summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-18 09:24:01 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-18 09:24:01 -0800
commit53861af9a17022898619a2ae4ead0dfc601b7c13 (patch)
treedc11088d9e86fa1d8d8479974864153a8f976897 /tools
parent5c2770079fb9b8c5bfb7113d9e76de66e77a0e24 (diff)
parent5b40a7daf51812b35cf05d1601a779a7043f8414 (diff)
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
Diffstat (limited to 'tools')
-rw-r--r--tools/lguest/Makefile8
-rw-r--r--tools/lguest/lguest.c2016
2 files changed, 1684 insertions, 340 deletions
diff --git a/tools/lguest/Makefile b/tools/lguest/Makefile
index 97bca4871ea3..a107b5e4da13 100644
--- a/tools/lguest/Makefile
+++ b/tools/lguest/Makefile
@@ -1,7 +1,13 @@
# This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE -Iinclude
all: lguest
+include/linux/virtio_types.h: ../../include/uapi/linux/virtio_types.h
+ mkdir -p include/linux 2>&1 || true
+ ln -sf ../../../../include/uapi/linux/virtio_types.h $@
+
+lguest: include/linux/virtio_types.h
+
clean:
rm -f lguest
diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c
index 32cf2ce15d69..e44052483ed9 100644
--- a/tools/lguest/lguest.c
+++ b/tools/lguest/lguest.c
@@ -41,6 +41,8 @@
#include <signal.h>
#include <pwd.h>
#include <grp.h>
+#include <sys/user.h>
+#include <linux/pci_regs.h>
#ifndef VIRTIO_F_ANY_LAYOUT
#define VIRTIO_F_ANY_LAYOUT 27
@@ -61,12 +63,19 @@ typedef uint16_t u16;
typedef uint8_t u8;
/*:*/
-#include <linux/virtio_config.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_blk.h>
-#include <linux/virtio_console.h>
-#include <linux/virtio_rng.h>
+#define VIRTIO_CONFIG_NO_LEGACY
+#define VIRTIO_PCI_NO_LEGACY
+#define VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_NET_NO_LEGACY
+
+/* Use in-kernel ones, which defines VIRTIO_F_VERSION_1 */
+#include "../../include/uapi/linux/virtio_config.h"
+#include "../../include/uapi/linux/virtio_net.h"
+#include "../../include/uapi/linux/virtio_blk.h"
+#include "../../include/uapi/linux/virtio_console.h"
+#include "../../include/uapi/linux/virtio_rng.h"
#include <linux/virtio_ring.h>
+#include "../../include/uapi/linux/virtio_pci.h"
#include <asm/bootparam.h>
#include "../../include/linux/lguest_launcher.h"
@@ -91,13 +100,16 @@ static bool verbose;
/* The pointer to the start of guest memory. */
static void *guest_base;
/* The maximum guest physical address allowed, and maximum possible. */
-static unsigned long guest_limit, guest_max;
+static unsigned long guest_limit, guest_max, guest_mmio;
/* The /dev/lguest file descriptor. */
static int lguest_fd;
/* a per-cpu variable indicating whose vcpu is currently running */
static unsigned int __thread cpu_id;
+/* 5 bit device number in the PCI_CONFIG_ADDR => 32 only */
+#define MAX_PCI_DEVICES 32
+
/* This is our list of devices. */
struct device_list {
/* Counter to assign interrupt numbers. */
@@ -106,30 +118,50 @@ struct device_list {
/* Counter to print out convenient device numbers. */
unsigned int device_num;
- /* The descriptor page for the devices. */
- u8 *descpage;
-
- /* A single linked list of devices. */
- struct device *dev;
- /* And a pointer to the last device for easy append. */
- struct device *lastdev;
+ /* PCI devices. */
+ struct device *pci[MAX_PCI_DEVICES];
};
/* The list of Guest devices, based on command line arguments. */
static struct device_list devices;
-/* The device structure describes a single device. */
-struct device {
- /* The linked-list pointer. */
- struct device *next;
+struct virtio_pci_cfg_cap {
+ struct virtio_pci_cap cap;
+ u32 pci_cfg_data; /* Data for BAR access. */
+};
- /* The device's descriptor, as mapped into the Guest. */
- struct lguest_device_desc *desc;
+struct virtio_pci_mmio {
+ struct virtio_pci_common_cfg cfg;
+ u16 notify;
+ u8 isr;
+ u8 padding;
+ /* Device-specific configuration follows this. */
+};
- /* We can't trust desc values once Guest has booted: we use these. */
- unsigned int feature_len;
- unsigned int num_vq;
+/* This is the layout (little-endian) of the PCI config space. */
+struct pci_config {
+ u16 vendor_id, device_id;
+ u16 command, status;
+ u8 revid, prog_if, subclass, class;
+ u8 cacheline_size, lat_timer, header_type, bist;
+ u32 bar[6];
+ u32 cardbus_cis_ptr;
+ u16 subsystem_vendor_id, subsystem_device_id;
+ u32 expansion_rom_addr;
+ u8 capabilities, reserved1[3];
+ u32 reserved2;
+ u8 irq_line, irq_pin, min_grant, max_latency;
+
+ /* Now, this is the linked capability list. */
+ struct virtio_pci_cap common;
+ struct virtio_pci_notify_cap notify;
+ struct virtio_pci_cap isr;
+ struct virtio_pci_cap device;
+ struct virtio_pci_cfg_cap cfg_access;
+};
+/* The device structure describes a single device. */
+struct device {
/* The name of this device, for --verbose. */
const char *name;
@@ -139,6 +171,25 @@ struct device {
/* Is it operational */
bool running;
+ /* Has it written FEATURES_OK but not re-checked it? */
+ bool wrote_features_ok;
+
+ /* PCI configuration */
+ union {
+ struct pci_config config;
+ u32 config_words[sizeof(struct pci_config) / sizeof(u32)];
+ };
+
+ /* Features we offer, and those accepted. */
+ u64 features, features_accepted;
+
+ /* Device-specific config hangs off the end of this. */
+ struct virtio_pci_mmio *mmio;
+
+ /* PCI MMIO resources (all in BAR0) */
+ size_t mmio_size;
+ u32 mmio_addr;
+
/* Device-specific data. */
void *priv;
};
@@ -150,12 +201,15 @@ struct virtqueue {
/* Which device owns me. */
struct device *dev;
- /* The configuration for this queue. */
- struct lguest_vqconfig config;
+ /* Name for printing errors. */
+ const char *name;
/* The actual ring of buffers. */
struct vring vring;
+ /* The information about this virtqueue (we only use queue_size on) */
+ struct virtio_pci_common_cfg pci_config;
+
/* Last available index we saw. */
u16 last_avail_idx;
@@ -199,6 +253,16 @@ static struct termios orig_term;
#define le32_to_cpu(v32) (v32)
#define le64_to_cpu(v64) (v64)
+/*
+ * A real device would ignore weird/non-compliant driver behaviour. We
+ * stop and flag it, to help debugging Linux problems.
+ */
+#define bad_driver(d, fmt, ...) \
+ errx(1, "%s: bad driver: " fmt, (d)->name, ## __VA_ARGS__)
+#define bad_driver_vq(vq, fmt, ...) \
+ errx(1, "%s vq %s: bad driver: " fmt, (vq)->dev->name, \
+ vq->name, ## __VA_ARGS__)
+
/* Is this iovec empty? */
static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
{
@@ -211,7 +275,8 @@ static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
}
/* Take len bytes from the front of this iovec. */
-static void iov_consume(struct iovec iov[], unsigned num_iov,
+static void iov_consume(struct device *d,
+ struct iovec iov[], unsigned num_iov,
void *dest, unsigned len)
{
unsigned int i;
@@ -229,14 +294,7 @@ static void iov_consume(struct iovec iov[], unsigned num_iov,
len -= used;
}
if (len != 0)
- errx(1, "iovec too short!");
-}
-
-/* The device virtqueue descriptors are followed by feature bitmasks. */
-static u8 *get_feature_bits(struct device *dev)
-{
- return (u8 *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig);
+ bad_driver(d, "iovec too short!");
}
/*L:100
@@ -309,14 +367,20 @@ static void *map_zeroed_pages(unsigned int num)
return addr + getpagesize();
}
-/* Get some more pages for a device. */
-static void *get_pages(unsigned int num)
+/* Get some bytes which won't be mapped into the guest. */
+static unsigned long get_mmio_region(size_t size)
{
- void *addr = from_guest_phys(guest_limit);
+ unsigned long addr = guest_mmio;
+ size_t i;
+
+ if (!size)
+ return addr;
+
+ /* Size has to be a power of 2 (and multiple of 16) */
+ for (i = 1; i < size; i <<= 1);
+
+ guest_mmio += i;
- guest_limit += num * getpagesize();
- if (guest_limit > guest_max)
- errx(1, "Not enough memory for devices");
return addr;
}
@@ -547,9 +611,11 @@ static void tell_kernel(unsigned long start)
{
unsigned long args[] = { LHREQ_INITIALIZE,
(unsigned long)guest_base,
- guest_limit / getpagesize(), start };
- verbose("Guest: %p - %p (%#lx)\n",
- guest_base, guest_base + guest_limit, guest_limit);
+ guest_limit / getpagesize(), start,
+ (guest_mmio+getpagesize()-1) / getpagesize() };
+ verbose("Guest: %p - %p (%#lx, MMIO %#lx)\n",
+ guest_base, guest_base + guest_limit,
+ guest_limit, guest_mmio);
lguest_fd = open_or_die("/dev/lguest", O_RDWR);
if (write(lguest_fd, args, sizeof(args)) < 0)
err(1, "Writing to /dev/lguest");
@@ -564,7 +630,8 @@ static void tell_kernel(unsigned long start)
* we have a convenient routine which checks it and exits with an error message
* if something funny is going on:
*/
-static void *_check_pointer(unsigned long addr, unsigned int size,
+static void *_check_pointer(struct device *d,
+ unsigned long addr, unsigned int size,
unsigned int line)
{
/*
@@ -572,7 +639,8 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
* or addr + size wraps around.
*/
if ((addr + size) > guest_limit || (addr + size) < addr)
- errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
+ bad_driver(d, "%s:%i: Invalid address %#lx",
+ __FILE__, line, addr);
/*
* We return a pointer for the caller's convenience, now we know it's
* safe to use.
@@ -580,14 +648,14 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
return from_guest_phys(addr);
}
/* A macro which transparently hands the line number to the real function. */
-#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
+#define check_pointer(d,addr,size) _check_pointer(d, addr, size, __LINE__)
/*
* Each buffer in the virtqueues is actually a chain of descriptors. This
* function returns the next descriptor in the chain, or vq->vring.num if we're
* at the end.
