diff options
557 files changed, 18777 insertions, 6704 deletions
diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt index 77db8809bd96..b3a7e7d384f6 100644 --- a/Documentation/bcache.txt +++ b/Documentation/bcache.txt @@ -319,7 +319,10 @@ cache<0..n> Symlink to each of the cache devices comprising this cache set. cache_available_percent - Percentage of cache device free. + Percentage of cache device which doesn't contain dirty data, and could + potentially be used for writeback. This doesn't mean this space isn't used + for clean cached data; the unused statistic (in priority_stats) is typically + much lower. clear_stats Clears the statistics associated with this cache @@ -423,8 +426,11 @@ nbuckets Total buckets in this cache priority_stats - Statistics about how recently data in the cache has been accessed. This can - reveal your working set size. + Statistics about how recently data in the cache has been accessed. + This can reveal your working set size. Unused is the percentage of + the cache that doesn't contain any data. Metadata is bcache's + metadata overhead. Average is the average priority of cache buckets. + Next is a list of quantiles with the priority threshold of each. written Sum of all data that has been written to the cache; comparison with diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 08f01e79c41a..b9015912bca6 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -498,12 +498,8 @@ Your cooperation is appreciated. Each device type has 5 bits (32 minors). - 13 block 8-bit MFM/RLL/IDE controller - 0 = /dev/xda First XT disk whole disk - 64 = /dev/xdb Second XT disk whole disk - - Partitions are handled in the same way as IDE disks - (see major number 3). + 13 block Previously used for the XT disk (/dev/xdN) + Deleted in kernel v3.9. 14 char Open Sound System (OSS) 0 = /dev/mixer Mixer control diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt index 19bca04b81c9..6256ec31666d 100644 --- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt +++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt @@ -3,6 +3,11 @@ ST-Ericsson Nomadik Device Tree Bindings For various board the "board" node may contain specific properties that pertain to this particular board, such as board-specific GPIOs. +Required root node property: src +- Nomadik System and reset controller used for basic chip control, clock + and reset line control. +- compatible: must be "stericsson,nomadik,src" + Boards with the Nomadik SoC include: S8815 "MiniKit" manufactured by Calao Systems: diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt new file mode 100644 index 000000000000..cedc2a9c4785 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -0,0 +1,49 @@ +Device tree bindings for i.MX Wireless External Interface Module (WEIM) + +The term "wireless" does not imply that the WEIM is literally an interface +without wires. It simply means that this module was originally designed for +wireless and mobile applications that use low-power technology. + +The actual devices are instantiated from the child nodes of a WEIM node. + +Required properties: + + - compatible: Should be set to "fsl,imx6q-weim" + - reg: A resource specifier for the register space + (see the example below) + - clocks: the clock, see the example below. + - #address-cells: Must be set to 2 to allow memory address translation + - #size-cells: Must be set to 1 to allow CS address passing + - ranges: Must be set up to reflect the memory layout with four + integer values for each chip-select line in use: + + <cs-number> 0 <physical address of mapping> <size> + +Timing property for child nodes. It is mandatory, not optional. + + - fsl,weim-cs-timing: The timing array, contains 6 timing values for the + child node. We can get the CS index from the child + node's "reg" property. This property contains the values + for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1, + EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order. + +Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: + + weim: weim@021b8000 { + compatible = "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + clocks = <&clks 196>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt index bd0c8416a5c8..0045433eae1f 100644 --- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt +++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt @@ -9,6 +9,9 @@ Required properties: "altr,socfpga-pll-clock" - for a PLL clock "altr,socfpga-perip-clock" - The peripheral clock divided from the PLL clock. + "altr,socfpga-gate-clk" - Clocks that directly feed peripherals and + can get gated. + - reg : shall be the control register offset from CLOCK_MANAGER's base for the clock. - clocks : shall be the input parent clock phandle for the clock. This is either an oscillator or a pll output. @@ -16,3 +19,7 @@ Required properties: Optional properties: - fixed-divider : If clocks have a fixed divider value, use this property. +- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register + and the bit index. +- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift, + and width. diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index d71b4b2c077d..f46f5625d8ad 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -184,6 +184,19 @@ clocks and IDs. cko2 170 srtc_gate 171 pata_gate 172 + sata_gate 173 + spdif_xtal_sel 174 + spdif0_sel 175 + spdif1_sel 176 + spdif0_pred 177 + spdif0_podf 178 + spdif1_pred 179 + spdif1_podf 180 + spdif0_com_sel 181 + spdif1_com_sel 182 + spdif0_gate 183 + spdif1_gate 184 + spdif_ipg_gate 185 Examples (for mx53): diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 6deb6fd1c7cd..a0e104f0527e 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -208,6 +208,7 @@ clocks and IDs. pll4_post_div 193 pll5_post_div 194 pll5_video_div 195 + eim_slow 196 Examples: diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt new file mode 100644 index 000000000000..15e40bdf147d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt @@ -0,0 +1,10 @@ +* Clock bindings for Freescale i.MX6 SoloLite + +Required properties: +- compatible: Should be "fsl,imx6sl-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h +for the full list of i.MX6 SoloLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt index d6cb083b90a2..0c80c2677104 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -12,253 +12,9 @@ Required properties : - clocks : Should contain phandle and clock specifiers for two clocks: the 32 KHz "32k_in", and the board-specific oscillator "osc". - #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the CAR. - - The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB - registers. These IDs often match those in the CAR's RST_DEVICES registers, - but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In - this case, those clocks are assigned IDs above 160 in order to highlight - this issue. Implementations that interpret these clock IDs as bit values - within the CLK_OUT_ENB or RST_DEVICES registers should be careful to - explicitly handle these special cases. - - The balance of the clocks controlled by the CAR are assigned IDs of 160 and - above. - - 0 unassigned - 1 unassigned - 2 unassigned - 3 unassigned - 4 rtc - 5 timer - 6 uarta - 7 unassigned (register bit affects uartb and vfir) - 8 unassigned - 9 sdmmc2 - 10 unassigned (register bit affects spdif_in and spdif_out) - 11 i2s1 - 12 i2c1 - 13 ndflash - 14 sdmmc1 - 15 sdmmc4 - 16 unassigned - 17 pwm - 18 i2s2 - 19 epp - 20 unassigned (register bit affects vi and vi_sensor) - 21 2d - 22 usbd - 23 isp - 24 3d - 25 unassigned - 26 disp2 - 27 disp1 - 28 host1x - 29 vcp - 30 i2s0 - 31 unassigned - - 32 unassigned - 33 unassigned - 34 apbdma - 35 unassigned - 36 kbc - 37 unassigned - 38 unassigned - 39 unassigned (register bit affects fuse and fuse_burn) - 40 kfuse - 41 sbc1 - 42 nor - 43 unassigned - 44 sbc2 - 45 unassigned - 46 sbc3 - 47 i2c5 - 48 dsia - 49 unassigned - 50 mipi - 51 hdmi - 52 csi - 53 unassigned - 54 i2c2 - 55 uartc - 56 mipi-cal - 57 emc - 58 usb2 - 59 usb3 - 60 msenc - 61 vde - 62 bsea - 63 bsev - - 64 unassigned - 65 uartd - 66 unassigned - 67 i2c3 - 68 sbc4 - 69 sdmmc3 - 70 unassigned - 71 owr - 72 afi - 73 csite - 74 unassigned - 75 unassigned - 76 la - 77 trace - 78 soc_therm - 79 dtv - 80 ndspeed - 81 i2cslow - 82 dsib - 83 tsec - 84 unassigned - 85 unassigned - 86 unassigned - 87 unassigned - 88 unassigned - 89 xusb_host - 90 unassigned - 91 msenc - 92 csus - 93 unassigned - 94 unassigned - 95 unassigned (bit affects xusb_dev and xusb_dev_src) - - 96 unassigned - 97 unassigned - 98 unassigned - 99 mselect - 100 tsensor - 101 i2s3 - 102 i2s4 - 103 i2c4 - 104 sbc5 - 105 sbc6 - 106 d_audio - 107 apbif - 108 dam0 - 109 dam1 - 110 dam2 - 111 hda2codec_2x - 112 unassigned - 113 audio0_2x - 114 audio1_2x - 115 audio2_2x - 116 audio3_2x - 117 audio4_2x - 118 spdif_2x - 119 actmon - 120 extern1 - 121 extern2 - 122 extern3 - 123 unassigned - 124 unassigned - 125 hda - 126 unassigned - 127 se - - 128 hda2hdmi - 129 unassigned - 130 unassigned - 131 unassigned - 132 unassigned - 133 unassigned - 134 unassigned - 135 unassigned - 136 unassigned - 137 unassigned - 138 unassigned - 139 unassigned - 140 unassigned - 141 unassigned - 142 unassigned - 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src, - xusb_host_src and xusb_ss_src) - 144 cilab - 145 cilcd - 146 cile - 147 dsialp - 148 dsiblp - 149 unassigned - 150 dds - 151 unassigned - 152 dp2 - 153 amx - 154 adx - 155 unassigned (bit affects dfll_ref and dfll_soc) - 156 xusb_ss - - 192 uartb - 193 vfir - 194 spdif_in - 195 spdif_out - 196 vi - 197 vi_sensor - 198 fuse - 199 fuse_burn - 200 clk_32k - 201 clk_m - 202 clk_m_div2 - 203 clk_m_div4 - 204 pll_ref - 205 pll_c - 206 pll_c_out1 - 207 pll_c2 - 208 pll_c3 - 209 pll_m - 210 pll_m_out1 - 211 pll_p - 212 pll_p_out1 - 213 pll_p_out2 - 214 pll_p_out3 - 215 pll_p_out4 - 216 pll_a - 217 pll_a_out0 - 218 pll_d - 219 pll_d_out0 - 220 pll_d2 - 221 pll_d2_out0 - 222 pll_u - 223 pll_u_480M - 224 pll_u_60M - 225 pll_u_48M - 226 pll_u_12M - 227 pll_x - 228 pll_x_out0 - 229 pll_re_vco - 230 pll_re_out - 231 pll_e_out0 - 232 spdif_in_sync - 233 i2s0_sync - 234 i2s1_sync - 235 i2s2_sync - 236 i2s3_sync - 237 i2s4_sync - 238 vimclk_sync - 239 audio0 - 240 audio1 - 241 audio2 - 242 audio3 - 243 audio4 - 244 spdif - 245 clk_out_1 - 246 clk_out_2 - 247 clk_out_3 - 248 blink - 252 xusb_host_src - 253 xusb_falcon_src - 254 xusb_fs_src - 255 xusb_ss_src - 256 xusb_dev_src - 257 xusb_dev - 258 xusb_hs_src - 259 sclk - 260 hclk - 261 pclk - 262 cclk_g - 263 cclk_lp - 264 dfll_ref - 265 dfll_soc + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + <dt-bindings/clock/tegra114-car.h>. Example SoC include file: @@ -270,7 +26,7 @@ Example SoC include file: }; usb@c5004000 { - clocks = <&tegra_car 58>; /* usb2 */ + clocks = <&tegra_car TEGRA114_CLK_USB2>; }; }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index e885680f6b45..fcfed5bf73fb 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -12,155 +12,9 @@ Required properties : - clocks : Should contain phandle and clock specifiers for two clocks: the 32 KHz "32k_in", and the board-specific oscillator "osc". - #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the CAR. - - The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB - registers. These IDs often match those in the CAR's RST_DEVICES registers, - but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In - this case, those clocks are assigned IDs above 95 in order to highlight - this issue. Implementations that interpret these clock IDs as bit values - within the CLK_OUT_ENB or RST_DEVICES registers should be careful to - explicitly handle these special cases. - - The balance of the clocks controlled by the CAR are assigned IDs of 96 and - above. - - 0 cpu - 1 unassigned - 2 unassigned - 3 ac97 - 4 rtc - 5 tmr - 6 uart1 - 7 unassigned (register bit affects uart2 and vfir) - 8 gpio - 9 sdmmc2 - 10 unassigned (register bit affects spdif_in and spdif_out) - 11 i2s1 - 12 i2c1 - 13 ndflash - 14 sdmmc1 - 15 sdmmc4 - 16 twc - 17 pwm - 18 i2s2 - 19 epp - 20 unassigned (register bit affects vi and vi_sensor) - 21 2d - 22 usbd - 23 isp - 24 3d - 25 ide - 26 disp2 - 27 disp1 - 28 host1x - 29 vcp - 30 unassigned - 31 cache2 - - 32 mem - 33 ahbdma - 34 apbdma - 35 unassigned - 36 kbc - 37 stat_mon - 38 pmc - 39 fuse - 40 kfuse - 41 sbc1 - 42 snor - 43 spi1 - 44 sbc2 - 45 xio - 46 sbc3 - 47 dvc - 48 dsi - 49 unassigned (register bit affects tvo and cve) - 50 mipi - 51 hdmi - 52 csi - 53 tvdac - 54 i2c2 - 55 uart3 - 56 unassigned - 57 emc - 58 usb2 - 59 usb3 - 60 mpe - 61 vde - 62 bsea - 63 bsev - - 64 speedo - 65 uart4 - 66 uart5 - 67 i2c3 - 68 sbc4 - 69 sdmmc3 - 70 pcie - 71 owr - 72 afi - 73 csite - 74 unassigned - 75 avpucq - 76 la - 77 unassigned - 78 unassigned - 79 unassigned - 80 unassigned - 81 unassigned - 82 unassigned - 83 unassigned - 84 irama - 85 iramb - 86 iramc - 87 iramd - 88 cram2 - 89 audio_2x a/k/a audio_2x_sync_clk - 90 clk_d - 91 unassigned - 92 sus - 93 cdev2 - 94 cdev1 - 95 unassigned - - 96 uart2 - 97 vfir - 98 spdif_in - 99 spdif_out - 100 vi - 101 vi_sensor - 102 tvo - 103 cve - 104 osc - 105 clk_32k a/k/a clk_s - 106 clk_m - 107 sclk - 108 cclk - 109 hclk - 110 pclk - 111 blink - 112 pll_a - 113 pll_a_out0 - 114 pll_c - 115 pll_c_out1 - 116 pll_d - 117 pll_d_out0 - 118 pll_e - 119 pll_m - 120 pll_m_out1 - 121 pll_p - 122 pll_p_out1 - 123 pll_p_out2 - 124 pll_p_out3 - 125 pll_p_out4 - 126 pll_s - 127 pll_u - 128 pll_x - 129 cop a/k/a avp - 130 audio a/k/a audio_sync_clk - 131 pll_ref - 132 twd + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + <dt-bindings/clock/tegra20-car.h>. Example SoC include file: @@ -172,7 +26,7 @@ Example SoC include file: }; usb@c5004000 { - clocks = <&tegra_car 58>; /* usb2 */ + clocks = <&tegra_car TEGRA20_CLK_USB2>; }; }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt index f3da3be5fcad..0f714081e986 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt @@ -12,212 +12,9 @@ Required properties : - clocks : Should contain phandle and clock specifiers for two clocks: the 32 KHz "32k_in", and the board-specific oscillator "osc". - #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the CAR. - - The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB - registers. These IDs often match those in the CAR's RST_DEVICES registers, - but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In - this case, those clocks are assigned IDs above 160 in order to highlight - this issue. Implementations that interpret these clock IDs as bit values - within the CLK_OUT_ENB or RST_DEVICES registers should be careful to - explicitly handle these special cases. - - The balance of the clocks controlled by the CAR are assigned IDs of 160 and - above. - - 0 cpu - 1 unassigned - 2 unassigned - 3 unassigned - 4 rtc - 5 timer - 6 uarta - 7 unassigned (register bit affects uartb and vfir) - 8 gpio - 9 sdmmc2 - 10 unassigned (register bit affects spdif_in and spdif_out) - 11 i2s1 - 12 i2c1 - 13 ndflash - 14 sdmmc1 - 15 sdmmc4 - 16 unassigned - 17 pwm - 18 i2s2 - 19 epp - 20 unassigned (register bit affects vi and vi_sensor) - 21 2d - 22 usbd - 23 isp - 24 3d - 25 unassigned - 26 disp2 - 27 disp1 - 28 host1x - 29 vcp - 30 i2s0 - 31 cop_cache - - 32 mc - 33 ahbdma - 34 apbdma - 35 unassigned - 36 kbc - 37 statmon - 38 pmc - 39 unassigned (register bit affects fuse and fuse_burn) - 40 kfuse - 41 sbc1 - 42 nor - 43 unassigned - 44 sbc2 - 45 unassigned - 46 sbc3 - 47 i2c5 - 48 dsia - 49 unassigned (register bit affects cve and tvo) - 50 mipi - 51 hdmi - 52 csi - 53 tvdac - 54 i2c2 - 55 uartc - 56 unassigned - 57 emc - 58 usb2 - 59 usb3 - 60 mpe - 61 vde - 62 bsea - 63 bsev - - 64 speedo - 65 uartd - 66 uarte - 67 i2c3 - 68 sbc4 - 69 sdmmc3 - 70 pcie - 71 owr - 72 afi - 73 csite - 74 pciex - 75 avpucq - 76 la - 77 unassigned - 78 unassigned - 79 dtv - 80 ndspeed - 81 i2cslow - 82 dsib - 83 unassigned - 84 irama - 85 iramb - 86 iramc - 87 iramd - 88 cram2 - 89 unassigned - 90 audio_2x a/k/a audio_2x_sync_clk - 91 unassigned - 92 csus - 93 cdev2 - 94 cdev1 - 95 unassigned - - 96 cpu_g - 97 cpu_lp - 98 3d2 - 99 mselect - 100 tsensor - 101 i2s3 - 102 i2s4 - 103 i2c4 - 104 sbc5 - 105 sbc6 - 106 d_audio - 107 apbif - 108 dam0 - 109 dam1 - 110 dam2 - 111 hda2codec_2x - 112 atomics - 113 audio0_2x - 114 audio1_2x - 115 audio2_2x - 116 audio3_2x - 117 audio4_2x - 118 audio5_2x - 119 actmon - 120 extern1 - 121 extern2 - 122 extern3 - 123 sata_oob - 124 sata - 125 hda - 127 se - 128 hda2hdmi - 129 sata_cold - - 160 uartb - 161 vfir - 162 spdif_in - 163 spdif_out - 164 vi - 165 vi_sensor - 166 fuse - 167 fuse_burn - 168 cve - 169 tvo - - 170 clk_32k - 171 clk_m - 172 clk_m_div2 - 173 clk_m_div4 - 174 pll_ref - 175 pll_c - 176 pll_c_out1 - 177 pll_m - 178 pll_m_out1 - 179 pll_p - 180 pll_p_out1 - 181 pll_p_out2 - 182 pll_p_out3 - 183 pll_p_out4 - 184 pll_a - 185 pll_a_out0 - 186 pll_d - 187 pll_d_out0 - 188 pll_d2 - 189 pll_d2_out0 - 190 pll_u - 191 pll_x - 192 pll_x_out0 - 193 pll_e - 194 spdif_in_sync - 195 i2s0_sync - 196 i2s1_sync - 197 i2s2_sync - 198 i2s3_sync - 199 i2s4_sync - 200 vimclk - 201 audio0 - 202 audio1 - 203 audio2 - 204 audio3 - 205 audio4 - 206 audio5 - 207 clk_out_1 (extern1) - 208 clk_out_2 (extern2) - 209 clk_out_3 (extern3) - 210 sclk - 211 blink - 212 cclk_g - 213 cclk_lp - 214 twd - 215 cml0 - 216 cml1 - 217 hclk - 218 pclk + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + <dt-bindings/clock/tegra30-car.h>. Example SoC include file: @@ -229,7 +26,7 @@ Example SoC include file: }; usb@c5004000 { - clocks = <&tegra_car 58>; /* usb2 */ + clocks = <&tegra_car TEGRA30_CLK_USB2>; }; }; diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt new file mode 100644 index 000000000000..7fc09773de46 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt @@ -0,0 +1,104 @@ +ST Microelectronics Nomadik SRC System Reset and Control + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The Nomadik SRC controller is responsible of controlling chrystals, +PLLs and clock gates. + +Required properties for the SRC node: +- compatible: must be "stericsson,nomadik-src" +- reg: must contain the SRC register base and size + +Optional properties for the SRC node: +- disable-sxtalo: if present this will disable the SXTALO + i.e. the driver output for the slow 32kHz chrystal, if the + board has its own circuitry for providing this oscillator +- disable-mxtal: if present this will disable the MXTALO, + i.e. the driver output for the main (~19.2 MHz) chrystal, + if the board has its own circuitry for providing this + osciallator + + +PLL nodes: these nodes represent the two PLLs on the system, +which should both have the main chrystal, represented as a +fixed frequency clock, as parent. + +Required properties for the two PLL nodes: +- compatible: must be "st,nomadik-pll-clock" +- clock-cells: must be 0 +- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively +- clocks: this clock will have main chrystal as parent + + +HCLK nodes: these represent the clock gates on individual +lines from the HCLK clock tree and the gate for individual +lines from the PCLK clock tree. + +Requires properties for the HCLK nodes: +- compatible: must be "st,nomadik-hclk-clock" +- clock-cells: must be 0 +- clock-id: must be the clock ID from 0 to 63 according to + this table: + + 0: HCLKDMA0 + 1: HCLKSMC + 2: HCLKSDRAM + 3: HCLKDMA1 + 4: HCLKCLCD + 5: PCLKIRDA + 6: PCLKSSP + 7: PCLKUART0 + 8: PCLKSDI + 9: PCLKI2C0 + 10: PCLKI2C1 + 11: PCLKUART1 + 12: PCLMSP0 + 13: HCLKUSB + 14: HCLKDIF + 15: HCLKSAA + 16: HCLKSVA + 17: PCLKHSI + 18: PCLKXTI + 19: PCLKUART2 + 20: PCLKMSP1 + 21: PCLKMSP2 + 22: PCLKOWM + 23: HCLKHPI + 24: PCLKSKE + 25: PCLKHSEM + 26: HCLK3D + 27: HCLKHASH + 28: HCLKCRYP + 29: PCLKMSHC + 30: HCLKUSBM + 31: HCLKRNG + (32, 33, 34, 35 RESERVED) + 36: CLDCLK + 37: IRDACLK + 38: SSPICLK + 39: UART0CLK + 40: SDICLK + 41: I2C0CLK + 42: I2C1CLK + 43: UART1CLK + 44: MSPCLK0 + 45: USBCLK + 46: DIFCLK + 47: IPI2CCLK + 48: IPBMCCLK + 49: HSICLKRX + 50: HSICLKTX + 51: UART2CLK + 52: MSPCLK1 + 53: MSPCLK2 + 54: OWMCLK + (55 RESERVED) + 56: SKECLK + (57 RESERVED) + 58: 3DCLK + 59: PCLKMSP3 + 60: MSPCLK3 + 61: MSHCCLK + 62: USBMCLK + 63: RNGCCLK diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt new file mode 100644 index 000000000000..c80863d344ac --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -0,0 +1,26 @@ +* Clock bindings for Freescale Vybrid VF610 SOC + +Required properties: +- compatible: Should be "fsl,vf610-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h +for the full list of VF610 clock IDs. + +Examples: + +clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; +}; + +uart1: serial@40028000 { + compatible = "fsl,vf610-uart"; + reg = <0x40028000 0x1000>; + interrupts = <0 62 0x04>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; +}; diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index 23ae1db1bc13..d99af878f5d7 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -6,50 +6,99 @@ The purpose of this document is to document their usage. See clock_bindings.txt for more information on the generic clock bindings. See Chapter 25 of Zynq TRM for more information about Zynq clocks. -== PLLs == - -Used to describe the ARM_PLL, DDR_PLL, and IO_PLL. +== Clock Controller == +The clock controller is a logical abstraction of Zynq's clock tree. It reads +required input clock frequencies from the devicetree and acts as clock provider +for all clock consumers of PS clocks. Required properties: -- #clock-cells : shall be 0 (only one clock is output from this node) -- compatible : "xlnx,zynq-pll" -- reg : pair of u32 values, which are the address offsets within the SLCR - of the relevant PLL_CTRL register and PLL_CFG register respectively -- clocks : phandle for parent clock. should be the phandle for ps_clk + - #clock-cells : Must be 1 + - compatible : "xlnx,ps7-clkc" + - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ + (usually 33 MHz oscillators are used for Zynq platforms) + - clock-output-names : List of strings used to name the clock outputs. Shall be + a list of the outputs given below. Optional properties: -- clock-output-names : name of the output clock - -Example: - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - -== Peripheral clocks == + - clocks : as described in the clock bindings + - clock-names : as described in the clock bindings -Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks. +Clock inputs: +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source. + - swdt_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - mio_clk_XX # with XX = 00..53 +... -Required properties: -- #clock-cells : shall be 1 -- compatible : "xlnx,zynq-periph-clock" -- reg : a single u32 value, describing the offset within the SLCR where - the CLK_CTRL register is found for this peripheral -- clocks : phandle for parent clocks. should hold phandles for - the IO_PLL, ARM_PLL, and DDR_PLL in order -- clock-output-names : names of the output clock(s). For peripherals that have - two output clocks (for example, the UART), two clocks - should be listed. +Clock outputs: + 0: armpll + 1: ddrpll + 2: iopll + 3: cpu_6or4x + 4: cpu_3or2x + 5: cpu_2x + 6: cpu_1x + 7: ddr2x + 8: ddr3x + 9: dci + 10: lqspi + 11: smc + 12: pcap + 13: gem0 + 14: gem1 + 15: fclk0 + 16: fclk1 + 17: fclk2 + 18: fclk3 + 19: can0 + 20: can1 + 21: sdio0 + 22: sdio1 + 23: uart0 + 24: uart1 + 25: spi0 + 26: spi1 + 27: dma + 28: usb0_aper + 29: usb1_aper + 30: gem0_aper + 31: gem1_aper + 32: sdio0_aper + 33: sdio1_aper + 34: spi0_aper + 35: spi1_aper + 36: can0_aper + 37: can1_aper + 38: i2c0_aper + 39: i2c1_aper + 40: uart0_aper + 41: uart1_aper + 42: gpio_aper + 43: lqspi_aper + 44: smc_aper + 45: swdt + 46: dbg_trc + 47: dbg_apb Example: - uart_clk: uart_clk { + clkc: clkc { #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + # optional props + clocks = <&clkc 16>, <&clk_foo>; + clock-names = "gem1_emio_clk", "can_mio_clk_23"; }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index c3a14e0ad0ad..cd9e90c5d171 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -120,7 +120,7 @@ ab8500 { "USB_LINK_STATUS", "USB_ADP_PROBE_PLUG", "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index bcfdab5d442e..3a7caf7a744a 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -58,7 +58,7 @@ Some requirements for using fsl,imx-pinctrl binding: Examples: usdhc@0219c000 { /* uSDHC4 */ - fsl,card-wired; + non-removable; vmmc-supply = <®_3p3v>; status = "okay"; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 2a3feabd3b22..34c1505774bf 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -1,7 +1,7 @@ Atmel AT91RM9200 Real Time Clock Required properties: -- compatible: should be: "atmel,at91rm9200-rtc" +- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt index 34c952883276..df0933043a5b 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt @@ -6,27 +6,10 @@ Practice : Universal Serial Bus" with the following modifications and additions : Required properties : - - compatible : Should be "nvidia,tegra20-ehci" for USB controllers - used in host mode. - - phy_type : Should be one of "ulpi" or "utmi". - - nvidia,vbus-gpio : If present, specifies a gpio that needs to be - activated for the bus to be powered. - - nvidia,phy : phandle of the PHY instance, the controller is connected to. - -Required properties for phy_type == ulpi: - - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. + - compatible : Should be "nvidia,tegra20-ehci". + - nvidia,phy : phandle of the PHY that the controller is connected to. + - clocks : Contains a single entry which defines the USB controller's clock. Optional properties: - - dr_mode : dual role mode. Indicates the working mode for - nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral", - or "otg". Default to "host" if not defined for backward compatibility. - host means this is a host controller - peripheral means it is device controller - otg means it can operate as either ("on the go") - - nvidia,has-legacy-mode : boolean indicates whether this controller can - operate in legacy mode (as APX 2500 / 2600). In legacy mode some - registers are accessed through the APB_MISC base address instead of - the USB controller. Since this is a legacy issue it probably does not - warrant a compatible string of its own. - - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2 - USB ports, which need reset twice due to hardware issues. + - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 + USB ports, which need reset twice due to hardware issues. diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt index 6bdaba2f0aa1..c4c9e9e664aa 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt @@ -4,14 +4,49 @@ The device node for Tegra SOC USB PHY: Required properties : - compatible : Should be "nvidia,tegra20-usb-phy". - - reg : Address and length of the register set for the USB PHY interface. - - phy_type : Should be one of "ulpi" or "utmi". + - reg : Defines the following set of registers, in the order listed: + - The PHY's own register set. + Always present. + - The register set of the PHY containing the UTMI pad control registers. + Present if-and-only-if phy_type == utmi. + - phy_type : Should be one of "utmi", "ulpi" or "hsic". + - clocks : Defines the clocks listed in the clock-names property. + - clock-names : The following clock names must be present: + - reg: The clock needed to access the PHY's own registers. This is the + associated EHCI controller's clock. Always present. + - pll_u: PLL_U. Always present. + - timer: The timeout clock (clk_m). Present if phy_type == utmi. + - utmi-pads: The clock needed to access the UTMI pad control registers. + Present if phy_type == utmi. + - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2). + Present if phy_type == ulpi, and ULPI link mode is in use. Required properties for phy_type == ulpi: - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. +Required PHY timing params for utmi phy: + - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before + start of sync launches RxActive + - nvidia,elastic-limit : Variable FIFO Depth of elastic input store + - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait + before declare IDLE. + - nvidia,term-range-adj : Range adjusment on terminations + - nvidia,xcvr-setup : HS driver output control + - nvidia,xcvr-lsfslew : LS falling slew rate control. + - nvidia,xcvr-lsrslew : LS rising slew rate control. + Optional properties: - nvidia,has-legacy-mode : boolean indicates whether this controller can operate in legacy mode (as APX 2500 / 2600). In legacy mode some registers are accessed through the APB_MISC base address instead of - the USB controller.
\ No newline at end of file + the USB controller. + - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power + optimizations for the devices that are always connected. e.g. modem. + - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be + "host", "peripheral", or "otg". Defaults to "host" if not defined. + host means this is a host controller + peripheral means it is device controller + otg means it can operate as either ("on the go") + +Required properties for dr_mode == otg: + - vbus-supply: regulator for VBUS diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 6e3b18a8afc6..2fe6e767b3d6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3351,9 +3351,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. plus one apbt timer for broadcast timer. x86_mrst_timer=apbt_only | lapic_and_apbt - xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. - xd_geo= See header of drivers/block/xd.c. - xen_emul_unplug= [HW,X86,XEN] Unplug Xen emulated devices Format: [unplug0,][unplug1] diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 97d45f276fe6..eaf32a1fd0b1 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -80,8 +80,6 @@ Valid names are: /dev/sdd: -> 0x0830 (forth SCSI disk) /dev/sde: -> 0x0840 (fifth SCSI disk) /dev/fd : -> 0x0200 (floppy disk) - /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k) - /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k) The name must be followed by a decimal number, that stands for the partition number. Internally, the value of the number is just diff --git a/MAINTAINERS b/MAINTAINERS index 250dc970c62d..5be702cc8449 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5766,7 +5766,7 @@ M: Matthew Wilcox <willy@linux.intel.com> L: linux-nvme@lists.infradead.org T: git git://git.infradead.org/users/willy/linux-nvme.git S: Supported -F: drivers/block/nvme.c +F: drivers/block/nvme* F: include/linux/nvme.h OMAP SUPPORT @@ -7624,7 +7624,7 @@ F: drivers/clk/spear/ SPI SUBSYSTEM M: Mark Brown <broonie@kernel.org> M: Grant Likely <grant.likely@linaro.org> -L: spi-devel-general@lists.sourceforge.net +L: linux-spi@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git Q: http://patchwork.kernel.org/project/spi-devel-general/list/ S: Maintained @@ -9004,7 +9004,7 @@ S: Maintained F: drivers/net/wireless/wl3501* WM97XX TOUCHSCREEN DRIVERS -M: Mark Brown <broonie@opensource.wolfsonmicro.com> +M: Mark Brown <broonie@kernel.org> M: Liam Girdwood <lrg@slimlogic.co.uk> L: linux-input@vger.kernel.org T: git git://opensource.wolfsonmicro.com/linux-2.6-touch @@ -9014,7 +9014,6 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS DRIVERS -M: Mark Brown <broonie@opensource.wolfsonmicro.com> L: patches@opensource.wolfsonmicro.com T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Unicycling Gorilla # *DOCUMENTATION* diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1d41908d5cda..29f7623553c1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -251,6 +251,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q/DL. + config DEBUG_IMX6SL_UART + bool "i.MX6SL Debug UART" + depends on SOC_IMX6SL + help + Say Y here if you want kernel low-level debugging support + on i.MX6SL. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -532,7 +539,8 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ - DEBUG_IMX6Q_UART + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART default 1 depends on ARCH_MXC help @@ -631,7 +639,8 @@ config DEBUG_LL_INCLUDE DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ - DEBUG_IMX6Q_UART + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3580d57ea218..79e9bdbfc491 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) -asflags-y := -Wa,-march=all -DZIMAGE +asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S index 6e8382d5b7a4..5392ee63338f 100644 --- a/arch/arm/boot/compressed/debug.S +++ b/arch/arm/boot/compressed/debug.S @@ -1,6 +1,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#ifndef CONFIG_DEBUG_SEMIHOSTING + #include CONFIG_DEBUG_LL_INCLUDE ENTRY(putc) @@ -10,3 +12,29 @@ ENTRY(putc) busyuart r3, r1 mov pc, lr ENDPROC(putc) + +#else + +ENTRY(putc) + adr r1, 1f + ldmia r1, {r2, r3} + add r2, r2, r1 + ldr r1, [r2, r3] + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr + .align 2 +1: .word _GLOBAL_OFFSET_TABLE_ - . + .word semi_writec_buf(GOT) +ENDPROC(putc) + + .bss + .global semi_writec_buf + .type semi_writec_buf, %object +semi_writec_buf: + .space 4 + .size semi_writec_buf, 4 + +#endif diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 6179d94dd5c6..3115e313d9f6 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -11,6 +11,7 @@ #include <asm/mach-types.h> .section ".start", "ax" + .arch armv4 __SA1100_start: diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 089c560e07f1..92b56897ed64 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -18,6 +18,7 @@ .section ".start", "ax" + .arch armv4 b __beginning __ofw_data: .long 0 @ the number of memory blocks diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fe4d9c3ad761..032a8d987148 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -11,6 +11,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> + .arch armv7-a /* * Debugging stuff * @@ -805,8 +806,8 @@ call_cache_fn: adr r12, proc_types .align 2 .type proc_types,#object proc_types: - .word 0x00000000 @ old ARM ID - .word 0x0000f000 + .word 0x41000000 @ old ARM ID + .word 0xff00f000 mov pc, lr THUMB( nop ) mov pc, lr diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a89..242a4937fe6f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -16,11 +16,13 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb # sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb # sam9g45 dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb @@ -84,6 +86,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ @@ -103,13 +107,15 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ imx27-pdk.dtb \ - imx27-phytec-phycore.dtb \ + imx27-phytec-phycore-som.dtb \ + imx27-phytec-phycore-rdk.dtb \ imx31-bug.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ + imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ @@ -117,10 +123,13 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ + imx6q-phytec-pbab01.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ - imx6q-sbc6x.dtb + imx6q-sbc6x.dtb \ + imx6sl-evk.dtb \ + vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ @@ -130,6 +139,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10036.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ + imx28-cfa10055.dtb \ + imx28-cfa10057.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ @@ -158,10 +169,13 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ hrefprev60.dtb \ hrefv60plus.dtb \ + ccu8540.dtb \ ccu9540.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ + r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen-reference.dtb \ r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ @@ -181,6 +195,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ + sun5i-a10s-olinuxino-micro.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -207,8 +222,11 @@ dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ + wm8750-apc8750.dtb \ wm8850-w70v2.dtb -dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ + zynq-zc706.dtb \ + zynq-zed.dtb targets += dtbs targets += $(dtb-y) diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 29b9f15e7599..54cb5cf8604a 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { chosen { @@ -46,7 +46,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 15 0>; + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -90,23 +90,23 @@ compatible = "gpio-leds"; red { - gpios = <&pioC 10 0>; + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; green { - gpios = <&pioA 5 1>; + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; yellow { - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; blue { - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b88adf..27c99c106620 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -26,8 +26,12 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; /* * To consider voltage drop between PMIC and SoC, @@ -409,8 +413,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - num-cs = <7>; - num-waitpins = <2>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 5160210f74da..3a1de9eb5111 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Somfy Animeo IP"; @@ -123,7 +123,7 @@ usb0: ohci@00500000 { num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 1>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -133,23 +133,23 @@ power_green { label = "power_green"; - gpios = <&pioC 17 0>; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; power_red { label = "power_red"; - gpios = <&pioA 2 0>; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; tx_green { label = "tx_green"; - gpios = <&pioC 19 0>; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; tx_red { label = "tx_red"; - gpios = <&pioC 18 0>; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; }; @@ -160,21 +160,21 @@ keyswitch_in { label = "keyswitch_in"; - gpios = <&pioB 1 0>; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; gpio-key,wakeup; }; error_in { label = "error_in"; - gpios = <&pioB 2 0>; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; gpio-key,wakeup; }; btn { label = "btn"; - gpios = <&pioC 23 0>; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 2353b1f13704..beee1699d49e 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -74,6 +74,7 @@ */ status = "disabled"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 14e36e19d515..45b107763e3b 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -99,6 +99,7 @@ * No CD or WP GPIOs: SDIO interface used for * Wifi/Bluetooth chip */ + broken-cd; }; usb@50000 { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 130f8390a7e4..89c21106cfa9 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,6 +64,7 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 550eb772c30e..a679b6697a98 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -22,9 +22,18 @@ model = "Marvell Armada 370 and XP SoC"; compatible = "marvell,armada-370-xp"; + aliases { + eth0 = ð0; + eth1 = ð1; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "marvell,sheeva-v7"; + device_type = "cpu"; + reg = <0>; }; }; @@ -94,7 +103,7 @@ reg = <0x72004 0x4>; }; - ethernet@70000 { + eth0: ethernet@70000 { compatible = "marvell,armada-370-neta"; reg = <0x70000 0x2500>; interrupts = <8>; @@ -102,7 +111,7 @@ status = "disabled"; }; - ethernet@74000 { + eth1: ethernet@74000 { compatible = "marvell,armada-370-neta"; reg = <0x74000 0x2500>; interrupts = <10>; @@ -143,6 +152,10 @@ reg = <0xd4000 0x200>; interrupts = <54>; clocks = <&gateclk 17>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index aee2b1866ce2..fa3dfc6b4c6a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -180,10 +180,6 @@ bus-range = <0x00 0xff>; - reg = <0x40000 0x2000>, <0x80000 0x2000>; - - reg-names = "pcie0.0", "pcie1.0"; - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index d6cc8bf8272e..e28e68ff864d 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -30,6 +30,10 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ + internal-regs { serial@12000 { clock-frequency = <250000000>; @@ -97,6 +101,7 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { @@ -155,6 +160,35 @@ status = "okay"; }; }; + + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 3ee63d128e27..c87b2de29c30 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,8 +39,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x1000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; internal-regs { serial@12000 { @@ -104,6 +105,16 @@ phy-mode = "rgmii-id"; }; + /* Front-side USB slot */ + usb@50000 { + status = "okay"; + }; + + /* Back-side USB slot */ + usb@51000 { + status = "okay"; + }; + spi0: spi@10600 { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6ab56bd35de9..386f0ce48453 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; @@ -105,7 +106,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x2500>; interrupts = <14>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 46b785064dd8..8f510458ea86 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,8 +27,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x8000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; internal-regs { serial@12000 { @@ -137,13 +138,22 @@ nr-ports = <2>; status = "okay"; }; + + /* Front side USB 0 */ usb@50000 { status = "okay"; }; + + /* Front side USB 1 */ usb@51000 { status = "okay"; }; + /* USB interface in the mini-PCIe connector */ + usb@52000 { + status = "okay"; + }; + devbus-bootcs@10400 { status = "okay"; ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5b902f9a3af2..e481d54b565c 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -22,6 +22,10 @@ model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + aliases { + eth2 = ð2; + }; + soc { internal-regs { L2: l2-cache { @@ -86,7 +90,7 @@ reg = <0x18200 0x500>; }; - ethernet@30000 { + eth2: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x2500>; interrupts = <12>; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index c7aebba4e8e7..cce45f5177f9 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" +#include "at91sam9g25.dtsi" / { model = "Acme Systems Aria G25"; @@ -21,6 +21,7 @@ serial3 = &usart2; serial4 = &usart3; serial5 = &uart0; + serial6 = &uart1; }; chosen { @@ -112,13 +113,17 @@ status = "okay"; }; + /* + * UART0/1 pins are marked as GPIO on + * Aria documentation. + * Change to "okay" if you need additional serial ports + */ uart0: serial@f8040000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf8040000 0x200>; - interrupts = <15 4 5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; + status = "disabled"; + }; + + uart1: serial@f8044000 { + status = "disabled"; }; adc0: adc@f804c000 { @@ -138,6 +143,10 @@ }; }; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; usb0: ohci@00600000 { @@ -156,7 +165,7 @@ /* little green LED in middle of Aria G25 module */ aria_led { label = "aria_led"; - gpios = <&pioB 8 0>; /* PB8 */ + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ linux,default-trigger = "heartbeat"; }; @@ -164,7 +173,7 @@ onewire@0 { compatible = "w1-gpio"; - gpios = <&pioA 21 1>; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_w1_0>; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts new file mode 100644 index 000000000000..cbe967343997 --- /dev/null +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -0,0 +1,157 @@ +/* + * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board + * + * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) + * + * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Acme Systems FoxG20"; + compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + >; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + + uart0: serial@fffd4000 { + status = "okay"; + }; + + uart1: serial@fffd8000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */ + }; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + i2c-gpio,delay-us = <5>; /* ~85 kHz */ + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + /* red LED marked "PC7" near mini USB (device) receptacle */ + user_led { + label = "user_led"; + gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn { + label = "Button"; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 5d3ed5aafc69..34c03806fe06 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -10,7 +10,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -35,8 +38,12 @@ ssc2 = &ssc2; }; cpus { - cpu@0 { + #address-cells = <0>; + #size-cells = <0>; + + cpu { compatible = "arm,arm920t"; + device_type = "cpu"; }; }; @@ -77,25 +84,29 @@ st: timer@fffffd00 { compatible = "atmel,at91rm9200-st"; reg = <0xfffffd00 0x100>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffa4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa4000 0x100>; - interrupts = <20 4 0 21 4 0 22 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 + 21 IRQ_TYPE_LEVEL_HIGH 0 + 22 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@fffb8000 { compatible = "atmel,at91rm9200-i2c"; reg = <0xfffb8000 0x4000>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; #address-cells = <1>; @@ -106,7 +117,7 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -115,7 +126,7 @@ ssc0: ssc@fffd0000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd0000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disable"; @@ -124,7 +135,7 @@ ssc1: ssc@fffd4000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd4000 0x4000>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disable"; @@ -133,7 +144,7 @@ ssc2: ssc@fffd8000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd8000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; status = "disable"; @@ -142,7 +153,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at91rm9200-emac", "cdns,emac"; reg = <0xfffbc000 0x4000>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; @@ -167,234 +178,310 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A */ - 0 31 0x1 0x1>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = - <0 20 0x1 0x0>; /* PA20 periph A */ + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = - <0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 20 0x1 0x1 /* PB20 periph A with pullup */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; pinctrl_uart1_rts: uart1_rts-0 { atmel,pins = - <1 24 0x1 0x0>; /* PB24 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */ }; pinctrl_uart1_cts: uart1_cts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; pinctrl_uart1_dcd: uart1_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_uart1_ri: uart1_ri-0 { atmel,pins = - <1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; }; uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <0 22 0x1 0x0 /* PA22 periph A */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 31 0x2 0x0>; /* PA31 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */ }; }; uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 6 0x2 0x0>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ }; pinctrl_uart3_rts: uart3_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart3_cts: uart3_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ - 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */ + AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 7 0x1 0x0 /* PA7 periph A */ - 0 8 0x1 0x0 /* PA8 periph A */ - 0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0>; /* PA16 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <1 12 0x2 0x0 /* PB12 periph B */ - 1 13 0x2 0x0 /* PB13 periph B */ - 1 14 0x2 0x0 /* PB14 periph B */ - 1 15 0x2 0x0 /* PB15 periph B */ - 1 16 0x2 0x0 /* PB16 periph B */ - 1 17 0x2 0x0 /* PB17 periph B */ - 1 18 0x2 0x0 /* PB18 periph B */ - 1 19 0x2 0x0>; /* PB19 periph B */ + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */ + AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */ + AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */ + AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */ + AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */ + AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */ + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <1 3 0x2 0x1 /* PB3 periph B with pullup */ - 1 4 0x2 0x1 /* PB4 periph B with pullup */ - 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 8 0x2 0x1 /* PA8 periph B with pullup */ - 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 10 0x2 0x1 /* PA10 periph B with pullup */ - 0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0>; /* PB2 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; ssc2 { pinctrl_ssc2_tx: ssc2_tx-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0>; /* PB14 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */ }; pinctrl_ssc2_rx: ssc2_rx-0 { atmel,pins = - <1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; twi { pinctrl_twi: twi-0 { atmel,pins = - <0 25 0x1 0x2 /* PA25 periph A with multi drive */ - 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */ }; pinctrl_twi_gpio: twi_gpio-0 { atmel,pins = - <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ - 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */ + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -404,7 +491,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -414,7 +501,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +511,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -435,7 +522,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -444,7 +531,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -455,7 +542,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -466,7 +553,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -477,7 +564,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -488,7 +575,7 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; - interrupts = <11 4 2>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; @@ -503,9 +590,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; nand-ecc-mode = "soft"; - gpios = <&pioC 2 0 + gpios = <&pioC 2 GPIO_ACTIVE_HIGH 0 - &pioB 1 0 + &pioB 1 GPIO_ACTIVE_HIGH >; status = "disabled"; }; @@ -513,15 +600,15 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; - interrupts = <23 4 2>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ + &pioA 26 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e586d85f8e23..14058125d123 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; @@ -50,7 +50,7 @@ }; usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 0>; + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -66,19 +66,19 @@ ds2 { label = "green"; - gpios = <&pioB 0 0x1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; - gpios = <&pioB 1 0x1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; - gpios = <&pioB 2 0x1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 84c4bef2d726..c7ccbcbffb3e 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -32,8 +35,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -84,19 +91,23 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 0 27 4 0 28 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 + 27 IRQ_TYPE_LEVEL_HIGH 0 + 28 IRQ_TYPE_LEVEL_HIGH 0>; }; pinctrl@fffff400 { @@ -116,234 +127,318 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 27 0x1 0x0>; /* PB27 periph A */ + <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */ }; pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A */ - 1 22 0x1 0x0>; /* PB22 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */ }; pinctrl_usart0_dcd: usart0_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_usart0_ri: usart0_ri-0 { atmel,pins = - <1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <1 28 0x1 0x0>; /* PB28 periph A */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <1 29 0x1 0x0>; /* PB29 periph A */ + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 8 0x1 0x1 /* PB8 periph A with pullup */ - 1 9 0x1 0x0>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 10 0x1 0x1 /* PB10 periph A with pullup */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 8 0x2 0x0>; /* PC8 periph B */ + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 10 0x2 0x0>; /* PC10 periph B */ + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 31 0x2 0x1 /* PA31 periph B with pullup */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 12 0x1 0x1 /* PB12 periph A with pullup */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0 /* PA19 periph A */ - 0 20 0x1 0x0 /* PA20 periph A */ - 0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 22 0x2 0x0 /* PA22 periph B */ - 0 23 0x2 0x0 /* PA23 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { atmel,pins = - <0 10 0x2 0x0 /* PA10 periph B */ - 0 11 0x2 0x0 /* PA11 periph B */ - 0 22 0x2 0x0 /* PA22 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 1 0x2 0x1 /* PA1 periph B with pullup */ - 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */ + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 4 0x2 0x1 /* PA4 periph B with pullup */ - 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0 /* PB17 periph A */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 20 0x1 0x0 /* PB20 periph A */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ - 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ - 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE + AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -353,7 +448,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -363,7 +458,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +469,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -383,7 +478,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -394,7 +489,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -405,7 +500,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -416,7 +511,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -427,7 +522,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4 5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -438,7 +533,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4 5>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -449,7 +544,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -458,14 +553,14 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4 2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fffac000 { compatible = "atmel,at91sam9260-i2c"; reg = <0xfffac000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,7 +569,7 @@ mmc0: mmc@fffa8000 { compatible = "atmel,hsmci"; reg = <0xfffa8000 0x600>; - interrupts = <9 4 0>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -483,7 +578,7 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -494,7 +589,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffc8000 0x200>; - interrupts = <12 4 3>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -505,7 +600,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffcc000 0x200>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -514,7 +609,7 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -567,8 +662,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 0 - &pioC 14 0 + gpios = <&pioC 13 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -577,21 +672,23 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4 2>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 94b58ab2cc08..d5bd65f74602 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -6,7 +6,10 @@ * Licensed under GPLv2 only. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -29,8 +32,12 @@ ssc1 = &ssc1; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -72,13 +79,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; }; rstc@fffffd00 { @@ -110,221 +117,259 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <2 30 0x1 0x0 /* PC30 periph A */ - 2 31 0x1 0x1>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 26 0x1 0x1 /* PA26 periph A with pullup */ - 0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 28 0x1 0x0>; /* PA28 periph A */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 29 0x1 0x0>; /* PA29 periph A */ + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <3 0 0x1 0x1 /* PD0 periph A with pullup */ - 3 1 0x1 0x0>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 7 0x2 0x0>; /* PD7 periph B */ + <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PD8 periph B */ + <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A with pullup */ - 3 3 0x1 0x0>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <3 5 0x2 0x0>; /* PD5 periph B */ + <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <4 6 0x2 0x0>; /* PD6 periph B */ + <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ - 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ + AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <2 25 0x2 0x0 /* PC25 periph B */ - 4 21 0x1 0x0 /* PE21 periph A */ - 4 23 0x1 0x0 /* PE23 periph A */ - 4 24 0x1 0x0 /* PE24 periph A */ - 4 25 0x1 0x0 /* PE25 periph A */ - 4 26 0x1 0x0 /* PE26 periph A */ - 4 27 0x1 0x0 /* PE27 periph A */ - 4 28 0x1 0x0 /* PE28 periph A */ - 4 29 0x1 0x0 /* PE29 periph A */ - 4 30 0x1 0x0>; /* PE30 periph A */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 22 0x2 0x0 /* PC22 periph B */ - 2 23 0x2 0x0 /* PC23 periph B */ - 2 24 0x2 0x0 /* PC24 periph B */ - 2 25 0x2 0x0 /* PC25 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 4 22 0x2 0x0>; /* PE22 periph B */ + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ + AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ + AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 12 0x1 0x0>; /* PA12 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_clk: mmc1_clk-0 { atmel,pins = - <0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { atmel,pins = - <0 21 0x1 0x1 /* PA21 periph A with pullup */ - 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ }; pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { atmel,pins = - <0 23 0x1 0x1 /* PA23 periph A with pullup */ - 0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x2 0x0 /* PB0 periph B */ - 1 1 0x2 0x0 /* PB1 periph B */ - 1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ + AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ + AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x2 0x0 /* PB3 periph B */ - 1 4 0x2 0x0 /* PB4 periph B */ - 1 5 0x2 0x0>; /* PB5 periph B */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ - 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ - 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ - 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ - 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -334,7 +379,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -344,7 +389,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +399,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +409,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -375,7 +420,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -384,7 +429,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -395,7 +440,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -406,7 +451,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -417,7 +462,7 @@ ssc0: ssc@fff98000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -426,7 +471,7 @@ ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -435,7 +480,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -444,14 +489,14 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4 2>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fff88000 { compatible = "atmel,at91sam9263-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -460,7 +505,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,7 +514,7 @@ mmc1: mmc@fff84000 { compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -486,7 +531,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -497,7 +542,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -515,8 +560,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 0 - &pioD 15 0 + gpios = <&pioA 22 GPIO_ACTIVE_HIGH + &pioD 15 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -525,15 +570,15 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4 2>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 3b82d91e7fcc..70f835b55c0b 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Atmel at91sam9263ek"; @@ -51,7 +51,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 0>; + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -65,8 +65,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioE 18 0>; - wp-gpios = <&pioE 19 0>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; }; }; @@ -74,8 +74,8 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ - 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ + AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ }; }; }; @@ -89,6 +89,10 @@ reg = <0>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -141,8 +145,8 @@ usb0: ohci@00a00000 { num-ports = <2>; status = "okay"; - atmel,vbus-gpio = <&pioA 24 0 - &pioA 21 0 + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH >; }; }; @@ -152,13 +156,13 @@ d3 { label = "d3"; - gpios = <&pioB 7 0>; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d2 { label = "d2"; - gpios = <&pioC 29 1>; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; }; @@ -168,14 +172,14 @@ left_click { label = "left_click"; - gpios = <&pioC 5 1>; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioC 4 1>; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 28467fd6bf96..cfd7044616d7 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 5427b2dba87e..26b0444b0f96 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g15.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g15.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 75ce6e760016..b8e79466014f 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index e5324bf9d529..bbfd753112c9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek"; @@ -17,13 +17,13 @@ ds1 { label = "ds1"; - gpios = <&pioA 9 0>; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioA 6 1>; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index 66467b113126..bdb799bad179 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek 2 mmc"; @@ -23,7 +23,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioC 2 0>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; }; }; @@ -31,7 +31,7 @@ mmc0_slot0 { pinctrl_board_mmc0_slot0: mmc0_slot0-board { atmel,pins = - <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */ }; }; }; @@ -43,13 +43,13 @@ ds1 { label = "ds1"; - gpios = <&pioB 9 0>; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioB 8 1>; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6a92c5baef8c..137354689ad0 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,7 +5,7 @@ * * Licensed under GPLv2. */ -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -34,10 +34,17 @@ board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ }; }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; }; dbgu: serial@fffff200 { @@ -65,7 +72,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,16 +86,7 @@ slot@1 { reg = <1>; bus-width = <4>; - cd-gpios = <&pioC 9 0>; - }; - }; - - pinctrl@fffff400 { - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ - }; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; }; }; @@ -106,6 +104,10 @@ reg = <1>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -180,14 +182,14 @@ btn3 { label = "Button 3"; - gpios = <&pioA 30 1>; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { label = "Button 4"; - gpios = <&pioA 31 1>; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 5fd32df03f25..b4ec6fe53fc7 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a1c511fecdc1..1e4c49c584d3 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index d6fa8af50724..bebf9f55614b 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 6f58ab8d21f5..641a9bf89ed1 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G35-EK"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bf18a735c37d..c3e514837074 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -9,7 +9,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -35,8 +39,12 @@ ssc1 = &ssc1; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -83,7 +91,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -95,19 +103,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -130,221 +138,297 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 19 0x1 0x1 /* PB19 periph A with pullup */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 17 0x2 0x0>; /* PB17 periph B */ + <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 15 0x2 0x0>; /* PB15 periph B */ + <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ }; }; uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 4 0x1 0x1 /* PB4 periph A with pullup */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 16 0x1 0x0>; /* PD16 periph A */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 17 0x1 0x0>; /* PD17 periph A */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <2 9 0x2 0x0>; /* PC9 periph B */ + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <2 11 0x2 0x0>; /* PC11 periph B */ + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 8 0x1 0x1 /* PB9 periph A with pullup */ - 1 9 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <0 23 0x2 0x0>; /* PA23 periph B */ + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <0 24 0x2 0x0>; /* PA24 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0>; /* PA19 periph A */ + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 6 0x2 0x0 /* PA6 periph B */ - 0 7 0x2 0x0 /* PA7 periph B */ - 0 8 0x2 0x0 /* PA8 periph B */ - 0 9 0x2 0x0 /* PA9 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0 /* PA29 periph B */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ + AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A */ - 0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 31 0x1 0x0 /* PA31 periph A */ - 0 22 0x1 0x1 /* PA22 periph A with pullup */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1 /* PA25 periph A with pullup */ - 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = - <0 27 0x1 0x1 /* PA27 periph A with pullup */ - 0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1 /* PA29 periph A with pullup */ - 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A */ - 3 1 0x1 0x0 /* PD1 periph A */ - 3 2 0x1 0x0>; /* PD2 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <3 3 0x1 0x0 /* PD3 periph A */ - 3 4 0x1 0x0 /* PD4 periph A */ - 3 5 0x1 0x0>; /* PD5 periph A */ + <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ + AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A */ - 3 11 0x1 0x0 /* PD11 periph A */ - 3 12 0x1 0x0>; /* PD12 periph A */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <3 13 0x1 0x0 /* PD13 periph A */ - 3 14 0x1 0x0 /* PD14 periph A */ - 3 15 0x1 0x0>; /* PD15 periph A */ + <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ - 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ - 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +438,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +448,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +458,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -384,7 +468,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -395,7 +479,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -404,7 +488,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -415,7 +499,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -426,7 +510,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -437,7 +521,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4 5>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -448,7 +532,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -457,7 +541,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -466,7 +550,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -475,7 +559,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -484,7 +568,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -493,7 +577,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -533,8 +617,8 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 4 0>; - dmas = <&dma 1 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -544,8 +628,8 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 4 0>; - dmas = <&dma 1 13>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -579,6 +663,68 @@ pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + usb2: gadget@fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; }; nand0: nand@40000000 { @@ -592,8 +738,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -602,22 +748,22 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 0 /* sda */ - &pioA 21 0 /* scl */ + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 51d9251b5bbe..a4b00e5c61c0 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Atmel AT91SAM9M10G45-EK"; @@ -59,6 +59,10 @@ status = "okay"; }; + watchdog@fffffd40 { + status = "okay"; + }; + mmc0: mmc@fff80000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -68,7 +72,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 10 0>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +85,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 11 0>; - wp-gpios = <&pioD 29 0>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; }; }; @@ -90,15 +94,15 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ - 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ + AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; }; @@ -112,6 +116,11 @@ reg = <0>; }; }; + + usb2: gadget@fff78000 { + atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; }; nand0: nand@40000000 { @@ -139,8 +148,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 1 - &pioD 3 1>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { @@ -153,19 +162,19 @@ d8 { label = "d8"; - gpios = <&pioD 30 0>; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d6 { label = "d6"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 1>; + gpios = <&pioD 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; }; @@ -175,45 +184,45 @@ left_click { label = "left_click"; - gpios = <&pioB 6 1>; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioB 7 1>; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; left { label = "Joystick Left"; - gpios = <&pioB 14 1>; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; right { label = "Joystick Right"; - gpios = <&pioB 15 1>; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "Joystick Up"; - gpios = <&pioB 16 1>; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; down { label = "Joystick Down"; - gpios = <&pioB 17 1>; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; enter { label = "Joystick Press"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 8d25f889928e..973bf5fd9800 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -7,7 +7,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -31,8 +35,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -78,7 +86,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; shdwc@fffffe10 { @@ -89,8 +97,8 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; - dmas = <&dma 1 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -100,19 +108,19 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -134,159 +142,235 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x0>; /* PA0 periph A */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 7 0x1 0x0>; /* PA7 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC23 periph B with pullup */ - 2 22 0x2 0x0>; /* PC22 periph B */ + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 9 0x3 0x1 /* PC9 periph C with pullup */ - 2 8 0x3 0x0>; /* PC8 periph C */ + <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */ + AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x1 /* PC17 periph C with pullup */ - 2 17 0x3 0x0>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ - 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 13 0x2 0x1 /* PA13 periph B with pullup */ - 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */ + AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -296,7 +380,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -306,7 +390,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -316,7 +400,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -327,7 +411,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -336,7 +420,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -345,7 +429,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -354,7 +438,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -363,7 +447,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -372,7 +456,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -381,9 +465,9 @@ i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; - dmas = <&dma 1 13>, - <&dma 1 14>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma 1 AT91_DMA_CFG_PER_ID(14)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -393,9 +477,9 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; - dmas = <&dma 1 15>, - <&dma 1 16>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>, + <&dma 1 AT91_DMA_CFG_PER_ID(16)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -407,7 +491,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -418,11 +502,17 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -439,8 +529,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -449,15 +539,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d30e48bd1e9d..d59b70c6a6a0 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9n12.dtsi" +#include "at91sam9n12.dtsi" / { model = "Atmel AT91SAM9N12-EK"; @@ -55,7 +55,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioA 7 0>; + cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; }; }; @@ -63,7 +63,7 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; }; @@ -77,6 +77,10 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -95,19 +99,19 @@ d8 { label = "d8"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; d9 { label = "d6"; - gpios = <&pioB 5 1>; + gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { label = "d7"; - gpios = <&pioB 6 0>; + gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -117,7 +121,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 9ac2bc2b4f07..49e94aba938f 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -26,16 +26,16 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 16 0x2 0x0 /* PC16 periph B */ - 2 18 0x2 0x0 /* PC18 periph B */ - 2 19 0x2 0x0 /* PC19 periph B */ - 2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 2 28 0x2 0x0 /* PC28 periph B */ - 2 29 0x2 0x0 /* PC29 periph B */ - 2 30 0x2 0x0 /* PC30 periph B */ - 2 31 0x2 0x0>; /* PC31 periph B */ + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 315250b4995e..494864836e83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X25-EK"; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index ba67d83d17ac..1a3d525a1f5d 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 6ad19a0d5424..343d32818ca3 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X35-EK"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1145ac330fb7..57d45f5bea09 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -9,7 +9,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -33,8 +37,12 @@ ssc0 = &ssc0; }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -85,32 +93,32 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -124,297 +132,373 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; pinctrl_usart3_sck: usart3_sck-0 { atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +508,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; @@ -435,7 +519,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -445,7 +529,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; @@ -457,7 +541,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -466,8 +550,8 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; - dmas = <&dma0 1 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -477,8 +561,8 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; - dmas = <&dma1 1 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; @@ -488,7 +572,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -497,7 +581,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -506,7 +590,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -515,7 +599,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -524,7 +608,7 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; @@ -533,16 +617,16 @@ macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; - dmas = <&dma0 1 7>, - <&dma0 1 8>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -554,9 +638,9 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; - dmas = <&dma1 1 5>, - <&dma1 1 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -568,9 +652,9 @@ i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; - dmas = <&dma0 1 9>, - <&dma0 1 10>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -579,10 +663,28 @@ status = "disabled"; }; + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + uart1: serial@f8044000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8044000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -625,7 +727,10 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -636,16 +741,87 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + usb2: gadget@f803c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00500000 0x80000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; + rtc@fffffeb0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; }; @@ -664,8 +840,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -674,22 +850,22 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -703,8 +879,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -718,8 +894,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 347a74a857f6..4a5ee5cc115a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -28,7 +28,7 @@ pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { - atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ }; }; }; @@ -75,19 +75,19 @@ pb18 { label = "pb18"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; pd21 { label = "pd21"; - gpios = <&pioD 21 0>; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; }; 1wire_cm { compatible = "w1-gpio"; - gpios = <&pioB 18 0>; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; linux,open-drain; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_1wire_cm>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 1fa48d2bfd80..b753855b2058 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "at91sam9x5cm.dtsi" +#include "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; @@ -27,7 +27,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 15 0>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; }; }; @@ -40,7 +40,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 14 0>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; }; }; @@ -52,6 +52,11 @@ status = "okay"; }; + usb2: gadget@f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + i2c0: i2c@f8010000 { status = "okay"; }; @@ -60,14 +65,14 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; @@ -81,13 +86,17 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 + atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index aafda174a605..6e9deb786a7d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -8,6 +8,17 @@ memory { reg = <0 0x10000000>; }; + + leds { + compatible = "gpio-leds"; + + act { + label = "ACT"; + gpios = <&gpio 16 1>; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + }; }; &gpio { diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts new file mode 100644 index 000000000000..48ff03441f5a --- /dev/null +++ b/arch/arm/boot/dts/ccu8540.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2013 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson U8540 platform with Device Tree"; + compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + + memory@0 { + reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; + }; + + soc { + prcmu@80157000 { + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; + }; + + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts index 04305463f00d..ed29ec7288e4 100644 --- a/arch/arm/boot/dts/ccu9540.dts +++ b/arch/arm/boot/dts/ccu9540.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" +#include "dbx5x0.dtsi" / { model = "ST-Ericsson CCU9540 platform with Device Tree"; @@ -20,7 +20,7 @@ reg = <0x00000000 0x20000000>; }; - soc-u9500 { + soc { uart@80120000 { status = "okay"; }; @@ -52,7 +52,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index b6bc4ff17f26..a082f0ba1ddb 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include "skeleton.dtsi" / { - soc-u9500 { + soc { #address-cells = <1>; #size-cells = <1>; compatible = "stericsson,db8500"; @@ -31,33 +32,33 @@ L2: l2-cache { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; - interrupts = <0 13 4>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 7 0x4>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; - interrupts = <1 13 0x304>; + interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ }; rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; - interrupts = <0 18 0x4>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; }; gpio0: gpio@8012e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e000 0x80>; - interrupts = <0 119 0x4>; + interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -70,7 +71,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e080 0x80>; - interrupts = <0 120 0x4>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -83,7 +84,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e000 0x80>; - interrupts = <0 121 0x4>; + interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -96,7 +97,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e080 0x80>; - interrupts = <0 122 0x4>; + interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -109,7 +110,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e100 0x80>; - interrupts = <0 123 0x4>; + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -122,7 +123,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e180 0x80>; - interrupts = <0 124 0x4>; + interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -135,7 +136,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e000 0x80>; - interrupts = <0 125 0x4>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -148,7 +149,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e080 0x80>; - interrupts = <0 126 0x4>; + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -161,7 +162,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; - interrupts = <0 127 0x4>; + interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -171,29 +172,61 @@ }; pinctrl { - compatible = "stericsson,nmk-pinctrl"; + compatible = "stericsson,db8500-pinctrl"; prcm = <&prcmu>; }; - usb@a03e0000 { + usb_per5@a03e0000 { compatible = "stericsson,db8500-musb", "mentor,musb"; reg = <0xa03e0000 0x10000>; - interrupts = <0 23 0x4>; - }; - - dma-controller@801C0000 { - compatible = "stericsson,db8500-dma40", - "stericsson,dma40"; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + + dr_mode = "otg"; + + dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ + <&dma 38 0 0x0>, /* Logical - MemToDev */ + <&dma 37 0 0x2>, /* Logical - DevToMem */ + <&dma 37 0 0x0>, /* Logical - MemToDev */ + <&dma 36 0 0x2>, /* Logical - DevToMem */ + <&dma 36 0 0x0>, /* Logical - MemToDev */ + <&dma 19 0 0x2>, /* Logical - DevToMem */ + <&dma 19 0 0x0>, /* Logical - MemToDev */ + <&dma 18 0 0x2>, /* Logical - DevToMem */ + <&dma 18 0 0x0>, /* Logical - MemToDev */ + <&dma 17 0 0x2>, /* Logical - DevToMem */ + <&dma 17 0 0x0>, /* Logical - MemToDev */ + <&dma 16 0 0x2>, /* Logical - DevToMem */ + <&dma 16 0 0x0>, /* Logical - MemToDev */ + <&dma 39 0 0x2>, /* Logical - DevToMem */ + <&dma 39 0 0x0>; /* Logical - MemToDev */ + + dma-names = "iep_1_9", "oep_1_9", + "iep_2_10", "oep_2_10", + "iep_3_11", "oep_3_11", + "iep_4_12", "oep_4_12", + "iep_5_13", "oep_5_13", + "iep_6_14", "oep_6_14", + "iep_7_15", "oep_7_15", + "iep_8", "oep_8"; + }; + + dma: dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", "stericsson,dma40"; reg = <0x801C0000 0x1000 0x40010000 0x800>; - interrupts = <0 25 0x4>; + reg-names = "base", "lcpa"; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + + #dma-cells = <3>; + memcpy-channels = <56 57 58 59 60>; }; prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - interrupts = <0 47 0x4>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; interrupt-controller; @@ -208,7 +241,8 @@ thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; - interrupts = <21 0x4>, <22 0x4>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; status = "disabled"; }; @@ -322,21 +356,21 @@ ab8500 { compatible = "stericsson,ab8500"; interrupt-parent = <&intc>; - interrupts = <0 40 0x4>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; ab8500-rtc { compatible = "stericsson,ab8500-rtc"; - interrupts = <17 0x4 - 18 0x4>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH + 18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "60S", "ALARM"; }; ab8500-gpadc { compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 0x4 - 39 0x4>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH + 39 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "HW_CONV_END", "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_tvout_reg>; }; @@ -369,13 +403,13 @@ ab8500_usb { compatible = "stericsson,ab8500-usb"; - interrupts = < 90 0x4 - 96 0x4 - 14 0x4 - 15 0x4 - 79 0x4 - 74 0x4 - 75 0x4>; + interrupts = < 90 IRQ_TYPE_LEVEL_HIGH + 96 IRQ_TYPE_LEVEL_HIGH + 14 IRQ_TYPE_LEVEL_HIGH + 15 IRQ_TYPE_LEVEL_HIGH + 79 IRQ_TYPE_LEVEL_HIGH + 74 IRQ_TYPE_LEVEL_HIGH + 75 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ID_WAKEUP_R", "ID_WAKEUP_F", "VBUS_DET_F", @@ -383,15 +417,15 @@ "USB_LINK_STATUS", "USB_ADP_PROBE_PLUG", "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; }; ab8500-ponkey { compatible = "stericsson,ab8500-poweron-key"; - interrupts = <6 0x4 - 7 0x4>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH + 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; }; @@ -410,6 +444,11 @@ codec: ab8500-codec { compatible = "stericsson,ab8500-codec"; + V-AUD-supply = <&ab8500_ldo_audio_reg>; + V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; + V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; + V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; @@ -441,8 +480,8 @@ }; // supply for v-intcore12; VINTCORE12 LDO - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { - regulator-compatible = "ab8500_ldo_initcore"; + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-compatible = "ab8500_ldo_intcore"; }; // supply for tvout; gpadc; TVOUT LDO @@ -460,14 +499,14 @@ regulator-compatible = "ab8500_ldo_audio"; }; - // supply for v-anamic1 VAMic1-LDO + // supply for v-anamic1 VAMIC1 LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { - regulator-compatible = "ab8500_ldo_amamic2"; + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-compatible = "ab8500_ldo_anamic2"; }; // supply for v-dmic; VDMIC LDO @@ -486,7 +525,7 @@ i2c@80004000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; - interrupts = <0 21 0x4>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -499,7 +538,7 @@ i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; - interrupts = <0 22 0x4>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -512,7 +551,7 @@ i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; - interrupts = <0 55 0x4>; + interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -525,7 +564,7 @@ i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; - interrupts = <0 12 0x4>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -538,7 +577,7 @@ i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; - interrupts = <0 51 0x4>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; arm,primecell-periphid = <0x180024>; #address-cells = <1>; @@ -551,82 +590,114 @@ ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; - interrupts = <0 14 0x4>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; - - // Add one of these for each child device - cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 - &gpio6 22 0x4 &gpio7 0 0x4>; - }; uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; - interrupts = <0 11 0x4>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ + <&dma 13 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; + uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; - interrupts = <0 19 0x4>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */ + <&dma 12 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; + uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; - interrupts = <0 26 0x4>; + interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */ + <&dma 11 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; - interrupts = <0 60 0x4>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ + <&dma 29 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; - interrupts = <0 50 0x4>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */ + <&dma 32 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; - interrupts = <0 41 0x4>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */ + <&dma 28 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; - interrupts = <0 59 0x4>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; - interrupts = <0 99 0x4>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */ + <&dma 42 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + status = "disabled"; }; sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; - interrupts = <0 100 0x4>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; - interrupts = <0 31 0x4>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -634,7 +705,7 @@ msp1: msp@80124000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80124000 0x1000>; - interrupts = <0 62 0x4>; + interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -643,7 +714,7 @@ msp2: msp@80117000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80117000 0x1000>; - interrupts = <0 98 0x4>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -651,7 +722,7 @@ msp3: msp@80125000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80125000 0x1000>; - interrupts = <0 62 0x4>; + interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; status = "disabled"; }; @@ -686,5 +757,20 @@ status = "disabled"; }; + + cryp@a03cb000 { + compatible = "stericsson,ux500-cryp"; + reg = <0xa03cb000 0x1000>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + + v-ape-supply = <&db8500_vape_reg>; + }; + + hash@a03c2000 { + compatible = "stericsson,ux500-hash"; + reg = <0xa03c2000 0x1000>; + + v-ape-supply = <&db8500_vape_reg>; + }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 7e3065abd751..5cae2ab69762 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -44,11 +44,60 @@ gpio = <&gpio0 1 0>; }; }; + + clocks { + /* 25MHz reference crystal */ + ref25: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; }; &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; -&i2c0 { status = "okay"; }; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + si5351: clock-generator { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + + /* connect xtal input as source of pll0 and pll1 */ + silabs,pll-source = <0 0>, <1 0>; + + clkout0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + + clkout1 { + reg = <1>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + + clkout2 { + reg = <2>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + }; + }; +}; &sdio0 { status = "okay"; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 1ea9d34460a4..143b6d25bc80 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Ethernut 5"; @@ -40,7 +40,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -52,7 +52,7 @@ status = "okay"; gpios = <0 - &pioC 14 0 + &pioC 14 GPIO_ACTIVE_HIGH 0 >; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 96e50f569433..4d829685fdfb 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; @@ -31,7 +31,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -50,4 +50,4 @@ status = "okay"; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 72c114cfbaa0..9589ed9282f1 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -42,18 +42,22 @@ #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; }; cpu@2 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <2>; }; cpu@3 { + device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <3>; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 17136fc7a516..230099bb31c8 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { clocks { diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index c0bc426952ea..9db41b9d8358 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "dbx5x0.