summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/Makefile2
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mt65xx.txt9
-rw-r--r--Documentation/spi/00-INDEX4
-rw-r--r--Documentation/spi/Makefile8
-rw-r--r--arch/arm/plat-samsung/devs.c19
-rw-r--r--drivers/spi/Kconfig11
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-bcm63xx.c7
-rw-r--r--drivers/spi/spi-butterfly.c30
-rw-r--r--drivers/spi/spi-cadence.c6
-rw-r--r--drivers/spi/spi-davinci.c17
-rw-r--r--drivers/spi/spi-dw-mid.c2
-rw-r--r--drivers/spi/spi-dw.c2
-rw-r--r--drivers/spi/spi-dw.h2
-rw-r--r--drivers/spi/spi-fsl-espi.c6
-rw-r--r--drivers/spi/spi-imx.c101
-rw-r--r--drivers/spi/spi-lm70llp.c43
-rw-r--r--drivers/spi/spi-loopback-test.c1005
-rw-r--r--drivers/spi/spi-mt65xx.c64
-rw-r--r--drivers/spi/spi-omap2-mcspi.c31
-rw-r--r--drivers/spi/spi-pxa2xx.c3
-rw-r--r--drivers/spi/spi-s3c64xx.c33
-rw-r--r--drivers/spi/spi-sun4i.c14
-rw-r--r--drivers/spi/spi-sun6i.c8
-rw-r--r--drivers/spi/spi-test.h136
-rw-r--r--drivers/spi/spi-zynqmp-gqspi.c8
-rw-r--r--drivers/spi/spi.c32
-rw-r--r--drivers/spi/spidev.c2
-rw-r--r--include/linux/platform_data/spi-s3c64xx.h2
-rw-r--r--include/linux/spi/spi.h29
-rw-r--r--tools/Makefile7
-rw-r--r--tools/spi/.gitignore (renamed from Documentation/spi/.gitignore)0
-rw-r--r--tools/spi/Makefile4
-rw-r--r--tools/spi/spidev_fdx.c (renamed from Documentation/spi/spidev_fdx.c)0
-rw-r--r--tools/spi/spidev_test.c (renamed from Documentation/spi/spidev_test.c)119
36 files changed, 1536 insertions, 232 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile
index bc0548201755..1207d7907650 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,4 +1,4 @@
subdir-y := accounting auxdisplay blackfin connector \
filesystems filesystems ia64 laptops mic misc-devices \
- networking pcmcia prctl ptp spi timers vDSO video4linux \
+ networking pcmcia prctl ptp timers vDSO video4linux \
watchdog
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 705075da2f10..aa005c1d10d9 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -10,6 +10,7 @@ Required properties:
"renesas,msiof-r8a7792" (R-Car V2H)
"renesas,msiof-r8a7793" (R-Car M2-N)
"renesas,msiof-r8a7794" (R-Car E2)
+ "renesas,msiof-sh73a0" (SH-Mobile AG5)
- reg : A list of offsets and lengths of the register sets for
the device.
If only one register set is present, it is to be used
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index ce363c923f44..e43f4cf4cf35 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -2,9 +2,10 @@ Binding for MTK SPI controller
Required properties:
- compatible: should be one of the following.
- - mediatek,mt8173-spi: for mt8173 platforms
- - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt2701-spi: for mt2701 platforms
- mediatek,mt6589-spi: for mt6589 platforms
+ - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt8173-spi: for mt8173 platforms
- #address-cells: should be 1.
@@ -29,10 +30,10 @@ Required properties:
muxes clock, and "spi-clk" for the clock gate.
Optional properties:
--cs-gpios: see spi-bus.txt, only required for MT8173.
+-cs-gpios: see spi-bus.txt.
- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
- controller used. This is a array, the element value should be 0~3,
+ controller used. This is an array, the element value should be 0~3,
only required for MT8173.
0: specify GPIO69,70,71,72 for spi pins.
1: specify GPIO102,103,104,105 for spi pins.
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX
index a128fa835512..4644bf0d9832 100644
--- a/Documentation/spi/00-INDEX
+++ b/Documentation/spi/00-INDEX
@@ -10,13 +10,9 @@ pxa2xx
- PXA2xx SPI master controller build by spi_message fifo wq
spidev
- Intro to the userspace API for spi devices
-spidev_fdx.c
- - spidev example file
spi-lm70llp
- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
spi-sc18is602
- NXP SC18IS602/603 I2C-bus to SPI bridge
spi-summary
- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
-spidev_test.c
- - SPI testing utility.
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
deleted file mode 100644
index efa255813e9d..000000000000
--- a/Documentation/spi/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# List of programs to build
-hostprogs-y := spidev_test spidev_fdx
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74ef8891254e..42f6f9cd844c 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1100,9 +1100,7 @@ struct platform_device s3c_device_wdt = {
#ifdef CONFIG_S3C64XX_DEV_SPI0
static struct resource s3c64xx_spi0_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
- [2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
- [3] = DEFINE_RES_IRQ(IRQ_SPI0),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI0),
};
struct platform_device s3c64xx_device_spi0 = {
@@ -1130,6 +1128,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+ pd.dma_tx = (void *)DMACH_SPI0_TX;
+ pd.dma_rx = (void *)DMACH_SPI0_RX;
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
#elif defined(CONFIG_S3C64XX_PL080)
@@ -1145,9 +1145,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
#ifdef CONFIG_S3C64XX_DEV_SPI1
static struct resource s3c64xx_spi1_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
- [2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
- [3] = DEFINE_RES_IRQ(IRQ_SPI1),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI1),
};
struct platform_device s3c64xx_device_spi1 = {
@@ -1175,12 +1173,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
+ pd.dma_tx = (void *)DMACH_SPI1_TX;
+ pd.dma_rx = (void *)DMACH_SPI1_RX;
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
#elif defined(CONFIG_S3C64XX_PL080)
pd.filter = pl08x_filter_id;
#endif
+
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
}
#endif /* CONFIG_S3C64XX_DEV_SPI1 */
@@ -1188,9 +1189,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
#ifdef CONFIG_S3C64XX_DEV_SPI2
static struct resource s3c64xx_spi2_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
- [2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
- [3] = DEFINE_RES_IRQ(IRQ_SPI2),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI2),
};
struct platform_device s3c64xx_device_spi2 = {
@@ -1218,6 +1217,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
+ pd.dma_tx = (void *)DMACH_SPI2_TX;
+ pd.dma_rx = (void *)DMACH_SPI2_RX;
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
#elif defined(CONFIG_S3C64XX_PL080)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8b9c2a38d1cc..77064160dd76 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -585,7 +585,7 @@ config SPI_TEGRA20_SLINK
config SPI_TOPCLIFF_PCH
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
- depends on PCI && (X86_32 || COMPILE_TEST)
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
@@ -689,6 +689,15 @@ config SPI_SPIDEV
Note that this application programming interface is EXPERIMENTAL
and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
+config SPI_LOOPBACK_TEST
+ tristate "spi loopback test framework support"
+ depends on m
+ help
+ This enables the SPI loopback testing framework driver
+
+ primarily used for development of spi_master drivers
+ and to detect regressions
+
config SPI_TLE62X0
tristate "Infineon TLE62X0 (for power switching)"
depends on SYSFS
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 31fb7fb2a0b6..8991ffce6e12 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -8,6 +8,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
# config declarations into driver model code
obj-$(CONFIG_SPI_MASTER) += spi.o
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o
# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index bf9a610e5b89..fee747030ee6 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -207,6 +207,9 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
u8 clk_cfg, reg;
int i;
+ /* Default to lowest clock configuration */
+ clk_cfg = SPI_CLK_0_391MHZ;
+
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
@@ -215,10 +218,6 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
}
}
- /* No matching configuration found, default to lowest */
- if (i == SPI_CLK_MASK)
- clk_cfg = SPI_CLK_0_391MHZ;
-
/* clear existing clock configuration bits of the register */
reg = bcm_spi_readb(bs, SPI_CLK_CFG);
reg &= ~SPI_CLK_MASK;
diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c
index 9a95862986c8..22a31e4a1a11 100644
--- a/drivers/spi/spi-butterfly.c
+++ b/drivers/spi/spi-butterfly.c
@@ -27,7 +27,6 @@
#include <linux/mtd/partitions.h>
-
/*
* This uses SPI to talk with an "AVR Butterfly", which is a $US20 card
* with a battery powered AVR microcontroller and lots of goodies. You
@@ -37,7 +36,6 @@
* and use this custom parallel port cable.
*/
-
/* DATA output bits (pins 2..9 == D0..D7) */
#define butterfly_nreset (1 << 1) /* pin 3 */
@@ -52,14 +50,11 @@
/* CONTROL output bits */
#define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */
-
-
static inline struct butterfly *spidev_to_pp(struct spi_device *spi)
{
return spi->controller_data;
}
-
struct butterfly {
/* REVISIT ... for now, this must be first */
struct spi_bitbang bitbang;
@@ -140,7 +135,6 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0);
}
-
/* we only needed to implement one mode here, and choose SPI_MODE_0 */
#define spidelay(X) do { } while (0)
@@ -149,9 +143,8 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
#include "spi-bitbang-txrx.h"
static u32
-butterfly_txrx_word_mode0(struct spi_device *spi,
- unsigned nsecs,
- u32 word, u8 bits)
+butterfly_txrx_word_mode0(struct spi_device *spi, unsigned nsecs, u32 word,
+ u8 bits)
{
return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
}
@@ -186,7 +179,6 @@ static struct flash_platform_data flash = {
.nr_parts = ARRAY_SIZE(partitions),
};
-
/* REVISIT remove this ugly global and its "only one" limitation */
static struct butterfly *butterfly;
@@ -197,6 +189,7 @@ static void butterfly_attach(struct parport *p)
struct butterfly *pp;
struct spi_master *master;
struct device *dev = p->physport->dev;
+ struct pardev_cb butterfly_cb;
if (butterfly || !dev)
return;
@@ -229,9 +222,9 @@ static void butterfly_attach(struct parport *p)
* parport hookup
*/
pp->port = p;
- pd = parport_register_device(p, "spi_butterfly",
- NULL, NULL, NULL,
- 0 /* FLAGS */, pp);
+ memset(&butterfly_cb, 0, sizeof(butterfly_cb));
+ butterfly_cb.private = pp;
+ pd = parport_register_dev_model(p, "spi_butterfly", &butterfly_cb, 0);
if (!pd) {
status = -ENOMEM;
goto clean0;
@@ -262,7 +255,6 @@ static void butterfly_attach(struct parport *p)
parport_write_data(pp->port, pp->lastbyte);
msleep(100);
-
/*
* Start SPI ... for now, hide that we're two physical busses.
