summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Samsung/Overview.txt9
-rwxr-xr-xDocumentation/arm/Samsung/clksrc-change-registers.awk1
-rw-r--r--arch/arm/Kconfig21
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/configs/s5pc100_defconfig49
-rw-r--r--arch/arm/mach-s5pc100/Kconfig81
-rw-r--r--arch/arm/mach-s5pc100/Makefile32
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/clock.c1361
-rw-r--r--arch/arm/mach-s5pc100/common.c255
-rw-r--r--arch/arm/mach-s5pc100/common.h30
-rw-r--r--arch/arm/mach-s5pc100/dev-audio.c239
-rw-r--r--arch/arm/mach-s5pc100/dma.c130
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S39
-rw-r--r--arch/arm/mach-s5pc100/include/mach/dma.h26
-rw-r--r--arch/arm/mach-s5pc100/include/mach/entry-macro.S19
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h144
-rw-r--r--arch/arm/mach-s5pc100/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h115
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h137
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-clock.h80
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-gpio.h38
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c264
-rw-r--r--arch/arm/mach-s5pc100/setup-fb-24bpp.c35
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c0.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c1.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-ide.c57
-rw-r--r--arch/arm/mach-s5pc100/setup-keypad.c23
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci-gpio.c70
-rw-r--r--arch/arm/mach-s5pc100/setup-spi.c41
-rw-r--r--arch/arm/plat-samsung/Kconfig10
-rw-r--r--arch/arm/plat-samsung/adc.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h10
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h8
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h7
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p-clock.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h34
-rw-r--r--drivers/irqchip/Kconfig1
39 files changed, 7 insertions, 3454 deletions
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
index 66edb1e8101a..8f7309bad460 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -13,7 +13,6 @@ Introduction
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- - S5PC100
- S5PC110 / S5PV210
@@ -33,7 +32,6 @@ Configuration
A number of configurations are supplied, as there is no current way of
unifying all the SoCs into one kernel.
- s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
@@ -65,13 +63,6 @@ Layout changes
where to simplify the include and dependency issues involved with having
so many different platform directories.
- It was decided to remove plat-s5pc1xx as some of the support was already
- in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
- the only user was the S5PC100. The S5PC100 specific items where moved to
- arch/arm/mach-s5pc100.
-
-
-
Port Contributors
-----------------
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
index 0c50220851fb..d9174fabe37e 100755
--- a/Documentation/arm/Samsung/clksrc-change-registers.awk
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -68,7 +68,6 @@ BEGIN {
while (getline line < ARGV[1] > 0) {
if (line ~ /\#define.*_MASK/ &&
- !(line ~ /S5PC100_EPLL_MASK/) &&
!(line ~ /USB_SIG_MASK/)) {
splitdefine(line, fields)
name = fields[0]
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 48be04bb3baf..f4396fd8d6b9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -758,24 +758,6 @@ config ARCH_S3C64XX
help
Samsung S3C64XX series based systems
-config ARCH_S5PC100
- bool "Samsung S5PC100"
- select ARCH_REQUIRE_GPIOLIB
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
- select SAMSUNG_ATAGS
- select SAMSUNG_WDT_RESET
- help
- Samsung S5PC100 series based systems
-
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -986,8 +968,6 @@ source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
-source "arch/arm/mach-s5pc100/Kconfig"
-
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
@@ -2174,7 +2154,6 @@ menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
def_bool y
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 826b26289be6..d3f470c2201b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -187,7 +187,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
-machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
deleted file mode 100644
index 41bafc94dd85..000000000000
--- a/arch/arm/configs/s5pc100_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PC100=y
-CONFIG_MACH_SMDKC100=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
deleted file mode 100644
index c5e3a969b063..000000000000
--- a/arch/arm/mach-s5pc100/Kconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PC100 CPU
-
-if ARCH_S5PC100
-
-config CPU_S5PC100
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_EXT_INT
- help
- Enable S5PC100 CPU support
-
-config S5PC100_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC100_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5PC100_SETUP_IDE
- bool
- help
- Common setup code for S5PC100 IDE GPIO configurations
-
-config S5PC100_SETUP_KEYPAD
- bool
- help
- Common setup code for KEYPAD GPIO configurations.
