();
+ s->regmap = regmap;
+ s->devtype = devtype;
+ dev_set_drvdata(dev, s);
/* Check device to ensure we are talking to what we expect */
ret = devtype->detect(dev);
if (ret)
- return ret;
+ goto out_clk;
for (i = 0; i < devtype->nr; i++) {
unsigned int offs = i << 5;
@@ -1156,7 +1173,7 @@ static int max310x_probe(struct device *dev, int is_spi,
MAX310X_MODE1_AUTOSLEEP_BIT);
}
- uartclk = max310x_set_ref_clk(s);
+ uartclk = max310x_set_ref_clk(s, freq, xtal);
dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
/* Register UART driver */
@@ -1168,9 +1185,28 @@ static int max310x_probe(struct device *dev, int is_spi,
ret = uart_register_driver(&s->uart);
if (ret) {
dev_err(dev, "Registering UART driver failed\n");
- return ret;
+ goto out_clk;
}
+#ifdef CONFIG_GPIOLIB
+ /* Setup GPIO cotroller */
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.dev = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = max310x_gpio_direction_input;
+ s->gpio.get = max310x_gpio_get;
+ s->gpio.direction_output= max310x_gpio_direction_output;
+ s->gpio.set = max310x_gpio_set;
+ s->gpio.base = -1;
+ s->gpio.ngpio = devtype->nr * 4;
+ s->gpio.can_sleep = 1;
+ ret = gpiochip_add(&s->gpio);
+ if (ret)
+ goto out_uart;
+#endif
+
+ mutex_init(&s->mutex);
+
for (i = 0; i < devtype->nr; i++) {
/* Initialize port data */
s->p[i].port.line = i;
@@ -1178,8 +1214,7 @@ static int max310x_probe(struct device *dev, int is_spi,
s->p[i].port.irq = irq;
s->p[i].port.type = PORT_MAX310X;
s->p[i].port.fifosize = MAX310X_FIFO_SIZE;
- s->p[i].port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE |
- UPF_LOW_LATENCY;
+ s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY;
s->p[i].port.iotype = UPIO_PORT;
s->p[i].port.iobase = i * 0x20;
s->p[i].port.membase = (void __iomem *)~0;
@@ -1195,48 +1230,35 @@ static int max310x_probe(struct device *dev, int is_spi,
MAX310X_MODE1_IRQSEL_BIT);
/* Initialize queue for start TX */
INIT_WORK(&s->p[i].tx_work, max310x_wq_proc);
+ /* Initialize queue for changing mode */
+ INIT_WORK(&s->p[i].md_work, max310x_md_proc);
/* Register port */
uart_add_one_port(&s->uart, &s->p[i].port);
/* Go to suspend mode */
devtype->power(&s->p[i].port, 0);
}
-#ifdef CONFIG_GPIOLIB
- /* Setup GPIO cotroller */
- if (s->pdata->gpio_base) {
- s->gpio.owner = THIS_MODULE;
- s->gpio.dev = dev;
- s->gpio.label = dev_name(dev);
- s->gpio.direction_input = max310x_gpio_direction_input;
- s->gpio.get = max310x_gpio_get;
- s->gpio.direction_output= max310x_gpio_direction_output;
- s->gpio.set = max310x_gpio_set;
- s->gpio.base = s->pdata->gpio_base;
- s->gpio.ngpio = devtype->nr * 4;
- s->gpio.can_sleep = 1;
- if (!gpiochip_add(&s->gpio))
- s->gpio_used = 1;
- } else
- dev_info(dev, "GPIO support not enabled\n");
-#endif
-
/* Setup interrupt */
ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- dev_name(dev), s);
- if (ret) {
- dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+ IRQF_ONESHOT | flags, dev_name(dev), s);
+ if (!ret)
+ return 0;
+
+ dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+
+ mutex_destroy(&s->mutex);
+
#ifdef CONFIG_GPIOLIB
- if (s->gpio_used)
- WARN_ON(gpiochip_remove(&s->gpio));
+ WARN_ON(gpiochip_remove(&s->gpio));
+
+out_uart:
#endif
- }
+ uart_unregister_driver(&s->uart);
- return ret;
+out_clk:
+ clk_disable_unprepare(s->clk);
-err_freq:
- dev_err(dev, "Frequency parameter incorrect\n");
- return -EINVAL;
+ return ret;
}
static int max310x_remove(struct device *dev)
@@ -1244,30 +1266,51 @@ static int max310x_remove(struct device *dev)
struct max310x_port *s = dev_get_drvdata(dev);
int i, ret = 0;
+#ifdef CONFIG_GPIOLIB
+ ret = gpiochip_remove(&s->gpio);
+ if (ret)
+ return ret;
+#endif
+
for (i = 0; i < s->uart.nr; i++) {
cancel_work_sync(&s->p[i].tx_work);
+ cancel_work_sync(&s->p[i].md_work);
uart_remove_one_port(&s->uart, &s->p[i].port);
s->devtype->power(&s->p[i].port, 0);
}
+ mutex_destroy(&s->mutex);
uart_unregister_driver(&s->uart);
-
-#ifdef CONFIG_GPIOLIB
- if (s->gpio_used)
- ret = gpiochip_remove(&s->gpio);
-#endif
-
- if (s->pdata->exit)
- s->pdata->exit();
+ clk_disable_unprepare(s->clk);
return ret;
}
+static const struct of_device_id __maybe_unused max310x_dt_ids[] = {
+ { .compatible = "maxim,max3107", .data = &max3107_devtype, },
