mmc: host: sdhci: Fix for 64 bit quirks

Need to update the quirk defines for 64 bit support.  Currently
bits 32-63 are all being inadvertently set.  Updating these
defines allows the quirks bitmask to be set properly.

Conflicts:

	drivers/mmc/host/sdhci.h

Change-Id: Id178470642484f1f41f0fd7f7fb18c64667e1bbd
Signed-off-by: Greg Meiste <w30289@motorola.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>

1 files changed, 46 insertions, 30 deletions

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index d316bc79b636..e866164c1413 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -188,65 +188,81 @@ struct sdhci_host {
 	unsigned int		quirks;		/* Deviations from spec. */
 
 /* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1LL<<0)
 /* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+#define SDHCI_QUIRK_FORCE_DMA				(1LL<<1)
 /* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1LL<<2)
 /* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1LL<<3)
 /* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1LL<<4)
 /* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+#define SDHCI_QUIRK_BROKEN_DMA				(1LL<<5)
 /* Controller has an unusable ADMA engine */
-#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+#define SDHCI_QUIRK_BROKEN_ADMA				(1LL<<6)
 /* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1LL<<7)
 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1LL<<8)
 /* Controller can only ADMA chunks that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1LL<<9)
 /* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1LL<<10)
 /* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1LL<<11)
 /* Controller provides an incorrect timeout value for transfers */
-#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1LL<<12)
 /* Controller has an issue with buffer bits for small transfers */
-#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1LL<<13)
 /* Controller does not provide transfer-complete interrupt when not busy */
-#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1LL<<14)
 /* Controller has unreliable card detection */
-#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1LL<<15)
 /* Controller reports inverted write-protect state */
-#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1LL<<16)
 /* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1LL<<17)
 /* Controller does not like fast PIO transfers */
-#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1LL<<18)
 /* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1LL<<19)
 /* Controller has to be forced to use block size of 2048 bytes */
-#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1LL<<20)
 /* Controller cannot do multi-block transfers */
-#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1LL<<21)
 /* Controller can only handle 1-bit data transfers */
-#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1LL<<22)
 /* Controller needs 10ms delay between applying power and clock */
-#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1LL<<23)
 /* Controller uses SDCLK instead of TMCLK for data timeouts */
-#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1LL<<24)
 /* Controller reports wrong base clock capability */
-#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1LL<<25)
 /* Controller cannot support End Attribute in NOP ADMA descriptor */
-#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1LL<<26)
 /* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+#define SDHCI_QUIRK_MISSING_CAPS			(1LL<<27)
 /* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1LL<<28)
 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
-#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1LL<<29)
+/* Controller write protect bit is broken. Assume no write protection */
+#define SDHCI_QUIRK_BROKEN_WRITE_PROTECT		(1LL<<30)
+/* Controller needs INTERRUPT_AT_BLOCK_GAP enabled to detect card interrupts */
+#define SDHCI_QUIRK_ENABLE_INTERRUPT_AT_BLOCK_GAP	(1LL<<31)
+/* Controller should not program HIGH_SPEED_EN after switching to high speed */
+#define SDHCI_QUIRK_BROKEN_CTRL_HISPD			(1LL<<32)
+/* Controller supports 8-bit data width */
+#define SDHCI_QUIRK_8_BIT_DATA				(1LL<<33)
+/* Controller has no version register */
+#define SDHCI_QUIRK_NO_VERSION_REG			(1LL<<34)
+/* Controller treats ADMA descriptors with length 0000h incorrectly */
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1LL<<35)
+/* Controller should not use SDIO IRQ */
+#define SDHCI_QUIRK_NO_SDIO_IRQ				(1LL<<36)
+/* Controller should only use high-speed mode */
+#define SDHCI_QUIRK_FORCE_HIGH_SPEED_MODE		(1LL<<37)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */