summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24190.txt51
-rw-r--r--Documentation/devicetree/bindings/power/supply/ltc2941.txt15
-rw-r--r--drivers/power/reset/at91-sama5d2_shdwc.c4
-rw-r--r--drivers/power/supply/Kconfig23
-rw-r--r--drivers/power/supply/Makefile2
-rw-r--r--drivers/power/supply/act8945a_charger.c4
-rw-r--r--drivers/power/supply/bq24190_charger.c346
-rw-r--r--drivers/power/supply/bq27xxx_battery.c575
-rw-r--r--drivers/power/supply/bq27xxx_battery_hdq.c135
-rw-r--r--drivers/power/supply/bq27xxx_battery_i2c.c16
-rw-r--r--drivers/power/supply/charger-manager.c9
-rw-r--r--drivers/power/supply/ds2780_battery.c4
-rw-r--r--drivers/power/supply/ds2781_battery.c4
-rw-r--r--drivers/power/supply/lp8788-charger.c18
-rw-r--r--drivers/power/supply/ltc2941-battery-gauge.c156
-rw-r--r--drivers/power/supply/max17042_battery.c42
-rw-r--r--drivers/power/supply/max1721x_battery.c448
-rw-r--r--drivers/power/supply/olpc_battery.c4
-rw-r--r--drivers/power/supply/pcf50633-charger.c2
-rw-r--r--drivers/power/supply/power_supply_core.c54
-rw-r--r--drivers/power/supply/sbs-battery.c26
-rw-r--r--drivers/w1/slaves/Kconfig6
-rw-r--r--drivers/w1/slaves/Makefile1
-rw-r--r--drivers/w1/slaves/w1_bq27000.c117
-rw-r--r--include/linux/power/bq24190_charger.h18
-rw-r--r--include/linux/power/bq27xxx_battery.h27
-rw-r--r--include/linux/power_supply.h2
27 files changed, 1471 insertions, 638 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
new file mode 100644
index 000000000000..9e517d307070
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
@@ -0,0 +1,51 @@
+TI BQ24190 Li-Ion Battery Charger
+
+Required properties:
+- compatible: contains one of the following:
+ * "ti,bq24190"
+ * "ti,bq24192i"
+- reg: integer, I2C address of the charger.
+- interrupts[-extended]: configuration for charger INT pin.
+
+Optional properties:
+- monitored-battery: phandle of battery characteristics devicetree node
+ The charger uses the following battery properties:
+ + precharge-current-microamp: maximum charge current during precharge
+ phase (typically 20% of battery capacity).
+ + charge-term-current-microamp: a charge cycle terminates when the
+ battery voltage is above recharge threshold, and the current is below
+ this setting (typically 10% of battery capacity).
+ See also Documentation/devicetree/bindings/power/supply/battery.txt
+- ti,system-minimum-microvolt: when power is connected and the battery is below
+ minimum system voltage, the system will be regulated above this setting.
+
+Notes:
+- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
+ charge current on USB SDP ports, among other features). To simulate this on
+ boards that wire the pin to a GPIO, set a gpio-hog.
+
+Example:
+
+ bat: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <128000>;
+ // etc.
+ };
+
+ bq24190: charger@6a {
+ compatible = "ti,bq24190";
+ reg = <0x6a>;
+ interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
+ monitored-battery = <&bat>;
+ ti,system-minimum-microvolt = <3200000>;
+ };
+
+ &twl_gpio {
+ otg {
+ gpio-hog;
+ gpios = <6 0>;
+ output-high;
+ line-name = "otg-gpio";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
index a9d7aa60558b..3b9ba147b041 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
+++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
@@ -1,13 +1,14 @@
-binding for LTC2941 and LTC2943 battery gauges
+binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges
-Both the LTC2941 and LTC2943 measure battery capacity.
-The LTC2943 is compatible with the LTC2941, it adds voltage and
-temperature monitoring, and uses a slightly different conversion
-formula for the charge counter.
+All chips measure battery capacity.
+The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+is software compatible, uses a slightly different conversion formula
+for the charge counter and adds voltage, current and temperature monitoring.
Required properties:
-- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
- indicates the type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943"
+ or "lltc,ltc2944" which also indicates the type of I2C chip attached.
- reg: The 7-bit I2C address.
- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
negative value when the battery has been connected to the wrong end of the
diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 55fce8b75245..31080c254124 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -171,8 +171,8 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
for_each_child_of_node(np, cnp) {
if (of_property_read_u32(cnp, "reg", &wk_input)) {
- dev_warn(&pdev->dev, "reg property is missing for %s\n",
- cnp->full_name);
+ dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
+ cnp);
continue;
}
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 969f5005669c..5ab90c1f3f7c 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -198,6 +198,15 @@ config BATTERY_BQ27XXX_I2C
Say Y here to enable support for batteries with BQ27xxx chips
connected over an I2C bus.
+config BATTERY_BQ27XXX_HDQ
+ tristate "BQ27xxx HDQ support"
+ depends on BATTERY_BQ27XXX
+ depends on W1
+ default y
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips
+ connected over an HDQ bus.
+
config BATTERY_BQ27XXX_DT_UPDATES_NVM
bool "BQ27xxx support for update of NVM/flash data memory"
depends on BATTERY_BQ27XXX_I2C
@@ -313,6 +322,19 @@ config BATTERY_MAX17042
with MAX17042. This driver also supports max17047/50 chips which are
improved version of max17042.
+config BATTERY_MAX1721X
+ tristate "MAX17211/MAX17215 standalone gas-gauge"
+ depends on W1
+ select REGMAP_W1
+ help
+ MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. MAX17211 used with single cell
+ battery. MAX17215 designed for muticell battery. Both them have
+ OneWire (W1) host interface.
+
+ Say Y here to enable support for the MAX17211/MAX17215 standalone
+ battery gas-gauge.
+
config BATTERY_Z2
tristate "Z2 battery driver"
depends on I2C && MACH_ZIPIT2
@@ -365,6 +387,7 @@ config BATTERY_RX51
config CHARGER_CPCAP
tristate "CPCAP PMIC Charger Driver"
depends on MFD_CPCAP && IIO
+ depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
default MFD_CPCAP
help
Say Y to enable support for CPCAP PMIC charger driver for Motorola
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index a41f40957847..621a19058fec 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -38,12 +38,14 @@ obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o
obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
index d1eb2e359532..8e117b31ba79 100644
--- a/drivers/power/supply/act8945a_charger.c
+++ b/drivers/power/supply/act8945a_charger.c
@@ -596,9 +596,9 @@ static int act8945a_charger_probe(struct platform_device *pdev)
return ret;
irq = of_irq_get(pdev->dev.of_node, 0);
- if (irq == -EPROBE_DEFER) {
+ if (irq <= 0) {
dev_err(&pdev->dev, "failed to find IRQ number\n");
- return -EPROBE_DEFER;
+ return irq ?: -ENXIO;
}
ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index d5a707e14526..35ff406aca48 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -16,6 +16,9 @@
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
@@ -43,6 +46,8 @@
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
+#define BQ24190_REG_POC_SYS_MIN_MIN 3000
+#define BQ24190_REG_POC_SYS_MIN_MAX 3700
#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0
@@ -57,9 +62,13 @@
#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
BIT(4))
#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4
+#define BQ24190_REG_PCTCC_IPRECHG_MIN 128
+#define BQ24190_REG_PCTCC_IPRECHG_MAX 2048
#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \
BIT(0))
#define BQ24190_REG_PCTCC_ITERM_SHIFT 0
+#define BQ24190_REG_PCTCC_ITERM_MIN 128
+#define BQ24190_REG_PCTCC_ITERM_MAX 2048
#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */
#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \
@@ -156,9 +165,13 @@ struct bq24190_dev_info {
struct extcon_dev *extcon;
struct notifier_block extcon_nb;
struct delayed_work extcon_work;
+ struct delayed_work input_current_limit_work;
char model_name[I2C_NAME_SIZE];
bool initialized;
bool irq_event;
+ u16 sys_min;
+ u16 iprechg;
+ u16 iterm;
struct mutex f_reg_lock;
u8 f_reg;
u8 ss_reg;
@@ -504,15 +517,112 @@ static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
#endif
-/*
- * According to the "Host Mode and default Mode" section of the
- * manual, a write to any register causes the bq24190 to switch
- * from default mode to host mode. It will switch back to default
- * mode after a WDT timeout unless the WDT is turned off as well.
- * So, by simply turning off the WDT, we accomplish both with the
- * same write.
- */
-static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
+#ifdef CONFIG_REGULATOR
+static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ pm_runtime_put_noidle(bdi->dev);
+ return ret;
+ }
+
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+ u8 val;
+
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ pm_runtime_put_noidle(bdi->dev);
+ return ret;
+ }
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+ .enable = bq24190_vbus_enable,
+ .disable = bq24190_vbus_disable,
+ .is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+ .name = "usb_otg_vbus",
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &bq24190_vbus_ops,
+ .fixed_uV = 5000000,
+ .n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+ struct regulator_config cfg = { };
+ struct regulator_dev *reg;
+ int ret = 0;
+
+ cfg.dev = bdi->dev;
+ if (pdata && pdata->regulator_init_data)
+ cfg.init_data = pdata->regulator_init_data;
+ else
+ cfg.init_data = &bq24190_vbus_init_data;
+ cfg.driver_data = bdi;
+ reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+ }
+
+ return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ return 0;
+}
+#endif
+
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
{
int ret;
u8 v;
@@ -523,9 +633,52 @@ static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+ /*
+ * According to the "Host Mode and default Mode" section of the
+ * manual, a write to any register causes the bq24190 to switch
+ * from default mode to host mode. It will switch back to default
+ * mode after a WDT timeout unless the WDT is turned off as well.
+ * So, by simply turning off the WDT, we accomplish both with the
+ * same write.
+ */
v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
- return bq24190_write(bdi, BQ24190_REG_CTTC, v);
+ ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+ if (ret < 0)
+ return ret;
+
+ if (bdi->sys_min) {
+ v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_SYS_MIN_MASK,
+ BQ24190_REG_POC_SYS_MIN_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (bdi->iprechg) {
+ v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
+ ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_IPRECHG_MASK,
+ BQ24190_REG_PCTCC_IPRECHG_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (bdi->iterm) {
+ v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
+ ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_ITERM_MASK,
+ BQ24190_REG_PCTCC_ITERM_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
}
static int bq24190_register_reset(struct bq24190_dev_info *bdi)
@@ -773,6 +926,38 @@ static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
return bq24190_battery_set_temp_alert_max(bdi, val);
}
+static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_IPRECHG_MASK,
+ BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ++v * 128 * 1000;
+ return 0;
+}
+
+static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_ITERM_MASK,
+ BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ++v * 128 * 1000;
+ return 0;
+}
+
static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
@@ -865,6 +1050,33 @@ static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
}
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int iinlimit, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+ if (ret < 0)
+ return ret;
+
+ val->intval = iinlimit;
+ return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
static int bq24190_charger_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
@@ -893,6 +1105,12 @@ static int bq24190_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = bq24190_charger_get_temp_alert_max(bdi, val);
break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq24190_charger_get_precharge(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = bq24190_charger_get_charge_term(bdi, val);
+ break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
ret = bq24190_charger_get_current(bdi, val);
break;
@@ -905,6 +1123,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
ret = bq24190_charger_get_voltage_max(bdi, val);
break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_get_iinlimit(bdi, val);
+ break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
ret = 0;
@@ -956,6 +1177,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq24190_charger_set_voltage(bdi, val);
break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_set_iinlimit(bdi, val);
+ break;
default:
ret = -EINVAL;
}
@@ -977,6 +1201,7 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
case POWER_SUPPLY_PROP_CHARGE_TYPE:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = 1;
break;
default:
@@ -986,16 +1211,45 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
return ret;
}
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(work, struct bq24190_dev_info,
+ input_current_limit_work.work);
+
+ power_supply_set_input_current_limit_from_supplier(bdi->charger);
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+ /*
+ * The Power-Good detection may take up to 220ms, sometimes
+ * the external charger detection is quicker, and the bq24190 will
+ * reset to iinlim based on its own charger detection (which is not
+ * hooked up when using external charger detection) resulting in a
+ * too low default 500mA iinlim. Delay setting the input-current-limit
+ * for 300ms to avoid this.
+ */
+ queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+ msecs_to_jiffies(300));
+}
+
static enum power_supply_property bq24190_charger_properties[] = {
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
@@ -1013,6 +1267,7 @@ static const struct power_supply_desc bq24190_charger_desc = {
.get_property = bq24190_charger_get_property,
.set_property = bq24190_charger_set_property,
.property_is_writeable = bq24190_charger_property_is_writeable,
+ .external_power_changed = bq24190_charger_external_power_changed,
};
/* Battery power supply property routines */
@@ -1460,13 +1715,50 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
if (ret < 0)
return ret;
- ret = bq24190_set_mode_host(bdi);
+ ret = bq24190_set_config(bdi);
if (ret < 0)
return ret;
return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
}
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+ const char * const s = "ti,system-minimum-microvolt";
+ struct power_supply_battery_info info = {};
+ int v;
+
+ if (device_property_read_u32(bdi->dev, s, &v) == 0) {
+ v /= 1000;
+ if (v >= BQ24190_REG_POC_SYS_MIN_MIN
+ && v <= BQ24190_REG_POC_SYS_MIN_MAX)
+ bdi->sys_min = v;
+ else
+ dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
+ }
+
+ if (bdi->dev->of_node &&
+ !power_supply_get_battery_info(bdi->charger, &info)) {
+ v = info.precharge_current_ua / 1000;
+ if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
+ && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
+ bdi->iprechg = v;
+ else
+ dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
+ v);
+
+ v = info.charge_term_current_ua / 1000;
+ if (v >= BQ24190_REG_PCTCC_ITERM_MIN
+ && v <= BQ24190_REG_PCTCC_ITERM_MAX)
+ bdi->iterm = v;
+ else
+ dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
+ v);
+ }
+
+ return 0;
+}
+
static int bq24190_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1494,10 +1786,12 @@ static int bq24190_probe(struct i2c_client *client,
mutex_init(&bdi->f_reg_lock);
bdi->f_reg = 0;
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+ INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+ bq24190_input_current_limit_work);
i2c_set_clientdata(client, bdi);
- if (!client->irq) {
+ if (client->irq <= 0) {
dev_err(dev, "Can't get irq info\n");
return -EINVAL;
}
@@ -1530,13 +1824,8 @@ static int bq24190_probe(struct i2c_client *client,
goto out_pmrt;
}
- ret = bq24190_hw_init(bdi);
- if (ret < 0) {
- dev_err(dev, "Hardware init failed\n");
- goto out_pmrt;
- }
-
charger_cfg.drv_data = bdi;
+ charger_cfg.of_node = dev->of_node;
charger_cfg.supplied_to = bq24190_charger_supplied_to;
charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to),
bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
@@ -1560,8 +1849,20 @@ static int bq24190_probe(struct i2c_client *client,
}
}
+ ret = bq24190_get_config(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't get devicetree config\n");
+ goto out_charger;
+ }
+
+ ret = bq24190_hw_init(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Hardware init failed\n");
+ goto out_charger;
+ }
+
ret = bq24190_sysfs_create_group(bdi);
- if (ret) {
+ if (ret < 0) {
dev_err(dev, "Can't create sysfs entries\n");
goto out_charger;
}
@@ -1577,6 +1878,10 @@ static int bq24190_probe(struct i2c_client *client,
goto out_sysfs;
}
+ ret = bq24190_register_vbus_regulator(bdi);
+ if (ret < 0)
+ goto out_sysfs;
+
if (bdi->extcon) {
INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work);
bdi->extcon_nb.notifier_call = bq24190_extcon_event;
@@ -1704,7 +2009,7 @@ static __maybe_unused int bq24190_pm_resume(struct device *dev)
}
bq24190_register_reset(bdi);
- bq24190_set_mode_host(bdi);
+ bq24190_set_config(bdi);
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
if (error >= 0) {
@@ -1736,6 +2041,7 @@ MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
#ifdef CONFIG_OF
static const struct of_device_id bq24190_of_match[] = {
{ .compatible = "ti,bq24190", },
+ { .compatible = "ti,bq24192i", },
{ },
};
MODULE_DEVICE_TABLE(of, bq24190_of_match);
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index ed44439d0112..51f0961ecf3e 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -58,8 +58,6 @@
#include <linux/power/bq27xxx_battery.h>
-#define DRIVER_VERSION "1.2.0"
-
#define BQ27XXX_MANUFACTURER "Texas Instruments"
/* BQ27XXX Flags */
@@ -132,8 +130,8 @@ enum bq27xxx_reg_index {
[BQ27XXX_DM_CKSUM] = 0x60
/* Register mappings */
-static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
- [BQ27000] = {
+static u8
+ bq27000_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -157,7 +155,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
},
- [BQ27010] = {
+ bq27010_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -181,7 +179,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
},
- [BQ2750X] = {
+ bq2750x_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -201,47 +199,9 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
BQ27XXX_DM_REG_ROWS,
},
- [BQ2751X] = {
- [BQ27XXX_REG_CTRL] = 0x00,
- [BQ27XXX_REG_TEMP] = 0x06,
- [BQ27XXX_REG_INT_TEMP] = 0x28,
- [BQ27XXX_REG_VOLT] = 0x08,
- [BQ27XXX_REG_AI] = 0x14,
- [BQ27XXX_REG_FLAGS] = 0x0a,
- [BQ27XXX_REG_TTE] = 0x16,
- [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
- [BQ27XXX_REG_TTES] = 0x1a,
- [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
- [BQ27XXX_REG_NAC] = 0x0c,
- [BQ27XXX_REG_FCC] = 0x12,
- [BQ27XXX_REG_CYCT] = 0x1e,
- [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
- [BQ27XXX_REG_SOC] = 0x20,
- [BQ27XXX_REG_DCAP] = 0x2e,
- [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
- BQ27XXX_DM_REG_ROWS,
- },
- [BQ27500] = {
- [BQ27XXX_REG_CTRL] = 0x00,
- [BQ27XXX_REG_TEMP] = 0x06,
- [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
- [BQ27XXX_REG_VOLT] = 0x08,
- [BQ27XXX_REG_AI] = 0x14,
- [BQ27XXX_REG_FLAGS] = 0x0a,
- [BQ27XXX_REG_TTE] = 0x16,
- [BQ27XXX_REG_TTF] = 0x18,
- [BQ27XXX_REG_TTES] = 0x1c,
- [BQ27XXX_REG_TTECP] = 0x26,
- [BQ27XXX_REG_NAC] = 0x0c,
- [BQ27XXX_REG_FCC] = 0x12,
- [BQ27XXX_REG_CYCT] = 0x2a,
- [BQ27XXX_REG_AE] = 0x22,
- [BQ27XXX_REG_SOC] = 0x2c,
- [BQ27XXX_REG_DCAP] = 0x3c,
- [BQ27XXX_REG_AP] = 0x24,
- BQ27XXX_DM_REG_ROWS,
- },
- [BQ27510G1] = {
+#define bq2751x_regs bq27510g3_regs
+#define bq2752x_regs bq27510g3_regs
+ bq27500_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -261,27 +221,9 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27510G2] = {
- [BQ27XXX_REG_CTRL] = 0x00,
- [BQ27XXX_REG_TEMP] = 0x06,
- [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
- [BQ27XXX_REG_VOLT] = 0x08,
- [BQ27XXX_REG_AI] = 0x14,
- [BQ27XXX_REG_FLAGS] = 0x0a,
- [BQ27XXX_REG_TTE] = 0x16,
- [BQ27XXX_REG_TTF] = 0x18,
- [BQ27XXX_REG_TTES] = 0x1c,
- [BQ27XXX_REG_TTECP] = 0x26,
- [BQ27XXX_REG_NAC] = 0x0c,
- [BQ27XXX_REG_FCC] = 0x12,
- [BQ27XXX_REG_CYCT] = 0x2a,
- [BQ27XXX_REG_AE] = 0x22,
- [BQ27XXX_REG_SOC] = 0x2c,
- [BQ27XXX_REG_DCAP] = 0x3c,
- [BQ27XXX_REG_AP] = 0x24,
- BQ27XXX_DM_REG_ROWS,
- },
- [BQ27510G3] = {
+#define bq27510g1_regs bq27500_regs
+#define bq27510g2_regs bq27500_regs
+ bq27510g3_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -301,7 +243,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27520G1] = {
+ bq27520g1_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -321,7 +263,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27520G2] = {
+ bq27520g2_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x36,
@@ -341,7 +283,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27520G3] = {
+ bq27520g3_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x36,
@@ -361,7 +303,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27520G4] = {
+ bq27520g4_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -381,7 +323,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27530] = {
+ bq27530_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x32,
@@ -401,7 +343,8 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27541] = {
+#define bq27531_regs bq27530_regs
+ bq27541_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -421,7 +364,10 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27545] = {
+#define bq27542_regs bq27541_regs
+#define bq27546_regs bq27541_regs
+#define bq27742_regs bq27541_regs
+ bq27545_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -441,7 +387,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_AP] = 0x24,
BQ27XXX_DM_REG_ROWS,
},
- [BQ27421] = {
+ bq27421_regs[BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x02,
[BQ27XXX_REG_INT_TEMP] = 0x1e,
@@ -460,10 +406,12 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = 0x18,
BQ27XXX_DM_REG_ROWS,
- },
-};
+ };
+#define bq27425_regs bq27421_regs
+#define bq27441_regs bq27421_regs
+#define bq27621_regs bq27421_regs
-static enum power_supply_property bq27000_battery_props[] = {
+static enum power_supply_property bq27000_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -485,7 +433,7 @@ static enum power_supply_property bq27000_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27010_battery_props[] = {
+static enum power_supply_property bq27010_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -505,25 +453,11 @@ static enum power_supply_property bq27010_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq2750x_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_MANUFACTURER,
-};
+#define bq2750x_props bq27510g3_props
+#define bq2751x_props bq27510g3_props
+#define bq2752x_props bq27510g3_props
-static enum power_supply_property bq2751x_battery_props[] = {
+static enum power_supply_property bq27500_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -532,16 +466,21 @@ static enum power_supply_property bq2751x_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#define bq27510g1_props bq27500_props
+#define bq27510g2_props bq27500_props
-static enum power_supply_property bq27500_battery_props[] = {
+static enum power_supply_property bq27510g3_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -550,19 +489,16 @@ static enum power_supply_property bq27500_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_ENERGY_NOW,
- POWER_SUPPLY_PROP_POWER_AVG,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27510g1_battery_props[] = {
+static enum power_supply_property bq27520g1_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -576,14 +512,15 @@ static enum power_supply_property bq27510g1_battery_props[] = {
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_POWER_AVG,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27510g2_battery_props[] = {
+#define bq27520g2_props bq27500_props
+
+static enum power_supply_property bq27520g3_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -592,7 +529,6 @@ static enum power_supply_property bq27510g2_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
@@ -604,7 +540,7 @@ static enum power_supply_property bq27510g2_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27510g3_battery_props[] = {
+static enum power_supply_property bq27520g4_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -616,13 +552,12 @@ static enum power_supply_property bq27510g3_battery_props[] = {
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27520g1_battery_props[] = {
+static enum power_supply_property bq27530_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -631,18 +566,17 @@ static enum power_supply_property bq27520g1_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_POWER_AVG,
POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#define bq27531_props bq27530_props
-static enum power_supply_property bq27520g2_battery_props[] = {
+static enum power_supply_property bq27541_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -651,19 +585,20 @@ static enum power_supply_property bq27520g2_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_POWER_AVG,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#define bq27542_props bq27541_props
+#define bq27546_props bq27541_props
+#define bq27742_props bq27541_props
-static enum power_supply_property bq27520g3_battery_props[] = {
+static enum power_supply_property bq27545_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -675,15 +610,13 @@ static enum power_supply_property bq27520g3_battery_props[] = {
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_POWER_AVG,
- POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27520g4_battery_props[] = {
+static enum power_supply_property bq27421_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -691,111 +624,144 @@ static enum power_supply_property bq27520g4_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#define bq27425_props bq27421_props
+#define bq27441_props bq27421_props
+#define bq27621_props bq27421_props
-static enum power_supply_property bq27530_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_POWER_AVG,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_MANUFACTURER,
+struct bq27xxx_dm_reg {
+ u8 subclass_id;
+ u8 offset;
+ u8 bytes;
+ u16 min, max;
};
-static enum power_supply_property bq27541_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_POWER_AVG,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_MANUFACTURER,
+enum bq27xxx_dm_reg_id {
+ BQ27XXX_DM_DESIGN_CAPACITY = 0,
+ BQ27XXX_DM_DESIGN_ENERGY,
+ BQ27XXX_DM_TERMINATE_VOLTAGE,
};
-static enum power_supply_property bq27545_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_CYCLE_COUNT,
- POWER_SUPPLY_PROP_POWER_AVG,
- POWER_SUPPLY_PROP_MANUFACTURER,
+#define bq27000_dm_regs 0
+#define bq27010_dm_regs 0
+#define bq2750x_dm_regs 0
+#define bq2751x_dm_regs 0
+#define bq2752x_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 48, 10, 2, 0, 65535 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { }, /* missing on chip */
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 48, 2, 1000, 32767 },
};
+#else
+#define bq27500_dm_regs 0
+#endif
-static enum power_supply_property bq27421_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_CHARGE_FULL,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_MANUFACTURER,
+/* todo create data memory definitions from datasheets and test on chips */
+#define bq27510g1_dm_regs 0
+#define bq27510g2_dm_regs 0
+#define bq27510g3_dm_regs 0
+#define bq27520g1_dm_regs 0
+#define bq27520g2_dm_regs 0
+#define bq27520g3_dm_regs 0
+#define bq27520g4_dm_regs 0
+#define bq27530_dm_regs 0
+#define bq27531_dm_regs 0
+#define bq27541_dm_regs 0
+#define bq27542_dm_regs 0
+#define bq27546_dm_regs 0
+#define bq27742_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27545_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 48, 23, 2, 0, 32767 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 48, 25, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 67, 2, 2800, 3700 },
};
+#else
+#define bq27545_dm_regs 0
+#endif
-#define BQ27XXX_PROP(_id, _prop) \
- [_id] = { \
- .props = _prop, \
- .size = ARRAY_SIZE(_prop), \
- }
+static struct bq27xxx_dm_reg bq27421_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 10, 2, 0, 8000 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 12, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2500, 3700 },
+};
+
+static struct bq27xxx_dm_reg bq27425_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 12, 2, 0, 32767 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 14, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 18, 2, 2800, 3700 },
+};
+
+#if 0 /* not yet tested */
+#define bq27441_dm_regs bq27421_dm_regs
+#else
+#define bq27441_dm_regs 0
+#endif
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 3, 2, 0, 8000 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 5, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 9, 2, 2500, 3700 },
+};
+#else
+#define bq27621_dm_regs 0
+#endif
+
+#define BQ27XXX_O_ZERO 0x00000001
+#define BQ27XXX_O_OTDC 0x00000002
+#define BQ27XXX_O_UTOT 0x00000004
+#define BQ27XXX_O_CFGUP 0x00000008
+#define BQ27XXX_O_RAM 0x00000010
+
+#define BQ27XXX_DATA(ref, key, opt) { \
+ .opts = (opt), \
+ .unseal_key = key, \
+ .regs = ref##_regs, \
+ .dm_regs = ref##_dm_regs, \
+ .props = ref##_props, \
+ .props_size = ARRAY_SIZE(ref##_props) }
static struct {
+ u32 opts;
+ u32 unseal_key;
+ u8 *regs;
+ struct bq27xxx_dm_reg *dm_regs;
enum power_supply_property *props;
- size_t size;
-} bq27xxx_battery_props[] = {
- BQ27XXX_PROP(BQ27000, bq27000_battery_props),
- BQ27XXX_PROP(BQ27010, bq27010_battery_props),
- BQ27XXX_PROP(BQ2750X, bq2750x_battery_props),
- BQ27XXX_PROP(BQ2751X, bq2751x_battery_props),
- BQ27XXX_PROP(BQ27500, bq27500_battery_props),
- BQ27XXX_PROP(BQ27510G1, bq27510g1_battery_props),
- BQ27XXX_PROP(BQ27510G2, bq27510g2_battery_props),
