summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-axxia.txt30
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-exynos5.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt24
-rw-r--r--Documentation/i2c/busses/i2c-i8011
-rw-r--r--drivers/i2c/busses/Kconfig25
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-axxia.c559
-rw-r--r--drivers/i2c/busses/i2c-cros-ec-tunnel.c15
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c96
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c71
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c557
-rw-r--r--drivers/i2c/busses/i2c-i801.c3
-rw-r--r--drivers/i2c/busses/i2c-imx.c16
-rw-r--r--drivers/i2c/busses/i2c-ismt.c2
-rw-r--r--drivers/i2c/busses/i2c-mxs.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c21
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c4
-rw-r--r--include/linux/mfd/cros_ec_commands.h3
-rw-r--r--include/linux/platform_data/i2c-designware.h21
19 files changed, 1404 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
new file mode 100644
index 000000000000..2296d782b4c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@
+LSI Axxia I2C
+
+Required properties :
+- compatible : Must be "lsi,api2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "i2c".
+- clocks: Must contain an entry for each name in clock-names. See the common
+ clock bindings.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used. As only Normal and Fast modes
+ are supported, possible values are 100000 and 400000.
+
+Example :
+
+i2c@02010084000 {
+ compatible = "lsi,api2c";
+ device_type = "i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20 0x10084000 0x00 0x1000>;
+ interrupts = <0 19 4>;
+ clocks = <&clk_per>;
+ clock-names = "i2c";
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index d4745e31f5c6..2dbc0b62daa6 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -12,6 +12,8 @@ Required properties:
on Exynos5250 and Exynos5420 SoCs.
-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
on Exynos5260 SoCs.
+ -> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
+ on Exynos7 SoCs.
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
new file mode 100644
index 000000000000..f98b37401e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0@f8b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xf8b10000 0x1000>;
+ interrupts = <0 38 4>;
+ clocks = <&clock HIX5HD2_I2C0_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+}
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e9c803ea306d..793c83dac738 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -28,6 +28,7 @@ Supported adapters:
* Intel Wildcat Point (PCH)
* Intel Wildcat Point-LP (PCH)
* Intel BayTrail (SOC)
+ * Intel Sunrise Point-H (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2e45ae3796f1..917c3585f45b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -77,6 +77,16 @@ config I2C_AMD8111
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
+config I2C_HIX5HD2
+ tristate "Hix5hd2 high-speed I2C driver"
+ depends on ARCH_HIX5HD2
+ help
+ Say Y here to include support for high-speed I2C controller in the
+ Hisilicon based hix5hd2 SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-hix5hd2.
+
config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
@@ -112,6 +122,7 @@ config I2C_I801
Wildcat Point (PCH)
Wildcat Point-LP (PCH)
BayTrail (SOC)
+ Sunrise Point-H (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -337,6 +348,17 @@ config I2C_AU1550
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
+config I2C_AXXIA
+ tristate "Axxia I2C controller"
+ depends on ARCH_AXXIA || COMPILE_TEST
+ default ARCH_AXXIA
+ help
+ Say yes if you want to support the I2C bus on Axxia platforms.
+
+ Please note that this controller is limited to transfers of maximum
+ 255 bytes in length. Any attempt to to a larger transfer will return
+ an error.
+
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
depends on ARCH_BCM2835
@@ -423,6 +445,7 @@ config I2C_DESIGNWARE_CORE
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
select I2C_DESIGNWARE_CORE
+ depends on (ACPI && COMMON_CLK) || !ACPI
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -465,7 +488,7 @@ config I2C_EG20T
config I2C_EXYNOS5
tristate "Exynos5 high-speed I2C driver"
- depends on ARCH_EXYNOS5 && OF
+ depends on ARCH_EXYNOS && OF
default y
help
High-speed I2C controller on Exynos5 based Samsung SoCs.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 49bf07e5ef4d..78d56c54ba2b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
# Embedded system I2C/SMBus host controller drivers
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
+obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
new file mode 100644
index 000000000000..768a598d8d03
--- /dev/null
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -0,0 +1,559 @@
+/*
+ * This driver implements I2C master functionality using the LSI API2C
+ * controller.
+ *
+ * NOTE: The controller has a limitation in that it can only do transfers of
+ * maximum 255 bytes at a time. If a larger transfer is attempted, error code
+ * (-EINVAL) is returned.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#define SCL_WAIT_TIMEOUT_NS 25000000
+#define I2C_XFER_TIMEOUT (msecs_to_jiffies(250))
+#define I2C_STOP_TIMEOUT (msecs_to_jiffies(100))
+#define FIFO_SIZE 8
+
+#define GLOBAL_CONTROL 0x00
+#define GLOBAL_MST_EN BIT(0)
+#define GLOBAL_SLV_EN BIT(1)
+#define GLOBAL_IBML_EN BIT(2)
+#define INTERRUPT_STATUS 0x04
+#define INTERRUPT_ENABLE 0x08
+#define INT_SLV BIT(1)
+#define INT_MST BIT(0)
+#define WAIT_TIMER_CONTROL 0x0c
+#define WT_EN BIT(15)
+#define WT_VALUE(_x) ((_x) & 0x7fff)
+#define IBML_TIMEOUT 0x10
+#define IBML_LOW_MEXT 0x14
+#define IBML_LOW_SEXT 0x18
+#define TIMER_CLOCK_DIV 0x1c
+#define I2C_BUS_MONITOR 0x20
+#define SOFT_RESET 0x24