+ { .compatible = "maxim,max3108", .data = &max3108_devtype, },
+ { .compatible = "maxim,max3109", .data = &max3109_devtype, },
+ { .compatible = "maxim,max14830", .data = &max14830_devtype },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max310x_dt_ids);
+
+static struct regmap_config regcfg = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .write_flag_mask = 0x80,
+ .cache_type = REGCACHE_RBTREE,
+ .writeable_reg = max310x_reg_writeable,
+ .volatile_reg = max310x_reg_volatile,
+ .precious_reg = max310x_reg_precious,
+};
+
#ifdef CONFIG_SPI_MASTER
static int max310x_spi_probe(struct spi_device *spi)
{
- struct max310x_devtype *devtype =
- (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
+ struct max310x_devtype *devtype;
+ unsigned long flags = 0;
+ struct regmap *regmap;
int ret;
/* Setup SPI bus */
@@ -1275,12 +1318,25 @@ static int max310x_spi_probe(struct spi_device *spi)
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 26000000;
ret = spi_setup(spi);
- if (ret) {
- dev_err(&spi->dev, "SPI setup failed\n");
+ if (ret)
return ret;
+
+ if (spi->dev.of_node) {
+ const struct of_device_id *of_id =
+ of_match_device(max310x_dt_ids, &spi->dev);
+
+ devtype = (struct max310x_devtype *)of_id->data;
+ } else {
+ const struct spi_device_id *id_entry = spi_get_device_id(spi);
+
+ devtype = (struct max310x_devtype *)id_entry->driver_data;
+ flags = IRQF_TRIGGER_FALLING;
}
- return max310x_probe(&spi->dev, 1, devtype, spi->irq);
+ regcfg.max_register = devtype->nr * 0x20 - 1;
+ regmap = devm_regmap_init_spi(spi, &regcfg);
+
+ return max310x_probe(&spi->dev, devtype, regmap, spi->irq, flags);
}
static int max310x_spi_remove(struct spi_device *spi)
@@ -1288,8 +1344,6 @@ static int max310x_spi_remove(struct spi_device *spi)
return max310x_remove(&spi->dev);
}
-static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
-
static const struct spi_device_id max310x_id_table[] = {
{ "max3107", (kernel_ulong_t)&max3107_devtype, },
{ "max3108", (kernel_ulong_t)&max3108_devtype, },
@@ -1301,9 +1355,10 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
static struct spi_driver max310x_uart_driver = {
.driver = {
- .name = MAX310X_NAME,
- .owner = THIS_MODULE,
- .pm = &max310x_pm_ops,
+ .name = MAX310X_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(max310x_dt_ids),
+ .pm = &max310x_pm_ops,
},
.probe = max310x_spi_probe,
.remove = max310x_spi_remove,
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b5d779cd3c2b..053b98eb46c8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -39,6 +39,13 @@
#include "msm_serial.h"
+enum {
+ UARTDM_1P1 = 1,
+ UARTDM_1P2,
+ UARTDM_1P3,
+ UARTDM_1P4,
+};
+
struct msm_port {
struct uart_port uart;
char name[16];
@@ -309,6 +316,8 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
static void msm_reset(struct uart_port *port)
{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
/* reset everything */
msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
@@ -316,6 +325,10 @@ static void msm_reset(struct uart_port *port)
msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+
+ /* Disable DM modes */
+ if (msm_port->is_uartdm)
+ msm_write(port, 0, UARTDM_DMEN);
}
static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -711,6 +724,117 @@ static void msm_power(struct uart_port *port, unsigned int state,
}
}
+#ifdef CONFIG_CONSOLE_POLL
+static int msm_poll_init(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* Enable single character mode on RX FIFO */
+ if (msm_port->is_uartdm >= UARTDM_1P4)
+ msm_write(port, UARTDM_DMEN_RX_SC_ENABLE, UARTDM_DMEN);
+
+ return 0;
+}
+
+static int msm_poll_get_char_single(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+
+ if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+ return NO_POLL_CHAR;
+ else
+ return msm_read(port, rf_reg) & 0xff;
+}
+
+static int msm_poll_get_char_dm_1p3(struct uart_port *port)
+{
+ int c;
+ static u32 slop;
+ static int count;
+ unsigned char *sp = (unsigned char *)&slop;
+
+ /* Check if a previous read had more than one char */
+ if (count) {
+ c = sp[sizeof(slop) - count];
+ count--;
+ /* Or if FIFO is empty */
+ } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+ /*
+ * If RX packing buffer has less than a word, force stale to
+ * push contents into RX FIFO
+ */