*/
-static unsigned next_desc(struct vring_desc *desc,
+static unsigned next_desc(struct device *d, struct vring_desc *desc,
unsigned int i, unsigned int max)
{
unsigned int next;
@@ -602,7 +670,7 @@ static unsigned next_desc(struct vring_desc *desc,
wmb();
if (next >= max)
- errx(1, "Desc next is %u", next);
+ bad_driver(d, "Desc next is %u", next);
return next;
}
@@ -613,21 +681,48 @@ static unsigned next_desc(struct vring_desc *desc,
*/
static void trigger_irq(struct virtqueue *vq)
{
- unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+ unsigned long buf[] = { LHREQ_IRQ, vq->dev->config.irq_line };
/* Don't inform them if nothing used. */
if (!vq->pending_used)
return;
vq->pending_used = 0;
- /* If they don't want an interrupt, don't send one... */
+ /*
+ * 2.4.7.1:
+ *
+ * If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+ * The driver MUST set flags to 0 or 1.
+ */
+ if (vq->vring.avail->flags > 1)
+ bad_driver_vq(vq, "avail->flags = %u\n", vq->vring.avail->flags);
+
+ /*
+ * 2.4.7.2:
+ *
+ * If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+ *
+ * - The device MUST ignore the used_event value.
+ * - After the device writes a descriptor index into the used ring:
+ * - If flags is 1, the device SHOULD NOT send an interrupt.
+ * - If flags is 0, the device MUST send an interrupt.
+ */
if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
return;
}
+ /*
+ * 4.1.4.5.1:
+ *
+ * If MSI-X capability is disabled, the device MUST set the Queue
+ * Interrupt bit in ISR status before sending a virtqueue notification
+ * to the driver.
+ */
+ vq->dev->mmio->isr = 0x1;
+
/* Send the Guest an interrupt tell them we used something up. */
if (write(lguest_fd, buf, sizeof(buf)) != 0)
- err(1, "Triggering irq %i", vq->config.irq);
+ err(1, "Triggering irq %i", vq->dev->config.irq_line);
}
/*
@@ -646,6 +741,14 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
struct vring_desc *desc;
u16 last_avail = lg_last_avail(vq);
+ /*
+ * 2.4.7.1:
+ *
+ * The driver MUST handle spurious interrupts from the device.
+ *
+ * That's why this is a while loop.
+ */
+
/* There's nothing available? */
while (last_avail == vq->vring.avail->idx) {
u64 event;
@@ -679,8 +782,8 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
/* Check it isn't doing very strange things with descriptor numbers. */
if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
- errx(1, "Guest moved used index from %u to %u",
- last_avail, vq->vring.avail->idx);
+ bad_driver_vq(vq, "Guest moved used index from %u to %u",
+ last_avail, vq->vring.avail->idx);
/*
* Make sure we read the descriptor number *after* we read the ring
@@ -697,7 +800,7 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
/* If their number is silly, that's a fatal mistake. */
if (head >= vq->vring.num)
- errx(1, "Guest says index %u is available", head);
+ bad_driver_vq(vq, "Guest says index %u is available", head);
/* When we start there are none of either input nor output. */
*out_num = *in_num = 0;
@@ -712,24 +815,73 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
* that: no rmb() required.
*/
- /*
- * If this is an indirect entry, then this buffer contains a descriptor
- * table which we handle as if it's any normal descriptor chain.
- */
- if (desc[i].flags & VRING_DESC_F_INDIRECT) {
- if (desc[i].len % sizeof(struct vring_desc))
- errx(1, "Invalid size for indirect buffer table");
+ do {
+ /*
+ * If this is an indirect entry, then this buffer contains a
+ * descriptor table which we handle as if it's any normal
+ * descriptor chain.
+ */
+ if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+ /* 2.4.5.3.1:
+ *
+ * The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+ * flag unless the VIRTIO_F_INDIRECT_DESC feature was
+ * negotiated.
+ */
+ if (!(vq->dev->features_accepted &
+ (1<<VIRTIO_RING_F_INDIRECT_DESC)))
+ bad_driver_vq(vq, "vq indirect not negotiated");
- max = desc[i].len / sizeof(struct vring_desc);
- desc = check_pointer(desc[i].addr, desc[i].len);
- i = 0;
- }
+ /*
+ * 2.4.5.3.1:
+ *
+ * The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+ * flag within an indirect descriptor (ie. only one
+ * table per descriptor).
+ */
+ if (desc != vq->vring.desc)
+ bad_driver_vq(vq, "Indirect within indirect");
+
+ /*
+ * Proposed update VIRTIO-134 spells this out:
+ *
+ * A driver MUST NOT set both VIRTQ_DESC_F_INDIRECT
+ * and VIRTQ_DESC_F_NEXT in flags.
+ */
+ if (desc[i].flags & VRING_DESC_F_NEXT)
+ bad_driver_vq(vq, "indirect and next together");
+
+ if (desc[i].len % sizeof(struct vring_desc))
+ bad_driver_vq(vq,
+ "Invalid size for indirect table");
+ /*
+ * 2.4.5.3.2:
+ *
+ * The device MUST ignore the write-only flag
+ * (flags&VIRTQ_DESC_F_WRITE) in the descriptor that
+ * refers to an indirect table.
+ *
+ * We ignore it here: :)
+ */
+
+ max = desc[i].len / sizeof(struct vring_desc);
+ desc = check_pointer(vq->dev, desc[i].addr, desc[i].len);
+ i = 0;
+
+ /* 2.4.5.3.1:
+ *
+ * A driver MUST NOT create a descriptor chain longer
+ * than the Queue Size of the device.
+ */
+ if (max > vq->pci_config.queue_size)
+ bad_driver_vq(vq,
+ "indirect has too many entries");
+ }
- do {
/* Grab the first descriptor, and check it's OK. */
iov[*out_num + *in_num].iov_len = desc[i].len;
iov[*out_num + *in_num].iov_base
- = check_pointer(desc[i].addr, desc[i].len);
+ = check_pointer(vq->dev, desc[i].addr, desc[i].len);
/* If this is an input descriptor, increment that count. */
if (desc[i].flags & VRING_DESC_F_WRITE)
(*in_num)++;
@@ -739,14 +891,15 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
* to come before any input descriptors.
*/
if (*in_num)
- errx(1, "Descriptor has out after in");
+ bad_driver_vq(vq,
+ "Descriptor has out after in");
(*out_num)++;
}
/* If we've got too many, that implies a descriptor loop. */
if (*out_num + *in_num > max)
- errx(1, "Looped descriptor");
- } while ((i = next_desc(desc, i, max)) != max);
+ bad_driver_vq(vq, "Looped descriptor");
+ } while ((i = next_desc(vq->dev, desc, i, max)) != max);
return head;
}
@@ -803,7 +956,7 @@ static void console_input(struct virtqueue *vq)
/* Make sure there's a descriptor available. */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
if (out_num)
- errx(1, "Output buffers in console in queue?");
+ bad_driver_vq(vq, "Output buffers in console in queue?");
/* Read into it. This is where we usually wait. */
len = readv(STDIN_FILENO, iov, in_num);
@@ -856,7 +1009,7 @@ static void console_output(struct virtqueue *vq)
/* We usually wait in here, for the Guest to give us something. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
- errx(1, "Input buffers in console output queue?");
+ bad_driver_vq(vq, "Input buffers in console output queue?");
/* writev can return a partial write, so we loop here. */
while (!iov_empty(iov, out)) {
@@ -865,7 +1018,7 @@ static void console_output(struct virtqueue *vq)
warn("Write to stdout gave %i (%d)", len, errno);
break;
}
- iov_consume(iov, out, NULL, len);
+ iov_consume(vq->dev, iov, out, NULL, len);
}
/*
@@ -894,7 +1047,7 @@ static void net_output(struct virtqueue *vq)
/* We usually wait in here for the Guest to give us a packet. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
- errx(1, "Input buffers in net output queue?");
+ bad_driver_vq(vq, "Input buffers in net output queue?");
/*
* Send the whole thing through to /dev/net/tun. It expects the exact
* same format: what a coincidence!
@@ -942,7 +1095,7 @@ static void net_input(struct virtqueue *vq)
*/
head = wait_for_vq_desc(vq, iov, &out, &in);
if (out)
- errx(1, "Output buffers in net input queue?");
+ bad_driver_vq(vq, "Output buffers in net input queue?");
/*
* If it looks like we'll block reading from the tun device, send them
@@ -986,6 +1139,12 @@ static void kill_launcher(int signal)
kill(0, SIGTERM);
}
+static void reset_vq_pci_config(struct virtqueue *vq)
+{
+ vq->pci_config.queue_size = VIRTQUEUE_NUM;
+ vq->pci_config.queue_enable = 0;
+}
+
static void reset_device(struct device *dev)
{
struct virtqueue *vq;
@@ -993,53 +1152,705 @@ static void reset_device(struct device *dev)
verbose("Resetting device %s\n", dev->name);
/* Clear any features they've acked. */
- memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
+ dev->features_accepted = 0;
/* We're going to be explicitly killing threads, so ignore them. */
signal(SIGCHLD, SIG_IGN);
- /* Zero out the virtqueues, get rid of their threads */
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST present a 0 in queue_enable on reset.
+ *
+ * This means we set it here, and reset the saved ones in every vq.
+ */
+ dev->mmio->cfg.queue_enable = 0;
+
+ /* Get rid of the virtqueue threads */
for (vq = dev->vq; vq; vq = vq->next) {
+ vq->last_avail_idx = 0;
+ reset_vq_pci_config(vq);
if (vq->thread != (pid_t)-1) {
kill(vq->thread, SIGTERM);
waitpid(vq->thread, NULL, 0);
vq->thread = (pid_t)-1;
}
- memset(vq->vring.desc, 0,
- vring_size(vq->config.num, LGUEST_VRING_ALIGN));
- lg_last_avail(vq) = 0;
}
dev->running = false;
+ dev->wrote_features_ok = false;
/* Now we care if threads die. */
signal(SIGCHLD, (void *)kill_launcher);
}
+static void cleanup_devices(void)
+{
+ unsigned int i;
+
+ for (i = 1; i < MAX_PCI_DEVICES; i++) {
+ struct device *d = devices.pci[i];
+ if (!d)
+ continue;
+ reset_device(d);
+ }
+
+ /* If we saved off the original terminal settings, restore them now. */
+ if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+ tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
+}
+
+/*L:217
+ * We do PCI. This is mainly done to let us test the kernel virtio PCI
+ * code.
+ */
+
+/* Linux expects a PCI host bridge: ours is a dummy, and first on the bus. */
+static struct device pci_host_bridge;
+
+static void init_pci_host_bridge(void)
+{
+ pci_host_bridge.name = "PCI Host Bridge";
+ pci_host_bridge.config.class = 0x06; /* bridge */
+ pci_host_bridge.config.subclass = 0; /* host bridge */
+ devices.pci[0] = &pci_host_bridge;
+}
+
+/* The IO ports used to read the PCI config space. */
+#define PCI_CONFIG_ADDR 0xCF8
+#define PCI_CONFIG_DATA 0xCFC
+
+/*
+ * Not really portable, but does help readability: this is what the Guest
+ * writes to the PCI_CONFIG_ADDR IO port.
+ */
+union pci_config_addr {
+ struct {
+ unsigned mbz: 2;
+ unsigned offset: 6;
+ unsigned funcnum: 3;
+ unsigned devnum: 5;
+ unsigned busnum: 8;
+ unsigned reserved: 7;
+ unsigned enabled : 1;
+ } bits;
+ u32 val;
+};
+
+/*
+ * We cache what they wrote to the address port, so we know what they're
+ * talking about when they access the data port.