*/
@@ -283,7 +275,7 @@ static void butterfly_attach(struct parport *p)
pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]);
if (pp->dataflash)
pr_debug("%s: dataflash at %s\n", p->name,
- dev_name(&pp->dataflash->dev));
+ dev_name(&pp->dataflash->dev));
pr_info("%s: AVR Butterfly\n", p->name);
butterfly = pp;
@@ -297,7 +289,7 @@ clean2:
clean1:
parport_unregister_device(pd);
clean0:
- (void) spi_master_put(pp->bitbang.master);
+ spi_master_put(pp->bitbang.master);
done:
pr_debug("%s: butterfly probe, fail %d\n", p->name, status);
}
@@ -325,16 +317,16 @@ static void butterfly_detach(struct parport *p)
parport_release(pp->pd);
parport_unregister_device(pp->pd);
- (void) spi_master_put(pp->bitbang.master);
+ spi_master_put(pp->bitbang.master);
}
static struct parport_driver butterfly_driver = {
.name = "spi_butterfly",
- .attach = butterfly_attach,
+ .match_port = butterfly_attach,
.detach = butterfly_detach,
+ .devmodel = true,
};
-
static int __init butterfly_init(void)
{
return parport_register_driver(&butterfly_driver);
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 5a6749881ff9..121a4135b540 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -617,8 +617,7 @@ static int cdns_spi_remove(struct platform_device *pdev)
*/
static int __maybe_unused cdns_spi_suspend(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
struct cdns_spi *xspi = spi_master_get_devdata(master);
@@ -641,8 +640,7 @@ static int __maybe_unused cdns_spi_suspend(struct device *dev)
*/
static int __maybe_unused cdns_spi_resume(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
struct cdns_spi *xspi = spi_master_get_devdata(master);
int ret = 0;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 7d3af3eacf57..fddb7a3be322 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -477,33 +477,33 @@ static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
struct device *sdev = dspi->bitbang.master->dev.parent;
if (int_status & SPIFLG_TIMEOUT_MASK) {
- dev_dbg(sdev, "SPI Time-out Error\n");
+ dev_err(sdev, "SPI Time-out Error\n");
return -ETIMEDOUT;
}
if (int_status & SPIFLG_DESYNC_MASK) {
- dev_dbg(sdev, "SPI Desynchronization Error\n");
+ dev_err(sdev, "SPI Desynchronization Error\n");
return -EIO;
}
if (int_status & SPIFLG_BITERR_MASK) {
- dev_dbg(sdev, "SPI Bit error\n");
+ dev_err(sdev, "SPI Bit error\n");
return -EIO;
}
if (dspi->version == SPI_VERSION_2) {
if (int_status & SPIFLG_DLEN_ERR_MASK) {
- dev_dbg(sdev, "SPI Data Length Error\n");
+ dev_err(sdev, "SPI Data Length Error\n");
return -EIO;
}
if (int_status & SPIFLG_PARERR_MASK) {
- dev_dbg(sdev, "SPI Parity Error\n");
+ dev_err(sdev, "SPI Parity Error\n");
return -EIO;
}
if (int_status & SPIFLG_OVRRUN_MASK) {
- dev_dbg(sdev, "SPI Data Overrun error\n");
+ dev_err(sdev, "SPI Data Overrun error\n");
return -EIO;
}
if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
- dev_dbg(sdev, "SPI Buffer Init Active\n");
+ dev_err(sdev, "SPI Buffer Init Active\n");
return -EBUSY;
}
}
@@ -703,7 +703,8 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Wait for the transfer to complete */
if (spicfg->io_type != SPI_IO_TYPE_POLL) {
- wait_for_completion_interruptible(&(dspi->done));
+ if (wait_for_completion_timeout(&dspi->done, HZ) == 0)
+ errors = SPIFLG_TIMEOUT_MASK;
} else {
while (dspi->rcount > 0 || dspi->wcount > 0) {
errors = davinci_spi_process_events(dspi);
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index bb1052e748f2..9185f6c08459 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -283,7 +283,7 @@ static void mid_spi_dma_stop(struct dw_spi *dws)
}
}
-static struct dw_spi_dma_ops mid_dma_ops = {
+static const struct dw_spi_dma_ops mid_dma_ops = {
.dma_init = mid_spi_dma_init,
.dma_exit = mid_spi_dma_exit,
.dma_setup = mid_spi_dma_setup,
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 882cd6618cd5..c09bb745693a 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -425,7 +425,7 @@ static int dw_spi_setup(struct spi_device *spi)
chip->type = chip_info->type;
}
- chip->tmode = 0; /* Tx & Rx */
+ chip->tmode = SPI_TMOD_TR;
if (gpio_is_valid(spi->cs_gpio)) {
ret = gpio_direction_output(spi->cs_gpio,
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 35589a270468..61bc3cbab38d 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -130,7 +130,7 @@ struct dw_spi {
struct dma_chan *rxchan;
unsigned long dma_chan_busy;
dma_addr_t dma_addr; /* phy address of the Data register */
- struct dw_spi_dma_ops *dma_ops;
+ const struct dw_spi_dma_ops *dma_ops;
void *dma_tx;
void *dma_rx;
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index c27124a5ec8e..7fd6a4c009d2 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -643,6 +643,11 @@ static int fsl_espi_runtime_resume(struct device *dev)
}
#endif
+static size_t fsl_espi_max_transfer_size(struct spi_device *spi)
+{
+ return SPCOM_TRANLEN_MAX;
+}
+
static struct spi_master * fsl_espi_probe(struct device *dev,
struct resource *mem, unsigned int irq)
{
@@ -670,6 +675,7 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
master->cleanup = fsl_espi_cleanup;
master->transfer_one_message = fsl_espi_do_one_msg;
master->auto_runtime_pm = true;
+ master->max_transfer_size = fsl_espi_max_transfer_size;
mpc8xxx_spi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 0e5723ab47f0..d98c33cb64f9 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -104,9 +104,7 @@ struct spi_imx_data {
unsigned int dma_is_inited;
unsigned int dma_finished;
bool usedma;
- u32 rx_wml;
- u32 tx_wml;
- u32 rxt_wml;
+ u32 wml;
struct completion dma_rx_completion;
struct completion dma_tx_completion;
@@ -124,9 +122,14 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
return d->devtype_data->devtype == IMX35_CSPI;
}
+static inline int is_imx51_ecspi(struct spi_imx_data *d)
+{
+ return d->devtype_data->devtype == IMX51_ECSPI;
+}
+
static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d)
{
- return (d->devtype_data->devtype == IMX51_ECSPI) ? 64 : 8;
+ return is_imx51_ecspi(d) ? 64 : 8;
}
#define MXC_SPI_BUF_RX(type) \
@@ -201,9 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- if (spi_imx->dma_is_inited
- && transfer->len > spi_imx->rx_wml * sizeof(u32)
- && transfer->len > spi_imx->tx_wml * sizeof(u32))
+ if (spi_imx->dma_is_inited &&
+ transfer->len > spi_imx->wml * sizeof(u32))
return true;
return false;
}
@@ -244,6 +246,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_STAT 0x18
#define MX51_ECSPI_STAT_RR (1 << 3)
+#define MX51_ECSPI_TESTREG 0x20
+#define MX51_ECSPI_TESTREG_LBC BIT(31)
+
/* MX51 eCSPI */
static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
unsigned int *fres)
@@ -313,7 +318,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
{
u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0;
u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg;
- u32 clk = config->speed_hz, delay;
+ u32 clk = config->speed_hz, delay, reg;
/*
* The hardware seems to have a race condition when changing modes. The
@@ -351,7 +356,16 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
else
cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+ /* CTRL register always go first to bring out controller from reset */
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
+
+ reg = readl(spi_imx->base + MX51_ECSPI_TESTREG);
+ if (config->mode & SPI_LOOP)
+ reg |= MX51_ECSPI_TESTREG_LBC;
+ else
+ reg &= ~MX51_ECSPI_TESTREG_LBC;
+ writel(reg, spi_imx->base + MX51_ECSPI_TESTREG);
+
writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
/*
@@ -378,10 +392,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
if (spi_imx->dma_is_inited) {
dma = readl(spi_imx->base + MX51_ECSPI_DMA);
- spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2;
- rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
- tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
- rxt_wml_cfg = spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
+ rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
+ tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
+ rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
& ~MX51_ECSPI_DMA_RX_WML_MASK
& ~MX51_ECSPI_DMA_RXT_WML_MASK)
@@ -832,18 +845,21 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
if (of_machine_is_compatible("fsl,imx6dl"))
return 0;
+ spi_imx->wml = spi_imx_get_fifosize(spi_imx) / 2;
+
/* Prepare for TX DMA: */
- master->dma_tx = dma_request_slave_channel(dev, "tx");
- if (!master->dma_tx) {
- dev_err(dev, "cannot get the TX DMA channel!\n");
- ret = -EINVAL;
+ master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(master->dma_tx)) {
+ ret = PTR_ERR(master->dma_tx);
+ dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
+ master->dma_tx = NULL;
goto err;
}
slave_config.direction = DMA_MEM_TO_DEV;
slave_config.dst_addr = res->start + MXC_CSPITXDATA;
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.dst_maxburst = spi_imx_get_fifosize(spi_imx) / 2;
+ slave_config.dst_maxburst = spi_imx->wml;
ret = dmaengine_slave_config(master->dma_tx, &slave_config);
if (ret) {
dev_err(dev, "error in TX dma configuration.\n");
@@ -851,17 +867,18 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
}
/* Prepare for RX : */
- master->dma_rx = dma_request_slave_channel(dev, "rx");
- if (!master->dma_rx) {
- dev_dbg(dev, "cannot get the DMA channel.\n");
- ret = -EINVAL;
+ master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(master->dma_rx)) {
+ ret = PTR_ERR(master->dma_rx);
+ dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
+ master->dma_rx = NULL;
goto err;
}
slave_config.direction = DMA_DEV_TO_MEM;
slave_config.src_addr = res->start + MXC_CSPIRXDATA;
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.src_maxburst = spi_imx_get_fifosize(spi_imx) / 2;
+ slave_config.src_maxburst = spi_imx->wml;
ret = dmaengine_slave_config(master->dma_rx, &slave_config);
if (ret) {
dev_err(dev, "error in RX dma configuration.\n");
@@ -874,8 +891,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
master->max_dma_len = MAX_SDMA_BD_BYTES;
spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
SPI_MASTER_MUST_TX;
- spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
- spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
spi_imx->dma_is_inited = 1;
return 0;
@@ -942,14 +957,22 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
dma = readl(spi_imx->base + MX51_ECSPI_DMA);
dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK);
/* Change RX_DMA_LENGTH trigger dma fetch tail data */
- left = transfer->len % spi_imx->rxt_wml;
+ left = transfer->len % spi_imx->wml;
if (left)
writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET),
spi_imx->base + MX51_ECSPI_DMA);
+ /*
+ * Set these order to avoid potential RX overflow. The overflow may
+ * happen if we enable SPI HW before starting RX DMA due to rescheduling
+ * for another task and/or interrupt.
+ * So RX DMA enabled first to make sure data would be read out from FIFO
+ * ASAP. TX DMA enabled next to start filling TX FIFO with new data.