+ count = msm_read(port, UARTDM_RXFS);
+ count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
+ if (count) {
+ msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+ slop = msm_read(port, UARTDM_RF);
+ c = sp[0];
+ count--;
+ } else {
+ c = NO_POLL_CHAR;
+ }
+ /* FIFO has a word */
+ } else {
+ slop = msm_read(port, UARTDM_RF);
+ c = sp[0];
+ count = sizeof(slop) - 1;
+ }
+
+ return c;
+}
+
+static int msm_poll_get_char(struct uart_port *port)
+{
+ u32 imr;
+ int c;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* Disable all interrupts */
+ imr = msm_read(port, UART_IMR);
+ msm_write(port, 0, UART_IMR);
+
+ if (msm_port->is_uartdm == UARTDM_1P3)
+ c = msm_poll_get_char_dm_1p3(port);
+ else
+ c = msm_poll_get_char_single(port);
+
+ /* Enable interrupts */
+ msm_write(port, imr, UART_IMR);
+
+ return c;
+}
+
+static void msm_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ u32 imr;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* Disable all interrupts */
+ imr = msm_read(port, UART_IMR);
+ msm_write(port, 0, UART_IMR);
+
+ if (msm_port->is_uartdm)
+ reset_dm_count(port, 1);
+
+ /* Wait until FIFO is empty */
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ cpu_relax();
+
+ /* Write a character */
+ msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+
+ /* Wait until FIFO is empty */
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ cpu_relax();
+
+ /* Enable interrupts */
+ msm_write(port, imr, UART_IMR);
+
+ return;
+}
+#endif
+
static struct uart_ops msm_uart_pops = {
.tx_empty = msm_tx_empty,
.set_mctrl = msm_set_mctrl,
@@ -729,6 +853,11 @@ static struct uart_ops msm_uart_pops = {
.config_port = msm_config_port,
.verify_port = msm_verify_port,
.pm = msm_power,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = msm_poll_init,
+ .poll_get_char = msm_poll_get_char,
+ .poll_put_char = msm_poll_put_char,
+#endif
};
static struct msm_port msm_uart_ports[] = {
@@ -900,7 +1029,10 @@ static struct uart_driver msm_uart_driver = {
static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
static const struct of_device_id msm_uartdm_table[] = {
- { .compatible = "qcom,msm-uartdm" },
+ { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
+ { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
+ { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
+ { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
{ }
};
@@ -909,6 +1041,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
struct msm_port *msm_port;
struct resource *resource;
struct uart_port *port;
+ const struct of_device_id *id;
int irq;
if (pdev->id == -1)
@@ -923,8 +1056,9 @@ static int __init msm_serial_probe(struct platform_device *pdev)
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
- if (of_match_device(msm_uartdm_table, &pdev->dev))
- msm_port->is_uartdm = 1;
+ id = of_match_device(msm_uartdm_table, &pdev->dev);
+ if (id)
+ msm_port->is_uartdm = (unsigned long)id->data;
else
msm_port->is_uartdm = 0;
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 469fda50ac63..1e9b68b6f9eb 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -59,6 +59,7 @@
#define UART_CR_CMD_RESET_RFR (14 << 4)
#define UART_CR_CMD_PROTECTION_EN (16 << 4)
#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
+#define UART_CR_CMD_FORCE_STALE (4 << 8)
#define UART_CR_CMD_RESET_TX_READY (3 << 8)
#define UART_CR_TX_DISABLE (1 << 3)
#define UART_CR_TX_ENABLE (1 << 2)
@@ -113,6 +114,14 @@
#define GSBI_PROTOCOL_UART 0x40
#define GSBI_PROTOCOL_IDLE 0x0
+#define UARTDM_RXFS 0x50
+#define UARTDM_RXFS_BUF_SHIFT 0x7
+#define UARTDM_RXFS_BUF_MASK 0x7
+
+#define UARTDM_DMEN 0x3C
+#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
+#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
+
#define UARTDM_DMRX 0x34
#define UARTDM_NCF_TX 0x40
#define UARTDM_RX_TOTAL_SNAP 0x38
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 77f035158d6c..dd8b1a5458ff 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -342,7 +342,14 @@ static void serial_omap_stop_tx(struct uart_port *port)
if ((up->rs485.flags & SER_RS485_ENABLED) &&
!(up->rs485.flags & SER_RS485_RX_DURING_TX)) {
- up->ier = UART_IER_RLSI | UART_IER_RDI;
+ /*
+ * Empty the RX FIFO, we are not interested in anything
+ * received during the half-duplex transmission.
