summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-vf6109
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt23
-rw-r--r--Documentation/devicetree/bindings/display/fsl,dcu.txt6
-rw-r--r--Documentation/devicetree/bindings/display/fsl,tcon.txt18
-rw-r--r--Documentation/devicetree/bindings/display/panel/logic,lt161010-2nhc.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt8
-rw-r--r--Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt8
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/vf610-dac.txt20
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.txt2
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/fusion_F0710A.txt23
-rw-r--r--Documentation/security/keys.txt22
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/boot/dts/Makefile4
-rw-r--r--arch/arm/boot/dts/vf-colibri-aster.dtsi199
-rw-r--r--arch/arm/boot/dts/vf-colibri-dual-eth.dtsi93
-rw-r--r--arch/arm/boot/dts/vf-colibri-eval-v3.dtsi157
-rw-r--r--arch/arm/boot/dts/vf-colibri.dtsi201
-rw-r--r--arch/arm/boot/dts/vf500-colibri-aster.dts22
-rw-r--r--arch/arm/boot/dts/vf500-colibri-dual-eth.dts17
-rw-r--r--arch/arm/boot/dts/vf500-colibri.dtsi5
-rw-r--r--arch/arm/boot/dts/vf500.dtsi10
-rw-r--r--arch/arm/boot/dts/vf610-colibri-aster.dts17
-rw-r--r--arch/arm/boot/dts/vf610-colibri-dual-eth.dts17
-rw-r--r--arch/arm/boot/dts/vf610-colibri.dtsi111
-rw-r--r--arch/arm/boot/dts/vf610-twr.dts4
-rw-r--r--arch/arm/boot/dts/vf610.dtsi27
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi254
-rw-r--r--arch/arm/configs/colibri_vf_defconfig337
-rw-r--r--arch/arm/kernel/irq.c2
-rw-r--r--arch/arm/mach-imx/Makefile3
-rw-r--r--arch/arm/mach-imx/common.h10
-rw-r--r--arch/arm/mach-imx/mach-vf610.c8
-rw-r--r--arch/arm/mach-imx/pm-vf610.c704
-rw-r--r--arch/arm/mach-imx/suspend-vf610.S448
-rw-r--r--arch/x86/kernel/kexec-bzimage64.c18
-rw-r--r--certs/Kconfig16
-rw-r--r--certs/system_certificates.S13
-rw-r--r--certs/system_keyring.c55
-rw-r--r--crypto/asymmetric_keys/Kconfig4
-rw-r--r--crypto/asymmetric_keys/mscode_parser.c21
-rw-r--r--crypto/asymmetric_keys/pkcs7_key_type.c72
-rw-r--r--crypto/asymmetric_keys/pkcs7_parser.c21
-rw-r--r--crypto/asymmetric_keys/verify_pefile.c40
-rw-r--r--crypto/asymmetric_keys/verify_pefile.h5
-rw-r--r--crypto/asymmetric_keys/x509_public_key.c2
-rw-r--r--drivers/char/Kconfig6
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/vf610_sema4.c306
-rw-r--r--drivers/clk/imx/clk-gate2.c7
-rw-r--r--drivers/clk/imx/clk-vf610.c99
-rw-r--r--drivers/clk/imx/clk.h13
-rw-r--r--drivers/clocksource/vf_pit_timer.c30
-rw-r--r--drivers/dma/fsl-edma.c85
-rw-r--r--drivers/gpio/gpio-vf610.c188
-rw-r--r--drivers/gpu/drm/drm_atomic.c7
-rw-r--r--drivers/gpu/drm/drm_atomic_helper.c162
-rw-r--r--drivers/gpu/drm/drm_crtc_helper.c6
-rw-r--r--drivers/gpu/drm/drm_fb_cma_helper.c15
-rw-r--r--drivers/gpu/drm/drm_modeset_lock.c89
-rw-r--r--drivers/gpu/drm/fsl-dcu/Makefile3
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c248
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h13
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c217
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h32
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c20
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c67
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c198
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h4
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c6
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_tcon.c108
-rw-r--r--drivers/gpu/drm/fsl-dcu/fsl_tcon.h33
-rw-r--r--drivers/gpu/drm/imx/imx-drm-core.c1
-rw-r--r--drivers/gpu/drm/panel/panel-simple.c83
-rw-r--r--drivers/gpu/drm/sti/sti_drv.c1
-rw-r--r--drivers/gpu/drm/tilcdc/tilcdc_drv.c1
-rw-r--r--drivers/i2c/busses/i2c-imx.c42
-rw-r--r--drivers/iio/dac/Kconfig10
-rw-r--r--drivers/iio/dac/Makefile1
-rw-r--r--drivers/iio/dac/vf610_dac.c298
-rw-r--r--drivers/input/touchscreen/Kconfig15
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c662
-rw-r--r--drivers/input/touchscreen/colibri-vf50-ts.c8
-rw-r--r--drivers/input/touchscreen/fusion_F0710A.c507
-rw-r--r--drivers/input/touchscreen/fusion_F0710A.h87
-rw-r--r--drivers/input/touchscreen/ili210x.c2
-rw-r--r--drivers/input/touchscreen/pixcir_i2c_ts.c4
-rw-r--r--drivers/input/touchscreen/rohm_bu21023.c3
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c2
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-vf610-gpc.c138
-rw-r--r--drivers/irqchip/irq-vf610-mscm-ir.c126
-rw-r--r--drivers/mfd/syscon.c30
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c6
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c36
-rw-r--r--drivers/mmc/host/sdhci-pltfm.h2
-rw-r--r--drivers/net/ethernet/freescale/Kconfig9
-rw-r--r--drivers/net/ethernet/freescale/Makefile1
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c15
-rw-r--r--drivers/net/ethernet/freescale/fsl_l2_switch.c912
-rw-r--r--drivers/net/ethernet/freescale/fsl_l2_switch.h776
-rw-r--r--drivers/net/phy/micrel.c2
-rw-r--r--drivers/pinctrl/freescale/pinctrl-imx.c93
-rw-r--r--drivers/pinctrl/freescale/pinctrl-imx.h3
-rw-r--r--drivers/pinctrl/freescale/pinctrl-vf610.c6
-rw-r--r--drivers/remoteproc/Kconfig9
-rw-r--r--drivers/remoteproc/Makefile1
-rw-r--r--drivers/remoteproc/remoteproc_core.c48
-rw-r--r--drivers/remoteproc/vf610_cm4_rproc.c259
-rw-r--r--drivers/rpmsg/Kconfig12
-rw-r--r--drivers/rpmsg/Makefile3
-rw-r--r--drivers/rpmsg/imx_rpmsg_pingpong.c110
-rw-r--r--drivers/rpmsg/imx_rpmsg_tty.c233
-rw-r--r--drivers/rpmsg/vf610_rpmsg.c353
-rw-r--r--drivers/rtc/rtc-ds1307.c12
-rw-r--r--drivers/soc/Kconfig1
-rw-r--r--drivers/soc/Makefile1
-rw-r--r--drivers/soc/fsl/Kconfig10
-rw-r--r--drivers/soc/fsl/Makefile1
-rw-r--r--drivers/soc/fsl/soc-vf610.c167
-rw-r--r--drivers/spi/spi-fsl-dspi.c307
-rw-r--r--drivers/spi/spidev.c1
-rw-r--r--drivers/tty/serial/fsl_lpuart.c973
-rw-r--r--drivers/usb/chipidea/ci.h2
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.c17
-rw-r--r--drivers/usb/chipidea/core.c125
-rw-r--r--drivers/usb/chipidea/otg.c8
-rw-r--r--drivers/usb/gadget/configfs.c14
-rw-r--r--drivers/video/logo/Kconfig4
-rw-r--r--drivers/video/logo/Makefile2
-rw-r--r--drivers/video/logo/logo.c4
-rw-r--r--fs/cifs/cifsacl.c2
-rw-r--r--fs/nfs/nfs4idmap.c2
-rw-r--r--fs/ubifs/Kconfig24
-rw-r--r--fs/ubifs/Makefile3
-rw-r--r--fs/ubifs/dir.c17
-rw-r--r--fs/ubifs/file.c4
-rw-r--r--fs/ubifs/journal.c78
-rw-r--r--fs/ubifs/misc.h8
-rw-r--r--fs/ubifs/orphan.c208
-rw-r--r--fs/ubifs/super.c2
-rw-r--r--fs/ubifs/ubifs.h19
-rw-r--r--fs/ubifs/xattr.c73
-rw-r--r--include/crypto/pkcs7.h3
-rw-r--r--include/crypto/public_key.h14
-rw-r--r--include/drm/drm_atomic_helper.h6
-rw-r--r--include/drm/drm_crtc.h9
-rw-r--r--include/drm/drm_fb_cma_helper.h1
-rw-r--r--include/drm/drm_modeset_lock.h4
-rw-r--r--include/dt-bindings/clock/vf610-clock.h7
-rw-r--r--include/keys/asymmetric-type.h1
-rw-r--r--include/keys/system_keyring.h29
-rw-r--r--include/linux/input/fusion_F0710A.h20
-rw-r--r--include/linux/key.h53
-rw-r--r--include/linux/linux_logo.h1
-rw-r--r--include/linux/mfd/syscon.h10
-rw-r--r--include/linux/usb/chipidea.h4
-rw-r--r--include/linux/verification.h50
-rw-r--r--include/linux/verify_pefile.h22
-rw-r--r--include/linux/vf610_mscm.h13
-rw-r--r--include/linux/vf610_sema4.h83
-rw-r--r--kernel/module_signing.c5
-rw-r--r--net/dns_resolver/dns_key.c2
-rw-r--r--net/rxrpc/ar-key.c4
-rw-r--r--net/wireless/Kconfig4
-rw-r--r--scripts/.gitignore1
-rw-r--r--scripts/Makefile1
-rw-r--r--scripts/insert-sys-cert.c410
-rw-r--r--security/integrity/Kconfig11
-rw-r--r--security/integrity/digsig.c21
-rw-r--r--security/integrity/digsig_asymmetric.c14
-rw-r--r--security/integrity/evm/evm_main.c8
-rw-r--r--security/integrity/ima/Kconfig44
-rw-r--r--security/integrity/ima/Makefile1
-rw-r--r--security/integrity/ima/ima.h23
-rw-r--r--security/integrity/ima/ima_fs.c42
-rw-r--r--security/integrity/ima/ima_init.c2
-rw-r--r--security/integrity/ima/ima_mok.c56
-rw-r--r--security/integrity/ima/ima_policy.c286
-rw-r--r--security/integrity/integrity.h5
-rw-r--r--security/keys/key.c45
-rw-r--r--security/keys/keyring.c73
-rw-r--r--security/keys/persistent.c4
-rw-r--r--security/keys/process_keys.c14
-rw-r--r--security/keys/request_key.c4
-rw-r--r--security/keys/request_key_auth.c2
-rw-r--r--sound/soc/codecs/wm9712.c4
-rw-r--r--sound/soc/fsl/Kconfig9
-rw-r--r--sound/soc/fsl/Makefile3
-rw-r--r--sound/soc/fsl/fsl_sai.h6
-rw-r--r--sound/soc/fsl/fsl_sai_ac97.c1353
-rw-r--r--sound/soc/fsl/fsl_sai_clk.c260
-rw-r--r--sound/soc/fsl/fsl_sai_wm9712.c130
194 files changed, 13900 insertions, 1307 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610
index ecbc1f4af921..308a6756d3bf 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -5,3 +5,12 @@ Description:
Specifies the hardware conversion mode used. The three
available modes are "normal", "high-speed" and "low-power",
where the last is the default mode.
+
+
+What: /sys/bus/iio/devices/iio:deviceX/out_conversion_mode
+KernelVersion: 4.6
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the hardware conversion mode used within DAC.
+ The two available modes are "high-power" and "low-power",
+ where "low-power" mode is the default mode.
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt
new file mode 100644
index 000000000000..56a71d6bb423
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt
@@ -0,0 +1,23 @@
+Freescale Vybrid LPDDR2/DDR3 SDRAM Memory Controller
+
+The memory controller supports high performance applications for 16-bit or
+8-bit DDR2, or LPDDR SDRAM memories.
+
+Required properties:
+- compatible: "fsl,vf610-ddrmc"
+- reg: the register range of the DDRMC registers
+- clocks: DDRMC main clock to clock memory and access registers.
+- clock-names: Must contain "ddrc", matching entry in the clocks property.
+- fsl,has-cke-reset-pulls:
+ States whether pull-down/up are populated on DDR CKE/RESET
+ signals to allow using DDR self-refresh modes (see Vybrid
+ Hardware Development Guide for details).
+
+Example:
+ ddrmc: ddrmc@400ae000 {
+ compatible = "fsl,vf610-ddrmc";
+ reg = <0x400ae000 0x1000>;
+ clocks = <&clks VF610_CLK_DDRMC>;
+ clock-names = "ddrc";
+ fsl,has-cke-reset-pulls;
+ }
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
index ebf1be9ae393..62c167e3da21 100644
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -11,6 +11,11 @@ Required properties:
- big-endian Boolean property, LS1021A DCU registers are big-endian.
- fsl,panel: The phandle to panel node.
+Optional properties:
+- fsl,tcon: The phandle to the timing controller node.
+- clocks: Second handle for pixel clock.
+- clock-names: Second name "pix" for pixel clock.
+
Examples:
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
@@ -19,4 +24,5 @@ dcu: dcu@2ce0000 {
clock-names = "dcu";
big-endian;
fsl,panel = <&panel>;
+ fsl,tcon = <&tcon>;
};
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
new file mode 100644
index 000000000000..2e1015e81fac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -0,0 +1,18 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,vf610-tcon".
+
+- reg: Address and length of the register set for dcu.
+- clocks: From common clock binding: handle to tcon ipg clock.
+- clock-names: From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/display/panel/logic,lt161010-2nhc.txt b/Documentation/devicetree/bindings/display/panel/logic,lt161010-2nhc.txt
new file mode 100644
index 000000000000..09fa2aa94b73
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/logic,lt161010-2nhc.txt
@@ -0,0 +1,7 @@
+Logic Technologies LT161010-2NHC TFT 7" WVGA 800x480 panel.
+
+Required properties:
+- compatible: should be "logic,lt161010-2nhc"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
new file mode 100644
index 000000000000..a2613b9675df
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with,
+800 x 480 (WVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f07a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
new file mode 100644
index 000000000000..b9d051196ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with,
+1024 x 600 (WSVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f10a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index c50cf13c852e..aee63eb6a3b6 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -92,6 +92,7 @@ sgx,vz89x SGX Sensortech VZ89X Sensors
sii,s35390a 2-wire CMOS real-time clock
skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
st-micro,24c256 i2c serial eeprom (24cxx)
+st,m41t0 Serial real-time clock (RTC)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
diff --git a/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
new file mode 100644
index 000000000000..20c6c7ae9687
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
@@ -0,0 +1,20 @@
+Freescale vf610 Digital to Analog Converter bindings
+
+The devicetree bindings are for the new DAC driver written for
+vf610 SoCs from Freescale.
+
+Required properties:
+- compatible: Should contain "fsl,vf610-dac"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain the interrupt for the device
+- clocks: The clock is needed by the DAC controller
+- clock-names: Must contain "dac" matching entry in the clocks property.
+
+Example:
+dac0: dac@400cc000 {
+ compatible = "fsl,vf610-dac";
+ reg = <0x400cc000 0x1000>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dac";
+ clocks = <&clks VF610_CLK_DAC0>;
+};
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index 1852906517ab..23e3abc3fdef 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -22,6 +22,8 @@ Optional properties for main touchpad device:
experiment to determine which bit corresponds to which input. Use
KEY_RESERVED for unused padding values.
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
Example:
touch@4b {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fusion_F0710A.txt b/Documentation/devicetree/bindings/input/touchscreen/fusion_F0710A.txt
new file mode 100644
index 000000000000..6fe730d03e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/fusion_F0710A.txt
@@ -0,0 +1,23 @@
+* TouchRevolution Fusion 7" and 10" multi-touch controller
+
+Required properties:
+- compatible: must be "touchrevolution,fusion-f0710a"
+- reg: I2C address of the chip
+- gpios: The interrupt and reset GPIO's.(see GPIO binding[1] for more details)
+
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+ &i2c1 {
+ status = "okay";
+
+ pcap@10 {
+ compatible = "touchrevolution,fusion-f0710a";
+ reg = <0x10>;
+ gpios = <&gpio6 10 0
+ &gpio6 9 0
+ >;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 8c183873b2b7..a6a50b359025 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -999,6 +999,10 @@ payload contents" for more information.
struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
const struct cred *cred,
key_perm_t perm,
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *),
unsigned long flags,
struct key *dest);
@@ -1010,6 +1014,24 @@ payload contents" for more information.
KEY_ALLOC_NOT_IN_QUOTA in flags if the keyring shouldn't be accounted
towards the user's quota). Error ENOMEM can also be returned.
+ If restrict_link not NULL, it should point to a function that will be
+ called each time an attempt is made to link a key into the new keyring.
+ This function is called to check whether a key may be added into the keying
+ or not. Callers of key_create_or_update() within the kernel can pass
+ KEY_ALLOC_BYPASS_RESTRICTION to suppress the check. An example of using
+ this is to manage rings of cryptographic keys that are set up when the
+ kernel boots where userspace is also permitted to add keys - provided they
+ can be verified by a key the kernel already has.
+
+ When called, the restriction function will be passed the keyring being
+ added to, the key flags value and the type and payload of the key being
+ added. Note that when a new key is being created, this is called between
+ payload preparsing and actual key creation. The function should return 0
+ to allow the link or an error to reject it.
+
+ A convenience function, restrict_link_reject, exists to always return
+ -EPERM to in this case.
+
(*) To check the validity of a key, this function can be called:
diff --git a/MAINTAINERS b/MAINTAINERS
index e1a15f7507fa..09742b6bdbe7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3681,7 +3681,7 @@ F: include/drm/exynos*
F: include/uapi/drm/exynos*
DRM DRIVERS FOR FREESCALE DCU
-M: Jianwei Wang <jianwei.wang.chn@gmail.com>
+M: Stefan Agner <stefan@agner.ch>
M: Alison Wang <alison.wang@freescale.com>
L: dri-devel@lists.freedesktop.org
S: Supported
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 25b80021a1a3..fafb6f91c23a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -358,7 +358,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
+ vf500-colibri-aster.dtb \
+ vf610-colibri-aster.dtb \
vf610m4-colibri.dtb \
+ vf500-colibri-dual-eth.dtb \
+ vf610-colibri-dual-eth.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
diff --git a/arch/arm/boot/dts/vf-colibri-aster.dtsi b/arch/arm/boot/dts/vf-colibri-aster.dtsi
new file mode 100644
index 000000000000..0e93826d5fd8
--- /dev/null
+++ b/arch/arm/boot/dts/vf-colibri-aster.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2018 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec0;
+ };
+
+ panel: panel {
+ compatible = "edt,et057090dhu";
+ backlight = <&bl>;
+ power-supply = <&reg_3v3>;
+ };
+
+ extcon_usbc_det: usbc_det {
+ compatible = "linux,extcon-usb-gpio";
+ debounce = <25>;
+ id-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbc_det>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+ vin-supply = <&reg_5v0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ power {
+ label = "Wake-Up";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&bl {
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&dcu0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dcu0_1>;
+ fsl,panel = <&panel>;
+ status = "okay";
+};
+
+&dspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_aster_dspi1 &pinctrl_aster_spi_gpio>;
+ status = "okay";
+
+ spidev0: spidev@0 {
+ compatible = "toradex,evalspi";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Atmel maxtouch controller */
+ atmel_mxt_ts: atmel_mxt_ts@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: m41t0m6@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&reg_module_3v3 {
+ vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbdev0 {
+ extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usbh_vbus>;
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_gpiokeys: gpiokeys {
+ fsl,pins = <
+ VF610_PAD_PTB19__GPIO_41 0x218d
+ >;
+ };
+
+ pinctrl_aster_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD6__DSPI1_SIN 0x33e1
+ VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
+ VF610_PAD_PTD8__DSPI1_SCK 0x33e2
+ >;
+ };
+
+ pinctrl_aster_spi_gpio: spigpios {
+ fsl,pins = <
+ /* CS0 */
+ VF610_PAD_PTD5__GPIO_84 0x22ed
+ /* CS1 */
+ VF610_PAD_PTB18__GPIO_40 0x22ed
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf-colibri-dual-eth.dtsi b/arch/arm/boot/dts/vf-colibri-dual-eth.dtsi
new file mode 100644
index 000000000000..dfa19d6fb2ab
--- /dev/null
+++ b/arch/arm/boot/dts/vf-colibri-dual-eth.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+ chosen {
+ bootargs = "console=ttyLP0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = &fec0;
+ ethernet1 = &fec1;
+ };
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog_1>;
+
+ vf610-colibri {
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA9__RMII_CLKOUT 0x30d2
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ /* Disable pads multiplexed with PTC7/PTC6 */
+ VF610_PAD_PTB0__GPIO_22 0x0000
+ VF610_PAD_PTB9__GPIO_31 0x0000
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ VF610_PAD_PTA28__UART4_TX 0x21a2
+ VF610_PAD_PTA29__UART4_RX 0x21a1
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index ed65e0f7dfc0..356ad251e2ed 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright 2014 Toradex AG
+ * Copyright 2018 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -7,42 +7,76 @@
* (at your option) any later version.
*/
+#include <dt-bindings/input/input.h>
+
/ {
chosen {
stdout-path = "serial0:115200n8";
};
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec0;
+ };
+
clk16m: clk16m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <16000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ panel: panel {
+ compatible = "edt,et057090dhu";
+ backlight = <&bl>;
+ power-supply = <&reg_3v3>;
+ };
+
+ extcon_usbc_det: usbc_det {
+ compatible = "linux,extcon-usb-gpio";
+ debounce = <25>;
+ id-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbc_det>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+ vin-supply = <&reg_5v0>;
+ };
- /* USBH_PEN */
- usbh_vbus_reg: regulator@1 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1_reg>;
- reg = <1>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
- vin-supply = <&sys_5v0_reg>;
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ power {
+ label = "Wake-Up";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
};
};
};
@@ -50,21 +84,37 @@
&bl {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+ power-supply = <&reg_3v3>;
status = "okay";
};
+&dcu0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dcu0_1>;
+ fsl,panel = <&panel>;
+ status = "okay";
+};
+
+/* Colibri SPI */
&dspi1 {
status = "okay";
mcp2515can: can@0 {
compatible = "microchip,mcp2515";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can_int>;
reg = <0>;
clocks = <&clk16m>;
- spi-max-frequency = <10000000>;
+ /* pinctrl is set in iomuxc from hoggrp-0 */
interrupt-parent = <&gpio1>;
interrupts = <11 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ status = "okay";
+ };
+
+ spidev0: spidev@0 {
+ compatible = "toradex,evalspi";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ status = "disabled";
};
};
@@ -85,9 +135,33 @@
&i2c0 {
status = "okay";
+ /* Atmel maxtouch controller */
+ atmel_mxt_ts: atmel_mxt_ts@4a {
+ compatible = "atmel,maxtouch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiotouch>;
+ reg = <0x4a>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ /* TouchRevolution Fusion 7 and 10 multi-touch controller */
+ touch: touchrevf0710a@10 {
+ compatible = "touchrevolution,fusion-f0710a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiotouch>;
+ reg = <0x10>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH /* SO-DIMM 28, Pen down interrupt */
+ &gpio0 23 GPIO_ACTIVE_LOW /* SO-DIMM 30, Reset interrupt */
+ >;
+ status = "disabled";
+ };
+
/* M41T0M6 real time clock on carrier board */
rtc: m41t0m6@68 {
- compatible = "st,m41t00";
+ compatible = "st,m41t0";
reg = <0x68>;
};
};
@@ -100,6 +174,14 @@
status = "okay";
};
+&reg_module_3v3 {
+ vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
@@ -112,15 +194,26 @@
status = "okay";
};
+&usbdev0 {
+ extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
+};
+
&usbh1 {
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <&reg_usbh_vbus>;
};
&iomuxc {
vf610-colibri {
- pinctrl_can_int: can_int {
+ pinctrl_gpiokeys: gpiokeys {
+ fsl,pins = <
+ VF610_PAD_PTB19__GPIO_41 0x218d
+ >;
+ };
+
+ pinctrl_gpiotouch: touchgpios {
fsl,pins = <
- VF610_PAD_PTB21__GPIO_43 0x22ed
+ VF610_PAD_PTB8__GPIO_30 0x6d
+ VF610_PAD_PTB1__GPIO_23 0x4d
>;
};
};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b934945..cca8f38facb7 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -10,17 +10,61 @@
/ {
bl: backlight {
compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm0 0 5000000 0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3_avdd: regulator-module-3v3-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_AUDIO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ soc {
+ fsl,use-lpm-poweroff;
+ };
};
&adc0 {
status = "okay";
+ vref-supply = <&reg_module_3v3_avdd>;
};
&adc1 {
status = "okay";
+ vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan0>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&clks {
+ assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+ <&clks VF610_CLK_ENET_TS_SEL>;
+ assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+ <&clks VF610_CLK_ENET_50M>;
};
&dspi1 {
@@ -33,17 +77,34 @@
status = "okay";
};
+&edma1 {
+ status = "okay";
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ disable-wp;
};
&fec1 {
phy-mode = "rmii";
+ phy-handle = <&ethphy>;
+ phy-supply = <&reg_module_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ reg = <0>;
+ micrel,led-mode = <0>;
+ };
+ };
};
&i2c0 {
@@ -53,8 +114,6 @@
};
&nfc {
- assigned-clocks = <&clks VF610_CLK_NFC>;
- assigned-clock-rates = <33000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
@@ -74,12 +133,12 @@
&pwm0 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0>;
+ pinctrl-0 = <&pinctrl_pwm0_a &pinctrl_pwm0_c>;
};
&pwm1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-0 = <&pinctrl_pwm1_b &pinctrl_pwm1_d>;
};
&uart0 {
@@ -99,6 +158,7 @@
&usbdev0 {
disable-over-current;
+ dr_mode = "otg";
status = "okay";
};
@@ -124,12 +184,54 @@
};
&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_0 &pinctrl_hog_1>;
+
vf610-colibri {
- pinctrl_gpio_ext: gpio_ext {
+ pinctrl_flexcan0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x31F1
+ VF610_PAD_PTB15__CAN0_TX 0x31F2
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x31F1
+ VF610_PAD_PTB17__CAN1_TX 0x31F2
+ >;
+ };
+
+ pinctrl_dcu0_1: dcu0grp_1 {
fsl,pins = <
- VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
- VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
- VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
+ VF610_PAD_PTE0__DCU0_HSYNC 0x1902
+ VF610_PAD_PTE1__DCU0_VSYNC 0x1902
+ VF610_PAD_PTE2__DCU0_PCLK 0x1902
+ VF610_PAD_PTE4__DCU0_DE 0x1902
+ VF610_PAD_PTE5__DCU0_R0 0x1902
+ VF610_PAD_PTE6__DCU0_R1 0x1902
+ VF610_PAD_PTE7__DCU0_R2 0x1902
+ VF610_PAD_PTE8__DCU0_R3 0x1902
+ VF610_PAD_PTE9__DCU0_R4 0x1902
+ VF610_PAD_PTE10__DCU0_R5 0x1902
+ VF610_PAD_PTE11__DCU0_R6 0x1902
+ VF610_PAD_PTE12__DCU0_R7 0x1902
+ VF610_PAD_PTE13__DCU0_G0 0x1902
+ VF610_PAD_PTE14__DCU0_G1 0x1902
+ VF610_PAD_PTE15__DCU0_G2 0x1902
+ VF610_PAD_PTE16__DCU0_G3 0x1902
+ VF610_PAD_PTE17__DCU0_G4 0x1902
+ VF610_PAD_PTE18__DCU0_G5 0x1902
+ VF610_PAD_PTE19__DCU0_G6 0x1902
+ VF610_PAD_PTE20__DCU0_G7 0x1902
+ VF610_PAD_PTE21__DCU0_B0 0x1902
+ VF610_PAD_PTE22__DCU0_B1 0x1902
+ VF610_PAD_PTE23__DCU0_B2 0x1902
+ VF610_PAD_PTE24__DCU0_B3 0x1902
+ VF610_PAD_PTE25__DCU0_B4 0x1902
+ VF610_PAD_PTE26__DCU0_B5 0x1902
+ VF610_PAD_PTE27__DCU0_B6 0x1902
+ VF610_PAD_PTE28__DCU0_B7 0x1902
>;
};
@@ -169,6 +271,67 @@
>;
};
+ pinctrl_gpio_bl_on: gpio_bl_on {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
+ pinctrl_hog_0: hoggrp-0 {
+ fsl,pins = <
+ VF610_PAD_PTA12__GPIO_5 0x22ed
+ VF610_PAD_PTA17__GPIO_7 0x22ed
+ VF610_PAD_PTA20__GPIO_10 0x22ed
+ VF610_PAD_PTA21__GPIO_11 0x22ed
+ VF610_PAD_PTA30__GPIO_20 0x22ed
+ VF610_PAD_PTA31__GPIO_21 0x22ed
+ VF610_PAD_PTB6__GPIO_28 0x22ed
+ VF610_PAD_PTB7__GPIO_29 0x22ed
+ VF610_PAD_PTB16__GPIO_38 0x22ed
+ VF610_PAD_PTB17__GPIO_39 0x22ed
+ VF610_PAD_PTB18__GPIO_40 0x22ed
+ VF610_PAD_PTB21__GPIO_43 0x22ed
+ VF610_PAD_PTB22__GPIO_44 0x22ed
+ VF610_PAD_PTC1__GPIO_46 0x22ed
+ VF610_PAD_PTC2__GPIO_47 0x22ed
+ VF610_PAD_PTC3__GPIO_48 0x22ed
+ VF610_PAD_PTC4__GPIO_49 0x22ed
+ VF610_PAD_PTC5__GPIO_50 0x22ed
+ VF610_PAD_PTC6__GPIO_51 0x22ed
+ VF610_PAD_PTC7__GPIO_52 0x22ed
+ VF610_PAD_PTC8__GPIO_53 0x22ed
+ VF610_PAD_PTD30__GPIO_64 0x22ed
+ VF610_PAD_PTD29__GPIO_65 0x22ed
+ VF610_PAD_PTD28__GPIO_66 0x22ed
+ VF610_PAD_PTD26__GPIO_68 0x22ed
+ VF610_PAD_PTD25__GPIO_69 0x22ed
+ VF610_PAD_PTD24__GPIO_70 0x22ed
+ VF610_PAD_PTD9__GPIO_88 0x22ed
+ VF610_PAD_PTD10__GPIO_89 0x22ed
+ VF610_PAD_PTD11__GPIO_90 0x22ed
+ VF610_PAD_PTD12__GPIO_91 0x22ed
+ VF610_PAD_PTD13__GPIO_92 0x22ed
+ VF610_PAD_PTB26__GPIO_96 0x22ed
+ VF610_PAD_PTB28__GPIO_98 0x22ed
+ VF610_PAD_PTC30__GPIO_103 0x22ed
+ VF610_PAD_PTA7__GPIO_134 0x22ed
+ >;
+ };
+
+ pinctrl_hog_1: hoggrp-1 { /* ATMEL MXT TOUCH */
+ fsl,pins = <
+ VF610_PAD_PTD27__GPIO_67 0x22ed
+ VF610_PAD_PTD31__GPIO_63 0x22ed
+ >;
+ };
+
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ VF610_PAD_PTB12__GPIO_34 0x22ed
+ VF610_PAD_PTB13__GPIO_35 0x22ed
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
@@ -195,16 +358,26 @@
>;
};
- pinctrl_pwm0: pwm0grp {
+ pinctrl_pwm0_a: pwm0agrp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
+ >;
+ };
+
+ pinctrl_pwm0_c: pwm0cgrp {
+ fsl,pins = <
VF610_PAD_PTB1__FTM0_CH1 0x1182
>;
};
- pinctrl_pwm1: pwm1grp {
+ pinctrl_pwm1_b: pwm1bgrp {
fsl,pins = <
VF610_PAD_PTB8__FTM1_CH0 0x1182
+ >;
+ };
+
+ pinctrl_pwm1_d: pwm1dgrp {
+ fsl,pins = <
VF610_PAD_PTB9__FTM1_CH1 0x1182
>;
};
@@ -213,6 +386,8 @@
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
+ VF610_PAD_PTB12__UART0_RTS 0x21a2
+ VF610_PAD_PTB13__UART0_CTS 0x21a1
>;
};
@@ -232,6 +407,12 @@
>;
};
+ pinctrl_usbc_det: gpio_usbc_det {
+ fsl,pins = <
+ VF610_PAD_PTC29__GPIO_102 0x22cd
+ >;
+ };
+
pinctrl_usbh1_reg: gpio_usb_vbus {
fsl,pins = <
VF610_PAD_PTD4__GPIO_83 0x22ed
diff --git a/arch/arm/boot/dts/vf500-colibri-aster.dts b/arch/arm/boot/dts/vf500-colibri-aster.dts
new file mode 100644
index 000000000000..e314a7ab67ae
--- /dev/null
+++ b/arch/arm/boot/dts/vf500-colibri-aster.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 on Colibri Aster Board";
+ compatible = "toradex,vf500-colibri_vf50-on-aster", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
+
+&touchscreen {
+ vf50-ts-min-pressure = <200>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri-dual-eth.dts b/arch/arm/boot/dts/vf500-colibri-dual-eth.dts
new file mode 100644
index 000000000000..24990e241e0e
--- /dev/null
+++ b/arch/arm/boot/dts/vf500-colibri-dual-eth.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-dual-eth.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 on Dual Ethernet Board";
+ compatible = "toradex,vf500-colibri_vf50-on-dual-eth-board", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index 84f091d1fcf2..731ff0091c9d 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -37,6 +37,11 @@
};
};
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+};
+
&iomuxc {
vf610-colibri {
pinctrl_touchctrl_idle: touchctrl_idle {
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index e976d2fa1527..f2be079aae51 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -43,6 +43,16 @@
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
+
+ aips-bus@40080000 {
+
+ pmu@40089000 {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a5_cpu>;
+ };
+ };
+
};
};
diff --git a/arch/arm/boot/dts/vf610-colibri-aster.dts b/arch/arm/boot/dts/vf610-colibri-aster.dts
new file mode 100644
index 000000000000..55efc161001e
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri-aster.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61 on Colibri Aster Board";
+ compatible = "toradex,vf610-colibri_vf61-on-aster", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/arch/arm/boot/dts/vf610-colibri-dual-eth.dts b/arch/arm/boot/dts/vf610-colibri-dual-eth.dts
new file mode 100644
index 000000000000..a2eff553956c
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri-dual-eth.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-dual-eth.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61 on Dual Ethernet Board";
+ compatible = "toradex,vf610-colibri_vf61-on-dual-eth-board", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 2d7eab755210..a8d59f7bef06 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -17,4 +17,115 @@
memory {
reg = <0x80000000 0x10000000>;
};
+
+ sound {
+ compatible = "fsl,fsl-sai-audio-wm9712";
+ fsl,ac97-controller = <&sai2>;
+
+ fsl,model = "Colibri VF61 AC97 Audio";
+
+ fsl,audio-routing =
+ "Headphone", "HPOUTL",
+ "Headphone", "HPOUTR",
+ "LINEINL", "LineIn",
+ "LINEINR", "LineIn",
+ "MIC1", "Mic";
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <50000000>;
+};
+
+&sai0 {
+ compatible = "fsl,vf610-sai-clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai0>;
+ status = "okay";
+};
+
+&sai2 {
+ compatible = "fsl,vf610-sai-ac97";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep", "ac97-running", "ac97-reset",
+ "ac97-warm-reset";
+ pinctrl-0 = <&pinctrl_sai2_ac97_default>;
+ pinctrl-1 = <&pinctrl_sai2_ac97_sleep>;
+ pinctrl-2 = <&pinctrl_sai2_ac97_running>;
+ pinctrl-3 = <&pinctrl_sai2_ac97_reset>;
+ pinctrl-4 = <&pinctrl_sai2_ac97_warm_reset>;
+ ac97-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH &gpio0 8 GPIO_ACTIVE_HIGH
+ &gpio0 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_sai0: sai0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB23__SAI0_TX_BCLK 0x31C3
+ >;
+ };
+
+ pinctrl_sai2_ac97_default: sai2grp_1 {
+ fsl,pins = <
+ /* Pen-down */
+ VF610_PAD_PTA11__GPIO_4 0x22ed
+
+ /* GenIRQ */
+ VF610_PAD_PTB2__GPIO_24 0x22e1
+ >;
+ };
+
+ pinctrl_sai2_ac97_sleep: sai2grp_2 {
+ fsl,pins = <
+ /* AC97 Reset (cold reset) floating */
+ VF610_PAD_PTA23__GPIO_13 0x22c1
+ >;
+ };
+
+ pinctrl_sai2_ac97_running: sai2grp_3 {
+ fsl,pins = <
+ /* AC97 Bit clock */
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x31C3
+
+ /* AC97 SData Out */
+ VF610_PAD_PTA18__SAI2_TX_DATA 0x31C2
+
+ /* AC97 Sync */
+ VF610_PAD_PTA19__SAI2_TX_SYNC 0x31C3
+
+ /* AC97 SData In */
+ VF610_PAD_PTA22__SAI2_RX_DATA 0x0041
+ >;
+ };
+
+ pinctrl_sai2_ac97_reset: sai2grp_4 {
+ fsl,pins = <
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x31C1
+
+ /* AC97 SData Out (test mode selection) */
+ VF610_PAD_PTA18__GPIO_8 0x22c1
+
+ /* AC97 Sync (warm reset) */
+ VF610_PAD_PTA19__GPIO_9 0x22c1
+
+ /* AC97 Reset (cold reset) */
+ VF610_PAD_PTA23__GPIO_13 0x22c1
+ >;
+ };
+
+ pinctrl_sai2_ac97_warm_reset: sai2grp_5 {
+ fsl,pins = <
+ /* AC97 SData Out (test mode selection) */
+ VF610_PAD_PTA18__GPIO_8 0x22c1
+
+ /* AC97 Sync (warm reset) */
+ VF610_PAD_PTA19__GPIO_9 0x22c1
+ >;
+ };
+
+
+ };
};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 5438ee4be2ec..8419c0607f9b 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -96,6 +96,10 @@
&clks {
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+ assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+ <&clks VF610_CLK_ENET_TS_SEL>;
+ assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+ <&clks VF610_CLK_ENET_EXT>;
};
&dspi0 {
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 58bc6e448be5..f731b598e2c5 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -22,4 +22,31 @@
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
};
+
+ sema4: sema4@4001D000 {
+ compatible = "fsl,vf610-sema4";
+ reg = <0x4001D000 0x1000>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ CM4: cortexm4 {
+ compatible = "simple-bus";
+ ranges = <0x1f000000 0x3f000000 0x80000
+ 0x3f000000 0x3f000000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cortexm4core {
+ compatible = "fsl,vf610-m4";
+ reg = <0x1f000000 0x80000>,
+ <0x3f000000 0x80000>;
+ reg-names = "pc_ocram", "ps_ocram";
+ fsl,firmware = "freertos-rpmsg.elf";
+ };
+ };
+
+ rpmsg: rpmsg {
+ compatible = "fsl,vf610-rpmsg";
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 3cd1b27f2697..bf4e8048fac8 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -16,6 +16,8 @@
aliases {
can0 = &can0;
can1 = &can1;
+ ethernet0 = &fec0;
+ ethernet1 = &fec1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -53,9 +55,56 @@
soc {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&mscm_ir>;
+ compatible = "fsl,vf610-soc-bus", "simple-bus";
+ interrupt-parent = <&gpc>;
ranges;
+ fsl,rom-revision = <&ocrom 0x80>;
+ fsl,cpu-count = <&mscm_cpucfg 0x2C>;
+ fsl,l2-size = <&mscm_cpucfg 0x14>;
+ nvmem-cells = <&ocotp_cfg0>, <&ocotp_cfg1>;
+ nvmem-cell-names = "cfg0", "cfg1";
+
+ ocrom: ocrom@00000000 {
+ compatible = "fsl,vf610-ocrom", "syscon";
+ reg = <0x00000000 0x18000>;
+ };
+
+ ocram0: sram@3f000000 {
+ compatible = "mmio-sram";
+ reg = <0x3f000000 0x40000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x3f000000 0x40000>;
+
+ stbyram1@0 {
+ reg = <0x0 0x4000>;
+ label = "stbyram1";
+ pool;
+ };
+
+ stbyram2@4000 {
+ reg = <0x4000 0xc000>;
+ label = "stbyram2";
+ pool;
+ };
+ };
+
+ ocram1: sram@3f040000 {
+ compatible = "mmio-sram";
+ reg = <0x3f040000 0x40000>;
+ };
+
+ gfxram0: sram@3f400000 {
+ compatible = "mmio-sram";
+ reg = <0x3f400000 0x80000>;
+ };
+
+ /* used by L2 cache */
+ gfxram1: sram@3f480000 {
+ compatible = "mmio-sram";
+ reg = <0x3f480000 0x80000>;
+ };
aips0: aips-bus@40000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -70,10 +119,22 @@
mscm_ir: interrupt-controller@40001800 {
compatible = "fsl,vf610-mscm-ir";
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x40001800 0x400>;
fsl,cpucfg = <&mscm_cpucfg>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ cpu2cpu@40001800 {
+ reg = <0x40001800 0x40>;
+ interrupt-parent = <&mscm_ir>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1", "int2", "int3";
+ };
};
edma0: dma-controller@40018000 {
@@ -159,6 +220,9 @@
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <6>;
+ dmas = <&edma1 1 12>,
+ <&edma1 1 13>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -171,6 +235,37 @@
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
spi-num-chipselects = <4>;
+ dmas = <&edma1 1 14>,
+ <&edma1 1 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai0: sai@4002f000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x4002f000 0x1000>;
+ interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI0>,
+ <&clks VF610_CLK_SAI0_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 17>,
+ <&edma0 0 16>;
+ status = "disabled";
+ };
+
+ sai1: sai@40030000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40030000 0x1000>;
+ interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI1>,
+ <&clks VF610_CLK_SAI1_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 19>,
+ <&edma0 0 18>;
status = "disabled";
};
@@ -188,6 +283,20 @@
status = "disabled";
};
+ sai3: sai@40032000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40032000 0x1000>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI3>,
+ <&clks VF610_CLK_SAI3_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 9>,
+ <&edma0 1 8>;
+ status = "disabled";
+ };
+
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
@@ -234,6 +343,14 @@
<20000000>;
};
+ tcon0: timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
@@ -270,6 +387,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
+ fsl,gpio-wakeup = <&wakeup 22 0 8>; /* PTB0...PTB7 */
};
gpio1: gpio@4004a000 {
@@ -281,6 +399,10 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
+ fsl,gpio-wakeup = <&wakeup 1 8 2>, /* PTB11, PTB12 (NMI)*/
+ <&wakeup 4 10 1>, /* PTB14 */
+ <&wakeup 6 11 1>, /* PTB16 */
+ <&wakeup 9 12 2>; /* PTB19, PTB20 */
};
gpio2: gpio@4004b000 {
@@ -303,6 +425,9 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
+ fsl,gpio-wakeup = <&wakeup 1 14 1>, /* PTB27 */
+ <&wakeup 7 15 1>, /* PTC30 */
+ <&wakeup 29 16 1>; /* PTE20 */
};
gpio4: gpio@4004d000 {
@@ -321,6 +446,11 @@
reg = <0x40050000 0x400>;
};
+ scsc: scsc@40052000 {
+ compatible = "fsl,vf610-scsc";
+ reg = <0x40052000 0x1000>;
+ };
+
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
@@ -339,6 +469,17 @@
status = "disabled";
};
+ dcu0: dcu@40058000 {
+ compatible = "fsl,vf610-dcu";
+ reg = <0x40058000 0x1200>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DCU0>,
+ <&clks VF610_CLK_DCU0_DIV>;
+ clock-names = "dcu", "pix";
+ fsl,tcon = <&tcon0>;
+ status = "disabled";
+ };
+
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -367,8 +508,15 @@
status = "disabled";
};
+ wakeup: wkpu@4006a000 {
+ compatible = "fsl,vf610-wkpu";
+ reg = <0x4006a000 0x1000>;
+ interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_WKPU>;
+ };
+
clks: ccm@4006b000 {
- compatible = "fsl,vf610-ccm";
+ compatible = "fsl,vf610-ccm", "syscon";
reg = <0x4006b000 0x1000>;
clocks = <&sxosc>, <&fxosc>;
clock-names = "sxosc", "fxosc";
@@ -376,7 +524,7 @@
};
usbdev0: usb@40034000 {
- compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ compatible = "fsl,vf610-usb";
reg = <0x40034000 0x800>;
interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC0>;
@@ -399,6 +547,14 @@
reg = <0x4006e000 0x1000>;
interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ gpc: gpc@4006c000 {
+ compatible = "fsl,vf610-gpc";
+ reg = <0x4006c000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&mscm_ir>;
+ };
};
aips1: aips-bus@40080000 {
@@ -423,6 +579,22 @@
status = "disabled";
};
+ ocotp@400a5000 {
+ compatible = "fsl,vf610-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x400a5000 0xCF0>;
+ clocks = <&clks VF610_CLK_OCOTP>;
+
+ ocotp_cfg0: cfg0@410 {
+ reg = <0x410 0x4>;
+ };
+
+ ocotp_cfg1: cfg1@420 {
+ reg = <0x420 0x4>;
+ };
+ };
+
snvs0: snvs@400a7000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x400a7000 0x2000>;
@@ -455,6 +627,43 @@
status = "disabled";
};
+ dspi2: dspi2@400ac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ac000 0x1000>;
+ interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI2>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ dmas = <&edma1 0 10>,
+ <&edma1 0 11>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ dspi3: dspi3@400ad000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ad000 0x1000>;
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ dmas = <&edma1 0 12>,
+ <&edma1 0 13>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ddrmc: ddrmc@400ae000 {
+ compatible = "fsl,vf610-ddrmc";
+ reg = <0x400ae000 0x400>;
+ clocks = <&clks VF610_CLK_DDRMC>;
+ clock-names = "ddrc";
+ };
+
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
@@ -490,7 +699,7 @@
};
usbh1: usb@400b4000 {
- compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ compatible = "fsl,vf610-usb";
reg = <0x400b4000 0x800>;
interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC1>;
@@ -534,6 +743,24 @@
status = "disabled";
};
+ dac0: dac@400cc000 {
+ compatible = "fsl,vf610-dac";
+ reg = <0x400cc000 1000>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dac";
+ clocks = <&clks VF610_CLK_DAC0>;
+ status = "disabled";
+ };
+
+ dac1: dac@400cd000 {
+ compatible = "fsl,vf610-dac";
+ reg = <0x400cd000 1000>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dac";
+ clocks = <&clks VF610_CLK_DAC1>;
+ status = "disabled";
+ };
+
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
@@ -577,6 +804,18 @@
status = "disabled";
};
+ esw: l2-switch@400e8000 {
+ compatible = "fsl,eth-switch";
+ reg = <0x400e8000 0x1000 0x400d0000 0x2000>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_ESW>,
+ <&clks VF610_CLK_ENET>,
+ <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET1>;
+ clock-names = "esw", "enet", "enet0", "enet1";
+ status = "disabled";
+ };
+
i2c2: i2c@400e6000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -605,5 +844,10 @@
status = "disabled";
};
};
+
+ adc_hwmon: iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 16>, <&adc1 16>;
+ };
};
};
diff --git a/arch/arm/configs/colibri_vf_defconfig b/arch/arm/configs/colibri_vf_defconfig
new file mode 100644
index 000000000000..8a576db6a20c
--- /dev/null
+++ b/arch/arm/configs/colibri_vf_defconfig
@@ -0,0 +1,337 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_VF610=y
+CONFIG_SWP_EMULATE=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_CMA=y
+CONFIG_KEXEC=y
+# CONFIG_ATAGS_PROC is not set
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_WAKELOCKS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_IPGRE_DEMUX=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6_SIT=m
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_TABLES=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NFT_MASQ=y
+CONFIG_NFT_NAT=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_NFACCT=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NFT_CHAIN_NAT_IPV4=y
+CONFIG_NFT_MASQ_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_NF_TABLES_BRIDGE=y
+CONFIG_L2TP=m
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_CAN=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_PRIV=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FSL_L2_SWITCH=y
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MICREL_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_USB_NET_DRIVERS=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_NCM is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_FUSION_F0710A=m
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_VF610_SEMA4=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_DSPI=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+# CONFIG_RC_MAP is not set
+# CONFIG_RC_DECODERS is not set
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+# CONFIG_USB_GSPCA is not set
+CONFIG_DRM=y
+CONFIG_DRM_FSL_DCU=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_FSL_SAI_WM9712=y
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_HIDRAW=y
+CONFIG_HID_MULTITOUCH=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_WDM=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
+# CONFIG_MX3_IPU is not set
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VF610_CM4_RPROC=m
+CONFIG_IMX_RPMSG_PINGPONG=m
+CONFIG_IMX_RPMSG_TTY=m
+CONFIG_VF610_RPMSG=m
+CONFIG_SOC_BUS_VF610=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_IIO=y
+CONFIG_VF610_ADC=y
+CONFIG_VF610_DAC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_VF610_OCOTP=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 900c591913d5..5b07c7a31c31 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -94,7 +94,7 @@ void __init init_IRQ(void)
outer_cache.write_sec = machine_desc->l2c_write_sec;
ret = l2x0_of_init(machine_desc->l2c_aux_val,
machine_desc->l2c_aux_mask);
- if (ret)
+ if (ret && ret != -ENODEV)
pr_err("L2C: failed to init: %d\n", ret);
}
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 2d78900ee282..438cd1a06945 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -90,12 +90,15 @@ ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
+AFLAGS_suspend-vf610.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_VF610) += suspend-vf610.o
endif
ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
+obj-$(CONFIG_SOC_VF610) += pm-vf610.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 288f57222745..91d22f3a4dbe 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -75,6 +75,13 @@ enum mxc_cpu_pwr_mode {
STOP_POWER_OFF, /* STOP + SRPG */
};
+enum vf610_cpu_pwr_mode {
+ VF610_RUN,
+ VF610_LP_RUN,
+ VF610_STOP,
+ VF610_LP_STOP,
+};
+
enum mx3_cpu_pwr_mode {
MX3_RUN,
MX3_WAIT,
@@ -118,10 +125,12 @@ int imx_cpu_kill(unsigned int cpu);
void imx53_suspend(void __iomem *ocram_vbase);
extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase);
+void vf610_suspend(void __iomem *ocram_vbase);
#else
static inline void imx53_suspend(void __iomem *ocram_vbase) {}
static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
+static inline void vf610_suspend(void __iomem *ocram_vbase) {}
#endif
void v7_cpu_resume(void);
@@ -132,6 +141,7 @@ void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
void imx6sx_pm_init(void);
void imx6ul_pm_init(void);
+void vf610_pm_init(void);
#ifdef CONFIG_PM
void imx51_pm_init(void);
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index b20f6c14eda5..5ba668feea65 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -11,6 +11,13 @@
#include <linux/irqchip.h>
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+
+static void __init vf610_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ vf610_pm_init();
+}
static const char * const vf610_dt_compat[] __initconst = {
"fsl,vf500",
@@ -24,5 +31,6 @@ static const char * const vf610_dt_compat[] __initconst = {
DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
+ .init_machine = vf610_init_machine,
.dt_compat = vf610_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-imx/pm-vf610.c b/arch/arm/mach-imx/pm-vf610.c
new file mode 100644
index 000000000000..5a3df0caf23a
--- /dev/null
+++ b/arch/arm/mach-imx/pm-vf610.c
@@ -0,0 +1,704 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2014 Toradex AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifdef DEBUG
+#define pr_pmdebug(fmt, ...) pr_info("PM: VF610: " fmt "\n", ##__VA_ARGS__)
+#else
+#define pr_pmdebug(fmt, ...)