-
-config S5PC100_SETUP_SDHCI
- bool
- select S5PC100_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S5PC100 based SDHCI systems
-
-config S5PC100_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config S5PC100_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-config MACH_SMDKC100
- bool "SMDKC100"
- select CPU_S5PC100
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5PC100_SETUP_FB_24BPP
- select S5PC100_SETUP_I2C1
- select S5PC100_SETUP_IDE
- select S5PC100_SETUP_KEYPAD
- select S5PC100_SETUP_SDHCI
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDKC100
-
-endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
deleted file mode 100644
index 118c711f74e8..000000000000
--- a/arch/arm/mach-s5pc100/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# arch/arm/mach-s5pc100/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core
-
-obj-y += common.o clock.o
-
-obj-y += dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
-
-# device support
-
-obj-y += dev-audio.o
-
-obj-y += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
deleted file mode 100644
index 79ece4055b02..000000000000
--- a/arch/arm/mach-s5pc100/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
deleted file mode 100644
index d0dc10ee7729..000000000000
--- a/arch/arm/mach-s5pc100/clock.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clk s5p_clk_otgphy = {
- .name = "otg_phy",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static struct clk *clk_src_mout_href_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_fin_hpll,
-};
-
-static struct clksrc_sources clk_src_mout_href = {
- .sources = clk_src_mout_href_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
-};
-
-static struct clksrc_clk clk_mout_href = {
- .clk = {
- .name = "mout_href",
- },
- .sources = &clk_src_mout_href,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-};
-
-static struct clk *clk_src_mout_48m_list[] = {
- [0] = &clk_xusbxti,
- [1] = &s5p_clk_otgphy,
-};
-
-static struct clksrc_sources clk_src_mout_48m = {
- .sources = clk_src_mout_48m_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
-};
-
-static struct clksrc_clk clk_mout_48m = {
- .clk = {
- .name = "mout_48m",
- },
- .sources = &clk_src_mout_48m,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clk *clk_src_mout_hpll_list[] = {
- [0] = &s5p_clk_27m,
-};
-
-static struct clksrc_sources clk_src_mout_hpll = {
- .sources = clk_src_mout_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- },
- .sources = &clk_src_mout_hpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_apll = {
- .clk = {
- .name = "div_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_arm = {
- .clk = {
- .name = "div_arm",
- .parent = &clk_div_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_d0_bus = {
- .clk = {
- .name = "div_d0_bus",
- .parent = &clk_div_arm.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_pclkd0 = {
- .clk = {
- .name = "div_pclkd0",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_secss = {
- .clk = {
- .name = "div_secss",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_apll2 = {
- .clk = {
- .name = "div_apll2",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
-};
-
-static struct clk *clk_src_mout_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_div_apll2.clk,
-};
-
-static struct clksrc_sources clk_src_mout_am = {
- .sources = clk_src_mout_am_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- },
- .sources = &clk_src_mout_am,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_d1_bus = {
- .clk = {
- .name = "div_d1_bus",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_mpll2 = {
- .clk = {
- .name = "div_mpll2",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_mpll = {
- .clk = {
- .name = "div_mpll",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
-};
-
-static struct clk *clk_src_mout_onenand_list[] = {
- [0] = &clk_div_d0_bus.clk,
- [1] = &clk_div_d1_bus.clk,
-};
-
-static struct clksrc_sources clk_src_mout_onenand = {
- .sources = clk_src_mout_onenand_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- },
- .sources = &clk_src_mout_onenand,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_onenand = {
- .clk = {
- .name = "div_onenand",
- .parent = &clk_mout_onenand.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
-};
-
-static struct clksrc_clk clk_div_pclkd1 = {
- .clk = {
- .name = "div_pclkd1",
- .parent = &clk_div_d1_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_cam = {
- .clk = {
- .name = "div_cam",
- .parent = &clk_div_mpll2.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
-};
-
-static struct clksrc_clk clk_div_hdmi = {
- .clk = {
- .name = "div_hdmi",
- .parent = &clk_mout_hpll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
-};
-
-static u32 epll_div[][4] = {
- { 32750000, 131, 3, 4 },
- { 32768000, 131, 3, 4 },
- { 36000000, 72, 3, 3 },
- { 45000000, 90, 3, 3 },
- { 45158000, 90, 3, 3 },
- { 45158400, 90, 3, 3 },
- { 48000000, 96, 3, 3 },
- { 49125000, 131, 4, 3 },
- { 49152000, 131, 4, 3 },
- { 60000000, 120, 3, 3 },
- { 67737600, 226, 5, 3 },
- { 67738000, 226, 5, 3 },
- { 73800000, 246, 5, 3 },
- { 73728000, 246, 5, 3 },
- { 72000000, 144, 3, 3 },
- { 84000000, 168, 3, 3 },
- { 96000000, 96, 3, 2 },
- { 144000000, 144, 3, 2 },
- { 192000000, 96, 3, 1 }
-};
-
-static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P_EPLL_CON);
-
- epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
- (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
- (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5pc100_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5pc100_epll_set_rate,
-};
-
-static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
-}
-
-static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "cssys",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "secss",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "g2d",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "mdma",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "cfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "nfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "onenandc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sdm",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "seckey",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "modemif",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "otg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "usbhost",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "lcd",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "rotator",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.2",
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "mipi-dsim",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "mipi-csis",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "g3d",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "tv",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "vp",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mixer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "hdmi",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "mfc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "apc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "iec",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "systimer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "watchdog",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "rtc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "irda",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "hsitx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsirx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "ac97",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spdif",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "adc",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "keypad",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 17),
- },
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 6),
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 5),
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 8),
-};
-
-static struct clk clk_48m_spi2 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 9),
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk clk_vclk54m = {
- .name = "vclk_54m",
- .rate = 54000000,
-};
-
-static struct clk clk_i2scdclk0 = {
- .name = "i2s_cdclk0",
-};
-
-static struct clk clk_i2scdclk1 = {
- .name = "i2s_cdclk1",
-};
-
-static struct clk clk_i2scdclk2 = {
- .name = "i2s_cdclk2",
-};
-
-static struct clk clk_pcmcdclk0 = {
- .name = "pcm_cdclk0",
-};
-
-static struct clk clk_pcmcdclk1 = {
- .name = "pcm_cdclk1",
-};
-
-static struct clk *clk_src_group1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll2.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group1 = {
- .sources = clk_src_group1_list,
- .nr_sources = ARRAY_SIZE(clk_src_group1_list),
-};
-
-static struct clk *clk_src_group2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_group2 = {
- .sources = clk_src_group2_list,
- .nr_sources = ARRAY_SIZE(clk_src_group2_list),
-};
-
-static struct clk *clk_src_group3_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk0,
- [4] = &clk_pcmcdclk0,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group3 = {
- .sources = clk_src_group3_list,
- .nr_sources = ARRAY_SIZE(clk_src_group3_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.0",
- .ctrlbit = (1 << 8),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group3,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clk *clk_src_group4_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk1,
- [4] = &clk_pcmcdclk1,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group4 = {
- .sources = clk_src_group4_list,
- .nr_sources = ARRAY_SIZE(clk_src_group4_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.1",
- .ctrlbit = (1 << 9),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group4,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clk *clk_src_group5_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk2,
- [4] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group5 = {
- .sources = clk_src_group5_list,
- .nr_sources = ARRAY_SIZE(clk_src_group5_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.2",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group5,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clk *clk_src_group6_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_vclk54m,
- [2] = &clk_div_hdmi.clk,
-};
-
-static struct clksrc_sources clk_src_group6 = {
- .sources = clk_src_group6_list,
- .nr_sources = ARRAY_SIZE(clk_src_group6_list),
-};
-
-static struct clk *clk_src_group7_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_mout_hpll.clk,
- [3] = &clk_vclk54m,
-};
-
-static struct clksrc_sources clk_src_group7 = {
- .sources = clk_src_group7_list,
- .nr_sources = ARRAY_SIZE(clk_src_group7_list),
-};
-
-static struct clk *clk_src_mmc0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
-};
-
-static struct clksrc_sources clk_src_mmc0 = {
- .sources = clk_src_mmc0_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
-};
-
-static struct clk *clk_src_mmc12_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_mmc12 = {
- .sources = clk_src_mmc12_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
-};
-
-static struct clk *clk_src_irda_usb_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_irda_usb = {
- .sources = clk_src_irda_usb_list,
- .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
-};
-
-static struct clk *clk_src_pwi_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_mout_epll.clk,
- [2] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_pwi = {
- .sources = clk_src_pwi_list,
- .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
-};
-
-static struct clk *clk_sclk_spdif_list[] = {
- [0] = &clk_sclk_audio0.clk,
- [1] = &clk_sclk_audio1.clk,
- [2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clk_src_sclk_spdif = {
- .sources = clk_sclk_spdif_list,
- .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
- .clk = {
- .name = "sclk_spdif",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk1_ctrl,
- .ops = &s5p_sclk_spdif_ops,
- },
- .sources = &clk_src_sclk_spdif,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_mixer",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group6,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
- }, {
- .clk = {
- .name = "sclk_lcd",
- .ctrlbit = (1 << 0),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.0",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.1",
- .ctrlbit = (1 << 2),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.2",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_pwi",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_pwi,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_uhost",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_uart = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group2,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 12),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc0,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 13),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 14),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.0",
- .ctrlbit = (1 << 4),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.1",
- .ctrlbit = (1 << 5),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.2",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_mout_hpll,
- &clk_mout_href,
- &clk_mout_48m,
- &clk_div_apll,
- &clk_div_arm,
- &clk_div_d0_bus,
- &clk_div_pclkd0,
- &clk_div_secss,
- &clk_div_apll2,
- &clk_mout_am,
- &clk_div_d1_bus,
- &clk_div_mpll2,
- &clk_div_mpll,
- &clk_mout_onenand,
- &clk_div_onenand,
- &clk_div_pclkd1,
- &clk_div_cam,
- &clk_div_hdmi,
- &clk_sclk_audio0,
- &clk_sclk_audio1,
- &clk_sclk_audio2,
- &clk_sclk_spdif,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_48m_spi2,
- &clk_i2s0,
- &clk_i2s1,
- &clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uart,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_spi2,
-};
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- unsigned long xtal;
- unsigned long arm;
- unsigned long hclkd0;
- unsigned long hclkd1;
- unsigned long pclkd0;
- unsigned long pclkd1;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long hpll;
- unsigned int ptr;
-
- /* Set S5PC100 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5pc100_epll_ops;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal = clk_get_rate(&clk_xtal);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
- mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
- epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
- hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_mout_hpll.clk.rate = hpll;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-
- arm = clk_get_rate(&clk_div_arm.clk);
- hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
- pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
- hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
- pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
-
- printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
- print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
-
- clk_f.rate = arm;
- clk_h.rate = hclkd1;
- clk_p.rate = pclkd1;
-}
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "tzic",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "intc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "ebi",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "intmem",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sromc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dmc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "chipid",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gpio",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "timers",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 6),
- },
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_i2scdclk0,
- &clk_i2scdclk1,
- &clk_i2scdclk2,
- &clk_pcmcdclk0,
- &clk_pcmcdclk1,
-};
-
-static struct clk_lookup s5pc100_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-void __init s5pc100_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
- s3c_disable_clocks(clk_cdev[ptr], 1);
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
deleted file mode 100644
index 6a41bf7dacf6..000000000000
--- a/arch/arm/mach-s5pc100/common.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Common Codes for S5PC100
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-#include <plat/pwm-core.h>
-#include <plat/spi-core.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC100_VA_OTHERS,
- .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }
-};
-
-static struct samsung_pwm_variant s5pc100_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5pc100_pwm_variant);
-}
-
-/*
- * s5pc100_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s5pc100_pwm_variant);
-}
-
-void __init s5pc100_map_io(void)
-{
- /* initialise device information early */
- s5pc100_default_sdhci0();
- s5pc100_default_sdhci1();
- s5pc100_default_sdhci2();
-
- s3c_adc_setname("s3c64xx-adc");
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_onenand_setname("s5pc100-onenand");
- s3c_fb_setname("s5pc100-fb");
- s3c_cfcon_setname("s5pc100-pata");
-
- s3c64xx_spi_setname("s5pc100-spi");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5pc100_register_clocks();
- s5pc100_setup_clocks();
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-}
-
-void __init s5pc100_init_irq(void)
-{
- u32 vic[] = {~0, ~0, ~0};
-
- /* VIC0, VIC1, and VIC2 are fully populated. */
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct bus_type s5pc100_subsys = {
- .name = "s5pc100-core",
- .dev_name = "s5pc100-core",
-};
-
-static struct device s5pc100_dev = {
- .bus = &s5pc100_subsys,
-};
-
-static int __init s5pc100_core_init(void)
-{
- return subsys_system_register(&s5pc100_subsys, NULL);
-}
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
- printk(KERN_INFO "S5PC100: Initializing architecture\n");
- return device_register(&s5pc100_dev);
-}
-
-/* uart registration process */
-
-void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
deleted file mode 100644
index 08d782d65d7b..000000000000
--- a/arch/arm/mach-s5pc100/common.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S5PC100 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
-#define __ARCH_ARM_MACH_S5PC100_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5pc100_init_io(struct map_desc *mach_desc, int size);
-void s5pc100_init_irq(void);
-
-void s5pc100_register_clocks(void);
-void s5pc100_setup_clocks(void);
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd);
-
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
deleted file mode 100644
index 46f488b09391..000000000000
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5pc100_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0: /* Dedicated pins */
- break;
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- },
- },
-};
-
-static struct resource s5pc100_iis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
- [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device s5pc100_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
- .resource = s5pc100_iis0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
-};
-
-static struct resource s5pc100_iis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5pc100_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
- .resource = s5pc100_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource s5pc100_iis2_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5pc100_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
- .resource = s5pc100_iis2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
- break;
-
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5pc100_pcm_cfg_gpio,
-};
-
-static struct resource s5pc100_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5pc100_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource),
- .resource = s5pc100_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5pc100_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device s5pc100_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource),
- .resource = s5pc100_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pc100_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