+ */
+ serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR);
+ /* Re-enable RX interrupts */
+ up->ier |= UART_IER_RLSI | UART_IER_RDI;
+ up->port.read_status_mask |= UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
}
@@ -355,7 +362,7 @@ static void serial_omap_stop_rx(struct uart_port *port)
struct uart_omap_port *up = to_uart_omap_port(port);
pm_runtime_get_sync(up->dev);
- up->ier &= ~UART_IER_RLSI;
+ up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
pm_runtime_mark_last_busy(up->dev);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 8fa1134e0051..0931b3fe9edf 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1762,7 +1762,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
int fifosize;
int port_type;
struct pch_uart_driver_data *board;
+#ifdef CONFIG_DEBUG_FS
char name[32]; /* for debugfs file name */
+#endif
board = &drv_dat[id->driver_data];
port_type = board->port_type;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 9cd706df3b33..23f459600738 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1282,6 +1282,14 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
if (ret < 0)
goto probe_err;
+ if (!s3c24xx_uart_drv.state) {
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ pr_err("Failed to register Samsung UART driver\n");
+ return ret;
+ }
+ }
+
dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
platform_set_drvdata(pdev, &ourport->port);
@@ -1321,6 +1329,8 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
+ uart_unregister_driver(&s3c24xx_uart_drv);
+
return 0;
}
@@ -1820,35 +1830,7 @@ static struct platform_driver samsung_serial_driver = {
},
};
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- pr_err("Failed to register Samsung UART driver\n");
- return ret;
- }
-
- ret = platform_driver_register(&samsung_serial_driver);
- if (ret < 0) {
- pr_err("Failed to register platform driver\n");
- uart_unregister_driver(&s3c24xx_uart_drv);
- }
-
- return ret;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- platform_driver_unregister(&samsung_serial_driver);
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
+module_platform_driver(samsung_serial_driver);
MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ece2049bd270..2cf5649a6dc0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1319,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
uport = state->uart_port;
port = &state->port;
- pr_debug("uart_close(%d) called\n", uport->line);
+ pr_debug("uart_close(%d) called\n", uport ? uport->line : -1);
- if (tty_port_close_start(port, tty, filp) == 0)
+ if (!port->count || tty_port_close_start(port, tty, filp) == 0)
return;
/*
@@ -1762,7 +1762,7 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
}
/**
- * uart_parse_options - Parse serial port baud/parity/bits/flow contro.
+ * uart_parse_options - Parse serial port baud/parity/bits/flow control.
* @options: pointer to option string
* @baud: pointer to an 'int' variable for the baud rate.
* @parity: pointer to an 'int' variable for the parity.
@@ -2609,7 +2609,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Register the port whether it's detected or not. This allows
- * setserial to be used to alter this ports parameters.
+ * setserial to be used to alter this port's parameters.
*/
tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
uport->line, uport->dev, port, tty_dev_attr_groups);
@@ -2645,6 +2645,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
{
struct uart_state *state = drv->state + uport->line;
struct tty_port *port = &state->port;
+ struct tty_struct *tty;
int ret = 0;
BUG_ON(in_interrupt());
@@ -2673,8 +2674,17 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
*/
tty_unregister_device(drv->tty_driver, uport->line);
- if (port->tty)
+ tty = tty_port_tty_get(port);
+ if (tty) {
tty_vhangup(port->tty);
+ tty_kref_put(tty);
+ }
+
+ /*
+ * If the port is used as a console, unregister it
+ */
+ if (uart_console(uport))
+ unregister_console(uport->cons);
/*
* Free the port IO and memory resources, if any.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7e0b62602632..88236da0ddf7 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -428,7 +428,7 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
cfg->regtype = SCIx_HSCIF_REGTYPE;
break;
default:
- printk(KERN_ERR "Can't probe register map for given port\n");
+ pr_err("Can't probe register map for given port\n");
return -EINVAL;
}
@@ -788,7 +788,7 @@ static int sci_handle_errors(struct uart_port *port)
if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
copied++;
- dev_notice(port->dev, "overrun error");
+ dev_notice(port->dev, "overrun error\n");
}
if (status & SCxSR_FER(port)) {
@@ -830,7 +830,7 @@ static int sci_handle_errors(struct uart_port *port)
if (tty_insert_flip_char(tport, 0, TTY_PARITY))
copied++;
- dev_notice(port->dev, "parity error");
+ dev_notice(port->dev, "parity error\n");
}
if (copied)
@@ -911,7 +911,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
/* Disable future Rx interrupts */
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
