summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2014-11-12 16:11:55 +1100
committerChristoph Hellwig <hch@lst.de>2014-11-20 09:11:06 +0100
commit3f9e986e2f1df8fa69ffe213098c1ee98f1c9584 (patch)
tree56371541bd19ebaefaa05426a1d9f0b8a21af197 /drivers
parent997acab7d593913eaa0606ff257079efcfcb146d (diff)
ncr5380: Remove duplicate comments
The LIMIT_TRANSFERSIZE, PSEUDO_DMA, PARITY and UNSAFE options are all documented in the core drivers where they are used. The same goes for the chip databook reference. Remove the duplicate comments. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/dtc.c17
-rw-r--r--drivers/scsi/dtc.h16
-rw-r--r--drivers/scsi/g_NCR5380.c16
-rw-r--r--drivers/scsi/g_NCR5380.h12
-rw-r--r--drivers/scsi/mac_scsi.c12
-rw-r--r--drivers/scsi/mac_scsi.h12
-rw-r--r--drivers/scsi/pas16.c31
-rw-r--r--drivers/scsi/pas16.h12
-rw-r--r--drivers/scsi/sun3_scsi.c21
-rw-r--r--drivers/scsi/sun3_scsi.h12
-rw-r--r--drivers/scsi/t128.c23
-rw-r--r--drivers/scsi/t128.h12
12 files changed, 1 insertions, 195 deletions
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 975abbfe0bba..43be785778d9 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -19,24 +19,9 @@
* +1 (303) 440-4894
*
* DISTRIBUTION RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
-*/
+ */
/*
- * Options :
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers.
- * You probably want this.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h
index b96252ac641a..46ad3403bda7 100644
--- a/drivers/scsi/dtc.h
+++ b/drivers/scsi/dtc.h
@@ -7,22 +7,6 @@
* +1 (303) 440-4894
*
* DISTRIBUTION RELEASE 2.
- *
- * For more information, please consult
- *
- *
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef DTC3280_H
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index eda978f29d9d..151e1ad8fe9f 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -20,18 +20,6 @@
* Thomas Sailer, sailer@ife.ee.ethz.ch
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
@@ -40,10 +28,6 @@
*/
/*
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
- *
* The card is detected and initialized in one of several ways :
* 1. With command line overrides - NCR5380=port,irq may be
* used on the LILO command line to override the defaults.
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 75e7e4983263..e15b95c37860 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -11,18 +11,6 @@
* K.Lentin@cs.monash.edu.au
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef GENERIC_NCR5380_H
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 3f125838a29d..4dec06da3f34 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -11,18 +11,6 @@
* Copyright 1995, Russell King
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#include <linux/types.h>
diff --git a/drivers/scsi/mac_scsi.h b/drivers/scsi/mac_scsi.h
index c86ced5b56db..0b123fe9c248 100644
--- a/drivers/scsi/mac_scsi.h
+++ b/drivers/scsi/mac_scsi.h
@@ -8,18 +8,6 @@
* +1 (303) 440-4894
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef MAC_NCR5380_H
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index 7621205e4aa0..3e40479ebb48 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -22,40 +22,9 @@
* Media Vision
* (510) 770-8600
* (800) 348-7116
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
- * Options :
- * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512
- * bytes at a time. Since interrupts are disabled by default during
- * these transfers, we might need this to give reasonable interrupt
- * service time if the transfer size gets too large.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. This
- * parameter comes from the NCR5380 code. It is NOT unsafe with
- * the PAS16 and you should use it. If you don't you will have
- * a problem with dropped characters during high speed
- * communications during SCSI transfers. If you really don't
- * want to use UNSAFE you can try defining LIMIT_TRANSFERSIZE or
- * twiddle with the transfer size in the high level code.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - There are many different models of
* the Pro Audio Spectrum/Studio 16, and I only have one of
diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h
index 772c4e0eee43..489acb5bf299 100644
--- a/drivers/scsi/pas16.h
+++ b/drivers/scsi/pas16.h
@@ -18,18 +18,6 @@
* Media Vision
* (510) 770-8600
* (800) 348-7116
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index a5e58a7373be..26b95dcb5e48 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -22,27 +22,6 @@
* Copyright 1995, Russell King
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-
-/*
- * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
- *
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
*/
#include <linux/types.h>
diff --git a/drivers/scsi/sun3_scsi.h b/drivers/scsi/sun3_scsi.h
index b3163a5f11c7..cb9d2a488404 100644
--- a/drivers/scsi/sun3_scsi.h
+++ b/drivers/scsi/sun3_scsi.h
@@ -15,18 +15,6 @@
* +1 (303) 440-4894
*
* ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef SUN3_SCSI_H
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 4253fe97c210..6220dee8b697 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -23,32 +23,9 @@
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
- * Options :
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
- * only really want to use this if you're having a problem with
- * dropped characters during high speed communications, and even
- * then, you're going to be better off twiddling with transfersize.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index 82959ed89a18..9f06c1851069 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -20,18 +20,6 @@
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef T128_H