+ */
+static union pci_config_addr pci_config_addr;
+
+static struct device *find_pci_device(unsigned int index)
+{
+ return devices.pci[index];
+}
+
+/* PCI can do 1, 2 and 4 byte reads; we handle that here. */
+static void ioread(u16 off, u32 v, u32 mask, u32 *val)
+{
+ assert(off < 4);
+ assert(mask == 0xFF || mask == 0xFFFF || mask == 0xFFFFFFFF);
+ *val = (v >> (off * 8)) & mask;
+}
+
+/* PCI can do 1, 2 and 4 byte writes; we handle that here. */
+static void iowrite(u16 off, u32 v, u32 mask, u32 *dst)
+{
+ assert(off < 4);
+ assert(mask == 0xFF || mask == 0xFFFF || mask == 0xFFFFFFFF);
+ *dst &= ~(mask << (off * 8));
+ *dst |= (v & mask) << (off * 8);
+}
+
+/*
+ * Where PCI_CONFIG_DATA accesses depends on the previous write to
+ * PCI_CONFIG_ADDR.
+ */
+static struct device *dev_and_reg(u32 *reg)
+{
+ if (!pci_config_addr.bits.enabled)
+ return NULL;
+
+ if (pci_config_addr.bits.funcnum != 0)
+ return NULL;
+
+ if (pci_config_addr.bits.busnum != 0)
+ return NULL;
+
+ if (pci_config_addr.bits.offset * 4 >= sizeof(struct pci_config))
+ return NULL;
+
+ *reg = pci_config_addr.bits.offset;
+ return find_pci_device(pci_config_addr.bits.devnum);
+}
+
+/*
+ * We can get invalid combinations of values while they're writing, so we
+ * only fault if they try to write with some invalid bar/offset/length.
+ */
+static bool valid_bar_access(struct device *d,
+ struct virtio_pci_cfg_cap *cfg_access)
+{
+ /* We only have 1 bar (BAR0) */
+ if (cfg_access->cap.bar != 0)
+ return false;
+
+ /* Check it's within BAR0. */
+ if (cfg_access->cap.offset >= d->mmio_size
+ || cfg_access->cap.offset + cfg_access->cap.length > d->mmio_size)
+ return false;
+
+ /* Check length is 1, 2 or 4. */
+ if (cfg_access->cap.length != 1
+ && cfg_access->cap.length != 2
+ && cfg_access->cap.length != 4)
+ return false;
+
+ /*
+ * 4.1.4.7.2:
+ *
+ * The driver MUST NOT write a cap.offset which is not a multiple of
+ * cap.length (ie. all accesses MUST be aligned).
+ */
+ if (cfg_access->cap.offset % cfg_access->cap.length != 0)
+ return false;
+
+ /* Return pointer into word in BAR0. */
+ return true;
+}
+
+/* Is this accessing the PCI config address port?. */
+static bool is_pci_addr_port(u16 port)
+{
+ return port >= PCI_CONFIG_ADDR && port < PCI_CONFIG_ADDR + 4;
+}
+
+static bool pci_addr_iowrite(u16 port, u32 mask, u32 val)
+{
+ iowrite(port - PCI_CONFIG_ADDR, val, mask,
+ &pci_config_addr.val);
+ verbose("PCI%s: %#x/%x: bus %u dev %u func %u reg %u\n",
+ pci_config_addr.bits.enabled ? "" : " DISABLED",
+ val, mask,
+ pci_config_addr.bits.busnum,
+ pci_config_addr.bits.devnum,
+ pci_config_addr.bits.funcnum,
+ pci_config_addr.bits.offset);
+ return true;
+}
+
+static void pci_addr_ioread(u16 port, u32 mask, u32 *val)
+{
+ ioread(port - PCI_CONFIG_ADDR, pci_config_addr.val, mask, val);
+}
+
+/* Is this accessing the PCI config data port?. */
+static bool is_pci_data_port(u16 port)
+{
+ return port >= PCI_CONFIG_DATA && port < PCI_CONFIG_DATA + 4;
+}
+
+static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask);
+
+static bool pci_data_iowrite(u16 port, u32 mask, u32 val)
+{
+ u32 reg, portoff;
+ struct device *d = dev_and_reg(&reg);
+
+ /* Complain if they don't belong to a device. */
+ if (!d)
+ return false;
+
+ /* They can do 1 byte writes, etc. */
+ portoff = port - PCI_CONFIG_DATA;
+
+ /*
+ * PCI uses a weird way to determine the BAR size: the OS
+ * writes all 1's, and sees which ones stick.
+ */
+ if (&d->config_words[reg] == &d->config.bar[0]) {
+ int i;
+
+ iowrite(portoff, val, mask, &d->config.bar[0]);
+ for (i = 0; (1 << i) < d->mmio_size; i++)
+ d->config.bar[0] &= ~(1 << i);
+ return true;
+ } else if ((&d->config_words[reg] > &d->config.bar[0]
+ && &d->config_words[reg] <= &d->config.bar[6])
+ || &d->config_words[reg] == &d->config.expansion_rom_addr) {
+ /* Allow writing to any other BAR, or expansion ROM */
+ iowrite(portoff, val, mask, &d->config_words[reg]);
+ return true;
+ /* We let them overide latency timer and cacheline size */
+ } else if (&d->config_words[reg] == (void *)&d->config.cacheline_size) {
+ /* Only let them change the first two fields. */
+ if (mask == 0xFFFFFFFF)
+ mask = 0xFFFF;
+ iowrite(portoff, val, mask, &d->config_words[reg]);
+ return true;
+ } else if (&d->config_words[reg] == (void *)&d->config.command
+ && mask == 0xFFFF) {
+ /* Ignore command writes. */
+ return true;
+ } else if (&d->config_words[reg]
+ == (void *)&d->config.cfg_access.cap.bar
+ || &d->config_words[reg]
+ == &d->config.cfg_access.cap.length
+ || &d->config_words[reg]
+ == &d->config.cfg_access.cap.offset) {
+
+ /*
+ * The VIRTIO_PCI_CAP_PCI_CFG capability
+ * provides a backdoor to access the MMIO
+ * regions without mapping them. Weird, but
+ * useful.
+ */
+ iowrite(portoff, val, mask, &d->config_words[reg]);
+ return true;
+ } else if (&d->config_words[reg] == &d->config.cfg_access.pci_cfg_data) {
+ u32 write_mask;
+
+ /*
+ * 4.1.4.7.1:
+ *
+ * Upon detecting driver write access to pci_cfg_data, the
+ * device MUST execute a write access at offset cap.offset at
+ * BAR selected by cap.bar using the first cap.length bytes
+ * from pci_cfg_data.
+ */
+
+ /* Must be bar 0 */
+ if (!valid_bar_access(d, &d->config.cfg_access))
+ return false;
+
+ iowrite(portoff, val, mask, &d->config.cfg_access.pci_cfg_data);
+
+ /*
+ * Now emulate a write. The mask we use is set by
+ * len, *not* this write!
+ */
+ write_mask = (1ULL<<(8*d->config.cfg_access.cap.length)) - 1;
+ verbose("Window writing %#x/%#x to bar %u, offset %u len %u\n",
+ d->config.cfg_access.pci_cfg_data, write_mask,
+ d->config.cfg_access.cap.bar,
+ d->config.cfg_access.cap.offset,
+ d->config.cfg_access.cap.length);
+
+ emulate_mmio_write(d, d->config.cfg_access.cap.offset,
+ d->config.cfg_access.pci_cfg_data,
+ write_mask);
+ return true;
+ }
+
+ /*
+ * 4.1.4.1:
+ *
+ * The driver MUST NOT write into any field of the capability
+ * structure, with the exception of those with cap_type
+ * VIRTIO_PCI_CAP_PCI_CFG...
+ */
+ return false;
+}
+
+static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask);
+
+static void pci_data_ioread(u16 port, u32 mask, u32 *val)
+{
+ u32 reg;
+ struct device *d = dev_and_reg(&reg);
+
+ if (!d)
+ return;
+
+ /* Read through the PCI MMIO access window is special */
+ if (&d->config_words[reg] == &d->config.cfg_access.pci_cfg_data) {
+ u32 read_mask;
+
+ /*
+ * 4.1.4.7.1:
+ *
+ * Upon detecting driver read access to pci_cfg_data, the
+ * device MUST execute a read access of length cap.length at
+ * offset cap.offset at BAR selected by cap.bar and store the
+ * first cap.length bytes in pci_cfg_data.
+ */
+ /* Must be bar 0 */
+ if (!valid_bar_access(d, &d->config.cfg_access))
+ bad_driver(d,
+ "Invalid cfg_access to bar%u, offset %u len %u",
+ d->config.cfg_access.cap.bar,
+ d->config.cfg_access.cap.offset,
+ d->config.cfg_access.cap.length);
+
+ /*
+ * Read into the window. The mask we use is set by
+ * len, *not* this read!
+ */
+ read_mask = (1ULL<<(8*d->config.cfg_access.cap.length))-1;
+ d->config.cfg_access.pci_cfg_data
+ = emulate_mmio_read(d,
+ d->config.cfg_access.cap.offset,
+ read_mask);
+ verbose("Window read %#x/%#x from bar %u, offset %u len %u\n",
+ d->config.cfg_access.pci_cfg_data, read_mask,
+ d->config.cfg_access.cap.bar,
+ d->config.cfg_access.cap.offset,
+ d->config.cfg_access.cap.length);
+ }
+ ioread(port - PCI_CONFIG_DATA, d->config_words[reg], mask, val);
+}
+
/*L:216
- * This actually creates the thread which services the virtqueue for a device.
+ * This is where we emulate a handful of Guest instructions. It's ugly
+ * and we used to do it in the kernel but it grew over time.
+ */
+
+/*
+ * We use the ptrace syscall's pt_regs struct to talk about registers
+ * to lguest: these macros convert the names to the offsets.
