summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig12
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi5
-rw-r--r--arch/arm/mach-dove/common.c4
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h16
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h126
-rw-r--r--arch/arm/mach-dove/irq.c10
-rw-r--r--arch/arm/mach-dove/pcie.c6
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c3
-rw-r--r--arch/arm/mach-kirkwood/common.c8
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h20
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h112
-rw-r--r--arch/arm/mach-kirkwood/irq.c9
-rw-r--r--arch/arm/mach-kirkwood/pcie.c12
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c3
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c6
-rw-r--r--arch/arm/mach-mv78xx0/common.c4
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/bridge-regs.h12
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h86
-rw-r--r--arch/arm/mach-mv78xx0/irq.c9
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c12
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/addr-map.c134
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.c2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h2
-rw-r--r--arch/arm/mach-orion5x/addr-map.c3
-rw-r--r--arch/arm/mach-orion5x/common.c4
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c2
-rw-r--r--arch/arm/mach-orion5x/include/mach/bridge-regs.h20
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h56
-rw-r--r--arch/arm/mach-orion5x/irq.c5
-rw-r--r--arch/arm/mach-orion5x/pci.c6
-rw-r--r--arch/arm/plat-orion/Makefile9
-rw-r--r--arch/arm/plat-orion/addr-map.c11
-rw-r--r--arch/arm/plat-orion/common.c12
-rw-r--r--arch/arm/plat-orion/include/plat/addr-map.h4
-rw-r--r--arch/arm/plat-orion/include/plat/common.h8
-rw-r--r--arch/arm/plat-orion/include/plat/mpp.h2
-rw-r--r--arch/arm/plat-orion/include/plat/time.h4
-rw-r--r--arch/arm/plat-orion/mpp.c6
-rw-r--r--arch/arm/plat-orion/time.c8
40 files changed, 459 insertions, 316 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5876aef72dfe..70505d8f85c5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -540,7 +540,7 @@ config ARCH_DOVE
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
select USB_ARCH_HAS_EHCI
help
Support for the Marvell Dove SoC 88AP510
@@ -551,7 +551,7 @@ config ARCH_KIRKWOOD
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
@@ -577,7 +577,7 @@ config ARCH_MV78XX0
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
@@ -589,7 +589,7 @@ config ARCH_ORION5X
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -1146,6 +1146,10 @@ config PLAT_ORION
select IRQ_DOMAIN
select COMMON_CLK
+config PLAT_ORION_LEGACY
+ bool
+ select PLAT_ORION
+
config PLAT_PXA
bool
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932a5a7d..16cc82cdaa81 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,11 @@
reg = <0xd0020300 0x30>;
interrupts = <37>, <38>, <39>, <40>;
};
+
+ addr-decoding@d0020000 {
+ compatible = "marvell,armada-addr-decoding-controller";
+ reg = <0xd0020000 0x258>;
+ };
};
};
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 28475bb7d36f..b37bef1d5ffa 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -41,12 +41,12 @@
****************************************************************************/
static struct map_desc dove_io_desc[] __initdata = {
{
- .virtual = DOVE_SB_REGS_VIRT_BASE,
+ .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
.length = DOVE_SB_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = DOVE_NB_REGS_VIRT_BASE,
+ .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index f953bb54aa9d..99f259e8cf33 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -13,22 +13,22 @@
#include <mach/dove.h>
-#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_CTRL_PCIE0_LINK 0x00000001
#define CPU_RESET 0x00000002
#define CPU_CTRL_PCIE1_LINK 0x00000008
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define FIQ_MASK_LOW_OFF 0x0008
@@ -47,9 +47,9 @@
#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
-#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c)
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index c91e3004a47b..661725e3115a 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -25,7 +25,7 @@
*/
#define DOVE_CESA_PHYS_BASE 0xc8000000
-#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000)
#define DOVE_CESA_SIZE SZ_1M
#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
@@ -38,15 +38,15 @@
#define DOVE_BOOTROM_SIZE SZ_128M
#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000)
#define DOVE_SCRATCHPAD_SIZE SZ_1M
#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000)
#define DOVE_SB_REGS_SIZE SZ_8M
#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000)
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
@@ -62,75 +62,75 @@
*/
/* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600)
/* North-South Bridge */
-#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000)
/* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000)
/* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000)
/* USB */
-#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000)
/* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00)
/* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00)
/* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000)
/* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000)
/* CAFE */
-#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000)
/* SATA */
-#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000)
/* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000)
/* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000)
/* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -142,44 +142,44 @@
#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
-#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000)
#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
/* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500)
/* AC97 */
-#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000)
/* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000)
-#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
-#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
-#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034)
#define DOVE_SSP_ON_AU1 (1 << 0)
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
-#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000)
/* LCD Controller */
-#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000)
/* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000)
/* Video Engine */
-#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000)
#endif
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 186357f3b4db..087711524e8a 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -100,19 +100,19 @@ void __init dove_init_irq(void)
{
int i;