+ * And finaly SPI HW enabled to start actual data transfer.
+ */
+ dma_async_issue_pending(master->dma_rx);
+ dma_async_issue_pending(master->dma_tx);
spi_imx->devtype_data->trigger(spi_imx);
- dma_async_issue_pending(master->dma_tx);
- dma_async_issue_pending(master->dma_rx);
/* Wait SDMA to finish the data transfer.*/
timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
IMX_DMA_TIMEOUT);
@@ -958,6 +981,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
dev_driver_string(&master->dev),
dev_name(&master->dev));
dmaengine_terminate_all(master->dma_tx);
+ dmaengine_terminate_all(master->dma_rx);
} else {
timeout = wait_for_completion_timeout(
&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
@@ -968,8 +992,9 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
spi_imx->devtype_data->reset(spi_imx);
dmaengine_terminate_all(master->dma_rx);
}
+ dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK;
writel(dma |
- spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
+ spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
spi_imx->base + MX51_ECSPI_DMA);
}
@@ -1117,6 +1142,9 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx = spi_master_get_devdata(master);
spi_imx->bitbang.master = master;
+ spi_imx->devtype_data = of_id ? of_id->data :
+ (struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
+
for (i = 0; i < master->num_chipselect; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
@@ -1142,12 +1170,11 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ if (is_imx51_ecspi(spi_imx))
+ spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
init_completion(&spi_imx->xfer_done);
- spi_imx->devtype_data = of_id ? of_id->data :
- (struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spi_imx->base)) {
@@ -1193,9 +1220,15 @@ static int spi_imx_probe(struct platform_device *pdev)
* Only validated on i.mx6 now, can remove the constrain if validated on
* other chips.
*/
- if (spi_imx->devtype_data == &imx51_ecspi_devtype_data
- && spi_imx_sdma_init(&pdev->dev, spi_imx, master, res))
- dev_err(&pdev->dev, "dma setup error,use pio instead\n");
+ if (is_imx51_ecspi(spi_imx)) {
+ ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+ if (ret == -EPROBE_DEFER)
+ goto out_clk_put;
+
+ if (ret < 0)
+ dev_err(&pdev->dev, "dma setup error %d, use pio\n",
+ ret);
+ }
spi_imx->devtype_data->reset(spi_imx);
diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c
index ba72347cb99d..61ee0f4269ae 100644
--- a/drivers/spi/spi-lm70llp.c
+++ b/drivers/spi/spi-lm70llp.c
@@ -14,6 +14,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -23,11 +25,9 @@
#include <linux/sysfs.h>
#include <linux/workqueue.h>
-
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-
/*
* The LM70 communicates with a host processor using a 3-wire variant of
* the SPI/Microwire bus interface. This driver specifically supports an
@@ -88,7 +88,6 @@ struct spi_lm70llp {
/* REVISIT : ugly global ; provides "exclusive open" facility */
static struct spi_lm70llp *lm70llp;
-
/*-------------------------------------------------------------------*/
static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi)
@@ -122,12 +121,14 @@ static inline void assertCS(struct spi_lm70llp *pp)
static inline void clkHigh(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
+
parport_write_data(pp->port, data | SCLK);
}
static inline void clkLow(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
+
parport_write_data(pp->port, data & ~SCLK);
}
@@ -166,8 +167,10 @@ static inline void setmosi(struct spi_device *s, int is_on)
static inline int getmiso(struct spi_device *s)
{
struct spi_lm70llp *pp = spidev_to_pp(s);
- return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 );
+
+ return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1);
}
+
/*--------------------------------------------------------------------*/
#include "spi-bitbang-txrx.h"
@@ -196,11 +199,10 @@ static void spi_lm70llp_attach(struct parport *p)
struct spi_lm70llp *pp;
struct spi_master *master;
int status;
+ struct pardev_cb lm70llp_cb;
if (lm70llp) {
- printk(KERN_WARNING
- "%s: spi_lm70llp instance already loaded. Aborting.\n",
- DRVNAME);
+ pr_warn("spi_lm70llp instance already loaded. Aborting.\n");
return;
}
@@ -227,9 +229,11 @@ static void spi_lm70llp_attach(struct parport *p)
* Parport hookup
*/
pp->port = p;
- pd = parport_register_device(p, DRVNAME,
- NULL, NULL, NULL,
- PARPORT_FLAG_EXCL, pp);
+ memset(&lm70llp_cb, 0, sizeof(lm70llp_cb));
+ lm70llp_cb.private = pp;
+ lm70llp_cb.flags = PARPORT_FLAG_EXCL;
+ pd = parport_register_dev_model(p, DRVNAME, &lm70llp_cb, 0);
+
if (!pd) {
status = -ENOMEM;
goto out_free_master;
@@ -245,9 +249,8 @@ static void spi_lm70llp_attach(struct parport *p)
*/
status = spi_bitbang_start(&pp->bitbang);
if (status < 0) {
- printk(KERN_WARNING
- "%s: spi_bitbang_start failed with status %d\n",
- DRVNAME, status);
+ dev_warn(&pd->dev, "spi_bitbang_start failed with status %d\n",
+ status);
goto out_off_and_release;
}
@@ -272,9 +275,9 @@ static void spi_lm70llp_attach(struct parport *p)
pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
if (pp->spidev_lm70)
dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
- dev_name(&pp->spidev_lm70->dev));
+ dev_name(&pp->spidev_lm70->dev));
else {
- printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME);
+ dev_warn(&pd->dev, "spi_new_device failed\n");
status = -ENODEV;
goto out_bitbang_stop;
}
@@ -293,9 +296,9 @@ out_off_and_release:
out_parport_unreg:
parport_unregister_device(pd);
out_free_master:
- (void) spi_master_put(master);
+ spi_master_put(master);
out_fail:
- pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status);
+ pr_info("spi_lm70llp probe fail, status %d\n", status);
}
static void spi_lm70llp_detach(struct parport *p)
@@ -314,16 +317,16 @@ static void spi_lm70llp_detach(struct parport *p)
parport_release(pp->pd);
parport_unregister_device(pp->pd);
- (void) spi_master_put(pp->bitbang.master);
+ spi_master_put(pp->bitbang.master);
lm70llp = NULL;
}
-
static struct parport_driver spi_lm70llp_drv = {
.name = DRVNAME,
- .attach = spi_lm70llp_attach,
+ .match_port = spi_lm70llp_attach,
.detach = spi_lm70llp_detach,
+ .devmodel = true,
};
static int __init init_spi_lm70llp(void)
diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
new file mode 100644
index 000000000000..894616f687b0
--- /dev/null
+++ b/drivers/spi/spi-loopback-test.c
@@ -0,0 +1,1005 @@
+/*
+ * linux/drivers/spi/spi-loopback-test.c
+ *
+ * (c) Martin Sperl <kernel@martin.sperl.org>
+ *
+ * Loopback test driver to test several typical spi_message conditions
+ * that a spi_master driver may encounter
+ * this can also get used for regression testing
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/printk.h>
+#include <linux/spi/spi.h>
+
+#include "spi-test.h"
+
+/* flag to only simulate transfers */
+int simulate_only;
+module_param(simulate_only, int, 0);
+MODULE_PARM_DESC(simulate_only, "if not 0 do not execute the spi message");
+
+/* dump spi messages */
+int dump_messages;
+module_param(dump_messages, int, 0);
+MODULE_PARM_DESC(dump_messages,
+ "=1 dump the basic spi_message_structure, " \
+ "=2 dump the spi_message_structure including data, " \
+ "=3 dump the spi_message structure before and after execution");
+/* the device is jumpered for loopback - enabling some rx_buf tests */
+int loopback;
+module_param(loopback, int, 0);
+MODULE_PARM_DESC(loopback,
+ "if set enable loopback mode, where the rx_buf " \
+ "is checked to match tx_buf after the spi_message " \
+ "is executed");
+
+/* run only a specific test */
+int run_only_test = -1;
+module_param(run_only_test, int, 0);
+MODULE_PARM_DESC(run_only_test,
+ "only run the test with this number (0-based !)");
+
+/* the actual tests to execute */
+static struct spi_test spi_tests[] = {
+ {
+ .description = "tx/rx-transfer - start of page",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_rx_align = ITERATE_ALIGN,
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "tx/rx-transfer - crossing PAGE_SIZE",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_rx_align = ITERATE_ALIGN,
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(PAGE_SIZE - 4),
+ .rx_buf = RX(PAGE_SIZE - 4),
+ },
+ },
+ },
+ {
+ .description = "tx-transfer - only",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ },
+ },
+ {
+ .description = "rx-transfer - only",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_rx_align = ITERATE_ALIGN,
+ .transfers = {
+ {
+ .len = 1,
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "two tx-transfers - alter both",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ {
+ .len = 1,
+ /* this is why we cant use ITERATE_MAX_LEN */
+ .tx_buf = TX(SPI_TEST_MAX_SIZE_HALF),
+ },
+ },
+ },
+ {
+ .description = "two tx-transfers - alter first",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(64),
+ },
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ },
+ },
+ {
+ .description = "two tx-transfers - alter second",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0),
+ .transfers = {
+ {
+ .len = 16,
+ .tx_buf = TX(0),
+ },
+ {
+ .len = 1,
+ .tx_buf = TX(64),
+ },
+ },
+ },
+ {
+ .description = "two transfers tx then rx - alter both",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ {
+ .len = 1,
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "two transfers tx then rx - alter tx",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ {
+ .len = 1,
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "two transfers tx then rx - alter rx",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ },
+ {
+ .len = 1,
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "two tx+rx transfers - alter both",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0) | BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ },
+ {
+ .len = 1,
+ /* making sure we align without overwrite
+ * the reason we can not use ITERATE_MAX_LEN
+ */
+ .tx_buf = TX(SPI_TEST_MAX_SIZE_HALF),
+ .rx_buf = RX(SPI_TEST_MAX_SIZE_HALF),
+ },
+ },
+ },
+ {
+ .description = "two tx+rx transfers - alter first",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(0),
+ .transfers = {
+ {
+ .len = 1,
+ /* making sure we align without overwrite */
+ .tx_buf = TX(1024),
+ .rx_buf = RX(1024),
+ },
+ {
+ .len = 1,
+ /* making sure we align without overwrite */
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ },
+ },
+ },
+ {
+ .description = "two tx+rx transfers - alter second",
+ .fill_option = FILL_COUNT_8,
+ .iterate_len = { ITERATE_MAX_LEN },
+ .iterate_tx_align = ITERATE_ALIGN,
+ .iterate_transfer_mask = BIT(1),
+ .transfers = {
+ {
+ .len = 1,
+ .tx_buf = TX(0),
+ .rx_buf = RX(0),
+ },
+ {
+ .len = 1,
+ /* making sure we align without overwrite */
+ .tx_buf = TX(1024),
+ .rx_buf = RX(1024),
+ },
+ },
+ },
+
+ { /* end of tests sequence */ }
+};
+
+static int spi_loopback_test_probe(struct spi_device *spi)
+{
+ int ret;
+
+ dev_info(&spi->dev, "Executing spi-loopback-tests\n");
+
+ ret = spi_test_run_tests(spi, spi_tests);
+
+ dev_info(&spi->dev, "Finished spi-loopback-tests with return: %i\n",
+ ret);
+
+ return ret;
+}
+
+/* non const match table to permit to change via a module parameter */
+static struct of_device_id spi_loopback_test_of_match[] = {
+ { .compatible = "linux,spi-loopback-test", },
+ { }
+};
+
+/* allow to override the compatible string via a module_parameter */
+module_param_string(compatible, spi_loopback_test_of_match[0].compatible,
+ sizeof(spi_loopback_test_of_match[0].compatible),
+ 0000);
+
+MODULE_DEVICE_TABLE(of, spi_loopback_test_of_match);
+
+static struct spi_driver spi_loopback_test_driver = {
+ .driver = {
+ .name = "spi-loopback-test",
+ .owner = THIS_MODULE,
+ .of_match_table = spi_loopback_test_of_match,
+ },
+ .probe = spi_loopback_test_probe,
+};
+
+module_spi_driver(spi_loopback_test_driver);
+
+MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
+MODULE_DESCRIPTION("test spi_driver to check core functionality");
+MODULE_LICENSE("GPL");
+
+/*-------------------------------------------------------------------------*/
+
+/* spi_test implementation */
+
+#define RANGE_CHECK(ptr, plen, start, slen) \
+ ((ptr >= start) && (ptr + plen <= start + slen))
+
+/* we allocate one page more, to allow for offsets */
+#define SPI_TEST_MAX_SIZE_PLUS (SPI_TEST_MAX_SIZE + PAGE_SIZE)
+
+static void spi_test_print_hex_dump(char *pre, const void *ptr, size_t len)
+{
+ /* limit the hex_dump */
+ if (len < 1024) {
+ print_hex_dump(KERN_INFO, pre,
+ DUMP_PREFIX_OFFSET, 16, 1,
+ ptr, len, 0);
+ return;
+ }
+ /* print head */
+ print_hex_dump(KERN_INFO, pre,
+ DUMP_PREFIX_OFFSET, 16, 1,
+ ptr, 512, 0);
+ /* print tail */
+ pr_info("%s truncated - continuing at offset %04zx\n",
+ pre, len - 512);
+ print_hex_dump(KERN_INFO, pre,
+ DUMP_PREFIX_OFFSET, 16, 1,
+ ptr + (len - 512), 512, 0);
+}
+
+static void spi_test_dump_message(struct spi_device *spi,
+ struct spi_message *msg,
+ bool dump_data)
+{
+ struct spi_transfer *xfer;
+ int i;
+ u8 b;
+
+ dev_info(&spi->dev, " spi_msg@%pK\n", msg);
+ if (msg->status)
+ dev_info(&spi->dev, " status: %i\n",
+ msg->status);
+ dev_info(&spi->dev, " frame_length: %i\n",
+ msg->frame_length);
+ dev_info(&spi->dev, " actual_length: %i\n",
+ msg->actual_length);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ dev_info(&spi->dev, " spi_transfer@%pK\n", xfer);
+ dev_info(&spi->dev, " len: %i\n", xfer->len);
+ dev_info(&spi->dev, " tx_buf: %pK\n", xfer->tx_buf);
+ if (dump_data && xfer->tx_buf)
+ spi_test_print_hex_dump(" TX: ",
+ xfer->tx_buf,
+ xfer->len);
+
+ dev_info(&spi->dev, " rx_buf: %pK\n", xfer->rx_buf);
+ if (dump_data && xfer->rx_buf)
+ spi_test_print_hex_dump(" RX: ",
+ xfer->rx_buf,
+ xfer->len);
+ /* check for unwritten test pattern on rx_buf */
+ if (xfer->rx_buf) {
+ for (i = 0 ; i < xfer->len ; i++) {
+ b = ((u8 *)xfer->rx_buf)[xfer->len - 1 - i];
+ if (b != SPI_TEST_PATTERN_UNWRITTEN)
+ break;
+ }
+ if (i)
+ dev_info(&spi->dev,
+ " rx_buf filled with %02x starts at offset: %i\n",
+ SPI_TEST_PATTERN_UNWRITTEN,
+ xfer->len - i);
+ }
+ }
+}
+
+struct rx_ranges {
+ struct list_head list;
+ u8 *start;
+ u8 *end;
+};
+
+int rx_ranges_cmp(void *priv, struct list_head *a, struct list_head *b)
+{
+ struct rx_ranges *rx_a = list_entry(a, struct rx_ranges, list);
+ struct rx_ranges *rx_b = list_entry(b, struct rx_ranges, list);
+
+ if (rx_a->start > rx_b->start)
+ return 1;
+ if (rx_a->start < rx_b->start)
+ return -1;
+ return 0;
+}
+
+static int spi_check_rx_ranges(struct spi_device *spi,
+ struct spi_message *msg,
+ void *rx)
+{
+ struct spi_transfer *xfer;
+ struct rx_ranges ranges[SPI_TEST_MAX_TRANSFERS], *r;
+ int i = 0;
+ LIST_HEAD(ranges_list);
+ u8 *addr;
+ int ret = 0;
+
+ /* loop over all transfers to fill in the rx_ranges */
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ /* if there is no rx, then no check is needed */
+ if (!xfer->rx_buf)
+ continue;
+ /* fill in the rx_range */
+ if (RANGE_CHECK(xfer->rx_buf, xfer->len,
+ rx, SPI_TEST_MAX_SIZE_PLUS)) {
+ ranges[i].start = xfer->rx_buf;
+ ranges[i].end = xfer->rx_buf + xfer->len;
+ list_add(&ranges[i].list, &ranges_list);
+ i++;
+ }
+ }
+
+ /* if no ranges, then we can return and avoid the checks...*/
+ if (!i)
+ return 0;
+
+ /* sort the list */
+ list_sort(NULL, &ranges_list, rx_ranges_cmp);
+
+ /* and iterate over all the rx addresses */
+ for (addr = rx; addr < (u8 *)rx + SPI_TEST_MAX_SIZE_PLUS; addr++) {
+ /* if we are the DO not write pattern,
+ * then continue with the loop...
+ */
+ if (*addr == SPI_TEST_PATTERN_DO_NOT_WRITE)
+ continue;
+
+ /* check if we are inside a range */
+ list_for_each_entry(r, &ranges_list, list) {
+ /* if so then set to end... */
+ if ((addr >= r->start) && (addr < r->end))
+ addr = r->end;
+ }
+ /* second test after a (hopefull) translation */
+ if (*addr == SPI_TEST_PATTERN_DO_NOT_WRITE)
+ continue;
+
+ /* if still not found then something has modified too much */
+ /* we could list the "closest" transfer here... */
+ dev_err(&spi->dev,
+ "loopback strangeness - rx changed outside of allowed range at: %pK\n",
+ addr);
+ /* do not return, only set ret,
+ * so that we list all addresses
+ */
+ ret = -ERANGE;
+ }
+
+ return ret;
+}
+
+static int spi_test_check_loopback_result(struct spi_device *spi,
+ struct spi_message *msg,
+ void *tx, void *rx)
+{
+ struct spi_transfer *xfer;
+ u8 rxb, txb;
+ size_t i;
+ int ret;
+
+ /* checks rx_buffer pattern are valid with loopback or without */
+ ret = spi_check_rx_ranges(spi, msg, rx);
+ if (ret)
+ return ret;
+
+ /* if we run without loopback, then return now */
+ if (!loopback)
+ return 0;
+
+ /* if applicable to transfer check that rx_buf is equal to tx_buf */
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ /* if there is no rx, then no check is needed */
+ if (!xfer->rx_buf)
+ continue;
+ /* so depending on tx_buf we need to handle things */
+ if (xfer->tx_buf) {
+ for (i = 1; i < xfer->len; i++) {
+ txb = ((u8 *)xfer->tx_buf)[i];
+ rxb = ((u8 *)xfer->rx_buf)[i];
+ if (txb != rxb)
+ goto mismatch_error;
+ }
+ } else {
+ /* first byte received */
+ txb = ((u8 *)xfer->rx_buf)[0];
+ /* first byte may be 0 or xff */
+ if (!((txb == 0) || (txb == 0xff))) {
+ dev_err(&spi->dev,
+ "loopback strangeness - we expect 0x00 or 0xff, but not 0x%02x\n",
+ txb);
+ return -EINVAL;
+ }
+ /* check that all bytes are identical */
+ for (i = 1; i < xfer->len; i++) {
+ rxb = ((u8 *)xfer->rx_buf)[i];
+ if (rxb != txb)
+ goto mismatch_error;
+ }
+ }
+ }
+
+ return 0;
+
+mismatch_error:
+ dev_err(&spi->dev,
+ "loopback strangeness - transfer missmatch on byte %04zx - expected 0x%02x, but got 0x%02x\n",
+ i, txb, rxb);
+
+ return -EINVAL;
+}
+
+static int spi_test_translate(struct spi_device *spi,
+ void **ptr, size_t len,
+ void *tx, void *rx)
+{
+ size_t off;
+
+ /* return on null */
+ if (!*ptr)
+ return 0;
+