+#define MST_COMMAND 0x28
+#define CMD_BUSY (1<<3)
+#define CMD_MANUAL (0x00 | CMD_BUSY)
+#define CMD_AUTO (0x01 | CMD_BUSY)
+#define MST_RX_XFER 0x2c
+#define MST_TX_XFER 0x30
+#define MST_ADDR_1 0x34
+#define MST_ADDR_2 0x38
+#define MST_DATA 0x3c
+#define MST_TX_FIFO 0x40
+#define MST_RX_FIFO 0x44
+#define MST_INT_ENABLE 0x48
+#define MST_INT_STATUS 0x4c
+#define MST_STATUS_RFL (1 << 13) /* RX FIFO serivce */
+#define MST_STATUS_TFL (1 << 12) /* TX FIFO service */
+#define MST_STATUS_SNS (1 << 11) /* Manual mode done */
+#define MST_STATUS_SS (1 << 10) /* Automatic mode done */
+#define MST_STATUS_SCC (1 << 9) /* Stop complete */
+#define MST_STATUS_IP (1 << 8) /* Invalid parameter */
+#define MST_STATUS_TSS (1 << 7) /* Timeout */
+#define MST_STATUS_AL (1 << 6) /* Arbitration lost */
+#define MST_STATUS_ND (1 << 5) /* NAK on data phase */
+#define MST_STATUS_NA (1 << 4) /* NAK on address phase */
+#define MST_STATUS_NAK (MST_STATUS_NA | \
+ MST_STATUS_ND)
+#define MST_STATUS_ERR (MST_STATUS_NAK | \
+ MST_STATUS_AL | \
+ MST_STATUS_IP | \
+ MST_STATUS_TSS)
+#define MST_TX_BYTES_XFRD 0x50
+#define MST_RX_BYTES_XFRD 0x54
+#define SCL_HIGH_PERIOD 0x80
+#define SCL_LOW_PERIOD 0x84
+#define SPIKE_FLTR_LEN 0x88
+#define SDA_SETUP_TIME 0x8c
+#define SDA_HOLD_TIME 0x90
+
+/**
+ * axxia_i2c_dev - I2C device context
+ * @base: pointer to register struct
+ * @msg: pointer to current message
+ * @msg_xfrd: number of bytes transferred in msg
+ * @msg_err: error code for completed message
+ * @msg_complete: xfer completion object
+ * @dev: device reference
+ * @adapter: core i2c abstraction
+ * @i2c_clk: clock reference for i2c input clock
+ * @bus_clk_rate: current i2c bus clock rate
+ */
+struct axxia_i2c_dev {
+ void __iomem *base;
+ struct i2c_msg *msg;
+ size_t msg_xfrd;
+ int msg_err;
+ struct completion msg_complete;
+ struct device *dev;
+ struct i2c_adapter adapter;
+ struct clk *i2c_clk;
+ u32 bus_clk_rate;
+};
+
+static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
+{
+ u32 int_en;
+
+ int_en = readl(idev->base + MST_INT_ENABLE);
+ writel(int_en & ~mask, idev->base + MST_INT_ENABLE);
+}
+
+static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
+{
+ u32 int_en;
+
+ int_en = readl(idev->base + MST_INT_ENABLE);
+ writel(int_en | mask, idev->base + MST_INT_ENABLE);
+}
+
+/**
+ * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
+ */
+static u32 ns_to_clk(u64 ns, u32 clk_mhz)
+{
+ return div_u64(ns * clk_mhz, 1000);
+}
+
+static int axxia_i2c_init(struct axxia_i2c_dev *idev)
+{
+ u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
+ u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
+ u32 t_setup;
+ u32 t_high, t_low;
+ u32 tmo_clk;
+ u32 prescale;
+ unsigned long timeout;
+
+ dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
+ idev->bus_clk_rate, clk_mhz, divisor);
+
+ /* Reset controller */
+ writel(0x01, idev->base + SOFT_RESET);
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (readl(idev->base + SOFT_RESET) & 1) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(idev->dev, "Soft reset failed\n");
+ break;
+ }
+ }
+
+ /* Enable Master Mode */
+ writel(0x1, idev->base + GLOBAL_CONTROL);
+
+ if (idev->bus_clk_rate <= 100000) {
+ /* Standard mode SCL 50/50, tSU:DAT = 250 ns */
+ t_high = divisor * 1 / 2;
+ t_low = divisor * 1 / 2;
+ t_setup = ns_to_clk(250, clk_mhz);
+ } else {
+ /* Fast mode SCL 33/66, tSU:DAT = 100 ns */
+ t_high = divisor * 1 / 3;
+ t_low = divisor * 2 / 3;
+ t_setup = ns_to_clk(100, clk_mhz);
+ }
+
+ /* SCL High Time */
+ writel(t_high, idev->base + SCL_HIGH_PERIOD);
+ /* SCL Low Time */
+ writel(t_low, idev->base + SCL_LOW_PERIOD);
+ /* SDA Setup Time */
+ writel(t_setup, idev->base + SDA_SETUP_TIME);
+ /* SDA Hold Time, 300ns */
+ writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME);
+ /* Filter <50ns spikes */
+ writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN);
+
+ /* Configure Time-Out Registers */
+ tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz);
+
+ /* Find prescaler value that makes tmo_clk fit in 15-bits counter. */
+ for (prescale = 0; prescale < 15; ++prescale) {
+ if (tmo_clk <= 0x7fff)
+ break;
+ tmo_clk >>= 1;
+ }
+ if (tmo_clk > 0x7fff)
+ tmo_clk = 0x7fff;
+
+ /* Prescale divider (log2) */
+ writel(prescale, idev->base + TIMER_CLOCK_DIV);
+ /* Timeout in divided clocks */
+ writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL);
+
+ /* Mask all master interrupt bits */
+ i2c_int_disable(idev, ~0);
+
+ /* Interrupt enable */
+ writel(0x01, idev->base + INTERRUPT_ENABLE);
+
+ return 0;
+}
+
+static int i2c_m_rd(const struct i2c_msg *msg)
+{
+ return (msg->flags & I2C_M_RD) != 0;
+}
+
+static int i2c_m_ten(const struct i2c_msg *msg)
+{
+ return (msg->flags & I2C_M_TEN) != 0;
+}
+
+static int i2c_m_recv_len(const struct i2c_msg *msg)
+{
+ return (msg->flags & I2C_M_RECV_LEN) != 0;
+}
+
+/**
+ * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
+ * transfer length if this is the first byte of such a transfer.
+ */
+static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
+{
+ struct i2c_msg *msg = idev->msg;
+ size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO);
+ int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd);
+
+ while (bytes_to_transfer-- > 0) {
+ int c = readl(idev->base + MST_DATA);
+
+ if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
+ /*
+ * Check length byte for SMBus block read
+ */
+ if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
+ idev->msg_err = -EPROTO;
+ i2c_int_disable(idev, ~0);
+ complete(&idev->msg_complete);
+ break;
+ }
+ msg->len = 1 + c;
+ writel(msg->len, idev->base + MST_RX_XFER);
+ }
+ msg->buf[idev->msg_xfrd++] = c;
+ }
+
+ return 0;
+}
+
+/**
+ * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
+ * @return: Number of bytes left to transfer.
