summaryrefslogtreecommitdiff
path: root/include/linux/i2c.h
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2007-10-13 23:56:31 +0200
committerJean Delvare <khali@hyperion.delvare>2007-10-13 23:56:31 +0200
commita64ec07d3daeb7cdd363e66ed5929beacdd94652 (patch)
tree2b787bd509ba42c3ffeeaf84cedd0ca49ae1d6cb /include/linux/i2c.h
parent553515e5c54dbf3340cd6773aaf0acb53291d6ad (diff)
i2c: Document struct i2c_msg
Clarify use of the I2C_M_* flags by highlighting the fact that most of them depend on I2C_FUNC_PROTOCOL_MANGLING. Also provide kerneldoc for i2c_smbus_read_block_data() and also for "struct i2c_msg". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'include/linux/i2c.h')
-rw-r--r--include/linux/i2c.h51
1 files changed, 42 insertions, 9 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index d4b63171d5d5..8fc4310f071b 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -443,19 +443,52 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
}
#endif /* __KERNEL__ */
-/*
- * I2C Message - used for pure i2c transaction, also from /dev interface
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits. When this is a ten
+ * bit address, I2C_M_TEN must be set in @flags and the adapter
+ * must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters. No other flags may be
+ * provided unless the adapter exported the relevant I2C_FUNC_*
+ * flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ * I2C slave address. For read transactions where I2C_M_RECV_LEN
+ * is set, the caller guarantees that this buffer can hold up to
+ * 32 bytes in addition to the initial length byte sent by the
+ * slave (plus, if used, the SMBus PEC); and this value will be
+ * incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction. It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions. Each transaction begins with a
+ * START. That is followed by the slave address, and a bit encoding read
+ * versus write. Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC. The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed. If this is the last message in a
+ * group, it is followed by a STOP. Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
*/
struct i2c_msg {
__u16 addr; /* slave address */
__u16 flags;
-#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
-#define I2C_M_RD 0x01
-#define I2C_M_NOSTART 0x4000
-#define I2C_M_REV_DIR_ADDR 0x2000
-#define I2C_M_IGNORE_NAK 0x1000
-#define I2C_M_NO_RD_ACK 0x0800
-#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
+#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
+#define I2C_M_RD 0x0001 /* read data, from slave to master */
+#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
__u16 len; /* msg length */
__u8 *buf; /* pointer to msg data */
};