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include "dbx5x0.dtsi" / { memory { @@ -27,7 +28,7 @@ }; }; - soc-u9500 { + soc { uart@80120000 { status = "okay"; }; @@ -45,14 +46,14 @@ compatible = "tc3589x"; reg = <0x42>; interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -63,17 +64,43 @@ }; i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; + lp5521@33 { + compatible = "national,lp5521"; reg = <0x33>; + label = "lp5521_pri"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - lp5521@0x34 { - compatible = "lp5521"; + lp5521@34 { + compatible = "national,lp5521"; reg = <0x34>; + label = "lp5521_sec"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - bh1780@0x29 { + bh1780@29 { compatible = "rohm,bh1780gli"; reg = <0x33>; }; @@ -82,7 +109,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -97,7 +124,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -106,7 +133,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -116,7 +143,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -236,7 +263,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -256,7 +283,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index c2d274815923..c6bb07df2d1d 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" -/include/ "href.dtsi" -/include/ "stuib.dtsi" +#include "dbx5x0.dtsi" +#include "href.dtsi" +#include "stuib.dtsi" / { model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; @@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc { prcmu@80157000 { ab8500@5 { ab8500-gpio { @@ -41,7 +41,7 @@ }; i2c@80110000 { - bu21013_tp@0x5c { + bu21013_tp@5c { reset-gpio = <&tc3589x_gpio 13 0x4>; }; }; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 2b587a74b813..3d580d6447f9 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" -/include/ "href.dtsi" -/include/ "stuib.dtsi" +#include "dbx5x0.dtsi" +#include "href.dtsi" +#include "stuib.dtsi" / { model = "ST-Ericsson HREF (v60+) platform with Device Tree"; @@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc { i2c@80110000 { bu21013_tp@0x5c { reset-gpio = <&gpio4 15 0x4>; @@ -34,7 +34,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -48,7 +48,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -57,7 +57,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -67,7 +67,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -172,7 +172,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -192,7 +192,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 73fd7d0887b5..587ceef81e45 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -23,8 +23,12 @@ }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts new file mode 100644 index 000000000000..e7ed9786920a --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -0,0 +1,37 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx27-phytec-phycore-som.dts" + +/ { + model = "Phytec pcm970"; + compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; +}; + +&cspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gpio3 29 0>; + wp-gpios = <&gpio3 28 0>; + vmmc-supply = <&vmmc1_reg>; + status = "okay"; +}; + +&uart1 { + fsl,uart-has-rtscts; +}; + +&uart2 { + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts new file mode 100644 index 000000000000..f0105651869d --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts @@ -0,0 +1,179 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx27.dtsi" + +/ { + model = "Phytec pcm038"; + compatible = "phytec,imx27-pcm038", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi1 */ + serial@1000a000 { + status = "okay"; + }; + + i2c@1001d000 { + clock-frequency = <400000>; + status = "okay"; + at24@52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + lm75@4a { + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + }; + + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { + phy-reset-gpios = <&gpio3 30 0>; + status = "okay"; + }; + }; + }; + + nor_flash@c0000000 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0xc0000000 0x02000000>; + linux,mtd-name = "physmap-flash.0"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&cspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 0>; + status = "okay"; + + pmic: mc13783@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13783"; + spi-max-frequency = <20000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <23 0x4>; + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b_reg: sw1b { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a_reg: sw2a { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b_reg: sw2b { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio_reg: vaudio { + regulator-always-on; + regulator-boot-on; + }; + + violo_reg: violo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi_reg: viohi { + regulator-always-on; + regulator-boot-on; + }; + + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vrf1_reg: vrf1 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vrf2_reg: vrf2 { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { }; + + pwgt1spi_reg: pwgt1spi { + regulator-always-on; + }; + }; + }; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts deleted file mode 100644 index fe64e3a91df0..000000000000 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx27.dtsi" - -/ { - model = "Phytec pcm038"; - compatible = "phytec,imx27-pcm038", "fsl,imx27"; - - memory { - reg = <0x0 0x0>; - }; - - soc { - aipi@10000000 { /* aipi1 */ - serial@1000a000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - serial@1000b000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - serial@1000c000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - - i2c@1001d000 { - clock-frequency = <400000>; - status = "okay"; - at24@52 { - compatible = "at,24c32"; - pagesize = <32>; - reg = <0x52>; - }; - pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - lm75@4a { - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - }; - - aipi@10020000 { /* aipi2 */ - ethernet@1002b000 { - status = "okay"; - }; - }; - }; - - nor_flash@c0000000 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0xc0000000 0x02000000>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&nfc { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 75bd11386516..0695264ddf1b 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -25,6 +25,9 @@ gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; + spi0 = &cspi1; + spi1 = &cspi2; + spi2 = &cspi3; }; avic: avic-interrupt-controller@e0000000 { @@ -58,6 +61,16 @@ reg = <0x10000000 0x20000>; ranges; + dma: dma@10001000 { + compatible = "fsl,imx27-dma"; + reg = <0x10001000 0x1000>; + interrupts = <32>; + clocks = <&clks 50>, <&clks 70>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + #dma-channels = <16>; + }; + wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; @@ -89,6 +102,14 @@ clock-names = "ipg", "per"; }; + pwm0: pwm@10006000 { + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks 34>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; @@ -157,6 +178,28 @@ status = "disabled"; }; + sdhci1: sdhci@10013000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10013000 0x1000>; + interrupts = <11>; + clocks = <&clks 30>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 7>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@10014000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10014000 0x1000>; + interrupts = <10>; + clocks = <&clks 29>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 6>; + dma-names = "rx-tx"; + status = "disabled"; + }; + gpio1: gpio@10015000 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015000 0x100>; @@ -272,6 +315,17 @@ status = "disabled"; }; + sdhci3: sdhci@1001e000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x1001e000 0x1000>; + interrupts = <9>; + clocks = <&clks 28>, <&clks 60>; + clock-names = "ipg", "per"; + dmas = <&dma 36>; + dma-names = "rx-tx"; + status = "disabled"; + }; + gpt6: timer@1001f000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001f000 0x1000>; @@ -288,6 +342,21 @@ reg = <0x10020000 0x20000>; ranges; + coda: coda@10023000 { + compatible = "fsl,imx27-vpu"; + reg = <0x10023000 0x0200>; + interrupts = <53>; + clocks = <&clks 57>, <&clks 66>; + clock-names = "per", "ahb"; + iram = <&iram>; + }; + + clks: ccm@10027000{ + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; @@ -296,19 +365,16 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; - - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; }; + iram: iram@ffff4c00 { + compatible = "mmio-sram"; + reg = <0xffff4c00 0xb400>; + }; nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 3d905d16cbec..b602494c152b 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -103,6 +103,7 @@ apbx@80040000 { lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 1594694532b9..94c4476972c3 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -45,6 +45,17 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; ssp0: ssp@80010000 { @@ -58,12 +69,6 @@ }; apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_b>; @@ -73,15 +78,30 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; status = "okay"; - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; reg = <0x3c>; - pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7 0>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; }; }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 063e62059890..04b2f769ffbd 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -33,7 +33,7 @@ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ - 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -166,8 +166,8 @@ apbx@80040000 { pwm: pwm@80064000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&pwm3_pins_b>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; status = "okay"; }; @@ -265,7 +265,7 @@ gpio-sck = <&gpio2 16 0>; gpio-mosi = <&gpio2 17 0>; gpio-miso = <&gpio2 18 0>; - cs-gpios = <&gpio3 23 0>; + cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts new file mode 100644 index 000000000000..158111244122 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -0,0 +1,179 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10055 is an expansion board for the CFA-10036 module and + * CFA-10037, thus we need to include the CFA-10037 DTS. + */ +/include/ "imx28-cfa10037.dts" + +/ { + model = "Crystalfontz CFA-10055 Board"; + compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10055 + &hog_pins_cfa10055_pullup>; + + hog_pins_cfa10055: hog-10055@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + hog_pins_cfa10055_pullup: hog-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + }; + }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10055>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 5 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8357: hx8357@0 { + compatible = "himax,hx8357b", "himax,hx8357"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts new file mode 100644 index 000000000000..2da713cdb42a --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -0,0 +1,191 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10057 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10057 Board"; + compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10057 + &hog_pins_cfa10057_pullup>; + + hog_pins_cfa10057: hog-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + hog_pins_cfa10057_pullup: hog-10057-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 5aa44e05c9f5..880df2f13be8 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -220,7 +220,19 @@ auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 600f7cb51f3e..195451bf7706 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -32,8 +32,12 @@ }; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; @@ -330,6 +334,17 @@ fsl,pull-up = <0>; }; + auart2_2pins_b: auart2-2pins@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */ + 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < @@ -354,6 +369,28 @@ fsl,pull-up = <0>; }; + auart3_2pins_b: auart3-2pins@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart4_2pins_a: auart4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */ + 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < @@ -669,7 +706,7 @@ }; digctl@8001c000 { - compatible = "fsl,imx28-digctl"; + compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 2bcf6981d490..8f7f9ac0b989 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -45,6 +45,13 @@ status = "okay"; }; +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_2>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53fdde69bbf4..25764b505a61 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -175,10 +175,20 @@ }; }; + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 124>; + clock-names = "main_clk"; + status = "okay"; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -186,6 +196,8 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -193,6 +205,8 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -200,9 +214,18 @@ compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@73f80800 { + #index-cells = <1>; + compatible = "fsl,imx51-usbmisc"; + reg = <0x73f80800 0x200>; + clocks = <&clks 108>; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts new file mode 100644 index 000000000000..7d304d02ed38 --- /dev/null +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -0,0 +1,259 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" + +/ { + model = "DENX M53EVK"; + compatible = "denx,imx53-m53evk", "fsl,imx53"; + + memory { + reg = <0x70000000 0x20000000>; + }; + + soc { + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; + }; + }; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 3000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio>; + + user1 { + label = "user1"; + gpios = <&gpio2 8 0>; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "user2"; + gpios = <&gpio2 9 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx53-m53evk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-m53evk-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; + clocks = <&clks 150>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + clock-frequency = <400000>; + status = "okay"; + + stmpe610@41 { + compatible = "st,stmpe610"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + id = <0>; + blocks = <0x5>; + interrupts = <6 0x0>; + interrupt-parent = <&gpio7>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "stmpe,ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <3>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 + + >; + }; + + led_pin_gpio: led_gpio@0 { + fsl,pins = < + MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 + MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 + >; + }; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_1>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_1>; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 445a01119cc5..aaa33bc99f78 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -16,27 +16,81 @@ / { model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + + reg_backlight: fixed@0 { + compatible = "regulator-fixed"; + regulator-name = "lcd-supply"; + gpio = <&gpio2 5 0>; + startup-delay-us = <5000>; + enable-active-low; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000 0 0>; + brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; + default-brightness-level = <10>; + enable-gpios = <&gpio7 7 0>; + power-supply = <®_backlight>; + }; + + disp1: display@disp1 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp1_1>; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb24"; + status = "disabled"; + }; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + sound { + compatible = "tq,imx53-mba53-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-mba53-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <5>; + }; +}; + +&ldb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1_1>; + status = "disabled"; }; &iomuxc { lvds1 { pinctrl_lvds1_1: lvds1-grp1 { fsl,pins = < - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000 - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000 - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000 - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000 - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 >; }; pinctrl_lvds1_2: lvds1-grp2 { fsl,pins = < - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000 - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000 - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000 - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000 - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000 + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 >; }; }; @@ -44,33 +98,44 @@ disp1 { pinctrl_disp1_1: disp1-grp1 { fsl,pins = < - MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x10000 /* DISP1_DRDY */ - MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x10000 /* DISP1_HSYNC */ - MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x10000 /* DISP1_VSYNC */ - MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000 - MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000 - MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000 - MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000 - MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000 - MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000 - MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000 - MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000 - MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000 - MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000 - MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000 - MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000 - MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000 - MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000 - MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x10000 - MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x10000 - MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x10000 - MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x10000 - MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x10000 - MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x10000 - MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x10000 - MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x10000 - MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x10000 - MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x10000 + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */ + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */ + MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */ + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */ + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000 + >; + }; + }; + + tve { + pinctrl_vga_sync_1: vgasync-grp1 { + fsl,pins = < + /* VGA_VSYNC, HSYNC with max drive strength */ + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6 + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6 >; }; }; @@ -80,16 +145,27 @@ status = "okay"; }; +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; +}; + &i2c2 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 150>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; }; expander: pca9554@20 { compatible = "pca9554"; reg = <0x20>; interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; }; sensor2: lm75@49 { @@ -99,6 +175,7 @@ }; &fec { + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; @@ -114,10 +191,24 @@ status = "okay"; }; +&usbotg { + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + &uart1 { status = "okay"; }; +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart2 { status = "okay"; }; @@ -133,3 +224,13 @@ &i2c3 { status = "okay"; }; + +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync_1>; + ddc = <&i2c3>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 8f0e9ae0e3e6..512a1f608253 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -21,6 +21,33 @@ reg = <0x70000000 0x40000000>; }; + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp0_1>; + status = "disabled"; + display-timings { + claawvga { + native-mode; + clock-frequency = <27000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <60>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -147,6 +174,7 @@ reg = <0x0a>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; + clocks = <&clks 150>; }; }; @@ -268,3 +296,11 @@ phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 38bed3ed7c1a..abd72af545bf 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -35,7 +35,9 @@ &esdhc2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; + pinctrl-0 = <&pinctrl_esdhc2_1>, + <&pinctrl_tqma53_esdhc2_2>; + vmmc-supply = <®_3p3v>; wp-gpios = <&gpio1 2 0>; cd-gpios = <&gpio1 4 0>; status = "disabled"; @@ -69,14 +71,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + esdhc2_2 { + pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 { + fsl,pins = < + MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */ + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */ + >; + }; + }; + i2s { pinctrl_i2s_1: i2s-grp1 { fsl,pins = < - MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */ - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */ - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */ - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */ - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */ + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */ + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */ + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */ >; }; }; @@ -84,16 +94,17 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */ - MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */ - MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */ - MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */ - MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */ - MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */ - MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */ - MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */ - MX53_PAD_GPIO_3__GPIO1_3 0x10000 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */ + MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */ + MX53_PAD_GPIO_3__GPIO1_3 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */ + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */ >; }; }; @@ -149,7 +160,7 @@ reg = <0x8>; fsl,mc13xxx-uses-rtc; interrupt-parent = <&gpio2>; - interrupts = <6 8>; /* PDATA_DATA6, low active */ + interrupts = <6 4>; /* PATA_DATA6, active high */ }; sensor1: lm75@48 { diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi new file mode 100644 index 000000000000..f494766700a3 --- /dev/null +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -0,0 +1,122 @@ +/* + * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "imx53.dtsi" + +/ { + model = "Ka-Ro TX53"; + compatible = "karo,tx53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x40000000>; /* Up to 1GiB */ + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_2>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_2>; + status = "disabled"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; + status = "disabled"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "disabled"; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire_1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_1>; + status = "disabled"; +}; + +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "disabled"; +}; + +&ssi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>, + <&pinctrl_uart1_3>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_2>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index eb83aa039b8b..3895fbba8fce 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -27,6 +27,9 @@ gpio4 = &gpio5; gpio5 = &gpio6; gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; }; tzic: tz-interrupt-controller@0fffc000 { @@ -163,10 +166,27 @@ }; }; + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 124>; + clock-names = "main_clk"; + status = "okay"; + }; + + usbphy1: usbphy@1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks 125>; + clock-names = "main_clk"; + status = "okay"; + }; + usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -174,6 +194,9 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80200 0x0200>; interrupts = <14>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -181,6 +204,8 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80400 0x0200>; interrupts = <16>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -188,9 +213,18 @@ compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80600 0x0200>; interrupts = <17>; + clocks = <&clks 108>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@53f80800 { + #index-cells = <1>; + compatible = "fsl,imx53-usbmisc"; + reg = <0x53f80800 0x200>; + clocks = <&clks 108>; + }; + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; @@ -267,6 +301,24 @@ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 >; }; + + pinctrl_audmux_2: audmuxgrp-2 { + fsl,pins = < + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 + >; + }; + + pinctrl_audmux_3: audmuxgrp-3 { + fsl,pins = < + MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 + MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 + MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 + MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 + >; + }; }; fec { @@ -284,6 +336,29 @@ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 >; }; + + pinctrl_fec_2: fecgrp-2 { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_KEY_ROW1__FEC_COL 0x80000000 + MX53_PAD_KEY_COL3__FEC_CRS 0x80000000 + MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000 + MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000 + MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000 + MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000 + MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000 + MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000 + >; + }; }; csi { @@ -312,6 +387,22 @@ MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 >; }; + + pinctrl_csi_2: csigrp-2 { + fsl,pins = < + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 + >; + }; }; cspi { @@ -322,6 +413,14 @@ MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 >; }; + + pinctrl_cspi_2: cspigrp-2 { + fsl,pins = < + MX53_PAD_EIM_D22__CSPI_MISO 0x1d5 + MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5 + MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5 + >; + }; }; ecspi1 { @@ -332,6 +431,27 @@ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 >; }; + + pinctrl_ecspi1_2: ecspi1grp-2 { + fsl,pins = < + MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 + MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 + MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 + >; + }; + }; + + ecspi2 { + pinctrl_ecspi2_1: ecspi2grp-1 { + fsl,pins = < + MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000 + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000 + >; + }; }; esdhc1 { @@ -406,6 +526,13 @@ MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 >; }; + + pinctrl_can1_3: can1grp-3 { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 + >; + }; }; can2 { @@ -424,6 +551,13 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 >; }; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 + MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + >; + }; }; i2c2 { @@ -433,6 +567,13 @@ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 >; }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 + MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 + >; + }; }; i2c3 { @@ -444,6 +585,119 @@ }; }; + ipu_disp0 { + pinctrl_ipu_disp0_1: ipudisp0grp-1 { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 + >; + }; + }; + + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 + MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 + MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 + MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 + MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 + MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 + MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 + >; + }; + }; + + nand { + pinctrl_nand_1: nandgrp-1 { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; + }; + }; + owire { pinctrl_owire_1: owiregrp-1 { fsl,pins = < @@ -452,6 +706,22 @@ }; }; + pwm1 { + pinctrl_pwm1_1: pwm1grp-1 { + fsl,pins = < + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 + >; + }; + }; + + pwm2 { + pinctrl_pwm2_1: pwm2grp-1 { + fsl,pins = < + MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -466,6 +736,13 @@ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 >; }; + + pinctrl_uart1_3: uart1grp-3 { + fsl,pins = < + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 + >; + }; }; uart2 { @@ -475,6 +752,15 @@ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 >; }; + + pinctrl_uart2_2: uart2grp-2 { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + >; + }; }; uart3 { @@ -513,7 +799,6 @@ >; }; }; - }; gpr: iomuxc-gpr@53fa8000 { @@ -781,6 +1066,16 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + tve: tve@63ff0000 { + compatible = "fsl,imx53-tve"; + reg = <0x63ff0000 0x1000>; + interrupts = <92>; + clocks = <&clks 69>, <&clks 116>; + clock-names = "tve", "di_sel"; + crtcs = <&ipu 1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index 7adcec360213..95da71185a4a 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -28,4 +28,12 @@ >; }; }; + + ecspi1 { + pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { + fsl,pins = < + MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 7efb05db4783..8989df2b89e5 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -29,6 +29,7 @@ MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6DL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5bcdf3a90bb3..2b3ecd679350 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -18,12 +18,14 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; @@ -35,6 +37,27 @@ compatible = "fsl,imx6dl-iomuxc"; reg = <0x020e0000 0x4000>; + audmux { + pinctrl_audmux_2: audmux-2 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 + MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 + MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 + MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; + }; + enet { pinctrl_enet_1: enetgrp-1 { fsl,pins = < @@ -78,6 +101,39 @@ }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = < + MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + }; + + i2c1 { + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -149,6 +205,64 @@ }; }; + weim { + pinctrl_weim_cs0_1: weim_cs0grp-1 { + fsl,pins = < + MX6DL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor_1: weim_norgrp-1 { + fsl,pins = < + MX6DL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6DL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + /* data */ + MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* address */ + MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6DL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6DL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6DL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6DL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6DL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6DL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6DL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6DL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6DL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6DL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6DL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6DL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6DL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6DL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6DL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6DL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + }; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts new file mode 100644 index 000000000000..7d37ec60d58d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; + compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; +}; + +&fec { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi new file mode 100644 index 000000000000..f5e1981025ed --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6q.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + >; + }; + }; + + pfla02 { + pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 { + fsl,pins = < + MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2 + &pinctrl_usdhc3_pfla02>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 49d6f2831ec9..09a75807bc6d 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -32,4 +32,12 @@ >; }; }; + + ecspi1 { + pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { + fsl,pins = < + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 442051350225..0038228c508c 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -33,6 +33,7 @@ MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000 MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000 MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 21e675848bd1..ba09dc32324e 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -18,6 +18,7 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; operating-points = < @@ -39,18 +40,21 @@ cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; cpu@2 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; }; cpu@3 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; }; @@ -157,6 +161,27 @@ MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 >; }; + + pinctrl_enet_3: enetgrp-3 { + fsl,pins = < + MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; }; gpmi-nand { @@ -168,8 +193,6 @@ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 - MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 @@ -192,6 +215,13 @@ MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; }; i2c2 { @@ -268,6 +298,17 @@ MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; + + pinctrl_usdhc2_2: usdhc2grp-2 { + fsl,pins = < + MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; }; usdhc3 { @@ -325,6 +366,65 @@ >; }; }; + + weim { + pinctrl_weim_cs0_1: weim_cs0grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor_1: weimnorgrp-1 { + fsl,pins = < + MX6Q_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6Q_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + /* data */ + MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* address */ + MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6Q_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6Q_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6Q_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6Q_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6Q_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6Q_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6Q_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6Q_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6Q_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6Q_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6Q_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6Q_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6Q_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 4d237cffcc41..e994011220e7 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -16,6 +16,22 @@ }; }; +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>; + status = "disabled"; /* pin conflict with WEIM NOR */ + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_2>; @@ -23,6 +39,12 @@ status = "okay"; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_1>; @@ -36,3 +58,22 @@ wp-gpios = <&gpio1 13 0>; status = "okay"; }; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + status = "disabled"; /* pin conflict with SPI NOR */ + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index e21f6a89cf0f..6e5dfdb32416 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -26,6 +26,13 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_audio: wm8962_supply { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; }; gpio-keys { @@ -43,6 +50,31 @@ linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "MICBIAS", "AMIC", + "IN3R", "MICBIAS", + "DMIC", "MICBIAS", + "DMICDAT", "DMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "okay"; }; &fec { @@ -52,6 +84,40 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks 169>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9e8296e4c343..f21d259080fd 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -106,6 +106,8 @@ interrupts = <0 92 0x04>; cache-unified; cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; }; pmu { @@ -638,7 +640,7 @@ status = "disabled"; }; - usbmisc: usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; @@ -742,9 +744,11 @@ reg = <0x021b4000 0x4000>; }; - weim@021b8000 { + weim: weim@021b8000 { + compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 0x04>; + clocks = <&clks 196>; }; ocotp@021bc000 { @@ -752,11 +756,6 @@ reg = <0x021bc000 0x4000>; }; - ocotp@021c0000 { - reg = <0x021c0000 0x4000>; - interrupts = <0 21 0x04>; - }; - tzasc@021d0000 { /* TZASC1 */ reg = <0x021d0000 0x4000>; interrupts = <0 108 0x04>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts new file mode 100644 index 000000000000..2886a590823d --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_1>; + bus-width = <8>; + cd-gpios = <&gpio4 7 0>; + wp-gpios = <&gpio4 6 0>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio4 29 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio3 22 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi new file mode 100644 index 000000000000..c5e5da02d7e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -0,0 +1,779 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "skeleton.dtsi" +#include "imx6sl-pinfunc.h" +#include <dt-bindings/clock/imx6sl-clock.h> + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + osc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 0x04>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 94 0x04>; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI1>, + <&clks IMX6SL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI2>, + <&clks IMX6SL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI3>, + <&clks IMX6SL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 0x04>; + clocks = <&clks IMX6SL_CLK_ECSPI4>, + <&clks IMX6SL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@02018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts = <0 30 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@02024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <0 27 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <0 46 0x04>; + clocks = <&clks IMX6SL_CLK_SSI1>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <0 47 0x04>; + clocks = <&clks IMX6SL_CLK_SSI2>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <0 48 0x04>; + clocks = <&clks IMX6SL_CLK_SSI3>; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + uart3: serial@02034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@02038000 { + compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + reg = <0x02038000 0x4000>; + interrupts = <0 29 0x04>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <0 83 0x04>; + clocks = <&clks IMX6SL_CLK_PWM1>, + <&clks IMX6SL_CLK_PWM1>; + clock-names = "ipg", "per"; + }; + + pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <0 84 0x04>; + clocks = <&clks IMX6SL_CLK_PWM2>, + <&clks IMX6SL_CLK_PWM2>; + clock-names = "ipg", "per"; + }; + + pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <0 85 0x04>; + clocks = <&clks IMX6SL_CLK_PWM3>, + <&clks IMX6SL_CLK_PWM3>; + clock-names = "ipg", "per"; + }; + + pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <0 86 0x04>; + clocks = <&clks IMX6SL_CLK_PWM4>, + <&clks IMX6SL_CLK_PWM4>; + clock-names = "ipg", "per"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 0x04>; + clocks = <&clks IMX6SL_CLK_GPT>, + <&clks IMX6SL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 0x04 0 67 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 0x04 0 69 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 0x04 0 71 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 0x04 0 73 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 0x04 0 75 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + reg = <0x020b8000 0x4000>; + interrupts = <0 82 0x04>; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 0x04>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 0x04>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2850000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pu: regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + clocks = <&clks IMX6SL_CLK_USBPHY1>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <0 45 0x04>; + clocks = <&clks IMX6SL_CLK_USBPHY2>; + }; + + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <0 56 0x04>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <0 57 0x04>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sl-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sl-iomuxc"; + reg = <0x020e0000 0x4000>; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + }; + + usdhc1 { + pinctrl_usdhc1_1: usdhc1grp-1 { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; + }; + + csi: csi@020e4000 { + reg = <0x020e4000 0x4000>; + interrupts = <0 7 0x04>; + }; + + spdc: spdc@020e8000 { + reg = <0x020e8000 0x4000>; + interrupts = <0 6 0x04>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 0x04>; + clocks = <&clks IMX6SL_CLK_SDMA>, + <&clks IMX6SL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; + }; + + pxp: pxp@020f0000 { + reg = <0x020f0000 0x4000>; + interrupts = <0 98 0x04>; + }; + + epdc: epdc@020f4000 { + reg = <0x020f4000 0x4000>; + interrupts = <0 97 0x04>; + }; + + lcdif: lcdif@020f8000 { + reg = <0x020f8000 0x4000>; + interrupts = <0 39 0x04>; + }; + + dcp: dcp@020fc000 { + reg = <0x020fc000 0x4000>; + interrupts = <0 99 0x04>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 42 0x04>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + }; + + fec: ethernet@02188000 { + compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 114 0x04>; + clocks = <&clks IMX6SL_CLK_ENET_REF>, + <&clks IMX6SL_CLK_ENET_REF>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 0x04>; + clocks = <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 0x04>; + clocks = <&clks IMX6SL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 0x04>; + clocks = <&clks IMX6SL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 0x04>; + clocks = <&clks IMX6SL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + rngb: rngb@021b4000 { + reg = <0x021b4000 0x4000>; + interrupts = <0 5 0x04>; + }; + + weim: weim@021b8000 { + reg = <0x021b8000 0x4000>; + interrupts = <0 14 0x04>; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sl-ocotp"; + reg = <0x021bc000 0x4000>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index d6c9d65cbaeb..0ed2f56a91f1 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -40,5 +40,33 @@ marvell,function = "sdio"; }; }; + + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 23991e45bc55..69b760d5b11d 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -49,6 +49,34 @@ }; }; + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; + thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 5f21d4e427b0..00c48d26de68 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -18,10 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_spi &pmx_uart0 - &pmx_cloudbox_sata0 >; - pinctrl-names = "default"; - pmx_cloudbox_sata0: pmx-cloudbox-sata0 { marvell,pins = "mpp15"; marvell,function = "sata0"; @@ -29,16 +25,22 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; clock-frequency = <166666667>; status = "okay"; }; sata@80000 { + pinctrl-0 = <&pmx_cloudbox_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index c9c44b2f62d7..14d4ceea3057 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -17,6 +17,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320 + &pmx_led_red_left_hdd &pmx_led_red_right_hdd + &pmx_led_white_usb>; + pinctrl-names = "default"; + blue-power { label = "dns320:blue:power"; gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ @@ -46,6 +51,8 @@ }; serial@12100 { + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index e4e4930dc5cf..63872570e6ce 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -17,6 +17,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325 + &pmx_led_red_left_hdd &pmx_led_red_right_hdd + &pmx_led_white_usb>; + pinctrl-names = "default"; + white-power { label = "dns325:white:power"; gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 6875ac00c174..0afe1d07c803 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -9,6 +9,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_power &pmx_button_unmount + &pmx_button_reset>; + pinctrl-names = "default"; + button@1 { label = "Power button"; linux,code = <116>; @@ -29,6 +33,8 @@ gpio_fan { /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; + pinctrl-names = "default"; gpios = <&gpio1 14 1 &gpio1 13 1>; gpio-fan,speed-map = <0 0 @@ -38,27 +44,17 @@ gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_power_off>; + pinctrl-names = "default"; gpios = <&gpio1 4 0>; }; ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_nand &pmx_uart1 - &pmx_sata0 &pmx_sata1 - &pmx_led_power - &pmx_led_red_right_hdd - &pmx_led_red_left_hdd - &pmx_led_red_usb_325 - &pmx_button_power - &pmx_led_red_usb_320 - &pmx_power_off &pmx_power_back_on - &pmx_power_sata0 &pmx_power_sata1 - &pmx_present_sata0 &pmx_present_sata1 - &pmx_led_white_usb &pmx_fan_tacho - &pmx_fan_high_speed &pmx_fan_low_speed - &pmx_button_unmount &pmx_button_reset - &pmx_temp_alarm >; + pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 + &pmx_present_sata1 &pmx_fan_tacho + &pmx_temp_alarm>; pinctrl-names = "default"; pmx_sata0: pmx-sata0 { @@ -147,11 +143,15 @@ }; }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "okay"; chip-delay = <35>; @@ -192,6 +192,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; + pinctrl-names = "default"; sata0_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 0196cf6b0ef2..7714742bb8d8 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -18,11 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_usb_power_enable - &pmx_led_green &pmx_led_orange >; - pinctrl-names = "default"; - pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; @@ -62,6 +57,8 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_green &pmx_led_orange>; + pinctrl-names = "default"; health { label = "status:green:health"; @@ -77,6 +74,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 289e51d86372..36c7ba38d500 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -18,12 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_spi - &pmx_led_bluetooth &pmx_led_wifi - &pmx_led_wifi_ap >; - pinctrl-names = "default"; - pmx_led_bluetooth: pmx-led-bluetooth { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -43,6 +37,8 @@ spi@10600 { status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; m25p40@0 { #address-cells = <1>; @@ -79,11 +75,15 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; bluetooth { label = "dreamplug:blue:bluetooth"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index c3573be7b92c..31caa6405065 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -18,15 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange - &pmx_led_left_cap_0 &pmx_led_left_cap_1 - &pmx_led_left_cap_2 &pmx_led_left_cap_3 - &pmx_led_right_cap_0 &pmx_led_right_cap_1 - &pmx_led_right_cap_2 &pmx_led_right_cap_3 - >; - pinctrl-names = "default"; - pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; @@ -109,6 +100,13 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; health { label = "status:green:health"; @@ -156,6 +154,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 44fd97dfc1f3..1e642f39b154 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -18,11 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g - &pmx_led_wmode_r &pmx_led_wmode_g >; - pinctrl-names = "default"; - pmx_led_health_r: pmx-led-health-r { marvell,pins = "mpp46"; marvell,function = "gpio"; @@ -72,11 +67,16 @@ mvsdio@90000 { status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g + &pmx_led_wmode_r &pmx_led_wmode_g >; + pinctrl-names = "default"; health-r { label = "guruplug:red:health"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 5335b1aa8601..20c4b081f420 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -18,13 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand - &pmx_led_os_red &pmx_power_off - &pmx_led_os_green &pmx_led_usb_transfer - &pmx_button_reset &pmx_button_usb_copy >; - pinctrl-names = "default"; - pmx_led_os_red: pmx-led-os-red { marvell,pins = "mpp22"; marvell,function = "gpio"; @@ -61,6 +54,8 @@ nand@3000000 { status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "u-boot"; @@ -84,6 +79,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; @@ -97,6 +95,9 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green + &pmx_led_usb_transfer>; + pinctrl-names = "default"; green-os { label = "ib62x0:green:os"; @@ -114,6 +115,8 @@ }; gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_power_off>; + pinctrl-names = "default"; gpios = <&gpio0 24 0>; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 12ccf74ac3c4..027501857cb6 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -20,51 +20,43 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 - &pmx_gpio_41 &pmx_gpio_42 - &pmx_gpio_43 &pmx_gpio_44 - &pmx_gpio_45 &pmx_gpio_46 - &pmx_gpio_47 &pmx_gpio_48 >; - pinctrl-names = "default"; - - pmx_gpio_12: pmx-gpio-12 { + pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; }; - pmx_gpio_35: pmx-gpio-35 { + pmx_button_otb: pmx-button-otb { marvell,pins = "mpp35"; marvell,function = "gpio"; }; - pmx_gpio_41: pmx-gpio-41 { + pmx_led_level: pmx-led-level { marvell,pins = "mpp41"; marvell,function = "gpio"; }; - pmx_gpio_42: pmx-gpio-42 { + pmx_led_power_blue: pmx-led-power-blue { marvell,pins = "mpp42"; marvell,function = "gpio"; }; - pmx_gpio_43: pmx-gpio-43 { + pmx_led_power_red: pmx-power-red { marvell,pins = "mpp43"; marvell,function = "gpio"; }; - pmx_gpio_44: pmx-gpio-44 { + pmx_led_usb1: pmx-led-usb1 { marvell,pins = "mpp44"; marvell,function = "gpio"; }; - pmx_gpio_45: pmx-gpio-45 { + pmx_led_usb2: pmx-led-usb2 { marvell,pins = "mpp45"; marvell,function = "gpio"; }; - pmx_gpio_46: pmx-gpio-46 { + pmx_led_usb3: pmx-led-usb3 { marvell,pins = "mpp46"; marvell,function = "gpio"; }; - pmx_gpio_47: pmx-gpio-47 { + pmx_led_usb4: pmx-led-usb4 { marvell,pins = "mpp47"; marvell,function = "gpio"; }; - pmx_gpio_48: pmx-gpio-48 { + pmx_led_otb: pmx-led-otb { marvell,pins = "mpp48"; marvell,function = "gpio"; }; @@ -113,6 +105,11 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_level &pmx_led_power_blue + &pmx_led_power_red &pmx_led_usb1 + &pmx_led_usb2 &pmx_led_usb3 + &pmx_led_usb4 &pmx_led_otb >; + pinctrl-names = "default"; led-level { label = "led_level"; @@ -154,6 +151,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; + pinctrl-names = "default"; + button@1 { label = "OTB Button"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 3694e94f6e99..00a7bfe5e83b 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -18,12 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_button_reset &pmx_button_power - &pmx_led_backup &pmx_led_power - &pmx_button_otb &pmx_led_rebuild - &pmx_led_health - &pmx_led_sata_brt_ctrl_1 + pinctrl-0 = < &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 &pmx_led_backup_brt_ctrl_2 @@ -151,6 +146,9 @@ }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_backup &pmx_led_power + &pmx_led_rebuild &pmx_led_health >; + pinctrl-names = "default"; power_led { label = "status:white:power_led"; @@ -174,6 +172,11 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_reset &pmx_button_power + &pmx_button_otb>; + pinctrl-names = "default"; + + Power { label = "Power Button"; linux,code = <116>; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index 0bdce0ad7277..c3f036b86cca 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5bbd0542cdd3..5d9f5ea78700 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -18,9 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda - &pmx_i2c_gpio_scl >; + pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; pinctrl-names = "default"; pmx_i2c_gpio_sda: pmx-gpio-sda { @@ -38,8 +36,17 @@ }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "ok"; chip-delay = <25>; }; }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = < &gpio0 8 0 /* sda */ + &gpio0 9 0 >; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 37d45c4f88fb..4945eba03ae6 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -8,16 +8,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus - &pmx_fan_low &pmx_fan_high - &pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_fan_lock &pmx_button_function - &pmx_power_switch &pmx_power_auto_switch - &pmx_led_function_blue >; - pinctrl-names = "default"; - pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; @@ -112,6 +102,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + button@1 { label = "Function Button"; linux,code = <357>; @@ -133,6 +127,10 @@ gpio_leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue>; + pinctrl-names = "default"; led@1 { label = "lsxl:blue:func"; @@ -163,6 +161,8 @@ gpio_fan { compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; gpios = <&gpio0 19 1 &gpio0 18 1>; gpio-fan,speed-map = <0 3 @@ -176,6 +176,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 758824118a9a..211916a5a0fe 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -18,16 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_led_health - &pmx_sata0 &pmx_sata1 - &pmx_led_user1o - &pmx_led_user1g &pmx_led_user0o - &pmx_led_user0g &pmx_led_misc - >; - pinctrl-names = "default"; - pmx_led_health: pmx-led-health { marvell,pins = "mpp7"; marvell,function = "gpo"; @@ -91,9 +81,13 @@ serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "okay"; partition@0 { @@ -127,22 +121,29 @@ }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; nr-ports = <2>; status = "okay"; - }; mvsdio@90000 { pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 15 0>; + cd-gpios = <&gpio1 15 1>; /* No WP GPIO */ }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_health + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + >; + pinctrl-names = "default"; health { label = "status:green:health"; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 1ca66ab83ad6..b79ea8cebf4c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -18,18 +18,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_uart0 - &pmx_button_power - &pmx_button_backup - &pmx_button_reset - &pmx_led_blue_power - &pmx_led_blue_activity - &pmx_led_blue_disk1 - &pmx_led_blue_disk2 - &pmx_led_blue_backup >; - pinctrl-names = "default"; - pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -74,6 +62,8 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "okay"; }; @@ -115,6 +105,10 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity + &pmx_led_blue_disk1 &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; power_led { label = "status:blue:power_led"; @@ -143,6 +137,10 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_button_power &pmx_button_backup + &pmx_button_reset>; + pinctrl-names = "default"; + button@1 { label = "Power Button"; linux,code = <116>; /* KEY_POWER */ diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 6affd924fe11..2afac0405816 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -8,10 +8,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 - &pmx_ns2_sata0 &pmx_ns2_sata1>; - pinctrl-names = "default"; - pmx_ns2_sata0: pmx-ns2-sata0 { marvell,pins = "mpp21"; marvell,function = "sata0"; @@ -23,10 +19,14 @@ }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "okay"; }; spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "okay"; flash@0 { @@ -45,6 +45,8 @@ }; i2c@11000 { + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; status = "okay"; eeprom@50 { diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index f2d36ecf36d8..b50e93d7796c 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index b02eb4ea1bb4..af8259fe8955 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index bcec4d6cada7..85f24d227e17 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -13,6 +13,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index adab1ab25733..329e530bffe7 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -14,6 +14,8 @@ ocp@f1000000 { sata@80000 { + pinctrl-0 = <&pmx_ns2_sata0>; + pinctrl-names = "default"; status = "okay"; nr-ports = <1>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index a7412b937a8a..089024a6deab 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "ZyXEL NSA310"; @@ -17,22 +18,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_led_esata_green - &pmx_led_esata_red - &pmx_led_usb_green - &pmx_led_usb_red - &pmx_usb_power_off - &pmx_led_sys_green - &pmx_led_sys_red - &pmx_btn_reset - &pmx_btn_copy - &pmx_led_copy_green - &pmx_led_copy_red - &pmx_led_hdd_green - &pmx_led_hdd_red - &pmx_unknown - &pmx_btn_power - &pmx_pwr_off >; + pinctrl-0 = <&pmx_unknown>; pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -182,6 +168,8 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; button@1 { label = "Power Button"; @@ -202,6 +190,12 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red + &pmx_led_usb_green &pmx_led_usb_red + &pmx_led_sys_green &pmx_led_sys_red + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd_green &pmx_led_hdd_red>; + pinctrl-names = "default"; green-sys { label = "nsa310:green:sys"; @@ -247,6 +241,8 @@ gpio_poweroff { compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; gpios = <&gpio1 16 0>; }; @@ -254,6 +250,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-names = "default"; usb0_power_off: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index d27f7245f8e7..38dc8517d777 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -19,15 +19,21 @@ ocp@f1000000 { serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; serial@12100 { status = "ok"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; }; nand@3000000 { chip-delay = <25>; status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "uboot"; @@ -67,6 +73,8 @@ i2c@11100 { status = "okay"; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -75,16 +83,7 @@ }; pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_uart1 &pmx_twsi1 - &pmx_dip_sw0 &pmx_dip_sw1 - &pmx_dip_sw2 &pmx_dip_sw3 - &pmx_gpio_0 &pmx_gpio_1 - &pmx_gpio_2 &pmx_gpio_3 - &pmx_gpio_4 &pmx_gpio_5 - &pmx_gpio_6 &pmx_gpio_7 - &pmx_led_red &pmx_led_green - &pmx_led_yellow >; + pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; pmx_uart0: pmx-uart0 { @@ -104,63 +103,14 @@ marvell,function = "sysrst"; }; - pmx_dip_sw0: pmx-dip-sw0 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_dip_sw1: pmx-dip-sw1 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_dip_sw2: pmx-dip-sw2 { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_dip_sw3: pmx-dip-sw3 { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_gpio_0: pmx-gpio-0 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_gpio_2: pmx-gpio-2 { - marvell,pins = "mpp26"; + pmx_dip_switches: pmx-dip-switches { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23"; marvell,function = "gpio"; }; - pmx_gpio_3: pmx-gpio-3 { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_gpio_4: pmx-gpio-4 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_gpio_5: pmx-gpio-5 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_gpio_6: pmx-gpio-6 { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - pmx_gpio_7: pmx-gpio-7 { - marvell,pins = "mpp31"; + pmx_gpio_header: pmx-gpio-header { + marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27", + "mpp28", "mpp29", "mpp30", "mpp31"; marvell,function = "gpio"; }; @@ -174,18 +124,8 @@ marvell,function = "gpio"; }; - pmx_led_red: pmx-led-red { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_led_yellow: pmx-led-yellow { - marvell,pins = "mpp43"; + pmx_leds: pmx-leds { + marvell,pins = "mpp41", "mpp42", "mpp43"; marvell,function = "gpio"; }; }; @@ -193,6 +133,8 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; led-red { label = "obsa6:red:stat"; @@ -209,4 +151,18 @@ gpios = <&gpio1 11 1>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_gpio_init>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 6 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi new file mode 100644 index 000000000000..f7143f128504 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -0,0 +1,93 @@ +/* + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_red: pmx-led-red { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_blue: pmx-led-blue { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_sdio_wp: pmx-sdio-wp { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts new file mode 100644 index 000000000000..f620ce48de97 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies eSATA SheevaPlug"; + compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 1>; + wp-gpios = <&gpio1 15 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts new file mode 100644 index 000000000000..bf1dff251432 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies SheevaPlug"; + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue &pmx_led_red>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + + misc { + label = "sheevaplug:red:misc"; + gpios = <&gpio1 14 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 66eb45b00b25..f2052d7bc10f 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -19,18 +19,6 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { /* - * GPIO LED layout - * - * /-SYS_LED(2) - * | - * | /-DISK_LED - * | | - * | | /-WLAN_LED(2) - * | | | - * [SW] [*] [*] [*] - */ - - /* * Switch positions * * /-SW_LEFT(2) @@ -41,19 +29,8 @@ * | | | * PS [L] [I] [R] LEDS */ - pinctrl-0 = < &pmx_led_disk_yellow - &pmx_sata0_pwr_enable - &pmx_led_sys_red - &pmx_led_sys_blue - &pmx_led_wifi_green - &pmx_sw_left - &pmx_sw_right - &pmx_sw_idle - &pmx_sw_left2 - &pmx_led_wifi_yellow - &pmx_uart0 - &pmx_nand - &pmx_twsi0 >; + pinctrl-0 = <&pmx_sw_left &pmx_sw_right + &pmx_sw_idle &pmx_sw_left2>; pinctrl-names = "default"; pmx_led_disk_yellow: pmx-led-disk-yellow { @@ -109,10 +86,14 @@ serial@12000 { status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; nand@3000000 { status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; partition@0 { label = "u-boot"; @@ -147,6 +128,8 @@ i2c@11000 { status = "ok"; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; }; mvsdio@90000 { @@ -154,11 +137,28 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; }; gpio-leds { + /* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red + &pmx_led_sys_blue &pmx_led_wifi_green + &pmx_led_wifi_yellow>; + pinctrl-names = "default"; disk { label = "topkick:yellow:disk"; @@ -187,6 +187,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_pwr_enable>; + pinctrl-names = "default"; sata0_power: regulator@1 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 8295c833887f..a2a90c40befa 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -7,10 +7,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi - &pmx_twsi0 &pmx_sata0 &pmx_sata1 - &pmx_ram_size &pmx_reset_button - &pmx_USB_copy_button &pmx_board_id>; + pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; pmx_ram_size: pmx-ram-size { @@ -38,6 +35,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index df3f95dfba33..b5be3ea9b34d 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -7,10 +7,7 @@ ocp@f1000000 { pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi - &pmx_twsi0 &pmx_sata0 &pmx_sata1 - &pmx_ram_size &pmx_reset_button - &pmx_USB_copy_button &pmx_board_id>; + pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; pmx_ram_size: pmx-ram-size { @@ -32,12 +29,23 @@ marvell,function = "gpio"; }; }; + pcie-controller { + status = "okay"; + + pcie@2,0 { + status = "okay"; + }; + }; + }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; + pinctrl-names = "default"; + button@1 { label = "USB Copy"; linux,code = <133>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 64ea27cb3298..b9325d45be78 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -17,6 +17,8 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -26,13 +28,19 @@ serial@12000 { clock-frequency = <200000000>; status = "okay"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; }; serial@12100 { clock-frequency = <200000000>; status = "okay"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; }; spi@10600 { status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; @@ -71,6 +79,8 @@ }; }; sata@80000 { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; status = "okay"; nr-ports = <2>; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index fada7e6d24d8..5d7b759f06a8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,18 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,feroceon"; + clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; + clock-names = "cpu_clk", "ddrclk", "powersave"; + }; + }; + aliases { gpio0 = &gpio0; gpio1 = &gpio1; @@ -71,13 +83,6 @@ status = "disabled"; }; - rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; @@ -151,15 +156,6 @@ status = "okay"; }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - status = "disabled"; - }; - nand@3000000 { #address-cells = <1>; #size-cells = <1>; @@ -194,13 +190,5 @@ clocks = <&gate_clk 17>; status = "okay"; }; - - mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3ec..02df1914a47c 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -94,26 +94,26 @@ led1g { label = "led1:green"; - gpios = <&pioB 0 1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led1r { label = "led1:red"; - gpios = <&pioB 1 1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led2g { label = "led2:green"; - gpios = <&pioB 2 1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; led2r { label = "led2:red"; - gpios = <&pioB 3 1>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; @@ -125,16 +125,16 @@ reset { label = "reset"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; linux,code = <0x100>; gpio-key,wakeup; }; mode { label = "mode"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; linux,code = <0x101>; gpio-key,wakeup; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 1582f484a867..3abebb75fc57 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -18,8 +18,12 @@ interrupt-parent = <&mic>; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 317300875f34..ccf9ea242f72 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Phontech MPA 1600"; @@ -62,7 +62,7 @@ monitor_mute { label = "Monitor mute"; - gpios = <&pioC 1 1>; + gpios = <&pioC 1 GPIO_ACTIVE_LOW>; linux,code = <113>; }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 37aa7487d4d8..4aac404608cb 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -21,8 +21,12 @@ }; cpus { - cpu@0 { + #address-cells = <0>; + #size-cells = <0>; + + cpu { compatible = "arm,arm1136jf-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99ba6e14ebf3..0bbeff2afd4d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -21,8 +21,13 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0x0>; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60deb52b..eeb734e25709 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -56,9 +56,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -66,6 +80,12 @@ &tpd12s015_pins >; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd58063..98505a2ef162 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2a5642882c8a..33a94509a292 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -28,13 +28,20 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; next-level-cache = <&L2>; + reg = <0x0>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; next-level-cache = <&L2>; + reg = <0x1>; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3dd7ff825828..9e8083ff6cd2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -34,11 +34,18 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a15"; + reg = <0x0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a15"; + reg = <0x1>; }; }; @@ -538,6 +545,7 @@ interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; + ti,timer-pwm; }; timer6: timer@4013a000 { @@ -574,6 +582,7 @@ reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; + ti,timer-pwm; }; timer10: timer@48086000 { @@ -581,6 +590,7 @@ reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; + ti,timer-pwm; }; timer11: timer@48088000 { diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index f0a8c2068ea7..533919e96eae 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -18,13 +18,13 @@ #size-cells = <1>; cpus { - #address-cells = <1>; + #address-cells = <0>; #size-cells = <0>; - cpu@0 { - compatible = "arm,1176jz-s"; + cpu { + compatible = "arm,arm1176jz-s"; + device_type = "cpu"; clock-frequency = <400000000>; - reg = <0>; d-cache-line-size = <32>; d-cache-size = <32768>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index daa962d191e6..ab3e80085511 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -18,13 +18,13 @@ #size-cells = <1>; cpus { - #address-cells = <1>; + #address-cells = <0>; #size-cells = <0>; - cpu@0 { - compatible = "arm,1176jz-s"; + cpu { + compatible = "arm,arm1176jz-s"; + device_type = "cpu"; cpu-clock = <&arm_clk>, "cpu"; - reg = <0>; d-cache-line-size = <32>; d-cache-size = <32768>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 387fedb58988..33ffabe9c4c8 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Ronetix pm9g45"; @@ -42,15 +42,15 @@ board { pinctrl_board_nand: nand0-board { atmel,pins = - <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; mmc { pinctrl_board_mmc: mmc0-board { atmel,pins = - <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */ }; }; }; @@ -64,7 +64,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 6 0>; + cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ nand-on-flash-bbt; pinctrl-0 = <&pinctrl_board_nand>; - gpios = <&pioD 3 0 - &pioC 14 0 + gpios = <&pioD 3 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; @@ -134,13 +134,13 @@ led0 { label = "led0"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; led1 { label = "led1"; - gpios = <&pioD 31 0>; + gpios = <&pioD 31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -152,13 +152,13 @@ right { label = "SW4"; - gpios = <&pioE 7 1>; + gpios = <&pioE 7 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "SW3"; - gpios = <&pioE 8 1>; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; linux,code = <103>; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 3329719a9412..02edd8965f8a 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -18,6 +18,8 @@ #size-cells = <0>; cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index f18aad35e8b3..a5e90f078aa9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -23,8 +23,11 @@ }; cpus { - cpu@0 { - compatible = "arm,xscale"; + #address-cells = <0>; + #size-cells = <0>; + cpu { + compatible = "marvell,xscale"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index fde2a337d1ff..4ff2019c0e30 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -37,12 +37,6 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; - - gic-cpuif@4 { - compatible = "arm,gic-cpuif"; - cpuif-id = <4>; - cpu = <&cpu0>; - }; }; timer { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts new file mode 100644 index 000000000000..09ea22c26359 --- /dev/null +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -0,0 +1,45 @@ +/* + * Reference Device Tree Source for the armadillo 800 eva board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7740.dtsi" + +/ { + model = "armadillo 800 eva reference"; + compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; + + chosen { + bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&i2c0 { + touchscreen: st1232@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + }; +}; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 798fa35c0005..24e930643821 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,8 +14,129 @@ compatible = "renesas,r8a7740"; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0x0>; }; }; + + gic: interrupt-controller@c2800000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xc2800000 0x1000>, + <0xc2000000 0x1000>; + }; + + /* irqpin0: IRQ0 - IRQ7 */ + irqpin0: irqpin@e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin1: IRQ8 - IRQ15 */ + irqpin1: irqpin@e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin2: IRQ16 - IRQ23 */ + irqpin2: irqpin@e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + /* irqpin3: IRQ24 - IRQ31 */ + irqpin3: irqpin@e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4 + 0 149 0x4>; + }; + + i2c0: i2c@fff20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xfff20000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 201 0x4 + 0 202 0x4 + 0 203 0x4 + 0 204 0x4>; + }; + + i2c1: i2c@e6c20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6c20000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 70 0x4 + 0 71 0x4 + 0 72 0x4 + 0 73 0x4>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index fe5c6f213271..7f146c6bf756 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -48,6 +48,23 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin@fe780010 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfe78001c 4>, + <0xfe780010 4>, + <0xfe780024 4>, + <0xfe780044 4>, + <0xfe780064 4>; + interrupt-parent = <&gic>; + interrupts = <0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4>; + sense-bitfield-width = <2>; + }; + i2c0: i2c@0xffc70000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7a1711027e41..339d9b11721c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -36,12 +36,6 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; - - gic-cpuif@4 { - compatible = "arm,gic-cpuif"; - cpuif-id = <4>; - cpu = <&cpu0>; - }; }; timer { diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi new file mode 100644 index 000000000000..527e3193817f --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -0,0 +1,173 @@ +/* + * Samsung S3C2416 pinctrl settings + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gph-0", "gph-1"; + samsung,pin-function = <2>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gph-8", "gph-9"; + samsung,pin-function = <2>; + }; + + uart1_data: uart1-data { + samsung,pins = "gph-2", "gph-3"; + samsung,pin-function = <2>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gph-10", "gph-11"; + samsung,pin-function = <2>; + }; + + uart2_data: uart2-data { + samsung,pins = "gph-4", "gph-5"; + samsung,pin-function = <2>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + uart3_data: uart3-data { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + extuart_clk: extuart-clk { + samsung,pins = "gph-12"; + samsung,pin-function = <2>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpe-14", "gpe-15"; + samsung,pin-function = <2>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpe-11", "gpe-12", "gpe-13"; + samsung,pin-function = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpe-5"; + samsung,pin-function = <2>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpe-6"; + samsung,pin-function = <2>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpe-7"; + samsung,pin-function = <2>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpe-8", "gpe-9", "gpe-10"; + samsung,pin-function = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpl-8"; + samsung,pin-function = <2>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpl-9"; + samsung,pin-function = <2>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <2>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gpl-1", "gpl-2", "gpl-3"; + samsung,pin-function = <2>; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts new file mode 100644 index 000000000000..ad1dd09c10eb --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK2416 board device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "s3c2416.dtsi" + +/ { + model = "SMDK2416"; + compatible = "samsung,s3c2416"; + + memory { + reg = <0x30000000 0x4000000>; + }; + + serial@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + }; + + serial@50004000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + }; + + serial@50008000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + }; + + serial@5000C000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + }; + + watchdog@53000000 { + status = "okay"; + }; + + rtc@57000000 { + status = "okay"; + }; + + sdhci@4AC00000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; + }; + + sdhci@4A800000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi new file mode 100644 index 000000000000..6809324934a3 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -0,0 +1,79 @@ +/* + * Samsung's S3C2416 SoC device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "s3c24xx.dtsi" +/include/ "s3c2416-pinctrl.dtsi" + +/ { + model = "Samsung S3C2416 SoC"; + compatible = "samsung,s3c2416"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ejs"; + }; + }; + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2416-irq"; + }; + + pinctrl@56000000 { + compatible = "samsung,s3c2416-pinctrl"; + }; + + serial@50000000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50008000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@5000C000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x5000C000 0x4000>; + interrupts = <1 18 24 4>, <1 18 25 4>; + status = "disabled"; + }; + + sdhci@4AC00000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4AC00000 0x100>; + interrupts = <0 0 21 3>; + status = "disabled"; + }; + + sdhci@4A800000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4A800000 0x100>; + interrupts = <0 0 20 3>; + status = "disabled"; + }; + + watchdog@53000000 { + interrupts = <1 9 27 3>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2416-rtc"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2440-i2c"; + }; +}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi new file mode 100644 index 000000000000..cab46ff5fb4d --- /dev/null +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -0,0 +1,92 @@ +/* + * Samsung's S3C24XX family device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,s3c24xx"; + interrupt-parent = <&intc>; + + aliases { + pinctrl0 = &pinctrl_0; + }; + + intc:interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + pinctrl_0: pinctrl@56000000 { + reg = <0x56000000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c2410-wakeup-eint"; + interrupts = <0 0 0 3>, + <0 0 1 3>, + <0 0 2 3>, + <0 0 3 3>, + <0 0 4 4>, + <0 0 5 4>; + }; + }; + + timer@51000000 { + compatible = "samsung,s3c2410-pwm"; + reg = <0x51000000 0x1000>; + interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; + #pwm-cells = <4>; + }; + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupts = <1 28 0 4>, <1 28 1 4>; + status = "disabled"; + }; + + serial@50004000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + status = "disabled"; + }; + + serial@50008000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50008000 0x4000>; + interrupts = <1 15 6 4>, <1 15 7 4>; + status = "disabled"; + }; + + watchdog@53000000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x53000000 0x100>; + interrupts = <0 0 9 3>; + status = "disabled"; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupts = <0 0 30 3>, <0 0 8 3>; + status = "disabled"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2410-i2c"; + reg = <0x54000000 0x100>; + interrupts = <0 0 27 3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5000e0d42849..bbf88d722956 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -8,7 +8,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -35,8 +39,12 @@ ssc1 = &ssc1; }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a5"; + reg = <0x0>; }; }; @@ -59,8 +67,8 @@ mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; - interrupts = <21 4 0>; - dmas = <&dma0 2 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; @@ -74,7 +82,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -83,7 +91,7 @@ ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; - interrupts = <38 4 4>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -92,7 +100,7 @@ can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; - interrupts = <40 4 3>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; status = "disabled"; @@ -101,15 +109,15 @@ tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; - interrupts = <18 4 6>; - dmas = <&dma0 2 7>, - <&dma0 2 8>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; @@ -121,9 +129,9 @@ i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; - interrupts = <19 4 6>; - dmas = <&dma0 2 9>, - <&dma0 2 10>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -135,7 +143,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -144,7 +152,7 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; - interrupts = <13 4 5>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -153,7 +161,7 @@ macb0: ethernet@f0028000 { compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; - interrupts = <34 4 3>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; status = "disabled"; @@ -162,15 +170,15 @@ isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; - interrupts = <37 4 5>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; status = "disabled"; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; - interrupts = <22 4 0>; - dmas = <&dma1 2 0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; @@ -182,8 +190,8 @@ mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; - interrupts = <23 4 0>; - dmas = <&dma1 2 1>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; @@ -197,7 +205,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -206,7 +214,7 @@ ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; - interrupts = <39 4 4>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -215,7 +223,7 @@ can1: can@f8010000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8010000 0x300>; - interrupts = <41 4 3>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; }; @@ -223,13 +231,13 @@ tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; - interrupts = <27 4 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; }; adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg @@ -283,7 +291,7 @@ tsadcc: tsadcc@f8018000 { compatible = "atmel,at91sam9x5-tsadcc"; reg = <0xf8018000 0x4000>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; atmel,tsadcc_clock = <300000>; atmel,filtering_average = <0x03>; atmel,pendet_debounce = <0x08>; @@ -295,9 +303,9 @@ i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; - interrupts = <20 4 6>; - dmas = <&dma1 2 11>, - <&dma1 2 12>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; @@ -307,7 +315,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -316,7 +324,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -325,7 +333,7 @@ macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <35 4 3>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; status = "disabled"; @@ -334,7 +342,7 @@ sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { @@ -346,20 +354,20 @@ tdes@f803c000 { compatible = "atmel,sam9g46-tdes"; reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; - interrupts = <30 4 0>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; - interrupts = <31 4 0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -371,7 +379,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <2 4 7>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -403,202 +411,202 @@ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = - <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = - <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = - <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = - <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = - <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = - <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = - <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = - <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = - <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = - <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = - <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = - <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = - <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; can0 { pinctrl_can0_rx_tx: can0_rx_tx { atmel,pins = - <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ }; }; can1 { pinctrl_can1_rx_tx: can1_rx_tx { atmel,pins = - <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ - 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 30 0x1 0x0 /* PB30 periph A */ - 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ - 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ - 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; }; isi { pinctrl_isi: isi-0 { atmel,pins = - <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ - 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ - 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ - 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ - 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ - 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ - 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ - 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ - 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ - 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ - 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { atmel,pins = - <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ }; }; lcd { pinctrl_lcd: lcd-0 { atmel,pins = - <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ - 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ - 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ - 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ - 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ - 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ - 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ - 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ - 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ - 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ - 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ - 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ - 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ - 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ - 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ - 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ - 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ - 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ - 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ - 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ - 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ - 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ - 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ - 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ - 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ - 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ - 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ - 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ - 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ - 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ }; }; macb0 { pinctrl_macb0_data_rgmii: macb0_data_rgmii { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ - 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ - 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ - 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ - 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ - 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ - 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ - 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ }; pinctrl_macb0_data_gmii: macb0_data_gmii { atmel,pins = - <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ - 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ - 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ }; pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ - 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ }; pinctrl_macb0_signal_gmii: macb0_signal_gmii { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ - 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ }; }; @@ -606,252 +614,251 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ - 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ - 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ - 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ - 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ - 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ - 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ - 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ - 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = - <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ - 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ - 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ - 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ - 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = - <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ - 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ - 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ - 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ - 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = - <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ - 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ - 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; mmc2 { pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { atmel,pins = - <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ - 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = - <4 21 0x1 0x1 /* PE21 periph A with pullup */ - 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <6 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioB: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <7 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioC: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <8 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioD: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <9 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioE: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <10 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ - 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ - 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ - 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ - 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ - 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ - 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = - <2 16 0x1 0x0 /* PC16 periph A TK0 */ - 2 17 0x1 0x0 /* PC17 periph A TF0 */ - 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = - <2 19 0x1 0x0 /* PC19 periph A RK0 */ - 2 20 0x1 0x0 /* PC20 periph A RF0 */ - 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = - <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ - 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ - 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = - <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ - 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ - 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <3 17 0x1 0x0 /* PD17 periph A */ - 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = - <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ - 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 28 0x1 0x0 /* PB28 periph A */ - 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = - <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ - 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ - 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = - <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ - 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ - 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = - <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ - 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ }; }; + + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmc: pmc@fffffc00 { @@ -867,7 +874,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <3 4 5>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; }; watchdog@fffffe40 { @@ -879,7 +886,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; }; @@ -889,7 +896,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; - interrupts = <33 4 2>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; ep0 { @@ -1001,14 +1008,14 @@ usb1: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb2: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; @@ -1024,7 +1031,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; - interrupts = <5 4 6>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index fa5d216f1db7..027bac7510b6 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; @@ -41,7 +41,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c38c9433d7a5..99bd0c8e0471 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 6bebfcdcb1d1..fb8ee11cf282 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; @@ -51,7 +51,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index a488fc4e9777..509a53d9cc7b 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" +#include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; @@ -48,7 +48,7 @@ pb_user1 { label = "pb_user1"; - gpios = <&pioE 27 0>; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b336e7787cb3..1f8050813a54 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3.dtsi" +#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -89,7 +89,7 @@ d2 { label = "d2"; - gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 4b8830eb2060..1c296d6b2f2a 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -33,7 +33,7 @@ board { pinctrl_qt1070_irq: qt1070_irq { atmel,pins = - <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 661d7ca9c309..8a9e05d8a4b8 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3xcm.dtsi" +#include "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -20,7 +20,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 17 0>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; @@ -62,7 +62,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 18 0>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; @@ -87,32 +87,32 @@ board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = - <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = - <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = - <3 30 0x2 0x0>; /* PD30 periph B */ + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = - <4 24 0x0 0x0>; /* PE24 gpio */ + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = - <4 29 0x0 0x0>; /* PE29 gpio */ + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = - <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ }; }; }; @@ -127,7 +127,7 @@ }; usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioD 29 0>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -135,9 +135,9 @@ usb1: ohci@00600000 { num-ports = <3>; - atmel,vbus-gpio = <&pioD 25 0 - &pioD 26 1 - &pioD 27 1 + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW >; status = "okay"; }; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi index 677fc603f8b3..7bf020ecadf5 100644 --- a/arch/arm/boot/dts/sh7372.dtsi +++ b/arch/arm/boot/dts/sh7372.dtsi @@ -14,8 +14,13 @@ compatible = "renesas,sh7372"; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0x0>; }; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 5972abb55f9c..b6f759e830ed 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -18,6 +18,19 @@ model = "KZM-A9-GT"; compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + cpus { + cpu@0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1196000 1315000 + 598000 1175000 + 398667 1065000 + >; + voltage-tolerance = <1>; /* 1% */ + }; + }; + chosen { bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; }; @@ -59,6 +72,79 @@ }; }; +&i2c0 { + as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + vdd_dvfs: sd1 { + regulator-name = "1.315V CPU"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + sd2 { + regulator-name = "1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo3 { + regulator-name = "3.0V CPU"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + ldo4 { + regulator-name = "2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo5 { + regulator-name = "2.8V #2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo7 { + regulator-name = "1.15V CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + ldo8 { + regulator-name = "1.15V CPU #2"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + &mmcif { bus-width = <8>; vmmc-supply = <®_1p8v>; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index db5db24fd544..fb9dce529da6 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "dbx5x0.dtsi" +#include "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -82,7 +82,7 @@ }; }; - soc-u9500 { + soc { sound { compatible = "stericsson,snd-soc-mop500"; @@ -99,40 +99,13 @@ status = "okay"; }; - prcmu@80157000 { - thermal@801573c0 { - num-trips = <4>; - - trip0-temp = <70000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <75000>; - trip1-type = "active"; - trip1-cdev-num = <1>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - - trip2-temp = <80000>; - trip2-type = "active"; - trip2-cdev-num = <1>; - trip2-cdev-name0 = "thermal-cpufreq-0"; - - trip3-temp = <85000>; - trip3-type = "critical"; - trip3-cdev-num = <0>; - - status = "okay"; - }; - }; - external-bus@50000000 { status = "okay"; ethernet@0 { compatible = "smsc,lan9115"; reg = <0 0x10000>; - interrupts = <12 0x1>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio4>; vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; @@ -146,13 +119,21 @@ }; }; + vmmci: regulator-gpio { + gpios = <&gpio6 25 0x4>; + enable-gpio = <&gpio7 4 0x4>; + + status = "okay"; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; @@ -163,7 +144,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -197,15 +178,15 @@ }; i2c@80128000 { - lp5521@0x33 { + lp5521@33 { // compatible = "lp5521"; reg = <0x33>; }; - lp5521@0x34 { + lp5521@34 { // compatible = "lp5521"; reg = <0x34>; }; - bh1780@0x29 { + bh1780@29 { // compatible = "rohm,bh1780gli"; reg = <0x33>; }; @@ -298,6 +279,31 @@ }; }; + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + ab8500 { ab8500-gpio { compatible = "stericsson,ab8500-gpio"; @@ -316,7 +322,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -336,7 +342,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 16a6e13e08b4..bee62a2cf6d6 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -23,6 +23,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; serial1 = &uart1; timer0 = &timer0; @@ -94,6 +95,12 @@ compatible = "fixed-clock"; }; + f2s_periph_ref_clk: f2s_periph_ref_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <10000000>; + }; + main_pll: main_pll { #address-cells = <1>; #size-cells = <0>; @@ -235,16 +242,222 @@ reg = <0xD4>; }; }; + + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <4>; + }; + + mpu_l2_ram_clk: mpu_l2_ram_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <2>; + }; + + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + clk-gate = <0x60 0>; + }; + + l3_main_clk: l3_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + }; + + l3_mp_clk: l3_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 0 2>; + clk-gate = <0x60 1>; + }; + + l3_sp_clk: l3_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 2 2>; + }; + + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 4 3>; + clk-gate = <0x60 2>; + }; + + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 7 3>; + clk-gate = <0x60 3>; + }; + + dbg_at_clk: dbg_at_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 0 2>; + clk-gate = <0x60 4>; + }; + + dbg_clk: dbg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 2 2>; + clk-gate = <0x60 5>; + }; + + dbg_trace_clk: dbg_trace_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x6C 0 3>; + clk-gate = <0x60 6>; + }; + + dbg_timer_clk: dbg_timer_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + clk-gate = <0x60 7>; + }; + + cfg_clk: cfg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_s2f_usr0_clk>; + clk-gate = <0x60 8>; + }; + + s2f_user0_clk: s2f_user0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_s2f_usr0_clk>; + clk-gate = <0x60 9>; + }; + + emac_0_clk: emac_0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac0_clk>; + clk-gate = <0xa0 0>; + }; + + emac_1_clk: emac_1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac1_clk>; + clk-gate = <0xa0 1>; + }; + + usb_mp_clk: usb_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 2>; + div-reg = <0xa4 0 3>; + }; + + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 3>; + div-reg = <0xa4 3 3>; + }; + + can0_clk: can0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 4>; + div-reg = <0xa4 6 3>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 5>; + div-reg = <0xa4 9 3>; + }; + + gpio_db_clk: gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 6>; + div-reg = <0xa8 0 24>; + }; + + s2f_user1_clk: s2f_user1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&s2f_usr1_clk>; + clk-gate = <0xa0 7>; + }; + + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 8>; + }; + + nand_x_clk: nand_x_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 9>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 10>; + fixed-divider = <4>; + }; + + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; + clk-gate = <0xa0 11>; + }; }; }; - gmac0: stmmac@ff700000 { + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - phy-mode = "gmii"; + clocks = <&emac0_clk>; + clock-names = "stmmaceth"; + status = "disabled"; + }; + + gmac1: ethernet@ff702000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0xff702000 0x2000>; + interrupts = <0 120 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ + clocks = <&emac1_clk>; + clock-names = "stmmaceth"; + status = "disabled"; }; L2: l2-cache@fffef000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts index 2495958f1016..973999d2c697 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -32,6 +32,13 @@ reg = <0x0 0x40000000>; /* 1GB */ }; + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; + soc { clkmgr@ffd04000 { clocks { @@ -41,6 +48,12 @@ }; }; + ethernet@ff702000 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + status = "okay"; + }; + timer0@ffc08000 { clock-frequency = <100000000>; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 0bf035d607f0..d1ec0cab2dee 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -41,6 +41,11 @@ }; }; + ethernet@ff700000 { + phy-mode = "gmii"; + status = "okay"; + }; + timer0@ffc08000 { clock-frequency = <7000000>; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 45597fd91050..4382547df58a 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -22,12 +22,14 @@ cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index c2a852d43c48..f0e3fcf8e323 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -17,8 +17,12 @@ interrupt-parent = <&vic>; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 19f99dc4115e..9f60a7b6a42b 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -15,8 +15,12 @@ compatible = "st,spear600"; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 6f82d9368948..16c3888b7b15 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -22,6 +22,49 @@ }; }; + src@101e0000 { + /* These chrystal drivers are not used on this board */ + disable-sxtalo; + disable-mxtalo; + }; + + pinctrl { + /* Hog CD pins */ + pinctrl-names = "default"; + pinctrl-0 = <&cd_default_mode>; + + mmcsd-cd { + cd_default_mode: cd_default { + cd_default_cfg1 { + /* CD input GPIO */ + ste,pins = "GPIO111_H21"; + ste,input = <0>; + }; + cd_default_cfg2 { + /* CD GPIO biasing */ + ste,pins = "GPIO112_J21"; + ste,output = <0>; + }; + }; + }; + user-led { + user_led_default_mode: user_led_default { + user_led_default_cfg { + ste,pins = "GPIO2_C5"; + ste,output = <1>; + }; + }; + }; + user-button { + user_button_default_mode: user_button_default { + user_button_default_cfg { + ste,pins = "GPIO3_A4"; + ste,input = <0>; + }; + }; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ @@ -33,4 +76,30 @@ gpios = <&gpio3 16 0x1>; }; }; + + /* The user LED on the board is set up to be used for heartbeat */ + leds { + compatible = "gpio-leds"; + user-led { + label = "user_led"; + gpios = <&gpio0 2 0x1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_default_mode>; + }; + }; + + /* User key mapped in as "escape" */ + gpio-keys { + compatible = "gpio-keys"; + user-button { + label = "user_button"; + gpios = <&gpio0 3 0x1>; + linux,code = <1>; /* KEY_ESC */ + gpio-key,wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&user_button_default_mode>; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 4a4aab395141..a3acfa7b3dc9 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -21,18 +21,23 @@ cache-level = <2>; }; - mtu0 { + mtu0: mtu@101e2000 { /* Nomadik system timer */ + compatible = "st,nomadik-mtu"; reg = <0x101e2000 0x1000>; interrupt-parent = <&vica>; interrupts = <4>; + clocks = <&timclk>, <&pclk>; + clock-names = "timclk", "apb_pclk"; }; - mtu1 { + mtu1: mtu@101e3000 { /* Secondary timer */ reg = <0x101e3000 0x1000>; interrupt-parent = <&vica>; interrupts = <5>; + clocks = <&timclk>, <&pclk>; + clock-names = "timclk", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -45,6 +50,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + clocks = <&pclk>; }; gpio1: gpio@101e5000 { @@ -57,6 +63,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + clocks = <&pclk>; }; gpio2: gpio@101e6000 { @@ -69,6 +76,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + clocks = <&pclk>; }; gpio3: gpio@101e7000 { @@ -81,10 +89,544 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + clocks = <&pclk>; }; pinctrl { - compatible = "stericsson,nmk-pinctrl-stn8815"; + compatible = "stericsson,stn8815-pinctrl"; + /* Pin configurations */ + uart0 { + uart0_default_mux: uart0_mux { + u0_default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + }; + }; + uart1 { + uart1_default_mux: uart1_mux { + u1_default_mux { + ste,function = "u1"; + ste,pins = "u1_a_1"; + }; + }; + }; + mmcsd { + mmcsd_default_mux: mmcsd_mux { + mmcsd_default_mux { + ste,function = "mmcsd"; + ste,pins = "mmcsd_a_1"; + }; + }; + mmcsd_default_mode: mmcsd_default { + mmcsd_default_cfg1 { + /* MCCLK */ + ste,pins = "GPIO8_B10"; + ste,output = <0>; + }; + mmcsd_default_cfg2 { + /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ + ste,pins = "GPIO10_C11", "GPIO15_A12", + "GPIO16_C13"; + ste,output = <1>; + }; + mmcsd_default_cfg3 { + /* MCCMD, MCDAT3-0, MCMSFBCLK */ + ste,pins = "GPIO9_A10", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", + "GPIO14_B12", "GPIO24_C15"; + ste,input = <1>; + }; + }; + }; + i2c0 { + i2c0_default_mode: i2c0_default { + i2c0_default_cfg { + ste,pins = "GPIO62_D3", "GPIO63_D2"; + ste,input = <1>; + }; + }; + }; + i2c1 { + i2c1_default_mode: i2c1_default { + i2c1_default_cfg { + ste,pins = "GPIO53_L4", "GPIO54_L3"; + ste,input = <1>; + }; + }; + }; + i2c2 { + i2c2_default_mode: i2c2_default { + i2c2_default_cfg { + ste,pins = "GPIO73_C21", "GPIO74_C20"; + ste,input = <1>; + }; + }; + }; + }; + + src: src@101e0000 { + compatible = "stericsson,nomadik-src"; + reg = <0x101e0000 0x1000>; + disable-sxtalo; + disable-mxtalo; + + /* + * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz + * that is parent of TIMCLK, PLL1 and PLL2 + */ + mxtal: mxtal@19.2M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + /* + * The 2.4 MHz TIMCLK reference clock is active at + * boot time, this is actually the MXTALCLK @19.2 MHz + * divided by 8. This clock is used by the timers and + * watchdog. See page 105 ff. + */ + timclk: timclk@2.4M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&mxtal>; + }; + + /* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */ + pll1: pll1@0 { + #clock-cells = <0>; + compatible = "st,nomadik-pll-clock"; + pll-id = <1>; + clocks = <&mxtal>; + }; + + /* HCLK divides the PLL1 with 1,2,3 or 4 */ + hclk: hclk@0 { + #clock-cells = <0>; + compatible = "st,nomadik-hclk-clock"; + clocks = <&pll1>; + }; + /* The PCLK domain uses HCLK right off */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&hclk>; + }; + + /* PLL2 is usually 864 MHz and divided into a few fixed rates */ + pll2: pll2@0 { + #clock-cells = <0>; + compatible = "st,nomadik-pll-clock"; + pll-id = <2>; + clocks = <&mxtal>; + }; + clk216: clk216@216M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk108: clk108@108M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&clk216>; + }; + clk72: clk72@72M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + /* The data sheet does not say how this is derived */ + clock-div = <12>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk48: clk48@48M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + /* The data sheet does not say how this is derived */ + clock-div = <18>; + clock-mult = <1>; + clocks = <&pll2>; + }; + clk27: clk27@27M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&clk108>; + }; + + /* This apparently exists as well */ + ulpiclk: ulpiclk@60M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + /* + * IP AMBA bus clocks, driving the bus side of the + * peripheral clocking, clock gates. + */ + + hclkdma0: hclkdma0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <0>; + clocks = <&hclk>; + }; + hclksmc: hclksmc@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <1>; + clocks = <&hclk>; + }; + hclksdram: hclksdram@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <2>; + clocks = <&hclk>; + }; + hclkdma1: hclkdma1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <3>; + clocks = <&hclk>; + }; + hclkclcd: hclkclcd@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <4>; + clocks = <&hclk>; + }; + pclkirda: pclkirda@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <5>; + clocks = <&pclk>; + }; + pclkssp: pclkssp@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <6>; + clocks = <&pclk>; + }; + pclkuart0: pclkuart0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <7>; + clocks = <&pclk>; + }; + pclksdi: pclksdi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <8>; + clocks = <&pclk>; + }; + pclki2c0: pclki2c0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <9>; + clocks = <&pclk>; + }; + pclki2c1: pclki2c1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <10>; + clocks = <&pclk>; + }; + pclkuart1: pclkuart1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <11>; + clocks = <&pclk>; + }; + pclkmsp0: pclkmsp0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <12>; + clocks = <&pclk>; + }; + hclkusb: hclkusb@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <13>; + clocks = <&hclk>; + }; + hclkdif: hclkdif@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <14>; + clocks = <&hclk>; + }; + hclksaa: hclksaa@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <15>; + clocks = <&hclk>; + }; + hclksva: hclksva@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <16>; + clocks = <&hclk>; + }; + pclkhsi: pclkhsi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <17>; + clocks = <&pclk>; + }; + pclkxti: pclkxti@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <18>; + clocks = <&pclk>; + }; + pclkuart2: pclkuart2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <19>; + clocks = <&pclk>; + }; + pclkmsp1: pclkmsp1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <20>; + clocks = <&pclk>; + }; + pclkmsp2: pclkmsp2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <21>; + clocks = <&pclk>; + }; + pclkowm: pclkowm@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <22>; + clocks = <&pclk>; + }; + hclkhpi: hclkhpi@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <23>; + clocks = <&hclk>; + }; + pclkske: pclkske@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <24>; + clocks = <&pclk>; + }; + pclkhsem: pclkhsem@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <25>; + clocks = <&pclk>; + }; + hclk3d: hclk3d@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <26>; + clocks = <&hclk>; + }; + hclkhash: hclkhash@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <27>; + clocks = <&hclk>; + }; + hclkcryp: hclkcryp@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <28>; + clocks = <&hclk>; + }; + pclkmshc: pclkmshc@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <29>; + clocks = <&pclk>; + }; + hclkusbm: hclkusbm@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <30>; + clocks = <&hclk>; + }; + hclkrng: hclkrng@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <31>; + clocks = <&hclk>; + }; + + /* IP kernel clocks */ + clcdclk: clcdclk@0 { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <36>; + clocks = <&clk72 &clk48>; + }; + irdaclk: irdaclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <37>; + clocks = <&clk48>; + }; + sspiclk: sspiclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <38>; + clocks = <&clk48>; + }; + uart0clk: uart0clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <39>; + clocks = <&clk48>; + }; + sdiclk: sdiclk@48M { + /* Also called MCCLK in some documents */ + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <40>; + clocks = <&clk48>; + }; + i2c0clk: i2c0clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <41>; + clocks = <&clk48>; + }; + i2c1clk: i2c1clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <42>; + clocks = <&clk48>; + }; + uart1clk: uart1clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <43>; + clocks = <&clk48>; + }; + mspclk0: mspclk0@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <44>; + clocks = <&clk48>; + }; + usbclk: usbclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <45>; + clocks = <&clk48>; /* 48 MHz not ULPI */ + }; + difclk: difclk@72M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <46>; + clocks = <&clk72>; + }; + ipi2cclk: ipi2cclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <47>; + clocks = <&clk48>; /* Guess */ + }; + ipbmcclk: ipbmcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <48>; + clocks = <&clk48>; /* Guess */ + }; + hsiclkrx: hsiclkrx@216M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <49>; + clocks = <&clk216>; + }; + hsiclktx: hsiclktx@108M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <50>; + clocks = <&clk108>; + }; + uart2clk: uart2clk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <51>; + clocks = <&clk48>; + }; + mspclk1: mspclk1@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <52>; + clocks = <&clk48>; + }; + mspclk2: mspclk2@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <53>; + clocks = <&clk48>; + }; + owmclk: owmclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <54>; + clocks = <&clk48>; /* Guess */ + }; + skeclk: skeclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <56>; + clocks = <&clk48>; /* Guess */ + }; + x3dclk: x3dclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <58>; + clocks = <&clk48>; /* Guess */ + }; + pclkmsp3: pclkmsp3@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <59>; + clocks = <&pclk>; + }; + mspclk3: mspclk3@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <60>; + clocks = <&clk48>; + }; + mshcclk: mshcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <61>; + clocks = <&clk48>; /* Guess */ + }; + usbmclk: usbmclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <62>; + /* Stated as "48 MHz not ULPI clock" */ + clocks = <&clk48>; + }; + rngcclk: rngcclk@48M { + #clock-cells = <0>; + compatible = "st,nomadik-src-clock"; + clock-id = <63>; + clocks = <&clk48>; /* Guess */ + }; }; /* A NAND flash of 128 MiB */ @@ -97,6 +639,7 @@ <0x41000000 0x2000>, /* NAND Base ADDR */ <0x40800000 0x2000>; /* NAND Base CMD */ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + clocks = <&hclksmc>; status = "okay"; partition@0 { @@ -144,6 +687,8 @@ <&gpio1 30 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default_mode>; stw4811@2d { compatible = "st,stw4811"; @@ -158,6 +703,8 @@ <&gpio1 21 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default_mode>; camera@2d { compatible = "st,camera"; @@ -180,6 +727,9 @@ <&gpio2 9 0>; /* scl */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default_mode>; + stw4811@2d { compatible = "st,stw4811-usb"; reg = <0x2d>; @@ -211,6 +761,10 @@ reg = <0x101fd000 0x1000>; interrupt-parent = <&vica>; interrupts = <12>; + clocks = <&uart0clk>, <&pclkuart0>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_default_mux>; }; uart1: uart@101fb000 { @@ -218,6 +772,10 @@ reg = <0x101fb000 0x1000>; interrupt-parent = <&vica>; interrupts = <17>; + clocks = <&uart1clk>, <&pclkuart1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_default_mux>; }; uart2: uart@101f2000 { @@ -225,17 +783,23 @@ reg = <0x101f2000 0x1000>; interrupt-parent = <&vica>; interrupts = <28>; + clocks = <&uart2clk>, <&pclkuart2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; rng: rng@101b0000 { compatible = "arm,primecell"; reg = <0x101b0000 0x1000>; + clocks = <&rngcclk>, <&hclkrng>; + clock-names = "rng", "apb_pclk"; }; rtc: rtc@101e8000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x101e8000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; interrupt-parent = <&vica>; interrupts = <10>; }; @@ -243,6 +807,8 @@ mmcsd: sdi@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; + clocks = <&sdiclk>, <&pclksdi>; + clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; max-frequency = <48000000>; @@ -251,6 +817,8 @@ mmc-cap-sd-highspeed; cd-gpios = <&gpio3 15 0x1>; cd-inverted; + pinctrl-names = "default"; + pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; }; }; }; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 615392a75676..524e33240ad4 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -9,13 +9,15 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/interrupt-controller/irq.h> + / { - soc-u9500 { + soc { i2c@80004000 { stmpe1601: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; - interrupts = <26 0x2>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio6>; interrupt-controller; @@ -52,26 +54,26 @@ }; i2c@80110000 { - bu21013_tp@0x5c { - compatible = "rhom,bu21013_tp"; + bu21013_tp@5c { + compatible = "rohm,bu21013_tp"; reg = <0x5c>; touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; - rhom,touch-max-x = <384>; - rhom,touch-max-y = <704>; - rhom,flip-y; + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; }; - bu21013_tp@0x5d { - compatible = "rhom,bu21013_tp"; + bu21013_tp@5d { + compatible = "rohm,bu21013_tp"; reg = <0x5d>; touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; - rhom,touch-max-x = <384>; - rhom,touch-max-y = <704>; - rhom,flip-y; + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index b70fe0db6bb7..0e22a285dfe0 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -41,6 +41,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e7ef619a70a2..82e03d22f913 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -16,8 +16,12 @@ interrupt-parent = <&intc>; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a8"; + reg = <0x0>; }; }; @@ -173,8 +177,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; + interrupts = <28>; clocks = <&apb0_gates 5>; gpio-controller; + interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; @@ -199,6 +205,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -292,5 +319,32 @@ clocks = <&apb1_gates 23>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts new file mode 100644 index 000000000000..64dc0c42c43a --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a10s.dtsi" + +/ { + model = "Olimex A10s-Olinuxino Micro"; + compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; + + soc@01c20000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + pinctrl@01c20800 { + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PE3"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; + + green { + label = "a10s-olinuxino-micro:green:usr"; + gpios = <&pio 4 3 0>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi new file mode 100644 index 000000000000..2307ce827ae0 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + status = "disabled"; + }; + + mdio@01c0b080 { + compatible = "allwinner,sun4i-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun5i-a10s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB19", "PB20"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart2_pins_a: uart2@0 { + allwinner,pins = "PC18", "PC19"; + allwinner,function = "uart2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 3ca55067f868..80497e376706 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -37,6 +37,24 @@ pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 31fa38f8cc98..7363211daf84 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -17,8 +17,12 @@ interrupt-parent = <&intc>; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a8"; + reg = <0x0>; }; }; @@ -95,20 +99,15 @@ ahb_gates: ahb_gates@01c20060 { #clock-cells = <1>; - compatible = "allwinner,sun4i-ahb-gates-clk"; + compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", - "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", - "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", - "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", - "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", + "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", + "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; apb0: apb0@01c20054 { @@ -120,15 +119,13 @@ apb0_gates: apb0_gates@01c20068 { #clock-cells = <1>; - compatible = "allwinner,sun4i-apb0-gates-clk"; + compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; + clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - /* dummy is pll62 */ + /* dummy is pll6 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; @@ -145,15 +142,11 @@ apb1_gates: apb1_gates@01c2006c { #clock-cells = <1>; - compatible = "allwinner,sun4i-apb1-gates-clk"; + compatible = "allwinner,sun5i-a13-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", "apb1_scr", - "apb1_ps20", "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5", "apb1_uart6", - "apb1_uart7"; + "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; }; @@ -174,8 +167,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; + interrupts = <28>; clocks = <&apb0_gates 5>; gpio-controller; + interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; @@ -193,6 +188,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -226,5 +242,32 @@ clocks = <&apb1_gates 19>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 72c1f27af7f3..cb640eb6c932 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra114.dtsi" +#include "tegra114.dtsi" / { model = "NVIDIA Tegra114 Dalmore evaluation board"; @@ -727,6 +727,16 @@ battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <100>; + power-supplies = <&charger>; + }; + + rt5640: rt5640 { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; }; @@ -748,7 +758,7 @@ compatible = "ti,tps65090"; reg = <0x48>; interrupt-parent = <&gpio>; - interrupts = <72 0x04>; /* gpio PJ0 */ + interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>; vsys1-supply = <&vdd_ac_bat_reg>; vsys2-supply = <&vdd_ac_bat_reg>; @@ -763,6 +773,11 @@ vsys-l1-supply = <&vdd_ac_bat_reg>; vsys-l2-supply = <&vdd_ac_bat_reg>; + charger: charger { + compatible = "ti,tps65090-charger"; + ti,enable-low-current-chrg; + }; + regulators { tps65090_dcdc1_reg: dcdc1 { regulator-name = "vdd-sys-5v0"; @@ -823,12 +838,28 @@ }; }; + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + pmc { nvidia,invert-interrupt; }; + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000400 { - cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; @@ -873,7 +904,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; enable-active-high; - gpio = <&gpio 61 0>; /* GPIO PH5 */ + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; lcd_bl_en_reg: regulator@2 { @@ -883,7 +914,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 58 0>; /* GPIO PH2 */ + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@3 { @@ -893,7 +924,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 108 0>; /* GPIO PN4 */ + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -905,7 +936,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 86 0>; /* GPIO PK6 */ + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -917,8 +948,32 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 81 0>; /* GPIO PK1 */ + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-dalmore", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Dalmore"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA114_CLK_PLL_A>, + <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA114_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 6bbc8efae9c0..d5f8d3e0bde2 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra114.dtsi" +#include "tegra114.dtsi" / { model = "NVIDIA Tegra114 Pluto evaluation board"; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 629415ffd8dc..abf6c40d28c6 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra114-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra114"; @@ -19,19 +23,20 @@ <0x50042000 0x1000>, <0x50044000 0x2000>, <0x50046000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; timer@60005000 { compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04 - 0 121 0x04 - 0 122 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_TIMER>; }; tegra_car: clock { @@ -43,39 +48,39 @@ apbdma: dma { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_APBDMA>; }; ahb: ahb { @@ -86,14 +91,14 @@ gpio: gpio { compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -118,57 +123,57 @@ compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; status = "disabled"; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA114_CLK_UARTA>; }; uartb: serial@70006040 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; status = "disabled"; - clocks = <&tegra_car 192>; + clocks = <&tegra_car TEGRA114_CLK_UARTB>; }; uartc: serial@70006200 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; status = "disabled"; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA114_CLK_UARTC>; }; uartd: serial@70006300 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; status = "disabled"; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA114_CLK_UARTD>; }; pwm: pwm { compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA114_CLK_PWM>; status = "disabled"; }; i2c@7000c000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>; + clocks = <&tegra_car TEGRA114_CLK_I2C1>; clock-names = "div-clk"; status = "disabled"; }; @@ -176,10 +181,10 @@ i2c@7000c400 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>; + clocks = <&tegra_car TEGRA114_CLK_I2C2>; clock-names = "div-clk"; status = "disabled"; }; @@ -187,10 +192,10 @@ i2c@7000c500 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>; + clocks = <&tegra_car TEGRA114_CLK_I2C3>; clock-names = "div-clk"; status = "disabled"; }; @@ -198,10 +203,10 @@ i2c@7000c700 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 103>; + clocks = <&tegra_car TEGRA114_CLK_I2C4>; clock-names = "div-clk"; status = "disabled"; }; @@ -209,10 +214,10 @@ i2c@7000d000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>; + clocks = <&tegra_car TEGRA114_CLK_I2C5>; clock-names = "div-clk"; status = "disabled"; }; @@ -220,11 +225,11 @@ spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA114_CLK_SBC1>; clock-names = "spi"; status = "disabled"; }; @@ -232,11 +237,11 @@ spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA114_CLK_SBC2>; clock-names = "spi"; status = "disabled"; }; @@ -244,11 +249,11 @@ spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA114_CLK_SBC3>; clock-names = "spi"; status = "disabled"; }; @@ -256,11 +261,11 @@ spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA114_CLK_SBC4>; clock-names = "spi"; status = "disabled"; }; @@ -268,11 +273,11 @@ spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 104>; + clocks = <&tegra_car TEGRA114_CLK_SBC5>; clock-names = "spi"; status = "disabled"; }; @@ -280,11 +285,11 @@ spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 105>; + clocks = <&tegra_car TEGRA114_CLK_SBC6>; clock-names = "spi"; status = "disabled"; }; @@ -292,22 +297,22 @@ rtc { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_RTC>; }; kbc { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 261>, <&clk32k_in>; + clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -322,35 +327,106 @@ nvidia,ahb = <&ahb>; }; + ahub { + compatible = "nvidia,tegra114-ahub"; + reg = <0x70080000 0x200>, + <0x70080200 0x100>, + <0x70081000 0x200>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 13>, <&apbdma 14>, + <&apbdma 29>; + clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>, + <&tegra_car TEGRA114_CLK_APBIF>, + <&tegra_car TEGRA114_CLK_I2S0>, + <&tegra_car TEGRA114_CLK_I2S1>, + <&tegra_car TEGRA114_CLK_I2S2>, + <&tegra_car TEGRA114_CLK_I2S3>, + <&tegra_car TEGRA114_CLK_I2S4>, + <&tegra_car TEGRA114_CLK_DAM0>, + <&tegra_car TEGRA114_CLK_DAM1>, + <&tegra_car TEGRA114_CLK_DAM2>, + <&tegra_car TEGRA114_CLK_SPDIF_IN>, + <&tegra_car TEGRA114_CLK_AMX>, + <&tegra_car TEGRA114_CLK_ADX>; + clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif_in", "amx", "adx"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70080300 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA114_CLK_I2S0>; + status = "disabled"; + }; + + tegra_i2s1: i2s@70080400 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080400 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA114_CLK_I2S1>; + status = "disabled"; + }; + + tegra_i2s2: i2s@70080500 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080500 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA114_CLK_I2S2>; + status = "disabled"; + }; + + tegra_i2s3: i2s@70080600 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080600 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA114_CLK_I2S3>; + status = "disabled"; + }; + + tegra_i2s4: i2s@70080700 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080700 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA114_CLK_I2S4>; + status = "disabled"; + }; + }; + sdhci@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; status = "disable"; }; sdhci@78000200 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC2>; status = "disable"; }; sdhci@78000400 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC3>; status = "disable"; }; sdhci@78000600 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC4>; status = "disable"; }; @@ -385,9 +461,14 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index a573b94b7c93..2fcb3f2ca160 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Toradex Colibri T20 512MB"; @@ -14,7 +14,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&i2c_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -217,7 +218,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -443,17 +444,25 @@ ac97: ac97 { status = "okay"; - nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ - nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */ + nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) + GPIO_ACTIVE_HIGH>; }; usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; sdhci@c8000600 { - cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; }; clocks { @@ -483,7 +492,9 @@ nvidia,ac97-controller = <&ac97>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; @@ -510,7 +521,7 @@ enable-active-high; regulator-boot-on; regulator-always-on; - gpio = <&gpio 217 0>; + gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index e7d5de4e00b9..d9f89cd879a7 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -262,7 +263,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -290,7 +291,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -428,32 +429,43 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <8>; }; @@ -475,7 +487,7 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -618,7 +630,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -627,7 +639,7 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -637,7 +649,7 @@ regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - gpio = <&pmic 2 0>; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; enable-active-high; /* Hack until board-harmony-pcie.c is removed */ status = "disabled"; @@ -649,7 +661,7 @@ regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 22 0>; /* gpio PC6 */ + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -659,7 +671,7 @@ regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 176 0>; /* gpio PW0 */ + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -682,12 +694,17 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ - - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) + GPIO_ACTIVE_HIGH>; + nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) + GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 52f1103907d7..f2222bd74eab 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-colibri-512.dtsi" +#include "tegra20-colibri-512.dtsi" / { model = "Toradex Colibri T20 512MB on Iris"; @@ -38,13 +38,20 @@ usb@c5000000 { status = "okay"; - dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; }; usb@c5008000 { status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + serial@70006000 { status = "okay"; }; @@ -73,7 +80,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; regulator-always-on; - gpio = <&gpio 178 0>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; }; vcc_sd_reg: regulator@1 { diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index ace23437da89..7580578903cf 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Medcom-Wide board"; @@ -15,7 +15,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -56,10 +56,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index e3e0c9977df4..cfd12763b1b2 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -270,13 +271,14 @@ nvec { compatible = "nvidia,nvec"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <80000>; - request-gpios = <&gpio 170 0>; /* gpio PV2 */ + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; - clocks = <&tegra_car 67>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; }; @@ -287,7 +289,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -427,24 +429,35 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 1>; /* gpio PV5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 169 0>; /* gpio PV1 */ + cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -472,7 +485,7 @@ power { label = "Power"; - gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -483,7 +496,7 @@ wifi { label = "wifi-led"; - gpios = <&gpio 24 0>; /* gpio PD0 */ + gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; linux,default-trigger = "rfkill0"; }; }; @@ -520,9 +533,12 @@ nvidia,audio-codec = <&alc5632>; nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 1a17cc30bb9d..d7a358a6a647 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Plutux board"; @@ -17,7 +17,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -50,10 +50,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index cee4c34010fe..ab177b406b78 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -313,7 +314,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -328,14 +329,14 @@ compatible = "isil,isl29018"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <202 0x04>; /* GPIO PZ2 */ + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; }; gyrometer@68 { compatible = "invn,mpu3050"; reg = <0x68>; interrupt-parent = <&gpio>; - interrupts = <204 0x04>; /* gpio PZ4 */ + interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -388,7 +389,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -511,7 +512,7 @@ compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; - interrupts = <109 0x04>; /* gpio PN5 */ + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -565,35 +566,48 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; dr_mode = "otg"; }; usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { status = "okay"; - power-gpios = <&gpio 86 0>; /* gpio PK6 */ + power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -621,14 +635,14 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; lid { label = "Lid"; - gpios = <&gpio 23 0>; /* gpio PC7 */ + gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -795,7 +809,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -804,9 +818,18 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_vbus_wup1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 24 0>; /* PD0 */ + }; }; sound { @@ -827,10 +850,12 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 50b3ec16b93a..c54faae7cfb3 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Avionic Design Tamonten SOM"; @@ -14,7 +14,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -321,7 +322,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -470,9 +471,13 @@ status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + sdhci@c8000600 { - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 742f0b38d21d..c572c43751b1 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20-tamonten.dtsi" +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Tamonten Evaluation Carrier"; @@ -17,7 +17,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -50,10 +50,13 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9cc78a15d739..170159910455 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -311,20 +312,32 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; }; usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { @@ -334,8 +347,8 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 1>; /* gpio PP1 */ - wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -357,7 +370,7 @@ power { label = "Power"; - gpios = <&gpio 190 1>; /* gpio PX6, active low */ + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -365,7 +378,7 @@ poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio 191 1>; /* gpio PX7, active low */ + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; regulators { @@ -390,6 +403,15 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 170 0>; /* PV2 */ + }; }; sound { @@ -397,7 +419,9 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index dd38f1f03834..7f8c28d1121f 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -310,7 +311,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <187 0x04>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -325,7 +326,7 @@ compatible = "isil,isl29018"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <202 0x04>; /*gpio PZ2 */ + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -371,7 +372,7 @@ pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ti,system-power-controller; @@ -505,31 +506,42 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { status = "okay"; - power-gpios = <&gpio 86 0>; /* gpio PK6 */ + power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -557,7 +569,7 @@ power { label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; @@ -583,7 +595,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 0>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; regulator@2 { @@ -592,7 +604,7 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 0>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -602,7 +614,7 @@ regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 22 0>; /* gpio PC6 */ + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -612,7 +624,7 @@ regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpio 176 0>; /* gpio PW0 */ + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -635,12 +647,16 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) + GPIO_ACTIVE_HIGH>; + nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index d2567f83aaff..ea078ab8edeb 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra20.dtsi" +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; @@ -18,7 +18,8 @@ pll-supply = <&hdmi_pll_reg>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; }; }; @@ -281,7 +282,7 @@ max8907@3c { compatible = "maxim,max8907"; reg = <0x3c>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; maxim,system-power-controller; @@ -508,18 +509,28 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>; + }; + + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus1_reg>; }; usb@c5008000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>; + }; + + usb-phy@c5008000 { + status = "okay"; + vbus-supply = <&vbus3_reg>; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; bus-width = <8>; }; @@ -568,6 +579,24 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + vbus1_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + vbus3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vbus3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; }; sound { @@ -584,7 +613,9 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; - clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 56a91106041b..9653fd8288d2 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra20-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra20"; @@ -15,9 +19,9 @@ host1x { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; - interrupts = <0 65 0x04 /* mpcore syncpt */ - 0 67 0x04>; /* mpcore general */ - clocks = <&tegra_car 28>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; #address-cells = <1>; #size-cells = <1>; @@ -27,49 +31,50 @@ mpe { compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; - interrupts = <0 68 0x04>; - clocks = <&tegra_car 60>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; }; vi { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car 100>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_VI>; }; epp { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; - interrupts = <0 70 0x04>; - clocks = <&tegra_car 19>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; }; isp { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; - interrupts = <0 71 0x04>; - clocks = <&tegra_car 23>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; }; gr2d { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; - interrupts = <0 72 0x04>; - clocks = <&tegra_car 21>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; - clocks = <&tegra_car 24>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; }; dc@54200000 { compatible = "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; - interrupts = <0 73 0x04>; - clocks = <&tegra_car 27>, <&tegra_car 121>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp1", "parent"; rgb { @@ -80,8 +85,9 @@ dc@54240000 { compatible = "nvidia,tegra20-dc"; reg = <0x54240000 0x00040000>; - interrupts = <0 74 0x04>; - clocks = <&tegra_car 26>, <&tegra_car 121>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; clock-names = "disp2", "parent"; rgb { @@ -92,8 +98,9 @@ hdmi { compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; - interrupts = <0 75 0x04>; - clocks = <&tegra_car 51>, <&tegra_car 117>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -101,15 +108,15 @@ tvo { compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; - interrupts = <0 76 0x04>; - clocks = <&tegra_car 102>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car 48>; + clocks = <&tegra_car TEGRA20_CLK_DSI>; status = "disabled"; }; }; @@ -117,8 +124,9 @@ timer@50004600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; - interrupts = <1 13 0x304>; - clocks = <&tegra_car 132>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA20_CLK_TWD>; }; intc: interrupt-controller { @@ -141,11 +149,11 @@ timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_TIMER>; }; tegra_car: clock { @@ -157,23 +165,23 @@ apbdma: dma { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_APBDMA>; }; ahb { @@ -184,13 +192,13 @@ gpio: gpio { compatible = "nvidia,tegra20-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -213,27 +221,27 @@ tegra_ac97: ac97 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; - interrupts = <0 81 0x04>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 12>; - clocks = <&tegra_car 3>; + clocks = <&tegra_car TEGRA20_CLK_AC97>; status = "disabled"; }; tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; - interrupts = <0 13 0x04>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 2>; - clocks = <&tegra_car 11>; + clocks = <&tegra_car TEGRA20_CLK_I2S1>; status = "disabled"; }; tegra_i2s2: i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; - interrupts = <0 3 0x04>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 18>; + clocks = <&tegra_car TEGRA20_CLK_I2S2>; status = "disabled"; }; @@ -248,9 +256,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA20_CLK_UARTA>; status = "disabled"; }; @@ -258,9 +266,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; - clocks = <&tegra_car 96>; + clocks = <&tegra_car TEGRA20_CLK_UARTB>; status = "disabled"; }; @@ -268,9 +276,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA20_CLK_UARTC>; status = "disabled"; }; @@ -278,9 +286,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA20_CLK_UARTD>; status = "disabled"; }; @@ -288,9 +296,9 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = <0 91 0x04>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 20>; - clocks = <&tegra_car 66>; + clocks = <&tegra_car TEGRA20_CLK_UARTE>; status = "disabled"; }; @@ -298,24 +306,25 @@ compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA20_CLK_PWM>; status = "disabled"; }; rtc { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_RTC>; }; i2c@7000c000 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C1>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -323,21 +332,22 @@ spi@7000c380 { compatible = "nvidia,tegra20-sflash"; reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 11>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 43>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; status = "disabled"; }; i2c@7000c400 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C2>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -345,10 +355,11 @@ i2c@7000c500 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -356,10 +367,11 @@ i2c@7000d000 { compatible = "nvidia,tegra20-i2c-dvc"; reg = <0x7000d000 0x200>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>, <&tegra_car 124>; + clocks = <&tegra_car TEGRA20_CLK_DVC>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -367,59 +379,59 @@ spi@7000d400 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA20_CLK_SBC1>; status = "disabled"; }; spi@7000d600 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; status = "disabled"; }; spi@7000d800 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA20_CLK_SBC3>; status = "disabled"; }; spi@7000da00 { compatible = "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA20_CLK_SBC4>; status = "disabled"; }; kbc { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; + clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -427,7 +439,7 @@ compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; iommu { @@ -446,89 +458,114 @@ usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; - interrupts = <0 20 0x04>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; nvidia,has-legacy-mode; - clocks = <&tegra_car 22>; + clocks = <&tegra_car TEGRA20_CLK_USBD>; nvidia,needs-double-reset; nvidia,phy = <&phy1>; status = "disabled"; }; - phy1: usb-phy@c5000400 { + phy1: usb-phy@c5000000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; + reg = <0xc5000000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; + clocks = <&tegra_car TEGRA20_CLK_USBD>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CLK_M>, + <&tegra_car TEGRA20_CLK_USBD>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <1>; + xcvr_lsrslew = <1>; + status = "disabled"; }; usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; - interrupts = <0 21 0x04>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "ulpi"; - clocks = <&tegra_car 58>; + clocks = <&tegra_car TEGRA20_CLK_USB2>; nvidia,phy = <&phy2>; status = "disabled"; }; - phy2: usb-phy@c5004400 { + phy2: usb-phy@c5004000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; + reg = <0xc5004000 0x4000>; phy_type = "ulpi"; - clocks = <&tegra_car 93>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car TEGRA20_CLK_USB2>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CDEV2>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; }; usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; - interrupts = <0 97 0x04>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; - clocks = <&tegra_car 59>; + clocks = <&tegra_car TEGRA20_CLK_USB3>; nvidia,phy = <&phy3>; status = "disabled"; }; - phy3: usb-phy@c5008400 { + phy3: usb-phy@c5008000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3c00>; + reg = <0xc5008000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car TEGRA20_CLK_USB3>, + <&tegra_car TEGRA20_CLK_PLL_U>, + <&tegra_car TEGRA20_CLK_CLK_M>, + <&tegra_car TEGRA20_CLK_USBD>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <2>; + xcvr_lsrslew = <2>; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC2>; status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC3>; status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_SDMMC4>; status = "disabled"; }; @@ -551,7 +588,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 56 0x04 - 0 57 0x04>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index b732f7c13a66..87c5f7b7c271 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1,13 +1,13 @@ /dts-v1/; -/include/ "tegra30.dtsi" +#include "tegra30.dtsi" / { model = "NVIDIA Tegra30 Beaver evaluation board"; compatible = "nvidia,beaver", "nvidia,tegra30"; memory { - reg = <0x80000000 0x80000000>; + reg = <0x80000000 0x7ff00000>; }; pinmux { @@ -116,6 +116,15 @@ status = "okay"; clock-frequency = <100000>; + rt5640: rt5640 { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>; + }; + tps62361 { compatible = "ti,tps62361"; reg = <0x60>; @@ -133,7 +142,7 @@ compatible = "ti,tps65911"; reg = <0x2d>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -264,9 +273,9 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -312,7 +321,7 @@ regulator-boot-on; regulator-always-on; enable-active-high; - gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; ddr_reg: regulator@2 { @@ -324,7 +333,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */ + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -337,7 +346,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 30 0>; /* gpio PD6 */ + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -348,7 +357,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -360,7 +369,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -374,7 +383,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */ + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v_in_reg>; }; @@ -387,8 +396,41 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 95 0>; /* gpio PL7 */ + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + gpled1 { + label = "LED1"; /* CR5A1 (blue) */ + gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; + }; + gpled2 { + label = "LED2"; /* CR4A2 (green) */ + gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-beaver", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Beaver"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index e392bd2dab9b..1082c5ed90d1 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra30-cardhu.dtsi" +#include "tegra30-cardhu.dtsi" /* This dts file support the cardhu A02 version of board */ @@ -22,7 +22,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; sys_3v3_reg: regulator@101 { @@ -34,7 +34,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@102 { @@ -44,7 +44,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -56,7 +56,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -68,7 +68,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pmic 2 0>; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; }; vdd_bl_reg: regulator@105 { @@ -80,13 +80,13 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 83 0>; /* GPIO PK3 */ + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; }; }; sdhci@78000400 { status = "okay"; - power-gpios = <&gpio 28 0>; /* gpio PD4 */ + power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index d0db6c7e774f..bf012bddaafb 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra30-cardhu.dtsi" +#include "tegra30-cardhu.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -22,7 +22,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; sys_3v3_reg: regulator@101 { @@ -34,7 +34,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@102 { @@ -44,7 +44,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -56,7 +56,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -68,7 +68,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pmic 8 0>; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; vdd_bl_reg: regulator@105 { @@ -80,7 +80,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 234 0>; /* GPIO PDD2 */ + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; vdd_bl2_reg: regulator@106 { @@ -92,13 +92,13 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 232 0>; /* GPIO PDD0 */ + gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; sdhci@78000400 { status = "okay"; - power-gpios = <&gpio 27 0>; /* gpio PD3 */ + power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 01b4c26fad96..f65b53d32416 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,4 +1,4 @@ -/include/ "tegra30.dtsi" +#include "tegra30.dtsi" /** * This file contains common DT entry for all fab version of Cardhu. @@ -146,7 +146,7 @@ compatible = "isil,isl29028"; reg = <0x44>; interrupt-parent = <&gpio>; - interrupts = <88 0x04>; /*gpio PL0 */ + interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -163,7 +163,7 @@ compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <179 0x04>; /* gpio PW3 */ + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -190,7 +190,7 @@ compatible = "ti,tps65911"; reg = <0x2d>; - interrupts = <0 86 0x4>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -318,9 +318,9 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; @@ -364,7 +364,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; enable-active-high; - gpio = <&gpio 220 0>; /* gpio PBB4 */ + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; vin-supply = <&vio_reg>; }; @@ -377,7 +377,7 @@ regulator-boot-on; regulator-always-on; enable-active-high; - gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; emmc_3v3_reg: regulator@3 { @@ -389,7 +389,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 25 0>; /* gpio PD1 */ + gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -400,7 +400,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 30 0>; /* gpio PD6 */ + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; }; pex_hvdd_3v3_reg: regulator@5 { @@ -410,7 +410,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 95 0>; /* gpio PL7 */ + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -421,7 +421,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&gpio 142 0>; /* gpio PR6 */ + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -432,7 +432,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&gpio 143 0>; /* gpio PR7 */ + gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -443,7 +443,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 144 0>; /* gpio PS0 */ + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -456,7 +456,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 24 0>; /* gpio PD0 */ + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -467,7 +467,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&gpio 94 0>; /* gpio PL6 */ + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -480,7 +480,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 92 0>; /* gpio PL4 */ + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; @@ -491,7 +491,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -515,10 +515,13 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; - clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 15ded605142a..d8783f0fae63 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1,4 +1,8 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/clock/tegra30-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" / { compatible = "nvidia,tegra30"; @@ -15,9 +19,9 @@ host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; - interrupts = <0 65 0x04 /* mpcore syncpt */ - 0 67 0x04>; /* mpcore general */ - clocks = <&tegra_car 28>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA30_CLK_HOST1X>; #address-cells = <1>; #size-cells = <1>; @@ -27,36 +31,36 @@ mpe { compatible = "nvidia,tegra30-mpe"; reg = <0x54040000 0x00040000>; - interrupts = <0 68 0x04>; - clocks = <&tegra_car 60>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_MPE>; }; vi { compatible = "nvidia,tegra30-vi"; reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car 164>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_VI>; }; epp { compatible = "nvidia,tegra30-epp"; reg = <0x540c0000 0x00040000>; - interrupts = <0 70 0x04>; - clocks = <&tegra_car 19>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EPP>; }; isp { compatible = "nvidia,tegra30-isp"; reg = <0x54100000 0x00040000>; - interrupts = <0 71 0x04>; - clocks = <&tegra_car 23>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_ISP>; }; gr2d { compatible = "nvidia,tegra30-gr2d"; reg = <0x54140000 0x00040000>; - interrupts = <0 72 0x04>; - clocks = <&tegra_car 21>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_GR2D>; }; gr3d { @@ -69,8 +73,9 @@ dc@54200000 { compatible = "nvidia,tegra30-dc"; reg = <0x54200000 0x00040000>; - interrupts = <0 73 0x04>; - clocks = <&tegra_car 27>, <&tegra_car 179>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP1>, + <&tegra_car TEGRA30_CLK_PLL_P>; clock-names = "disp1", "parent"; rgb { @@ -81,8 +86,9 @@ dc@54240000 { compatible = "nvidia,tegra30-dc"; reg = <0x54240000 0x00040000>; - interrupts = <0 74 0x04>; - clocks = <&tegra_car 26>, <&tegra_car 179>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP2>, + <&tegra_car TEGRA30_CLK_PLL_P>; clock-names = "disp2", "parent"; rgb { @@ -93,8 +99,9 @@ hdmi { compatible = "nvidia,tegra30-hdmi"; reg = <0x54280000 0x00040000>; - interrupts = <0 75 0x04>; - clocks = <&tegra_car 51>, <&tegra_car 189>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDMI>, + <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>; clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -102,15 +109,15 @@ tvo { compatible = "nvidia,tegra30-tvo"; reg = <0x542c0000 0x00040000>; - interrupts = <0 76 0x04>; - clocks = <&tegra_car 169>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car 48>; + clocks = <&tegra_car TEGRA30_CLK_DSIA>; status = "disabled"; }; }; @@ -118,8 +125,9 @@ timer@50004600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; - interrupts = <1 13 0xf04>; - clocks = <&tegra_car 214>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA30_CLK_TWD>; }; intc: interrupt-controller { @@ -142,13 +150,13 @@ timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; - interrupts = <0 0 0x04 - 0 1 0x04 - 0 41 0x04 - 0 42 0x04 - 0 121 0x04 - 0 122 0x04>; - clocks = <&tegra_car 5>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TIMER>; }; tegra_car: clock { @@ -160,39 +168,39 @@ apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_APBDMA>; }; ahb: ahb { @@ -203,14 +211,14 @@ gpio: gpio { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; - interrupts = <0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; @@ -235,9 +243,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = <0 36 0x04>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 8>; - clocks = <&tegra_car 6>; + clocks = <&tegra_car TEGRA30_CLK_UARTA>; status = "disabled"; }; @@ -245,9 +253,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = <0 37 0x04>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 9>; - clocks = <&tegra_car 160>; + clocks = <&tegra_car TEGRA30_CLK_UARTB>; status = "disabled"; }; @@ -255,9 +263,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = <0 46 0x04>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 10>; - clocks = <&tegra_car 55>; + clocks = <&tegra_car TEGRA30_CLK_UARTC>; status = "disabled"; }; @@ -265,9 +273,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = <0 90 0x04>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 19>; - clocks = <&tegra_car 65>; + clocks = <&tegra_car TEGRA30_CLK_UARTD>; status = "disabled"; }; @@ -275,9 +283,9 @@ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = <0 91 0x04>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 20>; - clocks = <&tegra_car 66>; + clocks = <&tegra_car TEGRA30_CLK_UARTE>; status = "disabled"; }; @@ -285,24 +293,25 @@ compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; - clocks = <&tegra_car 17>; + clocks = <&tegra_car TEGRA30_CLK_PWM>; status = "disabled"; }; rtc { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; - interrupts = <0 2 0x04>; - clocks = <&tegra_car 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_RTC>; }; i2c@7000c000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C1>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -310,10 +319,11 @@ i2c@7000c400 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C2>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -321,10 +331,11 @@ i2c@7000c500 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 67>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C3>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -332,10 +343,11 @@ i2c@7000c700 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 103>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C4>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -343,10 +355,11 @@ i2c@7000d000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 47>, <&tegra_car 182>; + clocks = <&tegra_car TEGRA30_CLK_I2C5>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -354,81 +367,81 @@ spi@7000d400 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA30_CLK_SBC1>; status = "disabled"; }; spi@7000d600 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA30_CLK_SBC2>; status = "disabled"; }; spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA30_CLK_SBC3>; status = "disabled"; }; spi@7000da00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA30_CLK_SBC4>; status = "disabled"; }; spi@7000dc00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 104>; + clocks = <&tegra_car TEGRA30_CLK_SBC5>; status = "disabled"; }; spi@7000de00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 105>; + clocks = <&tegra_car TEGRA30_CLK_SBC6>; status = "disabled"; }; kbc { compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; - interrupts = <0 85 0x04>; - clocks = <&tegra_car 36>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_KBC>; status = "disabled"; }; pmc { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; - clocks = <&tegra_car 218>, <&clk32k_in>; + clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; @@ -438,7 +451,7 @@ 0x7000f03c 0x1b4 0x7000f200 0x028 0x7000f284 0x17c>; - interrupts = <0 77 0x04>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; iommu { @@ -455,12 +468,19 @@ compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 0x70080200 0x100>; - interrupts = <0 103 0x04>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, - <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, - <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, - <&tegra_car 110>, <&tegra_car 162>; + clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>, + <&tegra_car TEGRA30_CLK_APBIF>, + <&tegra_car TEGRA30_CLK_I2S0>, + <&tegra_car TEGRA30_CLK_I2S1>, + <&tegra_car TEGRA30_CLK_I2S2>, + <&tegra_car TEGRA30_CLK_I2S3>, + <&tegra_car TEGRA30_CLK_I2S4>, + <&tegra_car TEGRA30_CLK_DAM0>, + <&tegra_car TEGRA30_CLK_DAM1>, + <&tegra_car TEGRA30_CLK_DAM2>, + <&tegra_car TEGRA30_CLK_SPDIF_IN>; clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", "i2s3", "i2s4", "dam0", "dam1", "dam2", "spdif_in"; @@ -472,7 +492,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - clocks = <&tegra_car 30>; + clocks = <&tegra_car TEGRA30_CLK_I2S0>; status = "disabled"; }; @@ -480,7 +500,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - clocks = <&tegra_car 11>; + clocks = <&tegra_car TEGRA30_CLK_I2S1>; status = "disabled"; }; @@ -488,7 +508,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - clocks = <&tegra_car 18>; + clocks = <&tegra_car TEGRA30_CLK_I2S2>; status = "disabled"; }; @@ -496,7 +516,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - clocks = <&tegra_car 101>; + clocks = <&tegra_car TEGRA30_CLK_I2S3>; status = "disabled"; }; @@ -504,7 +524,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - clocks = <&tegra_car 102>; + clocks = <&tegra_car TEGRA30_CLK_I2S4>; status = "disabled"; }; }; @@ -512,32 +532,32 @@ sdhci@78000000 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC1>; status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC2>; status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC4>; status = "disabled"; }; @@ -572,9 +592,9 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index 367a16dcd5ef..dabe232216b4 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9260"; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index dee9c571306b..0751a6a979a8 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao TNY A9263"; @@ -38,7 +38,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index e1ab64c72dba..8456d70bb42b 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9G20"; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index 296216058c11..de0c24f5210a 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9260"; @@ -20,4 +20,13 @@ memory { reg = <0x20000000 0x4000000>; }; + + ahb { + apb { + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index e70d229baef5..285977682cf3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -30,7 +30,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -93,7 +93,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -105,7 +105,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 6fe05ccb6203..290e60383baf 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao USB A9263"; @@ -43,10 +43,24 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; + spi0: spi@fffa4000 { + cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; }; nand0: nand@40000000 { @@ -107,7 +121,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 0>; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -119,7 +133,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index ad3eca17c436..5b0ffc1a0b24 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -28,39 +28,39 @@ user_led1 { label = "user_led1"; - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; }; /* * led already used by mother board but active as high * user_led2 { * label = "user_led2"; -* gpios = <&pioB 21 1>; +* gpios = <&pioB 21 GPIO_ACTIVE_LOW>; * }; */ user_led3 { label = "user_led3"; - gpios = <&pioB 22 1>; + gpios = <&pioB 22 GPIO_ACTIVE_LOW>; }; user_led4 { label = "user_led4"; - gpios = <&pioB 23 1>; + gpios = <&pioB 23 GPIO_ACTIVE_LOW>; }; red { label = "red"; - gpios = <&pioB 24 1>; + gpios = <&pioB 24 GPIO_ACTIVE_LOW>; }; orange { label = "orange"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; }; green { label = "green"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; }; }; @@ -71,25 +71,25 @@ user_pb1 { label = "user_pb1"; - gpios = <&pioB 25 1>; + gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; user_pb2 { label = "user_pb2"; - gpios = <&pioB 13 1>; + gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; user_pb3 { label = "user_pb3"; - gpios = <&pioA 26 1>; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; user_pb4 { label = "user_pb4"; - gpios = <&pioC 9 1>; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 2dacb16ce4ae..ec77cf8f9695 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,25 +6,9 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "usb_a9g20_common.dtsi" / { model = "Calao USB A9G20"; compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - i2c@0 { - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; - }; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi new file mode 100644 index 000000000000..0b3b36182fe5 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -0,0 +1,27 @@ +/* + * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" + +/ { + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + i2c@0 { + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; + }; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts new file mode 100644 index 000000000000..f8cb1b9a01c5 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_lpw.dts @@ -0,0 +1,31 @@ +/* + * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "usb_a9g20_common.dtsi" + +/ { + model = "Calao USB A9G20 Low Power"; + compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; + + ahb { + apb { + spi1: spi@fffcc000 { + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + mmc-slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + voltage-ranges = <3200 3400>; + spi-max-frequency = <25000000>; + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h new file mode 100644 index 000000000000..1ee681f7ce2f --- /dev/null +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -0,0 +1,810 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_VF610_PINFUNC_H +#define __DTS_VF610_PINFUNC_H + +/* + * The pin function ID for VF610 is a tuple of: + * <mux_reg input_reg mux_mode input_val> + */ + +#define ALT0 0x0 +#define ALT1 0x1 +#define ALT2 0x2 +#define ALT3 0x3 +#define ALT4 0x4 +#define ALT5 0x5 +#define ALT6 0x6 +#define ALT7 0x7 + + +#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 +#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 +#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0 +#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0 +#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0 +#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0 +#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0 +#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0 +#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0 +#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0 +#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0 +#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0 +#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1 +#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0 +#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0 +#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0 +#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0 +#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0 +#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0 +#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0 +#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0 +#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0 +#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0 +#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0 +#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0 +#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0 +#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0 +#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1 +#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0 +#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0 +#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0 +#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0 +#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0 +#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0 +#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0 +#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0 +#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0 +#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0 +#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0 +#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0 +#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0 +#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0 +#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0 +#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0 +#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0 +#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0 +#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0 +#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0 +#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0 +#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0 +#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0 +#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0 +#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0 +#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0 +#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0 +#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0 +#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0 +#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0 +#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0 +#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0 +#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0 +#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0 +#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0 +#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0 +#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0 +#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0 +#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0 +#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0 +#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0 +#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0 +#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0 +#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0 +#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0 +#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0 +#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0 +#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0 +#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0 +#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0 +#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0 +#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0 +#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0 +#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0 +#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0 +#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0 +#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0 +#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0 +#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0 +#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0 +#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0 +#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0 +#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0 +#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0 +#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0 +#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0 +#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0 +#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0 +#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0 +#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0 +#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0 +#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0 +#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0 +#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0 +#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0 +#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0 +#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0 +#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0 +#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0 +#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0 +#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0 +#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0 +#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0 +#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0 +#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0 +#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0 +#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0 +#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0 +#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0 +#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0 +#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0 +#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0 +#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0 +#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0 +#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0 +#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1 +#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0 +#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0 +#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0 +#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0 +#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0 +#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0 +#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1 +#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0 +#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0 +#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0 +#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0 +#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0 +#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1 +#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0 +#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0 +#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0 +#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0 +#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0 +#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0 +#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0 +#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1 +#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0 +#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0 +#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0 +#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0 +#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0 +#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0 +#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0 +#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1 +#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0 +#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0 +#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0 +#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0 +#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0 +#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0 +#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0 +#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0 +#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0 +#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0 +#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0 +#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0 +#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0 +#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0 +#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0 +#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0 +#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0 +#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0 +#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0 +#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0 +#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0 +#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0 +#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0 +#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0 +#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0 +#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0 +#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0 +#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0 +#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0 +#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0 +#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0 +#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0 +#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0 +#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0 +#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0 +#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0 +#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0 +#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0 +#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0 +#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0 +#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0 +#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1 +#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1 +#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0 +#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0 +#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0 +#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1 +#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0 +#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0 +#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0 +#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0 +#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2 +#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0 +#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1 +#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0 +#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0 +#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0 +#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0 +#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0 +#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0 +#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0 +#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0 +#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0 +#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0 +#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0 +#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0 +#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0 +#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0 +#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0 +#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0 +#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0 +#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0 +#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0 +#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0 +#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0 +#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1 +#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0 +#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0 +#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0 +#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0 +#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1 +#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0 +#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0 +#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0 +#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0 +#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1 +#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0 +#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0 +#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0 +#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1 +#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0 +#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0 +#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0 +#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2 +#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0 +#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0 +#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0 +#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0 +#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0 +#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0 +#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0 +#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0 +#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0 +#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0 +#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0 +#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0 +#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0 +#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0 +#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1 +#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0 +#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0 +#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1 +#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0 +#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0 +#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0 +#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0 +#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0 +#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0 +#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0 +#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1 +#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0 +#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0 +#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0 +#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0 +#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0 +#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0 +#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0 +#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1 +#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0 +#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0 +#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0 +#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0 +#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0 +#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0 +#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1 +#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0 +#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0 +#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0 +#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0 +#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0 +#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0 +#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0 +#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0 +#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0 +#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0 +#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0 +#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0 +#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0 +#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0 +#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1 +#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0 +#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0 +#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0 +#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0 +#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0 +#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0 +#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0 +#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0 +#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0 +#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0 +#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0 +#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0 +#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0 +#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0 +#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0 +#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0 +#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0 +#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0 +#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0 +#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0 +#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0 +#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0 +#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0 +#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0 +#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0 +#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1 +#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1 +#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0 +#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0 +#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0 +#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1 +#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1 +#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0 +#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0 +#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0 +#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1 +#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1 +#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0 +#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0 +#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0 +#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1 +#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1 +#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0 +#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0 +#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0 +#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1 +#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2 +#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0 +#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0 +#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0 +#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1 +#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0 +#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2 +#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0 +#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0 +#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0 +#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0 +#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1 +#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0 +#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0 +#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0 +#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0 +#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0 +#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0 +#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1 +#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0 +#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2 +#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0 +#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0 +#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0 +#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0 +#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0 +#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0 +#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1 +#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0 +#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0 +#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0 +#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0 +#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0 +#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0 +#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0 +#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0 +#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0 +#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0 +#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0 +#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0 +#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0 +#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0 +#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0 +#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0 +#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0 +#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0 +#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0 +#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0 +#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 +#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0 +#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0 +#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1 +#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0 +#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0 +#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0 +#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0 +#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0 +#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0 +#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1 +#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0 +#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0 +#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0 +#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0 +#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0 +#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0 +#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0 +#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0 +#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0 +#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0 +#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0 +#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0 +#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0 +#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0 +#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0 +#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0 +#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0 +#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0 +#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0 +#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0 +#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0 +#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0 +#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0 +#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1 +#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0 +#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1 +#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0 +#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0 +#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0 +#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0 +#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0 +#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1 +#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0 +#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1 +#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0 +#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0 +#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0 +#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0 +#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0 +#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0 +#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0 +#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0 +#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0 +#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0 +#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0 +#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0 +#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0 +#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0 +#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0 +#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0 +#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0 +#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0 +#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0 +#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2 +#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0 +#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0 +#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0 +#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0 +#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0 +#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0 +#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2 +#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0 +#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0 +#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0 +#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0 +#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0 +#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0 +#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2 +#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0 +#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0 +#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0 +#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0 +#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0 +#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2 +#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0 +#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0 +#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0 +#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2 +#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0 +#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0 +#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0 +#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0 +#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0 +#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2 +#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0 +#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0 +#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0 +#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0 +#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0 +#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0 +#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0 +#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0 +#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0 +#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0 +#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0 +#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0 +#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1 +#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0 +#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0 +#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0 +#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0 +#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0 +#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0 +#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0 +#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0 +#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0 +#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0 +#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0 +#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0 +#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1 +#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0 +#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0 +#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0 +#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0 +#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1 +#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0 +#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0 +#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0 +#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0 +#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0 +#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0 +#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0 +#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0 +#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0 +#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0 +#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1 +#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0 +#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0 +#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0 +#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0 +#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0 +#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0 +#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0 +#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0 +#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0 +#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0 +#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0 +#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0 +#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0 +#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0 +#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0 +#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0 +#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0 +#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0 +#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0 +#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0 +#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0 +#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0 +#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0 +#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0 +#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0 +#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0 +#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0 +#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0 +#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0 +#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0 +#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2 +#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1 +#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0 +#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0 +#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0 +#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0 +#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0 +#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0 +#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2 +#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1 +#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0 +#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0 +#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0 +#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0 +#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0 +#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0 +#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0 +#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1 +#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0 +#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0 +#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0 +#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0 +#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0 +#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2 +#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0 +#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0 +#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0 +#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0 +#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0 +#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0 +#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0 +#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0 +#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0 +#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0 +#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0 +#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0 +#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0 +#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0 +#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0 +#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0 +#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0 +#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0 +#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0 +#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0 +#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0 +#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0 +#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0 +#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0 +#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0 +#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0 +#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0 +#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0 +#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0 +#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0 +#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0 +#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0 +#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0 +#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0 +#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0 +#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0 +#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0 +#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0 +#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0 +#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0 +#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0 +#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0 +#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0 +#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0 +#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0 +#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0 +#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0 +#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0 +#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0 +#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0 +#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0 +#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0 +#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0 +#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0 +#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0 +#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1 +#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0 +#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0 +#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0 +#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0 +#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0 +#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0 +#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0 +#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0 +#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0 +#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0 +#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0 +#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0 +#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0 +#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0 +#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0 +#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0 +#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0 +#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0 +#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0 +#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0 +#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0 +#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0 +#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0 +#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0 +#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0 +#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0 +#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0 +#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0 +#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0 +#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0 +#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0 +#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0 +#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0 +#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0 +#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0 +#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0 +#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0 +#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0 +#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0 +#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0 +#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0 +#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0 +#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0 +#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0 +#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0 +#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0 +#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0 +#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0 +#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0 +#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0 +#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0 +#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0 +#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0 +#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0 +#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0 +#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0 +#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0 +#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0 +#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0 +#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0 +#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0 +#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0 +#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0 +#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0 +#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0 +#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0 +#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0 +#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0 +#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0 +#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0 +#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0 +#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0 +#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0 +#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0 +#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0 +#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0 +#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0 +#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0 +#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0 +#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0 +#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0 +#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0 +#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0 +#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0 +#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0 +#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0 +#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0 +#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0 +#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0 +#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0 +#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0 +#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3 +#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0 +#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0 +#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0 +#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0 +#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3 +#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0 +#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0 +#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0 +#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0 +#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0 +#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0 +#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0 +#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0 +#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0 +#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0 +#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0 +#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0 +#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0 +#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0 +#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0 +#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0 +#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0 +#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0 +#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0 +#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0 +#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0 +#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0 +#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0 +#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0 +#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0 +#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3 +#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0 +#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0 +#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0 +#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0 +#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3 +#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0 +#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0 +#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 + +#endif diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts new file mode 100644 index 000000000000..b3905f5bcaf9 --- /dev/null +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "VF610 Tower Board"; + compatible = "fsl,vf610-twr", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP1,115200"; + }; + + memory { + reg = <0x80000000 0x8000000>; + }; + + clocks { + audio_ext { + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + enet_ext { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_1>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1_1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi new file mode 100644 index 000000000000..e1eb7dadda80 --- /dev/null +++ b/arch/arm/boot/dts/vf610.dtsi @@ -0,0 +1,464 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "skeleton.dtsi" +#include "vf610-pinfunc.h" +#include <dt-bindings/clock/vf610-clock.h> + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + sxosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + fxosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + reg = <0x40000000 0x70000>; + ranges; + + intc: interrupt-controller@40002000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x40003000 0x1000>, + <0x40002100 0x100>; + }; + + L2: l2-cache@40006000 { + compatible = "arm,pl310-cache"; + reg = <0x40006000 0x1000>; + cache-unified; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + }; + + uart0: serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + interrupts = <0 61 0x00>; + clocks = <&clks VF610_CLK_UART0>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart1: serial@40028000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40028000 0x1000>; + interrupts = <0 62 0x04>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart2: serial@40029000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40029000 0x1000>; + interrupts = <0 63 0x04>; + clocks = <&clks VF610_CLK_UART2>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart3: serial@4002a000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x4002a000 0x1000>; + interrupts = <0 64 0x04>; + clocks = <&clks VF610_CLK_UART3>; + clock-names = "ipg"; + status = "disabled"; + }; + + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + interrupts = <0 86 0x04>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + status = "disabled"; + }; + + pit: pit@40037000 { + compatible = "fsl,vf610-pit"; + reg = <0x40037000 0x1000>; + interrupts = <0 39 0x04>; + clocks = <&clks VF610_CLK_PIT>; + clock-names = "pit"; + }; + + wdog@4003e000 { + compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; + reg = <0x4003e000 0x1000>; + clocks = <&clks VF610_CLK_WDT>; + clock-names = "wdog"; + }; + + qspi0: quadspi@40044000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-qspi"; + reg = <0x40044000 0x1000>; + interrupts = <0 24 0x04>; + clocks = <&clks VF610_CLK_QSPI0_EN>, + <&clks VF610_CLK_QSPI0>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + iomuxc: iomuxc@40048000 { + compatible = "fsl,vf610-iomuxc"; + reg = <0x40048000 0x1000>; + #gpio-range-cells = <3>; + + /* functions and groups pins */ + + dcu0 { + pinctrl_dcu0_1: dcu0grp_1 { + fsl,pins = < + VF610_PAD_PTB8__GPIO_30 0x42 + VF610_PAD_PTE0__DCU0_HSYNC 0x42 + VF610_PAD_PTE1__DCU0_VSYNC 0x42 + VF610_PAD_PTE2__DCU0_PCLK 0x42 + VF610_PAD_PTE4__DCU0_DE 0x42 + VF610_PAD_PTE5__DCU0_R0 0x42 + VF610_PAD_PTE6__DCU0_R1 0x42 + VF610_PAD_PTE7__DCU0_R2 0x42 + VF610_PAD_PTE8__DCU0_R3 0x42 + VF610_PAD_PTE9__DCU0_R4 0x42 + VF610_PAD_PTE10__DCU0_R5 0x42 + VF610_PAD_PTE11__DCU0_R6 0x42 + VF610_PAD_PTE12__DCU0_R7 0x42 + VF610_PAD_PTE13__DCU0_G0 0x42 + VF610_PAD_PTE14__DCU0_G1 0x42 + VF610_PAD_PTE15__DCU0_G2 0x42 + VF610_PAD_PTE16__DCU0_G3 0x42 + VF610_PAD_PTE17__DCU0_G4 0x42 + VF610_PAD_PTE18__DCU0_G5 0x42 + VF610_PAD_PTE19__DCU0_G6 0x42 + VF610_PAD_PTE20__DCU0_G7 0x42 + VF610_PAD_PTE21__DCU0_B0 0x42 + VF610_PAD_PTE22__DCU0_B1 0x42 + VF610_PAD_PTE23__DCU0_B2 0x42 + VF610_PAD_PTE24__DCU0_B3 0x42 + VF610_PAD_PTE25__DCU0_B4 0x42 + VF610_PAD_PTE26__DCU0_B5 0x42 + VF610_PAD_PTE27__DCU0_B6 0x42 + VF610_PAD_PTE28__DCU0_B7 0x42 + >; + }; + }; + + dspi0 { + pinctrl_dspi0_1: dspi0grp_1 { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp_1 { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + }; + + fec0 { + pinctrl_fec0_1: fec0grp_1 { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + }; + + fec1 { + pinctrl_fec1_1: fec1grp_1 { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + }; + + i2c0 { + pinctrl_i2c0_1: i2c0grp_1 { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x30d3 + VF610_PAD_PTB15__I2C0_SDA 0x30d3 + >; + }; + }; + + pwm0 { + pinctrl_pwm0_1: pwm0grp_1 { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + }; + + qspi0 { + pinctrl_qspi0_1: qspi0grp_1 { + fsl,pins = < + VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b + VF610_PAD_PTD1__QSPI0_A_CS0 0x307f + VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b + VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b + VF610_PAD_PTD8__QSPI0_B_CS0 0x307f + VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b + >; + }; + }; + + sai2 { + pinctrl_sai2_1: sai2grp_1 { + fsl,pins = < + VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed + VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee + VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed + VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed + VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed + VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed + VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp_1 { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + }; + + usbvbus { + pinctrl_usbvbus_1: usbvbusgrp_1 { + fsl,pins = < + VF610_PAD_PTA24__USB1_VBUS_EN 0x219c + VF610_PAD_PTA16__USB0_VBUS_EN 0x219c + >; + }; + }; + + }; + + gpio1: gpio@40049000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40049000 0x1000 0x400ff000 0x40>; + interrupts = <0 107 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + + gpio2: gpio@4004a000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004a000 0x1000 0x400ff040 0x40>; + interrupts = <0 108 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@4004b000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004b000 0x1000 0x400ff080 0x40>; + interrupts = <0 109 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@4004c000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; + interrupts = <0 110 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio5: gpio@4004d000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004d000 0x1000 0x400ff100 0x40>; + interrupts = <0 111 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 128 7>; + }; + + anatop@40050000 { + compatible = "fsl,vf610-anatop"; + reg = <0x40050000 0x1000>; + }; + + i2c0: i2c@40066000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + interrupts =<0 71 0x04>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + status = "disabled"; + }; + + clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40080000 0x80000>; + ranges; + + uart4: serial@400a9000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400a9000 0x1000>; + interrupts = <0 65 0x04>; + clocks = <&clks VF610_CLK_UART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart5: serial@400aa000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400aa000 0x1000>; + interrupts = <0 66 0x04>; + clocks = <&clks VF610_CLK_UART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + fec0: ethernet@400d0000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d0000 0x1000>; + interrupts = <0 78 0x04>; + clocks = <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + fec1: ethernet@400d1000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d1000 0x1000>; + interrupts = <0 79 0x04>; + clocks = <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 877b33afa7ed..87f33310e2bc 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -30,3 +30,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 4a4b96f6827e..51d0e912c8f5 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -11,6 +11,23 @@ / { compatible = "via,vt8500"; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -111,32 +128,36 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index edd2cec3d37f..e3e6b9eb09d0 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -30,3 +30,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b2bf359e852f..a1a854b8a454 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -12,11 +12,24 @@ compatible = "wm,wm8505"; cpus { - cpu@0 { - compatible = "arm,arm926ejs"; + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; }; }; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -68,6 +81,13 @@ clock-frequency = <25000000>; }; + plla: plla { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + pllb: pllb { #clock-cells = <0>; compatible = "via,vt8500-pll-clock"; @@ -75,6 +95,48 @@ reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x20c>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x350>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -163,46 +225,52 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; - uart@d8370000 { + uart4: serial@d8370000 { compatible = "via,vt8500-uart"; reg = <0xd8370000 0x1040>; interrupts = <31>; clocks = <&clkuart4>; + status = "disabled"; }; - uart@d8380000 { + uart5: serial@d8380000 { compatible = "via,vt8500-uart"; reg = <0xd8380000 0x1040>; interrupts = <30>; clocks = <&clkuart5>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index 61671a0d9ede..dd0d1b602388 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -32,3 +32,6 @@ }; }; +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index dd8464eeb40d..7525982262ac 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -11,6 +11,21 @@ / { compatible = "wm,wm8650"; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -77,6 +92,55 @@ reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x20c>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x210>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -93,14 +157,7 @@ enable-bit = <2>; }; - arm: arm { - #clock-cells = <0>; - compatible = "via,vt8500-device-clock"; - clocks = <&plla>; - divisor-reg = <0x300>; - }; - - sdhc: sdhc { + clksdhc: sdhc { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; clocks = <&pllb>; @@ -140,18 +197,20 @@ reg = <0xd8050400 0x100>; }; - uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts new file mode 100644 index 000000000000..37e4a408bf39 --- /dev/null +++ b/arch/arm/boot/dts/wm8750-apc8750.dts @@ -0,0 +1,30 @@ +/* + * wm8750-apc8750.dts + * - Device tree file for VIA APC8750 + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8750.dtsi" + +/ { + model = "VIA APC8750"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&i2c>; + + i2c: i2c { + wm,pins = <168 169 170 171>; + wm,function = <2>; /* alt */ + wm,pull = <2>; /* pull-up */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi new file mode 100644 index 000000000000..557a9c2ace49 --- /dev/null +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -0,0 +1,347 @@ +/* + * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8750"; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm1176ej-s"; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8750-pinctrl"; + reg = <0xd8110000 0x10000>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x20C>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x210>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <24>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <25>; + }; + + clkuart2: uart2 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <26>; + }; + + clkuart3: uart3 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <27>; + }; + + clkuart4: uart4 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <28>; + }; + + clkuart5: uart5 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <29>; + }; + + clkpwm: pwm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x350>; + enable-reg = <0x250>; + enable-bit = <17>; + }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x330>; + divisor-mask = <0x3f>; + enable-reg = <0x250>; + enable-bit = <0>; + }; + + clki2c0: i2c0clk { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x3A0>; + enable-reg = <0x250>; + enable-bit = <8>; + }; + + clki2c1: i2c1clk { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x3A4>; + enable-reg = <0x250>; + enable-bit = <9>; + }; + }; + }; + + pwm: pwm@d8220000 { + #pwm-cells = <3>; + compatible = "via,vt8500-pwm"; + reg = <0xd8220000 0x100>; + clocks = <&clkpwm>; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <26>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <26>; + }; + + uhci@d8008d00 { + compatible = "platform-uhci"; + reg = <0xd8008d00 0x200>; + interrupts = <26>; + }; + + uart0: serial@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&clkuart0>; + status = "disabled"; + }; + + uart1: serial@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&clkuart1>; + status = "disabled"; + }; + + uart2: serial@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&clkuart2>; + status = "disabled"; + }; + + uart3: serial@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&clkuart3>; + status = "disabled"; + }; + + uart4: serial@d8370000 { + compatible = "via,vt8500-uart"; + reg = <0xd8370000 0x1040>; + interrupts = <30>; + clocks = <&clkuart4>; + status = "disabled"; + }; + + uart5: serial@d8380000 { + compatible = "via,vt8500-uart"; + reg = <0xd8380000 0x1040>; + interrupts = <43>; + clocks = <&clkuart5>; + status = "disabled"; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + sdon-inverted; + }; + + i2c_0: i2c@d8280000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8280000 0x1000>; + interrupts = <19>; + clocks = <&clki2c0>; + clock-frequency = <400000>; + }; + + i2c_1: i2c@d8320000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8320000 0x1000>; + interrupts = <18>; + clocks = <&clki2c1>; + clock-frequency = <400000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index 32d22532cd6c..90e913fb64be 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -41,3 +41,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index fc790d0aee66..d98386dd2882 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -11,6 +11,17 @@ / { compatible = "wm,wm8850"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + }; + }; + aliases { serial0 = &uart0; serial1 = &uart1; @@ -72,18 +83,81 @@ plla: plla { #clock-cells = <0>; - compatible = "wm,wm8750-pll-clock"; - clocks = <&ref25>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; reg = <0x200>; }; pllb: pllb { #clock-cells = <0>; - compatible = "wm,wm8750-pll-clock"; - clocks = <&ref25>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; reg = <0x204>; }; + pllc: pllc { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x208>; + }; + + plld: plld { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x20c>; + }; + + plle: plle { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x210>; + }; + + pllf: pllf { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x214>; + }; + + pllg: pllg { + #clock-cells = <0>; + compatible = "wm,wm8850-pll-clock"; + clocks = <&ref24>; + reg = <0x218>; + }; + + clkarm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + clkahb: ahb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x304>; + }; + + clkapb: apb { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x320>; + }; + + clkddr: ddr { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plld>; + divisor-reg = <0x310>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -178,32 +252,36 @@ interrupts = <26>; }; - uart0: uart@d8200000 { + uart0: serial@d8200000 { compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; clocks = <&clkuart0>; + status = "disabled"; }; - uart1: uart@d82b0000 { + uart1: serial@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; clocks = <&clkuart1>; + status = "disabled"; }; - uart2: uart@d8210000 { + uart2: serial@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; clocks = <&clkuart2>; + status = "disabled"; }; - uart3: uart@d82c0000 { + uart3: serial@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; clocks = <&clkuart3>; + status = "disabled"; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 14fb2e609bab..6f54a64850eb 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -49,16 +49,20 @@ uart0: uart@e0000000 { compatible = "xlnx,xuartps"; + status = "disabled"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; - clocks = <&uart_clk 0>; }; uart1: uart@e0001000 { compatible = "xlnx,xuartps"; + status = "disabled"; + clocks = <&clkc 24>, <&clkc 41>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; - clocks = <&uart_clk 1>; }; slcr: slcr@f8000000 { @@ -69,50 +73,21 @@ #address-cells = <1>; #size-cells = <0>; - ps_clk: ps_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - /* clock-frequency set in board-specific file */ - clock-output-names = "ps_clk"; - }; - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x104 0x114>; - clock-output-names = "ddrpll"; - }; - iopll: iopll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x108 0x118>; - clock-output-names = "iopll"; - }; - uart_clk: uart_clk { - #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; - }; - cpu_clk: cpu_clk { + clkc: clkc { #clock-cells = <1>; - compatible = "xlnx,zynq-cpu-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x120 0x1C4>; - clock-output-names = "cpu_6x4x", - "cpu_3x2x", - "cpu_2x", - "cpu_1x"; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; }; }; }; @@ -121,9 +96,8 @@ interrupt-parent = <&intc>; interrupts = < 0 10 4 0 11 4 0 12 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; @@ -131,9 +105,8 @@ interrupt-parent = <&intc>; interrupts = < 0 37 4 0 38 4 0 39 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; scutimer: scutimer@f8f00600 { @@ -141,7 +114,7 @@ interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; reg = < 0xf8f00600 0x20 >; - clocks = <&cpu_clk 1>; + clocks = <&clkc 4>; } ; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 86f44d5b0265..21aea99a067b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -24,11 +24,11 @@ }; chosen { - bootargs = "console=ttyPS1,115200 earlyprintk"; + bootargs = "console=ttyPS0,115200 earlyprintk"; }; }; -&ps_clk { - clock-frequency = <33333330>; +&uart1 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts new file mode 100644 index 000000000000..79009e0b74b9 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZC706 Development Board"; + compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + }; + +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts new file mode 100644 index 000000000000..d6acf2b1cdf4 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Zed Development Board"; + compatible = "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + }; + +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 047f2a415309..75fd842d4071 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -42,6 +39,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -51,7 +51,8 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_93CX6=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -92,7 +91,23 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_DAVICOM_PHY=y CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTLWIFI=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192CU=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 @@ -112,13 +127,11 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SSB=m CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y @@ -146,16 +156,12 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=m -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_CDC=y +CONFIG_USB_AT91=y +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -164,20 +170,23 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set @@ -192,7 +201,7 @@ CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_ITU_T=y CONFIG_CRC7=m CONFIG_AVERAGE=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 4ae57a34a582..8b099349c4b1 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -1,10 +1,12 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100 # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_AT91_CF=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y -CONFIG_XFRM_USER=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_TUN=m +CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y -CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=y -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=y CONFIG_GPIO_SYSFS=y -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91RM9200_WATCHDOG=y @@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_REISERFS_FS=y +CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y +CONFIG_XZ_DEC_ARMTHUMB=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 892e8287ed73..69b6928d3d9d 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -11,7 +10,14 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y CONFIG_MACH_CPU9G20=y @@ -20,10 +26,10 @@ CONFIG_MACH_PORTUXG20=y CONFIG_MACH_STAMP9G20=y CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y -CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y CONFIG_LEDS=y @@ -33,12 +39,14 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set @@ -46,8 +54,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y @@ -56,6 +67,8 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -63,23 +76,36 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -94,12 +120,11 @@ CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -109,15 +134,12 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -125,3 +147,9 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_AT91_DEBUG_LL_DBGU0=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig deleted file mode 100644 index 05618eb694f8..000000000000 --- a/arch/arm/configs/at91sam9260_defconfig +++ /dev/null @@ -1,91 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_ARCH_AT91SAM9260_SAM9XE=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_MACH_CAM60=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_MACH_CPU9260=y -CONFIG_MACH_FLEXIBITY=y -CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM9_DT=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_9g10_defconfig index c87beb973b37..9d35cd81c611 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_9g10_defconfig @@ -17,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y +CONFIG_MACH_AT91SAM9G10EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -38,11 +39,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y -CONFIG_LIB80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y @@ -51,17 +52,13 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_USB_ZD1201=m CONFIG_RTL8187=m CONFIG_LIBERTAS=m @@ -118,15 +115,11 @@ CONFIG_SND_AT73C213=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y @@ -147,12 +140,10 @@ CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_FTRACE=y CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 36fed66bd4b5..e40026364e57 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,6 +1,4 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set -CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -17,7 +15,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y -CONFIG_MACH_USB_A9263=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -48,9 +45,11 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -65,7 +64,6 @@ CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y @@ -73,23 +71,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -98,6 +91,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -107,9 +101,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -124,16 +118,12 @@ CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set CONFIG_SND_USB_AUDIO=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=m @@ -145,22 +135,18 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_FUSE_FS=m +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_FTRACE=y +CONFIG_NLS_UTF8=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 18964cdacd68..08166cd4e7d6 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -23,8 +22,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -36,6 +33,9 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -45,9 +45,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -CONFIG_CFG80211=y -CONFIG_LIB80211=y -CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -61,13 +58,14 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -76,67 +74,40 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y CONFIG_DAVICOM_PHY=y -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AT76C50X_USB=m -CONFIG_USB_ZD1201=m -CONFIG_RTL8187=m -CONFIG_ATH_COMMON=m -CONFIG_ATH9K=m -CONFIG_CARL9170=m -CONFIG_B43=m -CONFIG_B43_PHY_N=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -CONFIG_RT2X00=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RTL8192CU=m -CONFIG_WL1251=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX_MENU=m -CONFIG_WL12XX=m -CONFIG_WL12XX_SDIO=m -CONFIG_ZD1211RW=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_QT2160=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATMEL=y -CONFIG_FB_UDL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_BACKLIGHT_ATMEL_PWM=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -148,33 +119,25 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_ARM is not set CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_MULTI=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_MULTI=y CONFIG_USB_G_MULTI_CDC=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_LEDS_ATMEL_PWM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y @@ -184,17 +147,14 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y @@ -203,6 +163,8 @@ CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6ec010f248b5..06686e7303a9 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -37,6 +37,8 @@ CONFIG_MACH_IMX51_DT=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y CONFIG_MXC_PWM=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y @@ -47,6 +49,7 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m +CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y CONFIG_PM_TEST_SUSPEND=y CONFIG_NET=y @@ -170,6 +173,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y @@ -182,6 +186,7 @@ CONFIG_SND_SOC=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y @@ -208,10 +213,15 @@ CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_IMX=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index b01e7632ed2e..35f8cf299fa2 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -81,6 +81,7 @@ CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set @@ -96,6 +97,11 @@ CONFIG_DEBUG_GPIO=y CONFIG_MMC=y CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 4d0dc3c16063..f6e78f83c3c3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -26,7 +26,9 @@ CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -39,6 +41,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -68,6 +73,8 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -95,7 +102,19 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_RTL8187=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -133,9 +152,13 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=y -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ATMELMCI=y @@ -151,18 +174,18 @@ CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h index 968c0a14e0a3..209e6504922e 100644 --- a/arch/arm/include/asm/percpu.h +++ b/arch/arm/include/asm/percpu.h @@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off) static inline unsigned long __my_cpu_offset(void) { unsigned long off; - /* Read TPIDRPRW */ - asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + register unsigned long *sp asm ("sp"); + + /* + * Read TPIDRPRW. + * We want to allow caching the value, so avoid using volatile and + * instead use a fake stack read to hazard against barrier(). + */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp)); + return off; } #define __my_cpu_offset __my_cpu_offset() diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 91d38e38a0b4..29da84e183f4 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -65,6 +65,14 @@ #define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR #define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6SL_UART1_BASE_ADDR 0x02020000 +#define IMX6SL_UART2_BASE_ADDR 0x02024000 +#define IMX6SL_UART3_BASE_ADDR 0x02034000 +#define IMX6SL_UART4_BASE_ADDR 0x02038000 +#define IMX6SL_UART5_BASE_ADDR 0x02018000 +#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR +#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -83,6 +91,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX53) #elif defined(CONFIG_DEBUG_IMX6Q_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) +#elif defined(CONFIG_DEBUG_IMX6SL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index f10316b4ecdc..c5a59546a256 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -13,6 +13,7 @@ #include <linux/cpu.h> #include <linux/cpumask.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/percpu.h> #include <linux/node.h> @@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); const struct cpumask *cpu_coregroup_mask(int cpu) { diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 6c24985515a2..6cd554a4e73c 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,15 +14,11 @@ config ARCH_AT91RM9200 select SOC_AT91RM9200 config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" + bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" + bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 config ARCH_AT91SAM9263 @@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 @@ -50,6 +42,14 @@ config ARCH_AT91X40 endchoice +config ARCH_AT91SAM9G20 + bool + select ARCH_AT91SAM9260 + +config ARCH_AT91SAM9G10 + bool + select ARCH_AT91SAM9261 + # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -183,12 +183,6 @@ config MACH_AFEB9260 <svn://194.85.238.22/home/users/george/svn/arm9eb> <http://groups.google.com/group/arm9fpga-evolution-board> -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" help @@ -207,76 +201,6 @@ config MACH_FLEXIBITY Select this if you are using Flexibity Connect board <http://www.flexibity.com> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G20 - comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK @@ -334,24 +258,64 @@ config MACH_GSIA18S produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> endif -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 788562dccb43..d07bcfad4441 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o @@ -55,7 +53,6 @@ obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o @@ -67,7 +64,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o @@ -80,7 +76,6 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o -obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 8b7fce067652..95a418a7aabe 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -266,6 +266,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e631fec040ce..2abee6626aac 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -249,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), }; /* diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b446645c7727..d3437624ca4e 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {} */ static struct at73c213_board_info at73c213_data = { .ssc_id = 1, -#if defined(CONFIG_MACH_AT91SAM9261EK) - .shortname = "AT91SAM9261-EK external DAC", -#else - .shortname = "AT91SAM9G10-EK external DAC", -#endif + .shortname = "AT91SAM9261/9G10-EK external DAC", }; #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) @@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_stn_monspecs, .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #else @@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_tft_monspecs, .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #endif @@ -574,6 +564,10 @@ static void __init ek_board_init(void) /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); at91_add_device_serial(); + + if (cpu_is_at91sam9g10()) + ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; + /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ @@ -606,11 +600,17 @@ static void __init ek_board_init(void) at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } -#if defined(CONFIG_MACH_AT91SAM9261EK) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -#else + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") -#endif /* Maintainer: Atmel */ .init_time = at91sam926x_pit_init, .map_io = at91_map_io, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c deleted file mode 100644 index 2487d944a1bc..000000000000 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-usb-a926x.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2007 Calao-systems - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "at91_shdwc.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.00 MHz crystal */ - at91_initialize(12000000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PB11, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -static void __init ek_add_device_udc(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_udc_data.vbus_pin = AT91_PIN_PC5; - - at91_add_device_udc(&ek_udc_data); -} - -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4 -static int at91_mmc_spi_init(struct device *dev, - irqreturn_t (*detect_int)(int, void *), void *data) -{ - /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0); - return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-spi-detect", data); -} - -static void at91_mmc_spi_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data); -} - -static struct mmc_spi_platform_data at91_mmc_spi_pdata = { - .init = at91_mmc_spi_init, - .exit = at91_mmc_spi_exit, - .detect_delay = 100, /* msecs */ -}; -#endif - -/* - * SPI devices. - */ -static struct spi_board_info usb_a9263_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - } -}; - -static struct spi_board_info usb_a9g20_spi_devices[] = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) - { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 0, - .platform_data = &at91_mmc_spi_pdata, - .mode = SPI_MODE_3, - }, -#endif -}; - -static void __init ek_add_device_spi(void) -{ - if (machine_is_usb_a9263()) - at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices)); - else if (machine_is_usb_a9g20()) - at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices)); -} - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - -static void __init ek_add_device_eth(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_macb_data.phy_irq_pin = AT91_PIN_PA31; - - at91_add_device_eth(&ek_macb_data); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "barebox", - .offset = 0, - .size = 3 * SZ_128K, - }, { - .name = "bareboxenv", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "bareboxenv2", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "oftree", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 4 * SZ_1M, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, { - .name = "data", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA22, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) { - ek_nand_data.rdy_pin = AT91_PIN_PC13; - ek_nand_data.enable_pin = AT91_PIN_PC14; - } - - /* configure chip-select 3 (NAND) */ - if (machine_is_usb_a9g20()) - sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config); - else - sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* USER PUSH BUTTON */ - .code = KEY_ENTER, - .gpio = AT91_PIN_PB10, - .active_low = 1, - .desc = "user_pb", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */ - at91_set_deglitch(AT91_PIN_PB10, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* user_led (green) */ - .name = "user_led", - .gpio = AT91_PIN_PB21, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("rv3029c2", 0x56), - }, -}; - -static void __init ek_add_device_leds(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_leds[0].active_low = 0; - - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - ek_add_device_udc(); - /* SPI */ - ek_add_device_spi(); - /* Ethernet */ - ek_add_device_eth(); - /* NAND */ - ek_add_device_nand(); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - ek_add_device_leds(); - - if (machine_is_usb_a9g20()) { - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - } else { - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* shutdown controller, wakeup button (5 msec low) */ - at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) - | AT91_SHDW_WKMODE0_LOW - | AT91_SHDW_RTTWKEN); - } -} - -MACHINE_START(USB_A9263, "CALAO USB_A9263") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9260, "CALAO USB_A9260") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9G20, "CALAO USB_A92G0") - /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ba44328464f3..f25cf888f3d4 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -56,9 +56,6 @@ config MXC_USE_EPIT uses the same clocks as the GPT. Anyway, on some systems the GPT may be in use for other purposes. -config MXC_ULPI - bool - config ARCH_HAS_RNGA bool @@ -233,7 +230,7 @@ config MACH_EUKREA_CPUIMX25SD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX25 choice @@ -284,7 +281,7 @@ config MACH_PCM038 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This @@ -314,7 +311,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for Eukrea CPUIMX27 platform. This includes @@ -369,7 +366,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for MX27PDK platform. This includes specific @@ -414,7 +411,7 @@ config MACH_PCA100 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCARD-s (aka pca100) platform. This @@ -481,7 +478,7 @@ config MACH_MX31LILLY select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31 based LILLY1131 modules. This includes @@ -497,7 +494,7 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31 LITEKIT platform. This includes specific @@ -514,7 +511,7 @@ config MACH_PCM037 select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Phytec pcm037 platform. This includes @@ -544,7 +541,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31PDK (3DS) platform. This includes specific @@ -571,7 +568,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31moboard platform. This includes specific @@ -595,7 +592,7 @@ config MACH_ARMADILLO5X0 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Atmark Armadillo-500 platform. This includes @@ -639,7 +636,7 @@ config MACH_PCM043 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Phytec pcm043 platform. This includes @@ -673,7 +670,7 @@ config MACH_EUKREA_CPUIMX35SD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI + select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Eukrea CPUIMX35 platform. This includes @@ -816,6 +813,40 @@ config SOC_IMX6Q help This enables support for Freescale i.MX6 Quad processor. +config SOC_IMX6SL + bool "i.MX6 SoloLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_GIC + select CPU_V7 + select HAVE_IMX_ANATOP + select HAVE_IMX_GPC + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select PINCTRL + select PINCTRL_IMX6SL + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + + help + This enables support for Freescale i.MX6 SoloLite processor. + +config SOC_VF610 + bool "Vybrid Family VF610 support" + select CPU_V7 + select ARM_GIC + select CLKSRC_OF + select PINCTRL + select PINCTRL_VF610 + select VF_PIT_TIMER + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + + help + This enable support for Freescale Vybrid VF610 processor. + endif source "arch/arm/mach-imx/devices/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 70ae7c490ac0..e20f22d58fd8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o @@ -98,6 +97,7 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o @@ -111,4 +111,6 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o +obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o + obj-y += devices/ diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 6fc486b6a3c6..9afac26fa1cc 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -73,6 +73,12 @@ static const char *mx53_cko2_sel[] = { "tve_sel", "lp_apm", "uart_root", "dummy"/* spdif0_clk_root */, "dummy", "dummy", }; +static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", }; +static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", }; +static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; +static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; +static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; + enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, @@ -110,7 +116,9 @@ enum imx5_clks { owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate, cko1_sel, cko1_podf, cko1, cko2_sel, cko2_podf, cko2, - srtc_gate, pata_gate, + srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel, + spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf, + spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate, clk_max }; @@ -123,11 +131,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, { int i; + of_clk_init(NULL); + clk[dummy] = imx_clk_fixed("dummy", 0); - clk[ckil] = imx_clk_fixed("ckil", rate_ckil); - clk[osc] = imx_clk_fixed("osc", rate_osc); - clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1); - clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2); + clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil); + clk[osc] = imx_obtain_fixed_clock("osc", rate_osc); + clk[ckih1] = imx_obtain_fixed_clock("ckih1", rate_ckih1); + clk[ckih2] = imx_obtain_fixed_clock("ckih2", rate_ckih2); clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1, lp_apm_sel, ARRAY_SIZE(lp_apm_sel)); @@ -267,6 +277,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28); clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0); + clk[spdif0_sel] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); + clk[spdif0_pred] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3); + clk[spdif0_podf] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6); + clk[spdif0_com_s] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1, + spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT); + clk[spdif0_gate] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26); + clk[spdif_ipg_gate] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -310,8 +327,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); - clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); - clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); @@ -378,6 +393,15 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8); clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10); clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12); + clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, + mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); + clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, + spdif_sel, ARRAY_SIZE(spdif_sel)); + clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); + clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); + clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, + mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); + clk[spdif1_gate] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -485,6 +509,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); + clk[sata_gate] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2); clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); @@ -495,6 +520,8 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); + clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, + mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel)); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -542,42 +569,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, return 0; } -#ifdef CONFIG_OF -static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc, - unsigned long *ckih1, unsigned long *ckih2) -{ - struct device_node *np; - - /* retrieve the freqency of fixed clocks from device tree */ - for_each_compatible_node(np, NULL, "fixed-clock") { - u32 rate; - if (of_property_read_u32(np, "clock-frequency", &rate)) - continue; - - if (of_device_is_compatible(np, "fsl,imx-ckil")) - *ckil = rate; - else if (of_device_is_compatible(np, "fsl,imx-osc")) - *osc = rate; - else if (of_device_is_compatible(np, "fsl,imx-ckih1")) - *ckih1 = rate; - else if (of_device_is_compatible(np, "fsl,imx-ckih2")) - *ckih2 = rate; - } -} - int __init mx51_clocks_init_dt(void) { - unsigned long ckil, osc, ckih1, ckih2; - - clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); - return mx51_clocks_init(ckil, osc, ckih1, ckih2); + return mx51_clocks_init(0, 0, 0, 0); } int __init mx53_clocks_init_dt(void) { - unsigned long ckil, osc, ckih1, ckih2; - - clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); - return mx53_clocks_init(ckil, osc, ckih1, ckih2); + return mx53_clocks_init(0, 0, 0, 0); } -#endif diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4e3148ce852d..4282e99f5ca1 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -238,7 +238,7 @@ enum mx6q_clks { pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, - usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max + usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max }; static struct clk *clk[clk_max]; @@ -270,27 +270,16 @@ static struct clk_div_table video_div_table[] = { { } }; -int __init mx6q_clocks_init(void) +static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); - - /* retrieve the freqency of fixed clocks from device tree */ - for_each_compatible_node(np, NULL, "fixed-clock") { - u32 rate; - if (of_property_read_u32(np, "clock-frequency", &rate)) - continue; - - if (of_device_is_compatible(np, "fsl,imx-ckil")) - clk[ckil] = imx_clk_fixed("ckil", rate); - else if (of_device_is_compatible(np, "fsl,imx-ckih1")) - clk[ckih] = imx_clk_fixed("ckih", rate); - else if (of_device_is_compatible(np, "fsl,imx-osc")) - clk[osc] = imx_clk_fixed("osc", rate); - } + clk[ckil] = imx_obtain_fixed_clock("ckil", 0); + clk[ckih] = imx_obtain_fixed_clock("ckih1", 0); + clk[osc] = imx_obtain_fixed_clock("osc", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); base = of_iomap(np, 0); @@ -312,7 +301,6 @@ int __init mx6q_clocks_init(void) clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); - clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -360,7 +348,7 @@ int __init mx6q_clocks_init(void) clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm"); + np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); ccm_base = base; @@ -481,7 +469,14 @@ int __init mx6q_clocks_init(void) clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); - clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); + if (cpu_is_imx6dl()) + /* + * The multiplexer and divider of imx6q clock gpu3d_shader get + * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl. + */ + clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24); + else + clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); @@ -499,7 +494,14 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); + if (cpu_is_imx6dl()) + /* + * The multiplexer and divider of the imx6q clock gpu2d get + * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl. + */ + clk[mlb] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18); + else + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); @@ -528,6 +530,7 @@ int __init mx6q_clocks_init(void) clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + clk[eim_slow] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10); clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); @@ -547,6 +550,8 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); clk_register_clkdev(clk[arm], NULL, "cpu0"); + clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); + clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); if (imx6q_revision() != IMX_CHIP_REVISION_1_0) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); @@ -576,6 +581,5 @@ int __init mx6q_clocks_init(void) WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); mxc_timer_init(base, irq); - - return 0; } +CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c new file mode 100644 index 000000000000..a307ac22dffe --- /dev/null +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -0,0 +1,267 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <dt-bindings/clock/imx6sl-clock.h> + +#include "clk.h" +#include "common.h" + +static const char const *step_sels[] = { "osc", "pll2_pfd2", }; +static const char const *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char const *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; +static const char const *ocram_sels[] = { "periph", "ocram_alt_sels", }; +static const char const *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; +static const char const *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char const *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; +static const char const *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; +static const char const *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; +static const char const *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char const *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; +static const char const *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_post_div", "dummy", }; +static const char const *perclk_sels[] = { "ipg", "osc", }; +static const char const *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char const *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; +static const char const *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; +static const char const *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; +static const char const *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; +static const char const *audio_sels[] = { "pll4_post_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; +static const char const *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char const *uart_sels[] = { "pll3_80m", "osc", }; + +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk *clks[IMX6SL_CLK_CLK_END]; +static struct clk_onecell_data clk_data; + +static void __init imx6sl_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int irq; + int i; + + clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); + clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* type name parent base div_mask */ + clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + + /* + * usbphy1 and usbphy2 are implemented as dummy gates using reserve + * bit 20. They are used by phy driver to keep the refcount of + * parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be + * turned on during boot, and software will not need to control it + * anymore after that. + */ + clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* dev name parent_name flags reg shift width div: flags, div_table lock */ + clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); + + /* name parent_name reg idx */ + clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0); + clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1); + clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2); + clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3); + + /* name parent_name mult div */ + clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2); + clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); + clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels)); + clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels)); + clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); + clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); + clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); + clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels)); + clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels)); + clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels)); + clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + + /* name reg shift width busy: reg, shift parent_names num_parents */ + clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + /* name parent_name reg shift width */ + clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3); + clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); + clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3); + clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); + clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3); + clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3); + clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3); + clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3); + clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3); + clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3); + clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3); + clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3); + clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3); + clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3); + clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3); + clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3); + clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3); + clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3); + clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6); + + /* name parent_name reg shift width busy: reg, shift */ + clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + + /* name parent_name reg shift */ + clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); + clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); + clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); + clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); + clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); + clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20); + clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); + clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26); + clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0); + clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2); + clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4); + clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6); + clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8); + clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10); + clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6); + clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14); + clks[IMX6SL_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); + clks[IMX6SL_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); + clks[IMX6SL_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24); + clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26); + clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6SL clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); + clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); + } + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + mxc_timer_init(base, irq); +} +CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index d09bc3df9a7a..a9fad5f8d340 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -296,13 +296,6 @@ static const struct clk_ops clk_pllv3_enet_ops = { .recalc_rate = clk_pllv3_enet_recalc_rate, }; -static const struct clk_ops clk_pllv3_mlb_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, -}; - struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, u32 div_mask) @@ -330,9 +323,6 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, case IMX_PLLV3_ENET: ops = &clk_pllv3_enet_ops; break; - case IMX_PLLV3_MLB: - ops = &clk_pllv3_mlb_ops; - break; default: ops = &clk_pllv3_ops; } diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c new file mode 100644 index 000000000000..d617c0b7c809 --- /dev/null +++ b/arch/arm/mach-imx/clk-vf610.c @@ -0,0 +1,319 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/of_address.h> +#include <linux/clk.h> +#include <dt-bindings/clock/vf610-clock.h> + +#include "clk.h" + +#define CCM_CCR (ccm_base + 0x00) +#define CCM_CSR (ccm_base + 0x04) +#define CCM_CCSR (ccm_base + 0x08) +#define CCM_CACRR (ccm_base + 0x0c) +#define CCM_CSCMR1 (ccm_base + 0x10) +#define CCM_CSCDR1 (ccm_base + 0x14) +#define CCM_CSCDR2 (ccm_base + 0x18) +#define CCM_CSCDR3 (ccm_base + 0x1c) +#define CCM_CSCMR2 (ccm_base + 0x20) +#define CCM_CSCDR4 (ccm_base + 0x24) +#define CCM_CLPCR (ccm_base + 0x2c) +#define CCM_CISR (ccm_base + 0x30) +#define CCM_CIMR (ccm_base + 0x34) +#define CCM_CGPR (ccm_base + 0x3c) +#define CCM_CCGR0 (ccm_base + 0x40) +#define CCM_CCGR1 (ccm_base + 0x44) +#define CCM_CCGR2 (ccm_base + 0x48) +#define CCM_CCGR3 (ccm_base + 0x4c) +#define CCM_CCGR4 (ccm_base + 0x50) +#define CCM_CCGR5 (ccm_base + 0x54) +#define CCM_CCGR6 (ccm_base + 0x58) +#define CCM_CCGR7 (ccm_base + 0x5c) +#define CCM_CCGR8 (ccm_base + 0x60) +#define CCM_CCGR9 (ccm_base + 0x64) +#define CCM_CCGR10 (ccm_base + 0x68) +#define CCM_CCGR11 (ccm_base + 0x6c) +#define CCM_CMEOR0 (ccm_base + 0x70) +#define CCM_CMEOR1 (ccm_base + 0x74) +#define CCM_CMEOR2 (ccm_base + 0x78) +#define CCM_CMEOR3 (ccm_base + 0x7c) +#define CCM_CMEOR4 (ccm_base + 0x80) +#define CCM_CMEOR5 (ccm_base + 0x84) +#define CCM_CPPDSR (ccm_base + 0x88) +#define CCM_CCOWR (ccm_base + 0x8c) +#define CCM_CCPGR0 (ccm_base + 0x90) +#define CCM_CCPGR1 (ccm_base + 0x94) +#define CCM_CCPGR2 (ccm_base + 0x98) +#define CCM_CCPGR3 (ccm_base + 0x9c) + +#define CCM_CCGRx_CGn(n) ((n) * 2) + +#define PFD_PLL1_BASE (anatop_base + 0x2b0) +#define PFD_PLL2_BASE (anatop_base + 0x100) +#define PFD_PLL3_BASE (anatop_base + 0xf0) + +static void __iomem *anatop_base; +static void __iomem *ccm_base; + +/* sources for multiplexer clocks, this is used multiple times */ +static const char const *fast_sels[] = { "firc", "fxosc", }; +static const char const *slow_sels[] = { "sirc_32k", "sxosc", }; +static const char const *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char const *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char const *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char const *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; +static const char const *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; +static const char const *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; +static const char const *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char const *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char const *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; +static const char const *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char const *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char const *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char const *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; +static const char const *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +/* FTM counter clock source, not module clock */ +static const char const *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; +static const char const *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; + +static struct clk_div_table pll4_main_div_table[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 6 }, + { .val = 3, .div = 8 }, + { .val = 4, .div = 10 }, + { .val = 5, .div = 12 }, + { .val = 6, .div = 14 }, + { .val = 7, .div = 16 }, + { } +}; + +static struct clk *clk[VF610_CLK_END]; +static struct clk_onecell_data clk_data; + +static void __init vf610_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + + clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000); + clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000); + clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000); + + clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0); + clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0); + clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0); + clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0); + + clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); + + np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop"); + anatop_base = of_iomap(np, 0); + BUG_ON(!anatop_base); + + np = ccm_node; + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); + + clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); + clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); + + clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1); + clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0); + clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1); + clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2); + clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3); + + clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1); + clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0); + clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1); + clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2); + clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3); + + clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1); + clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0); + clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1); + clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2); + clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3); + + clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1); + /* Enet pll: fixed 50Mhz */ + clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); + /* pll6: default 960Mhz */ + clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); + clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); + clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); + clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels)); + clk[VF610_CLK_DDR_SEL] = imx_clk_mux("ddr_sel", CCM_CCSR, 6, 1, ddr_sels, ARRAY_SIZE(ddr_sels)); + clk[VF610_CLK_SYS_BUS] = imx_clk_divider("sys_bus", "sys_sel", CCM_CACRR, 0, 3); + clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); + clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); + + clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); + clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); + + clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4); + clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4); + clk[VF610_CLK_QSPI0_X4_DIV] = imx_clk_divider("qspi0_x4", "qspi0_en", CCM_CSCDR3, 0, 2); + clk[VF610_CLK_QSPI0_X2_DIV] = imx_clk_divider("qspi0_x2", "qspi0_x4", CCM_CSCDR3, 2, 1); + clk[VF610_CLK_QSPI0_X1_DIV] = imx_clk_divider("qspi0_x1", "qspi0_x2", CCM_CSCDR3, 3, 1); + clk[VF610_CLK_QSPI0] = imx_clk_gate2("qspi0", "qspi0_x1", CCM_CCGR2, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", CCM_CSCMR1, 24, 2, qspi_sels, 4); + clk[VF610_CLK_QSPI1_EN] = imx_clk_gate("qspi1_en", "qspi1_sel", CCM_CSCDR3, 12); + clk[VF610_CLK_QSPI1_X4_DIV] = imx_clk_divider("qspi1_x4", "qspi1_en", CCM_CSCDR3, 8, 2); + clk[VF610_CLK_QSPI1_X2_DIV] = imx_clk_divider("qspi1_x2", "qspi1_x4", CCM_CSCDR3, 10, 1); + clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); + clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); + + clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10); + clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20); + clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); + clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); + clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); + clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); + + clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7)); + clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); + + clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); + clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13)); + clk[VF610_CLK_DSPI2] = imx_clk_gate2("dspi2", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DSPI3] = imx_clk_gate2("dspi3", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(13)); + + clk[VF610_CLK_WDT] = imx_clk_gate2("wdt", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(14)); + + clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2, esdhc_sels, 4); + clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel", CCM_CSCDR2, 28); + clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en", CCM_CSCDR2, 16, 4); + clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_ESDHC1_SEL] = imx_clk_mux("esdhc1_sel", CCM_CSCMR1, 18, 2, esdhc_sels, 4); + clk[VF610_CLK_ESDHC1_EN] = imx_clk_gate("esdhc1_en", "esdhc1_sel", CCM_CSCDR2, 29); + clk[VF610_CLK_ESDHC1_DIV] = imx_clk_divider("esdhc1_div", "esdhc1_en", CCM_CSCDR2, 20, 4); + clk[VF610_CLK_ESDHC1] = imx_clk_gate2("eshc1", "esdhc1_div", CCM_CCGR7, CCM_CCGRx_CGn(2)); + + /* + * ftm_ext_clk and ftm_fix_clk are FTM timer counter's + * selectable clock sources, both use a common enable bit + * in CCM_CSCDR1, selecting "dummy" clock as parent of + * "ftm0_ext_fix" make it serve only for enable/disable. + */ + clk[VF610_CLK_FTM0_EXT_SEL] = imx_clk_mux("ftm0_ext_sel", CCM_CSCMR2, 6, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM0_FIX_SEL] = imx_clk_mux("ftm0_fix_sel", CCM_CSCMR2, 14, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM0_EXT_FIX_EN] = imx_clk_gate("ftm0_ext_fix_en", "dummy", CCM_CSCDR1, 25); + clk[VF610_CLK_FTM1_EXT_SEL] = imx_clk_mux("ftm1_ext_sel", CCM_CSCMR2, 8, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM1_FIX_SEL] = imx_clk_mux("ftm1_fix_sel", CCM_CSCMR2, 15, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM1_EXT_FIX_EN] = imx_clk_gate("ftm1_ext_fix_en", "dummy", CCM_CSCDR1, 26); + clk[VF610_CLK_FTM2_EXT_SEL] = imx_clk_mux("ftm2_ext_sel", CCM_CSCMR2, 10, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM2_FIX_SEL] = imx_clk_mux("ftm2_fix_sel", CCM_CSCMR2, 16, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM2_EXT_FIX_EN] = imx_clk_gate("ftm2_ext_fix_en", "dummy", CCM_CSCDR1, 27); + clk[VF610_CLK_FTM3_EXT_SEL] = imx_clk_mux("ftm3_ext_sel", CCM_CSCMR2, 12, 2, ftm_ext_sels, 4); + clk[VF610_CLK_FTM3_FIX_SEL] = imx_clk_mux("ftm3_fix_sel", CCM_CSCMR2, 17, 1, ftm_fix_sels, 2); + clk[VF610_CLK_FTM3_EXT_FIX_EN] = imx_clk_gate("ftm3_ext_fix_en", "dummy", CCM_CSCDR1, 28); + + /* ftm(n)_clk are FTM module operation clock */ + clk[VF610_CLK_FTM0] = imx_clk_gate2("ftm0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_FTM1] = imx_clk_gate2("ftm1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_FTM2] = imx_clk_gate2("ftm2", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_FTM3] = imx_clk_gate2("ftm3", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(9)); + + clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2); + clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19); + clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3); + clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8)); + clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2); + clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23); + clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3); + clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8)); + + clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4); + clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30); + clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4); + clk[VF610_CLK_ESAI] = imx_clk_gate2("esai", "esai_div", CCM_CCGR4, CCM_CCGRx_CGn(2)); + + clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4); + clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16); + clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4); + clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15)); + + clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4); + clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17); + clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4); + clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0)); + + clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4); + clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18); + clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4); + clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4); + clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19); + clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4); + clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2)); + + clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4); + clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9); + clk[VF610_CLK_NFC_PRE_DIV] = imx_clk_divider("nfc_pre_div", "nfc_en", CCM_CSCDR3, 13, 3); + clk[VF610_CLK_NFC_FRAC_DIV] = imx_clk_divider("nfc_frac_div", "nfc_pre_div", CCM_CSCDR2, 4, 4); + clk[VF610_CLK_NFC] = imx_clk_gate2("nfc", "nfc_frac_div", CCM_CCGR10, CCM_CCGRx_CGn(0)); + + clk[VF610_CLK_GPU_SEL] = imx_clk_mux("gpu_sel", CCM_CSCMR1, 14, 1, gpu_sels, 2); + clk[VF610_CLK_GPU_EN] = imx_clk_gate("gpu_en", "gpu_sel", CCM_CSCDR2, 10); + clk[VF610_CLK_GPU2D] = imx_clk_gate2("gpu", "gpu_en", CCM_CCGR8, CCM_CCGRx_CGn(15)); + + clk[VF610_CLK_VADC_SEL] = imx_clk_mux("vadc_sel", CCM_CSCMR1, 8, 2, vadc_sels, 3); + clk[VF610_CLK_VADC_EN] = imx_clk_gate("vadc_en", "vadc_sel", CCM_CSCDR1, 22); + clk[VF610_CLK_VADC_DIV] = imx_clk_divider("vadc_div", "vadc_en", CCM_CSCDR1, 20, 2); + clk[VF610_CLK_VADC_DIV_HALF] = imx_clk_fixed_factor("vadc_div_half", "vadc_div", 1, 2); + clk[VF610_CLK_VADC] = imx_clk_gate2("vadc", "vadc_div", CCM_CCGR8, CCM_CCGRx_CGn(7)); + + clk[VF610_CLK_ADC0] = imx_clk_gate2("adc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(11)); + clk[VF610_CLK_ADC1] = imx_clk_gate2("adc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(11)); + clk[VF610_CLK_DAC0] = imx_clk_gate2("dac0", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(12)); + clk[VF610_CLK_DAC1] = imx_clk_gate2("dac1", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(13)); + + clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1)); + + clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4)); + + clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]); + clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI0_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X2_DIV]) / 2); + + clk_set_parent(clk[VF610_CLK_QSPI1_SEL], clk[VF610_CLK_PLL1_PFD4]); + clk_set_rate(clk[VF610_CLK_QSPI1_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_SEL]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2); + clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2); + + clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]); + clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]); + + /* Add the clocks to provider list */ + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} +CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init); diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index 37e884ed1cd4..55bc80a00666 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -1,4 +1,39 @@ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include "clk.h" DEFINE_SPINLOCK(imx_ccm_lock); + +static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name) +{ + struct of_phandle_args phandle; + struct clk *clk = ERR_PTR(-ENODEV); + char *path; + + path = kasprintf(GFP_KERNEL, "/clocks/%s", name); + if (!path) + return ERR_PTR(-ENOMEM); + + phandle.np = of_find_node_by_path(path); + kfree(path); + + if (phandle.np) { + clk = of_clk_get_from_provider(&phandle); + of_node_put(phandle.np); + } + return clk; +} + +struct clk * __init imx_obtain_fixed_clock( + const char *name, unsigned long rate) +{ + struct clk *clk; + + clk = imx_obtain_fixed_clock_from_dt(name); + if (IS_ERR(clk)) + clk = imx_clk_fixed(name, rate); + return clk; +} diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index d9d9d9c66dff..0e4e8bb261b9 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -18,7 +18,6 @@ enum imx_pllv3_type { IMX_PLLV3_USB, IMX_PLLV3_AV, IMX_PLLV3_ENET, - IMX_PLLV3_MLB, }; struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, @@ -29,6 +28,9 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock); +struct clk * imx_obtain_fixed_clock( + const char *name, unsigned long rate); + static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c08ae3f99cee..ee78847abf47 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -68,12 +68,12 @@ extern int mx27_clocks_init_dt(void); extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); -extern int mx6q_clocks_init(void); extern struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); +extern void mxc_arch_reset_init_dt(void); extern int mx53_revision(void); extern int imx6q_revision(void); extern int mx53_display_revision(void); diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 356131f7b591..a3b0b04b45c9 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -20,6 +20,7 @@ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ +#include <asm/io.h> #include <asm/sizes.h> #define addr_in_module(addr, mod) \ diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 82348391582a..3e1ec5ffe630 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -19,6 +19,8 @@ static void __init imx25_dt_init(void) { + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 4aaead0a77ff..4e235ecb4021 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -22,6 +22,8 @@ static void __init imx27_dt_init(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_full(&devinfo); diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 67de611e29ab..818a1cc2fe45 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -20,6 +20,8 @@ static void __init imx31_dt_init(void) { + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index ab24cc322111..53e43e579dd7 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -23,6 +23,8 @@ static void __init imx51_dt_init(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_full(&devinfo); } diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index 4b34f52dc46b..0a920d184867 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/irq.h> +#include <linux/platform_data/asoc-imx-ssi.h> #include "irq-common.h" diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index f579c616feed..98c58944015a 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -21,25 +21,12 @@ #include <asm/mach/time.h> #include "common.h" +#include "hardware.h" #include "mx53.h" -static void __init imx53_qsb_init(void) -{ - struct clk *clk; - - clk = clk_get_sys(NULL, "ssi_ext1"); - if (IS_ERR(clk)) { - pr_err("failed to get clk ssi_ext1\n"); - return; - } - - clk_register_clkdev(clk, NULL, "0-000a"); -} - static void __init imx53_dt_init(void) { - if (of_machine_is_compatible("fsl,imx53-qsb")) - imx53_qsb_init(); + mxc_arch_reset_init_dt(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5536fd81379a..f5965220a4d8 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,6 +11,7 @@ */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/clocksource.h> #include <linux/cpu.h> @@ -145,6 +146,45 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_sabresd_cko1_setup(void) +{ + struct clk *cko1_sel, *pll4, *pll4_post, *cko1; + unsigned long rate; + + cko1_sel = clk_get_sys(NULL, "cko1_sel"); + pll4 = clk_get_sys(NULL, "pll4_audio"); + pll4_post = clk_get_sys(NULL, "pll4_post_div"); + cko1 = clk_get_sys(NULL, "cko1"); + if (IS_ERR(cko1_sel) || IS_ERR(pll4) + || IS_ERR(pll4_post) || IS_ERR(cko1)) { + pr_err("cko1 setup failed!\n"); + goto put_clk; + } + /* + * Setting pll4 at 768MHz (24MHz * 32) + * So its child clock can get 24MHz easily + */ + clk_set_rate(pll4, 768000000); + + clk_set_parent(cko1_sel, pll4_post); + rate = clk_round_rate(cko1, 24000000); + clk_set_rate(cko1, rate); +put_clk: + if (!IS_ERR(cko1_sel)) + clk_put(cko1_sel); + if (!IS_ERR(pll4_post)) + clk_put(pll4_post); + if (!IS_ERR(pll4)) + clk_put(pll4); + if (!IS_ERR(cko1)) + clk_put(cko1); +} + +static void __init imx6q_sabresd_init(void) +{ + imx6q_sabresd_cko1_setup(); +} + static void __init imx6q_1588_init(void) { struct regmap *gpr; @@ -165,6 +205,9 @@ static void __init imx6q_init_machine(void) { if (of_machine_is_compatible("fsl,imx6q-sabrelite")) imx6q_sabrelite_init(); + else if (of_machine_is_compatible("fsl,imx6q-sabresd") || + of_machine_is_compatible("fsl,imx6dl-sabresd")) + imx6q_sabresd_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -253,10 +296,44 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } +#ifdef CONFIG_CACHE_L2X0 +static void __init imx6q_init_l2cache(void) +{ + void __iomem *l2x0_base; + struct device_node *np; + unsigned int val; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + if (!np) + goto out; + + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) { + of_node_put(np); + goto out; + } + + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val |= 0x70800000; + writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); + val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; + writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + + iounmap(l2x0_base); + of_node_put(np); + +out: + l2x0_of_init(0, ~0UL); +} +#else +static inline void imx6q_init_l2cache(void) {} +#endif + static void __init imx6q_init_irq(void) { imx6q_init_revision(); - l2x0_of_init(0, ~0UL); + imx6q_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); @@ -264,7 +341,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { - mx6q_clocks_init(); + of_clk_init(NULL); clocksource_of_init(); imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", imx6q_revision()); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c new file mode 100644 index 000000000000..132db2609507 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -0,0 +1,52 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk-provider.h> +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6sl_init_machine(void) +{ + mxc_arch_reset_init_dt(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init imx6sl_init_irq(void) +{ + l2x0_of_init(0, ~0UL); + imx_src_init(); + imx_gpc_init(); + irqchip_init(); +} + +static void __init imx6sl_timer_init(void) +{ + of_clk_init(NULL); +} + +static const char *imx6sl_dt_compat[] __initdata = { + "fsl,imx6sl", + NULL, +}; + +DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = imx6sl_init_irq, + .init_time = imx6sl_timer_init, + .init_machine = imx6sl_init_machine, + .dt_compat = imx6sl_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index b8b15bb1ffdf..19bb6441a7d4 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -398,8 +398,8 @@ static void __init pca100_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create( + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c new file mode 100644 index 000000000000..816991deb9b8 --- /dev/null +++ b/arch/arm/mach-imx/mach-vf610.c @@ -0,0 +1,48 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" + +static void __init vf610_init_machine(void) +{ + mxc_arch_reset_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init vf610_init_irq(void) +{ + l2x0_of_init(0, ~0UL); + irqchip_init(); +} + +static void __init vf610_init_time(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static const char *vf610_dt_compat[] __initdata = { + "fsl,vf610", + NULL, +}; + +DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") + .init_irq = vf610_init_irq, + .init_time = vf610_init_time, + .init_machine = vf610_init_machine, + .dt_compat = vf610_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 3c609c52d3eb..e065fedb3ad4 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -39,7 +39,6 @@ void __init mx1_map_io(void) void __init imx1_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX1); - mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), MX1_NUM_GPIO_PORT); } @@ -51,6 +50,7 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { + mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index d8ccd3a8ec53..2e91ab2ca378 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -66,7 +66,6 @@ void __init mx21_map_io(void) void __init imx21_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX21); - mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR), MX21_NUM_GPIO_PORT); } @@ -82,6 +81,7 @@ static const struct resource imx21_audmux_res[] __initconst = { void __init imx21_soc_init(void) { + mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 9357707bb7af..e065c117f5a6 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -54,7 +54,6 @@ void __init imx25_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX25); mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } void __init mx25_init_irq(void) @@ -89,6 +88,7 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { + mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); mxc_device_init(); /* i.mx25 has the i.mx35 type gpio */ diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 4f1be65a7b5f..7d82a5a5b16b 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -66,7 +66,6 @@ void __init mx27_map_io(void) void __init imx27_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX27); - mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR), MX27_NUM_GPIO_PORT); } @@ -82,6 +81,7 @@ static const struct resource imx27_audmux_res[] __initconst = { void __init imx27_soc_init(void) { + mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); mxc_device_init(); /* i.mx27 has the i.mx21 type gpio */ diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index e0e69a682174..8f0f60697f55 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -138,7 +138,6 @@ void __init mx31_map_io(void) void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); arch_ioremap_caller = imx3_ioremap_caller; arm_pm_idle = imx3_idle; mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); @@ -174,6 +173,7 @@ void __init imx31_soc_init(void) imx3_init_l2x0(); + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); @@ -216,7 +216,6 @@ void __init imx35_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); arm_pm_idle = imx3_idle; arch_ioremap_caller = imx3_ioremap_caller; mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); @@ -272,6 +271,7 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index b7c4e70e5081..cf193d87274a 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -83,7 +83,6 @@ void __init imx51_init_early(void) imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); imx_src_init(); } @@ -91,7 +90,6 @@ void __init imx53_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); imx_src_init(); } @@ -129,6 +127,7 @@ static const struct resource imx51_audmux_res[] __initconst = { void __init imx51_soc_init(void) { + mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); mxc_device_init(); /* i.mx51 has the i.mx35 type gpio */ diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 695e0d73bf85..7cdc79a9657c 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -21,6 +21,8 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/system_misc.h> #include <asm/proc-fns.h> @@ -30,6 +32,7 @@ #include "hardware.h" static void __iomem *wdog_base; +static struct clk *wdog_clk; /* * Reset the system. It is called by machine_restart(). @@ -38,16 +41,13 @@ void mxc_restart(char mode, const char *cmd) { unsigned int wcr_enable; - if (cpu_is_mx1()) { - wcr_enable = (1 << 0); - } else { - struct clk *clk; + if (wdog_clk) + clk_enable(wdog_clk); - clk = clk_get_sys("imx2-wdt.0", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); + if (cpu_is_mx1()) + wcr_enable = (1 << 0); + else wcr_enable = (1 << 2); - } /* Assert SRS signal */ __raw_writew(wcr_enable, wdog_base); @@ -55,7 +55,7 @@ void mxc_restart(char mode, const char *cmd) /* wait for reset to assert... */ mdelay(500); - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + pr_err("%s: Watchdog reset failed to assert reset\n", __func__); /* delay to allow the serial port to show the message */ mdelay(50); @@ -64,7 +64,34 @@ void mxc_restart(char mode, const char *cmd) soft_restart(0); } -void mxc_arch_reset_init(void __iomem *base) +void __init mxc_arch_reset_init(void __iomem *base) { wdog_base = base; + + wdog_clk = clk_get_sys("imx2-wdt.0", NULL); + if (IS_ERR(wdog_clk)) { + pr_warn("%s: failed to get wdog clock\n", __func__); + wdog_clk = NULL; + return; + } + + clk_prepare(wdog_clk); +} + +void __init mxc_arch_reset_init_dt(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt"); + wdog_base = of_iomap(np, 0); + WARN_ON(!wdog_base); + + wdog_clk = of_clk_get(np, 0); + if (IS_ERR(wdog_clk)) { + pr_warn("%s: failed to get wdog clock\n", __func__); + wdog_clk = NULL; + return; + } + + clk_prepare(wdog_clk); } diff --git a/arch/arm/mach-imx/ulpi.c b/arch/arm/mach-imx/ulpi.c deleted file mode 100644 index 0f051957d10c..000000000000 --- a/arch/arm/mach-imx/ulpi.