summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/char/Kconfig254
-rw-r--r--drivers/tty/Kconfig150
-rw-r--r--drivers/tty/hvc/Kconfig105
3 files changed, 257 insertions, 252 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 17f9b968b988..9b9ab867f50e 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,89 +4,7 @@
menu "Character devices"
-config VT
- bool "Virtual terminal" if EXPERT
- depends on !S390
- select INPUT
- default y
- ---help---
- If you say Y here, you will get support for terminal devices with
- display and keyboard devices. These are called "virtual" because you
- can run several virtual terminals (also called virtual consoles) on
- one physical terminal. This is rather useful, for example one
- virtual terminal can collect system messages and warnings, another
- one can be used for a text-mode user session, and a third could run
- an X session, all in parallel. Switching between virtual terminals
- is done with certain key combinations, usually Alt-<function key>.
-
- The setterm command ("man setterm") can be used to change the
- properties (such as colors or beeping) of a virtual terminal. The
- man page console_codes(4) ("man console_codes") contains the special
- character sequences that can be used to change those properties
- directly. The fonts used on virtual terminals can be changed with
- the setfont ("man setfont") command and the key bindings are defined
- with the loadkeys ("man loadkeys") command.
-
- You need at least one virtual terminal device in order to make use
- of your keyboard and monitor. Therefore, only people configuring an
- embedded system would want to say N here in order to save some
- memory; the only way to log into such a system is then via a serial
- or network connection.
-
- If unsure, say Y, or else you won't be able to do much with your new
- shiny Linux system :-)
-
-config CONSOLE_TRANSLATIONS
- depends on VT
- default y
- bool "Enable character translations in console" if EXPERT
- ---help---
- This enables support for font mapping and Unicode translation
- on virtual consoles.
-
-config VT_CONSOLE
- bool "Support for console on virtual terminal" if EXPERT
- depends on VT
- default y
- ---help---
- The system console is the device which receives all kernel messages
- and warnings and which allows logins in single user mode. If you
- answer Y here, a virtual terminal (the device used to interact with
- a physical terminal) can be used as system console. This is the most
- common mode of operations, so you should say Y here unless you want
- the kernel messages be output only to a serial port (in which case
- you should say Y to "Console on serial port", below).
-
- If you do say Y here, by default the currently visible virtual
- terminal (/dev/tty0) will be used as system console. You can change
- that with a kernel command line option such as "console=tty3" which
- would use the third virtual terminal as system console. (Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel at boot time.)
-
- If unsure, say Y.
-
-config HW_CONSOLE
- bool
- depends on VT && !S390 && !UML
- default y
-
-config VT_HW_CONSOLE_BINDING
- bool "Support for binding and unbinding console drivers"
- depends on HW_CONSOLE
- default n
- ---help---
- The virtual terminal is the device that interacts with the physical
- terminal through console drivers. On these systems, at least one
- console driver is loaded. In other configurations, additional console
- drivers may be enabled, such as the framebuffer console. If more than
- 1 console driver is enabled, setting this to 'y' will allow you to
- select the console driver that will serve as the backend for the
- virtual terminals.
-
- See <file:Documentation/console/console.txt> for more
- information. For framebuffer console users, please refer to
- <file:Documentation/fb/fbcon.txt>.
+source "drivers/tty/Kconfig"
config DEVKMEM
bool "/dev/kmem virtual device support"
@@ -428,71 +346,6 @@ config SGI_MBCS
source "drivers/tty/serial/Kconfig"
-config UNIX98_PTYS
- bool "Unix98 PTY support" if EXPERT
- default y
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- All modern Linux systems use the Unix98 ptys. Say Y unless
- you're on an embedded system and want to conserve memory.
-
-config DEVPTS_MULTIPLE_INSTANCES
- bool "Support multiple instances of devpts"
- depends on UNIX98_PTYS
- default n
- ---help---
- Enable support for multiple instances of devpts filesystem.
- If you want to have isolated PTY namespaces (eg: in containers),
- say Y here. Otherwise, say N. If enabled, each mount of devpts
- filesystem with the '-o newinstance' option will create an
- independent PTY namespace.
-
-config LEGACY_PTYS
- bool "Legacy (BSD) PTY support"
- default y
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx
- for masters and /dev/ttyxx for slaves of pseudo
- terminals. This scheme has a number of problems, including
- security. This option enables these legacy devices; on most
- systems, it is safe to say N.
