summaryrefslogtreecommitdiff
path: root/include/linux/ethtool.h
diff options
context:
space:
mode:
authorDavid Woodhouse <dwmw2@shinybook.infradead.org>2006-04-29 01:53:47 +0100
committerDavid Woodhouse <dwmw2@infradead.org>2006-04-29 01:53:47 +0100
commitc3ce7e203af5d8eab7c3390fc991a1fcb152f741 (patch)
tree43b0837c42a1deb5b0f87800bf6a5ed8eea2eafe /include/linux/ethtool.h
parent56142536868a2be34f261ed8fdca1610f8a73fbd (diff)
Sanitise ethtool.h and mii.h for userspace.
They shouldn't be using 'u32' et al in structures which are used for communication with userspace. Switch to the proper types (__u32 etc). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Diffstat (limited to 'include/linux/ethtool.h')
-rw-r--r--include/linux/ethtool.h169
1 files changed, 86 insertions, 83 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 93535f093216..cf2abeca92a0 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -15,24 +15,24 @@
/* This should work for both 32 and 64 bit userland. */
struct ethtool_cmd {
- u32 cmd;
- u32 supported; /* Features this interface supports */
- u32 advertising; /* Features this interface advertises */
- u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
- u8 duplex; /* Duplex, half or full */
- u8 port; /* Which connector port */
- u8 phy_address;
- u8 transceiver; /* Which transceiver to use */
- u8 autoneg; /* Enable or disable autonegotiation */
- u32 maxtxpkt; /* Tx pkts before generating tx int */
- u32 maxrxpkt; /* Rx pkts before generating rx int */
- u32 reserved[4];
+ __u32 cmd;
+ __u32 supported; /* Features this interface supports */
+ __u32 advertising; /* Features this interface advertises */
+ __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
+ __u8 duplex; /* Duplex, half or full */
+ __u8 port; /* Which connector port */
+ __u8 phy_address;
+ __u8 transceiver; /* Which transceiver to use */
+ __u8 autoneg; /* Enable or disable autonegotiation */
+ __u32 maxtxpkt; /* Tx pkts before generating tx int */
+ __u32 maxrxpkt; /* Rx pkts before generating rx int */
+ __u32 reserved[4];
};
#define ETHTOOL_BUSINFO_LEN 32
/* these strings are set to whatever the driver author decides... */
struct ethtool_drvinfo {
- u32 cmd;
+ __u32 cmd;
char driver[32]; /* driver short name, "tulip", "eepro100" */
char version[32]; /* driver version string */
char fw_version[32]; /* firmware version string, if applicable */
@@ -40,53 +40,53 @@ struct ethtool_drvinfo {
/* For PCI devices, use pci_name(pci_dev). */
char reserved1[32];
char reserved2[16];
- u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
- u32 testinfo_len;
- u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
- u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
+ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
+ __u32 testinfo_len;
+ __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
+ __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
};
#define SOPASS_MAX 6
/* wake-on-lan settings */
struct ethtool_wolinfo {
- u32 cmd;
- u32 supported;
- u32 wolopts;
- u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+ __u32 cmd;
+ __u32 supported;
+ __u32 wolopts;
+ __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
};
/* for passing single values */
struct ethtool_value {
- u32 cmd;
- u32 data;
+ __u32 cmd;
+ __u32 data;
};
/* for passing big chunks of data */
struct ethtool_regs {
- u32 cmd;
- u32 version; /* driver-specific, indicates different chips/revs */
- u32 len; /* bytes */
- u8 data[0];
+ __u32 cmd;
+ __u32 version; /* driver-specific, indicates different chips/revs */
+ __u32 len; /* bytes */
+ __u8 data[0];
};
/* for passing EEPROM chunks */
struct ethtool_eeprom {
- u32 cmd;
- u32 magic;
- u32 offset; /* in bytes */
- u32 len; /* in bytes */
- u8 data[0];
+ __u32 cmd;
+ __u32 magic;
+ __u32 offset; /* in bytes */
+ __u32 len; /* in bytes */
+ __u8 data[0];
};
/* for configuring coalescing parameters of chip */
struct ethtool_coalesce {
- u32 cmd; /* ETHTOOL_{G,S}COALESCE */
+ __u32 cmd; /* ETHTOOL_{G,S}COALESCE */
/* How many usecs to delay an RX interrupt after
* a packet arrives. If 0, only rx_max_coalesced_frames
* is used.
