summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-u300/core.c113
-rw-r--r--arch/arm/mach-u300/u300-regs.h165
2 files changed, 112 insertions, 166 deletions
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 8cfca45d3650..6e5744a2b85c 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -22,7 +22,118 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
-#include "u300-regs.h"
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE 0x80000000
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE 0x9f800000
+/* ALE, CLE offset for FSMC NAND */
+#define PLAT_NAND_CLE (1 << 16)
+#define PLAT_NAND_ALE (1 << 17)
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE 0xa0000000
+#define U300_AHB_PER_VIRT_BASE 0xff010000
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE 0xc0000000
+#define U300_FAST_PER_VIRT_BASE 0xff020000
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE 0xc0010000
+#define U300_SLOW_PER_VIRT_BASE 0xff000000
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE 0xffff0000
+#define U300_BOOTROM_VIRT_BASE 0xffff0000
+/* SEMI config base */
+#define U300_SEMI_CONFIG_BASE 0x2FFE0000
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
+/* MMC/SD controller */
+#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
+/* I2C0 controller */
+#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
+/* I2C1 controller */
+#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
+/* SPI controller */
+#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
+/* SYSCON */
+#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
+/* Watchdog */
+#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
+/* UART0 */
+#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
+/* APP side special timer */
+#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
+/* Keypad */
+#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
+/* GPIO */
+#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
+/* RTC */
+#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+/* Bus tracer */
+#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
+/* Genric Timer */
+#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
+/* PPM */
+#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) */
+#define U300_ISP_BASE (0xA0008000)
+/* DMA Controller base */
+#define U300_DMAC_BASE (0xC0020000)
+/* MSL Base */
+#define U300_MSL_BASE (0xc0022000)
+/* APEX Base */
+#define U300_APEX_BASE (0xc0030000)
+/* Video Encoder Base */
+#define U300_VIDEOENC_BASE (0xc0080000)
+/* XGAM Base */
+#define U300_XGAM_BASE (0xd0000000)
/*
* SYSCON addresses applicable to the core machine.
diff --git a/arch/arm/mach-u300/u300-regs.h b/arch/arm/mach-u300/u300-regs.h
deleted file mode 100644
index 0320495efc4d..000000000000
--- a/arch/arm/mach-u300/u300-regs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/u300-regs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic register address definitions in physical memory and
- * some block definitions for core devices like the timer.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_REGS_H
-#define __MACH_U300_REGS_H
-
-/*
- * These are the large blocks of memory allocated for I/O.
- * the defines are used for setting up the I/O memory mapping.
- */
-
-/* NAND Flash CS0 */
-#define U300_NAND_CS0_PHYS_BASE 0x80000000
-
-/* NFIF */
-#define U300_NAND_IF_PHYS_BASE 0x9f800000
-
-/* ALE, CLE offset for FSMC NAND */
-#define PLAT_NAND_CLE (1 << 16)
-#define PLAT_NAND_ALE (1 << 17)
-
-/* AHB Peripherals */
-#define U300_AHB_PER_PHYS_BASE 0xa0000000
-#define U300_AHB_PER_VIRT_BASE 0xff010000
-
-/* FAST Peripherals */
-#define U300_FAST_PER_PHYS_BASE 0xc0000000
-#define U300_FAST_PER_VIRT_BASE 0xff020000
-
-/* SLOW Peripherals */
-#define U300_SLOW_PER_PHYS_BASE 0xc0010000
-#define U300_SLOW_PER_VIRT_BASE 0xff000000
-
-/* Boot ROM */
-#define U300_BOOTROM_PHYS_BASE 0xffff0000
-#define U300_BOOTROM_VIRT_BASE 0xffff0000
-
-/* SEMI config base */
-#define U300_SEMI_CONFIG_BASE 0x2FFE0000
-
-/*
- * AHB peripherals
- */
-
-/* AHB Peripherals Bridge Controller */
-#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
-
-/* Vectored Interrupt Controller 0, servicing 32 interrupts */
-#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
-
-/* Vectored Interrupt Controller 1, servicing 32 interrupts */
-#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
-
-/* Memory Stick Pro (MSPRO) controller */
-#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
-
-/* EMIF Configuration Area */
-#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
-
-
-/*
- * FAST peripherals
- */
-
-/* FAST bridge control */
-#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
-
-/* MMC/SD controller */
-#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
-
-/* PCM I2S0 controller */
-#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
-
-/* PCM I2S1 controller */
-#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
-
-/* I2C0 controller */
-#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
-
-/* I2C1 controller */
-#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
-
-/* SPI controller */
-#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
-
-/* Fast UART1 on U335 only */
-#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
-
-/*
- * SLOW peripherals
- */
-
-/* SLOW bridge control */
-#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
-
-/* SYSCON */
-#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
-
-/* Watchdog */
-#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
-
-/* UART0 */
-#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
-
-/* APP side special timer */
-#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
-
-/* Keypad */
-#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
-
-/* GPIO */
-#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
-
-/* RTC */
-#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-
-/* Bus tracer */
-#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
-
-/* Event handler (hardware queue) */
-#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
-
-/* Genric Timer */
-#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
-
-/* PPM */
-#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
-
-
-/*
- * REST peripherals
- */
-
-/* ISP (image signal processor) */
-#define U300_ISP_BASE (0xA0008000)
-
-/* DMA Controller base */
-#define U300_DMAC_BASE (0xC0020000)
-
-/* MSL Base */
-#define U300_MSL_BASE (0xc0022000)
-
-/* APEX Base */
-#define U300_APEX_BASE (0xc0030000)
-
-/* Video Encoder Base */
-#define U300_VIDEOENC_BASE (0xc0080000)
-
-/* XGAM Base */
-#define U300_XGAM_BASE (0xd0000000)
-
-#endif