-
-
-config LEGACY_PTY_COUNT
- int "Maximum number of legacy PTY in use"
- depends on LEGACY_PTYS
- range 0 256
- default "256"
- ---help---
- The maximum number of legacy PTYs that can be used at any one time.
- The default is 256, and should be more than enough. Embedded
- systems may want to reduce this to save memory.
-
- When not in use, each legacy PTY occupies 12 bytes on 32-bit
- architectures and 24 bytes on 64-bit architectures.
-
config TTY_PRINTK
bool "TTY driver to output user messages via printk"
depends on EXPERT
@@ -612,93 +465,7 @@ config PPDEV
If unsure, say N.
-config HVC_DRIVER
- bool
- help
- Generic "hypervisor virtual console" infrastructure for various
- hypervisors (pSeries, iSeries, Xen, lguest).
- It will automatically be selected if one of the back-end console drivers
- is selected.
-
-config HVC_IRQ
- bool
-
-config HVC_CONSOLE
- bool "pSeries Hypervisor Virtual Console support"
- depends on PPC_PSERIES
- select HVC_DRIVER
- select HVC_IRQ
- help
- pSeries machines when partitioned support a hypervisor virtual
- console. This driver allows each pSeries partition to have a console
- which is accessed via the HMC.
-
-config HVC_ISERIES
- bool "iSeries Hypervisor Virtual Console support"
- depends on PPC_ISERIES
- default y
- select HVC_DRIVER
- select HVC_IRQ
- select VIOPATH
- help
- iSeries machines support a hypervisor virtual console.
-
-config HVC_RTAS
- bool "IBM RTAS Console support"
- depends on PPC_RTAS
- select HVC_DRIVER
- help
- IBM Console device driver which makes use of RTAS
-
-config HVC_BEAT
- bool "Toshiba's Beat Hypervisor Console support"
- depends on PPC_CELLEB
- select HVC_DRIVER
- help
- Toshiba's Cell Reference Set Beat Console device driver
-
-config HVC_IUCV
- bool "z/VM IUCV Hypervisor console support (VM only)"
- depends on S390
- select HVC_DRIVER
- select IUCV
- default y
- help
- This driver provides a Hypervisor console (HVC) back-end to access
- a Linux (console) terminal via a z/VM IUCV communication path.
-
-config HVC_XEN
- bool "Xen Hypervisor Console support"
- depends on XEN
- select HVC_DRIVER
- select HVC_IRQ
- default y
- help
- Xen virtual console device driver
-
-config HVC_UDBG
- bool "udbg based fake hypervisor console"
- depends on PPC && EXPERIMENTAL
- select HVC_DRIVER
- default n
-
-config HVC_DCC
- bool "ARM JTAG DCC console"
- depends on ARM
- select HVC_DRIVER
- help
- This console uses the JTAG DCC on ARM to create a console under the HVC
- driver. This console is used through a JTAG only on ARM. If you don't have
- a JTAG then you probably don't want this option.
-
-config HVC_BFIN_JTAG
- bool "Blackfin JTAG console"
- depends on BLACKFIN
- select HVC_DRIVER
- help
- This console uses the Blackfin JTAG to create a console under the
- the HVC driver. If you don't have JTAG, then you probably don't
- want this option.
+source "drivers/tty/hvc/Kconfig"
config VIRTIO_CONSOLE
tristate "Virtio console"
@@ -716,23 +483,6 @@ config VIRTIO_CONSOLE
the port which can be used by udev scripts to create a
symlink to the device.
-config HVCS
- tristate "IBM Hypervisor Virtual Console Server support"
- depends on PPC_PSERIES && HVC_CONSOLE
- help
- Partitionable IBM Power5 ppc64 machines allow hosting of
- firmware virtual consoles from one Linux partition by
- another Linux partition. This driver allows console data
- from Linux partitions to be accessed through TTY device
- interfaces in the device tree of a Linux partition running
- this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called hvcs. Additionally, this module
- will depend on arch specific APIs exported from hvcserver.ko
- which will also be compiled when this driver is built as a
- module.
-
config IBM_BSR
tristate "IBM POWER Barrier Synchronization Register support"
depends on PPC_PSERIES
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 000000000000..9cfbdb318ed9
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,150 @@
+config VT
+ bool "Virtual terminal" if EXPERT
+ depends on !S390
+ select INPUT
+ default y
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+ depends on VT
+ default y
+ bool "Enable character translations in console" if EXPERT
+ ---help---
+ This enables support for font mapping and Unicode translation
+ on virtual consoles.