+#endif
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/genalloc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/tlb.h>
+
+#include "common.h"
+
+#define DDRMC_PHY_OFFSET 0x400
+
+#define CCR 0x0
+#define BM_CCR_FIRC_EN (0x1 << 16)
+#define BM_CCR_FXOSC_EN (0x1 << 12)
+
+#define CCSR 0x8
+#define BM_CCSR_DDRC_CLK_SEL (0x1 << 6)
+#define BM_CCSR_FAST_CLK_SEL (0x1 << 5)
+#define BM_CCSR_SLOW_CLK_SEL (0x1 << 4)
+#define BM_CCSR_SYS_CLK_SEL_MASK (0x7 << 0)
+
+#define CACRR 0xc
+
+#define CLPCR 0x2c
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_ANADIG_STOP_MODE (0x1 << 8)
+#define BM_CLPCR_FXOSC_BYPSEN (0x1 << 10)
+#define BM_CLPCR_FXOSC_PWRDWN (0x1 << 11)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 24)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 25)
+
+#define CGPR 0x64
+#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17)
+
+#define GPC_PGCR 0x0
+#define BM_PGCR_DS_STOP (0x1 << 7)
+#define BM_PGCR_DS_LPSTOP (0x1 << 6)
+#define BM_PGCR_WB_STOP (0x1 << 4)
+#define BM_PGCR_HP_OFF (0x1 << 3)
+#define BM_PGCR_PG_PD1 (0x1 << 0)
+
+#define GPC_LPMR 0x40
+#define BM_LPMR_RUN 0x0
+#define BM_LPMR_STOP 0x2
+
+#define ANATOP_PLL1_CTRL 0x270
+#define ANATOP_PLL2_CTRL 0x30
+#define ANATOP_PLL2_PFD 0x100
+#define BM_PLL_POWERDOWN (0x1 << 12)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_LOCK (0x1 << 31)
+#define BM_PLL_PFD2_CLKGATE (0x1 << 15)
+#define BM_PLL_USB_POWER (0x1 << 12)
+#define BM_PLL_EN_USB_CLKS (0x1 << 6)
+
+#define VF610_DDRMC_IO_NUM 94
+#define VF610_IOMUX_DDR_IO_NUM 48
+#define VF610_ANATOP_IO_NUM 2
+
+static struct vf610_cpu_pm_info *pm_info;
+static void __iomem *suspend_ocram_base;
+static void (*vf610_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
+static bool mem_suspend_available;
+
+#ifdef DEBUG
+static void __iomem *uart_membase;
+static unsigned long uart_clk;
+#endif
+
+static const u32 vf610_iomuxc_ddr_io_offset[] __initconst = {
+ 0x220, 0x224, 0x228, 0x22c, 0x230, 0x234, 0x238, 0x23c,
+ 0x240, 0x244, 0x248, 0x24c, 0x250, 0x254, 0x258, 0x25c,
+ 0x260, 0x264, 0x268, 0x26c, 0x270, 0x274, 0x278, 0x27c,
+ 0x280, 0x284, 0x288, 0x28c, 0x290, 0x294, 0x298, 0x29c,
+ 0x2a0, 0x2a4, 0x2a8, 0x2ac, 0x2b0, 0x2b4, 0x2b8, 0x2bc,
+ 0x2c0, 0x2c4, 0x2c8, 0x2cc, 0x2d0, 0x2d4, 0x2d8, 0x21c,
+};
+
+
+static const u32 vf610_ddrmc_io_offset[] __initconst = {
+ 0x00, 0x08, 0x28, 0x2c, 0x30, 0x34, 0x38,
+ 0x40, 0x44, 0x48, 0x50, 0x54, 0x58, 0x5c,
+ 0x60, 0x64, 0x68, 0x70, 0x74, 0x78, 0x7c,
+ 0x84, 0x88, 0x98, 0x9c, 0xa4, 0xc0,
+ 0x108, 0x10c, 0x114, 0x118, 0x120, 0x124,
+ 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c,
+ 0x148, 0x15c, 0x160, 0x164, 0x16c, 0x180,
+ 0x184, 0x188, 0x18c, 0x198, 0x1a4, 0x1a8,
+ 0x1b8, 0x1d4, 0x1d8, 0x1e0, 0x1e4, 0x1e8,
+ 0x1ec, 0x1f0, 0x1f8, 0x210, 0x224, 0x228,
+ 0x22c, 0x230, 0x23c, 0x240, 0x244, 0x248,
+ 0x24c, 0x250, 0x25c, 0x268, 0x26c, 0x278,
+ 0x268
+};
+
+static const u32 vf610_ddrmc_phy_io_offset[] __initconst = {
+ 0x00, 0x04, 0x08, 0x0c, 0x10,
+ 0x40, 0x44, 0x48, 0x4c, 0x50,
+ 0x80, 0x84, 0x88, 0x8c, 0x90,
+ 0xc4, 0xc8, 0xd0
+};
+
+/*
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * vf610_suspend code
+ * PM_INFO structure(vf610_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+struct vf610_pm_base {
+ phys_addr_t pbase;
+ void __iomem *vbase;
+};
+
+struct vf610_pm_socdata {
+ const char *anatop_compat;
+ const char *scsc_compat;
+ const char *wkpu_compat;
+ const char *ccm_compat;
+ const char *gpc_compat;
+ const char *src_compat;
+ const char *ddrmc_compat;
+ const char *iomuxc_compat;
+};
+
+static const struct vf610_pm_socdata vf610_pm_data __initconst = {
+ .anatop_compat = "fsl,vf610-anatop",
+ .scsc_compat = "fsl,vf610-scsc",
+ .wkpu_compat = "fsl,vf610-wkpu",
+ .ccm_compat = "fsl,vf610-ccm",
+ .gpc_compat = "fsl,vf610-gpc",
+ .src_compat = "fsl,vf610-src",
+ .ddrmc_compat = "fsl,vf610-ddrmc",
+ .iomuxc_compat = "fsl,vf610-iomuxc",
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-vf610.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-vf610.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+struct vf610_cpu_pm_info {
+ phys_addr_t pbase; /* The physical address of pm_info. */
+ phys_addr_t resume_addr; /* The physical resume address for asm code */
+ u32 cpu_type; /* Currently not used, leave it for alignment */
+ u32 pm_info_size; /* Size of pm_info. */
+ struct vf610_pm_base anatop_base;
+ struct vf610_pm_base scsc_base;
+ struct vf610_pm_base wkpu_base;
+ struct vf610_pm_base ccm_base;
+ struct vf610_pm_base gpc_base;
+ struct vf610_pm_base src_base;
+ struct vf610_pm_base ddrmc_base;
+ struct vf610_pm_base iomuxc_base;
+ struct vf610_pm_base l2_base;
+ u32 ccm_cacrr;
+ u32 ccm_ccsr;
+ u32 ddrmc_io_num; /* Number of MMDC IOs which need saved/restored. */
+ u32 ddrmc_io_val[VF610_DDRMC_IO_NUM][2]; /* To save offset and value */
+ u32 iomux_ddr_io_num;
+ u32 iomux_ddr_io_val[VF610_IOMUX_DDR_IO_NUM][2];
+} __aligned(8);
+
+#ifdef DEBUG
+static void vf610_uart_reinit(unsigned long int rate, unsigned long int baud)
+{
+ u8 tmp, c2;
+ u16 sbr, brfa;
+
+ /* UART_C2 */
+ c2 = __raw_readb(uart_membase + 0x3);
+ __raw_writeb(0, uart_membase + 0x3);
+
+ sbr = (u16) (rate / (baud * 16));
+ brfa = (rate / baud) - (sbr * 16);
+
+ tmp = ((sbr & 0x1f00) >> 8);
+ __raw_writeb(tmp, uart_membase + 0x0);
+ tmp = sbr & 0x00ff;
+ __raw_writeb(tmp, uart_membase + 0x1);
+
+ /* UART_C4 */
+ __raw_writeb(brfa & 0xf, uart_membase + 0xa);
+
+ __raw_writeb(c2, uart_membase + 0x3);
+}
+#else
+#define vf610_uart_reinit(rate, baud)
+#endif
+
+static void vf610_set(void __iomem *pll_base, u32 mask)
+{
+ writel(readl(pll_base) | mask, pll_base);
+}
+
+static void vf610_clr(void __iomem *pll_base, u32 mask)
+{
+ writel(readl(pll_base) & ~mask, pll_base);
+}
+
+int vf610_set_lpm(enum vf610_cpu_pwr_mode mode)
+{
+ void __iomem *ccm_base = pm_info->ccm_base.vbase;
+ void __iomem *gpc_base = pm_info->gpc_base.vbase;
+ void __iomem *anatop = pm_info->anatop_base.vbase;
+ u32 ccr = readl_relaxed(ccm_base + CCR);
+ u32 ccsr = readl_relaxed(ccm_base + CCSR);
+ u32 cacrr = readl_relaxed(ccm_base + CACRR);
+ u32 cclpcr = 0;
+ u32 gpc_pgcr = 0;
+
+ switch (mode) {
+ case VF610_LP_STOP:
+ /* Store clock settings */
+ pm_info->ccm_ccsr = ccsr;
+ pm_info->ccm_cacrr = cacrr;
+
+ ccr |= BM_CCR_FIRC_EN;
+ writel_relaxed(ccr, ccm_base + CCR);
+
+ cclpcr |= BM_CLPCR_ANADIG_STOP_MODE;
+ cclpcr |= BM_CLPCR_SBYOS;
+
+ cclpcr |= BM_CLPCR_MASK_SCU_IDLE;
+ cclpcr |= BM_CLPCR_MASK_L2CC_IDLE;
+ cclpcr |= BM_CLPCR_MASK_CORE1_WFI;
+ writel_relaxed(cclpcr, ccm_base + CLPCR);
+
+ gpc_pgcr |= BM_PGCR_DS_STOP;
+ gpc_pgcr |= BM_PGCR_DS_LPSTOP;
+ gpc_pgcr |= BM_PGCR_WB_STOP;
+ gpc_pgcr |= BM_PGCR_HP_OFF;
+ gpc_pgcr |= BM_PGCR_PG_PD1;
+ writel_relaxed(gpc_pgcr, gpc_base + GPC_PGCR);
+ break;
+ case VF610_STOP:
+ cclpcr &= ~BM_CLPCR_ANADIG_STOP_MODE;
+ cclpcr |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+ cclpcr |= BM_CLPCR_SBYOS;
+ writel_relaxed(cclpcr, ccm_base + CLPCR);
+
+ gpc_pgcr |= BM_PGCR_DS_STOP;
+ gpc_pgcr |= BM_PGCR_HP_OFF;
+ writel_relaxed(gpc_pgcr, gpc_base + GPC_PGCR);
+
+ /* fall-through */
+ case VF610_LP_RUN:
+ /* Store clock settings */
+ pm_info->ccm_ccsr = ccsr;
+ pm_info->ccm_cacrr = cacrr;
+
+ ccr |= BM_CCR_FIRC_EN;
+ writel_relaxed(ccr, ccm_base + CCR);
+
+ /* Enable PLL2 for DDR clock */
+ vf610_set(anatop + ANATOP_PLL2_CTRL, BM_PLL_ENABLE);
+ vf610_clr(anatop + ANATOP_PLL2_CTRL, BM_PLL_POWERDOWN);
+ vf610_clr(anatop + ANATOP_PLL2_CTRL, BM_PLL_BYPASS);
+ while (!(readl(anatop + ANATOP_PLL2_CTRL) & BM_PLL_LOCK));
+ vf610_clr(anatop + ANATOP_PLL2_PFD, BM_PLL_PFD2_CLKGATE);
+
+ /* Switch internal OSC's */
+ ccsr &= ~BM_CCSR_FAST_CLK_SEL;
+ ccsr &= ~BM_CCSR_SLOW_CLK_SEL;
+
+ /* Select PLL2 as DDR clock */
+ ccsr &= ~BM_CCSR_DDRC_CLK_SEL;
+ writel_relaxed(ccsr, ccm_base + CCSR);
+
+ ccsr &= ~BM_CCSR_SYS_CLK_SEL_MASK;
+ writel_relaxed(ccsr, ccm_base + CCSR);
+ vf610_uart_reinit(4000000UL, 115200);
+
+ vf610_set(anatop + ANATOP_PLL1_CTRL, BM_PLL_BYPASS);
+ writel_relaxed(BM_LPMR_STOP, gpc_base + GPC_LPMR);
+ break;
+ case VF610_RUN:
+ writel_relaxed(BM_LPMR_RUN, gpc_base + GPC_LPMR);
+
+ vf610_clr(anatop + ANATOP_PLL1_CTRL, BM_PLL_BYPASS);
+ while(!(readl(anatop + ANATOP_PLL1_CTRL) & BM_PLL_LOCK));
+
+ /* Restore clock settings */
+ writel(pm_info->ccm_ccsr, ccm_base + CCSR);
+
+ vf610_uart_reinit(uart_clk, 115200);
+ pr_pmdebug("resuming, uart_reinit done");
+
+ /* Disable PLL2 if not needed */
+ if (pm_info->ccm_ccsr & BM_CCSR_DDRC_CLK_SEL)
+ vf610_set(anatop + ANATOP_PLL2_CTRL, BM_PLL_POWERDOWN);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int vf610_suspend_finish(unsigned long val)
+{
+ if (!vf610_suspend_in_ocram_fn) {
+ cpu_do_idle();
+ } else {
+ /*
+ * call low level suspend function in ocram,
+ * as we need to float DDR IO.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+ outer_flush_all();
+ vf610_suspend_in_ocram_fn(suspend_ocram_base);
+ }
+
+ return 0;
+}
+
+static int vf610_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ vf610_set_lpm(VF610_STOP);
+ flush_cache_all();
+
+ /* zzZZZzzz */
+ cpu_do_idle();
+
+ vf610_set_lpm(VF610_RUN);
+ break;
+ case PM_SUSPEND_MEM:
+ vf610_set_lpm(VF610_LP_STOP);
+
+ cpu_suspend(0, vf610_suspend_finish);
+ outer_resume();
+
+ vf610_set_lpm(VF610_RUN);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int vf610_pm_valid(suspend_state_t state)
+{
+ return (state == PM_SUSPEND_STANDBY ||
+ (state == PM_SUSPEND_MEM && mem_suspend_available));
+}
+
+static const struct platform_suspend_ops vf610_pm_ops = {
+ .enter = vf610_pm_enter,
+ .valid = vf610_pm_valid,
+};
+
+static int __init imx_pm_get_base(struct vf610_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+#ifdef DEBUG
+static int __init vf610_uart_init(void)
+{
+ struct device_node *dn;
+ const char *name;
+ struct clk *clk;
+ int ret;
+
+ name = of_get_property(of_chosen, "stdout-path", NULL);
+ if (name == NULL)
+ return -ENODEV;
+
+ dn = of_find_node_by_path(name);
+ if (!dn)
+ return -ENODEV;
+
+ clk = of_clk_get(dn, 0);
+
+ if (!clk) {
+ ret = PTR_ERR(clk);
+ goto put_node;
+ }
+
+ uart_clk = clk_get_rate(clk);
+
+ uart_membase = of_iomap(dn, 0);
+ if (!clk) {
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ ret = 0;
+
+put_node:
+ of_node_put(dn);
+ return ret;
+}
+#endif
+
+static void vf610_power_off(void)
+{
+ void __iomem *gpc_base = pm_info->gpc_base.vbase;
+ u32 gpc_pgcr;
+
+ /*
+ * Power gate Power Domain 1
+ */
+ gpc_pgcr = readl_relaxed(gpc_base + GPC_PGCR);
+ gpc_pgcr |= BM_PGCR_PG_PD1;
+ writel_relaxed(gpc_pgcr, gpc_base + GPC_PGCR);
+
+ /* Set low power mode */
+ vf610_set_lpm(VF610_STOP);
+}
+
+static int __init vf610_suspend_mem_init(const struct vf610_pm_socdata *socdata)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+ bool has_cke_reset_pulls = false;
+ phys_addr_t ocram_pbase;
+ struct gen_pool *ocram_pool;
+ size_t ocram_size;
+ unsigned long ocram_base;
+ int ret = 0, reg = 0;
+ int i;
+
+ node = of_find_compatible_node(NULL, NULL, socdata->ddrmc_compat);
+ if (node) {
+ has_cke_reset_pulls =
+ of_property_read_bool(node, "fsl,has-cke-reset-pulls");
+
+ of_node_put(node);
+ }
+
+ if (!has_cke_reset_pulls) {
+ pr_info("PM: No CKE/RESET pulls, disable Suspend-to-RAM\n");
+ return -ENODEV;
+ }
+
+ node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!node) {
+ pr_warn("%s: failed to find ocram node!\n", __func__);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev) {
+ pr_warn("%s: failed to find ocram device!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_pool = gen_pool_get(&pdev->dev, "stbyram1");
+ if (!ocram_pool) {
+ pr_warn("%s: ocram pool unavailable!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_size = gen_pool_size(ocram_pool);
+ ocram_base = gen_pool_alloc(ocram_pool, ocram_size);
+ if (!ocram_base) {
+ pr_warn("%s: unable to alloc ocram!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+ suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, ocram_size, false);
+
+ pm_info = suspend_ocram_base;
+ pm_info->pbase = ocram_pbase;
+ pm_info->resume_addr = virt_to_phys(cpu_resume);
+
+ pm_info->ddrmc_io_num = VF610_DDRMC_IO_NUM;
+
+ ret = imx_pm_get_base(&pm_info->ddrmc_base, socdata->ddrmc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrmc base %d!\n", __func__, ret);
+ goto put_node;
+ }
+
+ ret = imx_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
+ goto iomuxc_map_failed;
+ }
+
+ /* Store DDRMC registers */
+ for (i = 0; i < ARRAY_SIZE(vf610_ddrmc_io_offset); i++, reg++) {
+ pm_info->ddrmc_io_val[reg][0] = vf610_ddrmc_io_offset[i];
+ pm_info->ddrmc_io_val[reg][1] =
+ readl_relaxed(pm_info->ddrmc_base.vbase +
+ vf610_ddrmc_io_offset[i]);
+ }
+
+ /* Store DDRMC PHY registers */
+ for (i = 0; i < ARRAY_SIZE(vf610_ddrmc_phy_io_offset); i++, reg++) {
+ pm_info->ddrmc_io_val[reg][0] = vf610_ddrmc_phy_io_offset[i] +
+ DDRMC_PHY_OFFSET;
+ pm_info->ddrmc_io_val[reg][1] =
+ readl_relaxed(pm_info->ddrmc_base.vbase +
+ DDRMC_PHY_OFFSET + vf610_ddrmc_phy_io_offset[i]);
+ }
+
+ /* Store IOMUX DDR pad registers */
+ pm_info->iomux_ddr_io_num = VF610_IOMUX_DDR_IO_NUM;
+ for (i = 0; i < ARRAY_SIZE(vf610_iomuxc_ddr_io_offset); i++) {
+ pm_info->iomux_ddr_io_val[i][0] = vf610_iomuxc_ddr_io_offset[i];
+ pm_info->iomux_ddr_io_val[i][1] =
+ readl_relaxed(pm_info->iomuxc_base.vbase +
+ vf610_iomuxc_ddr_io_offset[i]);
+ }
+
+ vf610_suspend_in_ocram_fn = fncpy(
+ suspend_ocram_base + sizeof(*pm_info),
+ &vf610_suspend, ocram_size - sizeof(*pm_info));
+
+ pr_info("PM: CKE/RESET pulls available, enable Suspend-to-RAM\n");
+ goto put_node;
+
+iomuxc_map_failed:
+ iounmap(pm_info->ddrmc_base.vbase);
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init vf610_suspend_init(const struct vf610_pm_socdata *socdata)
+{
+ int ret;
+ struct device_node *soc_node;
+
+#ifdef DEBUG
+ ret = vf610_uart_init();
+ if (ret < 0)
+ return ret;
+#endif
+
+ soc_node = of_find_node_by_path("/soc");
+ if (soc_node == NULL)
+ return -ENODEV;
+
+ if (of_property_read_bool(soc_node, "fsl,use-lpm-poweroff"))
+ pm_power_off = vf610_power_off;
+
+ if (vf610_suspend_mem_init(socdata)) {
+ /*
+ * Suspend to memory for some reason not available, use DDR
+ * for standby mode
+ */
+ pm_info = kzalloc(sizeof(*pm_info), GFP_KERNEL);
+ } else {
+ mem_suspend_available = true;
+ }
+
+ pm_info->pm_info_size = sizeof(*pm_info);
+
+ ret = imx_pm_get_base(&pm_info->anatop_base, socdata->anatop_compat);
+ if (ret) {
+ pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
+ return ret;
+ }
+
+ ret = imx_pm_get_base(&pm_info->scsc_base, socdata->scsc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get scsc base %d!\n", __func__, ret);
+ goto scsc_map_failed;
+ }
+
+ ret = imx_pm_get_base(&pm_info->ccm_base, socdata->ccm_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
+ goto ccm_map_failed;
+ }
+
+ ret = imx_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+ goto gpc_map_failed;
+ }
+
+ ret = imx_pm_get_base(&pm_info->src_base, socdata->src_compat);
+ if (ret) {
+ pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+ goto src_map_failed;
+ }
+
+ ret = imx_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
+ if (ret == -ENODEV)
+ ret = 0;
+ if (ret) {
+ pr_warn("%s: failed to get pl310-cache base %d!\n",
+ __func__, ret);
+ goto pl310_cache_map_failed;
+ }
+
+ suspend_set_ops(&vf610_pm_ops);
+
+ return 0;
+
+pl310_cache_map_failed:
+ iounmap(pm_info->src_base.vbase);
+src_map_failed:
+ iounmap(pm_info->gpc_base.vbase);
+gpc_map_failed:
+ iounmap(pm_info->ccm_base.vbase);
+ccm_map_failed:
+ iounmap(pm_info->scsc_base.vbase);
+scsc_map_failed:
+ iounmap(pm_info->anatop_base.vbase);
+
+ if (mem_suspend_available) {
+ iounmap(pm_info->ddrmc_base.vbase);
+ iounmap(pm_info->iomuxc_base.vbase);
+ }
+
+ return ret;
+}
+
+void __init vf610_pm_init(void)
+{
+ int ret;
+
+ if (IS_ENABLED(CONFIG_SUSPEND)) {
+ ret = vf610_suspend_init(&vf610_pm_data);
+ if (ret)
+ pr_warn("%s: No DDR LPM support with suspend %d!\n",
+ __func__, ret);
+ }
+}
+
diff --git a/arch/arm/mach-imx/suspend-vf610.S b/arch/arm/mach-imx/suspend-vf610.S
new file mode 100644
index 000000000000..595dd4e2c74c
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-vf610.S
@@ -0,0 +1,448 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2015 Toradex AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * vf610_suspend code
+ * PM_INFO structure(vf610_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct vf610_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-vf610.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_PBASE_OFFSET 0x0
+#define PM_INFO_RESUME_ADDR_OFFSET 0x4
+#define PM_INFO_CPU_TYPE_OFFSET 0x8
+#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
+#define PM_INFO_VF610_ANATOP_P_OFFSET 0x10
+#define PM_INFO_VF610_ANATOP_V_OFFSET 0x14
+#define PM_INFO_VF610_SCSC_P_OFFSET 0x18
+#define PM_INFO_VF610_SCSC_V_OFFSET 0x1C
+#define PM_INFO_VF610_WKPU_P_OFFSET 0x20
+#define PM_INFO_VF610_WKPU_V_OFFSET 0x24
+#define PM_INFO_VF610_CCM_P_OFFSET 0x28
+#define PM_INFO_VF610_CCM_V_OFFSET 0x2C
+#define PM_INFO_VF610_GPC_P_OFFSET 0x30
+#define PM_INFO_VF610_GPC_V_OFFSET 0x34
+#define PM_INFO_VF610_SRC_P_OFFSET 0x38
+#define PM_INFO_VF610_SRC_V_OFFSET 0x3C
+#define PM_INFO_VF610_DDRMC_P_OFFSET 0x40
+#define PM_INFO_VF610_DDRMC_V_OFFSET 0x44
+#define PM_INFO_VF610_IOMUXC_P_OFFSET 0x48
+#define PM_INFO_VF610_IOMUXC_V_OFFSET 0x4c
+#define PM_INFO_VF610_L2_P_OFFSET 0x50
+#define PM_INFO_VF610_L2_V_OFFSET 0x54
+#define PM_INFO_CCM_CACRR 0x58
+#define PM_INFO_CCM_CCSR 0x5c
+#define PM_INFO_DDRMC_IO_NUM_OFFSET 0x60
+#define PM_INFO_DDRMC_IO_VAL_OFFSET 0x64
+#define PM_INFO_IOMUXC_DDR_IO_NUM_OFFSET (0x64 + 94 * 2 * 4)
+#define PM_INFO_IOMUXC_DDR_IO_VAL_OFFSET (0x68 + 94 * 2 * 4)
+
+#define VF610_ANADIG_PLL2_CTRL 0x30
+
+#define VF610_ANADIG_MISC0 0x150
+#define VF610_ANADIG_MISC0_CLK_24M_IRC_XTAL_SEL (0x1 < 13)
+
+#define VF610_ANADIG_PLL1_CTRL 0x270
+
+#define VF610_ANADIG_POWERDOWN (1 << 12)
+#define VF610_ANADIG_ENABLE (1 << 13)
+#define VF610_ANADIG_BYPASS (1 << 16)
+#define VF610_ANADIG_LOCK (1 << 31)
+
+#define VF610_SCSC_SIRC 0x0
+#define VF610_SCSC_SIRC_SIRC_EN (0x1 << 0)
+#define VF610_SCSC_SOSC 0x4
+#define VF610_SCSC_SOSC_SOSC_EN (0x1 << 0)
+
+#define VF610_GPC_PGCR 0x0
+#define VF610_GPC_LPMR 0x40
+
+#define VF610_CCM_CCR 0x00
+#define VF610_CCM_CCR_FXOSC_EN (0x1 << 12)
+
+#define VF610_CCM_CCSR 0x08
+#define VF610_CCM_CCSR_DDRC_CLK_SEL (0x1 << 6)
+#define VF610_CCM_CCSR_FAST_CLK_SEL (0x1 << 5)
+
+#define VF610_CCM_CACRR 0x0C
+
+#define VF610_CCM_CLPCR 0x2C
+#define VF610_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define VF610_CCM_CLPCR_FXOSC_PWRDWN (0x1 << 11)
+
+#define VF610_CCM_CCGR0 0x40
+#define VF610_CCM_CCGR2 0x48
+#define VF610_CCM_CCGR3 0x4C
+#define VF610_CCM_CCGR4 0x50
+#define VF610_CCM_CCGR6 0x58
+
+#define VF610_SRC_GPR0 0x20
+#define VF610_SRC_GPR1 0x24
+#define VF610_SRC_MISC2 0x54
+
+#define VF610_DDRMC_CR00 0x0
+#define VF610_DDRMC_CR00_START (0x1 << 0)
+
+#define VF610_DDRMC_CR33 0x84
+#define VF610_DDRMC_CR33_PWUP_SREF_EX (0x1 << 0)
+
+#define VF610_DDRMC_CR34 0x88
+
+#define VF610_DDRMC_CR35 0x8C
+#define VF610_DDRMC_CR35_LP_CMD(cmd) ((cmd) << 8)
+
+#define VF610_DDRMC_CR80 0x140
+#define VF610_DDRMC_CR80_LP_COMPLETE (0x1 << 9)
+#define VF610_DDRMC_CR80_INIT_COMPLETE (0x1 << 8)
+#define VF610_DDRMC_CR81 0x144
+
+ .align 3
+
+ /*
+ * Take DDR RAM out of Low-Power mode
+ */
+ .macro resume_ddrmc ddrmc_base
+
+ /* Clear low power complete flag... */
+ ldr r6, =VF610_DDRMC_CR80_LP_COMPLETE
+ str r6, [\ddrmc_base, #VF610_DDRMC_CR81]
+
+ ldr r6, [\ddrmc_base, #VF610_DDRMC_CR35]
+ orr r6, r6, #VF610_DDRMC_CR35_LP_CMD(0x9)
+ str r6, [\ddrmc_base, #VF610_DDRMC_CR35]
+
+1:
+ ldr r5, [\ddrmc_base, #VF610_DDRMC_CR80]
+ ands r5, r5, #VF610_DDRMC_CR80_LP_COMPLETE
+ beq 1b
+
+ .endm
+
+ .macro enable_syspll pll_base
+
+ ldr r5, [\pll_base]
+ orr r5, r5, #VF610_ANADIG_ENABLE
+ bic r5, r5, #VF610_ANADIG_POWERDOWN
+ bic r5, r5, #VF610_ANADIG_BYPASS
+ str r5, [\pll_base]
+
+1:
+ ldr r5, [\pll_base]
+ tst r5, #VF610_ANADIG_LOCK
+ beq 1b
+
+ .endm
+
+ENTRY(vf610_suspend)
+ ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
+ ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+ ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+ /*
+ * make sure TLB contain the addr we want,
+ * as we will access them after MMDC IO floated.
+ */
+
+ ldr r11, [r0, #PM_INFO_VF610_DDRMC_V_OFFSET]
+ ldr r6, [r11, #0x0]
+ ldr r11, [r0, #PM_INFO_VF610_GPC_V_OFFSET]
+ ldr r6, [r11, #0x0]
+ ldr r11, [r0, #PM_INFO_VF610_SRC_V_OFFSET]
+ ldr r6, [r11, #0x0]
+ ldr r11, [r0, #PM_INFO_VF610_CCM_V_OFFSET]
+ ldr r6, [r11, #0x0]
+
+ ldr r11, [r0, #PM_INFO_VF610_SRC_V_OFFSET]
+
+ /* Disable DDR RESET */
+ ldr r6, [r11, #VF610_SRC_MISC2]
+ orr r6, r6, #0x1
+ str r6, [r11, #VF610_SRC_MISC2]
+
+ /* Set ENTRY/ARGUMENT register */
+ ldr r6, =vf610_suspend
+ ldr r7, =resume
+ sub r7, r7, r6
+ add r8, r1, r4
+ add r9, r8, r7
+ str r9, [r11, #VF610_SRC_GPR0]
+ str r1, [r11, #VF610_SRC_GPR1]
+
+ /* Put memory in self refresh... */
+ ldr r11, [r0, #PM_INFO_VF610_DDRMC_V_OFFSET]
+
+ ldr r6, =VF610_DDRMC_CR80_LP_COMPLETE
+ str r6, [r11, #VF610_DDRMC_CR81]
+
+ ldr r6, [r11, #VF610_DDRMC_CR35]
+ orr r6, r6, #VF610_DDRMC_CR35_LP_CMD(0xA)
+ str r6, [r11, #VF610_DDRMC_CR35]
+
+ddrmc_cmd_complete:
+ /* A Unfixed module seems to hang at this read.... */
+ ldr r5, [r11, #VF610_DDRMC_CR80]
+ ands r5, r5, #VF610_DDRMC_CR80_LP_COMPLETE
+ beq ddrmc_cmd_complete
+
+ /* switch to internal FIRC */
+ ldr r11, [r0, #PM_INFO_VF610_CCM_V_OFFSET]
+ ldr r5, [r11, #VF610_CCM_CCSR]
+ bic r5, r5, #0x30 /* FAST_/SLOW_CLK_SEL */
+ str r5, [r11, #VF610_CCM_CCSR]
+ bic r5, r5, #0x07 /* SYS_CLK_SEL */
+ str r5, [r11, #VF610_CCM_CCSR]
+
+ /* LP-Mode: STOP */
+ ldr r11, [r0, #PM_INFO_VF610_GPC_V_OFFSET]
+ ldr r6, =0x02
+ str r6, [r11, #VF610_GPC_LPMR]
+
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ /* If we get here, there is already an interrupt pending. Restore... */
+ ldr r6, =0x00
+ str r6, [r11, #VF610_GPC_LPMR]
+
+ /* Get previous CCSR/CACRR settings */
+ ldr r11, [r0, #PM_INFO_VF610_CCM_V_OFFSET]
+ ldr r5, [r0, #PM_INFO_CCM_CCSR]
+ str r5, [r11, #VF610_CCM_CCSR]
+
+ ldr r5, [r0, #PM_INFO_CCM_CACRR]
+ str r5, [r11, #VF610_CCM_CACRR]
+
+ ldr r11, [r0, #PM_INFO_VF610_DDRMC_V_OFFSET]
+ resume_ddrmc r11
+
+ ret lr
+
+/* Resume path if CPU uses the SRC_GPR0 (PERSISTENT_ENTRY0) */
+resume:
+ /* invalidate L1 I-cache first */
+ mov r6, #0x0
+ mcr p15, 0, r6, c7, c5, 0
+ mcr p15, 0, r6, c7, c5, 6
+
+ /* enable the Icache and branch prediction */
+ mov r6, #0x1800
+ mcr p15, 0, r6, c1, c0, 0
+ isb
+
+ ldr r11, [r0, #PM_INFO_VF610_CCM_P_OFFSET]
+
+ ldr r5, [r11, #VF610_CCM_CCSR]
+ orr r5, r5, #(1 << 13)
+ str r5, [r11, #VF610_CCM_CCSR]
+
+ /* enable UART0 */
+ ldr r5, [r11, #VF610_CCM_CCGR0]
+ orr r5, r5, #0xC000
+ str r5, [r11, #VF610_CCM_CCGR0]
+
+ /* enable IOMUX, PORT A-E */
+ ldr r5, [r11, #VF610_CCM_CCGR2]
+ ldr r6, =0xFFF0000
+ orr r5, r5, r6
+ str r5, [r11, #VF610_CCM_CCGR2]
+
+ /* enable ANADIG and SCSM */
+ ldr r5, [r11, #VF610_CCM_CCGR3]
+ orr r5, r5, #0x33
+ str r5, [r11, #VF610_CCM_CCGR3]
+
+ /* enable GPC, CCM and WKUP */
+ ldr r5, [r11, #VF610_CCM_CCGR4]
+ orr r5, r5, #0x3f00000
+ str r5, [r11, #VF610_CCM_CCGR4]
+
+ /* enable mmdc */
+ ldr r5, [r11, #VF610_CCM_CCGR6]
+ orr r5, r5, #0x30000000
+ str r5, [r11, #VF610_CCM_CCGR6]
+
+ /* Mux UART0 */
+ ldr r5,=0x1021a2
+ ldr r6,=0x40048080
+ str r5, [r6, #0x0]
+ ldr r5,=0x1021a1
+ ldr r6,=0x40048084
+ str r5, [r6, #0x0]
+
+ /* Set IOMUX for DDR pads */
+ ldr r11, [r0, #PM_INFO_VF610_IOMUXC_P_OFFSET]
+
+ ldr r6, [r0, #PM_INFO_IOMUXC_DDR_IO_NUM_OFFSET]
+ ldr r7, =PM_INFO_IOMUXC_DDR_IO_VAL_OFFSET
+ add r7, r7, r0
+
+loop_iomuxc_ddr_restore:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r11, r8]
+ subs r6, r6, #0x1
+ bne loop_iomuxc_ddr_restore
+
+
+ /* Enable slow oscilators */
+ ldr r11, [r0, #PM_INFO_VF610_SCSC_P_OFFSET]
+
+ ldr r5, [r11, #VF610_SCSC_SOSC]
+ orr r5, r5, #VF610_SCSC_SOSC_SOSC_EN
+ str r5, [r11, #VF610_SCSC_SOSC]
+
+ ldr r5, [r11, #VF610_SCSC_SIRC]
+ orr r5, r5, #VF610_SCSC_SIRC_SIRC_EN
+ str r5, [r11, #VF610_SCSC_SIRC]
+
+ /* Enable fast osciallator */
+ ldr r11, [r0, #PM_INFO_VF610_CCM_P_OFFSET]
+
+ ldr r5, [r11, #VF610_CCM_CLPCR]
+ bic r5, r5, #VF610_CCM_CLPCR_DIS_REF_OSC
+ bic r5, r5, #VF610_CCM_CLPCR_FXOSC_PWRDWN
+ str r5, [r11, #VF610_CCM_CLPCR]
+
+ ldr r5, [r11, #VF610_CCM_CCR]
+ orr r5, r5, #VF610_CCM_CCR_FXOSC_EN
+ str r5, [r11, #VF610_CCM_CCR]
+
+ ldr r5, [r11, #VF610_CCM_CCSR]
+ orr r5, r5, #VF610_CCM_CCSR_FAST_CLK_SEL
+ str r5, [r11, #VF610_CCM_CCSR]
+
+ ldr r11, [r0, #PM_INFO_VF610_ANATOP_P_OFFSET]
+
+ /* Select external FXOSC */
+ ldr r5, [r11, #VF610_ANADIG_MISC0]
+ bic r5, r5, #VF610_ANADIG_MISC0_CLK_24M_IRC_XTAL_SEL
+ str r5, [r11, #VF610_ANADIG_MISC0]
+
+ /* pll1 enable */
+ add r6, r11, #VF610_ANADIG_PLL1_CTRL
+ enable_syspll r6
+
+ /* enable pll2 only if required for DDR */
+ ldr r5, [r0, #PM_INFO_CCM_CCSR]
+ tst r5, #VF610_CCM_CCSR_DDRC_CLK_SEL
+ bne switch_sysclk
+
+ /* pll2 enable */
+ add r6, r11, #VF610_ANADIG_PLL2_CTRL
+ enable_syspll r6
+
+switch_sysclk:
+
+ /* Enable PFD and switch to fast clock */
+ ldr r11, [r0, #PM_INFO_VF610_CCM_P_OFFSET]
+
+ /* Get previous CCSR/CACRR settings */
+ ldr r5, [r0, #PM_INFO_CCM_CCSR]
+ str r5, [r11, #VF610_CCM_CCSR]
+
+ ldr r5, [r0, #PM_INFO_CCM_CACRR]
+ str r5, [r11, #VF610_CCM_CACRR]
+
+ /* Restore memory configuration */
+ ldr r11, [r0, #PM_INFO_VF610_DDRMC_P_OFFSET]
+
+ ldr r6, [r0, #PM_INFO_DDRMC_IO_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRMC_IO_VAL_OFFSET
+ add r7, r7, r0
+
+ /* Clear start bit of first memory register, do not start yet... */
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ bic r9, r9, #VF610_DDRMC_CR00_START
+ str r9, [r11, r8]
+ subs r6, r6, #0x1
+
+loop_ddrmc_restore:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r11, r8]
+ subs r6, r6, #0x1
+ bne loop_ddrmc_restore
+
+ /* Set PWUP_SREF_EX to avoid a full memory initialization */
+ ldr r6, [r11, #VF610_DDRMC_CR33]
+ orr r6, r6, #VF610_DDRMC_CR33_PWUP_SREF_EX
+ str r6, [r11, #VF610_DDRMC_CR33]
+
+ /* Start initialization */
+ ldr r6, =VF610_DDRMC_CR80_INIT_COMPLETE
+ str r6, [r11, #VF610_DDRMC_CR81]
+
+ ldr r6, [r11, #VF610_DDRMC_CR00]
+ orr r6, r6, #VF610_DDRMC_CR00_START
+ str r6, [r11, #VF610_DDRMC_CR00]
+
+ddrmc_initializing:
+ ldr r5, [r11, #VF610_DDRMC_CR80]
+ ands r5, r5, #VF610_DDRMC_CR80_INIT_COMPLETE
+ beq ddrmc_initializing
+
+ resume_ddrmc r11
+
+ /* LP-Mode: RUN */
+ ldr r11, [r0, #PM_INFO_VF610_GPC_P_OFFSET]
+ ldr r5, =0x0
+ str r5, [r11, #VF610_GPC_LPMR]
+
+ /* Enable SNVS */
+ ldr r3, [r0, #PM_INFO_VF610_CCM_P_OFFSET]
+ ldr r4, [r3, #VF610_CCM_CCGR6]
+ orr r4, r4, #0x0000C000
+ str r4, [r3, #VF610_CCM_CCGR6]
+
+ /* Enable SNVS access (RTC) */
+ ldr r11, =0x400a7000
+ ldr r4, =0x80000100
+ str r4, [r11, #0x4]
+
+ /* get physical resume address from pm_info. */
+ ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+
+ ret lr
+ENDPROC(vf610_suspend)
+
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 0bf17576dd2a..1d41f50f3558 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -19,8 +19,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/efi.h>
-#include <linux/verify_pefile.h>
-#include <keys/system_keyring.h>
+#include <linux/verification.h>
#include <asm/bootparam.h>
#include <asm/setup.h>
@@ -532,18 +531,9 @@ static int bzImage64_cleanup(void *loader_data)
#ifdef CONFIG_KEXEC_BZIMAGE_VERIFY_SIG
static int bzImage64_verify_sig(const char *kernel, unsigned long kernel_len)
{
- bool trusted;
- int ret;
-
- ret = verify_pefile_signature(kernel, kernel_len,
- system_trusted_keyring,
- VERIFYING_KEXEC_PE_SIGNATURE,
- &trusted);
- if (ret < 0)
- return ret;
- if (!trusted)
- return -EKEYREJECTED;
- return 0;
+ return verify_pefile_signature(kernel, kernel_len,
+ NULL,
+ VERIFYING_KEXEC_PE_SIGNATURE);
}
#endif
diff --git a/certs/Kconfig b/certs/Kconfig
index b030b9c7ed34..f0f8a4433685 100644
--- a/certs/Kconfig
+++ b/certs/Kconfig
@@ -39,4 +39,20 @@ config SYSTEM_TRUSTED_KEYS
form of DER-encoded *.x509 files in the top-level build directory,
those are no longer used. You will need to set this option instead.