+ */
+#define getreg(name) getreg_off(offsetof(struct user_regs_struct, name))
+#define setreg(name, val) \
+ setreg_off(offsetof(struct user_regs_struct, name), (val))
+
+static u32 getreg_off(size_t offset)
+{
+ u32 r;
+ unsigned long args[] = { LHREQ_GETREG, offset };
+
+ if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+ err(1, "Getting register %u", offset);
+ if (pread(lguest_fd, &r, sizeof(r), cpu_id) != sizeof(r))
+ err(1, "Reading register %u", offset);
+
+ return r;
+}
+
+static void setreg_off(size_t offset, u32 val)
+{
+ unsigned long args[] = { LHREQ_SETREG, offset, val };
+
+ if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+ err(1, "Setting register %u", offset);
+}
+
+/* Get register by instruction encoding */
+static u32 getreg_num(unsigned regnum, u32 mask)
+{
+ /* 8 bit ops use regnums 4-7 for high parts of word */
+ if (mask == 0xFF && (regnum & 0x4))
+ return getreg_num(regnum & 0x3, 0xFFFF) >> 8;
+
+ switch (regnum) {
+ case 0: return getreg(eax) & mask;
+ case 1: return getreg(ecx) & mask;
+ case 2: return getreg(edx) & mask;
+ case 3: return getreg(ebx) & mask;
+ case 4: return getreg(esp) & mask;
+ case 5: return getreg(ebp) & mask;
+ case 6: return getreg(esi) & mask;
+ case 7: return getreg(edi) & mask;
+ }
+ abort();
+}
+
+/* Set register by instruction encoding */
+static void setreg_num(unsigned regnum, u32 val, u32 mask)
+{
+ /* Don't try to set bits out of range */
+ assert(~(val & ~mask));
+
+ /* 8 bit ops use regnums 4-7 for high parts of word */
+ if (mask == 0xFF && (regnum & 0x4)) {
+ /* Construct the 16 bits we want. */
+ val = (val << 8) | getreg_num(regnum & 0x3, 0xFF);
+ setreg_num(regnum & 0x3, val, 0xFFFF);
+ return;
+ }
+
+ switch (regnum) {
+ case 0: setreg(eax, val | (getreg(eax) & ~mask)); return;
+ case 1: setreg(ecx, val | (getreg(ecx) & ~mask)); return;
+ case 2: setreg(edx, val | (getreg(edx) & ~mask)); return;
+ case 3: setreg(ebx, val | (getreg(ebx) & ~mask)); return;
+ case 4: setreg(esp, val | (getreg(esp) & ~mask)); return;
+ case 5: setreg(ebp, val | (getreg(ebp) & ~mask)); return;
+ case 6: setreg(esi, val | (getreg(esi) & ~mask)); return;
+ case 7: setreg(edi, val | (getreg(edi) & ~mask)); return;
+ }
+ abort();
+}
+
+/* Get bytes of displacement appended to instruction, from r/m encoding */
+static u32 insn_displacement_len(u8 mod_reg_rm)
+{
+ /* Switch on the mod bits */
+ switch (mod_reg_rm >> 6) {
+ case 0:
+ /* If mod == 0, and r/m == 101, 16-bit displacement follows */
+ if ((mod_reg_rm & 0x7) == 0x5)
+ return 2;
+ /* Normally, mod == 0 means no literal displacement */
+ return 0;
+ case 1:
+ /* One byte displacement */
+ return 1;
+ case 2:
+ /* Four byte displacement */
+ return 4;
+ case 3:
+ /* Register mode */
+ return 0;
+ }
+ abort();
+}
+
+static void emulate_insn(const u8 insn[])
+{
+ unsigned long args[] = { LHREQ_TRAP, 13 };
+ unsigned int insnlen = 0, in = 0, small_operand = 0, byte_access;
+ unsigned int eax, port, mask;
+ /*
+ * Default is to return all-ones on IO port reads, which traditionally
+ * means "there's nothing there".
+ */
+ u32 val = 0xFFFFFFFF;
+
+ /*
+ * This must be the Guest kernel trying to do something, not userspace!
+ * The bottom two bits of the CS segment register are the privilege
+ * level.
+ */
+ if ((getreg(xcs) & 3) != 0x1)
+ goto no_emulate;
+
+ /* Decoding x86 instructions is icky. */
+
+ /*
+ * Around 2.6.33, the kernel started using an emulation for the
+ * cmpxchg8b instruction in early boot on many configurations. This
+ * code isn't paravirtualized, and it tries to disable interrupts.
+ * Ignore it, which will Mostly Work.
+ */
+ if (insn[insnlen] == 0xfa) {
+ /* "cli", or Clear Interrupt Enable instruction. Skip it. */
+ insnlen = 1;
+ goto skip_insn;
+ }
+
+ /*
+ * 0x66 is an "operand prefix". It means a 16, not 32 bit in/out.
+ */
+ if (insn[insnlen] == 0x66) {
+ small_operand = 1;
+ /* The instruction is 1 byte so far, read the next byte. */
+ insnlen = 1;
+ }
+
+ /* If the lower bit isn't set, it's a single byte access */
+ byte_access = !(insn[insnlen] & 1);
+
+ /*
+ * Now we can ignore the lower bit and decode the 4 opcodes
+ * we need to emulate.
+ */
+ switch (insn[insnlen] & 0xFE) {
+ case 0xE4: /* in <next byte>,%al */
+ port = insn[insnlen+1];
+ insnlen += 2;
+ in = 1;
+ break;
+ case 0xEC: /* in (%dx),%al */
+ port = getreg(edx) & 0xFFFF;
+ insnlen += 1;
+ in = 1;
+ break;
+ case 0xE6: /* out %al,<next byte> */
+ port = insn[insnlen+1];
+ insnlen += 2;
+ break;
+ case 0xEE: /* out %al,(%dx) */
+ port = getreg(edx) & 0xFFFF;
+ insnlen += 1;
+ break;
+ default:
+ /* OK, we don't know what this is, can't emulate. */
+ goto no_emulate;
+ }
+
+ /* Set a mask of the 1, 2 or 4 bytes, depending on size of IO */
+ if (byte_access)
+ mask = 0xFF;
+ else if (small_operand)
+ mask = 0xFFFF;
+ else
+ mask = 0xFFFFFFFF;
+
+ /*
+ * If it was an "IN" instruction, they expect the result to be read
+ * into %eax, so we change %eax.
+ */
+ eax = getreg(eax);
+
+ if (in) {
+ /* This is the PS/2 keyboard status; 1 means ready for output */
+ if (port == 0x64)
+ val = 1;
+ else if (is_pci_addr_port(port))
+ pci_addr_ioread(port, mask, &val);
+ else if (is_pci_data_port(port))
+ pci_data_ioread(port, mask, &val);
+
+ /* Clear the bits we're about to read */
+ eax &= ~mask;
+ /* Copy bits in from val. */
+ eax |= val & mask;
+ /* Now update the register. */
+ setreg(eax, eax);
+ } else {
+ if (is_pci_addr_port(port)) {
+ if (!pci_addr_iowrite(port, mask, eax))
+ goto bad_io;
+ } else if (is_pci_data_port(port)) {
+ if (!pci_data_iowrite(port, mask, eax))
+ goto bad_io;
+ }
+ /* There are many other ports, eg. CMOS clock, serial
+ * and parallel ports, so we ignore them all. */
+ }
+
+ verbose("IO %s of %x to %u: %#08x\n",
+ in ? "IN" : "OUT", mask, port, eax);
+skip_insn:
+ /* Finally, we've "done" the instruction, so move past it. */
+ setreg(eip, getreg(eip) + insnlen);
+ return;
+
+bad_io:
+ warnx("Attempt to %s port %u (%#x mask)",
+ in ? "read from" : "write to", port, mask);
+
+no_emulate:
+ /* Inject trap into Guest. */
+ if (write(lguest_fd, args, sizeof(args)) < 0)
+ err(1, "Reinjecting trap 13 for fault at %#x", getreg(eip));
+}
+
+static struct device *find_mmio_region(unsigned long paddr, u32 *off)
+{
+ unsigned int i;
+
+ for (i = 1; i < MAX_PCI_DEVICES; i++) {
+ struct device *d = devices.pci[i];
+
+ if (!d)
+ continue;
+ if (paddr < d->mmio_addr)
+ continue;
+ if (paddr >= d->mmio_addr + d->mmio_size)
+ continue;
+ *off = paddr - d->mmio_addr;
+ return d;
+ }
+ return NULL;
+}
+
+/* FIXME: Use vq array. */
+static struct virtqueue *vq_by_num(struct device *d, u32 num)
+{
+ struct virtqueue *vq = d->vq;
+
+ while (num-- && vq)
+ vq = vq->next;
+
+ return vq;
+}
+
+static void save_vq_config(const struct virtio_pci_common_cfg *cfg,
+ struct virtqueue *vq)
+{
+ vq->pci_config = *cfg;
+}
+
+static void restore_vq_config(struct virtio_pci_common_cfg *cfg,
+ struct virtqueue *vq)
+{
+ /* Only restore the per-vq part */
+ size_t off = offsetof(struct virtio_pci_common_cfg, queue_size);
+
+ memcpy((void *)cfg + off, (void *)&vq->pci_config + off,
+ sizeof(*cfg) - off);
+}
+
+/*
+ * 4.1.4.3.2:
+ *
+ * The driver MUST configure the other virtqueue fields before
+ * enabling the virtqueue with queue_enable.
+ *
+ * When they enable the virtqueue, we check that their setup is valid.
*/
-static void create_thread(struct virtqueue *vq)
+static void check_virtqueue(struct device *d, struct virtqueue *vq)
+{
+ /* Because lguest is 32 bit, all the descriptor high bits must be 0 */
+ if (vq->pci_config.queue_desc_hi
+ || vq->pci_config.queue_avail_hi
+ || vq->pci_config.queue_used_hi)
+ bad_driver_vq(vq, "invalid 64-bit queue address");
+
+ /*
+ * 2.4.1:
+ *
+ * The driver MUST ensure that the physical address of the first byte
+ * of each virtqueue part is a multiple of the specified alignment
+ * value in the above table.
+ */
+ if (vq->pci_config.queue_desc_lo % 16
+ || vq->pci_config.queue_avail_lo % 2
+ || vq->pci_config.queue_used_lo % 4)
+ bad_driver_vq(vq, "invalid alignment in queue addresses");
+
+ /* Initialize the virtqueue and check they're all in range. */
+ vq->vring.num = vq->pci_config.queue_size;
+ vq->vring.desc = check_pointer(vq->dev,
+ vq->pci_config.queue_desc_lo,
+ sizeof(*vq->vring.desc) * vq->vring.num);
+ vq->vring.avail = check_pointer(vq->dev,
+ vq->pci_config.queue_avail_lo,
+ sizeof(*vq->vring.avail)
+ + (sizeof(vq->vring.avail->ring[0])
+ * vq->vring.num));
+ vq->vring.used = check_pointer(vq->dev,
+ vq->pci_config.queue_used_lo,
+ sizeof(*vq->vring.used)
+ + (sizeof(vq->vring.used->ring[0])
+ * vq->vring.num));
+
+ /*
+ * 2.4.9.1:
+ *
+ * The driver MUST initialize flags in the used ring to 0
+ * when allocating the used ring.
+ */
+ if (vq->vring.used->flags != 0)
+ bad_driver_vq(vq, "invalid initial used.flags %#x",
+ vq->vring.used->flags);
+}
+
+static void start_virtqueue(struct virtqueue *vq)
{
/*
* Create stack for thread. Since the stack grows upwards, we point
* the stack pointer to the end of this region.
*/
char *stack = malloc(32768);
- unsigned long args[] = { LHREQ_EVENTFD,
- vq->config.pfn*getpagesize(), 0 };
/* Create a zero-initialized eventfd. */
vq->eventfd = eventfd(0, 0);
if (vq->eventfd < 0)
err(1, "Creating eventfd");
- args[2] = vq->eventfd;
-
- /*
- * Attach an eventfd to this virtqueue: it will go off when the Guest
- * does an LHCALL_NOTIFY for this vq.
- */
- if (write(lguest_fd, &args, sizeof(args)) != 0)
- err(1, "Attaching eventfd");
/*
* CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
@@ -1048,167 +1859,531 @@ static void create_thread(struct virtqueue *vq)
vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
if (vq->thread == (pid_t)-1)
err(1, "Creating clone");
-
- /* We close our local copy now the child has it. */
- close(vq->eventfd);
}
-static void start_device(struct device *dev)
+static void start_virtqueues(struct device *d)
{
- unsigned int i;
struct virtqueue *vq;
- verbose("Device %s OK: offered", dev->name);
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)[i]);
- verbose(", accepted");
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)
- [dev->feature_len+i]);
-
- for (vq = dev->vq; vq; vq = vq->next) {
- if (vq->service)
- create_thread(vq);
+ for (vq = d->vq; vq; vq = vq->next) {
+ if (vq->pci_config.queue_enable)
+ start_virtqueue(vq);
}
- dev->running = true;
}
-static void cleanup_devices(void)
+static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
{
- struct device *dev;
+ struct virtqueue *vq;
- for (dev = devices.dev; dev; dev = dev->next)
- reset_device(dev);
+ switch (off) {
+ case offsetof(struct virtio_pci_mmio, cfg.device_feature_select):
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST present the feature bits it is offering in
+ * device_feature, starting at bit device_feature_select ∗ 32
+ * for any device_feature_select written by the driver
+ */
+ if (val == 0)
+ d->mmio->cfg.device_feature = d->features;
+ else if (val == 1)
+ d->mmio->cfg.device_feature = (d->features >> 32);
+ else
+ d->mmio->cfg.device_feature = 0;
+ goto feature_write_through32;
+ case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
+ if (val > 1)
+ bad_driver(d, "Unexpected driver select %u", val);
+ goto feature_write_through32;
+ case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
+ if (d->mmio->cfg.guest_feature_select == 0) {
+ d->features_accepted &= ~((u64)0xFFFFFFFF);
+ d->features_accepted |= val;
+ } else {
+ assert(d->mmio->cfg.guest_feature_select == 1);
+ d->features_accepted &= 0xFFFFFFFF;
+ d->features_accepted |= ((u64)val) << 32;
+ }
+ /*
+ * 2.2.1:
+ *
+ * The driver MUST NOT accept a feature which the device did
+ * not offer
+ */
+ if (d->features_accepted & ~d->features)
+ bad_driver(d, "over-accepted features %#llx of %#llx",
+ d->features_accepted, d->features);
+ goto feature_write_through32;
+ case offsetof(struct virtio_pci_mmio, cfg.device_status): {
+ u8 prev;
+
+ verbose("%s: device status -> %#x\n", d->name, val);
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST reset when 0 is written to device_status,
+ * and present a 0 in device_status once that is done.
+ */
+ if (val == 0) {
+ reset_device(d);
+ goto write_through8;
+ }
- /* If we saved off the original terminal settings, restore them now. */
- if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
- tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
+ /* 2.1.1: The driver MUST NOT clear a device status bit. */
+ if (d->mmio->cfg.device_status & ~val)
+ bad_driver(d, "unset of device status bit %#x -> %#x",
+ d->mmio->cfg.device_status, val);
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
-{
- /* A zero status is a reset, otherwise it's a set of flags. */
- if (dev->desc->status == 0)
- reset_device(dev);
- else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
- warnx("Device %s configuration FAILED", dev->name);
- if (dev->running)
- reset_device(dev);
- } else {
- if (dev->running)
- err(1, "Device %s features finalized twice", dev->name);
- start_device(dev);
+ /*
+ * 2.1.2:
+ *
+ * The device MUST NOT consume buffers or notify the driver
+ * before DRIVER_OK.
+ */
+ if (val & VIRTIO_CONFIG_S_DRIVER_OK
+ && !(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
+ start_virtqueues(d);
+
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ * - Reset the device.
+ * - Set the ACKNOWLEDGE status bit: the guest OS has
+ * notice the device.
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device. During this step the driver MAY
+ * read (but MUST NOT write) the device-specific
+ * configuration fields to check that it can
+ * support the device before accepting it.
+ * - Set the FEATURES_OK status bit. The driver
+ * MUST not accept new feature bits after this
+ * step.
+ * - Re-read device status to ensure the FEATURES_OK
+ * bit is still set: otherwise, the device does
+ * not support our subset of features and the
+ * device is unusable.
+ * - Perform device-specific setup, including
+ * discovery of virtqueues for the device,
+ * optional per-bus setup, reading and possibly
+ * writing the device’s virtio configuration
+ * space, and population of virtqueues.
+ * - Set the DRIVER_OK status bit. At this point the
+ * device is “live”.
+ */
+ prev = 0;
+ switch (val & ~d->mmio->cfg.device_status) {
+ case VIRTIO_CONFIG_S_DRIVER_OK:
+ prev |= VIRTIO_CONFIG_S_FEATURES_OK; /* fall thru */
+ case VIRTIO_CONFIG_S_FEATURES_OK:
+ prev |= VIRTIO_CONFIG_S_DRIVER; /* fall thru */
+ case VIRTIO_CONFIG_S_DRIVER:
+ prev |= VIRTIO_CONFIG_S_ACKNOWLEDGE; /* fall thru */
+ case VIRTIO_CONFIG_S_ACKNOWLEDGE:
+ break;
+ default:
+ bad_driver(d, "unknown device status bit %#x -> %#x",
+ d->mmio->cfg.device_status, val);
+ }
+ if (d->mmio->cfg.device_status != prev)
+ bad_driver(d, "unexpected status transition %#x -> %#x",
+ d->mmio->cfg.device_status, val);
+
+ /* If they just wrote FEATURES_OK, we make sure they read */
+ switch (val & ~d->mmio->cfg.device_status) {
+ case VIRTIO_CONFIG_S_FEATURES_OK:
+ d->wrote_features_ok = true;
+ break;
+ case VIRTIO_CONFIG_S_DRIVER_OK:
+ if (d->wrote_features_ok)
+ bad_driver(d, "did not re-read FEATURES_OK");
+ break;
+ }
+ goto write_through8;
}
-}
+ case offsetof(struct virtio_pci_mmio, cfg.queue_select):
+ vq = vq_by_num(d, val);
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST present a 0 in queue_size if the virtqueue
+ * corresponding to the current queue_select is unavailable.
+ */
+ if (!vq) {
+ d->mmio->cfg.queue_size = 0;
+ goto write_through16;
+ }
+ /* Save registers for old vq, if it was a valid vq */
+ if (d->mmio->cfg.queue_size)
+ save_vq_config(&d->mmio->cfg,
+ vq_by_num(d, d->mmio->cfg.queue_select));
+ /* Restore the registers for the queue they asked for */
+ restore_vq_config(&d->mmio->cfg, vq);
+ goto write_through16;
+ case offsetof(struct virtio_pci_mmio, cfg.queue_size):
+ /*
+ * 4.1.4.3.2:
+ *
+ * The driver MUST NOT write a value which is not a power of 2
+ * to queue_size.
+ */
+ if (val & (val-1))
+ bad_driver(d, "invalid queue size %u", val);
+ if (d->mmio->cfg.queue_enable)
+ bad_driver(d, "changing queue size on live device");
+ goto write_through16;
+ case offsetof(struct virtio_pci_mmio, cfg.queue_msix_vector):
+ bad_driver(d, "attempt to set MSIX vector to %u", val);
+ case offsetof(struct virtio_pci_mmio, cfg.queue_enable): {
+ struct virtqueue *vq = vq_by_num(d, d->mmio->cfg.queue_select);
-/*L:215
- * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
- * particular, it's used to notify us of device status changes during boot.
- */
-static void handle_output(unsigned long addr)
-{
- struct device *i;
+ /*
+ * 4.1.4.3.2:
+ *
+ * The driver MUST NOT write a 0 to queue_enable.
+ */
+ if (val != 1)
+ bad_driver(d, "setting queue_enable to %u", val);
- /* Check each device. */
- for (i = devices.dev; i; i = i->next) {
- struct virtqueue *vq;
+ /*
+ * 3.1.1:
+ *
+ * 7. Perform device-specific setup, including discovery of
+ * virtqueues for the device, optional per-bus setup,
+ * reading and possibly writing the device’s virtio
+ * configuration space, and population of virtqueues.
+ * 8. Set the DRIVER_OK status bit.
+ *
+ * All our devices require all virtqueues to be enabled, so
+ * they should have done that before setting DRIVER_OK.
+ */
+ if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK)
+ bad_driver(d, "enabling vq after DRIVER_OK");
+ d->mmio->cfg.queue_enable = val;
+ save_vq_config(&d->mmio->cfg, vq);
+ check_virtqueue(d, vq);
+ goto write_through16;
+ }
+ case offsetof(struct virtio_pci_mmio, cfg.queue_notify_off):
+ bad_driver(d, "attempt to write to queue_notify_off");
+ case offsetof(struct virtio_pci_mmio, cfg.queue_desc_lo):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_desc_hi):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_avail_lo):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_avail_hi):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_used_lo):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_used_hi):
/*
- * Notifications to device descriptors mean they updated the
- * device status.
+ * 4.1.4.3.2:
+ *
+ * The driver MUST configure the other virtqueue fields before
+ * enabling the virtqueue with queue_enable.
*/
- if (from_guest_phys(addr) == i->desc) {
- update_device_status(i);
- return;
- }
+ if (d->mmio->cfg.queue_enable)
+ bad_driver(d, "changing queue on live device");
+
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * 5. Set the FEATURES_OK status bit. The driver MUST not
+ * accept new feature bits after this step.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK))
+ bad_driver(d, "setting up vq before FEATURES_OK");
- /* Devices should not be used before features are finalized. */
- for (vq = i->vq; vq; vq = vq->next) {
- if (addr != vq->config.pfn*getpagesize())
- continue;
- errx(1, "Notification on %s before setup!", i->name);
+ /*
+ * 6. Re-read device status to ensure the FEATURES_OK bit is
+ * still set...
+ */
+ if (d->wrote_features_ok)
+ bad_driver(d, "didn't re-read FEATURES_OK before setup");
+
+ goto write_through32;
+ case offsetof(struct virtio_pci_mmio, notify):
+ vq = vq_by_num(d, val);
+ if (!vq)
+ bad_driver(d, "Invalid vq notification on %u", val);
+ /* Notify the process handling this vq by adding 1 to eventfd */
+ write(vq->eventfd, "\1\0\0\0\0\0\0\0", 8);
+ goto write_through16;
+ case offsetof(struct virtio_pci_mmio, isr):
+ bad_driver(d, "Unexpected write to isr");
+ /* Weird corner case: write to emerg_wr of console */
+ case sizeof(struct virtio_pci_mmio)
+ + offsetof(struct virtio_console_config, emerg_wr):
+ if (strcmp(d->name, "console") == 0) {
+ char c = val;
+ write(STDOUT_FILENO, &c, 1);
+ goto write_through32;
}
+ /* Fall through... */
+ default:
+ /*
+ * 4.1.4.3.2:
+ *
+ * The driver MUST NOT write to device_feature, num_queues,
+ * config_generation or queue_notify_off.
+ */
+ bad_driver(d, "Unexpected write to offset %u", off);
}
+feature_write_through32:
/*
- * Early console write is done using notify on a nul-terminated string
- * in Guest memory. It's also great for hacking debugging messages
- * into a Guest.
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device.
+ *...
+ * - Set the FEATURES_OK status bit. The driver MUST not
+ * accept new feature bits after this step.
*/
- if (addr >= guest_limit)
- errx(1, "Bad NOTIFY %#lx", addr);
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ bad_driver(d, "feature write before VIRTIO_CONFIG_S_DRIVER");
+ if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK)
+ bad_driver(d, "feature write after VIRTIO_CONFIG_S_FEATURES_OK");
- write(STDOUT_FILENO, from_guest_phys(addr),
- strnlen(from_guest_phys(addr), guest_limit - addr));
+ /*
+ * 4.1.3.1:
+ *
+ * The driver MUST access each field using the “natural” access
+ * method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for
+ * 16-bit fields and 8-bit accesses for 8-bit fields.
+ */
+write_through32:
+ if (mask != 0xFFFFFFFF) {
+ bad_driver(d, "non-32-bit write to offset %u (%#x)",
+ off, getreg(eip));
+ return;
+ }
+ memcpy((char *)d->mmio + off, &val, 4);
+ return;
+
+write_through16:
+ if (mask != 0xFFFF)
+ bad_driver(d, "non-16-bit write to offset %u (%#x)",
+ off, getreg(eip));
+ memcpy((char *)d->mmio + off, &val, 2);
+ return;
+
+write_through8:
+ if (mask != 0xFF)
+ bad_driver(d, "non-8-bit write to offset %u (%#x)",
+ off, getreg(eip));
+ memcpy((char *)d->mmio + off, &val, 1);
+ return;
}
-/*L:190
- * Device Setup
- *
- * All devices need a descriptor so the Guest knows it exists, and a "struct
- * device" so the Launcher can keep track of it. We have common helper
- * routines to allocate and manage them.
- */
-
-/*
- * The layout of the device page is a "struct lguest_device_desc" followed by a
- * number of virtqueue descriptors, then two sets of feature bits, then an
- * array of configuration bytes. This routine returns the configuration
- * pointer.
- */
-static u8 *device_config(const struct device *dev)
+static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask)
{
- return (void *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig)
- + dev->feature_len * 2;
+ u8 isr;
+ u32 val = 0;
+
+ switch (off) {
+ case offsetof(struct virtio_pci_mmio, cfg.device_feature_select):
+ case offsetof(struct virtio_pci_mmio, cfg.device_feature):
+ case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
+ case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ bad_driver(d,
+ "feature read before VIRTIO_CONFIG_S_DRIVER");
+ goto read_through32;
+ case offsetof(struct virtio_pci_mmio, cfg.msix_config):
+ bad_driver(d, "read of msix_config");
+ case offsetof(struct virtio_pci_mmio, cfg.num_queues):
+ goto read_through16;
+ case offsetof(struct virtio_pci_mmio, cfg.device_status):
+ /* As they did read, any write of FEATURES_OK is now fine. */
+ d->wrote_features_ok = false;
+ goto read_through8;
+ case offsetof(struct virtio_pci_mmio, cfg.config_generation):
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST present a changed config_generation after
+ * the driver has read a device-specific configuration value
+ * which has changed since any part of the device-specific
+ * configuration was last read.
+ *
+ * This is simple: none of our devices change config, so this
+ * is always 0.
+ */
+ goto read_through8;
+ case offsetof(struct virtio_pci_mmio, notify):
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST NOT notify the device before setting
+ * DRIVER_OK.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
+ bad_driver(d, "notify before VIRTIO_CONFIG_S_DRIVER_OK");
+ goto read_through16;
+ case offsetof(struct virtio_pci_mmio, isr):
+ if (mask != 0xFF)
+ bad_driver(d, "non-8-bit read from offset %u (%#x)",
+ off, getreg(eip));
+ isr = d->mmio->isr;
+ /*
+ * 4.1.4.5.1:
+ *
+ * The device MUST reset ISR status to 0 on driver read.
+ */
+ d->mmio->isr = 0;
+ return isr;
+ case offsetof(struct virtio_pci_mmio, padding):
+ bad_driver(d, "read from padding (%#x)", getreg(eip));
+ default:
+ /* Read from device config space, beware unaligned overflow */
+ if (off > d->mmio_size - 4)
+ bad_driver(d, "read past end (%#x)", getreg(eip));
+
+ /*
+ * 3.1.1:
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * 3. Set the DRIVER status bit: the guest OS knows how to
+ * drive the device.
+ * 4. Read device feature bits, and write the subset of
+ * feature bits understood by the OS and driver to the
+ * device. During this step the driver MAY read (but MUST NOT
+ * write) the device-specific configuration fields to check
+ * that it can support the device before accepting it.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ bad_driver(d,
+ "config read before VIRTIO_CONFIG_S_DRIVER");
+
+ if (mask == 0xFFFFFFFF)
+ goto read_through32;
+ else if (mask == 0xFFFF)
+ goto read_through16;
+ else
+ goto read_through8;
+ }
+
+ /*
+ * 4.1.3.1:
+ *
+ * The driver MUST access each field using the “natural” access
+ * method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for
+ * 16-bit fields and 8-bit accesses for 8-bit fields.
+ */
+read_through32:
+ if (mask != 0xFFFFFFFF)
+ bad_driver(d, "non-32-bit read to offset %u (%#x)",
+ off, getreg(eip));
+ memcpy(&val, (char *)d->mmio + off, 4);
+ return val;
+
+read_through16:
+ if (mask != 0xFFFF)
+ bad_driver(d, "non-16-bit read to offset %u (%#x)",
+ off, getreg(eip));
+ memcpy(&val, (char *)d->mmio + off, 2);
+ return val;
+
+read_through8:
+ if (mask != 0xFF)
+ bad_driver(d, "non-8-bit read to offset %u (%#x)",
+ off, getreg(eip));
+ memcpy(&val, (char *)d->mmio + off, 1);
+ return val;
}
-/*
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table page just above the Guest's normal memory. It returns a pointer to
- * that descriptor.
- */
-static struct lguest_device_desc *new_dev_desc(u16 type)
+static void emulate_mmio(unsigned long paddr, const u8 *insn)
{
- struct lguest_device_desc d = { .type = type };
- void *p;
+ u32 val, off, mask = 0xFFFFFFFF, insnlen = 0;
+ struct device *d = find_mmio_region(paddr, &off);
+ unsigned long args[] = { LHREQ_TRAP, 14 };
- /* Figure out where the next device config is, based on the last one. */
- if (devices.lastdev)
- p = device_config(devices.lastdev)
- + devices.lastdev->desc->config_len;
- else
- p = devices.descpage;
+ if (!d) {
+ warnx("MMIO touching %#08lx (not a device)", paddr);
+ goto reinject;
+ }
+
+ /* Prefix makes it a 16 bit op */
+ if (insn[0] == 0x66) {
+ mask = 0xFFFF;
+ insnlen++;
+ }
- /* We only have one page for all the descriptors. */
- if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
- errx(1, "Too many devices");
+ /* iowrite */
+ if (insn[insnlen] == 0x89) {
+ /* Next byte is r/m byte: bits 3-5 are register. */
+ val = getreg_num((insn[insnlen+1] >> 3) & 0x7, mask);
+ emulate_mmio_write(d, off, val, mask);
+ insnlen += 2 + insn_displacement_len(insn[insnlen+1]);
+ } else if (insn[insnlen] == 0x8b) { /* ioread */
+ /* Next byte is r/m byte: bits 3-5 are register. */
+ val = emulate_mmio_read(d, off, mask);
+ setreg_num((insn[insnlen+1] >> 3) & 0x7, val, mask);
+ insnlen += 2 + insn_displacement_len(insn[insnlen+1]);
+ } else if (insn[0] == 0x88) { /* 8-bit iowrite */
+ mask = 0xff;
+ /* Next byte is r/m byte: bits 3-5 are register. */
+ val = getreg_num((insn[1] >> 3) & 0x7, mask);
+ emulate_mmio_write(d, off, val, mask);
+ insnlen = 2 + insn_displacement_len(insn[1]);
+ } else if (insn[0] == 0x8a) { /* 8-bit ioread */
+ mask = 0xff;
+ val = emulate_mmio_read(d, off, mask);
+ setreg_num((insn[1] >> 3) & 0x7, val, mask);
+ insnlen = 2 + insn_displacement_len(insn[1]);
+ } else {
+ warnx("Unknown MMIO instruction touching %#08lx:"
+ " %02x %02x %02x %02x at %u",
+ paddr, insn[0], insn[1], insn[2], insn[3], getreg(eip));
+ reinject:
+ /* Inject trap into Guest. */
+ if (write(lguest_fd, args, sizeof(args)) < 0)
+ err(1, "Reinjecting trap 14 for fault at %#x",
+ getreg(eip));
+ return;
+ }
- /* p might not be aligned, so we memcpy in. */
- return memcpy(p, &d, sizeof(d));
+ /* Finally, we've "done" the instruction, so move past it. */
+ setreg(eip, getreg(eip) + insnlen);
}
-/*
- * Each device descriptor is followed by the description of its virtqueues. We
- * specify how many descriptors the virtqueue is to have.
+/*L:190
+ * Device Setup
+ *
+ * All devices need a descriptor so the Guest knows it exists, and a "struct
+ * device" so the Launcher can keep track of it. We have common helper
+ * routines to allocate and manage them.
*/
-static void add_virtqueue(struct device *dev, unsigned int num_descs,
- void (*service)(struct virtqueue *))
+static void add_pci_virtqueue(struct device *dev,
+ void (*service)(struct virtqueue *),
+ const char *name)
{
- unsigned int pages;
struct virtqueue **i, *vq = malloc(sizeof(*vq));
- void *p;
-
- /* First we need some memory for this virtqueue. */
- pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
- / getpagesize();
- p = get_pages(pages);
/* Initialize the virtqueue */
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->name = name;
/*
* This is the routine the service thread will run, and its Process ID
@@ -1218,25 +2393,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
vq->thread = (pid_t)-1;
/* Initialize the configuration. */
- vq->config.num = num_descs;
- vq->config.irq = devices.next_irq++;
- vq->config.pfn = to_guest_phys(p) / getpagesize();
-
- /* Initialize the vring. */
- vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
-
- /*
- * Append virtqueue to this device's descriptor. We use
- * device_config() to get the end of the device's current virtqueues;
- * we check that we haven't added any config or feature information
- * yet, otherwise we'd be overwriting them.
- */
- assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
- memcpy(device_config(dev), &vq->config, sizeof(vq->config));
- dev->num_vq++;
- dev->desc->num_vq++;
+ reset_vq_pci_config(vq);
+ vq->pci_config.queue_notify_off = 0;
- verbose("Virtqueue page %#lx\n", to_guest_phys(p));
+ /* Add one to the number of queues */
+ vq->dev->mmio->cfg.num_queues++;
/*
* Add to tail of list, so dev->vq is first vq, dev->vq->next is
@@ -1246,73 +2407,239 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
*i = vq;
}
-/*
- * The first half of the feature bitmask is for us to advertise features. The
- * second half is for the Guest to accept features.