+ /* in the MAX_SIZE_HALF case modify the pointer */
+ if (((size_t)*ptr) & SPI_TEST_MAX_SIZE_HALF)
+ /* move the pointer to the correct range */
+ *ptr += (SPI_TEST_MAX_SIZE_PLUS / 2) -
+ SPI_TEST_MAX_SIZE_HALF;
+
+ /* RX range
+ * - we check against MAX_SIZE_PLUS to allow for automated alignment
+ */
+ if (RANGE_CHECK(*ptr, len, RX(0), SPI_TEST_MAX_SIZE_PLUS)) {
+ off = *ptr - RX(0);
+ *ptr = rx + off;
+
+ return 0;
+ }
+
+ /* TX range */
+ if (RANGE_CHECK(*ptr, len, TX(0), SPI_TEST_MAX_SIZE_PLUS)) {
+ off = *ptr - TX(0);
+ *ptr = tx + off;
+
+ return 0;
+ }
+
+ dev_err(&spi->dev,
+ "PointerRange [%pK:%pK[ not in range [%pK:%pK[ or [%pK:%pK[\n",
+ *ptr, *ptr + len,
+ RX(0), RX(SPI_TEST_MAX_SIZE),
+ TX(0), TX(SPI_TEST_MAX_SIZE));
+
+ return -EINVAL;
+}
+
+static int spi_test_fill_pattern(struct spi_device *spi,
+ struct spi_test *test)
+{
+ struct spi_transfer *xfers = test->transfers;
+ u8 *tx_buf;
+ size_t count = 0;
+ int i, j;
+
+#ifdef __BIG_ENDIAN
+#define GET_VALUE_BYTE(value, index, bytes) \
+ (value >> (8 * (bytes - 1 - count % bytes)))
+#else
+#define GET_VALUE_BYTE(value, index, bytes) \
+ (value >> (8 * (count % bytes)))
+#endif
+
+ /* fill all transfers with the pattern requested */
+ for (i = 0; i < test->transfer_count; i++) {
+ /* fill rx_buf with SPI_TEST_PATTERN_UNWRITTEN */
+ if (xfers[i].rx_buf)
+ memset(xfers[i].rx_buf, SPI_TEST_PATTERN_UNWRITTEN,
+ xfers[i].len);
+ /* if tx_buf is NULL then skip */
+ tx_buf = (u8 *)xfers[i].tx_buf;
+ if (!tx_buf)
+ continue;
+ /* modify all the transfers */
+ for (j = 0; j < xfers[i].len; j++, tx_buf++, count++) {
+ /* fill tx */
+ switch (test->fill_option) {
+ case FILL_MEMSET_8:
+ *tx_buf = test->fill_pattern;
+ break;
+ case FILL_MEMSET_16:
+ *tx_buf = GET_VALUE_BYTE(test->fill_pattern,
+ count, 2);
+ break;
+ case FILL_MEMSET_24:
+ *tx_buf = GET_VALUE_BYTE(test->fill_pattern,
+ count, 3);
+ break;
+ case FILL_MEMSET_32:
+ *tx_buf = GET_VALUE_BYTE(test->fill_pattern,
+ count, 4);
+ break;
+ case FILL_COUNT_8:
+ *tx_buf = count;
+ break;
+ case FILL_COUNT_16:
+ *tx_buf = GET_VALUE_BYTE(count, count, 2);
+ break;
+ case FILL_COUNT_24:
+ *tx_buf = GET_VALUE_BYTE(count, count, 3);
+ break;
+ case FILL_COUNT_32:
+ *tx_buf = GET_VALUE_BYTE(count, count, 4);
+ break;
+ case FILL_TRANSFER_BYTE_8:
+ *tx_buf = j;
+ break;
+ case FILL_TRANSFER_BYTE_16:
+ *tx_buf = GET_VALUE_BYTE(j, j, 2);
+ break;
+ case FILL_TRANSFER_BYTE_24:
+ *tx_buf = GET_VALUE_BYTE(j, j, 3);
+ break;
+ case FILL_TRANSFER_BYTE_32:
+ *tx_buf = GET_VALUE_BYTE(j, j, 4);
+ break;
+ case FILL_TRANSFER_NUM:
+ *tx_buf = i;
+ break;
+ default:
+ dev_err(&spi->dev,
+ "unsupported fill_option: %i\n",
+ test->fill_option);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int _spi_test_run_iter(struct spi_device *spi,
+ struct spi_test *test,
+ void *tx, void *rx)
+{
+ struct spi_message *msg = &test->msg;
+ struct spi_transfer *x;
+ int i, ret;
+
+ /* initialize message - zero-filled via static initialization */
+ spi_message_init_no_memset(msg);
+
+ /* fill rx with the DO_NOT_WRITE pattern */
+ memset(rx, SPI_TEST_PATTERN_DO_NOT_WRITE, SPI_TEST_MAX_SIZE_PLUS);
+
+ /* add the individual transfers */
+ for (i = 0; i < test->transfer_count; i++) {
+ x = &test->transfers[i];
+
+ /* patch the values of tx_buf */
+ ret = spi_test_translate(spi, (void **)&x->tx_buf, x->len,
+ (void *)tx, rx);
+ if (ret)
+ return ret;
+
+ /* patch the values of rx_buf */
+ ret = spi_test_translate(spi, &x->rx_buf, x->len,
+ (void *)tx, rx);
+ if (ret)
+ return ret;
+
+ /* and add it to the list */
+ spi_message_add_tail(x, msg);
+ }
+
+ /* fill in the transfer buffers with pattern */
+ ret = spi_test_fill_pattern(spi, test);
+ if (ret)
+ return ret;
+
+ /* and execute */
+ if (test->execute_msg)
+ ret = test->execute_msg(spi, test, tx, rx);
+ else
+ ret = spi_test_execute_msg(spi, test, tx, rx);
+
+ /* handle result */
+ if (ret == test->expected_return)
+ return 0;
+
+ dev_err(&spi->dev,
+ "test failed - test returned %i, but we expect %i\n",
+ ret, test->expected_return);
+
+ if (ret)
+ return ret;
+
+ /* if it is 0, as we expected something else,
+ * then return something special
+ */
+ return -EFAULT;
+}
+
+static int spi_test_run_iter(struct spi_device *spi,
+ const struct spi_test *testtemplate,
+ void *tx, void *rx,
+ size_t len,
+ size_t tx_off,
+ size_t rx_off
+ )
+{
+ struct spi_test test;
+ int i, tx_count, rx_count;
+
+ /* copy the test template to test */
+ memcpy(&test, testtemplate, sizeof(test));
+
+ /* set up test->transfers to the correct count */
+ if (!test.transfer_count) {
+ for (i = 0;
+ (i < SPI_TEST_MAX_TRANSFERS) && test.transfers[i].len;
+ i++) {
+ test.transfer_count++;
+ }
+ }
+
+ /* if iterate_transfer_mask is not set,
+ * then set it to first transfer only
+ */
+ if (!(test.iterate_transfer_mask & (BIT(test.transfer_count) - 1)))
+ test.iterate_transfer_mask = 1;
+
+ /* count number of transfers with tx/rx_buf != NULL */
+ for (i = 0; i < test.transfer_count; i++) {
+ if (test.transfers[i].tx_buf)
+ tx_count++;
+ if (test.transfers[i].rx_buf)
+ rx_count++;
+ }
+
+ /* in some iteration cases warn and exit early,
+ * as there is nothing to do, that has not been tested already...
+ */
+ if (tx_off && (!tx_count)) {
+ dev_warn_once(&spi->dev,
+ "%s: iterate_tx_off configured with tx_buf==NULL - ignoring\n",
+ test.description);
+ return 0;
+ }
+ if (rx_off && (!rx_count)) {
+ dev_warn_once(&spi->dev,
+ "%s: iterate_rx_off configured with rx_buf==NULL - ignoring\n",
+ test.description);
+ return 0;
+ }
+
+ /* write out info */
+ if (!(len || tx_off || rx_off)) {
+ dev_info(&spi->dev, "Running test %s\n", test.description);
+ } else {
+ dev_info(&spi->dev,
+ " with iteration values: len = %zu, tx_off = %zu, rx_off = %zu\n",
+ len, tx_off, rx_off);
+ }
+
+ /* update in the values from iteration values */
+ for (i = 0; i < test.transfer_count; i++) {
+ /* only when bit in transfer mask is set */
+ if (!(test.iterate_transfer_mask & BIT(i)))
+ continue;
+ if (len)
+ test.transfers[i].len = len;
+ if (test.transfers[i].tx_buf)
+ test.transfers[i].tx_buf += tx_off;
+ if (test.transfers[i].tx_buf)
+ test.transfers[i].rx_buf += rx_off;
+ }
+
+ /* and execute */
+ return _spi_test_run_iter(spi, &test, tx, rx);
+}
+
+/**
+ * spi_test_execute_msg - default implementation to run a test
+ *
+ * spi: @spi_device on which to run the @spi_message
+ * test: the test to execute, which already contains @msg
+ * tx: the tx buffer allocated for the test sequence
+ * rx: the rx buffer allocated for the test sequence
+ *
+ * Returns: error code of spi_sync as well as basic error checking
+ */
+int spi_test_execute_msg(struct spi_device *spi, struct spi_test *test,
+ void *tx, void *rx)
+{
+ struct spi_message *msg = &test->msg;
+ int ret = 0;
+ int i;
+
+ /* only if we do not simulate */
+ if (!simulate_only) {
+ /* dump the complete message before and after the transfer */
+ if (dump_messages == 3)
+ spi_test_dump_message(spi, msg, true);
+
+ /* run spi message */
+ ret = spi_sync(spi, msg);
+ if (ret == -ETIMEDOUT) {
+ dev_info(&spi->dev,
+ "spi-message timed out - reruning...\n");
+ /* rerun after a few explicit schedules */
+ for (i = 0; i < 16; i++)
+ schedule();
+ ret = spi_sync(spi, msg);
+ }
+ if (ret) {
+ dev_err(&spi->dev,
+ "Failed to execute spi_message: %i\n",
+ ret);
+ goto exit;
+ }
+
+ /* do some extra error checks */
+ if (msg->frame_length != msg->actual_length) {
+ dev_err(&spi->dev,
+ "actual length differs from expected\n");
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* run rx-buffer tests */
+ ret = spi_test_check_loopback_result(spi, msg, tx, rx);
+ }
+
+ /* if requested or on error dump message (including data) */
+exit:
+ if (dump_messages || ret)
+ spi_test_dump_message(spi, msg,
+ (dump_messages >= 2) || (ret));
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_test_execute_msg);
+
+/**
+ * spi_test_run_test - run an individual spi_test
+ * including all the relevant iterations on:
+ * length and buffer alignment
+ *
+ * spi: the spi_device to send the messages to
+ * test: the test which we need to execute
+ * tx: the tx buffer allocated for the test sequence
+ * rx: the rx buffer allocated for the test sequence
+ *
+ * Returns: status code of spi_sync or other failures
+ */
+
+int spi_test_run_test(struct spi_device *spi, const struct spi_test *test,
+ void *tx, void *rx)
+{
+ int idx_len;
+ size_t len;
+ size_t tx_align, rx_align;
+ int ret;
+
+ /* test for transfer limits */
+ if (test->transfer_count >= SPI_TEST_MAX_TRANSFERS) {
+ dev_err(&spi->dev,
+ "%s: Exceeded max number of transfers with %i\n",
+ test->description, test->transfer_count);
+ return -E2BIG;
+ }
+
+ /* setting up some values in spi_message
+ * based on some settings in spi_master
+ * some of this can also get done in the run() method
+ */
+
+ /* iterate over all the iterable values using macros
+ * (to make it a bit more readable...