- BQ27XXX_PROP(BQ27510G3, bq27510g3_battery_props),
- BQ27XXX_PROP(BQ27520G1, bq27520g1_battery_props),
- BQ27XXX_PROP(BQ27520G2, bq27520g2_battery_props),
- BQ27XXX_PROP(BQ27520G3, bq27520g3_battery_props),
- BQ27XXX_PROP(BQ27520G4, bq27520g4_battery_props),
- BQ27XXX_PROP(BQ27530, bq27530_battery_props),
- BQ27XXX_PROP(BQ27541, bq27541_battery_props),
- BQ27XXX_PROP(BQ27545, bq27545_battery_props),
- BQ27XXX_PROP(BQ27421, bq27421_battery_props),
+ size_t props_size;
+} bq27xxx_chip_data[] = {
+ [BQ27000] = BQ27XXX_DATA(bq27000, 0 , BQ27XXX_O_ZERO),
+ [BQ27010] = BQ27XXX_DATA(bq27010, 0 , BQ27XXX_O_ZERO),
+ [BQ2750X] = BQ27XXX_DATA(bq2750x, 0 , BQ27XXX_O_OTDC),
+ [BQ2751X] = BQ27XXX_DATA(bq2751x, 0 , BQ27XXX_O_OTDC),
+ [BQ2752X] = BQ27XXX_DATA(bq2752x, 0 , BQ27XXX_O_OTDC),
+ [BQ27500] = BQ27XXX_DATA(bq27500, 0x04143672, BQ27XXX_O_OTDC),
+ [BQ27510G1] = BQ27XXX_DATA(bq27510g1, 0 , BQ27XXX_O_OTDC),
+ [BQ27510G2] = BQ27XXX_DATA(bq27510g2, 0 , BQ27XXX_O_OTDC),
+ [BQ27510G3] = BQ27XXX_DATA(bq27510g3, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G1] = BQ27XXX_DATA(bq27520g1, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0 , BQ27XXX_O_OTDC),
+ [BQ27530] = BQ27XXX_DATA(bq27530, 0 , BQ27XXX_O_UTOT),
+ [BQ27531] = BQ27XXX_DATA(bq27531, 0 , BQ27XXX_O_UTOT),
+ [BQ27541] = BQ27XXX_DATA(bq27541, 0 , BQ27XXX_O_OTDC),
+ [BQ27542] = BQ27XXX_DATA(bq27542, 0 , BQ27XXX_O_OTDC),
+ [BQ27546] = BQ27XXX_DATA(bq27546, 0 , BQ27XXX_O_OTDC),
+ [BQ27742] = BQ27XXX_DATA(bq27742, 0 , BQ27XXX_O_OTDC),
+ [BQ27545] = BQ27XXX_DATA(bq27545, 0x04143672, BQ27XXX_O_OTDC),
+ [BQ27421] = BQ27XXX_DATA(bq27421, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27425] = BQ27XXX_DATA(bq27425, 0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP),
+ [BQ27441] = BQ27XXX_DATA(bq27441, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27621] = BQ27XXX_DATA(bq27621, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
};
static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -805,13 +771,6 @@ static LIST_HEAD(bq27xxx_battery_devices);
#define BQ27XXX_DM_SZ 32
-struct bq27xxx_dm_reg {
- u8 subclass_id;
- u8 offset;
- u8 bytes;
- u16 min, max;
-};
-
/**
* struct bq27xxx_dm_buf - chip data memory buffer
* @class: data memory subclass_id
@@ -844,12 +803,6 @@ static inline u16 *bq27xxx_dm_reg_ptr(struct bq27xxx_dm_buf *buf,
return NULL;
}
-enum bq27xxx_dm_reg_id {
- BQ27XXX_DM_DESIGN_CAPACITY = 0,
- BQ27XXX_DM_DESIGN_ENERGY,
- BQ27XXX_DM_TERMINATE_VOLTAGE,
-};
-
static const char * const bq27xxx_dm_reg_name[] = {
[BQ27XXX_DM_DESIGN_CAPACITY] = "design-capacity",
[BQ27XXX_DM_DESIGN_ENERGY] = "design-energy",
@@ -1092,9 +1045,9 @@ static void bq27xxx_battery_update_dm_block(struct bq27xxx_device_info *di,
}
#ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
- if (!di->ram_chip && !bq27xxx_dt_to_nvm) {
+ if (!(di->opts & BQ27XXX_O_RAM) && !bq27xxx_dt_to_nvm) {
#else
- if (!di->ram_chip) {
+ if (!(di->opts & BQ27XXX_O_RAM)) {
#endif
/* devicetree and NVM differ; defer to NVM */
dev_warn(di->dev, "%s has %u; update to %u disallowed "
@@ -1130,7 +1083,7 @@ static int bq27xxx_battery_cfgupdate_priv(struct bq27xxx_device_info *di, bool a
return ret;
} while (!!(ret & BQ27XXX_FLAG_CFGUP) != active && --try);
- if (!try) {
+ if (!try && di->chip != BQ27425) { // 425 has a bug
dev_err(di->dev, "timed out waiting for cfgupdate flag %d\n", active);
return -EINVAL;
}
@@ -1162,7 +1115,7 @@ static inline int bq27xxx_battery_soft_reset(struct bq27xxx_device_info *di)
static int bq27xxx_battery_write_dm_block(struct bq27xxx_device_info *di,
struct bq27xxx_dm_buf *buf)
{
- bool cfgup = di->chip == BQ27421; /* assume related chips need cfgupdate */
+ bool cfgup = di->opts & BQ27XXX_O_CFGUP;
int ret;
if (!buf->dirty)
@@ -1261,7 +1214,7 @@ static void bq27xxx_battery_set_config(struct bq27xxx_device_info *di,
bq27xxx_battery_seal(di);
- if (updated && di->chip != BQ27421) { /* not a cfgupdate chip, so reset */
+ if (updated && !(di->opts & BQ27XXX_O_CFGUP)) {
bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_RESET, false);
BQ27XXX_MSLEEP(300); /* reset time is not documented */
}
@@ -1328,7 +1281,7 @@ static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
{
int soc;
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
else
soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
@@ -1354,7 +1307,7 @@ static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
return charge;
}
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
charge *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
else
charge *= 1000;
@@ -1370,7 +1323,7 @@ static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
{
int flags;
- if (di->chip == BQ27000 || di->chip == BQ27010) {
+ if (di->opts & BQ27XXX_O_ZERO) {
flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
if (flags >= 0 && (flags & BQ27000_FLAG_CI))
return -ENODATA;
@@ -1396,7 +1349,7 @@ static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
{
int dcap;
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, true);
else
dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false);
@@ -1406,7 +1359,7 @@ static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
return dcap;
}
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
dcap = (dcap << 8) * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
else
dcap *= 1000;
@@ -1428,7 +1381,7 @@ static int bq27xxx_battery_read_energy(struct bq27xxx_device_info *di)
return ae;
}
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
ae *= BQ27XXX_POWER_CONSTANT / BQ27XXX_RS;
else
ae *= 1000;
@@ -1450,7 +1403,7 @@ static int bq27xxx_battery_read_temperature(struct bq27xxx_device_info *di)
return temp;
}
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
temp = 5 * temp / 2;
return temp;
@@ -1507,7 +1460,7 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
return tval;
}
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
return (tval * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
else
return tval;
@@ -1518,26 +1471,12 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
*/
static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
{
- switch (di->chip) {
- case BQ2750X:
- case BQ2751X:
- case BQ27500:
- case BQ27510G1:
- case BQ27510G2:
- case BQ27510G3:
- case BQ27520G1:
- case BQ27520G2:
- case BQ27520G3:
- case BQ27520G4:
- case BQ27541:
- case BQ27545:
+ if (di->opts & BQ27XXX_O_OTDC)
return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
- case BQ27530:
- case BQ27421:
+ if (di->opts & BQ27XXX_O_UTOT)
return flags & BQ27XXX_FLAG_OT;
- default:
- return false;
- }
+
+ return false;
}
/*
@@ -1545,7 +1484,7 @@ static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
*/
static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
{
- if (di->chip == BQ27530 || di->chip == BQ27421)
+ if (di->opts & BQ27XXX_O_UTOT)
return flags & BQ27XXX_FLAG_UT;
return false;
@@ -1556,7 +1495,7 @@ static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
*/
static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
{
- if (di->chip == BQ27000 || di->chip == BQ27010)
+ if (di->opts & BQ27XXX_O_ZERO)
return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF);
else
return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
@@ -1569,7 +1508,7 @@ static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
{
int flags;
- bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
+ bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
if (flags < 0) {
@@ -1591,8 +1530,8 @@ static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
void bq27xxx_battery_update(struct bq27xxx_device_info *di)
{
struct bq27xxx_reg_cache cache = {0, };
- bool has_ci_flag = di->chip == BQ27000 || di->chip == BQ27010;
- bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
+ bool has_ci_flag = di->opts & BQ27XXX_O_ZERO;
+ bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
if ((cache.flags & 0xff) == 0xff)
@@ -1670,7 +1609,7 @@ static int bq27xxx_battery_current(struct bq27xxx_device_info *di,
return curr;
}
- if (di->chip == BQ27000 || di->chip == BQ27010) {
+ if (di->opts & BQ27XXX_O_ZERO) {
flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
if (flags & BQ27000_FLAG_CHGS) {
dev_dbg(di->dev, "negative current!\n");
@@ -1691,7 +1630,7 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
{
int status;
- if (di->chip == BQ27000 || di->chip == BQ27010) {
+ if (di->opts & BQ27XXX_O_ZERO) {
if (di->cache.flags & BQ27000_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
else if (di->cache.flags & BQ27000_FLAG_CHGS)
@@ -1719,7 +1658,7 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
{
int level;
- if (di->chip == BQ27000 || di->chip == BQ27010) {
+ if (di->opts & BQ27XXX_O_ZERO) {
if (di->cache.flags & BQ27000_FLAG_FC)
level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
else if (di->cache.flags & BQ27000_FLAG_EDV1)
@@ -1884,7 +1823,11 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
INIT_DELAYED_WORK(&di->work, bq27xxx_battery_poll);
mutex_init(&di->lock);
- di->regs = bq27xxx_regs[di->chip];
+
+ di->regs = bq27xxx_chip_data[di->chip].regs;
+ di->unseal_key = bq27xxx_chip_data[di->chip].unseal_key;
+ di->dm_regs = bq27xxx_chip_data[di->chip].dm_regs;
+ di->opts = bq27xxx_chip_data[di->chip].opts;
psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL);
if (!psy_desc)
@@ -1892,8 +1835,8 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
psy_desc->name = di->name;
psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
- psy_desc->properties = bq27xxx_battery_props[di->chip].props;
- psy_desc->num_properties = bq27xxx_battery_props[di->chip].size;
+ psy_desc->properties = bq27xxx_chip_data[di->chip].props;
+ psy_desc->num_properties = bq27xxx_chip_data[di->chip].props_size;
psy_desc->get_property = bq27xxx_battery_get_property;
psy_desc->external_power_changed = bq27xxx_external_power_changed;
@@ -1903,8 +1846,6 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
return PTR_ERR(di->bat);
}
- dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION);
-
bq27xxx_battery_settings(di);
bq27xxx_battery_update(di);