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-71.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
- orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
/*
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 355332d502cb..bb15b26041cb 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = {
.map_irq = dove_pcie_map_irq,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Dove PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk(KERN_INFO "link up\n");
pp->index = index;
pp->root_bus_nr = -1;
- pp->base = (void __iomem *)base;
+ pp->base = base;
spin_lock_init(&pp->conf_lock);
memset(&pp->res, 0, sizeof(pp->res));
} else {
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index e9a7180863d9..8f0d162a1e1d 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
/*
* Setup MBUS dram target info.
*/
- orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ (void __iomem *) DDR_WINDOW_CPU_BASE);
}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5c38c94b79a2..3991077f58a2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -42,7 +42,7 @@
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_REGS_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
.type = MT_DEVICE,
@@ -205,8 +205,7 @@ static struct clk *tclk;
static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
{
- return clk_register_gate(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock);
}
@@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
void (*fn_en)(void),
void (*fn_dis)(void))
{
- return clk_register_gate_fn(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock, fn_en, fn_dis);
}
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index a115142f8690..5c82b7dce4e2 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,37 +13,37 @@
#include <mach/kirkwood.h>
-#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
#define L2_WRITETHROUGH 0x00000010
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
#define CGC_BIT_GE0 (0)
#define CGC_BIT_PEX0 (2)
#define CGC_BIT_USB0 (3)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index af4f0000dcef..041653a04a9c 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -45,7 +45,7 @@
#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -59,61 +59,61 @@
/*
* Register Map
*/
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
/*
* Supported devices and revisions.
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 20149a7fd280..884703535a0a 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -10,6 +10,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = {
void __init kirkwood_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-49.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 532d8acb38f9..ec544918b12c 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
void kirkwood_pcie_id(u32 *dev, u32 *rev)
{
kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE_VIRT_BASE);
}
struct pcie_port {
@@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = {
static void __init pcie0_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE_VIRT_BASE;
+ pp->base = PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
/*
@@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
static void __init pcie1_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+ pp->base = PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
/*
@@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = {
.map_irq = kirkwood_pcie_map_irq,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
printk(KERN_INFO "link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca2680442..367a9400f532 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -20,6 +20,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
- orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+ orion_pcie_reset(PCIE_VIRT_BASE);
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 137e479d15a0..343c435b4176 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -48,7 +48,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i
* so we don't need to take that into account here.
*/
- return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+ return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
}
/*
@@ -72,10 +72,10 @@ void __init mv78xx0_setup_cpu_mbus(void)
*/
if (mv78xx0_core_index() == 0)
orion_setup_cpu_mbus_target(&addr_map_cfg,
- DDR_WINDOW_CPU0_BASE);
+ (void __iomem *) DDR_WINDOW_CPU0_BASE);
else
orion_setup_cpu_mbus_target(&addr_map_cfg,
- DDR_WINDOW_CPU1_BASE);
+ (void __iomem *) DDR_WINDOW_CPU1_BASE);
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a6f3cd21e8c2..131cd4883f3d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -130,12 +130,12 @@ static int get_tclk(void)
****************************************************************************/
static struct map_desc mv78xx0_io_desc[] __initdata = {
{
- .virtual = MV78XX0_CORE_REGS_VIRT_BASE,
+ .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
.pfn = 0,
.length = MV78XX0_CORE_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = MV78XX0_REGS_VIRT_BASE,
+ .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
.length = MV78XX0_REGS_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index eb187e0e059b..5f03484584d4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -11,18 +11,18 @@
#include <mach/mv78xx0.h>
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_ERR_OFF 0x0000
#define IRQ_CAUSE_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0008
@@ -30,7 +30,7 @@
#define IRQ_MASK_LOW_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index bd03fed1128e..46200a183cf2 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -41,7 +41,7 @@
*/
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000)
#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
@@ -49,7 +49,7 @@
#define MV78XX0_PCIE_IO_SIZE SZ_1M
#define MV78XX0_REGS_PHYS_BASE 0xf1000000
-#define MV78XX0_REGS_VIRT_BASE 0xfd000000
+#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfd000000)
#define MV78XX0_REGS_SIZE SZ_1M
#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
@@ -64,47 +64,47 @@
/*
* Register Map
*/
-#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
-#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
-#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
-#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
-#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
-#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
-#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
-#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570)
+
+#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030)
+#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200)
+#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200)
+#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300)
+#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000)
/*
* Supported devices and revisions.
