summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorDouglas Gilbert <dgilbert@interlog.com>2015-11-16 19:22:08 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-12-09 14:03:23 -0500
commit7ea7903e91418e5adde88c40fb65ba8047e77f67 (patch)
treef852971b84600dd7a639bb17b0a1e066ea50b0f8 /drivers
parent6ea81ff2449fe9f22c5fdaca530a17a7b0f4b25a (diff)
usb: gadget: atmel_usba_udc: Expose correct device speed
commit d134c48d889ddceadf4c990e6f3df16b816ed5d4 upstream. Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c2
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 351d48550c33..d6ca3697d3c8 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1634,7 +1634,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
spin_lock(&udc->lock);
int_enb = usba_int_enb_get(udc);
- status = usba_readl(udc, INT_STA) & int_enb;
+ status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {