summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS7
-rw-r--r--arch/arm/Kconfig18
-rw-r--r--arch/arm/Kconfig.debug4
-rw-r--r--arch/arm/Makefile3
-rw-r--r--arch/arm/common/gic.c2
-rw-r--r--arch/arm/common/locomo.c84
-rw-r--r--arch/arm/common/sa1111.c30
-rw-r--r--arch/arm/common/vic.c8
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig11
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig11
-rw-r--r--arch/arm/configs/at91sam9260ek_defconfig950
-rw-r--r--arch/arm/configs/at91sam9261ek_defconfig1106
-rw-r--r--arch/arm/configs/badge4_defconfig1
-rw-r--r--arch/arm/configs/carmeva_defconfig2
-rw-r--r--arch/arm/configs/cerfcube_defconfig1
-rw-r--r--arch/arm/configs/collie_defconfig1
-rw-r--r--arch/arm/configs/corgi_defconfig1
-rw-r--r--arch/arm/configs/csb337_defconfig1
-rw-r--r--arch/arm/configs/csb637_defconfig3
-rw-r--r--arch/arm/configs/ep93xx_defconfig2
-rw-r--r--arch/arm/configs/h7202_defconfig1
-rw-r--r--arch/arm/configs/hackkit_defconfig1
-rw-r--r--arch/arm/configs/integrator_defconfig1
-rw-r--r--arch/arm/configs/iop13xx_defconfig1134
-rw-r--r--arch/arm/configs/iop32x_defconfig1
-rw-r--r--arch/arm/configs/iop33x_defconfig1
-rw-r--r--arch/arm/configs/ixp2000_defconfig1
-rw-r--r--arch/arm/configs/ixp23xx_defconfig1
-rw-r--r--arch/arm/configs/ixp4xx_defconfig1
-rw-r--r--arch/arm/configs/jornada720_defconfig1
-rw-r--r--arch/arm/configs/kb9202_defconfig3
-rw-r--r--arch/arm/configs/lpd270_defconfig1
-rw-r--r--arch/arm/configs/lpd7a400_defconfig1
-rw-r--r--arch/arm/configs/lpd7a404_defconfig1
-rw-r--r--arch/arm/configs/lubbock_defconfig1
-rw-r--r--arch/arm/configs/mainstone_defconfig1
-rw-r--r--arch/arm/configs/mx1ads_defconfig1
-rw-r--r--arch/arm/configs/neponset_defconfig1
-rw-r--r--arch/arm/configs/netwinder_defconfig1
-rw-r--r--arch/arm/configs/netx_defconfig1
-rw-r--r--arch/arm/configs/onearm_defconfig1
-rw-r--r--arch/arm/configs/pleb_defconfig1
-rw-r--r--arch/arm/configs/pnx4008_defconfig1
-rw-r--r--arch/arm/configs/pxa255-idp_defconfig1
-rw-r--r--arch/arm/configs/realview-smp_defconfig1
-rw-r--r--arch/arm/configs/realview_defconfig1
-rw-r--r--arch/arm/configs/rpc_defconfig1
-rw-r--r--arch/arm/configs/s3c2410_defconfig1
-rw-r--r--arch/arm/configs/shark_defconfig1
-rw-r--r--arch/arm/configs/simpad_defconfig1
-rw-r--r--arch/arm/configs/spitz_defconfig1
-rw-r--r--arch/arm/configs/versatile_defconfig1
-rw-r--r--arch/arm/kernel/Makefile4
-rw-r--r--arch/arm/kernel/apm.c187
-rw-r--r--arch/arm/kernel/asm-offsets.c1
-rw-r--r--arch/arm/kernel/ecard.c10
-rw-r--r--arch/arm/kernel/entry-armv.S9
-rw-r--r--arch/arm/kernel/head-nommu.S1
-rw-r--r--arch/arm/kernel/head.S1
-rw-r--r--arch/arm/kernel/irq.c8
-rw-r--r--arch/arm/kernel/iwmmxt-notifier.c63
-rw-r--r--arch/arm/kernel/process.c61
-rw-r--r--arch/arm/kernel/setup.c14
-rw-r--r--arch/arm/kernel/signal.c1
-rw-r--r--arch/arm/kernel/traps.c7
-rw-r--r--arch/arm/kernel/xscale-cp0.c179
-rw-r--r--arch/arm/mach-aaec2000/core.c4
-rw-r--r--arch/arm/mach-at91rm9200/Kconfig36
-rw-r--r--arch/arm/mach-at91rm9200/Makefile12
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200.c42
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200_devices.c (renamed from arch/arm/mach-at91rm9200/devices.c)160
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200_time.c5
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9260.c294
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9260_devices.c866
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9261.c289
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9261_devices.c741
-rw-r--r--arch/arm/mach-at91rm9200/at91sam926x_time.c114
-rw-r--r--arch/arm/mach-at91rm9200/board-carmeva.c32
-rw-r--r--arch/arm/mach-at91rm9200/board-csb337.c2
-rw-r--r--arch/arm/mach-at91rm9200/board-dk.c30
-rw-r--r--arch/arm/mach-at91rm9200/board-eb9200.c2
-rw-r--r--arch/arm/mach-at91rm9200/board-ek.c30
-rw-r--r--arch/arm/mach-at91rm9200/board-kb9202.c2
-rw-r--r--arch/arm/mach-at91rm9200/board-sam9260ek.c201
-rw-r--r--arch/arm/mach-at91rm9200/board-sam9261ek.c259
-rw-r--r--arch/arm/mach-at91rm9200/clock.c27
-rw-r--r--arch/arm/mach-at91rm9200/clock.h1
-rw-r--r--arch/arm/mach-at91rm9200/generic.h8
-rw-r--r--arch/arm/mach-at91rm9200/gpio.c10
-rw-r--r--arch/arm/mach-at91rm9200/irq.c16
-rw-r--r--arch/arm/mach-at91rm9200/pm.c24
-rw-r--r--arch/arm/mach-clps711x/irq.c8
-rw-r--r--arch/arm/mach-clps7500/core.c28
-rw-r--r--arch/arm/mach-ebsa110/core.c4
-rw-r--r--arch/arm/mach-ep93xx/Kconfig12
-rw-r--r--arch/arm/mach-ep93xx/Makefile2
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c91
-rw-r--r--arch/arm/mach-ep93xx/core.c6
-rw-r--r--arch/arm/mach-ep93xx/edb9302a.c91
-rw-r--r--arch/arm/mach-footbridge/common.c4
-rw-r--r--arch/arm/mach-footbridge/isa-irq.c10
-rw-r--r--arch/arm/mach-h720x/common.c22
-rw-r--r--arch/arm/mach-h720x/cpu-h7202.c6
-rw-r--r--arch/arm/mach-imx/generic.c9
-rw-r--r--arch/arm/mach-imx/irq.c14
-rw-r--r--arch/arm/mach-imx/time.c86
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c8
-rw-r--r--arch/arm/mach-integrator/platsmp.c1
-rw-r--r--arch/arm/mach-iop13xx/Kconfig20
-rw-r--r--arch/arm/mach-iop13xx/Makefile12
-rw-r--r--arch/arm/mach-iop13xx/Makefile.boot3
-rw-r--r--arch/arm/mach-iop13xx/io.c93
-rw-r--r--arch/arm/mach-iop13xx/iq81340mc.c98
-rw-r--r--arch/arm/mach-iop13xx/iq81340sc.c100
-rw-r--r--arch/arm/mach-iop13xx/irq.c286
-rw-r--r--arch/arm/mach-iop13xx/pci.c1113
-rw-r--r--arch/arm/mach-iop13xx/setup.c406
-rw-r--r--arch/arm/mach-iop13xx/time.c102
-rw-r--r--arch/arm/mach-iop32x/irq.c2
-rw-r--r--arch/arm/mach-iop33x/irq.c2
-rw-r--r--arch/arm/mach-ixp2000/core.c20
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x00.c8
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x01.c8
-rw-r--r--arch/arm/mach-ixp2000/pci.c2
-rw-r--r--arch/arm/mach-ixp23xx/core.c16
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c16
-rw-r--r--arch/arm/mach-ixp23xx/pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/common.c51
-rw-r--r--arch/arm/mach-l7200/core.c4
-rw-r--r--arch/arm/mach-lh7a40x/arch-kev7a400.c4
-rw-r--r--arch/arm/mach-lh7a40x/arch-lpd7a40x.c4
-rw-r--r--arch/arm/mach-lh7a40x/irq-kev7a400.c4
-rw-r--r--arch/arm/mach-lh7a40x/irq-lh7a400.c4
-rw-r--r--arch/arm/mach-lh7a40x/irq-lh7a404.c4
-rw-r--r--arch/arm/mach-lh7a40x/irq-lpd7a40x.c4
-rw-r--r--arch/arm/mach-netx/generic.c6
-rw-r--r--arch/arm/mach-omap1/fpga.c6
-rw-r--r--arch/arm/mach-omap1/irq.c2
-rw-r--r--arch/arm/mach-omap2/irq.c2
-rw-r--r--arch/arm/mach-pnx4008/irq.c10
-rw-r--r--arch/arm/mach-pxa/Kconfig8
-rw-r--r--arch/arm/mach-pxa/generic.c60
-rw-r--r--arch/arm/mach-pxa/irq.c10
-rw-r--r--arch/arm/mach-pxa/lpd270.c4
-rw-r--r--arch/arm/mach-pxa/lubbock.c4
-rw-r--r--arch/arm/mach-pxa/mainstone.c4
-rw-r--r--arch/arm/mach-pxa/pm.c3
-rw-r--r--arch/arm/mach-pxa/time.c7
-rw-r--r--arch/arm/mach-rpc/irq.c14
-rw-r--r--arch/arm/mach-s3c2410/Kconfig8
-rw-r--r--arch/arm/mach-s3c2410/Makefile1
-rw-r--r--arch/arm/mach-s3c2410/bast-irq.c8
-rw-r--r--arch/arm/mach-s3c2410/irq.c63
-rw-r--r--arch/arm/mach-s3c2410/irq.h2
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c8
-rw-r--r--arch/arm/mach-s3c2410/mach-osiris.c9
-rw-r--r--arch/arm/mach-s3c2410/mach-rx3715.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c50
-rw-r--r--arch/arm/mach-s3c2410/pm-h1940.S33
-rw-r--r--arch/arm/mach-s3c2410/s3c2410-pm.c30
-rw-r--r--arch/arm/mach-s3c2410/s3c2412-irq.c4
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-irq.c10
-rw-r--r--arch/arm/mach-s3c2410/s3c244x-irq.c12
-rw-r--r--arch/arm/mach-sa1100/generic.c15
-rw-r--r--arch/arm/mach-sa1100/h3600.c6
-rw-r--r--arch/arm/mach-sa1100/irq.c8
-rw-r--r--arch/arm/mach-sa1100/neponset.c8
-rw-r--r--arch/arm/mach-sa1100/time.c7
-rw-r--r--arch/arm/mach-shark/irq.c2
-rw-r--r--arch/arm/mach-versatile/core.c18
-rw-r--r--arch/arm/mach-versatile/versatile_pb.c18
-rw-r--r--arch/arm/mm/Kconfig4
-rw-r--r--arch/arm/mm/mm.h5
-rw-r--r--arch/arm/mm/mmu.c9
-rw-r--r--arch/arm/mm/nommu.c4
-rw-r--r--arch/arm/mm/proc-arm1020.S2
-rw-r--r--arch/arm/mm/proc-arm1020e.S2
-rw-r--r--arch/arm/mm/proc-arm1022.S2
-rw-r--r--arch/arm/mm/proc-arm1026.S2
-rw-r--r--arch/arm/mm/proc-arm6_7.S2
-rw-r--r--arch/arm/mm/proc-arm720.S2
-rw-r--r--arch/arm/mm/proc-arm740.S2
-rw-r--r--arch/arm/mm/proc-arm7tdmi.S2
-rw-r--r--arch/arm/mm/proc-arm920.S2
-rw-r--r--arch/arm/mm/proc-arm922.S2
-rw-r--r--arch/arm/mm/proc-arm925.S2
-rw-r--r--arch/arm/mm/proc-arm926.S2
-rw-r--r--arch/arm/mm/proc-arm940.S2
-rw-r--r--arch/arm/mm/proc-arm946.S2
-rw-r--r--arch/arm/mm/proc-arm9tdmi.S2
-rw-r--r--arch/arm/mm/proc-sa110.S2
-rw-r--r--arch/arm/mm/proc-sa1100.S2
-rw-r--r--arch/arm/mm/proc-v6.S2
-rw-r--r--arch/arm/mm/proc-xsc3.S13
-rw-r--r--arch/arm/mm/proc-xscale.S11
-rw-r--r--arch/arm/plat-omap/gpio.c8
-rw-r--r--arch/arm/tools/mach-types58
-rw-r--r--drivers/amba/bus.c113
-rw-r--r--drivers/char/watchdog/at91rm9200_wdt.c1
-rw-r--r--drivers/i2c/busses/Kconfig6
-rw-r--r--drivers/i2c/busses/i2c-pxa.c131
-rw-r--r--drivers/mmc/Kconfig8
-rw-r--r--drivers/mmc/Makefile2
-rw-r--r--drivers/mmc/at91_mci.c4
-rw-r--r--drivers/pcmcia/at91_cf.c2
-rw-r--r--drivers/serial/atmel_serial.c10
-rw-r--r--drivers/serial/atmel_serial.h11
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/host/ohci-hcd.c5
-rw-r--r--include/asm-arm/arch-aaec2000/memory.h40
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_aic.h53
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_dbgu.h45
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_ecc.h38
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_lcdc.h148
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_mci.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_mci.h)24
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_pdc.h (renamed from include/asm-avr32/arch-at32ap/at91rm9200_pdc.h)6
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_pio.h49
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_pit.h29
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_pmc.h92
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_rstc.h39
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_rtc.h75
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_rtt.h32
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_shdwc.h33
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_spi.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_spi.h)8
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_ssc.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h)16
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_st.h49
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_tc.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_tc.h)6
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_twi.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_twi.h)10
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_wdt.h34
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200.h16
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_mc.h160
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_sys.h438
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_udp.h77
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9260.h125
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h78
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9261.h292
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h62
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam926x_mc.h134
-rw-r--r--include/asm-arm/arch-at91rm9200/board.h6
-rw-r--r--include/asm-arm/arch-at91rm9200/cpu.h49
-rw-r--r--include/asm-arm/arch-at91rm9200/debug-macro.S1
-rw-r--r--include/asm-arm/arch-at91rm9200/entry-macro.S1
-rw-r--r--include/asm-arm/arch-at91rm9200/hardware.h40
-rw-r--r--include/asm-arm/arch-at91rm9200/irqs.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/system.h20
-rw-r--r--include/asm-arm/arch-at91rm9200/timex.h9
-rw-r--r--include/asm-arm/arch-at91rm9200/uncompress.h4
-rw-r--r--include/asm-arm/arch-at91rm9200/vmalloc.h2
-rw-r--r--include/asm-arm/arch-clps711x/memory.h53
-rw-r--r--include/asm-arm/arch-imx/timex.h3
-rw-r--r--include/asm-arm/arch-iop13xx/debug-macro.S26
-rw-r--r--include/asm-arm/arch-iop13xx/dma.h3
-rw-r--r--include/asm-arm/arch-iop13xx/entry-macro.S39
-rw-r--r--include/asm-arm/arch-iop13xx/hardware.h28
-rw-r--r--include/asm-arm/arch-iop13xx/io.h41
-rw-r--r--include/asm-arm/arch-iop13xx/iop13xx.h492
-rw-r--r--include/asm-arm/arch-iop13xx/iq81340.h31
-rw-r--r--include/asm-arm/arch-iop13xx/irqs.h207
-rw-r--r--include/asm-arm/arch-iop13xx/memory.h64
-rw-r--r--include/asm-arm/arch-iop13xx/pci.h57
-rw-r--r--include/asm-arm/arch-iop13xx/system.h59
-rw-r--r--include/asm-arm/arch-iop13xx/timex.h3
-rw-r--r--include/asm-arm/arch-iop13xx/uncompress.h24
-rw-r--r--include/asm-arm/arch-iop13xx/vmalloc.h4
-rw-r--r--include/asm-arm/arch-ixp4xx/nslu2.h5
-rw-r--r--include/asm-arm/arch-ixp4xx/udc.h8
-rw-r--r--include/asm-arm/arch-l7200/io.h56
-rw-r--r--include/asm-arm/arch-lh7a40x/memory.h12
-rw-r--r--include/asm-arm/arch-pxa/memory.h36
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h13
-rw-r--r--include/asm-arm/arch-s3c2410/h1940.h21
-rw-r--r--include/asm-arm/arch-s3c2410/system.h2
-rw-r--r--include/asm-arm/arch-sa1100/jornada720.h42
-rw-r--r--include/asm-arm/arch-sa1100/memory.h34
-rw-r--r--include/asm-arm/bug.h4
-rw-r--r--include/asm-arm/cnt32_to_63.h78
-rw-r--r--include/asm-arm/div64.h180
-rw-r--r--include/asm-arm/elf.h150
-rw-r--r--include/asm-arm/io.h8
-rw-r--r--include/asm-arm/mach/irq.h12
-rw-r--r--include/asm-arm/memory.h39
-rw-r--r--include/asm-arm/pgtable-nommu.h1
-rw-r--r--include/asm-arm/pgtable.h3
-rw-r--r--include/asm-arm/processor.h1
-rw-r--r--include/asm-arm/procinfo.h21
-rw-r--r--include/asm-arm/thread_info.h14
-rw-r--r--include/asm-avr32/arch-at32ap/at91_pdc.h (renamed from include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h)6
-rw-r--r--include/linux/i2c-pxa.h31
290 files changed, 13137 insertions, 1982 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index cf24400213f8..89ef018cc4bc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -348,6 +348,13 @@ P: Ian Molton
M: spyro@f2s.com
S: Maintained
+ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
+P: Andrew Victor
+M: andrew@sanpeople.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://maxim.org.za/at91_26.html
+S: Maintained
+
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ce00c570459d..8c05d4321ae9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -223,6 +223,12 @@ config ARCH_IOP33X
help
Support for Intel's IOP33X (XScale) family of processors.
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ select PCI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
@@ -331,6 +337,8 @@ source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-iop33x/Kconfig"
+source "arch/arm/mach-iop13xx/Kconfig"
+
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
@@ -374,6 +382,14 @@ config PLAT_IOP
source arch/arm/mm/Kconfig
+config IWMMXT
+ bool "Enable iWMMXt support"
+ depends CPU_XSCALE || CPU_XSC3
+ default y if PXA27x
+ help
+ Enable support for iWMMXt context switching at run time if
+ running on a CPU that supports it.
+
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
bool
@@ -583,7 +599,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d22f38b957db..40c5eb1f55c7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -32,10 +32,6 @@ config DEBUG_USER
8 - SIGSEGV faults
16 - SIGBUS faults
-config DEBUG_WAITQ
- bool "Wait queue debugging"
- depends on DEBUG_KERNEL
-
config DEBUG_ERRORS
bool "Verbose kernel error messages"
depends on DEBUG_KERNEL
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f4f8bf36071..000f1100b553 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -15,6 +15,8 @@ CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
#CFLAGS +=-pipe
+# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
+CFLAGS +=$(call cc-option,-marm,)
# Do not use arch/arm/defconfig - it's always outdated.
# Select a platform tht is kept up-to-date
@@ -108,6 +110,7 @@ endif
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP32X) := iop32x
machine-$(CONFIG_ARCH_IOP33X) := iop33x
+ machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index f3e020f2227f..09b9d1b6844c 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -160,7 +160,7 @@ void __init gic_dist_init(void __iomem *base)
*/
for (i = 29; i < max_irq; i++) {
set_irq_chip(i, &gic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 80a72c75214f..cfe6f4650bc9 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -163,11 +163,11 @@ static struct locomo_dev_info locomo_devices[] = {
#define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT)
#define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR)
-static void locomo_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irqdesc *d;
- void __iomem *mapbase = get_irq_chipdata(irq);
+ struct irq_desc *d;
+ void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
desc->chip->ack(irq);
@@ -194,7 +194,7 @@ static void locomo_ack_irq(unsigned int irq)
static void locomo_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
@@ -203,7 +203,7 @@ static void locomo_mask_irq(unsigned int irq)
static void locomo_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r |= (0x0010 << (irq - LOCOMO_IRQ_START));
@@ -217,10 +217,10 @@ static struct irq_chip locomo_chip = {
.unmask = locomo_unmask_irq,
};
-static void locomo_key_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irqdesc *d;
- void __iomem *mapbase = get_irq_chipdata(irq);
+ struct irq_desc *d;
+ void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_KEY_START;
@@ -230,7 +230,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc)
static void locomo_key_ack_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
@@ -239,7 +239,7 @@ static void locomo_key_ack_irq(unsigned int irq)
static void locomo_key_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -248,7 +248,7 @@ static void locomo_key_mask_irq(unsigned int irq)
static void locomo_key_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -262,11 +262,11 @@ static struct irq_chip locomo_key_chip = {
.unmask = locomo_key_unmask_irq,
};
-static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irqdesc *d;
- void __iomem *mapbase = get_irq_chipdata(irq);
+ struct irq_desc *d;
+ void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
locomo_readl(mapbase + LOCOMO_GPD) &
@@ -285,7 +285,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc)
static void locomo_gpio_ack_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -302,7 +302,7 @@ static void locomo_gpio_ack_irq(unsigned int irq)
static void locomo_gpio_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -311,7 +311,7 @@ static void locomo_gpio_mask_irq(unsigned int irq)
static void locomo_gpio_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -325,10 +325,10 @@ static struct irq_chip locomo_gpio_chip = {
.unmask = locomo_gpio_unmask_irq,
};
-static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irqdesc *d;
- void __iomem *mapbase = get_irq_chipdata(irq);
+ struct irq_desc *d;
+ void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_LT_START;
@@ -338,7 +338,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc)
static void locomo_lt_ack_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
@@ -347,7 +347,7 @@ static void locomo_lt_ack_irq(unsigned int irq)
static void locomo_lt_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -356,7 +356,7 @@ static void locomo_lt_mask_irq(unsigned int irq)
static void locomo_lt_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -370,11 +370,11 @@ static struct irq_chip locomo_lt_chip = {
.unmask = locomo_lt_unmask_irq,
};
-static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irqdesc *d;
- void __iomem *mapbase = get_irq_chipdata(irq);
+ struct irq_desc *d;
+ void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
if (req) {
@@ -391,7 +391,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc)
static void locomo_spi_ack_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -408,7 +408,7 @@ static void locomo_spi_ack_irq(unsigned int irq)
static void locomo_spi_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -417,7 +417,7 @@ static void locomo_spi_mask_irq(unsigned int irq)
static void locomo_spi_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -440,55 +440,55 @@ static void locomo_setup_irq(struct locomo *lchip)
* Install handler for IRQ_LOCOMO_HW.
*/
set_irq_type(lchip->irq, IRQT_FALLING);
- set_irq_chipdata(lchip->irq, irqbase);
+ set_irq_chip_data(lchip->irq, irqbase);
set_irq_chained_handler(lchip->irq, locomo_handler);
/* Install handlers for IRQ_LOCOMO_*_BASE */
set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
- set_irq_chipdata(IRQ_LOCOMO_KEY_BASE, irqbase);
+ set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
- set_irq_chipdata(IRQ_LOCOMO_GPIO_BASE, irqbase);
+ set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
- set_irq_chipdata(IRQ_LOCOMO_LT_BASE, irqbase);
+ set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
- set_irq_chipdata(IRQ_LOCOMO_SPI_BASE, irqbase);
+ set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
- set_irq_chipdata(LOCOMO_IRQ_KEY_START, irqbase);
- set_irq_handler(LOCOMO_IRQ_KEY_START, do_edge_IRQ);
+ set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
+ set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
set_irq_chip(irq, &locomo_gpio_chip);
- set_irq_chipdata(irq, irqbase);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_chip_data(irq, irqbase);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
- set_irq_chipdata(LOCOMO_IRQ_LT_START, irqbase);
- set_irq_handler(LOCOMO_IRQ_LT_START, do_edge_IRQ);
+ set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
+ set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
set_irq_chip(irq, &locomo_spi_chip);
- set_irq_chipdata(irq, irqbase);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_chip_data(irq, irqbase);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index d5f72010a6f3..fe3f05901a23 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -147,7 +147,7 @@ void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *ho
* will call us again if there are more interrupts to process.
*/
static void
-sa1111_irq_handler(unsigned int irq, struct irqdesc *desc)
+sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int stat0, stat1, i;
void __iomem *base = get_irq_data(irq);
@@ -187,7 +187,7 @@ static void sa1111_ack_irq(unsigned int irq)
static void sa1111_mask_lowirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ie0;
ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -197,7 +197,7 @@ static void sa1111_mask_lowirq(unsigned int irq)
static void sa1111_unmask_lowirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ie0;
ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -215,7 +215,7 @@ static void sa1111_unmask_lowirq(unsigned int irq)
static int sa1111_retrigger_lowirq(unsigned int irq)
{
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip0;
int i;
@@ -236,7 +236,7 @@ static int sa1111_retrigger_lowirq(unsigned int irq)
static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
{
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip0;
if (flags == IRQT_PROBE)
@@ -259,7 +259,7 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
{
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long we0;
we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -284,7 +284,7 @@ static struct irq_chip sa1111_low_chip = {
static void sa1111_mask_highirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ie1;
ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -294,7 +294,7 @@ static void sa1111_mask_highirq(unsigned int irq)
static void sa1111_unmask_highirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ie1;
ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -312,7 +312,7 @@ static void sa1111_unmask_highirq(unsigned int irq)
static int sa1111_retrigger_highirq(unsigned int irq)
{
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip1;
int i;
@@ -333,7 +333,7 @@ static int sa1111_retrigger_highirq(unsigned int irq)
static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
{
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip1;
if (flags == IRQT_PROBE)
@@ -356,7 +356,7 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
{
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long we1;
we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -410,15 +410,15 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
set_irq_chip(irq, &sa1111_low_chip);
- set_irq_chipdata(irq, irqbase);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_chip_data(irq, irqbase);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
set_irq_chip(irq, &sa1111_high_chip);
- set_irq_chipdata(irq, irqbase);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_chip_data(irq, irqbase);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 43d278134521..c026fa2214a3 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -27,14 +27,14 @@
static void vic_mask_irq(unsigned int irq)
{
- void __iomem *base = get_irq_chipdata(irq);
+ void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
- void __iomem *base = get_irq_chipdata(irq);
+ void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
@@ -88,10 +88,10 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
- set_irq_chipdata(irq, base);
+ set_irq_chip_data(irq, base);
if (vic_sources & (1 << i)) {
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index b43041476e02..e10d003566d6 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -357,9 +357,9 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x10000000
-CONFIG_MTD_PHYSMAP_LEN=0x200000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_PLATRAM is not set
@@ -585,7 +585,9 @@ CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-CONFIG_AT91_RTC=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -979,7 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index d96fc8386e2f..834dddb51314 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -348,9 +348,9 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x10000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_PLATRAM is not set
@@ -566,7 +566,9 @@ CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-CONFIG_AT91_RTC=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -968,7 +970,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
new file mode 100644
index 000000000000..79049206dfa5
--- /dev/null
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -0,0 +1,950 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc6
+# Fri Nov 17 18:42:21 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+
+#
+# AT91SAM9260 Board Type
+#
+CONFIG_MACH_AT91SAM9260EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
new file mode 100644
index 000000000000..784ad7c0186d
--- /dev/null
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -0,0 +1,1106 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc6
+# Fri Nov 17 18:00:38 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+CONFIG_ARCH_AT91SAM9261=y
+
+#
+# AT91SAM9261 Board Type
+#
+CONFIG_MACH_AT91SAM9261EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index cfe6bd8e81cd..821865f75605 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1216,7 +1216,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index d24ae8777c35..d392833b31fb 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -474,7 +474,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index 09b7acd7f647..ee130b528bd4 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -851,7 +851,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index a3758913c0bb..970c8c772eb7 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -934,7 +934,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index c41c04fa5020..e8980a9bb893 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1513,7 +1513,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 20e68250d835..2cadd51506bb 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1113,7 +1113,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index df8595ac031f..94908c1df4cf 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -1062,7 +1062,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3b4802a849e4..f8a66b72ad5d 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -125,6 +125,7 @@ CONFIG_CRUNCH=y
#
# EP93xx Platforms
#
+CONFIG_MACH_ADSSPHERE=y
CONFIG_MACH_EDB9302=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
@@ -1134,7 +1135,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index 9d62ed16bf57..0e739af52713 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -702,7 +702,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index a45b57582b86..1c8fb89a6730 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -740,7 +740,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 692ab57ba1ca..3ce96e60b409 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -835,7 +835,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
new file mode 100644
index 000000000000..f6e46193fd26
--- /dev/null
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -0,0 +1,1134 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19
+# Fri Dec 1 10:51:01 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+CONFIG_ARCH_IOP13XX=y
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# IOP13XX Implementation Options
+#
+
+#
+# IOP13XX Platform Support
+#
+CONFIG_MACH_IQ81340SC=y
+CONFIG_MACH_IQ81340MC=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfa000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+# CONFIG_MD_LINEAR is not set
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MD_RAID5_RESHAPE is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 0d67f66e78c2..b275c53728ec 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1204,7 +1204,6 @@ CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 2a8fc153969d..848e3ace9069 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1051,7 +1051,6 @@ CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 27b3e31a8ad8..bbd2dcf91e52 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1026,7 +1026,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 7b18997083ce..06deefaec1d2 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1305,7 +1305,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index fac7c3b240c0..fabf74c51a88 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1243,7 +1243,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 80a6fd97eb32..0c556289a3f4 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -889,7 +889,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index b4cd4b414836..c16537d9d67a 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -753,7 +753,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 4b29e099640d..e146189ab54f 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -949,7 +949,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index bf9cf9c6d2df..f8ac29d5c654 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -850,7 +850,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 3a57be32e849..46a0f7fe1fa5 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1100,7 +1100,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 81daadcbe0ba..e544bfbbde5d 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -772,7 +772,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index b112bd75bda2..cc8c95b99292 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -766,7 +766,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
index d16f6cd6e039..577d7e1b5d42 100644
--- a/arch/arm/configs/mx1ads_defconfig
+++ b/arch/arm/configs/mx1ads_defconfig
@@ -691,7 +691,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index df8168e57b7c..e86794a10fc0 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1115,7 +1115,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 2cae1ead9f9b..c1a63a35c58d 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -994,7 +994,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 61115a773382..57f32f39d0ff 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -872,7 +872,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 9b9f2155af35..0498ebd7d5de 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1045,7 +1045,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index 24e8bdd4cb91..a6b47ea8e465 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -721,7 +721,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index a4989f44baaa..b5e11aa2e290 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1604,7 +1604,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index b71d31a4bb56..46e5089df0ae 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -768,7 +768,6 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index ffd905ff19f1..fc39ba1a89f3 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -967,7 +967,6 @@ CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 3f1ec4e304f7..accbf529ce5b 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -759,7 +759,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index b498afdc03b6..bc091264d354 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -910,7 +910,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index c0152393e494..3b31a33d0080 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1319,7 +1319,6 @@ CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index c48d17062262..9b6561d119af 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -965,7 +965,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 140056a3507f..03f783e696b3 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -934,7 +934,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index bd03238968c1..aa7a01179500 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1406,7 +1406,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index f7bf6ef27d19..48dca69addae 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -972,7 +972,6 @@ CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1320a0efca73..ab06a86e85d5 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -24,7 +24,9 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
-obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o
+obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
+obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
+obj-$(CONFIG_IWMMXT) += iwmmxt.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index ecf4f9472d94..a11fb9a40c04 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -12,7 +12,6 @@
*/
#include <linux/module.h>
#include <linux/poll.h>
-#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
@@ -26,6 +25,7 @@
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/kthread.h>
+#include <linux/delay.h>
#include <asm/apm.h> /* apm_power_info */
#include <asm/system.h>
@@ -71,7 +71,8 @@ struct apm_user {
#define SUSPEND_PENDING 1 /* suspend pending read */
#define SUSPEND_READ 2 /* suspend read, pending ack */
#define SUSPEND_ACKED 3 /* suspend acked */
-#define SUSPEND_DONE 4 /* suspend completed */
+#define SUSPEND_WAIT 4 /* waiting for suspend */
+#define SUSPEND_DONE 5 /* suspend completed */
struct apm_queue queue;
};
@@ -101,6 +102,7 @@ static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
static DEFINE_SPINLOCK(kapmd_queue_lock);
static struct apm_queue kapmd_queue;
+static DEFINE_MUTEX(state_lock);
static const char driver_version[] = "1.13"; /* no spaces */
@@ -148,38 +150,60 @@ static void queue_add_event(struct apm_queue *q, apm_event_t event)
q->events[q->event_head] = event;
}
-static void queue_event_one_user(struct apm_user *as, apm_event_t event)
+static void queue_event(apm_event_t event)
{
- if (as->suser && as->writer) {
- switch (event) {
- case APM_SYS_SUSPEND:
- case APM_USER_SUSPEND:
- /*
- * If this user already has a suspend pending,
- * don't queue another one.
- */
- if (as->suspend_state != SUSPEND_NONE)
- return;
+ struct apm_user *as;
- as->suspend_state = SUSPEND_PENDING;
- suspends_pending++;
- break;
- }
+ down_read(&user_list_lock);
+ list_for_each_entry(as, &apm_user_list, list) {
+ if (as->reader)
+ queue_add_event(&as->queue, event);
}
- queue_add_event(&as->queue, event);
+ up_read(&user_list_lock);
+ wake_up_interruptible(&apm_waitqueue);
}
-static void queue_event(apm_event_t event, struct apm_user *sender)
+/*
+ * queue_suspend_event - queue an APM suspend event.
+ *
+ * Check that we're in a state where we can suspend. If not,
+ * return -EBUSY. Otherwise, queue an event to all "writer"
+ * users. If there are no "writer" users, return '1' to
+ * indicate that we can immediately suspend.
+ */
+static int queue_suspend_event(apm_event_t event, struct apm_user *sender)
{
struct apm_user *as;
+ int ret = 1;
+ mutex_lock(&state_lock);
down_read(&user_list_lock);
+
+ /*
+ * If a thread is still processing, we can't suspend, so reject
+ * the request.
+ */
list_for_each_entry(as, &apm_user_list, list) {
- if (as != sender && as->reader)
- queue_event_one_user(as, event);
+ if (as != sender && as->reader && as->writer && as->suser &&
+ as->suspend_state != SUSPEND_NONE) {
+ ret = -EBUSY;
+ goto out;
+ }
}
+
+ list_for_each_entry(as, &apm_user_list, list) {
+ if (as != sender && as->reader && as->writer && as->suser) {
+ as->suspend_state = SUSPEND_PENDING;
+ suspends_pending++;
+ queue_add_event(&as->queue, event);
+ ret = 0;
+ }
+ }
+ out:
up_read(&user_list_lock);
+ mutex_unlock(&state_lock);
wake_up_interruptible(&apm_waitqueue);
+ return ret;
}
static void apm_suspend(void)
@@ -191,17 +215,22 @@ static void apm_suspend(void)
* Anyone on the APM queues will think we're still suspended.
* Send a message so everyone knows we're now awake again.
*/
- queue_event(APM_NORMAL_RESUME, NULL);
+ queue_event(APM_NORMAL_RESUME);
/*
* Finally, wake up anyone who is sleeping on the suspend.
*/
+ mutex_lock(&state_lock);
down_read(&user_list_lock);
list_for_each_entry(as, &apm_user_list, list) {
- as->suspend_result = err;
- as->suspend_state = SUSPEND_DONE;
+ if (as->suspend_state == SUSPEND_WAIT ||
+ as->suspend_state == SUSPEND_ACKED) {
+ as->suspend_result = err;
+ as->suspend_state = SUSPEND_DONE;
+ }
}
up_read(&user_list_lock);
+ mutex_unlock(&state_lock);
wake_up(&apm_suspend_waitqueue);
}
@@ -227,8 +256,11 @@ static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t
if (copy_to_user(buf, &event, sizeof(event)))
break;
- if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
+ mutex_lock(&state_lock);
+ if (as->suspend_state == SUSPEND_PENDING &&
+ (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND))
as->suspend_state = SUSPEND_READ;
+ mutex_unlock(&state_lock);
buf += sizeof(event);
i -= sizeof(event);
@@ -270,9 +302,13 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
switch (cmd) {
case APM_IOC_SUSPEND:
+ mutex_lock(&state_lock);
+
as->suspend_result = -EINTR;
if (as->suspend_state == SUSPEND_READ) {
+ int pending;
+
/*
* If we read a suspend command from /dev/apm_bios,
* then the corresponding APM_IOC_SUSPEND ioctl is
@@ -280,47 +316,73 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
*/
as->suspend_state = SUSPEND_ACKED;
suspends_pending--;
+ pending = suspends_pending == 0;
+ mutex_unlock(&state_lock);
+
+ /*
+ * If there are no further acknowledges required,
+ * suspend the system.
+ */
+ if (pending)
+ apm_suspend();
+
+ /*
+ * Wait for the suspend/resume to complete. If there
+ * are pending acknowledges, we wait here for them.
+ *
+ * Note: we need to ensure that the PM subsystem does
+ * not kick us out of the wait when it suspends the
+ * threads.
+ */
+ flags = current->flags;
+ current->flags |= PF_NOFREEZE;
+
+ wait_event(apm_suspend_waitqueue,
+ as->suspend_state == SUSPEND_DONE);
} else {
+ as->suspend_state = SUSPEND_WAIT;
+ mutex_unlock(&state_lock);
+
/*
* Otherwise it is a request to suspend the system.
* Queue an event for all readers, and expect an
* acknowledge from all writers who haven't already
* acknowledged.
*/
- queue_event(APM_USER_SUSPEND, as);
- }
-
- /*
- * If there are no further acknowledges required, suspend
- * the system.
- */
- if (suspends_pending == 0)
- apm_suspend();
+ err = queue_suspend_event(APM_USER_SUSPEND, as);
+ if (err < 0) {
+ /*
+ * Avoid taking the lock here - this
+ * should be fine.
+ */
+ as->suspend_state = SUSPEND_NONE;
+ break;
+ }
+
+ if (err > 0)
+ apm_suspend();
- /*
- * Wait for the suspend/resume to complete. If there are
- * pending acknowledges, we wait here for them.
- *
- * Note that we need to ensure that the PM subsystem does
- * not kick us out of the wait when it suspends the threads.
- */
- flags = current->flags;
- current->flags |= PF_NOFREEZE;
+ /*
+ * Wait for the suspend/resume to complete. If there
+ * are pending acknowledges, we wait here for them.
+ *
+ * Note: we need to ensure that the PM subsystem does
+ * not kick us out of the wait when it suspends the
+ * threads.
+ */
+ flags = current->flags;
+ current->flags |= PF_NOFREEZE;
- /*
- * Note: do not allow a thread which is acking the suspend
- * to escape until the resume is complete.
- */
- if (as->suspend_state == SUSPEND_ACKED)
- wait_event(apm_suspend_waitqueue,
- as->suspend_state == SUSPEND_DONE);
- else
wait_event_interruptible(apm_suspend_waitqueue,
as->suspend_state == SUSPEND_DONE);
+ }
current->flags = flags;
+
+ mutex_lock(&state_lock);
err = as->suspend_result;
as->suspend_state = SUSPEND_NONE;
+ mutex_unlock(&state_lock);
break;
}
@@ -330,6 +392,8 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
static int apm_release(struct inode * inode, struct file * filp)
{
struct apm_user *as = filp->private_data;
+ int pending = 0;
+
filp->private_data = NULL;
down_write(&user_list_lock);
@@ -342,11 +406,14 @@ static int apm_release(struct inode * inode, struct file * filp)
* need to balance suspends_pending, which means the
* possibility of sleeping.
*/
+ mutex_lock(&state_lock);
if (as->suspend_state != SUSPEND_NONE) {
suspends_pending -= 1;
- if (suspends_pending == 0)
- apm_suspend();
+ pending = suspends_pending == 0;
}
+ mutex_unlock(&state_lock);
+ if (pending)
+ apm_suspend();
kfree(as);
return 0;
@@ -470,6 +537,7 @@ static int kapmd(void *arg)
{
do {
apm_event_t event;
+ int ret;
wait_event_interruptible(kapmd_wait,
!queue_empty(&kapmd_queue) || kthread_should_stop());
@@ -489,13 +557,20 @@ static int kapmd(void *arg)
case APM_LOW_BATTERY:
case APM_POWER_STATUS_CHANGE:
- queue_event(event, NULL);
+ queue_event(event);
break;
case APM_USER_SUSPEND:
case APM_SYS_SUSPEND:
- queue_event(event, NULL);
- if (suspends_pending == 0)
+ ret = queue_suspend_event(event, NULL);
+ if (ret < 0) {
+ /*
+ * We were busy. Try again in 50ms.
+ */
+ queue_add_event(&kapmd_queue, event);
+ msleep(50);
+ }
+ if (ret > 0)
apm_suspend();
break;
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index cc2d58d028e1..3c078e346753 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -15,6 +15,7 @@
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/procinfo.h>
/*
* Make sure that the compiler and target are compatible.
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index b27513a0f11e..a786f769035d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -529,7 +529,7 @@ static void ecard_dump_irq_state(void)
}
}
-static void ecard_check_lockup(struct irqdesc *desc)
+static void ecard_check_lockup(struct irq_desc *desc)
{
static unsigned long last;
static int lockup;
@@ -567,7 +567,7 @@ static void ecard_check_lockup(struct irqdesc *desc)
}
static void
-ecard_irq_handler(unsigned int irq, struct irqdesc *desc)
+ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
{
ecard_t *ec;
int called = 0;
@@ -585,7 +585,7 @@ ecard_irq_handler(unsigned int irq, struct irqdesc *desc)
pending = ecard_default_ops.irqpending(ec);
if (pending) {
- struct irqdesc *d = irq_desc + ec->irq;
+ struct irq_desc *d = irq_desc + ec->irq;
desc_handle_irq(ec->irq, d);
called ++;
}
@@ -609,7 +609,7 @@ static unsigned char first_set[] =
};
static void
-ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc)
+ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
{
const unsigned int statusmask = 15;
unsigned int status;
@@ -1022,7 +1022,7 @@ ecard_probe(int slot, card_type_t type)
if (slot < 8) {
ec->irq = 32 + slot;
set_irq_chip(ec->irq, &ecard_chip);
- set_irq_handler(ec->irq, do_level_IRQ);
+ set_irq_handler(ec->irq, handle_level_irq);
set_irq_flags(ec->irq, IRQF_VALID);
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index bd623b73445f..2db42b18f53f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -589,10 +589,6 @@ ENTRY(__switch_to)
strex r5, r4, [ip] @ Clear exclusive monitor
#endif
#endif
-#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
- mra r4, r5, acc0
- stmia ip, {r4, r5}
-#endif
#if defined(CONFIG_HAS_TLS_REG)
mcr p15, 0, r3, c13, c0, 3 @ set TLS register
#elif !defined(CONFIG_TLS_REG_EMUL)
@@ -602,11 +598,6 @@ ENTRY(__switch_to)
#ifdef CONFIG_MMU
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
-#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
- add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra
- ldmib r4, {r4, r5}
- mar acc0, r4, r5
-#endif
mov r5, r0
add r4, r2, #TI_CPU_SAVE
ldr r0, =thread_notify_head
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index f359a189dcf2..0119c0d5f978 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -16,7 +16,6 @@
#include <asm/assembler.h>
#include <asm/mach-types.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index ebc3e74a7947..bda0748ffb00 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -16,7 +16,6 @@
#include <asm/assembler.h>
#include <asm/domain.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/memory.h>
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 2c4ff1cbe334..ec01f08f5642 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -112,7 +112,7 @@ static struct irq_desc bad_irq_desc = {
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
- struct irqdesc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
/*
* Some hardware gives randomly wrong interrupts. Rather
@@ -134,7 +134,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
- struct irqdesc *desc;
+ struct irq_desc *desc;
unsigned long flags;
if (irq >= NR_IRQS) {
@@ -171,7 +171,7 @@ void __init init_IRQ(void)
#ifdef CONFIG_HOTPLUG_CPU
-static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
{
pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
@@ -190,7 +190,7 @@ void migrate_irqs(void)
unsigned int i, cpu = smp_processor_id();
for (i = 0; i < NR_IRQS; i++) {
- struct irqdesc *desc = irq_desc + i;
+ struct irq_desc *desc = irq_desc + i;
if (desc->cpu == cpu) {
unsigned int newcpu = any_online_cpu(desc->affinity);
diff --git a/arch/arm/kernel/iwmmxt-notifier.c b/arch/arm/kernel/iwmmxt-notifier.c
deleted file mode 100644
index 0d1a1db40062..000000000000
--- a/arch/arm/kernel/iwmmxt-notifier.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/kernel/iwmmxt-notifier.c
- *
- * XScale iWMMXt (Concan) context switching and handling
- *
- * Initial code:
- * Copyright (c) 2003, Intel Corporation
- *
- * Full lazy switching support, optimizations and more, by Nicolas Pitre
- * Copyright (c) 2003-2004, MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/thread_notify.h>
-#include <asm/io.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
- struct thread_info *thread = t;
-
- switch (cmd) {
- case THREAD_NOTIFY_FLUSH:
- /*
- * flush_thread() zeroes thread->fpstate, so no need
- * to do anything here.
- *
- * FALLTHROUGH: Ensure we don't try to overwrite our newly
- * initialised state information on the first fault.
- */
-
- case THREAD_NOTIFY_RELEASE:
- iwmmxt_task_release(thread);
- break;
-
- case THREAD_NOTIFY_SWITCH:
- iwmmxt_task_switch(thread);
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block iwmmxt_notifier_block = {
- .notifier_call = iwmmxt_do,
-};
-
-static int __init iwmmxt_init(void)
-{
- thread_register_notifier(&iwmmxt_notifier_block);
-
- return 0;
-}
-
-late_initcall(iwmmxt_init);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index bf35c178a877..a9e8f7e55fd6 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -281,67 +281,6 @@ void show_fpregs(struct user_fp *regs)
}
/*
- * Task structure and kernel stack allocation.
- */
-struct thread_info_list {
- unsigned long *head;
- unsigned int nr;
-};
-
-static DEFINE_PER_CPU(struct thread_info_list, thread_info_list) = { NULL, 0 };
-
-#define EXTRA_TASK_STRUCT 4
-
-struct thread_info *alloc_thread_info(struct task_struct *task)
-{
- struct thread_info *thread = NULL;
-
- if (EXTRA_TASK_STRUCT) {
- struct thread_info_list *th = &get_cpu_var(thread_info_list);
- unsigned long *p = th->head;
-
- if (p) {
- th->head = (unsigned long *)p[0];
- th->nr -= 1;
- }
- put_cpu_var(thread_info_list);
-
- thread = (struct thread_info *)p;
- }
-
- if (!thread)
- thread = (struct thread_info *)
- __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
- /*
- * The stack must be cleared if you want SYSRQ-T to
- * give sensible stack usage information
- */
- if (thread)
- memzero(thread, THREAD_SIZE);
-#endif
- return thread;
-}
-
-void free_thread_info(struct thread_info *thread)
-{
- if (EXTRA_TASK_STRUCT) {
- struct thread_info_list *th = &get_cpu_var(thread_info_list);
- if (th->nr < EXTRA_TASK_STRUCT) {
- unsigned long *p = (unsigned long *)thread;
- p[0] = (unsigned long)th->head;
- th->head = p;
- th->nr += 1;
- put_cpu_var(thread_info_list);
- return;
- }
- put_cpu_var(thread_info_list);
- }
- free_pages((unsigned long)thread, THREAD_SIZE_ORDER);
-}
-
-/*
* Free current thread data structures etc..
*/
void exit_thread(void)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 29efc9f82057..238dd9b6db84 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -357,9 +357,6 @@ static void __init setup_processor(void)
#ifndef CONFIG_VFP
elf_hwcap &= ~HWCAP_VFP;
#endif
-#ifndef CONFIG_IWMMXT
- elf_hwcap &= ~HWCAP_IWMMXT;
-#endif
cpu_proc_init();
}
@@ -441,16 +438,19 @@ __early_param("initrd=", early_initrd);
static void __init arm_add_memory(unsigned long start, unsigned long size)
{
+ struct membank *bank;
+
/*
* Ensure that start/size are aligned to a page boundary.
* Size is appropriately rounded down, start is rounded up.
*/
size -= start & ~PAGE_MASK;
- meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start);
- meminfo.bank[meminfo.nr_banks].size = size & PAGE_MASK;
- meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start);
- meminfo.nr_banks += 1;
+ bank = &meminfo.bank[meminfo.nr_banks++];
+
+ bank->start = PAGE_ALIGN(start);
+ bank->size = size & PAGE_MASK;
+ bank->node = PHYS_TO_NID(start);
}
/*
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f38a60a03b8c..3843d3bab2dd 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -13,6 +13,7 @@
#include <linux/personality.h>
#include <linux/freezer.h>
+#include <asm/elf.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index bede380c07a9..042a12982e98 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -631,12 +631,9 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
notify_die("unknown data abort code", regs, &info, instr, 0);
}
-void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line)
{
- printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
- if (data)
- printk(" - extra data = %p", data);
- printk("\n");
+ printk(KERN_CRIT"kernel BUG at %s:%d!\n", file, line);
*(int *)0 = 0;
/* Avoid "noreturn function does return" */
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
new file mode 100644
index 000000000000..180000bfdc8f
--- /dev/null
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/kernel/xscale-cp0.c
+ *
+ * XScale DSP and iWMMXt coprocessor context switching and handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static inline void dsp_save_state(u32 *state)
+{
+ __asm__ __volatile__ (
+ "mrrc p0, 0, %0, %1, c0\n"
+ : "=r" (state[0]), "=r" (state[1]));
+}
+
+static inline void dsp_load_state(u32 *state)
+{
+ __asm__ __volatile__ (
+ "mcrr p0, 0, %0, %1, c0\n"
+ : : "r" (state[0]), "r" (state[1]));
+}
+
+static int dsp_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ thread->cpu_context.extra[0] = 0;
+ thread->cpu_context.extra[1] = 0;
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ dsp_save_state(current_thread_info()->cpu_context.extra);
+ dsp_load_state(thread->cpu_context.extra);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block dsp_notifier_block = {
+ .notifier_call = dsp_do,
+};
+
+
+#ifdef CONFIG_IWMMXT
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_RELEASE:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+#endif
+
+
+static u32 __init xscale_cp_access_read(void)
+{
+ u32 value;
+
+ __asm__ __volatile__ (
+ "mrc p15, 0, %0, c15, c1, 0\n\t"
+ : "=r" (value));
+
+ return value;
+}
+
+static void __init xscale_cp_access_write(u32 value)
+{
+ u32 temp;
+
+ __asm__ __volatile__ (
+ "mcr p15, 0, %1, c15, c1, 0\n\t"
+ "mrc p15, 0, %0, c15, c1, 0\n\t"
+ "mov %0, %0\n\t"
+ "sub pc, pc, #4\n\t"
+ : "=r" (temp) : "r" (value));
+}
+
+/*
+ * Detect whether we have a MAC coprocessor (40 bit register) or an
+ * iWMMXt coprocessor (64 bit registers) by loading 00000100:00000000
+ * into a coprocessor register and reading it back, and checking
+ * whether the upper word survived intact.
+ */
+static int __init cpu_has_iwmmxt(void)
+{
+ u32 lo;
+ u32 hi;
+
+ /*
+ * This sequence is interpreted by the DSP coprocessor as:
+ * mar acc0, %2, %3
+ * mra %0, %1, acc0
+ *
+ * And by the iWMMXt coprocessor as:
+ * tmcrr wR0, %2, %3
+ * tmrrc %0, %1, wR0
+ */
+ __asm__ __volatile__ (
+ "mcrr p0, 0, %2, %3, c0\n"
+ "mrrc p0, 0, %0, %1, c0\n"
+ : "=r" (lo), "=r" (hi)
+ : "r" (0), "r" (0x100));
+
+ return !!hi;
+}
+
+
+/*
+ * If we detect that the CPU has iWMMXt (and CONFIG_IWMMXT=y), we
+ * disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
+ * switch code handle iWMMXt context switching. If on the other
+ * hand the CPU has a DSP coprocessor, we keep access to CP0 enabled
+ * all the time, and save/restore acc0 on context switch in non-lazy
+ * fashion.
+ */
+static int __init xscale_cp0_init(void)
+{
+ u32 cp_access;
+
+ cp_access = xscale_cp_access_read() & ~3;
+ xscale_cp_access_write(cp_access | 1);
+
+ if (cpu_has_iwmmxt()) {
+#ifndef CONFIG_IWMMXT
+ printk(KERN_WARNING "CAUTION: XScale iWMMXt coprocessor "
+ "detected, but kernel support is missing.\n");
+#else
+ printk(KERN_INFO "XScale iWMMXt coprocessor detected.\n");
+ elf_hwcap |= HWCAP_IWMMXT;
+ thread_register_notifier(&iwmmxt_notifier_block);
+#endif
+ } else {
+ printk(KERN_INFO "XScale DSP coprocessor detected.\n");
+ thread_register_notifier(&dsp_notifier_block);
+ cp_access |= 1;
+ }
+
+ xscale_cp_access_write(cp_access);
+
+ return 0;
+}
+
+late_initcall(xscale_cp0_init);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index fe3d297d682d..a950160fcfb6 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -82,7 +82,7 @@ static void aaec2000_int_unmask(unsigned int irq)
IRQ_INTENS |= (1 << irq);
}
-static struct irqchip aaec2000_irq_chip = {
+static struct irq_chip aaec2000_irq_chip = {
.ack = aaec2000_int_ack,
.mask = aaec2000_int_mask,
.unmask = aaec2000_int_unmask,
@@ -93,7 +93,7 @@ void __init aaec2000_init_irq(void)
unsigned int i;
for (i = 0; i < NR_IRQS; i++) {
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_chip(i, &aaec2000_irq_chip);
set_irq_flags(i, IRQF_VALID);
}
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 2f85e8693b1b..9f11db8af233 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -2,7 +2,8 @@ if ARCH_AT91
menu "Atmel AT91 System-on-Chip"
-comment "Atmel AT91 Processors"
+choice
+ prompt "Atmel AT91 Processor"
config ARCH_AT91RM9200
bool "AT91RM9200"
@@ -13,6 +14,8 @@ config ARCH_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
+endchoice
+
# ----------------------------------------------------------
if ARCH_AT91RM9200
@@ -33,7 +36,6 @@ config ARCH_AT91RM9200DK
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
-
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
@@ -90,6 +92,13 @@ if ARCH_AT91SAM9260
comment "AT91SAM9260 Board Type"
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
endif
# ----------------------------------------------------------
@@ -98,8 +107,31 @@ if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9261
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
endif
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+ help
+ Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
# ----------------------------------------------------------
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index c174805c24e5..cf777007847a 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o gpio.o devices.o
+obj-y := clock.o irq.o gpio.o
obj-m :=
obj-n :=
obj- :=
@@ -10,11 +10,11 @@ obj- :=
obj-$(CONFIG_PM) += pm.o
# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
-obj-$(CONFIG_ARCH_AT91SAM9260) +=
-obj-$(CONFIG_ARCH_AT91SAM9261) +=
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-# AT91RM9200 Board-specific support
+# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
@@ -26,8 +26,10 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
# AT91SAM9260 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
# AT91SAM9261 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index dcf6136fedf9..a92e9a495b07 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -14,8 +14,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_st.h>
-#include <asm/hardware.h>
#include "generic.h"
#include "clock.h"
@@ -26,32 +28,12 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = AT91_VA_BASE_SPI,
- .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
.virtual = AT91_VA_BASE_EMAC,
.pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = AT91_VA_BASE_TWI,
- .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_MCI,
- .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_UDP,
- .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_SRAM_VIRT_BASE,
+ .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
.pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
.length = AT91RM9200_SRAM_SIZE,
.type = MT_DEVICE,
@@ -222,6 +204,16 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
}
};
+static void at91rm9200_reset(void)
+{
+ /*
+ * Perform a hardware reset with the use of the Watchdog timer.
+ */
+ at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+ at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+}
+
+
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
@@ -230,6 +222,12 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
/* Map peripherals */
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+ at91_arch_reset = at91rm9200_reset;
+ at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
+ | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
+ | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
+ | (1 << AT91RM9200_ID_IRQ6);
+
/* Init clock subsystem */
at91_clock_init(main_clock);
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
index 059824376629..4641b99db0ee 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/devices.c
+ * arch/arm/mach-at91rm9200/at91rm9200_devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
@@ -15,9 +15,10 @@
#include <linux/platform_device.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91rm9200_mc.h>
#include "generic.h"
@@ -33,7 +34,7 @@
static u64 ohci_dmamask = 0xffffffffUL;
static struct at91_usbh_data usbh_data;
-static struct resource at91_usbh_resources[] = {
+static struct resource usbh_resources[] = {
[0] = {
.start = AT91RM9200_UHP_BASE,
.end = AT91RM9200_UHP_BASE + SZ_1M - 1,
@@ -54,8 +55,8 @@ static struct platform_device at91rm9200_usbh_device = {
.coherent_dma_mask = 0xffffffff,
.platform_data = &usbh_data,
},
- .resource = at91_usbh_resources,
- .num_resources = ARRAY_SIZE(at91_usbh_resources),
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
};
void __init at91_add_device_usbh(struct at91_usbh_data *data)
@@ -78,7 +79,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
#ifdef CONFIG_USB_GADGET_AT91
static struct at91_udc_data udc_data;
-static struct resource at91_udc_resources[] = {
+static struct resource udc_resources[] = {
[0] = {
.start = AT91RM9200_BASE_UDP,
.end = AT91RM9200_BASE_UDP + SZ_16K - 1,
@@ -97,8 +98,8 @@ static struct platform_device at91rm9200_udc_device = {
.dev = {
.platform_data = &udc_data,
},
- .resource = at91_udc_resources,
- .num_resources = ARRAY_SIZE(at91_udc_resources),
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
};
void __init at91_add_device_udc(struct at91_udc_data *data)
@@ -129,7 +130,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
static u64 eth_dmamask = 0xffffffffUL;
static struct at91_eth_data eth_data;
-static struct resource at91_eth_resources[] = {
+static struct resource eth_resources[] = {
[0] = {
.start = AT91_VA_BASE_EMAC,
.end = AT91_VA_BASE_EMAC + SZ_16K - 1,
@@ -150,8 +151,8 @@ static struct platform_device at91rm9200_eth_device = {
.coherent_dma_mask = 0xffffffff,
.platform_data = &eth_data,
},
- .resource = at91_eth_resources,
- .num_resources = ARRAY_SIZE(at91_eth_resources),
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
@@ -202,11 +203,13 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf_data;
-static struct resource at91_cf_resources[] = {
+#define CF_BASE AT91_CHIPSELECT_4
+
+static struct resource cf_resources[] = {
[0] = {
- .start = AT91_CF_BASE,
+ .start = CF_BASE,
/* ties up CS4, CS5 and CS6 */
- .end = AT91_CF_BASE + (0x30000000 - 1),
+ .end = CF_BASE + (0x30000000 - 1),
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
},
};
@@ -217,15 +220,38 @@ static struct platform_device at91rm9200_cf_device = {
.dev = {
.platform_data = &cf_data,
},
- .resource = at91_cf_resources,
- .num_resources = ARRAY_SIZE(at91_cf_resources),
+ .resource = cf_resources,
+ .num_resources = ARRAY_SIZE(cf_resources),
};
void __init at91_add_device_cf(struct at91_cf_data *data)
{
+ unsigned int csa;
+
if (!data)
return;
+ data->chipselect = 4; /* can only use EBI ChipSelect 4 */
+
+ /* CF takes over CS4, CS5, CS6 */
+ csa = at91_sys_read(AT91_EBI_CSA);
+ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+
+ /*
+ * Static memory controller timing adjustments.
+ * REVISIT: these timings are in terms of MCK cycles, so
+ * when MCK changes (cpufreq etc) so must these values...
+ */
+ at91_sys_write(AT91_SMC_CSR(4),
+ AT91_SMC_ACSS_STD
+ | AT91_SMC_DBW_16
+ | AT91_SMC_BAT
+ | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(32) /* wait states */
+ | AT91_SMC_RWSETUP_(6) /* setup time */
+ | AT91_SMC_RWHOLD_(4) /* hold time */
+ );
+
/* input/irq */
if (data->irq_pin) {
at91_set_gpio_input(data->irq_pin, 1);
@@ -245,6 +271,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
+ /* nWAIT is _not_ a default setting */
+ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
+
cf_data = *data;
platform_device_register(&at91rm9200_cf_device);
}
@@ -257,11 +286,11 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE)
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
static u64 mmc_dmamask = 0xffffffffUL;
static struct at91_mmc_data mmc_data;
-static struct resource at91_mmc_resources[] = {
+static struct resource mmc_resources[] = {
[0] = {
.start = AT91RM9200_BASE_MCI,
.end = AT91RM9200_BASE_MCI + SZ_16K - 1,
@@ -282,8 +311,8 @@ static struct platform_device at91rm9200_mmc_device = {
.coherent_dma_mask = 0xffffffff,
.platform_data = &mmc_data,
},
- .resource = at91_mmc_resources,
- .num_resources = ARRAY_SIZE(at91_mmc_resources),
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(struct at91_mmc_data *data)
@@ -298,31 +327,33 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
}
if (data->wp_pin)
at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
at91_set_A_periph(AT91_PIN_PA27, 0);
- if (data->is_b) {
+ if (data->slot_b) {
/* CMD */
- at91_set_B_periph(AT91_PIN_PA8, 0);
+ at91_set_B_periph(AT91_PIN_PA8, 1);
/* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA9, 0);
+ at91_set_B_periph(AT91_PIN_PA9, 1);
if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA10, 0);
- at91_set_B_periph(AT91_PIN_PA11, 0);
- at91_set_B_periph(AT91_PIN_PA12, 0);
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ at91_set_B_periph(AT91_PIN_PA11, 1);
+ at91_set_B_periph(AT91_PIN_PA12, 1);
}
} else {
/* CMD */
- at91_set_A_periph(AT91_PIN_PA28, 0);
+ at91_set_A_periph(AT91_PIN_PA28, 1);
/* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA29, 0);
+ at91_set_A_periph(AT91_PIN_PA29, 1);
if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PB3, 0);
- at91_set_B_periph(AT91_PIN_PB4, 0);
- at91_set_B_periph(AT91_PIN_PB5, 0);
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ at91_set_B_periph(AT91_PIN_PB5, 1);
}
}
@@ -341,29 +372,45 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
static struct at91_nand_data nand_data;
-static struct resource at91_nand_resources[] = {
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
{
- .start = AT91_SMARTMEDIA_BASE,
- .end = AT91_SMARTMEDIA_BASE + SZ_8M - 1,
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_8M - 1,
.flags = IORESOURCE_MEM,
}
};
-static struct platform_device at91_nand_device = {
+static struct platform_device at91rm9200_nand_device = {
.name = "at91_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
- .resource = at91_nand_resources,
- .num_resources = ARRAY_SIZE(at91_nand_resources),
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
};
void __init at91_add_device_nand(struct at91_nand_data *data)
{
+ unsigned int csa;
+
if (!data)
return;
+ /* enable the address range of CS3 */
+ csa = at91_sys_read(AT91_EBI_CSA);
+ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(5)
+ | AT91_SMC_TDF_(1)
+ | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
+ | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */
+ );
+
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
@@ -380,7 +427,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
nand_data = *data;
- platform_device_register(&at91_nand_device);
+ platform_device_register(&at91rm9200_nand_device);
}
#else
void __init at91_add_device_nand(struct at91_nand_data *data) {}
@@ -392,10 +439,25 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_TWI,
+ .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_TWI,
+ .end = AT91RM9200_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device at91rm9200_twi_device = {
.name = "at91_i2c",
.id = -1,
- .num_resources = 0,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
};
void __init at91_add_device_i2c(void)
@@ -421,7 +483,7 @@ void __init at91_add_device_i2c(void) {}
#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
static u64 spi_dmamask = 0xffffffffUL;
-static struct resource at91_spi_resources[] = {
+static struct resource spi_resources[] = {
[0] = {
.start = AT91RM9200_BASE_SPI,
.end = AT91RM9200_BASE_SPI + SZ_16K - 1,
@@ -438,14 +500,14 @@ static struct platform_device at91rm9200_spi_device = {
.name = "at91_spi",
.id = 0,
.dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
},
- .resource = at91_spi_resources,
- .num_resources = ARRAY_SIZE(at91_spi_resources),
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
};
-static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
@@ -461,7 +523,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
if (devices[i].controller_data)
cs_pin = (unsigned long) devices[i].controller_data;
else
- cs_pin = at91_spi_standard_cs[devices[i].chip_select];
+ cs_pin = spi_standard_cs[devices[i].chip_select];
#ifdef CONFIG_SPI_AT91_MANUAL_CS
at91_set_gpio_output(cs_pin, 1);
@@ -474,7 +536,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
}
spi_register_board_info(devices, nr_devices);
- at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi");
+ at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
platform_device_register(&at91rm9200_spi_device);
}
#else
@@ -486,7 +548,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* RTC
* -------------------------------------------------------------------- */
-#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE)
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct platform_device at91rm9200_rtc_device = {
.name = "at91_rtc",
.id = -1,
@@ -506,7 +568,7 @@ static void __init at91_add_device_rtc(void) {}
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
static struct platform_device at91rm9200_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c
index 07c9cea8961d..b999e192a7e9 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_time.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_time.c
@@ -30,6 +30,8 @@
#include <asm/io.h>
#include <asm/mach/time.h>
+#include <asm/arch/at91_st.h>
+
static unsigned long last_crtr;
/*
@@ -99,6 +101,9 @@ void at91rm9200_timer_reset(void)
/* Set Period Interval timer */
at91_sys_write(AT91_ST_PIMR, LATCH);
+ /* Clear any pending interrupts */
+ (void) at91_sys_read(AT91_ST_SR);
+
/* Enable Period Interval Timer interrupt */
at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
}
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c
new file mode 100644
index 000000000000..203f073a53e6
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam9260.c
@@ -0,0 +1,294 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9260.c
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9260_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
+ .length = AT91SAM9260_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
+ .length = AT91SAM9260_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart4_clk = {
+ .name = "usart4_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart5_clk = {
+ .name = "usart5_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &adc_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc
+ // tc0 .. tc2
+ &ohci_clk,
+ &ether_clk,
+ &isi_clk,
+ &usart3_clk,
+ &usart4_clk,
+ &usart5_clk,
+ // tc3 .. tc5
+ // irq0 .. irq2
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9260_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9260_gpio[] = {
+ {
+ .id = AT91SAM9260_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9260_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9260_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at91sam9260_reset(void)
+{
+#warning "Implement CPU reset"
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+
+ at91_arch_reset = at91sam9260_reset;
+ at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+ | (1 << AT91SAM9260_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9260_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9260_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 0, /* Analog-to-Digital Converter */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller */
+ 0,
+ 0,
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+ 6, /* USART 3 */
+ 6, /* USART 4 */
+ 6, /* USART 5 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9260_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c
new file mode 100644
index 000000000000..a6c596dc4516
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam9260_devices.c
@@ -0,0 +1,866 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ *
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_UHP_BASE,
+ .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_UHP,
+ .end = AT91SAM9260_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_UDP,
+ .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_UDP,
+ .end = AT91SAM9260_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct eth_platform_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_EMAC,
+ .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_EMAC,
+ .end = AT91SAM9260_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct eth_platform_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9260_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct eth_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_MCI,
+ .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_MCI,
+ .end = AT91SAM9260_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA8, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA6, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9260_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9260_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9260_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_TWI,
+ .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_TWI,
+ .end = AT91SAM9260_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ platform_device_register(&at91sam9260_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SPI0,
+ .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SPI0,
+ .end = AT91SAM9260_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SPI1,
+ .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SPI1,
+ .end = AT91SAM9260_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9260_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9260_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9260_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US0,
+ .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US0,
+ .end = AT91SAM9260_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US1,
+ .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US1,
+ .end = AT91SAM9260_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US2,
+ .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US2,
+ .end = AT91SAM9260_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US3,
+ .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US3,
+ .end = AT91SAM9260_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .platform_data = &uart3_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
+}
+
+static struct resource uart4_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US4,
+ .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US4,
+ .end = AT91SAM9260_ID_US4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart4_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart4_device = {
+ .name = "atmel_usart",
+ .id = 5,
+ .dev = {
+ .platform_data = &uart4_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart4_resources,
+ .num_resources = ARRAY_SIZE(uart4_resources),
+};
+
+static inline void configure_usart4_pins(void)
+{
+ at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
+}
+
+static struct resource uart5_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US5,
+ .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US5,
+ .end = AT91SAM9260_ID_US5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart5_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart5_device = {
+ .name = "atmel_usart",
+ .id = 6,
+ .dev = {
+ .platform_data = &uart5_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart5_resources,
+ .num_resources = ARRAY_SIZE(uart5_resources),
+};
+
+static inline void configure_usart5_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9260_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9260_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9260_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_usart3_pins();
+ at91_uarts[i] = &at91sam9260_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
+ break;
+ case 4:
+ configure_usart4_pins();
+ at91_uarts[i] = &at91sam9260_uart4_device;
+ at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
+ break;
+ case 5:
+ configure_usart5_pins();
+ at91_uarts[i] = &at91sam9260_uart5_device;
+ at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
+ break;
+ case 6:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9260_dbgu_device;
+ at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c
new file mode 100644
index 000000000000..5a82f35da2e9
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam9261.c
@@ -0,0 +1,289 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9261.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9261_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
+ .length = AT91SAM9261_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc 0 .. ssc2
+ // tc0 .. tc2
+ &ohci_clk,
+ &lcdc_clk,
+ // irq0 .. irq2
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
+static void __init at91sam9261_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+
+ clk_register(&hck0);
+ clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9261_gpio[] = {
+ {
+ .id = AT91SAM9261_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9261_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9261_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at91sam9261_reset(void)
+{
+#warning "Implement CPU reset"
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9261 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+
+ at91_arch_reset = at91sam9261_reset;
+ at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+ | (1 << AT91SAM9261_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9261_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9261_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 0,
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* LCD Controller */
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9261_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91rm9200/at91sam9261_devices.c
new file mode 100644
index 000000000000..ed1d79081b35
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam9261_devices.c
@@ -0,0 +1,741 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ *
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_UHP_BASE,
+ .end = AT91SAM9261_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_UHP,
+ .end = AT91SAM9261_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at91sam9261_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_UDP,
+ .end = AT91SAM9261_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_UDP,
+ .end = AT91SAM9261_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ unsigned long x;
+
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally */
+ x = at91_sys_read(AT91_MATRIX_USBPUCR);
+ at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+
+ udc_data = *data;
+ platform_device_register(&at91sam9261_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_MCI,
+ .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_MCI,
+ .end = AT91SAM9261_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_B_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA6, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9261_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_TWI,
+ .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_TWI,
+ .end = AT91SAM9261_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+ platform_device_register(&at91sam9261_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SPI0,
+ .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SPI0,
+ .end = AT91SAM9261_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SPI1,
+ .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SPI1,
+ .end = AT91SAM9261_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9261_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9261_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct at91fb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_LCDC_BASE,
+ .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_LCDC,
+ .end = AT91SAM9261_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+#if defined(CONFIG_FB_INTSRAM)
+ [2] = {
+ .start = AT91SAM9261_SRAM_BASE,
+ .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "at91-fb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct at91fb_info *data)
+{
+ if (!data) {
+ return;
+ }
+
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9261_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US0,
+ .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US0,
+ .end = AT91SAM9261_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US1,
+ .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US1,
+ .end = AT91SAM9261_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US2,
+ .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US2,
+ .end = AT91SAM9261_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9261_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9261_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9261_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9261_dbgu_device;
+ at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91rm9200/at91sam926x_time.c
new file mode 100644
index 000000000000..99df5f6ee42e
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam926x_time.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_pit.h>
+
+
+#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
+#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
+
+/*
+ * Returns number of microseconds since last timer interrupt. Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91sam926x_gettimeoffset(void)
+{
+ unsigned long elapsed;
+ unsigned long t = at91_sys_read(AT91_PIT_PIIR);
+
+ elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
+
+ return (unsigned long)(elapsed * 1000000) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
+{
+ volatile long nr_ticks;
+
+ if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
+ write_seqlock(&xtime_lock);
+
+ /* Get number to ticks performed before interrupt and clear PIT interrupt */
+ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+ do {
+ timer_tick();
+ nr_ticks--;
+ } while (nr_ticks);
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+ } else
+ return IRQ_NONE; /* not handled */
+}
+
+static struct irqaction at91sam926x_timer_irq = {
+ .name = "at91_tick",
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+ .handler = at91sam926x_timer_interrupt
+};
+
+void at91sam926x_timer_reset(void)
+{
+ /* Disable timer */
+ at91_sys_write(AT91_PIT_MR, 0);
+
+ /* Clear any pending interrupts */
+ (void) at91_sys_read(AT91_PIT_PIVR);
+
+ /* Set Period Interval timer and enable its interrupt */
+ at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91sam926x_timer_init(void)
+{
+ /* Initialize and enable the timer */
+ at91sam926x_timer_reset();
+
+ /* Make IRQs happen for the system timer. */
+ setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
+}
+
+#ifdef CONFIG_PM
+static void at91sam926x_timer_suspend(void)
+{
+ /* Disable timer */
+ at91_sys_write(AT91_PIT_MR, 0);
+}
+#else
+#define at91sam926x_timer_suspend NULL
+#endif
+
+struct sys_timer at91sam926x_timer = {
+ .init = at91sam926x_timer_init,
+ .offset = at91sam926x_gettimeoffset,
+ .suspend = at91sam926x_timer_suspend,
+ .resume = at91sam926x_timer_reset,
+};
+
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c
index 98208740e7c5..654f0379550a 100644
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ b/arch/arm/mach-at91rm9200/board-carmeva.c
@@ -65,7 +65,6 @@ static void __init carmeva_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
-
static struct at91_eth_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -89,8 +88,33 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// };
static struct at91_mmc_data __initdata carmeva_mmc_data = {
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
+ .det_pin = AT91_PIN_PB10,
+ .wp_pin = AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
+ { /* User accessable spi - cs1 (250KHz) */
+ .modalias = "spi-cs1",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* User accessable spi - cs2 (1MHz) */
+ .modalias = "spi-cs2",
+ .chip_select = 2,
+ .max_speed_hz = 1 * 1000 * 1000,
+ },
+ { /* User accessable spi - cs3 (10MHz) */
+ .modalias = "spi-cs3",
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
};
static void __init carmeva_board_init(void)
@@ -105,10 +129,10 @@ static void __init carmeva_board_init(void)
at91_add_device_udc(&carmeva_udc_data);
/* I2C */
at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
- /* SPI */
-// at91_add_device_spi(NULL, 0);
/* MMC */
at91_add_device_mmc(&carmeva_mmc_data);
}
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index 8eeae491ce71..b8bb8052607a 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -99,7 +99,7 @@ static struct at91_cf_data __initdata csb337_cf_data = {
static struct at91_mmc_data __initdata csb337_mmc_data = {
.det_pin = AT91_PIN_PD5,
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
};
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
index c699f3984d4b..7522bf91bce8 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -39,6 +40,7 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
#include "generic.h"
@@ -93,7 +95,7 @@ static struct at91_cf_data __initdata dk_cf_data = {
};
static struct at91_mmc_data __initdata dk_mmc_data = {
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
};
@@ -145,6 +147,30 @@ static struct at91_nand_data __initdata dk_nand_data = {
.partition_info = nand_partitions,
};
+#define DK_FLASH_BASE AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE 0x200000
+
+static struct physmap_flash_data dk_flash_data = {
+ .width = 2,
+};
+
+static struct resource dk_flash_resource = {
+ .start = DK_FLASH_BASE,
+ .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dk_flash_data,
+ },
+ .resource = &dk_flash_resource,
+ .num_resources = 1,
+};
+
+
static void __init dk_board_init(void)
{
/* Serial */
@@ -172,6 +198,8 @@ static void __init dk_board_init(void)
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c
index 65e867ba2df3..80b72cf7264c 100644
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ b/arch/arm/mach-at91rm9200/board-eb9200.c
@@ -87,7 +87,7 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
};
static struct at91_mmc_data __initdata eb9200_mmc_data = {
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
};
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 830eb7932178..c4fdb415f20e 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -39,6 +40,7 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
#include "generic.h"
@@ -87,7 +89,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
};
@@ -107,6 +109,30 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
+#define EK_FLASH_BASE AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE 0x200000
+
+static struct physmap_flash_data ek_flash_data = {
+ .width = 2,
+};
+
+static struct resource ek_flash_resource = {
+ .start = EK_FLASH_BASE,
+ .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ek_flash_data,
+ },
+ .resource = &ek_flash_resource,
+ .num_resources = 1,
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -130,6 +156,8 @@ static void __init ek_board_init(void)
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(&ek_mmc_data);
#endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
/* VGA */
// ek_add_device_video();
}
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
index 35a954a44b1b..759d8191854f 100644
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ b/arch/arm/mach-at91rm9200/board-kb9202.c
@@ -84,7 +84,7 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
static struct at91_mmc_data __initdata kb9202_mmc_data = {
.det_pin = AT91_PIN_PB2,
- .is_b = 0,
+ .slot_b = 0,
.wire4 = 1,
};
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c
new file mode 100644
index 000000000000..ffca9bdec37b
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-sam9260ek.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 5 = USART0 .. USART5
+ * 6 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 3,
+ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#endif
+#if defined(CONFIG_SND_AT73C213)
+ { /* AT73C213 DAC */
+ .modalias = "snd_at73c213",
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 1,
+ },
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct __initdata eth_platform_data ek_macb_data = {
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1,
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+ at91_add_device_mmc(&ek_mmc_data);
+}
+
+MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91rm9200/board-sam9261ek.c
new file mode 100644
index 000000000000..30b490d8886b
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-sam9261ek.c
@@ -0,0 +1,259 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dm9000.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 2 = USART0 .. USART2
+ * 3 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 1,
+ .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9261_initialize(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9261_init_interrupts(NULL);
+}
+
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DM9000)
+static struct resource at91sam9261_dm9000_resource[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_2,
+ .end = AT91_CHIPSELECT_2 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = AT91_CHIPSELECT_2 + 0x44,
+ .end = AT91_CHIPSELECT_2 + 0xFF,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = AT91_PIN_PC11,
+ .end = AT91_PIN_PC11,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device at91sam9261_dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource),
+ .resource = at91sam9261_dm9000_resource,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static void __init ek_add_device_dm9000(void)
+{
+ /*
+ * Configure Chip-Select 2 on SMC for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000
+ * according to the DM9000 timings.
+ */
+ at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+ at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+ /* Configure Reset signal as output */
+ at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(AT91_PIN_PC11, 0);
+
+ platform_device_register(&at91sam9261_dm9000_device);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DM9000 */
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB29,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024 ,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 22,
+ .cle = 21,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC15,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#elif defined(CONFIG_SND_AT73C213)
+ { /* AT73C213 DAC */
+ .modalias = "snd_at73c213",
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* DM9000 ethernet */
+ ek_add_device_dm9000();
+
+ /* spi0 and mmc/sd share the same PIO pins */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#else
+ /* MMC */
+ at91_add_device_mmc(&ek_mmc_data);
+#endif
+}
+
+MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index a43b061a7c85..4dee21fefe5a 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -28,6 +28,8 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/cpu.h>
#include "clock.h"
@@ -41,6 +43,7 @@
#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
+#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
static LIST_HEAD(clocks);
@@ -114,13 +117,11 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
static struct clk udpck = {
.name = "udpck",
.parent = &pllb,
- .pmc_mask = AT91_PMC_UDP,
.mode = pmc_sys_mode,
};
static struct clk uhpck = {
.name = "uhpck",
.parent = &pllb,
- .pmc_mask = AT91_PMC_UHP,
.mode = pmc_sys_mode,
};
@@ -434,6 +435,12 @@ int __init clk_register(struct clk *clk)
clk->mode = pmc_periph_mode;
list_add_tail(&clk->node, &clocks);
}
+ else if (clk_is_sys(clk)) {
+ clk->parent = &mck;
+ clk->mode = pmc_sys_mode;
+
+ list_add_tail(&clk->node, &clocks);
+ }
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
else if (clk_is_programmable(clk)) {
clk->mode = pmc_sys_mode;
@@ -586,9 +593,21 @@ int __init at91_clock_init(unsigned long main_clock)
*/
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
+ } else if (cpu_is_at91sam9261()) {
+ uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
+ }
at91_sys_write(AT91_CKGR_PLLBR, 0);
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h
index 0592e662ab37..b5c7a2eb2d1d 100644
--- a/arch/arm/mach-at91rm9200/clock.h
+++ b/arch/arm/mach-at91rm9200/clock.h
@@ -10,6 +10,7 @@
#define CLK_TYPE_PLL 0x2
#define CLK_TYPE_PROGRAMMABLE 0x4
#define CLK_TYPE_PERIPHERAL 0x8
+#define CLK_TYPE_SYSTEM 0x10
struct clk {
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h
index 694e411e285f..8c4d5a77d485 100644
--- a/arch/arm/mach-at91rm9200/generic.h
+++ b/arch/arm/mach-at91rm9200/generic.h
@@ -10,14 +10,19 @@
/* Processors */
extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91sam9260_initialize(unsigned long main_clock);
+extern void __init at91sam9261_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
+extern struct sys_timer at91sam926x_timer;
/* Clocks */
extern int __init at91_clock_init(unsigned long main_clock);
@@ -39,3 +44,6 @@ struct at91_gpio_bank {
};
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);
+
+extern void (*at91_arch_reset)(void);
+extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 7467d644f0a3..3f188508c391 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -19,6 +19,8 @@
#include <asm/io.h>
#include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
#include "generic.h"
@@ -332,10 +334,10 @@ static struct irq_chip gpio_irqchip = {
.set_wake = gpio_irq_set_wake,
};
-static void gpio_irq_handler(unsigned irq, struct irqdesc *desc)
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
unsigned pin;
- struct irqdesc *gpio;
+ struct irq_desc *gpio;
void __iomem *pio;
u32 isr;
@@ -396,7 +398,7 @@ void __init at91_gpio_irq_setup(void)
__raw_writel(~0, controller + PIO_IDR);
set_irq_data(id, (void *) pin);
- set_irq_chipdata(id, controller);
+ set_irq_chip_data(id, controller);
for (i = 0; i < 32; i++, pin++) {
/*
@@ -404,7 +406,7 @@ void __init at91_gpio_irq_setup(void)
* shorter, and the AIC handles interupts sanely.
*/
set_irq_chip(pin, &gpio_irqchip);
- set_irq_handler(pin, do_simple_IRQ);
+ set_irq_handler(pin, handle_simple_irq);
set_irq_flags(pin, IRQF_VALID);
}
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index 3e488117ca91..2148daafd29c 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -47,6 +47,10 @@ static void at91_aic_unmask_irq(unsigned int irq)
at91_sys_write(AT91_AIC_IECR, 1 << irq);
}
+unsigned int at91_extern_irq;
+
+#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+
static int at91_aic_set_type(unsigned irq, unsigned type)
{
unsigned int smr, srctype;
@@ -59,14 +63,16 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQT_LOW:
- if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_LOW;
+ else
return -EINVAL;
- srctype = AT91_AIC_SRCTYPE_LOW;
break;
case IRQT_FALLING:
- if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_FALLING;
+ else
return -EINVAL;
- srctype = AT91_AIC_SRCTYPE_FALLING;
break;
default:
return -EINVAL;
@@ -139,7 +145,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
set_irq_chip(i, &at91_aic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
index 32c95d8eaacf..67aa5572a3ea 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91rm9200/pm.c
@@ -26,7 +26,10 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
#include "generic.h"
@@ -68,9 +71,15 @@ static int at91_pm_verify_clocks(void)
scsr = at91_sys_read(AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & (AT91_PMC_UHP | AT91_PMC_UDP)) != 0) {
- pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
+ if (cpu_is_at91rm9200()) {
+ if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
+ } else if (cpu_is_at91sam9260()) {
+#warning "Check SAM9260 USB clocks"
+ } else if (cpu_is_at91sam9261()) {
+#warning "Check SAM9261 USB clocks"
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -112,7 +121,6 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*slow_clock)(void);
-
static int at91_pm_enter(suspend_state_t state)
{
at91_gpio_suspend();
@@ -123,13 +131,7 @@ static int at91_pm_enter(suspend_state_t state)
(at91_sys_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
- | (1 << AT91RM9200_ID_IRQ0)
- | (1 << AT91RM9200_ID_IRQ1)
- | (1 << AT91RM9200_ID_IRQ2)
- | (1 << AT91RM9200_ID_IRQ3)
- | (1 << AT91RM9200_ID_IRQ4)
- | (1 << AT91RM9200_ID_IRQ5)
- | (1 << AT91RM9200_ID_IRQ6))
+ | (at91_extern_irq))
& at91_sys_read(AT91_AIC_IMR),
state);
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index 7ee926e5bad2..ca102960f528 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -63,7 +63,7 @@ static void int1_unmask(unsigned int irq)
clps_writel(intmr1, INTMR1);
}
-static struct irqchip int1_chip = {
+static struct irq_chip int1_chip = {
.ack = int1_ack,
.mask = int1_mask,
.unmask = int1_unmask,
@@ -100,7 +100,7 @@ static void int2_unmask(unsigned int irq)
clps_writel(intmr2, INTMR2);
}
-static struct irqchip int2_chip = {
+static struct irq_chip int2_chip = {
.ack = int2_ack,
.mask = int2_mask,
.unmask = int2_unmask,
@@ -112,12 +112,12 @@ void __init clps711x_init_irq(void)
for (i = 0; i < NR_IRQS; i++) {
if (INT1_IRQS & (1 << i)) {
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_chip(i, &int1_chip);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
if (INT2_IRQS & (1 << i)) {
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_chip(i, &int2_chip);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index fb10cf252588..231b90004736 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -57,7 +57,7 @@ static void cl7500_unmask_irq_a(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKA);
}
-static struct irqchip clps7500_a_chip = {
+static struct irq_chip clps7500_a_chip = {
.ack = cl7500_ack_irq_a,
.mask = cl7500_mask_irq_a,
.unmask = cl7500_unmask_irq_a,
@@ -81,7 +81,7 @@ static void cl7500_unmask_irq_b(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKB);
}
-static struct irqchip clps7500_b_chip = {
+static struct irq_chip clps7500_b_chip = {
.ack = cl7500_mask_irq_b,
.mask = cl7500_mask_irq_b,
.unmask = cl7500_unmask_irq_b,
@@ -105,7 +105,7 @@ static void cl7500_unmask_irq_c(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKC);
}
-static struct irqchip clps7500_c_chip = {
+static struct irq_chip clps7500_c_chip = {
.ack = cl7500_mask_irq_c,
.mask = cl7500_mask_irq_c,
.unmask = cl7500_unmask_irq_c,
@@ -129,7 +129,7 @@ static void cl7500_unmask_irq_d(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKD);
}
-static struct irqchip clps7500_d_chip = {
+static struct irq_chip clps7500_d_chip = {
.ack = cl7500_mask_irq_d,
.mask = cl7500_mask_irq_d,
.unmask = cl7500_unmask_irq_d,
@@ -153,7 +153,7 @@ static void cl7500_unmask_irq_dma(unsigned int irq)
iomd_writeb(val | mask, IOMD_DMAMASK);
}
-static struct irqchip clps7500_dma_chip = {
+static struct irq_chip clps7500_dma_chip = {
.ack = cl7500_mask_irq_dma,
.mask = cl7500_mask_irq_dma,
.unmask = cl7500_unmask_irq_dma,
@@ -177,7 +177,7 @@ static void cl7500_unmask_irq_fiq(unsigned int irq)
iomd_writeb(val | mask, IOMD_FIQMASK);
}
-static struct irqchip clps7500_fiq_chip = {
+static struct irq_chip clps7500_fiq_chip = {
.ack = cl7500_mask_irq_fiq,
.mask = cl7500_mask_irq_fiq,
.unmask = cl7500_unmask_irq_fiq,
@@ -187,7 +187,7 @@ static void cl7500_no_action(unsigned int irq)
{
}
-static struct irqchip clps7500_no_chip = {
+static struct irq_chip clps7500_no_chip = {
.ack = cl7500_no_action,
.mask = cl7500_no_action,
.unmask = cl7500_no_action,
@@ -214,43 +214,43 @@ static void __init clps7500_init_irq(void)
switch (irq) {
case 0 ... 7:
set_irq_chip(irq, &clps7500_a_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 8 ... 15:
set_irq_chip(irq, &clps7500_b_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 16 ... 22:
set_irq_chip(irq, &clps7500_dma_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 24 ... 31:
set_irq_chip(irq, &clps7500_c_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 40 ... 47:
set_irq_chip(irq, &clps7500_d_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 48 ... 55:
set_irq_chip(irq, &clps7500_no_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 64 ... 72:
set_irq_chip(irq, &clps7500_fiq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
}
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 90103ab373a6..8459431cfd71 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -45,7 +45,7 @@ static void ebsa110_unmask_irq(unsigned int irq)
__raw_writeb(1 << irq, IRQ_MSET);
}
-static struct irqchip ebsa110_irq_chip = {
+static struct irq_chip ebsa110_irq_chip = {
.ack = ebsa110_mask_irq,
.mask = ebsa110_mask_irq,
.unmask = ebsa110_unmask_irq,
@@ -67,7 +67,7 @@ static void __init ebsa110_init_irq(void)
for (irq = 0; irq < NR_IRQS; irq++) {
set_irq_chip(irq, &ebsa110_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index e346b03cd921..af7904b3d0a8 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,12 +9,24 @@ config CRUNCH
comment "EP93xx Platforms"
+config MACH_ADSSPHERE
+ bool "Support ADS Sphere"
+ help
+ Say 'Y' here if you want your kernel to support the ADS
+ Sphere board.
+
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
+config MACH_EDB9302A
+ bool "Support Cirrus Logic EDB9302A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302A Evaluation Board.
+
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index c2eb18b530c2..b06641dd450d 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,7 +6,9 @@ obj-m :=
obj-n :=
obj- :=
+obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
obj-$(CONFIG_MACH_EDB9302) += edb9302.o
+obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o
obj-$(CONFIG_MACH_EDB9312) += edb9312.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
new file mode 100644
index 000000000000..ac5d5818eb7b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-ep93xx/adssphere.c
+ * ADS Sphere support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data adssphere_flash_data = {
+ .width = 4,
+};
+
+static struct resource adssphere_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x61ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device adssphere_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &adssphere_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &adssphere_flash_resource,
+};
+
+static struct ep93xx_eth_data adssphere_eth_data = {
+ .phy_id = 1,
+};
+
+static struct resource adssphere_eth_resource[] = {
+ {
+ .start = EP93XX_ETHERNET_PHYS_BASE,
+ .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_ETHERNET,
+ .end = IRQ_EP93XX_ETHERNET,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device adssphere_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = &adssphere_eth_data,
+ },
+ .num_resources = 2,
+ .resource = adssphere_eth_resource,
+};
+
+static void __init adssphere_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&adssphere_flash);
+
+ memcpy(adssphere_eth_data.dev_addr,
+ (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+ platform_device_register(&adssphere_eth_device);
+}
+
+MACHINE_START(ADSSPHERE, "ADS Sphere board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = adssphere_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e3fd1ab6adcc..d649b39711d4 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -245,7 +245,7 @@ EXPORT_SYMBOL(gpio_line_set);
* EP93xx IRQ handling
*************************************************************************/
static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned char status;
int i;
@@ -335,7 +335,7 @@ static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
return 0;
}
-static struct irqchip ep93xx_gpio_ab_irq_chip = {
+static struct irq_chip ep93xx_gpio_ab_irq_chip = {
.ack = ep93xx_gpio_ab_irq_mask_ack,
.mask = ep93xx_gpio_ab_irq_mask,
.unmask = ep93xx_gpio_ab_irq_unmask,
@@ -352,7 +352,7 @@ void __init ep93xx_init_irq(void)
for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
new file mode 100644
index 000000000000..62e064bab1d2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302a.c
+ * Cirrus Logic EDB9302A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9302a_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9302a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9302a_flash_resource,
+};
+
+static struct ep93xx_eth_data edb9302a_eth_data = {
+ .phy_id = 1,
+};
+
+static struct resource edb9302a_eth_resource[] = {
+ {
+ .start = EP93XX_ETHERNET_PHYS_BASE,
+ .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_ETHERNET,
+ .end = IRQ_EP93XX_ETHERNET,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device edb9302a_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = &edb9302a_eth_data,
+ },
+ .num_resources = 2,
+ .resource = edb9302a_eth_resource,
+};
+
+static void __init edb9302a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9302a_flash);
+
+ memcpy(edb9302a_eth_data.dev_addr,
+ (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+ platform_device_register(&edb9302a_eth_device);
+}
+
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9302a_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index af900f4755a4..ef29fc34ce65 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -78,7 +78,7 @@ static void fb_unmask_irq(unsigned int irq)
*CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)];
}
-static struct irqchip fb_chip = {
+static struct irq_chip fb_chip = {
.ack = fb_mask_irq,
.mask = fb_mask_irq,
.unmask = fb_unmask_irq,
@@ -96,7 +96,7 @@ static void __init __fb_init_irq(void)
for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
set_irq_chip(irq, &fb_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 888dedd501b9..79443ffc8916 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -49,7 +49,7 @@ static void isa_unmask_pic_lo_irq(unsigned int irq)
outb(inb(PIC_MASK_LO) & ~mask, PIC_MASK_LO);
}
-static struct irqchip isa_lo_chip = {
+static struct irq_chip isa_lo_chip = {
.ack = isa_ack_pic_lo_irq,
.mask = isa_mask_pic_lo_irq,
.unmask = isa_unmask_pic_lo_irq,
@@ -78,14 +78,14 @@ static void isa_unmask_pic_hi_irq(unsigned int irq)
outb(inb(PIC_MASK_HI) & ~mask, PIC_MASK_HI);
}
-static struct irqchip isa_hi_chip = {
+static struct irq_chip isa_hi_chip = {
.ack = isa_ack_pic_hi_irq,
.mask = isa_mask_pic_hi_irq,
.unmask = isa_unmask_pic_hi_irq,
};
static void
-isa_irq_handler(unsigned int irq, struct irqdesc *desc)
+isa_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int isa_irq = *(unsigned char *)PCIIACK_BASE;
@@ -150,13 +150,13 @@ void __init isa_init_irq(unsigned int host_irq)
if (host_irq != (unsigned int)-1) {
for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) {
set_irq_chip(irq, &isa_lo_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) {
set_irq_chip(irq, &isa_hi_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 4719229a1a78..7f31816896ad 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -101,7 +101,7 @@ static void inline unmask_gpio_irq(u32 irq)
static void
h720x_gpio_handler(unsigned int mask, unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
IRQDBG("%s irq: %d\n",__FUNCTION__,irq);
desc = irq_desc + irq;
@@ -117,7 +117,7 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq,
}
static void
-h720x_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -128,7 +128,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-h720x_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
@@ -138,7 +138,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-h720x_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -149,7 +149,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-h720x_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -161,7 +161,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
#ifdef CONFIG_CPU_H7202
static void
-h720x_gpioe_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -172,13 +172,13 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
#endif
-static struct irqchip h720x_global_chip = {
+static struct irq_chip h720x_global_chip = {
.ack = mask_global_irq,
.mask = mask_global_irq,
.unmask = unmask_global_irq,
};
-static struct irqchip h720x_gpio_chip = {
+static struct irq_chip h720x_gpio_chip = {
.ack = ack_gpio_irq,
.mask = mask_gpio_irq,
.unmask = unmask_gpio_irq,
@@ -203,14 +203,14 @@ void __init h720x_init_irq (void)
/* Initialize global IRQ's, fast path */
for (irq = 0; irq < NR_GLBL_IRQS; irq++) {
set_irq_chip(irq, &h720x_global_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* Initialize multiplexed IRQ's, slow path */
for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) {
set_irq_chip(irq, &h720x_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID );
}
set_irq_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler);
@@ -221,7 +221,7 @@ void __init h720x_init_irq (void)
#ifdef CONFIG_CPU_H7202
for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) {
set_irq_chip(irq, &h720x_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID );
}
set_irq_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler);
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 06fecaefd8dc..703870f30adf 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -106,7 +106,7 @@ static struct platform_device *devices[] __initdata = {
* we have to handle all timer interrupts in one place.
*/
static void
-h7202_timerx_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -162,7 +162,7 @@ static void inline unmask_timerx_irq (u32 irq)
CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
}
-static struct irqchip h7202_timerx_chip = {
+static struct irq_chip h7202_timerx_chip = {
.ack = mask_timerx_irq,
.mask = mask_timerx_irq,
.unmask = unmask_timerx_irq,
@@ -202,7 +202,7 @@ void __init h7202_init_irq (void)
irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
mask_timerx_irq(irq);
set_irq_chip(irq, &h7202_timerx_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID );
}
set_irq_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 12ea58a3b84f..b5aa49d00ca3 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -104,6 +104,9 @@ EXPORT_SYMBOL(imx_gpio_mode);
*/
static unsigned int imx_decode_pll(unsigned int pll)
{
+ unsigned long long ll;
+ unsigned long quot;
+
u32 mfi = (pll >> 10) & 0xf;
u32 mfn = pll & 0x3ff;
u32 mfd = (pll >> 16) & 0x3ff;
@@ -112,7 +115,11 @@ static unsigned int imx_decode_pll(unsigned int pll)
mfi = mfi <= 5 ? 5 : mfi;
- return (2 * (f_ref>>10) * ( (mfi<<10) + (mfn<<10) / (mfd+1) )) / (pd+1);
+ ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
+ quot = (pd+1) * (1<<16);
+ ll += quot / 2;
+ do_div(ll, quot);
+ return (unsigned int) ll;
}
unsigned int imx_get_system_clk(void)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 368b13b058ab..0791b56caecc 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -146,7 +146,7 @@ imx_gpio_unmask_irq(unsigned int irq)
static void
imx_gpio_handler(unsigned int mask, unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
desc = irq_desc + irq;
while (mask) {
@@ -161,7 +161,7 @@ imx_gpio_handler(unsigned int mask, unsigned int irq,
}
static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -171,7 +171,7 @@ imx_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -181,7 +181,7 @@ imx_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -191,7 +191,7 @@ imx_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
}
static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int mask, irq;
@@ -230,13 +230,13 @@ imx_init_irq(void)
for (irq = 0; irq < IMX_IRQS; irq++) {
set_irq_chip(irq, &imx_internal_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
set_irq_chip(irq, &imx_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 8ae4a2c5066f..40039b2a90b3 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
+#include <linux/clocksource.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -24,33 +25,7 @@
/* Use timer 1 as system timer */
#define TIMER_BASE IMX_TIM1_BASE
-/*
- * Returns number of us since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long imx_gettimeoffset(void)
-{
- unsigned long ticks;
-
- /*
- * Get the current number of ticks. Note that there is a race
- * condition between us reading the timer and checking for
- * an interrupt. We get around this by ensuring that the
- * counter has not reloaded between our two reads.
- */
- ticks = IMX_TCN(TIMER_BASE);
-
- /*
- * Interrupt pending? If so, we've reloaded once already.
- */
- if (IMX_TSTAT(TIMER_BASE) & TSTAT_COMP)
- ticks += LATCH;
-
- /*
- * Convert the ticks to usecs
- */
- return (1000000 / CLK32) * ticks;
-}
+static unsigned long evt_diff;
/*
* IRQ handler for the timer
@@ -58,14 +33,23 @@ static unsigned long imx_gettimeoffset(void)
static irqreturn_t
imx_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
+ uint32_t tstat;
/* clear the interrupt */
- if (IMX_TSTAT(TIMER_BASE))
- IMX_TSTAT(TIMER_BASE) = 0;
+ tstat = IMX_TSTAT(TIMER_BASE);
+ IMX_TSTAT(TIMER_BASE) = 0;
+
+ if (tstat & TSTAT_COMP) {
+ do {
+
+ write_seqlock(&xtime_lock);
+ timer_tick();
+ write_sequnlock(&xtime_lock);
+ IMX_TCMP(TIMER_BASE) += evt_diff;
- timer_tick();
- write_sequnlock(&xtime_lock);
+ } while (unlikely((int32_t)(IMX_TCMP(TIMER_BASE)
+ - IMX_TCN(TIMER_BASE)) < 0));
+ }
return IRQ_HANDLED;
}
@@ -77,9 +61,9 @@ static struct irqaction imx_timer_irq = {
};
/*
- * Set up timer interrupt, and return the current time in seconds.
+ * Set up timer hardware into expected mode and state.
*/
-static void __init imx_timer_init(void)
+static void __init imx_timer_hardware_init(void)
{
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -87,7 +71,38 @@ static void __init imx_timer_init(void)
IMX_TCTL(TIMER_BASE) = 0;
IMX_TPRER(TIMER_BASE) = 0;
IMX_TCMP(TIMER_BASE) = LATCH - 1;
- IMX_TCTL(TIMER_BASE) = TCTL_CLK_32 | TCTL_IRQEN | TCTL_TEN;
+
+ IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_IRQEN | TCTL_TEN;
+ evt_diff = LATCH;
+}
+
+cycle_t imx_get_cycles(void)
+{
+ return IMX_TCN(TIMER_BASE);
+}
+
+static struct clocksource clocksource_imx = {
+ .name = "imx_timer1",
+ .rating = 200,
+ .read = imx_get_cycles,
+ .mask = 0xFFFFFFFF,
+ .shift = 20,
+ .is_continuous = 1,
+};
+
+static int __init imx_clocksource_init(void)
+{
+ clocksource_imx.mult =
+ clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift);
+ clocksource_register(&clocksource_imx);
+
+ return 0;
+}
+
+static void __init imx_timer_init(void)
+{
+ imx_timer_hardware_init();
+ imx_clocksource_init();
/*
* Make irqs happen for the system timer
@@ -97,5 +112,4 @@ static void __init imx_timer_init(void)
struct sys_timer imx_timer = {
.init = imx_timer_init,
- .offset = imx_gettimeoffset,
};
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 191c57a3b997..72280754354d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -183,7 +183,7 @@ static void __init ap_init_irq(void)
for (i = 0; i < NR_IRQS; i++) {
if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) {
set_irq_chip(i, &sc_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 771b65bffe69..913f64b22405 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -202,7 +202,7 @@ static struct irq_chip sic_chip = {
};
static void
-sic_handle_irq(unsigned int irq, struct irqdesc *desc)
+sic_handle_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned long status = sic_readl(INTCP_VA_SIC_BASE + IRQ_STATUS);
@@ -238,7 +238,7 @@ static void __init intcp_init_irq(void)
if (i == 29)
break;
set_irq_chip(i, &pic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
@@ -247,7 +247,7 @@ static void __init intcp_init_irq(void)
for (i = IRQ_CIC_START; i <= IRQ_CIC_END; i++) {
set_irq_chip(i, &cic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
@@ -256,7 +256,7 @@ static void __init intcp_init_irq(void)
for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
set_irq_chip(i, &sic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
index 1bc8534ef0c6..613b841a10f3 100644
--- a/arch/arm/mach-integrator/platsmp.c
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -18,7 +18,6 @@
#include <asm/cacheflush.h>
#include <asm/delay.h>
#include <asm/mmu_context.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/smp.h>
diff --git a/arch/arm/mach-iop13xx/Kconfig b/arch/arm/mach-iop13xx/Kconfig
new file mode 100644
index 000000000000..40c2d689f2eb
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_IOP13XX
+
+menu "IOP13XX Implementation Options"
+
+comment "IOP13XX Platform Support"
+
+config MACH_IQ81340SC
+ bool "Enable IQ81340SC Hardware Support"
+ help
+ Say Y here if you want to support running on the Intel IQ81340SC
+ evaluation kit.
+
+config MACH_IQ81340MC
+ bool "Enable IQ81340MC Hardware Support"
+ help
+ Say Y here if you want to support running on the Intel IQ81340MC
+ evaluation kit.
+
+endmenu
+endif
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
new file mode 100644
index 000000000000..c3d6c08f2d4c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -0,0 +1,12 @@
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_ARCH_IOP13XX) += setup.o
+obj-$(CONFIG_ARCH_IOP13XX) += irq.o
+obj-$(CONFIG_ARCH_IOP13XX) += time.o
+obj-$(CONFIG_ARCH_IOP13XX) += pci.o
+obj-$(CONFIG_ARCH_IOP13XX) += io.o
+obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
+obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot
new file mode 100644
index 000000000000..0b0e19fdfe6c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
new file mode 100644
index 000000000000..fbf9f88e46ea
--- /dev/null
+++ b/arch/arm/mach-iop13xx/io.c
@@ -0,0 +1,93 @@
+/*
+ * iop13xx custom ioremap implementation
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags)
+{
+ void __iomem * retval;
+
+ switch (cookie) {
+ case IOP13XX_PCIX_LOWER_MEM_RA ... IOP13XX_PCIX_UPPER_MEM_RA:
+ if (unlikely(!iop13xx_atux_mem_base))
+ retval = NULL;
+ else
+ retval = (void *)(iop13xx_atux_mem_base +
+ (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
+ break;
+ case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
+ if (unlikely(!iop13xx_atue_mem_base))
+ retval = NULL;
+ else
+ retval = (void *)(iop13xx_atue_mem_base +
+ (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
+ break;
+ case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
+ retval = __ioremap(IOP13XX_PBI_LOWER_MEM_PA +
+ (cookie - IOP13XX_PBI_LOWER_MEM_RA),
+ size, flags);
+ break;
+ case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
+ retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
+ break;
+ case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
+ retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
+ break;
+ case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
+ retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
+ break;
+ default:
+ retval = __ioremap(cookie, size, flags);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(__iop13xx_ioremap);
+
+void __iop13xx_iounmap(void __iomem *addr)
+{
+ extern void __iounmap(volatile void __iomem *addr);
+
+ if (iop13xx_atue_mem_base)
+ if (addr >= (void __iomem *) iop13xx_atue_mem_base &&
+ addr < (void __iomem *) (iop13xx_atue_mem_base +
+ iop13xx_atue_mem_size))
+ goto skip;
+
+ if (iop13xx_atux_mem_base)
+ if (addr >= (void __iomem *) iop13xx_atux_mem_base &&
+ addr < (void __iomem *) (iop13xx_atux_mem_base +
+ iop13xx_atux_mem_size))
+ goto skip;
+
+ switch ((u32) addr) {
+ case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
+ case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
+ case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
+ goto skip;
+ }
+ __iounmap(addr);
+
+skip:
+ return;
+}
+EXPORT_SYMBOL(__iop13xx_iounmap);
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
new file mode 100644
index 000000000000..ee595786cd22
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -0,0 +1,98 @@
+/*
+ * iq81340mc board support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/pci.h>
+#include <asm/mach/time.h>
+
+extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
+
+static int __init
+iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+ switch (idsel) {
+ case 1:
+ switch (pin) {
+ case 1: return ATUX_INTB;
+ case 2: return ATUX_INTC;
+ case 3: return ATUX_INTD;
+ case 4: return ATUX_INTA;
+ default: return -1;
+ }
+ case 2:
+ switch (pin) {
+ case 1: return ATUX_INTC;
+ case 2: return ATUX_INTD;
+ case 3: return ATUX_INTC;
+ case 4: return ATUX_INTD;
+ default: return -1;
+ }
+ default: return -1;
+ }
+}
+
+static struct hw_pci iq81340mc_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 0,
+ .setup = iop13xx_pci_setup,
+ .map_irq = iq81340mc_pcix_map_irq,
+ .scan = iop13xx_scan_bus,
+ .preinit = iop13xx_pci_init,
+};
+
+static int __init iq81340mc_pci_init(void)
+{
+ iop13xx_atu_select(&iq81340mc_pci);
+ pci_common_init(&iq81340mc_pci);
+ iop13xx_map_pci_memory();
+
+ return 0;
+}
+
+static void __init iq81340mc_init(void)
+{
+ iop13xx_platform_init();
+ iq81340mc_pci_init();
+}
+
+static void __init iq81340mc_timer_init(void)
+{
+ iop13xx_init_time(400000000);
+}
+
+static struct sys_timer iq81340mc_timer = {
+ .init = iq81340mc_timer_init,
+ .offset = iop13xx_gettimeoffset,
+};
+
+MACHINE_START(IQ81340MC, "Intel IQ81340MC")
+ /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
+ .phys_io = PHYS_IO,
+ .io_pg_offst = IO_PG_OFFSET,
+ .map_io = iop13xx_map_io,
+ .init_irq = iop13xx_init_irq,
+ .timer = &iq81340mc_timer,
+ .boot_params = BOOT_PARAM_OFFSET,
+ .init_machine = iq81340mc_init,
+MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
new file mode 100644
index 000000000000..6677e14b61bf
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -0,0 +1,100 @@
+/*
+ * iq81340sc board support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/pci.h>
+#include <asm/mach/time.h>
+
+extern int init_atu;
+
+static int __init
+iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+ WARN_ON(idsel < 1 || idsel > 2);
+
+ switch (idsel) {
+ case 1:
+ switch (pin) {
+ case 1: return ATUX_INTB;
+ case 2: return ATUX_INTC;
+ case 3: return ATUX_INTD;
+ case 4: return ATUX_INTA;
+ default: return -1;
+ }
+ case 2:
+ switch (pin) {
+ case 1: return ATUX_INTC;
+ case 2: return ATUX_INTC;
+ case 3: return ATUX_INTC;
+ case 4: return ATUX_INTC;
+ default: return -1;
+ }
+ default: return -1;
+ }
+}
+
+static struct hw_pci iq81340sc_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 0,
+ .setup = iop13xx_pci_setup,
+ .scan = iop13xx_scan_bus,
+ .map_irq = iq81340sc_atux_map_irq,
+ .preinit = iop13xx_pci_init
+};
+
+static int __init iq81340sc_pci_init(void)
+{
+ iop13xx_atu_select(&iq81340sc_pci);
+ pci_common_init(&iq81340sc_pci);
+ iop13xx_map_pci_memory();
+
+ return 0;
+}
+
+static void __init iq81340sc_init(void)
+{
+ iop13xx_platform_init();
+ iq81340sc_pci_init();
+}
+
+static void __init iq81340sc_timer_init(void)
+{
+ iop13xx_init_time(400000000);
+}
+
+static struct sys_timer iq81340sc_timer = {
+ .init = iq81340sc_timer_init,
+ .offset = iop13xx_gettimeoffset,
+};
+
+MACHINE_START(IQ81340SC, "Intel IQ81340SC")
+ /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
+ .phys_io = PHYS_IO,
+ .io_pg_offst = IO_PG_OFFSET,
+ .map_io = iop13xx_map_io,
+ .init_irq = iop13xx_init_irq,
+ .timer = &iq81340sc_timer,
+ .boot_params = BOOT_PARAM_OFFSET,
+ .init_machine = iq81340sc_init,
+MACHINE_END
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
new file mode 100644
index 000000000000..c4d9c8c5579c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -0,0 +1,286 @@
+/*
+ * iop13xx IRQ handling / support functions
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/sysctl.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/arch/irqs.h>
+
+/* INTCTL0 CP6 R0 Page 4
+ */
+static inline u32 read_intctl_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
+ return val;
+}
+static inline void write_intctl_0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
+}
+
+/* INTCTL1 CP6 R1 Page 4
+ */
+static inline u32 read_intctl_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
+ return val;
+}
+static inline void write_intctl_1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
+}
+
+/* INTCTL2 CP6 R2 Page 4
+ */
+static inline u32 read_intctl_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
+ return val;
+}
+static inline void write_intctl_2(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
+}
+
+/* INTCTL3 CP6 R3 Page 4
+ */
+static inline u32 read_intctl_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
+ return val;
+}
+static inline void write_intctl_3(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
+}
+
+/* INTSTR0 CP6 R0 Page 5
+ */
+static inline u32 read_intstr_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val));
+ return val;
+}
+static inline void write_intstr_0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
+}
+
+/* INTSTR1 CP6 R1 Page 5
+ */
+static inline u32 read_intstr_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val));
+ return val;
+}
+static void write_intstr_1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
+}
+
+/* INTSTR2 CP6 R2 Page 5
+ */
+static inline u32 read_intstr_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val));
+ return val;
+}
+static void write_intstr_2(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
+}
+
+/* INTSTR3 CP6 R3 Page 5
+ */
+static inline u32 read_intstr_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val));
+ return val;
+}
+static void write_intstr_3(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
+}
+
+/* INTBASE CP6 R0 Page 2
+ */
+static inline u32 read_intbase(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val));
+ return val;
+}
+static void write_intbase(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
+}
+
+/* INTSIZE CP6 R2 Page 2
+ */
+static inline u32 read_intsize(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val));
+ return val;
+}
+static void write_intsize(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
+}
+
+/* 0 = Interrupt Masked and 1 = Interrupt not masked */
+static void
+iop13xx_irq_mask0 (unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_0(read_intctl_0() & ~(1 << (irq - 0)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask1 (unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_1(read_intctl_1() & ~(1 << (irq - 32)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask2 (unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_2(read_intctl_2() & ~(1 << (irq - 64)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_mask3 (unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_3(read_intctl_3() & ~(1 << (irq - 96)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask0(unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_0(read_intctl_0() | (1 << (irq - 0)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask1(unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_1(read_intctl_1() | (1 << (irq - 32)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask2(unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_2(read_intctl_2() | (1 << (irq - 64)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static void
+iop13xx_irq_unmask3(unsigned int irq)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+ write_intctl_3(read_intctl_3() | (1 << (irq - 96)));
+ iop13xx_cp6_restore(cp_flags);
+}
+
+static struct irqchip iop13xx_irqchip0 = {
+ .ack = iop13xx_irq_mask0,
+ .mask = iop13xx_irq_mask0,
+ .unmask = iop13xx_irq_unmask0,
+};
+
+static struct irqchip iop13xx_irqchip1 = {
+ .ack = iop13xx_irq_mask1,
+ .mask = iop13xx_irq_mask1,
+ .unmask = iop13xx_irq_unmask1,
+};
+
+static struct irqchip iop13xx_irqchip2 = {
+ .ack = iop13xx_irq_mask2,
+ .mask = iop13xx_irq_mask2,
+ .unmask = iop13xx_irq_unmask2,
+};
+
+static struct irqchip iop13xx_irqchip3 = {
+ .ack = iop13xx_irq_mask3,
+ .mask = iop13xx_irq_mask3,
+ .unmask = iop13xx_irq_unmask3,
+};
+
+void __init iop13xx_init_irq(void)
+{
+ unsigned int i;
+
+ u32 cp_flags = iop13xx_cp6_save();
+
+ /* disable all interrupts */
+ write_intctl_0(0);
+ write_intctl_1(0);
+ write_intctl_2(0);
+ write_intctl_3(0);
+
+ /* treat all as IRQ */
+ write_intstr_0(0);
+ write_intstr_1(0);
+ write_intstr_2(0);
+ write_intstr_3(0);
+
+ /* initialize the interrupt vector generator */
+ write_intbase(INTBASE);
+ write_intsize(INTSIZE_4);
+
+ for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+ if (i < 32)
+ set_irq_chip(i, &iop13xx_irqchip0);
+ else if (i < 64)
+ set_irq_chip(i, &iop13xx_irqchip1);
+ else if (i < 96)
+ set_irq_chip(i, &iop13xx_irqchip2);
+ else
+ set_irq_chip(i, &iop13xx_irqchip3);
+
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+
+ iop13xx_cp6_restore(cp_flags);
+}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
new file mode 100644
index 000000000000..89ec70ea3187
--- /dev/null
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -0,0 +1,1113 @@
+/*
+ * iop13xx PCI support
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/pci.h>
+
+#define IOP13XX_PCI_DEBUG 0
+#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
+
+u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
+u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
+static struct pci_bus *pci_bus_atux = 0;
+static struct pci_bus *pci_bus_atue = 0;
+u32 iop13xx_atue_mem_base;
+u32 iop13xx_atux_mem_base;
+size_t iop13xx_atue_mem_size;
+size_t iop13xx_atux_mem_size;
+unsigned long iop13xx_pcibios_min_io = 0;
+unsigned long iop13xx_pcibios_min_mem = 0;
+
+EXPORT_SYMBOL(iop13xx_atue_mem_base);
+EXPORT_SYMBOL(iop13xx_atux_mem_base);
+EXPORT_SYMBOL(iop13xx_atue_mem_size);
+EXPORT_SYMBOL(iop13xx_atux_mem_size);
+
+int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
+static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
+ access */
+
+/* Scan the initialized busses and ioremap the requested memory range
+ */
+void iop13xx_map_pci_memory(void)
+{
+ int atu;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ resource_size_t end = 0;
+
+ for (atu = 0; atu < 2; atu++) {
+ bus = atu ? pci_bus_atue : pci_bus_atux;
+ if (bus) {
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int i;
+ int max = 7;
+
+ if (dev->subordinate)
+ max = DEVICE_COUNT_RESOURCE;
+
+ for (i = 0; i < max; i++) {
+ struct resource *res = &dev->resource[i];
+ if (res->flags & IORESOURCE_MEM)
+ end = max(res->end, end);
+ }
+ }
+
+ switch(atu) {
+ case 0:
+ iop13xx_atux_mem_size =
+ (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
+
+ /* 16MB align the request */
+ if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
+ iop13xx_atux_mem_size &= ~(SZ_16M - 1);
+ iop13xx_atux_mem_size += SZ_16M;
+ }
+
+ if (end) {
+ iop13xx_atux_mem_base =
+ (u32) __ioremap_pfn(
+ __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
+ , 0, iop13xx_atux_mem_size, 0);
+ if (!iop13xx_atux_mem_base) {
+ printk("%s: atux allocation "
+ "failed\n", __FUNCTION__);
+ BUG();
+ }
+ } else
+ iop13xx_atux_mem_size = 0;
+ PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+ __FUNCTION__, atu, iop13xx_atux_mem_size,
+ iop13xx_atux_mem_base);
+ break;
+ case 1:
+ iop13xx_atue_mem_size =
+ (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
+
+ /* 16MB align the request */
+ if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
+ iop13xx_atue_mem_size &= ~(SZ_16M - 1);
+ iop13xx_atue_mem_size += SZ_16M;
+ }
+
+ if (end) {
+ iop13xx_atue_mem_base =
+ (u32) __ioremap_pfn(
+ __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
+ , 0, iop13xx_atue_mem_size, 0);
+ if (!iop13xx_atue_mem_base) {
+ printk("%s: atue allocation "
+ "failed\n", __FUNCTION__);
+ BUG();
+ }
+ } else
+ iop13xx_atue_mem_size = 0;
+ PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+ __FUNCTION__, atu, iop13xx_atue_mem_size,
+ iop13xx_atue_mem_base);
+ break;
+ }
+
+ printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
+ atu ? "ATUE" : "ATUX",
+ (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
+ SZ_1M,
+ atu ? IOP13XX_PCIE_LOWER_MEM_RA :
+ IOP13XX_PCIX_LOWER_MEM_RA,
+ atu ? iop13xx_atue_mem_base :
+ iop13xx_atux_mem_base);
+ end = 0;
+ }
+
+ }
+}
+
+static inline int iop13xx_atu_function(int atu)
+{
+ int func = 0;
+ /* the function number depends on the value of the
+ * IOP13XX_INTERFACE_SEL_PCIX reset strap
+ * see C-Spec section 3.17
+ */
+ switch(atu) {
+ case IOP13XX_INIT_ATU_ATUX:
+ if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+ func = 5;
+ else
+ func = 0;
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+ if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+ func = 0;
+ else
+ func = 5;
+ break;
+ default:
+ BUG();
+ }
+
+ return func;
+}
+
+/* iop13xx_atux_cfg_address - format a configuration address for atux
+ * @bus: Target bus to access
+ * @devfn: Combined device number and function number
+ * @where: Desired register's address offset
+ *
+ * Convert the parameters to a configuration address formatted
+ * according the PCI-X 2.0 specification
+ */
+static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ u32 addr;
+
+ if (sys->busnr == bus->number)
+ addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+ else
+ addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+ addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
+ addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
+
+ return addr;
+}
+
+/* iop13xx_atue_cfg_address - format a configuration address for atue
+ * @bus: Target bus to access
+ * @devfn: Combined device number and function number
+ * @where: Desired register's address offset
+ *
+ * Convert the parameters to an address usable by the ATUE_OCCAR
+ */
+static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ u32 addr;
+
+ PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ addr = ((u32) bus->number) << IOP13XX_ATUE_OCCAR_BUS_NUM |
+ ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
+ ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
+ (where & ~0x3);
+
+ if (sys->busnr != bus->number)
+ addr |= 1; /* type 1 access */
+
+ return addr;
+}
+
+/* This routine checks the status of the last configuration cycle. If an error
+ * was detected it returns >0, else it returns a 0. The errors being checked
+ * are parity, master abort, target abort (master and target). These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop13xx_atux_pci_status(int clear)
+{
+ unsigned int status;
+ int err = 0;
+
+ /*
+ * Check the status registers.
+ */
+ status = __raw_readw(IOP13XX_ATUX_ATUSR);
+ if (status & IOP_PCI_STATUS_ERROR)
+ {
+ PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
+ if(clear)
+ __raw_writew(status & IOP_PCI_STATUS_ERROR,
+ IOP13XX_ATUX_ATUSR);
+ err = 1;
+ }
+ status = __raw_readl(IOP13XX_ATUX_ATUISR);
+ if (status & IOP13XX_ATUX_ATUISR_ERROR)
+ {
+ PRINTK("\t\t\tPCI error interrupt: ATUISR %#08x", status);
+ if(clear)
+ __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
+ IOP13XX_ATUX_ATUISR);
+ err = 1;
+ }
+ return err;
+}
+
+/* Simply write the address register and read the configuration
+ * data. Note that the data dependency on %0 encourages an abort
+ * to be detected before we return.
+ */
+static inline u32 iop13xx_atux_read(unsigned long addr)
+{
+ u32 val;
+
+ __asm__ __volatile__(
+ "str %1, [%2]\n\t"
+ "ldr %0, [%3]\n\t"
+ "mov %0, %0\n\t"
+ : "=r" (val)
+ : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
+
+ return val;
+}
+
+/* The read routines must check the error status of the last configuration
+ * cycle. If there was an error, the routine returns all hex f's.
+ */
+static int
+iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
+ u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
+
+ if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
+ __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
+ IOP13XX_XBG_BECSR);
+ val = 0xffffffff;
+ }
+
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
+ u32 val;
+
+ if (size != 4) {
+ val = iop13xx_atux_read(addr);
+ if (!iop13xx_atux_pci_status(1) == 0)
+ return PCIBIOS_SUCCESSFUL;
+
+ where = (where & 3) * 8;
+
+ if (size == 1)
+ val &= ~(0xff << where);
+ else
+ val &= ~(0xffff << where);
+
+ __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
+ } else {
+ __raw_writel(addr, IOP13XX_ATUX_OCCAR);
+ __raw_writel(value, IOP13XX_ATUX_OCCDR);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop13xx_atux_ops = {
+ .read = iop13xx_atux_read_config,
+ .write = iop13xx_atux_write_config,
+};
+
+/* This routine checks the status of the last configuration cycle. If an error
+ * was detected it returns >0, else it returns a 0. The errors being checked
+ * are parity, master abort, target abort (master and target). These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop13xx_atue_pci_status(int clear)
+{
+ unsigned int status;
+ int err = 0;
+
+ /*
+ * Check the status registers.
+ */
+
+ /* standard pci status register */
+ status = __raw_readw(IOP13XX_ATUE_ATUSR);
+ if (status & IOP_PCI_STATUS_ERROR) {
+ PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
+ if(clear)
+ __raw_writew(status & IOP_PCI_STATUS_ERROR,
+ IOP13XX_ATUE_ATUSR);
+ err++;
+ }
+
+ /* check the normal status bits in the ATUISR */
+ status = __raw_readl(IOP13XX_ATUE_ATUISR);
+ if (status & IOP13XX_ATUE_ATUISR_ERROR) {
+ PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
+ if (clear)
+ __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
+ IOP13XX_ATUE_ATUISR);
+ err++;
+
+ /* check the PCI-E status if the ATUISR reports an interface error */
+ if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
+ /* get the unmasked errors */
+ status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
+ ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
+
+ if (status) {
+ PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
+ __raw_readl(IOP13XX_ATUE_PIE_STS));
+ err++;
+ } else {
+ PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
+ __raw_readl(IOP13XX_ATUE_PIE_STS));
+ PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
+ __raw_readl(IOP13XX_ATUE_PIE_MSK));
+ BUG();
+ }
+
+ if(clear)
+ __raw_writel(status, IOP13XX_ATUE_PIE_STS);
+ }
+ }
+
+ return err;
+}
+
+static inline int __init
+iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+ WARN_ON(idsel != 0);
+
+ switch (pin) {
+ case 1: return ATUE_INTA;
+ case 2: return ATUE_INTB;
+ case 3: return ATUE_INTC;
+ case 4: return ATUE_INTD;
+ default: return -1;
+ }
+}
+
+static inline u32 iop13xx_atue_read(unsigned long addr)
+{
+ u32 val;
+
+ __raw_writel(addr, IOP13XX_ATUE_OCCAR);
+ val = __raw_readl(IOP13XX_ATUE_OCCDR);
+
+ rmb();
+
+ return val;
+}
+
+/* The read routines must check the error status of the last configuration
+ * cycle. If there was an error, the routine returns all hex f's.
+ */
+static int
+iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ u32 val;
+ unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
+
+ /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
+ if (!PCI_SLOT(devfn) || (addr & 1)) {
+ val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
+ if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
+ __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
+ IOP13XX_XBG_BECSR);
+ val = 0xffffffff;
+ }
+
+ PRINTK("addr=%#0lx, val=%#010x", addr, val);
+ } else
+ val = 0xffffffff;
+
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
+ u32 val;
+
+ if (size != 4) {
+ val = iop13xx_atue_read(addr);
+ if (!iop13xx_atue_pci_status(1) == 0)
+ return PCIBIOS_SUCCESSFUL;
+
+ where = (where & 3) * 8;
+
+ if (size == 1)
+ val &= ~(0xff << where);
+ else
+ val &= ~(0xffff << where);
+
+ __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
+ } else {
+ __raw_writel(addr, IOP13XX_ATUE_OCCAR);
+ __raw_writel(value, IOP13XX_ATUE_OCCDR);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop13xx_atue_ops = {
+ .read = iop13xx_atue_read_config,
+ .write = iop13xx_atue_write_config,
+};
+
+/* When a PCI device does not exist during config cycles, the XScale gets a
+ * bus error instead of returning 0xffffffff. We can't rely on the ATU status
+ * bits to tell us that it was indeed a configuration cycle that caused this
+ * error especially in the case when the ATUE link is down. Instead we rely
+ * on data from the south XSI bridge to validate the abort
+ */
+int
+iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ PRINTK("Data abort: address = 0x%08lx "
+ "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+ PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
+ PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
+ PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
+
+ /* If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ if (is_atue_occdr_error() || is_atux_occdr_error())
+ return 0;
+ else
+ return 1;
+}
+
+/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
+ */
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ int which_atu;
+ struct pci_bus *bus = NULL;
+
+ switch (init_atu) {
+ case IOP13XX_INIT_ATU_ATUX:
+ which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+ which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
+ break;
+ case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
+ which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
+ break;
+ default:
+ which_atu = 0;
+ }
+
+ if (!which_atu) {
+ BUG();
+ return NULL;
+ }
+
+ switch (which_atu) {
+ case IOP13XX_INIT_ATU_ATUX:
+ if (time_after_eq(jiffies + msecs_to_jiffies(1000),
+ atux_trhfa_timeout)) /* ensure not wrap */
+ while(time_before(jiffies, atux_trhfa_timeout))
+ udelay(100);
+
+ bus = pci_bus_atux = pci_scan_bus(sys->busnr,
+ &iop13xx_atux_ops,
+ sys);
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+ bus = pci_bus_atue = pci_scan_bus(sys->busnr,
+ &iop13xx_atue_ops,
+ sys);
+ break;
+ }
+
+ return bus;
+}
+
+/* This function is called from iop13xx_pci_init() after assigning valid
+ * values to iop13xx_atue_pmmr_offset. This is the location for common
+ * setup of ATUE for all IOP13XX implementations.
+ */
+void __init iop13xx_atue_setup(void)
+{
+ int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
+ u32 reg_val;
+
+ /* BAR 1 (1:1 mapping with Physical RAM) */
+ /* Set limit and enable */
+ __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
+ IOP13XX_ATUE_IALR1);
+ __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
+
+ /* Set base at the top of the reserved address space */
+ __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
+ PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
+
+ /* 1:1 mapping with physical ram
+ * (leave big endian byte swap disabled)
+ */
+ __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
+ __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
+
+ /* Outbound window 1 (PCIX/PCIE memory window) */
+ /* 32 bit Address Space */
+ __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
+ /* PA[35:32] */
+ __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
+ (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
+ IOP13XX_ATUE_OUMBAR1);
+
+ /* Setup the I/O Bar
+ * A[35-16] in 31-12
+ */
+ __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
+ IOP13XX_ATUE_OIOBAR);
+ __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
+
+ /* clear startup errors */
+ iop13xx_atue_pci_status(1);
+
+ /* OIOBAR function number
+ */
+ reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
+ reg_val &= ~0x7;
+ reg_val |= func;
+ __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
+
+ /* OUMBAR function numbers
+ */
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
+
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
+
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
+
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
+
+ /* Enable inbound and outbound cycles
+ */
+ reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
+ reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
+
+ reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
+ reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
+ IOP13XX_ATUE_ATUCR_IVM;
+ __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
+}
+
+void __init iop13xx_atue_disable(void)
+{
+ u32 reg_val;
+
+ __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
+ __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
+
+ /* wait for cycles to quiesce */
+ while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
+ IOP13XX_ATUE_PCSR_IN_Q_BUSY |
+ IOP13XX_ATUE_PCSR_LLRB_BUSY))
+ cpu_relax();
+
+ /* BAR 0 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
+ __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
+ __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
+ __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
+ __raw_writel(0x0, IOP13XX_ATUE_IALR0);
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
+ reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
+
+ /* BAR 1 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
+ __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
+ __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
+ __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
+ __raw_writel(0x0, IOP13XX_ATUE_IALR1);
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
+ reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
+
+ /* BAR 2 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
+ __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
+ __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
+ __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
+ __raw_writel(0x0, IOP13XX_ATUE_IALR2);
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
+ reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
+
+ /* BAR 3 ( Disabled ) */
+ reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
+ reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
+
+ /* Setup the I/O Bar
+ * A[35-16] in 31-12
+ */
+ __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
+ IOP13XX_ATUE_OIOBAR);
+ __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
+}
+
+/* This function is called from iop13xx_pci_init() after assigning valid
+ * values to iop13xx_atux_pmmr_offset. This is the location for common
+ * setup of ATUX for all IOP13XX implementations.
+ */
+void __init iop13xx_atux_setup(void)
+{
+ u32 reg_val;
+ int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
+
+ /* Take PCI-X bus out of reset if bootloader hasn't already.
+ * According to spec, we should wait for 2^25 PCI clocks to meet
+ * the PCI timing parameter Trhfa (RST# high to first access).
+ * This is rarely necessary and often ignored.
+ */
+ reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
+ if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
+ int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
+ msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
+ __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
+ IOP13XX_ATUX_PCSR);
+ atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
+ }
+ else
+ atux_trhfa_timeout = jiffies;
+
+ /* BAR 1 (1:1 mapping with Physical RAM) */
+ /* Set limit and enable */
+ __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
+ IOP13XX_ATUX_IALR1);
+ __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
+
+ /* Set base at the top of the reserved address space */
+ __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
+ PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
+
+ /* 1:1 mapping with physical ram
+ * (leave big endian byte swap disabled)
+ */
+ __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
+ __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
+
+ /* Outbound window 1 (PCIX/PCIE memory window) */
+ /* 32 bit Address Space */
+ __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
+ /* PA[35:32] */
+ __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
+ IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
+ IOP13XX_ATUX_OUMBAR1);
+
+ /* Setup the I/O Bar
+ * A[35-16] in 31-12
+ */
+ __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
+ IOP13XX_ATUX_OIOBAR);
+ __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
+
+ /* clear startup errors */
+ iop13xx_atux_pci_status(1);
+
+ /* OIOBAR function number
+ */
+ reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
+ reg_val &= ~0x7;
+ reg_val |= func;
+ __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
+
+ /* OUMBAR function numbers
+ */
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
+
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
+
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
+
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
+ reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
+ IOP13XX_ATU_OUMBAR_FUNC_NUM);
+ reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
+
+ /* Enable inbound and outbound cycles
+ */
+ reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
+ reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
+
+ reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
+ reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
+ __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
+}
+
+void __init iop13xx_atux_disable(void)
+{
+ u32 reg_val;
+
+ __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
+ __raw_writel(0x0, IOP13XX_ATUX_ATUCR);
+
+ /* wait for cycles to quiesce */
+ while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
+ IOP13XX_ATUX_PCSR_IN_Q_BUSY))
+ cpu_relax();
+
+ /* BAR 0 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
+ __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
+ __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
+ __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
+ __raw_writel(0x0, IOP13XX_ATUX_IALR0);
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
+ reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
+
+ /* BAR 1 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
+ __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
+ __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
+ __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
+ __raw_writel(0x0, IOP13XX_ATUX_IALR1);
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
+ reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
+
+ /* BAR 2 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
+ __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
+ __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
+ __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
+ __raw_writel(0x0, IOP13XX_ATUX_IALR2);
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
+ reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
+
+ /* BAR 3 ( Disabled ) */
+ __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
+ __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
+ __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
+ __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
+ __raw_writel(0x0, IOP13XX_ATUX_IALR3);
+ reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
+ reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
+ __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
+
+ /* Setup the I/O Bar
+ * A[35-16] in 31-12
+ */
+ __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
+ IOP13XX_ATUX_OIOBAR);
+ __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
+}
+
+void __init iop13xx_set_atu_mmr_bases(void)
+{
+ /* Based on ESSR0, determine the ATU X/E offsets */
+ switch(__raw_readl(IOP13XX_ESSR0) &
+ (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
+ /* both asserted */
+ case 0:
+ iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
+ iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+ break;
+ /* IOP13XX_CONTROLLER_ONLY = deasserted
+ * IOP13XX_INTERFACE_SEL_PCIX = asserted
+ */
+ case IOP13XX_CONTROLLER_ONLY:
+ iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
+ iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+ break;
+ /* IOP13XX_CONTROLLER_ONLY = asserted
+ * IOP13XX_INTERFACE_SEL_PCIX = deasserted
+ */
+ case IOP13XX_INTERFACE_SEL_PCIX:
+ iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
+ iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+ break;
+ /* both deasserted */
+ case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
+ iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
+ iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __init iop13xx_atu_select(struct hw_pci *plat_pci)
+{
+ int i;
+
+ /* set system defaults
+ * note: if "iop13xx_init_atu=" is specified this autodetect
+ * sequence will be bypassed
+ */
+ if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
+ /* check for single/dual interface */
+ if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
+ /* ATUE must be present check the device id
+ * to see if ATUX is present.
+ */
+ init_atu |= IOP13XX_INIT_ATU_ATUE;
+ switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
+ case 0x70:
+ case 0x80:
+ case 0xc0:
+ init_atu |= IOP13XX_INIT_ATU_ATUX;
+ break;
+ }
+ } else {
+ /* ATUX must be present check the device id
+ * to see if ATUE is present.
+ */
+ init_atu |= IOP13XX_INIT_ATU_ATUX;
+ switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
+ case 0x70:
+ case 0x80:
+ case 0xc0:
+ init_atu |= IOP13XX_INIT_ATU_ATUE;
+ break;
+ }
+ }
+
+ /* check central resource and root complex capability */
+ if (init_atu & IOP13XX_INIT_ATU_ATUX)
+ if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
+ IOP13XX_ATUX_PCSR_CENTRAL_RES))
+ init_atu &= ~IOP13XX_INIT_ATU_ATUX;
+
+ if (init_atu & IOP13XX_INIT_ATU_ATUE)
+ if (__raw_readl(IOP13XX_ATUE_PCSR) &
+ IOP13XX_ATUE_PCSR_END_POINT)
+ init_atu &= ~IOP13XX_INIT_ATU_ATUE;
+ }
+
+ for (i = 0; i < 2; i++) {
+ if((init_atu & (1 << i)) == (1 << i))
+ plat_pci->nr_controllers++;
+ }
+}
+
+void __init iop13xx_pci_init(void)
+{
+ /* clear pre-existing south bridge errors */
+ __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
+
+ /* Setup the Min Address for PCI memory... */
+ iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
+
+ /* if Linux is given control of an ATU
+ * clear out its prior configuration,
+ * otherwise do not touch the registers
+ */
+ if (init_atu & IOP13XX_INIT_ATU_ATUE) {
+ iop13xx_atue_disable();
+ iop13xx_atue_setup();
+ }
+
+ if (init_atu & IOP13XX_INIT_ATU_ATUX) {
+ iop13xx_atux_disable();
+ iop13xx_atux_setup();
+ }
+
+ hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
+ "imprecise external abort");
+}
+
+/* intialize the pci memory space. handle any combination of
+ * atue and atux enabled/disabled
+ */
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ struct resource *res;
+ int which_atu;
+ u32 pcixsr, pcsr;
+
+ if (nr > 1)
+ return 0;
+
+ res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("PCI: unable to alloc resources");
+
+ memset(res, 0, sizeof(struct resource) * 2);
+
+ /* 'nr' assumptions:
+ * ATUX is always 0
+ * ATUE is 1 when ATUX is also enabled
+ * ATUE is 0 when ATUX is disabled
+ */
+ switch(init_atu) {
+ case IOP13XX_INIT_ATU_ATUX:
+ which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+ which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
+ break;
+ case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
+ which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
+ break;
+ default:
+ which_atu = 0;
+ }
+
+ if (!which_atu)
+ return 0;
+
+ switch(which_atu) {
+ case IOP13XX_INIT_ATU_ATUX:
+ pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
+ pcixsr &= ~0xffff;
+ pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
+ 0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
+ iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
+ << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
+ __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
+
+ res[0].start = IOP13XX_PCIX_LOWER_IO_PA;
+ res[0].end = IOP13XX_PCIX_UPPER_IO_PA;
+ res[0].name = "IQ81340 ATUX PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+
+ res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
+ res[1].end = IOP13XX_PCIX_UPPER_MEM_RA;
+ res[1].name = "IQ81340 ATUX PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
+ sys->io_offset = IOP13XX_PCIX_IO_OFFSET;
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+ /* Note: the function number field in the PCSR is ro */
+ pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
+ pcsr &= ~(0xfff8 << 16);
+ pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
+ 0 << IOP13XX_ATUE_PCSR_DEV_NUM;
+
+ __raw_writel(pcsr, IOP13XX_ATUE_PCSR);
+
+ res[0].start = IOP13XX_PCIE_LOWER_IO_PA;
+ res[0].end = IOP13XX_PCIE_UPPER_IO_PA;
+ res[0].name = "IQ81340 ATUE PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+
+ res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
+ res[1].end = IOP13XX_PCIE_UPPER_MEM_RA;
+ res[1].name = "IQ81340 ATUE PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
+ sys->io_offset = IOP13XX_PCIE_IO_OFFSET;
+ sys->map_irq = iop13xx_pcie_map_irq;
+ break;
+ default:
+ return 0;
+ }
+
+ request_resource(&ioport_resource, &res[0]);
+ request_resource(&iomem_resource, &res[1]);
+
+ sys->resource[0] = &res[0];
+ sys->resource[1] = &res[1];
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+u16 iop13xx_dev_id(void)
+{
+ if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+ return __raw_readw(IOP13XX_ATUE_DID);
+ else
+ return __raw_readw(IOP13XX_ATUX_DID);
+}
+
+static int __init iop13xx_init_atu_setup(char *str)
+{
+ init_atu = IOP13XX_INIT_ATU_NONE;
+ if (str) {
+ while (*str != '\0') {
+ switch (*str) {
+ case 'x':
+ case 'X':
+ init_atu |= IOP13XX_INIT_ATU_ATUX;
+ init_atu &= ~IOP13XX_INIT_ATU_NONE;
+ break;
+ case 'e':
+ case 'E':
+ init_atu |= IOP13XX_INIT_ATU_ATUE;
+ init_atu &= ~IOP13XX_INIT_ATU_NONE;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_atu\" malformed at "
+ "character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_atu = IOP13XX_INIT_ATU_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+__setup("iop13xx_init_atu", iop13xx_init_atu_setup);
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
new file mode 100644
index 000000000000..3756d2ccb1a7
--- /dev/null
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -0,0 +1,406 @@
+/*
+ * iop13xx platform Initialization
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/serial_8250.h>
+#ifdef CONFIG_MTD_PHYSMAP
+#include <linux/mtd/physmap.h>
+#endif
+#include <asm/mach/map.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#define IOP13XX_UART_XTAL 33334000
+#define IOP13XX_SETUP_DEBUG 0
+#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
+
+/* Standard IO mapping for all IOP13XX based systems
+ */
+static struct map_desc iop13xx_std_desc[] __initdata = {
+ { /* mem mapped registers */
+ .virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
+ .length = IOP13XX_PMMR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCIE IO space */
+ .virtual = IOP13XX_PCIE_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
+ .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCIX IO space */
+ .virtual = IOP13XX_PCIX_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
+ .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct resource iop13xx_uart0_resources[] = {
+ [0] = {
+ .start = IOP13XX_UART0_PHYS,
+ .end = IOP13XX_UART0_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_UART0,
+ .end = IRQ_IOP13XX_UART0,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_uart1_resources[] = {
+ [0] = {
+ .start = IOP13XX_UART1_PHYS,
+ .end = IOP13XX_UART1_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_UART1,
+ .end = IRQ_IOP13XX_UART1,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct plat_serial8250_port iop13xx_uart0_data[] = {
+ {
+ .membase = (char*)(IOP13XX_UART0_VIRT),
+ .mapbase = (IOP13XX_UART0_PHYS),
+ .irq = IRQ_IOP13XX_UART0,
+ .uartclk = IOP13XX_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+static struct plat_serial8250_port iop13xx_uart1_data[] = {
+ {
+ .membase = (char*)(IOP13XX_UART1_VIRT),
+ .mapbase = (IOP13XX_UART1_PHYS),
+ .irq = IRQ_IOP13XX_UART1,
+ .uartclk = IOP13XX_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = iop13xx_uart0_data,
+ .num_resources = 2,
+ .resource = iop13xx_uart0_resources,
+};
+
+static struct platform_device iop13xx_uart1 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = iop13xx_uart1_data,
+ .num_resources = 2,
+ .resource = iop13xx_uart1_resources
+};
+
+static struct resource iop13xx_i2c_0_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C0_PHYS,
+ .end = IOP13XX_I2C0_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_0,
+ .end = IRQ_IOP13XX_I2C_0,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_i2c_1_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C1_PHYS,
+ .end = IOP13XX_I2C1_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_1,
+ .end = IRQ_IOP13XX_I2C_1,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_i2c_2_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C2_PHYS,
+ .end = IOP13XX_I2C2_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_2,
+ .end = IRQ_IOP13XX_I2C_2,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
+ * we just use the same device name.
+ */
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_i2c_0_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_0_resources
+};
+
+static struct platform_device iop13xx_i2c_1_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_1_resources
+};
+
+static struct platform_device iop13xx_i2c_2_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_2_resources
+};
+
+#ifdef CONFIG_MTD_PHYSMAP
+/* PBI Flash Device
+ */
+static struct physmap_flash_data iq8134x_flash_data = {
+ .width = 2,
+};
+
+static struct resource iq8134x_flash_resource = {
+ .start = IQ81340_FLASHBASE,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq8134x_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &iq8134x_flash_data, },
+ .num_resources = 1,
+ .resource = &iq8134x_flash_resource,
+};
+
+static unsigned long iq8134x_probe_flash_size(void)
+{
+ uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
+ int i;
+ char query[3];
+ unsigned long size = 0;
+ int width = iq8134x_flash_data.width;
+
+ if (flash_addr) {
+ /* send CFI 'query' command */
+ writew(0x98, flash_addr);
+
+ /* check for CFI compliance */
+ for (i = 0; i < 3 * width; i += width)
+ query[i / width] = readb(flash_addr + (0x10 * width) + i);
+
+ /* read the size */
+ if (memcmp(query, "QRY", 3) == 0)
+ size = 1 << readb(flash_addr + (0x27 * width));
+
+ /* send CFI 'read array' command */
+ writew(0xff, flash_addr);
+
+ iounmap(flash_addr);
+ }
+
+ return size;
+}
+#endif
+
+void __init iop13xx_map_io(void)
+{
+ /* Initialize the Static Page Table maps */
+ iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
+}
+
+static int init_uart = 0;
+static int init_i2c = 0;
+
+void __init iop13xx_platform_init(void)
+{
+ int i;
+ u32 uart_idx, i2c_idx, plat_idx;
+ struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
+
+ /* set the bases so we can read the device id */
+ iop13xx_set_atu_mmr_bases();
+
+ memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
+
+ if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
+ switch (iop13xx_dev_id()) {
+ /* enable both uarts on iop341 and iop342 */
+ case 0x3380:
+ case 0x3384:
+ case 0x3388:
+ case 0x338c:
+ case 0x3382:
+ case 0x3386:
+ case 0x338a:
+ case 0x338e:
+ init_uart |= IOP13XX_INIT_UART_0;
+ init_uart |= IOP13XX_INIT_UART_1;
+ break;
+ /* only enable uart 1 */
+ default:
+ init_uart |= IOP13XX_INIT_UART_1;
+ }
+ }
+
+ if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
+ switch (iop13xx_dev_id()) {
+ /* enable all i2c units on iop341 and iop342 */
+ case 0x3380:
+ case 0x3384:
+ case 0x3388:
+ case 0x338c:
+ case 0x3382:
+ case 0x3386:
+ case 0x338a:
+ case 0x338e:
+ init_i2c |= IOP13XX_INIT_I2C_0;
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ break;
+ /* only enable i2c 1 and 2 */
+ default:
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ }
+ }
+
+ plat_idx = 0;
+ uart_idx = 0;
+ i2c_idx = 0;
+
+ /* uart 1 (if enabled) is ttyS0 */
+ if (init_uart & IOP13XX_INIT_UART_1) {
+ PRINTK("Adding uart1 to platform device list\n");
+ iop13xx_uart1.id = uart_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_uart1;
+ }
+ if (init_uart & IOP13XX_INIT_UART_0) {
+ PRINTK("Adding uart0 to platform device list\n");
+ iop13xx_uart0.id = uart_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_uart0;
+ }
+
+ for(i = 0; i < IQ81340_NUM_I2C; i++) {
+ if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
+ printk("Adding i2c%d to platform device list\n", i);
+ switch(init_i2c & (1 << i)) {
+ case IOP13XX_INIT_I2C_0:
+ iop13xx_i2c_0_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_0_controller;
+ break;
+ case IOP13XX_INIT_I2C_1:
+ iop13xx_i2c_1_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_1_controller;
+ break;
+ case IOP13XX_INIT_I2C_2:
+ iop13xx_i2c_2_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_2_controller;
+ break;
+ }
+ }
+
+#ifdef CONFIG_MTD_PHYSMAP
+ iq8134x_flash_resource.end = iq8134x_flash_resource.start +
+ iq8134x_probe_flash_size();
+ if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
+ iop13xx_devices[plat_idx++] = &iq8134x_flash;
+ else
+ printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
+#endif
+
+ platform_add_devices(iop13xx_devices, plat_idx);
+}
+
+static int __init iop13xx_init_uart_setup(char *str)
+{
+ if (str) {
+ while (*str != '\0') {
+ switch(*str) {
+ case '0':
+ init_uart |= IOP13XX_INIT_UART_0;
+ break;
+ case '1':
+ init_uart |= IOP13XX_INIT_UART_1;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_uart\" malformed"
+ " at character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_uart = IOP13XX_INIT_UART_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+static int __init iop13xx_init_i2c_setup(char *str)
+{
+ if (str) {
+ while (*str != '\0') {
+ switch(*str) {
+ case '0':
+ init_i2c |= IOP13XX_INIT_I2C_0;
+ break;
+ case '1':
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ break;
+ case '2':
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_i2c\" malformed"
+ " at character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_i2c = IOP13XX_INIT_I2C_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
+__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
diff --git a/arch/arm/mach-iop13xx/time.c b/arch/arm/mach-iop13xx/time.c
new file mode 100644
index 000000000000..8b21365f653f
--- /dev/null
+++ b/arch/arm/mach-iop13xx/time.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-iop13xx/time.c
+ *
+ * Timer code for IOP13xx (copied from IOP32x/IOP33x implementation)
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+static unsigned long ticks_per_jiffy;
+static unsigned long ticks_per_usec;
+static unsigned long next_jiffy_time;
+
+static inline u32 read_tcr1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
+ return val;
+}
+
+unsigned long iop13xx_gettimeoffset(void)
+{
+ unsigned long offset;
+ u32 cp_flags;
+
+ cp_flags = iop13xx_cp6_save();
+ offset = next_jiffy_time - read_tcr1();
+ iop13xx_cp6_restore(cp_flags);
+
+ return offset / ticks_per_usec;
+}
+
+static irqreturn_t
+iop13xx_timer_interrupt(int irq, void *dev_id)
+{
+ u32 cp_flags = iop13xx_cp6_save();
+
+ write_seqlock(&xtime_lock);
+
+ asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (1));
+
+ while ((signed long)(next_jiffy_time - read_tcr1())
+ >= ticks_per_jiffy) {
+ timer_tick();
+ next_jiffy_time -= ticks_per_jiffy;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ iop13xx_cp6_restore(cp_flags);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction iop13xx_timer_irq = {
+ .name = "IOP13XX Timer Tick",
+ .handler = iop13xx_timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+};
+
+void __init iop13xx_init_time(unsigned long tick_rate)
+{
+ u32 timer_ctl;
+ u32 cp_flags;
+
+ ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+ ticks_per_usec = tick_rate / 1000000;
+ next_jiffy_time = 0xffffffff;
+
+ timer_ctl = IOP13XX_TMR_EN | IOP13XX_TMR_PRIVILEGED |
+ IOP13XX_TMR_RELOAD | IOP13XX_TMR_RATIO_1_1;
+
+ /*
+ * We use timer 0 for our timer interrupt, and timer 1 as
+ * monotonic counter for tracking missed jiffies.
+ */
+ cp_flags = iop13xx_cp6_save();
+ asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (ticks_per_jiffy - 1));
+ asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (timer_ctl));
+ asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (0xffffffff));
+ asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (timer_ctl));
+ iop13xx_cp6_restore(cp_flags);
+
+ setup_irq(IRQ_IOP13XX_TIMER0, &iop13xx_timer_irq);
+}
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 69d6302f40cf..3ec1cd5c4f99 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -70,7 +70,7 @@ void __init iop32x_init_irq(void)
for (i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, &ext_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 63304b3d0d76..00b37f32d72e 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -121,7 +121,7 @@ void __init iop33x_init_irq(void)
for (i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 22c98e9dad28..27b7480f4afe 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -308,7 +308,7 @@ EXPORT_SYMBOL(gpio_line_config);
/*************************************************************************
* IRQ handling IXP2000
*************************************************************************/
-static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int i;
unsigned long status = *IXP2000_GPIO_INST;
@@ -373,7 +373,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq)
ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
-static struct irqchip ixp2000_GPIO_irq_chip = {
+static struct irq_chip ixp2000_GPIO_irq_chip = {
.ack = ixp2000_GPIO_irq_mask_ack,
.mask = ixp2000_GPIO_irq_mask,
.unmask = ixp2000_GPIO_irq_unmask,
@@ -401,7 +401,7 @@ static void ixp2000_pci_irq_unmask(unsigned int irq)
/*
* Error interrupts. These are used extensively by the microengine drivers
*/
-static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int i;
unsigned long status = *IXP2000_IRQ_ERR_STATUS;
@@ -426,13 +426,13 @@ static void ixp2000_err_irq_unmask(unsigned int irq)
(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
}
-static struct irqchip ixp2000_err_irq_chip = {
+static struct irq_chip ixp2000_err_irq_chip = {
.ack = ixp2000_err_irq_mask,
.mask = ixp2000_err_irq_mask,
.unmask = ixp2000_err_irq_unmask
};
-static struct irqchip ixp2000_pci_irq_chip = {
+static struct irq_chip ixp2000_pci_irq_chip = {
.ack = ixp2000_pci_irq_mask,
.mask = ixp2000_pci_irq_mask,
.unmask = ixp2000_pci_irq_unmask
@@ -448,7 +448,7 @@ static void ixp2000_irq_unmask(unsigned int irq)
ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
}
-static struct irqchip ixp2000_irq_chip = {
+static struct irq_chip ixp2000_irq_chip = {
.ack = ixp2000_irq_mask,
.mask = ixp2000_irq_mask,
.unmask = ixp2000_irq_unmask
@@ -484,7 +484,7 @@ void __init ixp2000_init_irq(void)
for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
set_irq_chip(irq, &ixp2000_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
} else set_irq_flags(irq, 0);
}
@@ -493,7 +493,7 @@ void __init ixp2000_init_irq(void)
if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
IXP2000_VALID_ERR_IRQ_MASK) {
set_irq_chip(irq, &ixp2000_err_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
else
@@ -503,7 +503,7 @@ void __init ixp2000_init_irq(void)
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
@@ -516,7 +516,7 @@ void __init ixp2000_init_irq(void)
ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
set_irq_chip(irq, &ixp2000_pci_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index aa2655092d2d..52b368b34346 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -106,7 +106,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq)
ixp2000_release_slowport(&old_cfg);
}
-static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
{
volatile u32 ex_interrupt = 0;
static struct slowport_cfg old_cfg;
@@ -129,7 +129,7 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc)
for(i = 0; i < board_irq_count; i++) {
if(ex_interrupt & (1 << i)) {
- struct irqdesc *cpld_desc;
+ struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
cpld_desc = irq_desc + cpld_irq;
desc_handle_irq(cpld_irq, cpld_desc);
@@ -139,7 +139,7 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc)
desc->chip->unmask(irq);
}
-static struct irqchip ixdp2x00_cpld_irq_chip = {
+static struct irq_chip ixdp2x00_cpld_irq_chip = {
.ack = ixdp2x00_irq_mask,
.mask = ixdp2x00_irq_mask,
.unmask = ixdp2x00_irq_unmask
@@ -162,7 +162,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long
for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
set_irq_chip(irq, &ixdp2x00_cpld_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 9ccae9e63f70..3084a5fa751c 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -63,7 +63,7 @@ static void ixdp2x01_irq_unmask(unsigned int irq)
static u32 valid_irq_mask;
-static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
{
u32 ex_interrupt;
int i;
@@ -79,7 +79,7 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc)
for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
if (ex_interrupt & (1 << i)) {
- struct irqdesc *cpld_desc;
+ struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
cpld_desc = irq_desc + cpld_irq;
desc_handle_irq(cpld_irq, cpld_desc);
@@ -89,7 +89,7 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc)
desc->chip->unmask(irq);
}
-static struct irqchip ixdp2x01_irq_chip = {
+static struct irq_chip ixdp2x01_irq_chip = {
.mask = ixdp2x01_irq_mask,
.ack = ixdp2x01_irq_mask,
.unmask = ixdp2x01_irq_unmask
@@ -119,7 +119,7 @@ void __init ixdp2x01_init_irq(void)
for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
if (irq & valid_irq_mask) {
set_irq_chip(irq, &ixdp2x01_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
} else {
set_irq_flags(irq, 0);
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index d4bf1e1c0031..5a09a90c08fb 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -32,7 +32,7 @@
#include <asm/mach/pci.h>
-static int pci_master_aborts = 0;
+static volatile int pci_master_aborts = 0;
static int clear_master_aborts(void);
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index a704a1820048..ce6ad635a00c 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -224,14 +224,14 @@ static void ixp23xx_irq_edge_unmask(unsigned int irq)
*intr_reg |= (1 << (irq % 32));
}
-static struct irqchip ixp23xx_irq_level_chip = {
+static struct irq_chip ixp23xx_irq_level_chip = {
.ack = ixp23xx_irq_mask,
.mask = ixp23xx_irq_mask,
.unmask = ixp23xx_irq_level_unmask,
.set_type = ixp23xx_irq_set_type
};
-static struct irqchip ixp23xx_irq_edge_chip = {
+static struct irq_chip ixp23xx_irq_edge_chip = {
.ack = ixp23xx_irq_ack,
.mask = ixp23xx_irq_mask,
.unmask = ixp23xx_irq_edge_unmask,
@@ -251,11 +251,11 @@ static void ixp23xx_pci_irq_unmask(unsigned int irq)
/*
* TODO: Should this just be done at ASM level?
