summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h36
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h53
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h13
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c126
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.h268
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c4
6 files changed, 270 insertions, 230 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index b425544144ec..fc3a4fe1ac71 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -749,38 +749,6 @@
/* BME1000 PHY Specific Control Register */
#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_100_ENABLE 0x2000
-#define I82579_LPI_CTRL_1000_ENABLE 0x4000
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
-#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
-
-/* Extended Management Interface (EMI) Registers */
-#define I82579_EMI_ADDR 0x10
-#define I82579_EMI_DATA 0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
-#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
-#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
-#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
-#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
-#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
-#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
-#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
-#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
-#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */
-#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
-#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */
-#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
-#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
-
-#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */
-#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
-
/* Bits...
* 15-5: page
* 4-0: register offset
@@ -827,8 +795,4 @@
/* SerDes Control */
#define E1000_GEN_POLL_TIMEOUT 640
-/* FW Semaphore */
-#define E1000_FWSM_WLOCK_MAC_MASK 0x0380
-#define E1000_FWSM_WLOCK_MAC_SHIFT 7
-
#endif /* _E1000_DEFINES_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 12c5d4043505..7a383cd715d6 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -104,44 +104,6 @@ struct e1000_info;
(((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
(((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
-/* PHY Wakeup Registers and defines */
-#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
-#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
-#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
-#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
-#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
-#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
-
-#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
-#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
-#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
-#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
-#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
-#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
-#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
-
-#define HV_STATS_PAGE 778
-#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
-#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
-#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
-#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
-#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
-#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
-#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
-#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
-#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
-#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
-#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
-#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
-#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
-#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
-
-#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
-
/* BM PHY Copper Specific Status */
#define BM_CS_STATUS 17
#define BM_CS_STATUS_LINK_UP 0x0400
@@ -156,9 +118,6 @@ struct e1000_info;
#define HV_M_STATUS_SPEED_1000 0x0200
#define HV_M_STATUS_LINK_UP 0x0040
-#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
-#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
-
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
@@ -579,17 +538,6 @@ extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
-extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
-extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state);
-extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
-extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
-extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
-extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
-extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
-
extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
@@ -700,7 +648,6 @@ extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
-extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
extern void e1000e_ptp_init(struct e1000_adapter *adapter);
extern void e1000e_ptp_remove(struct e1000_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 8a145f468721..21a9cc36e467 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -200,10 +200,6 @@ enum e1e_registers {
#define E1000_RA (E1000_RAL(0))
E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8))
- E1000_SHRAL_PCH_LPT_BASE = 0x05408,
-#define E1000_SHRAL_PCH_LPT(_n) (E1000_SHRAL_PCH_LPT_BASE + ((_n) * 8))
- E1000_SHRAH_PCH_LTP_BASE = 0x0540C,
-#define E1000_SHRAH_PCH_LPT(_n) (E1000_SHRAH_PCH_LTP_BASE + ((_n) * 8))
E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */
#define E1000_SHRAL(_n) (E1000_SHRAL_BASE + ((_n) * 8))
E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */
@@ -215,6 +211,7 @@ enum e1e_registers {
E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */
E1000_MANC = 0x05820, /* Management Control - RW */
E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */
+ E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
E1000_HOST_IF = 0x08800, /* Host Interface */
E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */
@@ -233,9 +230,6 @@ enum e1e_registers {
E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */
#define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4))
E1000_FFLT_DBG = 0x05F04, /* Debug Register */
- E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
-#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
-#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
E1000_HICR = 0x08F00, /* Host Interface Control */
E1000_SYSTIML = 0x0B600, /* System time register Low - RO */
E1000_SYSTIMH = 0x0B604, /* System time register High - RO */
@@ -272,10 +266,6 @@ enum e1e_registers {
#define BM_WUC_HOST_WU_BIT (1 << 4)
#define BM_WUC_ME_WU_BIT (1 << 5)
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
@@ -1004,5 +994,6 @@ struct e1000_hw {
#include "82571.h"
#include "80003es2lan.h"
+#include "ich8lan.h"
#endif
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index a019b46f30e2..1e838b235e8a 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -57,132 +57,6 @@
#include "e1000.h"
-#define ICH_FLASH_GFPREG 0x0000
-#define ICH_FLASH_HSFSTS 0x0004
-#define ICH_FLASH_HSFCTL 0x0006
-#define ICH_FLASH_FADDR 0x0008
-#define ICH_FLASH_FDATA0 0x0010
-#define ICH_FLASH_PR0 0x0074
-
-#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
-#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
-#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000
-#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
-#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
-
-#define ICH_CYCLE_READ 0
-#define ICH_CYCLE_WRITE 2
-#define ICH_CYCLE_ERASE 3
-
-#define FLASH_GFPREG_BASE_MASK 0x1FFF
-#define FLASH_SECTOR_ADDR_SHIFT 12
-
-#define ICH_FLASH_SEG_SIZE_256 256
-#define ICH_FLASH_SEG_SIZE_4K 4096
-#define ICH_FLASH_SEG_SIZE_8K 8192
-#define ICH_FLASH_SEG_SIZE_64K 65536
-
-
-#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
-/* FW established a valid mode */
-#define E1000_ICH_FWSM_FW_VALID 0x00008000
-
-#define E1000_ICH_MNG_IAMT_MODE 0x2
