summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/block/umem.c22
-rw-r--r--drivers/block/umem.h14
2 files changed, 18 insertions, 18 deletions
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 97c5dc9436a9..251041763690 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -293,7 +293,7 @@ static void mm_start_io(struct cardinfo *card)
desc->control_bits &= ~cpu_to_le32(DMASCR_CHAIN_EN);
desc->sem_control_bits = desc->control_bits;
-
+
if (debug & DEBUG_LED_ON_TRANSFER)
set_led(card, LED_REMOVE, LED_ON);
@@ -327,7 +327,7 @@ static int add_bio(struct cardinfo *card);
static void activate(struct cardinfo *card)
{
- /* if No page is Active, and Ready is
+ /* if No page is Active, and Ready is
* not empty, then switch Ready page
* to active and start IO.
* Then add any bh's that are available to Ready
@@ -366,7 +366,7 @@ static void mm_unplug_device(struct request_queue *q)
spin_unlock_irqrestore(&card->lock, flags);
}
-/*
+/*
* If there is room on Ready page, take
* one bh off list and add it.
* return 1 if there was room, else 0.
@@ -467,7 +467,7 @@ static void process_page(unsigned long data)
if (card->Active < 0)
goto out_unlock;
page = &card->mm_pages[card->Active];
-
+
while (page->headcnt < page->cnt) {
struct bio *bio = page->bio;
struct mm_dma_desc *desc = &page->desc[page->headcnt];
@@ -477,7 +477,7 @@ static void process_page(unsigned long data)
if (!(control & DMASCR_DMA_COMPLETE)) {
control = dma_status;
- last=1;
+ last=1;
}
page->headcnt++;
idx = page->idx;
@@ -487,7 +487,7 @@ static void process_page(unsigned long data)
page->idx = page->bio->bi_idx;
}
- pci_unmap_page(card->dev, desc->data_dma_handle,
+ pci_unmap_page(card->dev, desc->data_dma_handle,
bio_iovec_idx(bio,idx)->bv_len,
(control& DMASCR_TRANSFER_READ) ?
PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
@@ -592,7 +592,7 @@ HW_TRACE(0x30);
else
writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16,
card->csr_remap+ DMA_STATUS_CTRL + 2);
-
+
/* log errors and clear interrupt status */
if (dma_status & DMASCR_ANY_ERR) {
unsigned int data_log1, data_log2;
@@ -668,7 +668,7 @@ HW_TRACE(0x30);
HW_TRACE(0x36);
- return IRQ_HANDLED;
+ return IRQ_HANDLED;
}
/*
-----------------------------------------------------------------------------------
@@ -761,7 +761,7 @@ static void check_all_batteries(unsigned long ptr)
{
int i;
- for (i = 0; i < num_cards; i++)
+ for (i = 0; i < num_cards; i++)
if (!(cards[i].flags & UM_FLAG_NO_BATT)) {
struct cardinfo *card = &cards[i];
spin_lock_bh(&card->lock);
@@ -972,7 +972,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
tasklet_init(&card->tasklet, process_page, (unsigned long)card);
card->check_batteries = 0;
-
+
mem_present = readb(card->csr_remap + MEMCTRLSTATUS_MEMORY);
switch (mem_present) {
case MEM_128_MB:
@@ -1005,7 +1005,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
card->battery[1].good = !(batt_status & BATTERY_2_FAILURE);
card->battery[0].last_change = card->battery[1].last_change = jiffies;
- if (card->flags & UM_FLAG_NO_BATT)
+ if (card->flags & UM_FLAG_NO_BATT)
dev_printk(KERN_INFO, &card->dev->dev,
"Size %d KB\n", card->mm_size);
else {
diff --git a/drivers/block/umem.h b/drivers/block/umem.h
index 3a3819afed92..375c68974c9a 100644
--- a/drivers/block/umem.h
+++ b/drivers/block/umem.h
@@ -87,13 +87,13 @@
#define DMASCR_DMA_COMPLETE 0x40000
#define DMASCR_CHAIN_COMPLETE 0x80000
-/*
-3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE
-READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA
-TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE
-TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS
-(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6,
-AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING
+/*
+3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE
+READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA
+TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE
+TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS
+(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6,
+AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING
DMA READ OPERATIONS.
*/
#define DMASCR_READ 0x60000000