- */
-static void add_feature(struct device *dev, unsigned bit)
+/* The Guest accesses the feature bits via the PCI common config MMIO region */
+static void add_pci_feature(struct device *dev, unsigned bit)
{
- u8 *features = get_feature_bits(dev);
+ dev->features |= (1ULL << bit);
+}
- /* We can't extend the feature bits once we've added config bytes */
- if (dev->desc->feature_len <= bit / CHAR_BIT) {
- assert(dev->desc->config_len == 0);
- dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
- }
+/* For devices with no config. */
+static void no_device_config(struct device *dev)
+{
+ dev->mmio_addr = get_mmio_region(dev->mmio_size);
- features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
+ dev->config.bar[0] = dev->mmio_addr;
+ /* Bottom 4 bits must be zero */
+ assert(~(dev->config.bar[0] & 0xF));
+}
+
+/* This puts the device config into BAR0 */
+static void set_device_config(struct device *dev, const void *conf, size_t len)
+{
+ /* Set up BAR 0 */
+ dev->mmio_size += len;
+ dev->mmio = realloc(dev->mmio, dev->mmio_size);
+ memcpy(dev->mmio + 1, conf, len);
+
+ /*
+ * 4.1.4.6:
+ *
+ * The device MUST present at least one VIRTIO_PCI_CAP_DEVICE_CFG
+ * capability for any device type which has a device-specific
+ * configuration.
+ */
+ /* Hook up device cfg */
+ dev->config.cfg_access.cap.cap_next
+ = offsetof(struct pci_config, device);
+
+ /*
+ * 4.1.4.6.1:
+ *
+ * The offset for the device-specific configuration MUST be 4-byte
+ * aligned.
+ */
+ assert(dev->config.cfg_access.cap.cap_next % 4 == 0);
+
+ /* Fix up device cfg field length. */
+ dev->config.device.length = len;
+
+ /* The rest is the same as the no-config case */
+ no_device_config(dev);
+}
+
+static void init_cap(struct virtio_pci_cap *cap, size_t caplen, int type,
+ size_t bar_offset, size_t bar_bytes, u8 next)
+{
+ cap->cap_vndr = PCI_CAP_ID_VNDR;
+ cap->cap_next = next;
+ cap->cap_len = caplen;
+ cap->cfg_type = type;
+ cap->bar = 0;
+ memset(cap->padding, 0, sizeof(cap->padding));
+ cap->offset = bar_offset;
+ cap->length = bar_bytes;
}
/*
- * This routine sets the configuration fields for an existing device's
- * descriptor. It only works for the last device, but that's OK because that's
- * how we use it.
+ * This sets up the pci_config structure, as defined in the virtio 1.0
+ * standard (and PCI standard).
*/
-static void set_config(struct device *dev, unsigned len, const void *conf)
+static void init_pci_config(struct pci_config *pci, u16 type,
+ u8 class, u8 subclass)
{
- /* Check we haven't overflowed our single page. */
- if (device_config(dev) + len > devices.descpage + getpagesize())
- errx(1, "Too many devices");
+ size_t bar_offset, bar_len;
+
+ /*
+ * 4.1.4.4.1:
+ *
+ * The device MUST either present notify_off_multiplier as an even
+ * power of 2, or present notify_off_multiplier as 0.
+ *
+ * 2.1.2:
+ *
+ * The device MUST initialize device status to 0 upon reset.
+ */
+ memset(pci, 0, sizeof(*pci));
+
+ /* 4.1.2.1: Devices MUST have the PCI Vendor ID 0x1AF4 */
+ pci->vendor_id = 0x1AF4;
+ /* 4.1.2.1: ... PCI Device ID calculated by adding 0x1040 ... */
+ pci->device_id = 0x1040 + type;
+
+ /*
+ * PCI have specific codes for different types of devices.
+ * Linux doesn't care, but it's a good clue for people looking
+ * at the device.
+ */
+ pci->class = class;
+ pci->subclass = subclass;
+
+ /*
+ * 4.1.2.1:
+ *
+ * Non-transitional devices SHOULD have a PCI Revision ID of 1 or
+ * higher
+ */
+ pci->revid = 1;
+
+ /*
+ * 4.1.2.1:
+ *
+ * Non-transitional devices SHOULD have a PCI Subsystem Device ID of
+ * 0x40 or higher.
+ */
+ pci->subsystem_device_id = 0x40;
+
+ /* We use our dummy interrupt controller, and irq_line is the irq */
+ pci->irq_line = devices.next_irq++;
+ pci->irq_pin = 0;
+
+ /* Support for extended capabilities. */
+ pci->status = (1 << 4);
+
+ /* Link them in. */
+ /*
+ * 4.1.4.3.1:
+ *
+ * The device MUST present at least one common configuration
+ * capability.
+ */
+ pci->capabilities = offsetof(struct pci_config, common);
+
+ /* 4.1.4.3.1 ... offset MUST be 4-byte aligned. */
+ assert(pci->capabilities % 4 == 0);
+
+ bar_offset = offsetof(struct virtio_pci_mmio, cfg);
+ bar_len = sizeof(((struct virtio_pci_mmio *)0)->cfg);
+ init_cap(&pci->common, sizeof(pci->common), VIRTIO_PCI_CAP_COMMON_CFG,
+ bar_offset, bar_len,
+ offsetof(struct pci_config, notify));
+
+ /*
+ * 4.1.4.4.1:
+ *
+ * The device MUST present at least one notification capability.
+ */
+ bar_offset += bar_len;
+ bar_len = sizeof(((struct virtio_pci_mmio *)0)->notify);
+
+ /*
+ * 4.1.4.4.1:
+ *
+ * The cap.offset MUST be 2-byte aligned.
+ */
+ assert(pci->common.cap_next % 2 == 0);
+
+ /* FIXME: Use a non-zero notify_off, for per-queue notification? */
+ /*
+ * 4.1.4.4.1:
+ *
+ * The value cap.length presented by the device MUST be at least 2 and
+ * MUST be large enough to support queue notification offsets for all
+ * supported queues in all possible configurations.
+ */
+ assert(bar_len >= 2);
+
+ init_cap(&pci->notify.cap, sizeof(pci->notify),
+ VIRTIO_PCI_CAP_NOTIFY_CFG,
+ bar_offset, bar_len,
+ offsetof(struct pci_config, isr));
+
+ bar_offset += bar_len;
+ bar_len = sizeof(((struct virtio_pci_mmio *)0)->isr);
+ /*
+ * 4.1.4.5.1:
+ *
+ * The device MUST present at least one VIRTIO_PCI_CAP_ISR_CFG
+ * capability.
+ */
+ init_cap(&pci->isr, sizeof(pci->isr),
+ VIRTIO_PCI_CAP_ISR_CFG,
+ bar_offset, bar_len,
+ offsetof(struct pci_config, cfg_access));
+
+ /*
+ * 4.1.4.7.1:
+ *
+ * The device MUST present at least one VIRTIO_PCI_CAP_PCI_CFG
+ * capability.
+ */
+ /* This doesn't have any presence in the BAR */
+ init_cap(&pci->cfg_access.cap, sizeof(pci->cfg_access),
+ VIRTIO_PCI_CAP_PCI_CFG,
+ 0, 0, 0);
- /* Copy in the config information, and store the length. */
- memcpy(device_config(dev), conf, len);
- dev->desc->config_len = len;
+ bar_offset += bar_len + sizeof(((struct virtio_pci_mmio *)0)->padding);
+ assert(bar_offset == sizeof(struct virtio_pci_mmio));
- /* Size must fit in config_len field (8 bits)! */
- assert(dev->desc->config_len == len);
+ /*
+ * This gets sewn in and length set in set_device_config().
+ * Some devices don't have a device configuration interface, so
+ * we never expose this if we don't call set_device_config().
+ */
+ init_cap(&pci->device, sizeof(pci->device), VIRTIO_PCI_CAP_DEVICE_CFG,
+ bar_offset, 0, 0);
}
/*
- * This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. We
- * don't actually start the service threads until later.
+ * This routine does all the creation and setup of a new device, but we don't
+ * actually place the MMIO region until we know the size (if any) of the
+ * device-specific config. And we don't actually start the service threads
+ * until later.
*
* See what I mean about userspace being boring?
*/
-static struct device *new_device(const char *name, u16 type)
+static struct device *new_pci_device(const char *name, u16 type,
+ u8 class, u8 subclass)
{
struct device *dev = malloc(sizeof(*dev));
/* Now we populate the fields one at a time. */
- dev->desc = new_dev_desc(type);
dev->name = name;
dev->vq = NULL;
- dev->feature_len = 0;
- dev->num_vq = 0;
dev->running = false;
- dev->next = NULL;
+ dev->wrote_features_ok = false;
+ dev->mmio_size = sizeof(struct virtio_pci_mmio);
+ dev->mmio = calloc(1, dev->mmio_size);
+ dev->features = (u64)1 << VIRTIO_F_VERSION_1;
+ dev->features_accepted = 0;
- /*
- * Append to device list. Prepending to a single-linked list is
- * easier, but the user expects the devices to be arranged on the bus
- * in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc.
- */
- if (devices.lastdev)
- devices.lastdev->next = dev;
- else
- devices.dev = dev;
- devices.lastdev = dev;
+ if (devices.device_num + 1 >= MAX_PCI_DEVICES)
+ errx(1, "Can only handle 31 PCI devices");
+
+ init_pci_config(&dev->config, type, class, subclass);
+ assert(!devices.pci[devices.device_num+1]);
+ devices.pci[++devices.device_num] = dev;
return dev;
}
@@ -1324,6 +2651,7 @@ static struct device *new_device(const char *name, u16 type)
static void setup_console(void)
{
struct device *dev;
+ struct virtio_console_config conf;
/* If we can save the initial standard input settings... */
if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
@@ -1336,7 +2664,7 @@ static void setup_console(void)
tcsetattr(STDIN_FILENO, TCSANOW, &term);
}
- dev = new_device("console", VIRTIO_ID_CONSOLE);
+ dev = new_pci_device("console", VIRTIO_ID_CONSOLE, 0x07, 0x00);
/* We store the console state in dev->priv, and initialize it. */
dev->priv = malloc(sizeof(struct console_abort));
@@ -1348,10 +2676,14 @@ static void setup_console(void)
* stdin. When they put something in the output queue, we write it to
* stdout.
*/
- add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
- add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
+ add_pci_virtqueue(dev, console_input, "input");
+ add_pci_virtqueue(dev, console_output, "output");
+
+ /* We need a configuration area for the emerg_wr early writes. */
+ add_pci_feature(dev, VIRTIO_CONSOLE_F_EMERG_WRITE);
+ set_device_config(dev, &conf, sizeof(conf));
- verbose("device %u: console\n", ++devices.device_num);
+ verbose("device %u: console\n", devices.device_num);
}
/*:*/
@@ -1449,6 +2781,7 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
static int get_tun_device(char tapif[IFNAMSIZ])
{
struct ifreq ifr;
+ int vnet_hdr_sz;
int netfd;
/* Start with this zeroed. Messy but sure. */
@@ -1476,6 +2809,18 @@ static int get_tun_device(char tapif[IFNAMSIZ])
*/
ioctl(netfd, TUNSETNOCSUM, 1);
+ /*
+ * In virtio before 1.0 (aka legacy virtio), we added a 16-bit
+ * field at the end of the network header iff
+ * VIRTIO_NET_F_MRG_RXBUF was negotiated. For virtio 1.0,
+ * that became the norm, but we need to tell the tun device
+ * about our expanded header (which is called
+ * virtio_net_hdr_mrg_rxbuf in the legacy system).