@@ -1938,110 +1879,6 @@ void bq27xxx_battery_teardown(struct bq27xxx_device_info *di)
}
EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown);
-static int bq27xxx_battery_platform_read(struct bq27xxx_device_info *di, u8 reg,
- bool single)
-{
- struct device *dev = di->dev;
- struct bq27xxx_platform_data *pdata = dev->platform_data;
- unsigned int timeout = 3;
- int upper, lower;
- int temp;
-
- if (!single) {
- /* Make sure the value has not changed in between reading the
- * lower and the upper part */
- upper = pdata->read(dev, reg + 1);
- do {
- temp = upper;
- if (upper < 0)
- return upper;
-
- lower = pdata->read(dev, reg);
- if (lower < 0)
- return lower;
-
- upper = pdata->read(dev, reg + 1);
- } while (temp != upper && --timeout);
-
- if (timeout == 0)
- return -EIO;
-
- return (upper << 8) | lower;
- }
-
- return pdata->read(dev, reg);
-}
-
-static int bq27xxx_battery_platform_probe(struct platform_device *pdev)
-{
- struct bq27xxx_device_info *di;
- struct bq27xxx_platform_data *pdata = pdev->dev.platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "no platform_data supplied\n");
- return -EINVAL;
- }
-
- if (!pdata->read) {
- dev_err(&pdev->dev, "no hdq read callback supplied\n");
- return -EINVAL;
- }
-
- if (!pdata->chip) {
- dev_err(&pdev->dev, "no device supplied\n");
- return -EINVAL;
- }
-
- di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
- if (!di)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, di);
-
- di->dev = &pdev->dev;
- di->chip = pdata->chip;
- di->name = pdata->name ?: dev_name(&pdev->dev);
- di->bus.read = bq27xxx_battery_platform_read;
-
- return bq27xxx_battery_setup(di);
-}
-
-static int bq27xxx_battery_platform_remove(struct platform_device *pdev)
-{
- struct bq27xxx_device_info *di = platform_get_drvdata(pdev);
-
- bq27xxx_battery_teardown(di);
-
- return 0;
-}
-
-static const struct platform_device_id bq27xxx_battery_platform_id_table[] = {
- { "bq27000-battery", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(platform, bq27xxx_battery_platform_id_table);
-
-#ifdef CONFIG_OF
-static const struct of_device_id bq27xxx_battery_platform_of_match_table[] = {
- { .compatible = "ti,bq27000" },
- {},
-};
-MODULE_DEVICE_TABLE(of, bq27xxx_battery_platform_of_match_table);
-#endif
-
-static struct platform_driver bq27xxx_battery_platform_driver = {
- .probe = bq27xxx_battery_platform_probe,
- .remove = bq27xxx_battery_platform_remove,
- .driver = {
- .name = "bq27000-battery",
- .of_match_table = of_match_ptr(bq27xxx_battery_platform_of_match_table),
- },
- .id_table = bq27xxx_battery_platform_id_table,
-};
-module_platform_driver(bq27xxx_battery_platform_driver);
-
-MODULE_ALIAS("platform:bq27000-battery");
-
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
MODULE_DESCRIPTION("BQ27xxx battery monitor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq27xxx_battery_hdq.c b/drivers/power/supply/bq27xxx_battery_hdq.c
new file mode 100644
index 000000000000..9aff896c9802
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery_hdq.c
@@ -0,0 +1,135 @@
+/*
+ * BQ27xxx battery monitor HDQ/1-wire driver
+ *
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power/bq27xxx_battery.h>
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000 0x01
+
+#define HDQ_CMD_READ (0 << 7)
+#define HDQ_CMD_WRITE (1 << 7)
+
+static int F_ID;
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ27xxx device");
+
+static int w1_bq27000_read(struct w1_slave *sl, unsigned int reg)
+{
+ u8 val;
+
+ mutex_lock(&sl->master->bus_mutex);
+ w1_write_8(sl->master, HDQ_CMD_READ | reg);
+ val = w1_read_8(sl->master);
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return val;
+}
+
+static int bq27xxx_battery_hdq_read(struct bq27xxx_device_info *di, u8 reg,
+ bool single)
+{
+ struct w1_slave *sl = dev_to_w1_slave(di->dev);
+ unsigned int timeout = 3;
+ int upper, lower;
+ int temp;
+
+ if (!single) {
+ /*
+ * Make sure the value has not changed in between reading the
+ * lower and the upper part
+ */
+ upper = w1_bq27000_read(sl, reg + 1);
+ do {
+ temp = upper;
+ if (upper < 0)
+ return upper;
+
+ lower = w1_bq27000_read(sl, reg);
+ if (lower < 0)
+ return lower;
+
+ upper = w1_bq27000_read(sl, reg + 1);
+ } while (temp != upper && --timeout);
+
+ if (timeout == 0)
+ return -EIO;
+
+ return (upper << 8) | lower;
+ }
+
+ return w1_bq27000_read(sl, reg);
+}
+
+static int bq27xxx_battery_hdq_add_slave(struct w1_slave *sl)
+{
+ struct bq27xxx_device_info *di;
+
+ di = devm_kzalloc(&sl->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ dev_set_drvdata(&sl->dev, di);
+
+ di->dev = &sl->dev;
+ di->chip = BQ27000;
+ di->name = "bq27000-battery";
+ di->bus.read = bq27xxx_battery_hdq_read;
+
+ return bq27xxx_battery_setup(di);
+}
+
+static void bq27xxx_battery_hdq_remove_slave(struct w1_slave *sl)
+{
+ struct bq27xxx_device_info *di = dev_get_drvdata(&sl->dev);
+
+ bq27xxx_battery_teardown(di);
+}
+
+static struct w1_family_ops bq27xxx_battery_hdq_fops = {
+ .add_slave = bq27xxx_battery_hdq_add_slave,
+ .remove_slave = bq27xxx_battery_hdq_remove_slave,
+};
+
+static struct w1_family bq27xxx_battery_hdq_family = {
+ .fid = W1_FAMILY_BQ27000,
+ .fops = &bq27xxx_battery_hdq_fops,
+};
+
+static int __init bq27xxx_battery_hdq_init(void)
+{
+ if (F_ID)
+ bq27xxx_battery_hdq_family.fid = F_ID;
+
+ return w1_register_family(&bq27xxx_battery_hdq_family);
+}
+module_init(bq27xxx_battery_hdq_init);
+
+static void __exit bq27xxx_battery_hdq_exit(void)
+{
+ w1_unregister_family(&bq27xxx_battery_hdq_family);
+}
+module_exit(bq27xxx_battery_hdq_exit);
+
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("BQ27xxx battery monitor HDQ/1-wire driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index a5972214f074..0b11ed472f33 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -230,7 +230,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27210", BQ27010 },
{ "bq27500", BQ2750X },
{ "bq27510", BQ2751X },
- { "bq27520", BQ2751X },
+ { "bq27520", BQ2752X },
{ "bq27500-1", BQ27500 },
{ "bq27510g1", BQ27510G1 },
{ "bq27510g2", BQ27510G2 },
@@ -240,16 +240,16 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27520g3", BQ27520G3 },
{ "bq27520g4", BQ27520G4 },
{ "bq27530", BQ27530 },
- { "bq27531", BQ27530 },
+ { "bq27531", BQ27531 },
{ "bq27541", BQ27541 },
- { "bq27542", BQ27541 },
- { "bq27546", BQ27541 },
- { "bq27742", BQ27541 },
+ { "bq27542", BQ27542 },
+ { "bq27546", BQ27546 },
+ { "bq27742", BQ27742 },
{ "bq27545", BQ27545 },
{ "bq27421", BQ27421 },
- { "bq27425", BQ27421 },
- { "bq27441", BQ27421 },
- { "bq27621", BQ27421 },
+ { "bq27425", BQ27425 },
+ { "bq27441", BQ27441 },
+ { "bq27621", BQ27621 },
{},
};
MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index adc3761831e1..6502fa7c2106 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -1632,8 +1632,7 @@ static int charger_manager_probe(struct platform_device *pdev)
return -ENODEV;
}
- cm = devm_kzalloc(&pdev->dev,
- sizeof(struct charger_manager), GFP_KERNEL);
+ cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
if (!cm)
return -ENOMEM;
@@ -1645,12 +1644,14 @@ static int charger_manager_probe(struct platform_device *pdev)
/* Initialize alarm timer */
if (alarmtimer_get_rtcdev()) {
cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+ if (!cm_timer)
+ return -ENOMEM;
alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
}
/*
- * The following two do not need to be errors.
- * Users may intentionally ignore those two features.
+ * Some of the following do not need to be errors.
+ * Users may intentionally ignore those features.
*/
if (desc->fullbatt_uV == 0) {
dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
diff --git a/drivers/power/supply/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c
index 8edd4aa5f475..e5d81b493c45 100644
--- a/drivers/power/supply/ds2780_battery.c
+++ b/drivers/power/supply/ds2780_battery.c
@@ -663,7 +663,7 @@ static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
return count;
}
-static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_param_eeprom_bin_attr = {
.attr = {
.name = "param_eeprom",
.mode = S_IRUGO | S_IWUSR,
@@ -708,7 +708,7 @@ static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
return count;
}
-static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_user_eeprom_bin_attr = {
.attr = {
.name = "user_eeprom",
.mode = S_IRUGO | S_IWUSR,
diff --git a/drivers/power/supply/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c
index 4400402f9ec5..efe83ef8670c 100644
--- a/drivers/power/supply/ds2781_battery.c
+++ b/drivers/power/supply/ds2781_battery.c
@@ -665,7 +665,7 @@ static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
return count;
}
-static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_param_eeprom_bin_attr = {
.attr = {
.name = "param_eeprom",
.mode = S_IRUGO | S_IWUSR,
@@ -711,7 +711,7 @@ static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
return count;
}
-static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_user_eeprom_bin_attr = {
.attr = {
.name = "user_eeprom",
.mode = S_IRUGO | S_IWUSR,
diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
index 677f7c40b25a..0f3432795f3c 100644
--- a/drivers/power/supply/lp8788-charger.c
+++ b/drivers/power/supply/lp8788-charger.c
@@ -626,7 +626,7 @@ static ssize_t lp8788_show_charger_status(struct device *dev,
{
struct lp8788_charger *pchg = dev_get_drvdata(dev);
enum lp8788_charging_state state;
- char *desc[LP8788_MAX_CHG_STATE] = {
+ static const char * const desc[LP8788_MAX_CHG_STATE] = {
[LP8788_OFF] = "CHARGER OFF",
[LP8788_WARM_UP] = "WARM UP",
[LP8788_LOW_INPUT] = "LOW INPUT STATE",
@@ -650,8 +650,10 @@ static ssize_t lp8788_show_eoc_time(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lp8788_charger *pchg = dev_get_drvdata(dev);
- char *stime[] = { "400ms", "5min", "10min", "15min",
- "20min", "25min", "30min", "No timeout" };
+ static const char * const stime[] = {
+ "400ms", "5min", "10min", "15min",
+ "20min", "25min", "30min", "No timeout"
+ };
u8 val;
lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
@@ -665,9 +667,13 @@ static ssize_t lp8788_show_eoc_level(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lp8788_charger *pchg = dev_get_drvdata(dev);
- char *abs_level[] = { "25mA", "49mA", "75mA", "98mA" };
- char *relative_level[] = { "5%", "10%", "15%", "20%" };
- char *level;
+ static const char * const abs_level[] = {
+ "25mA", "49mA", "75mA", "98mA"
+ };
+ static const char * const relative_level[] = {
+ "5%", "10%", "15%", "20%"
+ };
+ const char *level;
u8 val;
u8 mode;
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
index 7efb908f4451..08e4fd9ee607 100644
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -1,6 +1,6 @@
/*
- * I2C client/driver for the Linear Technology LTC2941 and LTC2943
- * Battery Gas Gauge IC
+ * I2C client/driver for the Linear Technology LTC2941, LTC2942, LTC2943
+ * and LTC2944 Battery Gas Gauge IC
*
* Copyright (C) 2014 Topic Embedded Systems
*
@@ -34,35 +34,39 @@ enum ltc294x_reg {
LTC294X_REG_CONTROL = 0x01,
LTC294X_REG_ACC_CHARGE_MSB = 0x02,
LTC294X_REG_ACC_CHARGE_LSB = 0x03,
- LTC294X_REG_THRESH_HIGH_MSB = 0x04,
- LTC294X_REG_THRESH_HIGH_LSB = 0x05,
- LTC294X_REG_THRESH_LOW_MSB = 0x06,
- LTC294X_REG_THRESH_LOW_LSB = 0x07,
- LTC294X_REG_VOLTAGE_MSB = 0x08,
- LTC294X_REG_VOLTAGE_LSB = 0x09,
- LTC294X_REG_CURRENT_MSB = 0x0E,
- LTC294X_REG_CURRENT_LSB = 0x0F,
- LTC294X_REG_TEMPERATURE_MSB = 0x14,
- LTC294X_REG_TEMPERATURE_LSB = 0x15,
+ LTC294X_REG_VOLTAGE_MSB = 0x08,
+ LTC294X_REG_VOLTAGE_LSB = 0x09,
+ LTC2942_REG_TEMPERATURE_MSB = 0x0C,
+ LTC2942_REG_TEMPERATURE_LSB = 0x0D,
+ LTC2943_REG_CURRENT_MSB = 0x0E,
+ LTC2943_REG_CURRENT_LSB = 0x0F,
+ LTC2943_REG_TEMPERATURE_MSB = 0x14,
+ LTC2943_REG_TEMPERATURE_LSB = 0x15,
};
-#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
-#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+enum ltc294x_id {
+ LTC2941_ID,
+ LTC2942_ID,
+ LTC2943_ID,
+ LTC2944_ID,
+};
+
+#define LTC2941_REG_STATUS_CHIP_ID BIT(7)
+
+#define LTC2942_REG_CONTROL_MODE_SCAN (BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
#define LTC294X_REG_CONTROL_PRESCALER_MASK (BIT(5) | BIT(4) | BIT(3))
#define LTC294X_REG_CONTROL_SHUTDOWN_MASK (BIT(0))
#define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED 0
-#define LTC2941_NUM_REGS 0x08
-#define LTC2943_NUM_REGS 0x18
-
struct ltc294x_info {
struct i2c_client *client; /* I2C Client pointer */
struct power_supply *supply; /* Supply pointer */
struct power_supply_desc supply_desc; /* Supply description */
struct delayed_work work; /* Work scheduler */
- unsigned long num_regs; /* Number of registers (chip type) */
+ enum ltc294x_id id; /* Chip type */
int charge; /* Last charge register content */
int r_sense; /* mOhm */
int Qlsb; /* nAh */
@@ -145,9 +149,18 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
- /* Put the 2943 into "monitor" mode, so it measures every 10 sec */
- if (info->num_regs == LTC2943_NUM_REGS)
+ /* Put device into "monitor" mode */
+ switch (info->id) {
+ case LTC2942_ID: /* 2942 measures every 2 sec */
+ control |= LTC2942_REG_CONTROL_MODE_SCAN;
+ break;
+ case LTC2943_ID:
+ case LTC2944_ID: /* 2943 and 2944 measure every 10 sec */
control |= LTC2943_REG_CONTROL_MODE_SCAN;
+ break;
+ default:
+ break;
+ }
if (value != control) {
ret = ltc294x_write_regs(info->client,
@@ -252,7 +265,24 @@ static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
ret = ltc294x_read_regs(info->client,
LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
value = (datar[0] << 8) | datar[1];
- *val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
+ switch (info->id) {
+ case LTC2943_ID:
+ value *= 23600 * 2;
+ value /= 0xFFFF;
+ value *= 1000 / 2;
+ break;
+ case LTC2944_ID:
+ value *= 70800 / 5*4;
+ value /= 0xFFFF;
+ value *= 1000 * 5/4;
+ break;
+ default:
+ value *= 6000 * 10;
+ value /= 0xFFFF;
+ value *= 1000 / 10;
+ break;
+ }
+ *val = value;
return ret;
}
@@ -263,27 +293,38 @@ static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
s32 value;
ret = ltc294x_read_regs(info->client,
- LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+ LTC2943_REG_CURRENT_MSB, &datar[0], 2);
value = (datar[0] << 8) | datar[1];
value -= 0x7FFF;
+ if (info->id == LTC2944_ID)
+ value *= 64000;
+ else
+ value *= 60000;
/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
* the formula below keeps everything in s32 range while preserving
* enough digits */
- *val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
+ *val = 1000 * (value / (info->r_sense * 0x7FFF)); /* in uA */
return ret;
}
static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
{
+ enum ltc294x_reg reg;
int ret;
u8 datar[2];
u32 value;
- ret = ltc294x_read_regs(info->client,
- LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
- value = (datar[0] << 8) | datar[1];
- /* Full-scale is 510 Kelvin, convert to centidegrees */
- *val = (((51000 * value) / 0xFFFF) - 27215);
+ if (info->id == LTC2942_ID) {
+ reg = LTC2942_REG_TEMPERATURE_MSB;
+ value = 60000; /* Full-scale is 600 Kelvin */
+ } else {
+ reg = LTC2943_REG_TEMPERATURE_MSB;
+ value = 51000; /* Full-scale is 510 Kelvin */
+ }
+ ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+ value *= (datar[0] << 8) | datar[1];
+ /* Convert to centidegrees */
+ *val = value / 0xFFFF - 27215;
return ret;
}
@@ -357,8 +398,8 @@ static enum power_supply_property ltc294x_properties[] = {
POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
};
static int ltc294x_i2c_remove(struct i2c_client *client)
@@ -375,10 +416,11 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
{
struct power_supply_config psy_cfg = {};
struct ltc294x_info *info;
+ struct device_node *np;
int ret;
u32 prescaler_exp;
s32 r_sense;
- struct device_node *np;
+ u8 status;
info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
if (info == NULL)
@@ -388,7 +430,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
np = of_node_get(client->dev.of_node);
- info->num_regs = (unsigned long)of_device_get_match_data(&client->dev);
+ info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
info->supply_desc.name = np->name;
/* r_sense can be negative, when sense+ is connected to the battery
@@ -409,7 +451,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
}
- if (info->num_regs == LTC2943_NUM_REGS) {
+ if (info->id == LTC2943_ID) {
if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
info->Qlsb = ((340 * 50000) / r_sense) /
@@ -421,21 +463,39 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
(128 / (1 << prescaler_exp));
}
+ /* Read status register to check for LTC2942 */
+ if (info->id == LTC2941_ID || info->id == LTC2942_ID) {
+ ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Could not read status register\n");
+ return ret;
+ }
+ if (status & LTC2941_REG_STATUS_CHIP_ID)
+ info->id = LTC2941_ID;
+ else
+ info->id = LTC2942_ID;
+ }
+
info->client = client;
info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
info->supply_desc.properties = ltc294x_properties;
- if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+ switch (info->id) {
+ case LTC2944_ID:
+ case LTC2943_ID:
info->supply_desc.num_properties =
ARRAY_SIZE(ltc294x_properties);
- else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
+ break;
+ case LTC2942_ID:
info->supply_desc.num_properties =
ARRAY_SIZE(ltc294x_properties) - 1;
- else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
- info->supply_desc.num_properties =
- ARRAY_SIZE(ltc294x_properties) - 2;
- else
+ break;
+ case LTC2941_ID:
+ default:
info->supply_desc.num_properties =
ARRAY_SIZE(ltc294x_properties) - 3;
+ break;
+ }
info->supply_desc.get_property = ltc294x_get_property;
info->supply_desc.set_property = ltc294x_set_property;
info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
@@ -492,8 +552,10 @@ static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
static const struct i2c_device_id ltc294x_i2c_id[] = {
- {"ltc2941", LTC2941_NUM_REGS},
- {"ltc2943", LTC2943_NUM_REGS},
+ { "ltc2941", LTC2941_ID, },
+ { "ltc2942", LTC2942_ID, },
+ { "ltc2943", LTC2943_ID, },
+ { "ltc2944", LTC2944_ID, },
{ },
};
MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
@@ -501,11 +563,19 @@ MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
static const struct of_device_id ltc294x_i2c_of_match[] = {
{
.compatible = "lltc,ltc2941",
- .data = (void *)LTC2941_NUM_REGS
+ .data = (void *)LTC2941_ID,
+ },
+ {
+ .compatible = "lltc,ltc2942",
+ .data = (void *)LTC2942_ID,
},
{
.compatible = "lltc,ltc2943",
- .data = (void *)LTC2943_NUM_REGS
+ .data = (void *)LTC2943_ID,
+ },
+ {
+ .compatible = "lltc,ltc2944",
+ .data = (void *)LTC2944_ID,
},
{ },
};
@@ -525,5 +595,5 @@ module_i2c_driver(ltc294x_driver);
MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
-MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
+MODULE_DESCRIPTION("LTC2941/LTC2942/LTC2943/LTC2944 Battery Gas Gauge IC driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index aecaaa2b0586..5b556a13f517 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -22,6 +22,7 @@
* This driver is based on max17040_battery.c
*/
+#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -982,6 +983,8 @@ static int max17042_probe(struct i2c_client *client,
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
struct power_supply_config psy_cfg = {};
+ const struct acpi_device_id *acpi_id = NULL;
+ struct device *dev = &client->dev;
struct max17042_chip *chip;
int ret;
int i;
@@ -995,7 +998,15 @@ static int max17042_probe(struct i2c_client *client,
return -ENOMEM;
chip->client = client;
- chip->chip_type = id->driver_data;
+ if (id) {
+ chip->chip_type = id->driver_data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id)
+ return -ENODEV;
+
+ chip->chip_type = acpi_id->driver_data;
+ }
chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
if (IS_ERR(chip->regmap)) {
dev_err(&client->dev, "Failed to initialize regmap\n");
@@ -1039,11 +1050,18 @@ static int max17042_probe(struct i2c_client *client,
}
if (client->irq) {
+ unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+
+ /*
+ * On ACPI systems the IRQ may be handled by ACPI-event code,
+ * so we need to share (if the ACPI code is willing to share).
