sparc: copy exported sparc64 specific header files to asm-sparc

Copy was done using the following simple script:

set -e
SPARC64="h display7seg.h envctrl.h psrcompat.h pstate.h uctx.h utrap.h watchdog.h"
for FILE in ${SPARC64}; do
	if [ -f asm-sparc/$FILE ]; then
		echo $FILE exist in asm-sparc
	fi
	cat asm-sparc64/$FILE > asm-sparc/$FILE
	printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
done

The name of the copied files are added to asm-sparc/Kbuild
to keep "make headers_check" functional.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 1 insertions, 103 deletions

diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
index a5668a082b14..a2cc0ca334ba 100644
--- a/include/asm-sparc64/envctrl.h
+++ b/include/asm-sparc64/envctrl.h
@@ -1,103 +1 @@
-/*
- *
- * envctrl.h: Definitions for access to the i2c environment
- *            monitoring on Ultrasparc systems.
- *
- * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
- * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
- * VT - Add all ioctl commands and environment status definitions 
- * VT - Add application note 
- */
-#ifndef _SPARC64_ENVCTRL_H
-#define _SPARC64_ENVCTRL_H 1
-
-#include <linux/ioctl.h>
-
-/* Application note:
- *
- * The driver supports 4 operations: open(), close(), ioctl(), read()
- * The device name is /dev/envctrl.
- * Below is sample usage:
- *
- *	fd = open("/dev/envtrl", O_RDONLY);
- *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
- *		printf("error\n");
- *	ret = read(fd, buf, 10);
- *	close(fd);
- *
- * Notice in the case of cpu voltage and temperature, the default is
- * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
- * pass in cpu number in ioctl() last parameter.  For example, to
- * get the voltage of cpu2:
- *
- *	ioctlbuf[0] = 2;
- *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
- *		printf("error\n");
- *	ret = read(fd, buf, 10);
- *
- * All the return values are in ascii.  So check read return value
- * and do appropriate conversions in your application.
- */
-
-/* IOCTL commands */
-
-/* Note: these commands reflect possible monitor features.
- * Some boards choose to support some of the features only.
- */
-#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
-#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
-#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
-#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
-#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
-#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
-#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
-#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
-#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
-
-#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
-
-/* Read return values for a voltage status request. */
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
-#define ENVCTRL_VOLTAGE_BAD			0x02
-#define ENVCTRL_POWERSUPPLY_BAD			0x03
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
-
-/* Read return values for a fan status request.
- * A failure match means either the fan fails or
- * the fan is not connected.  Some boards have optional
- * connectors to connect extra fans.
- *
- * There are maximum 8 monitor fans.  Some are cpu fans
- * some are system fans.  The mask below only indicates
- * fan by order number.
- * Below is a sample application:
- *
- *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
- *		printf("ioctl fan failed\n");
- *	}
- *	if (read(fd, rslt, 1) <= 0) {
- *		printf("error or fan not monitored\n");
- *	} else {
- *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
- *			printf("all fans good\n");
- *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
- *		printf("all fans bad\n");
- *	} else {
- *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
- *			printf("fan 0 failed or not connected\n");
- *	}
- *	......
- */  
-
-#define ENVCTRL_ALL_FANS_GOOD			0x00
-#define ENVCTRL_FAN0_FAILURE_MASK		0x01
-#define ENVCTRL_FAN1_FAILURE_MASK		0x02
-#define ENVCTRL_FAN2_FAILURE_MASK		0x04
-#define ENVCTRL_FAN3_FAILURE_MASK		0x08
-#define ENVCTRL_FAN4_FAILURE_MASK		0x10
-#define ENVCTRL_FAN5_FAILURE_MASK		0x20
-#define ENVCTRL_FAN6_FAILURE_MASK		0x40
-#define ENVCTRL_FAN7_FAILURE_MASK		0x80
-#define ENVCTRL_ALL_FANS_BAD 			0xFF
-
-#endif /* !(_SPARC64_ENVCTRL_H) */
+#include <asm-sparc/envctrl.h>