+config SYSTEM_EXTRA_CERTIFICATE
+ bool "Reserve area for inserting a certificate without recompiling"
+ depends on SYSTEM_TRUSTED_KEYRING
+ help
+ If set, space for an extra certificate will be reserved in the kernel
+ image. This allows introducing a trusted certificate to the default
+ system keyring without recompiling the kernel.
+
+config SYSTEM_EXTRA_CERTIFICATE_SIZE
+ int "Number of bytes to reserve for the extra certificate"
+ depends on SYSTEM_EXTRA_CERTIFICATE
+ default 4096
+ help
+ This is the number of bytes reserved in the kernel image for a
+ certificate to be inserted.
+
endmenu
diff --git a/certs/system_certificates.S b/certs/system_certificates.S
index 9216e8c81764..c9ceb71a43fe 100644
--- a/certs/system_certificates.S
+++ b/certs/system_certificates.S
@@ -13,6 +13,19 @@ __cert_list_start:
.incbin "certs/x509_certificate_list"
__cert_list_end:
+#ifdef CONFIG_SYSTEM_EXTRA_CERTIFICATE
+ .globl VMLINUX_SYMBOL(system_extra_cert)
+ .size system_extra_cert, CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE
+VMLINUX_SYMBOL(system_extra_cert):
+ .fill CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE, 1, 0
+
+ .align 4
+ .globl VMLINUX_SYMBOL(system_extra_cert_used)
+VMLINUX_SYMBOL(system_extra_cert_used):
+ .int 0
+
+#endif /* CONFIG_SYSTEM_EXTRA_CERTIFICATE */
+
.align 8
.globl VMLINUX_SYMBOL(system_certificate_list_size)
VMLINUX_SYMBOL(system_certificate_list_size):
diff --git a/certs/system_keyring.c b/certs/system_keyring.c
index 2570598b784d..a7bc8a18ed45 100644
--- a/certs/system_keyring.c
+++ b/certs/system_keyring.c
@@ -36,11 +36,10 @@ static __init int system_trusted_keyring_init(void)
KUIDT_INIT(0), KGIDT_INIT(0), current_cred(),
((KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ | KEY_USR_SEARCH),
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ KEY_ALLOC_NOT_IN_QUOTA,
+ keyring_restrict_trusted_only, NULL);
if (IS_ERR(system_trusted_keyring))
panic("Can't allocate system trusted keyring\n");
-
- set_bit(KEY_FLAG_TRUSTED_ONLY, &system_trusted_keyring->flags);
return 0;
}
@@ -84,12 +83,13 @@ static __init int load_system_certificate_list(void)
((KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ),
KEY_ALLOC_NOT_IN_QUOTA |
- KEY_ALLOC_TRUSTED);
+ KEY_ALLOC_TRUSTED |
+ KEY_ALLOC_BUILT_IN |
+ KEY_ALLOC_BYPASS_RESTRICTION);
if (IS_ERR(key)) {
pr_err("Problem loading in-kernel X.509 certificate (%ld)\n",
PTR_ERR(key));
} else {
- set_bit(KEY_FLAG_BUILTIN, &key_ref_to_ptr(key)->flags);
pr_notice("Loaded X.509 cert '%s'\n",
key_ref_to_ptr(key)->description);
key_ref_put(key);
@@ -108,16 +108,25 @@ late_initcall(load_system_certificate_list);
#ifdef CONFIG_SYSTEM_DATA_VERIFICATION
/**
- * Verify a PKCS#7-based signature on system data.
- * @data: The data to be verified.
+ * verify_pkcs7_signature - Verify a PKCS#7-based signature on system data.
+ * @data: The data to be verified (NULL if expecting internal data).
* @len: Size of @data.
* @raw_pkcs7: The PKCS#7 message that is the signature.
* @pkcs7_len: The size of @raw_pkcs7.
+ * @trusted_keys: Trusted keys to use (NULL for system_trusted_keyring).
* @usage: The use to which the key is being put.
+ * @view_content: Callback to gain access to content.
+ * @ctx: Context for callback.
*/
-int system_verify_data(const void *data, unsigned long len,
- const void *raw_pkcs7, size_t pkcs7_len,
- enum key_being_used_for usage)
+int verify_pkcs7_signature(const void *data, size_t len,
+ const void *raw_pkcs7, size_t pkcs7_len,
+ struct key *trusted_keys,
+ int untrusted_error,
+ enum key_being_used_for usage,
+ int (*view_content)(void *ctx,
+ const void *data, size_t len,
+ size_t asn1hdrlen),
+ void *ctx)
{
struct pkcs7_message *pkcs7;
bool trusted;
@@ -128,7 +137,7 @@ int system_verify_data(const void *data, unsigned long len,
return PTR_ERR(pkcs7);
/* The data should be detached - so we need to supply it. */
- if (pkcs7_supply_detached_data(pkcs7, data, len) < 0) {
+ if (data && pkcs7_supply_detached_data(pkcs7, data, len) < 0) {
pr_err("PKCS#7 signature with non-detached data\n");
ret = -EBADMSG;
goto error;
@@ -138,13 +147,29 @@ int system_verify_data(const void *data, unsigned long len,
if (ret < 0)
goto error;
- ret = pkcs7_validate_trust(pkcs7, system_trusted_keyring, &trusted);
+ if (!trusted_keys)
+ trusted_keys = system_trusted_keyring;
+ ret = pkcs7_validate_trust(pkcs7, trusted_keys, &trusted);
if (ret < 0)
goto error;
- if (!trusted) {
+ if (!trusted && untrusted_error) {
pr_err("PKCS#7 signature not signed with a trusted key\n");
- ret = -ENOKEY;
+ ret = untrusted_error;
+ goto error;
+ }
+
+ if (view_content) {
+ size_t asn1hdrlen;
+
+ ret = pkcs7_get_content_data(pkcs7, &data, &len, &asn1hdrlen);
+ if (ret < 0) {
+ if (ret == -ENODATA)
+ pr_devel("PKCS#7 message does not contain data\n");
+ goto error;
+ }
+
+ ret = view_content(ctx, data, len, asn1hdrlen);
}
error:
@@ -152,6 +177,6 @@ error:
pr_devel("<==%s() = %d\n", __func__, ret);
return ret;
}
-EXPORT_SYMBOL_GPL(system_verify_data);
+EXPORT_SYMBOL_GPL(verify_pkcs7_signature);
#endif /* CONFIG_SYSTEM_DATA_VERIFICATION */
diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
index 05bfe568cd30..8926714c8fe9 100644
--- a/crypto/asymmetric_keys/Kconfig
+++ b/crypto/asymmetric_keys/Kconfig
@@ -48,8 +48,7 @@ config PKCS7_MESSAGE_PARSER
config PKCS7_TEST_KEY
tristate "PKCS#7 testing key type"
- depends on PKCS7_MESSAGE_PARSER
- select SYSTEM_TRUSTED_KEYRING
+ depends on SYSTEM_DATA_VERIFICATION
help
This option provides a type of key that can be loaded up from a
PKCS#7 message - provided the message is signed by a trusted key. If
@@ -62,6 +61,7 @@ config PKCS7_TEST_KEY
config SIGNED_PE_FILE_VERIFICATION
bool "Support for PE file signature verification"
depends on PKCS7_MESSAGE_PARSER=y
+ depends on SYSTEM_DATA_VERIFICATION
select ASN1
select OID_REGISTRY
help
diff --git a/crypto/asymmetric_keys/mscode_parser.c b/crypto/asymmetric_keys/mscode_parser.c
index adcef59eec0b..b2fa9eea3ef6 100644
--- a/crypto/asymmetric_keys/mscode_parser.c
+++ b/crypto/asymmetric_keys/mscode_parser.c
@@ -21,19 +21,13 @@
/*
* Parse a Microsoft Individual Code Signing blob
*/
-int mscode_parse(struct pefile_context *ctx)
+int mscode_parse(void *_ctx, const void *content_data, size_t data_len,
+ size_t asn1hdrlen)
{
- const void *content_data;
- size_t data_len;
- int ret;
-
- ret = pkcs7_get_content_data(ctx->pkcs7, &content_data, &data_len, 1);
-
- if (ret) {
- pr_debug("PKCS#7 message does not contain data\n");
- return ret;
- }
+ struct pefile_context *ctx = _ctx;
+ content_data -= asn1hdrlen;
+ data_len += asn1hdrlen;
pr_devel("Data: %zu [%*ph]\n", data_len, (unsigned)(data_len),
content_data);
@@ -129,7 +123,6 @@ int mscode_note_digest(void *context, size_t hdrlen,
{
struct pefile_context *ctx = context;
- ctx->digest = value;
- ctx->digest_len = vlen;
- return 0;
+ ctx->digest = kmemdup(value, vlen, GFP_KERNEL);
+ return ctx->digest ? 0 : -ENOMEM;
}
diff --git a/crypto/asymmetric_keys/pkcs7_key_type.c b/crypto/asymmetric_keys/pkcs7_key_type.c
index e2d0edbbc71a..ab9bf5363ecd 100644
--- a/crypto/asymmetric_keys/pkcs7_key_type.c
+++ b/crypto/asymmetric_keys/pkcs7_key_type.c
@@ -13,12 +13,9 @@
#include <linux/key.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/verification.h>
#include <linux/key-type.h>
-#include <keys/asymmetric-type.h>
-#include <crypto/pkcs7.h>
#include <keys/user-type.h>
-#include <keys/system_keyring.h>
-#include "pkcs7_parser.h"
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PKCS#7 testing key type");
@@ -29,60 +26,47 @@ MODULE_PARM_DESC(pkcs7_usage,
"Usage to specify when verifying the PKCS#7 message");
/*
- * Preparse a PKCS#7 wrapped and validated data blob.
+ * Retrieve the PKCS#7 message content.
*/
-static int pkcs7_preparse(struct key_preparsed_payload *prep)
+static int pkcs7_view_content(void *ctx, const void *data, size_t len,
+ size_t asn1hdrlen)
{
- enum key_being_used_for usage = pkcs7_usage;
- struct pkcs7_message *pkcs7;
- const void *data, *saved_prep_data;
- size_t datalen, saved_prep_datalen;
- bool trusted;
+ struct key_preparsed_payload *prep = ctx;
+ const void *saved_prep_data;
+ size_t saved_prep_datalen;
int ret;
- kenter("");
-
- if (usage >= NR__KEY_BEING_USED_FOR) {
- pr_err("Invalid usage type %d\n", usage);
- return -EINVAL;
- }
-
saved_prep_data = prep->data;
saved_prep_datalen = prep->datalen;
- pkcs7 = pkcs7_parse_message(saved_prep_data, saved_prep_datalen);
- if (IS_ERR(pkcs7)) {
- ret = PTR_ERR(pkcs7);
- goto error;
- }
-
- ret = pkcs7_verify(pkcs7, usage);
- if (ret < 0)
- goto error_free;
-
- ret = pkcs7_validate_trust(pkcs7, system_trusted_keyring, &trusted);
- if (ret < 0)
- goto error_free;
- if (!trusted)
- pr_warn("PKCS#7 message doesn't chain back to a trusted key\n");
-
- ret = pkcs7_get_content_data(pkcs7, &data, &datalen, false);
- if (ret < 0)
- goto error_free;
-
prep->data = data;
- prep->datalen = datalen;
+ prep->datalen = len;
+
ret = user_preparse(prep);
+
prep->data = saved_prep_data;
prep->datalen = saved_prep_datalen;
-
-error_free:
- pkcs7_free_message(pkcs7);
-error:
- kleave(" = %d", ret);
return ret;
}
/*
+ * Preparse a PKCS#7 wrapped and validated data blob.
+ */
+static int pkcs7_preparse(struct key_preparsed_payload *prep)
+{
+ enum key_being_used_for usage = pkcs7_usage;
+
+ if (usage >= NR__KEY_BEING_USED_FOR) {
+ pr_err("Invalid usage type %d\n", usage);
+ return -EINVAL;
+ }
+
+ return verify_pkcs7_signature(NULL, 0,
+ prep->data, prep->datalen,
+ NULL, -ENOKEY, usage,
+ pkcs7_view_content, prep);
+}
+
+/*
* user defined keys take an arbitrary string as the description and an
* arbitrary blob of data as the payload
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.c b/crypto/asymmetric_keys/pkcs7_parser.c
index 5e5a8adac0ba..188d027377c6 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.c
+++ b/crypto/asymmetric_keys/pkcs7_parser.c
@@ -168,24 +168,25 @@ EXPORT_SYMBOL_GPL(pkcs7_parse_message);
* @pkcs7: The preparsed PKCS#7 message to access
* @_data: Place to return a pointer to the data
* @_data_len: Place to return the data length
- * @want_wrapper: True if the ASN.1 object header should be included in the data
+ * @_headerlen: Size of ASN.1 header not included in _data
*
- * Get access to the data content of the PKCS#7 message, including, optionally,
- * the header of the ASN.1 object that contains it. Returns -ENODATA if the
- * data object was missing from the message.
+ * Get access to the data content of the PKCS#7 message. The size of the
+ * header of the ASN.1 object that contains it is also provided and can be used
+ * to adjust *_data and *_data_len to get the entire object.
+ *
+ * Returns -ENODATA if the data object was missing from the message.
*/
int pkcs7_get_content_data(const struct pkcs7_message *pkcs7,
const void **_data, size_t *_data_len,
- bool want_wrapper)
+ size_t *_headerlen)
{
- size_t wrapper;
-
if (!pkcs7->data)
return -ENODATA;
- wrapper = want_wrapper ? pkcs7->data_hdrlen : 0;
- *_data = pkcs7->data - wrapper;
- *_data_len = pkcs7->data_len + wrapper;
+ *_data = pkcs7->data;
+ *_data_len = pkcs7->data_len;
+ if (_headerlen)
+ *_headerlen = pkcs7->data_hdrlen;
return 0;
}
EXPORT_SYMBOL_GPL(pkcs7_get_content_data);
diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c
index 897b734dabf9..443a00f9cd7a 100644
--- a/crypto/asymmetric_keys/verify_pefile.c
+++ b/crypto/asymmetric_keys/verify_pefile.c
@@ -16,7 +16,7 @@
#include <linux/err.h>
#include <linux/pe.h>
#include <linux/asn1.h>
-#include <crypto/pkcs7.h>
+#include <linux/verification.h>
#include <crypto/hash.h>
#include "verify_pefile.h"
@@ -392,9 +392,8 @@ error_no_desc:
* verify_pefile_signature - Verify the signature on a PE binary image
* @pebuf: Buffer containing the PE binary image
* @pelen: Length of the binary image
- * @trust_keyring: Signing certificates to use as starting points
+ * @trust_keys: Signing certificate(s) to use as starting points
* @usage: The use to which the key is being put.
- * @_trusted: Set to true if trustworth, false otherwise
*
* Validate that the certificate chain inside the PKCS#7 message inside the PE
* binary image intersects keys we already know and trust.
@@ -418,14 +417,10 @@ error_no_desc:
* May also return -ENOMEM.
*/
int verify_pefile_signature(const void *pebuf, unsigned pelen,
- struct key *trusted_keyring,
- enum key_being_used_for usage,
- bool *_trusted)
+ struct key *trusted_keys,
+ enum key_being_used_for usage)
{
- struct pkcs7_message *pkcs7;
struct pefile_context ctx;
- const void *data;
- size_t datalen;
int ret;
kenter("");
@@ -439,19 +434,10 @@ int verify_pefile_signature(const void *pebuf, unsigned pelen,
if (ret < 0)
return ret;
- pkcs7 = pkcs7_parse_message(pebuf + ctx.sig_offset, ctx.sig_len);
- if (IS_ERR(pkcs7))
- return PTR_ERR(pkcs7);
- ctx.pkcs7 = pkcs7;
-
- ret = pkcs7_get_content_data(ctx.pkcs7, &data, &datalen, false);
- if (ret < 0 || datalen == 0) {
- pr_devel("PKCS#7 message does not contain data\n");
- ret = -EBADMSG;
- goto error;
- }
-
- ret = mscode_parse(&ctx);
+ ret = verify_pkcs7_signature(NULL, 0,
+ pebuf + ctx.sig_offset, ctx.sig_len,
+ trusted_keys, -EKEYREJECTED, usage,
+ mscode_parse, &ctx);
if (ret < 0)
goto error;
@@ -462,16 +448,8 @@ int verify_pefile_signature(const void *pebuf, unsigned pelen,
* contents.
*/
ret = pefile_digest_pe(pebuf, pelen, &ctx);
- if (ret < 0)
- goto error;
-
- ret = pkcs7_verify(pkcs7, usage);
- if (ret < 0)
- goto error;
-
- ret = pkcs7_validate_trust(pkcs7, trusted_keyring, _trusted);
error:
- pkcs7_free_message(ctx.pkcs7);
+ kfree(ctx.digest);
return ret;
}
diff --git a/crypto/asymmetric_keys/verify_pefile.h b/crypto/asymmetric_keys/verify_pefile.h
index 55d5f7ebc45a..d6341d5406d4 100644
--- a/crypto/asymmetric_keys/verify_pefile.h
+++ b/crypto/asymmetric_keys/verify_pefile.h
@@ -9,7 +9,6 @@
* 2 of the Licence, or (at your option) any later version.
*/
-#include <linux/verify_pefile.h>
#include <crypto/pkcs7.h>
#include <crypto/hash_info.h>
@@ -23,7 +22,6 @@ struct pefile_context {
unsigned sig_offset;
unsigned sig_len;
const struct section_header *secs;
- struct pkcs7_message *pkcs7;
/* PKCS#7 MS Individual Code Signing content */
const void *digest; /* Digest */
@@ -39,4 +37,5 @@ struct pefile_context {
/*
* mscode_parser.c
*/
-extern int mscode_parse(struct pefile_context *ctx);
+extern int mscode_parse(void *_ctx, const void *content_data, size_t data_len,
+ size_t asn1hdrlen);
diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c
index 2a44b3752471..9e9e5a6a9ed6 100644
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -321,6 +321,8 @@ static int x509_key_preparse(struct key_preparsed_payload *prep)
goto error_free_cert;
} else if (!prep->trusted) {
ret = x509_validate_trust(cert, get_system_trusted_keyring());
+ if (ret)
+ ret = x509_validate_trust(cert, get_ima_mok_keyring());
if (!ret)
prep->trusted = 1;
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2bc741bea8f3..efeaf968dc6f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -24,6 +24,12 @@ config DEVKMEM
kind of kernel debugging operations.
When in doubt, say "N".
+config VF610_SEMA4
+ bool "VF610 SEMA4 driver"
+ depends on SOC_VF610
+ help
+ Support for VF610 SEMA4 driver, most people should say N here.
+
config SGI_SNSC
bool "SGI Altix system controller communication support"
depends on (IA64_SGI_SN2 || IA64_GENERIC)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index d8a7579300d2..fef56bfad9db 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -59,4 +59,5 @@ obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
obj-$(CONFIG_TILE_SROM) += tile-srom.o
+obj-$(CONFIG_VF610_SEMA4) += vf610_sema4.o
obj-$(CONFIG_XILLYBUS) += xillybus/
diff --git a/drivers/char/vf610_sema4.c b/drivers/char/vf610_sema4.c
new file mode 100644
index 000000000000..dff78bd3e22b
--- /dev/null
+++ b/drivers/char/vf610_sema4.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Toradex AG.
+ *
+ * Taken from the 4.1.15 kernel release for i.MX7 by Freescale.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vf610_sema4.h>
+
+static struct vf610_sema4_mutex_device *vf610_sema4;
+
+struct vf610_sema4_mutex *
+vf610_sema4_mutex_create(u32 dev_num, u32 mutex_num)
+{
+ struct vf610_sema4_mutex *mutex_ptr = NULL;
+
+ if (!vf610_sema4)
+ return ERR_PTR(-ENODEV);
+
+ if (mutex_num >= SEMA4_NUM_GATES || dev_num >= SEMA4_NUM_DEVICES)
+ return ERR_PTR(-EINVAL);
+
+ if (vf610_sema4->cpine_val & (1 < mutex_num)) {
+ pr_err("Error: requiring a allocated sema4.\n");
+ pr_err("mutex_num %d cpine_val 0x%08x.\n",
+ mutex_num, vf610_sema4->cpine_val);
+ }
+
+ mutex_ptr = kzalloc(sizeof(*mutex_ptr), GFP_KERNEL);
+ if (!mutex_ptr)
+ return ERR_PTR(-ENOMEM);
+
+ vf610_sema4->mutex_ptr[mutex_num] = mutex_ptr;
+ vf610_sema4->alloced |= 1 < mutex_num;
+ vf610_sema4->cpine_val |= idx_sema4[mutex_num];
+ writew(vf610_sema4->cpine_val, vf610_sema4->ioaddr + SEMA4_CP0INE);
+
+ mutex_ptr->valid = CORE_MUTEX_VALID;
+ mutex_ptr->gate_num = mutex_num;
+ init_waitqueue_head(&mutex_ptr->wait_q);
+
+ return mutex_ptr;
+}
+EXPORT_SYMBOL(vf610_sema4_mutex_create);
+
+int vf610_sema4_mutex_destroy(struct vf610_sema4_mutex *mutex_ptr)
+{
+ u32 mutex_num;
+
+ if ((mutex_ptr == NULL) || (mutex_ptr->valid != CORE_MUTEX_VALID))
+ return -EINVAL;
+
+ mutex_num = mutex_ptr->gate_num;
+ if ((vf610_sema4->cpine_val & idx_sema4[mutex_num]) == 0) {
+ pr_err("Error: trying to destroy a un-allocated sema4.\n");
+ pr_err("mutex_num %d cpine_val 0x%08x.\n",
+ mutex_num, vf610_sema4->cpine_val);
+ }
+ vf610_sema4->mutex_ptr[mutex_num] = NULL;
+ vf610_sema4->alloced &= ~(1 << mutex_num);
+ vf610_sema4->cpine_val &= ~(idx_sema4[mutex_num]);
+ writew(vf610_sema4->cpine_val, vf610_sema4->ioaddr + SEMA4_CP0INE);
+
+ kfree(mutex_ptr);
+
+ return 0;
+}
+EXPORT_SYMBOL(vf610_sema4_mutex_destroy);
+
+int _vf610_sema4_mutex_lock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ int ret = 0, i = 0;
+
+ if ((mutex_ptr == NULL) || (mutex_ptr->valid != CORE_MUTEX_VALID))
+ return -EINVAL;
+
+ i = mutex_ptr->gate_num;
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= SEMA4_GATE_MASK;
+ /* Check to see if this core already own it */
+ if (mutex_ptr->gate_val == SEMA4_A5_LOCK) {
+ /* return -EBUSY, invoker should be in sleep, and re-lock ag */
+ pr_err("%s -> %s %d already locked, wait! num %d val %d.\n",
+ __FILE__, __func__, __LINE__,
+ i, mutex_ptr->gate_val);
+ ret = -EBUSY;
+ goto out;
+ } else {
+ /* try to lock the mutex */
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= (~SEMA4_GATE_MASK);
+ mutex_ptr->gate_val |= SEMA4_A5_LOCK;
+ writeb(mutex_ptr->gate_val, vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= SEMA4_GATE_MASK;
+ /* double check the mutex is locked, otherwise, return -EBUSY */
+ if (mutex_ptr->gate_val != SEMA4_A5_LOCK) {
+ pr_debug("wait-locked num %d val %d.\n",
+ i, mutex_ptr->gate_val);
+ ret = -EBUSY;
+ }
+ }
+out:
+ return ret;
+}
+
+int vf610_sema4_mutex_trylock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ int ret = 0;
+
+ ret = _vf610_sema4_mutex_lock(mutex_ptr);
+ if (ret == 0)
+ return SEMA4_A5_LOCK;
+ else
+ return ret;
+}
+EXPORT_SYMBOL(vf610_sema4_mutex_trylock);
+
+int vf610_sema4_mutex_lock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vf610_sema4->lock, flags);
+ ret = _vf610_sema4_mutex_lock(mutex_ptr);
+ spin_unlock_irqrestore(&vf610_sema4->lock, flags);
+ while (-EBUSY == ret) {
+ spin_lock_irqsave(&vf610_sema4->lock, flags);
+ ret = _vf610_sema4_mutex_lock(mutex_ptr);
+ spin_unlock_irqrestore(&vf610_sema4->lock, flags);
+ if (ret == 0)
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(vf610_sema4_mutex_lock);
+
+int vf610_sema4_mutex_unlock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ int ret = 0, i = 0;
+
+ if ((mutex_ptr == NULL) || (mutex_ptr->valid != CORE_MUTEX_VALID))
+ return -EINVAL;
+
+ i = mutex_ptr->gate_num;
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= SEMA4_GATE_MASK;
+ /* make sure it is locked by this core */
+ if (mutex_ptr->gate_val != SEMA4_A5_LOCK) {
+ pr_err("%d Trying to unlock an unlock mutex.\n", __LINE__);
+ ret = -EINVAL;
+ goto out;
+ }
+ /* unlock it */
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= (~SEMA4_GATE_MASK);
+ writeb(mutex_ptr->gate_val | SEMA4_UNLOCK, vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= SEMA4_GATE_MASK;
+ /* make sure it is locked by this core */
+ if (mutex_ptr->gate_val == SEMA4_A5_LOCK)
+ pr_err("%d ERROR, failed to unlock the mutex.\n", __LINE__);
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL(vf610_sema4_mutex_unlock);
+
+static irqreturn_t vf610_sema4_isr(int irq, void *dev_id)
+{
+ int i;
+ struct vf610_sema4_mutex *mutex_ptr;
+ unsigned int mask;
+ struct vf610_sema4_mutex_device *vf610_sema4 = dev_id;
+
+ vf610_sema4->cpntf_val = readw(vf610_sema4->ioaddr + SEMA4_CP0NTF);
+ for (i = 0; i < SEMA4_NUM_GATES; i++) {
+ mask = idx_sema4[i];
+ if ((vf610_sema4->cpntf_val) & mask) {
+ mutex_ptr = vf610_sema4->mutex_ptr[i];
+ /*
+ * An interrupt is pending on this mutex, the only way
+ * to clear it is to lock it (either by this core or
+ * another).
+ */
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= (~SEMA4_GATE_MASK);
+ mutex_ptr->gate_val |= SEMA4_A5_LOCK;
+ writeb(mutex_ptr->gate_val, vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val = readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= SEMA4_GATE_MASK;
+ if (mutex_ptr->gate_val == SEMA4_A5_LOCK) {
+ /*
+ * wake up the wait queue, whatever there
+ * are wait task or not.
+ * NOTE: check gate is locted or not in
+ * sema4_lock func by wait task.
+ */
+ mutex_ptr->gate_val =
+ readb(vf610_sema4->ioaddr + i);
+ mutex_ptr->gate_val &= (~SEMA4_GATE_MASK);
+ mutex_ptr->gate_val |= SEMA4_UNLOCK;
+
+ writeb(mutex_ptr->gate_val,
+ vf610_sema4->ioaddr + i);
+ wake_up(&mutex_ptr->wait_q);
+ } else {
+ pr_debug("can't lock gate%d %s retry!\n", i,
+ mutex_ptr->gate_val ?
