summaryrefslogtreecommitdiff
path: root/include/linux/com20020.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/com20020.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/com20020.h')
-rw-r--r--include/linux/com20020.h115
1 files changed, 115 insertions, 0 deletions
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
new file mode 100644
index 000000000000..ac6d9a43e085
--- /dev/null
+++ b/include/linux/com20020.h
@@ -0,0 +1,115 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support - function declarations
+ *
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ * for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency. This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#ifndef __COM20020_H
+#define __COM20020_H
+
+int com20020_check(struct net_device *dev);
+int com20020_found(struct net_device *dev, int shared);
+
+/* The number of low I/O ports used by the card. */
+#define ARCNET_TOTAL_SIZE 8
+
+/* various register addresses */
+#ifdef CONFIG_SA1100_CT6001
+#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */
+#else
+#define BUS_ALIGN 1
+#endif
+
+
+#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */
+#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */
+#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */
+#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */
+#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */
+#define _ADDR_LO (ioaddr+BUS_ALIGN*3)
+#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */
+#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */
+#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */
+#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG
+ or _SUBADR) */
+
+/* in the ADDR_HI register */
+#define RDDATAflag 0x80 /* next access is a read (not a write) */
+
+/* in the DIAGSTAT register */
+#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */
+
+/* in the CONFIG register */
+#define RESETcfg 0x80 /* put card in reset state */
+#define TXENcfg 0x20 /* enable TX */
+
+/* in SETUP register */
+#define PROMISCset 0x10 /* enable RCV_ALL */
+#define P1MODE 0x80 /* enable P1-MODE for Backplane */
+#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */
+
+/* COM2002x */
+#define SUB_TENTATIVE 0 /* tentative node ID */
+#define SUB_NODE 1 /* node ID */
+#define SUB_SETUP1 2 /* various options */
+#define SUB_TEST 3 /* test/diag register */
+
+/* COM20022 only */
+#define SUB_SETUP2 4 /* sundry options */
+#define SUB_BUSCTL 5 /* bus control options */
+#define SUB_DMACOUNT 6 /* DMA count options */
+
+#define SET_SUBADR(x) do { \
+ if ((x) < 4) \
+ { \
+ lp->config = (lp->config & ~0x03) | (x); \
+ SETCONF; \
+ } \
+ else \
+ { \
+ outb(x, _SUBADR); \
+ } \
+} while (0)
+
+#undef ARCRESET
+#undef ASTATUS
+#undef ACOMMAND
+#undef AINTMASK
+
+#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
+ udelay(5); \
+ outb(lp->config , _CONFIG); \
+ }
+#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \
+ udelay(5); \
+ outb(0x18 , _CONFIG); \
+ }
+
+#define ASTATUS() inb(_STATUS)
+#define ADIAGSTATUS() inb(_DIAGSTAT)
+#define ACOMMAND(cmd) outb((cmd),_COMMAND)
+#define AINTMASK(msk) outb((msk),_INTMASK)
+
+#define SETCONF outb(lp->config, _CONFIG)
+
+#endif /* __COM20020_H */