+ */
+static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
+{
+ struct i2c_msg *msg = idev->msg;
+ size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO);
+ int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd);
+ int ret = msg->len - idev->msg_xfrd - bytes_to_transfer;
+
+ while (bytes_to_transfer-- > 0)
+ writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA);
+
+ return ret;
+}
+
+static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
+{
+ struct axxia_i2c_dev *idev = _dev;
+ u32 status;
+
+ if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
+ return IRQ_NONE;
+
+ /* Read interrupt status bits */
+ status = readl(idev->base + MST_INT_STATUS);
+
+ if (!idev->msg) {
+ dev_warn(idev->dev, "unexpected interrupt\n");
+ goto out;
+ }
+
+ /* RX FIFO needs service? */
+ if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
+ axxia_i2c_empty_rx_fifo(idev);
+
+ /* TX FIFO needs service? */
+ if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
+ if (axxia_i2c_fill_tx_fifo(idev) == 0)
+ i2c_int_disable(idev, MST_STATUS_TFL);
+ }
+
+ if (status & MST_STATUS_SCC) {
+ /* Stop completed */
+ i2c_int_disable(idev, ~0);
+ complete(&idev->msg_complete);
+ } else if (status & MST_STATUS_SNS) {
+ /* Transfer done */
+ i2c_int_disable(idev, ~0);
+ if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
+ axxia_i2c_empty_rx_fifo(idev);
+ complete(&idev->msg_complete);
+ } else if (unlikely(status & MST_STATUS_ERR)) {
+ /* Transfer error */
+ i2c_int_disable(idev, ~0);
+ if (status & MST_STATUS_AL)
+ idev->msg_err = -EAGAIN;
+ else if (status & MST_STATUS_NAK)
+ idev->msg_err = -ENXIO;
+ else
+ idev->msg_err = -EIO;
+ dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n",
+ status,
+ idev->msg->addr,
+ readl(idev->base + MST_RX_BYTES_XFRD),
+ readl(idev->base + MST_RX_XFER),
+ readl(idev->base + MST_TX_BYTES_XFRD),
+ readl(idev->base + MST_TX_XFER));
+ complete(&idev->msg_complete);
+ }
+
+out:
+ /* Clear interrupt */
+ writel(INT_MST, idev->base + INTERRUPT_STATUS);
+
+ return IRQ_HANDLED;
+}
+
+static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
+{
+ u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
+ u32 rx_xfer, tx_xfer;
+ u32 addr_1, addr_2;
+ int ret;
+
+ if (msg->len > 255) {
+ dev_warn(idev->dev, "unsupported length %u\n", msg->len);
+ return -EINVAL;
+ }
+
+ idev->msg = msg;
+ idev->msg_xfrd = 0;
+ idev->msg_err = 0;
+ reinit_completion(&idev->msg_complete);
+
+ if (i2c_m_ten(msg)) {
+ /* 10-bit address
+ * addr_1: 5'b11110 | addr[9:8] | (R/nW)
+ * addr_2: addr[7:0]
+ */
+ addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
+ addr_2 = msg->addr & 0xFF;
+ } else {
+ /* 7-bit address
+ * addr_1: addr[6:0] | (R/nW)
+ * addr_2: dont care
+ */
+ addr_1 = (msg->addr << 1) & 0xFF;
+ addr_2 = 0;
+ }
+
+ if (i2c_m_rd(msg)) {
+ /* I2C read transfer */
+ rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
+ tx_xfer = 0;
+ addr_1 |= 1; /* Set the R/nW bit of the address */
+ } else {
+ /* I2C write transfer */
+ rx_xfer = 0;
+ tx_xfer = msg->len;
+ }
+
+ writel(rx_xfer, idev->base + MST_RX_XFER);
+ writel(tx_xfer, idev->base + MST_TX_XFER);
+ writel(addr_1, idev->base + MST_ADDR_1);
+ writel(addr_2, idev->base + MST_ADDR_2);
+
+ if (i2c_m_rd(msg))
+ int_mask |= MST_STATUS_RFL;
+ else if (axxia_i2c_fill_tx_fifo(idev) != 0)
+ int_mask |= MST_STATUS_TFL;
+
+ /* Start manual mode */
+ writel(CMD_MANUAL, idev->base + MST_COMMAND);
+
+ i2c_int_enable(idev, int_mask);
+
+ ret = wait_for_completion_timeout(&idev->msg_complete,
+ I2C_XFER_TIMEOUT);
+
+ i2c_int_disable(idev, int_mask);
+
+ if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+ dev_warn(idev->dev, "busy after xfer\n");
+
+ if (ret == 0)
+ idev->msg_err = -ETIMEDOUT;
+
+ if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
+ axxia_i2c_init(idev);
+
+ return idev->msg_err;
+}
+
+static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
+{
+ u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
+ int ret;
+
+ reinit_completion(&idev->msg_complete);
+
+ /* Issue stop */
+ writel(0xb, idev->base + MST_COMMAND);
+ i2c_int_enable(idev, int_mask);
+ ret = wait_for_completion_timeout(&idev->msg_complete,
+ I2C_STOP_TIMEOUT);
+ i2c_int_disable(idev, int_mask);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+ dev_warn(idev->dev, "busy after stop\n");
+
+ return 0;
+}
+
+static int
+axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+ int i;
+ int ret = 0;
+
+ for (i = 0; ret == 0 && i < num; ++i)
+ ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
+
+ axxia_i2c_stop(idev);
+
+ return ret ? : i;
+}
+
+static u32 axxia_i2c_func(struct i2c_adapter *adap)
+{
+ u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA);
+ return caps;
+}
+
+static const struct i2c_algorithm axxia_i2c_algo = {
+ .master_xfer = axxia_i2c_xfer,
+ .functionality = axxia_i2c_func,
+};
+
+static int axxia_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct axxia_i2c_dev *idev = NULL;
+ struct resource *res;
+ void __iomem *base;
+ int irq;
+ int ret = 0;
+
+ idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+ if (!idev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "missing interrupt resource\n");
+ return irq;
+ }
+
+ idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
+ if (IS_ERR(idev->i2c_clk)) {
+ dev_err(&pdev->dev, "missing clock\n");
+ return PTR_ERR(idev->i2c_clk);
+ }
+
+ idev->base = base;
+ idev->dev = &pdev->dev;
+ init_completion(&idev->msg_complete);
+
+ of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
+ if (idev->bus_clk_rate == 0)
+ idev->bus_clk_rate = 100000; /* default clock rate */
+
+ ret = axxia_i2c_init(idev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
