summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-at91/include/mach/board.h55
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h7
-rw-r--r--drivers/ata/pata_at91.c2
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c2
-rw-r--r--drivers/mmc/host/atmel-mci.c2
-rw-r--r--drivers/net/can/at91_can.c3
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.c2
-rw-r--r--drivers/pcmcia/at91_cf.c2
-rw-r--r--drivers/rtc/rtc-at91sam9.c2
-rw-r--r--drivers/spi/spi-atmel.c2
-rw-r--r--drivers/tty/serial/atmel_serial.c2
-rw-r--r--drivers/usb/gadget/at91_udc.c2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2
-rw-r--r--drivers/usb/host/ohci-at91.c2
-rw-r--r--drivers/video/atmel_lcdfb.c2
-rw-r--r--include/linux/platform_data/atmel.h67
16 files changed, 80 insertions, 76 deletions
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index c55a4364ffb4..662451d85fc9 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -31,42 +31,15 @@
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
-#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
#include <linux/platform_data/atmel.h>
/* USB Device */
-struct at91_udc_data {
- int vbus_pin; /* high == host powering us */
- u8 vbus_active_low; /* vbus polarity */
- u8 vbus_polled; /* Use polling, not interrupt */
- int pullup_pin; /* active == D+ pulled up */
- u8 pullup_active_low; /* true == pullup_pin is active low */
-};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* USB High Speed Device */
extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
-struct at91_cf_data {
- int irq_pin; /* I/O IRQ */
- int det_pin; /* Card detect */
- int vcc_pin; /* power switching */
- int rst_pin; /* card reset */
- u8 chipselect; /* EBI Chip Select number */
- u8 flags;
-#define AT91_CF_TRUE_IDE 0x01
-#define AT91_IDE_SWAP_A0_A2 0x02
-};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
@@ -86,16 +59,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
-#define AT91_MAX_USBH_PORTS 3
-struct at91_usbh_data {
- int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
- int overcurrent_pin[AT91_MAX_USBH_PORTS];
- u8 ports; /* number of ports on root hub */
- u8 overcurrent_supported;
- u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
- u8 overcurrent_status[AT91_MAX_USBH_PORTS];
- u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
-};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
@@ -124,13 +87,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin
extern struct platform_device *atmel_default_console_device;
-struct atmel_uart_data {
- int num; /* port num */
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virt. base address, if any */
- struct serial_rs485 rs485; /* rs485 settings */
-};
extern void __init at91_add_device_serial(void);
/*
@@ -173,24 +129,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck);
/* Touchscreen Controller */
-struct at91_tsadcc_data {
- unsigned int adc_clock;
- u8 pendet_debounce;
- u8 ts_sample_hold_time;
-};
extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
/* CAN */
-struct at91_can_data {
- void (*transceiver_switch)(int on);
-};
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
#endif
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 70742ec997f8..dca93450cb0e 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -34,13 +34,6 @@ extern struct platform_device *atmel_default_console_device;
#define ATMEL_USART_CTS 0x02
#define ATMEL_USART_CLK 0x04
-struct atmel_uart_data {
- int num; /* port num */
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
- struct serial_rs485 rs485; /* rs485 settings */
-};
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 53d3770a0b1b..2a96bb2c53ee 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -27,9 +27,9 @@
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
+#include <linux/platform_data/atmel.h>
#include <mach/at91sam9_smc.h>
-#include <mach/board.h>
#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 201b2d2ec1b3..ea392ee138ed 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
#include <mach/cpu.h>
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index ddf096e3803f..868998925826 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/types.h>
+#include <linux/platform_data/atmel.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
@@ -40,7 +41,6 @@
#include <asm/unaligned.h>
#include <mach/cpu.h>
-#include <mach/board.h>
#include "atmel-mci-regs.h"
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index fcff73a73b1d..994b6acd65f4 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -33,12 +33,11 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/platform_data/atmel.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
-#include <mach/board.h>
-
#define AT91_MB_MASK(i) ((1 << (i)) - 1)
/* Common registers */
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 4e980a7886fb..35fc6edbacf8 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -31,6 +31,7 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/phy.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -38,7 +39,6 @@
#include <mach/at91rm9200_emac.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9694c1e783a5..01463c781847 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include <linux/platform_data/atmel.h>
#include <pcmcia/ss.h>
@@ -24,7 +25,6 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 2dfe7a2fb998..e981798e9a9b 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
#include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
-#include <mach/board.h>
#include <mach/at91_rtt.h>
#include <mach/cpu.h>
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 16d6a839c7fa..61fb0ec26f06 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -19,9 +19,9 @@
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
-#include <mach/board.h>
#include <asm/gpio.h>
#include <mach/cpu.h>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3d7e1ee2fa57..5660ec2618a3 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -39,12 +39,12 @@
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
#include <asm/ioctls.h>
#include <asm/mach/serial_at91.h>
-#include <mach/board.h>
#ifdef CONFIG_ARM
#include <mach/cpu.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 89d90b5fb787..a7b042b781d5 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -31,6 +31,7 @@
#include <linux/usb/gadget.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
@@ -38,7 +39,6 @@
#include <asm/irq.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 9a9bced813ed..a7aed84d98c9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -21,9 +21,9 @@
#include <linux/usb/gadget.h>
#include <linux/usb/atmel_usba_udc.h>
#include <linux/delay.h>
+#include <linux/platform_data/atmel.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include "atmel_usba_udc.h"
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 0bf72f943b00..8e62f81ae1ed 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -16,11 +16,11 @@
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#ifndef CONFIG_ARCH_AT91
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 94cac9f9919f..12cf5f31ee8f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -19,8 +19,8 @@
#include <linux/backlight.h>
#include <linux/gfp.h>
#include <linux/module.h>
+#include <linux/platform_data/atmel.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#include <asm/gpio.h>
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index b0f2c56a8ea2..dbd6d53cc270 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -8,6 +8,49 @@
#define __ATMEL_H__
#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
+#include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
+
+ /* USB Device */
+struct at91_udc_data {
+ int vbus_pin; /* high == host powering us */
+ u8 vbus_active_low; /* vbus polarity */
+ u8 vbus_polled; /* Use polling, not interrupt */
+ int pullup_pin; /* active == D+ pulled up */
+ u8 pullup_active_low; /* true == pullup_pin is active low */
+};
+
+ /* Compact Flash */
+struct at91_cf_data {
+ int irq_pin; /* I/O IRQ */
+ int det_pin; /* Card detect */
+ int vcc_pin; /* power switching */
+ int rst_pin; /* card reset */
+ u8 chipselect; /* EBI Chip Select number */
+ u8 flags;
+#define AT91_CF_TRUE_IDE 0x01
+#define AT91_IDE_SWAP_A0_A2 0x02
+};
+
+ /* USB Host */
+#define AT91_MAX_USBH_PORTS 3
+struct at91_usbh_data {
+ int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
+ int overcurrent_pin[AT91_MAX_USBH_PORTS];
+ u8 ports; /* number of ports on root hub */
+ u8 overcurrent_supported;
+ u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
/* NAND / SmartMedia */
struct atmel_nand_data {
@@ -24,4 +67,28 @@ struct atmel_nand_data {
unsigned int num_parts;
};
+ /* Serial */
+struct atmel_uart_data {
+ int num; /* port num */
+ short use_dma_tx; /* use transmit DMA? */
+ short use_dma_rx; /* use receive DMA? */
+ void __iomem *regs; /* virt. base address, if any */
+ struct serial_rs485 rs485; /* rs485 settings */
+};
+
+ /* Touchscreen Controller */
+struct at91_tsadcc_data {
+ unsigned int adc_clock;
+ u8 pendet_debounce;
+ u8 ts_sample_hold_time;
+};
+
+/* CAN */
+struct at91_can_data {
+ void (*transceiver_switch)(int on);
+};
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
#endif /* __ATMEL_H__ */