+ */
+#define FOR_EACH_ITERATE(var, defaultvalue) \
+ for (idx_##var = -1, var = defaultvalue; \
+ ((idx_##var < 0) || \
+ ( \
+ (idx_##var < SPI_TEST_MAX_ITERATE) && \
+ (var = test->iterate_##var[idx_##var]) \
+ ) \
+ ); \
+ idx_##var++)
+#define FOR_EACH_ALIGNMENT(var) \
+ for (var = 0; \
+ var < (test->iterate_##var ? \
+ (spi->master->dma_alignment ? \
+ spi->master->dma_alignment : \
+ test->iterate_##var) : \
+ 1); \
+ var++)
+
+ FOR_EACH_ITERATE(len, 0) {
+ FOR_EACH_ALIGNMENT(tx_align) {
+ FOR_EACH_ALIGNMENT(rx_align) {
+ /* and run the iteration */
+ ret = spi_test_run_iter(spi, test,
+ tx, rx,
+ len,
+ tx_align,
+ rx_align);
+ if (ret)
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_test_run_test);
+
+/**
+ * spi_test_run_tests - run an array of spi_messages tests
+ * @spi: the spi device on which to run the tests
+ * @tests: NULL-terminated array of @spi_test
+ *
+ * Returns: status errors as per @spi_test_run_test()
+ */
+
+int spi_test_run_tests(struct spi_device *spi,
+ struct spi_test *tests)
+{
+ char *rx = NULL, *tx = NULL;
+ int ret = 0, count = 0;
+ struct spi_test *test;
+
+ /* allocate rx/tx buffers of 128kB size without devm
+ * in the hope that is on a page boundary
+ */
+ rx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
+ if (!rx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ tx = kzalloc(SPI_TEST_MAX_SIZE_PLUS, GFP_KERNEL);
+ if (!tx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* now run the individual tests in the table */
+ for (test = tests, count = 0; test->description[0];
+ test++, count++) {
+ /* only run test if requested */
+ if ((run_only_test > -1) && (count != run_only_test))
+ continue;
+ /* run custom implementation */
+ if (test->run_test)
+ ret = test->run_test(spi, test, tx, rx);
+ else
+ ret = spi_test_run_test(spi, test, tx, rx);
+ if (ret)
+ goto out;
+ /* add some delays so that we can easily
+ * detect the individual tests when using a logic analyzer
+ * we also add scheduling to avoid potential spi_timeouts...
+ */
+ mdelay(100);
+ schedule();
+ }
+
+out:
+ kfree(rx);
+ kfree(tx);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_test_run_tests);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 7840067062a8..0be89e052428 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -95,8 +95,7 @@ struct mtk_spi {
const struct mtk_spi_compatible *dev_comp;
};
-static const struct mtk_spi_compatible mt6589_compat;
-static const struct mtk_spi_compatible mt8135_compat;
+static const struct mtk_spi_compatible mtk_common_compat;
static const struct mtk_spi_compatible mt8173_compat = {
.need_pad_sel = true,
.must_tx = true,
@@ -112,9 +111,18 @@ static const struct mtk_chip_config mtk_default_chip_info = {
};
static const struct of_device_id mtk_spi_of_match[] = {
- { .compatible = "mediatek,mt6589-spi", .data = (void *)&mt6589_compat },
- { .compatible = "mediatek,mt8135-spi", .data = (void *)&mt8135_compat },
- { .compatible = "mediatek,mt8173-spi", .data = (void *)&mt8173_compat },
+ { .compatible = "mediatek,mt2701-spi",
+ .data = (void *)&mtk_common_compat,
+ },
+ { .compatible = "mediatek,mt6589-spi",
+ .data = (void *)&mtk_common_compat,
+ },
+ { .compatible = "mediatek,mt8135-spi",
+ .data = (void *)&mtk_common_compat,
+ },
+ { .compatible = "mediatek,mt8173-spi",
+ .data = (void *)&mt8173_compat,
+ },
{}
};
MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
@@ -154,9 +162,6 @@ static int mtk_spi_prepare_message(struct spi_master *master,
reg_val |= SPI_CMD_CPOL;
else
reg_val &= ~SPI_CMD_CPOL;
- writel(reg_val, mdata->base + SPI_CMD_REG);
-
- reg_val = readl(mdata->base + SPI_CMD_REG);
/* set the mlsbx and mlsbtx */
if (chip_config->tx_mlsb)
@@ -323,7 +328,8 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
- int cnt;
+ int cnt, remainder;
+ u32 reg_val;
struct mtk_spi *mdata = spi_master_get_devdata(master);
mdata->cur_transfer = xfer;
@@ -331,12 +337,16 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
mtk_spi_prepare_transfer(master, xfer);
mtk_spi_setup_packet(master);
- if (xfer->len % 4)
- cnt = xfer->len / 4 + 1;
- else
- cnt = xfer->len / 4;
+ cnt = xfer->len / 4;
iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+ remainder = xfer->len % 4;
+ if (remainder > 0) {
+ reg_val = 0;
+ memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
+ writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ }
+
mtk_spi_enable_transfer(master);
return 1;
@@ -418,7 +428,7 @@ static int mtk_spi_setup(struct spi_device *spi)
static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
{
- u32 cmd, reg_val, cnt;
+ u32 cmd, reg_val, cnt, remainder;
struct spi_master *master = dev_id;
struct mtk_spi *mdata = spi_master_get_devdata(master);
struct spi_transfer *trans = mdata->cur_transfer;
@@ -431,12 +441,15 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
if (!master->can_dma(master, master->cur_msg->spi, trans)) {
if (trans->rx_buf) {
- if (mdata->xfer_len % 4)
- cnt = mdata->xfer_len / 4 + 1;
- else
- cnt = mdata->xfer_len / 4;
+ cnt = mdata->xfer_len / 4;
ioread32_rep(mdata->base + SPI_RX_DATA_REG,
trans->rx_buf, cnt);
+ remainder = mdata->xfer_len % 4;
+ if (remainder > 0) {
+ reg_val = readl(mdata->base + SPI_RX_DATA_REG);
+ memcpy(trans->rx_buf + (cnt * 4),
+ &reg_val, remainder);
+ }
}
spi_finalize_current_transfer(master);
return IRQ_HANDLED;
@@ -610,7 +623,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
- goto err_disable_clk;
+ clk_disable_unprepare(mdata->spi_clk);
+ goto err_put_master;
}
clk_disable_unprepare(mdata->spi_clk);
@@ -620,7 +634,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
- goto err_put_master;
+ goto err_disable_runtime_pm;
}
if (mdata->dev_comp->need_pad_sel) {
@@ -629,14 +643,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
"pad_num does not match num_chipselect(%d != %d)\n",
mdata->pad_num, master->num_chipselect);
ret = -EINVAL;
- goto err_put_master;
+ goto err_disable_runtime_pm;
}
if (!master->cs_gpios && master->num_chipselect > 1) {
dev_err(&pdev->dev,
"cs_gpios not specified and num_chipselect > 1\n");
ret = -EINVAL;
- goto err_put_master;
+ goto err_disable_runtime_pm;
}
if (master->cs_gpios) {
@@ -647,7 +661,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"can't get CS GPIO %i\n", i);
- goto err_put_master;
+ goto err_disable_runtime_pm;
}
}
}
@@ -655,8 +669,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
return 0;
-err_disable_clk:
- clk_disable_unprepare(mdata->spi_clk);
+err_disable_runtime_pm:
+ pm_runtime_disable(&pdev->dev);
err_put_master:
spi_master_put(master);
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 1f8903d356e5..7273820275e9 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -24,6 +24,7 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/omap-dma.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -1024,6 +1025,16 @@ static int omap2_mcspi_setup(struct spi_device *spi)
spi->controller_state = cs;
/* Link this to context save list */
list_add_tail(&cs->node, &ctx->cs);
+
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
+ if (ret) {
+ dev_err(&spi->dev, "failed to request gpio\n");
+ return ret;
+ }
+ gpio_direction_output(spi->cs_gpio,
+ !(spi->mode & SPI_CS_HIGH));
+ }
}
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) {
@@ -1032,15 +1043,6 @@ static int omap2_mcspi_setup(struct spi_device *spi)
return ret;
}
- if (gpio_is_valid(spi->cs_gpio)) {
- ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
- if (ret) {
- dev_err(&spi->dev, "failed to request gpio\n");
- return ret;
- }
- gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
- }
-
ret = pm_runtime_get_sync(mcspi->dev);
if (ret < 0)
return ret;
@@ -1536,14 +1538,23 @@ static int omap2_mcspi_resume(struct device *dev)
}
pm_runtime_mark_last_busy(mcspi->dev);
pm_runtime_put_autosuspend(mcspi->dev);
- return 0;
+
+ return pinctrl_pm_select_default_state(dev);
+}
+
+static int omap2_mcspi_suspend(struct device *dev)
+{
+ return pinctrl_pm_select_sleep_state(dev);
}
+
#else
+#define omap2_mcspi_suspend NULL
#define omap2_mcspi_resume NULL
#endif
static const struct dev_pm_ops omap2_mcspi_pm_ops = {
.resume = omap2_mcspi_resume,
+ .suspend = omap2_mcspi_suspend,
.runtime_resume = omap_mcspi_runtime_resume,
};
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b25dc71b0ea9..ab9914ad8365 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1567,9 +1567,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
if (!is_quark_x1000_ssp(drv_data))
pxa2xx_spi_write(drv_data, SSPSP, 0);
- if (is_lpss_ssp(drv_data))
- lpss_ssp_setup(drv_data);
-
if (is_lpss_ssp(drv_data)) {
lpss_ssp_setup(drv_data);
config = lpss_get_config(drv_data);
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 8e86e7f6663a..5a76a50063b5 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -133,7 +133,6 @@
struct s3c64xx_spi_dma_data {
struct dma_chan *ch;
enum dma_transfer_direction direction;
- unsigned int dmach;
};
/**
@@ -325,7 +324,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
/* Acquire DMA channels */
sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
- (void *)(long)sdd->rx_dma.dmach, dev, "rx");
+ sdd->cntrlr_info->dma_rx, dev, "rx");
if (!sdd->rx_dma.ch) {
dev_err(dev, "Failed to get RX DMA channel\n");
ret = -EBUSY;
@@ -334,7 +333,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
spi->dma_rx = sdd->rx_dma.ch;
sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
- (void *)(long)sdd->tx_dma.dmach, dev, "tx");
+ sdd->cntrlr_info->dma_tx, dev, "tx");
if (!sdd->tx_dma.ch) {
dev_err(dev, "Failed to get TX DMA channel\n");
ret = -EBUSY;
@@ -1028,7 +1027,6 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
static int s3c64xx_spi_probe(struct platform_device *pdev)
{
struct resource *mem_res;
- struct resource *res;
struct s3c64xx_spi_driver_data *sdd;
struct s3c64xx_spi_info *sci = dev_get_platdata(&pdev->dev);
struct spi_master *master;
@@ -1087,20 +1085,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
sdd->cur_bpw = 8;
- if (!sdd->pdev->dev.of_node) {
- res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!res) {
- dev_warn(&pdev->dev, "Unable to get SPI tx dma resource. Switching to poll mode\n");
- sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
- } else
- sdd->tx_dma.dmach = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!res) {
- dev_warn(&pdev->dev, "Unable to get SPI rx dma resource. Switching to poll mode\n");
- sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
- } else
- sdd->rx_dma.dmach = res->start;
+ if (!sdd->pdev->dev.of_node && (!sci->dma_tx || !sci->dma_rx)) {
+ dev_warn(&pdev->dev, "Unable to get SPI tx/rx DMA data. Switching to poll mode\n");
+ sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
}
sdd->tx_dma.direction = DMA_MEM_TO_DEV;
@@ -1197,9 +1184,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
sdd->port_id, master->num_chipselect);
- dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%d, Tx-%d]\n",
+ dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%p, Tx-%p]\n",
mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1,
- sdd->rx_dma.dmach, sdd->tx_dma.dmach);
+ sci->dma_rx, sci->dma_tx);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
@@ -1370,12 +1357,6 @@ static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
}, {
.name = "s3c6410-spi",
.driver_data = (kernel_ulong_t)&s3c6410_spi_port_config,
- }, {
- .name = "s5pv210-spi",
- .driver_data = (kernel_ulong_t)&s5pv210_spi_port_config,
- }, {
- .name = "exynos4210-spi",
- .driver_data = (kernel_ulong_t)&exynos4_spi_port_config,
},
{ },
};
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index fbb0a4d74e91..1ddd9e2309b6 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -140,6 +140,9 @@ static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
reg &= ~SUN4I_CTL_CS_MASK;
reg |= SUN4I_CTL_CS(spi->chip_select);
+ /* We want to control the chip select manually */
+ reg |= SUN4I_CTL_CS_MANUAL;
+
if (enable)
reg |= SUN4I_CTL_CS_LEVEL;
else
@@ -222,15 +225,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
else
reg |= SUN4I_CTL_DHB;
- /* We want to control the chip select manually */
- reg |= SUN4I_CTL_CS_MANUAL;
-
sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
/* Ensure that we have a parent clock fast enough */
mclk_rate = clk_get_rate(sspi->mclk);
- if (mclk_rate < (2 * spi->max_speed_hz)) {
- clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ if (mclk_rate < (2 * tfr->speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
mclk_rate = clk_get_rate(sspi->mclk);
}
@@ -248,14 +248,14 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
* First try CDR2, and if we can't reach the expected
* frequency, fall back to CDR1.