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 4d720f2aedba..32073444024b 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -10,6 +10,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -24,16 +25,16 @@ static int __initdata gpio0_irqs[4] = {
void __init mv78xx0_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
- orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+ orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+ orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
mv78xx0_core_index() ? 0x18 : 0,
IRQ_MV78XX0_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 26a059b4f472..a9a154a646dd 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -34,8 +34,8 @@ static struct resource pcie_io_space;
void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
{
- *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE00_VIRT_BASE);
}
u32 pcie_port_size[8] = {
@@ -223,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = {
.map_irq = mv78xx0_pcie_map_irq,
};
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
{
printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk("link up\n");
@@ -235,7 +235,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
pp->maj = maj;
pp->min = min;
pp->root_bus_nr = -1;
- pp->base = (void __iomem *)base;
+ pp->base = base;
spin_lock_init(&pp->conf_lock);
memset(&pp->res, 0, sizeof(pp->res));
} else {
@@ -249,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1)
if (init_port0) {
add_pcie_port(0, 0, PCIE00_VIRT_BASE);
- if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+ if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
add_pcie_port(0, 1, PCIE01_VIRT_BASE);
add_pcie_port(0, 2, PCIE02_VIRT_BASE);
add_pcie_port(0, 3, PCIE03_VIRT_BASE);
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 6ea8998ab8f1..cbe566443063 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,4 +1,4 @@
ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
new file mode 100644
index 000000000000..fe454a4430be
--- /dev/null
+++ b/arch/arm/mach-mvebu/addr-map.c
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS 1
+#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D
+#define ARMADA_XP_TARGET_ETH1 3
+#define ARMADA_XP_TARGET_PCIE_0_2 4
+#define ARMADA_XP_TARGET_ETH0 7
+#define ARMADA_XP_TARGET_PCIE_1_3 8
+
+#define ARMADA_370_TARGET_DEV_BUS 1
+#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D
+#define ARMADA_370_TARGET_PCIE_0 4
+#define ARMADA_370_TARGET_PCIE_1 8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+ /*
+ * Window for the BootROM, needed for SMP on Armada XP
+ */
+ { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+ ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+ { .compatible = "marvell,armada-addr-decoding-controller" },
+ { /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+ unsigned int offset;
+
+ /* The register layout is a bit annoying and the below code
+ * tries to cope with it.
+ * - At offset 0x0, there are the registers for the first 8
+ * windows, with 4 registers of 32 bits per window (ctrl,
+ * base, remap low, remap high)
+ * - Then at offset 0x80, there is a hole of 0x10 bytes for
+ * the internal registers base address and internal units
+ * sync barrier register.
+ * - Then at offset 0x90, there the registers for 12
+ * windows, with only 2 registers of 32 bits per window
+ * (ctrl, base).
+ */
+ if (win < 8)
+ offset = (win << 4);
+ else
+ offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+ return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 20,
+ .remappable_wins = 8,
+ .win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+ struct device_node *np;
+ void __iomem *mbus_unit_addr_decoding_base;
+ void __iomem *sdram_addr_decoding_base;
+
+ np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+ if (!np)
+ return -ENODEV;
+
+ mbus_unit_addr_decoding_base = of_iomap(np, 0);
+ BUG_ON(!mbus_unit_addr_decoding_base);
+
+ sdram_addr_decoding_base =
+ mbus_unit_addr_decoding_base +
+ ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+ addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+ /*
+ * Disable, clear and configure windows.