*/
-static void pci_handler(unsigned int irq, struct irqdesc *desc)
+static void pci_handler(unsigned int irq, struct irq_desc *desc)
{
u32 pci_interrupt;
unsigned int irqno;
- struct irqdesc *int_desc;
+ struct irq_desc *int_desc;
pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
@@ -276,7 +276,7 @@ static void pci_handler(unsigned int irq, struct irqdesc *desc)
desc->chip->unmask(irq);
}
-static struct irqchip ixp23xx_pci_irq_chip = {
+static struct irq_chip ixp23xx_pci_irq_chip = {
.ack = ixp23xx_pci_irq_mask,
.mask = ixp23xx_pci_irq_mask,
.unmask = ixp23xx_pci_irq_unmask
@@ -287,11 +287,11 @@ static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
switch (type) {
case IXP23XX_IRQ_LEVEL:
set_irq_chip(irq, &ixp23xx_irq_level_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
break;
case IXP23XX_IRQ_EDGE:
set_irq_chip(irq, &ixp23xx_irq_edge_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
break;
}
set_irq_flags(irq, IRQF_VALID);
@@ -322,7 +322,7 @@ void __init ixp23xx_init_irq(void)
for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
set_irq_chip(irq, &ixp23xx_pci_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b6ab0e8bb5e8..7a86a2516eaa 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -60,7 +60,7 @@ static void ixdp2351_inta_unmask(unsigned int irq)
*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
}
-static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc)
+static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
{
u16 ex_interrupt =
*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
@@ -70,7 +70,7 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc)
for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irqdesc *cpld_desc;
+ struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
cpld_desc = irq_desc + cpld_irq;
@@ -81,7 +81,7 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc)
desc->chip->unmask(irq);
}
-static struct irqchip ixdp2351_inta_chip = {
+static struct irq_chip ixdp2351_inta_chip = {
.ack = ixdp2351_inta_mask,
.mask = ixdp2351_inta_mask,
.unmask = ixdp2351_inta_unmask
@@ -97,7 +97,7 @@ static void ixdp2351_intb_unmask(unsigned int irq)
*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
}
-static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc)
+static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
{
u16 ex_interrupt =
*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
@@ -107,7 +107,7 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc)
for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irqdesc *cpld_desc;
+ struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
cpld_desc = irq_desc + cpld_irq;
@@ -118,7 +118,7 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc)
desc->chip->unmask(irq);
}
-static struct irqchip ixdp2351_intb_chip = {
+static struct irq_chip ixdp2351_intb_chip = {
.ack = ixdp2351_intb_mask,
.mask = ixdp2351_intb_mask,
.unmask = ixdp2351_intb_unmask
@@ -142,7 +142,7 @@ void ixdp2351_init_irq(void)
irq++) {
if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
set_irq_flags(irq, IRQF_VALID);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_chip(irq, &ixdp2351_inta_chip);
}
}
@@ -153,7 +153,7 @@ void ixdp2351_init_irq(void)
irq++) {
if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
set_irq_flags(irq, IRQF_VALID);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_chip(irq, &ixdp2351_intb_chip);
}
}
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 3b34fa35e36b..ac7d43d23c28 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -36,7 +36,7 @@
extern int (*external_fault) (unsigned long, struct pt_regs *);
-static int pci_master_aborts = 0;
+static volatile int pci_master_aborts = 0;
#ifdef DEBUG
#define DBG(x...) printk(x)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index fbe288a8da65..2ec9a9e9a04d 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -28,6 +28,7 @@
#include <linux/timex.h>
#include <linux/clocksource.h>
+#include <asm/arch/udc.h>
#include <asm/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -39,6 +40,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+static int __init ixp4xx_clocksource_init(void);
+
/*************************************************************************
* IXP4xx chipset I/O mapping
*************************************************************************/
@@ -195,7 +198,7 @@ static void ixp4xx_irq_unmask(unsigned int irq)
*IXP4XX_ICMR |= (1 << irq);
}
-static struct irqchip ixp4xx_irq_chip = {
+static struct irq_chip ixp4xx_irq_chip = {
.name = "IXP4xx",
.ack = ixp4xx_irq_ack,
.mask = ixp4xx_irq_mask,
@@ -224,7 +227,7 @@ void __init ixp4xx_init_irq(void)
/* Default to all level triggered */
for(i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, &ixp4xx_irq_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
@@ -280,12 +283,52 @@ static void __init ixp4xx_timer_init(void)
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
+
+ ixp4xx_clocksource_init();
}
struct sys_timer ixp4xx_timer = {
.init = ixp4xx_timer_init,
};
+static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
+
+void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+ memcpy(&ixp4xx_udc_info, info, sizeof *info);
+}
+
+static struct resource ixp4xx_udc_resources[] = {
+ [0] = {
+ .start = 0xc800b000,
+ .end = 0xc800bfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IXP4XX_USB,
+ .end = IRQ_IXP4XX_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * USB device controller. The IXP4xx uses the same controller as PXA2XX,
+ * so we just use the same device.
+ */
+static struct platform_device ixp4xx_udc_device = {
+ .name = "pxa2xx-udc",
+ .id = -1,
+ .num_resources = 2,
+ .resource = ixp4xx_udc_resources,
+ .dev = {
+ .platform_data = &ixp4xx_udc_info,
+ },
+};
+
+static struct platform_device *ixp4xx_devices[] __initdata = {
+ &ixp4xx_udc_device,
+};
+
static struct resource ixp46x_i2c_resources[] = {
[0] = {
.start = 0xc8011000,
@@ -321,6 +364,8 @@ void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
+ platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
+
if (cpu_is_ixp46x()) {
int region;
@@ -363,5 +408,3 @@ static int __init ixp4xx_clocksource_init(void)
return 0;
}
-
-device_initcall(ixp4xx_clocksource_init);
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index b7af5640ea7b..561a0fe7095d 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -55,7 +55,7 @@ static void l7200_unmask_irq(unsigned int irq)
IRQ_ENABLE = 1 << irq;
}
-static struct irqchip l7200_irq_chip = {
+static struct irq_chip l7200_irq_chip = {
.ack = l7200_mask_irq,
.mask = l7200_mask_irq,
.unmask = l7200_unmask_irq
@@ -71,7 +71,7 @@ static void __init l7200_init_irq(void)
for (irq = 0; irq < NR_IRQS; irq++) {
set_irq_chip(irq, &l7200_irq_chip);
set_irq_flags(irq, IRQF_VALID);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
}
init_FIQ();
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 15fbcc911fe7..6d26661d99f6 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -71,7 +71,7 @@ static struct irq_chip kev7a400_cpld_chip = {
};
-static void kev7a400_cpld_handler (unsigned int irq, struct irqdesc *desc)
+static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
u32 mask = CPLD_LATCHED_INTS;
irq = IRQ_KEV7A400_CPLD;
@@ -88,7 +88,7 @@ void __init lh7a40x_init_board_irq (void)
for (irq = IRQ_KEV7A400_CPLD;
irq < IRQ_KEV7A400_CPLD + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &kev7a400_cpld_chip);
- set_irq_handler (irq, do_edge_IRQ);
+ set_irq_handler (irq, handle_edge_irq);
set_irq_flags (irq, IRQF_VALID);
}
set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 8441e0a156cb..fe64946f9e18 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -207,7 +207,7 @@ static struct irq_chip lpd7a40x_cpld_chip = {
.unmask = lh7a40x_unmask_cpld_irq,
};
-static void lpd7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc)
+static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
unsigned int mask = CPLD_INTERRUPTS;
@@ -279,7 +279,7 @@ void __init lh7a40x_init_board_irq (void)
for (irq = IRQ_BOARD_START;
irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &lpd7a40x_cpld_chip);
- set_irq_handler (irq, do_level_IRQ);
+ set_irq_handler (irq, handle_level_irq);
set_irq_flags (irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
index 646071334b8f..c7433b3c5812 100644
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c
@@ -51,7 +51,7 @@ irq_chip lh7a400_cpld_chip = {
};
static void
-lh7a400_cpld_handler (unsigned int irq, struct irqdesc *desc)
+lh7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
u32 mask = CPLD_LATCHED_INTS;
irq = IRQ_KEV_7A400_CPLD;
@@ -71,7 +71,7 @@ lh7a400_init_board_irq (void)
for (irq = IRQ_KEV7A400_CPLD;
irq < IRQ_KEV7A400_CPLD + NR_IRQ_KEV7A400_CPLD; ++irq) {
set_irq_chip (irq, &lh7a400_cpld_chip);
- set_irq_handler (irq, do_edge_IRQ);
+ set_irq_handler (irq, handle_edge_irq);
set_irq_flags (irq, IRQF_VALID);
}
set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 091b2dc58d25..0b938e8b4d98 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -74,11 +74,11 @@ void __init lh7a400_init_irq (void)
case IRQ_GPIO6INTR:
case IRQ_GPIO7INTR:
set_irq_chip (irq, &lh7a400_gpio_chip);
- set_irq_handler (irq, do_level_IRQ); /* OK default */
+ set_irq_handler (irq, handle_level_irq); /* OK default */
break;
default:
set_irq_chip (irq, &lh7a400_internal_chip);
- set_irq_handler (irq, do_level_IRQ);
+ set_irq_handler (irq, handle_level_irq);
}
set_irq_flags (irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 7059b983724f..5760f8c53e89 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -161,13 +161,13 @@ void __init lh7a404_init_irq (void)
set_irq_chip (irq, irq < 32
? &lh7a404_gpio_vic1_chip
: &lh7a404_gpio_vic2_chip);
- set_irq_handler (irq, do_level_IRQ); /* OK default */
+ set_irq_handler (irq, handle_level_irq); /* OK default */
break;
default:
set_irq_chip (irq, irq < 32
? &lh7a404_vic1_chip
: &lh7a404_vic2_chip);
- set_irq_handler (irq, do_level_IRQ);
+ set_irq_handler (irq, handle_level_irq);
}
set_irq_flags (irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index b20376804bbb..15b9577023c9 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -57,7 +57,7 @@ static struct irq_chip lh7a40x_cpld_chip = {
.unmask = lh7a40x_unmask_cpld_irq,
};
-static void lh7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc)
+static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
unsigned int mask = CPLD_INTERRUPTS;
@@ -118,7 +118,7 @@ void __init lh7a40x_init_board_irq (void)
for (irq = IRQ_BOARD_START;
irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &lh7a40x_cpld_chip);
- set_irq_handler (irq, do_edge_IRQ);
+ set_irq_handler (irq, handle_edge_irq);
set_irq_flags (irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index edbbbdc3b06b..b9ca8f98265d 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -69,7 +69,7 @@ static struct platform_device *devices[] __initdata = {
#endif
static void
-netx_hif_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
+netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
{
unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
unsigned int stat;
@@ -160,7 +160,7 @@ netx_hif_unmask_irq(unsigned int _irq)
DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
}
-static struct irqchip netx_hif_chip = {
+static struct irq_chip netx_hif_chip = {
.ack = netx_hif_ack_irq,
.mask = netx_hif_mask_irq,
.unmask = netx_hif_unmask_irq,
@@ -175,7 +175,7 @@ void __init netx_init_irq(void)
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
set_irq_chip(irq, &netx_hif_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 8e40208b10bb..30e188109046 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -84,9 +84,9 @@ static void fpga_mask_ack_irq(unsigned int irq)
fpga_ack_irq(irq);
}
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc)
+void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
{
- struct irqdesc *d;
+ struct irq_desc *d;
u32 stat;
int fpga_irq;
@@ -168,7 +168,7 @@ void omap1510_fpga_init_irq(void)
set_irq_chip(i, &omap_fpga_irq);
}
- set_irq_handler(i, do_edge_IRQ);
+ set_irq_handler(i, handle_edge_irq);
set_irq_flags(i, IRQF_VALID);
}
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 3ea140bb9eba..6383a12ad970 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -229,7 +229,7 @@ void __init omap_init_irq(void)
omap_irq_set_cfg(j, 0, 0, irq_trigger);
set_irq_chip(j, &omap_irq_chip);
- set_irq_handler(j, do_level_IRQ);
+ set_irq_handler(j, handle_level_irq);
set_irq_flags(j, IRQF_VALID);
}
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 11870093d7a1..a39d30680300 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -130,7 +130,7 @@ void __init omap_init_irq(void)
for (i = 0; i < nr_irqs; i++) {
set_irq_chip(i, &omap_irq_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 3a4bcf3d91fa..968d0b027597 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -59,22 +59,22 @@ static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
case IRQT_RISING:
__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
break;
case IRQT_FALLING:
__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
break;
case IRQT_LOW:
__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
break;
case IRQT_HIGH:
__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
break;
/* IRQT_BOTHEDGE is not supported */
@@ -85,7 +85,7 @@ static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
return 0;
}
-static struct irqchip pnx4008_irq_chip = {
+static struct irq_chip pnx4008_irq_chip = {
.ack = pnx4008_mask_ack_irq,
.mask = pnx4008_mask_irq,
.unmask = pnx4008_unmask_irq,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 03d07cae26c8..9e3d0bdcba07 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -13,12 +13,10 @@ config ARCH_LUBBOCK
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
- select IWMMXT
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
- select IWMMXT
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
@@ -53,7 +51,6 @@ config PXA_SHARPSL_25x
config PXA_SHARPSL_27x
bool "Sharp PXA270 models (SL-Cxx00)"
select PXA27x
- select IWMMXT
endchoice
@@ -129,11 +126,6 @@ config PXA27x
help
Select code specific to PXA27x variants
-config IWMMXT
- bool
- help
- Enable support for iWMMXt
-
config PXA_SHARP_C7xx
bool
select PXA_SSP
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 45fb2c3bcf82..6ae605857ca9 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -25,6 +25,10 @@
#include <linux/pm.h>
#include <linux/string.h>
+#include <linux/sched.h>
+#include <asm/cnt32_to_63.h>
+#include <asm/div64.h>
+
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -41,6 +45,62 @@
#include "generic.h"
/*
+ * This is the PXA2xx sched_clock implementation. This has a resolution
+ * of at least 308ns and a maximum value that depends on the value of
+ * CLOCK_TICK_RATE.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to this function.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(OSCR);
+ /* Note: top bit ov v needs cleared unless multiplier is even. */
+
+#if CLOCK_TICK_RATE == 3686400
+ /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */
+ /* The <<1 is used to get rid of tick.hi top bit */
+ v *= 78125<<1;
+ do_div(v, 288<<1);
+#elif CLOCK_TICK_RATE == 3250000
+ /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */
+ v *= 4000;
+ do_div(v, 13);
+#elif CLOCK_TICK_RATE == 3249600
+ /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */
+ v *= 625000;
+ do_div(v, 2031);
+#else
+#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE"
+ /*
+ * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for
+ * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand
+ * years range which is nice, but with higher computation cost.
+ */
+ {
+ union {
+ unsigned long long val;
+ struct { unsigned long lo, hi; };
+ } x;
+ unsigned long long y;
+
+ x.val = v;
+ x.hi &= 0x7fffffff;
+ y = (unsigned long long)x.lo * NSEC_PER_SEC;
+ x.lo = y;
+ y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC;
+ x.hi = do_div(y, CLOCK_TICK_RATE);
+ do_div(x.val, CLOCK_TICK_RATE);
+ x.hi += y;
+ v = x.val;
+ }
+#endif
+
+ return v;
+}
+
+/*
* Handy function to set GPIO alternate functions
*/
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ab1a16025d51..f815678a9d63 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -143,7 +143,7 @@ static struct irq_chip pxa_low_gpio_chip = {
* Demux handler for GPIO>=2 edge detect interrupts
*/
-static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc)
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int mask;
int loop;
@@ -286,27 +286,27 @@ void __init pxa_init_irq(void)
for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
set_irq_chip(irq, &pxa_internal_chip_low);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
#if PXA_INTERNAL_IRQS > 32
for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
set_irq_chip(irq, &pxa_internal_chip_high);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
#endif
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
set_irq_chip(irq, &pxa_low_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
set_irq_chip(irq, &pxa_muxed_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 5749f6b72e12..8e27a64fa9f4 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -75,7 +75,7 @@ static struct irq_chip lpd270_irq_chip = {
.unmask = lpd270_unmask_irq,
};
-static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending;
@@ -105,7 +105,7 @@ static void __init lpd270_init_irq(void)
/* setup extra LogicPD PXA270 irqs */
for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
set_irq_chip(irq, &lpd270_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 142c33c3dff5..055de7f4f00a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -85,7 +85,7 @@ static struct irq_chip lubbock_irq_chip = {
.unmask = lubbock_unmask_irq,
};
-static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
do {
@@ -108,7 +108,7 @@ static void __init lubbock_init_irq(void)
/* setup extra lubbock irqs */
for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
set_irq_chip(irq, &lubbock_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 49c34d94a9fe..56d94d88d5ca 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -71,7 +71,7 @@ static struct irq_chip mainstone_irq_chip = {
.unmask = mainstone_unmask_irq,
};
-static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
do {
@@ -94,7 +94,7 @@ static void __init mainstone_init_irq(void)
/* setup extra Mainstone irqs */
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
set_irq_chip(irq, &mainstone_irq_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
else
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 2112c414f0e2..b4d8276d6050 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -83,7 +83,8 @@ int pxa_pm_enter(suspend_state_t state)
#ifdef CONFIG_IWMMXT
/* force any iWMMXt context to ram **/
- iwmmxt_task_disable(NULL);
+ if (elf_hwcap & HWCAP_IWMMXT)
+ iwmmxt_task_disable(NULL);
#endif
/* preserve current time */
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 3ac268fa419b..b91466861029 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -124,6 +124,7 @@ static struct irqaction pxa_timer_irq = {
static void __init pxa_timer_init(void)
{
struct timespec tv;
+ unsigned long flags;
set_rtc = pxa_set_rtc;
@@ -132,12 +133,12 @@ static void __init pxa_timer_init(void)
do_settimeofday(&tv);
OIER = 0; /* disable any timer interrupts */
- OSCR = LATCH*2; /* push OSCR out of the way */
- OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &pxa_timer_irq);
+ local_irq_save(flags);
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
- OSCR = 0; /* initialize free-running timer */
+ OSMR0 = OSCR + LATCH; /* set initial match */
+ local_irq_restore(flags);
}
#ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 56b2716f8cf5..7a029621db43 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -34,7 +34,7 @@ static void iomd_unmask_irq_a(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKA);
}
-static struct irqchip iomd_a_chip = {
+static struct irq_chip iomd_a_chip = {
.ack = iomd_ack_irq_a,
.mask = iomd_mask_irq_a,
.unmask = iomd_unmask_irq_a,
@@ -58,7 +58,7 @@ static void iomd_unmask_irq_b(unsigned int irq)
iomd_writeb(val | mask, IOMD_IRQMASKB);
}
-static struct irqchip iomd_b_chip = {
+static struct irq_chip iomd_b_chip = {
.ack = iomd_mask_irq_b,
.mask = iomd_mask_irq_b,
.unmask = iomd_unmask_irq_b,
@@ -82,7 +82,7 @@ static void iomd_unmask_irq_dma(unsigned int irq)
iomd_writeb(val | mask, IOMD_DMAMASK);
}
-static struct irqchip iomd_dma_chip = {
+static struct irq_chip iomd_dma_chip = {
.ack = iomd_mask_irq_dma,
.mask = iomd_mask_irq_dma,
.unmask = iomd_unmask_irq_dma,
@@ -106,7 +106,7 @@ static void iomd_unmask_irq_fiq(unsigned int irq)
iomd_writeb(val | mask, IOMD_FIQMASK);
}
-static struct irqchip iomd_fiq_chip = {
+static struct irq_chip iomd_fiq_chip = {
.ack = iomd_mask_irq_fiq,
.mask = iomd_mask_irq_fiq,
.unmask = iomd_unmask_irq_fiq,
@@ -134,19 +134,19 @@ void __init rpc_init_irq(void)
switch (irq) {
case 0 ... 7:
set_irq_chip(irq, &iomd_a_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 8 ... 15:
set_irq_chip(irq, &iomd_b_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
case 16 ... 21:
set_irq_chip(irq, &iomd_dma_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, flags);
break;
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 9aa26b99045d..9f46bf330bc8 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -41,9 +41,16 @@ config BAST_PC104_IRQ
Say Y here to enable the PC104 IRQ routing on the
Simtec BAST (EB2410ITX)
+config PM_H1940
+ bool
+ depends on PM
+ help
+ Internal node for H1940 and related PM
+
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
+ select PM_H1940
help
Say Y here if you are using the HP IPAQ H1940
@@ -115,6 +122,7 @@ config MACH_VR1000
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
+ select PM_H1940
help
Say Y here if you are using the HP iPAQ rx3715.
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index d66013365b6b..27663e28cc88 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+obj-$(CONFIG_PM_H1940) += pm-h1940.o
# S3C2412 support
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 23d5beea5568..379efe70778c 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -88,7 +88,7 @@ bast_pc104_mask(unsigned int irqno)
static void
bast_pc104_maskack(unsigned int irqno)
{
- struct irqdesc *desc = irq_desc + IRQ_ISA;
+ struct irq_desc *desc = irq_desc + IRQ_ISA;
bast_pc104_mask(irqno);
desc->chip->ack(IRQ_ISA);
@@ -104,7 +104,7 @@ bast_pc104_unmask(unsigned int irqno)
__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
}
-static struct irqchip bast_pc104_chip = {
+static struct irq_chip bast_pc104_chip = {
.mask = bast_pc104_mask,
.unmask = bast_pc104_unmask,
.ack = bast_pc104_maskack
@@ -112,7 +112,7 @@ static struct irqchip bast_pc104_chip = {
static void
bast_irq_pc104_demux(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned int stat;
unsigned int irqno;
@@ -157,7 +157,7 @@ static __init int bast_irq_init(void)
unsigned int irqno = bast_pc104_irqs[i];
set_irq_chip(irqno, &bast_pc104_chip);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
}
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 683b3491ba3c..3c0ed7871c55 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -180,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno)
__raw_writel(mask, S3C2410_INTMSK);
}
-struct irqchip s3c_irq_level_chip = {
+struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.ack = s3c_irq_maskack,
.mask = s3c_irq_mask,
@@ -188,7 +188,7 @@ struct irqchip s3c_irq_level_chip = {
.set_wake = s3c_irq_wake
};
-static struct irqchip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
@@ -206,18 +206,6 @@ s3c_irqext_mask(unsigned int irqno)
mask = __raw_readl(S3C24XX_EINTMASK);
mask |= ( 1UL << irqno);
__raw_writel(mask, S3C24XX_EINTMASK);
-
- if (irqno <= (IRQ_EINT7 - EXTINT_OFF)) {
- /* check to see if all need masking */
-
- if ((mask & (0xf << 4)) == (0xf << 4)) {
- /* all masked, mask the parent */
- s3c_irq_mask(IRQ_EINT4t7);
- }
- } else {
- /* todo: the same check as above for the rest of the irq regs...*/
-
- }
}
static void
@@ -229,7 +217,6 @@ s3c_irqext_ack(unsigned int irqno)
bit = 1UL << (irqno - EXTINT_OFF);
-
mask = __raw_readl(S3C24XX_EINTMASK);
__raw_writel(bit, S3C24XX_EINTPEND);
@@ -258,8 +245,6 @@ s3c_irqext_unmask(unsigned int irqno)
mask = __raw_readl(S3C24XX_EINTMASK);
mask &= ~( 1UL << irqno);
__raw_writel(mask, S3C24XX_EINTMASK);
-
- s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23);
}
int
@@ -344,7 +329,7 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
return 0;
}
-static struct irqchip s3c_irqext_chip = {
+static struct irq_chip s3c_irqext_chip = {
.name = "s3c-ext",
.mask = s3c_irqext_mask,
.unmask = s3c_irqext_unmask,
@@ -353,7 +338,7 @@ static struct irqchip s3c_irqext_chip = {
.set_wake = s3c_irqext_wake
};
-static struct irqchip s3c_irq_eint0t4 = {
+static struct irq_chip s3c_irq_eint0t4 = {
.name = "s3c-ext0",
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
@@ -390,7 +375,7 @@ s3c_irq_uart0_ack(unsigned int irqno)
s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
}
-static struct irqchip s3c_irq_uart0 = {
+static struct irq_chip s3c_irq_uart0 = {
.name = "s3c-uart0",
.mask = s3c_irq_uart0_mask,
.unmask = s3c_irq_uart0_unmask,
@@ -417,7 +402,7 @@ s3c_irq_uart1_ack(unsigned int irqno)
s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
}
-static struct irqchip s3c_irq_uart1 = {
+static struct irq_chip s3c_irq_uart1 = {
.name = "s3c-uart1",
.mask = s3c_irq_uart1_mask,
.unmask = s3c_irq_uart1_unmask,
@@ -444,7 +429,7 @@ s3c_irq_uart2_ack(unsigned int irqno)
s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
}
-static struct irqchip s3c_irq_uart2 = {
+static struct irq_chip s3c_irq_uart2 = {
.name = "s3c-uart2",
.mask = s3c_irq_uart2_mask,
.unmask = s3c_irq_uart2_unmask,
@@ -471,7 +456,7 @@ s3c_irq_adc_ack(unsigned int irqno)
s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
}
-static struct irqchip s3c_irq_adc = {
+static struct irq_chip s3c_irq_adc = {
.name = "s3c-adc",
.mask = s3c_irq_adc_mask,
.unmask = s3c_irq_adc_unmask,
@@ -480,11 +465,11 @@ static struct irqchip s3c_irq_adc = {
/* irq demux for adc */
static void s3c_irq_demux_adc(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned int subsrc, submsk;
unsigned int offset = 9;
- struct irqdesc *mydesc;
+ struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -512,7 +497,7 @@ static void s3c_irq_demux_uart(unsigned int start)
{
unsigned int subsrc, submsk;
unsigned int offset = start - IRQ_S3CUART_RX0;
- struct irqdesc *desc;
+ struct irq_desc *desc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -549,7 +534,7 @@ static void s3c_irq_demux_uart(unsigned int start)
static void
s3c_irq_demux_uart0(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
irq = irq;
s3c_irq_demux_uart(IRQ_S3CUART_RX0);
@@ -557,7 +542,7 @@ s3c_irq_demux_uart0(unsigned int irq,
static void
s3c_irq_demux_uart1(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
irq = irq;
s3c_irq_demux_uart(IRQ_S3CUART_RX1);
@@ -565,7 +550,7 @@ s3c_irq_demux_uart1(unsigned int irq,
static void
s3c_irq_demux_uart2(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
irq = irq;
s3c_irq_demux_uart(IRQ_S3CUART_RX2);
@@ -573,7 +558,7 @@ s3c_irq_demux_uart2(unsigned int irq,
static void
s3c_irq_demux_extint8(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
@@ -595,7 +580,7 @@ s3c_irq_demux_extint8(unsigned int irq,
static void
s3c_irq_demux_extint4t7(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
@@ -738,7 +723,7 @@ void __init s3c24xx_init_irq(void)
case IRQ_UART2:
case IRQ_ADCPARENT:
set_irq_chip(irqno, &s3c_irq_level_chip);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
break;
case IRQ_RESERVED6:
@@ -749,7 +734,7 @@ void __init s3c24xx_init_irq(void)
default:
//irqdbf("registering irq %d (s3c irq)\n", irqno);
set_irq_chip(irqno, &s3c_irq_chip);
- set_irq_handler(irqno, do_edge_IRQ);
+ set_irq_handler(irqno, handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
}
@@ -769,14 +754,14 @@ void __init s3c24xx_init_irq(void)
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
irqdbf("registering irq %d (ext int)\n", irqno);
set_irq_chip(irqno, &s3c_irq_eint0t4);
- set_irq_handler(irqno, do_edge_IRQ);
+ set_irq_handler(irqno, handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
irqdbf("registering irq %d (extended s3c irq)\n", irqno);
set_irq_chip(irqno, &s3c_irqext_chip);
- set_irq_handler(irqno, do_edge_IRQ);
+ set_irq_handler(irqno, handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
@@ -787,28 +772,28 @@ void __init s3c24xx_init_irq(void)
for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
set_irq_chip(irqno, &s3c_irq_uart0);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
set_irq_chip(irqno, &s3c_irq_uart1);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
set_irq_chip(irqno, &s3c_irq_uart2);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
irqdbf("registering irq %d (s3c adc irq)\n", irqno);
set_irq_chip(irqno, &s3c_irq_adc);
- set_irq_handler(irqno, do_edge_IRQ);
+ set_irq_handler(irqno, handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
index 842a9f42c97b..3686a0082245 100644
--- a/arch/arm/mach-s3c2410/irq.h
+++ b/arch/arm/mach-s3c2410/irq.h
@@ -17,7 +17,7 @@
#define EXTINT_OFF (IRQ_EINT4 - 4)
-extern struct irqchip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_level_chip;
static inline void
s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 8c895c077d22..f5b98099a5d9 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -33,6 +33,7 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/h1940.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
@@ -41,6 +42,7 @@
#include "clock.h"
#include "devs.h"
#include "cpu.h"
+#include "pm.h"
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
@@ -164,12 +166,16 @@ static void __init h1940_map_io(void)
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
s3c24xx_set_board(&h1940_board);
+
+ /* setup PM */
+
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+ s3c2410_pm_init();
}
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
-
}
static void __init h1940_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
index e193ba69e652..a4ab144e7292 100644
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -114,6 +114,15 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
.clocks = osiris_serial_clocks,
.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
},
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ }
};
/* NAND Flash on Osiris board */
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index 23d7c052013c..ecbcdf79d739 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -42,6 +42,7 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/h1940.h>
#include <asm/arch/nand.h>
#include <asm/arch/fb.h>
@@ -224,7 +225,9 @@ static void __init rx3715_init_irq(void)
static void __init rx3715_init_machine(void)
{
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
s3c2410_pm_init();
+
s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
}
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a0d7692cdb2b..e2eda3937ab0 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -41,6 +41,7 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
#include "clock.h"
#include "devs.h"
@@ -313,6 +314,50 @@ static struct platform_device vr1000_dm9k1 = {
}
};
+/* LEDS */
+
+static struct s3c24xx_led_platdata vr1000_led1_pdata = {
+ .name = "led1",
+ .gpio = S3C2410_GPB0,
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led2_pdata = {
+ .name = "led2",
+ .gpio = S3C2410_GPB1,
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led3_pdata = {
+ .name = "led3",
+ .gpio = S3C2410_GPB2,
+ .def_trigger = "",
+};
+
+static struct platform_device vr1000_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &vr1000_led1_pdata,
+ },
+};
+
+static struct platform_device vr1000_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &vr1000_led2_pdata,
+ },
+};
+
+static struct platform_device vr1000_led3 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &vr1000_led3_pdata,
+ },
+};
+
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
@@ -325,7 +370,10 @@ static struct platform_device *vr1000_devices[] __initdata = {
&serial_device,
&vr1000_nor,
&vr1000_dm9k0,
- &vr1000_dm9k1
+ &vr1000_dm9k1,
+ &vr1000_led1,
+ &vr1000_led2,
+ &vr1000_led3,
};
static struct clk *vr1000_clocks[] = {
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
new file mode 100644
index 000000000000..7d66de7ff7db
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s3c2410/pm-h1940.S
+ *
+ * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 Suspend to RAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+
+ .text
+ .global h1940_pm_return
+
+h1940_pm_return:
+ mov r0, #S3C2410_PA_GPIO
+ ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
index e51d76669512..77c6814c0f05 100644
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -32,6 +32,7 @@
#include <asm/mach-types.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/h1940.h>
#include "cpu.h"
#include "pm.h"
@@ -52,6 +53,35 @@ static void s3c2410_pm_prepare(void)
DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+ if (machine_is_h1940()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
+ /* the RX3715 uses similar code and the same H1940 and the
+ * same offsets for resume and checksum pointers */
+
+ if (machine_is_rx3715()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF2, 1);
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c
index 7f741547658f..ffcc30b23a80 100644
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2412-irq.c
@@ -98,7 +98,7 @@ s3c2412_irq_unmask(unsigned int irqno)
__raw_writel(mask & ~bitval, S3C2410_INTMSK);
}
-static struct irqchip s3c2412_irq_eint0t4 = {
+static struct irq_chip s3c2412_irq_eint0t4 = {
.ack = s3c2412_irq_ack,
.mask = s3c2412_irq_mask,
.unmask = s3c2412_irq_unmask,
@@ -112,7 +112,7 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
set_irq_chip(irqno, &s3c2412_irq_eint0t4);
- set_irq_handler(irqno, do_edge_IRQ);
+ set_irq_handler(irqno, handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
index 39db0752d53b..1ba19b27ab05 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -42,10 +42,10 @@
/* WDT/AC97 */
static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irqdesc *mydesc;
+ struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -90,7 +90,7 @@ s3c_irq_wdtac97_ack(unsigned int irqno)
s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
}
-static struct irqchip s3c_irq_wdtac97 = {
+static struct irq_chip s3c_irq_wdtac97 = {
.mask = s3c_irq_wdtac97_mask,
.unmask = s3c_irq_wdtac97_unmask,
.ack = s3c_irq_wdtac97_ack,
@@ -105,12 +105,12 @@ static int s3c2440_irq_add(struct sys_device *sysdev)
/* add new chained handler for wdt, ac7 */
set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
- set_irq_handler(IRQ_WDT, do_level_IRQ);
+ set_irq_handler(IRQ_WDT, handle_level_irq);
set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
set_irq_chip(irqno, &s3c_irq_wdtac97);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
index 146f2109dd90..ede94636a72a 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2410/s3c244x-irq.c
@@ -42,10 +42,10 @@
/* camera irq */
static void s3c_irq_demux_cam(unsigned int irq,
- struct irqdesc *desc)
+ struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irqdesc *mydesc;
+ struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -89,7 +89,7 @@ s3c_irq_cam_ack(unsigned int irqno)
s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
}
-static struct irqchip s3c_irq_cam = {
+static struct irq_chip s3c_irq_cam = {
.mask = s3c_irq_cam_mask,
.unmask = s3c_irq_cam_unmask,
.ack = s3c_irq_cam_ack,
@@ -100,18 +100,18 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
unsigned int irqno;
set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
- set_irq_handler(IRQ_NFCON, do_level_IRQ);
+ set_irq_handler(IRQ_NFCON, handle_level_irq);
set_irq_flags(IRQ_NFCON, IRQF_VALID);
/* add chained handler for camera */
set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
- set_irq_handler(IRQ_CAM, do_level_IRQ);
+ set_irq_handler(IRQ_CAM, handle_level_irq);
set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
set_irq_chip(irqno, &s3c_irq_cam);
- set_irq_handler(irqno, do_level_IRQ);
+ set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 4575f316e141..e510295c2580 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <asm/div64.h>
+#include <asm/cnt32_to_63.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -118,15 +119,21 @@ EXPORT_SYMBOL(cpufreq_get);
/*
* This is the SA11x0 sched_clock implementation. This has
- * a resolution of 271ns, and a maximum value of 1165s.
+ * a resolution of 271ns, and a maximum value of 32025597s (370 days).
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to this function.
+ *
* ( * 1E9 / 3686400 => * 78125 / 288)
*/
unsigned long long sched_clock(void)
{
- unsigned long long v;
+ unsigned long long v = cnt32_to_63(OSCR);
- v = (unsigned long long)OSCR * 78125;
- do_div(v, 288);
+ /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
+ v *= 78125<<1;
+ do_div(v, 288<<1);
return v;
}
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index fa6dc71bd6ad..b034ad69a324 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -702,7 +702,7 @@ static u32 gpio_irq_mask[] = {
GPIO2_SD_CON_SLT,
};
-static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc)
+static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
{
int i;
@@ -719,14 +719,14 @@ static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc)
if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
if (irq & kpio_irq_mask[j])
- do_edge_IRQ(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
+ handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
/* GPIO2 */
irq = H3800_ASIC2_GPIINTFLAG;
if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
if (irq & gpio_irq_mask[j])
- do_edge_IRQ(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
+ handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
}
if (i >= MAX_ASIC_ISR_LOOPS)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index f4c6322ca33e..5642aeca079e 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -110,7 +110,7 @@ static struct irq_chip sa1100_low_gpio_chip = {
* and call the handler.
*/
static void
-sa1100_high_gpio_handler(unsigned int irq, struct irqdesc *desc)
+sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int mask;
@@ -327,19 +327,19 @@ void __init sa1100_init_irq(void)
for (irq = 0; irq <= 10; irq++) {
set_irq_chip(irq, &sa1100_low_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = 12; irq <= 31; irq++) {
set_irq_chip(irq, &sa1100_normal_chip);
- set_irq_handler(irq, do_level_IRQ);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
for (irq = 32; irq <= 48; irq++) {
set_irq_chip(irq, &sa1100_high_gpio_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 354d5e91da59..075d4d1d63be 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -29,12 +29,12 @@
* is rather unfortunate.
*/
static void
-neponset_irq_handler(unsigned int irq, struct irqdesc *desc)
+neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int irr;
while (1) {
- struct irqdesc *d;
+ struct irq_desc *d;
/*
* Acknowledge the parent IRQ.
@@ -168,9 +168,9 @@ static int neponset_probe(struct platform_device *dev)
* Setup other Neponset IRQs. SA1111 will be done by the
* generic SA1111 code.
*/
- set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ);
+ set_irq_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
- set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ);
+ set_irq_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
/*
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 4284bd6f7a1f..29c89f9eb2ce 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -118,6 +118,7 @@ static struct irqaction sa1100_timer_irq = {
static void __init sa1100_timer_init(void)
{
struct timespec tv;
+ unsigned long flags;
set_rtc = sa1100_set_rtc;
@@ -126,12 +127,12 @@ static void __init sa1100_timer_init(void)
do_settimeofday(&tv);
OIER = 0; /* disable any timer interrupts */
- OSCR = LATCH*2; /* push OSCR out of the way */
- OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &sa1100_timer_irq);
+ local_irq_save(flags);
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
- OSCR = 0; /* initialize free-running timer */
+ OSMR0 = OSCR + LATCH; /* set initial match */
+ local_irq_restore(flags);
}
#ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 297ecf130650..00a6c1466867 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -82,7 +82,7 @@ void __init shark_init_irq(void)
for (irq = 0; irq < NR_IRQS; irq++) {
set_irq_chip(irq, &fb_chip);
- set_irq_handler(irq, do_edge_IRQ);
+ set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3b8576111c16..57196947559f 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -27,6 +27,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <asm/cnt32_to_63.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -77,7 +78,7 @@ static struct irq_chip sic_chip = {
};
static void
-sic_handle_irq(unsigned int irq, struct irqdesc *desc)
+sic_handle_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
@@ -123,7 +124,7 @@ void __init versatile_init_irq(void)
for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
set_irq_chip(i, &sic_chip);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
}
@@ -228,14 +229,19 @@ void __init versatile_map_io(void)
/*
* This is the Versatile sched_clock implementation. This has
- * a resolution of 41.7ns, and a maximum value of about 179s.
+ * a resolution of 41.7ns, and a maximum value of about 35583 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 89 seconds between successive
+ * calls to this function.