*/
- div = mclk_rate / (2 * spi->max_speed_hz);
+ div = mclk_rate / (2 * tfr->speed_hz);
if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
if (div > 0)
div--;
reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
} else {
- div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
reg = SUN4I_CLK_CTL_CDR1(div);
}
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index ac48f59705a8..42e2c4bd690a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -217,8 +217,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
/* Ensure that we have a parent clock fast enough */
mclk_rate = clk_get_rate(sspi->mclk);
- if (mclk_rate < (2 * spi->max_speed_hz)) {
- clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ if (mclk_rate < (2 * tfr->speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
mclk_rate = clk_get_rate(sspi->mclk);
}
@@ -236,14 +236,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
* First try CDR2, and if we can't reach the expected
* frequency, fall back to CDR1.
*/
- div = mclk_rate / (2 * spi->max_speed_hz);
+ div = mclk_rate / (2 * tfr->speed_hz);
if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
if (div > 0)
div--;
reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
} else {
- div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
reg = SUN6I_CLK_CTL_CDR1(div);
}
diff --git a/drivers/spi/spi-test.h b/drivers/spi/spi-test.h
new file mode 100644
index 000000000000..922c52833239
--- /dev/null
+++ b/drivers/spi/spi-test.h
@@ -0,0 +1,136 @@
+/*
+ * linux/drivers/spi/spi-test.h
+ *
+ * (c) Martin Sperl <kernel@martin.sperl.org>
+ *
+ * spi_test definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spi/spi.h>
+
+#define SPI_TEST_MAX_TRANSFERS 4
+#define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE)
+#define SPI_TEST_MAX_ITERATE 32
+
+/* the "dummy" start addresses used in spi_test
+ * these addresses get translated at a later stage
+ */
+#define RX_START BIT(30)
+#define TX_START BIT(31)
+#define RX(off) ((void *)(RX_START + off))
+#define TX(off) ((void *)(TX_START + off))
+
+/* some special defines for offsets */
+#define SPI_TEST_MAX_SIZE_HALF BIT(29)
+
+/* detection pattern for unfinished reads...
+ * - 0x00 or 0xff could be valid levels for tx_buf = NULL,
+ * so we do not use either of them
+ */
+#define SPI_TEST_PATTERN_UNWRITTEN 0xAA
+#define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55
+#define SPI_TEST_CHECK_DO_NOT_WRITE 64
+
+/**
+ * struct spi_test - describes a specific (set of) tests to execute
+ *
+ * @description: description of the test
+ *
+ * @msg: a template @spi_message usedfor the default settings
+ * @transfers: array of @spi_transfers that are part of the
+ * resulting spi_message. The first transfer with len == 0
+ * signifies the end of the list
+ * @transfer_count: normally computed number of transfers with len > 0
+ *
+ * @run_test: run a specific spi_test - this allows to override
+ * the default implementation of @spi_test_run_transfer
+ * either to add some custom filters for a specific test
+ * or to effectively run some very custom tests...
+ * @execute_msg: run the spi_message for real - this allows to override
+ * @spi_test_execute_msg to apply final modifications
+ * on the spi_message
+ * @expected_return: the expected return code - in some cases we want to
+ * test also for error conditions
+ *
+ * @iterate_len: list of length to iterate on (in addition to the
+ * explicitly set @spi_transfer.len)
+ * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
+ * for all values in the below range if set.
+ * the ranges are:
+ * [0 : @spi_master.dma_alignment[ if set
+ * [0 : iterate_tx_align[ if unset
+ * @iterate_rx_align: change the alignment of @spi_transfer.rx_buf
+ * see @iterate_tx_align for details
+ * @iterate_transfer_mask: the bitmask of transfers to which the iterations
+ * apply - if 0, then it applies to all transfer
+ *
+ * @fill_option: define the way how tx_buf is filled
+ * @fill_pattern: fill pattern to apply to the tx_buf
+ * (used in some of the @fill_options)
+ */
+
+struct spi_test {
+ char description[64];
+ struct spi_message msg;
+ struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS];
+ unsigned int transfer_count;
+ int (*run_test)(struct spi_device *spi, struct spi_test *test,
+ void *tx, void *rx);
+ int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
+ void *tx, void *rx);
+ int expected_return;
+ /* iterate over all the non-zero values */
+ int iterate_len[SPI_TEST_MAX_ITERATE];
+ int iterate_tx_align;
+ int iterate_rx_align;
+ u32 iterate_transfer_mask;
+ /* the tx-fill operation */
+ u32 fill_option;
+#define FILL_MEMSET_8 0 /* just memset with 8 bit */
+#define FILL_MEMSET_16 1 /* just memset with 16 bit */
+#define FILL_MEMSET_24 2 /* just memset with 24 bit */
+#define FILL_MEMSET_32 3 /* just memset with 32 bit */
+#define FILL_COUNT_8 4 /* fill with a 8 byte counter */
+#define FILL_COUNT_16 5 /* fill with a 16 bit counter */
+#define FILL_COUNT_24 6 /* fill with a 24 bit counter */
+#define FILL_COUNT_32 7 /* fill with a 32 bit counter */
+#define FILL_TRANSFER_BYTE_8 8 /* fill with the transfer byte - 8 bit */
+#define FILL_TRANSFER_BYTE_16 9 /* fill with the transfer byte - 16 bit */
+#define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */
+#define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
+#define FILL_TRANSFER_NUM 16 /* fill with the transfer number */
+ u32 fill_pattern;
+};
+
+/* default implementation for @spi_test.run_test */
+int spi_test_run_test(struct spi_device *spi,
+ const struct spi_test *test,
+ void *tx, void *rx);
+
+/* default implementation for @spi_test.execute_msg */
+int spi_test_execute_msg(struct spi_device *spi,
+ struct spi_test *test,
+ void *tx, void *rx);
+
+/* function to execute a set of tests */
+int spi_test_run_tests(struct spi_device *spi,
+ struct spi_test *tests);
+
+/* some of the default @spi_transfer.len to test */
+#define ITERATE_LEN 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
+ 1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
+
+#define ITERATE_MAX_LEN ITERATE_LEN, SPI_TEST_MAX_SIZE - 1, SPI_TEST_MAX_SIZE
+
+/* the default alignment to test */
+#define ITERATE_ALIGN sizeof(int)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index f23f36ebaf3d..aab9b492c627 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -917,9 +917,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,
*/
static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device,
- dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
spi_master_suspend(master);
@@ -940,9 +938,7 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device,
- dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
int ret = 0;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 151b01c25b40..47eff8012a77 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -84,8 +84,7 @@ static ssize_t spi_device_##field##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
- struct spi_device *spi = container_of(dev, \
- struct spi_device, dev); \
+ struct spi_device *spi = to_spi_device(dev); \
return spi_statistics_##field##_show(&spi->statistics, buf); \
} \
static struct device_attribute dev_attr_spi_device_##field = { \
@@ -605,6 +604,24 @@ struct spi_device *spi_new_device(struct spi_master *master,
}
EXPORT_SYMBOL_GPL(spi_new_device);
+/**
+ * spi_unregister_device - unregister a single SPI device
+ * @spi: spi_device to unregister
+ *
+ * Start making the passed SPI device vanish. Normally this would be handled
+ * by spi_unregister_master().