+ */
+ if (of_machine_is_compatible("marvell,armadaxp"))
+ orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+ else if (of_machine_is_compatible("marvell,armada370"))
+ orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+ else {
+ pr_err("Unsupported SoC\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ sdram_addr_decoding_base);
+ return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index b46418a8b352..49d791548ad6 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -25,7 +25,7 @@
static struct map_desc armada_370_xp_io_desc[] __initdata = {
{
- .virtual = ARMADA_370_XP_REGS_VIRT_BASE,
+ .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
.length = ARMADA_370_XP_REGS_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 25f0ca8d7820..aac9bebc6b03 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,7 +16,7 @@
#define __MACH_ARMADA_370_XP_H
#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000)
#define ARMADA_370_XP_REGS_SIZE SZ_1M
#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index eaac83d1df6f..b5efc0fd31cb 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
/*
* Setup MBUS dram target info.
*/
- orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 5387fdfcaf3f..3e07f52f2127 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -42,12 +42,12 @@
****************************************************************************/
static struct map_desc orion5x_io_desc[] __initdata = {
{
- .virtual = ORION5X_REGS_VIRT_BASE,
+ .virtual = (unsigned long) ORION5X_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
.length = ORION5X_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = ORION5X_PCIE_WA_VIRT_BASE,
+ .virtual = (unsigned long) ORION5X_PCIE_WA_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
.length = ORION5X_PCIE_WA_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0e19db69f5c4..e533588880ff 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -701,7 +701,7 @@ static void __init dns323_init(void)
* Note: AFAIK, rev B1 needs the same treatement but I'll let
* somebody else test it.
*/
- writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+ writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
break;
}
}
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 11a3c1e9801f..461fd69a10ae 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -13,27 +13,27 @@
#include <mach/orion5x.h>
-#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
+#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100)
-#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
+#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
-#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
#define WDT_RESET_OUT_EN 0x0002
-#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
-#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110)
-#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C)
#define WDT_INT_REQ 0x0008
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
+#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200)
-#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
+#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204)
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300)
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300)
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 1b60131b7f60..d265f5484a8e 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -37,7 +37,7 @@
* fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
****************************************************************************/
#define ORION5X_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_VIRT_BASE 0xfe000000
+#define ORION5X_REGS_VIRT_BASE IOMEM(0xfe000000)
#define ORION5X_REGS_SIZE SZ_1M
#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
@@ -53,7 +53,7 @@
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000
+#define ORION5X_PCIE_WA_VIRT_BASE IOMEM(0xfd000000)
#define ORION5X_PCIE_WA_SIZE SZ_16M
#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -66,42 +66,42 @@
* Orion Registers Map
******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
-#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000)
+#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500)
+#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000)
+#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x))
#define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100)
-#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
-#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
+#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000)
-#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000)
-#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000)
-#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000)
+#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000)
-#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900)
+#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900)
-#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000)
+#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000)
-#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000)
+#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000)
-#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
+#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000)
-#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000)
+#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000)
/*******************************************************************************
* Device Bus Registers
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e152641cdb0e..30a192b9c517 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -25,11 +26,11 @@ static int __initdata gpio0_irqs[4] = {
void __init orion5x_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
+ orion_irq_init(0, MAIN_IRQ_MASK);
/*
* Initialize gpiolib for GPIOs 0-31.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
IRQ_ORION5X_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 6921d49b988d..cd50e328db2a 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -38,7 +38,7 @@
/*****************************************************************************
* PCIe controller
****************************************************************************/
-#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+#define PCIE_BASE (ORION5X_PCIE_VIRT_BASE)
void __init orion5x_pcie_id(u32 *dev, u32 *rev)
{
@@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
}
- ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+ ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE,
bus, devfn, where, size, val);
return ret;
@@ -188,7 +188,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
/*****************************************************************************
* PCI controller
****************************************************************************/
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x))
#define PCI_MODE ORION5X_PCI_REG(0xd00)
#define PCI_CMD ORION5X_PCI_REG(0xc00)
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index c20ce0f5ce33..1251e5bd41c5 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,9 +2,8 @@
# Makefile for the linux kernel.
#
-obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o
-obj-m :=
-obj-n :=
-obj- :=
+obj-y += addr-map.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index 367ca89ac403..a7b8060c293a 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
static void __init __iomem *
orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
{
- return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+ return cfg->bridge_virt_base + (win << 4);
}
/*
@@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
* Setup MBUS dram target info.