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * Copyright 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include "ulpi.h" - -/* ULPIVIEW register bits */ -#define ULPIVW_WU (1 << 31) /* Wakeup */ -#define ULPIVW_RUN (1 << 30) /* read/write run */ -#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */ -#define ULPIVW_SS (1 << 27) /* SyncState */ -#define ULPIVW_PORT_MASK 0x07 /* Port field */ -#define ULPIVW_PORT_SHIFT 24 -#define ULPIVW_ADDR_MASK 0xff /* data address field */ -#define ULPIVW_ADDR_SHIFT 16 -#define ULPIVW_RDATA_MASK 0xff /* read data field */ -#define ULPIVW_RDATA_SHIFT 8 -#define ULPIVW_WDATA_MASK 0xff /* write data field */ -#define ULPIVW_WDATA_SHIFT 0 - -static int ulpi_poll(void __iomem *view, u32 bit) -{ - int timeout = 10000; - - while (timeout--) { - u32 data = __raw_readl(view); - - if (!(data & bit)) - return 0; - - cpu_relax(); - }; - - printk(KERN_WARNING "timeout polling for ULPI device\n"); - - return -ETIMEDOUT; -} - -static int ulpi_read(struct usb_phy *otg, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - /* read the register */ - __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view); - - /* wait for completion */ - ret = ulpi_poll(view, ULPIVW_RUN); - if (ret) - return ret; - - return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; -} - -static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - /* make sure the interface is running */ - if (!(__raw_readl(view) & ULPIVW_SS)) { - __raw_writel(ULPIVW_WU, view); - /* wait for wakeup */ - ret = ulpi_poll(view, ULPIVW_WU); - if (ret) - return ret; - } - - __raw_writel((ULPIVW_RUN | ULPIVW_WRITE | - (reg << ULPIVW_ADDR_SHIFT) | - ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view); - - /* wait for completion */ - return ulpi_poll(view, ULPIVW_RUN); -} - -struct usb_phy_io_ops mxc_ulpi_access_ops = { - .read = ulpi_read, - .write = ulpi_write, -}; -EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); - -struct usb_phy *imx_otg_ulpi_create(unsigned int flags) -{ - return otg_ulpi_create(&mxc_ulpi_access_ops, flags); -} diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h index 42bdaca6d7d9..23f5c0349e80 100644 --- a/arch/arm/mach-imx/ulpi.h +++ b/arch/arm/mach-imx/ulpi.h @@ -1,8 +1,13 @@ #ifndef __MACH_ULPI_H #define __MACH_ULPI_H -#ifdef CONFIG_USB_ULPI -struct usb_phy *imx_otg_ulpi_create(unsigned int flags); +#include <linux/usb/ulpi.h> + +#ifdef CONFIG_USB_ULPI_VIEWPORT +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&ulpi_viewport_access_ops, flags); +} #else static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) { @@ -10,7 +15,5 @@ static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) } #endif -extern struct usb_phy_io_ops mxc_ulpi_access_ops; - #endif /* __MACH_ULPI_H */ diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 827cde42414f..e96fd71abd76 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) || - (dev == MV88F6282_DEV_ID)) + if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) return MPP_F6281_MASK; + if (dev == MV88F6282_DEV_ID) + return MPP_F6282_MASK; if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) return MPP_F6192_MASK; if (dev == MV88F6180_DEV_ID) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4dc2fbba0ecd..59c30ef56790 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -25,6 +25,7 @@ config ARCH_MXS select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select PINCTRL + select SOC_BUS select SOC_IMX23 select SOC_IMX28 select STMP_DEVICE diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 5b62b6489d4b..ba227cb2c93b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -19,13 +19,13 @@ #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/irqchip.h> #include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -39,12 +39,28 @@ #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 +#define HW_DIGCTL_CHIPID 0x310 +#define HW_DIGCTL_CHIPID_MASK (0xffff << 16) +#define HW_DIGCTL_REV_MASK 0xff +#define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16) +#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16) + +#define MXS_CHIP_REVISION_1_0 0x10 +#define MXS_CHIP_REVISION_1_1 0x11 +#define MXS_CHIP_REVISION_1_2 0x12 +#define MXS_CHIP_REVISION_1_3 0x13 +#define MXS_CHIP_REVISION_1_4 0x14 +#define MXS_CHIP_REV_UNKNOWN 0xff + #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) #define MXS_SET_ADDR 0x4 #define MXS_CLR_ADDR 0x8 #define MXS_TOG_ADDR 0xc +static u32 chipid; +static u32 socid; + static inline void __mxs_setl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_SET_ADDR); @@ -352,29 +368,123 @@ static void __init tx28_post_init(void) pinctrl_put(pctl); } -static void __init cfa10049_init(void) +static void __init crystalfontz_init(void) { update_fec_mac_prop(OUI_CRYSTALFONTZ); } -static void __init cfa10037_init(void) +static const char __init *mxs_get_soc_id(void) { - update_fec_mac_prop(OUI_CRYSTALFONTZ); + struct device_node *np; + void __iomem *digctl_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); + digctl_base = of_iomap(np, 0); + WARN_ON(!digctl_base); + + chipid = readl(digctl_base + HW_DIGCTL_CHIPID); + socid = chipid & HW_DIGCTL_CHIPID_MASK; + + iounmap(digctl_base); + of_node_put(np); + + switch (socid) { + case HW_DIGCTL_CHIPID_MX23: + return "i.MX23"; + case HW_DIGCTL_CHIPID_MX28: + return "i.MX28"; + default: + return "Unknown"; + } +} + +static u32 __init mxs_get_cpu_rev(void) +{ + u32 rev = chipid & HW_DIGCTL_REV_MASK; + + switch (socid) { + case HW_DIGCTL_CHIPID_MX23: + switch (rev) { + case 0x0: + return MXS_CHIP_REVISION_1_0; + case 0x1: + return MXS_CHIP_REVISION_1_1; + case 0x2: + return MXS_CHIP_REVISION_1_2; + case 0x3: + return MXS_CHIP_REVISION_1_3; + case 0x4: + return MXS_CHIP_REVISION_1_4; + default: + return MXS_CHIP_REV_UNKNOWN; + } + case HW_DIGCTL_CHIPID_MX28: + switch (rev) { + case 0x0: + return MXS_CHIP_REVISION_1_1; + case 0x1: + return MXS_CHIP_REVISION_1_2; + default: + return MXS_CHIP_REV_UNKNOWN; + } + default: + return MXS_CHIP_REV_UNKNOWN; + } +} + +static const char __init *mxs_get_revision(void) +{ + u32 rev = mxs_get_cpu_rev(); + + if (rev != MXS_CHIP_REV_UNKNOWN) + return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf, + rev & 0xf); + else + return kasprintf(GFP_KERNEL, "%s", "Unknown"); } static void __init mxs_machine_init(void) { + struct device_node *root; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (ret) + return; + + soc_dev_attr->family = "Freescale MXS Family"; + soc_dev_attr->soc_id = mxs_get_soc_id(); + soc_dev_attr->revision = mxs_get_revision(); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); - else if (of_machine_is_compatible("crystalfontz,cfa10037")) - cfa10037_init(); - else if (of_machine_is_compatible("crystalfontz,cfa10049")) - cfa10049_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10037") || + of_machine_is_compatible("crystalfontz,cfa10049") || + of_machine_is_compatible("crystalfontz,cfa10055") || + of_machine_is_compatible("crystalfontz,cfa10057")) + crystalfontz_init(); of_platform_populate(NULL, of_default_bus_match_table, - mxs_auxdata_lookup, NULL); + mxs_auxdata_lookup, parent); if (of_machine_is_compatible("karo,tx28")) tx28_post_init(); @@ -435,7 +545,6 @@ static const char *mxs_dt_compat[] __initdata = { DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") .map_io = debug_ll_io_init, - .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, .init_time = mxs_timer_init, .init_machine = mxs_machine_init, diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 9b9d105f194c..5981c3db9b41 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,6 +6,7 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK + select CLKSRC_OF select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 59f6ff5c9bae..89e2c03db178 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -27,9 +27,7 @@ #include <linux/dma-mapping.h> #include <linux/irqchip.h> #include <linux/platform_data/clk-nomadik.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/clocksource.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_address.h> @@ -91,48 +89,6 @@ #define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ #define NOMADIK_UART1_VBASE 0xF01FB000 -static unsigned long out_low[] = { PIN_OUTPUT_LOW }; -static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; -static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; -static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; - -static struct pinctrl_map __initdata nhk8815_pinmap[] = { - PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), - PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), - /* Hog in MMC/SD card mux */ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), - /* MCCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), - /* MCCMD */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), - /* MCCMDDIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), - /* MCDAT3-0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), - /* MCDAT0DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), - /* MCDAT31DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), - /* MCMSFBCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), - /* CD input GPIO */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), - /* CD bias drive */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), - /* I2C0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), - /* I2C1 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), - /* I2C2 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), -}; - /* This is needed for LL-debug/earlyprintk/debug-macro.S */ static struct map_desc cpu8815_io_desc[] __initdata = { { @@ -172,7 +128,7 @@ static void __init cpu8815_timer_init_of(void) /* We need this to be up now */ nomadik_clk_init(); - mtu = of_find_node_by_path("/mtu0"); + mtu = of_find_node_by_path("/mtu@101e2000"); if (!mtu) return; base = of_iomap(mtu, 0); @@ -188,7 +144,7 @@ static void __init cpu8815_timer_init_of(void) src_cr |= SRC_CR_INIT_VAL; writel(src_cr, base); - nmdk_timer_init(base, irq); + clocksource_of_init(); } static struct fsmc_nand_timings cpu8815_nand_timings = { @@ -280,28 +236,10 @@ device_initcall(cpu8815_mmcsd_init); /* These are mostly to get the right device names for the clock lookups */ static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, - "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, - "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, - "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, - "gpio.3", NULL), - OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, - "pinctrl-stn8815", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, - "uart0", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, - "uart1", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, - "rng", NULL), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, - "rtc-pl031", NULL), OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, - "fsmc-nand", &cpu8815_nand_data), + NULL, &cpu8815_nand_data), OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, - "mmci", &mmcsd_plat_data), + NULL, &mmcsd_plat_data), { /* sentinel */ }, }; @@ -311,7 +249,6 @@ static void __init cpu8815_init_of(void) /* At full speed latency must be >=2, so 0x249 in low bits */ l2x0_of_init(0x00730249, 0xfe000fff); #endif - pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); of_platform_populate(NULL, of_default_bus_match_table, cpu8815_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 8f3bf4e50908..bbd6a3f717e6 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -20,11 +20,12 @@ #include <linux/kernel.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/io.h> #include "clock.h" #include "clock36xx.h" - +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) /** * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering @@ -39,29 +40,28 @@ */ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) { - struct clk_hw_omap *parent; + struct clk_divider *parent; struct clk_hw *parent_hw; - u32 dummy_v, orig_v, clksel_shift; + u32 dummy_v, orig_v; int ret; /* Clear PWRDN bit of HSDIVIDER */ ret = omap2_dflt_clk_enable(clk); parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_hw_omap(parent_hw); + parent = to_clk_divider(parent_hw); /* Restore the dividers */ if (!ret) { - clksel_shift = __ffs(parent->clksel_mask); - orig_v = __raw_readl(parent->clksel_reg); + orig_v = __raw_readl(parent->reg); dummy_v = orig_v; /* Write any other value different from the Read value */ - dummy_v ^= (1 << clksel_shift); - __raw_writel(dummy_v, parent->clksel_reg); + dummy_v ^= (1 << parent->shift); + __raw_writel(dummy_v, parent->reg); /* Write the original divider */ - __raw_writel(orig_v, parent->clksel_reg); + __raw_writel(orig_v, parent->reg); } return ret; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 075f7cc51026..69337af748cc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = { }, }; +/* uart2 */ +static struct omap_hwmod_dma_info uart2_edma_reqs[] = { + { .name = "tx", .dma_req = 28, }, + { .name = "rx", .dma_req = 29, }, + { .dma_req = -1 } +}; + static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = { { .irq = 73 + OMAP_INTC_START, }, { .irq = -1 }, @@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .clkdm_name = "l4ls_clkdm", .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, - .sdma_reqs = uart1_edma_reqs, + .sdma_reqs = uart2_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c01859398b54..5a2d8034c8de 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - if (omap3_has_iva()) - omap3_iva_idle(); + /* + * We need to idle iva2_pwrdm even on am3703 with no iva2. + */ + omap3_iva_idle(); omap3_d2d_idle(); } diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 9936c180bf01..8f595c0cc8d9 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void) struct device_node *np; np = of_find_matching_node(NULL, pwrc_ids); - if (!np) - panic("unable to find compatible pwrc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf pwrc node in dtb\n"); + return -ENOENT; + } /* * pwrc behind rtciobrg is not located in memory space diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 435019ca0a48..d5e0cbc934c0 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void) struct device_node *np; np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf rstc node in dtb\n"); + return -ENOENT; + } sirfsoc_rstc_base = of_iomap(np, 0); if (!sirfsoc_rstc_base) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2f7088bfd22..e52d5e42af4e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -490,6 +490,18 @@ config MACH_SMDK2416 help Say Y here if you are using an SMDK2416 +config MACH_S3C2416_DT + bool "Samsung S3C2416 machine using devicetree" + select CLKSRC_OF + select USE_OF + select PINCTRL + select PINCTRL_S3C24XX + help + Machine support for Samsung S3C2416 machines with device tree enabled. + Select this if a fdt blob is available for the S3C2416 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endif # CPU_S3C2416 if CPU_S3C2440 diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6f46ecfc8396..6de730bada4d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c new file mode 100644 index 000000000000..f5c9072e1e35 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -0,0 +1,91 @@ +/* + * Samsung's S3C2416 flattened device tree enabled machine + * + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on mach-exynos/mach-exynos4-dt.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the S3C2416 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0, + "s3c2440-uart.0", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1, + "s3c2440-uart.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2, + "s3c2440-uart.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3, + "s3c2440-uart.3", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, + "s3c-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, + "s3c-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, + "s3c2440-i2c.0", NULL), + {}, +}; + +static void __init s3c2416_dt_map_io(void) +{ + s3c24xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); +} + +static void __init s3c2416_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + s3c2416_auxdata_lookup, NULL); + + s3c_pm_init(); +} + +static char const *s3c2416_dt_compat[] __initdata = { + "samsung,s3c2416", + "samsung,s3c2450", + NULL +}; + +DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") + /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ + .dt_compat = s3c2416_dt_compat, + .map_io = s3c2416_dt_map_io, + .init_irq = irqchip_init, + .init_machine = s3c2416_dt_machine_init, + .init_time = clocksource_of_init, + .restart = s3c2416_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1a517e2fe449..c6fb9ec8d15b 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -129,6 +129,20 @@ config MACH_ARMADILLO800EVA select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF +config MACH_ARMADILLO800EVA_REFERENCE + bool "Armadillo-800 EVA board - Reference Device Tree Implementation" + depends on ARCH_R8A7740 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_WM8978 if SND_SIMPLE_CARD + select USE_OF + ---help--- + Use reference implementation of Aramdillo800 EVA board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_BOCKW bool "BOCK-W platform" depends on ARCH_R8A7778 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 068f1dadc46b..812de0452307 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o +obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c new file mode 100644 index 000000000000..03b85fec2ddb --- /dev/null +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -0,0 +1,213 @@ +/* + * armadillo 800 eva board support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/pinctrl/machine.h> +#include <mach/common.h> +#include <mach/r8a7740.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +/* + * CON1 Camera Module + * CON2 Extension Bus + * CON3 HDMI Output + * CON4 Composite Video Output + * CON5 H-UDI JTAG + * CON6 ARM JTAG + * CON7 SD1 + * CON8 SD2 + * CON9 RTC BackUp + * CON10 Monaural Mic Input + * CON11 Stereo Headphone Output + * CON12 Audio Line Output(L) + * CON13 Audio Line Output(R) + * CON14 AWL13 Module + * CON15 Extension + * CON16 LCD1 + * CON17 LCD2 + * CON19 Power Input + * CON20 USB1 + * CON21 USB2 + * CON22 Serial + * CON23 LAN + * CON24 USB3 + * LED1 Camera LED(Yellow) + * LED2 Power LED (Green) + * ED3-LED6 User LED(Yellow) + * LED7 LAN link LED(Green) + * LED8 LAN activity LED(Yellow) + */ + +/* + * DipSwitch + * + * SW1 + * + * -12345678-+---------------+---------------------------- + * 1 | boot | hermit + * 0 | boot | OS auto boot + * -12345678-+---------------+---------------------------- + * 00 | boot device | eMMC + * 10 | boot device | SDHI0 (CON7) + * 01 | boot device | - + * 11 | boot device | Extension Buss (CS0) + * -12345678-+---------------+---------------------------- + * 0 | Extension Bus | D8-D15 disable, eMMC enable + * 1 | Extension Bus | D8-D15 enable, eMMC disable + * -12345678-+---------------+---------------------------- + * 0 | SDHI1 | COM8 disable, COM14 enable + * 1 | SDHI1 | COM8 enable, COM14 disable + * -12345678-+---------------+---------------------------- + * 0 | USB0 | COM20 enable, COM24 disable + * 1 | USB0 | COM20 disable, COM24 enable + * -12345678-+---------------+---------------------------- + * 00 | JTAG | SH-X2 + * 10 | JTAG | ARM + * 01 | JTAG | - + * 11 | JTAG | Boundary Scan + *-----------+---------------+---------------------------- + */ + +/* + * FSI-WM8978 + * + * this command is required when playback. + * + * # amixer set "Headphone" 50 + * + * this command is required when capture. + * + * # amixer set "Input PGA" 15 + * # amixer set "Left Input Mixer MicP" on + * # amixer set "Left Input Mixer MicN" on + * # amixer set "Right Input Mixer MicN" on + * # amixer set "Right Input Mixer MicP" on + */ + +/* + * USB function + * + * When you use USB Function, + * set SW1.6 ON, and connect cable to CN24. + * + * USBF needs workaround on R8A7740 chip. + * These are a little bit complex. + * see + * usbhsf_power_ctrl() + */ + +static const struct pinctrl_map eva_pinctrl_map[] = { + /* SCIFA1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", + "scifa1_data", "scifa1"), +}; + +static void __init eva_clock_init(void) +{ + struct clk *system = clk_get(NULL, "system_clk"); + struct clk *xtal1 = clk_get(NULL, "extal1"); + struct clk *usb24s = clk_get(NULL, "usb24s"); + struct clk *fsibck = clk_get(NULL, "fsibck"); + + if (IS_ERR(system) || + IS_ERR(xtal1) || + IS_ERR(usb24s) || + IS_ERR(fsibck)) { + pr_err("armadillo800eva board clock init failed\n"); + goto clock_error; + } + + /* armadillo 800 eva extal1 is 24MHz */ + clk_set_rate(xtal1, 24000000); + + /* usb24s use extal1 (= system) clock (= 24MHz) */ + clk_set_parent(usb24s, system); + + /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ + clk_set_rate(fsibck, 12288000); + +clock_error: + if (!IS_ERR(system)) + clk_put(system); + if (!IS_ERR(xtal1)) + clk_put(xtal1); + if (!IS_ERR(usb24s)) + clk_put(usb24s); + if (!IS_ERR(fsibck)) + clk_put(fsibck); +} + +/* + * board init + */ +static void __init eva_init(void) +{ + + r8a7740_clock_init(MD_CK0 | MD_CK2); + eva_clock_init(); + + pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + r8a7740_pinmux_init(); + + r8a7740_meram_workaround(); + + /* + * Touchscreen + * TODO: Move reset GPIO over to .dts when we can reference it + */ + gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); +#endif + + r8a7740_add_standard_devices_dt(); + r8a7740_pm_init(); +} + +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + +static const char *eva_boards_compat_dt[] __initdata = { + "renesas,armadillo800eva-reference", + NULL, +}; + +DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") + .map_io = r8a7740_map_io, + .init_early = r8a7740_init_delay, + .init_irq = r8a7740_init_irq_of, + .init_machine = eva_init, + .init_time = shmobile_timer_init, + .init_late = shmobile_init_late, + .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index abdc4d4efa28..1cf6869b656a 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -533,10 +533,13 @@ enum { }; extern void r8a7740_meram_workaround(void); +extern void r8a7740_init_delay(void); extern void r8a7740_init_irq(void); +extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); +extern void r8a7740_add_standard_devices_dt(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7740_pm_init(void); diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index b741c8409a5a..8871f7717dc8 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -20,19 +20,15 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> -void __init r8a7740_init_irq(void) +static void __init r8a7740_init_irq_common(void) { - void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); - /* initialize the Generic Interrupt Controller PL390 r0p0 */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - /* route signals to GIC */ iowrite32(0x0, pfc_inta_ctrl); @@ -54,3 +50,19 @@ void __init r8a7740_init_irq(void) iounmap(intc_msk_base); iounmap(pfc_inta_ctrl); } + +void __init r8a7740_init_irq_of(void) +{ + irqchip_init(); + r8a7740_init_irq_common(); +} + +void __init r8a7740_init_irq(void) +{ + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + + /* initialize the Generic Interrupt Controller PL390 r0p0 */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + r8a7740_init_irq_common(); +} diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 326a4ab0bd5f..9284e6fdb0c8 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -531,11 +531,7 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *r8a7740_early_devices[] __initdata = { - &irqpin0_device, - &irqpin1_device, - &irqpin2_device, - &irqpin3_device, +static struct platform_device *r8a7740_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -546,6 +542,13 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &scif7_device, &scifb_device, &cmt10_device, +}; + +static struct platform_device *r8a7740_early_devices[] __initdata = { + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, &tmu00_device, &tmu01_device, &tmu02_device, @@ -965,6 +968,8 @@ void __init r8a7740_add_standard_devices(void) /* add devices */ platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); platform_add_devices(r8a7740_late_devices, ARRAY_SIZE(r8a7740_late_devices)); @@ -986,6 +991,8 @@ void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + early_platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); /* setup early console here as well */ shmobile_setup_console(); @@ -993,33 +1000,29 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init r8a7740_add_early_devices_dt(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ - - early_platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { { } }; void __init r8a7740_add_standard_devices_dt(void) { - /* clocks are setup late during boot in the case of DT */ - r8a7740_clock_init(0); - - platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - + platform_add_devices(r8a7740_devices_dt, + ARRAY_SIZE(r8a7740_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, r8a7740_auxdata_lookup, NULL); } +void __init r8a7740_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +}; + +static void __init r8a7740_generic_init(void) +{ + r8a7740_clock_init(0); + r8a7740_add_standard_devices_dt(); +} + static const char *r8a7740_boards_compat_dt[] __initdata = { "renesas,r8a7740", NULL, @@ -1027,9 +1030,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_add_early_devices_dt, - .init_irq = r8a7740_init_irq, - .init_machine = r8a7740_add_standard_devices_dt, + .init_early = r8a7740_init_delay, + .init_irq = r8a7740_init_irq_of, + .init_machine = r8a7740_generic_init, + .init_time = shmobile_timer_init, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 46cca52890bc..7669a49fb6fb 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -274,11 +274,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), + OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), + OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), + OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", + NULL), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, @@ -292,6 +297,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { {}, }; +static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + {}, +}; + static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, @@ -318,8 +333,13 @@ static void __init u8500_init_machine(void) /* TODO: Export SoC, USB, cpu-freq and DMA40 */ parent = u8500_of_init_devices(); - /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); + /* automatically probe child nodes of dbx5x0 devices */ + if (of_machine_is_compatible("st-ericsson,u8540")) + of_platform_populate(NULL, u8500_local_bus_nodes, + u8540_auxdata_lookup, parent); + else + of_platform_populate(NULL, u8500_local_bus_nodes, + u8500_auxdata_lookup, parent); } static const char * stericsson_dt_platform_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5bfe7035b73d..7e3d5f400aad 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -98,7 +98,6 @@ static void zynq_system_reset(char mode, const char *cmd) } static const char * const zynq_dt_match[] = { - "xlnx,zynq-zc702", "xlnx,zynq-7000", NULL }; diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index c70969b9c258..50d008d8f87f 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -117,7 +117,7 @@ int __init zynq_slcr_init(void) pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); - xilinx_zynq_clocks_init(zynq_slcr_base); + zynq_clock_init(zynq_slcr_base); of_node_put(np); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 53210ec4e8ec..bd7124c87fea 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/of.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state) * require a full power-cycle) */ - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + if (!of_have_populated_dt() && + !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { printk(KERN_ERR "%s: No wake-up sources!\n", __func__); printk(KERN_ERR "%s: Aborting sleep\n", __func__); @@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - samsung_pm_save_gpios(); - samsung_pm_saved_gpios(); + if (!of_have_populated_dt()) { + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); + } + s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - samsung_pm_restore_gpios(); - s3c_pm_restored_gpios(); + + if (!of_have_populated_dt()) { + samsung_pm_restore_gpios(); + s3c_pm_restored_gpios(); + } s3c_pm_debug_init(); diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 820116067c10..516e6e9a5594 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -117,7 +117,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) if (! ((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); -#ifdef CONFIG_VIRTUALIZATION +#ifdef CONFIG_KVM kvm_local_flush_tlb_all(); /* start new asid cycle */ #else local_flush_tlb_all(); /* start new asid cycle */ diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 3f424f5217da..f09ff5ae2059 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -58,56 +58,53 @@ struct kvm_fpu { * bits[2..0] - Register 'sel' index. * bits[7..3] - Register 'rd' index. * bits[15..8] - Must be zero. - * bits[63..16] - 1 -> CP0 registers. + * bits[31..16] - 1 -> CP0 registers. + * bits[51..32] - Must be zero. + * bits[63..52] - As per linux/kvm.h * * Other sets registers may be added in the future. Each set would - * have its own identifier in bits[63..16]. - * - * The addr field of struct kvm_one_reg must point to an aligned - * 64-bit wide location. For registers that are narrower than - * 64-bits, the value is stored in the low order bits of the location, - * and sign extended to 64-bits. + * have its own identifier in bits[31..16]. * * The registers defined in struct kvm_regs are also accessible, the * id values for these are below. */ -#define KVM_REG_MIPS_R0 0 -#define KVM_REG_MIPS_R1 1 -#define KVM_REG_MIPS_R2 2 -#define KVM_REG_MIPS_R3 3 -#define KVM_REG_MIPS_R4 4 -#define KVM_REG_MIPS_R5 5 -#define KVM_REG_MIPS_R6 6 -#define KVM_REG_MIPS_R7 7 -#define KVM_REG_MIPS_R8 8 -#define KVM_REG_MIPS_R9 9 -#define KVM_REG_MIPS_R10 10 -#define KVM_REG_MIPS_R11 11 -#define KVM_REG_MIPS_R12 12 -#define KVM_REG_MIPS_R13 13 -#define KVM_REG_MIPS_R14 14 -#define KVM_REG_MIPS_R15 15 -#define KVM_REG_MIPS_R16 16 -#define KVM_REG_MIPS_R17 17 -#define KVM_REG_MIPS_R18 18 -#define KVM_REG_MIPS_R19 19 -#define KVM_REG_MIPS_R20 20 -#define KVM_REG_MIPS_R21 21 -#define KVM_REG_MIPS_R22 22 -#define KVM_REG_MIPS_R23 23 -#define KVM_REG_MIPS_R24 24 -#define KVM_REG_MIPS_R25 25 -#define KVM_REG_MIPS_R26 26 -#define KVM_REG_MIPS_R27 27 -#define KVM_REG_MIPS_R28 28 -#define KVM_REG_MIPS_R29 29 -#define KVM_REG_MIPS_R30 30 -#define KVM_REG_MIPS_R31 31 +#define KVM_REG_MIPS_R0 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_R1 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 1) +#define KVM_REG_MIPS_R2 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 2) +#define KVM_REG_MIPS_R3 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 3) +#define KVM_REG_MIPS_R4 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 4) +#define KVM_REG_MIPS_R5 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 5) +#define KVM_REG_MIPS_R6 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 6) +#define KVM_REG_MIPS_R7 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 7) +#define KVM_REG_MIPS_R8 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 8) +#define KVM_REG_MIPS_R9 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 9) +#define KVM_REG_MIPS_R10 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 10) +#define KVM_REG_MIPS_R11 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 11) +#define KVM_REG_MIPS_R12 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 12) +#define KVM_REG_MIPS_R13 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 13) +#define KVM_REG_MIPS_R14 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 14) +#define KVM_REG_MIPS_R15 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 15) +#define KVM_REG_MIPS_R16 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 16) +#define KVM_REG_MIPS_R17 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 17) +#define KVM_REG_MIPS_R18 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 18) +#define KVM_REG_MIPS_R19 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 19) +#define KVM_REG_MIPS_R20 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 20) +#define KVM_REG_MIPS_R21 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 21) +#define KVM_REG_MIPS_R22 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 22) +#define KVM_REG_MIPS_R23 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 23) +#define KVM_REG_MIPS_R24 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 24) +#define KVM_REG_MIPS_R25 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 25) +#define KVM_REG_MIPS_R26 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 26) +#define KVM_REG_MIPS_R27 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 27) +#define KVM_REG_MIPS_R28 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 28) +#define KVM_REG_MIPS_R29 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 29) +#define KVM_REG_MIPS_R30 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 30) +#define KVM_REG_MIPS_R31 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 31) -#define KVM_REG_MIPS_HI 32 -#define KVM_REG_MIPS_LO 33 -#define KVM_REG_MIPS_PC 34 +#define KVM_REG_MIPS_HI (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 32) +#define KVM_REG_MIPS_LO (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 33) +#define KVM_REG_MIPS_PC (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 34) /* * KVM MIPS specific structures and definitions diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index cf5509f13dd5..dba90ec0dc38 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -25,12 +25,16 @@ #define MCOUNT_OFFSET_INSNS 4 #endif +#ifdef CONFIG_DYNAMIC_FTRACE + /* Arch override because MIPS doesn't need to run this from stop_machine() */ void arch_ftrace_update_code(int command) { ftrace_modify_all_code(command); } +#endif + /* * Check if the address is in kernel space * diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 3b09b888afa9..0c655deeea4a 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -93,26 +93,27 @@ static void rm7k_wait_irqoff(void) } /* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! + * Au1 'wait' is only useful when the 32kHz counter is used as timer, + * since coreclock (and the cp0 counter) stops upon executing it. Only an + * interrupt can wake it, so they must be enabled before entering idle modes. */ static void au1k_wait(void) { + unsigned long c0status = read_c0_status() | 1; /* irqs on */ + __asm__( " .set mips3 \n" " cache 0x14, 0(%0) \n" " cache 0x14, 32(%0) \n" " sync \n" - " nop \n" + " mtc0 %1, $12 \n" /* wr c0status */ " wait \n" " nop \n" " nop \n" " nop \n" " nop \n" " .set mips0 \n" - : : "r" (au1k_wait)); - local_irq_enable(); + : : "r" (au1k_wait), "r" (c0status)); } static int __initdata nowait; diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index d934b017f479..dd203e59e6fd 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -485,29 +485,35 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -ENOIOCTLCMD; } -#define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) -#define KVM_REG_MIPS_CP0_ENTRYLO0 (0x10000 + 8 * 2 + 0) -#define KVM_REG_MIPS_CP0_ENTRYLO1 (0x10000 + 8 * 3 + 0) -#define KVM_REG_MIPS_CP0_CONTEXT (0x10000 + 8 * 4 + 0) -#define KVM_REG_MIPS_CP0_USERLOCAL (0x10000 + 8 * 4 + 2) -#define KVM_REG_MIPS_CP0_PAGEMASK (0x10000 + 8 * 5 + 0) -#define KVM_REG_MIPS_CP0_PAGEGRAIN (0x10000 + 8 * 5 + 1) -#define KVM_REG_MIPS_CP0_WIRED (0x10000 + 8 * 6 + 0) -#define KVM_REG_MIPS_CP0_HWRENA (0x10000 + 8 * 7 + 0) -#define KVM_REG_MIPS_CP0_BADVADDR (0x10000 + 8 * 8 + 0) -#define KVM_REG_MIPS_CP0_COUNT (0x10000 + 8 * 9 + 0) -#define KVM_REG_MIPS_CP0_ENTRYHI (0x10000 + 8 * 10 + 0) -#define KVM_REG_MIPS_CP0_COMPARE (0x10000 + 8 * 11 + 0) -#define KVM_REG_MIPS_CP0_STATUS (0x10000 + 8 * 12 + 0) -#define KVM_REG_MIPS_CP0_CAUSE (0x10000 + 8 * 13 + 0) -#define KVM_REG_MIPS_CP0_EBASE (0x10000 + 8 * 15 + 1) -#define KVM_REG_MIPS_CP0_CONFIG (0x10000 + 8 * 16 + 0) -#define KVM_REG_MIPS_CP0_CONFIG1 (0x10000 + 8 * 16 + 1) -#define KVM_REG_MIPS_CP0_CONFIG2 (0x10000 + 8 * 16 + 2) -#define KVM_REG_MIPS_CP0_CONFIG3 (0x10000 + 8 * 16 + 3) -#define KVM_REG_MIPS_CP0_CONFIG7 (0x10000 + 8 * 16 + 7) -#define KVM_REG_MIPS_CP0_XCONTEXT (0x10000 + 8 * 20 + 0) -#define KVM_REG_MIPS_CP0_ERROREPC (0x10000 + 8 * 30 + 0) +#define MIPS_CP0_32(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U32 | 0x10000 | (8 * (_R) + (_S))) + +#define MIPS_CP0_64(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0x10000 | (8 * (_R) + (_S))) + +#define KVM_REG_MIPS_CP0_INDEX MIPS_CP0_32(0, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 MIPS_CP0_64(2, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 MIPS_CP0_64(3, 0) +#define KVM_REG_MIPS_CP0_CONTEXT MIPS_CP0_64(4, 0) +#define KVM_REG_MIPS_CP0_USERLOCAL MIPS_CP0_64(4, 2) +#define KVM_REG_MIPS_CP0_PAGEMASK MIPS_CP0_32(5, 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN MIPS_CP0_32(5, 1) +#define KVM_REG_MIPS_CP0_WIRED MIPS_CP0_32(6, 0) +#define KVM_REG_MIPS_CP0_HWRENA MIPS_CP0_32(7, 0) +#define KVM_REG_MIPS_CP0_BADVADDR MIPS_CP0_64(8, 0) +#define KVM_REG_MIPS_CP0_COUNT MIPS_CP0_32(9, 0) +#define KVM_REG_MIPS_CP0_ENTRYHI MIPS_CP0_64(10, 0) +#define KVM_REG_MIPS_CP0_COMPARE MIPS_CP0_32(11, 0) +#define KVM_REG_MIPS_CP0_STATUS MIPS_CP0_32(12, 0) +#define KVM_REG_MIPS_CP0_CAUSE MIPS_CP0_32(13, 0) +#define KVM_REG_MIPS_CP0_EBASE MIPS_CP0_64(15, 1) +#define KVM_REG_MIPS_CP0_CONFIG MIPS_CP0_32(16, 0) +#define KVM_REG_MIPS_CP0_CONFIG1 MIPS_CP0_32(16, 1) +#define KVM_REG_MIPS_CP0_CONFIG2 MIPS_CP0_32(16, 2) +#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3) +#define KVM_REG_MIPS_CP0_CONFIG7 MIPS_CP0_32(16, 7) +#define KVM_REG_MIPS_CP0_XCONTEXT MIPS_CP0_64(20, 0) +#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0) static u64 kvm_mips_get_one_regs[] = { KVM_REG_MIPS_R0, @@ -567,8 +573,6 @@ static u64 kvm_mips_get_one_regs[] = { static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { - u64 __user *uaddr = (u64 __user *)(long)reg->addr; - struct mips_coproc *cop0 = vcpu->arch.cop0; s64 v; @@ -631,18 +635,39 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, default: return -EINVAL; } - return put_user(v, uaddr); + if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) { + u64 __user *uaddr64 = (u64 __user *)(long)reg->addr; + return put_user(v, uaddr64); + } else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) { + u32 __user *uaddr32 = (u32 __user *)(long)reg->addr; + u32 v32 = (u32)v; + return put_user(v32, uaddr32); + } else { + return -EINVAL; + } } static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { - u64 __user *uaddr = (u64 __user *)(long)reg->addr; struct mips_coproc *cop0 = vcpu->arch.cop0; u64 v; - if (get_user(v, uaddr) != 0) - return -EFAULT; + if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) { + u64 __user *uaddr64 = (u64 __user *)(long)reg->addr; + + if (get_user(v, uaddr64) != 0) + return -EFAULT; + } else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) { + u32 __user *uaddr32 = (u32 __user *)(long)reg->addr; + s32 v32; + + if (get_user(v32, uaddr32) != 0) + return -EFAULT; + v = (s64)v32; + } else { + return -EINVAL; + } switch (reg->id) { case KVM_REG_MIPS_R0: diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 26807e5aff51..6f3887d884d2 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -176,6 +176,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_CFAR LONG_ASM_CONST(0x0100000000000000) #define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000) #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) +#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #ifndef __ASSEMBLY__ @@ -394,19 +395,20 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \ CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \ - CPU_FTR_HVMODE) + CPU_FTR_HVMODE | CPU_FTR_DABRX) #define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX) #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \ + CPU_FTR_DABRX) #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -415,7 +417,7 @@ extern const char *powerpc_base_platform; CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \ - CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR) + CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX) #define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -430,14 +432,15 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \ - CPU_FTR_UNALIGNED_LD_STD) + CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX) #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_PURR | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX) #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \ - CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX) + CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_ICSWX | CPU_FTR_DABRX ) #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 8e5fae8beaf6..46793b58a761 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -513,7 +513,7 @@ label##_common: \ */ #define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \ EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \ - FINISH_NAP;RUNLATCH_ON;DISABLE_INTS) + FINISH_NAP;DISABLE_INTS;RUNLATCH_ON) /* * When the idle code in power4_idle puts the CPU into NAP mode, diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index b9dd382cb349..851bac7afa4b 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -54,8 +54,16 @@ #define BOOKE_INTERRUPT_DEBUG 15 /* E500 */ -#define BOOKE_INTERRUPT_SPE_UNAVAIL 32 -#define BOOKE_INTERRUPT_SPE_FP_DATA 33 +#define BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL 32 +#define BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST 33 +/* + * TODO: Unify 32-bit and 64-bit kernel exception handlers to use same defines + */ +#define BOOKE_INTERRUPT_SPE_UNAVAIL BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL +#define BOOKE_INTERRUPT_SPE_FP_DATA BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST +#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL +#define BOOKE_INTERRUPT_ALTIVEC_ASSIST \ + BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST #define BOOKE_INTERRUPT_SPE_FP_ROUND 34 #define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35 #define BOOKE_INTERRUPT_DOORBELL 36 @@ -67,10 +75,6 @@ #define BOOKE_INTERRUPT_HV_SYSCALL 40 #define BOOKE_INTERRUPT_HV_PRIV 41 -/* altivec */ -#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL 42 -#define BOOKE_INTERRUPT_ALTIVEC_ASSIST 43 - /* book3s */ #define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1f0937d7d4b5..2a45d0f04385 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -452,8 +452,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .mmu_features = MMU_FTRS_POWER8, .icache_bsize = 128, .dcache_bsize = 128, - .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = 0, + .oprofile_type = PPC_OPROFILE_INVALID, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,8 +506,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = 0, - .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/power8", + .oprofile_type = PPC_OPROFILE_INVALID, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 246b11c4fe7e..8741c854e03d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,20 +465,6 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) - - /* PMU registers made user read/(write) by EBB */ - mfspr r0, SPRN_SIAR - std r0, THREAD_SIAR(r3) - mfspr r0, SPRN_SDAR - std r0, THREAD_SDAR(r3) - mfspr r0, SPRN_SIER - std r0, THREAD_SIER(r3) - mfspr r0, SPRN_MMCR0 - std r0, THREAD_MMCR0(r3) - mfspr r0, SPRN_MMCR2 - std r0, THREAD_MMCR2(r3) - mfspr r0, SPRN_MMCRA - std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -581,20 +567,6 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 - /* PMU registers made user read/(write) by EBB */ - ld r0, THREAD_SIAR(r4) - mtspr SPRN_SIAR, r0 - ld r0, THREAD_SDAR(r4) - mtspr SPRN_SDAR, r0 - ld r0, THREAD_SIER(r4) - mtspr SPRN_SIER, r0 - ld r0, THREAD_MMCR0(r4) - mtspr SPRN_MMCR0, r0 - ld r0, THREAD_MMCR2(r4) - mtspr SPRN_MMCR2, r0 - ld r0, THREAD_MMCRA(r4) - mtspr SPRN_MMCRA, r0 - ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e6eba1bf61ad..40e4a17c8ba0 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -454,38 +454,14 @@ BEGIN_FTR_SECTION xori r10,r10,(MSR_FE0|MSR_FE1) mtmsrd r10 sync - fmr 0,0 - fmr 1,1 - fmr 2,2 - fmr 3,3 - fmr 4,4 - fmr 5,5 - fmr 6,6 - fmr 7,7 - fmr 8,8 - fmr 9,9 - fmr 10,10 - fmr 11,11 - fmr 12,12 - fmr 13,13 - fmr 14,14 - fmr 15,15 - fmr 16,16 - fmr 17,17 - fmr 18,18 - fmr 19,19 - fmr 20,20 - fmr 21,21 - fmr 22,22 - fmr 23,23 - fmr 24,24 - fmr 25,25 - fmr 26,26 - fmr 27,27 - fmr 28,28 - fmr 29,29 - fmr 30,30 - fmr 31,31 + +#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 +#define FMR4(n) FMR2(n) ; FMR2(n+2) +#define FMR8(n) FMR4(n) ; FMR4(n+4) +#define FMR16(n) FMR8(n) ; FMR8(n+8) +#define FMR32(n) FMR16(n) ; FMR16(n+16) + FMR32(0) + FTR_SECTION_ELSE /* * To denormalise we need to move a copy of the register to itself. @@ -495,39 +471,25 @@ FTR_SECTION_ELSE oris r10,r10,MSR_VSX@h mtmsrd r10 sync - XVCPSGNDP(0,0,0) - XVCPSGNDP(1,1,1) - XVCPSGNDP(2,2,2) - XVCPSGNDP(3,3,3) - XVCPSGNDP(4,4,4) - XVCPSGNDP(5,5,5) - XVCPSGNDP(6,6,6) - XVCPSGNDP(7,7,7) - XVCPSGNDP(8,8,8) - XVCPSGNDP(9,9,9) - XVCPSGNDP(10,10,10) - XVCPSGNDP(11,11,11) - XVCPSGNDP(12,12,12) - XVCPSGNDP(13,13,13) - XVCPSGNDP(14,14,14) - XVCPSGNDP(15,15,15) - XVCPSGNDP(16,16,16) - XVCPSGNDP(17,17,17) - XVCPSGNDP(18,18,18) - XVCPSGNDP(19,19,19) - XVCPSGNDP(20,20,20) - XVCPSGNDP(21,21,21) - XVCPSGNDP(22,22,22) - XVCPSGNDP(23,23,23) - XVCPSGNDP(24,24,24) - XVCPSGNDP(25,25,25) - XVCPSGNDP(26,26,26) - XVCPSGNDP(27,27,27) - XVCPSGNDP(28,28,28) - XVCPSGNDP(29,29,29) - XVCPSGNDP(30,30,30) - XVCPSGNDP(31,31,31) + +#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) +#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) +#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) +#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) +#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) + XVCPSGNDP32(0) + ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) + +BEGIN_FTR_SECTION + b denorm_done +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER8 we need to do that for all 64 VSX registers + */ + XVCPSGNDP32(32) +denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) @@ -721,7 +683,7 @@ machine_check_common: STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) + STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt) STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) #ifdef CONFIG_PPC_DOORBELL STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5cbcf4d5a808..ea185e0b3cae 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -162,7 +162,7 @@ notrace unsigned int __check_irq_replay(void) * in case we also had a rollover while hard disabled */ local_paca->irq_happened &= ~PACA_IRQ_DEC; - if (decrementer_check_overflow()) + if ((happened & PACA_IRQ_DEC) || decrementer_check_overflow()) return 0x900; /* Finally check if an external interrupt happened */ diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7f2273cc3c7d..eabeec991016 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -827,6 +827,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev) } for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { struct resource *res = dev->resource + i; + struct pci_bus_region reg; if (!res->flags) continue; @@ -835,8 +836,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev) * at 0 as unset as well, except if PCI_PROBE_ONLY is also set * since in that case, we don't want to re-assign anything */ + pcibios_resource_to_bus(dev, ®, res); if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || - (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { + (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { /* Only print message if not re-assigning */ if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] " diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a902723fdc69..076d1242507a 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -399,7 +399,8 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) { mtspr(SPRN_DABR, dabr); - mtspr(SPRN_DABRX, dabrx); + if (cpu_has_feature(CPU_FTR_DABRX)) + mtspr(SPRN_DABRX, dabrx); return 0; } #else @@ -1368,7 +1369,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) #ifdef CONFIG_PPC64 /* Called with hard IRQs off */ -void __ppc64_runlatch_on(void) +void notrace __ppc64_runlatch_on(void) { struct thread_info *ti = current_thread_info(); unsigned long ctrl; @@ -1381,7 +1382,7 @@ void __ppc64_runlatch_on(void) } /* Called with hard IRQs off */ -void __ppc64_runlatch_off(void) +void notrace __ppc64_runlatch_off(void) { struct thread_info *ti = current_thread_info(); unsigned long ctrl; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f18c79c324ef..c0e5caf8ccc7 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1165,6 +1165,16 @@ bail: exception_exit(prev_state); } +/* + * This occurs when running in hypervisor mode on POWER6 or later + * and an illegal instruction is encountered. + */ +void __kprobes emulation_assist_interrupt(struct pt_regs *regs) +{ + regs->msr |= REASON_ILLEGAL; + program_check_exception(regs); +} + void alignment_exception(struct pt_regs *regs) { enum ctx_state prev_state = exception_enter(); diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 5dd3ab469976..ed0385448148 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -441,6 +441,7 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu); struct kvmppc_44x_tlbe *tlbe; unsigned int gtlb_index; + int idx; gtlb_index = kvmppc_get_gpr(vcpu, ra); if (gtlb_index >= KVM44x_GUEST_TLB_SIZE) { @@ -473,6 +474,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) return EMULATE_FAIL; } + idx = srcu_read_lock(&vcpu->kvm->srcu); + if (tlbe_is_host_safe(vcpu, tlbe)) { gva_t eaddr; gpa_t gpaddr; @@ -489,6 +492,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); + trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1, tlbe->word2); diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 1020119226db..5cd7ad0c1176 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -832,6 +832,18 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, { int r = RESUME_HOST; int s; + int idx; + +#ifdef CONFIG_PPC64 + WARN_ON(local_paca->irq_happened != 0); +#endif + + /* + * We enter with interrupts disabled in hardware, but + * we need to call hard_irq_disable anyway to ensure that + * the software state is kept in sync. + */ + hard_irq_disable(); /* update before a new last_exit_type is rewritten */ kvmppc_update_timing_stats(vcpu); @@ -1053,6 +1065,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, break; } + idx = srcu_read_lock(&vcpu->kvm->srcu); + gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr); gfn = gpaddr >> PAGE_SHIFT; @@ -1075,6 +1089,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_account_exit(vcpu, MMIO_EXITS); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } @@ -1098,6 +1113,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_account_exit(vcpu, ITLB_VIRT_MISS_EXITS); + idx = srcu_read_lock(&vcpu->kvm->srcu); + gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr); gfn = gpaddr >> PAGE_SHIFT; @@ -1114,6 +1131,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_MACHINE_CHECK); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } diff --git a/arch/powerpc/kvm/e500_mmu.c b/arch/powerpc/kvm/e500_mmu.c index c41a5a96b558..6d6f153b6c1d 100644 --- a/arch/powerpc/kvm/e500_mmu.c +++ b/arch/powerpc/kvm/e500_mmu.c @@ -396,6 +396,7 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) struct kvm_book3e_206_tlb_entry *gtlbe; int tlbsel, esel; int recal = 0; + int idx; tlbsel = get_tlb_tlbsel(vcpu); esel = get_tlb_esel(vcpu, tlbsel); @@ -430,6 +431,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) kvmppc_set_tlb1map_range(vcpu, gtlbe); } + idx = srcu_read_lock(&vcpu->kvm->srcu); + /* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */ if (tlbe_is_host_safe(vcpu, gtlbe)) { u64 eaddr = get_tlb_eaddr(gtlbe); @@ -444,6 +447,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) kvmppc_mmu_map(vcpu, eaddr, raddr, index_of(tlbsel, esel)); } + srcu_read_unlock(&vcpu->kvm->srcu, idx); + kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS); return EMULATE_DONE; } diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c index 753cc99eff2b..19c8379575f7 100644 --- a/arch/powerpc/kvm/e500mc.c +++ b/arch/powerpc/kvm/e500mc.c @@ -177,8 +177,6 @@ int kvmppc_core_check_processor_compat(void) r = 0; else if (strcmp(cur_cpu_spec->cpu_name, "e5500") == 0) r = 0; - else if (strcmp(cur_cpu_spec->cpu_name, "e6500") == 0) - r = 0; else r = -ENOTSUPP; diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 845c867444e6..29c6482890c8 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1758,7 +1758,7 @@ static void perf_event_interrupt(struct pt_regs *regs) } } } - if ((!found) && printk_ratelimit()) + if (!found && !nmi && printk_ratelimit()) printk(KERN_WARNING "Can't find PMC that caused IRQ\n"); /* diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 19506f935737..b456b157d33d 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -83,7 +83,11 @@ static int pseries_eeh_init(void) ibm_configure_pe = rtas_token("ibm,configure-pe"); ibm_configure_bridge = rtas_token("ibm,configure-bridge"); - /* necessary sanity check */ + /* + * Necessary sanity check. We needn't check "get-config-addr-info" + * and its variant since the old firmware probably support address + * of domain/bus/slot/function for EEH RTAS operations. + */ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n", __func__); @@ -102,12 +106,6 @@ static int pseries_eeh_init(void) pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n", __func__); return -EINVAL; - } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE && - ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and " - "<ibm,get-config-addr-info> invalid\n", - __func__); - return -EINVAL; } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service <ibm,configure-pe> and " diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index ac01463038f1..e8b6e5b8932c 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -623,7 +623,7 @@ static inline pgste_t pgste_get_lock(pte_t *ptep) " csg %0,%1,%2\n" " jl 0b\n" : "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE]) - : "Q" (ptep[PTRS_PER_PTE]) : "cc"); + : "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory"); #endif return __pgste(new); } @@ -635,11 +635,19 @@ static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) " nihh %1,0xff7f\n" /* clear RCP_PCL_BIT */ " stg %1,%0\n" : "=Q" (ptep[PTRS_PER_PTE]) - : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) : "cc"); + : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) + : "cc", "memory"); preempt_enable(); #endif } +static inline void pgste_set(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + *(pgste_t *)(ptep + PTRS_PER_PTE) = pgste; +#endif +} + static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE @@ -704,17 +712,19 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) { #ifdef CONFIG_PGSTE unsigned long address; - unsigned long okey, nkey; + unsigned long nkey; if (pte_val(entry) & _PAGE_INVALID) return; + VM_BUG_ON(!(pte_val(*ptep) & _PAGE_INVALID)); address = pte_val(entry) & PAGE_MASK; - okey = nkey = page_get_storage_key(address); - nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); - /* Set page access key and fetch protection bit from pgste */ - nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; - if (okey != nkey) - page_set_storage_key(address, nkey, 0); + /* + * Set page access key and fetch protection bit from pgste. + * The guest C/R information is still in the PGSTE, set real + * key C/R to 0. + */ + nkey = (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; + page_set_storage_key(address, nkey, 0); #endif } @@ -1099,8 +1109,10 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, if (!mm_exclusive(mm)) __ptep_ipte(address, ptep); - if (mm_has_pgste(mm)) + if (mm_has_pgste(mm)) { pgste = pgste_update_all(&pte, pgste); + pgste_set(ptep, pgste); + } return pte; } diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index 298297477257..87acc38f73c6 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -74,6 +74,8 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high) static void show_trace(struct task_struct *task, unsigned long *stack) { + const unsigned long frame_size = + STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); register unsigned long __r15 asm ("15"); unsigned long sp; @@ -82,11 +84,13 @@ static void show_trace(struct task_struct *task, unsigned long *stack) sp = task ? task->thread.ksp : __r15; printk("Call Trace:\n"); #ifdef CONFIG_CHECK_STACK - sp = __show_trace(sp, S390_lowcore.panic_stack - 4096, - S390_lowcore.panic_stack); + sp = __show_trace(sp, + S390_lowcore.panic_stack + frame_size - 4096, + S390_lowcore.panic_stack + frame_size); #endif - sp = __show_trace(sp, S390_lowcore.async_stack - ASYNC_SIZE, - S390_lowcore.async_stack); + sp = __show_trace(sp, + S390_lowcore.async_stack + frame_size - ASYNC_SIZE, + S390_lowcore.async_stack + frame_size); if (task) __show_trace(sp, (unsigned long) task_stack_page(task), (unsigned long) task_stack_page(task) + THREAD_SIZE); diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index f7fb58903f6a..408e866ae548 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -311,3 +311,67 @@ void measurement_alert_subclass_unregister(void) spin_unlock(&ma_subclass_lock); } EXPORT_SYMBOL(measurement_alert_subclass_unregister); + +void synchronize_irq(unsigned int irq) +{ + /* + * Not needed, the handler is protected by a lock and IRQs that occur + * after the handler is deleted are just NOPs. + */ +} +EXPORT_SYMBOL_GPL(synchronize_irq); + +#ifndef CONFIG_PCI + +/* Only PCI devices have dynamically-defined IRQ handlers */ + +int request_irq(unsigned int irq, irq_handler_t handler, + unsigned long irqflags, const char *devname, void *dev_id) +{ + return -EINVAL; +} +EXPORT_SYMBOL_GPL(request_irq); + +void free_irq(unsigned int irq, void *dev_id) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(free_irq); + +void enable_irq(unsigned int irq) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(enable_irq); + +void disable_irq(unsigned int irq) +{ + WARN_ON(1); +} +EXPORT_SYMBOL_GPL(disable_irq); + +#endif /* !CONFIG_PCI */ + +void disable_irq_nosync(unsigned int irq) +{ + disable_irq(irq); +} +EXPORT_SYMBOL_GPL(disable_irq_nosync); + +unsigned long probe_irq_on(void) +{ + return 0; +} +EXPORT_SYMBOL_GPL(probe_irq_on); + +int probe_irq_off(unsigned long val) +{ + return 0; +} +EXPORT_SYMBOL_GPL(probe_irq_off); + +unsigned int probe_irq_mask(unsigned long val) +{ + return val; +} +EXPORT_SYMBOL_GPL(probe_irq_mask); diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index b6506ee32a36..29bd7bec4176 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -225,7 +225,7 @@ _sclp_print: ahi %r2,1 ltr %r0,%r0 # end of string? jz .LfinalizemtoS4 - chi %r0,0x15 # end of line (NL)? + chi %r0,0x0a # end of line (NL)? jz .LfinalizemtoS4 stc %r0,0(%r6,%r7) # copy to mto la %r11,0(%r6,%r7) diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index e6f15b5d8b7d..f1e5be85d592 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -302,15 +302,6 @@ static int zpci_cfg_store(struct zpci_dev *zdev, int offset, u32 val, u8 len) return rc; } -void synchronize_irq(unsigned int irq) -{ - /* - * Not needed, the handler is protected by a lock and IRQs that occur - * after the handler is deleted are just NOPs. - */ -} -EXPORT_SYMBOL_GPL(synchronize_irq); - void enable_irq(unsigned int irq) { struct msi_desc *msi = irq_get_msi_desc(irq); @@ -327,30 +318,6 @@ void disable_irq(unsigned int irq) } EXPORT_SYMBOL_GPL(disable_irq); -void disable_irq_nosync(unsigned int irq) -{ - disable_irq(irq); -} -EXPORT_SYMBOL_GPL(disable_irq_nosync); - -unsigned long probe_irq_on(void) -{ - return 0; -} -EXPORT_SYMBOL_GPL(probe_irq_on); - -int probe_irq_off(unsigned long val) -{ - return 0; -} -EXPORT_SYMBOL_GPL(probe_irq_off); - -unsigned int probe_irq_mask(unsigned long val) -{ - return val; -} -EXPORT_SYMBOL_GPL(probe_irq_mask); - void pcibios_fixup_bus(struct pci_bus *bus) { } diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 9f20566b0773..79cc0d1a477d 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -54,6 +54,7 @@ EXPORT_SYMBOL(of_set_property_mutex); int of_set_property(struct device_node *dp, const char *name, void *val, int len) { struct property **prevp; + unsigned long flags; void *new_val; int err; @@ -64,7 +65,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len err = -ENODEV; mutex_lock(&of_set_property_mutex); - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); prevp = &dp->properties; while (*prevp) { struct property *prop = *prevp; @@ -91,7 +92,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len } prevp = &(*prevp)->next; } - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); mutex_unlock(&of_set_property_mutex); /* XXX Upate procfs if necessary... */ diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 35ee62fccf98..c205035a6b96 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -251,51 +251,6 @@ static void find_bits(unsigned long mask, u8 *pos, u8 *size) *size = len; } -static efi_status_t setup_efi_vars(struct boot_params *params) -{ - struct setup_data *data; - struct efi_var_bootdata *efidata; - u64 store_size, remaining_size, var_size; - efi_status_t status; - - if (sys_table->runtime->hdr.revision < EFI_2_00_SYSTEM_TABLE_REVISION) - return EFI_UNSUPPORTED; - - data = (struct setup_data *)(unsigned long)params->hdr.setup_data; - - while (data && data->next) - data = (struct setup_data *)(unsigned long)data->next; - - status = efi_call_phys4((void *)sys_table->runtime->query_variable_info, - EFI_VARIABLE_NON_VOLATILE | - EFI_VARIABLE_BOOTSERVICE_ACCESS | - EFI_VARIABLE_RUNTIME_ACCESS, &store_size, - &remaining_size, &var_size); - - if (status != EFI_SUCCESS) - return status; - - status = efi_call_phys3(sys_table->boottime->allocate_pool, - EFI_LOADER_DATA, sizeof(*efidata), &efidata); - - if (status != EFI_SUCCESS) - return status; - - efidata->data.type = SETUP_EFI_VARS; - efidata->data.len = sizeof(struct efi_var_bootdata) - - sizeof(struct setup_data); - efidata->data.next = 0; - efidata->store_size = store_size; - efidata->remaining_size = remaining_size; - efidata->max_var_size = var_size; - - if (data) - data->next = (unsigned long)efidata; - else - params->hdr.setup_data = (unsigned long)efidata; - -} - static efi_status_t setup_efi_pci(struct boot_params *params) { efi_pci_io_protocol *pci; @@ -1202,8 +1157,6 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table, setup_graphics(boot_params); - setup_efi_vars(boot_params); - setup_efi_pci(boot_params); status = efi_call_phys3(sys_table->boottime->allocate_pool, diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 2fb5d5884e23..60c89f30c727 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -102,13 +102,6 @@ extern void efi_call_phys_epilog(void); extern void efi_unmap_memmap(void); extern void efi_memory_uc(u64 addr, unsigned long size); -struct efi_var_bootdata { - struct setup_data data; - u64 store_size; - u64 remaining_size; - u64 max_var_size; -}; - #ifdef CONFIG_EFI static inline bool efi_is_native(void) diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 08744242b8d2..c15ddaf90710 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -6,7 +6,6 @@ #define SETUP_E820_EXT 1 #define SETUP_DTB 2 #define SETUP_PCI 3 -#define SETUP_EFI_VARS 4 /* ram_size flags */ #define RAMDISK_IMAGE_START_MASK 0x07FF diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S index 7a6f3b3be3cf..f2bb9c96720a 100644 --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -160,7 +160,7 @@ identity_mapped: xorq %rbp, %rbp xorq %r8, %r8 xorq %r9, %r9 - xorq %r10, %r9 + xorq %r10, %r10 xorq %r11, %r11 xorq %r12, %r12 xorq %r13, %r13 diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index eaac1743def7..1f34e9219775 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -277,6 +277,9 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range, end_pfn = limit_pfn; nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0); + if (!after_bootmem) + adjust_range_page_size_mask(mr, nr_range); + /* try to merge same page size and continuous */ for (i = 0; nr_range > 1 && i < nr_range - 1; i++) { unsigned long old_start; @@ -291,9 +294,6 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range, nr_range--; } - if (!after_bootmem) - adjust_range_page_size_mask(mr, nr_range); - for (i = 0; i < nr_range; i++) printk(KERN_DEBUG " [mem %#010lx-%#010lx] page %s\n", mr[i].start, mr[i].end - 1, diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 82089d8b1954..5ae2eb09419e 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -42,7 +42,6 @@ #include <linux/io.h> #include <linux/reboot.h> #include <linux/bcd.h> -#include <linux/ucs2_string.h> #include <asm/setup.h> #include <asm/efi.h> @@ -54,12 +53,12 @@ #define EFI_DEBUG 1 -/* - * There's some additional metadata associated with each - * variable. Intel's reference implementation is 60 bytes - bump that - * to account for potential alignment constraints - */ -#define VAR_METADATA_SIZE 64 +#define EFI_MIN_RESERVE 5120 + +#define EFI_DUMMY_GUID \ + EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9) + +static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 }; struct efi __read_mostly efi = { .mps = EFI_INVALID_TABLE_ADDR, @@ -79,13 +78,6 @@ struct efi_memory_map memmap; static struct efi efi_phys __initdata; static efi_system_table_t efi_systab __initdata; -static u64 efi_var_store_size; -static u64 efi_var_remaining_size; -static u64 efi_var_max_var_size; -static u64 boot_used_size; -static u64 boot_var_size; -static u64 active_size; - unsigned long x86_efi_facility; /* @@ -188,53 +180,8 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, efi_char16_t *name, efi_guid_t *vendor) { - efi_status_t status; - static bool finished = false; - static u64 var_size; - - status = efi_call_virt3(get_next_variable, - name_size, name, vendor); - - if (status == EFI_NOT_FOUND) { - finished = true; - if (var_size < boot_used_size) { - boot_var_size = boot_used_size - var_size; - active_size += boot_var_size; - } else { - printk(KERN_WARNING FW_BUG "efi: Inconsistent initial sizes\n"); - } - } - - if (boot_used_size && !finished) { - unsigned long size = 0; - u32 attr; - efi_status_t s; - void *tmp; - - s = virt_efi_get_variable(name, vendor, &attr, &size, NULL); - - if (s != EFI_BUFFER_TOO_SMALL || !size) - return status; - - tmp = kmalloc(size, GFP_ATOMIC); - - if (!tmp) - return status; - - s = virt_efi_get_variable(name, vendor, &attr, &size, tmp); - - if (s == EFI_SUCCESS && (attr & EFI_VARIABLE_NON_VOLATILE)) { - var_size += size; - var_size += ucs2_strsize(name, 1024); - active_size += size; - active_size += VAR_METADATA_SIZE; - active_size += ucs2_strsize(name, 1024); - } - - kfree(tmp); - } - - return status; + return efi_call_virt3(get_next_variable, + name_size, name, vendor); } static efi_status_t virt_efi_set_variable(efi_char16_t *name, @@ -243,34 +190,9 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name, unsigned long data_size, void *data) { - efi_status_t status; - u32 orig_attr = 0; - unsigned long orig_size = 0; - - status = virt_efi_get_variable(name, vendor, &orig_attr, &orig_size, - NULL); - - if (status != EFI_BUFFER_TOO_SMALL) - orig_size = 0; - - status = efi_call_virt5(set_variable, - name, vendor, attr, - data_size, data); - - if (status == EFI_SUCCESS) { - if (orig_size) { - active_size -= orig_size; - active_size -= ucs2_strsize(name, 1024); - active_size -= VAR_METADATA_SIZE; - } - if (data_size) { - active_size += data_size; - active_size += ucs2_strsize(name, 1024); - active_size += VAR_METADATA_SIZE; - } - } - - return status; + return efi_call_virt5(set_variable, + name, vendor, attr, + data_size, data); } static efi_status_t virt_efi_query_variable_info(u32 attr, @@ -786,9 +708,6 @@ void __init efi_init(void) char vendor[100] = "unknown"; int i = 0; void *tmp; - struct setup_data *data; - struct efi_var_bootdata *efi_var_data; - u64 pa_data; #ifdef CONFIG_X86_32 if (boot_params.efi_info.efi_systab_hi || @@ -806,22 +725,6 @@ void __init efi_init(void) if (efi_systab_init(efi_phys.systab)) return; - pa_data = boot_params.hdr.setup_data; - while (pa_data) { - data = early_ioremap(pa_data, sizeof(*efi_var_data)); - if (data->type == SETUP_EFI_VARS) { - efi_var_data = (struct efi_var_bootdata *)data; - - efi_var_store_size = efi_var_data->store_size; - efi_var_remaining_size = efi_var_data->remaining_size; - efi_var_max_var_size = efi_var_data->max_var_size; - } - pa_data = data->next; - early_iounmap(data, sizeof(*efi_var_data)); - } - - boot_used_size = efi_var_store_size - efi_var_remaining_size; - set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility); /* @@ -1085,6 +988,13 @@ void __init efi_enter_virtual_mode(void) runtime_code_page_mkexec(); kfree(new_memmap); + + /* clean DUMMY object */ + efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + 0, NULL); } /* @@ -1136,33 +1046,65 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size) efi_status_t status; u64 storage_size, remaining_size, max_size; + if (!(attributes & EFI_VARIABLE_NON_VOLATILE)) + return 0; + status = efi.query_variable_info(attributes, &storage_size, &remaining_size, &max_size); if (status != EFI_SUCCESS) return status; - if (!max_size && remaining_size > size) - printk_once(KERN_ERR FW_BUG "Broken EFI implementation" - " is returning MaxVariableSize=0\n"); /* * Some firmware implementations refuse to boot if there's insufficient * space in the variable store. We account for that by refusing the * write if permitting it would reduce the available space to under - * 50%. However, some firmware won't reclaim variable space until - * after the used (not merely the actively used) space drops below - * a threshold. We can approximate that case with the value calculated - * above. If both the firmware and our calculations indicate that the - * available space would drop below 50%, refuse the write. + * 5KB. This figure was provided by Samsung, so should be safe. */ + if ((remaining_size - size < EFI_MIN_RESERVE) && + !efi_no_storage_paranoia) { + + /* + * Triggering garbage collection may require that the firmware + * generate a real EFI_OUT_OF_RESOURCES error. We can force + * that by attempting to use more space than is available. + */ + unsigned long dummy_size = remaining_size + 1024; + void *dummy = kmalloc(dummy_size, GFP_ATOMIC); + + status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + dummy_size, dummy); + + if (status == EFI_SUCCESS) { + /* + * This should have failed, so if it didn't make sure + * that we delete it... + */ + efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID, + EFI_VARIABLE_NON_VOLATILE | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS, + 0, dummy); + } - if (!storage_size || size > remaining_size || - (max_size && size > max_size)) - return EFI_OUT_OF_RESOURCES; + /* + * The runtime code may now have triggered a garbage collection + * run, so check the variable info again + */ + status = efi.query_variable_info(attributes, &storage_size, + &remaining_size, &max_size); - if (!efi_no_storage_paranoia && - ((active_size + size + VAR_METADATA_SIZE > storage_size / 2) && - (remaining_size - size < storage_size / 2))) - return EFI_OUT_OF_RESOURCES; + if (status != EFI_SUCCESS) + return status; + + /* + * There still isn't enough room, so return an error + */ + if (remaining_size - size < EFI_MIN_RESERVE) + return EFI_OUT_OF_RESOURCES; + } return EFI_SUCCESS; } diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index 590be1090892..f7bab68a4b83 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -42,9 +42,6 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { "^(xen_irq_disable_direct_reloc$|" "xen_save_fl_direct_reloc$|" "VDSO|" -#if ELF_BITS == 64 - "__vvar_page|" -#endif "__crc_)", /* @@ -72,6 +69,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { "__per_cpu_load|" "init_per_cpu__.*|" "__end_rodata_hpage_align|" + "__vvar_page|" #endif "_end)$" }; diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index fb44426fe931..d99cae8147d1 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/smp.h> #include <linux/irq_work.h> +#include <linux/tick.h> #include <asm/paravirt.h> #include <asm/desc.h> @@ -447,6 +448,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); cpu_bringup(); + /* + * commit 4b0c0f294 (tick: Cleanup NOHZ per cpu data on cpu down) + * clears certain data that the cpu_idle loop (which called us + * and that we return from) expects. The only way to get that + * data back is to call: + */ + tick_nohz_idle_enter(); } #else /* !CONFIG_HOTPLUG_CPU */ diff --git a/block/blk-core.c b/block/blk-core.c index 33c33bc99ddd..d5745b5833c9 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -3164,7 +3164,7 @@ void blk_post_runtime_resume(struct request_queue *q, int err) q->rpm_status = RPM_ACTIVE; __blk_run_queue(q); pm_runtime_mark_last_busy(q->dev); - pm_runtime_autosuspend(q->dev); + pm_request_autosuspend(q->dev); } else { q->rpm_status = RPM_SUSPENDED; } diff --git a/crypto/Kconfig b/crypto/Kconfig index 622d8a48cbe9..bf8148e74e73 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -823,6 +823,7 @@ config CRYPTO_BLOWFISH_X86_64 config CRYPTO_BLOWFISH_AVX2_X86_64 tristate "Blowfish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT + depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 @@ -1299,6 +1300,7 @@ config CRYPTO_TWOFISH_AVX_X86_64 config CRYPTO_TWOFISH_AVX2_X86_64 tristate "Twofish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT + depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 44225cb15f3a..b14ac46948c9 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1017,11 +1017,8 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver) return -ENOSYS; result = driver->ops.add(device); - if (result) { - device->driver = NULL; - device->driver_data = NULL; + if (result) return result; - } device->driver = driver; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5d7075d25700..440eadf2d32c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1722,6 +1722,9 @@ static int acpi_video_bus_add(struct acpi_device *device) int error; acpi_status status; + if (device->handler) + return -EINVAL; + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, device->parent->handle, 1, acpi_video_bus_match, NULL, diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index aa0875f6f1b7..02f490bad30f 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -143,7 +143,7 @@ static int rbtree_show(struct seq_file *s, void *ignored) int registers = 0; int this_registers, average; - map->lock(map); + map->lock(map->lock_arg); mem_size = sizeof(*rbtree_ctx); mem_size += BITS_TO_LONGS(map->cache_present_nbits) * sizeof(long); @@ -170,7 +170,7 @@ static int rbtree_show(struct seq_file *s, void *ignored) seq_printf(s, "%d nodes, %d registers, average %d registers, used %zu bytes\n", nodes, registers, average, mem_size); - map->unlock(map); + map->unlock(map->lock_arg); return 0; } @@ -391,8 +391,6 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, for (node = rb_first(&rbtree_ctx->root); node; node = rb_next(node)) { rbnode = rb_entry(node, struct regcache_rbtree_node, node); - if (rbnode->base_reg < min) - continue; if (rbnode->base_reg > max) break; if (rbnode->base_reg + rbnode->blklen < min) diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 75923f2396bd..507ee2da0f6e 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -270,7 +270,7 @@ int regcache_sync(struct regmap *map) BUG_ON(!map->cache_ops || !map->cache_ops->sync); - map->lock(map); + map->lock(map->lock_arg); /* Remember the initial bypass state */ bypass = map->cache_bypass; dev_dbg(map->dev, "Syncing %s cache\n", @@ -306,7 +306,7 @@ out: trace_regcache_sync(map->dev, name, "stop"); /* Restore the bypass state */ map->cache_bypass = bypass; - map->unlock(map); + map->unlock(map->lock_arg); return ret; } @@ -333,7 +333,7 @@ int regcache_sync_region(struct regmap *map, unsigned int min, BUG_ON(!map->cache_ops || !map->cache_ops->sync); - map->lock(map); + map->lock(map->lock_arg); /* Remember the initial bypass state */ bypass = map->cache_bypass; @@ -352,7 +352,7 @@ out: trace_regcache_sync(map->dev, name, "stop region"); /* Restore the bypass state */ map->cache_bypass = bypass; - map->unlock(map); + map->unlock(map->lock_arg); return ret; } @@ -372,11 +372,11 @@ EXPORT_SYMBOL_GPL(regcache_sync_region); */ void regcache_cache_only(struct regmap *map, bool enable) { - map->lock(map); + map->lock(map->lock_arg); WARN_ON(map->cache_bypass && enable); map->cache_only = enable; trace_regmap_cache_only(map->dev, enable); - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_cache_only); @@ -391,9 +391,9 @@ EXPORT_SYMBOL_GPL(regcache_cache_only); */ void regcache_mark_dirty(struct regmap *map) { - map->lock(map); + map->lock(map->lock_arg); map->cache_dirty = true; - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_mark_dirty); @@ -410,11 +410,11 @@ EXPORT_SYMBOL_GPL(regcache_mark_dirty); */ void regcache_cache_bypass(struct regmap *map, bool enable) { - map->lock(map); + map->lock(map->lock_arg); WARN_ON(map->cache_only && enable); map->cache_bypass = enable; trace_regmap_cache_bypass(map->dev, enable); - map->unlock(map); + map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_cache_bypass); diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 23b701f5fd2f..975719bc3450 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -265,6 +265,7 @@ static ssize_t regmap_map_write_file(struct file *file, char *start = buf; unsigned long reg, value; struct regmap *map = file->private_data; + int ret; buf_size = min(count, (sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) @@ -282,7 +283,9 @@ static ssize_t regmap_map_write_file(struct file *file, /* Userspace has been fiddling around behind the kernel's back */ add_taint(TAINT_USER, LOCKDEP_NOW_UNRELIABLE); - regmap_write(map, reg, value); + ret = regmap_write(map, reg, value); + if (ret < 0) + return ret; return buf_size; } #else diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6374dc103521..62b6c2cc80b5 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -168,8 +168,6 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id); static int cciss_open(struct block_device *bdev, fmode_t mode); static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode); static void cciss_release(struct gendisk *disk, fmode_t mode); -static int do_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg); static int cciss_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); @@ -235,7 +233,7 @@ static const struct block_device_operations cciss_fops = { .owner = THIS_MODULE, .open = cciss_unlocked_open, .release = cciss_release, - .ioctl = do_ioctl, + .ioctl = cciss_ioctl, .getgeo = cciss_getgeo, #ifdef CONFIG_COMPAT .compat_ioctl = cciss_compat_ioctl, @@ -1143,16 +1141,6 @@ static void cciss_release(struct gendisk *disk, fmode_t mode) mutex_unlock(&cciss_mutex); } -static int do_ioctl(struct block_device *bdev, fmode_t mode, - unsigned cmd, unsigned long arg) -{ - int ret; - mutex_lock(&cciss_mutex); - ret = cciss_ioctl(bdev, mode, cmd, arg); - mutex_unlock(&cciss_mutex); - return ret; -} - #ifdef CONFIG_COMPAT static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, @@ -1179,7 +1167,7 @@ static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode, case CCISS_REGNEWD: case CCISS_RESCANDISK: case CCISS_GETLUNINFO: - return do_ioctl(bdev, mode, cmd, arg); + return cciss_ioctl(bdev, mode, cmd, arg); case CCISS_PASSTHRU32: return cciss_ioctl32_passthru(bdev, mode, cmd, arg); @@ -1219,7 +1207,7 @@ static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, if (err) return -EFAULT; - err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -1261,7 +1249,7 @@ static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, if (err) return -EFAULT; - err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -1311,11 +1299,14 @@ static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp) static int cciss_getintinfo(ctlr_info_t *h, void __user *argp) { cciss_coalint_struct intinfo; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay); intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user (argp, &intinfo, sizeof(cciss_coalint_struct))) return -EFAULT; @@ -1356,12 +1347,15 @@ static int cciss_setintinfo(ctlr_info_t *h, void __user *argp) static int cciss_getnodename(ctlr_info_t *h, void __user *argp) { NodeName_type NodeName; + unsigned long flags; int i; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); for (i = 0; i < 16; i++) NodeName[i] = readb(&h->cfgtable->ServerName[i]); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) return -EFAULT; return 0; @@ -1398,10 +1392,13 @@ static int cciss_setnodename(ctlr_info_t *h, void __user *argp) static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) { Heartbeat_type heartbeat; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); heartbeat = readl(&h->cfgtable->HeartBeat); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type))) return -EFAULT; return 0; @@ -1410,10 +1407,13 @@ static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) static int cciss_getbustypes(ctlr_info_t *h, void __user *argp) { BusTypes_type BusTypes; + unsigned long flags; if (!argp) return -EINVAL; + spin_lock_irqsave(&h->lock, flags); BusTypes = readl(&h->cfgtable->BusTypes); + spin_unlock_irqrestore(&h->lock, flags); if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type))) return -EFAULT; return 0; diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 847107ef0cce..20dd52a2f92f 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3002,7 +3002,8 @@ static int mtip_hw_debugfs_init(struct driver_data *dd) static void mtip_hw_debugfs_exit(struct driver_data *dd) { - debugfs_remove_recursive(dd->dfs_node); + if (dd->dfs_node) + debugfs_remove_recursive(dd->dfs_node); } @@ -3863,7 +3864,7 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) struct driver_data *dd = queue->queuedata; struct scatterlist *sg; struct bio_vec *bvec; - int nents = 0; + int i, nents = 0; int tag = 0, unaligned = 0; if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) { @@ -3921,11 +3922,12 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) } /* Create the scatter list for this bio. */ - bio_for_each_segment(bvec, bio, nents) { + bio_for_each_segment(bvec, bio, i) { sg_set_page(&sg[nents], bvec->bv_page, bvec->bv_len, bvec->bv_offset); + nents++; } /* Issue the read/write. */ diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index 8efdfaa44a59..ce79a590b45b 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -629,7 +629,7 @@ static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns, struct nvme_command *cmnd; struct nvme_iod *iod; enum dma_data_direction dma_dir; - int cmdid, length, result = -ENOMEM; + int cmdid, length, result; u16 control; u32 dsmgmt; int psegs = bio_phys_segments(ns->queue, bio); @@ -640,6 +640,7 @@ static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns, return result; } + result = -ENOMEM; iod = nvme_alloc_iod(psegs, bio->bi_size, GFP_ATOMIC); if (!iod) goto nomem; @@ -977,6 +978,8 @@ static void nvme_cancel_ios(struct nvme_queue *nvmeq, bool timeout) if (timeout && !time_after(now, info[cmdid].timeout)) continue; + if (info[cmdid].ctx == CMD_CTX_CANCELLED) + continue; dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid); ctx = cancel_cmdid(nvmeq, cmdid, &fn); fn(nvmeq->dev, ctx, &cqe); @@ -1206,7 +1209,7 @@ struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, if (addr & 3) return ERR_PTR(-EINVAL); - if (!length) + if (!length || length > INT_MAX - PAGE_SIZE) return ERR_PTR(-EINVAL); offset = offset_in_page(addr); @@ -1227,7 +1230,8 @@ struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, sg_init_table(sg, count); for (i = 0; i < count; i++) { sg_set_page(&sg[i], pages[i], - min_t(int, length, PAGE_SIZE - offset), offset); + min_t(unsigned, length, PAGE_SIZE - offset), + offset); length -= (PAGE_SIZE - offset); offset = 0; } @@ -1435,7 +1439,7 @@ static int nvme_user_admin_cmd(struct nvme_dev *dev, nvme_free_iod(dev, iod); } - if (!status && copy_to_user(&ucmd->result, &cmd.result, + if ((status >= 0) && copy_to_user(&ucmd->result, &cmd.result, sizeof(cmd.result))) status = -EFAULT; @@ -1633,7 +1637,8 @@ static int set_queue_count(struct nvme_dev *dev, int count) static int nvme_setup_io_queues(struct nvme_dev *dev) { - int result, cpu, i, nr_io_queues, db_bar_size, q_depth; + struct pci_dev *pdev = dev->pci_dev; + int result, cpu, i, nr_io_queues, db_bar_size, q_depth, q_count; nr_io_queues = num_online_cpus(); result = set_queue_count(dev, nr_io_queues); @@ -1642,14 +1647,14 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) if (result < nr_io_queues) nr_io_queues = result; + q_count = nr_io_queues; /* Deregister the admin queue's interrupt */ free_irq(dev->entry[0].vector, dev->queues[0]); db_bar_size = 4096 + ((nr_io_queues + 1) << (dev->db_stride + 3)); if (db_bar_size > 8192) { iounmap(dev->bar); - dev->bar = ioremap(pci_resource_start(dev->pci_dev, 0), - db_bar_size); + dev->bar = ioremap(pci_resource_start(pdev, 0), db_bar_size); dev->dbs = ((void __iomem *)dev->bar) + 4096; dev->queues[0]->q_db = dev->dbs; } @@ -1657,19 +1662,36 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) for (i = 0; i < nr_io_queues; i++) dev->entry[i].entry = i; for (;;) { - result = pci_enable_msix(dev->pci_dev, dev->entry, - nr_io_queues); + result = pci_enable_msix(pdev, dev->entry, nr_io_queues); if (result == 0) { break; } else if (result > 0) { nr_io_queues = result; continue; } else { - nr_io_queues = 1; + nr_io_queues = 0; break; } } + if (nr_io_queues == 0) { + nr_io_queues = q_count; + for (;;) { + result = pci_enable_msi_block(pdev, nr_io_queues); + if (result == 0) { + for (i = 0; i < nr_io_queues; i++) + dev->entry[i].vector = i + pdev->irq; + break; + } else if (result > 0) { + nr_io_queues = result; + continue; + } else { + nr_io_queues = 1; + break; + } + } + } + result = queue_request_irq(dev, dev->queues[0], "nvme admin"); /* XXX: handle failure here */ @@ -1850,7 +1872,10 @@ static void nvme_free_dev(struct kref *kref) { struct nvme_dev *dev = container_of(kref, struct nvme_dev, kref); nvme_dev_remove(dev); - pci_disable_msix(dev->pci_dev); + if (dev->pci_dev->msi_enabled) + pci_disable_msi(dev->pci_dev); + else if (dev->pci_dev->msix_enabled) + pci_disable_msix(dev->pci_dev); iounmap(dev->bar); nvme_release_instance(dev); nvme_release_prp_pools(dev); @@ -1923,8 +1948,14 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&dev->namespaces); dev->pci_dev = pdev; pci_set_drvdata(pdev, dev); - dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + else + goto disable; + result = nvme_set_instance(dev); if (result) goto disable; @@ -1977,7 +2008,10 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) unmap: iounmap(dev->bar); disable_msix: - pci_disable_msix(pdev); + if (dev->pci_dev->msi_enabled) + pci_disable_msi(dev->pci_dev); + else if (dev->pci_dev->msix_enabled) + pci_disable_msix(dev->pci_dev); nvme_release_instance(dev); nvme_release_prp_pools(dev); disable: diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index fed54b039893..102de2f52b5c 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -44,7 +44,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/types.h> -#include <linux/version.h> #include <scsi/sg.h> #include <scsi/scsi.h> @@ -1654,7 +1653,7 @@ static void nvme_trans_modesel_save_bd(struct nvme_ns *ns, u8 *parm_list, } } -static u16 nvme_trans_modesel_get_mp(struct nvme_ns *ns, struct sg_io_hdr *hdr, +static int nvme_trans_modesel_get_mp(struct nvme_ns *ns, struct sg_io_hdr *hdr, u8 *mode_page, u8 page_code) { int res = SNTI_TRANSLATION_SUCCESS; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 3c08983e600a..f5d0ea11d9fd 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -83,7 +83,8 @@ #define MAX_SPEED 0xffff -#define ZONE(sector, pd) (((sector) + (pd)->offset) & ~((pd)->settings.size - 1)) +#define ZONE(sector, pd) (((sector) + (pd)->offset) & \ + ~(sector_t)((pd)->settings.size - 1)) static DEFINE_MUTEX(pktcdvd_mutex); static struct pktcdvd_device *pkt_devs[MAX_WRITERS]; diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index d6d314027b5d..3063452e55da 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -519,8 +519,8 @@ static const struct block_device_operations rbd_bd_ops = { }; /* - * Initialize an rbd client instance. - * We own *ceph_opts. + * Initialize an rbd client instance. Success or not, this function + * consumes ceph_opts. */ static struct rbd_client *rbd_client_create(struct ceph_options *ceph_opts) { @@ -675,7 +675,8 @@ static int parse_rbd_opts_token(char *c, void *private) /* * Get a ceph client with specific addr and configuration, if one does - * not exist create it. + * not exist create it. Either way, ceph_opts is consumed by this + * function. */ static struct rbd_client *rbd_get_client(struct ceph_options *ceph_opts) { @@ -4697,8 +4698,10 @@ out: return ret; } -/* Undo whatever state changes are made by v1 or v2 image probe */ - +/* + * Undo whatever state changes are made by v1 or v2 header info + * call. + */ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; @@ -4902,9 +4905,10 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping) int tmp; /* - * Get the id from the image id object. If it's not a - * format 2 image, we'll get ENOENT back, and we'll assume - * it's a format 1 image. + * Get the id from the image id object. Unless there's an + * error, rbd_dev->spec->image_id will be filled in with + * a dynamically-allocated string, and rbd_dev->image_format + * will be set to either 1 or 2. */ ret = rbd_dev_image_id(rbd_dev); if (ret) @@ -4992,7 +4996,6 @@ static ssize_t rbd_add(struct bus_type *bus, rc = PTR_ERR(rbdc); goto err_out_args; } - ceph_opts = NULL; /* rbd_dev client now owns this */ /* pick the pool */ osdc = &rbdc->client->osdc; @@ -5027,18 +5030,18 @@ static ssize_t rbd_add(struct bus_type *bus, rbd_dev->mapping.read_only = read_only; rc = rbd_dev_device_setup(rbd_dev); - if (!rc) - return count; + if (rc) { + rbd_dev_image_release(rbd_dev); + goto err_out_module; + } + + return count; - rbd_dev_image_release(rbd_dev); err_out_rbd_dev: rbd_dev_destroy(rbd_dev); err_out_client: rbd_put_client(rbdc); err_out_args: - if (ceph_opts) - ceph_destroy_options(ceph_opts); - kfree(rbd_opts); rbd_spec_put(spec); err_out_module: module_put(THIS_MODULE); diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index fdfd61a2d523..11a6104a1e4f 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -201,7 +201,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787/8797. + Marvell Bluetooth devices, such as 8688/8787/8797/8897. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -214,7 +214,7 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787/SD8797 + devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897 chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index c63488c54f4a..13693b7a0d5c 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .io_port_2 = 0x7a, }; +static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = { + .cfg = 0x00, + .host_int_mask = 0x02, + .host_intstatus = 0x03, + .card_status = 0x50, + .sq_read_base_addr_a0 = 0x60, + .sq_read_base_addr_a1 = 0x61, + .card_revision = 0xbc, + .card_fw_status0 = 0xc0, + .card_fw_status1 = 0xc1, + .card_rx_len = 0xc2, + .card_rx_unit = 0xc3, + .io_port_0 = 0xd8, + .io_port_1 = 0xd9, + .io_port_2 = 0xda, +}; + static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { .helper = "mrvl/sd8688_helper.bin", .firmware = "mrvl/sd8688.bin", @@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { .sd_blksz_fw_dl = 256, }; +static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { + .helper = NULL, + .firmware = "mrvl/sd8897_uapsta.bin", + .reg = &btmrvl_reg_88xx, + .sd_blksz_fw_dl = 256, +}; + static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8688 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105), @@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8797 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, + /* Marvell SD8897 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E), + .driver_data = (unsigned long) &btmrvl_sdio_sd8897 }, { } /* Terminating entry */ }; @@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin"); MODULE_FIRMWARE("mrvl/sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index b05ecab915c4..46cd5bb098a9 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -4,6 +4,15 @@ menu "Bus devices" +config IMX_WEIM + bool "Freescale EIM DRIVER" + depends on ARCH_MXC + help + Driver for i.MX6 WEIM controller. + The WEIM(Wireless External Interface Module) works like a bus. + You can attach many different devices on it, such as NOR, onenand. + But now, we only support the Parallel NOR. + config MVEBU_MBUS bool depends on PLAT_ORION diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 3c7b53c12091..436bbccf4894 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -2,6 +2,7 @@ # Makefile for the bus drivers. # +obj-$(CONFIG_IMX_WEIM) += imx-weim.o obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c new file mode 100644 index 000000000000..349f14e886b7 --- /dev/null +++ b/drivers/bus/imx-weim.c @@ -0,0 +1,138 @@ +/* + * EIM driver for Freescale's i.MX chips + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/of_device.h> + +struct imx_weim { + void __iomem *base; + struct clk *clk; +}; + +static const struct of_device_id weim_id_table[] = { + { .compatible = "fsl,imx6q-weim", }, + {} +}; +MODULE_DEVICE_TABLE(of, weim_id_table); + +#define CS_TIMING_LEN 6 +#define CS_REG_RANGE 0x18 + +/* Parse and set the timing for this device. */ +static int +weim_timing_setup(struct platform_device *pdev, struct device_node *np) +{ + struct imx_weim *weim = platform_get_drvdata(pdev); + u32 value[CS_TIMING_LEN]; + u32 cs_idx; + int ret; + int i; + + /* get the CS index from this child node's "reg" property. */ + ret = of_property_read_u32(np, "reg", &cs_idx); + if (ret) + return ret; + + /* The weim has four chip selects. */ + if (cs_idx > 3) + return -EINVAL; + + ret = of_property_read_u32_array(np, "fsl,weim-cs-timing", + value, CS_TIMING_LEN); + if (ret) + return ret; + + /* set the timing for WEIM */ + for (i = 0; i < CS_TIMING_LEN; i++) + writel(value[i], weim->base + cs_idx * CS_REG_RANGE + i * 4); + return 0; +} + +static int weim_parse_dt(struct platform_device *pdev) +{ + struct device_node *child; + int ret; + + for_each_child_of_node(pdev->dev.of_node, child) { + if (!child->name) + continue; + + ret = weim_timing_setup(pdev, child); + if (ret) { + dev_err(&pdev->dev, "%s set timing failed.\n", + child->full_name); + return ret; + } + } + + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + if (ret) + dev_err(&pdev->dev, "%s fail to create devices.\n", + pdev->dev.of_node->full_name); + return ret; +} + +static int weim_probe(struct platform_device *pdev) +{ + struct imx_weim *weim; + struct resource *res; + int ret = -EINVAL; + + weim = devm_kzalloc(&pdev->dev, sizeof(*weim), GFP_KERNEL); + if (!weim) { + ret = -ENOMEM; + goto weim_err; + } + platform_set_drvdata(pdev, weim); + + /* get the resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + weim->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(weim->base)) { + ret = PTR_ERR(weim->base); + goto weim_err; + } + + /* get the clock */ + weim->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(weim->clk)) + goto weim_err; + + ret = clk_prepare_enable(weim->clk); + if (ret) + goto weim_err; + + /* parse the device node */ + ret = weim_parse_dt(pdev); + if (ret) { + clk_disable_unprepare(weim->clk); + goto weim_err; + } + + dev_info(&pdev->dev, "WEIM driver registered.\n"); + return 0; + +weim_err: + return ret; +} + +static struct platform_driver weim_driver = { + .driver = { + .name = "imx-weim", + .of_match_table = weim_id_table, + }, + .probe = weim_probe, +}; + +module_platform_driver(weim_driver); +MODULE_AUTHOR("Freescale Semiconductor Inc."); +MODULE_DESCRIPTION("i.MX EIM Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 137d3e730f86..fa435bcf9f1a 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o -obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o +obj-$(CONFIG_ARCH_ZYNQ) += zynq/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 6b4c70f7d23d..6d819a37f647 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -1,48 +1,566 @@ +/* + * Nomadik clock implementation + * Copyright (C) 2013 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <linus.walleij@linaro.org> + */ + +#define pr_fmt(fmt) "Nomadik SRC clocks: " fmt + +#include <linux/bitops.h> #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/err.h> #include <linux/io.h> #include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/reboot.h> /* * The Nomadik clock tree is described in the STN8815A12 DB V4.2 * reference manual for the chip, page 94 ff. + * Clock IDs are in the STn8815 Reference Manual table 3, page 27. */ -void __init nomadik_clk_init(void) +#define SRC_CR 0x00U +#define SRC_XTALCR 0x0CU +#define SRC_XTALCR_XTALTIMEN BIT(20) +#define SRC_XTALCR_SXTALDIS BIT(19) +#define SRC_XTALCR_MXTALSTAT BIT(2) +#define SRC_XTALCR_MXTALEN BIT(1) +#define SRC_XTALCR_MXTALOVER BIT(0) +#define SRC_PLLCR 0x10U +#define SRC_PLLCR_PLLTIMEN BIT(29) +#define SRC_PLLCR_PLL2EN BIT(28) +#define SRC_PLLCR_PLL1STAT BIT(2) +#define SRC_PLLCR_PLL1EN BIT(1) +#define SRC_PLLCR_PLL1OVER BIT(0) +#define SRC_PLLFR 0x14U +#define SRC_PCKEN0 0x24U +#define SRC_PCKDIS0 0x28U +#define SRC_PCKENSR0 0x2CU +#define SRC_PCKSR0 0x30U +#define SRC_PCKEN1 0x34U +#define SRC_PCKDIS1 0x38U +#define SRC_PCKENSR1 0x3CU +#define SRC_PCKSR1 0x40U + +/* Lock protecting the SRC_CR register */ +static DEFINE_SPINLOCK(src_lock); +/* Base address of the SRC */ +static void __iomem *src_base; + +/** + * struct clk_pll1 - Nomadik PLL1 clock + * @hw: corresponding clock hardware entry + * @id: PLL instance: 1 or 2 + */ +struct clk_pll { + struct clk_hw hw; + int id; +}; + +/** + * struct clk_src - Nomadik src clock + * @hw: corresponding clock hardware entry + * @id: the clock ID + * @group1: true if the clock is in group1, else it is in group0 + * @clkbit: bit 0...31 corresponding to the clock in each clock register + */ +struct clk_src { + struct clk_hw hw; + int id; + bool group1; + u32 clkbit; +}; + +#define to_pll(_hw) container_of(_hw, struct clk_pll, hw) +#define to_src(_hw) container_of(_hw, struct clk_src, hw) + +static int pll_clk_enable(struct clk_hw *hw) +{ + struct clk_pll *pll = to_pll(hw); + u32 val; + + spin_lock(&src_lock); + val = readl(src_base + SRC_PLLCR); + if (pll->id == 1) { + if (val & SRC_PLLCR_PLL1OVER) { + val |= SRC_PLLCR_PLL1EN; + writel(val, src_base + SRC_PLLCR); + } + } else if (pll->id == 2) { + val |= SRC_PLLCR_PLL2EN; + writel(val, src_base + SRC_PLLCR); + } + spin_unlock(&src_lock); + return 0; +} + +static void pll_clk_disable(struct clk_hw *hw) +{ + struct clk_pll *pll = to_pll(hw); + u32 val; + + spin_lock(&src_lock); + val = readl(src_base + SRC_PLLCR); + if (pll->id == 1) { + if (val & SRC_PLLCR_PLL1OVER) { + val &= ~SRC_PLLCR_PLL1EN; + writel(val, src_base + SRC_PLLCR); + } + } else if (pll->id == 2) { + val &= ~SRC_PLLCR_PLL2EN; + writel(val, src_base + SRC_PLLCR); + } + spin_unlock(&src_lock); +} + +static int pll_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_pll *pll = to_pll(hw); + u32 val; + + val = readl(src_base + SRC_PLLCR); + if (pll->id == 1) { + if (val & SRC_PLLCR_PLL1OVER) + return !!(val & SRC_PLLCR_PLL1EN); + } else if (pll->id == 2) { + return !!(val & SRC_PLLCR_PLL2EN); + } + return 1; +} + +static unsigned long pll_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_pll(hw); + u32 val; + + val = readl(src_base + SRC_PLLFR); + + if (pll->id == 1) { + u8 mul; + u8 div; + + mul = (val >> 8) & 0x3FU; + mul += 2; + div = val & 0x07U; + return (parent_rate * mul) >> div; + } + + if (pll->id == 2) { + u8 mul; + + mul = (val >> 24) & 0x3FU; + mul += 2; + return (parent_rate * mul); + } + + /* Unknown PLL */ + return 0; +} + + +static const struct clk_ops pll_clk_ops = { + .enable = pll_clk_enable, + .disable = pll_clk_disable, + .is_enabled = pll_clk_is_enabled, + .recalc_rate = pll_clk_recalc_rate, +}; + +static struct clk * __init +pll_clk_register(struct device *dev, const char *name, + const char *parent_name, u32 id) { struct clk *clk; + struct clk_pll *pll; + struct clk_init_data init; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk_register_clkdev(clk, NULL, "gpio.0"); - clk_register_clkdev(clk, NULL, "gpio.1"); - clk_register_clkdev(clk, NULL, "gpio.2"); - clk_register_clkdev(clk, NULL, "gpio.3"); - clk_register_clkdev(clk, NULL, "rng"); - clk_register_clkdev(clk, NULL, "fsmc-nand"); + if (id != 1 && id != 2) { + pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__); + return ERR_PTR(-EINVAL); + } - /* - * The 2.4 MHz TIMCLK reference clock is active at boot time, this is - * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used - * by the timers and watchdog. See page 105 ff. - */ - clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT, - 2400000); - clk_register_clkdev(clk, NULL, "mtu0"); - clk_register_clkdev(clk, NULL, "mtu1"); + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate PLL clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &pll_clk_ops; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + pll->hw.init = &init; + pll->id = id; + + pr_debug("register PLL1 clock \"%s\"\n", name); + + clk = clk_register(dev, &pll->hw); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +/* + * The Nomadik SRC clocks are gated, but not in the sense that + * you read-modify-write a register. Instead there are separate + * clock enable and clock disable registers. Writing a '1' bit in + * the enable register for a certain clock ungates that clock without + * affecting the other clocks. The disable register works the opposite + * way. + */ + +static int src_clk_enable(struct clk_hw *hw) +{ + struct clk_src *sclk = to_src(hw); + u32 enreg = sclk->group1 ? SRC_PCKEN1 : SRC_PCKEN0; + u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; + + writel(sclk->clkbit, src_base + enreg); + /* spin until enabled */ + while (!(readl(src_base + sreg) & sclk->clkbit)) + cpu_relax(); + return 0; +} + +static void src_clk_disable(struct clk_hw *hw) +{ + struct clk_src *sclk = to_src(hw); + u32 disreg = sclk->group1 ? SRC_PCKDIS1 : SRC_PCKDIS0; + u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; + + writel(sclk->clkbit, src_base + disreg); + /* spin until disabled */ + while (readl(src_base + sreg) & sclk->clkbit) + cpu_relax(); +} + +static int src_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_src *sclk = to_src(hw); + u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; + u32 val = readl(src_base + sreg); + return !!(val & sclk->clkbit); +} + +static unsigned long +src_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return parent_rate; +} + +static const struct clk_ops src_clk_ops = { + .enable = src_clk_enable, + .disable = src_clk_disable, + .is_enabled = src_clk_is_enabled, + .recalc_rate = src_clk_recalc_rate, +}; + +static struct clk * __init +src_clk_register(struct device *dev, const char *name, + const char *parent_name, u8 id) +{ + struct clk *clk; + struct clk_src *sclk; + struct clk_init_data init; + + sclk = kzalloc(sizeof(*sclk), GFP_KERNEL); + if (!sclk) { + pr_err("could not allocate SRC clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = name; + init.ops = &src_clk_ops; + /* Do not force-disable the static SDRAM controller */ + if (id == 2) + init.flags = CLK_IGNORE_UNUSED; + else + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + sclk->hw.init = &init; + sclk->id = id; + sclk->group1 = (id > 31); + sclk->clkbit = BIT(id & 0x1f); + + pr_debug("register clock \"%s\" ID: %d group: %d bits: %08x\n", + name, id, sclk->group1, sclk->clkbit); + + clk = clk_register(dev, &sclk->hw); + if (IS_ERR(clk)) + kfree(sclk); + + return clk; +} + +#ifdef CONFIG_DEBUG_FS + +static u32 src_pcksr0_boot; +static u32 src_pcksr1_boot; + +static const char * const src_clk_names[] = { + "HCLKDMA0 ", + "HCLKSMC ", + "HCLKSDRAM ", + "HCLKDMA1 ", + "HCLKCLCD ", + "PCLKIRDA ", + "PCLKSSP ", + "PCLKUART0 ", + "PCLKSDI ", + "PCLKI2C0 ", + "PCLKI2C1 ", + "PCLKUART1 ", + "PCLMSP0 ", + "HCLKUSB ", + "HCLKDIF ", + "HCLKSAA ", + "HCLKSVA ", + "PCLKHSI ", + "PCLKXTI ", + "PCLKUART2 ", + "PCLKMSP1 ", + "PCLKMSP2 ", + "PCLKOWM ", + "HCLKHPI ", + "PCLKSKE ", + "PCLKHSEM ", + "HCLK3D ", + "HCLKHASH ", + "HCLKCRYP ", + "PCLKMSHC ", + "HCLKUSBM ", + "HCLKRNG ", + "RESERVED ", + "RESERVED ", + "RESERVED ", + "RESERVED ", + "CLDCLK ", + "IRDACLK ", + "SSPICLK ", + "UART0CLK ", + "SDICLK ", + "I2C0CLK ", + "I2C1CLK ", + "UART1CLK ", + "MSPCLK0 ", + "USBCLK ", + "DIFCLK ", + "IPI2CCLK ", + "IPBMCCLK ", + "HSICLKRX ", + "HSICLKTX ", + "UART2CLK ", + "MSPCLK1 ", + "MSPCLK2 ", + "OWMCLK ", + "RESERVED ", + "SKECLK ", + "RESERVED ", + "3DCLK ", + "PCLKMSP3 ", + "MSPCLK3 ", + "MSHCCLK ", + "USBMCLK ", + "RNGCCLK ", +}; + +static int nomadik_src_clk_show(struct seq_file *s, void *what) +{ + int i; + u32 src_pcksr0 = readl(src_base + SRC_PCKSR0); + u32 src_pcksr1 = readl(src_base + SRC_PCKSR1); + u32 src_pckensr0 = readl(src_base + SRC_PCKENSR0); + u32 src_pckensr1 = readl(src_base + SRC_PCKENSR1); + + seq_printf(s, "Clock: Boot: Now: Request: ASKED:\n"); + for (i = 0; i < ARRAY_SIZE(src_clk_names); i++) { + u32 pcksrb = (i < 0x20) ? src_pcksr0_boot : src_pcksr1_boot; + u32 pcksr = (i < 0x20) ? src_pcksr0 : src_pcksr1; + u32 pckreq = (i < 0x20) ? src_pckensr0 : src_pckensr1; + u32 mask = BIT(i & 0x1f); + + seq_printf(s, "%s %s %s %s\n", + src_clk_names[i], + (pcksrb & mask) ? "on " : "off", + (pcksr & mask) ? "on " : "off", + (pckreq & mask) ? "on " : "off"); + } + return 0; +} + +static int nomadik_src_clk_open(struct inode *inode, struct file *file) +{ + return single_open(file, nomadik_src_clk_show, NULL); +} + +static const struct file_operations nomadik_src_clk_debugfs_ops = { + .open = nomadik_src_clk_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init nomadik_src_clk_init_debugfs(void) +{ + src_pcksr0_boot = readl(src_base + SRC_PCKSR0); + src_pcksr1_boot = readl(src_base + SRC_PCKSR1); + debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO, + NULL, NULL, &nomadik_src_clk_debugfs_ops); + return 0; +} + +module_init(nomadik_src_clk_init_debugfs); + +#endif + +static void __init of_nomadik_pll_setup(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + u32 pll_id; + + if (of_property_read_u32(np, "pll-id", &pll_id)) { + pr_err("%s: PLL \"%s\" missing pll-id property\n", + __func__, clk_name); + return; + } + parent_name = of_clk_get_parent_name(np, 0); + clk = pll_clk_register(NULL, clk_name, parent_name, pll_id); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static void __init of_nomadik_hclk_setup(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + + parent_name = of_clk_get_parent_name(np, 0); /* - * At boot time, PLL2 is set to generate a set of fixed clocks, - * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD - * I2C, IrDA, USB and SSP blocks. + * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4. */ - clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT, - 48000000); - clk_register_clkdev(clk, NULL, "uart0"); - clk_register_clkdev(clk, NULL, "uart1"); - clk_register_clkdev(clk, NULL, "mmci"); - clk_register_clkdev(clk, NULL, "ssp"); - clk_register_clkdev(clk, NULL, "nmk-i2c.0"); - clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_register_divider(NULL, clk_name, parent_name, + 0, src_base + SRC_CR, + 13, 2, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &src_lock); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static void __init of_nomadik_src_clk_setup(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + u32 clk_id; + + if (of_property_read_u32(np, "clock-id", &clk_id)) { + pr_err("%s: SRC clock \"%s\" missing clock-id property\n", + __func__, clk_name); + return; + } + parent_name = of_clk_get_parent_name(np, 0); + clk = src_clk_register(NULL, clk_name, parent_name, clk_id); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static const __initconst struct of_device_id nomadik_src_match[] = { + { .compatible = "stericsson,nomadik-src" }, + { /* sentinel */ } +}; + +static const __initconst struct of_device_id nomadik_src_clk_match[] = { + { + .compatible = "fixed-clock", + .data = of_fixed_clk_setup, + }, + { + .compatible = "fixed-factor-clock", + .data = of_fixed_factor_clk_setup, + }, + { + .compatible = "st,nomadik-pll-clock", + .data = of_nomadik_pll_setup, + }, + { + .compatible = "st,nomadik-hclk-clock", + .data = of_nomadik_hclk_setup, + }, + { + .compatible = "st,nomadik-src-clock", + .data = of_nomadik_src_clk_setup, + }, + { /* sentinel */ } +}; + +static int nomadik_clk_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + u32 val; + + /* The main chrystal need to be enabled for reboot to work */ + val = readl(src_base + SRC_XTALCR); + val &= ~SRC_XTALCR_MXTALOVER; + val |= SRC_XTALCR_MXTALEN; + pr_crit("force-enabling MXTALO\n"); + writel(val, src_base + SRC_XTALCR); + return NOTIFY_OK; +} + +static struct notifier_block nomadik_clk_reboot_notifier = { + .notifier_call = nomadik_clk_reboot_handler, +}; + +void __init nomadik_clk_init(void) +{ + struct device_node *np; + u32 val; + + np = of_find_matching_node(NULL, nomadik_src_match); + if (!np) { + pr_crit("no matching node for SRC, aborting clock init\n"); + return; + } + src_base = of_iomap(np, 0); + if (!src_base) { + pr_err("%s: must have src parent node with REGS (%s)\n", + __func__, np->name); + return; + } + val = readl(src_base + SRC_XTALCR); + pr_info("SXTALO is %s\n", + (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); + pr_info("MXTAL is %s\n", + (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); + if (of_property_read_bool(np, "disable-sxtalo")) { + /* The machine uses an external oscillator circuit */ + val |= SRC_XTALCR_SXTALDIS; + pr_info("disabling SXTALO\n"); + } + if (of_property_read_bool(np, "disable-mxtalo")) { + /* Disable this too: also run by external oscillator */ + val |= SRC_XTALCR_MXTALOVER; + val &= ~SRC_XTALCR_MXTALEN; + pr_info("disabling MXTALO\n"); + } + writel(val, src_base + SRC_XTALCR); + register_reboot_notifier(&nomadik_clk_reboot_notifier); + + of_clk_init(nomadik_src_clk_match); } diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c deleted file mode 100644 index 32062977f453..000000000000 --- a/drivers/clk/clk-zynq.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * Copyright (c) 2012 National Instruments - * - * Josh Cartwright <josh.cartwright@ni.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/io.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/clk/zynq.h> - -static void __iomem *slcr_base; - -struct zynq_pll_clk { - struct clk_hw hw; - void __iomem *pll_ctrl; - void __iomem *pll_cfg; -}; - -#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) - -#define CTRL_PLL_FDIV(x) ((x) >> 12) - -static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); - return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); -} - -static const struct clk_ops zynq_pll_clk_ops = { - .recalc_rate = zynq_pll_recalc_rate, -}; - -static void __init zynq_pll_clk_setup(struct device_node *np) -{ - struct clk_init_data init; - struct zynq_pll_clk *pll; - const char *parent_name; - struct clk *clk; - u32 regs[2]; - int ret; - - ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); - if (WARN_ON(ret)) - return; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (WARN_ON(!pll)) - return; - - pll->pll_ctrl = slcr_base + regs[0]; - pll->pll_cfg = slcr_base + regs[1]; - - of_property_read_string(np, "clock-output-names", &init.name); - - init.ops = &zynq_pll_clk_ops; - parent_name = of_clk_get_parent_name(np, 0); - init.parent_names = &parent_name; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(ret)) - return; -} -CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup); - -struct zynq_periph_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *gates[2]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) - -static const u8 periph_clk_parent_map[] = { - 0, 0, 1, 2 -}; -#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) -#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); -} - -static u8 zynq_periph_get_parent(struct clk_hw *hw) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); -} - -static const struct clk_ops zynq_periph_clk_ops = { - .recalc_rate = zynq_periph_recalc_rate, - .get_parent = zynq_periph_get_parent, -}; - -static void __init zynq_periph_clk_setup(struct device_node *np) -{ - struct zynq_periph_clk *periph; - const char *parent_names[3]; - struct clk_init_data init; - int clk_num = 0, err; - const char *name; - struct clk *clk; - u32 reg; - int i; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - periph = kzalloc(sizeof(*periph), GFP_KERNEL); - if (WARN_ON(!periph)) - return; - - periph->clk_ctrl = slcr_base + reg; - spin_lock_init(&periph->clkact_lock); - - init.name = np->name; - init.ops = &zynq_periph_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - periph->hw.init = &init; - - clk = clk_register(NULL, &periph->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - err = of_property_read_string_index(np, "clock-output-names", 0, - &name); - if (WARN_ON(err)) - return; - - periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 0, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[0]))) - return; - clk_num++; - - /* some periph clks have 2 downstream gates */ - err = of_property_read_string_index(np, "clock-output-names", 1, - &name); - if (err != -ENODATA) { - periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 1, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[1]))) - return; - clk_num++; - } - - periph->onecell_data.clks = periph->gates; - periph->onecell_data.clk_num = clk_num; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &periph->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup); - -/* CPU Clock domain is modelled as a mux with 4 children subclks, whose - * derivative rates depend on CLK_621_TRUE - */ - -struct zynq_cpu_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *subclks[4]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) - -static const u8 zynq_cpu_clk_parent_map[] = { - 1, 1, 2, 0 -}; -#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) -#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); -} - -static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); -} - -static const struct clk_ops zynq_cpu_clk_ops = { - .get_parent = zynq_cpu_clk_get_parent, - .recalc_rate = zynq_cpu_clk_recalc_rate, -}; - -struct zynq_cpu_subclk { - struct clk_hw hw; - void __iomem *clk_621; - enum { - CPU_SUBCLK_6X4X, - CPU_SUBCLK_3X2X, - CPU_SUBCLK_2X, - CPU_SUBCLK_1X, - } which; -}; - -#define CLK_621_TRUE(x) ((x) & 1) - -#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); - -static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - unsigned long uninitialized_var(rate); - struct zynq_cpu_subclk *subclk; - bool is_621; - - subclk = to_zynq_cpu_subclk(hw) - is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); - - switch (subclk->which) { - case CPU_SUBCLK_6X4X: - rate = parent_rate; - break; - case CPU_SUBCLK_3X2X: - rate = parent_rate / 2; - break; - case CPU_SUBCLK_2X: - rate = parent_rate / (is_621 ? 3 : 2); - break; - case CPU_SUBCLK_1X: - rate = parent_rate / (is_621 ? 6 : 4); - break; - }; - - return rate; -} - -static const struct clk_ops zynq_cpu_subclk_ops = { - .recalc_rate = zynq_cpu_subclk_recalc_rate, -}; - -static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, - void __iomem *clk_621) -{ - struct zynq_cpu_subclk *subclk; - struct clk_init_data init; - struct clk *clk; - int err; - - err = of_property_read_string_index(np, "clock-output-names", - which, &init.name); - if (WARN_ON(err)) - goto err_read_output_name; - - subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); - if (!subclk) - goto err_subclk_alloc; - - subclk->clk_621 = clk_621; - subclk->which = which; - - init.ops = &zynq_cpu_subclk_ops; - init.parent_names = &np->name; - init.num_parents = 1; - - subclk->hw.init = &init; - - clk = clk_register(NULL, &subclk->hw); - if (WARN_ON(IS_ERR(clk))) - goto err_clk_register; - - return clk; - -err_clk_register: - kfree(subclk); -err_subclk_alloc: -err_read_output_name: - return ERR_PTR(-EINVAL); -} - -static void __init zynq_cpu_clk_setup(struct device_node *np) -{ - struct zynq_cpu_clk *cpuclk; - const char *parent_names[3]; - struct clk_init_data init; - void __iomem *clk_621; - struct clk *clk; - u32 reg[2]; - int err; - int i; - - err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); - if (WARN_ON(err)) - return; - - cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); - if (WARN_ON(!cpuclk)) - return; - - cpuclk->clk_ctrl = slcr_base + reg[0]; - clk_621 = slcr_base + reg[1]; - spin_lock_init(&cpuclk->clkact_lock); - - init.name = np->name; - init.ops = &zynq_cpu_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - cpuclk->hw.init = &init; - - clk = clk_register(NULL, &cpuclk->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - for (i = 0; i < 4; i++) { - cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); - if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) - return; - } - - cpuclk->onecell_data.clks = cpuclk->subclks; - cpuclk->onecell_data.clk_num = i; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &cpuclk->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup); - -void __init xilinx_zynq_clocks_init(void __iomem *slcr) -{ - slcr_base = slcr; - of_clk_init(NULL); -} diff --git a/drivers/clk/zynq/Makefile b/drivers/clk/zynq/Makefile new file mode 100644 index 000000000000..156d923f4fa9 --- /dev/null +++ b/drivers/clk/zynq/Makefile @@ -0,0 +1,3 @@ +# Zynq clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQ) += clkc.o pll.o diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c new file mode 100644 index 000000000000..5c205b60a82a --- /dev/null +++ b/drivers/clk/zynq/clkc.c @@ -0,0 +1,533 @@ +/* + * Zynq clock controller + * + * Copyright (C) 2012 - 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/io.h> + +static void __iomem *zynq_slcr_base_priv; + +#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100) +#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104) +#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108) +#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c) +#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120) +#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124) +#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128) +#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c) +#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140) +#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144) +#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148) +#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c) +#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150) +#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154) +#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158) +#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c) +#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160) +#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164) +#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168) +#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170) +#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4) +#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304) + +#define NUM_MIO_PINS 54 + +enum zynq_clk { + armpll, ddrpll, iopll, + cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, + ddr2x, ddr3x, dci, + lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, + sdio0, sdio1, uart0, uart1, spi0, spi1, dma, + usb0_aper, usb1_aper, gem0_aper, gem1_aper, + sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper, + i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper, + smc_aper, swdt, dbg_trc, dbg_apb, clk_max}; + +static struct clk *ps_clk; +static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; + +static DEFINE_SPINLOCK(armpll_lock); +static DEFINE_SPINLOCK(ddrpll_lock); +static DEFINE_SPINLOCK(iopll_lock); +static DEFINE_SPINLOCK(armclk_lock); +static DEFINE_SPINLOCK(ddrclk_lock); +static DEFINE_SPINLOCK(dciclk_lock); +static DEFINE_SPINLOCK(gem0clk_lock); +static DEFINE_SPINLOCK(gem1clk_lock); +static DEFINE_SPINLOCK(canclk_lock); +static DEFINE_SPINLOCK(canmioclk_lock); +static DEFINE_SPINLOCK(dbgclk_lock); +static DEFINE_SPINLOCK(aperclk_lock); + +static const char dummy_nm[] __initconst = "dummy_name"; + +static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"}; +static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"}; +static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"}; +static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm}; +static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm}; +static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate", + "can0_mio_mux"}; +static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate", + "can1_mio_mux"}; +static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", + dummy_nm}; + +static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"}; +static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"}; +static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"}; +static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; + +static void __init zynq_clk_register_fclk(enum zynq_clk fclk, + const char *clk_name, void __iomem *fclk_ctrl_reg, + const char **parents) +{ + struct clk *clk; + char *mux_name; + char *div0_name; + char *div1_name; + spinlock_t *fclk_lock; + spinlock_t *fclk_gate_lock; + void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8; + + fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL); + if (!fclk_lock) + goto err; + fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL); + if (!fclk_gate_lock) + goto err; + spin_lock_init(fclk_lock); + spin_lock_init(fclk_gate_lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name); + div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name); + div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + fclk_ctrl_reg, 4, 2, 0, fclk_lock); + + clk = clk_register_divider(NULL, div0_name, mux_name, + 0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, fclk_lock); + + clk = clk_register_divider(NULL, div1_name, div0_name, + CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + fclk_lock); + + clks[fclk] = clk_register_gate(NULL, clk_name, + div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, + 0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); + kfree(mux_name); + kfree(div0_name); + kfree(div1_name); + + return; + +err: + clks[fclk] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0, + enum zynq_clk clk1, const char *clk_name0, + const char *clk_name1, void __iomem *clk_ctrl, + const char **parents, unsigned int two_gates) +{ + struct clk *clk; + char *mux_name; + char *div_name; + spinlock_t *lock; + + lock = kmalloc(sizeof(*lock), GFP_KERNEL); + if (!lock) + goto err; + spin_lock_init(lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0); + div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + clk_ctrl, 4, 2, 0, lock); + + clk = clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock); + + clks[clk0] = clk_register_gate(NULL, clk_name0, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock); + if (two_gates) + clks[clk1] = clk_register_gate(NULL, clk_name1, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock); + + kfree(mux_name); + kfree(div_name); + + return; + +err: + clks[clk0] = ERR_PTR(-ENOMEM); + if (two_gates) + clks[clk1] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_setup(struct device_node *np) +{ + int i; + u32 tmp; + int ret; + struct clk *clk; + char *clk_name; + const char *clk_output_name[clk_max]; + const char *cpu_parents[4]; + const char *periph_parents[4]; + const char *swdt_ext_clk_mux_parents[2]; + const char *can_mio_mux_parents[NUM_MIO_PINS]; + + pr_info("Zynq clock init\n"); + + /* get clock output names from DT */ + for (i = 0; i < clk_max; i++) { + if (of_property_read_string_index(np, "clock-output-names", + i, &clk_output_name[i])) { + pr_err("%s: clock output name not in DT\n", __func__); + BUG(); + } + } + cpu_parents[0] = clk_output_name[armpll]; + cpu_parents[1] = clk_output_name[armpll]; + cpu_parents[2] = clk_output_name[ddrpll]; + cpu_parents[3] = clk_output_name[iopll]; + periph_parents[0] = clk_output_name[iopll]; + periph_parents[1] = clk_output_name[iopll]; + periph_parents[2] = clk_output_name[armpll]; + periph_parents[3] = clk_output_name[ddrpll]; + + /* ps_clk */ + ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); + if (ret) { + pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); + tmp = 33333333; + } + ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, CLK_IS_ROOT, + tmp); + + /* PLLs */ + clk = clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL, + SLCR_PLL_STATUS, 0, &armpll_lock); + clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll], + armpll_parents, 2, 0, SLCR_ARMPLL_CTRL, 4, 1, 0, + &armpll_lock); + + clk = clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL, + SLCR_PLL_STATUS, 1, &ddrpll_lock); + clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll], + ddrpll_parents, 2, 0, SLCR_DDRPLL_CTRL, 4, 1, 0, + &ddrpll_lock); + + clk = clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL, + SLCR_PLL_STATUS, 2, &iopll_lock); + clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll], + iopll_parents, 2, 0, SLCR_IOPLL_CTRL, 4, 1, 0, + &iopll_lock); + + /* CPU clocks */ + tmp = readl(SLCR_621_TRUE) & 1; + clk = clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, 0, + SLCR_ARM_CLK_CTRL, 4, 2, 0, &armclk_lock); + clk = clk_register_divider(NULL, "cpu_div", "cpu_mux", 0, + SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &armclk_lock); + + clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x], + "cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0, + 1, 2); + clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x], + "cpu_3or2x_div", CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1, + 2 + tmp); + clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x], + "cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, + 26, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1, + 4 + 2 * tmp); + clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x], + "cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27, + 0, &armclk_lock); + + /* Timers */ + swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x]; + for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + swdt_ext_clk_input_names[i]); + if (idx >= 0) + swdt_ext_clk_mux_parents[i + 1] = + of_clk_get_parent_name(np, idx); + else + swdt_ext_clk_mux_parents[i + 1] = dummy_nm; + } + clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt], + swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT, + SLCR_SWDT_CLK_SEL, 0, 1, 0, &gem0clk_lock); + + /* DDR clocks */ + clk = clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x], + "ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr2x]); + clk = clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x], + "ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr3x]); + + clk = clk_register_divider(NULL, "dci_div0", "ddrpll", 0, + SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock); + clk = clk_register_divider(NULL, "dci_div1", "dci_div0", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &dciclk_lock); + clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0, + &dciclk_lock); + clk_prepare_enable(clks[dci]); + + /* Peripheral clocks */ + for (i = fclk0; i <= fclk3; i++) + zynq_clk_register_fclk(i, clk_output_name[i], + SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), + periph_parents); + + zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL, + SLCR_LQSPI_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(smc, 0, clk_output_name[smc], NULL, + SLCR_SMC_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(pcap, 0, clk_output_name[pcap], NULL, + SLCR_PCAP_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0], + clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0], + clk_output_name[uart1], SLCR_UART_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0], + clk_output_name[spi1], SLCR_SPI_CLK_CTRL, + periph_parents, 1); + + for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem0_emio_input_names[i]); + if (idx >= 0) + gem0_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem0_mux", periph_parents, 4, 0, + SLCR_GEM0_CLK_CTRL, 4, 2, 0, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0, + SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div1", "gem0_div0", + CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem0clk_lock); + clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0, + SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock); + clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0], + "gem0_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock); + + for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem1_emio_input_names[i]); + if (idx >= 0) + gem1_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem1_mux", periph_parents, 4, 0, + SLCR_GEM1_CLK_CTRL, 4, 2, 0, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0, + SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div1", "gem1_div0", + CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem1clk_lock); + clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0, + SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock); + clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1], + "gem1_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock); + + tmp = strlen("mio_clk_00x"); + clk_name = kmalloc(tmp, GFP_KERNEL); + for (i = 0; i < NUM_MIO_PINS; i++) { + int idx; + + snprintf(clk_name, tmp, "mio_clk_%2.2d", i); + idx = of_property_match_string(np, "clock-names", clk_name); + if (idx >= 0) + can_mio_mux_parents[i] = of_clk_get_parent_name(np, + idx); + else + can_mio_mux_parents[i] = dummy_nm; + } + kfree(clk_name); + clk = clk_register_mux(NULL, "can_mux", periph_parents, 4, 0, + SLCR_CAN_CLK_CTRL, 4, 2, 0, &canclk_lock); + clk = clk_register_divider(NULL, "can_div0", "can_mux", 0, + SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &canclk_lock); + clk = clk_register_divider(NULL, "can_div1", "can_div0", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &canclk_lock); + clk = clk_register_gate(NULL, "can0_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0, + &canclk_lock); + clk = clk_register_gate(NULL, "can1_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0, + &canclk_lock); + clk = clk_register_mux(NULL, "can0_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, &canmioclk_lock); + clk = clk_register_mux(NULL, "can1_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 16, 6, 0, &canmioclk_lock); + clks[can0] = clk_register_mux(NULL, clk_output_name[can0], + can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, &canmioclk_lock); + clks[can1] = clk_register_mux(NULL, clk_output_name[can1], + can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 22, 1, 0, &canmioclk_lock); + + for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + dbgtrc_emio_input_names[i]); + if (idx >= 0) + dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "dbg_mux", periph_parents, 4, 0, + SLCR_DBG_CLK_CTRL, 4, 2, 0, &dbgclk_lock); + clk = clk_register_divider(NULL, "dbg_div", "dbg_mux", 0, + SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock); + clk = clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, 0, + SLCR_DBG_CLK_CTRL, 6, 1, 0, &dbgclk_lock); + clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc], + "dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL, + 0, 0, &dbgclk_lock); + clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb], + clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, + &dbgclk_lock); + + /* One gated clock for all APER clocks. */ + clks[dma] = clk_register_gate(NULL, clk_output_name[dma], + clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, + &aperclk_lock); + clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0, + &aperclk_lock); + clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0, + &aperclk_lock); + clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0, + &aperclk_lock); + clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0, + &aperclk_lock); + clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0, + &aperclk_lock); + clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0, + &aperclk_lock); + clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0, + &aperclk_lock); + clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0, + &aperclk_lock); + clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0, + &aperclk_lock); + clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0, + &aperclk_lock); + clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0, + &aperclk_lock); + clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0, + &aperclk_lock); + clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0, + &aperclk_lock); + clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0, + &aperclk_lock); + clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0, + &aperclk_lock); + clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0, + &aperclk_lock); + clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0, + &aperclk_lock); + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (IS_ERR(clks[i])) { + pr_err("Zynq clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + BUG(); + } + } + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); + +void __init zynq_clock_init(void __iomem *slcr_base) +{ + zynq_slcr_base_priv = slcr_base; + of_clk_init(NULL); +} diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c new file mode 100644 index 000000000000..47e307c25a7b --- /dev/null +++ b/drivers/clk/zynq/pll.c @@ -0,0 +1,235 @@ +/* + * Zynq PLL driver + * + * Copyright (C) 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> + +/** + * struct zynq_pll + * @hw: Handle between common and hardware-specific interfaces + * @pll_ctrl: PLL control register + * @pll_status: PLL status register + * @lock: Register lock + * @lockbit: Indicates the associated PLL_LOCKED bit in the PLL status + * register. + */ +struct zynq_pll { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_status; + spinlock_t *lock; + u8 lockbit; +}; +#define to_zynq_pll(_hw) container_of(_hw, struct zynq_pll, hw) + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f000 +#define PLLCTRL_FBDIV_SHIFT 12 +#define PLLCTRL_BPQUAL_MASK (1 << 3) +#define PLLCTRL_PWRDWN_MASK 2 +#define PLLCTRL_PWRDWN_SHIFT 1 +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_SHIFT 0 + +/** + * zynq_pll_round_rate() - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * Returns frequency closest to @rate the hardware can generate. + */ +static long zynq_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + if (fbdiv < 13) + fbdiv = 13; + else if (fbdiv > 66) + fbdiv = 66; + + return *prate * fbdiv; +} + +/** + * zynq_pll_recalc_rate() - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * Returns current clock frequency. + */ +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll *clk = to_zynq_pll(hw); + u32 fbdiv; + + /* + * makes probably sense to redundantly save fbdiv in the struct + * zynq_pll to save the IO access. + */ + fbdiv = (readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >> + PLLCTRL_FBDIV_SHIFT; + + return parent_rate * fbdiv; +} + +/** + * zynq_pll_is_enabled - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * Returns 1 if the clock is enabled, 0 otherwise. + * + * Not sure this is a good idea, but since disabled means bypassed for + * this clock implementation we say we are always enabled. + */ +static int zynq_pll_is_enabled(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); + + return !(reg & (PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK)); +} + +/** + * zynq_pll_enable - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static int zynq_pll_enable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (zynq_pll_is_enabled(hw)) + return 0; + + pr_info("PLL: enable\n"); + + /* Power up PLL and wait for lock */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg &= ~(PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK); + writel(reg, clk->pll_ctrl); + while (!(readl(clk->pll_status) & (1 << clk->lockbit))) + ; + + spin_unlock_irqrestore(clk->lock, flags); + + return 0; +} + +/** + * zynq_pll_disable - Disable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static void zynq_pll_disable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (!zynq_pll_is_enabled(hw)) + return; + + pr_info("PLL: shutdown\n"); + + /* shut down PLL */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg |= PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK; + writel(reg, clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); +} + +static const struct clk_ops zynq_pll_ops = { + .enable = zynq_pll_enable, + .disable = zynq_pll_disable, + .is_enabled = zynq_pll_is_enabled, + .round_rate = zynq_pll_round_rate, + .recalc_rate = zynq_pll_recalc_rate +}; + +/** + * clk_register_zynq_pll() - Register PLL with the clock framework + * @np Pointer to the DT device node + */ +struct clk *clk_register_zynq_pll(const char *name, const char *parent, + void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, + spinlock_t *lock) +{ + struct zynq_pll *pll; + struct clk *clk; + u32 reg; + const char *parent_arr[1] = {parent}; + unsigned long flags = 0; + struct clk_init_data initd = { + .name = name, + .parent_names = parent_arr, + .ops = &zynq_pll_ops, + .num_parents = 1, + .flags = 0 + }; + + pll = kmalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* Populate the struct */ + pll->hw.init = &initd; + pll->pll_ctrl = pll_ctrl; + pll->pll_status = pll_status; + pll->lockbit = lock_index; + pll->lock = lock; + + spin_lock_irqsave(pll->lock, flags); + + reg = readl(pll->pll_ctrl); + reg &= ~PLLCTRL_BPQUAL_MASK; + writel(reg, pll->pll_ctrl); + + spin_unlock_irqrestore(pll->lock, flags); + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + goto free_pll; + + return clk; + +free_pll: + kfree(pll); + + return clk; +} diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c index 685bc60e210a..4cbe28c74631 100644 --- a/drivers/clocksource/cadence_ttc_timer.c +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -51,6 +51,8 @@ #define TTC_CNT_CNTRL_DISABLE_MASK 0x1 +#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */ + /* * Setup the timers to use pre-scaling, using a fixed value for now that will * work across most input frequency, but it may need to be more dynamic @@ -396,8 +398,9 @@ static void __init ttc_timer_init(struct device_node *timer) { unsigned int irq; void __iomem *timer_baseaddr; - struct clk *clk; + struct clk *clk_cs, *clk_ce; static int initialized; + int clksel; if (initialized) return; @@ -421,14 +424,24 @@ static void __init ttc_timer_init(struct device_node *timer) BUG(); } - clk = of_clk_get_by_name(timer, "cpu_1x"); - if (IS_ERR(clk)) { + clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_cs = of_clk_get(timer, clksel); + if (IS_ERR(clk_cs)) { + pr_err("ERROR: timer input clock not found\n"); + BUG(); + } + + clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_ce = of_clk_get(timer, clksel); + if (IS_ERR(clk_ce)) { pr_err("ERROR: timer input clock not found\n"); BUG(); } - ttc_setup_clocksource(clk, timer_baseaddr); - ttc_setup_clockevent(clk, timer_baseaddr + 4, irq); + ttc_setup_clocksource(clk_cs, timer_baseaddr); + ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq); pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq); } diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index e405531e1cc5..b9415b622f55 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -13,6 +13,9 @@ #include <linux/io.h> #include <linux/clockchips.h> #include <linux/clocksource.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/delay.h> @@ -188,22 +191,15 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -void __init nmdk_timer_init(void __iomem *base, int irq) +static void __init __nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; - struct clk *clk0, *pclk0; mtu_base = base; - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - BUG_ON(clk_prepare(pclk0) < 0); - BUG_ON(clk_enable(pclk0) < 0); - - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - BUG_ON(clk_prepare(clk0) < 0); - BUG_ON(clk_enable(clk0) < 0); + BUG_ON(clk_prepare_enable(pclk)); + BUG_ON(clk_prepare_enable(clk)); /* * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz @@ -213,7 +209,7 @@ void __init nmdk_timer_init(void __iomem *base, int irq) * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer * with 16 gives too low timer resolution. */ - rate = clk_get_rate(clk0); + rate = clk_get_rate(clk); if (rate > 32000000) { rate /= 16; clk_prescale = MTU_CRn_PRESCALE_16; @@ -247,3 +243,43 @@ void __init nmdk_timer_init(void __iomem *base, int irq) mtu_delay_timer.freq = rate; register_current_timer_delay(&mtu_delay_timer); } + +void __init nmdk_timer_init(void __iomem *base, int irq) +{ + struct clk *clk0, *pclk0; + + pclk0 = clk_get_sys("mtu0", "apb_pclk"); + BUG_ON(IS_ERR(pclk0)); + clk0 = clk_get_sys("mtu0", NULL); + BUG_ON(IS_ERR(clk0)); + + __nmdk_timer_init(base, irq, pclk0, clk0); +} + +static void __init nmdk_timer_of_init(struct device_node *node) +{ + struct clk *pclk; + struct clk *clk; + void __iomem *base; + int irq; + + base = of_iomap(node, 0); + if (!base) + panic("Can't remap registers"); + + pclk = of_clk_get_by_name(node, "apb_pclk"); + if (IS_ERR(pclk)) + panic("could not get apb_pclk"); + + clk = of_clk_get_by_name(node, "timclk"); + if (IS_ERR(clk)) + panic("could not get timclk"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + __nmdk_timer_init(base, irq, pclk, clk); +} +CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", + nmdk_timer_of_init); diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index a97bb6c1596c..c3dc1c04a5df 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -863,7 +863,7 @@ static struct of_device_id sahara_dt_ids[] = { { .compatible = "fsl,imx27-sahara" }, { /* sentinel */ } }; -MODULE_DEVICE_TABLE(platform, sahara_dt_ids); +MODULE_DEVICE_TABLE(of, sahara_dt_ids); static int sahara_probe(struct platform_device *pdev) { diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 32f480622b97..8c2777cf02f6 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -1743,6 +1743,11 @@ static int ux500_cryp_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume); +static const struct of_device_id ux500_cryp_match[] = { + { .compatible = "stericsson,ux500-cryp" }, + { }, +}; + static struct platform_driver cryp_driver = { .probe = ux500_cryp_probe, .remove = ux500_cryp_remove, @@ -1750,6 +1755,7 @@ static struct platform_driver cryp_driver = { .driver = { .owner = THIS_MODULE, .name = "cryp1", + .of_match_table = ux500_cryp_match, .pm = &ux500_cryp_pm, } }; diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index cf5508967539..3b8f661d0edf 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -1961,6 +1961,11 @@ static int ux500_hash_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume); +static const struct of_device_id ux500_hash_match[] = { + { .compatible = "stericsson,ux500-hash" }, + { }, +}; + static struct platform_driver hash_driver = { .probe = ux500_hash_probe, .remove = ux500_hash_remove, @@ -1968,6 +1973,7 @@ static struct platform_driver hash_driver = { .driver = { .owner = THIS_MODULE, .name = "hash1", + .of_match_table = ux500_hash_match, .pm = &ux500_hash_pm, } }; diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 3cfd0931fbfb..82430ad8ba62 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -1462,7 +1462,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, size_t addr = 0; struct gtt_range *gt; struct drm_gem_object *obj; - int ret; + int ret = 0; /* if we want to turn of the cursor ignore width and height */ if (!handle) { @@ -1499,7 +1499,8 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, if (obj->size < width * height * 4) { dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } gt = container_of(obj, struct gtt_range, gem); @@ -1508,7 +1509,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, ret = psb_gtt_pin(gt); if (ret) { dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; + goto unref_cursor; } addr = gt->offset; /* Or resource.start ??? */ @@ -1532,9 +1533,14 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; } - return 0; + + psb_intel_crtc->cursor_obj = obj; + return ret; + +unref_cursor: + drm_gem_object_unreference(obj); + return ret; } static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) @@ -1750,6 +1756,19 @@ static void cdv_intel_crtc_destroy(struct drm_crtc *crtc) kfree(psb_intel_crtc); } +static void cdv_intel_crtc_disable(struct drm_crtc *crtc) +{ + struct gtt_range *gt; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + gt = to_psb_fb(crtc->fb)->gtt; + psb_gtt_unpin(gt); + } +} + const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { .dpms = cdv_intel_crtc_dpms, .mode_fixup = cdv_intel_crtc_mode_fixup, @@ -1757,6 +1776,7 @@ const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { .mode_set_base = cdv_intel_pipe_set_base, .prepare = cdv_intel_crtc_prepare, .commit = cdv_intel_crtc_commit, + .disable = cdv_intel_crtc_disable, }; const struct drm_crtc_funcs cdv_intel_crtc_funcs = { diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 1534e220097a..8b1b6d923abe 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -121,8 +121,8 @@ static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) unsigned long address; int ret; unsigned long pfn; - /* FIXME: assumes fb at stolen base which may not be true */ - unsigned long phys_addr = (unsigned long)dev_priv->stolen_base; + unsigned long phys_addr = (unsigned long)dev_priv->stolen_base + + psbfb->gtt->offset; page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; address = (unsigned long)vmf->virtual_address - (vmf->pgoff << PAGE_SHIFT); diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 6e8f42b61ff6..6666493789d1 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -843,7 +843,7 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range *cursor_gt = psb_intel_crtc->cursor_gt; struct drm_gem_object *obj; void *tmp_dst, *tmp_src; - int ret, i, cursor_pages; + int ret = 0, i, cursor_pages; /* if we want to turn of the cursor ignore width and height */ if (!handle) { @@ -880,7 +880,8 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, if (obj->size < width * height * 4) { dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } gt = container_of(obj, struct gtt_range, gem); @@ -889,13 +890,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, ret = psb_gtt_pin(gt); if (ret) { dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; + goto unref_cursor; } if (dev_priv->ops->cursor_needs_phys) { if (cursor_gt == NULL) { dev_err(dev->dev, "No hardware cursor mem available"); - return -ENOMEM; + ret = -ENOMEM; + goto unref_cursor; } /* Prevent overflow */ @@ -936,9 +938,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; } - return 0; + + psb_intel_crtc->cursor_obj = obj; + return ret; + +unref_cursor: + drm_gem_object_unreference(obj); + return ret; } static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) @@ -1150,6 +1157,19 @@ static void psb_intel_crtc_destroy(struct drm_crtc *crtc) kfree(psb_intel_crtc); } +static void psb_intel_crtc_disable(struct drm_crtc *crtc) +{ + struct gtt_range *gt; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + gt = to_psb_fb(crtc->fb)->gtt; + psb_gtt_unpin(gt); + } +} + const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { .dpms = psb_intel_crtc_dpms, .mode_fixup = psb_intel_crtc_mode_fixup, @@ -1157,6 +1177,7 @@ const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { .mode_set_base = psb_intel_pipe_set_base, .prepare = psb_intel_crtc_prepare, .commit = psb_intel_crtc_commit, + .disable = psb_intel_crtc_disable, }; const struct drm_crtc_funcs psb_intel_crtc_funcs = { diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 4c47b449b775..d4ea6c265ce1 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1777,10 +1777,13 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * arranged in priority order. */ intel_ddc_get_modes(connector, &intel_sdvo->ddc); - if (list_empty(&connector->probed_modes) == false) - goto end; - /* Fetch modes from VBT */ + /* + * Fetch modes from VBT. For SDVO prefer the VBT mode since some + * SDVO->LVDS transcoders can't cope with the EDID mode. Since + * drm_mode_probed_add adds the mode at the head of the list we add it + * last. + */ if (dev_priv->sdvo_lvds_vbt_mode != NULL) { newmode = drm_mode_duplicate(connector->dev, dev_priv->sdvo_lvds_vbt_mode); @@ -1792,7 +1795,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) } } -end: list_for_each_entry(newmode, &connector->probed_modes, head) { if (newmode->type & DRM_MODE_TYPE_PREFERRED) { intel_sdvo->sdvo_lvds_fixed_mode = @@ -2790,12 +2792,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915; } - /* Only enable the hotplug irq if we need it, to work around noisy - * hotplug lines. - */ - if (intel_sdvo->hotplug_active) - intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C; - intel_encoder->compute_config = intel_sdvo_compute_config; intel_encoder->disable = intel_disable_sdvo; intel_encoder->mode_set = intel_sdvo_mode_set; @@ -2814,6 +2810,14 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err_output; } + /* Only enable the hotplug irq if we need it, to work around noisy + * hotplug lines. + */ + if (intel_sdvo->hotplug_active) { + intel_encoder->hpd_pin = + intel_sdvo->is_sdvob ? HPD_SDVO_B : HPD_SDVO_C; + } + /* * Cloning SDVO with anything is often impossible, since the SDVO * encoder can request a special input timing mode. And even if that's diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index dc3ae5c56f56..d39a5cede0b0 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -264,9 +264,12 @@ static struct mt_class mt_classes[] = { static void mt_free_input_name(struct hid_input *hi) { struct hid_device *hdev = hi->report->device; + const char *name = hi->input->name; - if (hi->input->name != hdev->name) - kfree(hi->input->name); + if (name != hdev->name) { + hi->input->name = hdev->name; + kfree(name); + } } static ssize_t mt_show_quirks(struct device *dev, @@ -1040,11 +1043,11 @@ static void mt_remove(struct hid_device *hdev) struct hid_input *hi; sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); - hid_hw_stop(hdev); - list_for_each_entry(hi, &hdev->inputs, list) mt_free_input_name(hi); + hid_hw_stop(hdev); + kfree(td); hid_set_drvdata(hdev, NULL); } diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 7e76922a4ba9..f920619cd6da 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -331,26 +331,68 @@ static int adm1021_detect(struct i2c_client *client, man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID); + if (man_id < 0 || dev_id < 0) + return -ENODEV; + if (man_id == 0x4d && dev_id == 0x01) type_name = "max1617a"; else if (man_id == 0x41) { if ((dev_id & 0xF0) == 0x30) type_name = "adm1023"; - else + else if ((dev_id & 0xF0) == 0x00) type_name = "adm1021"; + else + return -ENODEV; } else if (man_id == 0x49) type_name = "thmc10"; else if (man_id == 0x23) type_name = "gl523sm"; else if (man_id == 0x54) type_name = "mc1066"; - /* LM84 Mfr ID in a different place, and it has more unused bits */ - else if (conv_rate == 0x00 - && (config & 0x7F) == 0x00 - && (status & 0xAB) == 0x00) - type_name = "lm84"; - else - type_name = "max1617"; + else { + int lte, rte, lhi, rhi, llo, rlo; + + /* extra checks for LM84 and MAX1617 to avoid misdetections */ + + llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0)); + rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1)); + + /* fail if any of the additional register reads failed */ + if (llo < 0 || rlo < 0) + return -ENODEV; + + lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0)); + rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1)); + lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0)); + rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1)); + + /* + * Fail for negative temperatures and negative high limits. + * This check also catches read errors on the tested registers. + */ + if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0) + return -ENODEV; + + /* fail if all registers hold the same value */ + if (lte == rte && lte == lhi && lte == rhi && lte == llo + && lte == rlo) + return -ENODEV; + + /* + * LM84 Mfr ID is in a different place, + * and it has more unused bits. + */ + if (conv_rate == 0x00 + && (config & 0x7F) == 0x00 + && (status & 0xAB) == 0x00) { + type_name = "lm84"; + } else { + /* fail if low limits are larger than high limits */ + if ((s8)llo > lhi || (s8)rlo > rhi) + return -ENODEV; + type_name = "max1617"; + } + } pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n", type_name, i2c_adapter_id(adapter), client->addr); diff --git a/drivers/md/bcache/Kconfig b/drivers/md/bcache/Kconfig index 05c220d05e23..f950c9d29f3e 100644 --- a/drivers/md/bcache/Kconfig +++ b/drivers/md/bcache/Kconfig @@ -1,7 +1,6 @@ config BCACHE tristate "Block device as cache" - select CLOSURES ---help--- Allows a block device to be used as cache for other devices; uses a btree for indexing and the layout is optimized for SSDs. diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 340146d7c17f..d3e15b42a4ab 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -1241,7 +1241,7 @@ void bch_cache_set_stop(struct cache_set *); struct cache_set *bch_cache_set_alloc(struct cache_sb *); void bch_btree_cache_free(struct cache_set *); int bch_btree_cache_alloc(struct cache_set *); -void bch_writeback_init_cached_dev(struct cached_dev *); +void bch_cached_dev_writeback_init(struct cached_dev *); void bch_moving_init_cache_set(struct cache_set *); void bch_cache_allocator_exit(struct cache *ca); diff --git a/drivers/md/bcache/stats.c b/drivers/md/bcache/stats.c index 64e679449c2a..b8730e714d69 100644 --- a/drivers/md/bcache/stats.c +++ b/drivers/md/bcache/stats.c @@ -93,24 +93,6 @@ static struct attribute *bch_stats_files[] = { }; static KTYPE(bch_stats); -static void scale_accounting(unsigned long data); - -void bch_cache_accounting_init(struct cache_accounting *acc, - struct closure *parent) -{ - kobject_init(&acc->total.kobj, &bch_stats_ktype); - kobject_init(&acc->five_minute.kobj, &bch_stats_ktype); - kobject_init(&acc->hour.kobj, &bch_stats_ktype); - kobject_init(&acc->day.kobj, &bch_stats_ktype); - - closure_init(&acc->cl, parent); - init_timer(&acc->timer); - acc->timer.expires = jiffies + accounting_delay; - acc->timer.data = (unsigned long) acc; - acc->timer.function = scale_accounting; - add_timer(&acc->timer); -} - int bch_cache_accounting_add_kobjs(struct cache_accounting *acc, struct kobject *parent) { @@ -244,3 +226,19 @@ void bch_mark_sectors_bypassed(struct search *s, int sectors) atomic_add(sectors, &dc->accounting.collector.sectors_bypassed); atomic_add(sectors, &s->op.c->accounting.collector.sectors_bypassed); } + +void bch_cache_accounting_init(struct cache_accounting *acc, + struct closure *parent) +{ + kobject_init(&acc->total.kobj, &bch_stats_ktype); + kobject_init(&acc->five_minute.kobj, &bch_stats_ktype); + kobject_init(&acc->hour.kobj, &bch_stats_ktype); + kobject_init(&acc->day.kobj, &bch_stats_ktype); + + closure_init(&acc->cl, parent); + init_timer(&acc->timer); + acc->timer.expires = jiffies + accounting_delay; + acc->timer.data = (unsigned long) acc; + acc->timer.function = scale_accounting; + add_timer(&acc->timer); +} diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index c8046bc4aa57..f88e2b653a3f 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -634,11 +634,10 @@ static int open_dev(struct block_device *b, fmode_t mode) return 0; } -static int release_dev(struct gendisk *b, fmode_t mode) +static void release_dev(struct gendisk *b, fmode_t mode) { struct bcache_device *d = b->private_data; closure_put(&d->cl); - return 0; } static int ioctl_dev(struct block_device *b, fmode_t mode, @@ -732,8 +731,7 @@ static void bcache_device_free(struct bcache_device *d) if (d->c) bcache_device_detach(d); - - if (d->disk) + if (d->disk && d->disk->flags & GENHD_FL_UP) del_gendisk(d->disk); if (d->disk && d->disk->queue) blk_cleanup_queue(d->disk->queue); @@ -756,12 +754,9 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size) if (!(d->bio_split = bioset_create(4, offsetof(struct bbio, bio))) || !(d->unaligned_bvec = mempool_create_kmalloc_pool(1, sizeof(struct bio_vec) * BIO_MAX_PAGES)) || - bio_split_pool_init(&d->bio_split_hook)) - - return -ENOMEM; - - d->disk = alloc_disk(1); - if (!d->disk) + bio_split_pool_init(&d->bio_split_hook) || + !(d->disk = alloc_disk(1)) || + !(q = blk_alloc_queue(GFP_KERNEL))) return -ENOMEM; snprintf(d->disk->disk_name, DISK_NAME_LEN, "bcache%i", bcache_minor); @@ -771,10 +766,6 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size) d->disk->fops = &bcache_ops; d->disk->private_data = d; - q = blk_alloc_queue(GFP_KERNEL); - if (!q) - return -ENOMEM; - blk_queue_make_request(q, NULL); d->disk->queue = q; q->queuedata = d; @@ -999,14 +990,17 @@ static void cached_dev_free(struct closure *cl) mutex_lock(&bch_register_lock); - bd_unlink_disk_holder(dc->bdev, dc->disk.disk); + if (atomic_read(&dc->running)) + bd_unlink_disk_holder(dc->bdev, dc->disk.disk); bcache_device_free(&dc->disk); list_del(&dc->list); mutex_unlock(&bch_register_lock); if (!IS_ERR_OR_NULL(dc->bdev)) { - blk_sync_queue(bdev_get_queue(dc->bdev)); + if (dc->bdev->bd_disk) + blk_sync_queue(bdev_get_queue(dc->bdev)); + blkdev_put(dc->bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); } @@ -1028,73 +1022,67 @@ static void cached_dev_flush(struct closure *cl) static int cached_dev_init(struct cached_dev *dc, unsigned block_size) { - int err; + int ret; struct io *io; - - closure_init(&dc->disk.cl, NULL); - set_closure_fn(&dc->disk.cl, cached_dev_flush, system_wq); + struct request_queue *q = bdev_get_queue(dc->bdev); __module_get(THIS_MODULE); INIT_LIST_HEAD(&dc->list); + closure_init(&dc->disk.cl, NULL); + set_closure_fn(&dc->disk.cl, cached_dev_flush, system_wq); kobject_init(&dc->disk.kobj, &bch_cached_dev_ktype); - - bch_cache_accounting_init(&dc->accounting, &dc->disk.cl); - - err = bcache_device_init(&dc->disk, block_size); - if (err) - goto err; - - spin_lock_init(&dc->io_lock); - closure_init_unlocked(&dc->sb_write); INIT_WORK(&dc->detach, cached_dev_detach_finish); + closure_init_unlocked(&dc->sb_write); + INIT_LIST_HEAD(&dc->io_lru); + spin_lock_init(&dc->io_lock); + bch_cache_accounting_init(&dc->accounting, &dc->disk.cl); dc->sequential_merge = true; dc->sequential_cutoff = 4 << 20; - INIT_LIST_HEAD(&dc->io_lru); - dc->sb_bio.bi_max_vecs = 1; - dc->sb_bio.bi_io_vec = dc->sb_bio.bi_inline_vecs; - for (io = dc->io; io < dc->io + RECENT_IO; io++) { list_add(&io->lru, &dc->io_lru); hlist_add_head(&io->hash, dc->io_hash + RECENT_IO); } - bch_writeback_init_cached_dev(dc); + ret = bcache_device_init(&dc->disk, block_size); + if (ret) + return ret; + + set_capacity(dc->disk.disk, + dc->bdev->bd_part->nr_sects - dc->sb.data_offset); + + dc->disk.disk->queue->backing_dev_info.ra_pages = + max(dc->disk.disk->queue->backing_dev_info.ra_pages, + q->backing_dev_info.ra_pages); + + bch_cached_dev_request_init(dc); + bch_cached_dev_writeback_init(dc); return 0; -err: - bcache_device_stop(&dc->disk); - return err; } /* Cached device - bcache superblock */ -static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, +static void register_bdev(struct cache_sb *sb, struct page *sb_page, struct block_device *bdev, struct cached_dev *dc) { char name[BDEVNAME_SIZE]; const char *err = "cannot allocate memory"; - struct gendisk *g; struct cache_set *c; - if (!dc || cached_dev_init(dc, sb->block_size << 9) != 0) - return err; - memcpy(&dc->sb, sb, sizeof(struct cache_sb)); - dc->sb_bio.bi_io_vec[0].bv_page = sb_page; dc->bdev = bdev; dc->bdev->bd_holder = dc; - g = dc->disk.disk; - - set_capacity(g, dc->bdev->bd_part->nr_sects - dc->sb.data_offset); - - g->queue->backing_dev_info.ra_pages = - max(g->queue->backing_dev_info.ra_pages, - bdev->bd_queue->backing_dev_info.ra_pages); + bio_init(&dc->sb_bio); + dc->sb_bio.bi_max_vecs = 1; + dc->sb_bio.bi_io_vec = dc->sb_bio.bi_inline_vecs; + dc->sb_bio.bi_io_vec[0].bv_page = sb_page; + get_page(sb_page); - bch_cached_dev_request_init(dc); + if (cached_dev_init(dc, sb->block_size << 9)) + goto err; err = "error creating kobject"; if (kobject_add(&dc->disk.kobj, &part_to_dev(bdev->bd_part)->kobj, @@ -1103,6 +1091,8 @@ static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, if (bch_cache_accounting_add_kobjs(&dc->accounting, &dc->disk.kobj)) goto err; + pr_info("registered backing device %s", bdevname(bdev, name)); + list_add(&dc->list, &uncached_devices); list_for_each_entry(c, &bch_cache_sets, list) bch_cached_dev_attach(dc, c); @@ -1111,15 +1101,10 @@ static const char *register_bdev(struct cache_sb *sb, struct page *sb_page, BDEV_STATE(&dc->sb) == BDEV_STATE_STALE) bch_cached_dev_run(dc); - return NULL; + return; err: - kobject_put(&dc->disk.kobj); pr_notice("error opening %s: %s", bdevname(bdev, name), err); - /* - * Return NULL instead of an error because kobject_put() cleans - * everything up - */ - return NULL; + bcache_device_stop(&dc->disk); } /* Flash only volumes */ @@ -1717,20 +1702,11 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) size_t free; struct bucket *b; - if (!ca) - return -ENOMEM; - __module_get(THIS_MODULE); kobject_init(&ca->kobj, &bch_cache_ktype); - memcpy(&ca->sb, sb, sizeof(struct cache_sb)); - INIT_LIST_HEAD(&ca->discards); - bio_init(&ca->sb_bio); - ca->sb_bio.bi_max_vecs = 1; - ca->sb_bio.bi_io_vec = ca->sb_bio.bi_inline_vecs; - bio_init(&ca->journal.bio); ca->journal.bio.bi_max_vecs = 8; ca->journal.bio.bi_io_vec = ca->journal.bio.bi_inline_vecs; @@ -1742,18 +1718,17 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) !init_fifo(&ca->free_inc, free << 2, GFP_KERNEL) || !init_fifo(&ca->unused, free << 2, GFP_KERNEL) || !init_heap(&ca->heap, free << 3, GFP_KERNEL) || - !(ca->buckets = vmalloc(sizeof(struct bucket) * + !(ca->buckets = vzalloc(sizeof(struct bucket) * ca->sb.nbuckets)) || !(ca->prio_buckets = kzalloc(sizeof(uint64_t) * prio_buckets(ca) * 2, GFP_KERNEL)) || !(ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca)) || !(ca->alloc_workqueue = alloc_workqueue("bch_allocator", 0, 1)) || bio_split_pool_init(&ca->bio_split_hook)) - goto err; + return -ENOMEM; ca->prio_last_buckets = ca->prio_buckets + prio_buckets(ca); - memset(ca->buckets, 0, ca->sb.nbuckets * sizeof(struct bucket)); for_each_bucket(b, ca) atomic_set(&b->pin, 0); @@ -1766,22 +1741,28 @@ err: return -ENOMEM; } -static const char *register_cache(struct cache_sb *sb, struct page *sb_page, +static void register_cache(struct cache_sb *sb, struct page *sb_page, struct block_device *bdev, struct cache *ca) { char name[BDEVNAME_SIZE]; const char *err = "cannot allocate memory"; - if (cache_alloc(sb, ca) != 0) - return err; - - ca->sb_bio.bi_io_vec[0].bv_page = sb_page; + memcpy(&ca->sb, sb, sizeof(struct cache_sb)); ca->bdev = bdev; ca->bdev->bd_holder = ca; + bio_init(&ca->sb_bio); + ca->sb_bio.bi_max_vecs = 1; + ca->sb_bio.bi_io_vec = ca->sb_bio.bi_inline_vecs; + ca->sb_bio.bi_io_vec[0].bv_page = sb_page; + get_page(sb_page); + if (blk_queue_discard(bdev_get_queue(ca->bdev))) ca->discard = CACHE_DISCARD(&ca->sb); + if (cache_alloc(sb, ca) != 0) + goto err; + err = "error creating kobject"; if (kobject_add(&ca->kobj, &part_to_dev(bdev->bd_part)->kobj, "bcache")) goto err; @@ -1791,15 +1772,10 @@ static const char *register_cache(struct cache_sb *sb, struct page *sb_page, goto err; pr_info("registered cache device %s", bdevname(bdev, name)); - - return NULL; + return; err: + pr_notice("error opening %s: %s", bdevname(bdev, name), err); kobject_put(&ca->kobj); - pr_info("error opening %s: %s", bdevname(bdev, name), err); - /* Return NULL instead of an error because kobject_put() cleans - * everything up - */ - return NULL; } /* Global interfaces/init */ @@ -1833,12 +1809,15 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr, bdev = blkdev_get_by_path(strim(path), FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb); - if (bdev == ERR_PTR(-EBUSY)) - err = "device busy"; - - if (IS_ERR(bdev) || - set_blocksize(bdev, 4096)) + if (IS_ERR(bdev)) { + if (bdev == ERR_PTR(-EBUSY)) + err = "device busy"; goto err; + } + + err = "failed to set blocksize"; + if (set_blocksize(bdev, 4096)) + goto err_close; err = read_super(sb, bdev, &sb_page); if (err) @@ -1846,33 +1825,33 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr, if (SB_IS_BDEV(sb)) { struct cached_dev *dc = kzalloc(sizeof(*dc), GFP_KERNEL); + if (!dc) + goto err_close; - err = register_bdev(sb, sb_page, bdev, dc); + register_bdev(sb, sb_page, bdev, dc); } else { struct cache *ca = kzalloc(sizeof(*ca), GFP_KERNEL); + if (!ca) + goto err_close; - err = register_cache(sb, sb_page, bdev, ca); + register_cache(sb, sb_page, bdev, ca); } - - if (err) { - /* register_(bdev|cache) will only return an error if they - * didn't get far enough to create the kobject - if they did, - * the kobject destructor will do this cleanup. - */ +out: + if (sb_page) put_page(sb_page); -err_close: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -err: - if (attr != &ksysfs_register_quiet) - pr_info("error opening %s: %s", path, err); - ret = -EINVAL; - } - kfree(sb); kfree(path); mutex_unlock(&bch_register_lock); module_put(THIS_MODULE); return ret; + +err_close: + blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); +err: + if (attr != &ksysfs_register_quiet) + pr_info("error opening %s: %s", path, err); + ret = -EINVAL; + goto out; } static int bcache_reboot(struct notifier_block *n, unsigned long code, void *x) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 93e7e31a4bd3..2714ed3991d1 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -375,7 +375,7 @@ err: refill_dirty(cl); } -void bch_writeback_init_cached_dev(struct cached_dev *dc) +void bch_cached_dev_writeback_init(struct cached_dev *dc) { closure_init_unlocked(&dc->writeback); init_rwsem(&dc->writeback_lock); diff --git a/drivers/md/md.c b/drivers/md/md.c index 681d1099a2d5..9b82377a833b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5268,8 +5268,8 @@ static void md_clean(struct mddev *mddev) static void __md_stop_writes(struct mddev *mddev) { + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); if (mddev->sync_thread) { - set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_reap_sync_thread(mddev); } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 55951182af73..6e17f8181c4b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -417,7 +417,17 @@ static void raid1_end_write_request(struct bio *bio, int error) r1_bio->bios[mirror] = NULL; to_put = bio; - set_bit(R1BIO_Uptodate, &r1_bio->state); + /* + * Do not set R1BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) && + !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)) + set_bit(R1BIO_Uptodate, &r1_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(conf->mirrors[mirror].rdev, @@ -870,17 +880,17 @@ static void allow_barrier(struct r1conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r1conf *conf) +static void freeze_array(struct r1conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quite. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -888,7 +898,7 @@ static void freeze_array(struct r1conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); spin_unlock_irq(&conf->resync_lock); @@ -1544,8 +1554,8 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -1595,11 +1605,11 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) */ struct md_rdev *repl = conf->mirrors[conf->raid_disks + number].rdev; - raise_barrier(conf); + freeze_array(conf, 0); clear_bit(Replacement, &repl->flags); p->rdev = repl; conf->mirrors[conf->raid_disks + number].rdev = NULL; - lower_barrier(conf); + unfreeze_array(conf); clear_bit(WantReplacement, &rdev->flags); } else clear_bit(WantReplacement, &rdev->flags); @@ -2195,7 +2205,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * frozen */ if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); @@ -2780,8 +2790,8 @@ static int run(struct mddev *mddev) return PTR_ERR(conf); if (mddev->queue) - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { if (!mddev->gendisk) continue; @@ -2963,7 +2973,7 @@ static int raid1_reshape(struct mddev *mddev) return -ENOMEM; } - raise_barrier(conf); + freeze_array(conf, 0); /* ok, everything is stopped */ oldpool = conf->r1bio_pool; @@ -2994,7 +3004,7 @@ static int raid1_reshape(struct mddev *mddev) conf->raid_disks = mddev->raid_disks = raid_disks; mddev->delta_disks = 0; - lower_barrier(conf); + unfreeze_array(conf); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 59d4daa5f4c7..6ddae2501b9a 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -490,7 +490,17 @@ static void raid10_end_write_request(struct bio *bio, int error) sector_t first_bad; int bad_sectors; - set_bit(R10BIO_Uptodate, &r10_bio->state); + /* + * Do not set R10BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) + set_bit(R10BIO_Uptodate, &r10_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(rdev, @@ -1055,17 +1065,17 @@ static void allow_barrier(struct r10conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r10conf *conf) +static void freeze_array(struct r10conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quiet. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -1073,7 +1083,7 @@ static void freeze_array(struct r10conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); @@ -1837,8 +1847,8 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf, 0); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -2612,7 +2622,7 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio) r10_bio->devs[slot].bio = NULL; if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, mddev, r10_bio); unfreeze_array(conf); } else @@ -3609,8 +3619,7 @@ static int run(struct mddev *mddev) if (mddev->queue) { blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); blk_queue_io_min(mddev->queue, chunk_size); if (conf->geo.raid_disks % conf->geo.near_copies) blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9359828ffe26..05e4a105b9c7 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |= REQ_FLUSH; + bi->bi_vcnt = 1; bi->bi_io_vec[0].bv_len = STRIPE_SIZE; bi->bi_io_vec[0].bv_offset = 0; bi->bi_size = STRIPE_SIZE; @@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt = 1; rbi->bi_io_vec[0].bv_len = STRIPE_SIZE; rbi->bi_io_vec[0].bv_offset = 0; rbi->bi_size = STRIPE_SIZE; @@ -5464,7 +5466,7 @@ static int run(struct mddev *mddev) if (mddev->major_version == 0 && mddev->minor_version > 90) rdev->recovery_offset = reshape_offset; - + if (rdev->recovery_offset < reshape_offset) { /* We need to check old and new layout */ if (!only_parity(rdev->raid_disk, @@ -5587,6 +5589,8 @@ static int run(struct mddev *mddev) */ mddev->queue->limits.discard_zeroes_data = 0; + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 713d89fedc46..f580d30bb784 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -197,6 +197,8 @@ void mei_stop(struct mei_device *dev) { dev_dbg(&dev->pdev->dev, "stopping the device.\n"); + flush_scheduled_work(); + mutex_lock(&dev->device_lock); cancel_delayed_work(&dev->timer_work); @@ -210,8 +212,6 @@ void mei_stop(struct mei_device *dev) mutex_unlock(&dev->device_lock); - flush_scheduled_work(); - mei_watchdog_unregister(dev); } EXPORT_SYMBOL_GPL(mei_stop); diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c index 3adf8a70f26e..d0c6907dfd92 100644 --- a/drivers/misc/mei/nfc.c +++ b/drivers/misc/mei/nfc.c @@ -142,6 +142,8 @@ static void mei_nfc_free(struct mei_nfc_dev *ndev) mei_cl_unlink(ndev->cl_info); kfree(ndev->cl_info); } + + memset(ndev, 0, sizeof(struct mei_nfc_dev)); } static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev) diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index a727464e9c3f..0f268329bd3a 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -325,6 +325,7 @@ static int mei_me_pci_resume(struct device *device) mutex_lock(&dev->device_lock); dev->dev_state = MEI_DEV_POWER_UP; + mei_clear_interrupts(dev); mei_reset(dev, 1); mutex_unlock(&dev->device_lock); diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 44d273c5e19d..0535d1e0bc78 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -172,6 +172,7 @@ static long gru_get_config_info(unsigned long arg) nodesperblade = 2; else nodesperblade = 1; + memset(&info, 0, sizeof(info)); info.cpus = num_online_cpus(); info.nodes = num_online_nodes(); info.blades = info.nodes / nodesperblade; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 29b846cbfb48..02d9ae7d527e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -764,8 +764,8 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) struct net_device *bond_dev, *vlan_dev, *upper_dev; struct vlan_entry *vlan; - rcu_read_lock(); read_lock(&bond->lock); + rcu_read_lock(); bond_dev = bond->dev; @@ -787,12 +787,19 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) if (vlan_dev) __bond_resend_igmp_join_requests(vlan_dev); } + rcu_read_unlock(); - if (--bond->igmp_retrans > 0) + /* We use curr_slave_lock to protect against concurrent access to + * igmp_retrans from multiple running instances of this function and + * bond_change_active_slave + */ + write_lock_bh(&bond->curr_slave_lock); + if (bond->igmp_retrans > 1) { + bond->igmp_retrans--; queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); - + } + write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); - rcu_read_unlock(); } static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) @@ -1957,6 +1964,10 @@ err_free: err_undo_flags: bond_compute_features(bond); + /* Enslave of first slave has failed and we need to fix master's mac */ + if (bond->slave_cnt == 0 && + ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr)) + eth_hw_addr_random(bond_dev); return res; } diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 2baec24388b1..f989e1529a29 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -225,7 +225,7 @@ struct bonding { rwlock_t curr_slave_lock; u8 send_peer_notif; s8 setup_by_slave; - s8 igmp_retrans; + u8 igmp_retrans; #ifdef CONFIG_PROC_FS struct proc_dir_entry *proc_entry; char proc_file_name[IFNAMSIZ]; diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 0f493c8dc28b..c777b9013164 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; + if (tg3_flag(tp, NO_FWARE_REPORTED)) + return 0; + if (tg3_flag(tp, IS_SSB_CORE)) { /* We don't use firmware. */ return 0; @@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) */ static int tg3_init_hw(struct tg3 *tp, bool reset_phy) { + /* Chip may have been just powered on. If so, the boot code may still + * be running initialization. Wait for it to finish to avoid races in + * accessing the hardware. + */ + tg3_enable_register_access(tp); + tg3_poll_fw(tp); + tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c index 28a5e425fecf..92306b320840 100644 --- a/drivers/net/ethernet/dec/tulip/interrupt.c +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev) mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&tp->pdev->dev, mapping)) { + dev_kfree_skb(skb); + tp->rx_buffers[entry].skb = NULL; + break; + } + tp->rx_buffers[entry].mapping = mapping; tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 8bc1b21b1c79..a0b4be51f0d1 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) netdev->features |= NETIF_F_HIGHDMA; } else { status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (!status) + status = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev; diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 42e9dd05c936..5e3982fc5398 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) { - pr_err("Device reset fail\n"); + if (cnt <= 0) { + pr_err("Device reset failed\n"); ret = -ETIMEDOUT; } return ret; @@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740) - desc_status >>= 16; -#endif - if (--boguscnt < 0) break; if (!(desc_status & RDFEND)) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740) + /* + * In case of almost all GETHER/ETHERs, the Receive Frame State + * (RFS) bits in the Receive Descriptor 0 are from bit 9 to + * bit 0. However, in case of the R8A7740's GETHER, the RFS + * bits are from bit 25 to bit 16. So, the driver needs right + * shifting by 16. + */ + desc_status >>= 16; +#endif + if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 | RD_RFS5 | RD_RFS6 | RD_RFS10)) { ndev->stats.rx_errors++; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 618446ae1ec1..ee919ca8b8a0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef STMMAC_XMIT_DEBUG if (netif_msg_pktdata(priv)) { - pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d" + pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d", __func__, (priv->cur_tx % txsize), (priv->dirty_tx % txsize), entry, first, nfrags); if (priv->extend_desc) diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 12aec173564c..c47f0dbcebb5 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev) __raw_writel(ctrl, &data->regs->control); wait_for_idle(data); - pm_runtime_put_sync(data->dev); - data->suspended = true; spin_unlock(&data->lock); + pm_runtime_put_sync(data->dev); return 0; } @@ -460,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev) static int davinci_mdio_resume(struct device *dev) { struct davinci_mdio_data *data = dev_get_drvdata(dev); - u32 ctrl; - spin_lock(&data->lock); pm_runtime_get_sync(data->dev); + spin_lock(&data->lock); /* restart the scan state machine */ - ctrl = __raw_readl(&data->regs->control); - ctrl |= CONTROL_ENABLE; - __raw_writel(ctrl, &data->regs->control); + __davinci_mdio_reset(data); data->suspended = false; spin_unlock(&data->lock); @@ -477,8 +473,8 @@ static int davinci_mdio_resume(struct device *dev) } static const struct dev_pm_ops davinci_mdio_pm_ops = { - .suspend = davinci_mdio_suspend, - .resume = davinci_mdio_resume, + .suspend_late = davinci_mdio_suspend, + .resume_early = davinci_mdio_resume, }; static const struct of_device_id davinci_mdio_of_mtable[] = { diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 1c502bb0c916..6e91931a1c2c 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -853,18 +853,24 @@ static int macvlan_changelink(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct macvlan_dev *vlan = netdev_priv(dev); - if (data && data[IFLA_MACVLAN_MODE]) - vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); + if (data && data[IFLA_MACVLAN_FLAGS]) { __u16 flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); bool promisc = (flags ^ vlan->flags) & MACVLAN_FLAG_NOPROMISC; - - if (promisc && (flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, -1); - else if (promisc && !(flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, 1); + if (vlan->port->passthru && promisc) { + int err; + + if (flags & MACVLAN_FLAG_NOPROMISC) + err = dev_set_promiscuity(vlan->lowerdev, -1); + else + err = dev_set_promiscuity(vlan->lowerdev, 1); + if (err < 0) + return err; + } vlan->flags = flags; } + if (data && data[IFLA_MACVLAN_MODE]) + vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); return 0; } diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index d016a76ad44b..b3051052f3ad 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1092,8 +1092,8 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } port->index = -1; - team_port_enable(team, port); list_add_tail_rcu(&port->list, &team->port_list); + team_port_enable(team, port); __team_compute_features(team); __team_port_change_port_added(port, !!netif_carrier_ok(port_dev)); __team_options_change_check(team); diff --git a/drivers/net/team/team_mode_random.c b/drivers/net/team/team_mode_random.c index 5ca14d463ba7..7f032e211343 100644 --- a/drivers/net/team/team_mode_random.c +++ b/drivers/net/team/team_mode_random.c @@ -28,6 +28,8 @@ static bool rnd_transmit(struct team *team, struct sk_buff *skb) port_index = random_N(team->en_port_count); port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; diff --git a/drivers/net/team/team_mode_roundrobin.c b/drivers/net/team/team_mode_roundrobin.c index d268e4de781b..472623f8ce3d 100644 --- a/drivers/net/team/team_mode_roundrobin.c +++ b/drivers/net/team/team_mode_roundrobin.c @@ -32,6 +32,8 @@ static bool rr_transmit(struct team *team, struct sk_buff *skb) port_index = rr_priv(team)->sent_packets++ % team->en_port_count; port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 89776c592151..bfa9bb48e42d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -352,7 +352,7 @@ static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb) u32 numqueues = 0; rcu_read_lock(); - numqueues = tun->numqueues; + numqueues = ACCESS_ONCE(tun->numqueues); txq = skb_get_rxhash(skb); if (txq) { @@ -2159,6 +2159,8 @@ static int tun_chr_open(struct inode *inode, struct file * file) set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags); INIT_LIST_HEAD(&tfile->next); + sock_set_flag(&tfile->sk, SOCK_ZEROCOPY); + return 0; } diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 078795fe6e31..04ee044dde51 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -627,6 +627,12 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Huawei E1820 - handled by qmi_wwan */ +{ + USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1), + .driver_info = 0, +}, + /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */ #if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) { diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 86adfa0a912e..d095d0d3056b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -519,6 +519,7 @@ static const struct usb_device_id products[] = { /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ + {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index f3dc124c60c7..3c2cbc9d6295 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG This option enables collection of statistics for Rx/Tx status data and some other MAC related statistics -config ATH9K_RATE_CONTROL +config ATH9K_LEGACY_RATE_CONTROL bool "Atheros ath9k rate control" depends on ATH9K - default y + default n ---help--- Say Y, if you want to use the ath9k specific rate control - module instead of minstrel_ht. + module instead of minstrel_ht. Be warned that there are various + issues with the ath9k RC and minstrel is a more robust algorithm. + Note that even if this option is selected, "ath9k_rate_control" + has to be passed to mac80211 using the module parameter, + ieee80211_default_rc_algo. config ATH9K_HTC tristate "Atheros HTC based wireless cards support" diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 2ad8f9474ba1..75ee9e7704ce 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -8,7 +8,7 @@ ath9k-y += beacon.o \ antenna.o ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o -ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o +ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o ath9k-$(CONFIG_ATH9K_PCI) += pci.o ath9k-$(CONFIG_ATH9K_AHB) += ahb.o ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index db5ffada2217..7546b9a7dcbf 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = { {0x0000a074, 0x00000000}, {0x0000a078, 0x00000000}, {0x0000a07c, 0x00000000}, - {0x0000a080, 0x1a1a1a1a}, - {0x0000a084, 0x1a1a1a1a}, - {0x0000a088, 0x1a1a1a1a}, - {0x0000a08c, 0x1a1a1a1a}, - {0x0000a090, 0x171a1a1a}, + {0x0000a080, 0x22222229}, + {0x0000a084, 0x1d1d1d1d}, + {0x0000a088, 0x1d1d1d1d}, + {0x0000a08c, 0x1d1d1d1d}, + {0x0000a090, 0x171d1d1d}, {0x0000a094, 0x11111717}, {0x0000a098, 0x00030311}, {0x0000a09c, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index aba415103f94..2ba494567777 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->iface_combinations = if_comb; hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb); - if (AR_SREV_5416(sc->sc_ah)) - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; @@ -830,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) sc->ant_rx = hw->wiphy->available_antennas_rx; sc->ant_tx = hw->wiphy->available_antennas_tx; -#ifdef CONFIG_ATH9K_RATE_CONTROL - hw->rate_control_algorithm = "ath9k_rate_control"; -#endif - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &sc->sbands[IEEE80211_BAND_2GHZ]; diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h index 267dbfcfaa96..b9a87383cb43 100644 --- a/drivers/net/wireless/ath/ath9k/rc.h +++ b/drivers/net/wireless/ath/ath9k/rc.h @@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix, } #endif -#ifdef CONFIG_ATH9K_RATE_CONTROL +#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL int ath_rate_control_register(void); void ath_rate_control_unregister(void); #else diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6dd07e2ec595..a95b77ab360e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work) for (i = 0; i < B43_NR_FWTYPES; i++) { errmsg = ctx->errors[i]; if (strlen(errmsg)) - b43err(dev->wl, errmsg); + b43err(dev->wl, "%s", errmsg); } b43_print_fw_helptext(dev->wl, 1); goto out; diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index f8246f2d88f9..4caaf52986a4 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval); __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, u32 beacon_interval); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops il_pm_ops; #define IL_LEGACY_PM_OPS (&il_pm_ops) -#else /* !CONFIG_PM */ +#else /* !CONFIG_PM_SLEEP */ #define IL_LEGACY_PM_OPS NULL -#endif /* !CONFIG_PM */ +#endif /* !CONFIG_PM_SLEEP */ /***************************************************** * Error Handling Debugging diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index 753b5682d53f..a5f9875cfd6e 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -26,10 +26,17 @@ static struct dentry *mwifiex_dfs_dir; static char *bss_modes[] = { - "Unknown", - "Ad-hoc", - "Managed", - "Auto" + "UNSPECIFIED", + "ADHOC", + "STATION", + "AP", + "AP_VLAN", + "WDS", + "MONITOR", + "MESH_POINT", + "P2P_CLIENT", + "P2P_GO", + "P2P_DEVICE", }; /* size/addr for mwifiex_debug_info */ @@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf, p += sprintf(p, "driver_version = %s", fmt); p += sprintf(p, "\nverext = %s", priv->version_str); p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); - p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + + if (info.bss_mode >= ARRAY_SIZE(bss_modes)) + p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); + else + p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + p += sprintf(p, "media_state=\"%s\"\n", (!priv->media_connected ? "Disconnected" : "Connected")); p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 999ffc12578b..c97e9d327331 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) "can't alloc skb for rx\n"); goto done; } + kmemleak_not_leak(new_skb); pci_unmap_single(rtlpci->pdev, *((dma_addr_t *) skb->cb), diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 3d0498e69c8c..189ba124a8c6 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) } } -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level) +static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_value = (u32) mac->basic_rates; - u8 *mcsrate = mac->mcs; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; u8 ratr_index = 0; u8 nmode = mac->ht_enable; - u8 mimo_ps = 1; - u16 shortgi_rate = 0; - u32 tmp_ratr_value = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate; + u32 tmp_ratr_value; u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; enum wireless_mode wirelessmode = mac->mode; - ratr_value |= ((*(u16 *) (mcsrate))) << 12; + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_value = 0xfff; + + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: if (ratr_value & 0x0000000c) @@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: nmode = 1; - if (mimo_ps == 0) { + if (mimo_ps == IEEE80211_SMPS_STATIC) { ratr_value &= 0x0007F005; } else { u32 ratr_mask; @@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_mask = 0x000ff005; else ratr_mask = 0x0f0ff005; - if (curtxbw_40mhz) - ratr_mask |= 0x00000010; + ratr_value &= ratr_mask; } break; @@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_value &= 0x000ff0ff; else ratr_value &= 0x0f0ff0ff; + break; } + ratr_value &= 0x0FFFFFFF; - if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || - (!curtxbw_40mhz && curshortgi_20mhz))) { + + if (nmode && ((curtxbw_40mhz && + curshortgi_40mhz) || (!curtxbw_40mhz && + curshortgi_20mhz))) { + ratr_value |= 0x10000000; tmp_ratr_value = (ratr_value >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { if ((1 << shortgi_rate) & tmp_ratr_value) break; } + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | - (shortgi_rate << 4) | (shortgi_rate); + (shortgi_rate << 4) | (shortgi_rate); } + rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", + rtl_read_dword(rtlpriv, REG_ARFR0)); } -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) +static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_bitmap = (u32) mac->basic_rates; - u8 *p_mcsrate = mac->mcs; - u8 ratr_index = 0; - u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; - enum wireless_mode wirelessmode = mac->mode; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; bool shortgi = false; u8 rate_mask[5]; u8 macid = 0; - u8 mimops = 1; - - ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12); + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_bitmap = 0xfff; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: ratr_index = RATR_INX_WIRELESS_B; @@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; case WIRELESS_MODE_G: ratr_index = RATR_INX_WIRELESS_GB; + if (rssi_level == 1) ratr_bitmap &= 0x00000f00; else if (rssi_level == 2) @@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: ratr_index = RATR_INX_WIRELESS_NGB; - if (mimops == 0) { + + if (mimo_ps == IEEE80211_SMPS_STATIC) { if (rssi_level == 1) ratr_bitmap &= 0x00070000; else if (rssi_level == 2) @@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) } } } + if ((curtxbw_40mhz && curshortgi_40mhz) || (!curtxbw_40mhz && curshortgi_20mhz)) { + if (macid == 0) shortgi = true; else if (macid == 1) @@ -2138,21 +2183,42 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; default: ratr_index = RATR_INX_WIRELESS_NGB; + if (rtlphy->rf_type == RF_1T2R) ratr_bitmap &= 0x000ff0ff; else ratr_bitmap &= 0x0f0ff0ff; break; } - RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n", - ratr_bitmap); - *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) | - ratr_index << 28); + sta_entry->ratr_index = ratr_index; + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + "ratr_bitmap :%x\n", ratr_bitmap); + *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) | + (ratr_index << 28); rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80; RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "Rate_index:%x, ratr_val:%x, %5phC\n", ratr_index, ratr_bitmap, rate_mask); - rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask); + memcpy(rtlpriv->rate_mask, rate_mask, 5); + /* rtl92c_fill_h2c_cmd() does USB I/O and will result in a + * "scheduled while atomic" if called directly */ + schedule_work(&rtlpriv->works.fill_h2c_cmd); + + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92cu_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92cu_update_hal_rate_table(hw, sta); } void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h index f41a3aa4a26f..8e3ec1e25644 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h @@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw, u32 add_msr, u32 rm_msr); void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level); -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level); void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw); bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index 85b6bdb163c0..da4f587199ee 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index, macaddr = cam_const_broad; entry_id = key_index; } else { + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, COMP_SEC, + DBG_EMERG, + "Can not find free hw security cam entry\n"); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + key_index = PAIRWISE_KEYIDX; - entry_id = CAM_PAIRWISE_KEY_POSITION; is_pairwise = true; } } if (rtlpriv->sec.key_len[key_index] == 0) { RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "delete one entry\n"); + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + rtl_cam_del_entry(hw, p_macaddr); rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); } else { RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 938b1e670b93..826f085c29dd 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .update_interrupt_mask = rtl92cu_update_interrupt_mask, .get_hw_reg = rtl92cu_get_hw_reg, .set_hw_reg = rtl92cu_set_hw_reg, - .update_rate_tbl = rtl92cu_update_hal_rate_table, - .update_rate_mask = rtl92cu_update_hal_rate_mask, + .update_rate_tbl = rtl92cu_update_hal_rate_tbl, .fill_tx_desc = rtl92cu_tx_fill_desc, .fill_fake_txdesc = rtl92cu_fill_fake_txdesc, .fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc, @@ -137,6 +136,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .phy_lc_calibrate = _rtl92cu_phy_lc_calibrate, .phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback, .dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower, + .fill_h2c_cmd = rtl92c_fill_h2c_cmd, }; static struct rtl_mod_params rtl92cu_mod_params = { diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h index a1310abd0d54..262e1e4c6e5b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h @@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, u32 regaddr, u32 bitmask); void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw); +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level); #endif diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 76732b0cd221..a3532e077871 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -824,6 +824,7 @@ static void rtl_usb_stop(struct ieee80211_hw *hw) /* should after adapter start and interrupt enable. */ set_hal_stop(rtlhal); + cancel_work_sync(&rtlpriv->works.fill_h2c_cmd); /* Enable software */ SET_USB_STOP(rtlusb); rtl_usb_deinit(hw); @@ -1026,6 +1027,16 @@ static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, return false; } +static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work) +{ + struct rtl_works *rtlworks = + container_of(work, struct rtl_works, fill_h2c_cmd); + struct ieee80211_hw *hw = rtlworks->hw; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask); +} + static struct rtl_intf_ops rtl_usb_ops = { .adapter_start = rtl_usb_start, .adapter_stop = rtl_usb_stop, @@ -1057,6 +1068,8 @@ int rtl_usb_probe(struct usb_interface *intf, /* this spin lock must be initialized early */ spin_lock_init(&rtlpriv->locks.usb_lock); + INIT_WORK(&rtlpriv->works.fill_h2c_cmd, + rtl_fill_h2c_cmd_work_callback); rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 44328baa6389..cc03e7c87cbe 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1736,6 +1736,8 @@ struct rtl_hal_ops { void (*bt_wifi_media_status_notify) (struct ieee80211_hw *hw, bool mstate); void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw); + void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id, + u32 cmd_len, u8 *p_cmdbuffer); }; struct rtl_intf_ops { @@ -1869,6 +1871,7 @@ struct rtl_works { struct delayed_work fwevt_wq; struct work_struct lps_change_work; + struct work_struct fill_h2c_cmd; }; struct rtl_debug { @@ -2048,6 +2051,7 @@ struct rtl_priv { }; }; bool enter_ps; /* true when entering PS */ + u8 rate_mask[5]; /*This must be the last item so that it points to the data allocated diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c index affdb3ec6225..4a0bbb13806b 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.c +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -310,7 +310,7 @@ static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 222d03540200..9e5484a73667 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -36,12 +36,12 @@ #define WL127X_IFTYPE_SR_VER 3 #define WL127X_MAJOR_SR_VER 10 #define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_SR_VER 115 +#define WL127X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl127x */ #define WL127X_IFTYPE_MR_VER 5 #define WL127X_MAJOR_MR_VER 7 #define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_MR_VER 115 +#define WL127X_MINOR_MR_VER 42 /* FW chip version for wl128x */ #define WL128X_CHIP_VER 7 @@ -49,7 +49,7 @@ #define WL128X_IFTYPE_SR_VER 3 #define WL128X_MAJOR_SR_VER 10 #define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL128X_MINOR_SR_VER 115 +#define WL128X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl128x */ #define WL128X_IFTYPE_MR_VER 5 #define WL128X_MAJOR_MR_VER 7 diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index 09d944505ac0..2b642f8c9266 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -34,7 +34,7 @@ static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 37984e6d4e99..8c20935d72c9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -662,7 +662,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) { struct xenvif *vif = NULL, *tmp; s8 status; - u16 irq, flags; + u16 flags; struct xen_netif_rx_response *resp; struct sk_buff_head rxq; struct sk_buff *skb; @@ -771,13 +771,13 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) sco->meta_slots_used); RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&vif->rx, ret); - irq = vif->irq; - if (ret && list_empty(&vif->notify_list)) - list_add_tail(&vif->notify_list, ¬ify); xenvif_notify_tx_completion(vif); - xenvif_put(vif); + if (ret && list_empty(&vif->notify_list)) + list_add_tail(&vif->notify_list, ¬ify); + else + xenvif_put(vif); npo.meta_cons += sco->meta_slots_used; dev_kfree_skb(skb); } @@ -785,6 +785,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) list_for_each_entry_safe(vif, tmp, ¬ify, notify_list) { notify_remote_via_irq(vif->irq); list_del_init(&vif->notify_list); + xenvif_put(vif); } /* More work to do? */ diff --git a/drivers/of/base.c b/drivers/of/base.c index f53b992f060a..a6f584a7f4a1 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -192,14 +192,15 @@ EXPORT_SYMBOL(of_find_property); struct device_node *of_find_all_nodes(struct device_node *prev) { struct device_node *np; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); np = prev ? prev->allnext : of_allnodes; for (; np != NULL; np = np->allnext) if (of_node_get(np)) break; of_node_put(prev); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return np; } EXPORT_SYMBOL(of_find_all_nodes); @@ -421,8 +422,9 @@ struct device_node *of_get_next_available_child(const struct device_node *node, struct device_node *prev) { struct device_node *next; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); next = prev ? prev->sibling : node->child; for (; next; next = next->sibling) { if (!__of_device_is_available(next)) @@ -431,7 +433,7 @@ struct device_node *of_get_next_available_child(const struct device_node *node, break; } of_node_put(prev); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return next; } EXPORT_SYMBOL(of_get_next_available_child); @@ -735,13 +737,14 @@ EXPORT_SYMBOL_GPL(of_modalias_node); struct device_node *of_find_node_by_phandle(phandle handle) { struct device_node *np; + unsigned long flags; - raw_spin_lock(&devtree_lock); + raw_spin_lock_irqsave(&devtree_lock, flags); for (np = of_allnodes; np; np = np->allnext) if (np->phandle == handle) break; of_node_get(np); - raw_spin_unlock(&devtree_lock); + raw_spin_unlock_irqrestore(&devtree_lock, flags); return np; } EXPORT_SYMBOL(of_find_node_by_phandle); diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 34281754b629..8a4f9c5c0b8e 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -2104,15 +2104,15 @@ static struct pinctrl_desc nmk_pinctrl_desc = { static const struct of_device_id nmk_pinctrl_match[] = { { - .compatible = "stericsson,nmk-pinctrl-stn8815", + .compatible = "stericsson,stn8815-pinctrl", .data = (void *)PINCTRL_NMK_STN8815, }, { - .compatible = "stericsson,nmk-pinctrl", + .compatible = "stericsson,db8500-pinctrl", .data = (void *)PINCTRL_NMK_DB8500, }, { - .compatible = "stericsson,nmk-pinctrl-db8540", + .compatible = "stericsson,db8540-pinctrl", .data = (void *)PINCTRL_NMK_DB8540, }, {}, diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index f6656b8c28b6..a19045ee0ec4 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -2901,7 +2901,7 @@ static struct of_regulator_match ab8500_regulator_match[] = { { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, }, { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, }, { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, - { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, }, { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, }, }; @@ -2917,7 +2917,7 @@ static struct of_regulator_match ab8505_regulator_match[] = { { .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, }, { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, }, { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, }, - { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, }, { .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, }, { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, }, }; @@ -2933,7 +2933,7 @@ static struct of_regulator_match ab8540_regulator_match[] = { { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8540_LDO_TVOUT, }, { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8540_LDO_AUDIO, }, { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8540_LDO_ANAMIC1, }, - { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, }, { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8540_LDO_DMIC, }, { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8540_LDO_ANA, }, { .name = "ab8500_ldo_sdio", .driver_data = (void *) AB8540_LDO_SDIO, }, @@ -2948,7 +2948,7 @@ static struct of_regulator_match ab9540_regulator_match[] = { { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, }, { .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, }, { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, }, - { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, }, { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, }, { .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, }, }; diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 0eab77b22340..f296f3f7db9b 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -25,6 +25,7 @@ #include <linux/rtc.h> #include <linux/bcd.h> #include <linux/interrupt.h> +#include <linux/spinlock.h> #include <linux/ioctl.h> #include <linux/completion.h> #include <linux/io.h> @@ -42,10 +43,65 @@ #define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */ +struct at91_rtc_config { + bool use_shadow_imr; +}; + +static const struct at91_rtc_config *at91_rtc_config; static DECLARE_COMPLETION(at91_rtc_updated); static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; static int irq; +static DEFINE_SPINLOCK(at91_rtc_lock); +static u32 at91_rtc_shadow_imr; + +static void at91_rtc_write_ier(u32 mask) +{ + unsigned long flags; + + spin_lock_irqsave(&at91_rtc_lock, flags); + at91_rtc_shadow_imr |= mask; + at91_rtc_write(AT91_RTC_IER, mask); + spin_unlock_irqrestore(&at91_rtc_lock, flags); +} + +static void at91_rtc_write_idr(u32 mask) +{ + unsigned long flags; + + spin_lock_irqsave(&at91_rtc_lock, flags); + at91_rtc_write(AT91_RTC_IDR, mask); + /* + * Register read back (of any RTC-register) needed to make sure + * IDR-register write has reached the peripheral before updating + * shadow mask. + * + * Note that there is still a possibility that the mask is updated + * before interrupts have actually been disabled in hardware. The only + * way to be certain would be to poll the IMR-register, which is is + * the very register we are trying to emulate. The register read back + * is a reasonable heuristic. + */ + at91_rtc_read(AT91_RTC_SR); + at91_rtc_shadow_imr &= ~mask; + spin_unlock_irqrestore(&at91_rtc_lock, flags); +} + +static u32 at91_rtc_read_imr(void) +{ + unsigned long flags; + u32 mask; + + if (at91_rtc_config->use_shadow_imr) { + spin_lock_irqsave(&at91_rtc_lock, flags); + mask = at91_rtc_shadow_imr; + spin_unlock_irqrestore(&at91_rtc_lock, flags); + } else { + mask = at91_rtc_read(AT91_RTC_IMR); + } + + return mask; +} /* * Decode time/date into rtc_time structure @@ -110,9 +166,9 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) cr = at91_rtc_read(AT91_RTC_CR); at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD); + at91_rtc_write_ier(AT91_RTC_ACKUPD); wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD); + at91_rtc_write_idr(AT91_RTC_ACKUPD); at91_rtc_write(AT91_RTC_TIMR, bin2bcd(tm->tm_sec) << 0 @@ -144,7 +200,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); tm->tm_year = at91_alarm_year - 1900; - alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM) + alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) ? 1 : 0; dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -169,7 +225,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) tm.tm_min = alrm->time.tm_min; tm.tm_sec = alrm->time.tm_sec; - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write_idr(AT91_RTC_ALARM); at91_rtc_write(AT91_RTC_TIMALR, bin2bcd(tm.tm_sec) << 0 | bin2bcd(tm.tm_min) << 8 @@ -182,7 +238,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) if (alrm->enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write_ier(AT91_RTC_ALARM); } dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -198,9 +254,9 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) if (enabled) { at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write_ier(AT91_RTC_ALARM); } else - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write_idr(AT91_RTC_ALARM); return 0; } @@ -209,7 +265,7 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) */ static int at91_rtc_proc(struct device *dev, struct seq_file *seq) { - unsigned long imr = at91_rtc_read(AT91_RTC_IMR); + unsigned long imr = at91_rtc_read_imr(); seq_printf(seq, "update_IRQ\t: %s\n", (imr & AT91_RTC_ACKUPD) ? "yes" : "no"); @@ -229,7 +285,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) unsigned int rtsr; unsigned long events = 0; - rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR); + rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr(); if (rtsr) { /* this interrupt is shared! Is it ours? */ if (rtsr & AT91_RTC_ALARM) events |= (RTC_AF | RTC_IRQF); @@ -250,6 +306,43 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) return IRQ_NONE; /* not handled */ } +static const struct at91_rtc_config at91rm9200_config = { +}; + +static const struct at91_rtc_config at91sam9x5_config = { + .use_shadow_imr = true, +}; + +#ifdef CONFIG_OF +static const struct of_device_id at91_rtc_dt_ids[] = { + { + .compatible = "atmel,at91rm9200-rtc", + .data = &at91rm9200_config, + }, { + .compatible = "atmel,at91sam9x5-rtc", + .data = &at91sam9x5_config, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); +#endif + +static const struct at91_rtc_config * +at91_rtc_get_config(struct platform_device *pdev) +{ + const struct of_device_id *match; + + if (pdev->dev.of_node) { + match = of_match_node(at91_rtc_dt_ids, pdev->dev.of_node); + if (!match) + return NULL; + return (const struct at91_rtc_config *)match->data; + } + + return &at91rm9200_config; +} + static const struct rtc_class_ops at91_rtc_ops = { .read_time = at91_rtc_readtime, .set_time = at91_rtc_settime, @@ -268,6 +361,10 @@ static int __init at91_rtc_probe(struct platform_device *pdev) struct resource *regs; int ret = 0; + at91_rtc_config = at91_rtc_get_config(pdev); + if (!at91_rtc_config) + return -ENODEV; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(&pdev->dev, "no mmio resource defined\n"); @@ -290,7 +387,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev) at91_rtc_write(AT91_RTC_MR, 0); /* 24 hour mode */ /* Disable all interrupts */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); @@ -335,7 +432,7 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) struct rtc_device *rtc = platform_get_drvdata(pdev); /* Disable all interrupts */ - at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); free_irq(irq, pdev); @@ -358,13 +455,13 @@ static int at91_rtc_suspend(struct device *dev) /* this IRQ is shared with DBGU and other hardware which isn't * necessarily doing PM like we are... */ - at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR) + at91_rtc_imr = at91_rtc_read_imr() & (AT91_RTC_ALARM|AT91_RTC_SECEV); if (at91_rtc_imr) { if (device_may_wakeup(dev)) enable_irq_wake(irq); else - at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr); + at91_rtc_write_idr(at91_rtc_imr); } return 0; } @@ -375,7 +472,7 @@ static int at91_rtc_resume(struct device *dev) if (device_may_wakeup(dev)) disable_irq_wake(irq); else - at91_rtc_write(AT91_RTC_IER, at91_rtc_imr); + at91_rtc_write_ier(at91_rtc_imr); } return 0; } @@ -383,12 +480,6 @@ static int at91_rtc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); -static const struct of_device_id at91_rtc_dt_ids[] = { - { .compatible = "atmel,at91rm9200-rtc" }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); - static struct platform_driver at91_rtc_driver = { .remove = __exit_p(at91_rtc_remove), .driver = { diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index cc5bea9c4b1c..f1cb706445c7 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -854,6 +854,9 @@ static int cmos_resume(struct device *dev) } spin_lock_irq(&rtc_lock); + if (device_may_wakeup(dev)) + hpet_rtc_timer_init(); + do { CMOS_WRITE(tmp, RTC_CONTROL); hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK); @@ -869,7 +872,6 @@ static int cmos_resume(struct device *dev) rtc_update_irq(cmos->rtc, 1, mask); tmp &= ~RTC_AIE; hpet_mask_rtc_irq_bit(RTC_AIE); - hpet_rtc_timer_init(); } while (mask & RTC_AIE); spin_unlock_irq(&rtc_lock); } diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c index 459c2ffc95a6..426901cef14f 100644 --- a/drivers/rtc/rtc-tps6586x.c +++ b/drivers/rtc/rtc-tps6586x.c @@ -273,6 +273,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) return ret; } + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, rtc); rtc->rtc = devm_rtc_device_register(&pdev->dev, dev_name(&pdev->dev), &tps6586x_rtc_ops, THIS_MODULE); @@ -292,7 +294,6 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) goto fail_rtc_register; } disable_irq(rtc->irq); - device_set_wakeup_capable(&pdev->dev, 1); return 0; fail_rtc_register: diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 8751a5240c99..b2eab34f38d9 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -524,6 +524,7 @@ static int twl_rtc_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rtc); + device_init_wakeup(&pdev->dev, 1); return 0; out2: diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 4ffa66c87ea5..9ca3996f65b2 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -2040,6 +2040,7 @@ static struct net_device *netiucv_init_netdevice(char *username, char *userdata) netiucv_setup_netdevice); if (!dev) return NULL; + rtnl_lock(); if (dev_alloc_name(dev, dev->name) < 0) goto out_netdev; @@ -2061,6 +2062,7 @@ static struct net_device *netiucv_init_netdevice(char *username, char *userdata) out_fsm: kfree_fsm(privptr->fsm); out_netdev: + rtnl_unlock(); free_netdev(dev); return NULL; } @@ -2100,6 +2102,7 @@ static ssize_t conn_write(struct device_driver *drv, rc = netiucv_register_device(dev); if (rc) { + rtnl_unlock(); IUCV_DBF_TEXT_(setup, 2, "ret %d from netiucv_register_device\n", rc); goto out_free_ndev; @@ -2109,7 +2112,8 @@ static ssize_t conn_write(struct device_driver *drv, priv = netdev_priv(dev); SET_NETDEV_DEV(dev, priv->dev); - rc = register_netdev(dev); + rc = register_netdevice(dev); + rtnl_unlock(); if (rc) goto out_unreg; diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 60cfae51c713..eab593eaaafa 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -89,7 +89,7 @@ static int hspi_status_check_timeout(struct hspi_priv *hspi, u32 mask, u32 val) if ((mask & hspi_read(hspi, SPSR)) == val) return 0; - msleep(20); + udelay(10); } dev_err(hspi->dev, "timeout\n"); diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 35f60bd252dd..637d728fbeb5 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1487,7 +1487,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev) return 0; err_spi_register_master: - free_irq(board_dat->pdev->irq, board_dat); + free_irq(board_dat->pdev->irq, data); err_request_irq: pch_spi_free_resources(board_dat, data); err_spi_get_resources: @@ -1667,6 +1667,7 @@ static int pch_spi_probe(struct pci_dev *pdev, pd_dev = platform_device_alloc("pch-spi", i); if (!pd_dev) { dev_err(&pdev->dev, "platform_device_alloc failed\n"); + retval = -ENOMEM; goto err_platform_device; } pd_dev_save->pd_save[i] = pd_dev; diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index e1d769607425..34d18dcfa0db 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -267,7 +267,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) { struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); u32 ipif_ier; - u16 cr; /* We get here with transmitter inhibited */ @@ -276,7 +275,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) xspi->remaining_bytes = t->len; INIT_COMPLETION(xspi->done); - xilinx_spi_fill_tx_fifo(xspi); /* Enable the transmit empty interrupt, which we use to determine * progress on the transmission. @@ -285,12 +283,41 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY, xspi->regs + XIPIF_V123B_IIER_OFFSET); - /* Start the transfer by not inhibiting the transmitter any longer */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & - ~XSPI_CR_TRANS_INHIBIT; - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + for (;;) { + u16 cr; + u8 sr; + + xilinx_spi_fill_tx_fifo(xspi); + + /* Start the transfer by not inhibiting the transmitter any + * longer + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & + ~XSPI_CR_TRANS_INHIBIT; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + wait_for_completion(&xspi->done); + + /* A transmit has just completed. Process received data and + * check for more data to transmit. Always inhibit the + * transmitter while the Isr refills the transmit register/FIFO, + * or make sure it is stopped if we're done. + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); + xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, + xspi->regs + XSPI_CR_OFFSET); + + /* Read out all the data from the Rx FIFO */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { + xspi->rx_fn(xspi); + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } - wait_for_completion(&xspi->done); + /* See if there is more data to send */ + if (!xspi->remaining_bytes > 0) + break; + } /* Disable the transmit empty interrupt */ xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET); @@ -314,38 +341,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET); if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */ - u16 cr; - u8 sr; - - /* A transmit has just completed. Process received data and - * check for more data to transmit. Always inhibit the - * transmitter while the Isr refills the transmit register/FIFO, - * or make sure it is stopped if we're done. - */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); - xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, - xspi->regs + XSPI_CR_OFFSET); - - /* Read out all the data from the Rx FIFO */ - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { - xspi->rx_fn(xspi); - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - } - - /* See if there is more data to send */ - if (xspi->remaining_bytes > 0) { - xilinx_spi_fill_tx_fifo(xspi); - /* Start the transfer by not inhibiting the - * transmitter any longer - */ - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - } else { - /* No more data to send. - * Indicate the transfer is completed. - */ - complete(&xspi->done); - } + complete(&xspi->done); } return IRQ_HANDLED; diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 4e5c77834c50..a4a3028103e3 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_core.h> +#include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/console.h> @@ -139,6 +140,16 @@ #define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */ /** + * struct xuartps - device data + * @refclk Reference clock + * @aperclk APB clock + */ +struct xuartps { + struct clk *refclk; + struct clk *aperclk; +}; + +/** * xuartps_isr - Interrupt handler * @irq: Irq number * @dev_id: Id of the port @@ -936,34 +947,55 @@ static int xuartps_probe(struct platform_device *pdev) int rc; struct uart_port *port; struct resource *res, *res2; - struct clk *clk; + struct xuartps *xuartps_data; - clk = of_clk_get(pdev->dev.of_node, 0); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "no clock specified\n"); - return PTR_ERR(clk); + xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL); + if (!xuartps_data) + return -ENOMEM; + + xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk"); + if (IS_ERR(xuartps_data->aperclk)) { + dev_err(&pdev->dev, "aper_clk clock not found.\n"); + rc = PTR_ERR(xuartps_data->aperclk); + goto err_out_free; + } + xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(xuartps_data->refclk)) { + dev_err(&pdev->dev, "ref_clk clock not found.\n"); + rc = PTR_ERR(xuartps_data->refclk); + goto err_out_clk_put_aper; } - rc = clk_prepare_enable(clk); + rc = clk_prepare_enable(xuartps_data->aperclk); + if (rc) { + dev_err(&pdev->dev, "Unable to enable APER clock.\n"); + goto err_out_clk_put; + } + rc = clk_prepare_enable(xuartps_data->refclk); if (rc) { - dev_err(&pdev->dev, "could not enable clock\n"); - return -EBUSY; + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto err_out_clk_dis_aper; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + if (!res) { + rc = -ENODEV; + goto err_out_clk_disable; + } res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; + if (!res2) { + rc = -ENODEV; + goto err_out_clk_disable; + } /* Initialize the port structure */ port = xuartps_get_port(); if (!port) { dev_err(&pdev->dev, "Cannot get uart_port structure\n"); - return -ENODEV; + rc = -ENODEV; + goto err_out_clk_disable; } else { /* Register the port. * This function also registers this device with the tty layer @@ -972,18 +1004,31 @@ static int xuartps_probe(struct platform_device *pdev) port->mapbase = res->start; port->irq = res2->start; port->dev = &pdev->dev; - port->uartclk = clk_get_rate(clk); - port->private_data = clk; + port->uartclk = clk_get_rate(xuartps_data->refclk); + port->private_data = xuartps_data; dev_set_drvdata(&pdev->dev, port); rc = uart_add_one_port(&xuartps_uart_driver, port); if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); dev_set_drvdata(&pdev->dev, NULL); - return rc; + goto err_out_clk_disable; } return 0; } + +err_out_clk_disable: + clk_disable_unprepare(xuartps_data->refclk); +err_out_clk_dis_aper: + clk_disable_unprepare(xuartps_data->aperclk); +err_out_clk_put: + clk_put(xuartps_data->refclk); +err_out_clk_put_aper: + clk_put(xuartps_data->aperclk); +err_out_free: + kfree(xuartps_data); + + return rc; } /** @@ -995,14 +1040,18 @@ static int xuartps_probe(struct platform_device *pdev) static int xuartps_remove(struct platform_device *pdev) { struct uart_port *port = dev_get_drvdata(&pdev->dev); - struct clk *clk = port->private_data; + struct xuartps *xuartps_data = port->private_data; int rc; /* Remove the xuartps port from the serial core */ rc = uart_remove_one_port(&xuartps_uart_driver, port); dev_set_drvdata(&pdev->dev, NULL); port->mapbase = 0; - clk_disable_unprepare(clk); + clk_disable_unprepare(xuartps_data->refclk); + clk_disable_unprepare(xuartps_data->aperclk); + clk_put(xuartps_data->refclk); + clk_put(xuartps_data->aperclk); + kfree(xuartps_data); return rc; } diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 49b098bedf9b..475c9c114689 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -276,8 +276,9 @@ static void ci_role_work(struct work_struct *work) ci_role_stop(ci); ci_role_start(ci, role); - enable_irq(ci->irq); } + + enable_irq(ci->irq); } static irqreturn_t ci_irq(int irq, void *data) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 519ead2443c5..b501346484ae 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1678,8 +1678,11 @@ static int udc_start(struct ci13xxx *ci) ci->gadget.ep0 = &ci->ep0in->ep; - if (ci->global_phy) + if (ci->global_phy) { ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR(ci->transceiver)) + ci->transceiver = NULL; + } if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { @@ -1694,7 +1697,7 @@ static int udc_start(struct ci13xxx *ci) goto put_transceiver; } - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { retval = otg_set_peripheral(ci->transceiver->otg, &ci->gadget); if (retval) @@ -1711,7 +1714,7 @@ static int udc_start(struct ci13xxx *ci) return retval; remove_trans: - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); @@ -1719,7 +1722,7 @@ remove_trans: dev_err(dev, "error = %i\n", retval); put_transceiver: - if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) + if (ci->transceiver && ci->global_phy) usb_put_phy(ci->transceiver); destroy_eps: destroy_eps(ci); @@ -1747,7 +1750,7 @@ static void udc_stop(struct ci13xxx *ci) dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 090b411d893f..7d8dd5aad236 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -165,11 +165,12 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ - tty_termios_copy_hw(&tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) @@ -187,12 +188,11 @@ static int f81232_tiocmset(struct tty_struct *tty, static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; int result; /* Setup termios */ if (tty) - f81232_set_termios(tty, port, &tmp_termios); + f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7151659367a0..048cd44d51b1 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -284,7 +284,7 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; cflag = tty->termios.c_cflag; @@ -293,7 +293,8 @@ static void pl2303_set_termios(struct tty_struct *tty, if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - tty->termios = *old_termios; + if (old_termios) + tty->termios = *old_termios; return; } @@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else if ((old_termios->c_cflag & CBAUD) == B0) + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; @@ -492,7 +493,6 @@ static void pl2303_close(struct usb_serial_port *port) static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; @@ -508,7 +508,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) /* Setup termios */ if (tty) - pl2303_set_termios(tty, port, &tmp_termios); + pl2303_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cf3df793c2b7..ddf6c47137dc 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -291,7 +291,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; - unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; @@ -299,15 +298,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty, u8 control; /* check that they really want us to change something */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; - if ((old_cflag & CBAUD) == B0) { + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; - if (!(old_cflag & CRTSCTS)) + if (!(old_termios->c_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { @@ -394,7 +393,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; @@ -411,7 +409,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) spcp8x5_set_ctrl_line(port, priv->line_control); if (tty) - spcp8x5_set_termios(tty, port, &tmp_termios); + spcp8x5_set_termios(tty, port, NULL); port->port.drain_delay = 256; diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 2b51e2336aa2..f80d3dd41d8c 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -155,14 +155,11 @@ static void vhost_net_ubuf_put_and_wait(struct vhost_net_ubuf_ref *ubufs) static void vhost_net_clear_ubuf_info(struct vhost_net *n) { - - bool zcopy; int i; - for (i = 0; i < n->dev.nvqs; ++i) { - zcopy = vhost_net_zcopy_mask & (0x1 << i); - if (zcopy) - kfree(n->vqs[i].ubuf_info); + for (i = 0; i < VHOST_NET_VQ_MAX; ++i) { + kfree(n->vqs[i].ubuf_info); + n->vqs[i].ubuf_info = NULL; } } @@ -171,7 +168,7 @@ int vhost_net_set_ubuf_info(struct vhost_net *n) bool zcopy; int i; - for (i = 0; i < n->dev.nvqs; ++i) { + for (i = 0; i < VHOST_NET_VQ_MAX; ++i) { zcopy = vhost_net_zcopy_mask & (0x1 << i); if (!zcopy) continue; @@ -183,12 +180,7 @@ int vhost_net_set_ubuf_info(struct vhost_net *n) return 0; err: - while (i--) { - zcopy = vhost_net_zcopy_mask & (0x1 << i); - if (!zcopy) - continue; - kfree(n->vqs[i].ubuf_info); - } + vhost_net_clear_ubuf_info(n); return -ENOMEM; } @@ -196,12 +188,12 @@ void vhost_net_vq_reset(struct vhost_net *n) { int i; + vhost_net_clear_ubuf_info(n); + for (i = 0; i < VHOST_NET_VQ_MAX; i++) { n->vqs[i].done_idx = 0; n->vqs[i].upend_idx = 0; n->vqs[i].ubufs = NULL; - kfree(n->vqs[i].ubuf_info); - n->vqs[i].ubuf_info = NULL; n->vqs[i].vhost_hlen = 0; n->vqs[i].sock_hlen = 0; } @@ -436,7 +428,8 @@ static void handle_tx(struct vhost_net *net) kref_get(&ubufs->kref); } nvq->upend_idx = (nvq->upend_idx + 1) % UIO_MAXIOV; - } + } else + msg.msg_control = NULL; /* TODO: Check specific error and bomb out unless ENOBUFS? */ err = sock->ops->sendmsg(NULL, sock, &msg, len); if (unlikely(err < 0)) { @@ -1053,6 +1046,10 @@ static long vhost_net_set_owner(struct vhost_net *n) int r; mutex_lock(&n->dev.mutex); + if (vhost_dev_has_owner(&n->dev)) { + r = -EBUSY; + goto out; + } r = vhost_net_set_ubuf_info(n); if (r) goto out; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index beee7f5787e6..60aa5ad09a2f 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -344,13 +344,19 @@ static int vhost_attach_cgroups(struct vhost_dev *dev) } /* Caller should have device mutex */ +bool vhost_dev_has_owner(struct vhost_dev *dev) +{ + return dev->mm; +} + +/* Caller should have device mutex */ long vhost_dev_set_owner(struct vhost_dev *dev) { struct task_struct *worker; int err; /* Is there an owner already? */ - if (dev->mm) { + if (vhost_dev_has_owner(dev)) { err = -EBUSY; goto err_mm; } diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index a7ad63592987..64adcf99ff33 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -133,6 +133,7 @@ struct vhost_dev { long vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs, int nvqs); long vhost_dev_set_owner(struct vhost_dev *dev); +bool vhost_dev_has_owner(struct vhost_dev *dev); long vhost_dev_check_owner(struct vhost_dev *); struct vhost_memory *vhost_dev_reset_owner_prepare(void); void vhost_dev_reset_owner(struct vhost_dev *, struct vhost_memory *); diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index cc072c66c766..0f0493c63371 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -379,10 +379,10 @@ static int xen_tmem_init(void) #ifdef CONFIG_FRONTSWAP if (tmem_enabled && frontswap) { char *s = ""; - struct frontswap_ops *old_ops = - frontswap_register_ops(&tmem_frontswap_ops); + struct frontswap_ops *old_ops; tmem_frontswap_poolid = -1; + old_ops = frontswap_register_ops(&tmem_frontswap_ops); if (IS_ERR(old_ops) || old_ops) { if (IS_ERR(old_ops)) return PTR_ERR(old_ops); @@ -141,9 +141,6 @@ static void aio_free_ring(struct kioctx *ctx) for (i = 0; i < ctx->nr_pages; i++) put_page(ctx->ring_pages[i]); - if (ctx->mmap_size) - vm_munmap(ctx->mmap_base, ctx->mmap_size); - if (ctx->ring_pages && ctx->ring_pages != ctx->internal_pages) kfree(ctx->ring_pages); } @@ -322,11 +319,6 @@ static void free_ioctx(struct kioctx *ctx) aio_free_ring(ctx); - spin_lock(&aio_nr_lock); - BUG_ON(aio_nr - ctx->max_reqs > aio_nr); - aio_nr -= ctx->max_reqs; - spin_unlock(&aio_nr_lock); - pr_debug("freeing %p\n", ctx); /* @@ -435,17 +427,24 @@ static void kill_ioctx(struct kioctx *ctx) { if (!atomic_xchg(&ctx->dead, 1)) { hlist_del_rcu(&ctx->list); - /* Between hlist_del_rcu() and dropping the initial ref */ - synchronize_rcu(); /* - * We can't punt to workqueue here because put_ioctx() -> - * free_ioctx() will unmap the ringbuffer, and that has to be - * done in the original process's context. kill_ioctx_rcu/work() - * exist for exit_aio(), as in that path free_ioctx() won't do - * the unmap. + * It'd be more correct to do this in free_ioctx(), after all + * the outstanding kiocbs have finished - but by then io_destroy + * has already returned, so io_setup() could potentially return + * -EAGAIN with no ioctxs actually in use (as far as userspace + * could tell). */ - kill_ioctx_work(&ctx->rcu_work); + spin_lock(&aio_nr_lock); + BUG_ON(aio_nr - ctx->max_reqs > aio_nr); + aio_nr -= ctx->max_reqs; + spin_unlock(&aio_nr_lock); + + if (ctx->mmap_size) + vm_munmap(ctx->mmap_base, ctx->mmap_size); + + /* Between hlist_del_rcu() and dropping the initial ref */ + call_rcu(&ctx->rcu_head, kill_ioctx_rcu); } } @@ -495,10 +494,7 @@ void exit_aio(struct mm_struct *mm) */ ctx->mmap_size = 0; - if (!atomic_xchg(&ctx->dead, 1)) { - hlist_del_rcu(&ctx->list); - call_rcu(&ctx->rcu_head, kill_ioctx_rcu); - } + kill_ioctx(ctx); } } diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e7b3cb5286a5..b8b60b660c8f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2859,8 +2859,8 @@ fail_qgroup: btrfs_free_qgroup_config(fs_info); fail_trans_kthread: kthread_stop(fs_info->transaction_kthread); - del_fs_roots(fs_info); btrfs_cleanup_transaction(fs_info->tree_root); + del_fs_roots(fs_info); fail_cleaner: kthread_stop(fs_info->cleaner_kthread); @@ -3512,15 +3512,15 @@ int close_ctree(struct btrfs_root *root) percpu_counter_sum(&fs_info->delalloc_bytes)); } - free_root_pointers(fs_info, 1); - btrfs_free_block_groups(fs_info); + btrfs_stop_all_workers(fs_info); + del_fs_roots(fs_info); - iput(fs_info->btree_inode); + free_root_pointers(fs_info, 1); - btrfs_stop_all_workers(fs_info); + iput(fs_info->btree_inode); #ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY if (btrfs_test_opt(root, CHECK_INTEGRITY)) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index af978f7682b3..17f3064b4a3e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8012,6 +8012,9 @@ int btrfs_drop_inode(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; + if (root == NULL) + return 1; + /* the snap/subvol tree is on deleting */ if (btrfs_root_refs(&root->root_item) == 0 && root != root->fs_info->tree_root) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 395b82031a42..4febca4fc2de 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -4082,7 +4082,7 @@ out: return inode; } -static struct reloc_control *alloc_reloc_control(void) +static struct reloc_control *alloc_reloc_control(struct btrfs_fs_info *fs_info) { struct reloc_control *rc; @@ -4093,7 +4093,8 @@ static struct reloc_control *alloc_reloc_control(void) INIT_LIST_HEAD(&rc->reloc_roots); backref_cache_init(&rc->backref_cache); mapping_tree_init(&rc->reloc_root_tree); - extent_io_tree_init(&rc->processed_blocks, NULL); + extent_io_tree_init(&rc->processed_blocks, + fs_info->btree_inode->i_mapping); return rc; } @@ -4110,7 +4111,7 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start) int rw = 0; int err = 0; - rc = alloc_reloc_control(); + rc = alloc_reloc_control(fs_info); if (!rc) return -ENOMEM; @@ -4311,7 +4312,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) if (list_empty(&reloc_roots)) goto out; - rc = alloc_reloc_control(); + rc = alloc_reloc_control(root->fs_info); if (!rc) { err = -ENOMEM; goto out; diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c index 202dd3d68be0..ebbf680378e2 100644 --- a/fs/ceph/locks.c +++ b/fs/ceph/locks.c @@ -191,27 +191,23 @@ void ceph_count_locks(struct inode *inode, int *fcntl_count, int *flock_count) } /** - * Encode the flock and fcntl locks for the given inode into the pagelist. - * Format is: #fcntl locks, sequential fcntl locks, #flock locks, - * sequential flock locks. - * Must be called with lock_flocks() already held. - * If we encounter more of a specific lock type than expected, - * we return the value 1. + * Encode the flock and fcntl locks for the given inode into the ceph_filelock + * array. Must be called with lock_flocks() already held. + * If we encounter more of a specific lock type than expected, return -ENOSPC. */ -int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, - int num_fcntl_locks, int num_flock_locks) +int ceph_encode_locks_to_buffer(struct inode *inode, + struct ceph_filelock *flocks, + int num_fcntl_locks, int num_flock_locks) { struct file_lock *lock; - struct ceph_filelock cephlock; int err = 0; int seen_fcntl = 0; int seen_flock = 0; + int l = 0; dout("encoding %d flock and %d fcntl locks", num_flock_locks, num_fcntl_locks); - err = ceph_pagelist_append(pagelist, &num_fcntl_locks, sizeof(u32)); - if (err) - goto fail; + for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { if (lock->fl_flags & FL_POSIX) { ++seen_fcntl; @@ -219,19 +215,12 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, err = -ENOSPC; goto fail; } - err = lock_to_ceph_filelock(lock, &cephlock); + err = lock_to_ceph_filelock(lock, &flocks[l]); if (err) goto fail; - err = ceph_pagelist_append(pagelist, &cephlock, - sizeof(struct ceph_filelock)); + ++l; } - if (err) - goto fail; } - - err = ceph_pagelist_append(pagelist, &num_flock_locks, sizeof(u32)); - if (err) - goto fail; for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) { if (lock->fl_flags & FL_FLOCK) { ++seen_flock; @@ -239,19 +228,51 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist, err = -ENOSPC; goto fail; } - err = lock_to_ceph_filelock(lock, &cephlock); + err = lock_to_ceph_filelock(lock, &flocks[l]); if (err) goto fail; - err = ceph_pagelist_append(pagelist, &cephlock, - sizeof(struct ceph_filelock)); + ++l; } - if (err) - goto fail; } fail: return err; } +/** + * Copy the encoded flock and fcntl locks into the pagelist. + * Format is: #fcntl locks, sequential fcntl locks, #flock locks, + * sequential flock locks. + * Returns zero on success. + */ +int ceph_locks_to_pagelist(struct ceph_filelock *flocks, + struct ceph_pagelist *pagelist, + int num_fcntl_locks, int num_flock_locks) +{ + int err = 0; + __le32 nlocks; + + nlocks = cpu_to_le32(num_fcntl_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); + if (err) + goto out_fail; + + err = ceph_pagelist_append(pagelist, flocks, + num_fcntl_locks * sizeof(*flocks)); + if (err) + goto out_fail; + + nlocks = cpu_to_le32(num_flock_locks); + err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks)); + if (err) + goto out_fail; + + err = ceph_pagelist_append(pagelist, + &flocks[num_fcntl_locks], + num_flock_locks * sizeof(*flocks)); +out_fail: + return err; +} + /* * Given a pointer to a lock, convert it to a ceph filelock */ diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 4f22671a5bd4..4d2920304be8 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -2478,39 +2478,44 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, if (recon_state->flock) { int num_fcntl_locks, num_flock_locks; - struct ceph_pagelist_cursor trunc_point; - - ceph_pagelist_set_cursor(pagelist, &trunc_point); - do { - lock_flocks(); - ceph_count_locks(inode, &num_fcntl_locks, - &num_flock_locks); - rec.v2.flock_len = (2*sizeof(u32) + - (num_fcntl_locks+num_flock_locks) * - sizeof(struct ceph_filelock)); - unlock_flocks(); - - /* pre-alloc pagelist */ - ceph_pagelist_truncate(pagelist, &trunc_point); - err = ceph_pagelist_append(pagelist, &rec, reclen); - if (!err) - err = ceph_pagelist_reserve(pagelist, - rec.v2.flock_len); - - /* encode locks */ - if (!err) { - lock_flocks(); - err = ceph_encode_locks(inode, - pagelist, - num_fcntl_locks, - num_flock_locks); - unlock_flocks(); - } - } while (err == -ENOSPC); + struct ceph_filelock *flocks; + +encode_again: + lock_flocks(); + ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks); + unlock_flocks(); + flocks = kmalloc((num_fcntl_locks+num_flock_locks) * + sizeof(struct ceph_filelock), GFP_NOFS); + if (!flocks) { + err = -ENOMEM; + goto out_free; + } + lock_flocks(); + err = ceph_encode_locks_to_buffer(inode, flocks, + num_fcntl_locks, + num_flock_locks); + unlock_flocks(); + if (err) { + kfree(flocks); + if (err == -ENOSPC) + goto encode_again; + goto out_free; + } + /* + * number of encoded locks is stable, so copy to pagelist + */ + rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) + + (num_fcntl_locks+num_flock_locks) * + sizeof(struct ceph_filelock)); + err = ceph_pagelist_append(pagelist, &rec, reclen); + if (!err) + err = ceph_locks_to_pagelist(flocks, pagelist, + num_fcntl_locks, + num_flock_locks); + kfree(flocks); } else { err = ceph_pagelist_append(pagelist, &rec, reclen); } - out_free: kfree(path); out_dput: diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 8696be2ff679..7ccfdb4aea2e 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -822,8 +822,13 @@ extern const struct export_operations ceph_export_ops; extern int ceph_lock(struct file *file, int cmd, struct file_lock *fl); extern int ceph_flock(struct file *file, int cmd, struct file_lock *fl); extern void ceph_count_locks(struct inode *inode, int *p_num, int *f_num); -extern int ceph_encode_locks(struct inode *i, struct ceph_pagelist *p, - int p_locks, int f_locks); +extern int ceph_encode_locks_to_buffer(struct inode *inode, + struct ceph_filelock *flocks, + int num_fcntl_locks, + int num_flock_locks); +extern int ceph_locks_to_pagelist(struct ceph_filelock *flocks, + struct ceph_pagelist *pagelist, + int num_fcntl_locks, int num_flock_locks); extern int lock_to_ceph_filelock(struct file_lock *fl, struct ceph_filelock *c); /* debugfs.c */ diff --git a/fs/file_table.c b/fs/file_table.c index cd4d87a82951..485dc0eddd67 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -306,17 +306,18 @@ void fput(struct file *file) { if (atomic_long_dec_and_test(&file->f_count)) { struct task_struct *task = current; + unsigned long flags; + file_sb_list_del(file); - if (unlikely(in_interrupt() || task->flags & PF_KTHREAD)) { - unsigned long flags; - spin_lock_irqsave(&delayed_fput_lock, flags); - list_add(&file->f_u.fu_list, &delayed_fput_list); - schedule_work(&delayed_fput_work); - spin_unlock_irqrestore(&delayed_fput_lock, flags); - return; + if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) { + init_task_work(&file->f_u.fu_rcuhead, ____fput); + if (!task_work_add(task, &file->f_u.fu_rcuhead, true)) + return; } - init_task_work(&file->f_u.fu_rcuhead, ____fput); - task_work_add(task, &file->f_u.fu_rcuhead, true); + spin_lock_irqsave(&delayed_fput_lock, flags); + list_add(&file->f_u.fu_list, &delayed_fput_list); + schedule_work(&delayed_fput_work); + spin_unlock_irqrestore(&delayed_fput_lock, flags); } } diff --git a/fs/namei.c b/fs/namei.c index 85e40d1c0a8f..9ed9361223c0 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1976,7 +1976,7 @@ static int path_lookupat(int dfd, const char *name, err = complete_walk(nd); if (!err && nd->flags & LOOKUP_DIRECTORY) { - if (!nd->inode->i_op->lookup) { + if (!can_lookup(nd->inode)) { path_put(&nd->path); err = -ENOTDIR; } @@ -2850,7 +2850,7 @@ finish_lookup: if ((open_flag & O_CREAT) && S_ISDIR(nd->inode->i_mode)) goto out; error = -ENOTDIR; - if ((nd->flags & LOOKUP_DIRECTORY) && !nd->inode->i_op->lookup) + if ((nd->flags & LOOKUP_DIRECTORY) && !can_lookup(nd->inode)) goto out; audit_inode(name, nd->path.dentry, 0); finish_open: diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c index 816326093656..6792ce11f2bf 100644 --- a/fs/ncpfs/dir.c +++ b/fs/ncpfs/dir.c @@ -1029,15 +1029,6 @@ static int ncp_rmdir(struct inode *dir, struct dentry *dentry) DPRINTK("ncp_rmdir: removing %s/%s\n", dentry->d_parent->d_name.name, dentry->d_name.name); - /* - * fail with EBUSY if there are still references to this - * directory. - */ - dentry_unhash(dentry); - error = -EBUSY; - if (!d_unhashed(dentry)) - goto out; - len = sizeof(__name); error = ncp_io2vol(server, __name, &len, dentry->d_name.name, dentry->d_name.len, !ncp_preserve_case(dir)); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index b3fdd1a323d6..e68588e6b1e8 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1408,6 +1408,7 @@ int dlm_mig_lockres_handler(struct o2net_msg *msg, u32 len, void *data, mres->lockname_len, mres->lockname); ret = -EFAULT; spin_unlock(&res->spinlock); + dlm_lockres_put(res); goto leave; } res->state |= DLM_LOCK_RES_MIGRATING; diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 04ee1b57c243..b4a5cdf9dbc5 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -947,7 +947,7 @@ leave: ocfs2_free_dir_lookup_result(&orphan_insert); ocfs2_free_dir_lookup_result(&lookup); - if (status) + if (status && (status != -ENOTEMPTY)) mlog_errno(status); return status; @@ -2216,7 +2216,7 @@ out: brelse(orphan_dir_bh); - return 0; + return ret; } int ocfs2_create_inode_in_orphan(struct inode *dir, diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c index bd4b5a740ff1..bdfabdaefdce 100644 --- a/fs/proc/kmsg.c +++ b/fs/proc/kmsg.c @@ -21,12 +21,12 @@ extern wait_queue_head_t log_wait; static int kmsg_open(struct inode * inode, struct file * file) { - return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_PROC); } static int kmsg_release(struct inode * inode, struct file * file) { - (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_FILE); + (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_PROC); return 0; } @@ -34,15 +34,15 @@ static ssize_t kmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { if ((file->f_flags & O_NONBLOCK) && - !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return -EAGAIN; - return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_PROC); } static unsigned int kmsg_poll(struct file *file, poll_table *wait) { poll_wait(file, &log_wait, wait); - if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return POLLIN | POLLRDNORM; return 0; } diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h index f9d7846097e2..444a7704596c 100644 --- a/fs/xfs/xfs_attr_leaf.h +++ b/fs/xfs/xfs_attr_leaf.h @@ -128,6 +128,7 @@ struct xfs_attr3_leaf_hdr { __u8 holes; __u8 pad1; struct xfs_attr_leaf_map freemap[XFS_ATTR_LEAF_MAPSIZE]; + __be32 pad2; /* 64 bit alignment */ }; #define XFS_ATTR3_LEAF_CRC_OFF (offsetof(struct xfs_attr3_leaf_hdr, info.crc)) diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 8804b8a3c310..0903960410a2 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -2544,7 +2544,17 @@ xfs_btree_new_iroot( if (error) goto error0; + /* + * we can't just memcpy() the root in for CRC enabled btree blocks. + * In that case have to also ensure the blkno remains correct + */ memcpy(cblock, block, xfs_btree_block_len(cur)); + if (cur->bc_flags & XFS_BTREE_CRC_BLOCKS) { + if (cur->bc_flags & XFS_BTREE_LONG_PTRS) + cblock->bb_u.l.bb_blkno = cpu_to_be64(cbp->b_bn); + else + cblock->bb_u.s.bb_blkno = cpu_to_be64(cbp->b_bn); + } be16_add_cpu(&block->bb_level, 1); xfs_btree_set_numrecs(block, 1); diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index 995f1f505a52..7826782b8d78 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -266,6 +266,7 @@ struct xfs_dir3_blk_hdr { struct xfs_dir3_data_hdr { struct xfs_dir3_blk_hdr hdr; xfs_dir2_data_free_t best_free[XFS_DIR2_DATA_FD_COUNT]; + __be32 pad; /* 64 bit alignment */ }; #define XFS_DIR3_DATA_CRC_OFF offsetof(struct xfs_dir3_data_hdr, hdr.crc) @@ -477,7 +478,7 @@ struct xfs_dir3_leaf_hdr { struct xfs_da3_blkinfo info; /* header for da routines */ __be16 count; /* count of entries */ __be16 stale; /* count of stale entries */ - __be32 pad; + __be32 pad; /* 64 bit alignment */ }; struct xfs_dir3_icleaf_hdr { @@ -715,7 +716,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ - __be32 pad; /* 64 bit alignment. */ + __be32 pad; /* 64 bit alignment */ }; struct xfs_dir3_free { diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 45a85ff84da1..7cf5e4eafe28 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1845,7 +1845,13 @@ xlog_recover_do_inode_buffer( xfs_agino_t *buffer_nextp; trace_xfs_log_recover_buf_inode_buf(mp->m_log, buf_f); - bp->b_ops = &xfs_inode_buf_ops; + + /* + * Post recovery validation only works properly on CRC enabled + * filesystems. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + bp->b_ops = &xfs_inode_buf_ops; inodes_per_buf = BBTOB(bp->b_io_length) >> mp->m_sb.sb_inodelog; for (i = 0; i < inodes_per_buf; i++) { @@ -2205,7 +2211,16 @@ xlog_recover_do_reg_buffer( /* Shouldn't be any more regions */ ASSERT(i == item->ri_total); - xlog_recovery_validate_buf_type(mp, bp, buf_f); + /* + * We can only do post recovery validation on items on CRC enabled + * fielsystems as we need to know when the buffer was written to be able + * to determine if we should have replayed the item. If we replay old + * metadata over a newer buffer, then it will enter a temporarily + * inconsistent state resulting in verification failures. Hence for now + * just avoid the verification stage for non-crc filesystems + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + xlog_recovery_validate_buf_type(mp, bp, buf_f); } /* diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index f6bfbd734669..e8e310c05097 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -314,7 +314,8 @@ STATIC int xfs_mount_validate_sb( xfs_mount_t *mp, xfs_sb_t *sbp, - bool check_inprogress) + bool check_inprogress, + bool check_version) { /* @@ -337,9 +338,10 @@ xfs_mount_validate_sb( /* * Version 5 superblock feature mask validation. Reject combinations the - * kernel cannot support up front before checking anything else. + * kernel cannot support up front before checking anything else. For + * write validation, we don't need to check feature masks. */ - if (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5) { + if (check_version && XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5) { xfs_alert(mp, "Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled!\n" "Use of these features in this kernel is at your own risk!"); @@ -675,7 +677,8 @@ xfs_sb_to_disk( static int xfs_sb_verify( - struct xfs_buf *bp) + struct xfs_buf *bp, + bool check_version) { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_sb sb; @@ -686,7 +689,8 @@ xfs_sb_verify( * Only check the in progress field for the primary superblock as * mkfs.xfs doesn't clear it from secondary superblocks. */ - return xfs_mount_validate_sb(mp, &sb, bp->b_bn == XFS_SB_DADDR); + return xfs_mount_validate_sb(mp, &sb, bp->b_bn == XFS_SB_DADDR, + check_version); } /* @@ -719,7 +723,7 @@ xfs_sb_read_verify( goto out_error; } } - error = xfs_sb_verify(bp); + error = xfs_sb_verify(bp, true); out_error: if (error) { @@ -758,7 +762,7 @@ xfs_sb_write_verify( struct xfs_buf_log_item *bip = bp->b_fspriv; int error; - error = xfs_sb_verify(bp); + error = xfs_sb_verify(bp, false); if (error) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, error); diff --git a/include/asm-generic/kvm_para.h b/include/asm-generic/kvm_para.h index 9d96605f160a..fa25becbdcaf 100644 --- a/include/asm-generic/kvm_para.h +++ b/include/asm-generic/kvm_para.h @@ -18,4 +18,9 @@ static inline unsigned int kvm_arch_para_features(void) return 0; } +static inline bool kvm_para_available(void) +{ + return false; +} + #endif diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h new file mode 100644 index 000000000000..7fcdf90879f2 --- /dev/null +++ b/include/dt-bindings/clock/imx6sl-clock.h @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SL_H +#define __DT_BINDINGS_CLOCK_IMX6SL_H + +#define IMX6SL_CLK_DUMMY 0 +#define IMX6SL_CLK_CKIL 1 +#define IMX6SL_CLK_OSC 2 +#define IMX6SL_CLK_PLL1_SYS 3 +#define IMX6SL_CLK_PLL2_BUS 4 +#define IMX6SL_CLK_PLL3_USB_OTG 5 +#define IMX6SL_CLK_PLL4_AUDIO 6 +#define IMX6SL_CLK_PLL5_VIDEO 7 +#define IMX6SL_CLK_PLL6_ENET 8 +#define IMX6SL_CLK_PLL7_USB_HOST 9 +#define IMX6SL_CLK_USBPHY1 10 +#define IMX6SL_CLK_USBPHY2 11 +#define IMX6SL_CLK_USBPHY1_GATE 12 +#define IMX6SL_CLK_USBPHY2_GATE 13 +#define IMX6SL_CLK_PLL4_POST_DIV 14 +#define IMX6SL_CLK_PLL5_POST_DIV 15 +#define IMX6SL_CLK_PLL5_VIDEO_DIV 16 +#define IMX6SL_CLK_ENET_REF 17 +#define IMX6SL_CLK_PLL2_PFD0 18 +#define IMX6SL_CLK_PLL2_PFD1 19 +#define IMX6SL_CLK_PLL2_PFD2 20 +#define IMX6SL_CLK_PLL3_PFD0 21 +#define IMX6SL_CLK_PLL3_PFD1 22 +#define IMX6SL_CLK_PLL3_PFD2 23 +#define IMX6SL_CLK_PLL3_PFD3 24 +#define IMX6SL_CLK_PLL2_198M 25 +#define IMX6SL_CLK_PLL3_120M 26 +#define IMX6SL_CLK_PLL3_80M 27 +#define IMX6SL_CLK_PLL3_60M 28 +#define IMX6SL_CLK_STEP 29 +#define IMX6SL_CLK_PLL1_SW 30 +#define IMX6SL_CLK_OCRAM_ALT_SEL 31 +#define IMX6SL_CLK_OCRAM_SEL 32 +#define IMX6SL_CLK_PRE_PERIPH2_SEL 33 +#define IMX6SL_CLK_PRE_PERIPH_SEL 34 +#define IMX6SL_CLK_PERIPH2_CLK2_SEL 35 +#define IMX6SL_CLK_PERIPH_CLK2_SEL 36 +#define IMX6SL_CLK_CSI_SEL 37 +#define IMX6SL_CLK_LCDIF_AXI_SEL 38 +#define IMX6SL_CLK_USDHC1_SEL 39 +#define IMX6SL_CLK_USDHC2_SEL 40 +#define IMX6SL_CLK_USDHC3_SEL 41 +#define IMX6SL_CLK_USDHC4_SEL 42 +#define IMX6SL_CLK_SSI1_SEL 43 +#define IMX6SL_CLK_SSI2_SEL 44 +#define IMX6SL_CLK_SSI3_SEL 45 +#define IMX6SL_CLK_PERCLK_SEL 46 +#define IMX6SL_CLK_PXP_AXI_SEL 47 +#define IMX6SL_CLK_EPDC_AXI_SEL 48 +#define IMX6SL_CLK_GPU2D_OVG_SEL 49 +#define IMX6SL_CLK_GPU2D_SEL 50 +#define IMX6SL_CLK_LCDIF_PIX_SEL 51 +#define IMX6SL_CLK_EPDC_PIX_SEL 52 +#define IMX6SL_CLK_SPDIF0_SEL 53 +#define IMX6SL_CLK_SPDIF1_SEL 54 +#define IMX6SL_CLK_EXTERN_AUDIO_SEL 55 +#define IMX6SL_CLK_ECSPI_SEL 56 +#define IMX6SL_CLK_UART_SEL 57 +#define IMX6SL_CLK_PERIPH 58 +#define IMX6SL_CLK_PERIPH2 59 +#define IMX6SL_CLK_OCRAM_PODF 60 +#define IMX6SL_CLK_PERIPH_CLK2_PODF 61 +#define IMX6SL_CLK_PERIPH2_CLK2_PODF 62 +#define IMX6SL_CLK_IPG 63 +#define IMX6SL_CLK_CSI_PODF 64 +#define IMX6SL_CLK_LCDIF_AXI_PODF 65 +#define IMX6SL_CLK_USDHC1_PODF 66 +#define IMX6SL_CLK_USDHC2_PODF 67 +#define IMX6SL_CLK_USDHC3_PODF 68 +#define IMX6SL_CLK_USDHC4_PODF 69 +#define IMX6SL_CLK_SSI1_PRED 70 +#define IMX6SL_CLK_SSI1_PODF 71 +#define IMX6SL_CLK_SSI2_PRED 72 +#define IMX6SL_CLK_SSI2_PODF 73 +#define IMX6SL_CLK_SSI3_PRED 74 +#define IMX6SL_CLK_SSI3_PODF 75 +#define IMX6SL_CLK_PERCLK 76 +#define IMX6SL_CLK_PXP_AXI_PODF 77 +#define IMX6SL_CLK_EPDC_AXI_PODF 78 +#define IMX6SL_CLK_GPU2D_OVG_PODF 79 +#define IMX6SL_CLK_GPU2D_PODF 80 +#define IMX6SL_CLK_LCDIF_PIX_PRED 81 +#define IMX6SL_CLK_EPDC_PIX_PRED 82 +#define IMX6SL_CLK_LCDIF_PIX_PODF 83 +#define IMX6SL_CLK_EPDC_PIX_PODF 84 +#define IMX6SL_CLK_SPDIF0_PRED 85 +#define IMX6SL_CLK_SPDIF0_PODF 86 +#define IMX6SL_CLK_SPDIF1_PRED 87 +#define IMX6SL_CLK_SPDIF1_PODF 88 +#define IMX6SL_CLK_EXTERN_AUDIO_PRED 89 +#define IMX6SL_CLK_EXTERN_AUDIO_PODF 90 +#define IMX6SL_CLK_ECSPI_ROOT 91 +#define IMX6SL_CLK_UART_ROOT 92 +#define IMX6SL_CLK_AHB 93 +#define IMX6SL_CLK_MMDC_ROOT 94 +#define IMX6SL_CLK_ARM 95 +#define IMX6SL_CLK_ECSPI1 96 +#define IMX6SL_CLK_ECSPI2 97 +#define IMX6SL_CLK_ECSPI3 98 +#define IMX6SL_CLK_ECSPI4 99 +#define IMX6SL_CLK_EPIT1 100 +#define IMX6SL_CLK_EPIT2 101 +#define IMX6SL_CLK_EXTERN_AUDIO 102 +#define IMX6SL_CLK_GPT 103 +#define IMX6SL_CLK_GPT_SERIAL 104 +#define IMX6SL_CLK_GPU2D_OVG 105 +#define IMX6SL_CLK_I2C1 106 +#define IMX6SL_CLK_I2C2 107 +#define IMX6SL_CLK_I2C3 108 +#define IMX6SL_CLK_OCOTP 109 +#define IMX6SL_CLK_CSI 110 +#define IMX6SL_CLK_PXP_AXI 111 +#define IMX6SL_CLK_EPDC_AXI 112 +#define IMX6SL_CLK_LCDIF_AXI 113 +#define IMX6SL_CLK_LCDIF_PIX 114 +#define IMX6SL_CLK_EPDC_PIX 115 +#define IMX6SL_CLK_OCRAM 116 +#define IMX6SL_CLK_PWM1 117 +#define IMX6SL_CLK_PWM2 118 +#define IMX6SL_CLK_PWM3 119 +#define IMX6SL_CLK_PWM4 120 +#define IMX6SL_CLK_SDMA 121 +#define IMX6SL_CLK_SPDIF 122 +#define IMX6SL_CLK_SSI1 123 +#define IMX6SL_CLK_SSI2 124 +#define IMX6SL_CLK_SSI3 125 +#define IMX6SL_CLK_UART 126 +#define IMX6SL_CLK_UART_SERIAL 127 +#define IMX6SL_CLK_USBOH3 128 +#define IMX6SL_CLK_USDHC1 129 +#define IMX6SL_CLK_USDHC2 130 +#define IMX6SL_CLK_USDHC3 131 +#define IMX6SL_CLK_USDHC4 132 +#define IMX6SL_CLK_CLK_END 133 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */ diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h new file mode 100644 index 000000000000..614aec417902 --- /dev/null +++ b/include/dt-bindings/clock/tegra114-car.h @@ -0,0 +1,342 @@ +/* + * This header provides constants for binding nvidia,tegra114-car. + * + * The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 160 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 160 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA114_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA114_CAR_H + +/* 0 */ +/* 1 */ +/* 2 */ +/* 3 */ +#define TEGRA114_CLK_RTC 4 +#define TEGRA114_CLK_TIMER 5 +#define TEGRA114_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +/* 8 */ +#define TEGRA114_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA114_CLK_I2S1 11 +#define TEGRA114_CLK_I2C1 12 +#define TEGRA114_CLK_NDFLASH 13 +#define TEGRA114_CLK_SDMMC1 14 +#define TEGRA114_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA114_CLK_PWM 17 +#define TEGRA114_CLK_I2S2 18 +#define TEGRA114_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA114_CLK_GR_2D 21 +#define TEGRA114_CLK_USBD 22 +#define TEGRA114_CLK_ISP 23 +#define TEGRA114_CLK_GR_3D 24 +/* 25 */ +#define TEGRA114_CLK_DISP2 26 +#define TEGRA114_CLK_DISP1 27 +#define TEGRA114_CLK_HOST1X 28 +#define TEGRA114_CLK_VCP 29 +#define TEGRA114_CLK_I2S0 30 +/* 31 */ + +/* 32 */ +/* 33 */ +#define TEGRA114_CLK_APBDMA 34 +/* 35 */ +#define TEGRA114_CLK_KBC 36 +/* 37 */ +/* 38 */ +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA114_CLK_KFUSE 40 +#define TEGRA114_CLK_SBC1 41 +#define TEGRA114_CLK_NOR 42 +/* 43 */ +#define TEGRA114_CLK_SBC2 44 +/* 45 */ +#define TEGRA114_CLK_SBC3 46 +#define TEGRA114_CLK_I2C5 47 +#define TEGRA114_CLK_DSIA 48 +/* 49 */ +#define TEGRA114_CLK_MIPI 50 +#define TEGRA114_CLK_HDMI 51 +#define TEGRA114_CLK_CSI 52 +/* 53 */ +#define TEGRA114_CLK_I2C2 54 +#define TEGRA114_CLK_UARTC 55 +#define TEGRA114_CLK_MIPI_CAL 56 +#define TEGRA114_CLK_EMC 57 +#define TEGRA114_CLK_USB2 58 +#define TEGRA114_CLK_USB3 59 +/* 60 */ +#define TEGRA114_CLK_VDE 61 +#define TEGRA114_CLK_BSEA 62 +#define TEGRA114_CLK_BSEV 63 + +/* 64 */ +#define TEGRA114_CLK_UARTD 65 +/* 66 */ +#define TEGRA114_CLK_I2C3 67 +#define TEGRA114_CLK_SBC4 68 +#define TEGRA114_CLK_SDMMC3 69 +/* 70 */ +#define TEGRA114_CLK_OWR 71 +/* 72 */ +#define TEGRA114_CLK_CSITE 73 +/* 74 */ +/* 75 */ +#define TEGRA114_CLK_LA 76 +#define TEGRA114_CLK_TRACE 77 +#define TEGRA114_CLK_SOC_THERM 78 +#define TEGRA114_CLK_DTV 79 +#define TEGRA114_CLK_NDSPEED 80 +#define TEGRA114_CLK_I2CSLOW 81 +#define TEGRA114_CLK_DSIB 82 +#define TEGRA114_CLK_TSEC 83 +/* 84 */ +/* 85 */ +/* 86 */ +/* 87 */ +/* 88 */ +#define TEGRA114_CLK_XUSB_HOST 89 +/* 90 */ +#define TEGRA114_CLK_MSENC 91 +#define TEGRA114_CLK_CSUS 92 +/* 93 */ +/* 94 */ +/* 95 (bit affects xusb_dev and xusb_dev_src) */ + +/* 96 */ +/* 97 */ +/* 98 */ +#define TEGRA114_CLK_MSELECT 99 +#define TEGRA114_CLK_TSENSOR 100 +#define TEGRA114_CLK_I2S3 101 +#define TEGRA114_CLK_I2S4 102 +#define TEGRA114_CLK_I2C4 103 +#define TEGRA114_CLK_SBC5 104 +#define TEGRA114_CLK_SBC6 105 +#define TEGRA114_CLK_D_AUDIO 106 +#define TEGRA114_CLK_APBIF 107 +#define TEGRA114_CLK_DAM0 108 +#define TEGRA114_CLK_DAM1 109 +#define TEGRA114_CLK_DAM2 110 +#define TEGRA114_CLK_HDA2CODEC_2X 111 +/* 112 */ +#define TEGRA114_CLK_AUDIO0_2X 113 +#define TEGRA114_CLK_AUDIO1_2X 114 +#define TEGRA114_CLK_AUDIO2_2X 115 +#define TEGRA114_CLK_AUDIO3_2X 116 +#define TEGRA114_CLK_AUDIO4_2X 117 +#define TEGRA114_CLK_SPDIF_2X 118 +#define TEGRA114_CLK_ACTMON 119 +#define TEGRA114_CLK_EXTERN1 120 +#define TEGRA114_CLK_EXTERN2 121 +#define TEGRA114_CLK_EXTERN3 122 +/* 123 */ +/* 124 */ +#define TEGRA114_CLK_HDA 125 +/* 126 */ +#define TEGRA114_CLK_SE 127 + +#define TEGRA114_CLK_HDA2HDMI 128 +/* 129 */ +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ +/* xusb_host_src and xusb_ss_src) */ +#define TEGRA114_CLK_CILAB 144 +#define TEGRA114_CLK_CILCD 145 +#define TEGRA114_CLK_CILE 146 +#define TEGRA114_CLK_DSIALP 147 +#define TEGRA114_CLK_DSIBLP 148 +/* 149 */ +#define TEGRA114_CLK_DDS 150 +/* 151 */ +#define TEGRA114_CLK_DP2 152 +#define TEGRA114_CLK_AMX 153 +#define TEGRA114_CLK_ADX 154 +/* 155 (bit affects dfll_ref and dfll_soc) */ +#define TEGRA114_CLK_XUSB_SS 156 +/* 157 */ +/* 158 */ +/* 159 */ + +/* 160 */ +/* 161 */ +/* 162 */ +/* 163 */ +/* 164 */ +/* 165 */ +/* 166 */ +/* 167 */ +/* 168 */ +/* 169 */ +/* 170 */ +/* 171 */ +/* 172 */ +/* 173 */ +/* 174 */ +/* 175 */ +/* 176 */ +/* 177 */ +/* 178 */ +/* 179 */ +/* 180 */ +/* 181 */ +/* 182 */ +/* 183 */ +/* 184 */ +/* 185 */ +/* 186 */ +/* 187 */ +/* 188 */ +/* 189 */ +/* 190 */ +/* 191 */ + +#define TEGRA114_CLK_UARTB 192 +#define TEGRA114_CLK_VFIR 193 +#define TEGRA114_CLK_SPDIF_IN 194 +#define TEGRA114_CLK_SPDIF_OUT 195 +#define TEGRA114_CLK_VI 196 +#define TEGRA114_CLK_VI_SENSOR 197 +#define TEGRA114_CLK_FUSE 198 +#define TEGRA114_CLK_FUSE_BURN 199 +#define TEGRA114_CLK_CLK_32K 200 +#define TEGRA114_CLK_CLK_M 201 +#define TEGRA114_CLK_CLK_M_DIV2 202 +#define TEGRA114_CLK_CLK_M_DIV4 203 +#define TEGRA114_CLK_PLL_REF 204 +#define TEGRA114_CLK_PLL_C 205 +#define TEGRA114_CLK_PLL_C_OUT1 206 +#define TEGRA114_CLK_PLL_C2 207 +#define TEGRA114_CLK_PLL_C3 208 +#define TEGRA114_CLK_PLL_M 209 +#define TEGRA114_CLK_PLL_M_OUT1 210 +#define TEGRA114_CLK_PLL_P 211 +#define TEGRA114_CLK_PLL_P_OUT1 212 +#define TEGRA114_CLK_PLL_P_OUT2 213 +#define TEGRA114_CLK_PLL_P_OUT3 214 +#define TEGRA114_CLK_PLL_P_OUT4 215 +#define TEGRA114_CLK_PLL_A 216 +#define TEGRA114_CLK_PLL_A_OUT0 217 +#define TEGRA114_CLK_PLL_D 218 +#define TEGRA114_CLK_PLL_D_OUT0 219 +#define TEGRA114_CLK_PLL_D2 220 +#define TEGRA114_CLK_PLL_D2_OUT0 221 +#define TEGRA114_CLK_PLL_U 222 +#define TEGRA114_CLK_PLL_U_480M 223 + +#define TEGRA114_CLK_PLL_U_60M 224 +#define TEGRA114_CLK_PLL_U_48M 225 +#define TEGRA114_CLK_PLL_U_12M 226 +#define TEGRA114_CLK_PLL_X 227 +#define TEGRA114_CLK_PLL_X_OUT0 228 +#define TEGRA114_CLK_PLL_RE_VCO 229 +#define TEGRA114_CLK_PLL_RE_OUT 230 +#define TEGRA114_CLK_PLL_E_OUT0 231 +#define TEGRA114_CLK_SPDIF_IN_SYNC 232 +#define TEGRA114_CLK_I2S0_SYNC 233 +#define TEGRA114_CLK_I2S1_SYNC 234 +#define TEGRA114_CLK_I2S2_SYNC 235 +#define TEGRA114_CLK_I2S3_SYNC 236 +#define TEGRA114_CLK_I2S4_SYNC 237 +#define TEGRA114_CLK_VIMCLK_SYNC 238 +#define TEGRA114_CLK_AUDIO0 239 +#define TEGRA114_CLK_AUDIO1 240 +#define TEGRA114_CLK_AUDIO2 241 +#define TEGRA114_CLK_AUDIO3 242 +#define TEGRA114_CLK_AUDIO4 243 +#define TEGRA114_CLK_SPDIF 244 +#define TEGRA114_CLK_CLK_OUT_1 245 +#define TEGRA114_CLK_CLK_OUT_2 246 +#define TEGRA114_CLK_CLK_OUT_3 247 +#define TEGRA114_CLK_BLINK 248 +/* 249 */ +/* 250 */ +/* 251 */ +#define TEGRA114_CLK_XUSB_HOST_SRC 252 +#define TEGRA114_CLK_XUSB_FALCON_SRC 253 +#define TEGRA114_CLK_XUSB_FS_SRC 254 +#define TEGRA114_CLK_XUSB_SS_SRC 255 + +#define TEGRA114_CLK_XUSB_DEV_SRC 256 +#define TEGRA114_CLK_XUSB_DEV 257 +#define TEGRA114_CLK_XUSB_HS_SRC 258 +#define TEGRA114_CLK_SCLK 259 +#define TEGRA114_CLK_HCLK 260 +#define TEGRA114_CLK_PCLK 261 +#define TEGRA114_CLK_CCLK_G 262 +#define TEGRA114_CLK_CCLK_LP 263 +/* 264 */ +/* 265 */ +/* 266 */ +/* 267 */ +/* 268 */ +/* 269 */ +/* 270 */ +/* 271 */ +/* 272 */ +/* 273 */ +/* 274 */ +/* 275 */ +/* 276 */ +/* 277 */ +/* 278 */ +/* 279 */ +/* 280 */ +/* 281 */ +/* 282 */ +/* 283 */ +/* 284 */ +/* 285 */ +/* 286 */ +/* 287 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA114_CLK_AUDIO0_MUX 300 +#define TEGRA114_CLK_AUDIO1_MUX 301 +#define TEGRA114_CLK_AUDIO2_MUX 302 +#define TEGRA114_CLK_AUDIO3_MUX 303 +#define TEGRA114_CLK_AUDIO4_MUX 304 +#define TEGRA114_CLK_SPDIF_MUX 305 +#define TEGRA114_CLK_CLK_OUT_1_MUX 306 +#define TEGRA114_CLK_CLK_OUT_2_MUX 307 +#define TEGRA114_CLK_CLK_OUT_3_MUX 308 +#define TEGRA114_CLK_DSIA_MUX 309 +#define TEGRA114_CLK_DSIB_MUX 310 +#define TEGRA114_CLK_CLK_MAX 311 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h new file mode 100644 index 000000000000..a1ae9a8fdd6c --- /dev/null +++ b/include/dt-bindings/clock/tegra20-car.h @@ -0,0 +1,158 @@ +/* + * This header provides constants for binding nvidia,tegra20-car. + * + * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 95 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 96 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H + +#define TEGRA20_CLK_CPU 0 +/* 1 */ +/* 2 */ +#define TEGRA20_CLK_AC97 3 +#define TEGRA20_CLK_RTC 4 +#define TEGRA20_CLK_TIMER 5 +#define TEGRA20_CLK_UARTA 6 +/* 7 (register bit affects uart2 and vfir) */ +#define TEGRA20_CLK_GPIO 8 +#define TEGRA20_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA20_CLK_I2S1 11 +#define TEGRA20_CLK_I2C1 12 +#define TEGRA20_CLK_NDFLASH 13 +#define TEGRA20_CLK_SDMMC1 14 +#define TEGRA20_CLK_SDMMC4 15 +#define TEGRA20_CLK_TWC 16 +#define TEGRA20_CLK_PWM 17 +#define TEGRA20_CLK_I2S2 18 +#define TEGRA20_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA20_CLK_GR2D 21 +#define TEGRA20_CLK_USBD 22 +#define TEGRA20_CLK_ISP 23 +#define TEGRA20_CLK_GR3D 24 +#define TEGRA20_CLK_IDE 25 +#define TEGRA20_CLK_DISP2 26 +#define TEGRA20_CLK_DISP1 27 +#define TEGRA20_CLK_HOST1X 28 +#define TEGRA20_CLK_VCP 29 +/* 30 */ +#define TEGRA20_CLK_CACHE2 31 + +#define TEGRA20_CLK_MEM 32 +#define TEGRA20_CLK_AHBDMA 33 +#define TEGRA20_CLK_APBDMA 34 +/* 35 */ +#define TEGRA20_CLK_KBC 36 +#define TEGRA20_CLK_STAT_MON 37 +#define TEGRA20_CLK_PMC 38 +#define TEGRA20_CLK_FUSE 39 +#define TEGRA20_CLK_KFUSE 40 +#define TEGRA20_CLK_SBC1 41 +#define TEGRA20_CLK_NOR 42 +#define TEGRA20_CLK_SPI 43 +#define TEGRA20_CLK_SBC2 44 +#define TEGRA20_CLK_XIO 45 +#define TEGRA20_CLK_SBC3 46 +#define TEGRA20_CLK_DVC 47 +#define TEGRA20_CLK_DSI 48 +/* 49 (register bit affects tvo and cve) */ +#define TEGRA20_CLK_MIPI 50 +#define TEGRA20_CLK_HDMI 51 +#define TEGRA20_CLK_CSI 52 +#define TEGRA20_CLK_TVDAC 53 +#define TEGRA20_CLK_I2C2 54 +#define TEGRA20_CLK_UARTC 55 +/* 56 */ +#define TEGRA20_CLK_EMC 57 +#define TEGRA20_CLK_USB2 58 +#define TEGRA20_CLK_USB3 59 +#define TEGRA20_CLK_MPE 60 +#define TEGRA20_CLK_VDE 61 +#define TEGRA20_CLK_BSEA 62 +#define TEGRA20_CLK_BSEV 63 + +#define TEGRA20_CLK_SPEEDO 64 +#define TEGRA20_CLK_UARTD 65 +#define TEGRA20_CLK_UARTE 66 +#define TEGRA20_CLK_I2C3 67 +#define TEGRA20_CLK_SBC4 68 +#define TEGRA20_CLK_SDMMC3 69 +#define TEGRA20_CLK_PEX 70 +#define TEGRA20_CLK_OWR 71 +#define TEGRA20_CLK_AFI 72 +#define TEGRA20_CLK_CSITE 73 +#define TEGRA20_CLK_PCIE_XCLK 74 +#define TEGRA20_CLK_AVPUCQ 75 +#define TEGRA20_CLK_LA 76 +/* 77 */ +/* 78 */ +/* 79 */ +/* 80 */ +/* 81 */ +/* 82 */ +/* 83 */ +#define TEGRA20_CLK_IRAMA 84 +#define TEGRA20_CLK_IRAMB 85 +#define TEGRA20_CLK_IRAMC 86 +#define TEGRA20_CLK_IRAMD 87 +#define TEGRA20_CLK_CRAM2 88 +#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */ +#define TEGRA20_CLK_CLK_D 90 +/* 91 */ +#define TEGRA20_CLK_CSUS 92 +#define TEGRA20_CLK_CDEV2 93 +#define TEGRA20_CLK_CDEV1 94 +/* 95 */ + +#define TEGRA20_CLK_UARTB 96 +#define TEGRA20_CLK_VFIR 97 +#define TEGRA20_CLK_SPDIF_IN 98 +#define TEGRA20_CLK_SPDIF_OUT 99 +#define TEGRA20_CLK_VI 100 +#define TEGRA20_CLK_VI_SENSOR 101 +#define TEGRA20_CLK_TVO 102 +#define TEGRA20_CLK_CVE 103 +#define TEGRA20_CLK_OSC 104 +#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */ +#define TEGRA20_CLK_CLK_M 106 +#define TEGRA20_CLK_SCLK 107 +#define TEGRA20_CLK_CCLK 108 +#define TEGRA20_CLK_HCLK 109 +#define TEGRA20_CLK_PCLK 110 +#define TEGRA20_CLK_BLINK 111 +#define TEGRA20_CLK_PLL_A 112 +#define TEGRA20_CLK_PLL_A_OUT0 113 +#define TEGRA20_CLK_PLL_C 114 +#define TEGRA20_CLK_PLL_C_OUT1 115 +#define TEGRA20_CLK_PLL_D 116 +#define TEGRA20_CLK_PLL_D_OUT0 117 +#define TEGRA20_CLK_PLL_E 118 +#define TEGRA20_CLK_PLL_M 119 +#define TEGRA20_CLK_PLL_M_OUT1 120 +#define TEGRA20_CLK_PLL_P 121 +#define TEGRA20_CLK_PLL_P_OUT1 122 +#define TEGRA20_CLK_PLL_P_OUT2 123 +#define TEGRA20_CLK_PLL_P_OUT3 124 +#define TEGRA20_CLK_PLL_P_OUT4 125 +#define TEGRA20_CLK_PLL_S 126 +#define TEGRA20_CLK_PLL_U 127 + +#define TEGRA20_CLK_PLL_X 128 +#define TEGRA20_CLK_COP 129 /* a/k/a avp */ +#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */ +#define TEGRA20_CLK_PLL_REF 131 +#define TEGRA20_CLK_TWD 132 +#define TEGRA20_CLK_CLK_MAX 133 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h new file mode 100644 index 000000000000..e40fae8f9a8d --- /dev/null +++ b/include/dt-bindings/clock/tegra30-car.h @@ -0,0 +1,265 @@ +/* + * This header provides constants for binding nvidia,tegra30-car. + * + * The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 160 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 160 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA30_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA30_CAR_H + +#define TEGRA30_CLK_CPU 0 +/* 1 */ +/* 2 */ +/* 3 */ +#define TEGRA30_CLK_RTC 4 +#define TEGRA30_CLK_TIMER 5 +#define TEGRA30_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +#define TEGRA30_CLK_GPIO 8 +#define TEGRA30_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA30_CLK_I2S1 11 +#define TEGRA30_CLK_I2C1 12 +#define TEGRA30_CLK_NDFLASH 13 +#define TEGRA30_CLK_SDMMC1 14 +#define TEGRA30_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA30_CLK_PWM 17 +#define TEGRA30_CLK_I2S2 18 +#define TEGRA30_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA30_CLK_GR2D 21 +#define TEGRA30_CLK_USBD 22 +#define TEGRA30_CLK_ISP 23 +#define TEGRA30_CLK_GR3D 24 +/* 25 */ +#define TEGRA30_CLK_DISP2 26 +#define TEGRA30_CLK_DISP1 27 +#define TEGRA30_CLK_HOST1X 28 +#define TEGRA30_CLK_VCP 29 +#define TEGRA30_CLK_I2S0 30 +#define TEGRA30_CLK_COP_CACHE 31 + +#define TEGRA30_CLK_MC 32 +#define TEGRA30_CLK_AHBDMA 33 +#define TEGRA30_CLK_APBDMA 34 +/* 35 */ +#define TEGRA30_CLK_KBC 36 +#define TEGRA30_CLK_STATMON 37 +#define TEGRA30_CLK_PMC 38 +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA30_CLK_KFUSE 40 +#define TEGRA30_CLK_SBC1 41 +#define TEGRA30_CLK_NOR 42 +/* 43 */ +#define TEGRA30_CLK_SBC2 44 +/* 45 */ +#define TEGRA30_CLK_SBC3 46 +#define TEGRA30_CLK_I2C5 47 +#define TEGRA30_CLK_DSIA 48 +/* 49 (register bit affects cve and tvo) */ +#define TEGRA30_CLK_MIPI 50 +#define TEGRA30_CLK_HDMI 51 +#define TEGRA30_CLK_CSI 52 +#define TEGRA30_CLK_TVDAC 53 +#define TEGRA30_CLK_I2C2 54 +#define TEGRA30_CLK_UARTC 55 +/* 56 */ +#define TEGRA30_CLK_EMC 57 +#define TEGRA30_CLK_USB2 58 +#define TEGRA30_CLK_USB3 59 +#define TEGRA30_CLK_MPE 60 +#define TEGRA30_CLK_VDE 61 +#define TEGRA30_CLK_BSEA 62 +#define TEGRA30_CLK_BSEV 63 + +#define TEGRA30_CLK_SPEEDO 64 +#define TEGRA30_CLK_UARTD 65 +#define TEGRA30_CLK_UARTE 66 +#define TEGRA30_CLK_I2C3 67 +#define TEGRA30_CLK_SBC4 68 +#define TEGRA30_CLK_SDMMC3 69 +#define TEGRA30_CLK_PCIE 70 +#define TEGRA30_CLK_OWR 71 +#define TEGRA30_CLK_AFI 72 +#define TEGRA30_CLK_CSITE 73 +#define TEGRA30_CLK_PCIEX 74 +#define TEGRA30_CLK_AVPUCQ 75 +#define TEGRA30_CLK_LA 76 +/* 77 */ +/* 78 */ +#define TEGRA30_CLK_DTV 79 +#define TEGRA30_CLK_NDSPEED 80 +#define TEGRA30_CLK_I2CSLOW 81 +#define TEGRA30_CLK_DSIB 82 +/* 83 */ +#define TEGRA30_CLK_IRAMA 84 +#define TEGRA30_CLK_IRAMB 85 +#define TEGRA30_CLK_IRAMC 86 +#define TEGRA30_CLK_IRAMD 87 +#define TEGRA30_CLK_CRAM2 88 +/* 89 */ +#define TEGRA30_CLK_AUDIO_2X 90 /* a/k/a audio_2x_sync_clk */ +/* 91 */ +#define TEGRA30_CLK_CSUS 92 +#define TEGRA30_CLK_CDEV2 93 +#define TEGRA30_CLK_CDEV1 94 +/* 95 */ + +#define TEGRA30_CLK_CPU_G 96 +#define TEGRA30_CLK_CPU_LP 97 +#define TEGRA30_CLK_GR3D2 98 +#define TEGRA30_CLK_MSELECT 99 +#define TEGRA30_CLK_TSENSOR 100 +#define TEGRA30_CLK_I2S3 101 +#define TEGRA30_CLK_I2S4 102 +#define TEGRA30_CLK_I2C4 103 +#define TEGRA30_CLK_SBC5 104 +#define TEGRA30_CLK_SBC6 105 +#define TEGRA30_CLK_D_AUDIO 106 +#define TEGRA30_CLK_APBIF 107 +#define TEGRA30_CLK_DAM0 108 +#define TEGRA30_CLK_DAM1 109 +#define TEGRA30_CLK_DAM2 110 +#define TEGRA30_CLK_HDA2CODEC_2X 111 +#define TEGRA30_CLK_ATOMICS 112 +#define TEGRA30_CLK_AUDIO0_2X 113 +#define TEGRA30_CLK_AUDIO1_2X 114 +#define TEGRA30_CLK_AUDIO2_2X 115 +#define TEGRA30_CLK_AUDIO3_2X 116 +#define TEGRA30_CLK_AUDIO4_2X 117 +#define TEGRA30_CLK_SPDIF_2X 118 +#define TEGRA30_CLK_ACTMON 119 +#define TEGRA30_CLK_EXTERN1 120 +#define TEGRA30_CLK_EXTERN2 121 +#define TEGRA30_CLK_EXTERN3 122 +#define TEGRA30_CLK_SATA_OOB 123 +#define TEGRA30_CLK_SATA 124 +#define TEGRA30_CLK_HDA 125 +/* 126 */ +#define TEGRA30_CLK_SE 127 + +#define TEGRA30_CLK_HDA2HDMI 128 +#define TEGRA30_CLK_SATA_COLD 129 +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 */ +/* 144 */ +/* 145 */ +/* 146 */ +/* 147 */ +/* 148 */ +/* 149 */ +/* 150 */ +/* 151 */ +/* 152 */ +/* 153 */ +/* 154 */ +/* 155 */ +/* 156 */ +/* 157 */ +/* 158 */ +/* 159 */ + +#define TEGRA30_CLK_UARTB 160 +#define TEGRA30_CLK_VFIR 161 +#define TEGRA30_CLK_SPDIF_IN 162 +#define TEGRA30_CLK_SPDIF_OUT 163 +#define TEGRA30_CLK_VI 164 +#define TEGRA30_CLK_VI_SENSOR 165 +#define TEGRA30_CLK_FUSE 166 +#define TEGRA30_CLK_FUSE_BURN 167 +#define TEGRA30_CLK_CVE 168 +#define TEGRA30_CLK_TVO 169 +#define TEGRA30_CLK_CLK_32K 170 +#define TEGRA30_CLK_CLK_M 171 +#define TEGRA30_CLK_CLK_M_DIV2 172 +#define TEGRA30_CLK_CLK_M_DIV4 173 +#define TEGRA30_CLK_PLL_REF 174 +#define TEGRA30_CLK_PLL_C 175 +#define TEGRA30_CLK_PLL_C_OUT1 176 +#define TEGRA30_CLK_PLL_M 177 +#define TEGRA30_CLK_PLL_M_OUT1 178 +#define TEGRA30_CLK_PLL_P 179 +#define TEGRA30_CLK_PLL_P_OUT1 180 +#define TEGRA30_CLK_PLL_P_OUT2 181 +#define TEGRA30_CLK_PLL_P_OUT3 182 +#define TEGRA30_CLK_PLL_P_OUT4 183 +#define TEGRA30_CLK_PLL_A 184 +#define TEGRA30_CLK_PLL_A_OUT0 185 +#define TEGRA30_CLK_PLL_D 186 +#define TEGRA30_CLK_PLL_D_OUT0 187 +#define TEGRA30_CLK_PLL_D2 188 +#define TEGRA30_CLK_PLL_D2_OUT0 189 +#define TEGRA30_CLK_PLL_U 190 +#define TEGRA30_CLK_PLL_X 191 + +#define TEGRA30_CLK_PLL_X_OUT0 192 +#define TEGRA30_CLK_PLL_E 193 +#define TEGRA30_CLK_SPDIF_IN_SYNC 194 +#define TEGRA30_CLK_I2S0_SYNC 195 +#define TEGRA30_CLK_I2S1_SYNC 196 +#define TEGRA30_CLK_I2S2_SYNC 197 +#define TEGRA30_CLK_I2S3_SYNC 198 +#define TEGRA30_CLK_I2S4_SYNC 199 +#define TEGRA30_CLK_VIMCLK_SYNC 200 +#define TEGRA30_CLK_AUDIO0 201 +#define TEGRA30_CLK_AUDIO1 202 +#define TEGRA30_CLK_AUDIO2 203 +#define TEGRA30_CLK_AUDIO3 204 +#define TEGRA30_CLK_AUDIO4 205 +#define TEGRA30_CLK_SPDIF 206 +#define TEGRA30_CLK_CLK_OUT_1 207 /* (extern1) */ +#define TEGRA30_CLK_CLK_OUT_2 208 /* (extern2) */ +#define TEGRA30_CLK_CLK_OUT_3 209 /* (extern3) */ +#define TEGRA30_CLK_SCLK 210 +#define TEGRA30_CLK_BLINK 211 +#define TEGRA30_CLK_CCLK_G 212 +#define TEGRA30_CLK_CCLK_LP 213 +#define TEGRA30_CLK_TWD 214 +#define TEGRA30_CLK_CML0 215 +#define TEGRA30_CLK_CML1 216 +#define TEGRA30_CLK_HCLK 217 +#define TEGRA30_CLK_PCLK 218 +/* 219 */ +/* 220 */ +/* 221 */ +/* 222 */ +/* 223 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA30_CLK_CLK_OUT_1_MUX 300 +#define TEGRA30_CLK_CLK_MAX 301 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */ diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h new file mode 100644 index 000000000000..15e997fa78f2 --- /dev/null +++ b/include/dt-bindings/clock/vf610-clock.h @@ -0,0 +1,163 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_VF610_H +#define __DT_BINDINGS_CLOCK_VF610_H + +#define VF610_CLK_DUMMY 0 +#define VF610_CLK_SIRC_128K 1 +#define VF610_CLK_SIRC_32K 2 +#define VF610_CLK_FIRC 3 +#define VF610_CLK_SXOSC 4 +#define VF610_CLK_FXOSC 5 +#define VF610_CLK_FXOSC_HALF 6 +#define VF610_CLK_SLOW_CLK_SEL 7 +#define VF610_CLK_FASK_CLK_SEL 8 +#define VF610_CLK_AUDIO_EXT 9 +#define VF610_CLK_ENET_EXT 10 +#define VF610_CLK_PLL1_MAIN 11 +#define VF610_CLK_PLL1_PFD1 12 +#define VF610_CLK_PLL1_PFD2 13 +#define VF610_CLK_PLL1_PFD3 14 +#define VF610_CLK_PLL1_PFD4 15 +#define VF610_CLK_PLL2_MAIN 16 +#define VF610_CLK_PLL2_PFD1 17 +#define VF610_CLK_PLL2_PFD2 18 +#define VF610_CLK_PLL2_PFD3 19 +#define VF610_CLK_PLL2_PFD4 20 +#define VF610_CLK_PLL3_MAIN 21 +#define VF610_CLK_PLL3_PFD1 22 +#define VF610_CLK_PLL3_PFD2 23 +#define VF610_CLK_PLL3_PFD3 24 +#define VF610_CLK_PLL3_PFD4 25 +#define VF610_CLK_PLL4_MAIN 26 +#define VF610_CLK_PLL5_MAIN 27 +#define VF610_CLK_PLL6_MAIN 28 +#define VF610_CLK_PLL3_MAIN_DIV 29 +#define VF610_CLK_PLL4_MAIN_DIV 30 +#define VF610_CLK_PLL6_MAIN_DIV 31 +#define VF610_CLK_PLL1_PFD_SEL 32 +#define VF610_CLK_PLL2_PFD_SEL 33 +#define VF610_CLK_SYS_SEL 34 +#define VF610_CLK_DDR_SEL 35 +#define VF610_CLK_SYS_BUS 36 +#define VF610_CLK_PLATFORM_BUS 37 +#define VF610_CLK_IPG_BUS 38 +#define VF610_CLK_UART0 39 +#define VF610_CLK_UART1 40 +#define VF610_CLK_UART2 41 +#define VF610_CLK_UART3 42 +#define VF610_CLK_UART4 43 +#define VF610_CLK_UART5 44 +#define VF610_CLK_PIT 45 +#define VF610_CLK_I2C0 46 +#define VF610_CLK_I2C1 47 +#define VF610_CLK_I2C2 48 +#define VF610_CLK_I2C3 49 +#define VF610_CLK_FTM0_EXT_SEL 50 +#define VF610_CLK_FTM0_FIX_SEL 51 +#define VF610_CLK_FTM0_EXT_FIX_EN 52 +#define VF610_CLK_FTM1_EXT_SEL 53 +#define VF610_CLK_FTM1_FIX_SEL 54 +#define VF610_CLK_FTM1_EXT_FIX_EN 55 +#define VF610_CLK_FTM2_EXT_SEL 56 +#define VF610_CLK_FTM2_FIX_SEL 57 +#define VF610_CLK_FTM2_EXT_FIX_EN 58 +#define VF610_CLK_FTM3_EXT_SEL 59 +#define VF610_CLK_FTM3_FIX_SEL 60 +#define VF610_CLK_FTM3_EXT_FIX_EN 61 +#define VF610_CLK_FTM0 62 +#define VF610_CLK_FTM1 63 +#define VF610_CLK_FTM2 64 +#define VF610_CLK_FTM3 65 +#define VF610_CLK_ENET_50M 66 +#define VF610_CLK_ENET_25M 67 +#define VF610_CLK_ENET_SEL 68 +#define VF610_CLK_ENET 69 +#define VF610_CLK_ENET_TS_SEL 70 +#define VF610_CLK_ENET_TS 71 +#define VF610_CLK_DSPI0 72 +#define VF610_CLK_DSPI1 73 +#define VF610_CLK_DSPI2 74 +#define VF610_CLK_DSPI3 75 +#define VF610_CLK_WDT 76 +#define VF610_CLK_ESDHC0_SEL 77 +#define VF610_CLK_ESDHC0_EN 78 +#define VF610_CLK_ESDHC0_DIV 79 +#define VF610_CLK_ESDHC0 80 +#define VF610_CLK_ESDHC1_SEL 81 +#define VF610_CLK_ESDHC1_EN 82 +#define VF610_CLK_ESDHC1_DIV 83 +#define VF610_CLK_ESDHC1 84 +#define VF610_CLK_DCU0_SEL 85 +#define VF610_CLK_DCU0_EN 86 +#define VF610_CLK_DCU0_DIV 87 +#define VF610_CLK_DCU0 88 +#define VF610_CLK_DCU1_SEL 89 +#define VF610_CLK_DCU1_EN 90 +#define VF610_CLK_DCU1_DIV 91 +#define VF610_CLK_DCU1 92 +#define VF610_CLK_ESAI_SEL 93 +#define VF610_CLK_ESAI_EN 94 +#define VF610_CLK_ESAI_DIV 95 +#define VF610_CLK_ESAI 96 +#define VF610_CLK_SAI0_SEL 97 +#define VF610_CLK_SAI0_EN 98 +#define VF610_CLK_SAI0_DIV 99 +#define VF610_CLK_SAI0 100 +#define VF610_CLK_SAI1_SEL 101 +#define VF610_CLK_SAI1_EN 102 +#define VF610_CLK_SAI1_DIV 103 +#define VF610_CLK_SAI1 104 +#define VF610_CLK_SAI2_SEL 105 +#define VF610_CLK_SAI2_EN 106 +#define VF610_CLK_SAI2_DIV 107 +#define VF610_CLK_SAI2 108 +#define VF610_CLK_SAI3_SEL 109 +#define VF610_CLK_SAI3_EN 110 +#define VF610_CLK_SAI3_DIV 111 +#define VF610_CLK_SAI3 112 +#define VF610_CLK_USBC0 113 +#define VF610_CLK_USBC1 114 +#define VF610_CLK_QSPI0_SEL 115 +#define VF610_CLK_QSPI0_EN 116 +#define VF610_CLK_QSPI0_X4_DIV 117 +#define VF610_CLK_QSPI0_X2_DIV 118 +#define VF610_CLK_QSPI0_X1_DIV 119 +#define VF610_CLK_QSPI1_SEL 120 +#define VF610_CLK_QSPI1_EN 121 +#define VF610_CLK_QSPI1_X4_DIV 122 +#define VF610_CLK_QSPI1_X2_DIV 123 +#define VF610_CLK_QSPI1_X1_DIV 124 +#define VF610_CLK_QSPI0 125 +#define VF610_CLK_QSPI1 126 +#define VF610_CLK_NFC_SEL 127 +#define VF610_CLK_NFC_EN 128 +#define VF610_CLK_NFC_PRE_DIV 129 +#define VF610_CLK_NFC_FRAC_DIV 130 +#define VF610_CLK_NFC_INV 131 +#define VF610_CLK_NFC 132 +#define VF610_CLK_VADC_SEL 133 +#define VF610_CLK_VADC_EN 134 +#define VF610_CLK_VADC_DIV 135 +#define VF610_CLK_VADC_DIV_HALF 136 +#define VF610_CLK_VADC 137 +#define VF610_CLK_ADC0 138 +#define VF610_CLK_ADC1 139 +#define VF610_CLK_DAC0 140 +#define VF610_CLK_DAC1 141 +#define VF610_CLK_FLEXCAN0 142 +#define VF610_CLK_FLEXCAN1 143 +#define VF610_CLK_ASRC 144 +#define VF610_CLK_GPU_SEL 145 +#define VF610_CLK_GPU_EN 146 +#define VF610_CLK_GPU2D 147 +#define VF610_CLK_END 148 + +#endif /* __DT_BINDINGS_CLOCK_VF610_H */ diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h new file mode 100644 index 000000000000..e835037a77b4 --- /dev/null +++ b/include/dt-bindings/dma/at91.h @@ -0,0 +1,27 @@ +/* + * This header provides macros for at91 dma bindings. + * + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_DMA_H__ +#define __DT_BINDINGS_AT91_DMA_H__ + +/* + * Source and/or destination peripheral ID + */ +#define AT91_DMA_CFG_PER_ID_MASK (0xff) +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) + +/* + * FIFO configuration: it defines when a request is serviced. + */ +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ + +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h new file mode 100644 index 000000000000..4d179c00f081 --- /dev/null +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -0,0 +1,50 @@ +/* + * This header provides constants for binding nvidia,tegra*-gpio. + * + * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below + * provide names for this. + * + * The second cell contains standard flag values specified in gpio.h. + */ + +#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H + +#include <dt-bindings/gpio/gpio.h> + +#define TEGRA_GPIO_BANK_ID_A 0 +#define TEGRA_GPIO_BANK_ID_B 1 +#define TEGRA_GPIO_BANK_ID_C 2 +#define TEGRA_GPIO_BANK_ID_D 3 +#define TEGRA_GPIO_BANK_ID_E 4 +#define TEGRA_GPIO_BANK_ID_F 5 +#define TEGRA_GPIO_BANK_ID_G 6 +#define TEGRA_GPIO_BANK_ID_H 7 +#define TEGRA_GPIO_BANK_ID_I 8 +#define TEGRA_GPIO_BANK_ID_J 9 +#define TEGRA_GPIO_BANK_ID_K 10 +#define TEGRA_GPIO_BANK_ID_L 11 +#define TEGRA_GPIO_BANK_ID_M 12 +#define TEGRA_GPIO_BANK_ID_N 13 +#define TEGRA_GPIO_BANK_ID_O 14 +#define TEGRA_GPIO_BANK_ID_P 15 +#define TEGRA_GPIO_BANK_ID_Q 16 +#define TEGRA_GPIO_BANK_ID_R 17 +#define TEGRA_GPIO_BANK_ID_S 18 +#define TEGRA_GPIO_BANK_ID_T 19 +#define TEGRA_GPIO_BANK_ID_U 20 +#define TEGRA_GPIO_BANK_ID_V 21 +#define TEGRA_GPIO_BANK_ID_W 22 +#define TEGRA_GPIO_BANK_ID_X 23 +#define TEGRA_GPIO_BANK_ID_Y 24 +#define TEGRA_GPIO_BANK_ID_Z 25 +#define TEGRA_GPIO_BANK_ID_AA 26 +#define TEGRA_GPIO_BANK_ID_BB 27 +#define TEGRA_GPIO_BANK_ID_CC 28 +#define TEGRA_GPIO_BANK_ID_DD 29 +#define TEGRA_GPIO_BANK_ID_EE 30 + +#define TEGRA_GPIO(bank, offset) \ + ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) + +#endif diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h new file mode 100644 index 000000000000..d7988b4d8af9 --- /dev/null +++ b/include/dt-bindings/pinctrl/at91.h @@ -0,0 +1,35 @@ +/* + * This header provides constants for most at91 pinctrl bindings. + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_PINCTRL_H__ +#define __DT_BINDINGS_AT91_PINCTRL_H__ + +#define AT91_PINCTRL_NONE (0 << 0) +#define AT91_PINCTRL_PULL_UP (1 << 0) +#define AT91_PINCTRL_MULTI_DRIVE (1 << 1) +#define AT91_PINCTRL_DEGLITCH (1 << 2) +#define AT91_PINCTRL_PULL_DOWN (1 << 3) +#define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_DEBOUNCE (1 << 16) +#define AT91_PINCTRL_DEBOUNCE_VA(x) (x << 17) + +#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) + +#define AT91_PIOA 0 +#define AT91_PIOB 1 +#define AT91_PIOC 2 +#define AT91_PIOD 3 +#define AT91_PIOE 4 + +#define AT91_PERIPH_GPIO 0 +#define AT91_PERIPH_A 1 +#define AT91_PERIPH_B 2 +#define AT91_PERIPH_C 3 +#define AT91_PERIPH_D 4 + +#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */ diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h index 56be7cd9aa8b..e062d317ccce 100644 --- a/include/linux/clk/zynq.h +++ b/include/linux/clk/zynq.h @@ -1,4 +1,5 @@ /* + * Copyright (C) 2013 Xilinx Inc. * Copyright (C) 2012 National Instruments * * This program is free software; you can redistribute it and/or modify @@ -19,6 +20,11 @@ #ifndef __LINUX_CLK_ZYNQ_H_ #define __LINUX_CLK_ZYNQ_H_ -void __init xilinx_zynq_clocks_init(void __iomem *slcr); +#include <linux/spinlock.h> +void zynq_clock_init(void __iomem *slcr); + +struct clk *clk_register_zynq_pll(const char *name, const char *parent, + void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, + spinlock_t *lock); #endif diff --git a/include/linux/cpu.h b/include/linux/cpu.h index c6f6e0839b61..9f3c7e81270a 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys; extern void get_online_cpus(void); extern void put_online_cpus(void); +extern void cpu_hotplug_disable(void); +extern void cpu_hotplug_enable(void); #define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri) #define register_hotcpu_notifier(nb) register_cpu_notifier(nb) #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb) @@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void) #define get_online_cpus() do { } while (0) #define put_online_cpus() do { } while (0) +#define cpu_hotplug_disable() do { } while (0) +#define cpu_hotplug_enable() do { } while (0) #define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0) /* These aren't inline functions due to a GCC bug. */ #define register_hotcpu_notifier(nb) ({ (void)(nb); 0; }) diff --git a/include/linux/filter.h b/include/linux/filter.h index c050dcc322a4..f65f5a69db8f 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -46,6 +46,7 @@ extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); +extern void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to); #ifdef CONFIG_BPF_JIT #include <stdarg.h> diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 4474557904f6..16fae6436d0e 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -249,12 +249,12 @@ team_get_first_port_txable_rcu(struct team *team, struct team_port *port) return port; cur = port; list_for_each_entry_continue_rcu(cur, &team->port_list, list) - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; list_for_each_entry_rcu(cur, &team->port_list, list) { if (cur == port) break; - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; } return NULL; diff --git a/include/linux/math64.h b/include/linux/math64.h index b8ba85544721..2913b86eb12a 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -6,7 +6,8 @@ #if BITS_PER_LONG == 64 -#define div64_long(x,y) div64_s64((x),(y)) +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder @@ -47,7 +48,8 @@ static inline s64 div64_s64(s64 dividend, s64 divisor) #elif BITS_PER_LONG == 32 -#define div64_long(x,y) div_s64((x),(y)) +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 5951e3f38878..26806775b11b 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -111,6 +111,9 @@ static inline struct page *sg_page(struct scatterlist *sg) static inline void sg_set_buf(struct scatterlist *sg, const void *buf, unsigned int buflen) { +#ifdef CONFIG_DEBUG_SG + BUG_ON(!virt_addr_valid(buf)); +#endif sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); } diff --git a/include/linux/smp.h b/include/linux/smp.h index e6564c1dc552..c8488763277f 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -11,6 +11,7 @@ #include <linux/list.h> #include <linux/cpumask.h> #include <linux/init.h> +#include <linux/irqflags.h> extern void cpu_idle(void); @@ -139,13 +140,17 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } #define smp_call_function(func, info, wait) \ (up_smp_call_function(func, info)) -#define on_each_cpu(func,info,wait) \ - ({ \ - local_irq_disable(); \ - func(info); \ - local_irq_enable(); \ - 0; \ - }) + +static inline int on_each_cpu(smp_call_func_t func, void *info, int wait) +{ + unsigned long flags; + + local_irq_save(flags); + func(info); + local_irq_restore(flags); + return 0; +} + /* * Note we still need to test the mask even for UP * because we actually can get an empty mask from diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 47ead515c811..c5fd30d2a415 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -137,6 +137,7 @@ static inline void make_migration_entry_read(swp_entry_t *entry) extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address); +extern void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte); #else #define make_migration_entry(page, write) swp_entry(0, 0) @@ -148,6 +149,8 @@ static inline int is_migration_entry(swp_entry_t swp) static inline void make_migration_entry_read(swp_entry_t *entryp) { } static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address) { } +static inline void migration_entry_wait_huge(struct mm_struct *mm, + pte_t *pte) { } static inline int is_write_migration_entry(swp_entry_t entry) { return 0; diff --git a/include/linux/syslog.h b/include/linux/syslog.h index 38911391a139..98a3153c0f96 100644 --- a/include/linux/syslog.h +++ b/include/linux/syslog.h @@ -44,8 +44,8 @@ /* Return size of the log buffer */ #define SYSLOG_ACTION_SIZE_BUFFER 10 -#define SYSLOG_FROM_CALL 0 -#define SYSLOG_FROM_FILE 1 +#define SYSLOG_FROM_READER 0 +#define SYSLOG_FROM_PROC 1 int do_syslog(int type, char __user *buf, int count, bool from_file); diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 2f322c38bd4d..f8e084d0fc77 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -145,8 +145,8 @@ static inline void tracepoint_synchronize_unregister(void) TP_PROTO(data_proto), \ TP_ARGS(data_args), \ TP_CONDITION(cond), \ - rcu_idle_exit(), \ - rcu_idle_enter()); \ + rcu_irq_enter(), \ + rcu_irq_exit()); \ } #else #define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 35a57cd1704c..7cb6d360d147 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1117,6 +1117,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); +int mgmt_set_powered_failed(struct hci_dev *hdev, int err); int mgmt_powered(struct hci_dev *hdev, u8 powered); int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 22980a7c3873..9944c3e68c5d 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -42,6 +42,7 @@ #define MGMT_STATUS_NOT_POWERED 0x0f #define MGMT_STATUS_CANCELLED 0x10 #define MGMT_STATUS_INVALID_INDEX 0x11 +#define MGMT_STATUS_RFKILLED 0x12 struct mgmt_hdr { __le16 opcode; diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 4b6f0b28f41f..09b1360e10bf 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -95,10 +95,10 @@ struct ip_tunnel_net { int ip_tunnel_init(struct net_device *dev); void ip_tunnel_uninit(struct net_device *dev); void ip_tunnel_dellink(struct net_device *dev, struct list_head *head); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, - struct rtnl_link_ops *ops, char *devname); +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, + struct rtnl_link_ops *ops, char *devname); -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn); +void ip_tunnel_delete_net(struct ip_tunnel_net *itn); void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params); diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d4609029f014..385c6329a967 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -450,7 +450,8 @@ enum snd_soc_dapm_type { snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ - snd_soc_dapm_dai, /* link to DAI structure */ + snd_soc_dapm_dai_in, /* link to DAI structure */ + snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ }; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a5c86fc34a37..d88c8ee00c8b 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -783,6 +783,7 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL diff --git a/init/Kconfig b/init/Kconfig index 9d3a7887a6d3..2d9b83104dcf 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -431,6 +431,7 @@ choice config TREE_RCU bool "Tree-based hierarchical RCU" depends on !PREEMPT && SMP + select IRQ_WORK help This option selects the RCU implementation that is designed for very large SMP system with hundreds or diff --git a/kernel/audit.c b/kernel/audit.c index 21c7fa615bd3..91e53d04b6a9 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1056,7 +1056,7 @@ static inline void audit_get_stamp(struct audit_context *ctx, static void wait_for_auditd(unsigned long sleep_time) { DECLARE_WAITQUEUE(wait, current); - set_current_state(TASK_INTERRUPTIBLE); + set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&audit_backlog_wait, &wait); if (audit_backlog_limit && diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index a291aa23fb3f..43c307dc9453 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -658,6 +658,7 @@ int audit_add_tree_rule(struct audit_krule *rule) struct vfsmount *mnt; int err; + rule->tree = NULL; list_for_each_entry(tree, &tree_list, list) { if (!strcmp(seed->pathname, tree->pathname)) { put_tree(seed); diff --git a/kernel/cpu.c b/kernel/cpu.c index b5e4ab2d427e..198a38883e64 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -133,6 +133,27 @@ static void cpu_hotplug_done(void) mutex_unlock(&cpu_hotplug.lock); } +/* + * Wait for currently running CPU hotplug operations to complete (if any) and + * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects + * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the + * hotplug path before performing hotplug operations. So acquiring that lock + * guarantees mutual exclusion from any currently running hotplug operations. + */ +void cpu_hotplug_disable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 1; + cpu_maps_update_done(); +} + +void cpu_hotplug_enable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 0; + cpu_maps_update_done(); +} + #else /* #if CONFIG_HOTPLUG_CPU */ static void cpu_hotplug_begin(void) {} static void cpu_hotplug_done(void) {} @@ -541,36 +562,6 @@ static int __init alloc_frozen_cpus(void) core_initcall(alloc_frozen_cpus); /* - * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU - * hotplug when tasks are about to be frozen. Also, don't allow the freezer - * to continue until any currently running CPU hotplug operation gets - * completed. - * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the - * 'cpu_add_remove_lock'. And this same lock is also taken by the regular - * CPU hotplug path and released only after it is complete. Thus, we - * (and hence the freezer) will block here until any currently running CPU - * hotplug operation gets completed. - */ -void cpu_hotplug_disable_before_freeze(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 1; - cpu_maps_update_done(); -} - - -/* - * When tasks have been thawed, re-enable regular CPU hotplug (which had been - * disabled while beginning to freeze tasks). - */ -void cpu_hotplug_enable_after_thaw(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; - cpu_maps_update_done(); -} - -/* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen * or not, as reported by the notification, remains unchanged *throughout the @@ -589,12 +580,12 @@ cpu_hotplug_pm_callback(struct notifier_block *nb, case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: - cpu_hotplug_disable_before_freeze(); + cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: - cpu_hotplug_enable_after_thaw(); + cpu_hotplug_enable(); break; default: diff --git a/kernel/exit.c b/kernel/exit.c index af2eb3cbd499..7bb73f9d09db 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -649,7 +649,6 @@ static void exit_notify(struct task_struct *tsk, int group_dead) * jobs, send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2) */ forget_original_parent(tsk); - exit_task_namespaces(tsk); write_lock_irq(&tasklist_lock); if (group_dead) @@ -795,6 +794,7 @@ void do_exit(long code) exit_shm(tsk); exit_files(tsk); exit_fs(tsk); + exit_task_namespaces(tsk); exit_task_work(tsk); check_stack_usage(); exit_thread(); diff --git a/kernel/printk.c b/kernel/printk.c index fa36e1494420..8212c1aef125 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -363,6 +363,53 @@ static void log_store(int facility, int level, log_next_seq++; } +#ifdef CONFIG_SECURITY_DMESG_RESTRICT +int dmesg_restrict = 1; +#else +int dmesg_restrict; +#endif + +static int syslog_action_restricted(int type) +{ + if (dmesg_restrict) + return 1; + /* + * Unless restricted, we allow "read all" and "get buffer size" + * for everybody. + */ + return type != SYSLOG_ACTION_READ_ALL && + type != SYSLOG_ACTION_SIZE_BUFFER; +} + +static int check_syslog_permissions(int type, bool from_file) +{ + /* + * If this is from /proc/kmsg and we've already opened it, then we've + * already done the capabilities checks at open time. + */ + if (from_file && type != SYSLOG_ACTION_OPEN) + return 0; + + if (syslog_action_restricted(type)) { + if (capable(CAP_SYSLOG)) + return 0; + /* + * For historical reasons, accept CAP_SYS_ADMIN too, with + * a warning. + */ + if (capable(CAP_SYS_ADMIN)) { + pr_warn_once("%s (%d): Attempt to access syslog with " + "CAP_SYS_ADMIN but no CAP_SYSLOG " + "(deprecated).