*/
unsigned long long sched_clock(void)
{
- unsigned long long v;
+ unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER));
- v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
- do_div(v, 3);
+ /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
+ v *= 125<<1;
+ do_div(v, 3<<1);
return v;
}
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 503725b166fc..be439bb9d450 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -81,22 +81,18 @@ static struct amba_device *amba_devs[] __initdata = {
&mmc1_device,
};
-static int __init versatile_pb_init(void)
+static void __init versatile_pb_init(void)
{
int i;
- if (machine_is_versatile_pb()) {
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
- }
- }
+ versatile_init();
- return 0;
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
}
-arch_initcall(versatile_pb_init);
-
MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_io = 0x101f1000,
@@ -105,5 +101,5 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
.map_io = versatile_map_io,
.init_irq = versatile_init_irq,
.timer = &versatile_timer,
- .init_machine = versatile_init,
+ .init_machine = versatile_pb_init,
MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b09a19f87d68..aade2f72c920 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -333,7 +333,7 @@ config CPU_XSCALE
# XScale Core Version 3
config CPU_XSC3
bool
- depends on ARCH_IXP23XX
+ depends on ARCH_IXP23XX || ARCH_IOP13XX
default y
select CPU_32v5
select CPU_ABRT_EV5T
@@ -580,7 +580,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6
+ depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3
help
Say Y here to disable branch prediction. If unsure, say N.
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index bb2bc9ab6bd3..a44e30970635 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -1,4 +1,7 @@
/* the upper-most page table pointer */
+
+#ifdef CONFIG_MMU
+
extern pmd_t *top_pmd;
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
@@ -13,6 +16,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
return pmd_off(pgd_offset_k(virt), virt);
}
+#endif
+
struct map_desc;
struct meminfo;
struct pglist_data;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index f866bf6b97d4..b7f194af20b4 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -265,7 +265,7 @@ static void __init build_mem_type_table(void)
if (arch_is_coherent()) {
if (cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
- mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
+ mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
}
}
@@ -619,6 +619,13 @@ void __init reserve_node_zero(pg_data_t *pgdat)
if (machine_is_p720t())
res_size = 0x00014000;
+ /* H1940 and RX3715 need to reserve this for suspend */
+
+ if (machine_is_h1940() || machine_is_rx3715()) {
+ reserve_bootmem_node(pgdat, 0x30003000, 0x1000);
+ reserve_bootmem_node(pgdat, 0x30081000, 0x1000);
+ }
+
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index d0e66424a597..05818fc0c705 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -6,10 +6,12 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
+#include <linux/bootmem.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/page.h>
+#include <asm/mach/arch.h>
#include "mm.h"
@@ -76,7 +78,7 @@ void __iomem *__ioremap(unsigned long phys_addr, size_t size,
}
EXPORT_SYMBOL(__ioremap);
-void __iounmap(void __iomem *addr)
+void __iounmap(volatile void __iomem *addr)
{
}
EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 1d8316f3cecf..289b8e6f504d 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -29,9 +29,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 89b1d6d3d7c0..bed9db6ba582 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -29,9 +29,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index a089528e6bce..d2a7c1b9cab9 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index d6d84d92c7c7..3247ce5c0177 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 0432e4806888..ce4f9eef763c 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -15,9 +15,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
ENTRY(cpu_arm6_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index c2f0705bfd49..c04c194da785 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -36,9 +36,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 40713818a87b..7069f495cf9b 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -12,9 +12,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 22d7e3100ea6..d091c2571823 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -12,9 +12,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 4adb46b3a4e0..65cbb2851bff 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -28,9 +28,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 571f082f0247..52761b70d735 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -29,9 +29,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 8d9a9f93b011..5b74339d1588 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -52,9 +52,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 44a7a652d625..8628ed29a955 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -28,9 +28,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 2397f4b6e151..786c593778f0 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -11,9 +11,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index e18617564421..a60c1421d450 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -13,9 +13,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
/*
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 918ebf65d4f6..4848eeac86b6 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -12,9 +12,9 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
-#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index c878064e9b88..cd7d865c9d19 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/procinfo.h>
+#include <asm/elf.h>
#include <asm/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index b23b66a6155a..b776653cc31c 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -22,7 +22,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/procinfo.h>
+#include <asm/elf.h>
#include <asm/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 6f72549f8843..b440c8a1d345 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -13,8 +13,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/elf.h>
#include <asm/hardware/arm_scu.h>
-#include <asm/procinfo.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 4ace2d8090c7..1ef564d0957f 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -27,7 +27,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/procinfo.h>
+#include <asm/elf.h>
#include <asm/hardware.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
@@ -57,11 +57,6 @@
#define L2_CACHE_ENABLE 1
/*
- * Enable the Branch Target Buffer (can cause crashes, see erratum #42.)
- */
-#define BTB_ENABLE 0
-
-/*
* This macro is used to wait for a CP15 write and is needed
* when we have to ensure that the last operation to the co-pro
* was completed before continuing with operation.
@@ -371,8 +366,10 @@ ENTRY(cpu_xsc3_switch_mm)
ENTRY(cpu_xsc3_set_pte)
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0xdf0 @ Keep C, B, coherency bits
+ bic r2, r1, #0xff0 @ Keep C, B bits
orr r2, r2, #PTE_TYPE_EXT @ extended page
+ tst r1, #L_PTE_SHARED @ Shared?
+ orrne r2, r2, #0x200
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -432,9 +429,7 @@ __xsc3_setup:
mrc p15, 0, r0, c1, c0, 0 @ get control register
bic r0, r0, r5 @ .... .... .... ..A.
orr r0, r0, r6 @ .... .... .... .C.M
-#if BTB_ENABLE
orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
-#endif
#if L2_CACHE_ENABLE
orr r0, r0, #0x04000000 @ L2 enable
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2749c1f88d7d..cc1004b3e511 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -23,7 +23,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/procinfo.h>
+#include <asm/elf.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
@@ -491,12 +491,7 @@ __xscale_setup:
mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
-#ifdef CONFIG_IWMMXT
- mov r0, #0 @ initially disallow access to CP0/CP1
-#else
- mov r0, #1 @ Allow access to CP0
-#endif
- orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
+ mov r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
orr r0, r0, #1 << 13 @ Its undefined whether this
mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
@@ -909,7 +904,7 @@ __pxa270_proc_info:
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_pxa270_name
.long xscale_processor_functions
.long v4wbi_tlb_fns
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8162eed8b500..4f2fd5591337 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -410,7 +410,7 @@ static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int tr
trigger & __IRQT_RISEDGE);
MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
trigger & __IRQT_FALEDGE);
- /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level
+ /* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level
* triggering requested. */
}
@@ -783,7 +783,7 @@ void omap_free_gpio(int gpio)
* line's interrupt handler has been run, we may miss some nested
* interrupts.
*/
-static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc)
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *isr_reg = NULL;
u32 isr;
@@ -853,7 +853,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
- struct irqdesc *d;
+ struct irq_desc *d;
int irq_mask;
if (!(isr & 1))
continue;
@@ -1092,7 +1092,7 @@ static int __init _omap_gpio_init(void)
set_irq_chip(j, &mpuio_irq_chip);
else
set_irq_chip(j, &gpio_irq_chip);
- set_irq_handler(j, do_simple_IRQ);
+ set_irq_handler(j, handle_simple_irq);
set_irq_flags(j, IRQF_VALID);
}
set_irq_chained_handler(bank->irq, gpio_irq_handler);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 579c69ae9ff7..8bcb838e5444 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Oct 16 21:13:36 2006
+# Last update: Thu Dec 7 17:19:20 2006
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -79,7 +79,7 @@ psionw ARCH_PSIONW PSIONW 60
aln SA1100_ALN ALN 61
epxa ARCH_CAMELOT CAMELOT 62
gds2200 SA1100_GDS2200 GDS2200 63
-psion_series7 SA1100_PSION_SERIES7 PSION_SERIES7 64
+netbook SA1100_PSION_SERIES7 PSION_SERIES7 64
xfile SA1100_XFILE XFILE 65
accelent_ep9312 ARCH_ACCELENT_EP9312 ACCELENT_EP9312 66
ic200 ARCH_IC200 IC200 67
@@ -810,9 +810,9 @@ sb3010 MACH_SB3010 SB3010 795
rm9200 MACH_RM9200 RM9200 796
dma03 MACH_DMA03 DMA03 797
road_s101 MACH_ROAD_S101 ROAD_S101 798
-iq_nextgen_a MACH_IQ_NEXTGEN_A IQ_NEXTGEN_A 799
+iq81340sc MACH_IQ81340SC IQ81340SC 799
iq_nextgen_b MACH_IQ_NEXTGEN_B IQ_NEXTGEN_B 800
-iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801
+iq81340mc MACH_IQ81340MC IQ81340MC 801
iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802
iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803
mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804
@@ -1165,9 +1165,57 @@ pnx4010 MACH_PNX4010 PNX4010 1151
oxnas MACH_OXNAS OXNAS 1152
fiori MACH_FIORI FIORI 1153
ml1200 MACH_ML1200 ML1200 1154
-cactus MACH_CACTUS CACTUS 1155
+pecos MACH_PECOS PECOS 1155
nb2xxx MACH_NB2XXX NB2XXX 1156
hw6900 MACH_HW6900 HW6900 1157
cdcs_quoll MACH_CDCS_QUOLL CDCS_QUOLL 1158
quicksilver MACH_QUICKSILVER QUICKSILVER 1159
uplat926 MACH_UPLAT926 UPLAT926 1160
+dep2410_dep2410 MACH_DEP2410_THOMAS DEP2410_THOMAS 1161
+dtk2410 MACH_DTK2410 DTK2410 1162
+chili MACH_CHILI CHILI 1163
+demeter MACH_DEMETER DEMETER 1164
+dionysus MACH_DIONYSUS DIONYSUS 1165
+as352x MACH_AS352X AS352X 1166
+service MACH_SERVICE SERVICE 1167
+cs_e9301 MACH_CS_E9301 CS_E9301 1168
+micro9m MACH_MICRO9M MICRO9M 1169
+ia_mospck MACH_IA_MOSPCK IA_MOSPCK 1170
+ql201b MACH_QL201B QL201B 1171
+bbm MACH_BBM BBM 1174
+exxx MACH_EXXX EXXX 1175
+wma11b MACH_WMA11B WMA11B 1176
+pelco_atlas MACH_PELCO_ATLAS PELCO_ATLAS 1177
+g500 MACH_G500 G500 1178
+bug MACH_BUG BUG 1179
+mx33ads MACH_MX33ADS MX33ADS 1180
+chub MACH_CHUB CHUB 1181
+gta01 MACH_GTA01 GTA01 1182
+w90n740 MACH_W90N740 W90N740 1183
+medallion_sa2410 MACH_MEDALLION_SA2410 MEDALLION_SA2410 1184
+ia_cpu_9200_2 MACH_IA_CPU_9200_2 IA_CPU_9200_2 1185
+dimmrm9200 MACH_DIMMRM9200 DIMMRM9200 1186
+pm9261 MACH_PM9261 PM9261 1187
+mx21 MACH_MX21 MX21 1188
+ml7304 MACH_ML7304 ML7304 1189
+ucp250 MACH_UCP250 UCP250 1190
+intboard MACH_INTBOARD INTBOARD 1191
+gulfstream MACH_GULFSTREAM GULFSTREAM 1192
+labquest MACH_LABQUEST LABQUEST 1193
+vcmx313 MACH_VCMX313 VCMX313 1194
+urg200 MACH_URG200 URG200 1195
+cpux255lcdnet MACH_CPUX255LCDNET CPUX255LCDNET 1196
+netdcu9 MACH_NETDCU9 NETDCU9 1197
+netdcu10 MACH_NETDCU10 NETDCU10 1198
+dspg_dga MACH_DSPG_DGA DSPG_DGA 1199
+dspg_dvw MACH_DSPG_DVW DSPG_DVW 1200
+solos MACH_SOLOS SOLOS 1201
+at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202
+osstbox MACH_OSSTBOX OSSTBOX 1203
+kbat9261 MACH_KBAT9261 KBAT9261 1204
+ct1100 MACH_CT1100 CT1100 1205
+akcppxa MACH_AKCPPXA AKCPPXA 1206
+zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
+hitrack MACH_HITRACK HITRACK 1208
+syme1 MACH_SYME1 SYME1 1209
+syhl1 MACH_SYHL1 SYHL1 1210
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 9e3e2a69c03a..fd5475071acc 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -80,12 +80,38 @@ static int amba_resume(struct device *dev)
return ret;
}
+#define amba_attr_func(name,fmt,arg...) \
+static ssize_t name##_show(struct device *_dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct amba_device *dev = to_amba_device(_dev); \
+ return sprintf(buf, fmt, arg); \
+}
+
+#define amba_attr(name,fmt,arg...) \
+amba_attr_func(name,fmt,arg) \
+static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL)
+
+amba_attr_func(id, "%08x\n", dev->periphid);
+amba_attr(irq0, "%u\n", dev->irq[0]);
+amba_attr(irq1, "%u\n", dev->irq[1]);
+amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n",
+ (unsigned long long)dev->res.start, (unsigned long long)dev->res.end,
+ dev->res.flags);
+
+static struct device_attribute amba_dev_attrs[] = {
+ __ATTR_RO(id),
+ __ATTR_RO(resource),
+ __ATTR_NULL,
+};
+
/*
* Primecells are part of the Advanced Microcontroller Bus Architecture,
* so we call the bus "amba".
*/
static struct bus_type amba_bustype = {
.name = "amba",
+ .dev_attrs = amba_dev_attrs,
.match = amba_match,
.uevent = amba_uevent,
.suspend = amba_suspend,
@@ -169,21 +195,6 @@ static void amba_device_release(struct device *dev)
kfree(d);
}
-#define amba_attr(name,fmt,arg...) \
-static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
- struct amba_device *dev = to_amba_device(_dev); \
- return sprintf(buf, fmt, arg); \
-} \
-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
-
-amba_attr(id, "%08x\n", dev->periphid);
-amba_attr(irq0, "%u\n", dev->irq[0]);
-amba_attr(irq1, "%u\n", dev->irq[1]);
-amba_attr(resource, "\t%016llx\t%016llx\t%016lx\n",
- (unsigned long long)dev->res.start, (unsigned long long)dev->res.end,
- dev->res.flags);
-
/**
* amba_device_register - register an AMBA device
* @dev: AMBA device to register
@@ -208,40 +219,46 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
dev_warn(&dev->dev, "coherent dma mask is unset\n");
ret = request_resource(parent, &dev->res);
- if (ret == 0) {
- tmp = ioremap(dev->res.start, SZ_4K);
- if (!tmp) {
- ret = -ENOMEM;
- goto out;
- }
-
- for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
- for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
-
- iounmap(tmp);
-
- if (cid == 0xb105f00d)
- dev->periphid = pid;
-
- if (dev->periphid)
- ret = device_register(&dev->dev);
- else
- ret = -ENODEV;
-
- if (ret == 0) {
- device_create_file(&dev->dev, &dev_attr_id);
- if (dev->irq[0] != NO_IRQ)
- device_create_file(&dev->dev, &dev_attr_irq0);
- if (dev->irq[1] != NO_IRQ)
- device_create_file(&dev->dev, &dev_attr_irq1);
- device_create_file(&dev->dev, &dev_attr_resource);
- } else {
- out:
- release_resource(&dev->res);
- }
+ if (ret)
+ goto err_out;
+
+ tmp = ioremap(dev->res.start, SZ_4K);
+ if (!tmp) {
+ ret = -ENOMEM;
+ goto err_release;
}
+
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
+ for (cid = 0, i = 0; i < 4; i++)
+ cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
+
+ iounmap(tmp);
+
+ if (cid == 0xb105f00d)
+ dev->periphid = pid;
+
+ if (!dev->periphid) {
+ ret = -ENODEV;
+ goto err_release;
+ }
+
+ ret = device_register(&dev->dev);
+ if (ret)
+ goto err_release;
+
+ if (dev->irq[0] != NO_IRQ)
+ ret = device_create_file(&dev->dev, &dev_attr_irq0);
+ if (ret == 0 && dev->irq[1] != NO_IRQ)
+ ret = device_create_file(&dev->dev, &dev_attr_irq1);
+ if (ret == 0)
+ return ret;
+
+ device_unregister(&dev->dev);
+
+ err_release:
+ release_resource(&dev->res);
+ err_out:
return ret;
}
diff --git a/drivers/char/watchdog/at91rm9200_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c
index 4e7a1145e78f..cb86967e2c5f 100644
--- a/drivers/char/watchdog/at91rm9200_wdt.c
+++ b/drivers/char/watchdog/at91rm9200_wdt.c
@@ -21,6 +21,7 @@
#include <linux/watchdog.h>
#include <asm/bitops.h>
#include <asm/uaccess.h>
+#include <asm/arch/at91_st.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 04bee524e31a..90f91d039ee2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -196,11 +196,11 @@ config I2C_IBM_IIC
will be called i2c-ibm_iic.
config I2C_IOP3XX
- tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
- depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C
+ tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
+ depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C
help
Say Y here if you want to use the IIC bus controller on
- the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
+ the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c95a6c154165..c3b1567c852a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -358,133 +358,6 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
#ifdef CONFIG_I2C_PXA_SLAVE
/*
- * I2C EEPROM emulation.
- */
-static struct i2c_eeprom_emu eeprom = {
- .size = I2C_EEPROM_EMU_SIZE,
- .watch = LIST_HEAD_INIT(eeprom.watch),
-};
-
-struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void)
-{
- return &eeprom;
-}
-
-int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *emu, void *data,
- unsigned int addr, unsigned int size,
- struct i2c_eeprom_emu_watcher *watcher)
-{
- struct i2c_eeprom_emu_watch *watch;
- unsigned long flags;
-
- if (addr + size > emu->size)
- return -EINVAL;
-
- watch = kmalloc(sizeof(struct i2c_eeprom_emu_watch), GFP_KERNEL);
- if (watch) {
- watch->start = addr;
- watch->end = addr + size - 1;
- watch->ops = watcher;
- watch->data = data;
-
- local_irq_save(flags);
- list_add(&watch->node, &emu->watch);
- local_irq_restore(flags);
- }
-
- return watch ? 0 : -ENOMEM;
-}
-
-void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *emu, void *data,
- struct i2c_eeprom_emu_watcher *watcher)
-{
- struct i2c_eeprom_emu_watch *watch, *n;
- unsigned long flags;
-
- list_for_each_entry_safe(watch, n, &emu->watch, node) {
- if (watch->ops == watcher && watch->data == data) {
- local_irq_save(flags);
- list_del(&watch->node);
- local_irq_restore(flags);
- kfree(watch);
- }
- }
-}
-
-static void i2c_eeprom_emu_event(void *ptr, i2c_slave_event_t event)
-{
- struct i2c_eeprom_emu *emu = ptr;
-
- eedbg(3, "i2c_eeprom_emu_event: %d\n", event);
-
- switch (event) {
- case I2C_SLAVE_EVENT_START_WRITE:
- emu->seen_start = 1;
- eedbg(2, "i2c_eeprom: write initiated\n");
- break;
-
- case I2C_SLAVE_EVENT_START_READ:
- emu->seen_start = 0;
- eedbg(2, "i2c_eeprom: read initiated\n");
- break;
-
- case I2C_SLAVE_EVENT_STOP:
- emu->seen_start = 0;
- eedbg(2, "i2c_eeprom: received stop\n");
- break;
-
- default:
- eedbg(0, "i2c_eeprom: unhandled event\n");
- break;
- }
-}
-
-static int i2c_eeprom_emu_read(void *ptr)
-{
- struct i2c_eeprom_emu *emu = ptr;
- int ret;
-
- ret = emu->bytes[emu->ptr];
- emu->ptr = (emu->ptr + 1) % emu->size;
-
- return ret;
-}
-
-static void i2c_eeprom_emu_write(void *ptr, unsigned int val)
-{
- struct i2c_eeprom_emu *emu = ptr;
- struct i2c_eeprom_emu_watch *watch;
-
- if (emu->seen_start != 0) {
- eedbg(2, "i2c_eeprom_emu_write: setting ptr %02x\n", val);
- emu->ptr = val;
- emu->seen_start = 0;
- return;
- }
-
- emu->bytes[emu->ptr] = val;
-
- eedbg(1, "i2c_eeprom_emu_write: ptr=0x%02x, val=0x%02x\n",
- emu->ptr, val);
-
- list_for_each_entry(watch, &emu->watch, node) {
- if (!watch->ops || !watch->ops->write)
- continue;
- if (watch->start <= emu->ptr && watch->end >= emu->ptr)
- watch->ops->write(watch->data, emu->ptr, val);
- }
-
- emu->ptr = (emu->ptr + 1) % emu->size;
-}
-
-struct i2c_slave_client eeprom_client = {
- .data = &eeprom,
- .event = i2c_eeprom_emu_event,
- .read = i2c_eeprom_emu_read,
- .write = i2c_eeprom_emu_write
-};
-
-/*
* PXA I2C Slave mode
*/
@@ -963,11 +836,9 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
#ifdef CONFIG_I2C_PXA_SLAVE
- i2c->slave = &eeprom_client;
if (plat) {
i2c->slave_addr = plat->slave_addr;
- if (plat->slave)
- i2c->slave = plat->slave;
+ i2c->slave = plat->slave;
}
#endif
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index f4f8ccaf5455..4224686fdf2a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -91,11 +91,11 @@ config MMC_AU1X
If unsure, say N.
-config MMC_AT91RM9200
- tristate "AT91RM9200 SD/MMC Card Interface support"
- depends on ARCH_AT91RM9200 && MMC
+config MMC_AT91
+ tristate "AT91 SD/MMC Card Interface support"
+ depends on ARCH_AT91 && MMC
help
- This selects the AT91RM9200 MCI controller.
+ This selects the AT91 MCI controller.
If unsure, say N.
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index acfd4de0aba5..83ffb9326a54 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
-obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o
+obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
mmc_core-y := mmc.o mmc_sysfs.o
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6495cd8a9306..4633dbc9a90f 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -73,8 +73,8 @@
#include <asm/mach/mmc.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mci.h>
-#include <asm/arch/at91rm9200_pdc.h>
+#include <asm/arch/at91_mci.h>
+#include <asm/arch/at91_pdc.h>
#define DRIVER_NAME "at91_mci"
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index b6746301d9a9..52d4a38b3667 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -23,9 +23,9 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/arch/at91rm9200.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
/*
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 391a1f4167a4..9217ee6c7865 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/char/at91_serial.c
+ * linux/drivers/char/atmel_serial.c
*
* Driver for Atmel AT91 / AT32 Serial ports
* Copyright (C) 2003 Rick Bronson
@@ -36,11 +36,11 @@
#include <asm/io.h>
-#include <asm/arch/at91rm9200_pdc.h>
#include <asm/mach/serial_at91.h>
#include <asm/arch/board.h>
+#include <asm/arch/at91_pdc.h>
#ifdef CONFIG_ARM
-#include <asm/arch/system.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#endif
@@ -137,8 +137,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int control = 0;
unsigned int mode;
-#ifdef CONFIG_ARM
- if (arch_identify() == ARCH_ID_AT91RM9200) {
+#ifdef CONFIG_ARCH_AT91RM9200
+ if (cpu_is_at91rm9200()) {
/*
* AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
* We need to drive the pin manually.
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
index eced2ad1a8d9..fe1763b2a6d5 100644
--- a/drivers/serial/atmel_serial.h
+++ b/drivers/serial/atmel_serial.h
@@ -31,8 +31,8 @@
#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
-#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable */
-#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */
+#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
+#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
@@ -92,9 +92,9 @@
#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
-#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change */
-#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change */
-#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */
+#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
+#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
+#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
#define ATMEL_US_RI (1 << 20) /* RI */
#define ATMEL_US_DSR (1 << 21) /* DSR */
@@ -106,6 +106,7 @@
#define ATMEL_US_CSR 0x14 /* Channel Status Register */
#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index f9b1719b9a37..9980a4ddfed9 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
- default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+ default y if ARCH_AT91
default y if ARCH_PNX4008
# PPC:
default y if STB03xxx
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bbbc82a8336a..4097a86c4b5e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -189,7 +189,7 @@ config USB_OTG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91RM9200
+ depends on ARCH_AT91
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index a95275a401b1..b28a9b602066 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -945,7 +945,7 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
+#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#endif
@@ -962,8 +962,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
- || defined (CONFIG_ARCH_AT91RM9200) \
- || defined (CONFIG_ARCH_AT91SAM9261) \
+ || defined (CONFIG_ARCH_AT91) \
|| defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
index 24b51cccde8f..9eceb4148922 100644
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ b/include/asm-arm/arch-aaec2000/memory.h
@@ -17,8 +17,6 @@
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
-#ifdef CONFIG_DISCONTIGMEM
-
/*
* The nodes are the followings:
*
@@ -27,42 +25,6 @@
* node 2: 0xf800.0000 - 0xfbff.ffff
* node 3: 0xfc00.0000 - 0xffff.ffff
*/
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
- (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
- (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and return the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and return the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
-
-#define NODE_MAX_MEM_SHIFT 26
-#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT)
-
-#endif /* CONFIG_DISCONTIGMEM */
+#define NODE_MEM_SIZE_BITS 26
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91rm9200/at91_aic.h
new file mode 100644
index 000000000000..267e69812e26
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
+#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
+#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
+#define AT91_AIC_SRCTYPE_LOW (0 << 5)
+#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
+#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
+#define AT91_AIC_SRCTYPE_RISING (3 << 5)
+
+#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
+#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
+#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
+#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
+#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
+#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
+#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
+
+#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
+#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
+#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
+#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
+
+#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91rm9200/at91_dbgu.h
new file mode 100644
index 000000000000..e4b8b27acfca
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_dbgu.h
@@ -0,0 +1,45 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
+#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
+#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
+#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
+#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
+#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
+#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
+#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
+#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
+#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
+#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
+#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
+#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
+#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
+#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
+#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
+#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
+#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
+
+#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h
new file mode 100644
index 000000000000..fddf256a98d3
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_ecc.h
+ *
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef AT91_ECC_H
+#define AT91_ECC_H
+
+#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
+
+#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
+#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define AT91_ECC_PAGESIZE_528 (0)
+#define AT91_ECC_PAGESIZE_1056 (1)
+#define AT91_ECC_PAGESIZE_2112 (2)
+#define AT91_ECC_PAGESIZE_4224 (3)
+
+#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
+#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
+#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
+#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91rm9200/at91_lcdc.h
new file mode 100644
index 000000000000..9cbfcdd3c471
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_lcdc.h
@@ -0,0 +1,148 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_lcdc.h
+ *
+ * LCD Controller (LCDC).
+ * Based on AT91SAM9261 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_LCDC_H
+#define AT91_LCDC_H
+
+#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
+#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
+#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
+#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
+#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
+#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
+
+#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
+#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
+#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
+
+#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
+#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
+#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
+#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
+
+#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
+#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
+#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
+#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
+
+#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
+#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
+#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
+#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
+#define AT91_LCDC_DISTYPE_TFT (2 << 0)
+#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
+#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
+#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
+#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
+#define AT91_LCDC_IFWIDTH_4 (0 << 3)
+#define AT91_LCDC_IFWIDTH_8 (1 << 3)
+#define AT91_LCDC_IFWIDTH_16 (2 << 3)
+#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
+#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
+#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
+#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
+#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
+#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
+#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
+#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
+#define AT91_LCDC_INVVD_NORMAL (0 << 8)
+#define AT91_LCDC_INVVD_INVERTED (1 << 8)
+#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
+#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
+#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
+#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
+#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
+#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
+#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
+#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
+#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
+#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
+#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
+#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
+#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
+#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
+#define AT91_LCDC_MEMOR_BIG (0 << 31)
+#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
+
+#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
+#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
+#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
+#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
+#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
+
+#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
+#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
+#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
+#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
+
+#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
+#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
+#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
+
+#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
+#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
+
+#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
+#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
+#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
+#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
+#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
+#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
+#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
+#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
+#define AT91_LCDC_DP1_2_VAL (0xff)
+#define AT91_LCDC_DP4_7_VAL (0xfffffff)
+#define AT91_LCDC_DP3_5_VAL (0xfffff)
+#define AT91_LCDC_DP2_3_VAL (0xfff)
+#define AT91_LCDC_DP5_7_VAL (0xfffffff)
+#define AT91_LCDC_DP3_4_VAL (0xffff)
+#define AT91_LCDC_DP4_5_VAL (0xfffff)
+#define AT91_LCDC_DP6_7_VAL (0xfffffff)
+
+#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
+#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
+#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
+#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
+
+#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
+#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
+#define AT91_LCDC_PS_DIV1 (0 << 0)
+#define AT91_LCDC_PS_DIV2 (1 << 0)
+#define AT91_LCDC_PS_DIV4 (2 << 0)
+#define AT91_LCDC_PS_DIV8 (3 << 0)
+#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
+#define AT91_LCDC_POL_NEGATIVE (0 << 2)
+#define AT91_LCDC_POL_POSITIVE (1 << 2)
+#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
+#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
+#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
+
+#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
+#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
+
+#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
+#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
+#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
+#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
+#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
+#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
+#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
+#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
+#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
+#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
+#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
+
+#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h b/include/asm-arm/arch-at91rm9200/at91_mci.h
index f28636d61e39..9a552cb743c0 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
+++ b/include/asm-arm/arch-at91rm9200/at91_mci.h
@@ -1,11 +1,11 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mci.h
+ * include/asm-arm/arch-at91rm9200/at91_mci.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision E.
+ * Based on AT91RM9200 datasheet revision F.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -13,8 +13,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_MCI_H
-#define AT91RM9200_MCI_H
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
#define AT91_MCI_CR 0x00 /* Control Register */
#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
@@ -25,10 +25,10 @@
#define AT91_MCI_MR 0x04 /* Mode Register */
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
-#define AT91_MCI_PWSDIV (3 << 8) /* Power Saving Divider */
+#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
-#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
@@ -43,8 +43,8 @@
#define AT91_MCI_DTOMUL_1M (7 << 4)
#define AT91_MCI_SDCR 0x0c /* SD Card Register */
-#define AT91_MCI_SDCSEL (0xf << 0) /* SD Card Selector */
-#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
+#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
+#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
#define AT91_MCI_ARGR 0x10 /* Argument Register */
@@ -78,18 +78,20 @@
#define AT91_MCI_SR 0x40 /* Status Register */
#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
-#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
+#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
+#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
+#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
-#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
+#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
-#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
+#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
diff --git a/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h
index ce1150d4438d..79d6e02fa45e 100644
--- a/include/asm-avr32/arch-at32ap/at91rm9200_pdc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_pdc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+ * include/asm-arm/arch-at91rm9200/at91_pdc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -13,8 +13,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_PDC_H
-#define AT91RM9200_PDC_H
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91rm9200/at91_pio.h
new file mode 100644
index 000000000000..680eaa1f5915
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91rm9200/at91_pit.h
new file mode 100644
index 000000000000..4a30d009c588
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
+
+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
+
+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h
new file mode 100644
index 000000000000..de8c3da74a01
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+
+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
+
+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#define AT91_PMC_DIV (0xff << 0) /* Divider */
+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
+#define AT91_PMC_CSS_SLOW (0 << 0)
+#define AT91_PMC_CSS_MAIN (1 << 0)
+#define AT91_PMC_CSS_PLLA (2 << 0)
+#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_2 (1 << 2)
+#define AT91_PMC_PRES_4 (2 << 2)
+#define AT91_PMC_PRES_8 (3 << 2)
+#define AT91_PMC_PRES_16 (4 << 2)
+#define AT91_PMC_PRES_32 (5 << 2)
+#define AT91_PMC_PRES_64 (6 << 2)
+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+#define AT91_PMC_MDIV_1 (0 << 8)
+#define AT91_PMC_MDIV_2 (1 << 8)
+#define AT91_PMC_MDIV_3 (2 << 8)
+#define AT91_PMC_MDIV_4 (3 << 8)
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+
+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
new file mode 100644
index 000000000000..ccdc52da973d
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
+#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
+#define AT91_RSTC_RSTTYP_USER (4 << 8)
+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h
new file mode 100644
index 000000000000..6e5065d56260
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
+#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
+#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
+#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
+#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
+#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
+#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
+
+#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
+#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
+
+#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
+#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
+#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
+#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
+#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
+
+#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
+#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
+#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
+#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
+#define AT91_RTC_DAY (7 << 21) /* Current Day */
+#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
+
+#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
+#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
+#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
+#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
+
+#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
+#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
+#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
+
+#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
+#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
+#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
+#define AT91_RTC_SECEV (1 << 2) /* Second Event */
+#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
+#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
+
+#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
+#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
+#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
+#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
+
+#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
+#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
+#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
+#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
+#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91rm9200/at91_rtt.h
new file mode 100644
index 000000000000..c6751ba3cccc
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
+#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
+#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
+#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
+#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
+
+#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
+#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
+
+#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
+#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
+
+#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
+#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
+#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91rm9200/at91_shdwc.h
new file mode 100644
index 000000000000..0439250553c9
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_shdwc.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
+#define AT91_SHDW_SHDW (1 << 0) /* Processor Reset */
+#define AT91_SHDW_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
+#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
+#define AT91_SHDW_WKMODE0_NONE 0
+#define AT91_SHDW_WKMODE0_HIGH 1
+#define AT91_SHDW_WKMODE0_LOW 2
+#define AT91_SHDW_WKMODE0_ANYLEVEL 3
+#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
+#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
+#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91_spi.h
index bff5ea45f604..bec48ca89bba 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+++ b/include/asm-arm/arch-at91rm9200/at91_spi.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+ * include/asm-arm/arch-at91rm9200/at91_spi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -13,8 +13,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_SPI_H
-#define AT91RM9200_SPI_H
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
#define AT91_SPI_CR 0x00 /* Control Register */
#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
@@ -28,7 +28,7 @@
#define AT91_SPI_PS_FIXED (0 << 1)
#define AT91_SPI_PS_VARIABLE (1 << 1)
#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection */
+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91_ssc.h
index ac880227147f..694bcaa8f7c2 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_ssc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+ * include/asm-arm/arch-at91rm9200/at91_ssc.h
*
* Copyright (C) SAN People
*
@@ -12,8 +12,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_SSC_H
-#define AT91RM9200_SSC_H
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
#define AT91_SSC_CR 0x00 /* Control Register */
#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
@@ -36,6 +36,10 @@
#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
#define AT91_SSC_CKI_FALLING (0 << 5)
#define AT91_SSC_CK_RISING (1 << 5)
+#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define AT91_SSC_CKG_NONE (0 << 6)
+#define AT91_SSC_CKG_RFLOW (1 << 6)
+#define AT91_SSC_CKG_RFHIGH (2 << 6)
#define AT91_SSC_START (0xf << 8) /* Start Selection */
#define AT91_SSC_START_CONTINUOUS (0 << 8)
#define AT91_SSC_START_TX_RX (1 << 8)
@@ -45,6 +49,7 @@
#define AT91_SSC_START_RISING_RF (5 << 8)
#define AT91_SSC_START_LEVEL_RF (6 << 8)
#define AT91_SSC_START_EDGE_RF (7 << 8)
+#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
@@ -75,6 +80,9 @@
#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
+#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
+
#define AT91_SSC_SR 0x40 /* Status Register */
#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
@@ -84,6 +92,8 @@
#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
+#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
+#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91rm9200/at91_st.h
new file mode 100644
index 000000000000..2432ddfc6c47
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
+#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
+#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
+
+#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
+#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
+#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
+#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
+#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
+
+#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
+#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
+#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
+#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
+#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
+
+#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
+#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
+#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
+
+#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
+#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
+
+#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
+#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91_tc.h
index f4da752bb0c8..8d06eb078e1d 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_tc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+ * include/asm-arm/arch-at91rm9200/at91_tc.h
*
* Copyright (C) SAN People
*
@@ -12,8 +12,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_TC_H
-#define AT91RM9200_TC_H
+#ifndef AT91_TC_H
+#define AT91_TC_H
#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h b/include/asm-arm/arch-at91rm9200/at91_twi.h
index 93547d7482bd..cda914f1e740 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h
+++ b/include/asm-arm/arch-at91rm9200/at91_twi.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_twi.h
+ * include/asm-arm/arch-at91rm9200/at91_twi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -13,8 +13,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_TWI_H
-#define AT91RM9200_TWI_H
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
#define AT91_TWI_CR 0x00 /* Control Register */
#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
@@ -43,8 +43,8 @@
#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
-#define AT91_TWI_OVRE (1 << 6) /* Overrun Error */
-#define AT91_TWI_UNRE (1 << 7) /* Underrun Error */
+#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
+#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91rm9200/at91_wdt.h
new file mode 100644
index 000000000000..ac63e775772c
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
+#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
+#define AT91_WDT_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
+#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
+#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
+#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
+#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
+#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
+#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
+#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
+#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
+
+#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
+#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
+#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index a5a86b1ff886..4d51177efddd 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -80,6 +80,22 @@
/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
+#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
+#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
+
+#define AT91_MATRIX 0 /* not supported */
+
+/*
* Internal Memory.
*/
#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
new file mode 100644
index 000000000000..0c0d81480b3a
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
+#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
+
+#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
+#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
+#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
+#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
+#define AT91_MC_ABTSZ_BYTE (0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
+#define AT91_MC_ABTSZ_WORD (2 << 8)
+#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
+#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
+#define AT91_MC_ABTTYP_FETCH (2 << 10)
+#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
+#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
+#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
+#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
+#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
+#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
+#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
+#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
+
+#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
+#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
+#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
+#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
+#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
+#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
+#define AT91_EBI_CS0A_SMC (0 << 0)
+#define AT91_EBI_CS0A_BFC (1 << 0)
+#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_EBI_CS1A_SMC (0 << 1)
+#define AT91_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
+#define AT91_EBI_CS3A_SMC (0 << 3)
+#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
+#define AT91_EBI_CS4A_SMC (0 << 4)
+#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
+#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
+#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
+#define AT91_SMC_NWS_(x) ((x) << 0)
+#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
+#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
+#define AT91_SMC_TDF_(x) ((x) << 8)
+#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
+#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
+#define AT91_SMC_DBW_16 (1 << 13)
+#define AT91_SMC_DBW_8 (2 << 13)
+#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
+#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
+#define AT91_SMC_ACSS_STD (0 << 16)
+#define AT91_SMC_ACSS_1 (1 << 16)
+#define AT91_SMC_ACSS_2 (2 << 16)
+#define AT91_SMC_ACSS_3 (3 << 16)
+#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
+#define AT91_SMC_RWSETUP_(x) ((x) << 24)
+#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
+#define AT91_SMC_RWHOLD_(x) ((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91_SDRAMC_MODE_NOP (1 << 0)
+#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91_SDRAMC_MODE_LMR (3 << 0)
+#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 4)
+#define AT91_SDRAMC_DBW_16 (1 << 4)
+
+#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
+#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
+#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
+#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
+#define AT91_BFC_BFCOM_DISABLED (0 << 0)
+#define AT91_BFC_BFCOM_ASYNC (1 << 0)
+#define AT91_BFC_BFCOM_BURST (2 << 0)
+#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
+#define AT91_BFC_BFCC_MCK (1 << 2)
+#define AT91_BFC_BFCC_DIV2 (2 << 2)
+#define AT91_BFC_BFCC_DIV4 (3 << 2)
+#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
+#define AT91_BFC_PAGES (7 << 8) /* Page Size */
+#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
+#define AT91_BFC_PAGES_16 (1 << 8)
+#define AT91_BFC_PAGES_32 (2 << 8)
+#define AT91_BFC_PAGES_64 (3 << 8)
+#define AT91_BFC_PAGES_128 (4 << 8)
+#define AT91_BFC_PAGES_256 (5 << 8)
+#define AT91_BFC_PAGES_512 (6 << 8)
+#define AT91_BFC_PAGES_1024 (7 << 8)
+#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
+#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
+#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
+#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
+#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
deleted file mode 100644
index 73693fea76a2..000000000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_SYS_H
-#define AT91RM9200_SYS_H
-
-/*
- * Advanced Interrupt Controller.
- */
-#define AT91_AIC 0x000
-
-#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
-#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
-#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
-#define AT91_AIC_SRCTYPE_LOW (0 << 5)
-#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
-#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
-#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-
-#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
-#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
-#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
-#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
-#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
-#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
-#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-
-#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
-#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
-#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
-#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-
-
-/*
- * Debug Unit.
- */
-#define AT91_DBGU 0x200
-
-#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
-#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
-#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
-#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
-#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
-#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
-#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
-#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
-#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
-#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
-#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
-#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
-#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-
-#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
-
-/*
- * PIO Controllers.
- */
-#define AT91_PIOA 0x400
-#define AT91_PIOB 0x600
-#define AT91_PIOC 0x800
-#define AT91_PIOD 0xa00
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-
-#define AT91_PIO_P(n) (1 << (n))
-
-
-/*
- * Power Management Controller.
- */
-#define AT91_PMC 0xc00
-
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
-#define AT91_PMC_UDP (1 << 1) /* USB Devcice Port Clock */
-#define AT91_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend */
-#define AT91_PMC_UHP (1 << 4) /* USB Host Port Clock */
-#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
-
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
-#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
-#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-#define AT91_PMC_DIV (0xff << 0) /* Divider */
-#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
-#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
-#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
-#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
-#define AT91_PMC_CSS_SLOW (0 << 0)
-#define AT91_PMC_CSS_MAIN (1 << 0)
-#define AT91_PMC_CSS_PLLA (2 << 0)
-#define AT91_PMC_CSS_PLLB (3 << 0)
-#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
-#define AT91_PMC_PRES_2 (1 << 2)
-#define AT91_PMC_PRES_4 (2 << 2)
-#define AT91_PMC_PRES_8 (3 << 2)
-#define AT91_PMC_PRES_16 (4 << 2)
-#define AT91_PMC_PRES_32 (5 << 2)
-#define AT91_PMC_PRES_64 (6 << 2)
-#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
-#define AT91_PMC_MDIV_1 (0 << 8)
-#define AT91_PMC_MDIV_2 (1 << 8)
-#define AT91_PMC_MDIV_3 (2 << 8)
-#define AT91_PMC_MDIV_4 (3 << 8)
-
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
-#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
-#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
-#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-
-
-/*
- * System Timer.
- */
-#define AT91_ST 0xd00
-
-#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
-#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
-#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
-#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
-#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
-#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
-#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
-#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
-#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
-#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
-#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
-#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
-#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
-#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
-#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
-#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
-#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
-#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
-#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
-#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
-#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
-#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
-
-
-/*
- * Real-time Clock.
- */
-#define AT91_RTC 0xe00
-
-#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
-#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
-#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
-#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
-#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
-#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
-#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
-#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
-#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
-#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
-#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
-#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
-
-#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
-#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
-
-#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
-#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
-#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
-#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
-#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
-
-#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
-#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
-#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
-#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
-#define AT91_RTC_DAY (7 << 21) /* Current Day */
-#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
-
-#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
-#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
-#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
-#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
-
-#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
-#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
-#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
-
-#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
-#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
-#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
-#define AT91_RTC_SECEV (1 << 2) /* Second Event */
-#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
-#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
-
-#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
-#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
-#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
-#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
-
-#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
-#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
-#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
-#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
-#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
-
-
-/*
- * Memory Controller.
- */
-#define AT91_MC 0xf00
-
-#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
-#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
-
-#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
-#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
-#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
-#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
-#define AT91_MC_ABTSZ_BYTE (0 << 8)
-#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
-#define AT91_MC_ABTSZ_WORD (2 << 8)
-#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
-#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
-#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
-#define AT91_MC_ABTTYP_FETCH (2 << 10)
-#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
-#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
-#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
-#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
-#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
-#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
-#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
-#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
-
-#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
-#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
-#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
-#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
-#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
-#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
-#define AT91_EBI_CS0A_SMC (0 << 0)
-#define AT91_EBI_CS0A_BFC (1 << 0)
-#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_EBI_CS1A_SMC (0 << 1)
-#define AT91_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
-#define AT91_EBI_CS3A_SMC (0 << 3)
-#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
-#define AT91_EBI_CS4A_SMC (0 << 4)
-#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
-#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
-#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
-#define AT91_SMC_NWS_(x) ((x) << 0)
-#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
-#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
-#define AT91_SMC_TDF_(x) ((x) << 8)
-#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
-#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
-#define AT91_SMC_DBW_16 (1 << 13)
-#define AT91_SMC_DBW_8 (2 << 13)
-#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
-#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
-#define AT91_SMC_ACSS_STD (0 << 16)
-#define AT91_SMC_ACSS_1 (1 << 16)
-#define AT91_SMC_ACSS_2 (2 << 16)
-#define AT91_SMC_ACSS_3 (3 << 16)
-#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
-#define AT91_SMC_RWSETUP_(x) ((x) << 24)
-#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
-#define AT91_SMC_RWHOLD_(x) ((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91_SDRAMC_MODE_NOP (1 << 0)
-#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91_SDRAMC_MODE_LMR (3 << 0)
-#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 4)
-#define AT91_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
-#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
-#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
-#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
-#define AT91_BFC_BFCOM_DISABLED (0 << 0)
-#define AT91_BFC_BFCOM_ASYNC (1 << 0)
-#define AT91_BFC_BFCOM_BURST (2 << 0)
-#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
-#define AT91_BFC_BFCC_MCK (1 << 2)
-#define AT91_BFC_BFCC_DIV2 (2 << 2)
-#define AT91_BFC_BFCC_DIV4 (3 << 2)
-#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
-#define AT91_BFC_PAGES (7 << 8) /* Page Size */
-#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
-#define AT91_BFC_PAGES_16 (1 << 8)
-#define AT91_BFC_PAGES_32 (2 << 8)
-#define AT91_BFC_PAGES_64 (3 << 8)
-#define AT91_BFC_PAGES_128 (4 << 8)
-#define AT91_BFC_PAGES_256 (5 << 8)
-#define AT91_BFC_PAGES_512 (6 << 8)
-#define AT91_BFC_PAGES_1024 (7 << 8)
-#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
-#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
-#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
-#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
-#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
deleted file mode 100644
index 951e3f61cef4..000000000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USB Device Port (UDP) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_UDP_H
-#define AT91RM9200_UDP_H
-
-#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
-#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
-#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
-#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
-
-#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
-#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
-#define AT91_UDP_CONFG (1 << 1) /* Configured */
-#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
-#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
-#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
-
-#define AT91_UDP_FADDR 0x08 /* Function Address Register */
-#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
-#define AT91_UDP_FEN (1 << 8) /* Function Enable */
-
-#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
-#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
-#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
-
-#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
-#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
-#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
-#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
-#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
-#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
-#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
-#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
-
-#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
-#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
-
-#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */
-#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
-#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
-#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
-#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
-#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
-#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
-#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
-#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
-#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
-#define AT91_UDP_EPTYPE_CTRL (0 << 8)
-#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
-#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
-#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
-#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
-#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
-#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
-#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
-#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
-#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
-
-#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */
-
-#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
-#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91rm9200/at91sam9260.h
new file mode 100644
index 000000000000..46f4dd65c035
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91sam9260.h
@@ -0,0 +1,125 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0 6 /* USART 0 */
+#define AT91SAM9260_ID_US1 7 /* USART 1 */
+#define AT91SAM9260_ID_US2 8 /* USART 2 */
+#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP 20 /* USB Host port */
+#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
+#define AT91SAM9260_ID_US3 23 /* USART 3 */
+#define AT91SAM9260_ID_US4 24 /* USART 4 */
+#define AT91SAM9260_ID_US5 25 /* USART 5 */
+#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0 0xfffa0000
+#define AT91SAM9260_BASE_TC0 0xfffa0000
+#define AT91SAM9260_BASE_TC1 0xfffa0040
+#define AT91SAM9260_BASE_TC2 0xfffa0080
+#define AT91SAM9260_BASE_UDP 0xfffa4000
+#define AT91SAM9260_BASE_MCI 0xfffa8000
+#define AT91SAM9260_BASE_TWI 0xfffac000
+#define AT91SAM9260_BASE_US0 0xfffb0000
+#define AT91SAM9260_BASE_US1 0xfffb4000
+#define AT91SAM9260_BASE_US2 0xfffb8000
+#define AT91SAM9260_BASE_SSC 0xfffbc000
+#define AT91SAM9260_BASE_ISI 0xfffc0000
+#define AT91SAM9260_BASE_EMAC 0xfffc4000
+#define AT91SAM9260_BASE_SPI0 0xfffc8000
+#define AT91SAM9260_BASE_SPI1 0xfffcc000
+#define AT91SAM9260_BASE_US3 0xfffd0000
+#define AT91SAM9260_BASE_US4 0xfffd4000
+#define AT91SAM9260_BASE_US5 0xfffd8000
+#define AT91SAM9260_BASE_TCB1 0xfffdc000
+#define AT91SAM9260_BASE_TC3 0xfffdc000
+#define AT91SAM9260_BASE_TC4 0xfffdc040
+#define AT91SAM9260_BASE_TC5 0xfffdc080
+#define AT91SAM9260_BASE_ADC 0xfffe0000
+#define AT91_BASE_SYS 0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
new file mode 100644
index 000000000000..746d973705bf
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91rm9200/at91sam9261.h
new file mode 100644
index 000000000000..8d39672d5b82
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91sam9261.h
@@ -0,0 +1,292 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0 6 /* USART 0 */
+#define AT91SAM9261_ID_US1 7 /* USART 1 */
+#define AT91SAM9261_ID_US2 8 /* USART 2 */
+#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP 20 /* USB Host port */
+#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
+#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0 0xfffa0000
+#define AT91SAM9261_BASE_TC0 0xfffa0000
+#define AT91SAM9261_BASE_TC1 0xfffa0040
+#define AT91SAM9261_BASE_TC2 0xfffa0080
+#define AT91SAM9261_BASE_UDP 0xfffa4000
+#define AT91SAM9261_BASE_MCI 0xfffa8000
+#define AT91SAM9261_BASE_TWI 0xfffac000
+#define AT91SAM9261_BASE_US0 0xfffb0000
+#define AT91SAM9261_BASE_US1 0xfffb4000
+#define AT91SAM9261_BASE_US2 0xfffb8000
+#define AT91SAM9261_BASE_SSC0 0xfffbc000
+#define AT91SAM9261_BASE_SSC1 0xfffc0000
+#define AT91SAM9261_BASE_SSC2 0xfffc4000
+#define AT91SAM9261_BASE_SPI0 0xfffc8000
+#define AT91SAM9261_BASE_SPI1 0xfffcc000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */
+#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */
+#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */
+#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */
+#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */
+#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */
+#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */
+#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */
+#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */
+#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */
+#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */
+#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */
+#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */
+#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */
+#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */
+#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */
+#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */
+#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */
+#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */
+#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */
+#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */
+#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */
+#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */
+#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */
+#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */
+#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */
+#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */
+#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */
+#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */
+#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */
+#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */
+#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */
+#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */
+#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */
+#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */
+#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */
+#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */
+#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */
+#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */
+#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */
+#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */
+#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */
+#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */
+#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */
+#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */
+#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */
+#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */
+#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */
+#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */
+#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */
+#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */
+#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */
+#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */
+#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */
+#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */
+
+#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */
+#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */
+#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */
+#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */
+#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */
+#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */
+#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */
+#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */
+#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */
+#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */
+#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */
+#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */
+#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */
+#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */
+#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */
+#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */
+#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */
+#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */
+#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */
+#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */
+#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */
+#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */
+#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */
+#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */
+#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */
+#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */
+#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */
+#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */
+#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */
+#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */
+#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */
+#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */
+#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */
+#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */
+#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */
+#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */
+#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */
+#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */
+#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */
+#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */
+#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */
+#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */
+#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */
+#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */
+#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */
+#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */
+#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */
+#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */
+#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */
+#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */
+#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */
+#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */
+#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */
+#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */
+#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */
+#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */
+#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */
+#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */
+#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */
+#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */
+#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */
+
+#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */
+#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */
+#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */
+#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */
+#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */
+#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */
+#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */
+#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */
+#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */
+#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */
+#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */
+#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */
+#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */
+#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */
+#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */
+#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */
+#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */
+#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */
+#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */
+#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */
+#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */
+#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */
+#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */
+#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */
+#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */
+#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */
+#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */
+#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */
+#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */
+#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */
+#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */
+#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */
+#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
+#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */
+#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
+#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */
+#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
+#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */
+#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
+#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */
+#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
+#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */
+#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
+#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */
+#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */
+#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */
+#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */
+#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */
+#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */
+#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */
+#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */
+#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */
+#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */
+#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */
+#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */
+#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */
+#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
new file mode 100644
index 000000000000..270a5dcdf1cd
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
new file mode 100644
index 000000000000..7d94968b5d57
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
@@ -0,0 +1,134 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL 0
+#define AT91_SDRAMC_MODE_NOP 1
+#define AT91_SDRAMC_MODE_PRECHARGE 2
+#define AT91_SDRAMC_MODE_LMR 3
+#define AT91_SDRAMC_MODE_REFRESH 4
+#define AT91_SDRAMC_MODE_EXT_LMR 5
+#define AT91_SDRAMC_MODE_DEEP 6
+
+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_1 (1 << 5)
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_CAS_3 (3 << 5)
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 7)
+#define AT91_SDRAMC_DBW_16 (1 << 7)
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_SDRAMC_LPCB_DISABLE 0
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+#define AT91_SDRAMC_MD_SDRAM 0
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+
+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+
+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 5)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 5)
+#define AT91_SMC_EXNWMODE_READY (3 << 5)
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+#define AT91_SMC_TDF_(x) ((x) << 16)
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+#define AT91_SMC_PS (3 << 28) /* Page Size */
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
index 3cc9aec80f9d..768e0fc6aa2f 100644
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91rm9200/board.h
@@ -48,13 +48,14 @@ struct at91_cf_data {
u8 det_pin; /* Card detect */
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
+ u8 chipselect; /* EBI Chip Select number */
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
struct at91_mmc_data {
u8 det_pin; /* card detect IRQ */
- unsigned is_b:1; /* uses B side (vs A) */
+ unsigned slot_b:1; /* uses Slot B */
unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
u8 wp_pin; /* (SD) writeprotect detect */
u8 vcc_pin; /* power switching (high == on) */
@@ -81,7 +82,8 @@ struct at91_nand_data {
u8 rdy_pin; /* ready/busy */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
- struct mtd_partition* (*partition_info)(int, int*);
+ u8 bus_width_16; /* buswidth is 16 bit */
+ struct mtd_partition* (*partition_info)(int, int*);
};
extern void __init at91_add_device_nand(struct at91_nand_data *data);
diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91rm9200/cpu.h
new file mode 100644
index 000000000000..6f8d09b08692
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/cpu.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91rm9200/cpu.h
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200 0x09290780
+#define ARCH_ID_AT91SAM9260 0x019803a0
+#define ARCH_ID_AT91SAM9261 0x019703a0
+
+
+static inline unsigned long at91_cpu_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#else
+#define cpu_is_at91sam9260() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261() (0)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S
index f496b54c4c3e..85cdadf26634 100644
--- a/include/asm-arm/arch-at91rm9200/debug-macro.S
+++ b/include/asm-arm/arch-at91rm9200/debug-macro.S
@@ -12,6 +12,7 @@
*/
#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S
index 61a326e94909..57248a796472 100644
--- a/include/asm-arm/arch-at91rm9200/entry-macro.S
+++ b/include/asm-arm/arch-at91rm9200/entry-macro.S
@@ -11,6 +11,7 @@
*/
#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
.macro disable_fiq
.endm
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 9ca4cc9c0b2e..9ea5bfe06320 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -16,8 +16,16 @@
#include <asm/sizes.h>
+#if defined(CONFIG_ARCH_AT91RM9200)
#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_sys.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
/*
* Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
@@ -34,29 +42,27 @@
* Virtual to Physical Address mapping for IO devices.
*/
#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI)
#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI)
-#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI)
-#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP)
/* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
+#define AT91_SRAM_MAX SZ_1M
+#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
/* Serial ports */
-#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */
-
-/* FLASH */
-#define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */
+#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0 0x10000000
+#define AT91_CHIPSELECT_1 0x20000000
+#define AT91_CHIPSELECT_2 0x30000000
+#define AT91_CHIPSELECT_3 0x40000000
+#define AT91_CHIPSELECT_4 0x50000000
+#define AT91_CHIPSELECT_5 0x60000000
+#define AT91_CHIPSELECT_6 0x70000000
+#define AT91_CHIPSELECT_7 0x80000000
/* SDRAM */
-#define AT91_SDRAM_BASE 0x20000000 /* NCS1: SDRAM physical base address */
-
-/* SmartMedia */
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3: Smartmedia physical base address */
-
-/* Compact Flash */
-#define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */
+#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
index 763cb96c418b..c0679eaefaf2 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91rm9200/irqs.h
@@ -21,6 +21,8 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
+#include <asm/arch/at91_aic.h>
+
#define NR_AIC_IRQS 32
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h
index 8a2ff472e4cf..9c67130603b2 100644
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ b/include/asm-arm/arch-at91rm9200/system.h
@@ -22,6 +22,8 @@
#define __ASM_ARCH_SYSTEM_H
#include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
static inline void arch_idle(void)
{
@@ -39,21 +41,13 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
-{
- /*
- * Perform a hardware reset with the use of the Watchdog timer.
- */
- at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
- at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-#define ARCH_ID_AT91RM9200 0x09200080
-#define ARCH_ID_AT91SAM9261 0x019000a0
+void (*at91_arch_reset)(void);
-static inline unsigned long arch_identify(void)
+static inline void arch_reset(char mode)
{
- return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH);
+ /* call the CPU-specific reset function */
+ if (at91_arch_reset)
+ (at91_arch_reset)();
}
#endif
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h
index 88687cefe6eb..faeca45a8d44 100644
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ b/include/asm-arm/arch-at91rm9200/timex.h
@@ -23,6 +23,15 @@
#include <asm/hardware.h>
+#if defined(CONFIG_ARCH_AT91RM9200)
+
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK 99300000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#endif
+
#endif
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h
index ec7811ab0a52..34b4b93fa015 100644
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ b/include/asm-arm/arch-at91rm9200/uncompress.h
@@ -22,11 +22,11 @@
#define __ASM_ARCH_UNCOMPRESS_H
#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
/*
* The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
+ * initialized by the bootloader. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*
* This does not append a newline
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h
index 4c367eb57f47..0a23b8c562b9 100644
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ b/include/asm-arm/arch-at91rm9200/vmalloc.h
@@ -21,6 +21,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK)
+#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
#endif
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
index c6e8dcf674de..42768cc8bfb4 100644
--- a/include/asm-arm/arch-clps711x/memory.h
+++ b/include/asm-arm/arch-clps711x/memory.h
@@ -62,7 +62,15 @@
* memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM.
*/
-#ifdef CONFIG_DISCONTIGMEM
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1). However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much more convenient to use Linux's NUMA support to implement
@@ -80,48 +88,7 @@
* node 2: 0xd0000000 - 0xd7ffffff
* node 3: 0xd8000000 - 0xdfffffff
*/
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
- (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
- (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) \
- NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
-
-#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-/*
- * Given a kaddr, LOCAL_MAR_NR finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1). However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-#define NODE_MAX_MEM_SHIFT 24
-#define NODE_MAX_MEM_SIZE (1<<NODE_MAX_MEM_SHIFT)
-
-#endif /* CONFIG_DISCONTIGMEM */
+#define NODE_MEM_SIZE_BITS 24
#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h
index 8c91674706b1..e22ba789546c 100644
--- a/include/asm-arm/arch-imx/timex.h
+++ b/include/asm-arm/arch-imx/timex.h
@@ -21,7 +21,6 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
-#include <asm/hardware.h>
-#define CLOCK_TICK_RATE (CLK32)
+#define CLOCK_TICK_RATE (16000000)
#endif
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
new file mode 100644
index 000000000000..788b4e386c16
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-iop13xx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ mmu enabled?
+ moveq \rx, #0xff000000 @ physical
+ orreq \rx, \rx, #0x00d80000
+ movne \rx, #0xfe000000 @ virtual
+ orrne \rx, \rx, #0x00e80000
+ orr \rx, \rx, #0x00002300
+ orr \rx, \rx, #0x00000040
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h
new file mode 100644
index 000000000000..2e15da53ff79
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/dma.h
@@ -0,0 +1,3 @@
+#ifndef _IOP13XX_DMA_H
+#define _IOP13XX_DMA_H_
+#endif
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/include/asm-arm/arch-iop13xx/entry-macro.S
new file mode 100644
index 000000000000..94c50283dc56
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * iop13xx low level irq macros
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+ .macro disable_fiq
+ .endm
+
+ /*
+ * Note: a 1-cycle window exists where iintvec will return the value
+ * of iintbase, so we explicitly check for "bad zeros"
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mrc p15, 0, \tmp, c15, c1, 0
+ orr \tmp, \tmp, #(1 << 6)
+ mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
+
+ mrc p6, 0, \irqnr, c3, c2, 0 @ Read IINTVEC
+ cmp \irqnr, #0
+ mrceq p6, 0, \irqnr, c3, c2, 0 @ Re-read on potentially bad zero
+ adds \irqstat, \irqnr, #1 @ Check for 0xffffffff
+ movne \irqnr, \irqnr, lsr #2 @ Convert to irqnr
+
+ biceq \tmp, \tmp, #(1 << 6)
+ mcreq p15, 0, \tmp, c15, c1, 0 @ Disable cp6 access if no more interrupts
+ .endm
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/include/asm-arm/arch-iop13xx/hardware.h
new file mode 100644
index 000000000000..8e1d56289846
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/hardware.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+#include <asm/types.h>
+
+#define pcibios_assign_all_busses() 1
+
+#ifndef __ASSEMBLY__
+extern unsigned long iop13xx_pcibios_min_io;
+extern unsigned long iop13xx_pcibios_min_mem;
+extern u16 iop13xx_dev_id(void);
+extern void iop13xx_set_atu_mmr_bases(void);
+#endif
+
+#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io)
+#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem)
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop13xx.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq81340.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
new file mode 100644
index 000000000000..db6de2480a24
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/io.h
@@ -0,0 +1,41 @@
+/*
+ * iop13xx custom ioremap implementation
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) (a)
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags);
+extern void __iop13xx_iounmap(void __iomem *addr);
+
+extern u32 iop13xx_atue_mem_base;
+extern u32 iop13xx_atux_mem_base;
+extern size_t iop13xx_atue_mem_size;
+extern size_t iop13xx_atux_mem_size;
+
+#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop13xx_iounmap(a)
+
+#endif
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
new file mode 100644
index 000000000000..a88522a0ff8e
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -0,0 +1,492 @@
+#ifndef _IOP13XX_HW_H_
+#define _IOP13XX_HW_H_
+
+#ifndef __ASSEMBLY__
+/* The ATU offsets can change based on the strapping */
+extern u32 iop13xx_atux_pmmr_offset;
+extern u32 iop13xx_atue_pmmr_offset;
+void iop13xx_init_irq(void);
+void iop13xx_map_io(void);
+void iop13xx_platform_init(void);
+void iop13xx_init_irq(void);
+void iop13xx_init_time(unsigned long tickrate);
+unsigned long iop13xx_gettimeoffset(void);
+
+/* handle cp6 access
+ * to do: handle access in entry-armv5.S and unify with
+ * the iop3xx implementation
+ * note: use iop13xx_cp6_enable_irq_save and iop13xx_cp6_irq_restore (irq.h)
+ * when interrupts are enabled
+ */
+static inline unsigned long iop13xx_cp6_save(void)
+{
+ u32 temp, cp_flags;
+
+ asm volatile (
+ "mrc p15, 0, %1, c15, c1, 0\n\t"
+ "orr %0, %1, #(1 << 6)\n\t"
+ "mcr p15, 0, %0, c15, c1, 0\n\t"
+ : "=r" (temp), "=r"(cp_flags));
+
+ return cp_flags;
+}
+
+static inline void iop13xx_cp6_restore(unsigned long cp_flags)
+{
+ asm volatile (
+ "mcr p15, 0, %0, c15, c1, 0\n\t"
+ : : "r" (cp_flags) );
+}
+
+/* CPUID CP6 R0 Page 0 */
+static inline int iop13xx_cpu_id(void)
+{
+ int id;
+ asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
+ return id;
+}
+
+#endif
+
+/*
+ * IOP13XX I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */
+#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE
+
+/* PCI MAP
+ * 0x0000.0000 - 0x8000.0000 1:1 mapping with Physical RAM
+ * 0x8000.0000 - 0x8800.0000 PCIX/PCIE memory window (128MB)
+*/
+#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL
+#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
+#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL
+#define IOP13XX_PCIX_LOWER_IO_BA 0x0fff0000UL
+#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\
+ IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\
+ IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_IO_OFFSET (IOP13XX_PCIX_LOWER_IO_VA -\
+ IOP13XX_PCIX_LOWER_IO_BA)
+#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+ (IOP13XX_PCIX_LOWER_IO_PA\
+ - IOP13XX_PCIX_LOWER_IO_VA))
+
+#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
+#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
+#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
+ IOP13XX_PCIX_LOWER_MEM_BA)
+#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\
+ IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\
+ IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+
+#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL
+#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE
+#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\
+ IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\
+ IOP13XX_PCIX_LOWER_MEM_BA)
+
+/* PCI-E ranges */
+#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL
+#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
+#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL
+#define IOP13XX_PCIE_LOWER_IO_BA 0x0fff0000UL
+#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\
+ IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\
+ IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\
+ IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_IO_OFFSET (IOP13XX_PCIE_LOWER_IO_VA -\
+ IOP13XX_PCIE_LOWER_IO_BA)
+#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+ (IOP13XX_PCIE_LOWER_IO_PA\
+ - IOP13XX_PCIE_LOWER_IO_VA))
+
+#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
+#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
+#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
+ IOP13XX_PCIE_LOWER_MEM_BA)
+#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\
+ IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\
+ IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+
+/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
+#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL
+#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE
+#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\
+ IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\
+ IOP13XX_PCIE_LOWER_MEM_BA)
+
+/* PBI Ranges */
+#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL
+#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL
+#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL
+#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE
+#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\
+ IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
+
+/*
+ * IOP13XX chipset registers
+ */
+#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE 0xfee80000UL /* PMMR phys. address */
+#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000
+#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\
+ IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\
+ IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (u32) ((u32) addr +\
+ (IOP13XX_PMMR_PHYS_MEM_BASE\
+ - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+ (IOP13XX_PMMR_PHYS_MEM_BASE\
+ - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_PMMR_SIZE 0x00080000
+
+/*=================== Defines for Platform Devices =====================*/
+#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+
+#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
+#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
+
+/* ATU selection flags */
+/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
+#define IOP13XX_INIT_ATU_DEFAULT (0)
+#define IOP13XX_INIT_ATU_ATUX (1 << 0)
+#define IOP13XX_INIT_ATU_ATUE (1 << 1)
+#define IOP13XX_INIT_ATU_NONE (1 << 2)
+
+/* UART selection flags */
+/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
+#define IOP13XX_INIT_UART_DEFAULT (0)
+#define IOP13XX_INIT_UART_0 (1 << 0)
+#define IOP13XX_INIT_UART_1 (1 << 1)
+
+/* I2C selection flags */
+/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
+#define IOP13XX_INIT_I2C_DEFAULT (0)
+#define IOP13XX_INIT_I2C_0 (1 << 0)
+#define IOP13XX_INIT_I2C_1 (1 << 1)
+#define IOP13XX_INIT_I2C_2 (1 << 2)
+
+#define IQ81340_NUM_UART 2
+#define IQ81340_NUM_I2C 3
+#define IQ81340_NUM_PHYS_MAP_FLASH 1
+#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART +\
+ IQ81340_NUM_I2C +\
+ IQ81340_NUM_PHYS_MAP_FLASH)
+
+/*========================== PMMR offsets for key registers ============*/
+#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000
+#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000
+#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000
+#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000
+#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
+#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
+#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
+#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
+#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
+
+#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */
+#define IOP13XX_CONTROLLER_ONLY (1 << 14)
+#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15)
+
+#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000
+#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\
+ IOP13XX_PMON_PMMR_OFFSET)
+#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\
+ IOP13XX_PMON_PMMR_OFFSET)
+
+#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0)
+#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4)
+#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8)
+#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC)
+
+#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30)
+#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34)
+#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38)
+#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C)
+
+#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70)
+#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74)
+#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78)
+#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C)
+
+#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
+#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
+
+/*================================ATU===================================*/
+#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\
+ iop13xx_atux_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\
+ iop13xx_atux_pmmr_offset + 0x2)
+
+#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\
+ iop13xx_atux_pmmr_offset + 0x4)
+#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\
+ iop13xx_atux_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10)
+#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14)
+#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18)
+#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c)
+#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20)
+#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24)
+#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40)
+#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44)
+#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48)
+#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c)
+#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50)
+#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54)
+#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58)
+#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c)
+#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60)
+#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70)
+#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74)
+#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78)
+#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4)
+#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200)
+#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204)
+#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208)
+#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c)
+#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210)
+
+#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300)
+#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304)
+#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308)
+#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c)
+#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310)
+#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314)
+#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318)
+#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c)
+#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320)
+#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324)
+#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328)
+#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c)
+#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330)
+#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334)
+
+#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1)
+#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25)
+#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21)