+ pdev->name, idev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
+ return ret;
+ }
+
+ clk_prepare_enable(idev->i2c_clk);
+
+ i2c_set_adapdata(&idev->adapter, idev);
+ strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
+ idev->adapter.owner = THIS_MODULE;
+ idev->adapter.algo = &axxia_i2c_algo;
+ idev->adapter.dev.parent = &pdev->dev;
+ idev->adapter.dev.of_node = pdev->dev.of_node;
+
+ platform_set_drvdata(pdev, idev);
+
+ ret = i2c_add_adapter(&idev->adapter);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add adapter\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int axxia_i2c_remove(struct platform_device *pdev)
+{
+ struct axxia_i2c_dev *idev = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(idev->i2c_clk);
+ i2c_del_adapter(&idev->adapter);
+
+ return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id axxia_i2c_of_match[] = {
+ { .compatible = "lsi,api2c", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, axxia_i2c_of_match);
+
+static struct platform_driver axxia_i2c_driver = {
+ .probe = axxia_i2c_probe,
+ .remove = axxia_i2c_remove,
+ .driver = {
+ .name = "axxia-i2c",
+ .of_match_table = axxia_i2c_of_match,
+ },
+};
+
+module_platform_driver(axxia_i2c_driver);
+
+MODULE_DESCRIPTION("Axxia I2C Bus driver");
+MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 8ca5cbbcec91..875c22ae5400 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -96,7 +96,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
msg->addr_flags = i2c_msg->addr;
if (i2c_msg->flags & I2C_M_TEN)
- msg->addr_flags |= EC_I2C_FLAG_10BIT;
+ return -EINVAL;
if (i2c_msg->flags & I2C_M_RD) {
msg->addr_flags |= EC_I2C_FLAG_READ;
@@ -220,7 +220,9 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
}
}
- ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+ result = ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+ if (result)
+ goto exit;
msg.version = 0;
msg.command = EC_CMD_I2C_PASSTHRU;
@@ -313,11 +315,20 @@ static int ec_i2c_remove(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_i2c_of_match[] = {
+ { .compatible = "google,cros-ec-i2c-tunnel" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
+#endif
+
static struct platform_driver ec_i2c_tunnel_driver = {
.probe = ec_i2c_probe,
.remove = ec_i2c_remove,
.driver = {
.name = "cros-ec-i2c-tunnel",
+ .of_match_table = of_match_ptr(cros_ec_i2c_of_match),
},
};
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index bc8773333155..a7431150acf7 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
@@ -41,6 +42,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/platform_data/i2c-designware.h>
#include "i2c-designware-core.h"
static struct i2c_algorithm i2c_dw_algo = {
@@ -79,10 +81,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
- bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST;
-
- if (!ACPI_HANDLE(&pdev->dev))
- return -ENODEV;
+ const struct acpi_device_id *id;
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
@@ -92,14 +91,33 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
* Try to get SDA hold time and *CNT values from an ACPI method if
* it exists for both supported speed modes.
*/
- dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt,
- fs_mode ? NULL : &dev->sda_hold_time);
+ dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
- fs_mode ? &dev->sda_hold_time : NULL);
+ &dev->sda_hold_time);
+
+ /*
+ * Provide a way for Designware I2C host controllers that are not
+ * based on Intel LPSS to specify their input clock frequency via
+ * id->driver_data.
+ */
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (id && id->driver_data)
+ clk_register_fixed_rate(&pdev->dev, dev_name(&pdev->dev), NULL,
+ CLK_IS_ROOT, id->driver_data);
return 0;
}
+static void dw_i2c_acpi_unconfigure(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (id && id->driver_data)
+ clk_unregister(dev->clk);
+}
+
static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT33C2", 0 },
{ "INT33C3", 0 },
@@ -107,6 +125,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT3433", 0 },
{ "80860F41", 0 },
{ "808622C1", 0 },
+ { "AMD0010", 133 * 1000 * 1000 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
@@ -115,6 +134,7 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
{
return -ENODEV;
}
+static inline void dw_i2c_acpi_unconfigure(struct platform_device *pdev) { }
#endif
static int dw_i2c_probe(struct platform_device *pdev)
@@ -122,7 +142,9 @@ static int dw_i2c_probe(struct platform_device *pdev)
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
+ struct dw_i2c_platform_data *pdata;
int irq, r;
+ u32 clk_freq, ht = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -145,21 +167,14 @@ static int dw_i2c_probe(struct platform_device *pdev)
dev->irq = irq;
platform_set_drvdata(pdev, dev);
- dev->clk = devm_clk_get(&pdev->dev, NULL);
- dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-
- if (IS_ERR(dev->clk))
- return PTR_ERR(dev->clk);
- clk_prepare_enable(dev->clk);
-
- if (pdev->dev.of_node) {
- u32 ht = 0;
- u32 ic_clk = dev->get_clk_rate_khz(dev);
+ /* fast mode by default because of legacy reasons */
+ clk_freq = 400000;
+ if (ACPI_COMPANION(&pdev->dev)) {
+ dw_i2c_acpi_configure(pdev);
+ } else if (pdev->dev.of_node) {
of_property_read_u32(pdev->dev.of_node,
"i2c-sda-hold-time-ns", &ht);
- dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
- 1000000);
of_property_read_u32(pdev->dev.of_node,
"i2c-sda-falling-time-ns",
@@ -167,6 +182,21 @@ static int dw_i2c_probe(struct platform_device *pdev)
of_property_read_u32(pdev->dev.of_node,
"i2c-scl-falling-time-ns",
&dev->scl_falling_time);
+
+ of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &clk_freq);
+
+ /* Only standard mode at 100kHz and fast mode at 400kHz
+ * are supported.