+ "locked by m4" : "");
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id vf610_sema4_dt_ids[] = {
+ { .compatible = "fsl,vf610-sema4", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_sema4_dt_ids);
+
+static int vf610_sema4_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret;
+
+ vf610_sema4 = devm_kzalloc(&pdev->dev, sizeof(*vf610_sema4), GFP_KERNEL);
+ if (!vf610_sema4)
+ return -ENOMEM;
+
+ vf610_sema4->dev = &pdev->dev;
+ vf610_sema4->cpine_val = 0;
+ spin_lock_init(&vf610_sema4->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(res)) {
+ dev_err(&pdev->dev, "unable to get vf610 sema4 resource 0\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ vf610_sema4->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(vf610_sema4->ioaddr)) {
+ ret = PTR_ERR(vf610_sema4->ioaddr);
+ goto err;
+ }
+
+ vf610_sema4->irq = platform_get_irq(pdev, 0);
+ if (!vf610_sema4->irq) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = devm_request_irq(&pdev->dev, vf610_sema4->irq, vf610_sema4_isr,
+ IRQF_SHARED, "vf610-sema4", vf610_sema4);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request vf610 sema4 irq\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, vf610_sema4);
+
+err:
+ return ret;
+}
+
+static int vf610_sema4_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver vf610_sema4_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "vf610-sema4",
+ .of_match_table = vf610_sema4_dt_ids,
+ },
+ .probe = vf610_sema4_probe,
+ .remove = vf610_sema4_remove,
+};
+
+module_platform_driver(vf610_sema4_driver);
+
+MODULE_DESCRIPTION("VF610 SEMA4 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index 8935bff99fe7..db44a198a0d9 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -31,6 +31,7 @@ struct clk_gate2 {
struct clk_hw hw;
void __iomem *reg;
u8 bit_idx;
+ u8 cgr_val;
u8 flags;
spinlock_t *lock;
unsigned int *share_count;
@@ -50,7 +51,8 @@ static int clk_gate2_enable(struct clk_hw *hw)
goto out;
reg = readl(gate->reg);
- reg |= 3 << gate->bit_idx;
+ reg &= ~(3 << gate->bit_idx);
+ reg |= gate->cgr_val << gate->bit_idx;
writel(reg, gate->reg);
out:
@@ -125,7 +127,7 @@ static struct clk_ops clk_gate2_ops = {
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
+ void __iomem *reg, u8 bit_idx, u8 cgr_val,
u8 clk_gate2_flags, spinlock_t *lock,
unsigned int *share_count)
{
@@ -140,6 +142,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
/* struct clk_gate2 assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
+ gate->cgr_val = cgr_val;
gate->flags = clk_gate2_flags;
gate->lock = lock;
gate->share_count = share_count;
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index 2c92a2706fdd..54e8536c6787 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -10,6 +10,7 @@
#include <linux/of_address.h>
#include <linux/clk.h>
+#include <linux/syscore_ops.h>
#include <dt-bindings/clock/vf610-clock.h>
#include "clk.h"
@@ -40,6 +41,7 @@
#define CCM_CCGR9 (ccm_base + 0x64)
#define CCM_CCGR10 (ccm_base + 0x68)
#define CCM_CCGR11 (ccm_base + 0x6c)
+#define CCM_CCGRx(x) (CCM_CCGR0 + (x) * 4)
#define CCM_CMEOR0 (ccm_base + 0x70)
#define CCM_CMEOR1 (ccm_base + 0x74)
#define CCM_CMEOR2 (ccm_base + 0x78)
@@ -115,10 +117,25 @@ static struct clk_div_table pll4_audio_div_table[] = {
static struct clk *clk[VF610_CLK_END];
static struct clk_onecell_data clk_data;
+static u32 anadig_pll3_ctrl;
+static u32 anadig_pll4_ctrl;
+static u32 anadig_pll5_ctrl;
+static u32 anadig_pll6_ctrl;
+static u32 anadig_pll7_ctrl;
+static u32 ccpgr0;
+static u32 cscmr1;
+static u32 cscmr2;
+static u32 cscdr1;
+static u32 cscdr2;
+static u32 cscdr3;
+static u32 ccgr[12];
+
static unsigned int const clks_init_on[] __initconst = {
VF610_CLK_SYS_BUS,
VF610_CLK_DDR_SEL,
VF610_CLK_DAP,
+ VF610_CLK_DDRMC,
+ VF610_CLK_WKPU,
};
static struct clk * __init vf610_get_fixed_clock(
@@ -132,6 +149,57 @@ static struct clk * __init vf610_get_fixed_clock(
return clk;
};
+static int vf610_clk_suspend(void)
+{
+ int i;
+
+ anadig_pll3_ctrl = readl_relaxed(PLL3_CTRL);
+ anadig_pll4_ctrl = readl_relaxed(PLL4_CTRL);
+ anadig_pll5_ctrl = readl_relaxed(PLL5_CTRL);
+ anadig_pll6_ctrl = readl_relaxed(PLL6_CTRL);
+ anadig_pll7_ctrl = readl_relaxed(PLL7_CTRL);
+
+ ccpgr0 = readl_relaxed(CCM_CCPGR0);
+ cscmr1 = readl_relaxed(CCM_CSCMR1);
+ cscmr2 = readl_relaxed(CCM_CSCMR2);
+
+ cscdr1 = readl_relaxed(CCM_CSCDR1);
+ cscdr2 = readl_relaxed(CCM_CSCDR2);
+ cscdr3 = readl_relaxed(CCM_CSCDR3);
+
+ for (i = 0; i < 12; i++)
+ ccgr[i] = readl_relaxed(CCM_CCGRx(i));
+
+ return 0;
+}
+
+static void vf610_clk_resume(void)
+{
+ int i;
+
+ writel_relaxed(anadig_pll3_ctrl, PLL3_CTRL);
+ writel_relaxed(anadig_pll4_ctrl, PLL4_CTRL);
+ writel_relaxed(anadig_pll5_ctrl, PLL5_CTRL);
+ writel_relaxed(anadig_pll6_ctrl, PLL6_CTRL);
+ writel_relaxed(anadig_pll7_ctrl, PLL7_CTRL);
+
+ writel_relaxed(ccpgr0, CCM_CCPGR0);
+ writel_relaxed(cscmr1, CCM_CSCMR1);
+ writel_relaxed(cscmr2, CCM_CSCMR2);
+
+ writel_relaxed(cscdr1, CCM_CSCDR1);
+ writel_relaxed(cscdr2, CCM_CSCDR2);
+ writel_relaxed(cscdr3, CCM_CSCDR3);
+
+ for (i = 0; i < 12; i++)
+ writel_relaxed(ccgr[i], CCM_CCGRx(i));
+}
+
+static struct syscore_ops vf610_clk_syscore_ops = {
+ .suspend = vf610_clk_suspend,
+ .resume = vf610_clk_resume,
+};
+
static void __init vf610_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@@ -234,6 +302,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
+ clk[VF610_CLK_DDRMC] = imx_clk_gate2_cgr("ddrmc", "ddr_sel", CCM_CCGR6, CCM_CCGRx_CGn(14), 0x2);
+ clk[VF610_CLK_WKPU] = imx_clk_gate2_cgr("wkpu", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(10), 0x2);
+
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
@@ -262,15 +333,16 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
+ clk[VF610_CLK_ESW] = imx_clk_gate2("esw", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(8));
clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
- clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7));
- clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8));
- clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9));
- clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10));
- clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9));
- clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10));
+ clk[VF610_CLK_UART0] = imx_clk_gate2_cgr("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7), 0x2);
+ clk[VF610_CLK_UART1] = imx_clk_gate2_cgr("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8), 0x2);
+ clk[VF610_CLK_UART2] = imx_clk_gate2_cgr("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9), 0x2);
+ clk[VF610_CLK_UART3] = imx_clk_gate2_cgr("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10), 0x2);
+ clk[VF610_CLK_UART4] = imx_clk_gate2_cgr("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9), 0x2);
+ clk[VF610_CLK_UART5] = imx_clk_gate2_cgr("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10), 0x2);
clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
@@ -322,11 +394,14 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2);
clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19);
clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3);
- clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "ipg_bus", CCM_CCGR3, CCM_CCGRx_CGn(8));
clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2);
clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23);
clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
- clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(8));
+
+ clk[VF610_CLK_TCON0] = imx_clk_gate2("tcon0", "platform_bus", CCM_CCGR1, CCM_CCGRx_CGn(13));
+ clk[VF610_CLK_TCON1] = imx_clk_gate2("tcon1", "platform_bus", CCM_CCGR7, CCM_CCGRx_CGn(13));
clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
@@ -402,17 +477,21 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2);
clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2);
- clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_PLL4_MAIN_DIV]);
clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]);
- clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_PLL4_MAIN_DIV]);
clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_rate(clk[VF610_CLK_PLL4_MAIN_DIV], 147456000);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
+ register_syscore_ops(&vf610_clk_syscore_ops);
+
/* Add the clocks to provider list */
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init);
+
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index c94ac5c26226..9311755da52f 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -41,7 +41,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
+ void __iomem *reg, u8 bit_idx, u8 cgr_val,
u8 clk_gate_flags, spinlock_t *lock,
unsigned int *share_count);
@@ -55,7 +55,7 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock, NULL);
+ shift, 0x3, 0, &imx_ccm_lock, NULL);
}
static inline struct clk *imx_clk_gate2_shared(const char *name,
@@ -63,7 +63,14 @@ static inline struct clk *imx_clk_gate2_shared(const char *name,
unsigned int *share_count)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock, share_count);
+ shift, 0x3, 0, &imx_ccm_lock, share_count);
+}
+
+static inline struct clk *imx_clk_gate2_cgr(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 cgr_val)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, cgr_val, 0, &imx_ccm_lock, NULL);
}
struct clk *imx_clk_pfd(const char *name, const char *parent_name,
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index a0e6c68536a1..934fe264e58d 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -36,6 +36,7 @@
static void __iomem *clksrc_base;
static void __iomem *clkevt_base;
static unsigned long cycle_per_jiffy;
+static void __iomem *timer_base;
static inline void pit_timer_enable(void)
{
@@ -57,12 +58,17 @@ static u64 notrace pit_read_sched_clock(void)
return ~__raw_readl(clksrc_base + PITCVAL);
}
-static int __init pit_clocksource_init(unsigned long rate)
+static void pit_load_and_start_clocksource(int clksrc_ldval)
{
- /* set the max load value and start the clock source counter */
__raw_writel(0, clksrc_base + PITTCTRL);
- __raw_writel(~0UL, clksrc_base + PITLDVAL);
+ __raw_writel(clksrc_ldval, clksrc_base + PITLDVAL);
__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+}
+
+static int __init pit_clocksource_init(unsigned long rate)
+{
+ /* set the max load value and start the clock source counter */
+ pit_load_and_start_clocksource(~0UL);
sched_clock_register(pit_read_sched_clock, 32, rate);
return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
@@ -118,6 +124,21 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static unsigned int src_ldval;
+
+static void pit_resume(struct clock_event_device *evt)
+{
+ /* Enable the PIT module on resume */
+ __raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+
+ pit_load_and_start_clocksource(src_ldval);
+}
+
+static void pit_suspend(struct clock_event_device *evt)
+{
+ src_ldval = __raw_readl(clksrc_base + PITLDVAL);
+}
+
static struct clock_event_device clockevent_pit = {
.name = "VF pit timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
@@ -125,6 +146,8 @@ static struct clock_event_device clockevent_pit = {
.set_state_periodic = pit_set_periodic,
.set_next_event = pit_set_next_event,
.rating = 300,
+ .resume = pit_resume,
+ .suspend = pit_suspend,
};
static struct irqaction pit_timer_irq = {
@@ -159,7 +182,6 @@ static int __init pit_clockevent_init(unsigned long rate, int irq)
static void __init pit_timer_init(struct device_node *np)
{
struct clk *pit_clk;
- void __iomem *timer_base;
unsigned long clk_rate;
int irq;
diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index c2bb8486d174..4c762a5bc895 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -116,6 +116,10 @@
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
+enum fsl_edma_pm_state {
+ RUNNING = 0,
+ SUSPENDED,
+};
struct fsl_edma_hw_tcd {
__le32 saddr;
@@ -147,6 +151,9 @@ struct fsl_edma_slave_config {
struct fsl_edma_chan {
struct virt_dma_chan vchan;
enum dma_status status;
+ enum fsl_edma_pm_state pm_state;
+ bool idle;
+ u32 slave_id;
struct fsl_edma_engine *edma;
struct fsl_edma_desc *edesc;
struct fsl_edma_slave_config fsc;
@@ -298,6 +305,7 @@ static int fsl_edma_terminate_all(struct dma_chan *chan)
spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
fsl_edma_disable_request(fsl_chan);
fsl_chan->edesc = NULL;
+ fsl_chan->idle = true;
vchan_get_all_descriptors(&fsl_chan->vchan, &head);
spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
@@ -313,6 +321,7 @@ static int fsl_edma_pause(struct dma_chan *chan)
if (fsl_chan->edesc) {
fsl_edma_disable_request(fsl_chan);
fsl_chan->status = DMA_PAUSED;
+ fsl_chan->idle = true;
}
spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
return 0;
@@ -327,6 +336,7 @@ static int fsl_edma_resume(struct dma_chan *chan)
if (fsl_chan->edesc) {
fsl_edma_enable_request(fsl_chan);
fsl_chan->status = DMA_IN_PROGRESS;
+ fsl_chan->idle = false;
}
spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
return 0;
@@ -648,6 +658,7 @@ static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
fsl_edma_enable_request(fsl_chan);
fsl_chan->status = DMA_IN_PROGRESS;
+ fsl_chan->idle = false;
}
static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
@@ -683,6 +694,7 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
vchan_cookie_complete(&fsl_chan->edesc->vdesc);
fsl_chan->edesc = NULL;
fsl_chan->status = DMA_COMPLETE;
+ fsl_chan->idle = true;
} else {
vchan_cyclic_callback(&fsl_chan->edesc->vdesc);
}
@@ -711,6 +723,7 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
edma_writeb(fsl_edma, EDMA_CERR_CERR(ch),
fsl_edma->membase + EDMA_CERR);
fsl_edma->chans[ch].status = DMA_ERROR;
+ fsl_edma->chans[ch].idle = true;
}
}
return IRQ_HANDLED;
@@ -731,6 +744,12 @@ static void fsl_edma_issue_pending(struct dma_chan *chan)
spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ if (unlikely(fsl_chan->pm_state != RUNNING)) {
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+ /* cannot submit due to suspend */
+ return;
+ }
+
if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
fsl_edma_xfer_desc(fsl_chan);
@@ -742,6 +761,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
{
struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
struct dma_chan *chan, *_chan;
+ struct fsl_edma_chan *fsl_chan;
unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR;
if (dma_spec->args_count != 2)
@@ -755,8 +775,10 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
chan = dma_get_slave_channel(chan);
if (chan) {
chan->device->privatecnt++;
- fsl_edma_chan_mux(to_fsl_edma_chan(chan),
- dma_spec->args[1], true);
+ fsl_chan = to_fsl_edma_chan(chan);
+ fsl_chan->slave_id = dma_spec->args[1];
+ fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id,
+ true);
mutex_unlock(&fsl_edma->fsl_edma_mutex);
return chan;
}
@@ -895,7 +917,9 @@ static int fsl_edma_probe(struct platform_device *pdev)
struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i];
fsl_chan->edma = fsl_edma;
-
+ fsl_chan->pm_state = RUNNING;
+ fsl_chan->slave_id = 0;
+ fsl_chan->idle = true;
fsl_chan->vchan.desc_free = fsl_edma_free_desc;
vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
@@ -966,6 +990,60 @@ static int fsl_edma_remove(struct platform_device *pdev)
return 0;
}
+static int fsl_edma_suspend_late(struct device *dev)
+{
+ struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
+ struct fsl_edma_chan *fsl_chan;
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < fsl_edma->n_chans; i++) {
+ fsl_chan = &fsl_edma->chans[i];
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ /* Make sure chan is idle or will force disable. */
+ if (unlikely(!fsl_chan->idle)) {
+ dev_warn(dev, "WARN: There is non-idle channel.");
+ fsl_edma_disable_request(fsl_chan);
+ fsl_edma_chan_mux(fsl_chan, 0, false);
+ }
+
+ fsl_chan->pm_state = SUSPENDED;
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+ }
+
+ return 0;
+}
+
+static int fsl_edma_resume_early(struct device *dev)
+{
+ struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
+ struct fsl_edma_chan *fsl_chan;
+ int i;
+
+ for (i = 0; i < fsl_edma->n_chans; i++) {
+ fsl_chan = &fsl_edma->chans[i];
+ fsl_chan->pm_state = RUNNING;
+ edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i));
+ if (fsl_chan->slave_id != 0)
+ fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true);
+ }
+
+ edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA,
+ fsl_edma->membase + EDMA_CR);
+
+ return 0;
+}
+
+/*
+ * eDMA provides the service to others, so it should be suspend late
+ * and resume early. When eDMA suspend, all of the clients should stop
+ * the DMA data transmission and let the channel idle.
+ */
+static const struct dev_pm_ops fsl_edma_pm_ops = {
+ .suspend_late = fsl_edma_suspend_late,
+ .resume_early = fsl_edma_resume_early,
+};
+
static const struct of_device_id fsl_edma_dt_ids[] = {
{ .compatible = "fsl,vf610-edma", },
{ /* sentinel */ }
@@ -976,6 +1054,7 @@ static struct platform_driver fsl_edma_driver = {
.driver = {
.name = "fsl-edma",
.of_match_table = fsl_edma_dt_ids,
+ .pm = &fsl_edma_pm_ops,
},
.probe = fsl_edma_probe,
.remove = fsl_edma_remove,
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index db95c4b99a74..90fd4bee4821 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -36,7 +36,10 @@ struct vf610_gpio_port {
void __iomem *base;
void __iomem *gpio_base;
u8 irqc[VF610_GPIO_PER_PORT];
+ struct platform_device *pdev_wkpu;
+ s8 fsl_wakeup[VF610_GPIO_PER_PORT];
int irq;
+ u32 state;
};
#define GPIO_PDOR 0x00
@@ -60,6 +63,14 @@ struct vf610_gpio_port {
#define PORT_INT_EITHER_EDGE 0xb
#define PORT_INT_LOGIC_ONE 0xc
+#define WKPU_WISR 0x14
+#define WKPU_IRER 0x18
+#define WKPU_WRER 0x1c
+#define WKPU_WIREER 0x28
+#define WKPU_WIFEER 0x2c
+#define WKPU_WIFER 0x30
+#define WKPU_WIPUER 0x34
+
static struct irq_chip vf610_gpio_irq_chip;
static struct vf610_gpio_port *to_vf610_gp(struct gpio_chip *gc)
@@ -72,6 +83,11 @@ static const struct of_device_id vf610_gpio_dt_ids[] = {
{ /* sentinel */ }
};
+static const struct of_device_id vf610_wkpu_dt_ids[] = {
+ { .compatible = "fsl,vf610-wkpu" },
+ { /* sentinel */ }
+};
+
static inline void vf610_gpio_writel(u32 val, void __iomem *reg)
{
writel_relaxed(val, reg);
@@ -147,8 +163,26 @@ static int vf610_gpio_irq_set_type(struct irq_data *d, u32 type)
{
struct vf610_gpio_port *port =
to_vf610_gp(irq_data_get_irq_chip_data(d));
+ s8 wkpu_gpio = port->fsl_wakeup[d->hwirq];
u8 irqc;
+ if (wkpu_gpio >= 0) {
+ void __iomem *base = platform_get_drvdata(port->pdev_wkpu);
+ u32 wireer, wifeer;
+ u32 mask = 1 << wkpu_gpio;
+
+ wireer = vf610_gpio_readl(base + WKPU_WIREER) & ~mask;
+ wifeer = vf610_gpio_readl(base + WKPU_WIFEER) & ~mask;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ wireer |= mask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ wifeer |= mask;
+
+ vf610_gpio_writel(wireer, base + WKPU_WIREER);
+ vf610_gpio_writel(wifeer, base + WKPU_WIFEER);
+ }
+
switch (type) {
case IRQ_TYPE_EDGE_RISING:
irqc = PORT_INT_RISING_EDGE;
@@ -202,6 +236,29 @@ static int vf610_gpio_irq_set_wake(struct irq_data *d, u32 enable)
{
struct vf610_gpio_port *port =
to_vf610_gp(irq_data_get_irq_chip_data(d));
+ s8 wkpu_gpio = port->fsl_wakeup[d->hwirq];
+
+ if (wkpu_gpio >= 0) {
+ void __iomem *base = NULL;
+ u32 wrer, irer;
+
+ base = platform_get_drvdata(port->pdev_wkpu);
+
+ /* WKPU wakeup flag for LPSTOPx modes... */
+ wrer = vf610_gpio_readl(base + WKPU_WRER);
+ irer = vf610_gpio_readl(base + WKPU_IRER);
+
+ if (enable) {
+ wrer |= 1 << wkpu_gpio;
+ irer |= 1 << wkpu_gpio;
+ } else {
+ wrer &= ~(1 << wkpu_gpio);
+ irer &= ~(1 << wkpu_gpio);
+ }
+
+ vf610_gpio_writel(wrer, base + WKPU_WRER);
+ vf610_gpio_writel(irer, base + WKPU_IRER);
+ }
if (enable)
enable_irq_wake(port->irq);
@@ -220,6 +277,77 @@ static struct irq_chip vf610_gpio_irq_chip = {
.irq_set_wake = vf610_gpio_irq_set_wake,
};
+static int __maybe_unused vf610_gpio_suspend(struct device *dev)
+{
+ struct vf610_gpio_port *port = dev_get_drvdata(dev);
+
+ port->state = vf610_gpio_readl(port->gpio_base + GPIO_PDOR);
+
+ /*
+ * There is no need to store Port state since we maintain the state
+ * alread in the irqc array
+ */
+
+ return 0;
+}
+
+static int __maybe_unused vf610_gpio_resume(struct device *dev)
+{
+ struct vf610_gpio_port *port = dev_get_drvdata(dev);
+ int i;
+
+ vf610_gpio_writel(port->state, port->gpio_base + GPIO_PDOR);
+
+ for (i = 0; i < port->gc.ngpio; i++) {
+ u32 irqc = port->irqc[i] << PORT_PCR_IRQC_OFFSET;
+
+ vf610_gpio_writel(irqc, port->base + PORT_PCR(i));
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops vf610_gpio_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(vf610_gpio_suspend, vf610_gpio_resume)
+};
+
+static int vf610_gpio_wkpu(struct device_node *np, struct vf610_gpio_port *port)
+{
+ struct platform_device *pdev = NULL;
+ struct of_phandle_args arg;
+ int i, ret;
+
+ for (i = 0; i < VF610_GPIO_PER_PORT; i++)
+ port->fsl_wakeup[i] = -1;
+
+ for (i = 0;;i++) {
+ int gpioid, wakeupid, cnt;
+
+ ret = of_parse_phandle_with_fixed_args(np, "fsl,gpio-wakeup",
+ 3, i, &arg);
+
+ if (ret == -ENOENT)
+ break;
+
+ if (!pdev)
+ pdev = of_find_device_by_node(arg.np);
+ of_node_put(arg.np);
+ if (!pdev)
+ return -EPROBE_DEFER;
+
+ gpioid = arg.args[0];
+ wakeupid = arg.args[1];
+ cnt = arg.args[2];
+
+ while (cnt-- && gpioid < VF610_GPIO_PER_PORT)
+ port->fsl_wakeup[gpioid++] = wakeupid++;
+ }
+
+ port->pdev_wkpu = pdev;
+
+ return 0;
+}
+
static int vf610_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -248,6 +376,10 @@ static int vf610_gpio_probe(struct platform_device *pdev)
if (port->irq < 0)
return port->irq;
+ ret = vf610_gpio_wkpu(np, port);
+ if (ret < 0)
+ return ret;
+
gc = &port->gc;
gc->of_node = np;
gc->dev = dev;
@@ -282,6 +414,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
}
gpiochip_set_chained_irqchip(gc, &vf610_gpio_irq_chip, port->irq,
vf610_gpio_irq_handler);
+ platform_set_drvdata(pdev, port);
return 0;
}
@@ -289,6 +422,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
static struct platform_driver vf610_gpio_driver = {
.driver = {
.name = "gpio-vf610",
+ .pm = &vf610_gpio_pm_ops,
.of_match_table = vf610_gpio_dt_ids,
},
.probe = vf610_gpio_probe,
@@ -300,6 +434,60 @@ static int __init gpio_vf610_init(void)
}
device_initcall(gpio_vf610_init);
+static irqreturn_t vf610_wkpu_irq(int irq, void *data)
+{
+ void __iomem *base = data;
+ u32 wisr;
+
+ wisr = vf610_gpio_readl(base + WKPU_WISR);
+ vf610_gpio_writel(wisr, base + WKPU_WISR);
+ pr_debug("%s, WKPU interrupt received, flags %08x\n", __func__, wisr);
+
+ return 0;
+}
+
+static int vf610_wkpu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *iores;
+ void __iomem *base;
+ int irq, err;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, iores);
+
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ err = devm_request_irq(dev, irq, vf610_wkpu_irq, 0, "wkpu-vf610", base);
+ if (err) {
+ dev_err(dev, "Error requesting IRQ!\n");
+ return err;
+ }
+
+ platform_set_drvdata(pdev, base);
+
+ return 0;
+}
+
+static struct platform_driver vf610_wkpu_driver = {
+ .driver = {
+ .name = "wkpu-vf610",
+ .of_match_table = vf610_wkpu_dt_ids,
+ },
+ .probe = vf610_wkpu_probe,
+};
+
+static int __init vf610_wkpu_init(void)
+{
+ return platform_driver_register(&vf610_wkpu_driver);
+}
+device_initcall(vf610_wkpu_init);
+
MODULE_AUTHOR("Stefan Agner <stefan@agner.ch>");
MODULE_DESCRIPTION("Freescale VF610 GPIO");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 355ad1b97df6..f256bae67aab 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1194,12 +1194,7 @@ void drm_atomic_legacy_backoff(struct drm_atomic_state *state)
retry:
drm_modeset_backoff(state->acquire_ctx);
- ret = drm_modeset_lock(&state->dev->mode_config.connection_mutex,
- state->acquire_ctx);
- if (ret)
- goto retry;
- ret = drm_modeset_lock_all_crtcs(state->dev,
- state->acquire_ctx);
+ ret = drm_modeset_lock_all_ctx(state->dev, state->acquire_ctx);
if (ret)
goto retry;
}
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index ea443fafb934..ad06c20ea07d 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1814,6 +1814,161 @@ commit:
}
/**
+ * drm_atomic_helper_disable_all - disable all currently active outputs
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * Loops through all connectors, finding those that aren't turned off and then
+ * turns them off by setting their DPMS mode to OFF and deactivating the CRTC
+ * that they are connected to.
+ *
+ * This is used for example in suspend/resume to disable all currently active
+ * functions when suspending.
+ *
+ * Note that if callers haven't already acquired all modeset locks this might
+ * return -EDEADLK, which must be handled by calling drm_modeset_backoff().
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
+ */
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ struct drm_atomic_state *state;
+ struct drm_connector *conn;
+ int err;
+
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return -ENOMEM;
+
+ state->acquire_ctx = ctx;
+
+ drm_for_each_connector(conn, dev) {
+ struct drm_crtc *crtc = conn->state->crtc;
+ struct drm_crtc_state *crtc_state;
+
+ if (!crtc || conn->dpms != DRM_MODE_DPMS_ON)
+ continue;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state)) {
+ err = PTR_ERR(crtc_state);
+ goto free;
+ }
+
+ crtc_state->active = false;
+ }
+
+ err = drm_atomic_commit(state);
+
+free:
+ if (err < 0)
+ drm_atomic_state_free(state);
+
+ return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_disable_all);
+
+/**
+ * drm_atomic_helper_suspend - subsystem-level suspend helper
+ * @dev: DRM device
+ *
+ * Duplicates the current atomic state, disables all active outputs and then
+ * returns a pointer to the original atomic state to the caller. Drivers can
+ * pass this pointer to the drm_atomic_helper_resume() helper upon resume to
+ * restore the output configuration that was active at the time the system
+ * entered suspend.
+ *
+ * Note that it is potentially unsafe to use this. The atomic state object
+ * returned by this function is assumed to be persistent. Drivers must ensure
+ * that this holds true. Before calling this function, drivers must make sure
+ * to suspend fbdev emulation so that nothing can be using the device.
+ *
+ * Returns:
+ * A pointer to a copy of the state before suspend on success or an ERR_PTR()-
+ * encoded error code on failure. Drivers should store the returned atomic
+ * state object and pass it to the drm_atomic_helper_resume() helper upon
+ * resume.
+ *
+ * See also:
+ * drm_atomic_helper_duplicate_state(), drm_atomic_helper_disable_all(),
+ * drm_atomic_helper_resume()
+ */
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev)
+{
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_atomic_state *state;
+ int err;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+retry:
+ err = drm_modeset_lock_all_ctx(dev, &ctx);
+ if (err < 0) {
+ state = ERR_PTR(err);
+ goto unlock;
+ }
+
+ state = drm_atomic_helper_duplicate_state(dev, &ctx);
+ if (IS_ERR(state))
+ goto unlock;
+
+ err = drm_atomic_helper_disable_all(dev, &ctx);
+ if (err < 0) {
+ drm_atomic_state_free(state);
+ state = ERR_PTR(err);
+ goto unlock;
+ }
+
+unlock:
+ if (PTR_ERR(state) == -EDEADLK) {
+ drm_modeset_backoff(&ctx);
+ goto retry;
+ }
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+ return state;
+}
+EXPORT_SYMBOL(drm_atomic_helper_suspend);
+
+/**
+ * drm_atomic_helper_resume - subsystem-level resume helper
+ * @dev: DRM device
+ * @state: atomic state to resume to
+ *
+ * Calls drm_mode_config_reset() to synchronize hardware and software states,
+ * grabs all modeset locks and commits the atomic state object. This can be
+ * used in conjunction with the drm_atomic_helper_suspend() helper to
+ * implement suspend/resume for drivers that support atomic mode-setting.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend()
+ */
+int drm_atomic_helper_resume(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_mode_config *config = &dev->mode_config;
+ int err;
+
+ drm_mode_config_reset(dev);
+ drm_modeset_lock_all(dev);
+ state->acquire_ctx = config->acquire_ctx;
+ err = drm_atomic_commit(state);
+ drm_modeset_unlock_all(dev);
+
+ return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_resume);
+
+/**
* drm_atomic_helper_crtc_set_property - helper for crtc properties
* @crtc: DRM crtc
* @property: DRM property
@@ -2426,7 +2581,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
* @ctx: lock acquisition context
*
* Makes a copy of the current atomic state by looping over all objects and
- * duplicating their respective states.