- [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
- [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
- [4] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = s5pc100_ac97_cfg_gpio,
-};
-
-static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_ac97_resource),
- .resource = s5pc100_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s5pc100_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static struct resource s5pc100_spdif_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata s5p_spdif_pdata = {
- .cfg_gpio = s5pc100_spdif_cfg_gpd,
-};
-
-static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
- .resource = s5pc100_spdif_resource,
- .dev = {
- .platform_data = &s5p_spdif_pdata,
- .dma_mask = &s5pc100_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5pc100_spdif_setup_gpio(int gpio)
-{
- if (gpio == S5PC100_SPDIF_GPD)
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
- else
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
deleted file mode 100644
index b1418409709e..000000000000
--- a/arch/arm/mach-s5pc100/dma.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_EXTERNAL,
- DMACH_PWM,
- DMACH_SPDIF,
- DMACH_HSI_RX,
- DMACH_HSI_TX,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
- S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MSM_REQ0,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ2,
- DMACH_MSM_REQ3,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
- S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
-
-static int __init s5pc100_dma_init(void)
-{
- dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
-
- dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5pc100_dma_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
deleted file mode 100644
index 22c23859e45e..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * Based on mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
deleted file mode 100644
index 201842a3769e..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
deleted file mode 100644
index bad0700457db..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for the Samsung S5PC1XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
deleted file mode 100644
index 5e1a924b595f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO lib support
- *
- * Base on mach-s3c6400/include/mach/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-#define S5PC100_GPIO_A0_NR (8)
-#define S5PC100_GPIO_A1_NR (5)
-#define S5PC100_GPIO_B_NR (8)
-#define S5PC100_GPIO_C_NR (5)
-#define S5PC100_GPIO_D_NR (7)
-#define S5PC100_GPIO_E0_NR (8)
-#define S5PC100_GPIO_E1_NR (6)
-#define S5PC100_GPIO_F0_NR (8)
-#define S5PC100_GPIO_F1_NR (8)
-#define S5PC100_GPIO_F2_NR (8)
-#define S5PC100_GPIO_F3_NR (4)
-#define S5PC100_GPIO_G0_NR (8)
-#define S5PC100_GPIO_G1_NR (3)
-#define S5PC100_GPIO_G2_NR (7)
-#define S5PC100_GPIO_G3_NR (7)
-#define S5PC100_GPIO_H0_NR (8)
-#define S5PC100_GPIO_H1_NR (8)
-#define S5PC100_GPIO_H2_NR (8)
-#define S5PC100_GPIO_H3_NR (8)
-#define S5PC100_GPIO_I_NR (8)
-#define S5PC100_GPIO_J0_NR (8)
-#define S5PC100_GPIO_J1_NR (5)
-#define S5PC100_GPIO_J2_NR (8)
-#define S5PC100_GPIO_J3_NR (8)
-#define S5PC100_GPIO_J4_NR (4)
-#define S5PC100_GPIO_K0_NR (8)
-#define S5PC100_GPIO_K1_NR (6)
-#define S5PC100_GPIO_K2_NR (8)
-#define S5PC100_GPIO_K3_NR (8)
-#define S5PC100_GPIO_L0_NR (8)
-#define S5PC100_GPIO_L1_NR (8)
-#define S5PC100_GPIO_L2_NR (8)
-#define S5PC100_GPIO_L3_NR (8)
-#define S5PC100_GPIO_L4_NR (8)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PC100_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5PC100_GPIO_A0_START = 0,
- S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
- S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
- S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
- S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
- S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
- S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
- S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
- S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
- S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
- S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
- S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
- S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
- S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
- S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
- S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
- S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
- S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
- S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
- S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
- S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
- S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
- S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
- S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
- S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
- S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
- S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
- S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
- S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
- S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
- S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
- S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
- S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
- S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
- S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
-};
-
-/* S5PC100 GPIO number definitions. */
-#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
-#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
-#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
-#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
-#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
-#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
-#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
-#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
-#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
-#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
-#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
-#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
-#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
-#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
-#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
-#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
-#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
-#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
-#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
-#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
-#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
-#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
-#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
-#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
-#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
-#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
-#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
-#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
-#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
-#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
-#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
-#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
-#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
-#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
-
-/* It used the end of the S5PC100 gpios */
-#define S3C_GPIO_END S5PC100_GPIO_END
-
-/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
deleted file mode 100644
index 6b38618c2fd9..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
deleted file mode 100644
index d2eb4757381f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: system, DMA, timer */
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-
-/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFCON S5P_IRQ_VIC1(9)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_UART3 S5P_IRQ_VIC1(13)
-#define IRQ_IIC S5P_IRQ_VIC1(14)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_SPI1 S5P_IRQ_VIC1(16)
-#define IRQ_SPI2 S5P_IRQ_VIC1(17)
-#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX S5P_IRQ_VIC1(21)
-#define IRQ_HSITX S5P_IRQ_VIC1(22)
-#define IRQ_UHOST S5P_IRQ_VIC1(23)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
-
-/* VIC2: multimedia, audio, security */
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_2D S5P_IRQ_VIC2(9)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_MIXER S5P_IRQ_VIC2(11)
-#define IRQ_HDMI S5P_IRQ_VIC2(12)
-#define IRQ_IIC1 S5P_IRQ_VIC2(13)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_I2S2 S5P_IRQ_VIC2(18)
-#define IRQ_AC97 S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF S5P_IRQ_VIC2(22)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_CG S5P_IRQ_VIC2(26)
-#define IRQ_SEC S5P_IRQ_VIC2(27)
-#define IRQ_SECRX S5P_IRQ_VIC2(28)
-#define IRQ_SECTX S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
-#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR 21
-
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO IRQ_LCD0
-#define IRQ_LCD_VSYNC IRQ_LCD1
-#define IRQ_LCD_SYSTEM IRQ_LCD2
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
deleted file mode 100644
index 2550b6112b82..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/map.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PC100_PA_SDRAM 0x20000000
-
-#define S5PC100_PA_ONENAND 0xE7100000
-#define S5PC100_PA_ONENAND_BUF 0xB0000000
-
-#define S5PC100_PA_CHIPID 0xE0000000
-
-#define S5PC100_PA_SYSCON 0xE0100000
-
-#define S5PC100_PA_OTHERS 0xE0200000
-
-#define S5PC100_PA_GPIO 0xE0300000
-
-#define S5PC100_PA_VIC0 0xE4000000
-#define S5PC100_PA_VIC1 0xE4100000
-#define S5PC100_PA_VIC2 0xE4200000
-
-#define S5PC100_PA_SROMC 0xE7000000
-
-#define S5PC100_PA_CFCON 0xE7800000
-
-#define S5PC100_PA_MDMA 0xE8100000
-#define S5PC100_PA_PDMA0 0xE9000000
-#define S5PC100_PA_PDMA1 0xE9200000
-
-#define S5PC100_PA_TIMER 0xEA000000
-#define S5PC100_PA_SYSTIMER 0xEA100000
-#define S5PC100_PA_WATCHDOG 0xEA200000
-#define S5PC100_PA_RTC 0xEA300000
-
-#define S5PC100_PA_UART 0xEC000000
-
-#define S5PC100_PA_IIC0 0xEC100000
-#define S5PC100_PA_IIC1 0xEC200000
-
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
-
-#define S5PC100_PA_USB_HSOTG 0xED200000
-#define S5PC100_PA_USB_HSPHY 0xED300000
-
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5PC100_PA_FB 0xEE000000
-
-#define S5PC100_PA_FIMC0 0xEE200000
-#define S5PC100_PA_FIMC1 0xEE300000
-#define S5PC100_PA_FIMC2 0xEE400000
-
-#define S5PC100_PA_I2S0 0xF2000000
-#define S5PC100_PA_I2S1 0xF2100000
-#define S5PC100_PA_I2S2 0xF2200000
-
-#define S5PC100_PA_AC97 0xF2300000
-
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
-
-#define S5PC100_PA_SPDIF 0xF2600000
-
-#define S5PC100_PA_TSADC 0xF3000000
-
-#define S5PC100_PA_KEYPAD 0xF3100000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_SPI0 S5PC100_PA_SPI0
-#define S3C_PA_SPI1 S5PC100_PA_SPI1
-#define S3C_PA_SPI2 S5PC100_PA_SPI2
-
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
-#define S5P_PA_SROMC S5PC100_PA_SROMC
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
-#define S5P_PA_TIMER S5PC100_PA_TIMER
-
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER
-
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-
-#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-
-/* UART */
-
-#define S3C_PA_UART S5PC100_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
deleted file mode 100644
index bc92da2e0ba2..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
-#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
-
-#define S5P_APLL_CON S5P_CLKREG(0x100)
-#define S5P_MPLL_CON S5P_CLKREG(0x104)
-#define S5P_EPLL_CON S5P_CLKREG(0x108)
-#define S5P_HPLL_CON S5P_CLKREG(0x10C)
-
-#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
-
-#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
-
-#define S5P_CLK_OUT S5P_CLKREG(0x400)
-
-#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
-#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
-#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
-
-#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
-#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
-#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
-#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
-#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
-#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
-
-#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
-
-#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
-#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_D0_MASK (0x7<<8)
-#define S5P_CLKDIV0_D0_SHIFT (8)
-#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
-
-/* CLKDIV1 */
-#define S5P_CLKDIV1_D1_MASK (0x7<<12)
-#define S5P_CLKDIV1_D1_SHIFT (12)
-#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
-
-#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
-#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
deleted file mode 100644
index 0bf73209ec7b..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO register definitions
- */
-
-#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
-#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
-
-#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
-
-#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x) S5PC100_GPH0(x)