+ */
+ if (clk_freq != 100000 && clk_freq != 400000) {
+ dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+ return -EINVAL;
+ }
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata)
+ clk_freq = pdata->i2c_scl_freq;
}
dev->functionality =
@@ -176,12 +206,27 @@ static int dw_i2c_probe(struct platform_device *pdev)
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
- dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+ if (clk_freq == 100000)
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
+ else
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
- /* Try first if we can configure the device from ACPI */
- r = dw_i2c_acpi_configure(pdev);
- if (r) {
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+ dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ clk_prepare_enable(dev->clk);
+
+ if (!dev->sda_hold_time && ht) {
+ u32 ic_clk = dev->get_clk_rate_khz(dev);
+
+ dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
+ 1000000);
+ }
+
+ if (!dev->tx_fifo_depth) {
u32 param1 = i2c_dw_read_comp_param(dev);
dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
@@ -237,6 +282,9 @@ static int dw_i2c_remove(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ if (ACPI_COMPANION(&pdev->dev))
+ dw_i2c_acpi_unconfigure(pdev);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 28073f1d6d47..81e6263cd7da 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -83,7 +83,6 @@
#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0)
#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1)
#define HSI2C_INT_TRAILING_EN (1u << 6)
-#define HSI2C_INT_I2C_EN (1u << 9)
/* I2C_INT_STAT Register bits */
#define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0)
@@ -95,6 +94,17 @@
#define HSI2C_INT_TRAILING (1u << 6)
#define HSI2C_INT_I2C (1u << 9)
+#define HSI2C_INT_TRANS_DONE (1u << 7)
+#define HSI2C_INT_TRANS_ABORT (1u << 8)
+#define HSI2C_INT_NO_DEV_ACK (1u << 9)
+#define HSI2C_INT_NO_DEV (1u << 10)
+#define HSI2C_INT_TIMEOUT (1u << 11)
+#define HSI2C_INT_I2C_TRANS (HSI2C_INT_TRANS_DONE | \
+ HSI2C_INT_TRANS_ABORT | \
+ HSI2C_INT_NO_DEV_ACK | \
+ HSI2C_INT_NO_DEV | \
+ HSI2C_INT_TIMEOUT)
+
/* I2C_FIFO_STAT Register bits */
#define HSI2C_RX_FIFO_EMPTY (1u << 24)
#define HSI2C_RX_FIFO_FULL (1u << 23)
@@ -143,6 +153,8 @@
#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+#define HSI2C_EXYNOS7 BIT(0)
+
struct exynos5_i2c {
struct i2c_adapter adap;
unsigned int suspended:1;
@@ -192,6 +204,7 @@ struct exynos5_i2c {
*/
struct exynos_hsi2c_variant {
unsigned int fifo_depth;
+ unsigned int hw;
};
static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = {
@@ -202,6 +215,11 @@ static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = {
.fifo_depth = 16,
};
+static const struct exynos_hsi2c_variant exynos7_hsi2c_data = {
+ .fifo_depth = 16,
+ .hw = HSI2C_EXYNOS7,
+};
+
static const struct of_device_id exynos5_i2c_match[] = {
{
.compatible = "samsung,exynos5-hsi2c",
@@ -212,6 +230,9 @@ static const struct of_device_id exynos5_i2c_match[] = {
}, {
.compatible = "samsung,exynos5260-hsi2c",
.data = &exynos5260_hsi2c_data
+ }, {
+ .compatible = "samsung,exynos7-hsi2c",
+ .data = &exynos7_hsi2c_data
}, {},
};
MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
@@ -256,13 +277,24 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode)
i2c->hs_clock : i2c->fs_clock;
/*
+ * In case of HSI2C controller in Exynos5 series
* FPCLK / FI2C =
* (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+ *
+ * In case of HSI2C controllers in Exynos7 series
+ * FPCLK / FI2C =
+ * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + FLT_CYCLE
+ *
* utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
* utemp1 = (TSCLK_L + TSCLK_H + 2)
*/
t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
- utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
+ utemp0 = (clkin / op_clk) - 8;
+
+ if (i2c->variant->hw == HSI2C_EXYNOS7)
+ utemp0 -= t_ftl_cycle;
+ else
+ utemp0 -= 2 * t_ftl_cycle;
/* CLK_DIV max is 256 */
for (div = 0; div < 256; div++) {
@@ -407,7 +439,28 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
writel(int_status, i2c->regs + HSI2C_INT_STATUS);
/* handle interrupt related to the transfer status */
- if (int_status & HSI2C_INT_I2C) {
+ if (i2c->variant->hw == HSI2C_EXYNOS7) {
+ if (int_status & HSI2C_INT_TRANS_DONE) {
+ i2c->trans_done = 1;
+ i2c->state = 0;
+ } else if (int_status & HSI2C_INT_TRANS_ABORT) {
+ dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+ i2c->state = -EAGAIN;
+ goto stop;
+ } else if (int_status & HSI2C_INT_NO_DEV_ACK) {
+ dev_dbg(i2c->dev, "No ACK from device\n");
+ i2c->state = -ENXIO;
+ goto stop;
+ } else if (int_status & HSI2C_INT_NO_DEV) {
+ dev_dbg(i2c->dev, "No device\n");
+ i2c->state = -ENXIO;
+ goto stop;
+ } else if (int_status & HSI2C_INT_TIMEOUT) {
+ dev_dbg(i2c->dev, "Accessing device timed out\n");
+ i2c->state = -EAGAIN;
+ goto stop;
+ }
+ } else if (int_status & HSI2C_INT_I2C) {
trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
if (trans_status & HSI2C_NO_DEV_ACK) {
dev_dbg(i2c->dev, "No ACK from device\n");
@@ -512,12 +565,17 @@ static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
{
u32 i2c_ctl;
- u32 int_en = HSI2C_INT_I2C_EN;
+ u32 int_en = 0;
u32 i2c_auto_conf = 0;
u32 fifo_ctl;
unsigned long flags;
unsigned short trig_lvl;
+ if (i2c->variant->hw == HSI2C_EXYNOS7)
+ int_en |= HSI2C_INT_I2C_TRANS;
+ else
+ int_en |= HSI2C_INT_I2C;
+
i2c_ctl = readl(i2c->regs + HSI2C_CTL);
i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
@@ -724,12 +782,13 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
goto err_clk;
}
+ /* Need to check the variant before setting up. */
+ i2c->variant = exynos5_i2c_get_variant(pdev);
+
ret = exynos5_hsi2c_clock_setup(i2c);
if (ret)
goto err_clk;
- i2c->variant = exynos5_i2c_get_variant(pdev);
-
exynos5_i2c_reset(i2c);
ret = i2c_add_adapter(&i2c->adap);
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
new file mode 100644