*/
- u32 rx_coalesce_usecs;
+ __u32 rx_coalesce_usecs;
/* How many packets to delay an RX interrupt after
* a packet arrives. If 0, only rx_coalesce_usecs is
@@ -94,21 +94,21 @@ struct ethtool_coalesce {
* to zero as this would cause RX interrupts to never be
* generated.
*/
- u32 rx_max_coalesced_frames;
+ __u32 rx_max_coalesced_frames;
/* Same as above two parameters, except that these values
* apply while an IRQ is being serviced by the host. Not
* all cards support this feature and the values are ignored
* in that case.
*/
- u32 rx_coalesce_usecs_irq;
- u32 rx_max_coalesced_frames_irq;
+ __u32 rx_coalesce_usecs_irq;
+ __u32 rx_max_coalesced_frames_irq;
/* How many usecs to delay a TX interrupt after
* a packet is sent. If 0, only tx_max_coalesced_frames
* is used.
*/
- u32 tx_coalesce_usecs;
+ __u32 tx_coalesce_usecs;
/* How many packets to delay a TX interrupt after
* a packet is sent. If 0, only tx_coalesce_usecs is
@@ -116,22 +116,22 @@ struct ethtool_coalesce {
* to zero as this would cause TX interrupts to never be
* generated.
*/
- u32 tx_max_coalesced_frames;
+ __u32 tx_max_coalesced_frames;
/* Same as above two parameters, except that these values
* apply while an IRQ is being serviced by the host. Not
* all cards support this feature and the values are ignored
* in that case.
*/
- u32 tx_coalesce_usecs_irq;
- u32 tx_max_coalesced_frames_irq;
+ __u32 tx_coalesce_usecs_irq;
+ __u32 tx_max_coalesced_frames_irq;
/* How many usecs to delay in-memory statistics
* block updates. Some drivers do not have an in-memory
* statistic block, and in such cases this value is ignored.
* This value must not be zero.
*/
- u32 stats_block_coalesce_usecs;
+ __u32 stats_block_coalesce_usecs;
/* Adaptive RX/TX coalescing is an algorithm implemented by
* some drivers to improve latency under low packet rates and
@@ -140,18 +140,18 @@ struct ethtool_coalesce {
* not implemented by the driver causes these values to be
* silently ignored.
*/
- u32 use_adaptive_rx_coalesce;
- u32 use_adaptive_tx_coalesce;
+ __u32 use_adaptive_rx_coalesce;
+ __u32 use_adaptive_tx_coalesce;
/* When the packet rate (measured in packets per second)
* is below pkt_rate_low, the {rx,tx}_*_low parameters are
* used.
*/
- u32 pkt_rate_low;
- u32 rx_coalesce_usecs_low;
- u32 rx_max_coalesced_frames_low;
- u32 tx_coalesce_usecs_low;
- u32 tx_max_coalesced_frames_low;
+ __u32 pkt_rate_low;
+ __u32 rx_coalesce_usecs_low;
+ __u32 rx_max_coalesced_frames_low;
+ __u32 tx_coalesce_usecs_low;
+ __u32 tx_max_coalesced_frames_low;
/* When the packet rate is below pkt_rate_high but above
* pkt_rate_low (both measured in packets per second) the
@@ -162,43 +162,43 @@ struct ethtool_coalesce {
* is above pkt_rate_high, the {rx,tx}_*_high parameters are
* used.