+ */
+ if (acpi_id)
+ flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
+
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL,
- max17042_thread_handler,
- IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT,
+ max17042_thread_handler, flags,
chip->battery->desc->name,
chip);
if (!ret) {
@@ -1053,10 +1071,13 @@ static int max17042_probe(struct i2c_client *client,
max17042_set_soc_threshold(chip, 1);
} else {
client->irq = 0;
- dev_err(&client->dev, "%s(): cannot get IRQ\n",
- __func__);
+ if (ret != -EBUSY)
+ dev_err(&client->dev, "Failed to get IRQ\n");
}
}
+ /* Not able to update the charge threshold when exceeded? -> disable */
+ if (!client->irq)
+ regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
regmap_read(chip->regmap, MAX17042_STATUS, &val);
if (val & STATUS_POR_BIT) {
@@ -1104,6 +1125,14 @@ static int max17042_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
max17042_resume);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max17042_acpi_match[] = {
+ { "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
+#endif
+
#ifdef CONFIG_OF
static const struct of_device_id max17042_dt_match[] = {
{ .compatible = "maxim,max17042" },
@@ -1125,6 +1154,7 @@ MODULE_DEVICE_TABLE(i2c, max17042_id);
static struct i2c_driver max17042_i2c_driver = {
.driver = {
.name = "max17042",
+ .acpi_match_table = ACPI_PTR(max17042_acpi_match),
.of_match_table = of_match_ptr(max17042_dt_match),
.pm = &max17042_pm_ops,
},
diff --git a/drivers/power/supply/max1721x_battery.c b/drivers/power/supply/max1721x_battery.c
new file mode 100644
index 000000000000..9ee601a03d9b
--- /dev/null
+++ b/drivers/power/supply/max1721x_battery.c
@@ -0,0 +1,448 @@
+/*
+ * 1-Wire implementation for Maxim Semiconductor
+ * MAX7211/MAX17215 stanalone fuel gauge chip
+ *
+ * Copyright (C) 2017 Radioavionica Corporation
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/w1.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+#define W1_MAX1721X_FAMILY_ID 0x26
+#define DEF_DEV_NAME_MAX17211 "MAX17211"
+#define DEF_DEV_NAME_MAX17215 "MAX17215"
+#define DEF_DEV_NAME_UNKNOWN "UNKNOWN"
+#define DEF_MFG_NAME "MAXIM"
+
+#define PSY_MAX_NAME_LEN 32
+
+/* Number of valid register addresses in W1 mode */
+#define MAX1721X_MAX_REG_NR 0x1EF
+
+/* Factory settings (nonvilatile registers) (W1 specific) */
+#define MAX1721X_REG_NRSENSE 0x1CF /* RSense in 10^-5 Ohm */
+/* Strings */
+#define MAX1721X_REG_MFG_STR 0x1CC
+#define MAX1721X_REG_MFG_NUMB 3
+#define MAX1721X_REG_DEV_STR 0x1DB
+#define MAX1721X_REG_DEV_NUMB 5
+/* HEX Strings */
+#define MAX1721X_REG_SER_HEX 0x1D8
+
+/* MAX172XX Output Registers for W1 chips */
+#define MAX172XX_REG_STATUS 0x000 /* status reg */
+#define MAX172XX_BAT_PRESENT (1<<4) /* battery connected bit */
+#define MAX172XX_REG_DEVNAME 0x021 /* chip config */
+#define MAX172XX_DEV_MASK 0x000F /* chip type mask */
+#define MAX172X1_DEV 0x0001
+#define MAX172X5_DEV 0x0005
+#define MAX172XX_REG_TEMP 0x008 /* Temperature */
+#define MAX172XX_REG_BATT 0x0DA /* Battery voltage */
+#define MAX172XX_REG_CURRENT 0x00A /* Actual current */
+#define MAX172XX_REG_AVGCURRENT 0x00B /* Average current */
+#define MAX172XX_REG_REPSOC 0x006 /* Percentage of charge */
+#define MAX172XX_REG_DESIGNCAP 0x018 /* Design capacity */
+#define MAX172XX_REG_REPCAP 0x005 /* Average capacity */
+#define MAX172XX_REG_TTE 0x011 /* Time to empty */
+#define MAX172XX_REG_TTF 0x020 /* Time to full */
+
+struct max17211_device_info {
+ char name[PSY_MAX_NAME_LEN];
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct device *w1_dev;
+ struct regmap *regmap;
+ /* battery design format */
+ unsigned int rsense; /* in tenths uOhm */
+ char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
+ char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
+ char SerialNumber[13]; /* see get_sn_str() later for comment */
+};
+
+/* Convert regs value to power_supply units */
+
+static inline int max172xx_time_to_ps(unsigned int reg)
+{
+ return reg * 5625 / 1000; /* in sec. */
+}
+
+static inline int max172xx_percent_to_ps(unsigned int reg)
+{
+ return reg / 256; /* in percent from 0 to 100 */
+}
+
+static inline int max172xx_voltage_to_ps(unsigned int reg)
+{
+ return reg * 1250; /* in uV */
+}
+
+static inline int max172xx_capacity_to_ps(unsigned int reg)
+{
+ return reg * 500; /* in uAh */
+}
+
+/*
+ * Current and temperature is signed values, so unsigned regs
+ * value must be converted to signed type
+ */
+
+static inline int max172xx_temperature_to_ps(unsigned int reg)
+{
+ int val = (int16_t)(reg);
+
+ return val * 10 / 256; /* in tenths of deg. C */
+}
+
+/*
+ * Calculating current registers resolution:
+ *
+ * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * in 10^-11 Volts for get current in uA.
+ * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
+ * So: 102400 / 65535 * 10^5 = 156252
+ */
+static inline int max172xx_current_to_voltage(unsigned int reg)
+{
+ int val = (int16_t)(reg);
+
+ return val * 156252;
+}
+
+
+static inline struct max17211_device_info *
+to_device_info(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static int max1721x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17211_device_info *info = to_device_info(psy);
+ unsigned int reg = 0;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /*
+ * POWER_SUPPLY_PROP_PRESENT will always readable via
+ * sysfs interface. Value return 0 if battery not
+ * present or unaccesable via W1.
+ */
+ val->intval =
+ regmap_read(info->regmap, MAX172XX_REG_STATUS,
+ &reg) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, &reg);
+ val->intval = max172xx_percent_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_BATT, &reg);
+ val->intval = max172xx_voltage_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, &reg);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, &reg);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTE, &reg);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTF, &reg);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, &reg);
+ val->intval = max172xx_temperature_to_ps(reg);
+ break;
+ /* We need signed current, so must cast info->rsense to signed type */
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, &reg);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, &reg);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ /*
+ * Strings already received and inited by probe.
+ * We do dummy read for check battery still available.
+ */
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, &reg);
+ val->strval = info->DeviceName;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, &reg);
+ val->strval = info->ManufacturerName;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &reg);
+ val->strval = info->SerialNumber;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property max1721x_battery_props[] = {
+ /* int */
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ /* strings */
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int get_string(struct max17211_device_info *info,
+ uint16_t reg, uint8_t nr, char *str)
+{
+ unsigned int val;
+
+ if (!str || !(reg == MAX1721X_REG_MFG_STR ||
+ reg == MAX1721X_REG_DEV_STR))
+ return -EFAULT;
+
+ while (nr--) {
+ if (regmap_read(info->regmap, reg++, &val))
+ return -EFAULT;
+ *str++ = val>>8 & 0x00FF;
+ *str++ = val & 0x00FF;
+ }
+ return 0;
+}
+
+/* Maxim say: Serial number is a hex string up to 12 hex characters */
+static int get_sn_string(struct max17211_device_info *info, char *str)
+{
+ unsigned int val[3];
+
+ if (!str)
+ return -EFAULT;
+
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
+ return -EFAULT;
+
+ snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
+ return 0;
+}
+
+/*
+ * MAX1721x registers description for w1-regmap
+ */
+static const struct regmap_range max1721x_allow_range[] = {
+ regmap_reg_range(0, 0xDF), /* volatile data */
+ regmap_reg_range(0x180, 0x1DF), /* non-volatile memory */
+ regmap_reg_range(0x1E0, 0x1EF), /* non-volatile history (unused) */
+};
+
+static const struct regmap_range max1721x_deny_range[] = {
+ /* volatile data unused registers */
+ regmap_reg_range(0x24, 0x26),
+ regmap_reg_range(0x30, 0x31),
+ regmap_reg_range(0x33, 0x34),
+ regmap_reg_range(0x37, 0x37),
+ regmap_reg_range(0x3B, 0x3C),
+ regmap_reg_range(0x40, 0x41),
+ regmap_reg_range(0x43, 0x44),
+ regmap_reg_range(0x47, 0x49),
+ regmap_reg_range(0x4B, 0x4C),
+ regmap_reg_range(0x4E, 0xAF),
+ regmap_reg_range(0xB1, 0xB3),
+ regmap_reg_range(0xB5, 0xB7),
+ regmap_reg_range(0xBF, 0xD0),
+ regmap_reg_range(0xDB, 0xDB),
+ /* hole between volatile and non-volatile registers */
+ regmap_reg_range(0xE0, 0x17F),
+};
+
+static const struct regmap_access_table max1721x_regs = {
+ .yes_ranges = max1721x_allow_range,
+ .n_yes_ranges = ARRAY_SIZE(max1721x_allow_range),
+ .no_ranges = max1721x_deny_range,
+ .n_no_ranges = ARRAY_SIZE(max1721x_deny_range),
+};
+
+/*
+ * Model Gauge M5 Algorithm output register
+ * Volatile data (must not be cached)
+ */
+static const struct regmap_range max1721x_volatile_allow[] = {
+ regmap_reg_range(0, 0xDF),
+};
+
+static const struct regmap_access_table max1721x_volatile_regs = {
+ .yes_ranges = max1721x_volatile_allow,
+ .n_yes_ranges = ARRAY_SIZE(max1721x_volatile_allow),
+};
+
+/*
+ * W1-regmap config
+ */
+static const struct regmap_config max1721x_regmap_w1_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .rd_table = &max1721x_regs,
+ .volatile_table = &max1721x_volatile_regs,
+ .max_register = MAX1721X_MAX_REG_NR,
+};
+
+static int devm_w1_max1721x_add_device(struct w1_slave *sl)
+{
+ struct power_supply_config psy_cfg = {};
+ struct max17211_device_info *info;
+
+ info = devm_kzalloc(&sl->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ sl->family_data = (void *)info;
+ info->w1_dev = &sl->dev;
+
+ /*
+ * power_supply class battery name translated from W1 slave device
+ * unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+ * so, 26 (device family) correcpondent to max1721x devices.
+ * Device name still unical for any numbers connected devices.
+ */
+ snprintf(info->name, sizeof(info->name),
+ "max1721x-%012X", (unsigned int)sl->reg_num.id);
+ info->bat_desc.name = info->name;
+
+ /*
+ * FixMe: battery device name exceed max len for thermal_zone device
+ * name and translation to thermal_zone must be disabled.