- scr |= 0x4000;
+ scr |= SCSCR_RDRQE;
} else {
scr &= ~SCSCR_RIE;
}
@@ -1199,7 +1199,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
*/
reg = sci_getreg(port, SCFCR);
if (reg->size)
- serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) |
+ SCFCR_LOOP);
}
}
@@ -1289,7 +1291,8 @@ static void sci_dma_rx_complete(void *arg)
unsigned long flags;
int count;
- dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
+ dev_dbg(port->dev, "%s(%d) active #%d\n",
+ __func__, port->line, s->active_rx);
spin_lock_irqsave(&port->lock, flags);
@@ -1365,8 +1368,8 @@ static void sci_submit_rx(struct sci_port *s)
sci_rx_dma_release(s, true);
return;
}
- dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
- s->cookie_rx[i], i);
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
+ __func__, s->cookie_rx[i], i);
}
s->active_rx = s->cookie_rx[0];
@@ -1425,8 +1428,8 @@ static void work_fn_rx(struct work_struct *work)
s->active_rx = s->cookie_rx[!new];
- dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
- s->cookie_rx[new], new, s->active_rx);
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
+ __func__, s->cookie_rx[new], new, s->active_rx);
}
static void work_fn_tx(struct work_struct *work)
@@ -1479,8 +1482,8 @@ static void work_fn_tx(struct work_struct *work)
return;
}
- dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
- xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
dma_async_issue_pending(chan);
}
@@ -1495,9 +1498,9 @@ static void sci_start_tx(struct uart_port *port)
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = serial_port_in(port, SCSCR);
if (s->chan_tx)
- new = scr | 0x8000;
+ new = scr | SCSCR_TDRQE;
else
- new = scr & ~0x8000;
+ new = scr & ~SCSCR_TDRQE;
if (new != scr)
serial_port_out(port, SCSCR, new);
}
@@ -1524,7 +1527,7 @@ static void sci_stop_tx(struct uart_port *port)
ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~0x8000;
+ ctrl &= ~SCSCR_TDRQE;
ctrl &= ~SCSCR_TIE;
@@ -1538,7 +1541,7 @@ static void sci_start_rx(struct uart_port *port)
ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~0x4000;
+ ctrl &= ~SCSCR_RDRQE;
serial_port_out(port, SCSCR, ctrl);
}
@@ -1550,7 +1553,7 @@ static void sci_stop_rx(struct uart_port *port)
ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~0x4000;
+ ctrl &= ~SCSCR_RDRQE;
ctrl &= ~port_rx_irq_mask(port);
@@ -1599,8 +1602,8 @@ static bool filter(struct dma_chan *chan, void *slave)
{
struct sh_dmae_slave *param = slave;
- dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
- param->shdma_slave.slave_id);
+ dev_dbg(chan->device->dev, "%s: slave ID %d\n",
+ __func__, param->shdma_slave.slave_id);
chan->private = &param->shdma_slave;
return true;
@@ -1613,7 +1616,7 @@ static void rx_timer_fn(unsigned long arg)
u16 scr = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- scr &= ~0x4000;
+ scr &= ~SCSCR_RDRQE;
enable_irq(s->irqs[SCIx_RXI_IRQ]);
}
serial_port_out(port, SCSCR, scr | SCSCR_RIE);
@@ -1629,8 +1632,7 @@ static void sci_request_dma(struct uart_port *port)
dma_cap_mask_t mask;
int nent;
- dev_dbg(port->dev, "%s: port %d\n", __func__,
- port->line);
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
return;
@@ -1658,7 +1660,8 @@ static void sci_request_dma(struct uart_port *port)
if (!nent)
sci_tx_dma_release(s, false);
else
- dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
+ __func__,
sg_dma_len(&s->sg_tx), port->state->xmit.buf,
&sg_dma_address(&s->sg_tx));
@@ -1870,13 +1873,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
smr_val = serial_port_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
- smr_val |= 0x40;
+ smr_val |= SCSMR_CHR;
if (termios->c_cflag & PARENB)
- smr_val |= 0x20;
+ smr_val |= SCSMR_PE;
if (termios->c_cflag & PARODD)
- smr_val |= 0x30;
+ smr_val |= SCSMR_PE | SCSMR_ODD;
if (termios->c_cflag & CSTOPB)
- smr_val |= 0x08;
+ smr_val |= SCSMR_STOP;
uart_update_timeout(port, termios->c_cflag, baud);
@@ -1884,7 +1887,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
__func__, smr_val, cks, t, s->cfg->scscr);
if (t >= 0) {
- serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
+ serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
serial_port_out(port, SCBRR, t);
reg = sci_getreg(port, HSSRR);
if (reg->size)
@@ -1932,8 +1935,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
if (s->chan_rx) {
s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
port->fifosize / 2;
- dev_dbg(port->dev,
- "DMA Rx t-out %ums, tty t-out %u jiffies\n",
+ dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
s->rx_timeout * 1000 / HZ, port->timeout);
if (s->rx_timeout < msecs_to_jiffies(20))
s->rx_timeout = msecs_to_jiffies(20);
@@ -1952,7 +1954,7 @@ static void sci_pm(struct uart_port *port, unsigned int state,
struct sci_port *sci_port = to_sci_port(port);
switch (state) {
- case 3:
+ case UART_PM_STATE_OFF:
sci_port_disable(sci_port);
break;
default:
@@ -2017,7 +2019,7 @@ static int sci_remap_port(struct uart_port *port)
* need to do any remapping, just cast the cookie
* directly.