+ */
+void spi_unregister_device(struct spi_device *spi)
+{
+ if (!spi)
+ return;
+
+ if (spi->dev.of_node)
+ of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
+ device_unregister(&spi->dev);
+}
+EXPORT_SYMBOL_GPL(spi_unregister_device);
+
static void spi_match_master_to_boardinfo(struct spi_master *master,
struct spi_board_info *bi)
{
@@ -1548,6 +1565,8 @@ static void of_register_spi_devices(struct spi_master *master)
return;
for_each_available_child_of_node(master->dev.of_node, nc) {
+ if (of_node_test_and_set_flag(nc, OF_POPULATED))
+ continue;
spi = of_register_spi_device(master, nc);
if (IS_ERR(spi))
dev_warn(&master->dev, "Failed to create SPI device for %s\n",
@@ -2636,6 +2655,11 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action,
if (master == NULL)
return NOTIFY_OK; /* not for us */
+ if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+ put_device(&master->dev);
+ return NOTIFY_OK;
+ }
+
spi = of_register_spi_device(master, rd->dn);
put_device(&master->dev);
@@ -2647,6 +2671,10 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action,
break;
case OF_RECONFIG_CHANGE_REMOVE:
+ /* already depopulated? */
+ if (!of_node_check_flag(rd->dn, OF_POPULATED))
+ return NOTIFY_OK;
+
/* find our device by node */
spi = of_find_spi_device_by_node(rd->dn);
if (spi == NULL)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index d0e7dfc647cf..e3c19f30f591 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -284,7 +284,7 @@ static int spidev_message(struct spidev_data *spidev,
k_tmp->speed_hz = spidev->speed_hz;
#ifdef VERBOSE
dev_dbg(&spidev->spi->dev,
- " xfer len %zd %s%s%s%dbits %u usec %uHz\n",
+ " xfer len %u %s%s%s%dbits %u usec %uHz\n",
u_tmp->len,
u_tmp->rx_buf ? "rx " : "",
u_tmp->tx_buf ? "tx " : "",
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index d3889b98a1a1..fb5625bcca9a 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -40,6 +40,8 @@ struct s3c64xx_spi_info {
int num_cs;
int (*cfg_gpio)(void);
dma_filter_fn filter;
+ void *dma_tx;
+ void *dma_rx;
};
/**
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index cce80e6dc7d1..53be3a4c60cb 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -425,6 +425,12 @@ struct spi_master {
#define SPI_MASTER_MUST_RX BIT(3) /* requires rx */
#define SPI_MASTER_MUST_TX BIT(4) /* requires tx */
+ /*
+ * on some hardware transfer size may be constrained
+ * the limit may depend on device transfer settings
+ */
+ size_t (*max_transfer_size)(struct spi_device *spi);
+
/* lock and mutex for SPI bus locking */
spinlock_t bus_lock_spinlock;
struct mutex bus_lock_mutex;
@@ -762,10 +768,15 @@ struct spi_message {
void *state;
};
+static inline void spi_message_init_no_memset(struct spi_message *m)
+{
+ INIT_LIST_HEAD(&m->transfers);
+}
+
static inline void spi_message_init(struct spi_message *m)
{
memset(m, 0, sizeof *m);
- INIT_LIST_HEAD(&m->transfers);
+ spi_message_init_no_memset(m);
}
static inline void
@@ -832,6 +843,15 @@ extern int spi_async(struct spi_device *spi, struct spi_message *message);
extern int spi_async_locked(struct spi_device *spi,
struct spi_message *message);
+static inline size_t
+spi_max_transfer_size(struct spi_device *spi)
+{
+ struct spi_master *master = spi->master;
+ if (!master->max_transfer_size)
+ return SIZE_MAX;
+ return master->max_transfer_size(spi);
+}
+
/*---------------------------------------------------------------------------*/
/* All these synchronous SPI transfer routines are utilities layered
@@ -1115,12 +1135,7 @@ spi_add_device(struct spi_device *spi);
extern struct spi_device *
spi_new_device(struct spi_master *, struct spi_board_info *);
-static inline void
-spi_unregister_device(struct spi_device *spi)
-{
- if (spi)
- device_unregister(&spi->dev);
-}
+extern void spi_unregister_device(struct spi_device *spi);
extern const struct spi_device_id *
spi_get_device_id(const struct spi_device *sdev);
diff --git a/tools/Makefile b/tools/Makefile
index 0ba0df3b516f..1dc6900468ed 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -17,6 +17,7 @@ help:
@echo ' lguest - a minimal 32-bit x86 hypervisor'
@echo ' perf - Linux performance measurement and analysis tool'
@echo ' selftests - various kernel selftests'
+ @echo ' spi - spi tools'
@echo ' turbostat - Intel CPU idle stats and freq reporting tool'
@echo ' usb - USB testing tools'
@echo ' virtio - vhost test module'
@@ -52,7 +53,7 @@ acpi: FORCE
cpupower: FORCE
$(call descend,power/$@)
-cgroup firewire hv guest usb virtio vm net iio: FORCE
+cgroup firewire hv guest spi usb virtio vm net iio: FORCE
$(call descend,$@)
liblockdep: FORCE
@@ -118,7 +119,7 @@ acpi_clean:
cpupower_clean:
$(call descend,power/cpupower,clean)
-cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean iio_clean:
+cgroup_clean hv_clean firewire_clean lguest_clean spi_clean usb_clean virtio_clean vm_clean net_clean iio_clean:
$(call descend,$(@:_clean=),clean)
liblockdep_clean:
@@ -143,7 +144,7 @@ freefall_clean:
$(call descend,laptop/freefall,clean)
clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \
- perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \
+ perf_clean selftests_clean turbostat_clean spi_clean usb_clean virtio_clean \
vm_clean net_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
freefall_clean
diff --git a/Documentation/spi/.gitignore b/tools/spi/.gitignore
index 4280576397e8..4280576397e8 100644
--- a/Documentation/spi/.gitignore
+++ b/tools/spi/.gitignore
diff --git a/tools/spi/Makefile b/tools/spi/Makefile
new file mode 100644
index 000000000000..cd0db62e4d9d
--- /dev/null
+++ b/tools/spi/Makefile
@@ -0,0 +1,4 @@
+all: spidev_test spidev_fdx
+
+clean:
+ $(RM) spidev_test spidev_fdx
diff --git a/Documentation/spi/spidev_fdx.c b/tools/spi/spidev_fdx.c
index 0ea3e51292fc..0ea3e51292fc 100644
--- a/Documentation/spi/spidev_fdx.c
+++ b/tools/spi/spidev_fdx.c
diff --git a/Documentation/spi/spidev_test.c b/tools/spi/spidev_test.c
index 135b3f592b83..8a73d8185316 100644
--- a/Documentation/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -19,6 +19,7 @@
#include <getopt.h>
#include <fcntl.h>
#include <sys/ioctl.h>
+#include <sys/stat.h>
#include <linux/types.h>
#include <linux/spi/spidev.h>
@@ -33,6 +34,8 @@ static void pabort(const char *s)
static const char *device = "/dev/spidev1.1";
static uint32_t mode;
static uint8_t bits = 8;
+static char *input_file;
+static char *output_file;
static uint32_t speed = 500000;
static uint16_t delay;
static int verbose;
@@ -49,7 +52,8 @@ uint8_t default_tx[] = {
uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
char *input_tx;
-static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix)
+static void hex_dump(const void *src, size_t length, size_t line_size,
+ char *prefix)
{
int i = 0;
const unsigned char *address = src;
@@ -83,13 +87,17 @@ static void hex_dump(const void *src, size_t length, size_t line_size, char *pre
static int unescape(char *_dst, char *_src, size_t len)
{
int ret = 0;
+ int match;
char *src = _src;
char *dst = _dst;
unsigned int ch;
while (*src) {
if (*src == '\\' && *(src+1) == 'x') {
- sscanf(src + 2, "%2x", &ch);
+ match = sscanf(src + 2, "%2x", &ch);
+ if (!match)
+ pabort("malformed input string");
+
src += 4;
*dst++ = (unsigned char)ch;
} else {
@@ -103,7 +111,7 @@ static int unescape(char *_dst, char *_src, size_t len)
static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
{
int ret;
-
+ int out_fd;
struct spi_ioc_transfer tr = {
.tx_buf = (unsigned long)tx,
.rx_buf = (unsigned long)rx,
@@ -134,7 +142,21 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
if (verbose)
hex_dump(tx, len, 32, "TX");
- hex_dump(rx, len, 32, "RX");
+
+ if (output_file) {
+ out_fd = open(output_file, O_WRONLY | O_CREAT | O_TRUNC, 0666);
+ if (out_fd < 0)
+ pabort("could not open output file");
+
+ ret = write(out_fd, rx, len);
+ if (ret != len)
+ pabort("not all bytes written to output file");
+
+ close(out_fd);
+ }
+
+ if (verbose || !output_file)
+ hex_dump(rx, len, 32, "RX");
}
static void print_usage(const char *prog)
@@ -143,7 +165,9 @@ static void print_usage(const char *prog)
puts(" -D --device device to use (default /dev/spidev1.1)\n"
" -s --speed max speed (Hz)\n"
" -d --delay delay (usec)\n"
- " -b --bpw bits per word \n"
+ " -b --bpw bits per word\n"
+ " -i --input input data from a file (e.g. \"test.bin\")\n"
+ " -o --output output data to a file (e.g. \"results.bin\")\n"
" -l --loop loopback\n"
" -H --cpha clock phase\n"
" -O --cpol clock polarity\n"
@@ -167,6 +191,8 @@ static void parse_opts(int argc, char *argv[])
{ "speed", 1, 0, 's' },
{ "delay", 1, 0, 'd' },
{ "bpw", 1, 0, 'b' },
+ { "input", 1, 0, 'i' },
+ { "output", 1, 0, 'o' },
{ "loop", 0, 0, 'l' },
{ "cpha", 0, 0, 'H' },
{ "cpol", 0, 0, 'O' },
@@ -182,7 +208,8 @@ static void parse_opts(int argc, char *argv[])
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:v",
+ lopts, NULL);
if (c == -1)
break;
@@ -200,6 +227,12 @@ static void parse_opts(int argc, char *argv[])
case 'b':
bits = atoi(optarg);
break;
+ case 'i':
+ input_file = optarg;
+ break;
+ case 'o':
+ output_file = optarg;
+ break;
case 'l':
mode |= SPI_LOOP;
break;
@@ -249,13 +282,63 @@ static void parse_opts(int argc, char *argv[])
}
}
+static void transfer_escaped_string(int fd, char *str)
+{
+ size_t size = strlen(str + 1);
+ uint8_t *tx;
+ uint8_t *rx;
+
+ tx = malloc(size);
+ if (!tx)
+ pabort("can't allocate tx buffer");
+
+ rx = malloc(size);
+ if (!rx)
+ pabort("can't allocate rx buffer");
+
+ size = unescape((char *)tx, str, size);
+ transfer(fd, tx, rx, size);
+ free(rx);
+ free(tx);
+}
+
+static void transfer_file(int fd, char *filename)
+{
+ ssize_t bytes;
+ struct stat sb;
+ int tx_fd;
+ uint8_t *tx;
+ uint8_t *rx;
+
+ if (stat(filename, &sb) == -1)
+ pabort("can't stat input file");
+
+ tx_fd = open(filename, O_RDONLY);
+ if (fd < 0)
+ pabort("can't open input file");
+
+ tx = malloc(sb.st_size);
+ if (!tx)
+ pabort("can't allocate tx buffer");
+
+ rx = malloc(sb.st_size);
+ if (!rx)
+ pabort("can't allocate rx buffer");
+
+ bytes = read(tx_fd, tx, sb.st_size);
+ if (bytes != sb.st_size)
+ pabort("failed to read input file");
+
+ transfer(fd, tx, rx, sb.st_size);
+ free(rx);
+ free(tx);
+ close(tx_fd);
+}
+
int main(int argc, char *argv[])
{
int ret = 0;
int fd;
- uint8_t *tx;
- uint8_t *rx;
- int size;
parse_opts(argc, argv);
@@ -300,17 +383,15 @@ int main(int argc, char *argv[])
printf("bits per word: %d\n", bits);
printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);
- if (input_tx) {
- size = strlen(input_tx+1);
- tx = malloc(size);
- rx = malloc(size);
- size = unescape((char *)tx, input_tx, size);
- transfer(fd, tx, rx, size);
- free(rx);
- free(tx);
- } else {
+ if (input_tx && input_file)
+ pabort("only one of -p and --input may be selected");
+
+ if (input_tx)
+ transfer_escaped_string(fd, input_tx);
+ else if (input_file)
+ transfer_file(fd, input_file);
+ else
transfer(fd, default_tx, default_rx, sizeof(default_tx));
- }
close(fd);