Merge tag 'v4.14.159' into 4.14-2.0.x-imx

This is the 4.14.159 stable release

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/boot/dts/imx7s.dtsi
	arch/arm/mach-imx/cpuidle-imx6sx.c
	drivers/crypto/caam/caamalg.c
	drivers/crypto/mxs-dcp.c
	drivers/dma/imx-sdma.c
	drivers/input/keyboard/imx_keypad.c
	drivers/net/can/flexcan.c
	drivers/net/can/rx-offload.c
	drivers/net/wireless/ath/ath10k/pci.c
	drivers/pci/dwc/pci-imx6.c
	drivers/spi/spi-fsl-lpspi.c
	drivers/usb/dwc3/gadget.c

1 files changed, 10 insertions, 20 deletions

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 21c8925a4116..8391a88cf90f 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -796,30 +796,10 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo =
 		(struct uas_dev_info *)sdev->host->hostdata;
-	int maxp;
 
 	sdev->hostdata = devinfo;
 
 	/*
-	 * We have two requirements here. We must satisfy the requirements
-	 * of the physical HC and the demands of the protocol, as we
-	 * definitely want no additional memory allocation in this path
-	 * ruling out using bounce buffers.
-	 *
-	 * For a transmission on USB to continue we must never send
-	 * a package that is smaller than maxpacket. Hence the length of each
-         * scatterlist element except the last must be divisible by the
-         * Bulk maxpacket value.
-	 * If the HC does not ensure that through SG,
-	 * the upper layer must do that. We must assume nothing
-	 * about the capabilities off the HC, so we use the most
-	 * pessimistic requirement.
-	 */
-
-	maxp = usb_maxpacket(devinfo->udev, devinfo->data_in_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
-	/*
 	 * The protocol has no requirements on alignment in the strict sense.
 	 * Controllers may or may not have alignment restrictions.
 	 * As this is not exported, we use an extremely conservative guess.
@@ -852,6 +832,10 @@ static int uas_slave_configure(struct scsi_device *sdev)
 		sdev->wce_default_on = 1;
 	}
 
+	/* Some disks cannot handle READ_CAPACITY_16 */
+	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
+		sdev->no_read_capacity_16 = 1;
+
 	/*
 	 * Some disks return the total number of blocks in response
 	 * to READ CAPACITY rather than the highest block number.
@@ -861,6 +845,12 @@ static int uas_slave_configure(struct scsi_device *sdev)
 		sdev->fix_capacity = 1;
 
 	/*
+	 * in some cases we have to guess
+	 */
+	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
+		sdev->guess_capacity = 1;
+
+	/*
 	 * Some devices don't like MODE SENSE with page=0x3f,
 	 * which is the command used for checking if a device
 	 * is write-protected.  Now that we tell the sd driver