-
-#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_DEF1_OFF2 << 8) | \
- (ID_LED_DEF1_ON2 << 4) | \
- (ID_LED_DEF1_DEF2))
-
-#define E1000_ICH_NVM_SIG_WORD 0x13
-#define E1000_ICH_NVM_SIG_MASK 0xC000
-#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
-#define E1000_ICH_NVM_SIG_VALUE 0x80
-
-#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
-
-#define E1000_FEXTNVM_SW_CONFIG 1
-#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
-
-#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000
-#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000
-
-#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
-
-#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
-
-#define E1000_ICH_RAR_ENTRIES 7
-#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */
-#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
-#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
-#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
-
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
-#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
-#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
-
-#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
-
-#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
-
-/* SMBus Control Phy Register */
-#define CV_SMB_CTRL PHY_REG(769, 23)
-#define CV_SMB_CTRL_FORCE_SMBUS 0x0001
-
-/* SMBus Address Phy Register */
-#define HV_SMB_ADDR PHY_REG(768, 26)
-#define HV_SMB_ADDR_MASK 0x007F
-#define HV_SMB_ADDR_PEC_EN 0x0200
-#define HV_SMB_ADDR_VALID 0x0080
-#define HV_SMB_ADDR_FREQ_MASK 0x1100
-#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8
-#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12
-
-/* PHY Power Management Control */
-#define HV_PM_CTRL PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
-
-/* Intel Rapid Start Technology Support */
-#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70)
-#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080
-#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28)
-#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000
-#define I217_CGFREG PHY_REG(772, 29)
-#define I217_CGFREG_ENABLE_MTA_RESET 0x0002
-#define I217_MEMPWR PHY_REG(772, 26)
-#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010
-
-/* Strapping Option Register - RO */
-#define E1000_STRAP 0x0000C
-#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
-#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
-#define E1000_STRAP_SMT_FREQ_MASK 0x00003000
-#define E1000_STRAP_SMT_FREQ_SHIFT 12
-
-/* OEM Bits Phy Register */
-#define HV_OEM_BITS PHY_REG(768, 25)
-#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
-#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
-#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
-
-#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
-#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
-
-/* KMRN Mode Control */
-#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
-#define HV_KMRN_MDIO_SLOW 0x0400
-
-/* KMRN FIFO Control and Status */
-#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
-#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
-#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
-
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
new file mode 100644
index 000000000000..b6d3174d7d2d
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -0,0 +1,268 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2013 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000E_ICH8LAN_H_
+#define _E1000E_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_PR0 0x0074
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
+
+#define ICH_CYCLE_READ 0
+#define ICH_CYCLE_WRITE 2
+#define ICH_CYCLE_ERASE 3
+
+#define FLASH_GFPREG_BASE_MASK 0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT 12
+
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_8K 8192
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID 0x00008000
+#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
+
+#define E1000_ICH_MNG_IAMT_MODE 0x2
+
+#define E1000_FWSM_WLOCK_MAC_MASK 0x0380
+#define E1000_FWSM_WLOCK_MAC_SHIFT 7
+
+/* Shared Receive Address Registers */
+#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8))
+#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8))
+
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_OFF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
+#define E1000_ICH_NVM_SIG_VALUE 0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
+
+#define E1000_FEXTNVM_SW_CONFIG 1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* different on ICH8M */
+
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+
+#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES 7
+#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+ ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
+#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
+#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
+#define HV_STATS_PAGE 778
+/* Half-duplex collision counts */
+#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision */
+#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. */
+#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Collision */
+#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision */
+#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
+#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Tx with no CRS */
+#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
+
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS 0x0001
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK 0x007F
+#define HV_SMB_ADDR_PEC_EN 0x0200
+#define HV_SMB_ADDR_VALID 0x0080
+#define HV_SMB_ADDR_FREQ_MASK 0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP 0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+#define E1000_STRAP_SMT_FREQ_MASK 0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT 12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL PHY_REG(770, 17)
+#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
+
+#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE 0x2000
+#define I82579_LPI_CTRL_1000_ENABLE 0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR 0x10
+#define I82579_EMI_DATA 0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
+#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE */
+#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE */
+#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
+
+#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080
+#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000
+#define I217_CGFREG PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET 0x0002
+#define I217_MEMPWR PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010
+
+/* Receive Address Initial CRC Calculation */
+#define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4))
+
+/* Latency Tolerance Reporting */
+#define E1000_LTRV 0x000F8
+#define E1000_LTRV_SCALE_MAX 5
+#define E1000_LTRV_SCALE_FACTOR 5
+#define E1000_LTRV_REQ_SHIFT 15
+#define E1000_LTRV_NOSNOOP_SHIFT 16
+#define E1000_LTRV_SEND (1 << 30)
+
+/* Proprietary Latency Tolerance Reporting PCI Capability */
+#define E1000_PCI_LTR_CAP_LPT 0xA8
+
+/* OBFF Control & Threshold Defines */
+#define E1000_SVCR_OFF_EN 0x00000001
+#define E1000_SVCR_OFF_MASKINT 0x00001000
+#define E1000_SVCR_OFF_TIMER_MASK 0xFFFF0000
+#define E1000_SVCR_OFF_TIMER_SHIFT 16
+#define E1000_SVT_OFF_HWM_MASK 0x0000001F
+
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state);
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+#endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index ae656f16c9fd..851685dd00d4 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -91,10 +91,6 @@ static const u16 e1000_igp_2_cable_length_table[] = {
/* BM PHY Copper Specific Control 1 */
#define BM_CS_CTRL1 16
-#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
-#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
-#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
-
/**
* e1000e_check_reset_block_generic - Check if PHY reset is blocked
* @hw: pointer to the HW structure
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-24 05:34:56 +0000