diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/isl9305.txt | 36 | ||||
| -rw-r--r-- | drivers/regulator/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/isl9305.c | 247 | ||||
| -rw-r--r-- | include/linux/platform_data/isl9305.h | 30 |
5 files changed, 320 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt new file mode 100644 index 000000000000..a626fc1bbf0d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt @@ -0,0 +1,36 @@ +Intersil ISL9305/ISL9305H voltage regulator + +Required properties: + +- compatible: "isl,isl9305" or "isl,isl9305h" +- reg: I2C slave address, usually 0x68. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. +- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. + VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. + VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. + VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. + +Optional properties: +- Per-regulator optional properties are defined in regulator.txt + +Example + + pmic: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + VINDCD1-supply = <&system_power>; + VINDCD2-supply = <&system_power>; + VINLDO1-supply = <&system_power>; + VINLDO2-supply = <&system_power>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e6b98ed4c12f..3c8b6f401e4f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -250,6 +250,12 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_ISL9305 + tristate "Intersil ISL9305 regulator" + depends on I2C + help + This driver supports ISL9305 voltage regulator chip. + config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 5513e2c141b1..e12fee8c943b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o +obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c new file mode 100644 index 000000000000..b0d12d186b68 --- /dev/null +++ b/drivers/regulator/isl9305.c @@ -0,0 +1,247 @@ +/* + * isl9305 - Intersil ISL9305 DCDC regulator + * + * Copyright 2014 Linaro Ltd + * + * Author: Mark Brown <broonie@kernel.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/of.h> +#include <linux/platform_data/isl9305.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +/* + * Registers + */ +#define ISL9305_DCD1OUT 0x0 +#define ISL9305_DCD2OUT 0x1 +#define ISL9305_LDO1OUT 0x2 +#define ISL9305_LDO2OUT 0x3 +#define ISL9305_DCD_PARAMETER 0x4 +#define ISL9305_SYSTEM_PARAMETER 0x5 +#define ISL9305_DCD_SRCTL 0x6 + +#define ISL9305_MAX_REG ISL9305_DCD_SRCTL + +/* + * DCD_PARAMETER + */ +#define ISL9305_DCD_PHASE 0x40 +#define ISL9305_DCD2_ULTRA 0x20 +#define ISL9305_DCD1_ULTRA 0x10 +#define ISL9305_DCD2_BLD 0x08 +#define ISL9305_DCD1_BLD 0x04 +#define ISL9305_DCD2_MODE 0x02 +#define ISL9305_DCD1_MODE 0x01 + +/* + * SYSTEM_PARAMETER + */ +#define ISL9305_I2C_EN 0x40 +#define ISL9305_DCDPOR_MASK 0x30 +#define ISL9305_LDO2_EN 0x08 +#define ISL9305_LDO1_EN 0x04 +#define ISL9305_DCD2_EN 0x02 +#define ISL9305_DCD1_EN 0x01 + +/* + * DCD_SRCTL + */ +#define ISL9305_DCD2SR_MASK 0xc0 +#define ISL9305_DCD1SR_MASK 0x07 + +static const struct regulator_ops isl9305_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_desc isl9305_regulators[] = { + [ISL9305_DCD1] = { + .name = "DCD1", + .n_voltages = 0x70, + .min_uV = 825000, + .uV_step = 25000, + .vsel_reg = ISL9305_DCD1OUT, + .vsel_mask = 0x7f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_DCD1_EN, + .supply_name = "VINDCD1", + .ops = &isl9305_ops, + }, + [ISL9305_DCD2] = { + .name = "DCD2", + .n_voltages = 0x70, + .min_uV = 825000, + .uV_step = 25000, + .vsel_reg = ISL9305_DCD2OUT, + .vsel_mask = 0x7f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_DCD2_EN, + .supply_name = "VINDCD2", + .ops = &isl9305_ops, + }, + [ISL9305_LDO1] = { + .name = "LDO1", + .n_voltages = 0x37, + .min_uV = 900000, + .uV_step = 50000, + .vsel_reg = ISL9305_LDO1OUT, + .vsel_mask = 0x3f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_LDO1_EN, + .supply_name = "VINLDO1", + .ops = &isl9305_ops, + }, + [ISL9305_LDO2] = { + .name = "LDO2", + .n_voltages = 0x37, + .min_uV = 900000, + .uV_step = 50000, + .vsel_reg = ISL9305_LDO2OUT, + .vsel_mask = 0x3f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_LDO2_EN, + .supply_name = "VINLDO2", + .ops = &isl9305_ops, + }, +}; + +#ifdef CONFIG_OF +static struct of_regulator_match isl9305_reg_matches[] = { + [ISL9305_DCD1] = { .name = "dcd1" }, + [ISL9305_DCD2] = { .name = "dcd2" }, + [ISL9305_LDO1] = { .name = "ldo1" }, + [ISL9305_LDO2] = { .name = "ldo2" }, +}; + +static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c) +{ + struct device_node *node = i2c->dev.of_node; + struct of_regulator_match *matches; + struct device_node *regs; + int count; + + regs = of_get_child_by_name(node, "regulators"); + if (!regs) + return NULL; + + matches = devm_kmemdup(&i2c->dev, isl9305_reg_matches, + sizeof(isl9305_reg_matches), GFP_KERNEL); + if (!matches) + return NULL; + + count = of_regulator_match(&i2c->dev, regs, matches, + ARRAY_SIZE(isl9305_reg_matches)); + of_node_put(regs); + if ((count < 0) || (count > ARRAY_SIZE(isl9305_reg_matches))) + return NULL; + + return matches; +} +#else +static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c) +{ + return NULL; +} +#endif + +static const struct regmap_config isl9305_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = ISL9305_MAX_REG, + .cache_type = REGCACHE_RBTREE, +}; + +static int isl9305_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_config config = { }; + struct isl9305_pdata *pdata = i2c->dev.platform_data; + struct of_regulator_match *of_matches; + struct regulator_dev *rdev; + struct regmap *regmap; + int i, ret; + + of_matches = isl9305_parse_dt(i2c); + + regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); + return ret; + } + + config.dev = &i2c->dev; + + for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) { + config.of_node = NULL; + config.init_data = NULL; + + if (of_matches) { + config.init_data = of_matches[i].init_data; + config.of_node = of_matches[i].of_node; + } + + if (!config.init_data && pdata) + config.init_data = pdata->init_data[i]; + + rdev = devm_regulator_register(&i2c->dev, + &isl9305_regulators[i], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&i2c->dev, "Failed to register %s: %d\n", + isl9305_regulators[i].name, ret); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id isl9305_dt_ids[] = { + { .compatible = "isl,isl9305" }, + { .compatible = "isl,isl9305h" }, + {}, +}; +#endif + +static const struct i2c_device_id isl9305_i2c_id[] = { + { "isl9305", }, + { "isl9305h", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id); + +static struct i2c_driver isl9305_regulator_driver = { + .driver = { + .name = "isl9305", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(isl9305_dt_ids), + }, + .probe = isl9305_i2c_probe, + .id_table = isl9305_i2c_id, +}; + +module_i2c_driver(isl9305_regulator_driver); + +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/isl9305.h b/include/linux/platform_data/isl9305.h new file mode 100644 index 000000000000..1419133fa69e --- /dev/null +++ b/include/linux/platform_data/isl9305.h @@ -0,0 +1,30 @@ +/* + * isl9305 - Intersil ISL9305 DCDC regulator + * + * Copyright 2014 Linaro Ltd + * + * Author: Mark Brown <broonie@kernel.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ISL9305_H +#define __ISL9305_H + +#define ISL9305_DCD1 0 +#define ISL9305_DCD2 1 +#define ISL9305_LDO1 2 +#define ISL9305_LDO2 3 + +#define ISL9305_MAX_REGULATOR ISL9305_LDO2 + +struct regulator_init_data; + +struct isl9305_pdata { + struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR]; +}; + +#endif |