+
+config VT_CONSOLE
+ bool "Support for console on virtual terminal" if EXPERT
+ depends on VT
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+ default y
+
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
+config UNIX98_PTYS
+ bool "Unix98 PTY support" if EXPERT
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx for
+ masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+ has a number of problems. The GNU C library glibc 2.1 and later,
+ however, supports the Unix98 naming standard: in order to acquire a
+ pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+ terminal is then made available to the process and the pseudo
+ terminal slave can be accessed as /dev/pts/<number>. What was
+ traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+ All modern Linux systems use the Unix98 ptys. Say Y unless
+ you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+ bool "Support multiple instances of devpts"
+ depends on UNIX98_PTYS
+ default n
+ ---help---
+ Enable support for multiple instances of devpts filesystem.
+ If you want to have isolated PTY namespaces (eg: in containers),
+ say Y here. Otherwise, say N. If enabled, each mount of devpts
+ filesystem with the '-o newinstance' option will create an
+ independent PTY namespace.
+
+config LEGACY_PTYS
+ bool "Legacy (BSD) PTY support"
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx
+ for masters and /dev/ttyxx for slaves of pseudo
+ terminals. This scheme has a number of problems, including
+ security. This option enables these legacy devices; on most
+ systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+ int "Maximum number of legacy PTY in use"
+ depends on LEGACY_PTYS
+ range 0 256
+ default "256"
+ ---help---
+ The maximum number of legacy PTYs that can be used at any one time.
+ The default is 256, and should be more than enough. Embedded
+ systems may want to reduce this to save memory.
+
+ When not in use, each legacy PTY occupies 12 bytes on 32-bit
+ architectures and 24 bytes on 64-bit architectures.
+
+
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
new file mode 100644
index 000000000000..6f2c9809f1fb
--- /dev/null
+++ b/drivers/tty/hvc/Kconfig
@@ -0,0 +1,105 @@
+config HVC_DRIVER
+ bool
+ help
+ Generic "hypervisor virtual console" infrastructure for various
+ hypervisors (pSeries, iSeries, Xen, lguest).
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+config HVC_IRQ
+ bool
+
+config HVC_CONSOLE
+ bool "pSeries Hypervisor Virtual Console support"
+ depends on PPC_PSERIES
+ select HVC_DRIVER
+ select HVC_IRQ
+ help
+ pSeries machines when partitioned support a hypervisor virtual
+ console. This driver allows each pSeries partition to have a console
+ which is accessed via the HMC.
+
+config HVC_ISERIES
+ bool "iSeries Hypervisor Virtual Console support"
+ depends on PPC_ISERIES
+ default y
+ select HVC_DRIVER
+ select HVC_IRQ
+ select VIOPATH
+ help
+ iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
+config HVC_BEAT
+ bool "Toshiba's Beat Hypervisor Console support"
+ depends on PPC_CELLEB
+ select HVC_DRIVER
+ help
+ Toshiba's Cell Reference Set Beat Console device driver
+
+config HVC_IUCV
+ bool "z/VM IUCV Hypervisor console support (VM only)"
+ depends on S390
+ select HVC_DRIVER
+ select IUCV
+ default y
+ help
+ This driver provides a Hypervisor console (HVC) back-end to access
+ a Linux (console) terminal via a z/VM IUCV communication path.
+
+config HVC_XEN
+ bool "Xen Hypervisor Console support"
+ depends on XEN
+ select HVC_DRIVER
+ select HVC_IRQ
+ default y
+ help
+ Xen virtual console device driver
+
+config HVC_UDBG
+ bool "udbg based fake hypervisor console"
+ depends on PPC && EXPERIMENTAL
+ select HVC_DRIVER
+ default n
+
+config HVC_DCC
+ bool "ARM JTAG DCC console"
+ depends on ARM
+ select HVC_DRIVER
+ help
+ This console uses the JTAG DCC on ARM to create a console under the HVC
+ driver. This console is used through a JTAG only on ARM. If you don't have
+ a JTAG then you probably don't want this option.
+
+config HVC_BFIN_JTAG
+ bool "Blackfin JTAG console"
+ depends on BLACKFIN
+ select HVC_DRIVER
+ help
+ This console uses the Blackfin JTAG to create a console under the
+ the HVC driver. If you don't have JTAG, then you probably don't
+ want this option.
+
+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES && HVC_CONSOLE
+ help
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hvcs. Additionally, this module
+ will depend on arch specific APIs exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
+