xhci: Setup array of USB 2.0 and USB 3.0 ports.

An xHCI host controller contains USB 2.0 and USB 3.0 ports, which can
occur in any order in the PORTSC registers.  We cannot read the port speed
bits in the PORTSC registers at init time to determine the port speed,
since those bits are only valid when a USB device is plugged into the
port.

Instead, we read the "Supported Protocol Capability" registers in the xHC
Extended Capabilities space.  Those describe the protocol, port offset in
the PORTSC registers, and port count.  We use those registers to create
two arrays of pointers to the PORTSC registers, one for USB 3.0 ports, and
another for USB 2.0 ports.  A third array keeps track of the port protocol
major revision, and is indexed with the internal xHCI port number.

This commit is a bit big, but it should be queued for stable because the "Don't
let the USB core disable SuperSpeed ports" patch depends on it.  There is no
other way to determine which ports are SuperSpeed ports without this patch.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: stable@kernel.org

1 files changed, 26 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e65647d445..170c367112d2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
 	u32			suspended_ports[8];	/* which ports are
 							   suspended */
 	unsigned long		resume_done[MAX_HC_PORTS];
+	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+	u8			*port_array;
+	/* Array of pointers to USB 3.0 PORTSC registers */
+	u32 __iomem		**usb3_ports;
+	unsigned int		num_usb3_ports;
+	/* Array of pointers to USB 2.0 PORTSC registers */
+	u32 __iomem		**usb2_ports;
+	unsigned int		num_usb2_ports;
 };
 
 /* For testing purposes */