+ * duplicating their respective states. This is used for example by suspend/
+ * resume support code to save the state prior to suspend such that it can
+ * be restored upon resume.
*
* Note that this treats atomic state as persistent between save and restore.
* Drivers must make sure that this is possible and won't result in confusion
@@ -2438,6 +2595,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
* Returns:
* A pointer to the copy of the atomic state object on success or an
* ERR_PTR()-encoded error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
*/
struct drm_atomic_state *
drm_atomic_helper_duplicate_state(struct drm_device *dev,
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index ef534758a02c..08620a25fe06 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -855,6 +855,12 @@ EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
* due to slight differences in allocating shared resources when the
* configuration is restored in a different order than when userspace set it up)
* need to use their own restore logic.
+ *
+ * This function is deprecated. New drivers should implement atomic mode-
+ * setting and use the atomic suspend/resume helpers.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
*/
void drm_helper_resume_force_mode(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index c19a62561183..a17d74474f1a 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -348,9 +348,6 @@ struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev,
}
- /* disable all the possible outputs/crtcs before entering KMS mode */
- drm_helper_disable_unused_functions(dev);
-
ret = drm_fb_helper_initial_config(helper, preferred_bpp);
if (ret < 0) {
dev_err(dev->dev, "Failed to set initial hw configuration.\n");
@@ -369,6 +366,18 @@ err_free:
EXPORT_SYMBOL_GPL(drm_fbdev_cma_init);
/**
+ * drm_fbdev_cma_get_helper() - Get drm_fb_helper struct of a CMA framebuffer
+ * @fbdev_cma: drm_fbdev_cma struct
+ *
+ * Returns the assigned drm_fb_helper struct.
+ */
+struct drm_fb_helper *drm_fbdev_cma_get_helper(struct drm_fbdev_cma *fbdev_cma)
+{
+ return &fbdev_cma->fb_helper;
+}
+EXPORT_SYMBOL_GPL(drm_fbdev_cma_get_helper);
+
+/**
* drm_fbdev_cma_fini() - Free drm_fbdev_cma struct
* @fbdev_cma: The drm_fbdev_cma struct
*/
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index c257de351cfa..220eee1c1ef7 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -57,11 +57,18 @@
/**
* drm_modeset_lock_all - take all modeset locks
- * @dev: drm device
+ * @dev: DRM device
*
* This function takes all modeset locks, suitable where a more fine-grained
- * scheme isn't (yet) implemented. Locks must be dropped with
- * drm_modeset_unlock_all.
+ * scheme isn't (yet) implemented. Locks must be dropped by calling the
+ * drm_modeset_unlock_all() function.
+ *
+ * This function is deprecated. It allocates a lock acquisition context and
+ * stores it in the DRM device's ->mode_config. This facilitate conversion of
+ * existing code because it removes the need to manually deal with the
+ * acquisition context, but it is also brittle because the context is global
+ * and care must be taken not to nest calls. New code should use the
+ * drm_modeset_lock_all_ctx() function and pass in the context explicitly.
*/
void drm_modeset_lock_all(struct drm_device *dev)
{
@@ -78,39 +85,43 @@ void drm_modeset_lock_all(struct drm_device *dev)
drm_modeset_acquire_init(ctx, 0);
retry:
- ret = drm_modeset_lock(&config->connection_mutex, ctx);
- if (ret)
- goto fail;
- ret = drm_modeset_lock_all_crtcs(dev, ctx);
- if (ret)
- goto fail;
+ ret = drm_modeset_lock_all_ctx(dev, ctx);
+ if (ret < 0) {
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(ctx);
+ goto retry;
+ }
+
+ drm_modeset_acquire_fini(ctx);
+ kfree(ctx);
+ return;
+ }
WARN_ON(config->acquire_ctx);
- /* now we hold the locks, so now that it is safe, stash the
- * ctx for drm_modeset_unlock_all():
+ /*
+ * We hold the locks now, so it is safe to stash the acquisition
+ * context for drm_modeset_unlock_all().
*/
config->acquire_ctx = ctx;
drm_warn_on_modeset_not_all_locked(dev);
-
- return;
-
-fail:
- if (ret == -EDEADLK) {
- drm_modeset_backoff(ctx);
- goto retry;
- }
-
- kfree(ctx);
}
EXPORT_SYMBOL(drm_modeset_lock_all);
/**
* drm_modeset_unlock_all - drop all modeset locks
- * @dev: device
+ * @dev: DRM device
*
- * This function drop all modeset locks taken by drm_modeset_lock_all.
+ * This function drops all modeset locks taken by a previous call to the
+ * drm_modeset_lock_all() function.
+ *
+ * This function is deprecated. It uses the lock acquisition context stored
+ * in the DRM device's ->mode_config. This facilitates conversion of existing
+ * code because it removes the need to manually deal with the acquisition
+ * context, but it is also brittle because the context is global and care must
+ * be taken not to nest calls. New code should pass the acquisition context
+ * directly to the drm_modeset_drop_locks() function.
*/
void drm_modeset_unlock_all(struct drm_device *dev)
{
@@ -431,14 +442,34 @@ void drm_modeset_unlock(struct drm_modeset_lock *lock)
}
EXPORT_SYMBOL(drm_modeset_unlock);
-/* In some legacy codepaths it's convenient to just grab all the crtc and plane
- * related locks. */
-int drm_modeset_lock_all_crtcs(struct drm_device *dev,
- struct drm_modeset_acquire_ctx *ctx)
+/**
+ * drm_modeset_lock_all_ctx - take all modeset locks
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * This function takes all modeset locks, suitable where a more fine-grained
+ * scheme isn't (yet) implemented.
+ *
+ * Unlike drm_modeset_lock_all(), it doesn't take the dev->mode_config.mutex
+ * since that lock isn't required for modeset state changes. Callers which
+ * need to grab that lock too need to do so outside of the acquire context
+ * @ctx.
+ *
+ * Locks acquired with this function should be released by calling the
+ * drm_modeset_drop_locks() function on @ctx.
+ *
+ * Returns: 0 on success or a negative error-code on failure.
+ */
+int drm_modeset_lock_all_ctx(struct drm_device *dev,
+ struct drm_modeset_acquire_ctx *ctx)
{
struct drm_crtc *crtc;
struct drm_plane *plane;
- int ret = 0;
+ int ret;
+
+ ret = drm_modeset_lock(&dev->mode_config.connection_mutex, ctx);
+ if (ret)
+ return ret;
drm_for_each_crtc(crtc, dev) {
ret = drm_modeset_lock(&crtc->mutex, ctx);
@@ -454,4 +485,4 @@ int drm_modeset_lock_all_crtcs(struct drm_device *dev,
return 0;
}
-EXPORT_SYMBOL(drm_modeset_lock_all_crtcs);
+EXPORT_SYMBOL(drm_modeset_lock_all_ctx);
diff --git a/drivers/gpu/drm/fsl-dcu/Makefile b/drivers/gpu/drm/fsl-dcu/Makefile
index 6ea1523ae6ec..b35a292287f3 100644
--- a/drivers/gpu/drm/fsl-dcu/Makefile
+++ b/drivers/gpu/drm/fsl-dcu/Makefile
@@ -3,5 +3,6 @@ fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
fsl_dcu_drm_rgb.o \
fsl_dcu_drm_plane.o \
fsl_dcu_drm_crtc.o \
- fsl_dcu_drm_fbdev.o
+ fsl_dcu_drm_fbdev.o \
+ fsl_tcon.o
obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index 82a3d311e164..9ceeb1a5b47d 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -17,6 +17,9 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_flip_work.h>
+
+#include <video/display_timing.h>
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
@@ -25,11 +28,24 @@
static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
+ struct fsl_dcu_drm_crtc *dcu_crtc = to_fsl_dcu_crtc(crtc);
+ if (crtc->state->event) {
+ crtc->state->event->pipe = drm_crtc_index(crtc);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+ dcu_crtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+ }
}
static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
+ struct fsl_dcu_drm_crtc *dcu_crtc = to_fsl_dcu_crtc(crtc);
+
+ if (dcu_crtc->event != NULL && state->event != NULL)
+ return -EINVAL;
+
return 0;
}
@@ -38,38 +54,99 @@ static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc,
{
}
+void fsl_dcu_crtc_finish_page_flip(struct drm_device *dev)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ struct fsl_dcu_drm_crtc *dcu_crtc = &fsl_dev->crtc;
+ struct drm_crtc *crtc = &dcu_crtc->base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&crtc->dev->event_lock, flags);
+ if (dcu_crtc->event) {
+ drm_send_vblank_event(crtc->dev,
+ drm_crtc_index(crtc),
+ dcu_crtc->event);
+ drm_vblank_put(dev, drm_crtc_index(crtc));
+ dcu_crtc->event = NULL;
+ }
+ spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+}
+
+void fsl_dcu_crtc_cancel_page_flip(struct drm_device *dev, struct drm_file *f)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ struct fsl_dcu_drm_crtc *dcu_crtc = &fsl_dev->crtc;
+ struct drm_crtc *crtc = &dcu_crtc->base;
+ struct drm_pending_vblank_event *event;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = dcu_crtc->event;
+
+ if (event && event->base.file_priv == f) {
+ event->base.destroy(&event->base);
+ drm_vblank_put(dev, drm_crtc_index(crtc));
+ dcu_crtc->event = NULL;
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
- int ret;
-
- ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
- DCU_MODE_DCU_MODE_MASK,
- DCU_MODE_DCU_MODE(DCU_MODE_OFF));
- if (ret)
- dev_err(fsl_dev->dev, "Disable CRTC failed\n");
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- dev_err(fsl_dev->dev, "Enable CRTC failed\n");
+ int i;
+ unsigned int value;
+ unsigned int mode;
+
+ /* Disable automatic transfer mode */
+ regmap_update_bits(fsl_dev->regmap, DCU_UPDATE_MODE,
+ DCU_UPDATE_MODE_MODE, 0);
+
+ /* Disable all planes */
+ for (i = 0; i < fsl_dev->soc->total_layer; i++) {
+ regmap_read(fsl_dev->regmap, DCU_CTRLDESCLN(i, 4), &value);
+ value &= ~DCU_LAYER_EN;
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, 4), value);
+ }
+ regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
+ DCU_UPDATE_MODE_READREG);
+ while (!regmap_read(fsl_dev->regmap, DCU_UPDATE_MODE, &mode) &&
+ mode & DCU_UPDATE_MODE_READREG);
+
+ regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
+ DCU_MODE_DCU_MODE_MASK,
+ DCU_MODE_DCU_MODE(DCU_MODE_OFF));
+ regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
+ DCU_UPDATE_MODE_READREG);
+ clk_disable_unprepare(fsl_dev->pix_clk);
}
static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
- int ret;
-
- ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
- DCU_MODE_DCU_MODE_MASK,
- DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
- if (ret)
- dev_err(fsl_dev->dev, "Enable CRTC failed\n");
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- dev_err(fsl_dev->dev, "Enable CRTC failed\n");
+ unsigned int mode;
+
+ if (clk_prepare_enable(fsl_dev->pix_clk) < 0)
+ dev_err(fsl_dev->dev, "failed to enable pix clk\n");
+
+ regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
+ DCU_MODE_DCU_MODE_MASK,
+ DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
+ regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
+ DCU_UPDATE_MODE_READREG);
+
+ /*
+ * Wait until transfer is complete and switch to automatic update
+ * mode. Automatic updates avoids flickers when changing layer
+ * parameters.
+ */
+ while (!regmap_read(fsl_dev->regmap, DCU_UPDATE_MODE, &mode) &&
+ mode & DCU_UPDATE_MODE_READREG);
+ regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
+ DCU_UPDATE_MODE_MODE);
+ regmap_read(fsl_dev->regmap, DCU_UPDATE_MODE, &mode);
}
static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc,
@@ -83,14 +160,12 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ struct drm_connector *con = &fsl_dev->connector.base;
struct drm_display_mode *mode = &crtc->state->mode;
- unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index;
- unsigned long dcuclk;
- int ret;
+ unsigned int hbp, hfp, hsw, vbp, vfp, vsw, index, pol = 0;
index = drm_crtc_index(crtc);
- dcuclk = clk_get_rate(fsl_dev->clk);
- div = dcuclk / mode->clock / 1000;
+ clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
/* Configure timings: */
hbp = mode->htotal - mode->hsync_end;
@@ -100,51 +175,37 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
- ret = regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
- DCU_HSYN_PARA_BP(hbp) |
- DCU_HSYN_PARA_PW(hsw) |
- DCU_HSYN_PARA_FP(hfp));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
- DCU_VSYN_PARA_BP(vbp) |
- DCU_VSYN_PARA_PW(vsw) |
- DCU_VSYN_PARA_FP(vfp));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
- DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
- DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_SYN_POL,
- DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
- DCU_BGND_G(0) | DCU_BGND_B(0));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
- DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
- DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
- DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
- DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- goto set_failed;
+ /* INV_PXCK as default (most display sample data on rising edge) */
+ if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
+ pol |= DCU_SYN_POL_INV_PXCK;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= DCU_SYN_POL_INV_HS_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= DCU_SYN_POL_INV_VS_LOW;
+
+ regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
+ DCU_HSYN_PARA_BP(hbp) |
+ DCU_HSYN_PARA_PW(hsw) |
+ DCU_HSYN_PARA_FP(hfp));
+ regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
+ DCU_VSYN_PARA_BP(vbp) |
+ DCU_VSYN_PARA_PW(vsw) |
+ DCU_VSYN_PARA_FP(vfp));
+ regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
+ DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
+ DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
+ regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
+ regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
+ DCU_BGND_G(0) | DCU_BGND_B(0));
+ regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
+ DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
+ regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
+ DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
+ DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
+ DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
return;
-set_failed:
- dev_err(dev->dev, "set DCU register failed\n");
}
static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = {
@@ -168,43 +229,24 @@ static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
{
- struct drm_plane *primary;
- struct drm_crtc *crtc = &fsl_dev->crtc;
- unsigned int i, j, reg_num;
+ struct drm_plane *primary, *cursor;
+ struct fsl_dcu_drm_crtc *crtc = &fsl_dev->crtc;
int ret;
- primary = fsl_dcu_drm_primary_create_plane(fsl_dev->drm);
- ret = drm_crtc_init_with_planes(fsl_dev->drm, crtc, primary, NULL,
- &fsl_dcu_drm_crtc_funcs);
- if (ret < 0)
+ fsl_dcu_drm_init_planes(fsl_dev->drm);
+
+ ret = fsl_dcu_drm_create_planes(fsl_dev->drm, &primary, &cursor);
+ if (ret)
return ret;
- drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
-
- if (!strcmp(fsl_dev->soc->name, "ls1021a"))
- reg_num = LS1021A_LAYER_REG_NUM;
- else
- reg_num = VF610_LAYER_REG_NUM;
- for (i = 0; i <= fsl_dev->soc->total_layer; i++) {
- for (j = 0; j < reg_num; j++) {
- ret = regmap_write(fsl_dev->regmap,
- DCU_CTRLDESCLN(i, j), 0);
- if (ret)
- goto init_failed;
- }
+ ret = drm_crtc_init_with_planes(fsl_dev->drm, &crtc->base, primary,
+ cursor, &fsl_dcu_drm_crtc_funcs);
+ if (ret) {
+ primary->funcs->destroy(primary);
+ return ret;
}
- ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
- DCU_MODE_DCU_MODE_MASK,
- DCU_MODE_DCU_MODE(DCU_MODE_OFF));
- if (ret)
- goto init_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- goto init_failed;
+
+ drm_crtc_helper_add(&crtc->base, &fsl_dcu_drm_crtc_helper_funcs);
return 0;
-init_failed:
- dev_err(fsl_dev->dev, "init DCU register failed\n");
- return ret;
}
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
index 43d4da2c5fe5..23a33023d324 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
@@ -14,6 +14,19 @@
struct fsl_dcu_drm_device;
+struct fsl_dcu_drm_crtc {
+ struct drm_crtc base;
+ struct drm_pending_vblank_event *event;
+};
+
+static inline struct fsl_dcu_drm_crtc *to_fsl_dcu_crtc(struct drm_crtc *crtc)
+{
+ return crtc ? container_of(crtc, struct fsl_dcu_drm_crtc, base)
+ : NULL;
+}
+
int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev);
+void fsl_dcu_crtc_finish_page_flip(struct drm_device *dev);
+void fsl_dcu_crtc_cancel_page_flip(struct drm_device *dev, struct drm_file *f);
#endif /* __FSL_DCU_DRM_CRTC_H__ */
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 1930234ba5f1..f4e318d62d22 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -22,47 +22,58 @@
#include <linux/regmap.h>
#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_flip_work.h>
+#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
+#include "fsl_tcon.h"
+
+static int legacyfb_depth = 24;
+module_param(legacyfb_depth, int, 0444);
+
+static bool fsl_dcu_drm_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ if (reg == DCU_INT_STATUS || reg == DCU_UPDATE_MODE)
+ return true;
+
+ return false;
+}
static const struct regmap_config fsl_dcu_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .cache_type = REGCACHE_RBTREE,
+
+ .volatile_reg = fsl_dcu_drm_is_volatile_reg,
};
static int fsl_dcu_drm_irq_init(struct drm_device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
- unsigned int value;
int ret;
ret = drm_irq_install(dev, fsl_dev->irq);
if (ret < 0)
dev_err(dev->dev, "failed to install IRQ handler\n");
- ret = regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_STATUS failed\n");
- ret = regmap_read(fsl_dev->regmap, DCU_INT_MASK, &value);
- if (ret)
- dev_err(dev->dev, "read DCU_INT_MASK failed\n");
- value &= DCU_INT_MASK_VBLANK;
- ret = regmap_write(fsl_dev->regmap, DCU_INT_MASK, value);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_MASK failed\n");
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- dev_err(dev->dev, "set DCU_UPDATE_MODE failed\n");
+ regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0);
+ regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0);
return ret;
}
+static void fsl_dcu_unref_worker(struct drm_flip_work *work, void *val)
+{
+ struct drm_atomic_state *state = val;
+ struct drm_device *dev = state->dev;
+
+ fsl_dcu_cleanup_atomic_state(dev, state);
+}
+
static int fsl_dcu_load(struct drm_device *drm, unsigned long flags)
{
struct device *dev = drm->dev;
@@ -82,12 +93,25 @@ static int fsl_dcu_load(struct drm_device *drm, unsigned long flags)
}
drm->vblank_disable_allowed = true;
+ drm_flip_work_init(&fsl_dev->unref_work, "unref", fsl_dcu_unref_worker);
+ fsl_dev->unref_wq = alloc_ordered_workqueue("fsl-dcu-drm", 0);
+
ret = fsl_dcu_drm_irq_init(drm);
if (ret < 0)
goto done;
drm->irq_enabled = true;
- fsl_dcu_fbdev_init(drm);
+ if (legacyfb_depth != 16 && legacyfb_depth != 24 &&
+ legacyfb_depth != 32) {
+ dev_warn(dev, "Invalid legacyfb_depth. Defaulting to 24bpp\n");
+ legacyfb_depth = 24;
+ }
+ fsl_dev->fbdev = drm_fbdev_cma_init(drm, legacyfb_depth, 1, 1);
+ if (IS_ERR(fsl_dev->fbdev)) {
+ ret = PTR_ERR(fsl_dev->fbdev);
+ fsl_dev->fbdev = NULL;
+ goto done;
+ }
return 0;
done:
@@ -103,9 +127,12 @@ done:
static int fsl_dcu_unload(struct drm_device *dev)
{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+
drm_mode_config_cleanup(dev);
drm_vblank_cleanup(dev);
drm_irq_uninstall(dev);
+ drm_flip_work_cleanup(&fsl_dev->unref_work);
dev->dev_private = NULL;
@@ -114,6 +141,7 @@ static int fsl_dcu_unload(struct drm_device *dev)
static void fsl_dcu_drm_preclose(struct drm_device *dev, struct drm_file *file)
{
+ fsl_dcu_crtc_cancel_page_flip(dev, file);
}
static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg)
@@ -124,18 +152,27 @@ static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg)
int ret;
ret = regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_STATUS failed\n");
- if (int_status & DCU_INT_STATUS_VBLANK)
+ if (ret) {
+ dev_err(dev->dev, "read DCU_INT_STATUS failed\n");
+ return IRQ_NONE;
+ }
+
+ if (int_status & DCU_INT_STATUS_VBLANK) {
drm_handle_vblank(dev, 0);
- ret = regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0xffffffff);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_STATUS failed\n");
- ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
- DCU_UPDATE_MODE_READREG);
- if (ret)
- dev_err(dev->dev, "set DCU_UPDATE_MODE failed\n");
+ fsl_dcu_crtc_finish_page_flip(dev);
+
+ if (fsl_dev->cleanup_state) {
+ drm_flip_work_queue(&fsl_dev->unref_work,
+ fsl_dev->cleanup_state);
+ fsl_dev->cleanup_state = NULL;
+
+ drm_flip_work_commit(&fsl_dev->unref_work,
+ fsl_dev->unref_wq);
+ }
+ }
+
+ regmap_write(fsl_dev->regmap, DCU_INT_STATUS, int_status);
return IRQ_HANDLED;
}
@@ -144,15 +181,11 @@ static int fsl_dcu_drm_enable_vblank(struct drm_device *dev, unsigned int pipe)
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
unsigned int value;
- int ret;
- ret = regmap_read(fsl_dev->regmap, DCU_INT_MASK, &value);
- if (ret)
- dev_err(dev->dev, "read DCU_INT_MASK failed\n");
+ regmap_read(fsl_dev->regmap, DCU_INT_MASK, &value);
value &= ~DCU_INT_MASK_VBLANK;
- ret = regmap_write(fsl_dev->regmap, DCU_INT_MASK, value);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_MASK failed\n");
+ regmap_write(fsl_dev->regmap, DCU_INT_MASK, value);
+
return 0;
}
@@ -161,15 +194,17 @@ static void fsl_dcu_drm_disable_vblank(struct drm_device *dev,
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
unsigned int value;
- int ret;
- ret = regmap_read(fsl_dev->regmap, DCU_INT_MASK, &value);
- if (ret)
- dev_err(dev->dev, "read DCU_INT_MASK failed\n");
+ regmap_read(fsl_dev->regmap, DCU_INT_MASK, &value);
value |= DCU_INT_MASK_VBLANK;
- ret = regmap_write(fsl_dev->regmap, DCU_INT_MASK, value);
- if (ret)
- dev_err(dev->dev, "set DCU_INT_MASK failed\n");
+ regmap_write(fsl_dev->regmap, DCU_INT_MASK, value);
+}
+
+static void fsl_dcu_drm_lastclose(struct drm_device *dev)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+
+ drm_fbdev_cma_restore_mode(fsl_dev->fbdev);
}
static const struct file_operations fsl_dcu_drm_fops = {
@@ -189,6 +224,7 @@ static const struct file_operations fsl_dcu_drm_fops = {
static struct drm_driver fsl_dcu_drm_driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET
| DRIVER_PRIME | DRIVER_ATOMIC,
+ .lastclose = fsl_dcu_drm_lastclose,
.load = fsl_dcu_load,
.unload = fsl_dcu_unload,
.preclose = fsl_dcu_drm_preclose,
@@ -226,11 +262,18 @@ static int fsl_dcu_drm_pm_suspend(struct device *dev)
if (!fsl_dev)
return 0;
+ disable_irq(fsl_dev->irq);
drm_kms_helper_poll_disable(fsl_dev->drm);
- regcache_cache_only(fsl_dev->regmap, true);
- regcache_mark_dirty(fsl_dev->regmap);
- clk_disable(fsl_dev->clk);
- clk_unprepare(fsl_dev->clk);
+ fsl_dcu_fbdev_suspend(fsl_dev->drm);
+
+ fsl_dev->state = drm_atomic_helper_suspend(fsl_dev->drm);
+ if (IS_ERR(fsl_dev->state)) {
+ fsl_dcu_fbdev_resume(fsl_dev->drm);
+ enable_irq(fsl_dev->irq);
+ return PTR_ERR(fsl_dev->state);
+ }
+
+ clk_disable_unprepare(fsl_dev->clk);
return 0;
}
@@ -243,21 +286,22 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
if (!fsl_dev)
return 0;
- ret = clk_enable(fsl_dev->clk);
+ ret = clk_prepare_enable(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
- clk_unprepare(fsl_dev->clk);
- return ret;
- }
- ret = clk_prepare(fsl_dev->clk);
- if (ret < 0) {
- dev_err(dev, "failed to prepare dcu clk\n");
return ret;
}
+ fsl_tcon_bypass_enable(fsl_dev->tcon);
+ fsl_dcu_drm_init_planes(fsl_dev->drm);
+
+ drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
+
+ regmap_write(fsl_dev->regmap, DCU_INT_MASK, fsl_dev->irq_state);
+
+ fsl_dcu_fbdev_resume(fsl_dev->drm);
drm_kms_helper_poll_enable(fsl_dev->drm);
- regcache_cache_only(fsl_dev->regmap, false);
- regcache_sync(fsl_dev->regmap);
+ enable_irq(fsl_dev->irq);
return 0;
}
@@ -271,12 +315,14 @@ static const struct fsl_dcu_soc_data fsl_dcu_ls1021a_data = {
.name = "ls1021a",
.total_layer = 16,
.max_layer = 4,
+ .layer_regs = LS1021A_LAYER_REG_NUM,
};
static const struct fsl_dcu_soc_data fsl_dcu_vf610_data = {
.name = "vf610",
.total_layer = 64,
.max_layer = 6,
+ .layer_regs = VF610_LAYER_REG_NUM,
};
static const struct of_device_id fsl_dcu_of_match[] = {
@@ -299,6 +345,9 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct drm_driver *driver = &fsl_dcu_drm_driver;
+ struct clk *pix_clk_in;
+ char pix_clk_name[32];
+ const char *pix_clk_in_name;
const struct of_device_id *id;
int ret;
@@ -306,6 +355,11 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
if (!fsl_dev)
return -ENOMEM;
+ id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
+ if (!id)
+ return -ENODEV;
+ fsl_dev->soc = id->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "could not get memory IO resource\n");
@@ -324,40 +378,48 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
return -ENXIO;
}
+ fsl_dev->regmap = devm_regmap_init_mmio(dev, base,
+ &fsl_dcu_regmap_config);
+ if (IS_ERR(fsl_dev->regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(fsl_dev->regmap);
+ }
+
fsl_dev->clk = devm_clk_get(dev, "dcu");
if (IS_ERR(fsl_dev->clk)) {
- ret = PTR_ERR(fsl_dev->clk);
dev_err(dev, "failed to get dcu clock\n");
- return ret;
- }
- ret = clk_prepare(fsl_dev->clk);
- if (ret < 0) {
- dev_err(dev, "failed to prepare dcu clk\n");
- return ret;
+ return PTR_ERR(fsl_dev->clk);
}
- ret = clk_enable(fsl_dev->clk);
+ ret = clk_prepare_enable(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
- clk_unprepare(fsl_dev->clk);
return ret;
}
- fsl_dev->regmap = devm_regmap_init_mmio(dev, base,
- &fsl_dcu_regmap_config);
- if (IS_ERR(fsl_dev->regmap)) {
- dev_err(dev, "regmap init failed\n");
- return PTR_ERR(fsl_dev->regmap);
+ pix_clk_in = devm_clk_get(dev, "pix");
+ if (IS_ERR(pix_clk_in)) {
+ /* legancy binding, use dcu clock as pixel clock input */
+ pix_clk_in = fsl_dev->clk;
}
- id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
- if (!id)
- return -ENODEV;
- fsl_dev->soc = id->data;
+ pix_clk_in_name = __clk_get_name(pix_clk_in);
+ snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
+ fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
+ pix_clk_in_name, 0, base + DCU_DIV_RATIO,
+ 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
+ if (IS_ERR(fsl_dev->pix_clk)) {
+ dev_err(dev, "failed to register pix clk\n");
+ ret = PTR_ERR(fsl_dev->pix_clk);
+ goto disable_clk;
+ }
drm = drm_dev_alloc(driver, dev);
- if (!drm)
- return -ENOMEM;
+ if (!drm) {
+ ret = -ENOMEM;
+ goto unregister_pix_clk;
+ }
+ fsl_dev->tcon = fsl_tcon_init(dev);
fsl_dev->dev = dev;
fsl_dev->drm = drm;
fsl_dev->np = dev->of_node;
@@ -377,6 +439,10 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
unref:
drm_dev_unref(drm);
+unregister_pix_clk:
+ clk_unregister(fsl_dev->pix_clk);
+disable_clk:
+ clk_disable_unprepare(fsl_dev->clk);
return ret;
}
@@ -384,6 +450,9 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev)
{
struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
+ clk_disable_unprepare(fsl_dev->clk);
+ clk_disable_unprepare(fsl_dev->pix_clk);
+ clk_unregister(fsl_dev->pix_clk);
drm_put_dev(fsl_dev->drm);
return 0;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index 579b9e44e764..22210766e77d 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -47,8 +47,8 @@
#define DCU_VSYN_PARA_FP(x) (x)
#define DCU_SYN_POL 0x0024
-#define DCU_SYN_POL_INV_PXCK_FALL (0 << 6)
-#define DCU_SYN_POL_NEG_REMAIN (0 << 5)
+#define DCU_SYN_POL_INV_PXCK BIT(6)
+#define DCU_SYN_POL_NEG BIT(5)
#define DCU_SYN_POL_INV_VS_LOW BIT(1)
#define DCU_SYN_POL_INV_HS_LOW BIT(0)
@@ -118,11 +118,11 @@
#define DCU_CTRLDESCLN(layer, reg) (0x200 + (reg - 1) * 4 + (layer) * 0x40)
-#define DCU_LAYER_HEIGHT(x) ((x) << 16)
-#define DCU_LAYER_WIDTH(x) (x)
+#define DCU_LAYER_HEIGHT(x) (((x) & 0x7ff) << 16)
+#define DCU_LAYER_WIDTH(x) ((x) & 0x7ff)
-#define DCU_LAYER_POSY(x) ((x) << 16)
-#define DCU_LAYER_POSX(x) (x)
+#define DCU_LAYER_POSY(x) (((x) & 0xfff) << 16)
+#define DCU_LAYER_POSX(x) ((x) & 0xfff)
#define DCU_LAYER_EN BIT(31)
#define DCU_LAYER_TILE_EN BIT(30)
@@ -133,7 +133,9 @@
#define DCU_LAYER_RLE_EN BIT(15)
#define DCU_LAYER_LUOFFS(x) ((x) << 4)
#define DCU_LAYER_BB_ON BIT(2)
-#define DCU_LAYER_AB(x) (x)
+#define DCU_LAYER_AB_NONE 0
+#define DCU_LAYER_AB_CHROMA_KEYING 1
+#define DCU_LAYER_AB_WHOLE_FRAME 2
#define DCU_LAYER_CKMAX_R(x) ((x) << 16)
#define DCU_LAYER_CKMAX_G(x) ((x) << 8)
@@ -166,6 +168,7 @@
struct clk;
struct device;
struct drm_device;
+struct drm_flip_work;
struct fsl_dcu_soc_data {
const char *name;
@@ -173,6 +176,7 @@ struct fsl_dcu_soc_data {
unsigned int total_layer;
/*max layer number DCU supported*/
unsigned int max_layer;
+ unsigned int layer_regs;
};
struct fsl_dcu_drm_device {
@@ -181,17 +185,27 @@ struct fsl_dcu_drm_device {
struct regmap *regmap;
int irq;
struct clk *clk;
+ struct clk *pix_clk;
+ struct fsl_tcon *tcon;
/*protects hardware register*/
spinlock_t irq_lock;
struct drm_device *drm;
struct drm_fbdev_cma *fbdev;
- struct drm_crtc crtc;
+ struct fsl_dcu_drm_crtc crtc;
struct drm_encoder encoder;
struct fsl_dcu_drm_connector connector;
const struct fsl_dcu_soc_data *soc;
+ struct drm_atomic_state *cleanup_state;
+ struct workqueue_struct *unref_wq;
+ struct drm_flip_work unref_work;
+ struct drm_atomic_state *state;
+ unsigned int irq_state;
};
-void fsl_dcu_fbdev_init(struct drm_device *dev);
+void fsl_dcu_fbdev_suspend(struct drm_device *dev);
+void fsl_dcu_fbdev_resume(struct drm_device *dev);
int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
+void fsl_dcu_cleanup_atomic_state(struct drm_device *dev,
+ struct drm_atomic_state *state);
#endif /* __FSL_DCU_DRM_DRV_H__ */
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
index 8b8b819ea704..eaa447e26423 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
@@ -9,15 +9,29 @@
* (at your option) any later version.