*/
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const u32 ddr_window_cpu_base)
+ const void __iomem *ddr_window_cpu_base)
{
- void __iomem *addr;
int i;
int cs;
orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- addr = (void __iomem *)ddr_window_cpu_base;
-
for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+ u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 87f53caef655..b8a688cad4c2 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -86,13 +86,13 @@ static void __init uart_complete(
struct platform_device *orion_uart,
struct plat_serial8250_port *data,
struct resource *resources,
- unsigned int membase,
+ void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
{
data->mapbase = mapbase;
- data->membase = (void __iomem *)membase;
+ data->membase = membase;
data->irq = irq;
data->uartclk = uart_get_clk_rate(clk);
orion_uart->dev.platform_data = data;
@@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = {
.id = PLAT8250_DEV_PLATFORM,
};
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = {
.id = PLAT8250_DEV_PLATFORM1,
};
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = {
.id = PLAT8250_DEV_PLATFORM2,
};
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = {
.id = 3,
};
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
index fd556f77562c..ec63e4a627d0 100644
--- a/arch/arm/plat-orion/include/plat/addr-map.h
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info;
struct orion_addr_map_cfg {
const int num_wins; /* Total number of windows */
const int remappable_wins;
- const u32 bridge_virt_base;
+ void __iomem *bridge_virt_base;
/* If NULL, the default cpu_win_can_remap will be used, using
the value in remappable_wins */
@@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
const u8 attr, const int remap);
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const u32 ddr_window_cpu_base);
+ const void __iomem *ddr_window_cpu_base);
#endif
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index ae2377ef63e5..6bbc3fe5f58e 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -13,22 +13,22 @@
struct dsa_platform_data;
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h
index 723adce99f41..254552fee889 100644
--- a/arch/arm/plat-orion/include/plat/mpp.h
+++ b/arch/arm/plat-orion/include/plat/mpp.h
@@ -29,6 +29,6 @@
#define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1)
void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
- unsigned int mpp_max, unsigned int dev_bus);
+ unsigned int mpp_max, void __iomem *dev_bus);
#endif
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
index 4d5f1f6e18df..07527e417c62 100644
--- a/arch/arm/plat-orion/include/plat/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -11,9 +11,9 @@
#ifndef __PLAT_TIME_H
#define __PLAT_TIME_H
-void orion_time_set_base(u32 timer_base);
+void orion_time_set_base(void __iomem *timer_base);
-void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
+void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk);
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7740bb31d662..e686fe76a96b 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -18,15 +18,15 @@
#include <plat/mpp.h>
/* Address of the ith MPP control register */
-static __init unsigned long mpp_ctrl_addr(unsigned int i,
- unsigned long dev_bus)
+static __init void __iomem *mpp_ctrl_addr(unsigned int i,
+ void __iomem *dev_bus)
{
return dev_bus + (i) * 4;
}
void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
- unsigned int mpp_max, unsigned int dev_bus)
+ unsigned int mpp_max, void __iomem *dev_bus)
{
unsigned int mpp_nr_regs = (1 + mpp_max/8);
u32 mpp_ctrl[mpp_nr_regs];
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 1ed8d1397fcf..0f4fa863dd55 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = {
};
void __init
-orion_time_set_base(u32 _timer_base)
+orion_time_set_base(void __iomem *_timer_base)
{
- timer_base = (void __iomem *)_timer_base;
+ timer_base = _timer_base;
}
void __init
-orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk)
{
u32 u;
@@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Set SoC-specific data.
*/
- bridge_base = (void __iomem *)_bridge_base;
+ bridge_base = _bridge_base;
bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
ticks_per_jiffy = (tclk + HZ/2) / HZ;