*/
- port->membase = (void __iomem *)port->mapbase;
+ port->membase = (void __iomem *)(uintptr_t)port->mapbase;
}
return 0;
@@ -2388,8 +2390,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-static char banner[] __initdata =
- KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
+static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
static struct uart_driver sci_uart_driver = {
.owner = THIS_MODULE,
@@ -2423,25 +2424,25 @@ struct sci_port_info {
static const struct of_device_id of_sci_match[] = {
{
.compatible = "renesas,scif",
- .data = (void *)&(const struct sci_port_info) {
+ .data = &(const struct sci_port_info) {
.type = PORT_SCIF,
.regtype = SCIx_SH4_SCIF_REGTYPE,
},
}, {
.compatible = "renesas,scifa",
- .data = (void *)&(const struct sci_port_info) {
+ .data = &(const struct sci_port_info) {
.type = PORT_SCIFA,
.regtype = SCIx_SCIFA_REGTYPE,
},
}, {
.compatible = "renesas,scifb",
- .data = (void *)&(const struct sci_port_info) {
+ .data = &(const struct sci_port_info) {
.type = PORT_SCIFB,
.regtype = SCIx_SCIFB_REGTYPE,
},
}, {
.compatible = "renesas,hscif",
- .data = (void *)&(const struct sci_port_info) {
+ .data = &(const struct sci_port_info) {
.type = PORT_HSCIF,
.regtype = SCIx_HSCIF_REGTYPE,
},
@@ -2501,11 +2502,9 @@ static int sci_probe_single(struct platform_device *dev,
/* Sanity check */
if (unlikely(index >= SCI_NPORTS)) {
- dev_notice(&dev->dev, "Attempting to register port "
- "%d when only %d are available.\n",
+ dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n",
index+1, SCI_NPORTS);
- dev_notice(&dev->dev, "Consider bumping "
- "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
return -EINVAL;
}
@@ -2563,6 +2562,7 @@ static int sci_probe(struct platform_device *dev)
ret = cpufreq_register_notifier(&sp->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
if (unlikely(ret < 0)) {
+ uart_remove_one_port(&sci_uart_driver, &sp->port);
sci_cleanup_single(sp);
return ret;
}
@@ -2614,7 +2614,7 @@ static int __init sci_init(void)
{
int ret;
- printk(banner);
+ pr_info("%s\n", banner);
ret = uart_register_driver(&sci_uart_driver);
if (likely(ret == 0)) {
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index b7bfe24d4ebc..68b0fd4b9a6a 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -24,7 +24,6 @@
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
-#include <linux/sirfsoc_dma.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -173,7 +172,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
+ if (sirfport->tx_dma_chan) {
if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
dmaengine_pause(sirfport->tx_dma_chan);
sirfport->tx_dma_state = TX_DMA_PAUSE;
@@ -288,7 +287,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
else {
sirfsoc_uart_pio_tx_chars(sirfport, 1);
@@ -310,7 +309,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+ if (sirfport->rx_dma_chan) {
if (!sirfport->is_marco)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
@@ -675,7 +674,7 @@ recv_char:
uart_handle_cts_change(port, cts_status);
wake_up_interruptible(&state->port.delta_msr_wait);
}
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+ if (sirfport->rx_dma_chan) {
if (intr_status & uint_st->sirfsoc_rx_timeout)
sirfsoc_uart_handle_rx_tmo(sirfport);
if (intr_status & uint_st->sirfsoc_rx_done)
@@ -686,7 +685,7 @@ recv_char:
SIRFSOC_UART_IO_RX_MAX_CNT);
}
if (intr_status & uint_st->sirfsoc_txfifo_empty) {
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
else {
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
@@ -778,7 +777,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+ if (sirfport->rx_dma_chan)
sirfsoc_uart_start_next_rx_dma(port);
else {
if (!sirfport->is_marco)
@@ -1014,11 +1013,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
SIRFSOC_USP_ASYNC_DIV2_OFFSET);
}
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+ if (sirfport->tx_dma_chan)
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
else
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+ if (sirfport->rx_dma_chan)
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
else
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
@@ -1049,93 +1048,6 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
clk_disable_unprepare(sirfport->clk);
}
-static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- dma_cap_mask_t dma_mask;
- struct dma_slave_config tx_slv_cfg = {
- .dst_maxburst = 2,
- };
-
- dma_cap_zero(dma_mask);
- dma_cap_set(DMA_SLAVE, dma_mask);
- sirfport->tx_dma_chan = dma_request_channel(dma_mask,
- (dma_filter_fn)sirfsoc_dma_filter_id,
- (void *)sirfport->tx_dma_no);
- if (!sirfport->tx_dma_chan) {
- dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
- sirfport->tx_dma_no);
- return -EPROBE_DEFER;
- }
- dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
-
- return 0;
-}
-
-static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- dma_cap_mask_t dma_mask;
- int ret;
- int i, j;
- struct dma_slave_config slv_cfg = {
- .src_maxburst = 2,
- };
-
- dma_cap_zero(dma_mask);
- dma_cap_set(DMA_SLAVE, dma_mask);
- sirfport->rx_dma_chan = dma_request_channel(dma_mask,
- (dma_filter_fn)sirfsoc_dma_filter_id,
- (void *)sirfport->rx_dma_no);
- if (!sirfport->rx_dma_chan) {
- dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
- sirfport->rx_dma_no);
- ret = -EPROBE_DEFER;
- goto request_err;
- }
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
- sirfport->rx_dma_items[i].xmit.buf =
- dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
- if (!sirfport->rx_dma_items[i].xmit.buf) {
- dev_err(port->dev, "Uart alloc bufa failed\n");
- ret = -ENOMEM;
- goto alloc_coherent_err;
- }
- sirfport->rx_dma_items[i].xmit.head =
- sirfport->rx_dma_items[i].xmit.tail = 0;
- }
- dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
-
- return 0;
-alloc_coherent_err:
- for (j = 0; j < i; j++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[j].xmit.buf,
- sirfport->rx_dma_items[j].dma_addr);
- dma_release_channel(sirfport->rx_dma_chan);
-request_err:
- return ret;
-}
-
-static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport)
-{
- dmaengine_terminate_all(sirfport->tx_dma_chan);
- dma_release_channel(sirfport->tx_dma_chan);
-}
-
-static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport)
-{
- int i;
- struct uart_port *port = &sirfport->port;
- dmaengine_terminate_all(sirfport->rx_dma_chan);
- dma_release_channel(sirfport->rx_dma_chan);