*/
+#include <linux/console.h>
+
#include <drm/drmP.h>
#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_flip_work.h>
#include "fsl_dcu_drm_drv.h"
-/* initialize fbdev helper */
-void fsl_dcu_fbdev_init(struct drm_device *dev)
+void fsl_dcu_fbdev_suspend(struct drm_device *dev)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
+
+ console_lock();
+ drm_fb_helper_set_suspend(drm_fbdev_cma_get_helper(fsl_dev->fbdev), 1);
+ console_unlock();
+}
+
+void fsl_dcu_fbdev_resume(struct drm_device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
- fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
+ console_lock();
+ drm_fb_helper_set_suspend(drm_fbdev_cma_get_helper(fsl_dev->fbdev), 0);
+ console_unlock();
}
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
index 0ef5959710e7..710d1ca7a9b4 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
@@ -10,21 +10,64 @@
*/
#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_flip_work.h>
#include <drm/drm_fb_cma_helper.h>
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
+void fsl_dcu_cleanup_atomic_state(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ drm_atomic_helper_cleanup_planes(dev, state);
+ drm_atomic_state_free(state);
+}
+
+static int fsl_dcu_drm_atomic_commit(struct drm_device *dev,
+ struct drm_atomic_state *state,
+ bool async)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ int ret;
+
+ ret = drm_atomic_helper_prepare_planes(dev, state);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * This is the point of no return - everything below never fails except
+ * when the hw goes bonghits. Which means we can commit the new state on
+ * the software side now.
+ */
+ drm_atomic_helper_swap_state(dev, state);
+
+ drm_atomic_helper_commit_modeset_disables(dev, state);
+ drm_atomic_helper_commit_planes(dev, state, false);
+ drm_atomic_helper_commit_modeset_enables(dev, state);
+
+ if (async) {
+ fsl_dev->cleanup_state = state;
+ } else {
+ drm_atomic_helper_wait_for_vblanks(dev, state);
+ fsl_dcu_cleanup_atomic_state(dev, state);
+ }
+
+ return 0;
+}
+
static const struct drm_mode_config_funcs fsl_dcu_drm_mode_config_funcs = {
.atomic_check = drm_atomic_helper_check,
- .atomic_commit = drm_atomic_helper_commit,
+ .atomic_commit = fsl_dcu_drm_atomic_commit,
.fb_create = drm_fb_cma_create,
};
int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
{
+ int ret;
+
drm_mode_config_init(fsl_dev->drm);
fsl_dev->drm->mode_config.min_width = 0;
@@ -33,11 +76,25 @@ int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
fsl_dev->drm->mode_config.max_height = 2047;
fsl_dev->drm->mode_config.funcs = &fsl_dcu_drm_mode_config_funcs;
- drm_kms_helper_poll_init(fsl_dev->drm);
- fsl_dcu_drm_crtc_create(fsl_dev);
- fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc);
- fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
+ ret = fsl_dcu_drm_crtc_create(fsl_dev);
+ if (ret)
+ return ret;
+
+ ret = fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc.base);
+ if (ret)
+ goto fail_encoder;
+
+ ret = fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
+ if (ret)
+ goto fail_connector;
+
drm_mode_config_reset(fsl_dev->drm);
+ drm_kms_helper_poll_init(fsl_dev->drm);
return 0;
+fail_encoder:
+ fsl_dev->crtc.base.funcs->destroy(&fsl_dev->crtc.base);
+fail_connector:
+ fsl_dev->encoder.funcs->destroy(&fsl_dev->encoder);
+ return ret;
}
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
index 51daaea40b4d..3ad0debacadf 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
@@ -15,6 +15,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_flip_work.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_plane_helper.h>
@@ -41,11 +42,17 @@ static int fsl_dcu_drm_plane_atomic_check(struct drm_plane *plane,
{
struct drm_framebuffer *fb = state->fb;
+ if (!state->fb || !state->crtc)
+ return 0;
+
switch (fb->pixel_format) {
case DRM_FORMAT_RGB565:
case DRM_FORMAT_RGB888:
+ case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_ARGB8888:
- case DRM_FORMAT_BGRA4444:
+ case DRM_FORMAT_XRGB4444:
+ case DRM_FORMAT_ARGB4444:
+ case DRM_FORMAT_XRGB1555:
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_YUV422:
return 0;
@@ -59,19 +66,15 @@ static void fsl_dcu_drm_plane_atomic_disable(struct drm_plane *plane,
{
struct fsl_dcu_drm_device *fsl_dev = plane->dev->dev_private;
unsigned int value;
- int index, ret;
+ int index;
index = fsl_dcu_drm_plane_index(plane);
if (index < 0)
return;
- ret = regmap_read(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4), &value);
- if (ret)
- dev_err(fsl_dev->dev, "read DCU_INT_MASK failed\n");
+ regmap_read(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4), &value);
value &= ~DCU_LAYER_EN;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4), value);
- if (ret)
- dev_err(fsl_dev->dev, "set DCU register failed\n");
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4), value);
}
static void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
@@ -82,8 +85,8 @@ static void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *state = plane->state;
struct drm_framebuffer *fb = plane->state->fb;
struct drm_gem_cma_object *gem;
- unsigned int alpha, bpp;
- int index, ret;
+ unsigned int alpha = DCU_LAYER_AB_NONE, bpp;
+ int index;
if (!fb)
return;
@@ -97,96 +100,69 @@ static void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
switch (fb->pixel_format) {
case DRM_FORMAT_RGB565:
bpp = FSL_DCU_RGB565;
- alpha = 0xff;
break;
case DRM_FORMAT_RGB888:
bpp = FSL_DCU_RGB888;
- alpha = 0xff;
break;
case DRM_FORMAT_ARGB8888:
+ alpha = DCU_LAYER_AB_WHOLE_FRAME;
+ /* fall-through */
+ case DRM_FORMAT_XRGB8888:
bpp = FSL_DCU_ARGB8888;
- alpha = 0xff;
break;
- case DRM_FORMAT_BGRA4444:
+ case DRM_FORMAT_ARGB4444:
+ alpha = DCU_LAYER_AB_WHOLE_FRAME;
+ /* fall-through */
+ case DRM_FORMAT_XRGB4444:
bpp = FSL_DCU_ARGB4444;
- alpha = 0xff;
break;
case DRM_FORMAT_ARGB1555:
+ alpha = DCU_LAYER_AB_WHOLE_FRAME;
+ /* fall-through */
+ case DRM_FORMAT_XRGB1555:
bpp = FSL_DCU_ARGB1555;
- alpha = 0xff;
break;
case DRM_FORMAT_YUV422:
bpp = FSL_DCU_YUV422;
- alpha = 0xff;
break;
default:
return;
}
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 1),
- DCU_LAYER_HEIGHT(state->crtc_h) |
- DCU_LAYER_WIDTH(state->crtc_w));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 2),
- DCU_LAYER_POSY(state->crtc_y) |
- DCU_LAYER_POSX(state->crtc_x));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap,
- DCU_CTRLDESCLN(index, 3), gem->paddr);
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4),
- DCU_LAYER_EN |
- DCU_LAYER_TRANS(alpha) |
- DCU_LAYER_BPP(bpp) |
- DCU_LAYER_AB(0));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 5),
- DCU_LAYER_CKMAX_R(0xFF) |
- DCU_LAYER_CKMAX_G(0xFF) |
- DCU_LAYER_CKMAX_B(0xFF));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 6),
- DCU_LAYER_CKMIN_R(0) |
- DCU_LAYER_CKMIN_G(0) |
- DCU_LAYER_CKMIN_B(0));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 7), 0);
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 8),
- DCU_LAYER_FG_FCOLOR(0));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 9),
- DCU_LAYER_BG_BCOLOR(0));
- if (ret)
- goto set_failed;
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 1),
+ DCU_LAYER_HEIGHT(state->crtc_h) |
+ DCU_LAYER_WIDTH(state->crtc_w));
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 2),
+ DCU_LAYER_POSY(state->crtc_y) |
+ DCU_LAYER_POSX(state->crtc_x));
+ regmap_write(fsl_dev->regmap,
+ DCU_CTRLDESCLN(index, 3), gem->paddr);
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 4),
+ DCU_LAYER_EN |
+ DCU_LAYER_TRANS(0xff) |
+ DCU_LAYER_BPP(bpp) |
+ alpha);
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 5),
+ DCU_LAYER_CKMAX_R(0xFF) |
+ DCU_LAYER_CKMAX_G(0xFF) |
+ DCU_LAYER_CKMAX_B(0xFF));
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 6),
+ DCU_LAYER_CKMIN_R(0) |
+ DCU_LAYER_CKMIN_G(0) |
+ DCU_LAYER_CKMIN_B(0));
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 7), 0);
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 8),
+ DCU_LAYER_FG_FCOLOR(0));
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 9),
+ DCU_LAYER_BG_BCOLOR(0));
+
if (!strcmp(fsl_dev->soc->name, "ls1021a")) {
- ret = regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 10),
- DCU_LAYER_POST_SKIP(0) |
- DCU_LAYER_PRE_SKIP(0));
- if (ret)
- goto set_failed;
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(index, 10),
+ DCU_LAYER_POST_SKIP(0) |
+ DCU_LAYER_PRE_SKIP(0));
}
- ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
- DCU_MODE_DCU_MODE_MASK,
- DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
- if (ret)
- goto set_failed;
- ret = regmap_write(fsl_dev->regmap,
- DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
- if (ret)
- goto set_failed;
- return;
-set_failed:
- dev_err(fsl_dev->dev, "set DCU register failed\n");
+ return;
}
static void
@@ -213,6 +189,7 @@ static const struct drm_plane_helper_funcs fsl_dcu_drm_plane_helper_funcs = {
static void fsl_dcu_drm_plane_destroy(struct drm_plane *plane)
{
drm_plane_cleanup(plane);
+ kfree(plane);
}
static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = {
@@ -227,34 +204,69 @@ static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = {
static const u32 fsl_dcu_drm_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_RGB888,
+ DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_XRGB4444,
DRM_FORMAT_ARGB4444,
+ DRM_FORMAT_XRGB1555,
DRM_FORMAT_ARGB1555,
DRM_FORMAT_YUV422,
};
-struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
+void fsl_dcu_drm_init_planes(struct drm_device *dev)
{
- struct drm_plane *primary;
- int ret;
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ int i, j;
- primary = kzalloc(sizeof(*primary), GFP_KERNEL);
- if (!primary) {
- DRM_DEBUG_KMS("Failed to allocate primary plane\n");
- return NULL;
+ for (i = 0; i < fsl_dev->soc->total_layer; i++) {
+ for (j = 1; j <= fsl_dev->soc->layer_regs; j++)
+ regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0);
}
+}
+
+int fsl_dcu_drm_create_planes(struct drm_device *dev, struct drm_plane **primary,
+ struct drm_plane **cursor)
+{
+ struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ struct drm_plane *planes, *plane;
+ int total_layer = fsl_dev->soc->total_layer;
+ int ret, i;
- /* possible_crtc's will be filled in later by crtc_init */
- ret = drm_universal_plane_init(dev, primary, 0,
+ planes = devm_kzalloc(dev->dev, sizeof(struct drm_plane) * total_layer,
+ GFP_KERNEL);
+ if (!planes) {
+ DRM_DEBUG_KMS("Failed to allocate planes\n");
+ return -ENOMEM;
+ }
+
+ plane = planes;
+
+ for (i = 0; i < total_layer; i++) {
+ enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY;
+ if (i == 0) {
+ type = DRM_PLANE_TYPE_PRIMARY;
+ *primary = plane;
+ } else if (i == total_layer - 1) {
+ type = DRM_PLANE_TYPE_CURSOR;
+ *cursor = plane;
+ }
+
+ ret = drm_universal_plane_init(dev, plane, 1,
&fsl_dcu_drm_plane_funcs,
fsl_dcu_drm_plane_formats,
ARRAY_SIZE(fsl_dcu_drm_plane_formats),
- DRM_PLANE_TYPE_PRIMARY);
- if (ret) {
- kfree(primary);
- primary = NULL;
+ type);
+ if (ret)
+ goto err_cleanup_planes;
+
+ drm_plane_helper_add(plane, &fsl_dcu_drm_plane_helper_funcs);
+ plane++;
}
- drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs);
- return primary;
+ return 0;
+
+err_cleanup_planes:
+ list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+ drm_plane_cleanup(plane);
+ return ret;
}
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
index d657f088d859..be3604fb43ce 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
@@ -12,6 +12,8 @@
#ifndef __FSL_DCU_DRM_PLANE_H__
#define __FSL_DCU_DRM_PLANE_H__
-struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev);
+void fsl_dcu_drm_init_planes(struct drm_device *dev);
+int fsl_dcu_drm_create_planes(struct drm_device *dev, struct drm_plane **primary,
+ struct drm_plane **cursor);
#endif /* __FSL_DCU_DRM_PLANE_H__ */
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
index fe8ab5da04fb..4246129972b6 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
@@ -14,9 +14,11 @@
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_flip_work.h>
#include <drm/drm_panel.h>
#include "fsl_dcu_drm_drv.h"
+#include "fsl_tcon.h"
static int
fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
@@ -56,6 +58,10 @@ int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
int ret;
encoder->possible_crtcs = 1;
+
+ /* Set TCON to bypass for parallel RGB/LVDS */
+ fsl_tcon_bypass_enable(fsl_dev->tcon);
+
ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs,
DRM_MODE_ENCODER_LVDS);
if (ret < 0)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_tcon.c b/drivers/gpu/drm/fsl-dcu/fsl_tcon.c
new file mode 100644
index 000000000000..e5001a186850
--- /dev/null
+++ b/drivers/gpu/drm/fsl-dcu/fsl_tcon.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2015 Toradex AG
+ *
+ * Stefan Agner <stefan@agner.ch>
+ *
+ * Freescale TCON device driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "fsl_tcon.h"
+
+void fsl_tcon_bypass_disable(struct fsl_tcon *tcon)
+{
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS, 0);
+}
+
+void fsl_tcon_bypass_enable(struct fsl_tcon *tcon)
+{
+ regmap_update_bits(tcon->regs, FSL_TCON_CTRL1,
+ FSL_TCON_CTRL1_TCON_BYPASS,
+ FSL_TCON_CTRL1_TCON_BYPASS);
+}
+
+static struct regmap_config fsl_tcon_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .name = "tcon",
+};
+
+static int fsl_tcon_init_regmap(struct device *dev,
+ struct fsl_tcon *tcon,
+ struct device_node *np)
+{
+ struct resource res;
+ void __iomem *regs;
+
+ if (of_address_to_resource(np, 0, &res))
+ return -EINVAL;
+
+ regs = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ tcon->regs = devm_regmap_init_mmio(dev, regs,
+ &fsl_tcon_regmap_config);
+ if (IS_ERR(tcon->regs))
+ return PTR_ERR(tcon->regs);
+
+ return 0;
+}
+
+struct fsl_tcon *fsl_tcon_init(struct device *dev)
+{
+ struct fsl_tcon *tcon;
+ struct device_node *np;
+ int ret;
+
+ tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
+ if (!tcon)
+ return NULL;
+
+ np = of_parse_phandle(dev->of_node, "fsl,tcon", 0);
+ if (!np) {
+ dev_warn(dev, "Couldn't find the tcon node\n");
+ return NULL;
+ }
+
+ ret = fsl_tcon_init_regmap(dev, tcon, np);
+ if (ret) {
+ dev_err(dev, "Couldn't create the TCON regmap\n");
+ goto err_node_put;
+ }
+
+ tcon->ipg_clk = of_clk_get_by_name(np, "ipg");
+ if (IS_ERR(tcon->ipg_clk)) {
+ dev_err(dev, "Couldn't get the TCON bus clock\n");
+ goto err_node_put;
+ }
+
+ clk_prepare_enable(tcon->ipg_clk);
+
+ return tcon;
+
+err_node_put:
+ of_node_put(np);
+ return NULL;
+}
+
+void fsl_tcon_free(struct fsl_tcon *tcon)
+{
+ clk_disable_unprepare(tcon->ipg_clk);
+ clk_put(tcon->ipg_clk);
+}
+
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_tcon.h b/drivers/gpu/drm/fsl-dcu/fsl_tcon.h
new file mode 100644
index 000000000000..80a7617de58f
--- /dev/null
+++ b/drivers/gpu/drm/fsl-dcu/fsl_tcon.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2015 Toradex AG
+ *
+ * Stefan Agner <stefan@agner.ch>
+ *
+ * Freescale TCON device driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __FSL_TCON_H__
+#define __FSL_TCON_H__
+
+#include <linux/bitops.h>
+
+#define FSL_TCON_CTRL1 0x0
+#define FSL_TCON_CTRL1_TCON_BYPASS BIT(29)
+
+struct fsl_tcon {
+ struct regmap *regs;
+ struct clk *ipg_clk;
+};
+
+struct fsl_tcon *fsl_tcon_init(struct device *dev);
+void fsl_tcon_free(struct fsl_tcon *tcon);
+
+void fsl_tcon_bypass_disable(struct fsl_tcon *tcon);
+void fsl_tcon_bypass_enable(struct fsl_tcon *tcon);
+
+#endif /* __FSL_TCON_H__ */
diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c
index 5378bdc3bbf9..5f936223e67b 100644
--- a/drivers/gpu/drm/imx/imx-drm-core.c
+++ b/drivers/gpu/drm/imx/imx-drm-core.c
@@ -313,6 +313,7 @@ static int imx_drm_driver_load(struct drm_device *drm, unsigned long flags)
dev_warn(drm->dev, "Invalid legacyfb_depth. Defaulting to 16bpp\n");
legacyfb_depth = 16;
}
+ drm_helper_disable_unused_functions(drm);
imxdrm->fbhelper = drm_fbdev_cma_init(drm, legacyfb_depth,
drm->mode_config.num_crtc, MAX_CRTC);
if (IS_ERR(imxdrm->fbhelper)) {
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 64b23bdebd1d..2babb3636c91 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -68,6 +68,7 @@ struct panel_desc {
} delay;
u32 bus_format;
+ u32 bus_flags;
};
struct panel_simple {
@@ -140,6 +141,7 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
if (panel->desc->bus_format)
drm_display_info_set_bus_formats(&connector->display_info,
&panel->desc->bus_format, 1);
+ connector->display_info.bus_flags = panel->desc->bus_flags;
return num;
}
@@ -951,6 +953,29 @@ static const struct panel_desc lg_lp129qe = {
},
};
+static const struct drm_display_mode logic_lt161010_2nhc_mode = {
+ .clock = 33300,
+ .hdisplay = 800,
+ .hsync_start = 800 + 40,
+ .hsync_end = 800 + 40 + 128,
+ .htotal = 800 + 40 + 128 + 88,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 2 + 10,
+ .vtotal = 480 + 2 + 10 + 33,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc logic_lt161010_2nhc = {
+ .modes = &logic_lt161010_2nhc_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 165,
+ .height = 100,
+ },
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+};
+
static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
.clock = 10870,
.hdisplay = 480,
@@ -962,6 +987,7 @@ static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
.vsync_end = 272 + 2 + 4,
.vtotal = 272 + 2 + 4 + 2,
.vrefresh = 74,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
};
static const struct panel_desc nec_nl4827hc19_05b = {
@@ -972,7 +998,8 @@ static const struct panel_desc nec_nl4827hc19_05b = {
.width = 95,
.height = 54,
},
- .bus_format = MEDIA_BUS_FMT_RGB888_1X24
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
};
static const struct display_timing okaya_rs800480t_7x0gp_timing = {
@@ -1098,6 +1125,51 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
+static const struct drm_display_mode tpk_f07a_0102_mode = {
+ .clock = 33260,
+ .hdisplay = 800,
+ .hsync_start = 800 + 40,
+ .hsync_end = 800 + 40 + 128,
+ .htotal = 800 + 40 + 128 + 88,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 2,
+ .vtotal = 480 + 10 + 2 + 33,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc tpk_f07a_0102 = {
+ .modes = &tpk_f07a_0102_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+};
+
+static const struct drm_display_mode tpk_f10a_0102_mode = {
+ .clock = 45000,
+ .hdisplay = 1024,
+ .hsync_start = 1024 + 176,
+ .hsync_end = 1024 + 176 + 5,
+ .htotal = 1024 + 176 + 5 + 88,
+ .vdisplay = 600,
+ .vsync_start = 600 + 20,
+ .vsync_end = 600 + 20 + 5,
+ .vtotal = 600 + 20 + 5 + 25,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc tpk_f10a_0102 = {
+ .modes = &tpk_f10a_0102_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 223,
+ .height = 125,
+ },
+};
+
static const struct of_device_id platform_of_match[] = {
{
.compatible = "ampire,am800480r3tmqwa1h",
@@ -1175,6 +1247,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "lg,lp129qe",
.data = &lg_lp129qe,
}, {
+ .compatible = "logic,lt161010-2nhc",
+ .data = &logic_lt161010_2nhc,
+ }, {
.compatible = "nec,nl4827hc19-05b",
.data = &nec_nl4827hc19_05b,
}, {
@@ -1193,6 +1268,12 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
+ .compatible = "tpk,f07a-0102",
+ .data = &tpk_f07a_0102,
+ }, {
+ .compatible = "tpk,f10a-0102",
+ .data = &tpk_f10a_0102,
+ }, {
/* sentinel */
}
};
diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c
index 1469987949d8..506b5626f3ed 100644
--- a/drivers/gpu/drm/sti/sti_drv.c
+++ b/drivers/gpu/drm/sti/sti_drv.c
@@ -160,6 +160,7 @@ static int sti_load(struct drm_device *dev, unsigned long flags)
drm_mode_config_reset(dev);
+ drm_helper_disable_unused_functions(dev);
drm_fbdev_cma_init(dev, 32,
dev->mode_config.num_crtc,
dev->mode_config.num_connector);
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 876cad58b1f9..24be31d69701 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -294,6 +294,7 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags)
break;
}
+ drm_helper_disable_unused_functions(dev);
priv->fbdev = drm_fbdev_cma_init(dev, bpp,
dev->mode_config.num_crtc,
dev->mode_config.num_connector);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d121c5732d7d..0f6f4a89d11a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -987,11 +987,24 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
}
-static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
struct platform_device *pdev)
{
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
+ i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+ dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+ return PTR_ERR(i2c_imx->pinctrl);
+ }
+
i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
PINCTRL_STATE_DEFAULT);
i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
@@ -1001,12 +1014,15 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->scl_gpio = of_get_named_gpio_flags(pdev->dev.of_node,
"scl-gpios", 0, NULL);
- if (!gpio_is_valid(rinfo->sda_gpio) ||
- !gpio_is_valid(rinfo->scl_gpio) ||
- IS_ERR(i2c_imx->pinctrl_pins_default) ||
- IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
+ if (rinfo->sda_gpio == -EPROBE_DEFER ||
+ rinfo->scl_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (!gpio_is_valid(rinfo->sda_gpio) ||
+ !gpio_is_valid(rinfo->scl_gpio) ||
+ IS_ERR(i2c_imx->pinctrl_pins_default) ||
+ IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
- return;
+ return 0;
}
dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
@@ -1016,6 +1032,8 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
rinfo->recover_bus = i2c_generic_gpio_recovery;
i2c_imx->adapter.bus_recovery_info = rinfo;
+
+ return 0;
}
static u32 i2c_imx_func(struct i2c_adapter *adapter)
@@ -1087,12 +1105,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
return ret;
}
- i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (IS_ERR(i2c_imx->pinctrl)) {
- ret = PTR_ERR(i2c_imx->pinctrl);
- goto clk_disable;
- }
-
/* Request IRQ */
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
pdev->name, i2c_imx);
@@ -1119,7 +1131,11 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx, IMX_I2C_I2CR);
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
- i2c_imx_init_recovery_info(i2c_imx, pdev);
+ /* Init optional bus recovery function */
+ ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+ /* Give it another chance if pinctrl used is not ready yet */
+ if (ret == -EPROBE_DEFER)
+ goto clk_disable;
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index e701e28fb1cd..75e97081994f 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -196,4 +196,14 @@ config MCP4922
To compile this driver as a module, choose M here: the module
will be called mcp4922.
+config VF610_DAC
+ tristate "Vybrid vf610 DAC driver"
+ depends on OF
+ depends on HAS_IOMEM
+ help
+ Say yes here to support Vybrid board digital-to-analog converter.
+
+ This driver can also be built as a module. If so, the module will
+ be called vf610_dac.
+
endmenu
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 63ae05633e0c..93feb2717671 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MAX517) += max517.o
obj-$(CONFIG_MAX5821) += max5821.o
obj-$(CONFIG_MCP4725) += mcp4725.o
obj-$(CONFIG_MCP4922) += mcp4922.o
+obj-$(CONFIG_VF610_DAC) += vf610_dac.o
diff --git a/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c
new file mode 100644
index 000000000000..c4ec7779b394
--- /dev/null
+++ b/drivers/iio/dac/vf610_dac.c
@@ -0,0 +1,298 @@
+/*
+ * Freescale Vybrid vf610 DAC driver
+ *
+ * Copyright 2016 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define VF610_DACx_STATCTRL 0x20
+
+#define VF610_DAC_DACEN BIT(15)
+#define VF610_DAC_DACRFS BIT(14)
+#define VF610_DAC_LPEN BIT(11)
+
+#define VF610_DAC_DAT0(x) ((x) & 0xFFF)
+
+enum vf610_conversion_mode_sel {
+ VF610_DAC_CONV_HIGH_POWER,
+ VF610_DAC_CONV_LOW_POWER,
+};
+
+struct vf610_dac {
+ struct clk *clk;
+ struct device *dev;
+ enum vf610_conversion_mode_sel conv_mode;
+ void __iomem *regs;
+};
+
+static void vf610_dac_init(struct vf610_dac *info)
+{
+ int val;
+
+ info->conv_mode = VF610_DAC_CONV_LOW_POWER;
+ val = VF610_DAC_DACEN | VF610_DAC_DACRFS |
+ VF610_DAC_LPEN;
+ writel(val, info->regs + VF610_DACx_STATCTRL);
+}
+
+static void vf610_dac_exit(struct vf610_dac *info)
+{
+ int val;
+
+ val = readl(info->regs + VF610_DACx_STATCTRL);
+ val &= ~VF610_DAC_DACEN;
+ writel(val, info->regs + VF610_DACx_STATCTRL);
+}
+
+static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int mode)
+{
+ struct vf610_dac *info = iio_priv(indio_dev);
+ int val;
+
+ mutex_lock(&indio_dev->mlock);
+ info->conv_mode = mode;
+ val = readl(info->regs + VF610_DACx_STATCTRL);
+ if (mode)
+ val |= VF610_DAC_LPEN;
+ else
+ val &= ~VF610_DAC_LPEN;
+ writel(val, info->regs + VF610_DACx_STATCTRL);
+ mutex_unlock(&indio_dev->mlock);
+
+ return 0;
+}
+
+static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct vf610_dac *info = iio_priv(indio_dev);
+
+ return info->conv_mode;
+}
+
+static const char * const vf610_conv_modes[] = { "high-power", "low-power" };
+
+static const struct iio_enum vf610_conversion_mode = {
+ .items = vf610_conv_modes,
+ .num_items = ARRAY_SIZE(vf610_conv_modes),
+ .get = vf610_get_conversion_mode,
+ .set = vf610_set_conversion_mode,
+};
+
+static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
+ IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR,
+ &vf610_conversion_mode),
+ {},
+};
+
+#define VF610_DAC_CHAN(_chan_type) { \
+ .type = (_chan_type), \
+ .output = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .ext_info = vf610_ext_info, \
+}
+
+static const struct iio_chan_spec vf610_dac_iio_channels[] = {
+ VF610_DAC_CHAN(IIO_VOLTAGE),
+};
+
+static int vf610_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct vf610_dac *info = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ *val = VF610_DAC_DAT0(readl(info->regs));
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ /*
+ * DACRFS is always 1 for valid reference and typical
+ * reference voltage as per Vybrid datasheet is 3.3V
+ * from section 9.1.2.1 of Vybrid datasheet
+ */
+ *val = 3300 /* mV */;
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int vf610_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2,
+ long mask)
+{
+ struct vf610_dac *info = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ writel(VF610_DAC_DAT0(val), info->regs);
+ mutex_unlock(&indio_dev->mlock);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info vf610_dac_iio_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &vf610_read_raw,
+ .write_raw = &vf610_write_raw,
+};
+
+static const struct of_device_id vf610_dac_match[] = {
+ { .compatible = "fsl,vf610-dac", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_dac_match);
+
+static int vf610_dac_probe(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev;
+ struct vf610_dac *info;
+ struct resource *mem;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev,
+ sizeof(struct vf610_dac));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+ info->clk = devm_clk_get(&pdev->dev, "dac");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "Failed getting clock, err = %ld\n",
+ PTR_ERR(info->clk));
+ return PTR_ERR(info->clk);
+ }
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &vf610_dac_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = vf610_dac_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock\n");
+ return ret;
+ }
+
+ vf610_dac_init(info);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register the device\n");
+ goto error_iio_device_register;
+ }
+
+ return 0;
+
+error_iio_device_register:
+ clk_disable_unprepare(info->clk);
+
+ return ret;
+}
+
+static int vf610_dac_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct vf610_dac *info = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ vf610_dac_exit(info);
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_dac_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_dac *info = iio_priv(indio_dev);
+
+ vf610_dac_exit(info);
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+static int vf610_dac_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_dac *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ return ret;
+
+ vf610_dac_init(info);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, vf610_dac_resume);
+
+static struct platform_driver vf610_dac_driver = {
+ .probe = vf610_dac_probe,
+ .remove = vf610_dac_remove,
+ .driver = {
+ .name = "vf610-dac",
+ .of_match_table = vf610_dac_match,
+ .pm = &vf610_dac_pm_ops,
+ },
+};
+module_platform_driver(vf610_dac_driver);
+
+MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
+MODULE_DESCRIPTION("Freescale VF610 DAC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ae33da7ab51f..637c5a7d8efc 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -115,6 +115,14 @@ config TOUCHSCREEN_ATMEL_MXT
To compile this driver as a module, choose M here: the
module will be called atmel_mxt_ts.