*/
- u32 pkt_rate_high;
- u32 rx_coalesce_usecs_high;
- u32 rx_max_coalesced_frames_high;
- u32 tx_coalesce_usecs_high;
- u32 tx_max_coalesced_frames_high;
+ __u32 pkt_rate_high;
+ __u32 rx_coalesce_usecs_high;
+ __u32 rx_max_coalesced_frames_high;
+ __u32 tx_coalesce_usecs_high;
+ __u32 tx_max_coalesced_frames_high;
/* How often to do adaptive coalescing packet rate sampling,
* measured in seconds. Must not be zero.
*/
- u32 rate_sample_interval;
+ __u32 rate_sample_interval;
};
/* for configuring RX/TX ring parameters */
struct ethtool_ringparam {
- u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
+ __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
/* Read only attributes. These indicate the maximum number
* of pending RX/TX ring entries the driver will allow the
* user to set.
*/
- u32 rx_max_pending;
- u32 rx_mini_max_pending;
- u32 rx_jumbo_max_pending;
- u32 tx_max_pending;
+ __u32 rx_max_pending;
+ __u32 rx_mini_max_pending;
+ __u32 rx_jumbo_max_pending;
+ __u32 tx_max_pending;
/* Values changeable by the user. The valid values are
* in the range 1 to the "*_max_pending" counterpart above.
*/
- u32 rx_pending;
- u32 rx_mini_pending;
- u32 rx_jumbo_pending;
- u32 tx_pending;
+ __u32 rx_pending;
+ __u32 rx_mini_pending;
+ __u32 rx_jumbo_pending;
+ __u32 tx_pending;
};
/* for configuring link flow control parameters */
struct ethtool_pauseparam {
- u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
+ __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
* being true) the user may set 'autonet' here non-zero to have the
@@ -210,9 +210,9 @@ struct ethtool_pauseparam {
* then {rx,tx}_pause force the driver to use/not-use pause
* flow control.
*/
- u32 autoneg;
- u32 rx_pause;
- u32 tx_pause;
+ __u32 autoneg;
+ __u32 rx_pause;
+ __u32 tx_pause;
};
#define ETH_GSTRING_LEN 32
@@ -223,10 +223,10 @@ enum ethtool_stringset {
/* for passing string sets for data tagging */
struct ethtool_gstrings {
- u32 cmd; /* ETHTOOL_GSTRINGS */
- u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
- u32 len; /* number of strings in the string set */
- u8 data[0];
+ __u32 cmd; /* ETHTOOL_GSTRINGS */
+ __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
+ __u32 len; /* number of strings in the string set */
+ __u8 data[0];
};
enum ethtool_test_flags {
@@ -236,26 +236,28 @@ enum ethtool_test_flags {
/* for requesting NIC test and getting results*/
struct ethtool_test {
- u32 cmd; /* ETHTOOL_TEST */
- u32 flags; /* ETH_TEST_FL_xxx */
- u32 reserved;
- u32 len; /* result length, in number of u64 elements */
- u64 data[0];
+ __u32 cmd; /* ETHTOOL_TEST */
+ __u32 flags; /* ETH_TEST_FL_xxx */
+ __u32 reserved;
+ __u32 len; /* result length, in number of u64 elements */
+ __u64 data[0];
};
/* for dumping NIC-specific statistics */
struct ethtool_stats {
- u32 cmd; /* ETHTOOL_GSTATS */
- u32 n_stats; /* number of u64's being returned */
- u64 data[0];
+ __u32 cmd; /* ETHTOOL_GSTATS */
+ __u32 n_stats; /* number of u64's being returned */
+ __u64 data[0];
};
struct ethtool_perm_addr {
- u32 cmd; /* ETHTOOL_GPERMADDR */
- u32 size;
- u8 data[0];
+ __u32 cmd; /* ETHTOOL_GPERMADDR */
+ __u32 size;
+ __u8 data[0];
};
+#ifdef __KERNEL__
+
struct net_device;
/* Some generic methods drivers may use in their ethtool_ops */
@@ -371,6 +373,7 @@ struct ethtool_ops {
u32 (*get_ufo)(struct net_device *);
int (*set_ufo)(struct net_device *, u32);
};
+#endif /* __KERNEL__ */
/* CMDs currently supported */
#define ETHTOOL_GSET 0x00000001 /* Get settings. */