usb: xhci: rework root port wake bits if controller isn't allowed to wakeup

commit a1377e5397ab321e21b793ec8cd2b6f12bd3c718 upstream.

When system is being suspended, if host device is not allowed to do wakeup,
xhci_suspend() needs to clear all root port wake on bits. Otherwise, some
platforms may generate spurious wakeup, even if PCI PME# is disabled.

The initial commit ff8cbf250b44 ("xhci: clear root port wake on bits"),
which also got into stable, turned out to not work correctly and had to
be reverted, and is now rewritten.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
[Mathias Nyman: reword commit message]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 41 insertions, 1 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 82b563fc4fd6..17e398748a2d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -35,6 +35,8 @@
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
 /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
 static int link_quirk;
 module_param(link_quirk, int, S_IRUGO | S_IWUSR);
@@ -842,13 +844,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 	xhci_set_cmd_ring_deq(xhci);
 }
 
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+	int port_index;
+	__le32 __iomem **port_array;
+	unsigned long flags;
+	u32 t1, t2;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* disble usb3 ports Wake bits*/
+	port_index = xhci->num_usb3_ports;
+	port_array = xhci->usb3_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	/* disble usb2 ports Wake bits*/
+	port_index = xhci->num_usb2_ports;
+	port_array = xhci->usb2_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
  * This is called when the machine transition into S3/S4 mode.
  *
  */
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 {
 	int			rc = 0;
 	unsigned int		delay = XHCI_MAX_HALT_USEC;
@@ -859,6 +895,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	/* Clear root port wake on bits if wakeup not allowed. */
+	if (!do_wakeup)
+		xhci_disable_port_wake_on_bits(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);