+ */
+ vnet_hdr_sz = sizeof(struct virtio_net_hdr_v1);
+ if (ioctl(netfd, TUNSETVNETHDRSZ, &vnet_hdr_sz) != 0)
+ err(1, "Setting tun header size to %u", vnet_hdr_sz);
+
memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
return netfd;
}
@@ -1499,12 +2844,12 @@ static void setup_tun_net(char *arg)
net_info->tunfd = get_tun_device(tapif);
/* First we create a new network device. */
- dev = new_device("net", VIRTIO_ID_NET);
+ dev = new_pci_device("net", VIRTIO_ID_NET, 0x02, 0x00);
dev->priv = net_info;
/* Network devices need a recv and a send queue, just like console. */
- add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
- add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
+ add_pci_virtqueue(dev, net_input, "rx");
+ add_pci_virtqueue(dev, net_output, "tx");
/*
* We need a socket to perform the magic network ioctls to bring up the
@@ -1524,7 +2869,7 @@ static void setup_tun_net(char *arg)
p = strchr(arg, ':');
if (p) {
str2mac(p+1, conf.mac);
- add_feature(dev, VIRTIO_NET_F_MAC);
+ add_pci_feature(dev, VIRTIO_NET_F_MAC);
*p = '\0';
}
@@ -1538,25 +2883,21 @@ static void setup_tun_net(char *arg)
configure_device(ipfd, tapif, ip);
/* Expect Guest to handle everything except UFO */
- add_feature(dev, VIRTIO_NET_F_CSUM);
- add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
- add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
- add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
- add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
- add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
- add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
- add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+ add_pci_feature(dev, VIRTIO_NET_F_CSUM);
+ add_pci_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+ add_pci_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+ add_pci_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+ add_pci_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+ add_pci_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+ add_pci_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+ add_pci_feature(dev, VIRTIO_NET_F_HOST_ECN);
/* We handle indirect ring entries */
- add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
- /* We're compliant with the damn spec. */
- add_feature(dev, VIRTIO_F_ANY_LAYOUT);
- set_config(dev, sizeof(conf), &conf);
+ add_pci_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
+ set_device_config(dev, &conf, sizeof(conf));
/* We don't need the socket any more; setup is done. */
close(ipfd);
- devices.device_num++;
-
if (bridging)
verbose("device %u: tun %s attached to bridge: %s\n",
devices.device_num, tapif, arg);
@@ -1607,7 +2948,7 @@ static void blk_request(struct virtqueue *vq)
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
/* Copy the output header from the front of the iov (adjusts iov) */
- iov_consume(iov, out_num, &out, sizeof(out));
+ iov_consume(vq->dev, iov, out_num, &out, sizeof(out));
/* Find and trim end of iov input array, for our status byte. */
in = NULL;
@@ -1619,7 +2960,7 @@ static void blk_request(struct virtqueue *vq)
}
}
if (!in)
- errx(1, "Bad virtblk cmd with no room for status");
+ bad_driver_vq(vq, "Bad virtblk cmd with no room for status");
/*
* For historical reasons, block operations are expressed in 512 byte
@@ -1627,15 +2968,7 @@ static void blk_request(struct virtqueue *vq)
*/
off = out.sector * 512;
- /*
- * In general the virtio block driver is allowed to try SCSI commands.
- * It'd be nice if we supported eject, for example, but we don't.
- */
- if (out.type & VIRTIO_BLK_T_SCSI_CMD) {
- fprintf(stderr, "Scsi commands unsupported\n");
- *in = VIRTIO_BLK_S_UNSUPP;
- wlen = sizeof(*in);
- } else if (out.type & VIRTIO_BLK_T_OUT) {
+ if (out.type & VIRTIO_BLK_T_OUT) {
/*
* Write
*
@@ -1657,7 +2990,7 @@ static void blk_request(struct virtqueue *vq)
/* Trim it back to the correct length */
ftruncate64(vblk->fd, vblk->len);
/* Die, bad Guest, die. */
- errx(1, "Write past end %llu+%u", off, ret);
+ bad_driver_vq(vq, "Write past end %llu+%u", off, ret);
}
wlen = sizeof(*in);
@@ -1699,11 +3032,11 @@ static void setup_block_file(const char *filename)
struct vblk_info *vblk;
struct virtio_blk_config conf;
- /* Creat the device. */
- dev = new_device("block", VIRTIO_ID_BLOCK);
+ /* Create the device. */
+ dev = new_pci_device("block", VIRTIO_ID_BLOCK, 0x01, 0x80);
/* The device has one virtqueue, where the Guest places requests. */
- add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
+ add_pci_virtqueue(dev, blk_request, "request");
/* Allocate the room for our own bookkeeping */
vblk = dev->priv = malloc(sizeof(*vblk));
@@ -1712,9 +3045,6 @@ static void setup_block_file(const char *filename)
vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
vblk->len = lseek64(vblk->fd, 0, SEEK_END);
- /* We support FLUSH. */
- add_feature(dev, VIRTIO_BLK_F_FLUSH);
-
/* Tell Guest how many sectors this device has. */
conf.capacity = cpu_to_le64(vblk->len / 512);
@@ -1722,20 +3052,19 @@ static void setup_block_file(const char *filename)
* Tell Guest not to put in too many descriptors at once: two are used
* for the in and out elements.
*/
- add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+ add_pci_feature(dev, VIRTIO_BLK_F_SEG_MAX);
conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
- /* Don't try to put whole struct: we have 8 bit limit. */
- set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
+ set_device_config(dev, &conf, sizeof(struct virtio_blk_config));
verbose("device %u: virtblock %llu sectors\n",
- ++devices.device_num, le64_to_cpu(conf.capacity));
+ devices.device_num, le64_to_cpu(conf.capacity));
}
/*L:211
- * Our random number generator device reads from /dev/random into the Guest's
+ * Our random number generator device reads from /dev/urandom into the Guest's
* input buffers. The usual case is that the Guest doesn't want random numbers
- * and so has no buffers although /dev/random is still readable, whereas
+ * and so has no buffers although /dev/urandom is still readable, whereas
* console is the reverse.
*
* The same logic applies, however.
@@ -1754,7 +3083,7 @@ static void rng_input(struct virtqueue *vq)
/* First we need a buffer from the Guests's virtqueue. */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
if (out_num)
- errx(1, "Output buffers in rng?");
+ bad_driver_vq(vq, "Output buffers in rng?");
/*
* Just like the console write, we loop to cover the whole iovec.
@@ -1763,8 +3092,8 @@ static void rng_input(struct virtqueue *vq)
while (!iov_empty(iov, in_num)) {
len = readv(rng_info->rfd, iov, in_num);
if (len <= 0)
- err(1, "Read from /dev/random gave %i", len);
- iov_consume(iov, in_num, NULL, len);
+ err(1, "Read from /dev/urandom gave %i", len);
+ iov_consume(vq->dev, iov, in_num, NULL, len);
totlen += len;
}
@@ -1780,17 +3109,20 @@ static void setup_rng(void)
struct device *dev;
struct rng_info *rng_info = malloc(sizeof(*rng_info));
- /* Our device's privat info simply contains the /dev/random fd. */
- rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
+ /* Our device's private info simply contains the /dev/urandom fd. */
+ rng_info->rfd = open_or_die("/dev/urandom", O_RDONLY);
/* Create the new device. */
- dev = new_device("rng", VIRTIO_ID_RNG);
+ dev = new_pci_device("rng", VIRTIO_ID_RNG, 0xff, 0);
dev->priv = rng_info;
/* The device has one virtqueue, where the Guest places inbufs. */
- add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
+ add_pci_virtqueue(dev, rng_input, "input");
- verbose("device %u: rng\n", devices.device_num++);
+ /* We don't have any configuration space */
+ no_device_config(dev);
+
+ verbose("device %u: rng\n", devices.device_num);
}
/* That's the end of device setup. */
@@ -1820,17 +3152,23 @@ static void __attribute__((noreturn)) restart_guest(void)
static void __attribute__((noreturn)) run_guest(void)
{
for (;;) {
- unsigned long notify_addr;
+ struct lguest_pending notify;
int readval;
/* We read from the /dev/lguest device to run the Guest. */
- readval = pread(lguest_fd, &notify_addr,
- sizeof(notify_addr), cpu_id);
-
- /* One unsigned long means the Guest did HCALL_NOTIFY */
- if (readval == sizeof(notify_addr)) {
- verbose("Notify on address %#lx\n", notify_addr);
- handle_output(notify_addr);
+ readval = pread(lguest_fd, &notify, sizeof(notify), cpu_id);
+ if (readval == sizeof(notify)) {
+ if (notify.trap == 13) {
+ verbose("Emulating instruction at %#x\n",
+ getreg(eip));
+ emulate_insn(notify.insn);
+ } else if (notify.trap == 14) {
+ verbose("Emulating MMIO at %#x\n",
+ getreg(eip));
+ emulate_mmio(notify.addr, notify.insn);
+ } else
+ errx(1, "Unknown trap %i addr %#08x\n",
+ notify.trap, notify.addr);
/* ENOENT means the Guest died. Reading tells us why. */
} else if (errno == ENOENT) {
char reason[1024] = { 0 };
@@ -1893,11 +3231,9 @@ int main(int argc, char *argv[])
main_args = argv;
/*
- * First we initialize the device list. We keep a pointer to the last
- * device, and the next interrupt number to use for devices (1:
- * remember that 0 is used by the timer).
+ * First we initialize the device list. We remember next interrupt
+ * number to use for devices (1: remember that 0 is used by the timer).
*/
- devices.lastdev = NULL;
devices.next_irq = 1;
/* We're CPU 0. In fact, that's the only CPU possible right now. */
@@ -1921,12 +3257,14 @@ int main(int argc, char *argv[])
guest_base = map_zeroed_pages(mem / getpagesize()
+ DEVICE_PAGES);
guest_limit = mem;
- guest_max = mem + DEVICE_PAGES*getpagesize();
- devices.descpage = get_pages(1);
+ guest_max = guest_mmio = mem + DEVICE_PAGES*getpagesize();
break;
}
}
+ /* We always have a console device, and it's always device 1. */
+ setup_console();
+
/* The options are fairly straight-forward */
while ((c = getopt_long(argc, argv, "v", opts, NULL)) != EOF) {
switch (c) {
@@ -1967,8 +3305,8 @@ int main(int argc, char *argv[])
verbose("Guest base is at %p\n", guest_base);
- /* We always have a console device */
- setup_console();
+ /* Initialize the (fake) PCI host bridge device. */
+ init_pci_host_bridge();
/* Now we load the kernel */
start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));