index 000000000000..9490d0f4255c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -0,0 +1,557 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Now only support 7 bit address.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Register Map */
+#define HIX5I2C_CTRL 0x00
+#define HIX5I2C_COM 0x04
+#define HIX5I2C_ICR 0x08
+#define HIX5I2C_SR 0x0c
+#define HIX5I2C_SCL_H 0x10
+#define HIX5I2C_SCL_L 0x14
+#define HIX5I2C_TXR 0x18
+#define HIX5I2C_RXR 0x1c
+
+/* I2C_CTRL_REG */
+#define I2C_ENABLE BIT(8)
+#define I2C_UNMASK_TOTAL BIT(7)
+#define I2C_UNMASK_START BIT(6)
+#define I2C_UNMASK_END BIT(5)
+#define I2C_UNMASK_SEND BIT(4)
+#define I2C_UNMASK_RECEIVE BIT(3)
+#define I2C_UNMASK_ACK BIT(2)
+#define I2C_UNMASK_ARBITRATE BIT(1)
+#define I2C_UNMASK_OVER BIT(0)
+#define I2C_UNMASK_ALL (I2C_UNMASK_ACK | I2C_UNMASK_OVER)
+
+/* I2C_COM_REG */
+#define I2C_NO_ACK BIT(4)
+#define I2C_START BIT(3)
+#define I2C_READ BIT(2)
+#define I2C_WRITE BIT(1)
+#define I2C_STOP BIT(0)
+
+/* I2C_ICR_REG */
+#define I2C_CLEAR_START BIT(6)
+#define I2C_CLEAR_END BIT(5)
+#define I2C_CLEAR_SEND BIT(4)
+#define I2C_CLEAR_RECEIVE BIT(3)
+#define I2C_CLEAR_ACK BIT(2)
+#define I2C_CLEAR_ARBITRATE BIT(1)
+#define I2C_CLEAR_OVER BIT(0)
+#define I2C_CLEAR_ALL (I2C_CLEAR_START | I2C_CLEAR_END | \
+ I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \
+ I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \
+ I2C_CLEAR_OVER)
+
+/* I2C_SR_REG */
+#define I2C_BUSY BIT(7)
+#define I2C_START_INTR BIT(6)
+#define I2C_END_INTR BIT(5)
+#define I2C_SEND_INTR BIT(4)
+#define I2C_RECEIVE_INTR BIT(3)
+#define I2C_ACK_INTR BIT(2)
+#define I2C_ARBITRATE_INTR BIT(1)
+#define I2C_OVER_INTR BIT(0)
+
+#define HIX5I2C_MAX_FREQ 400000 /* 400k */
+#define HIX5I2C_READ_OPERATION 0x01
+
+enum hix5hd2_i2c_state {
+ HIX5I2C_STAT_RW_ERR = -1,
+ HIX5I2C_STAT_INIT,
+ HIX5I2C_STAT_RW,
+ HIX5I2C_STAT_SND_STOP,
+ HIX5I2C_STAT_RW_SUCCESS,
+};
+
+struct hix5hd2_i2c_priv {
+ struct i2c_adapter adap;
+ struct i2c_msg *msg;
+ struct completion msg_complete;
+ unsigned int msg_idx;
+ unsigned int msg_len;
+ int stop;
+ void __iomem *regs;
+ struct clk *clk;
+ struct device *dev;
+ spinlock_t lock; /* IRQ synchronization */
+ int err;
+ unsigned int freq;
+ enum hix5hd2_i2c_state state;
+};
+
+static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv)
+{
+ u32 val = readl_relaxed(priv->regs + HIX5I2C_SR);
+
+ writel_relaxed(val, priv->regs + HIX5I2C_ICR);
+
+ return val;
+}
+
+static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv)
+{
+ writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR);
+}
+
+static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv)
+{
+ writel_relaxed(0, priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv)
+{
+ writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL,
+ priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv)
+{
+ u32 rate, val;
+ u32 scl, sysclock;
+
+ /* close all i2c interrupt */
+ val = readl_relaxed(priv->regs + HIX5I2C_CTRL);
+ writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL);
+
+ rate = priv->freq;
+ sysclock = clk_get_rate(priv->clk);
+ scl = (sysclock / (rate * 2)) / 2 - 1;
+ writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H);
+ writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L);
+
+ /* restore original interrupt*/
+ writel_relaxed(val, priv->regs + HIX5I2C_CTRL);
+
+ dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n",
+ __func__, sysclock, rate, scl);
+}
+
+static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv)
+{
+ hix5hd2_i2c_disable_irq(priv);
+ hix5hd2_i2c_drv_setrate(priv);
+ hix5hd2_i2c_clr_all_irq(priv);
+ hix5hd2_i2c_enable_irq(priv);
+}
+
+static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv)
+{
+ clk_disable_unprepare(priv->clk);
+ msleep(20);
+ clk_prepare_enable(priv->clk);
+ hix5hd2_i2c_init(priv);
+}
+
+static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv)
+{
+ unsigned long stop_time;
+ u32 int_status;
+
+ /* wait for 100 milli seconds for the bus to be idle */
+ stop_time = jiffies + msecs_to_jiffies(100);
+ do {
+ int_status = hix5hd2_i2c_clr_pend_irq(priv);
+ if (!(int_status & I2C_BUSY))
+ return 0;
+
+ usleep_range(50, 200);
+ } while (time_before(jiffies, stop_time));
+
+ return -EBUSY;
+}
+
+static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv)
+{
+ if (priv->state == HIX5I2C_STAT_SND_STOP)
+ dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__);
+ else
+ dev_dbg(priv->dev, "%s: have not data to send\n", __func__);
+
+ priv->state = HIX5I2C_STAT_RW_SUCCESS;
+ priv->err = 0;
+}
+
+static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv)
+{
+ if (priv->stop) {
+ priv->state = HIX5I2C_STAT_SND_STOP;
+ writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM);
+ } else {
+ hix5hd2_rw_over(priv);
+ }
+}
+
+static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv)
+{
+ if (priv->msg_len == 1) {
+ /* the last byte don't need send ACK */
+ writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM);
+ } else if (priv->msg_len > 1) {
+ /* if i2c master receive data will send ACK */
+ writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM);
+ } else {
+ hix5hd2_rw_handle_stop(priv);
+ }
+}
+
+static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv)
+{
+ u8 data;
+
+ if (priv->msg_len > 0) {
+ data = priv->msg->buf[priv->msg_idx++];
+ writel_relaxed(data, priv->regs + HIX5I2C_TXR);
+ writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM);
+ } else {
+ hix5hd2_rw_handle_stop(priv);
+ }
+}
+
+static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv)
+{
+ u8 data;
+
+ if (priv->state == HIX5I2C_STAT_INIT) {
+ priv->state = HIX5I2C_STAT_RW;
+ } else if (priv->state == HIX5I2C_STAT_RW) {
+ if (priv->msg->flags & I2C_M_RD) {
+ data = readl_relaxed(priv->regs + HIX5I2C_RXR);
+ priv->msg->buf[priv->msg_idx++] = data;
+ }
+ priv->msg_len--;
+ } else {
+ dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n",
+ __func__, priv->state, priv->msg_len);
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id)
+{
