summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
authorPeter Hung <hpeter@gmail.com>2015-03-17 17:48:25 +0800
committerJohan Hovold <johan@kernel.org>2015-03-27 17:29:27 +0100
commit8bb4ca6b56bdf65944d0848561ea8dcf53a87507 (patch)
tree93b35959b2195dd53f964ce24e6235ac03d9f0fa /drivers/usb/serial
parent94f87309fb12e3d41dbc56df899f3b357277d0bf (diff)
USB: f81232: implement set_termios()
The original driver had do not any h/w change in driver. This patch implements with configure H/W for baud/parity/word length/stop bits functional in f81232_set_termios(). This patch also implement DTR/RTS control when baudrate B0. We drop DTR/RTS when B0, otherwise enable it. We are checking baudrate in set_termios() too, If baudrate larger then 115200, it will be changed to 115200 and use tty_encode_baud_rate() to encode into tty Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/f81232.c112
1 files changed, 108 insertions, 4 deletions
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 960282304b50..c00ced1ed281 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -31,14 +31,19 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE 115200
+
/* USB Control EP parameter */
#define F81232_REGISTER_REQUEST 0xa0
#define F81232_GET_REGISTER 0xc0
#define F81232_SET_REGISTER 0x40
#define SERIAL_BASE_ADDRESS 0x0120
+#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
@@ -64,6 +69,11 @@ struct f81232_private {
struct usb_serial_port *port;
};
+static int calc_baud_divisor(speed_t baudrate)
+{
+ return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
{
int status;
@@ -350,6 +360,53 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
*/
}
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+ u8 lcr;
+ int divisor, status = 0;
+
+ divisor = calc_baud_divisor(baudrate);
+
+ status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+ &lcr); /* get LCR */
+ if (status) {
+ dev_err(&port->dev, "%s failed to get LCR: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr | UART_LCR_DLAB); /* Enable DLAB */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+ divisor & 0x00ff); /* low */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+ __func__, status);
+ goto reapply_lcr;
+ }
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ (divisor & 0xff00) >> 8); /* high */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+ __func__, status);
+ }
+
+reapply_lcr:
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr & ~UART_LCR_DLAB);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ }
+}
+
static int f81232_port_enable(struct usb_serial_port *port)
{
u8 val;
@@ -395,15 +452,62 @@ static int f81232_port_disable(struct usb_serial_port *port)
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- /* FIXME - Stubbed out for now */
+ u8 new_lcr = 0;
+ int status = 0;
+ speed_t baudrate;
/* Don't change anything if nothing has changed */
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
- /* Do the real work here... */
- if (old_termios)
- tty_termios_copy_hw(&tty->termios, old_termios);
+ if (C_BAUD(tty) == B0)
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ baudrate = tty_get_baud_rate(tty);
+ if (baudrate > 0) {
+ if (baudrate > F81232_MAX_BAUDRATE) {
+ baudrate = F81232_MAX_BAUDRATE;
+ tty_encode_baud_rate(tty, baudrate, baudrate);
+ }
+ f81232_set_baudrate(port, baudrate);
+ }
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set LCR: %d\n",
+ __func__, status);
+ }
}
static int f81232_tiocmget(struct tty_struct *tty)