\n", + current->comm, task_pid_nr(current)); + return 0; + } + return -EPERM; + } + return security_syslog(type); +} + + /* /dev/kmsg - userspace message inject/listen interface */ struct devkmsg_user { u64 seq; @@ -620,7 +667,8 @@ static int devkmsg_open(struct inode *inode, struct file *file) if ((file->f_flags & O_ACCMODE) == O_WRONLY) return 0; - err = security_syslog(SYSLOG_ACTION_READ_ALL); + err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL, + SYSLOG_FROM_READER); if (err) return err; @@ -813,45 +861,6 @@ static inline void boot_delay_msec(int level) } #endif -#ifdef CONFIG_SECURITY_DMESG_RESTRICT -int dmesg_restrict = 1; -#else -int dmesg_restrict; -#endif - -static int syslog_action_restricted(int type) -{ - if (dmesg_restrict) - return 1; - /* Unless restricted, we allow "read all" and "get buffer size" for everybody */ - return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER; -} - -static int check_syslog_permissions(int type, bool from_file) -{ - /* - * If this is from /proc/kmsg and we've already opened it, then we've - * already done the capabilities checks at open time. - */ - if (from_file && type != SYSLOG_ACTION_OPEN) - return 0; - - if (syslog_action_restricted(type)) { - if (capable(CAP_SYSLOG)) - return 0; - /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */ - if (capable(CAP_SYS_ADMIN)) { - printk_once(KERN_WARNING "%s (%d): " - "Attempt to access syslog with CAP_SYS_ADMIN " - "but no CAP_SYSLOG (deprecated).\n", - current->comm, task_pid_nr(current)); - return 0; - } - return -EPERM; - } - return 0; -} - #if defined(CONFIG_PRINTK_TIME) static bool printk_time = 1; #else @@ -1249,7 +1258,7 @@ out: SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) { - return do_syslog(type, buf, len, SYSLOG_FROM_CALL); + return do_syslog(type, buf, len, SYSLOG_FROM_READER); } /* diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 16ea67925015..35380019f0fc 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1451,9 +1451,9 @@ static int rcu_gp_init(struct rcu_state *rsp) rnp->grphi, rnp->qsmask); raw_spin_unlock_irq(&rnp->lock); #ifdef CONFIG_PROVE_RCU_DELAY - if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 && + if ((prandom_u32() % (rcu_num_nodes + 1)) == 0 && system_state == SYSTEM_RUNNING) - schedule_timeout_uninterruptible(2); + udelay(200); #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */ cond_resched(); } @@ -1613,6 +1613,14 @@ static int __noreturn rcu_gp_kthread(void *arg) } } +static void rsp_wakeup(struct irq_work *work) +{ + struct rcu_state *rsp = container_of(work, struct rcu_state, wakeup_work); + + /* Wake up rcu_gp_kthread() to start the grace period. */ + wake_up(&rsp->gp_wq); +} + /* * Start a new RCU grace period if warranted, re-initializing the hierarchy * in preparation for detecting the next grace period. The caller must hold @@ -1637,8 +1645,12 @@ rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp, } rsp->gp_flags = RCU_GP_FLAG_INIT; - /* Wake up rcu_gp_kthread() to start the grace period. */ - wake_up(&rsp->gp_wq); + /* + * We can't do wakeups while holding the rnp->lock, as that + * could cause possible deadlocks with the rq->lock. Deter + * the wakeup to interrupt context. + */ + irq_work_queue(&rsp->wakeup_work); } /* @@ -3235,6 +3247,7 @@ static void __init rcu_init_one(struct rcu_state *rsp, rsp->rda = rda; init_waitqueue_head(&rsp->gp_wq); + init_irq_work(&rsp->wakeup_work, rsp_wakeup); rnp = rsp->level[rcu_num_lvls - 1]; for_each_possible_cpu(i) { while (i > rnp->grphi) diff --git a/kernel/rcutree.h b/kernel/rcutree.h index da77a8f57ff9..4df503470e42 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -27,6 +27,7 @@ #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/seqlock.h> +#include <linux/irq_work.h> /* * Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and @@ -442,6 +443,7 @@ struct rcu_state { char *name; /* Name of structure. */ char abbr; /* Abbreviated name. */ struct list_head flavors; /* List of RCU flavors. */ + struct irq_work wakeup_work; /* Postponed wakeups */ }; /* Values for rcu_state structure's gp_flags field. */ diff --git a/kernel/softirq.c b/kernel/softirq.c index b5197dcb0dad..3d6833f125d3 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -195,8 +195,12 @@ void local_bh_enable_ip(unsigned long ip) EXPORT_SYMBOL(local_bh_enable_ip); /* - * We restart softirq processing for at most 2 ms, - * and if need_resched() is not set. + * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times, + * but break the loop if need_resched() is set or after 2 ms. + * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in + * certain cases, such as stop_machine(), jiffies may cease to + * increment and so we need the MAX_SOFTIRQ_RESTART limit as + * well to make sure we eventually return from this method. * * These limits have been established via experimentation. * The two things to balance is latency against fairness - @@ -204,6 +208,7 @@ EXPORT_SYMBOL(local_bh_enable_ip); * should not be able to lock up the box. */ #define MAX_SOFTIRQ_TIME msecs_to_jiffies(2) +#define MAX_SOFTIRQ_RESTART 10 asmlinkage void __do_softirq(void) { @@ -212,6 +217,7 @@ asmlinkage void __do_softirq(void) unsigned long end = jiffies + MAX_SOFTIRQ_TIME; int cpu; unsigned long old_flags = current->flags; + int max_restart = MAX_SOFTIRQ_RESTART; /* * Mask out PF_MEMALLOC s current task context is borrowed for the @@ -265,7 +271,8 @@ restart: pending = local_softirq_pending(); if (pending) { - if (time_before(jiffies, end) && !need_resched()) + if (time_before(jiffies, end) && !need_resched() && + --max_restart) goto restart; wakeup_softirqd(); diff --git a/kernel/sys.c b/kernel/sys.c index b95d3c72ba21..2bbd9a73b54c 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -362,6 +362,29 @@ int unregister_reboot_notifier(struct notifier_block *nb) } EXPORT_SYMBOL(unregister_reboot_notifier); +/* Add backwards compatibility for stable trees. */ +#ifndef PF_NO_SETAFFINITY +#define PF_NO_SETAFFINITY PF_THREAD_BOUND +#endif + +static void migrate_to_reboot_cpu(void) +{ + /* The boot cpu is always logical cpu 0 */ + int cpu = 0; + + cpu_hotplug_disable(); + + /* Make certain the cpu I'm about to reboot on is online */ + if (!cpu_online(cpu)) + cpu = cpumask_first(cpu_online_mask); + + /* Prevent races with other tasks migrating this task */ + current->flags |= PF_NO_SETAFFINITY; + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed_ptr(current, cpumask_of(cpu)); +} + /** * kernel_restart - reboot the system * @cmd: pointer to buffer containing command to execute for restart @@ -373,7 +396,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier); void kernel_restart(char *cmd) { kernel_restart_prepare(cmd); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); if (!cmd) printk(KERN_EMERG "Restarting system.\n"); @@ -400,7 +423,7 @@ static void kernel_shutdown_prepare(enum system_states state) void kernel_halt(void) { kernel_shutdown_prepare(SYSTEM_HALT); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); printk(KERN_EMERG "System halted.\n"); kmsg_dump(KMSG_DUMP_HALT); @@ -419,7 +442,7 @@ void kernel_power_off(void) kernel_shutdown_prepare(SYSTEM_POWER_OFF); if (pm_power_off_prepare) pm_power_off_prepare(); - disable_nonboot_cpus(); + migrate_to_reboot_cpu(); syscore_shutdown(); printk(KERN_EMERG "Power down.\n"); kmsg_dump(KMSG_DUMP_POWEROFF); diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1a41023a1f88..e71a8be4a6ee 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -652,8 +652,6 @@ static struct { ARCH_TRACE_CLOCKS }; -int trace_clock_id; - /* * trace_parser_get_init - gets the buffer for trace parser */ @@ -2826,7 +2824,7 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot) iter->iter_flags |= TRACE_FILE_ANNOTATE; /* Output in nanoseconds only if we are using a clock in nanoseconds. */ - if (trace_clocks[trace_clock_id].in_ns) + if (trace_clocks[tr->clock_id].in_ns) iter->iter_flags |= TRACE_FILE_TIME_IN_NS; /* stop the trace while dumping if we are not opening "snapshot" */ @@ -3825,7 +3823,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp) iter->iter_flags |= TRACE_FILE_LAT_FMT; /* Output in nanoseconds only if we are using a clock in nanoseconds. */ - if (trace_clocks[trace_clock_id].in_ns) + if (trace_clocks[tr->clock_id].in_ns) iter->iter_flags |= TRACE_FILE_TIME_IN_NS; iter->cpu_file = tc->cpu; @@ -5095,7 +5093,7 @@ tracing_stats_read(struct file *filp, char __user *ubuf, cnt = ring_buffer_bytes_cpu(trace_buf->buffer, cpu); trace_seq_printf(s, "bytes: %ld\n", cnt); - if (trace_clocks[trace_clock_id].in_ns) { + if (trace_clocks[tr->clock_id].in_ns) { /* local or global for trace_clock */ t = ns2usecs(ring_buffer_oldest_event_ts(trace_buf->buffer, cpu)); usec_rem = do_div(t, USEC_PER_SEC); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 711ca7d3e7f1..20572ed88c5c 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -700,8 +700,6 @@ enum print_line_t print_trace_line(struct trace_iterator *iter); extern unsigned long trace_flags; -extern int trace_clock_id; - /* Standard output formatting function used for function return traces */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c index 5f9c44cdf1f5..4cc6442733f4 100644 --- a/lib/mpi/mpicoder.c +++ b/lib/mpi/mpicoder.c @@ -37,7 +37,7 @@ MPI mpi_read_raw_data(const void *xbuffer, size_t nbytes) mpi_limb_t a; MPI val = NULL; - while (nbytes >= 0 && buffer[0] == 0) { + while (nbytes > 0 && buffer[0] == 0) { buffer++; nbytes--; } diff --git a/mm/frontswap.c b/mm/frontswap.c index 538367ef1372..1b24bdcb3197 100644 --- a/mm/frontswap.c +++ b/mm/frontswap.c @@ -319,7 +319,7 @@ void __frontswap_invalidate_area(unsigned type) return; frontswap_ops->invalidate_area(type); atomic_set(&sis->frontswap_pages, 0); - memset(sis->frontswap_map, 0, sis->max / sizeof(long)); + bitmap_zero(sis->frontswap_map, sis->max); } clear_bit(type, need_init); } diff --git a/mm/hugetlb.c b/mm/hugetlb.c index f8feeeca6686..e2bfbf73a551 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2839,7 +2839,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, if (ptep) { entry = huge_ptep_get(ptep); if (unlikely(is_hugetlb_entry_migration(entry))) { - migration_entry_wait(mm, (pmd_t *)ptep, address); + migration_entry_wait_huge(mm, ptep); return 0; } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) return VM_FAULT_HWPOISON_LARGE | diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 010d6c14129a..194721839cf5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1199,7 +1199,6 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, mz = mem_cgroup_zoneinfo(root, nid, zid); iter = &mz->reclaim_iter[reclaim->priority]; - last_visited = iter->last_visited; if (prev && reclaim->generation != iter->generation) { iter->last_visited = NULL; goto out_unlock; @@ -1218,13 +1217,12 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, * is alive. */ dead_count = atomic_read(&root->dead_count); - smp_rmb(); - last_visited = iter->last_visited; - if (last_visited) { - if ((dead_count != iter->last_dead_count) || - !css_tryget(&last_visited->css)) { + if (dead_count == iter->last_dead_count) { + smp_rmb(); + last_visited = iter->last_visited; + if (last_visited && + !css_tryget(&last_visited->css)) last_visited = NULL; - } } } @@ -3141,8 +3139,6 @@ int memcg_update_cache_size(struct kmem_cache *s, int num_groups) return -ENOMEM; } - INIT_WORK(&s->memcg_params->destroy, - kmem_cache_destroy_work_func); s->memcg_params->is_root_cache = true; /* diff --git a/mm/migrate.c b/mm/migrate.c index b1f57501de9c..6f0c24438bba 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -200,15 +200,14 @@ static void remove_migration_ptes(struct page *old, struct page *new) * get to the page and wait until migration is finished. * When we return from this function the fault will be retried. */ -void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, - unsigned long address) +static void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep, + spinlock_t *ptl) { - pte_t *ptep, pte; - spinlock_t *ptl; + pte_t pte; swp_entry_t entry; struct page *page; - ptep = pte_offset_map_lock(mm, pmd, address, &ptl); + spin_lock(ptl); pte = *ptep; if (!is_swap_pte(pte)) goto out; @@ -236,6 +235,20 @@ out: pte_unmap_unlock(ptep, ptl); } +void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, + unsigned long address) +{ + spinlock_t *ptl = pte_lockptr(mm, pmd); + pte_t *ptep = pte_offset_map(pmd, address); + __migration_entry_wait(mm, ptep, ptl); +} + +void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte) +{ + spinlock_t *ptl = &(mm)->page_table_lock; + __migration_entry_wait(mm, pte, ptl); +} + #ifdef CONFIG_BLOCK /* Returns true if all buffers are successfully locked */ static bool buffer_migrate_lock_buffers(struct buffer_head *head, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 378a15bcd649..c3edb624fccf 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1628,6 +1628,7 @@ static bool __zone_watermark_ok(struct zone *z, int order, unsigned long mark, long min = mark; long lowmem_reserve = z->lowmem_reserve[classzone_idx]; int o; + long free_cma = 0; free_pages -= (1 << order) - 1; if (alloc_flags & ALLOC_HIGH) @@ -1637,9 +1638,10 @@ static bool __zone_watermark_ok(struct zone *z, int order, unsigned long mark, #ifdef CONFIG_CMA /* If allocation can't use CMA areas don't use free CMA pages */ if (!(alloc_flags & ALLOC_CMA)) - free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES); + free_cma = zone_page_state(z, NR_FREE_CMA_PAGES); #endif - if (free_pages <= min + lowmem_reserve) + + if (free_pages - free_cma <= min + lowmem_reserve) return false; for (o = 0; o < order; o++) { /* At the next order, this order's pages become unavailable */ diff --git a/mm/swap_state.c b/mm/swap_state.c index b3d40dcf3624..f24ab0dff554 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -336,8 +336,24 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, * Swap entry may have been freed since our caller observed it. */ err = swapcache_prepare(entry); - if (err == -EEXIST) { /* seems racy */ + if (err == -EEXIST) { radix_tree_preload_end(); + /* + * We might race against get_swap_page() and stumble + * across a SWAP_HAS_CACHE swap_map entry whose page + * has not been brought into the swapcache yet, while + * the other end is scheduled away waiting on discard + * I/O completion at scan_swap_map(). + * + * In order to avoid turning this transitory state + * into a permanent loop around this -EEXIST case + * if !CONFIG_PREEMPT and the I/O completion happens + * to be waiting on the CPU waitqueue where we are now + * busy looping, we just conditionally invoke the + * scheduler here, if there are some more important + * tasks to run. + */ + cond_resched(); continue; } if (err) { /* swp entry is obsolete ? */ diff --git a/mm/swapfile.c b/mm/swapfile.c index 6c340d908b27..746af55b8455 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2116,7 +2116,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) } /* frontswap enabled? set up bit-per-page map for frontswap */ if (frontswap_enabled) - frontswap_map = vzalloc(maxpages / sizeof(long)); + frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long)); if (p->bdev) { if (blk_queue_nonrot(bdev_get_queue(p->bdev))) { diff --git a/net/9p/client.c b/net/9p/client.c index 8eb75425e6e6..addc116cecf0 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -562,36 +562,19 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, if (!p9_is_proto_dotl(c)) { /* Error is reported in string format */ - uint16_t len; - /* 7 = header size for RERROR, 2 is the size of string len; */ - int inline_len = in_hdrlen - (7 + 2); + int len; + /* 7 = header size for RERROR; */ + int inline_len = in_hdrlen - 7; - /* Read the size of error string */ - err = p9pdu_readf(req->rc, c->proto_version, "w", &len); - if (err) - goto out_err; - - ename = kmalloc(len + 1, GFP_NOFS); - if (!ename) { - err = -ENOMEM; + len = req->rc->size - req->rc->offset; + if (len > (P9_ZC_HDR_SZ - 7)) { + err = -EFAULT; goto out_err; } - if (len <= inline_len) { - /* We have error in protocol buffer itself */ - if (pdu_read(req->rc, ename, len)) { - err = -EFAULT; - goto out_free; - } - } else { - /* - * Part of the data is in user space buffer. - */ - if (pdu_read(req->rc, ename, inline_len)) { - err = -EFAULT; - goto out_free; - - } + ename = &req->rc->sdata[req->rc->offset]; + if (len > inline_len) { + /* We have error in external buffer */ if (kern_buf) { memcpy(ename + inline_len, uidata, len - inline_len); @@ -600,19 +583,19 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, uidata, len - inline_len); if (err) { err = -EFAULT; - goto out_free; + goto out_err; } } } - ename[len] = 0; - if (p9_is_proto_dotu(c)) { - /* For dotu we also have error code */ - err = p9pdu_readf(req->rc, - c->proto_version, "d", &ecode); - if (err) - goto out_free; + ename = NULL; + err = p9pdu_readf(req->rc, c->proto_version, "s?d", + &ename, &ecode); + if (err) + goto out_err; + + if (p9_is_proto_dotu(c)) err = -ecode; - } + if (!err || !IS_ERR_VALUE(err)) { err = p9_errstr2errno(ename, strlen(ename)); @@ -628,8 +611,6 @@ static int p9_check_zc_errors(struct p9_client *c, struct p9_req_t *req, } return err; -out_free: - kfree(ename); out_err: p9_debug(P9_DEBUG_ERROR, "couldn't parse error%d\n", err); return err; diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 071f288b77a8..f680ee101878 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -29,6 +29,21 @@ #include "bat_algo.h" #include "network-coding.h" +/** + * batadv_dup_status - duplicate status + * @BATADV_NO_DUP: the packet is a duplicate + * @BATADV_ORIG_DUP: OGM is a duplicate in the originator (but not for the + * neighbor) + * @BATADV_NEIGH_DUP: OGM is a duplicate for the neighbor + * @BATADV_PROTECTED: originator is currently protected (after reboot) + */ +enum batadv_dup_status { + BATADV_NO_DUP = 0, + BATADV_ORIG_DUP, + BATADV_NEIGH_DUP, + BATADV_PROTECTED, +}; + static struct batadv_neigh_node * batadv_iv_ogm_neigh_new(struct batadv_hard_iface *hard_iface, const uint8_t *neigh_addr, @@ -650,7 +665,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, const struct batadv_ogm_packet *batadv_ogm_packet, struct batadv_hard_iface *if_incoming, const unsigned char *tt_buff, - int is_duplicate) + enum batadv_dup_status dup_status) { struct batadv_neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL; struct batadv_neigh_node *router = NULL; @@ -676,7 +691,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, continue; } - if (is_duplicate) + if (dup_status != BATADV_NO_DUP) continue; spin_lock_bh(&tmp_neigh_node->lq_update_lock); @@ -718,7 +733,7 @@ batadv_iv_ogm_orig_update(struct batadv_priv *bat_priv, neigh_node->tq_avg = batadv_ring_buffer_avg(neigh_node->tq_recv); spin_unlock_bh(&neigh_node->lq_update_lock); - if (!is_duplicate) { + if (dup_status == BATADV_NO_DUP) { orig_node->last_ttl = batadv_ogm_packet->header.ttl; neigh_node->last_ttl = batadv_ogm_packet->header.ttl; } @@ -902,15 +917,16 @@ out: return ret; } -/* processes a batman packet for all interfaces, adjusts the sequence number and - * finds out whether it is a duplicate. - * returns: - * 1 the packet is a duplicate - * 0 the packet has not yet been received - * -1 the packet is old and has been received while the seqno window - * was protected. Caller should drop it. +/** + * batadv_iv_ogm_update_seqnos - process a batman packet for all interfaces, + * adjust the sequence number and find out whether it is a duplicate + * @ethhdr: ethernet header of the packet + * @batadv_ogm_packet: OGM packet to be considered + * @if_incoming: interface on which the OGM packet was received + * + * Returns duplicate status as enum batadv_dup_status */ -static int +static enum batadv_dup_status batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, const struct batadv_ogm_packet *batadv_ogm_packet, const struct batadv_hard_iface *if_incoming) @@ -918,17 +934,18 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, struct batadv_priv *bat_priv = netdev_priv(if_incoming->soft_iface); struct batadv_orig_node *orig_node; struct batadv_neigh_node *tmp_neigh_node; - int is_duplicate = 0; + int is_dup; int32_t seq_diff; int need_update = 0; - int set_mark, ret = -1; + int set_mark; + enum batadv_dup_status ret = BATADV_NO_DUP; uint32_t seqno = ntohl(batadv_ogm_packet->seqno); uint8_t *neigh_addr; uint8_t packet_count; orig_node = batadv_get_orig_node(bat_priv, batadv_ogm_packet->orig); if (!orig_node) - return 0; + return BATADV_NO_DUP; spin_lock_bh(&orig_node->ogm_cnt_lock); seq_diff = seqno - orig_node->last_real_seqno; @@ -936,22 +953,29 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, /* signalize caller that the packet is to be dropped. */ if (!hlist_empty(&orig_node->neigh_list) && batadv_window_protected(bat_priv, seq_diff, - &orig_node->batman_seqno_reset)) + &orig_node->batman_seqno_reset)) { + ret = BATADV_PROTECTED; goto out; + } rcu_read_lock(); hlist_for_each_entry_rcu(tmp_neigh_node, &orig_node->neigh_list, list) { - is_duplicate |= batadv_test_bit(tmp_neigh_node->real_bits, - orig_node->last_real_seqno, - seqno); - neigh_addr = tmp_neigh_node->addr; + is_dup = batadv_test_bit(tmp_neigh_node->real_bits, + orig_node->last_real_seqno, + seqno); + if (batadv_compare_eth(neigh_addr, ethhdr->h_source) && - tmp_neigh_node->if_incoming == if_incoming) + tmp_neigh_node->if_incoming == if_incoming) { set_mark = 1; - else + if (is_dup) + ret = BATADV_NEIGH_DUP; + } else { set_mark = 0; + if (is_dup && (ret != BATADV_NEIGH_DUP)) + ret = BATADV_ORIG_DUP; + } /* if the window moved, set the update flag. */ need_update |= batadv_bit_get_packet(bat_priv, @@ -971,8 +995,6 @@ batadv_iv_ogm_update_seqnos(const struct ethhdr *ethhdr, orig_node->last_real_seqno = seqno; } - ret = is_duplicate; - out: spin_unlock_bh(&orig_node->ogm_cnt_lock); batadv_orig_node_free_ref(orig_node); @@ -994,7 +1016,8 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, int is_broadcast = 0, is_bidirect; bool is_single_hop_neigh = false; bool is_from_best_next_hop = false; - int is_duplicate, sameseq, simlar_ttl; + int sameseq, similar_ttl; + enum batadv_dup_status dup_status; uint32_t if_incoming_seqno; uint8_t *prev_sender; @@ -1138,10 +1161,10 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, if (!orig_node) return; - is_duplicate = batadv_iv_ogm_update_seqnos(ethhdr, batadv_ogm_packet, - if_incoming); + dup_status = batadv_iv_ogm_update_seqnos(ethhdr, batadv_ogm_packet, + if_incoming); - if (is_duplicate == -1) { + if (dup_status == BATADV_PROTECTED) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: packet within seqno protection time (sender: %pM)\n", ethhdr->h_source); @@ -1211,11 +1234,12 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, * seqno and similar ttl as the non-duplicate */ sameseq = orig_node->last_real_seqno == ntohl(batadv_ogm_packet->seqno); - simlar_ttl = orig_node->last_ttl - 3 <= batadv_ogm_packet->header.ttl; - if (is_bidirect && (!is_duplicate || (sameseq && simlar_ttl))) + similar_ttl = orig_node->last_ttl - 3 <= batadv_ogm_packet->header.ttl; + if (is_bidirect && ((dup_status == BATADV_NO_DUP) || + (sameseq && similar_ttl))) batadv_iv_ogm_orig_update(bat_priv, orig_node, ethhdr, batadv_ogm_packet, if_incoming, - tt_buff, is_duplicate); + tt_buff, dup_status); /* is single hop (direct) neighbor */ if (is_single_hop_neigh) { @@ -1236,7 +1260,7 @@ static void batadv_iv_ogm_process(const struct ethhdr *ethhdr, goto out_neigh; } - if (is_duplicate) { + if (dup_status == BATADV_NEIGH_DUP) { batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Drop packet: duplicate packet received\n"); goto out_neigh; diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 379061c72549..de27b3175cfd 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1067,6 +1067,10 @@ void batadv_bla_update_orig_address(struct batadv_priv *bat_priv, group = htons(crc16(0, primary_if->net_dev->dev_addr, ETH_ALEN)); bat_priv->bla.claim_dest.group = group; + /* purge everything when bridge loop avoidance is turned off */ + if (!atomic_read(&bat_priv->bridge_loop_avoidance)) + oldif = NULL; + if (!oldif) { batadv_bla_purge_claims(bat_priv, NULL, 1); batadv_bla_purge_backbone_gw(bat_priv, 1); diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 15a22efa9a67..929e304dacb2 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -582,10 +582,7 @@ static ssize_t batadv_store_mesh_iface(struct kobject *kobj, (strncmp(hard_iface->soft_iface->name, buff, IFNAMSIZ) == 0)) goto out; - if (!rtnl_trylock()) { - ret = -ERESTARTSYS; - goto out; - } + rtnl_lock(); if (status_tmp == BATADV_IF_NOT_IN_USE) { batadv_hardif_disable_interface(hard_iface, diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 33843c5c4939..d817c932d634 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1555,11 +1555,15 @@ static const struct rfkill_ops hci_rfkill_ops = { static void hci_power_on(struct work_struct *work) { struct hci_dev *hdev = container_of(work, struct hci_dev, power_on); + int err; BT_DBG("%s", hdev->name); - if (hci_dev_open(hdev->id) < 0) + err = hci_dev_open(hdev->id); + if (err < 0) { + mgmt_set_powered_failed(hdev, err); return; + } if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) queue_delayed_work(hdev->req_workqueue, &hdev->power_off, diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index a76d1ac0321b..24bee07ee4ce 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3677,10 +3677,14 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len) } static inline int l2cap_command_rej(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_cmd_rej_unk *rej = (struct l2cap_cmd_rej_unk *) data; + if (cmd_len < sizeof(*rej)) + return -EPROTO; + if (rej->reason != L2CAP_REJ_NOT_UNDERSTOOD) return 0; @@ -3829,11 +3833,14 @@ sendresp: } static int l2cap_connect_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data) { struct hci_dev *hdev = conn->hcon->hdev; struct hci_conn *hcon = conn->hcon; + if (cmd_len < sizeof(struct l2cap_conn_req)) + return -EPROTO; + hci_dev_lock(hdev); if (test_bit(HCI_MGMT, &hdev->dev_flags) && !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) @@ -3847,7 +3854,8 @@ static int l2cap_connect_req(struct l2cap_conn *conn, } static int l2cap_connect_create_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data; u16 scid, dcid, result, status; @@ -3855,6 +3863,9 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, u8 req[128]; int err; + if (cmd_len < sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); dcid = __le16_to_cpu(rsp->dcid); result = __le16_to_cpu(rsp->result); @@ -3952,6 +3963,9 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_chan *chan; int len, err = 0; + if (cmd_len < sizeof(*req)) + return -EPROTO; + dcid = __le16_to_cpu(req->dcid); flags = __le16_to_cpu(req->flags); @@ -3975,7 +3989,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, /* Reject if config buffer is too small. */ len = cmd_len - sizeof(*req); - if (len < 0 || chan->conf_len + len > sizeof(chan->conf_req)) { + if (chan->conf_len + len > sizeof(chan->conf_req)) { l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, l2cap_build_conf_rsp(chan, rsp, L2CAP_CONF_REJECT, flags), rsp); @@ -4053,14 +4067,18 @@ unlock: } static inline int l2cap_config_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_conf_rsp *rsp = (struct l2cap_conf_rsp *)data; u16 scid, flags, result; struct l2cap_chan *chan; - int len = le16_to_cpu(cmd->len) - sizeof(*rsp); + int len = cmd_len - sizeof(*rsp); int err = 0; + if (cmd_len < sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); flags = __le16_to_cpu(rsp->flags); result = __le16_to_cpu(rsp->result); @@ -4161,7 +4179,8 @@ done: } static inline int l2cap_disconnect_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_disconn_req *req = (struct l2cap_disconn_req *) data; struct l2cap_disconn_rsp rsp; @@ -4169,6 +4188,9 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_chan *chan; struct sock *sk; + if (cmd_len != sizeof(*req)) + return -EPROTO; + scid = __le16_to_cpu(req->scid); dcid = __le16_to_cpu(req->dcid); @@ -4208,12 +4230,16 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, } static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_disconn_rsp *rsp = (struct l2cap_disconn_rsp *) data; u16 dcid, scid; struct l2cap_chan *chan; + if (cmd_len != sizeof(*rsp)) + return -EPROTO; + scid = __le16_to_cpu(rsp->scid); dcid = __le16_to_cpu(rsp->dcid); @@ -4243,11 +4269,15 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, } static inline int l2cap_information_req(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_info_req *req = (struct l2cap_info_req *) data; u16 type; + if (cmd_len != sizeof(*req)) + return -EPROTO; + type = __le16_to_cpu(req->type); BT_DBG("type 0x%4.4x", type); @@ -4294,11 +4324,15 @@ static inline int l2cap_information_req(struct l2cap_conn *conn, } static inline int l2cap_information_rsp(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, u8 *data) + struct l2cap_cmd_hdr *cmd, u16 cmd_len, + u8 *data) { struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data; u16 type, result; + if (cmd_len != sizeof(*rsp)) + return -EPROTO; + type = __le16_to_cpu(rsp->type); result = __le16_to_cpu(rsp->result); @@ -5164,16 +5198,16 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, switch (cmd->code) { case L2CAP_COMMAND_REJ: - l2cap_command_rej(conn, cmd, data); + l2cap_command_rej(conn, cmd, cmd_len, data); break; case L2CAP_CONN_REQ: - err = l2cap_connect_req(conn, cmd, data); + err = l2cap_connect_req(conn, cmd, cmd_len, data); break; case L2CAP_CONN_RSP: case L2CAP_CREATE_CHAN_RSP: - err = l2cap_connect_create_rsp(conn, cmd, data); + err = l2cap_connect_create_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CONF_REQ: @@ -5181,15 +5215,15 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_CONF_RSP: - err = l2cap_config_rsp(conn, cmd, data); + err = l2cap_config_rsp(conn, cmd, cmd_len, data); break; case L2CAP_DISCONN_REQ: - err = l2cap_disconnect_req(conn, cmd, data); + err = l2cap_disconnect_req(conn, cmd, cmd_len, data); break; case L2CAP_DISCONN_RSP: - err = l2cap_disconnect_rsp(conn, cmd, data); + err = l2cap_disconnect_rsp(conn, cmd, cmd_len, data); break; case L2CAP_ECHO_REQ: @@ -5200,11 +5234,11 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_INFO_REQ: - err = l2cap_information_req(conn, cmd, data); + err = l2cap_information_req(conn, cmd, cmd_len, data); break; case L2CAP_INFO_RSP: - err = l2cap_information_rsp(conn, cmd, data); + err = l2cap_information_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CREATE_CHAN_REQ: diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 35fef22703e9..f8ecbc70293d 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2700,7 +2700,7 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, break; case DISCOV_TYPE_LE: - if (!lmp_host_le_capable(hdev)) { + if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, MGMT_STATUS_NOT_SUPPORTED); mgmt_pending_remove(cmd); @@ -3418,6 +3418,27 @@ new_settings: return err; } +int mgmt_set_powered_failed(struct hci_dev *hdev, int err) +{ + struct pending_cmd *cmd; + u8 status; + + cmd = mgmt_pending_find(MGMT_OP_SET_POWERED, hdev); + if (!cmd) + return -ENOENT; + + if (err == -ERFKILL) + status = MGMT_STATUS_RFKILLED; + else + status = MGMT_STATUS_FAILED; + + err = cmd_status(cmd->sk, hdev->id, MGMT_OP_SET_POWERED, status); + + mgmt_pending_remove(cmd); + + return err; +} + int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable) { struct cmd_lookup match = { NULL, hdev }; diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index b2296d3857a0..b5562abdd6e0 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -770,7 +770,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) BT_DBG("conn %p hcon %p level 0x%2.2x", conn, hcon, sec_level); - if (!lmp_host_le_capable(hcon->hdev)) + if (!test_bit(HCI_LE_ENABLED, &hcon->hdev->dev_flags)) return 1; if (sec_level == BT_SECURITY_LOW) @@ -851,7 +851,7 @@ int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) __u8 reason; int err = 0; - if (!lmp_host_le_capable(conn->hcon->hdev)) { + if (!test_bit(HCI_LE_ENABLED, &conn->hcon->hdev->dev_flags)) { err = -ENOTSUPP; reason = SMP_PAIRING_NOTSUPP; goto done; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d5953b87918c..3a246a6cab47 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1675,13 +1675,13 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend) __register_request(osdc, req); __unregister_linger_request(osdc, req); } + reset_changed_osds(osdc); mutex_unlock(&osdc->request_mutex); if (needmap) { dout("%d requests for down osds, need new map\n", needmap); ceph_monc_request_next_osdmap(&osdc->client->monc); } - reset_changed_osds(osdc); } diff --git a/net/core/filter.c b/net/core/filter.c index dad2a178f9f8..6438f29ff266 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -778,7 +778,7 @@ int sk_detach_filter(struct sock *sk) } EXPORT_SYMBOL_GPL(sk_detach_filter); -static void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) +void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) { static const u16 decodes[] = { [BPF_S_ALU_ADD_K] = BPF_ALU|BPF_ADD|BPF_K, diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c index d5bef0b0f639..a0e9cf6379de 100644 --- a/net/core/sock_diag.c +++ b/net/core/sock_diag.c @@ -73,8 +73,13 @@ int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk, goto out; } - if (filter) - memcpy(nla_data(attr), filter->insns, len); + if (filter) { + struct sock_filter *fb = (struct sock_filter *)nla_data(attr); + int i; + + for (i = 0; i < filter->len; i++, fb++) + sk_decode_filter(&filter->insns[i], fb); + } out: rcu_read_unlock(); diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index be2f8da0ae8e..7fa8f08fa7ae 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -853,7 +853,7 @@ void ip_tunnel_dellink(struct net_device *dev, struct list_head *head) } EXPORT_SYMBOL_GPL(ip_tunnel_dellink); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, struct rtnl_link_ops *ops, char *devname) { struct ip_tunnel_net *itn = net_generic(net, ip_tnl_net_id); @@ -899,7 +899,7 @@ static void ip_tunnel_destroy(struct ip_tunnel_net *itn, struct list_head *head) unregister_netdevice_queue(itn->fb_tunnel_dev, head); } -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn) +void ip_tunnel_delete_net(struct ip_tunnel_net *itn) { LIST_HEAD(list); diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 9d2bdb2c1d3f..c118f6b576bb 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -361,8 +361,7 @@ static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) tunnel->err_count = 0; } - IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED | - IPSKB_REROUTED); + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); nf_reset(skb); diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 637a341c1e2d..8dec6876dc50 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -346,19 +346,19 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh skb_put(skb, 2); /* Copy user data into skb */ - error = memcpy_fromiovec(skb->data, m->msg_iov, total_len); + error = memcpy_fromiovec(skb_put(skb, total_len), m->msg_iov, + total_len); if (error < 0) { kfree_skb(skb); goto error_put_sess_tun; } - skb_put(skb, total_len); l2tp_xmit_skb(session, skb, session->hdr_len); sock_put(ps->tunnel_sock); sock_put(sk); - return error; + return total_len; error_put_sess_tun: sock_put(ps->tunnel_sock); diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 5b142fb16480..9e6c2a075a4c 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2542,6 +2542,7 @@ __ip_vs_get_dest_entries(struct net *net, const struct ip_vs_get_dests *get, struct ip_vs_dest *dest; struct ip_vs_dest_entry entry; + memset(&entry, 0, sizeof(entry)); list_for_each_entry(dest, &svc->destinations, n_list) { if (count >= get->num_dests) break; diff --git a/net/netfilter/nfnetlink_acct.c b/net/netfilter/nfnetlink_acct.c index dc3fd5d44464..c7b6d466a662 100644 --- a/net/netfilter/nfnetlink_acct.c +++ b/net/netfilter/nfnetlink_acct.c @@ -149,9 +149,12 @@ nfnl_acct_dump(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); list_for_each_entry_rcu(cur, &nfnl_acct_list, head) { - if (last && cur != last) - continue; + if (last) { + if (cur != last) + continue; + last = NULL; + } if (nfnl_acct_fill_info(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NFNL_MSG_TYPE(cb->nlh->nlmsg_type), diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c index 701c88a20fea..65074dfb9383 100644 --- a/net/netfilter/nfnetlink_cttimeout.c +++ b/net/netfilter/nfnetlink_cttimeout.c @@ -220,9 +220,12 @@ ctnl_timeout_dump(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); list_for_each_entry_rcu(cur, &cttimeout_list, head) { - if (last && cur != last) - continue; + if (last) { + if (cur != last) + continue; + last = NULL; + } if (ctnl_timeout_fill_info(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NFNL_MSG_TYPE(cb->nlh->nlmsg_type), diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 4e27fa035814..5352b2d2d5bf 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -637,9 +637,6 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum) if (queue->copy_mode == NFQNL_COPY_NONE) return -EINVAL; - if ((queue->flags & NFQA_CFG_F_GSO) || !skb_is_gso(entry->skb)) - return __nfqnl_enqueue_packet(net, queue, entry); - skb = entry->skb; switch (entry->pf) { @@ -651,6 +648,9 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum) break; } + if ((queue->flags & NFQA_CFG_F_GSO) || !skb_is_gso(skb)) + return __nfqnl_enqueue_packet(net, queue, entry); + nf_bridge_adjust_skb_data(skb); segs = skb_gso_segment(skb, 0); /* Does not use PTR_ERR to limit the number of error codes that can be diff --git a/net/netfilter/xt_TCPMSS.c b/net/netfilter/xt_TCPMSS.c index a75240f0d42b..afaebc766933 100644 --- a/net/netfilter/xt_TCPMSS.c +++ b/net/netfilter/xt_TCPMSS.c @@ -125,6 +125,12 @@ tcpmss_mangle_packet(struct sk_buff *skb, skb_put(skb, TCPOLEN_MSS); + /* RFC 879 states that the default MSS is 536 without specific + * knowledge that the destination host is prepared to accept larger. + * Since no MSS was provided, we MUST NOT set a value > 536. + */ + newmss = min(newmss, (u16)536); + opt = (u_int8_t *)tcph + sizeof(struct tcphdr); memmove(opt + TCPOLEN_MSS, opt, tcplen - sizeof(struct tcphdr)); diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index d0b3dd60d386..57ee84d21470 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -371,7 +371,7 @@ static int netlink_mmap(struct file *file, struct socket *sock, err = 0; out: mutex_unlock(&nlk->pg_vec_lock); - return 0; + return err; } static void netlink_frame_flush_dcache(const struct nl_mmap_hdr *hdr) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 8ec1bca7f859..20a1bd0e6549 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2851,12 +2851,11 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr, return -EOPNOTSUPP; uaddr->sa_family = AF_PACKET; + memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data)); rcu_read_lock(); dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex); if (dev) - strncpy(uaddr->sa_data, dev->name, 14); - else - memset(uaddr->sa_data, 0, 14); + strlcpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data)); rcu_read_unlock(); *uaddr_len = sizeof(*uaddr); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 2b935e7cfe7b..281c1bded1f6 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -291,17 +291,18 @@ struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r, struct nlattr *ta { struct qdisc_rate_table *rtab; + if (tab == NULL || r->rate == 0 || r->cell_log == 0 || + nla_len(tab) != TC_RTAB_SIZE) + return NULL; + for (rtab = qdisc_rtab_list; rtab; rtab = rtab->next) { - if (memcmp(&rtab->rate, r, sizeof(struct tc_ratespec)) == 0) { + if (!memcmp(&rtab->rate, r, sizeof(struct tc_ratespec)) && + !memcmp(&rtab->data, nla_data(tab), 1024)) { rtab->refcnt++; return rtab; } } - if (tab == NULL || r->rate == 0 || r->cell_log == 0 || - nla_len(tab) != TC_RTAB_SIZE) - return NULL; - rtab = kmalloc(sizeof(*rtab), GFP_KERNEL); if (rtab) { rtab->rate = *r; diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 32a4625fef77..be35e2dbcc9a 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -206,6 +206,8 @@ static inline int sctp_cacc_skip(struct sctp_transport *primary, */ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) { + memset(q, 0, sizeof(struct sctp_outq)); + q->asoc = asoc; INIT_LIST_HEAD(&q->out_chunk_list); INIT_LIST_HEAD(&q->control_chunk_list); @@ -213,11 +215,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) INIT_LIST_HEAD(&q->sacked); INIT_LIST_HEAD(&q->abandoned); - q->fast_rtx = 0; - q->outstanding_bytes = 0; q->empty = 1; - q->cork = 0; - q->out_qlen = 0; } /* Free the outqueue structure and any related pending chunks. diff --git a/net/sctp/socket.c b/net/sctp/socket.c index f631c5ff4dbf..6abb1caf9836 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4003,6 +4003,12 @@ SCTP_STATIC void sctp_destroy_sock(struct sock *sk) /* Release our hold on the endpoint. */ sp = sctp_sk(sk); + /* This could happen during socket init, thus we bail out + * early, since the rest of the below is not setup either. + */ + if (sp->ep == NULL) + return; + if (sp->do_auto_asconf) { sp->do_auto_asconf = 0; list_del(&sp->auto_asconf_list); diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 8337663aa298..f97869f1f09b 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -149,7 +149,7 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ ld_flags = $(LDFLAGS) $(ldflags-y) -dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \ +dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ -I$(srctree)/arch/$(SRCARCH)/boot/dts \ -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \ -undef -D__DTS__ @@ -265,13 +265,13 @@ quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ -i $(dir $<) $(DTC_FLAGS) \ - -d $(depfile).dtc $(dtc-tmp) ; \ - cat $(depfile).pre $(depfile).dtc > $(depfile) + -d $(depfile).dtc.tmp $(dtc-tmp) ; \ + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) $(obj)/%.dtb: $(src)/%.dts FORCE $(call if_changed_dep,dtc) -dtc-tmp = $(subst $(comma),_,$(dot-target).dts) +dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) # Bzip2 # --------------------------------------------------------------------------- diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 254d5af88956..3b41bfca636c 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -71,7 +71,7 @@ static int pop_input_file(void); push_input_file(name); } -<*>^"#"(line)?{WS}+[0-9]+{WS}+{STRING}({WS}+[0-9]+)? { +<*>^"#"(line)?[ \t]+[0-9]+[ \t]+{STRING}([ \t]+[0-9]+)? { char *line, *tmp, *fn; /* skip text before line # */ line = yytext; diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index a6c5fcdfc032..2d30f41778b7 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -405,19 +405,19 @@ static yyconst flex_int16_t yy_accept[161] = static yyconst flex_int32_t yy_ec[256] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 4, 5, 6, 1, 1, 7, 8, 1, - 1, 9, 10, 10, 11, 10, 12, 13, 14, 15, - 15, 15, 15, 15, 15, 15, 15, 16, 1, 17, - 18, 19, 10, 10, 20, 20, 20, 20, 20, 20, - 21, 21, 21, 21, 21, 22, 21, 21, 21, 21, - 21, 21, 21, 21, 23, 21, 21, 24, 21, 21, - 1, 25, 26, 1, 21, 1, 20, 27, 28, 29, - - 30, 20, 21, 21, 31, 21, 21, 32, 33, 34, - 35, 36, 21, 37, 38, 39, 40, 41, 21, 24, - 42, 21, 43, 44, 45, 1, 1, 1, 1, 1, + 1, 2, 5, 6, 7, 1, 1, 8, 9, 1, + 1, 10, 11, 11, 12, 11, 13, 14, 15, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 1, 18, + 19, 20, 11, 11, 21, 21, 21, 21, 21, 21, + 22, 22, 22, 22, 22, 23, 22, 22, 22, 22, + 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, + 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, + + 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, + 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, + 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, @@ -434,36 +434,36 @@ static yyconst flex_int32_t yy_ec[256] = 1, 1, 1, 1, 1 } ; -static yyconst flex_int32_t yy_meta[46] = +static yyconst flex_int32_t yy_meta[47] = { 0, - 1, 1, 1, 1, 1, 2, 3, 1, 2, 2, - 2, 4, 5, 5, 5, 6, 1, 1, 1, 7, - 8, 8, 8, 8, 1, 1, 7, 7, 7, 7, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 3, 1, 1 + 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, + 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, + 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, + 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 3, 1, 1 } ; static yyconst flex_int16_t yy_base[175] = { 0, - 0, 388, 381, 40, 41, 386, 71, 385, 34, 44, - 390, 395, 60, 62, 371, 112, 111, 111, 111, 104, - 370, 106, 371, 342, 124, 119, 0, 144, 395, 0, - 123, 0, 159, 153, 165, 167, 395, 130, 395, 382, - 395, 0, 372, 122, 395, 157, 374, 379, 350, 21, - 346, 349, 395, 395, 395, 395, 395, 362, 395, 395, - 181, 346, 342, 395, 359, 0, 191, 343, 190, 351, - 350, 0, 0, 0, 173, 362, 177, 367, 357, 329, - 335, 328, 337, 331, 206, 329, 334, 327, 395, 338, - 170, 314, 346, 345, 318, 325, 343, 158, 316, 212, - - 322, 319, 320, 395, 340, 336, 308, 305, 314, 304, - 295, 138, 208, 220, 395, 292, 305, 265, 264, 254, - 201, 222, 285, 275, 273, 270, 236, 235, 225, 115, - 395, 395, 252, 216, 216, 217, 214, 230, 209, 220, - 213, 239, 211, 217, 216, 209, 229, 395, 240, 225, - 206, 169, 395, 395, 116, 106, 99, 54, 395, 395, - 254, 260, 268, 272, 276, 282, 289, 293, 301, 309, - 313, 319, 327, 335 + 0, 385, 378, 40, 41, 383, 72, 382, 34, 44, + 388, 393, 61, 117, 368, 116, 115, 115, 115, 48, + 367, 107, 368, 339, 127, 120, 0, 147, 393, 0, + 127, 0, 133, 156, 168, 153, 393, 125, 393, 380, + 393, 0, 369, 127, 393, 160, 371, 377, 347, 21, + 343, 346, 393, 393, 393, 393, 393, 359, 393, 393, + 183, 343, 339, 393, 356, 0, 183, 340, 187, 348, + 347, 0, 0, 0, 178, 359, 195, 365, 354, 326, + 332, 325, 334, 328, 204, 326, 331, 324, 393, 335, + 150, 311, 343, 342, 315, 322, 340, 179, 313, 207, + + 319, 316, 317, 393, 337, 333, 305, 302, 311, 301, + 310, 190, 338, 337, 393, 307, 322, 301, 305, 277, + 208, 311, 307, 278, 271, 270, 248, 246, 213, 130, + 393, 393, 263, 235, 207, 221, 218, 229, 213, 213, + 206, 234, 218, 210, 208, 193, 219, 393, 223, 204, + 176, 157, 393, 393, 120, 106, 97, 119, 393, 393, + 245, 251, 259, 263, 267, 273, 280, 284, 292, 300, + 304, 310, 318, 326 } ; static yyconst flex_int16_t yy_def[175] = @@ -489,108 +489,108 @@ static yyconst flex_int16_t yy_def[175] = 160, 160, 160, 160 } ; -static yyconst flex_int16_t yy_nxt[441] = +static yyconst flex_int16_t yy_nxt[440] = { 0, - 12, 13, 14, 15, 16, 12, 17, 18, 12, 12, - 12, 19, 12, 12, 12, 12, 20, 21, 22, 23, - 23, 23, 23, 23, 12, 12, 23, 23, 23, 23, + 12, 13, 14, 13, 15, 16, 12, 17, 18, 12, + 12, 12, 19, 12, 12, 12, 12, 20, 21, 22, + 23, 23, 23, 23, 23, 12, 12, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 12, 24, 12, 25, 34, 35, 35, 25, - 81, 26, 26, 27, 27, 27, 34, 35, 35, 82, - 28, 36, 36, 36, 36, 159, 29, 28, 28, 28, - 28, 12, 13, 14, 15, 16, 30, 17, 18, 30, - 30, 30, 26, 30, 30, 30, 12, 20, 21, 22, - 31, 31, 31, 31, 31, 32, 12, 31, 31, 31, + 23, 23, 23, 12, 24, 12, 25, 34, 35, 35, + 25, 81, 26, 26, 27, 27, 27, 34, 35, 35, + 82, 28, 36, 36, 36, 53, 54, 29, 28, 28, + 28, 28, 12, 13, 14, 13, 15, 16, 30, 17, + 18, 30, 30, 30, 26, 30, 30, 30, 12, 20, + 21, 22, 31, 31, 31, 31, 31, 32, 12, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, - 31, 31, 31, 12, 24, 12, 39, 41, 45, 47, - 53, 54, 48, 56, 57, 61, 61, 47, 66, 45, - 48, 66, 66, 66, 39, 46, 40, 49, 59, 50, - 158, 51, 122, 52, 157, 49, 46, 50, 136, 63, - 137, 52, 156, 43, 40, 62, 65, 65, 65, 59, - 61, 61, 123, 65, 75, 69, 69, 69, 36, 36, - 65, 65, 65, 65, 70, 71, 72, 69, 69, 69, - 45, 46, 61, 61, 109, 77, 70, 71, 93, 110, - 68, 70, 71, 85, 85, 85, 66, 46, 155, 66, - - 66, 66, 69, 69, 69, 122, 59, 100, 100, 61, - 61, 70, 71, 100, 100, 148, 112, 154, 85, 85, - 85, 61, 61, 129, 129, 123, 129, 129, 135, 135, - 135, 142, 142, 148, 143, 149, 153, 135, 135, 135, - 142, 142, 160, 143, 152, 151, 150, 146, 145, 144, - 141, 140, 139, 149, 38, 38, 38, 38, 38, 38, - 38, 38, 42, 138, 134, 133, 42, 42, 44, 44, - 44, 44, 44, 44, 44, 44, 58, 58, 58, 58, - 64, 132, 64, 66, 131, 130, 66, 160, 66, 66, - 67, 128, 127, 67, 67, 67, 67, 73, 126, 73, - - 73, 76, 76, 76, 76, 76, 76, 76, 76, 78, - 78, 78, 78, 78, 78, 78, 78, 91, 125, 91, - 92, 124, 92, 92, 120, 92, 92, 121, 121, 121, - 121, 121, 121, 121, 121, 147, 147, 147, 147, 147, - 147, 147, 147, 119, 118, 117, 116, 115, 47, 114, - 110, 113, 111, 108, 107, 106, 48, 105, 104, 89, - 103, 102, 101, 99, 98, 97, 96, 95, 94, 79, - 77, 90, 89, 88, 59, 87, 86, 59, 84, 83, - 80, 79, 77, 74, 160, 60, 59, 55, 37, 160, - 33, 25, 26, 25, 11, 160, 160, 160, 160, 160, + 31, 31, 31, 31, 31, 12, 24, 12, 36, 36, + 36, 39, 41, 45, 47, 56, 57, 48, 61, 47, + 39, 159, 48, 66, 61, 45, 66, 66, 66, 158, + 46, 40, 49, 59, 50, 157, 51, 49, 52, 50, + 40, 63, 46, 52, 36, 36, 36, 156, 43, 62, + 65, 65, 65, 59, 136, 68, 137, 65, 75, 69, + 69, 69, 70, 71, 65, 65, 65, 65, 70, 71, + 72, 69, 69, 69, 61, 46, 45, 155, 154, 66, + 70, 71, 66, 66, 66, 122, 85, 85, 85, 59, + + 69, 69, 69, 46, 77, 100, 109, 93, 100, 70, + 71, 110, 112, 122, 129, 123, 153, 85, 85, 85, + 135, 135, 135, 148, 148, 160, 135, 135, 135, 152, + 142, 142, 142, 123, 143, 142, 142, 142, 151, 143, + 150, 146, 145, 149, 149, 38, 38, 38, 38, 38, + 38, 38, 38, 42, 144, 141, 140, 42, 42, 44, + 44, 44, 44, 44, 44, 44, 44, 58, 58, 58, + 58, 64, 139, 64, 66, 138, 134, 66, 133, 66, + 66, 67, 132, 131, 67, 67, 67, 67, 73, 130, + 73, 73, 76, 76, 76, 76, 76, 76, 76, 76, + + 78, 78, 78, 78, 78, 78, 78, 78, 91, 160, + 91, 92, 129, 92, 92, 128, 92, 92, 121, 121, + 121, 121, 121, 121, 121, 121, 147, 147, 147, 147, + 147, 147, 147, 147, 127, 126, 125, 124, 61, 61, + 120, 119, 118, 117, 116, 115, 47, 114, 110, 113, + 111, 108, 107, 106, 48, 105, 104, 89, 103, 102, + 101, 99, 98, 97, 96, 95, 94, 79, 77, 90, + 89, 88, 59, 87, 86, 59, 84, 83, 80, 79, + 77, 74, 160, 60, 59, 55, 37, 160, 33, 25, + 26, 25, 11, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160 + 160, 160, 160, 160, 160, 160, 160, 160, 160 } ; -static yyconst flex_int16_t yy_chk[441] = +static yyconst flex_int16_t yy_chk[440] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 4, 9, 9, 9, 10, - 50, 4, 5, 5, 5, 5, 10, 10, 10, 50, - 5, 13, 13, 14, 14, 158, 5, 5, 5, 5, - 5, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 1, 1, 1, 1, 1, 1, 4, 9, 9, 9, + 10, 50, 4, 5, 5, 5, 5, 10, 10, 10, + 50, 5, 13, 13, 13, 20, 20, 5, 5, 5, + 5, 5, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 16, 17, 18, 19, - 20, 20, 19, 22, 22, 25, 25, 26, 31, 44, - 26, 31, 31, 31, 38, 18, 16, 19, 31, 19, - 157, 19, 112, 19, 156, 26, 44, 26, 130, 26, - 130, 26, 155, 17, 38, 25, 28, 28, 28, 28, - 33, 33, 112, 28, 46, 34, 34, 34, 36, 36, - 28, 28, 28, 28, 34, 34, 34, 35, 35, 35, - 75, 46, 61, 61, 98, 77, 35, 35, 77, 98, - 33, 91, 91, 61, 61, 61, 67, 75, 152, 67, - - 67, 67, 69, 69, 69, 121, 67, 85, 85, 113, - 113, 69, 69, 100, 100, 143, 100, 151, 85, 85, - 85, 114, 114, 122, 122, 121, 129, 129, 135, 135, - 135, 138, 138, 147, 138, 143, 150, 129, 129, 129, - 142, 142, 149, 142, 146, 145, 144, 141, 140, 139, - 137, 136, 134, 147, 161, 161, 161, 161, 161, 161, - 161, 161, 162, 133, 128, 127, 162, 162, 163, 163, - 163, 163, 163, 163, 163, 163, 164, 164, 164, 164, - 165, 126, 165, 166, 125, 124, 166, 123, 166, 166, - 167, 120, 119, 167, 167, 167, 167, 168, 118, 168, - - 168, 169, 169, 169, 169, 169, 169, 169, 169, 170, - 170, 170, 170, 170, 170, 170, 170, 171, 117, 171, - 172, 116, 172, 172, 111, 172, 172, 173, 173, 173, - 173, 173, 173, 173, 173, 174, 174, 174, 174, 174, - 174, 174, 174, 110, 109, 108, 107, 106, 105, 103, - 102, 101, 99, 97, 96, 95, 94, 93, 92, 90, - 88, 87, 86, 84, 83, 82, 81, 80, 79, 78, - 76, 71, 70, 68, 65, 63, 62, 58, 52, 51, - 49, 48, 47, 43, 40, 24, 23, 21, 15, 11, - 8, 6, 3, 2, 160, 160, 160, 160, 160, 160, + 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, + 14, 16, 17, 18, 19, 22, 22, 19, 25, 26, + 38, 158, 26, 31, 33, 44, 31, 31, 31, 157, + 18, 16, 19, 31, 19, 156, 19, 26, 19, 26, + 38, 26, 44, 26, 36, 36, 36, 155, 17, 25, + 28, 28, 28, 28, 130, 33, 130, 28, 46, 34, + 34, 34, 91, 91, 28, 28, 28, 28, 34, 34, + 34, 35, 35, 35, 61, 46, 75, 152, 151, 67, + 35, 35, 67, 67, 67, 112, 61, 61, 61, 67, + + 69, 69, 69, 75, 77, 85, 98, 77, 100, 69, + 69, 98, 100, 121, 129, 112, 150, 85, 85, 85, + 135, 135, 135, 143, 147, 149, 129, 129, 129, 146, + 138, 138, 138, 121, 138, 142, 142, 142, 145, 142, + 144, 141, 140, 143, 147, 161, 161, 161, 161, 161, + 161, 161, 161, 162, 139, 137, 136, 162, 162, 163, + 163, 163, 163, 163, 163, 163, 163, 164, 164, 164, + 164, 165, 134, 165, 166, 133, 128, 166, 127, 166, + 166, 167, 126, 125, 167, 167, 167, 167, 168, 124, + 168, 168, 169, 169, 169, 169, 169, 169, 169, 169, + + 170, 170, 170, 170, 170, 170, 170, 170, 171, 123, + 171, 172, 122, 172, 172, 120, 172, 172, 173, 173, + 173, 173, 173, 173, 173, 173, 174, 174, 174, 174, + 174, 174, 174, 174, 119, 118, 117, 116, 114, 113, + 111, 110, 109, 108, 107, 106, 105, 103, 102, 101, + 99, 97, 96, 95, 94, 93, 92, 90, 88, 87, + 86, 84, 83, 82, 81, 80, 79, 78, 76, 71, + 70, 68, 65, 63, 62, 58, 52, 51, 49, 48, + 47, 43, 40, 24, 23, 21, 15, 11, 8, 6, + 3, 2, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160 + 160, 160, 160, 160, 160, 160, 160, 160, 160 } ; static yy_state_type yy_last_accepting_state; diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped index 4af55900a15b..ee1d8c3042fb 100644 --- a/scripts/dtc/dtc-parser.tab.c_shipped +++ b/scripts/dtc/dtc-parser.tab.c_shipped @@ -1,10 +1,8 @@ +/* A Bison parser, made by GNU Bison 2.5. */ -/* A Bison parser, made by GNU Bison 2.4.1. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C +/* Bison implementation for Yacc-like parsers in C - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. + Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -46,7 +44,7 @@ #define YYBISON 1 /* Bison version. */ -#define YYBISON_VERSION "2.4.1" +#define YYBISON_VERSION "2.5" /* Skeleton name. */ #define YYSKELETON_NAME "yacc.c" @@ -67,7 +65,7 @@ /* Copy the first part of user declarations. */ -/* Line 189 of yacc.c */ +/* Line 268 of yacc.c */ #line 21 "dtc-parser.y" #include <stdio.h> @@ -88,8 +86,8 @@ static unsigned long long eval_literal(const char *s, int base, int bits); static unsigned char eval_char_literal(const char *s); -/* Line 189 of yacc.c */ -#line 93 "dtc-parser.tab.c" +/* Line 268 of yacc.c */ +#line 91 "dtc-parser.tab.c" /* Enabling traces. */ #ifndef YYDEBUG @@ -147,7 +145,7 @@ static unsigned char eval_char_literal(const char *s); typedef union YYSTYPE { -/* Line 214 of yacc.c */ +/* Line 293 of yacc.c */ #line 40 "dtc-parser.y" char *propnodename; @@ -171,8 +169,8 @@ typedef union YYSTYPE -/* Line 214 of yacc.c */ -#line 176 "dtc-parser.tab.c" +/* Line 293 of yacc.c */ +#line 174 "dtc-parser.tab.c" } YYSTYPE; # define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ @@ -183,8 +181,8 @@ typedef union YYSTYPE /* Copy the second part of user declarations. */ -/* Line 264 of yacc.c */ -#line 188 "dtc-parser.tab.c" +/* Line 343 of yacc.c */ +#line 186 "dtc-parser.tab.c" #ifdef short # undef short @@ -234,7 +232,7 @@ typedef short int yytype_int16; #define YYSIZE_MAXIMUM ((YYSIZE_T) -1) #ifndef YY_ -# if YYENABLE_NLS +# if defined YYENABLE_NLS && YYENABLE_NLS # if ENABLE_NLS # include <libintl.h> /* INFRINGES ON USER NAME SPACE */ # define YY_(msgid) dgettext ("bison-runtime", msgid) @@ -287,11 +285,11 @@ YYID (yyi) # define alloca _alloca # else # define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) # include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 +# ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 # endif # endif # endif @@ -314,24 +312,24 @@ YYID (yyi) # ifndef YYSTACK_ALLOC_MAXIMUM # define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM # endif -# if (defined __cplusplus && ! defined _STDLIB_H \ +# if (defined __cplusplus && ! defined EXIT_SUCCESS \ && ! ((defined YYMALLOC || defined malloc) \ && (defined YYFREE || defined free))) # include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 +# ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 # endif # endif # ifndef YYMALLOC # define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ # endif # endif # ifndef YYFREE # define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ +# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) void free (void *); /* INFRINGES ON USER NAME SPACE */ # endif @@ -360,23 +358,7 @@ union yyalloc ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ + YYSTACK_GAP_MAXIMUM) -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif +# define YYCOPY_NEEDED 1 /* Relocate STACK from its old location to the new one. The local variables YYSIZE and YYSTACKSIZE give the old and new number of @@ -396,6 +378,26 @@ union yyalloc #endif +#if defined YYCOPY_NEEDED && YYCOPY_NEEDED +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif +#endif /* !YYCOPY_NEEDED */ + /* YYFINAL -- State number of the termination state. */ #define YYFINAL 4 /* YYLAST -- Last index in YYTABLE. */ @@ -571,8 +573,8 @@ static const yytype_uint8 yyr2[] = 2, 0, 2, 2, 0, 2, 2, 2, 3, 2 }; -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero +/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM. + Performed when YYTABLE doesn't specify something else to do. Zero means the default is an error. */ static const yytype_uint8 yydefact[] = { @@ -633,8 +635,7 @@ static const yytype_int8 yypgoto[] = /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ + number is the opposite. If YYTABLE_NINF, syntax error. */ #define YYTABLE_NINF -1 static const yytype_uint8 yytable[] = { @@ -654,6 +655,12 @@ static const yytype_uint8 yytable[] = 137, 0, 73, 139 }; +#define yypact_value_is_default(yystate) \ + ((yystate) == (-78)) + +#define yytable_value_is_error(yytable_value) \ + YYID (0) + static const yytype_int16 yycheck[] = { 5, 38, 39, 17, 18, 19, 12, 12, 17, 18, @@ -705,9 +712,18 @@ static const yytype_uint8 yystos[] = /* Like YYERROR except do call yyerror. This remains here temporarily to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ + Once GCC version 2 has supplanted version 1, this can go. However, + YYFAIL appears to be in use. Nevertheless, it is formally deprecated + in Bison 2.4.2's NEWS entry, where a plan to phase it out is + discussed. */ #define YYFAIL goto yyerrlab +#if defined YYFAIL + /* This is here to suppress warnings from the GCC cpp's + -Wunused-macros. Normally we don't worry about that warning, but + some users do, and we want to make it easy for users to remove + YYFAIL uses, which will produce warnings from Bison 2.5. */ +#endif #define YYRECOVERING() (!!yyerrstatus) @@ -717,7 +733,6 @@ do \ { \ yychar = (Token); \ yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ YYPOPSTACK (1); \ goto yybackup; \ } \ @@ -759,19 +774,10 @@ while (YYID (0)) #endif -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ +/* This macro is provided for backward compatibility. */ #ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) #endif @@ -963,7 +969,6 @@ int yydebug; # define YYMAXDEPTH 10000 #endif - #if YYERROR_VERBOSE @@ -1066,115 +1071,142 @@ yytnamerr (char *yyres, const char *yystr) } # endif -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; +/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message + about the unexpected token YYTOKEN for the state stack whose top is + YYSSP. - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else + Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is + not large enough to hold the message. In that case, also set + *YYMSG_ALLOC to the required number of bytes. Return 2 if the + required number of bytes is too large to store. */ +static int +yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, + yytype_int16 *yyssp, int yytoken) +{ + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytoken]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + /* Internationalized format string. */ + const char *yyformat = 0; + /* Arguments of yyformat. */ + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + /* Number of reported tokens (one for the "unexpected", one per + "expected"). */ + int yycount = 0; + + /* There are many possibilities here to consider: + - Assume YYFAIL is not used. It's too flawed to consider. See + <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html> + for details. YYERROR is fine as it does not invoke this + function. + - If this state is a consistent state with a default action, then + the only way this function was invoked is if the default action + is an error action. In that case, don't check for expected + tokens because there are none. + - The only way there can be no lookahead present (in yychar) is if + this state is a consistent state with a default action. Thus, + detecting the absence of a lookahead is sufficient to determine + that there is no unexpected or expected token to report. In that + case, just report a simple "syntax error". + - Don't assume there isn't a lookahead just because this state is a + consistent state with a default action. There might have been a + previous inconsistent state, consistent state with a non-default + action, or user semantic action that manipulated yychar. + - Of course, the expected token list depends on states to have + correct lookahead information, and it depends on the parser not + to perform extra reductions after fetching a lookahead from the + scanner and before detecting a syntax error. Thus, state merging + (from LALR or IELR) and default reductions corrupt the expected + token list. However, the list is correct for canonical LR with + one exception: it will still contain any token that will not be + accepted due to an error action in a later state. + */ + if (yytoken != YYEMPTY) { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } + int yyn = yypact[*yyssp]; + yyarg[yycount++] = yytname[yytoken]; + if (!yypact_value_is_default (yyn)) + { + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. In other words, skip the first -YYN actions for + this state because they are default actions. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yyx; + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR + && !yytable_value_is_error (yytable[yyx + yyn])) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + if (! (yysize <= yysize1 + && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) + return 2; + yysize = yysize1; + } + } + } - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; + switch (yycount) + { +# define YYCASE_(N, S) \ + case N: \ + yyformat = S; \ + break + YYCASE_(0, YY_("syntax error")); + YYCASE_(1, YY_("syntax error, unexpected %s")); + YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s")); + YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s")); + YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s")); + YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s")); +# undef YYCASE_ + } - if (yysize_overflow) - return YYSIZE_MAXIMUM; + yysize1 = yysize + yystrlen (yyformat); + if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) + return 2; + yysize = yysize1; - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; + if (*yymsg_alloc < yysize) + { + *yymsg_alloc = 2 * yysize; + if (! (yysize <= *yymsg_alloc + && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM)) + *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM; + return 1; } + + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + { + char *yyp = *yymsg; + int yyi = 0; + while ((*yyp = *yyformat) != '\0') + if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyformat += 2; + } + else + { + yyp++; + yyformat++; + } + } + return 0; } #endif /* YYERROR_VERBOSE */ - /*-----------------------------------------------. | Release the memory associated to this symbol. | @@ -1207,6 +1239,7 @@ yydestruct (yymsg, yytype, yyvaluep) } } + /* Prevent warnings from -Wmissing-prototypes. */ #ifdef YYPARSE_PARAM #if defined __STDC__ || defined __cplusplus @@ -1233,10 +1266,9 @@ YYSTYPE yylval; int yynerrs; - -/*-------------------------. -| yyparse or yypush_parse. | -`-------------------------*/ +/*----------. +| yyparse. | +`----------*/ #ifdef YYPARSE_PARAM #if (defined __STDC__ || defined __C99__FUNC__ \ @@ -1260,8 +1292,6 @@ yyparse () #endif #endif { - - int yystate; /* Number of tokens to shift before error messages enabled. */ int yyerrstatus; @@ -1416,7 +1446,7 @@ yybackup: /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) + if (yypact_value_is_default (yyn)) goto yydefault; /* Not known => get a lookahead token if don't already have one. */ @@ -1447,8 +1477,8 @@ yybackup: yyn = yytable[yyn]; if (yyn <= 0) { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; + if (yytable_value_is_error (yyn)) + goto yyerrlab; yyn = -yyn; goto yyreduce; } @@ -1503,72 +1533,72 @@ yyreduce: { case 2: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 110 "dtc-parser.y" { the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), guess_boot_cpuid((yyvsp[(4) - (4)].node))); - ;} + } break; case 3: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 118 "dtc-parser.y" { (yyval.re) = NULL; - ;} + } break; case 4: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 122 "dtc-parser.y" { (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} + } break; case 5: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 129 "dtc-parser.y" { (yyval.re) = build_reserve_entry((yyvsp[(2) - (4)].integer), (yyvsp[(3) - (4)].integer)); - ;} + } break; case 6: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 133 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].re)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.re) = (yyvsp[(2) - (2)].re); - ;} + } break; case 7: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 141 "dtc-parser.y" { (yyval.node) = name_node((yyvsp[(2) - (2)].node), ""); - ;} + } break; case 8: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 145 "dtc-parser.y" { (yyval.node) = merge_nodes((yyvsp[(1) - (3)].node), (yyvsp[(3) - (3)].node)); - ;} + } break; case 9: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 149 "dtc-parser.y" { struct node *target = get_node_by_ref((yyvsp[(1) - (3)].node), (yyvsp[(2) - (3)].labelref)); @@ -1578,12 +1608,12 @@ yyreduce: else print_error("label or path, '%s', not found", (yyvsp[(2) - (3)].labelref)); (yyval.node) = (yyvsp[(1) - (3)].node); - ;} + } break; case 10: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 159 "dtc-parser.y" { struct node *target = get_node_by_ref((yyvsp[(1) - (4)].node), (yyvsp[(3) - (4)].labelref)); @@ -1594,112 +1624,112 @@ yyreduce: delete_node(target); (yyval.node) = (yyvsp[(1) - (4)].node); - ;} + } break; case 11: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 173 "dtc-parser.y" { (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} + } break; case 12: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 180 "dtc-parser.y" { (yyval.proplist) = NULL; - ;} + } break; case 13: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 184 "dtc-parser.y" { (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} + } break; case 14: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 191 "dtc-parser.y" { (yyval.prop) = build_property((yyvsp[(1) - (4)].propnodename), (yyvsp[(3) - (4)].data)); - ;} + } break; case 15: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 195 "dtc-parser.y" { (yyval.prop) = build_property((yyvsp[(1) - (2)].propnodename), empty_data); - ;} + } break; case 16: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 199 "dtc-parser.y" { (yyval.prop) = build_property_delete((yyvsp[(2) - (3)].propnodename)); - ;} + } break; case 17: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 203 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].prop)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.prop) = (yyvsp[(2) - (2)].prop); - ;} + } break; case 18: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 211 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} + } break; case 19: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 215 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (3)].data), (yyvsp[(2) - (3)].array).data); - ;} + } break; case 20: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 219 "dtc-parser.y" { (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} + } break; case 21: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 223 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 22: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 227 "dtc-parser.y" { FILE *f = srcfile_relative_open((yyvsp[(4) - (9)].data).val, NULL); @@ -1716,12 +1746,12 @@ yyreduce: (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); fclose(f); - ;} + } break; case 23: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 244 "dtc-parser.y" { FILE *f = srcfile_relative_open((yyvsp[(4) - (5)].data).val, NULL); @@ -1731,48 +1761,48 @@ yyreduce: (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); fclose(f); - ;} + } break; case 24: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 254 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 25: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 261 "dtc-parser.y" { (yyval.data) = empty_data; - ;} + } break; case 26: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 265 "dtc-parser.y" { (yyval.data) = (yyvsp[(1) - (2)].data); - ;} + } break; case 27: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 269 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 28: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 276 "dtc-parser.y" { (yyval.array).data = empty_data; @@ -1787,22 +1817,22 @@ yyreduce: " are currently supported"); (yyval.array).bits = 32; } - ;} + } break; case 29: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 291 "dtc-parser.y" { (yyval.array).data = empty_data; (yyval.array).bits = 32; - ;} + } break; case 30: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 296 "dtc-parser.y" { if ((yyvsp[(1) - (2)].array).bits < 64) { @@ -1822,12 +1852,12 @@ yyreduce: } (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, (yyvsp[(2) - (2)].integer), (yyvsp[(1) - (2)].array).bits); - ;} + } break; case 31: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 316 "dtc-parser.y" { uint64_t val = ~0ULL >> (64 - (yyvsp[(1) - (2)].array).bits); @@ -1841,288 +1871,299 @@ yyreduce: "arrays with 32-bit elements."); (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, val, (yyvsp[(1) - (2)].array).bits); - ;} + } break; case 32: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 330 "dtc-parser.y" { (yyval.array).data = data_add_marker((yyvsp[(1) - (2)].array).data, LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 33: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 337 "dtc-parser.y" { (yyval.integer) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} + } break; case 34: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 341 "dtc-parser.y" { (yyval.integer) = eval_char_literal((yyvsp[(1) - (1)].literal)); - ;} + } break; case 35: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 345 "dtc-parser.y" { (yyval.integer) = (yyvsp[(2) - (3)].integer); - ;} + } break; case 38: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 356 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (5)].integer) ? (yyvsp[(3) - (5)].integer) : (yyvsp[(5) - (5)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (5)].integer) ? (yyvsp[(3) - (5)].integer) : (yyvsp[(5) - (5)].integer); } break; case 40: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 361 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) || (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) || (yyvsp[(3) - (3)].integer); } break; case 42: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 366 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) && (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) && (yyvsp[(3) - (3)].integer); } break; case 44: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 371 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) | (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) | (yyvsp[(3) - (3)].integer); } break; case 46: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 376 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) ^ (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) ^ (yyvsp[(3) - (3)].integer); } break; case 48: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 381 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) & (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) & (yyvsp[(3) - (3)].integer); } break; case 50: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 386 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) == (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) == (yyvsp[(3) - (3)].integer); } break; case 51: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 387 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) != (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) != (yyvsp[(3) - (3)].integer); } break; case 53: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 392 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) < (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) < (yyvsp[(3) - (3)].integer); } break; case 54: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 393 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) > (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) > (yyvsp[(3) - (3)].integer); } break; case 55: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 394 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) <= (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) <= (yyvsp[(3) - (3)].integer); } break; case 56: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 395 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >= (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) >= (yyvsp[(3) - (3)].integer); } break; case 57: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 399 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) << (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) << (yyvsp[(3) - (3)].integer); } break; case 58: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 400 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >> (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) >> (yyvsp[(3) - (3)].integer); } break; case 60: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 405 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) + (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) + (yyvsp[(3) - (3)].integer); } break; case 61: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 406 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) - (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) - (yyvsp[(3) - (3)].integer); } break; case 63: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 411 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) * (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) * (yyvsp[(3) - (3)].integer); } break; case 64: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 412 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) / (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) / (yyvsp[(3) - (3)].integer); } break; case 65: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 413 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) % (yyvsp[(3) - (3)].integer); ;} + { (yyval.integer) = (yyvsp[(1) - (3)].integer) % (yyvsp[(3) - (3)].integer); } break; case 68: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 419 "dtc-parser.y" - { (yyval.integer) = -(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = -(yyvsp[(2) - (2)].integer); } break; case 69: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 420 "dtc-parser.y" - { (yyval.integer) = ~(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = ~(yyvsp[(2) - (2)].integer); } break; case 70: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 421 "dtc-parser.y" - { (yyval.integer) = !(yyvsp[(2) - (2)].integer); ;} + { (yyval.integer) = !(yyvsp[(2) - (2)].integer); } break; case 71: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 426 "dtc-parser.y" { (yyval.data) = empty_data; - ;} + } break; case 72: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 430 "dtc-parser.y" { (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} + } break; case 73: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 434 "dtc-parser.y" { (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} + } break; case 74: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 441 "dtc-parser.y" { (yyval.nodelist) = NULL; - ;} + } break; case 75: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 445 "dtc-parser.y" { (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} + } break; case 76: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 449 "dtc-parser.y" { print_error("syntax error: properties must precede subnodes"); YYERROR; - ;} + } break; case 77: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 457 "dtc-parser.y" { (yyval.node) = name_node((yyvsp[(2) - (2)].node), (yyvsp[(1) - (2)].propnodename)); - ;} + } break; case 78: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 461 "dtc-parser.y" { (yyval.node) = name_node(build_node_delete(), (yyvsp[(2) - (3)].propnodename)); - ;} + } break; case 79: -/* Line 1455 of yacc.c */ +/* Line 1806 of yacc.c */ #line 465 "dtc-parser.y" { add_label(&(yyvsp[(2) - (2)].node)->labels, (yyvsp[(1) - (2)].labelref)); (yyval.node) = (yyvsp[(2) - (2)].node); - ;} + } break; -/* Line 1455 of yacc.c */ -#line 2124 "dtc-parser.tab.c" +/* Line 1806 of yacc.c */ +#line 2154 "dtc-parser.tab.c" default: break; } + /* User semantic actions sometimes alter yychar, and that requires + that yytoken be updated with the new translation. We take the + approach of translating immediately before every use of yytoken. + One alternative is translating here after every semantic action, + but that translation would be missed if the semantic action invokes + YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or + if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an + incorrect destructor might then be invoked immediately. In the + case of YYERROR or YYBACKUP, subsequent parser actions might lead + to an incorrect destructor call or verbose syntax error message + before the lookahead is translated. */ YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); YYPOPSTACK (yylen); @@ -2150,6 +2191,10 @@ yyreduce: | yyerrlab -- here on detecting error | `------------------------------------*/ yyerrlab: + /* Make sure we have latest lookahead translation. See comments at + user semantic actions for why this is necessary. */ + yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar); + /* If not already recovering from an error, report this error. */ if (!yyerrstatus) { @@ -2157,37 +2202,36 @@ yyerrlab: #if ! YYERROR_VERBOSE yyerror (YY_("syntax error")); #else +# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \ + yyssp, yytoken) { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } + char const *yymsgp = YY_("syntax error"); + int yysyntax_error_status; + yysyntax_error_status = YYSYNTAX_ERROR; + if (yysyntax_error_status == 0) + yymsgp = yymsg; + else if (yysyntax_error_status == 1) + { + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc); + if (!yymsg) + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + yysyntax_error_status = 2; + } + else + { + yysyntax_error_status = YYSYNTAX_ERROR; + yymsgp = yymsg; + } + } + yyerror (yymsgp); + if (yysyntax_error_status == 2) + goto yyexhaustedlab; } +# undef YYSYNTAX_ERROR #endif } @@ -2246,7 +2290,7 @@ yyerrlab1: for (;;) { yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) + if (!yypact_value_is_default (yyn)) { yyn += YYTERROR; if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) @@ -2305,8 +2349,13 @@ yyexhaustedlab: yyreturn: if (yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval); + { + /* Make sure we have latest lookahead translation. See comments at + user semantic actions for why this is necessary. */ + yytoken = YYTRANSLATE (yychar); + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval); + } /* Do not reclaim the symbols of the rule which action triggered this YYABORT or YYACCEPT. */ YYPOPSTACK (yylen); @@ -2331,7 +2380,7 @@ yyreturn: -/* Line 1675 of yacc.c */ +/* Line 2067 of yacc.c */ #line 471 "dtc-parser.y" diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped index 9d2dce41211f..25d3b88c6132 100644 --- a/scripts/dtc/dtc-parser.tab.h_shipped +++ b/scripts/dtc/dtc-parser.tab.h_shipped @@ -1,10 +1,8 @@ +/* A Bison parser, made by GNU Bison 2.5. */ -/* A Bison parser, made by GNU Bison 2.4.1. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C +/* Bison interface for Yacc-like parsers in C - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. + Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -70,7 +68,7 @@ typedef union YYSTYPE { -/* Line 1676 of yacc.c */ +/* Line 2068 of yacc.c */ #line 40 "dtc-parser.y" char *propnodename; @@ -94,8 +92,8 @@ typedef union YYSTYPE -/* Line 1676 of yacc.c */ -#line 99 "dtc-parser.tab.h" +/* Line 2068 of yacc.c */ +#line 97 "dtc-parser.tab.h" } YYSTYPE; # define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index ccfa383f1fda..f92818155958 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1649,6 +1649,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) } if (!snd_pcm_stream_linked(substream)) { substream->group = group; + group = NULL; spin_lock_init(&substream->group->lock); INIT_LIST_HEAD(&substream->group->substreams); list_add_tail(&substream->link_list, &substream->group->substreams); @@ -1663,8 +1664,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) _nolock: snd_card_unref(substream1->pcm->card); fput_light(file, fput_needed); - if (res < 0) - kfree(group); + kfree(group); return res; } diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 030f53c96ec0..987f728718c5 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -193,6 +193,8 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0); static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0); +static DECLARE_TLV_DB_SCALE(mix_tlv, -50, 50, 0); + static const unsigned int limiter_tlv[] = { TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(-3000, 600, 0), @@ -260,7 +262,7 @@ static const char * const hp_gain_num_text[] = { }; static const struct soc_enum hp_gain_enum = - SOC_ENUM_SINGLE(CS42L52_PB_CTL1, 4, + SOC_ENUM_SINGLE(CS42L52_PB_CTL1, 5, ARRAY_SIZE(hp_gain_num_text), hp_gain_num_text); static const char * const beep_pitch_text[] = { @@ -441,7 +443,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 0, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, mix_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 65d09d60b7c6..1514bf845e4b 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -187,14 +187,14 @@ static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol, break; } - - if (found) - snd_soc_dapm_sync(widget->dapm); } - ret = snd_soc_update_bits(widget->codec, reg, val_mask, val); - mutex_unlock(&widget->codec->mutex); + + if (found) + snd_soc_dapm_sync(widget->dapm); + + ret = snd_soc_update_bits_locked(widget->codec, reg, val_mask, val); return ret; } diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index e895d3939eef..100fdadda56a 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1120,7 +1120,8 @@ SND_SOC_DAPM_AIF_IN("AIF3RX2", NULL, 0, ARIZONA_DSP_WIDGETS(DSP1, "DSP1"), SND_SOC_DAPM_VALUE_MUX("AEC Loopback", ARIZONA_DAC_AEC_CONTROL_1, - ARIZONA_AEC_LOOPBACK_ENA, 0, &wm5102_aec_loopback_mux), + ARIZONA_AEC_LOOPBACK_ENA_SHIFT, 0, + &wm5102_aec_loopback_mux), SND_SOC_DAPM_PGA_E("OUT1L", SND_SOC_NOPM, ARIZONA_OUT1L_ENA_SHIFT, 0, NULL, 0, arizona_hp_ev, diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index ba38f0679662..88ad7db52dde 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -503,7 +503,8 @@ SND_SOC_DAPM_PGA("ASRC2R", ARIZONA_ASRC_ENABLE, ARIZONA_ASRC2R_ENA_SHIFT, 0, NULL, 0), SND_SOC_DAPM_VALUE_MUX("AEC Loopback", ARIZONA_DAC_AEC_CONTROL_1, - ARIZONA_AEC_LOOPBACK_ENA, 0, &wm5110_aec_loopback_mux), + ARIZONA_AEC_LOOPBACK_ENA_SHIFT, 0, + &wm5110_aec_loopback_mux), SND_SOC_DAPM_AIF_OUT("AIF1TX1", NULL, 0, ARIZONA_AIF1_TX_ENABLES, ARIZONA_AIF1TX1_ENA_SHIFT, 0), diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index dfd997aaadfc..29e95f93d482 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3836,12 +3836,13 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) ret); } else if (!(ret & WM1811_JACKDET_LVL)) { dev_dbg(codec->dev, "Ignoring removed jack\n"); - return IRQ_HANDLED; + goto out; } } else if (!(reg & WM8958_MICD_STS)) { snd_soc_jack_report(wm8994->micdet[0].jack, 0, SND_JACK_MECHANICAL | SND_JACK_HEADSET | wm8994->btn_mask); + wm8994->mic_detecting = true; goto out; } diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a80c883bb8be..c7051c457b75 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -55,7 +55,8 @@ static int dapm_up_seq[] = { [snd_soc_dapm_clock_supply] = 1, [snd_soc_dapm_micbias] = 2, [snd_soc_dapm_dai_link] = 2, - [snd_soc_dapm_dai] = 3, + [snd_soc_dapm_dai_in] = 3, + [snd_soc_dapm_dai_out] = 3, [snd_soc_dapm_aif_in] = 3, [snd_soc_dapm_aif_out] = 3, [snd_soc_dapm_mic] = 4, @@ -92,7 +93,8 @@ static int dapm_down_seq[] = { [snd_soc_dapm_value_mux] = 9, [snd_soc_dapm_aif_in] = 10, [snd_soc_dapm_aif_out] = 10, - [snd_soc_dapm_dai] = 10, + [snd_soc_dapm_dai_in] = 10, + [snd_soc_dapm_dai_out] = 10, [snd_soc_dapm_dai_link] = 11, [snd_soc_dapm_clock_supply] = 12, [snd_soc_dapm_regulator_supply] = 12, @@ -419,7 +421,8 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_hp: case snd_soc_dapm_mic: case snd_soc_dapm_spk: @@ -820,7 +823,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_out: if (widget->active) { widget->outputs = snd_soc_dapm_suspend_check(widget); return widget->outputs; @@ -916,7 +919,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: if (widget->active) { widget->inputs = snd_soc_dapm_suspend_check(widget); return widget->inputs; @@ -1135,16 +1138,6 @@ static int dapm_generic_check_power(struct snd_soc_dapm_widget *w) return out != 0 && in != 0; } -static int dapm_dai_check_power(struct snd_soc_dapm_widget *w) -{ - DAPM_UPDATE_STAT(w, power_checks); - - if (w->active) - return w->active; - - return dapm_generic_check_power(w); -} - /* Check to see if an ADC has power */ static int dapm_adc_check_power(struct snd_soc_dapm_widget *w) { @@ -2318,7 +2311,8 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_dai_link: list_add(&path->list, &dapm->card->paths); list_add(&path->list_sink, &wsink->sources); @@ -3129,10 +3123,12 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, break; case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: + case snd_soc_dapm_dai_out: w->power_check = dapm_adc_check_power; break; case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: + case snd_soc_dapm_dai_in: w->power_check = dapm_dac_check_power; break; case snd_soc_dapm_pga: @@ -3152,9 +3148,6 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: w->power_check = dapm_supply_check_power; break; - case snd_soc_dapm_dai: - w->power_check = dapm_dai_check_power; - break; default: w->power_check = dapm_always_on_check_power; break; @@ -3375,7 +3368,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, template.reg = SND_SOC_NOPM; if (dai->driver->playback.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_in; template.name = dai->driver->playback.stream_name; template.sname = dai->driver->playback.stream_name; @@ -3393,7 +3386,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, } if (dai->driver->capture.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_out; template.name = dai->driver->capture.stream_name; template.sname = dai->driver->capture.stream_name; @@ -3423,8 +3416,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) /* For each DAI widget... */ list_for_each_entry(dai_w, &card->widgets, list) { - if (dai_w->id != snd_soc_dapm_dai) + switch (dai_w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } dai = dai_w->priv; @@ -3433,8 +3431,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) if (w->dapm != dai_w->dapm) continue; - if (w->id == snd_soc_dapm_dai) + switch (w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: continue; + default: + break; + } if (!w->sname) continue; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 73bb8eefa491..ccb6be4d658d 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -928,8 +928,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream, /* Create any new FE <--> BE connections */ for (i = 0; i < list->num_widgets; i++) { - if (list->widgets[i]->id != snd_soc_dapm_dai) + switch (list->widgets[i]->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } /* is there a valid BE rtd for this widget */ be = dpcm_get_be(card, list->widgets[i], stream); @@ -2011,9 +2016,11 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num) if (cpu_dai->driver->capture.channels_min) capture = 1; } else { - if (codec_dai->driver->playback.channels_min) + if (codec_dai->driver->playback.channels_min && + cpu_dai->driver->playback.channels_min) playback = 1; - if (codec_dai->driver->capture.channels_min) + if (codec_dai->driver->capture.channels_min && + cpu_dai->driver->capture.channels_min) capture = 1; } diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9e9d34871195..fe702076ca46 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2191,7 +2191,7 @@ int initialize_counters(int cpu_id) void allocate_output_buffer() { - output_buffer = calloc(1, (1 + topo.num_cpus) * 128); + output_buffer = calloc(1, (1 + topo.num_cpus) * 256); outp = output_buffer; if (outp == NULL) { perror("calloc"); |