summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorIan Abbott <abbotti@mev.co.uk>2013-12-13 12:00:30 +0000
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-29 05:10:42 -0800
commit6013932c9416e0d452e9fbdfeb5a85ec308831dc (patch)
tree46313b6131083f7379974c139b4247481e086684 /drivers
parent777f8f3bcde8dc29bac9ab7e4e94dd84887ba50d (diff)
staging: comedi: 8255_pci: fix for newer PCI-DIO48H
commit 0283f7a100882684ad32b768f9f1ad81658a0b92 upstream. At some point, Measurement Computing / ComputerBoards redesigned the PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip. This meant they had to put their hardware registers in the PCI BAR 2 region instead of PCI BAR 1. Unfortunately, they kept the same PCI device ID for the new design. This means the driver recognizes the newer cards, but doesn't work (and is likely to screw up the local configuration registers of the PLX chip) because it's using the wrong region. Since the PCI subvendor and subdevice IDs were both zero on the old design, but are the same as the vendor and device on the new design, we can tell the old design and new design apart easily enough. Split the existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new entries, referenced by different entries in the PCI device ID table `pci_8255_pci_table[]`. Use the same board name for both entries. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/staging/comedi/drivers/cb_pcidio.c21
1 files changed, 8 insertions, 13 deletions
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 8f3215239a15..453ea2d57346 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -56,10 +56,6 @@ struct pcidio_board {
const char *name; /* name of the board */
int dev_id;
int n_8255; /* number of 8255 chips on board */
-
- /* indices of base address regions */
- int pcicontroler_badrindex;
- int dioregs_badrindex;
};
static const struct pcidio_board pcidio_boards[] = {
@@ -67,22 +63,16 @@ static const struct pcidio_board pcidio_boards[] = {
.name = "pci-dio24",
.dev_id = 0x0028,
.n_8255 = 1,
- .pcicontroler_badrindex = 1,
- .dioregs_badrindex = 2,
},
{
.name = "pci-dio24h",
.dev_id = 0x0014,
.n_8255 = 1,
- .pcicontroler_badrindex = 1,
- .dioregs_badrindex = 2,
},
{
.name = "pci-dio48h",
.dev_id = 0x000b,
.n_8255 = 2,
- .pcicontroler_badrindex = 0,
- .dioregs_badrindex = 1,
},
};
@@ -239,10 +229,15 @@ found:
if (comedi_pci_enable(pcidev, thisboard->name))
return -EIO;
- devpriv->dio_reg_base
- =
+ /*
+ * Use PCI BAR 2 region if non-zero length, else use PCI BAR 1 region.
+ * PCI BAR 1 is only used for older PCI-DIO48H boards. At some point
+ * the PCI-DIO48H was redesigned to use the same PCI interface chip
+ * (and same PCI BAR region) as the other boards.
+ */
+ devpriv->dio_reg_base =
pci_resource_start(devpriv->pci_dev,
- pcidio_boards[index].dioregs_badrindex);
+ (pci_resource_len(pcidev, 2) ? 2 : 1));
/*
* Allocate the subdevice structures. alloc_subdevice() is a