summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorHein Tibosch <hein_tibosch@yahoo.es>2012-10-25 13:38:05 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-25 14:37:53 -0700
commitd5ea7b5ec1ee4dac868143806c0bd94855754677 (patch)
treee0f1a0677b0cd27392bce3c8fec7e5ca1075f156 /drivers
parent35cfa2b0b491c37e23527822bf365610dbb188e5 (diff)
drivers/dma/dw_dmac: make driver's endianness configurable
The dw_dmac driver was originally developed for avr32 to be used with the Synopsys DesignWare AHB DMA controller. Starting from 2.6.38, access to the device's i/o memory was done with the little-endian readl/writel functions(1) This broke the driver for the avr32 platform, because it needs big (native) endian accessors. This patch makes the endianness configurable using 'DW_DMAC_BIG_ENDIAN_IO', which will default be true for AVR32 I submitted this patch before(2) but then waited for Andy to finish other changes to the same module(3). (1) https://patchwork.kernel.org/patch/608211 (2) https://lkml.org/lkml/2012/8/26/148 (3) https://lkml.org/lkml/2012/9/21/173 Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Havard Skinnemoen <havard@skinnemoen.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/Kconfig11
-rw-r--r--drivers/dma/dw_dmac_regs.h18
2 files changed, 24 insertions, 5 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 677cd6e4e1a1..d4c12180c654 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -90,6 +90,17 @@ config DW_DMAC
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config DW_DMAC_BIG_ENDIAN_IO
+ bool "Use big endian I/O register access"
+ default y if AVR32
+ depends on DW_DMAC
+ help
+ Say yes here to use big endian I/O access when reading and writing
+ to the DMA controller registers. This is needed on some platforms,
+ like the Atmel AVR32 architecture.
+
+ If unsure, use the default setting.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index ff39fa6cd2bc..88965597b7d0 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -98,9 +98,17 @@ struct dw_dma_regs {
u32 DW_PARAMS;
};
+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
+#define dma_readl_native ioread32be
+#define dma_writel_native iowrite32be
+#else
+#define dma_readl_native readl
+#define dma_writel_native writel
+#endif
+
/* To access the registers in early stage of probe */
#define dma_read_byaddr(addr, name) \
- readl((addr) + offsetof(struct dw_dma_regs, name))
+ dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
/* Bitfields in DW_PARAMS */
#define DW_PARAMS_NR_CHAN 8 /* number of channels */
@@ -216,9 +224,9 @@ __dwc_regs(struct dw_dma_chan *dwc)
}
#define channel_readl(dwc, name) \
- readl(&(__dwc_regs(dwc)->name))
+ dma_readl_native(&(__dwc_regs(dwc)->name))
#define channel_writel(dwc, name, val) \
- writel((val), &(__dwc_regs(dwc)->name))
+ dma_writel_native((val), &(__dwc_regs(dwc)->name))
static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
{
@@ -246,9 +254,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
}
#define dma_readl(dw, name) \
- readl(&(__dw_regs(dw)->name))
+ dma_readl_native(&(__dw_regs(dw)->name))
#define dma_writel(dw, name, val) \
- writel((val), &(__dw_regs(dw)->name))
+ dma_writel_native((val), &(__dw_regs(dw)->name))
#define channel_set_bit(dw, reg, mask) \
dma_writel(dw, reg, ((mask) << 8) | (mask))