-#define EINT_GPIO_1(x) S5PC100_GPH1(x)
-#define EINT_GPIO_2(x) S5PC100_GPH2(x)
-#define EINT_GPIO_3(x) S5PC100_GPH3(x)
-
-#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
-
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
deleted file mode 100644
index 761627897f30..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
deleted file mode 100644
index 668af3ac31f3..000000000000
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Author: Byungho Min <bhmin@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/adc.h>
-#include <plat/keypad.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <plat/backlight.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_RXTRIG8 | \
- S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c_devs0[] __initdata = {
- {I2C_BOARD_INFO("wm8580", 0x1b),},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c_devs1[] __initdata = {
-};
-
-/* LCD power controller */
-static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- /* module reset */
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(100);
- gpio_direction_output(S5PC100_GPH0(6), 0);
- mdelay(10);
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(10);
- }
-}
-
-static struct plat_lcd_data smdkc100_lcd_power_data = {
- .set_power = smdkc100_lcd_power_set,
-};
-
-static struct platform_device smdkc100_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdkc100_lcd_power_data,
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdkc100_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkc100_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- .refresh = 80,
-};
-
-static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
- .win[0] = &smdkc100_fb_win0,
- .vtiming = &smdkc100_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
-};
-
-static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
- .setup_gpio = s5pc100_ide_setup_gpio,
-};
-
-static uint32_t smdkc100_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
- .keymap = smdkc100_keymap,
- .keymap_size = ARRAY_SIZE(smdkc100_keymap),
-};
-
-static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
- .keymap_data = &smdkc100_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct platform_device *smdkc100_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_cfcon,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &smdkc100_lcd_powerdev,
- &s5pc100_device_iis0,
- &samsung_device_keypad,
- &s5pc100_device_ac97,
- &s3c_device_rtc,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5pc100_device_spdif,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
- .no = S5PC100_GPD(0),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc100_bl_data = {
- .pwm_id = 0,
- .enable_gpio = -1,
-};
-
-static void __init smdkc100_map_io(void)
-{
- s5pc100_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdkc100_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- /* I2C */
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- s3c_fb_set_platdata(&smdkc100_lcd_pdata);
- s3c_ide_set_platdata(&smdkc100_ide_pdata);
-
- samsung_keypad_set_platdata(&smdkc100_keypad_data);
-
- s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
-
- /* LCD init */
- gpio_request(S5PC100_GPH0(6), "GPH0");
- smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
-
- platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
-
- samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-}
-
-MACHINE_START(SMDKC100, "SMDKC100")
- /* Maintainer: Byungho Min <bhmin@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pc100_init_irq,
- .map_io = smdkc100_map_io,
- .init_machine = smdkc100_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pc100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
deleted file mode 100644
index 8978e4cf9ed5..000000000000
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC100 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#define DISR_OFFSET 0x7008
-
-static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-}
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
- s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
deleted file mode 100644
index 89a6a769d622..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
deleted file mode 100644
index faa667ef02cb..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
deleted file mode 100644
index 223aae044466..000000000000
--- a/arch/arm/mach-s5pc100/setup-ide.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PC100 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
- for (; nr > 0; nr--, base++)
- s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pc100_ide_setup_gpio(void)
-{
- u32 reg;
-
- /* Independent CF interface, CF chip select configuration */
- reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
- writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
-
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
-
- /*CF_Data[0 - 7] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
-
- /* CF_Data[8 - 15] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
-
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
-
- /* EBI_OE, EBI_WE */
- s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
-
- /* CF_OE, CF_WE */
- s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
-
- /* CF_CD */
- s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
-}
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
deleted file mode 100644
index ada377f0c206..000000000000
--- a/arch/arm/mach-s5pc100/setup-keypad.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * GPIO configuration for S5PC100 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
deleted file mode 100644
index 6010c0310cb5..000000000000
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int num;
-
- num = width;
- /* In case of 8 width, we should decrease the 2 */
- if (width == 8)
- num = width - 2;
-
- /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-
- if (width == 8)
- s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG2 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG3 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
- }
-}
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
deleted file mode 100644
index 183567961de1..000000000000
--- a/arch/arm/mach-s5pc100/setup-spi.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-int s3c64xx_spi2_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index d2d375b3db2d..1c629c2c270f 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -15,7 +15,7 @@ config PLAT_SAMSUNG
config PLAT_S5P
bool
- depends on (ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S5PV210
default y
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
@@ -78,14 +78,14 @@ config SAMSUNG_CLKSRC
used by newer systems such as the S3C64XX.