+#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15)
+#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14)
+#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16)
+
+#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18)
+#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17)
+#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16)
+#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15)
+#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14)
+#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13)
+#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12)
+#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11)
+#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10)
+#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 )
+#define IOP13XX_ATUX_STAT_BIST (1 << 8 )
+#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 )
+#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 )
+#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 )
+#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 )
+#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 )
+#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 )
+
+#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8)
+#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3)
+#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0)
+
+#define IOP13XX_ATUX_IALR_DISABLE 0x00000001
+#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000
+
+#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\
+ iop13xx_atue_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\
+ iop13xx_atue_pmmr_offset + 0x2)
+#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\
+ iop13xx_atue_pmmr_offset + 0x4)
+#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\
+ iop13xx_atue_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10)
+#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14)
+#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18)
+#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c)
+#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20)
+#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24)
+#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40)
+#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44)
+#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48)
+#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c)
+#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50)
+#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54)
+#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58)
+#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c)
+#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60)
+#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\
+ iop13xx_atue_pmmr_offset + 0xe2)
+#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304)
+#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308)
+#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c)
+#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310)
+#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314)
+#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318)
+#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c)
+#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320)
+#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324)
+
+#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70)
+#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74)
+#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78)
+#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300)
+#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c)
+#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330)
+
+#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384)
+#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388)
+
+#define IOP13XX_ATUE_ATUCR_IVM (1 << 6)
+#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1)
+#define IOP13XX_ATUE_OCCAR_BUS_NUM (24)
+#define IOP13XX_ATUE_OCCAR_DEV_NUM (19)
+#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16)
+#define IOP13XX_ATUE_OCCAR_EXT_REG (8)
+#define IOP13XX_ATUE_OCCAR_REG (2)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM (24)
+#define IOP13XX_ATUE_PCSR_DEV_NUM (19)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
+#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15)
+#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14)
+#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13)
+#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff)
+#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7)
+
+#define IOP13XX_ATUE_PCSR_CORE_RESET (8)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
+
+#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11)
+#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28)
+#define IOP13XX_ATUE_STAT_PME (1 << 27)
+#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26)
+#define IOP13XX_ATUE_STAT_IVM (1 << 25)
+#define IOP13XX_ATUE_STAT_BIST (1 << 24)
+#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18)
+#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17)
+#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16)
+#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13)
+#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12)
+#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11)
+#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10)
+#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 )
+#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 )
+#define IOP13XX_ATUE_STAT_CRS (1 << 7 )
+#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 )
+#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 )
+#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 )
+#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 )
+#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 )
+#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 )
+#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 )
+
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31)
+#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30)
+#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29)
+#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28)
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20)
+#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19)
+#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18)
+#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17)
+#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16)
+#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15)
+#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14)
+#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13)
+#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12)
+#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 )
+#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 )
+
+#define IOP13XX_ATUE_IALR_DISABLE (0x00000001)
+#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
+/*=======================================================================*/
+
+/*==============================ADMA UNITS===============================*/
+#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
+#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
+#define IOP13XX_ADMA_OFFSET(chan, ofs) IOP13XX_REG_ADDR32((chan << 9) + (ofs))
+
+#define IOP13XX_ADMA_ACCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x0)
+#define IOP13XX_ADMA_ACSR(chan) IOP13XX_ADMA_OFFSET(chan, 0x4)
+#define IOP13XX_ADMA_ADAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x8)
+#define IOP13XX_ADMA_IIPCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x18)
+#define IOP13XX_ADMA_IIPAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x1c)
+#define IOP13XX_ADMA_IIPUAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x20)
+#define IOP13XX_ADMA_ANDAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x24)
+#define IOP13XX_ADMA_ADCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x28)
+#define IOP13XX_ADMA_CARMD(chan) IOP13XX_ADMA_OFFSET(chan, 0x2c)
+#define IOP13XX_ADMA_ABCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x30)
+#define IOP13XX_ADMA_DLADR(chan) IOP13XX_ADMA_OFFSET(chan, 0x34)
+#define IOP13XX_ADMA_DUADR(chan) IOP13XX_ADMA_OFFSET(chan, 0x38)
+#define IOP13XX_ADMA_SLAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x3c + (src <<3))
+#define IOP13XX_ADMA_SUAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x40 + (src <<3))
+
+/*==============================XSI BRIDGE===============================*/
+#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c)
+#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790)
+#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794)
+#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
+ IOP13XX_PMMR_VIRT_TO_PHYS(\
+ IOP13XX_ATUE_OCCDR))\
+ && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
+ IOP13XX_PMMR_VIRT_TO_PHYS(\
+ IOP13XX_ATUX_OCCDR))\
+ && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+/*=======================================================================*/
+
+#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
+ (ofs))
+
+#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0)
+#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4)
+#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8)
+#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc)
+#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10)
+#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14)
+
+#define IOP13XX_TMR_TC 0x01
+#define IOP13XX_TMR_EN 0x02
+#define IOP13XX_TMR_RELOAD 0x04
+#define IOP13XX_TMR_PRIVILEGED 0x08
+
+#define IOP13XX_TMR_RATIO_1_1 0x00
+#define IOP13XX_TMR_RATIO_4_1 0x10
+#define IOP13XX_TMR_RATIO_8_1 0x20
+#define IOP13XX_TMR_RATIO_16_1 0x30
+
+#endif /* _IOP13XX_HW_H_ */
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h
new file mode 100644
index 000000000000..b98f8f109c22
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/iq81340.h
@@ -0,0 +1,31 @@
+#ifndef _IQ81340_H_
+#define _IQ81340_H_
+
+#define IQ81340_PCE_BAR0 IOP13XX_PBI_LOWER_MEM_RA
+#define IQ81340_PCE_BAR1 (IQ81340_PCE_BAR0 + 0x02000000)
+
+#define IQ81340_FLASHBASE IQ81340_PCE_BAR0 /* Flash */
+
+#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
+
+#define IQ81340_PRD_CODE IQ81340_PCE_BAR1_OFFSET(0)
+#define IQ81340_BRD_STEP IQ81340_PCE_BAR1_OFFSET(0x10000)
+#define IQ81340_CPLD_REV IQ81340_PCE_BAR1_OFFSET(0x20000)
+#define IQ81340_LED IQ81340_PCE_BAR1_OFFSET(0x30000)
+#define IQ81340_LHEX IQ81340_PCE_BAR1_OFFSET(0x40000)
+#define IQ81340_RHEX IQ81340_PCE_BAR1_OFFSET(0x50000)
+#define IQ81340_BUZZER IQ81340_PCE_BAR1_OFFSET(0x60000)
+#define IQ81340_32K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x70000)
+#define IQ81340_256K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x80000)
+#define IQ81340_ROTARY_SW IQ81340_PCE_BAR1_OFFSET(0xd0000)
+#define IQ81340_BATT_STAT IQ81340_PCE_BAR1_OFFSET(0xf0000)
+#define IQ81340_CMP_FLSH IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
+
+#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH)
+#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1)
+
+/* These are the values used in the Machine description */
+#define PHYS_IO 0xfeffff00
+#define IO_PG_OFFSET 0xffffff00
+#define BOOT_PARAM_OFFSET 0x00000100
+#endif /* _IQ81340_H_ */
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
new file mode 100644
index 000000000000..442e35a40359
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/irqs.h
@@ -0,0 +1,207 @@
+#ifndef _IOP13XX_IRQS_H_
+#define _IOP13XX_IRQS_H_
+
+#ifndef __ASSEMBLER__
+#include <linux/types.h>
+#include <asm/system.h> /* local_irq_save */
+#include <asm/arch/iop13xx.h> /* iop13xx_cp6_* */
+
+/* INTPND0 CP6 R0 Page 3
+ */
+static inline u32 read_intpnd_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
+ return val;
+}
+
+/* INTPND1 CP6 R1 Page 3
+ */
+static inline u32 read_intpnd_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
+ return val;
+}
+
+/* INTPND2 CP6 R2 Page 3
+ */
+static inline u32 read_intpnd_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
+ return val;
+}
+
+/* INTPND3 CP6 R3 Page 3
+ */
+static inline u32 read_intpnd_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
+ return val;
+}
+
+static inline void
+iop13xx_cp6_enable_irq_save(unsigned long *cp_flags, unsigned long *irq_flags)
+{
+ local_irq_save(*irq_flags);
+ *cp_flags = iop13xx_cp6_save();
+}
+
+static inline void
+iop13xx_cp6_irq_restore(unsigned long *cp_flags,
+ unsigned long *irq_flags)
+{
+ iop13xx_cp6_restore(*cp_flags);
+ local_irq_restore(*irq_flags);
+}
+#endif
+
+#define INTBASE 0
+#define INTSIZE_4 1
+
+/*
+ * iop34x chipset interrupts
+ */
+#define IOP13XX_IRQ(x) (IOP13XX_IRQ_OFS + (x))
+
+/*
+ * On IRQ or FIQ register
+ */
+#define IRQ_IOP13XX_ADMA0_EOT (0)
+#define IRQ_IOP13XX_ADMA0_EOC (1)
+#define IRQ_IOP13XX_ADMA1_EOT (2)
+#define IRQ_IOP13XX_ADMA1_EOC (3)
+#define IRQ_IOP13XX_ADMA2_EOT (4)
+#define IRQ_IOP13XX_ADMA2_EOC (5)
+#define IRQ_IOP134_WATCHDOG (6)
+#define IRQ_IOP13XX_RSVD_7 (7)
+#define IRQ_IOP13XX_TIMER0 (8)
+#define IRQ_IOP13XX_TIMER1 (9)
+#define IRQ_IOP13XX_I2C_0 (10)
+#define IRQ_IOP13XX_I2C_1 (11)
+#define IRQ_IOP13XX_MSG (12)
+#define IRQ_IOP13XX_MSGIBQ (13)
+#define IRQ_IOP13XX_ATU_IM (14)
+#define IRQ_IOP13XX_ATU_BIST (15)
+#define IRQ_IOP13XX_PPMU (16)
+#define IRQ_IOP13XX_COREPMU (17)
+#define IRQ_IOP13XX_CORECACHE (18)
+#define IRQ_IOP13XX_RSVD_19 (19)
+#define IRQ_IOP13XX_RSVD_20 (20)
+#define IRQ_IOP13XX_RSVD_21 (21)
+#define IRQ_IOP13XX_RSVD_22 (22)
+#define IRQ_IOP13XX_RSVD_23 (23)
+#define IRQ_IOP13XX_XINT0 (24)
+#define IRQ_IOP13XX_XINT1 (25)
+#define IRQ_IOP13XX_XINT2 (26)
+#define IRQ_IOP13XX_XINT3 (27)
+#define IRQ_IOP13XX_XINT4 (28)
+#define IRQ_IOP13XX_XINT5 (29)
+#define IRQ_IOP13XX_XINT6 (30)
+#define IRQ_IOP13XX_XINT7 (31)
+ /* IINTSRC1 bit */
+#define IRQ_IOP13XX_XINT8 (32) /* 0 */
+#define IRQ_IOP13XX_XINT9 (33) /* 1 */
+#define IRQ_IOP13XX_XINT10 (34) /* 2 */
+#define IRQ_IOP13XX_XINT11 (35) /* 3 */
+#define IRQ_IOP13XX_XINT12 (36) /* 4 */
+#define IRQ_IOP13XX_XINT13 (37) /* 5 */
+#define IRQ_IOP13XX_XINT14 (38) /* 6 */
+#define IRQ_IOP13XX_XINT15 (39) /* 7 */
+#define IRQ_IOP13XX_RSVD_40 (40) /* 8 */
+#define IRQ_IOP13XX_RSVD_41 (41) /* 9 */
+#define IRQ_IOP13XX_RSVD_42 (42) /* 10 */
+#define IRQ_IOP13XX_RSVD_43 (43) /* 11 */
+#define IRQ_IOP13XX_RSVD_44 (44) /* 12 */
+#define IRQ_IOP13XX_RSVD_45 (45) /* 13 */
+#define IRQ_IOP13XX_RSVD_46 (46) /* 14 */
+#define IRQ_IOP13XX_RSVD_47 (47) /* 15 */
+#define IRQ_IOP13XX_RSVD_48 (48) /* 16 */
+#define IRQ_IOP13XX_RSVD_49 (49) /* 17 */
+#define IRQ_IOP13XX_RSVD_50 (50) /* 18 */
+#define IRQ_IOP13XX_UART0 (51) /* 19 */
+#define IRQ_IOP13XX_UART1 (52) /* 20 */
+#define IRQ_IOP13XX_PBIE (53) /* 21 */
+#define IRQ_IOP13XX_ATU_CRW (54) /* 22 */
+#define IRQ_IOP13XX_ATU_ERR (55) /* 23 */
+#define IRQ_IOP13XX_MCU_ERR (56) /* 24 */
+#define IRQ_IOP13XX_ADMA0_ERR (57) /* 25 */
+#define IRQ_IOP13XX_ADMA1_ERR (58) /* 26 */
+#define IRQ_IOP13XX_ADMA2_ERR (59) /* 27 */
+#define IRQ_IOP13XX_RSVD_60 (60) /* 28 */
+#define IRQ_IOP13XX_RSVD_61 (61) /* 29 */
+#define IRQ_IOP13XX_MSG_ERR (62) /* 30 */
+#define IRQ_IOP13XX_RSVD_63 (63) /* 31 */
+ /* IINTSRC2 bit */
+#define IRQ_IOP13XX_INTERPROC (64) /* 0 */
+#define IRQ_IOP13XX_RSVD_65 (65) /* 1 */
+#define IRQ_IOP13XX_RSVD_66 (66) /* 2 */
+#define IRQ_IOP13XX_RSVD_67 (67) /* 3 */
+#define IRQ_IOP13XX_RSVD_68 (68) /* 4 */
+#define IRQ_IOP13XX_RSVD_69 (69) /* 5 */
+#define IRQ_IOP13XX_RSVD_70 (70) /* 6 */
+#define IRQ_IOP13XX_RSVD_71 (71) /* 7 */
+#define IRQ_IOP13XX_RSVD_72 (72) /* 8 */
+#define IRQ_IOP13XX_RSVD_73 (73) /* 9 */
+#define IRQ_IOP13XX_RSVD_74 (74) /* 10 */
+#define IRQ_IOP13XX_RSVD_75 (75) /* 11 */
+#define IRQ_IOP13XX_RSVD_76 (76) /* 12 */
+#define IRQ_IOP13XX_RSVD_77 (77) /* 13 */
+#define IRQ_IOP13XX_RSVD_78 (78) /* 14 */
+#define IRQ_IOP13XX_RSVD_79 (79) /* 15 */
+#define IRQ_IOP13XX_RSVD_80 (80) /* 16 */
+#define IRQ_IOP13XX_RSVD_81 (81) /* 17 */
+#define IRQ_IOP13XX_RSVD_82 (82) /* 18 */
+#define IRQ_IOP13XX_RSVD_83 (83) /* 19 */
+#define IRQ_IOP13XX_RSVD_84 (84) /* 20 */
+#define IRQ_IOP13XX_RSVD_85 (85) /* 21 */
+#define IRQ_IOP13XX_RSVD_86 (86) /* 22 */
+#define IRQ_IOP13XX_RSVD_87 (87) /* 23 */
+#define IRQ_IOP13XX_RSVD_88 (88) /* 24 */
+#define IRQ_IOP13XX_RSVD_89 (89) /* 25 */
+#define IRQ_IOP13XX_RSVD_90 (90) /* 26 */
+#define IRQ_IOP13XX_RSVD_91 (91) /* 27 */
+#define IRQ_IOP13XX_RSVD_92 (92) /* 28 */
+#define IRQ_IOP13XX_RSVD_93 (93) /* 29 */
+#define IRQ_IOP13XX_SIB_ERR (94) /* 30 */
+#define IRQ_IOP13XX_SRAM_ERR (95) /* 31 */
+ /* IINTSRC3 bit */
+#define IRQ_IOP13XX_I2C_2 (96) /* 0 */
+#define IRQ_IOP13XX_ATUE_BIST (97) /* 1 */
+#define IRQ_IOP13XX_ATUE_CRW (98) /* 2 */
+#define IRQ_IOP13XX_ATUE_ERR (99) /* 3 */
+#define IRQ_IOP13XX_IMU (100) /* 4 */
+#define IRQ_IOP13XX_RSVD_101 (101) /* 5 */
+#define IRQ_IOP13XX_RSVD_102 (102) /* 6 */
+#define IRQ_IOP13XX_TPMI0_OUT (103) /* 7 */
+#define IRQ_IOP13XX_TPMI1_OUT (104) /* 8 */
+#define IRQ_IOP13XX_TPMI2_OUT (105) /* 9 */
+#define IRQ_IOP13XX_TPMI3_OUT (106) /* 10 */
+#define IRQ_IOP13XX_ATUE_IMA (107) /* 11 */
+#define IRQ_IOP13XX_ATUE_IMB (108) /* 12 */
+#define IRQ_IOP13XX_ATUE_IMC (109) /* 13 */
+#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
+#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
+#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
+#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
+#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
+#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
+#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
+#define IRQ_IOP13XX_RSVD_117 (117) /* 21 */
+#define IRQ_IOP13XX_RSVD_118 (118) /* 22 */
+#define IRQ_IOP13XX_RSVD_119 (119) /* 23 */
+#define IRQ_IOP13XX_RSVD_120 (120) /* 24 */
+#define IRQ_IOP13XX_RSVD_121 (121) /* 25 */
+#define IRQ_IOP13XX_RSVD_122 (122) /* 26 */
+#define IRQ_IOP13XX_RSVD_123 (123) /* 27 */
+#define IRQ_IOP13XX_RSVD_124 (124) /* 28 */
+#define IRQ_IOP13XX_RSVD_125 (125) /* 29 */
+#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
+#define IRQ_IOP13XX_HPI (127) /* 31 */
+
+#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
+#define NR_IRQS NR_IOP13XX_IRQS
+
+#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
new file mode 100644
index 000000000000..031a0fa78eff
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/arch/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+#define TASK_SIZE UL(0x3f000000)
+#define PAGE_OFFSET UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x) (__virt_to_phys(x))
+#define __bus_to_virt(x) (__phys_to_virt(x))
+
+#define virt_to_lbus(x) \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x) \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+ (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page) \
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr) (0)
+
+#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
new file mode 100644
index 000000000000..4041f30d4cd3
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <asm/arch/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \
+ IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \
+ IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \
+ IOP13XX_ATUE_STAT_ERR_COR | \
+ IOP13XX_ATUE_STAT_ERR_UNCOR | \
+ IOP13XX_ATUE_STAT_CRS | \
+ IOP13XX_ATUE_STAT_DET_PAR_ERR | \
+ IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+ IOP13XX_ATUE_STAT_SIG_TABORT | \
+ IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+ IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \
+ IOP13XX_ATUX_STAT_REC_SCEM | \
+ IOP13XX_ATUX_STAT_TX_SERR | \
+ IOP13XX_ATUX_STAT_DET_PAR_ERR | \
+ IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+ IOP13XX_ATUX_STAT_REC_SERR | \
+ IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+ IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+ IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+ IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
new file mode 100644
index 000000000000..ee3a62530af2
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/system.h
@@ -0,0 +1,59 @@
+/*
+ * linux/include/asm-arm/arch-iop13xx/system.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/iop13xx.h>
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+/* WDTCR CP6 R7 Page 9 */
+static inline u32 read_wdtcr(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
+ return val;
+}
+static inline void write_wdtcr(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
+}
+
+/* WDTSR CP6 R8 Page 9 */
+static inline u32 read_wdtsr(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
+ return val;
+}
+static inline void write_wdtsr(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
+}
+
+#define IOP13XX_WDTCR_EN_ARM 0x1e1e1e1e
+#define IOP13XX_WDTCR_EN 0xe1e1e1e1
+#define IOP13XX_WDTCR_DIS_ARM 0x1f1f1f1f
+#define IOP13XX_WDTCR_DIS 0xf1f1f1f1
+#define IOP13XX_WDTSR_WRITE_EN (1 << 31)
+#define IOP13XX_WDTCR_IB_RESET (1 << 0)
+static inline void arch_reset(char mode)
+{
+ /*
+ * Reset the internal bus (warning both cores are reset)
+ */
+ u32 cp_flags = iop13xx_cp6_save();
+ write_wdtcr(IOP13XX_WDTCR_EN_ARM);
+ write_wdtcr(IOP13XX_WDTCR_EN);
+ write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+ write_wdtcr(0x1000);
+ iop13xx_cp6_restore(cp_flags);
+
+ for(;;);
+}
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
new file mode 100644
index 000000000000..f0c51dd97ed8
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/timex.h
@@ -0,0 +1,3 @@
+#include <asm/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
new file mode 100644
index 000000000000..b9525d59b7ad
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/uncompress.h
@@ -0,0 +1,24 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <asm/hardware.h>
+#include <asm/processor.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+ while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+ cpu_relax();
+ UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/include/asm-arm/arch-iop13xx/vmalloc.h
new file mode 100644
index 000000000000..c53456740345
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _VMALLOC_H_
+#define _VMALLOC_H_
+#define VMALLOC_END 0xfa000000UL
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
index 4281838873ef..6b437f7c9955 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -76,6 +76,7 @@
#define NSLU2_GPIO_BUZZ 4
#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
+
/* LEDs */
#define NSLU2_LED_RED NSLU2_GPIO0
@@ -84,8 +85,8 @@
#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-#define NSLU2_LED_DISK1 NSLU2_GPIO2
-#define NSLU2_LED_DISK2 NSLU2_GPIO3
+#define NSLU2_LED_DISK1 NSLU2_GPIO3
+#define NSLU2_LED_DISK2 NSLU2_GPIO2
#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
new file mode 100644
index 000000000000..dbdec36ff0d1
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/udc.h
@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
index d744d97c18a5..645dbdfb3908 100644
--- a/include/asm-arm/arch-l7200/io.h
+++ b/include/asm-arm/arch-l7200/io.h
@@ -17,59 +17,11 @@
/*
* There are not real ISA nor PCI buses, so we fake it.
*/
-#define __io_pci(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a) (a)
-
-#define __ioaddr(p) __io_pci(p)
-
-/*
- * Generic virtual read/write
- */
-#define __arch_getb(a) (*(volatile unsigned char *)(a))
-#define __arch_getl(a) (*(volatile unsigned int *)(a))
-
-static inline unsigned int __arch_getw(unsigned long a)
-{
- unsigned int value;
- __asm__ __volatile__("ldrh %0, [%1, #0] @ getw"
- : "=&r" (value)
- : "r" (a) : "cc");
- return value;
-}
-
-#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
-
-static inline void __arch_putw(unsigned int value, unsigned long a)
+static inline void __iomem *__io(unsigned long addr)
{
- __asm__ __volatile__("strh %0, [%1, #0] @ putw"
- : : "r" (value), "r" (a) : "cc");
+ return (void __iomem *)addr;
}
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p) (*(volatile unsigned char *)(p) = (v))
-#define inb_t(p) (*(volatile unsigned char *)(p))
-#define outw_t(v,p) (*(volatile unsigned int *)(p) = (v))
-#define inw_t(p) (*(volatile unsigned int *)(p))
-#define outl_t(v,p) (*(volatile unsigned long *)(p) = (v))
-#define inl_t(p) (*(volatile unsigned long *)(p))
-
-/*
- * FIXME - These are to allow for linking. On all the other
- * ARM platforms, the entire IO space is contiguous.
- * The 7200 has three separate IO spaces. The below
- * macros will eventually become more involved. Use
- * with caution and don't be surprised by kernel oopses!!!
- */
-#define inb(p) inb_t(p)
-#define inw(p) inw_t(p)
-#define inl(p) inl_t(p)
-#define outb(v,p) outb_t(v,p)
-#define outw(v,p) outw_t(v,p)
-#define outl(v,p) outl_t(v,p)
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
index 9f1a58cbf407..9b0c8012e713 100644
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ b/include/asm-arm/arch-lh7a40x/memory.h
@@ -58,18 +58,6 @@
#endif
/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and return the mem_map of that node.
- */
-# define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and return the mem_map of that node.
- */
-# define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-/*
* Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
* and returns the index corresponding to the appropriate page in the
* node's mem_map.
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
index eaf6d43939e9..e17f9881faf0 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -27,7 +27,6 @@
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
-#ifdef CONFIG_DISCONTIGMEM
/*
* The nodes are matched with the physical SDRAM banks as follows:
*
@@ -35,38 +34,9 @@
* node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff
* node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff
* node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
*/
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 26)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x03ffffff) >> PAGE_SHIFT)
-
-#endif
+#define NODE_MEM_SIZE_BITS 26
#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index cff752f35230..083e03c5639f 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -99,7 +99,7 @@
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_ENRINTR (1 << 9) /* The end of Receive */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
@@ -803,12 +803,11 @@
#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCISR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCISR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCISR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCISR1_IERS (1 << 27) /* IntEn - Reset */
-
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h
new file mode 100644
index 000000000000..6135592e60f2
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/h1940.h
@@ -0,0 +1,21 @@
+/* linux/include/asm-arm/arch-s3c2410/h1940.h
+ *
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_H
+#define __ASM_ARCH_H1940_H
+
+#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT (0x30081000)
+#define H1940_SUSPEND_CHECK (0x30080000)
+
+extern void h1940_pm_return(void);
+
+#endif /* __ASM_ARCH_H1940_H */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 718246d85952..4f72a853a5cf 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -71,7 +71,7 @@ arch_reset(char mode)
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
- S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+ S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(5000);
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h
deleted file mode 100644
index 3f37ca07806d..000000000000
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/jornada720.h
- *
- * Created 2000/11/29 by John Ankcorn <jca@lcs.mit.edu>
- *
- * This file contains the hardware specific definitions for HP Jornada 720
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/hardware.h> instead"
-#endif
-
-#define SA1111_BASE (0x40000000)
-
-#define GPIO_JORNADA720_KEYBOARD GPIO_GPIO(0)
-#define GPIO_JORNADA720_MOUSE GPIO_GPIO(9)
-
-#define GPIO_JORNADA720_KEYBOARD_IRQ IRQ_GPIO0
-#define GPIO_JORNADA720_MOUSE_IRQ IRQ_GPIO9
-
-/* MCU COMMANDS */
-#define MCU_GetBatteryData 0xc0
-#define MCU_GetScanKeyCode 0x90
-#define MCU_GetTouchSamples 0xa0
-#define MCU_GetContrast 0xD0
-#define MCU_SetContrast 0xD1
-#define MCU_GetBrightness 0xD2
-#define MCU_SetBrightness 0xD3
-#define MCU_ContrastOff 0xD8
-#define MCU_BrightnessOff 0xD9
-#define MCU_PWMOFF 0xDF
-#define MCU_TxDummy 0x11
-#define MCU_ErrorCode 0x00
-
-#ifndef __ASSEMBLY__
-
-void jornada720_mcu_init(void);
-void jornada_contrast(int arg_contrast);
-void jornada720_battery(void);
-int jornada720_getkey(unsigned char *data, int size);
-#endif
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
index 1ff172dc8e33..0e907fc6d42a 100644
--- a/include/asm-arm/arch-sa1100/memory.h
+++ b/include/asm-arm/arch-sa1100/memory.h
@@ -39,7 +39,6 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
-#ifdef CONFIG_DISCONTIGMEM
/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's NUMA support to implement our
@@ -57,38 +56,7 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
* node 2: 0xd0000000 - 0xd7ffffff
* node 3: 0xd8000000 - 0xdfffffff
*/
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 27)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) (((pfn) - PHYS_PFN_OFFSET) >> (27 - PAGE_SHIFT))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and return the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and return the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x07ffffff) >> PAGE_SHIFT)
-
-#endif
+#define NODE_MEM_SIZE_BITS 27
/*
* Cache flushing area - SA1100 zero bank
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
index 0e36fd5d87df..7b62351f097d 100644
--- a/include/asm-arm/bug.h
+++ b/include/asm-arm/bug.h
@@ -4,10 +4,10 @@
#ifdef CONFIG_BUG
#ifdef CONFIG_DEBUG_BUGVERBOSE
-extern void __bug(const char *file, int line, void *data) __attribute__((noreturn));
+extern void __bug(const char *file, int line) __attribute__((noreturn));
/* give file/line information */
-#define BUG() __bug(__FILE__, __LINE__, NULL)
+#define BUG() __bug(__FILE__, __LINE__)
#else
diff --git a/include/asm-arm/cnt32_to_63.h b/include/asm-arm/cnt32_to_63.h
new file mode 100644
index 000000000000..480c873fa746
--- /dev/null
+++ b/include/asm-arm/cnt32_to_63.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
+ *
+ * Author: Nicolas Pitre
+ * Created: December 3, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_CNT32_TO_63_H__
+#define __INCLUDE_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * Prototype: u64 cnt32_to_63(u32 cnt)
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent. This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory. The top bit in
+ * memory is used to synchronize with the hardware clock half-period. When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment. And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The only restriction for the algorithm to work properly is that this
+ * code must be executed at least once per each half period of the 32-bit
+ * counter to properly update the state bit in memory. This is usually not a
+ * problem in practice, but if it is then a kernel timer could be scheduled
+ * to manage for this code to be executed often enough.
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage. It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+
+/* this is used only to give gcc a clue about good code generation */
+typedef union {
+ struct {
+#if defined(__LITTLE_ENDIAN)
+ u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+ u32 hi, lo;
+#endif
+ };
+ u64 val;
+} cnt32_to_63_t;
+
+#define cnt32_to_63(cnt_lo) \
+({ \
+ static volatile u32 __m_cnt_hi = 0; \
+ cnt32_to_63_t __x; \
+ __x.hi = __m_cnt_hi; \
+ __x.lo = (cnt_lo); \
+ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+ __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+ __x.val; \
+})
+
+#endif
diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h
index 3682616804ca..37e0a96e8789 100644
--- a/include/asm-arm/div64.h
+++ b/include/asm-arm/div64.h
@@ -27,7 +27,7 @@
#define __xh "r1"
#endif
-#define do_div(n,base) \
+#define __do_div_asm(n, base) \
({ \
register unsigned int __base asm("r4") = base; \
register unsigned long long __n asm("r0") = n; \
@@ -45,4 +45,182 @@
__rem; \
})
+#if __GNUC__ < 4
+
+/*
+ * gcc versions earlier than 4.0 are simply too problematic for the
+ * optimized implementation below. First there is gcc PR 15089 that
+ * tend to trig on more complex constructs, spurious .global __udivsi3
+ * are inserted even if none of those symbols are referenced in the
+ * generated code, and those gcc versions are not able to do constant
+ * propagation on long long values anyway.
+ */
+#define do_div(n, base) __do_div_asm(n, base)
+
+#elif __GNUC__ >= 4
+
+#include <asm/bug.h>
+
+/*
+ * If the divisor happens to be constant, we determine the appropriate
+ * inverse at compile time to turn the division into a few inline
+ * multiplications instead which is much faster. And yet only if compiling
+ * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
+ * sufficiently recent to perform proper long long constant propagation.
+ * (It is unfortunate that gcc doesn't perform all this internally.)
+ */
+#define do_div(n, base) \
+({ \
+ unsigned int __r, __b = (base); \
+ if (!__builtin_constant_p(__b) || __b == 0 || \
+ (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \
+ /* non-constant divisor (or zero): slow path */ \
+ __r = __do_div_asm(n, __b); \
+ } else if ((__b & (__b - 1)) == 0) { \
+ /* Trivial: __b is constant and a power of 2 */ \
+ /* gcc does the right thing with this code. */ \
+ __r = n; \
+ __r &= (__b - 1); \
+ n /= __b; \
+ } else { \
+ /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \
+ /* We rely on the fact that most of this code gets */ \
+ /* optimized away at compile time due to constant */ \
+ /* propagation and only a couple inline assembly */ \
+ /* instructions should remain. Better avoid any */ \
+ /* code construct that might prevent that. */ \
+ unsigned long long __res, __x, __t, __m, __n = n; \
+ unsigned int __c, __p, __z = 0; \
+ /* preserve low part of n for reminder computation */ \
+ __r = __n; \
+ /* determine number of bits to represent __b */ \
+ __p = 1 << __div64_fls(__b); \
+ /* compute __m = ((__p << 64) + __b - 1) / __b */ \
+ __m = (~0ULL / __b) * __p; \
+ __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \
+ /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \
+ __x = ~0ULL / __b * __b - 1; \
+ __res = (__m & 0xffffffff) * (__x & 0xffffffff); \
+ __res >>= 32; \
+ __res += (__m & 0xffffffff) * (__x >> 32); \
+ __t = __res; \
+ __res += (__x & 0xffffffff) * (__m >> 32); \
+ __t = (__res < __t) ? (1ULL << 32) : 0; \
+ __res = (__res >> 32) + __t; \
+ __res += (__m >> 32) * (__x >> 32); \
+ __res /= __p; \
+ /* Now sanitize and optimize what we've got. */ \
+ if (~0ULL % (__b / (__b & -__b)) == 0) { \
+ /* those cases can be simplified with: */ \
+ __n /= (__b & -__b); \
+ __m = ~0ULL / (__b / (__b & -__b)); \
+ __p = 1; \
+ __c = 1; \
+ } else if (__res != __x / __b) { \
+ /* We can't get away without a correction */ \
+ /* to compensate for bit truncation errors. */ \
+ /* To avoid it we'd need an additional bit */ \
+ /* to represent __m which would overflow it. */ \
+ /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \
+ __c = 1; \
+ /* Compute __m = (__p << 64) / __b */ \
+ __m = (~0ULL / __b) * __p; \
+ __m += ((~0ULL % __b + 1) * __p) / __b; \
+ } else { \
+ /* Reduce __m/__p, and try to clear bit 31 */ \
+ /* of __m when possible otherwise that'll */ \
+ /* need extra overflow handling later. */ \
+ unsigned int __bits = -(__m & -__m); \
+ __bits |= __m >> 32; \
+ __bits = (~__bits) << 1; \
+ /* If __bits == 0 then setting bit 31 is */ \
+ /* unavoidable. Simply apply the maximum */ \
+ /* possible reduction in that case. */ \
+ /* Otherwise the MSB of __bits indicates the */ \
+ /* best reduction we should apply. */ \
+ if (!__bits) { \
+ __p /= (__m & -__m); \
+ __m /= (__m & -__m); \
+ } else { \
+ __p >>= __div64_fls(__bits); \
+ __m >>= __div64_fls(__bits); \
+ } \
+ /* No correction needed. */ \
+ __c = 0; \
+ } \
+ /* Now we have a combination of 2 conditions: */ \
+ /* 1) whether or not we need a correction (__c), and */ \
+ /* 2) whether or not there might be an overflow in */ \
+ /* the cross product (__m & ((1<<63) | (1<<31))) */ \
+ /* Select the best insn combination to perform the */ \
+ /* actual __m * __n / (__p << 64) operation. */ \
+ if (!__c) { \
+ asm ( "umull %Q0, %R0, %1, %Q2\n\t" \
+ "mov %Q0, #0" \
+ : "=&r" (__res) \
+ : "r" (__m), "r" (__n) \
+ : "cc" ); \
+ } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \
+ __res = __m; \
+ asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \
+ "mov %Q0, #0" \
+ : "+r" (__res) \
+ : "r" (__m), "r" (__n) \
+ : "cc" ); \
+ } else { \
+ asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \
+ "cmn %Q0, %Q1\n\t" \
+ "adcs %R0, %R0, %R1\n\t" \
+ "adc %Q0, %3, #0" \
+ : "=&r" (__res) \
+ : "r" (__m), "r" (__n), "r" (__z) \
+ : "cc" ); \
+ } \
+ if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \
+ asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \
+ "umlal %R0, %Q0, %Q1, %R2\n\t" \
+ "mov %R0, #0\n\t" \
+ "umlal %Q0, %R0, %R1, %R2" \
+ : "+r" (__res) \
+ : "r" (__m), "r" (__n) \
+ : "cc" ); \
+ } else { \
+ asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \
+ "umlal %R0, %1, %Q2, %R3\n\t" \
+ "mov %R0, #0\n\t" \
+ "adds %Q0, %1, %Q0\n\t" \
+ "adc %R0, %R0, #0\n\t" \
+ "umlal %Q0, %R0, %R2, %R3" \
+ : "+r" (__res), "+r" (__z) \
+ : "r" (__m), "r" (__n) \
+ : "cc" ); \
+ } \
+ __res /= __p; \
+ /* The reminder can be computed with 32-bit regs */ \
+ /* only, and gcc is good at that. */ \
+ { \
+ unsigned int __res0 = __res; \
+ unsigned int __b0 = __b; \
+ __r -= __res0 * __b0; \
+ } \
+ /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \
+ n = __res; \
+ } \
+ __r; \
+})
+
+/* our own fls implementation to make sure constant propagation is fine */
+#define __div64_fls(bits) \
+({ \
+ unsigned int __left = (bits), __nr = 0; \
+ if (__left & 0xffff0000) __nr += 16, __left >>= 16; \
+ if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \
+ if (__left & 0x000000f0) __nr += 4, __left >>= 4; \
+ if (__left & 0x0000000c) __nr += 2, __left >>= 2; \
+ if (__left & 0x00000002) __nr += 1; \
+ __nr; \
+})
+
+#endif
+
#endif
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
index 17f0c656d272..642382d2c9f0 100644
--- a/include/asm-arm/elf.h
+++ b/include/asm-arm/elf.h
@@ -1,17 +1,22 @@
#ifndef __ASMARM_ELF_H
#define __ASMARM_ELF_H
-
+#ifndef __ASSEMBLY__
/*
* ELF register definitions..
*/
-
#include <asm/ptrace.h>
#include <asm/user.h>
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fp elf_fpregset_t;
+#endif
+
#define EM_ARM 40
#define EF_ARM_APCS26 0x08
#define EF_ARM_SOFT_FLOAT 0x200
@@ -23,11 +28,6 @@ typedef unsigned long elf_freg_t[3];
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
-
/*
* These are used to set parameters in the core dumps.
*/
@@ -39,97 +39,99 @@ typedef struct user_fp elf_fpregset_t;
#endif
#define ELF_ARCH EM_ARM
-#ifdef __KERNEL__
-#include <asm/procinfo.h>
-
/*
- * This is used to ensure we don't load something for the wrong architecture.
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
*/
-#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) )
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be
- registered with atexit, as per the SVR4 ABI. A value of 0 means we
- have no such handler. */
-#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
+#define HWCAP_SWP 1
+#define HWCAP_HALF 2
+#define HWCAP_THUMB 4
+#define HWCAP_26BIT 8 /* Play it safe */
+#define HWCAP_FAST_MULT 16
+#define HWCAP_FPA 32
+#define HWCAP_VFP 64
+#define HWCAP_EDSP 128
+#define HWCAP_JAVA 256
+#define HWCAP_IWMMXT 512
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
#define ELF_HWCAP (elf_hwcap)
+extern unsigned int elf_hwcap;
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-/* For now we just provide a fairly general string that describes the
- processor family. This could be made more specific later if someone
- implemented optimisations that require it. 26-bit CPUs give you
- "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
- supported). 32-bit CPUs give you "v3[lb]" for anything based on an
- ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
- core. */
-
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For now we just provide a fairly general string that describes the
+ * processor family. This could be made more specific later if someone
+ * implemented optimisations that require it. 26-bit CPUs give you
+ * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+ * supported). 32-bit CPUs give you "v3[lb]" for anything based on an
+ * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
+ * core.
+ */
#define ELF_PLATFORM_SIZE 8
-extern char elf_platform[];
#define ELF_PLATFORM (elf_platform)
+extern char elf_platform[];
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
+
/*
* 32-bit code is always OK. Some cpus can do 26-bit, some can't.
*/
#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
#define ELF_THUMB_OK(x) \
- (( (elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 1) == 1) || \
+ ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
((x)->e_entry & 3) == 0)
#define ELF_26BIT_OK(x) \
- (( (elf_hwcap & HWCAP_26BIT) && (x)->e_flags & EF_ARM_APCS26) || \
+ ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
((x)->e_flags & EF_ARM_APCS26) == 0)
-#ifndef CONFIG_IWMMXT
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
-/* Old NetWinder binaries were compiled in such a way that the iBCS
- heuristic always trips on them. Until these binaries become uncommon
- enough not to care, don't trust the `ibcs' flag here. In any case
- there is no other ELF system currently supported by iBCS.
- @@ Could print a warning message to encourage users to upgrade. */
-#define SET_PERSONALITY(ex,ibcs2) \
- set_personality(((ex).e_flags&EF_ARM_APCS26 ?PER_LINUX :PER_LINUX_32BIT))
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
-#else
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be
+ registered with atexit, as per the SVR4 ABI. A value of 0 means we
+ have no such handler. */
+#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
/*
- * All iWMMXt capable CPUs don't support 26-bit mode. Yet they can run
- * legacy binaries which used to contain FPA11 floating point instructions
- * that have always been emulated by the kernel. PFA11 and iWMMXt overlap
- * on coprocessor 1 space though. We therefore must decide if given task
- * is allowed to use CP 0 and 1 for iWMMXt, or if they should be blocked
- * at all times for the prefetch exception handler to catch FPA11 opcodes
- * and emulate them. The best indication to discriminate those two cases
- * is the SOFT_FLOAT flag in the ELF header.
+ * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
+ * and CP1, we only enable access to the iWMMXt coprocessor if the
+ * binary is EABI or softfloat (and thus, guaranteed not to use
+ * FPA instructions.)
*/
-
-#define SET_PERSONALITY(ex,ibcs2) \
-do { \
- set_personality(PER_LINUX_32BIT); \
- if (((ex).e_flags & EF_ARM_EABI_MASK) || \
- ((ex).e_flags & EF_ARM_SOFT_FLOAT)) \
- set_thread_flag(TIF_USING_IWMMXT); \
- else \
- clear_thread_flag(TIF_USING_IWMMXT); \
-} while (0)
-
-#endif
+#define SET_PERSONALITY(ex, ibcs2) \
+ do { \
+ if ((ex).e_flags & EF_ARM_APCS26) { \
+ set_personality(PER_LINUX); \
+ } else { \
+ set_personality(PER_LINUX_32BIT); \
+ if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
+ set_thread_flag(TIF_USING_IWMMXT); \
+ else \
+ clear_thread_flag(TIF_USING_IWMMXT); \
+ } \
+ } while (0)
#endif
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index ae999fd5dc67..288f76b166d0 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -75,14 +75,6 @@ extern void __readwrite_bug(const char *fn);
*/
#include <asm/arch/io.h>
-#ifdef __io_pci
-#warning machine class uses buggy __io_pci
-#endif
-#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \
- defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl)
-#warning machine class uses old __arch_putw or __arch_getw
-#endif
-
/*
* IO port access primitives
* -------------------------
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
index 0e017ecf2096..eb0bfba6570d 100644
--- a/include/asm-arm/mach/irq.h
+++ b/include/asm-arm/mach/irq.h
@@ -22,12 +22,6 @@ extern void init_FIQ(void);
extern int show_fiq_list(struct seq_file *, void *);
/*
- * Function wrappers
- */
-#define set_irq_chipdata(irq, d) set_irq_chip_data(irq, d)
-#define get_irq_chipdata(irq) get_irq_chip_data(irq)
-
-/*
* Obsolete inline function for calling irq descriptor handlers.
*/
static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
@@ -44,12 +38,6 @@ void set_irq_flags(unsigned int irq, unsigned int flags);
/*
* This is for easy migration, but should be changed in the source
*/
-#define do_level_IRQ handle_level_irq
-#define do_edge_IRQ handle_edge_irq
-#define do_simple_IRQ handle_simple_irq
-#define irqdesc irq_desc
-#define irqchip irq_chip
-
#define do_bad_IRQ(irq,desc) \
do { \
spin_lock(&desc->lock); \
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index 91d536c215d7..d9bfb39adabf 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -215,6 +215,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
* virt_addr_valid(k) indicates whether a virtual address is valid
*/
#ifndef CONFIG_DISCONTIGMEM
+
#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
@@ -230,6 +231,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
* around in memory.
*/
#include <linux/numa.h>
+
#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)
#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
@@ -256,6 +258,43 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
*/
#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT)
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+#ifdef NODE_MEM_SIZE_BITS
+#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1)
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+ (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+ (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+ (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
+
+#endif /* NODE_MEM_SIZE_BITS */
+
#endif /* !CONFIG_DISCONTIGMEM */
/*
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index c1b264dff287..7b1c9acdf79a 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -44,7 +44,6 @@
#define PAGE_READONLY __pgprot(0)
#define PAGE_KERNEL __pgprot(0)
-//extern void paging_init(struct meminfo *, struct machine_desc *);
#define swapper_pg_dir ((pgd_t *) 0)
#define __swp_type(x) (0)
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index ed8cb5963e99..88cd5c784ef0 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -169,8 +169,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define L_PTE_WRITE (1 << 5)
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
-#define L_PTE_COHERENT (1 << 9) /* I/O coherent (xsc3) */
-#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */
+#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */
#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h
index 04f4d34c6317..b442e8e2a809 100644
--- a/include/asm-arm/processor.h
+++ b/include/asm-arm/processor.h
@@ -20,7 +20,6 @@
#ifdef __KERNEL__
#include <asm/ptrace.h>
-#include <asm/procinfo.h>
#include <asm/types.h>
union debug_insn {
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index 91a31adfa8a8..4d3c685075e0 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -10,7 +10,7 @@
#ifndef __ASM_PROCINFO_H
#define __ASM_PROCINFO_H
-#ifndef __ASSEMBLY__
+#ifdef __KERNEL__
struct cpu_tlb_fns;
struct cpu_user_fns;
@@ -42,19 +42,8 @@ struct proc_info_list {
struct cpu_cache_fns *cache;
};
-extern unsigned int elf_hwcap;
-
-#endif /* __ASSEMBLY__ */
-
-#define HWCAP_SWP 1
-#define HWCAP_HALF 2
-#define HWCAP_THUMB 4
-#define HWCAP_26BIT 8 /* Play it safe */
-#define HWCAP_FAST_MULT 16
-#define HWCAP_FPA 32
-#define HWCAP_VFP 64
-#define HWCAP_EDSP 128
-#define HWCAP_JAVA 256
-#define HWCAP_IWMMXT 512
-
+#else /* __KERNEL__ */
+#include <asm/elf.h>
+#warning "Please include asm/elf.h instead"
+#endif /* __KERNEL__ */
#endif
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
index f28b236139ed..d9b8bddc8732 100644
--- a/include/asm-arm/thread_info.h
+++ b/include/asm-arm/thread_info.h
@@ -94,8 +94,18 @@ static inline struct thread_info *current_thread_info(void)
return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
}
-extern struct thread_info *alloc_thread_info(struct task_struct *task);
-extern void free_thread_info(struct thread_info *);
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) \
+ ((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \
+ THREAD_SIZE_ORDER))
+#else
+#define alloc_thread_info(tsk) \
+ ((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
+#endif
+
+#define free_thread_info(info) \
+ free_pages((unsigned long)info, THREAD_SIZE_ORDER);
#define thread_saved_pc(tsk) \
((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h
index ce1150d4438d..79d6e02fa45e 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+++ b/include/asm-avr32/arch-at32ap/at91_pdc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+ * include/asm-arm/arch-at91rm9200/at91_pdc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -13,8 +13,8 @@
* (at your option) any later version.
*/
-#ifndef AT91RM9200_PDC_H
-#define AT91RM9200_PDC_H
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
diff --git a/include/linux/i2c-pxa.h b/include/linux/i2c-pxa.h
index 5f3eaf802223..41dcdfe7f625 100644
--- a/include/linux/i2c-pxa.h
+++ b/include/linux/i2c-pxa.h
@@ -1,29 +1,6 @@
#ifndef _LINUX_I2C_ALGO_PXA_H
#define _LINUX_I2C_ALGO_PXA_H
-struct i2c_eeprom_emu_watcher {
- void (*write)(void *, unsigned int addr, unsigned char newval);
-};
-
-struct i2c_eeprom_emu_watch {
- struct list_head node;
- unsigned int start;
- unsigned int end;
- struct i2c_eeprom_emu_watcher *ops;
- void *data;
-};
-
-#define I2C_EEPROM_EMU_SIZE (256)
-
-struct i2c_eeprom_emu {
- unsigned int size;
- unsigned int ptr;
- unsigned int seen_start;
- struct list_head watch;
-
- unsigned char bytes[I2C_EEPROM_EMU_SIZE];
-};
-
typedef enum i2c_slave_event_e {
I2C_SLAVE_EVENT_START_READ,
I2C_SLAVE_EVENT_START_WRITE,
@@ -37,12 +14,4 @@ struct i2c_slave_client {
void (*write)(void *ptr, unsigned int val);
};
-extern int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *, void *data,
- unsigned int addr, unsigned int size,
- struct i2c_eeprom_emu_watcher *);
-
-extern void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *, void *data, struct i2c_eeprom_emu_watcher *watcher);
-
-extern struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void);
-
#endif /* _LINUX_I2C_ALGO_PXA_H */