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[i].xmit.buf,
- sirfport->rx_dma_items[i].dma_addr);
-}
-
static int sirfsoc_uart_startup(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
@@ -1174,18 +1086,12 @@ static int sirfsoc_uart_startup(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
-
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
- ret = sirfsoc_uart_init_rx_dma(port);
- if (ret)
- goto init_rx_err;
+ if (sirfport->rx_dma_chan)
wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
- SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
- SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
- SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
- }
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
- sirfsoc_uart_init_tx_dma(port);
+ SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
+ SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
+ SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
+ if (sirfport->tx_dma_chan) {
sirfport->tx_dma_state = TX_DMA_IDLE;
wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
@@ -1232,12 +1138,8 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
gpio_set_value(sirfport->rts_gpio, 1);
free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
}
- if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
- sirfsoc_uart_uninit_rx_dma(sirfport);
- if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
- sirfsoc_uart_uninit_tx_dma(sirfport);
+ if (sirfport->tx_dma_chan)
sirfport->tx_dma_state = TX_DMA_IDLE;
- }
}
static const char *sirfsoc_uart_type(struct uart_port *port)
@@ -1313,8 +1215,8 @@ sirfsoc_uart_console_setup(struct console *co, char *options)
port->cons = co;
/* default console tx/rx transfer using io mode */
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
+ sirfport->rx_dma_chan = NULL;
+ sirfport->tx_dma_chan = NULL;
return uart_set_options(port, co, baud, parity, bits, flow);
}
@@ -1382,6 +1284,13 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
struct uart_port *port;
struct resource *res;
int ret;
+ int i, j;
+ struct dma_slave_config slv_cfg = {
+ .src_maxburst = 2,
+ };
+ struct dma_slave_config tx_slv_cfg = {
+ .dst_maxburst = 2,
+ };
const struct of_device_id *match;
match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
@@ -1402,27 +1311,10 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
"sirf,uart-has-rtscts");
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) {
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart"))
sirfport->uart_reg->uart_type = SIRF_REAL_UART;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,uart-dma-rx-channel",
- &sirfport->rx_dma_no))
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,uart-dma-tx-channel",
- &sirfport->tx_dma_no))
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
- }
if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
sirfport->uart_reg->uart_type = SIRF_USP_UART;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,usp-dma-rx-channel",
- &sirfport->rx_dma_no))
- sirfport->rx_dma_no = UNVALID_DMA_CHAN;
- if (of_property_read_u32(pdev->dev.of_node,
- "sirf,usp-dma-tx-channel",
- &sirfport->tx_dma_no))
- sirfport->tx_dma_no = UNVALID_DMA_CHAN;
if (!sirfport->hw_flow_ctrl)
goto usp_no_flow_control;
if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL))
@@ -1515,8 +1407,32 @@ usp_no_flow_control:
goto port_err;
}
- return 0;
+ sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
+ for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
+ sirfport->rx_dma_items[i].xmit.buf =
+ dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
+ if (!sirfport->rx_dma_items[i].xmit.buf) {
+ dev_err(port->dev, "Uart alloc bufa failed\n");
+ ret = -ENOMEM;
+ goto alloc_coherent_err;
+ }
+ sirfport->rx_dma_items[i].xmit.head =
+ sirfport->rx_dma_items[i].xmit.tail = 0;
+ }
+ if (sirfport->rx_dma_chan)
+ dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
+ sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
+ if (sirfport->tx_dma_chan)
+ dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
+ return 0;
+alloc_coherent_err:
+ for (j = 0; j < i; j++)
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items[j].xmit.buf,
+ sirfport->rx_dma_items[j].dma_addr);
+ dma_release_channel(sirfport->rx_dma_chan);
port_err:
clk_put(sirfport->clk);
err:
@@ -1529,6 +1445,19 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
struct uart_port *port = &sirfport->port;
clk_put(sirfport->clk);
uart_remove_one_port(&sirfsoc_uart_drv, port);
+ if (sirfport->rx_dma_chan) {
+ int i;
+ dmaengine_terminate_all(sirfport->rx_dma_chan);
+ dma_release_channel(sirfport->rx_dma_chan);
+ for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items[i].xmit.buf,
+ sirfport->rx_dma_items[i].dma_addr);
+ }
+ if (sirfport->tx_dma_chan) {
+ dmaengine_terminate_all(sirfport->tx_dma_chan);
+ dma_release_channel(sirfport->tx_dma_chan);
+ }
return 0;
}
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index b7d679c0881b..8a6eddad2f3c 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -392,9 +392,6 @@ struct sirfsoc_uart_register sirfsoc_uart = {
/* Indicate how many buffers used */
#define SIRFSOC_RX_LOOP_BUF_CNT 2
-/* Indicate if DMA channel valid */
-#define IS_DMA_CHAN_VALID(x) ((x) != -1)
-#define UNVALID_DMA_CHAN -1
/* For Fast Baud Rate Calculation */
struct sirfsoc_baudrate_to_regv {
unsigned int baud_rate;
@@ -423,8 +420,6 @@ struct sirfsoc_uart_port {
/* for SiRFmarco, there are SET/CLR for UART_INT_EN */
bool is_marco;
struct sirfsoc_uart_register *uart_reg;
- int rx_dma_no;
- int tx_dma_no;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 5ae14b46cce0..d48e040cd8c5 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -7866,6 +7866,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+ memset(&new_line, 0, sizeof(new_line));
switch (flags){
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 144202eef6fe..53ba8537de8d 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1766,6 +1766,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+ memset(&new_line, 0, sizeof(new_line));
switch (flags){
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 765125dff20e..8ebd9f88a6f6 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -351,14 +351,11 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
* Takes any pending buffers and transfers their ownership to the
* ldisc side of the queue. It then schedules those characters for
* processing by the line discipline.