config S5P_CLOCK
- def_bool (ARCH_S5PC100 || ARCH_S5PV210)
+ def_bool ARCH_S5PV210
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
# options for IRQ support
config S5P_IRQ
- def_bool (ARCH_S5PC100 || ARCH_S5PV210)
+ def_bool ARCH_S5PV210
help
Support common interrupt part for ARCH_S5P SoCs
@@ -142,7 +142,7 @@ config S3C_GPIO_TRACK
config S5P_DEV_UART
def_bool y
- depends on (ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S5PV210
# ADC driver
@@ -396,7 +396,7 @@ config SAMSUNG_PM_GPIO
config SAMSUNG_DMADEV
bool "Use legacy Samsung DMA abstraction"
- depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S3C64XX
+ depends on CPU_S5PV210 || ARCH_S3C64XX
select DMADEVICES
default y
help
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 8033561f6200..468352633101 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -43,7 +43,7 @@ enum s3c_cpu_type {
TYPE_ADCV1, /* S3C24XX */
TYPE_ADCV11, /* S3C2443 */
TYPE_ADCV12, /* S3C2416, S3C2450 */
- TYPE_ADCV2, /* S3C64XX, S5PC100 */
+ TYPE_ADCV2, /* S3C64XX */
TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 18e4365b0d26..d1d4659025bb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -33,9 +33,6 @@ extern unsigned long samsung_cpu_id;
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
-#define S5PC100_CPU_ID 0x43100000
-#define S5PC100_CPU_MASK 0xFFFFF000
-
#define S5PV210_CPU_ID 0x43110000
#define S5PV210_CPU_MASK 0xFFFFF000
@@ -50,7 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
@@ -80,12 +76,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
# define soc_is_s3c64xx() 0
#endif
-#if defined(CONFIG_CPU_S5PC100)
-# define soc_is_s5pc100() is_samsung_s5pc100()
-#else
-# define soc_is_s5pc100() 0
-#endif
-
#if defined(CONFIG_CPU_S5PV210)
# define soc_is_s5pv210() is_samsung_s5pv210()
#else
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index ca66f5137f4b..5f5a28d08c2e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -94,14 +94,6 @@ extern struct platform_device s5p_device_mixer;
extern struct platform_device s5p_device_onenand;
extern struct platform_device s5p_device_sdo;
-extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_iis0;
-extern struct platform_device s5pc100_device_iis1;
-extern struct platform_device s5pc100_device_iis2;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
-extern struct platform_device s5pc100_device_spdif;
-
extern struct platform_device s5pv210_device_ac97;
extern struct platform_device s5pv210_device_iis0;
extern struct platform_device s5pv210_device_iis1;
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index a400464c7a6d..5a0e26afb961 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -41,13 +41,6 @@ extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
extern void s3c64xx_fb_gpio_setup_24bpp(void);
/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
-/**
* s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
*
* Initialise the GPIO for an 24bpp LCD display on the RGB interface.
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 8364b4bea8b8..acacc4b88a39 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -57,7 +57,7 @@ extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
extern int s5p_epll_enable(struct clk *clk, int enable);
extern unsigned long s5p_epll_get_rate(struct clk *clk);
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+/* SPDIF clk operations common for S5PV210/C110 and Exynos4 */
extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
extern unsigned long s5p_spdif_get_rate(struct clk *clk);
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 7b2332fc7ac6..f84b6cbc8745 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -56,9 +56,6 @@ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
@@ -147,37 +144,6 @@ static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-static inline void s5pc100_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
/* S5PV210 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index bbb746e35500..e7028681aa70 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -23,7 +23,6 @@ config ARM_VIC
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
- default 3 if ARCH_S5PC100
default 2
depends on ARM_VIC
help