+ */
+ info->bat_desc.no_thermal = true;
+ info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ info->bat_desc.properties = max1721x_battery_props;
+ info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
+ info->bat_desc.get_property = max1721x_battery_get_property;
+ psy_cfg.drv_data = info;
+
+ /* regmap init */
+ info->regmap = devm_regmap_init_w1(info->w1_dev,
+ &max1721x_regmap_w1_config);
+ if (IS_ERR(info->regmap)) {
+ int err = PTR_ERR(info->regmap);
+
+ dev_err(info->w1_dev, "Failed to allocate register map: %d\n",
+ err);
+ return err;
+ }
+
+ /* rsense init */
+ info->rsense = 0;
+ if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense)) {
+ dev_err(info->w1_dev, "Can't read RSense. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ if (!info->rsense) {
+ dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
+ info->rsense = 1000; /* in regs in 10^-5 */
+ }
+ dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
+
+ if (get_string(info, MAX1721X_REG_MFG_STR,
+ MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
+ dev_err(info->w1_dev, "Can't read manufacturer. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ if (!info->ManufacturerName[0])
+ strncpy(info->ManufacturerName, DEF_MFG_NAME,
+ 2 * MAX1721X_REG_MFG_NUMB);
+
+ if (get_string(info, MAX1721X_REG_DEV_STR,
+ MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
+ dev_err(info->w1_dev, "Can't read device. Hardware error.\n");
+ return -ENODEV;
+ }
+ if (!info->DeviceName[0]) {
+ unsigned int dev_name;
+
+ if (regmap_read(info->regmap,
+ MAX172XX_REG_DEVNAME, &dev_name)) {
+ dev_err(info->w1_dev, "Can't read device name reg.\n");
+ return -ENODEV;
+ }
+
+ switch (dev_name & MAX172XX_DEV_MASK) {
+ case MAX172X1_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ case MAX172X5_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ default:
+ strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ }
+ }
+
+ if (get_sn_string(info, info->SerialNumber)) {
+ dev_err(info->w1_dev, "Can't read serial. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ info->bat = devm_power_supply_register(&sl->dev, &info->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(info->bat)) {
+ dev_err(info->w1_dev, "failed to register battery\n");
+ return PTR_ERR(info->bat);
+ }
+
+ return 0;
+}
+
+static struct w1_family_ops w1_max1721x_fops = {
+ .add_slave = devm_w1_max1721x_add_device,
+};
+
+static struct w1_family w1_max1721x_family = {
+ .fid = W1_MAX1721X_FAMILY_ID,
+ .fops = &w1_max1721x_fops,
+};
+
+module_w1_family(w1_max1721x_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
+MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
+MODULE_ALIAS("w1-family-" __stringify(W1_MAX1721X_FAMILY_ID));
diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
index 9e29b1321648..3bc2eea7b3b7 100644
--- a/drivers/power/supply/olpc_battery.c
+++ b/drivers/power/supply/olpc_battery.c
@@ -535,7 +535,7 @@ static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
return count;
}
-static struct bin_attribute olpc_bat_eeprom = {
+static const struct bin_attribute olpc_bat_eeprom = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
@@ -559,7 +559,7 @@ static ssize_t olpc_bat_error_read(struct device *dev,
return sprintf(buf, "%d\n", ec_byte);
}
-static struct device_attribute olpc_bat_error = {
+static const struct device_attribute olpc_bat_error = {
.attr = {
.name = "error",
.mode = S_IRUGO,
diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
index b3c1873ad84d..1ad7ccce6075 100644
--- a/drivers/power/supply/pcf50633-charger.c
+++ b/drivers/power/supply/pcf50633-charger.c
@@ -254,7 +254,7 @@ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
NULL,
};
-static struct attribute_group mbc_attr_group = {
+static const struct attribute_group mbc_attr_group = {
.name = NULL, /* put in device directory */
.attrs = pcf50633_mbc_sysfs_entries,
};
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index 540d3e0aa011..02c6340ae36f 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -259,18 +259,14 @@ static int power_supply_check_supplies(struct power_supply *psy)
/* All supplies found, allocate char ** array for filling */
psy->supplied_from = devm_kzalloc(&psy->dev, sizeof(psy->supplied_from),
GFP_KERNEL);
- if (!psy->supplied_from) {
- dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+ if (!psy->supplied_from)
return -ENOMEM;
- }
*psy->supplied_from = devm_kzalloc(&psy->dev,
sizeof(char *) * (cnt - 1),
GFP_KERNEL);
- if (!*psy->supplied_from) {
- dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+ if (!*psy->supplied_from)
return -ENOMEM;
- }
return power_supply_populate_supplied_from(psy);
}
@@ -314,11 +310,12 @@ static int __power_supply_am_i_supplied(struct device *dev, void *_data)
struct power_supply *epsy = dev_get_drvdata(dev);
struct psy_am_i_supplied_data *data = _data;
- data->count++;
- if (__power_supply_is_supplied_by(epsy, data->psy))
+ if (__power_supply_is_supplied_by(epsy, data->psy)) {
+ data->count++;
if (!epsy->desc->get_property(epsy, POWER_SUPPLY_PROP_ONLINE,
&ret))
return ret.intval;
+ }
return 0;
}
@@ -374,6 +371,47 @@ int power_supply_is_system_supplied(void)
}
EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
+static int __power_supply_get_supplier_max_current(struct device *dev,
+ void *data)
+{
+ union power_supply_propval ret = {0,};
+ struct power_supply *epsy = dev_get_drvdata(dev);
+ struct power_supply *psy = data;
+
+ if (__power_supply_is_supplied_by(epsy, psy))
+ if (!epsy->desc->get_property(epsy,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ &ret))
+ return ret.intval;
+
+ return 0;
+}
+
+int power_supply_set_input_current_limit_from_supplier(struct power_supply *psy)
+{
+ union power_supply_propval val = {0,};
+ int curr;
+
+ if (!psy->desc->set_property)
+ return -EINVAL;
+
+ /*
+ * This function is not intended for use with a supply with multiple
+ * suppliers, we simply pick the first supply to report a non 0
+ * max-current.
+ */
+ curr = class_for_each_device(power_supply_class, NULL, psy,
+ __power_supply_get_supplier_max_current);
+ if (curr <= 0)
+ return (curr == 0) ? -ENODEV : curr;
+
+ val.intval = curr;
+
+ return psy->desc->set_property(psy,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+}
+EXPORT_SYMBOL_GPL(power_supply_set_input_current_limit_from_supplier);
+
int power_supply_set_battery_charged(struct power_supply *psy)
{
if (atomic_read(&psy->use_cnt) >= 0 &&
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index f7059459f0fb..b19a73176910 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -12,25 +12,21 @@
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/power_supply.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
-#include <linux/slab.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
-#include <linux/stat.h>
-
#include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
enum {
REG_MANUFACTURER_DATA,
@@ -60,8 +56,8 @@ enum {
#define BATTERY_MODE_OFFSET 0x03
#define BATTERY_MODE_MASK 0x8000
enum sbs_battery_mode {
- BATTERY_MODE_AMPS,
- BATTERY_MODE_WATTS
+ BATTERY_MODE_AMPS = 0,
+ BATTERY_MODE_WATTS = 0x8000
};
/* manufacturer access defines */
@@ -532,6 +528,8 @@ static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
if (ret < 0)
return ret;
+ usleep_range(1000, 2000);
+
return original_val & BATTERY_MODE_MASK;
}
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index bb4d7ed2ce55..3c945f9f5f0f 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -148,10 +148,4 @@ config W1_SLAVE_DS28E04
If you are unsure, say N.
-config W1_SLAVE_BQ27000
- tristate "BQ27000 slave support"
- help
- Say Y here if you want to use a hdq
- bq27000 slave support.
-
endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 4622d8fed362..36b22fb2d3a1 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
-obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
deleted file mode 100644
index 8046ac45381a..000000000000
--- a/drivers/w1/slaves/w1_bq27000.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * drivers/w1/slaves/w1_bq27000.c
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/power/bq27xxx_battery.h>
-
-#include <linux/w1.h>
-
-#define W1_FAMILY_BQ27000 0x01
-
-#define HDQ_CMD_READ (0)
-#define HDQ_CMD_WRITE (1<<7)
-
-static int F_ID;
-module_param(F_ID, int, S_IRUSR);
-MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
-
-static int w1_bq27000_read(struct device *dev, unsigned int reg)
-{
- u8 val;
- struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
-
- mutex_lock(&sl->master->bus_mutex);
- w1_write_8(sl->master, HDQ_CMD_READ | reg);
- val = w1_read_8(sl->master);
- mutex_unlock(&sl->master->bus_mutex);
-
- return val;
-}
-
-static struct bq27xxx_platform_data bq27000_battery_info = {
- .read = w1_bq27000_read,
- .name = "bq27000-battery",
- .chip = BQ27000,
-};
-
-static int w1_bq27000_add_slave(struct w1_slave *sl)
-{
- int ret;
- struct platform_device *pdev;
-
- pdev = platform_device_alloc("bq27000-battery", -1);
- if (!pdev) {
- ret = -ENOMEM;
- return ret;
- }
- ret = platform_device_add_data(pdev,
- &bq27000_battery_info,
- sizeof(bq27000_battery_info));
- if (ret)
- goto pdev_add_failed;
- pdev->dev.parent = &sl->dev;
-
- ret = platform_device_add(pdev);
- if (ret)
- goto pdev_add_failed;
-
- dev_set_drvdata(&sl->dev, pdev);
-
- goto success;
-
-pdev_add_failed:
- platform_device_put(pdev);
-success:
- return ret;
-}
-
-static void w1_bq27000_remove_slave(struct w1_slave *sl)
-{
- struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
- platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_bq27000_fops = {
- .add_slave = w1_bq27000_add_slave,
- .remove_slave = w1_bq27000_remove_slave,
-};
-
-static struct w1_family w1_bq27000_family = {
- .fid = W1_FAMILY_BQ27000,
- .fops = &w1_bq27000_fops,
-};
-
-static int __init w1_bq27000_init(void)
-{
- if (F_ID)
- w1_bq27000_family.fid = F_ID;
-
- return w1_register_family(&w1_bq27000_family);
-}
-
-static void __exit w1_bq27000_exit(void)
-{
- w1_unregister_family(&w1_bq27000_family);
-}
-
-module_init(w1_bq27000_init);
-module_exit(w1_bq27000_exit);
-
-MODULE_AUTHOR("Texas Instruments Ltd");
-MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));
diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h
new file mode 100644
index 000000000000..45ce7f116a91
--- /dev/null
+++ b/include/linux/power/bq24190_charger.h
@@ -0,0 +1,18 @@
+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+#include <linux/regulator/machine.h>
+
+struct bq24190_platform_data {
+ const struct regulator_init_data *regulator_init_data;
+};
+
+#endif
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 11e11685dd1d..43194e02c1ee 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -6,6 +6,7 @@ enum bq27xxx_chip {
BQ27010, /* bq27010, bq27210 */
BQ2750X, /* bq27500 deprecated alias */
BQ2751X, /* bq27510, bq27520 deprecated alias */
+ BQ2752X,
BQ27500, /* bq27500/1 */
BQ27510G1, /* bq27510G1 */
BQ27510G2, /* bq27510G2 */
@@ -15,26 +16,16 @@ enum bq27xxx_chip {
BQ27520G3, /* bq27520G3 */
BQ27520G4, /* bq27520G4 */
BQ27530, /* bq27530, bq27531 */
+ BQ27531,
BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
+ BQ27542,
+ BQ27546,
+ BQ27742,
BQ27545, /* bq27545 */
BQ27421, /* bq27421, bq27425, bq27441, bq27621 */
-};
-
-/**
- * struct bq27xxx_plaform_data - Platform data for bq27xxx devices
- * @name: Name of the battery.
- * @chip: Chip class number of this device.
- * @read: HDQ read callback.
- * This function should provide access to the HDQ bus the battery is
- * connected to.
- * The first parameter is a pointer to the battery device, the second the
- * register to be read. The return value should either be the content of
- * the passed register or an error value.
- */
-struct bq27xxx_platform_data {
- const char *name;
- enum bq27xxx_chip chip;
- int (*read)(struct device *dev, unsigned int);
+ BQ27425,
+ BQ27441,
+ BQ27621,
};
struct bq27xxx_device_info;
@@ -63,7 +54,7 @@ struct bq27xxx_device_info {
struct device *dev;
int id;
enum bq27xxx_chip chip;
- bool ram_chip;
+ u32 opts;
const char *name;
struct bq27xxx_dm_reg *dm_regs;
u32 unseal_key;
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index de89066b72b1..79e90b3d3288 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -332,6 +332,8 @@ extern int power_supply_get_battery_info(struct power_supply *psy,
struct power_supply_battery_info *info);
extern void power_supply_changed(struct power_supply *psy);
extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_input_current_limit_from_supplier(
+ struct power_supply *psy);
extern int power_supply_set_battery_charged(struct power_supply *psy);
#ifdef CONFIG_POWER_SUPPLY