- * Note that this function can only be used when the low_latency flag
- * is unset. Otherwise the workqueue won't be flushed.
*/
void tty_schedule_flip(struct tty_port *port)
{
struct tty_bufhead *buf = &port->buf;
- WARN_ON(port->low_latency);
buf->tail->commit = buf->tail->used;
schedule_work(&buf->work);
@@ -482,17 +479,15 @@ static void flush_to_ldisc(struct work_struct *work)
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- if (!tty->port->low_latency)
- flush_work(&tty->port->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
* tty_flip_buffer_push - terminal
* @port: tty port to push
*
- * Queue a push of the terminal flip buffers to the line discipline. This
- * function must not be called from IRQ context if port->low_latency is
- * set.
+ * Queue a push of the terminal flip buffers to the line discipline.
+ * Can be called from IRQ/atomic context.
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
@@ -500,14 +495,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
void tty_flip_buffer_push(struct tty_port *port)
{
- struct tty_bufhead *buf = &port->buf;
-
- buf->tail->commit = buf->tail->used;
-
- if (port->low_latency)
- flush_to_ldisc(&buf->work);
- else
- schedule_work(&buf->work);
+ tty_schedule_flip(port);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c74a00ad7add..d3448a90f0f9 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1271,12 +1271,13 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
*
* Locking: None
*/
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
{
if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
- strcpy(p, driver->name);
+ return sprintf(p, "%s", driver->name);
else
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ return sprintf(p, "%s%d", driver->name,
+ index + driver->name_base);
}
/**
@@ -3545,9 +3546,19 @@ static ssize_t show_cons_active(struct device *dev,
if (i >= ARRAY_SIZE(cs))
break;
}
- while (i--)
- count += sprintf(buf + count, "%s%d%c",
- cs[i]->name, cs[i]->index, i ? ' ':'\n');
+ while (i--) {
+ int index = cs[i]->index;
+ struct tty_driver *drv = cs[i]->device(cs[i], &index);
+
+ /* don't resolve tty0 as some programs depend on it */
+ if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
+ count += tty_line_name(drv, index, buf + count);
+ else
+ count += sprintf(buf + count, "%s%d",
+ cs[i]->name, cs[i]->index);
+
+ count += sprintf(buf + count, "%c", i ? ' ':'\n');
+ }
console_unlock();
return count;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 23b5d32954bf..3ad0b61e35b4 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1590,9 +1590,9 @@ static void restore_cur(struct vc_data *vc)
vc->vc_need_wrap = 0;
}
-enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
+enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey,
EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
- ESpalette };
+ ESpalette, ESosc };
/* console_lock is held (except via vc_init()) */
static void reset_terminal(struct vc_data *vc, int do_clear)
@@ -1652,11 +1652,15 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
* Control characters can be used in the _middle_
* of an escape sequence.
*/
+ if (vc->vc_state == ESosc && c>=8 && c<=13) /* ... except for OSC */
+ return;
switch (c) {
case 0:
return;
case 7:
- if (vc->vc_bell_duration)
+ if (vc->vc_state == ESosc)
+ vc->vc_state = ESnormal;
+ else if (vc->vc_bell_duration)
kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration);
return;
case 8:
@@ -1767,7 +1771,9 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
} else if (c=='R') { /* reset palette */
reset_palette(vc);
vc->vc_state = ESnormal;
- } else
+ } else if (c>='0' && c<='9')
+ vc->vc_state = ESosc;
+ else
vc->vc_state = ESnormal;
return;
case ESpalette:
@@ -1807,9 +1813,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_par[vc->vc_npar] *= 10;
vc->vc_par[vc->vc_npar] += c - '0';
return;
- } else
- vc->vc_state = ESgotpars;
- case ESgotpars:
+ }
vc->vc_state = ESnormal;
switch(c) {
case 'h':
@@ -2023,6 +2027,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_translate = set_translate(vc->vc_G1_charset, vc);
vc->vc_state = ESnormal;
return;
+ case ESosc:
+ return;
default:
vc->vc_state = ESnormal;
}