diff options
| -rw-r--r-- | arch/arm/Kconfig.debug | 57 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/debug-macro.S | 101 |
2 files changed, 56 insertions, 102 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eba36e35bad2..ec25d746b4dd 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -527,6 +527,30 @@ choice Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. + config DEBUG_OMAP1UART1 + bool "Kernel low-level debugging via OMAP1 UART1" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART1. + + config DEBUG_OMAP1UART2 + bool "Kernel low-level debugging via OMAP1 UART2" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART2. + + config DEBUG_OMAP1UART3 + bool "Kernel low-level debugging via OMAP1 UART3" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART3. + config DEBUG_OMAP2UART1 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS @@ -569,6 +593,30 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART + config DEBUG_OMAP7XXUART1 + bool "Kernel low-level debugging via OMAP730 UART1" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART1. + + config DEBUG_OMAP7XXUART2 + bool "Kernel low-level debugging via OMAP730 UART2" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART2. + + config DEBUG_OMAP7XXUART3 + bool "Kernel low-level debugging via OMAP730 UART3" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART3. + config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS @@ -1308,6 +1356,9 @@ config DEBUG_UART_PHYS default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1390,6 +1441,9 @@ config DEBUG_UART_VIRT default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART + default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 + default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 + default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU @@ -1401,7 +1455,8 @@ config DEBUG_UART_VIRT config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X + default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \ + DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 default 2 config DEBUG_UART_8250_WORD diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S deleted file mode 100644 index 5c1a26c9f490..000000000000 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-omap1/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/serial_reg.h> - -#include "serial.h" - - .pushsection .data -omap_uart_phys: .word 0x0 -omap_uart_virt: .word 0x0 - .popsection - - /* - * Note that this code won't work if the bootloader passes - * a wrong machine ID number in r1. To debug, just hardcode - * the desired UART phys and virt addresses temporarily into - * the omap_uart_phys and omap_uart_virt above. - */ - .macro addruart, rp, rv, tmp - - /* Use omap_uart_phys/virt if already configured */ -9: adr \rp, 99f @ get effective addr of 99f - ldr \rv, [\rp] @ get absolute addr of 99f - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys - sub \tmp, \rp, \rv @ make it effective - ldr \rp, [\tmp, #0] @ omap_uart_phys - ldr \rv, [\tmp, #4] @ omap_uart_virt - cmp \rp, #0 @ is port configured? - cmpne \rv, #0 - bne 100f @ already configured - - /* Check the debug UART configuration set in uncompress.h */ - and \rp, pc, #0xff000000 - ldr \rv, =OMAP_UART_INFO_OFS - ldr \rp, [\rp, \rv] - - /* Select the UART to use based on the UART1 scratchpad value */ -10: cmp \rp, #0 @ no port configured? - beq 11f @ if none, try to use UART1 - cmp \rp, #OMAP1UART1 - beq 11f @ configure OMAP1UART1 - cmp \rp, #OMAP1UART2 - beq 12f @ configure OMAP1UART2 - cmp \rp, #OMAP1UART3 - beq 13f @ configure OMAP2UART3 - - /* Configure the UART offset from the phys/virt base */ -11: mov \rp, #0x00fb0000 @ OMAP1UART1 - b 98f -12: mov \rp, #0x00fb0000 @ OMAP1UART1 - orr \rp, \rp, #0x00000800 @ OMAP1UART2 - b 98f -13: mov \rp, #0x00fb0000 @ OMAP1UART1 - orr \rp, \rp, #0x00000800 @ OMAP1UART2 - orr \rp, \rp, #0x00009000 @ OMAP1UART3 - - /* Store both phys and virt address for the uart */ -98: add \rp, \rp, #0xff000000 @ phys base - str \rp, [\tmp, #0] @ omap_uart_phys - sub \rp, \rp, #0xff000000 @ phys base - add \rp, \rp, #0xfe000000 @ virt base - str \rp, [\tmp, #4] @ omap_uart_virt - b 9b - - .align -99: .word . - .word omap_uart_phys - .ltorg - -100: - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)] - and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - beq 1002f - ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)] - and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - bne 1001b -1002: - .endm - - .macro waituart,rd,rx - .endm |