+ struct hix5hd2_i2c_priv *priv = dev_id;
+ u32 int_status;
+ int ret;
+
+ spin_lock(&priv->lock);
+
+ int_status = hix5hd2_i2c_clr_pend_irq(priv);
+
+ /* handle error */
+ if (int_status & I2C_ARBITRATE_INTR) {
+ /* bus error */
+ dev_dbg(priv->dev, "ARB bus loss\n");
+ priv->err = -EAGAIN;
+ priv->state = HIX5I2C_STAT_RW_ERR;
+ goto stop;
+ } else if (int_status & I2C_ACK_INTR) {
+ /* ack error */
+ dev_dbg(priv->dev, "No ACK from device\n");
+ priv->err = -ENXIO;
+ priv->state = HIX5I2C_STAT_RW_ERR;
+ goto stop;
+ }
+
+ if (int_status & I2C_OVER_INTR) {
+ if (priv->msg_len > 0) {
+ ret = hix5hd2_rw_preprocess(priv);
+ if (ret) {
+ priv->err = ret;
+ priv->state = HIX5I2C_STAT_RW_ERR;
+ goto stop;
+ }
+ if (priv->msg->flags & I2C_M_RD)
+ hix5hd2_read_handle(priv);
+ else
+ hix5hd2_write_handle(priv);
+ } else {
+ hix5hd2_rw_over(priv);
+ }
+ }
+
+stop:
+ if ((priv->state == HIX5I2C_STAT_RW_SUCCESS &&
+ priv->msg->len == priv->msg_idx) ||
+ (priv->state == HIX5I2C_STAT_RW_ERR)) {
+ hix5hd2_i2c_disable_irq(priv);
+ hix5hd2_i2c_clr_pend_irq(priv);
+ complete(&priv->msg_complete);
+ }
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ hix5hd2_i2c_clr_all_irq(priv);
+ hix5hd2_i2c_enable_irq(priv);
+
+ if (priv->msg->flags & I2C_M_RD)
+ writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
+ priv->regs + HIX5I2C_TXR);
+ else
+ writel_relaxed(priv->msg->addr << 1,
+ priv->regs + HIX5I2C_TXR);
+
+ writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
+ struct i2c_msg *msgs, int stop)
+{
+ unsigned long timeout;
+ int ret;
+
+ priv->msg = msgs;
+ priv->msg_idx = 0;
+ priv->msg_len = priv->msg->len;
+ priv->stop = stop;
+ priv->err = 0;
+ priv->state = HIX5I2C_STAT_INIT;
+
+ reinit_completion(&priv->msg_complete);
+ hix5hd2_i2c_message_start(priv, stop);
+
+ timeout = wait_for_completion_timeout(&priv->msg_complete,
+ priv->adap.timeout);
+ if (timeout == 0) {
+ priv->state = HIX5I2C_STAT_RW_ERR;
+ priv->err = -ETIMEDOUT;
+ dev_warn(priv->dev, "%s timeout=%d\n",
+ msgs->flags & I2C_M_RD ? "rx" : "tx",
+ priv->adap.timeout);
+ }
+ ret = priv->state;
+
+ /*
+ * If this is the last message to be transfered (stop == 1)
+ * Then check if the bus can be brought back to idle.
+ */
+ if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
+ ret = hix5hd2_i2c_wait_bus_idle(priv);
+
+ if (ret < 0)
+ hix5hd2_i2c_reset(priv);
+
+ return priv->err;
+}
+
+static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap);
+ int i, ret, stop;
+
+ pm_runtime_get_sync(priv->dev);
+
+ for (i = 0; i < num; i++, msgs++) {
+ stop = (i == num - 1);
+ ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (i == num) {
+ ret = num;
+ } else {
+ /* Only one message, cannot access the device */
+ if (i == 1)
+ ret = -EREMOTEIO;
+ else
+ ret = i;
+
+ dev_warn(priv->dev, "xfer message failed\n");
+ }
+
+out:
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+ return ret;
+}
+
+static u32 hix5hd2_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm hix5hd2_i2c_algorithm = {
+ .master_xfer = hix5hd2_i2c_xfer,
+ .functionality = hix5hd2_i2c_func,
+};
+
+static int hix5hd2_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct hix5hd2_i2c_priv *priv;
+ struct resource *mem;
+ unsigned int freq;
+ int irq, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ /* use 100k as default value */
+ priv->freq = 100000;
+ } else {
+ if (freq > HIX5I2C_MAX_FREQ) {
+ priv->freq = HIX5I2C_MAX_FREQ;
+ dev_warn(priv->dev, "use max freq %d instead\n",
+ HIX5I2C_MAX_FREQ);
+ } else {
+ priv->freq = freq;
+ }
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(priv->regs))
+ return PTR_ERR(priv->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+ return irq;
+ }
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+ clk_prepare_enable(priv->clk);
+
+ strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name));
+ priv->dev = &pdev->dev;
+ priv->adap.owner = THIS_MODULE;
+ priv->adap.algo = &hix5hd2_i2c_algorithm;
+ priv->adap.retries = 3;
+ priv->adap.dev.of_node = np;
+ priv->adap.algo_data = priv;
+ priv->adap.dev.parent = &pdev->dev;
+ i2c_set_adapdata(&priv->adap, priv);
+ platform_set_drvdata(pdev, priv);
+ spin_lock_init(&priv->lock);
+ init_completion(&priv->msg_complete);
+
+ hix5hd2_i2c_init(priv);
+
+ ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq,
+ IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ dev_name(&pdev->dev), priv);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
+ goto err_clk;
+ }
+
+ pm_suspend_ignore_children(&pdev->dev, true);
+ pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
+ pm_runtime_use_autosuspend(priv->dev);
+ pm_runtime_set_active(priv->dev);
+ pm_runtime_enable(priv->dev);
+
+ ret = i2c_add_adapter(&priv->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_runtime;
+ }
+
+ return ret;
+
+err_runtime:
+ pm_runtime_disable(priv->dev);
+ pm_runtime_set_suspended(priv->dev);
+err_clk:
+ clk_disable_unprepare(priv->clk);
+ return ret;
+}
+
+static int hix5hd2_i2c_remove(struct platform_device *pdev)
+{
+ struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&priv->adap);
+ pm_runtime_disable(priv->dev);
+ pm_runtime_set_suspended(priv->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int hix5hd2_i2c_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static int hix5hd2_i2c_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ clk_prepare_enable(priv->clk);
+ hix5hd2_i2c_init(priv);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
+ SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+ hix5hd2_i2c_runtime_resume,
+ NULL)
+};
+
+static const struct of_device_id hix5hd2_i2c_match[] = {
+ { .compatible = "hisilicon,hix5hd2-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match);
+
+static struct platform_driver hix5hd2_i2c_driver = {
+ .probe = hix5hd2_i2c_probe,
+ .remove = hix5hd2_i2c_remove,
+ .driver = {
+ .name = "hix5hd2-i2c",
+ .pm = &hix5hd2_i2c_pm_ops,
+ .of_match_table = hix5hd2_i2c_match,
+ },
+};
+
+module_platform_driver(hix5hd2_i2c_driver);
+
+MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
+MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-hix5hd2");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 10467a327749..7cfc183b3d63 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,7 @@
* Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
* BayTrail (SOC) 0x0f12 32 hard yes yes yes
+ * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -184,6 +185,7 @@
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
struct i801_mux_config {
char *gpio_chip;
@@ -830,6 +832,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 613069bc561a..c48e46af670a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -268,6 +268,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
while (1) {
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+
+ /* check for arbitration lost */
+ if (temp & I2SR_IAL) {
+ temp &= ~I2SR_IAL;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ return -EAGAIN;
+ }
+
if (for_busy && (temp & I2SR_IBB))
break;
if (!for_busy && !(temp & I2SR_IBB))
@@ -702,7 +710,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
pdev->name, i2c_imx);
if (ret) {
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
- return ret;
+ goto clk_disable;
}
/* Init queue */
@@ -727,7 +735,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "registration failed\n");
- return ret;
+ goto clk_disable;
}
/* Set up platform driver data */
@@ -741,6 +749,10 @@ static int i2c_imx_probe(struct platform_device *pdev)
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
return 0; /* Return OK */
+
+clk_disable:
+ clk_disable_unprepare(i2c_imx->clk);
+ return ret;
}
static int i2c_imx_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index d9ee43c80cde..3f6ecbfb9a56 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -81,7 +81,7 @@
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
-#define ISMT_DESC_ENTRIES 32 /* number of descriptor entries */
+#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */
#define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */
/* Hardware Descriptor Constants - Control Field */
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 65a21fed08b5..07e1be6f8992 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -307,6 +307,9 @@ static int mxs_i2c_pio_wait_xfer_end(struct mxs_i2c_dev *i2c)
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
while (readl(i2c->regs + MXS_I2C_CTRL0) & MXS_I2C_CTRL0_RUN) {
+ if (readl(i2c->regs + MXS_I2C_CTRL1) &
+ MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
+ return -ENXIO;
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
cond_resched();
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index e506fcd3ca04..d826e82dd997 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -195,7 +195,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
*/
rate = clk_get_rate(priv->clk);
cdf = rate / 20000000;
- if (cdf >= 1 << cdf_width) {
+ if (cdf >= 1U << cdf_width) {
dev_err(dev, "Input clock %lu too high\n", rate);
return -EIO;
}
@@ -245,7 +245,7 @@ scgd_find:
return 0;
}
-static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
+static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
{
int read = !!rcar_i2c_is_recv(priv);
@@ -253,8 +253,6 @@ static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMSR, 0);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
-
- return 0;
}
/*
@@ -365,6 +363,7 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
{
struct rcar_i2c_priv *priv = ptr;
+ irqreturn_t result = IRQ_HANDLED;
u32 msr;
/*-------------- spin lock -----------------*/
@@ -374,6 +373,10 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
/* Only handle interrupts that are currently enabled */
msr &= rcar_i2c_read(priv, ICMIER);
+ if (!msr) {
+ result = IRQ_NONE;
+ goto exit;
+ }
/* Arbitration lost */
if (msr & MAL) {
@@ -408,10 +411,11 @@ out:
wake_up(&priv->wait);
}
+exit:
spin_unlock(&priv->lock);
/*-------------- spin unlock -----------------*/
- return IRQ_HANDLED;
+ return result;
}
static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
@@ -453,17 +457,14 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
priv->msg = &msgs[i];
priv->pos = 0;
priv->flags = 0;
- if (priv->msg == &msgs[num - 1])
+ if (i == num - 1)
rcar_i2c_flags_set(priv, ID_LAST_MSG);
- ret = rcar_i2c_prepare_msg(priv);
+ rcar_i2c_prepare_msg(priv);
spin_unlock_irqrestore(&priv->lock, flags);
/*-------------- spin unlock -----------------*/
- if (ret < 0)
- break;
-
timeout = wait_event_timeout(priv->wait,
rcar_i2c_flags_has(priv, ID_DONE),
5 * HZ);
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index b38b0529946a..f486d0eac4d0 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -208,7 +208,7 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
* The hw can read up to 32 bytes at a time. If we need more than one
* chunk, send an ACK after the last byte of the current chunk.
*/
- if (unlikely(len > 32)) {
+ if (len > 32) {
len = 32;
con &= ~REG_CON_LASTACK;
} else {
@@ -403,7 +403,7 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
}
/* is there anything left to handle? */
- if (unlikely((ipd & REG_INT_ALL) == 0))
+ if ((ipd & REG_INT_ALL) == 0)
goto out;
switch (i2c->state) {
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7853a6410d14..a49cd41feea7 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1928,9 +1928,6 @@ struct ec_response_power_info {
#define EC_CMD_I2C_PASSTHRU 0x9e
-/* Slave address is 10 (not 7) bit */
-#define EC_I2C_FLAG_10BIT (1 << 16)
-
/* Read data; if not present, message is a write */
#define EC_I2C_FLAG_READ (1 << 15)
diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h
new file mode 100644
index 000000000000..7a61fb27c25b
--- /dev/null
+++ b/include/linux/platform_data/i2c-designware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright(c) 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef I2C_DESIGNWARE_H
+#define I2C_DESIGNWARE_H
+
+struct dw_i2c_platform_data {
+ unsigned int i2c_scl_freq;
+};
+
+#endif