ENGR00141217-2 include file upgrade to 2.6.38

Add ipu tve header file

Signed-off-by: Frank Li <Frank.Li@freescale.com>

1 files changed, 154 insertions, 1 deletions

diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index fffdf00f87b9..592bad1da973 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -6,7 +6,7 @@
  *
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -50,6 +50,15 @@ enum fsl_usb2_operating_modes {
 	FSL_USB2_DR_OTG,
 };
 
+/* this used for usb port type */
+enum fsl_usb2_modes {
+	FSL_USB_DR_HOST,
+	FSL_USB_DR_DEVICE,
+	FSL_USB_MPH_HOST1,
+	FSL_USB_MPH_HOST2,
+	FSL_USB_UNKNOWN, /* unkonwn status */
+};
+
 enum fsl_usb2_phy_modes {
 	FSL_USB2_PHY_NONE,
 	FSL_USB2_PHY_ULPI,
@@ -58,8 +67,16 @@ enum fsl_usb2_phy_modes {
 	FSL_USB2_PHY_SERIAL,
 };
 
+enum usb_wakeup_event {
+	WAKEUP_EVENT_INVALID,
+	WAKEUP_EVENT_VBUS,
+	WAKEUP_EVENT_ID,
+	WAKEUP_EVENT_DPDM, /* for remote wakeup */
+};
+
 struct clk;
 struct platform_device;
+struct fsl_usb2_wakeup_platform_data;
 
 struct fsl_usb2_platform_data {
 	/* board specific information */
@@ -84,6 +101,36 @@ struct fsl_usb2_platform_data {
 	unsigned	suspended:1;
 	unsigned	already_suspended:1;
 
+	/* Freescale private */
+	char		*name;
+	u32		phy_regs;	/* usb phy register base */
+	u32 		xcvr_type;	/* PORTSC_PTS_* */
+	char 		*transceiver;	/* transceiver name */
+	unsigned 	power_budget;	/* for hcd->power_budget */
+	u32		id_gpio;
+
+	struct fsl_xcvr_ops *xcvr_ops;
+	struct fsl_xcvr_power *xcvr_pwr;
+	int (*gpio_usb_active) (void);
+	void (*gpio_usb_inactive) (void);
+	void (*usb_clock_for_pm) (bool);
+	void (*platform_suspend)(struct fsl_usb2_platform_data *);
+	void (*platform_resume)(struct fsl_usb2_platform_data *);
+	void (*wake_up_enable)(struct fsl_usb2_platform_data *, bool);
+	void (*phy_lowpower_suspend)(struct fsl_usb2_platform_data *, bool);
+	void (*platform_driver_vbus)(bool on); /* for vbus shutdown/open */
+	enum usb_wakeup_event (*is_wakeup_event)(struct fsl_usb2_platform_data *);
+	void (*wakeup_handler)(struct fsl_usb2_platform_data *);
+
+	struct fsl_usb2_wakeup_platform_data *wakeup_pdata;
+	struct platform_device *pdev;
+	unsigned	change_ahb_burst:1;
+	unsigned	ahb_burst_mode:3;
+	unsigned	lowpower:1;
+	unsigned	irq_delay:1;
+	unsigned	wakeup_event:1;
+	u32		pmflags;	/* PM from otg or system */
+
 	/* register save area for suspend/resume */
 	u32		pm_command;
 	u32		pm_status;
@@ -97,6 +144,22 @@ struct fsl_usb2_platform_data {
 	u32		pm_usbgenctrl;
 };
 
+struct fsl_usb2_wakeup_platform_data {
+	char *name;
+	void (*usb_clock_for_pm) (bool);
+	void (*usb_wakeup_exhandle) (void);
+	struct fsl_usb2_platform_data *usb_pdata[3];
+	/* This waitqueue is used to wait "usb_wakeup thread" to finish
+	 * during system resume routine. "usb_wakeup theard" should be finished
+	 * prior to usb resume routine.
+	 */
+	wait_queue_head_t wq;
+	/* This flag is used to indicate the "usb_wakeup thread" is finished during
+	 * usb wakeup routine.
+	 */
+	bool usb_wakeup_is_pending;
+};
+
 /* Flags in fsl_usb2_mph_platform_data */
 #define FSL_USB2_PORT0_ENABLED	0x00000001
 #define FSL_USB2_PORT1_ENABLED	0x00000002
@@ -120,11 +183,101 @@ struct fsl_spi_platform_data {
 	u32	sysclk;
 };
 
+struct fsl_mxc_tve_platform_data {
+	char *dac_reg;
+	char *dig_reg;
+};
+
+struct fsl_mxc_ldb_platform_data {
+	char *lvds_bg_reg;
+	u32 ext_ref;
+};
+
+struct fsl_mxc_lcd_platform_data {
+	char *io_reg;
+	char *core_reg;
+	char *analog_reg;
+	void (*reset) (void);
+};
+
+struct fsl_mxc_ddc_platform_data {
+	u32 di;
+	void (*init) (void);
+	int (*update) (void);
+	char *analog_regulator;
+};
+
+struct fsl_mxc_camera_platform_data {
+	char *core_regulator;
+	char *io_regulator;
+	char *analog_regulator;
+	char *gpo_regulator;
+	u32 mclk;
+	u32 csi;
+	void (*pwdn)(int pwdn);
+};
+
 struct mpc8xx_pcmcia_ops {
 	void(*hw_ctrl)(int slot, int enable);
 	int(*voltage_set)(int slot, int vcc, int vpp);
 };
 
+struct mxc_pm_platform_data {
+	void (*suspend_enter) (void);
+	void (*suspend_exit) (void);
+};
+
+struct mxc_iim_platform_data {
+	const s8        *name;
+	u32     virt_base;
+	u32     reg_base;
+	u32     reg_end;
+	u32     reg_size;
+	u32     bank_start;
+	u32     bank_end;
+	u32     irq;
+	u32     action;
+	struct mutex mutex;
+	struct completion completion;
+	spinlock_t lock;
+	struct clk *clk;
+	struct device *dev;
+	void   (*enable_fuse)(void);
+	void   (*disable_fuse)(void);
+};
+
+struct mxc_otp_platform_data {
+	char    **fuse_name;
+	char    *regulator_name;
+	unsigned int    fuse_num;
+};
+
+/*
+ * This struct is to define the number of SSIs on a platform,
+ * DAM source port config, DAM external port config,
+ * regulator names, and other stuff audio needs.
+ */
+struct mxc_audio_platform_data {
+	int ssi_num;
+	int src_port;
+	int ext_port;
+
+	int intr_id_hp;
+	int ext_ram;
+	struct clk *ssi_clk[2];
+
+	int hp_irq;
+	int (*hp_status) (void);
+
+	int sysclk;
+
+	int (*init) (void);	/* board specific init */
+	int (*amp_enable) (int enable);
+	int (*clock_enable) (int enable);
+	int (*finit) (void);	/* board specific finit */
+	void *priv;		/* used by board specific functions */
+};
+
 /* Returns non-zero if the current suspend operation would
  * lead to a deep sleep (i.e. power removed from the core,
  * instead of just the clock).