+config TOUCHSCREEN_ATMEL_MXT_T37
+ bool "Support T37 Diagnostic Data"
+ depends on TOUCHSCREEN_ATMEL_MXT && VIDEO_V4L2
+ select VIDEOBUF2_VMALLOC
+ help
+ Say Y here if you want support to output data from the T37
+ Diagnostic Data object using a V4L device.
+
config TOUCHSCREEN_AUO_PIXCIR
tristate "AUO in-cell touchscreen using Pixcir ICs"
depends on I2C
@@ -619,6 +627,13 @@ config TOUCHSCREEN_MIGOR
To compile this driver as a module, choose M here: the
module will be called migor_ts.
+config TOUCHSCREEN_FUSION_F0710A
+ tristate "TouchRevolution Fusion F0710A Touchscreens"
+ depends on I2C
+ help
+ Say Y here if you want to support the multi-touch input driver for
+ the TouchRevolution Fusion 7 and 10 panels.
+
config TOUCHSCREEN_TOUCHRIGHT
tristate "Touchright serial touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index cbaa6abb08da..4ae9f5c8f6f2 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -91,3 +91,4 @@ obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
+obj-$(CONFIG_TOUCHSCREEN_FUSION_F0710A) += fusion_F0710A.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d955841da57d..8739e9aa5989 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4,6 +4,7 @@
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Copyright (C) 2011-2014 Atmel Corporation
* Copyright (C) 2012 Google, Inc.
+ * Copyright (C) 2016 Zodiac Inflight Innovations
*
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
@@ -27,7 +28,12 @@
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-vmalloc.h>
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -99,6 +105,8 @@ struct t7_config {
/* MXT_TOUCH_MULTI_T9 field */
#define MXT_T9_CTRL 0
+#define MXT_T9_XSIZE 3
+#define MXT_T9_YSIZE 4
#define MXT_T9_ORIENT 9
#define MXT_T9_RANGE 18
@@ -113,17 +121,37 @@ struct t7_config {
#define MXT_T9_DETECT (1 << 7)
struct t9_range {
- u16 x;
- u16 y;
+ __le16 x;
+ __le16 y;
} __packed;
/* MXT_TOUCH_MULTI_T9 orient */
#define MXT_T9_ORIENT_SWITCH (1 << 0)
+#define MXT_T9_ORIENT_INVERTX (1 << 1)
+#define MXT_T9_ORIENT_INVERTY (1 << 2)
/* MXT_SPT_COMMSCONFIG_T18 */
#define MXT_COMMS_CTRL 0
#define MXT_COMMS_CMD 1
+/* MXT_DEBUG_DIAGNOSTIC_T37 */
+#define MXT_DIAGNOSTIC_PAGEUP 0x01
+#define MXT_DIAGNOSTIC_DELTAS 0x10
+#define MXT_DIAGNOSTIC_REFS 0x11
+#define MXT_DIAGNOSTIC_SIZE 128
+
+#define MXT_FAMILY_1386 160
+#define MXT1386_COLUMNS 3
+#define MXT1386_PAGES_PER_COLUMN 8
+
+struct t37_debug {
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+ u8 mode;
+ u8 page;
+ u8 data[MXT_DIAGNOSTIC_SIZE];
+#endif
+};
+
/* Define for MXT_GEN_COMMAND_T6 */
#define MXT_BOOT_VALUE 0xa5
#define MXT_RESET_VALUE 0x01
@@ -133,10 +161,14 @@ struct t9_range {
#define MXT_T100_CTRL 0
#define MXT_T100_CFG1 1
#define MXT_T100_TCHAUX 3
+#define MXT_T100_XSIZE 9
#define MXT_T100_XRANGE 13
+#define MXT_T100_YSIZE 20
#define MXT_T100_YRANGE 24
#define MXT_T100_CFG_SWITCHXY BIT(5)
+#define MXT_T100_CFG_INVERTY BIT(6)
+#define MXT_T100_CFG_INVERTX BIT(7)
#define MXT_T100_TCHAUX_VECT BIT(0)
#define MXT_T100_TCHAUX_AMPL BIT(1)
@@ -161,6 +193,8 @@ enum t100_type {
/* Delay times */
#define MXT_BACKUP_TIME 50 /* msec */
+#define MXT_RESET_GPIO_TIME 20 /* msec */
+#define MXT_RESET_INVALID_CHG 100 /* msec */
#define MXT_RESET_TIME 200 /* msec */
#define MXT_RESET_TIMEOUT 3000 /* msec */
#define MXT_CRC_TIMEOUT 1000 /* msec */
@@ -205,6 +239,37 @@ struct mxt_object {
u8 num_report_ids;
} __packed;
+struct mxt_dbg {
+ u16 t37_address;
+ u16 diag_cmd_address;
+ struct t37_debug *t37_buf;
+ unsigned int t37_pages;
+ unsigned int t37_nodes;
+
+ struct v4l2_device v4l2;
+ struct v4l2_pix_format format;
+ struct video_device vdev;
+ struct vb2_queue queue;
+ struct mutex lock;
+ int input;
+};
+
+enum v4l_dbg_inputs {
+ MXT_V4L_INPUT_DELTAS,
+ MXT_V4L_INPUT_REFS,
+ MXT_V4L_INPUT_MAX,
+};
+
+static const struct v4l2_file_operations mxt_video_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .unlocked_ioctl = video_ioctl2,
+ .read = vb2_fop_read,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
@@ -216,6 +281,11 @@ struct mxt_data {
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
+ bool invertx;
+ bool inverty;
+ bool xy_switch;
+ u8 xsize;
+ u8 ysize;
bool in_bootloader;
u16 mem_size;
u8 t100_aux_ampl;
@@ -232,6 +302,8 @@ struct mxt_data {
u8 num_touchids;
u8 multitouch;
struct t7_config t7_cfg;
+ struct mxt_dbg dbg;
+ struct gpio_desc *reset_gpio;
/* Cached parameters from object table */
u16 T5_address;
@@ -256,6 +328,11 @@ struct mxt_data {
struct completion crc_completion;
};
+struct mxt_vb2_buffer {
+ struct vb2_buffer vb;
+ struct list_head list;
+};
+
static size_t mxt_obj_size(const struct mxt_object *obj)
{
return obj->size_minus_one + 1;
@@ -277,6 +354,7 @@ static bool mxt_object_readable(unsigned int type)
case MXT_TOUCH_KEYARRAY_T15:
case MXT_TOUCH_PROXIMITY_T23:
case MXT_TOUCH_PROXKEY_T52:
+ case MXT_TOUCH_MULTITOUCHSCREEN_T100:
case MXT_PROCI_GRIPFACE_T20:
case MXT_PROCG_NOISE_T22:
case MXT_PROCI_ONETOUCH_T24:
@@ -1092,6 +1170,19 @@ static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
return 0;
}
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+ int error;
+
+ enable_irq(data->irq);
+
+ error = mxt_process_messages_until_invalid(data);
+ if (error)
+ return error;
+
+ return 0;
+}
+
static int mxt_soft_reset(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
@@ -1108,9 +1199,9 @@ static int mxt_soft_reset(struct mxt_data *data)
return ret;
/* Ignore CHG line for 100ms after reset */
- msleep(100);
+ msleep(MXT_RESET_INVALID_CHG);
- enable_irq(data->irq);
+ mxt_acquire_irq(data);
ret = mxt_wait_for_completion(data, &data->reset_completion,
MXT_RESET_TIMEOUT);
@@ -1465,19 +1556,6 @@ release_mem:
return ret;
}
-static int mxt_acquire_irq(struct mxt_data *data)
-{
- int error;
-
- enable_irq(data->irq);
-
- error = mxt_process_messages_until_invalid(data);
- if (error)
- return error;
-
- return 0;
-}
-
static int mxt_get_info(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -1502,6 +1580,11 @@ static void mxt_free_input_device(struct mxt_data *data)
static void mxt_free_object_table(struct mxt_data *data)
{
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+ video_unregister_device(&data->dbg.vdev);
+ v4l2_device_unregister(&data->dbg.v4l2);
+#endif
+
kfree(data->object_table);
data->object_table = NULL;
kfree(data->msg_buf);
@@ -1661,13 +1744,25 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
return -EINVAL;
error = __mxt_read_reg(client,
+ object->start_address + MXT_T9_XSIZE,
+ sizeof(data->xsize), &data->xsize);
+ if (error)
+ return error;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T9_YSIZE,
+ sizeof(data->ysize), &data->ysize);
+ if (error)
+ return error;
+
+ error = __mxt_read_reg(client,
object->start_address + MXT_T9_RANGE,
sizeof(range), &range);
if (error)
return error;
- le16_to_cpus(&range.x);
- le16_to_cpus(&range.y);
+ data->max_x = get_unaligned_le16(&range.x);
+ data->max_y = get_unaligned_le16(&range.y);
error = __mxt_read_reg(client,
object->start_address + MXT_T9_ORIENT,
@@ -1675,23 +1770,9 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
if (error)
return error;
- /* Handle default values */
- if (range.x == 0)
- range.x = 1023;
-
- if (range.y == 0)
- range.y = 1023;
-
- if (orient & MXT_T9_ORIENT_SWITCH) {
- data->max_x = range.y;
- data->max_y = range.x;
- } else {
- data->max_x = range.x;
- data->max_y = range.y;
- }
-
- dev_dbg(&client->dev,
- "Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+ data->xy_switch = orient & MXT_T9_ORIENT_SWITCH;
+ data->invertx = orient & MXT_T9_ORIENT_INVERTX;
+ data->inverty = orient & MXT_T9_ORIENT_INVERTY;
return 0;
}
@@ -1709,13 +1790,14 @@ static int mxt_read_t100_config(struct mxt_data *data)
if (!object)
return -EINVAL;
+ /* read touchscreen dimensions */
error = __mxt_read_reg(client,
object->start_address + MXT_T100_XRANGE,
sizeof(range_x), &range_x);
if (error)
return error;
- le16_to_cpus(&range_x);
+ data->max_x = get_unaligned_le16(&range_x);
error = __mxt_read_reg(client,
object->start_address + MXT_T100_YRANGE,
@@ -1723,36 +1805,38 @@ static int mxt_read_t100_config(struct mxt_data *data)
if (error)
return error;
- le16_to_cpus(&range_y);
+ data->max_y = get_unaligned_le16(&range_y);
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_XSIZE,
+ sizeof(data->xsize), &data->xsize);
+ if (error)
+ return error;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_YSIZE,
+ sizeof(data->ysize), &data->ysize);
+ if (error)
+ return error;
+ /* read orientation config */
error = __mxt_read_reg(client,
object->start_address + MXT_T100_CFG1,
1, &cfg);
if (error)
return error;
+ data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY;
+ data->invertx = cfg & MXT_T100_CFG_INVERTX;
+ data->inverty = cfg & MXT_T100_CFG_INVERTY;
+
+ /* allocate aux bytes */
error = __mxt_read_reg(client,
object->start_address + MXT_T100_TCHAUX,
1, &tchaux);
if (error)
return error;
- /* Handle default values */
- if (range_x == 0)
- range_x = 1023;
-
- if (range_y == 0)
- range_y = 1023;
-
- if (cfg & MXT_T100_CFG_SWITCHXY) {
- data->max_x = range_y;
- data->max_y = range_x;
- } else {
- data->max_x = range_x;
- data->max_y = range_y;
- }
-
- /* allocate aux bytes */
aux = 6;
if (tchaux & MXT_T100_TCHAUX_VECT)
@@ -1768,9 +1852,6 @@ static int mxt_read_t100_config(struct mxt_data *data)
"T100 aux mappings vect:%u ampl:%u area:%u\n",
data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
- dev_info(&client->dev,
- "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
-
return 0;
}
@@ -1829,6 +1910,19 @@ static int mxt_initialize_input_device(struct mxt_data *data)
return -EINVAL;
}
+ /* Handle default values and orientation switch */
+ if (data->max_x == 0)
+ data->max_x = 1023;
+
+ if (data->max_y == 0)
+ data->max_y = 1023;
+
+ if (data->xy_switch)
+ swap(data->max_x, data->max_y);
+
+ dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+ /* Register input device */
input_dev = input_allocate_device();
if (!input_dev) {
dev_err(dev, "Failed to allocate memory\n");
@@ -2060,6 +2154,420 @@ recheck:
return 0;
}
+#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
+static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x,
+ unsigned int y)
+{
+ struct mxt_info *info = &data->info;
+ struct mxt_dbg *dbg = &data->dbg;
+ unsigned int ofs, page;
+ unsigned int col = 0;
+ unsigned int col_width;
+
+ if (info->family_id == MXT_FAMILY_1386) {
+ col_width = info->matrix_ysize / MXT1386_COLUMNS;
+ col = y / col_width;
+ y = y % col_width;
+ } else {
+ col_width = info->matrix_ysize;
+ }
+
+ ofs = (y + (x * col_width)) * sizeof(u16);
+ page = ofs / MXT_DIAGNOSTIC_SIZE;
+ ofs %= MXT_DIAGNOSTIC_SIZE;
+
+ if (info->family_id == MXT_FAMILY_1386)
+ page += col * MXT1386_PAGES_PER_COLUMN;
+
+ return get_unaligned_le16(&dbg->t37_buf[page].data[ofs]);
+}
+
+static int mxt_convert_debug_pages(struct mxt_data *data, u16 *outbuf)
+{
+ struct mxt_dbg *dbg = &data->dbg;
+ unsigned int x = 0;
+ unsigned int y = 0;
+ unsigned int i, rx, ry;
+
+ for (i = 0; i < dbg->t37_nodes; i++) {
+ /* Handle orientation */
+ rx = data->xy_switch ? y : x;
+ ry = data->xy_switch ? x : y;
+ rx = data->invertx ? (data->xsize - 1 - rx) : rx;
+ ry = data->inverty ? (data->ysize - 1 - ry) : ry;
+
+ outbuf[i] = mxt_get_debug_value(data, rx, ry);
+
+ /* Next value */
+ if (++x >= (data->xy_switch ? data->ysize : data->xsize)) {
+ x = 0;
+ y++;
+ }
+ }
+
+ return 0;
+}
+
+static int mxt_read_diagnostic_debug(struct mxt_data *data, u8 mode,
+ u16 *outbuf)
+{
+ struct mxt_dbg *dbg = &data->dbg;
+ int retries = 0;
+ int page;
+ int ret;
+ u8 cmd = mode;
+ struct t37_debug *p;
+ u8 cmd_poll;
+
+ for (page = 0; page < dbg->t37_pages; page++) {
+ p = dbg->t37_buf + page;
+
+ ret = mxt_write_reg(data->client, dbg->diag_cmd_address,
+ cmd);
+ if (ret)
+ return ret;
+
+ retries = 0;
+ msleep(20);
+wait_cmd:
+ /* Read back command byte */
+ ret = __mxt_read_reg(data->client, dbg->diag_cmd_address,
+ sizeof(cmd_poll), &cmd_poll);
+ if (ret)
+ return ret;
+
+ /* Field is cleared once the command has been processed */
+ if (cmd_poll) {
+ if (retries++ > 100)
+ return -EINVAL;
+
+ msleep(20);
+ goto wait_cmd;
+ }
+
+ /* Read T37 page */
+ ret = __mxt_read_reg(data->client, dbg->t37_address,
+ sizeof(struct t37_debug), p);
+ if (ret)
+ return ret;
+
+ if (p->mode != mode || p->page != page) {
+ dev_err(&data->client->dev, "T37 page mismatch\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(&data->client->dev, "%s page:%d retries:%d\n",
+ __func__, page, retries);
+
+ /* For remaining pages, write PAGEUP rather than mode */
+ cmd = MXT_DIAGNOSTIC_PAGEUP;
+ }
+
+ return mxt_convert_debug_pages(data, outbuf);
+}
+
+static int mxt_queue_setup(struct vb2_queue *q,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], struct device *alloc_devs[])
+{
+ struct mxt_data *data = q->drv_priv;
+ size_t size = data->dbg.t37_nodes * sizeof(u16);
+
+ if (*nplanes)
+ return sizes[0] < size ? -EINVAL : 0;
+
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static void mxt_buffer_queue(struct vb2_buffer *vb)
+{
+ struct mxt_data *data = vb2_get_drv_priv(vb->vb2_queue);
+ u16 *ptr;
+ int ret;
+ u8 mode;
+
+ ptr = vb2_plane_vaddr(vb, 0);
+ if (!ptr) {
+ dev_err(&data->client->dev, "Error acquiring frame ptr\n");
+ goto fault;
+ }
+
+ switch (data->dbg.input) {
+ case MXT_V4L_INPUT_DELTAS:
+ default:
+ mode = MXT_DIAGNOSTIC_DELTAS;
+ break;
+
+ case MXT_V4L_INPUT_REFS:
+ mode = MXT_DIAGNOSTIC_REFS;
+ break;
+ }
+
+ ret = mxt_read_diagnostic_debug(data, mode, ptr);
+ if (ret)
+ goto fault;
+
+ vb2_set_plane_payload(vb, 0, data->dbg.t37_nodes * sizeof(u16));
+ vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+ return;
+
+fault:
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+}
+
+/* V4L2 structures */
+static const struct vb2_ops mxt_queue_ops = {
+ .queue_setup = mxt_queue_setup,
+ .buf_queue = mxt_buffer_queue,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static const struct vb2_queue mxt_queue = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
+ .buf_struct_size = sizeof(struct mxt_vb2_buffer),
+ .ops = &mxt_queue_ops,
+ .mem_ops = &vb2_vmalloc_memops,
+ .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
+ .min_buffers_needed = 1,
+};
+
+static int mxt_vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct mxt_data *data = video_drvdata(file);
+
+ strlcpy(cap->driver, "atmel_mxt_ts", sizeof(cap->driver));
+ strlcpy(cap->card, "atmel_mxt_ts touch", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "I2C:%s", dev_name(&data->client->dev));
+ return 0;
+}
+
+static int mxt_vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ if (i->index >= MXT_V4L_INPUT_MAX)
+ return -EINVAL;
+
+ i->type = V4L2_INPUT_TYPE_TOUCH;
+
+ switch (i->index) {
+ case MXT_V4L_INPUT_REFS:
+ strlcpy(i->name, "Mutual Capacitance References",
+ sizeof(i->name));
+ break;
+ case MXT_V4L_INPUT_DELTAS:
+ strlcpy(i->name, "Mutual Capacitance Deltas", sizeof(i->name));
+ break;
+ }
+
+ return 0;
+}
+
+static int mxt_set_input(struct mxt_data *data, unsigned int i)
+{
+ struct v4l2_pix_format *f = &data->dbg.format;
+
+ if (i >= MXT_V4L_INPUT_MAX)
+ return -EINVAL;
+
+ if (i == MXT_V4L_INPUT_DELTAS)
+ f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+ else
+ f->pixelformat = V4L2_TCH_FMT_TU16;
+
+ f->width = data->xy_switch ? data->ysize : data->xsize;
+ f->height = data->xy_switch ? data->xsize : data->ysize;
+ f->field = V4L2_FIELD_NONE;
+ f->colorspace = V4L2_COLORSPACE_RAW;
+ f->bytesperline = f->width * sizeof(u16);
+ f->sizeimage = f->width * f->height * sizeof(u16);
+
+ data->dbg.input = i;
+
+ return 0;
+}
+
+static int mxt_vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ return mxt_set_input(video_drvdata(file), i);
+}
+
+static int mxt_vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct mxt_data *data = video_drvdata(file);
+
+ *i = data->dbg.input;
+
+ return 0;
+}
+
+static int mxt_vidioc_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mxt_data *data = video_drvdata(file);
+
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ f->fmt.pix = data->dbg.format;
+
+ return 0;
+}
+
+static int mxt_vidioc_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *fmt)
+{
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (fmt->index) {
+ case 0:
+ fmt->pixelformat = V4L2_TCH_FMT_TU16;
+ break;
+
+ case 1:
+ fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mxt_vidioc_g_parm(struct file *file, void *fh,
+ struct v4l2_streamparm *a)
+{
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ a->parm.capture.readbuffers = 1;
+ a->parm.capture.timeperframe.numerator = 1;
+ a->parm.capture.timeperframe.denominator = 10;
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops mxt_video_ioctl_ops = {
+ .vidioc_querycap = mxt_vidioc_querycap,
+
+ .vidioc_enum_fmt_vid_cap = mxt_vidioc_enum_fmt,
+ .vidioc_s_fmt_vid_cap = mxt_vidioc_fmt,
+ .vidioc_g_fmt_vid_cap = mxt_vidioc_fmt,
+ .vidioc_try_fmt_vid_cap = mxt_vidioc_fmt,
+ .vidioc_g_parm = mxt_vidioc_g_parm,
+
+ .vidioc_enum_input = mxt_vidioc_enum_input,
+ .vidioc_g_input = mxt_vidioc_g_input,
+ .vidioc_s_input = mxt_vidioc_s_input,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+static const struct video_device mxt_video_device = {
+ .name = "Atmel maxTouch",
+ .fops = &mxt_video_fops,
+ .ioctl_ops = &mxt_video_ioctl_ops,
+ .release = video_device_release_empty,
+ .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TOUCH |
+ V4L2_CAP_READWRITE | V4L2_CAP_STREAMING,
+};
+
+static void mxt_debug_init(struct mxt_data *data)
+{
+ struct mxt_info *info = &data->info;
+ struct mxt_dbg *dbg = &data->dbg;
+ struct mxt_object *object;
+ int error;
+
+ object = mxt_get_object(data, MXT_GEN_COMMAND_T6);
+ if (!object)
+ goto error;
+
+ dbg->diag_cmd_address = object->start_address + MXT_COMMAND_DIAGNOSTIC;
+
+ object = mxt_get_object(data, MXT_DEBUG_DIAGNOSTIC_T37);
+ if (!object)
+ goto error;
+
+ if (mxt_obj_size(object) != sizeof(struct t37_debug)) {
+ dev_warn(&data->client->dev, "Bad T37 size");
+ goto error;
+ }
+
+ dbg->t37_address = object->start_address;
+
+ /* Calculate size of data and allocate buffer */
+ dbg->t37_nodes = data->xsize * data->ysize;
+
+ if (info->family_id == MXT_FAMILY_1386)
+ dbg->t37_pages = MXT1386_COLUMNS * MXT1386_PAGES_PER_COLUMN;
+ else
+ dbg->t37_pages = DIV_ROUND_UP(data->xsize *
+ info->matrix_ysize *
+ sizeof(u16),
+ sizeof(dbg->t37_buf->data));
+
+ dbg->t37_buf = devm_kmalloc_array(&data->client->dev, dbg->t37_pages,
+ sizeof(struct t37_debug), GFP_KERNEL);
+ if (!dbg->t37_buf)
+ goto error;
+
+ /* init channel to zero */
+ mxt_set_input(data, 0);
+
+ /* register video device */
+ snprintf(dbg->v4l2.name, sizeof(dbg->v4l2.name), "%s", "atmel_mxt_ts");
+ error = v4l2_device_register(&data->client->dev, &dbg->v4l2);
+ if (error)
+ goto error;
+
+ /* initialize the queue */
+ mutex_init(&dbg->lock);
+ dbg->queue = mxt_queue;
+ dbg->queue.drv_priv = data;
+ dbg->queue.lock = &dbg->lock;
+ dbg->queue.dev = &data->client->dev;
+
+ error = vb2_queue_init(&dbg->queue);
+ if (error)
+ goto error_unreg_v4l2;
+
+ dbg->vdev = mxt_video_device;
+ dbg->vdev.v4l2_dev = &dbg->v4l2;
+ dbg->vdev.lock = &dbg->lock;
+ dbg->vdev.vfl_dir = VFL_DIR_RX;
+ dbg->vdev.queue = &dbg->queue;
+ video_set_drvdata(&dbg->vdev, data);
+
+ error = video_register_device(&dbg->vdev, VFL_TYPE_TOUCH, -1);
+ if (error)
+ goto error_unreg_v4l2;
+
+ return;
+
+error_unreg_v4l2:
+ v4l2_device_unregister(&dbg->v4l2);
+error:
+ dev_warn(&data->client->dev, "Error initializing T37\n");
+}
+#else
+static void mxt_debug_init(struct mxt_data *data)
+{
+}
+#endif
+
static int mxt_configure_objects(struct mxt_data *data,
const struct firmware *cfg)
{
@@ -2087,6 +2595,8 @@ static int mxt_configure_objects(struct mxt_data *data,
dev_warn(dev, "No touch object detected\n");
}
+ mxt_debug_init(data);
+
dev_info(dev,
"Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
info->family_id, info->variant_id, info->version >> 4,
@@ -2621,11 +3131,9 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
- if (!data) {
- dev_err(&client->dev, "Failed to allocate memory\n");
+ data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
+ if (!data)
return -ENOMEM;
- }
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
client->adapter->nr, client->addr);
@@ -2639,19 +3147,34 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);
- error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags | IRQF_ONESHOT,
- client->name, data);
+ data->reset_gpio = devm_gpiod_get_optional(&client->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(data->reset_gpio)) {
+ error = PTR_ERR(data->reset_gpio);
+ dev_err(&client->dev, "Failed to get reset gpio: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, mxt_interrupt,
+ pdata->irqflags | IRQF_ONESHOT,
+ client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
- goto err_free_mem;
+ return error;
}
disable_irq(client->irq);
+ if (data->reset_gpio) {
+ msleep(MXT_RESET_GPIO_TIME);
+ gpiod_set_value(data->reset_gpio, 1);
+ msleep(MXT_RESET_INVALID_CHG);
+ }
+
error = mxt_initialize(data);
if (error)
- goto err_free_irq;
+ return error;
error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
if (error) {
@@ -2665,10 +3188,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
err_free_object:
mxt_free_input_device(data);
mxt_free_object_table(data);
-err_free_irq:
- free_irq(client->irq, data);
-err_free_mem:
- kfree(data);
return error;
}
@@ -2676,11 +3195,10 @@ static int mxt_remove(struct i2c_client *client)
{
struct mxt_data *data = i2c_get_clientdata(client);
+ disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
- free_irq(data->irq, data);
mxt_free_input_device(data);
mxt_free_object_table(data);
- kfree(data);
return 0;
}
diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c
index 5d4903a402cc..51e86f80cdba 100644
--- a/drivers/input/touchscreen/colibri-vf50-ts.c
+++ b/drivers/input/touchscreen/colibri-vf50-ts.c
@@ -100,6 +100,8 @@ static void vf50_ts_enable_touch_detection(struct vf50_touch_device *vf50_ts)
/* Wait for the pull-up to be stable on high */
usleep_range(COLI_PULLUP_MIN_DELAY_US, COLI_PULLUP_MAX_DELAY_US);
+
+ enable_irq(vf50_ts->pen_irq);
}
/*
@@ -112,6 +114,8 @@ static irqreturn_t vf50_ts_irq_bh(int irq, void *private)
int val_x, val_y, val_z1, val_z2, val_p = 0;
bool discard_val_on_start = true;
+ disable_irq_nosync(vf50_ts->pen_irq);
+
/* Disable the touch detection plates */
gpiod_set_value(vf50_ts->gpio_ym, 0);
@@ -202,7 +206,8 @@ static irqreturn_t vf50_ts_irq_bh(int irq, void *private)
input_report_key(vf50_ts->ts_input, BTN_TOUCH, 0);
input_sync(vf50_ts->ts_input);
- vf50_ts_enable_touch_detection(vf50_ts);
+ if (!vf50_ts->stop_touchscreen)
+ vf50_ts_enable_touch_detection(vf50_ts);
return IRQ_HANDLED;
}
@@ -353,6 +358,7 @@ static int vf50_ts_probe(struct platform_device *pdev)
if (touchdev->pen_irq < 0)
return touchdev->pen_irq;
+ touchdev->stop_touchscreen = true;
error = devm_request_threaded_irq(dev, touchdev->pen_irq,
NULL, vf50_ts_irq_bh, IRQF_ONESHOT,
"vf50 touch", touchdev);
diff --git a/drivers/input/touchscreen/fusion_F0710A.c b/drivers/input/touchscreen/fusion_F0710A.c
new file mode 100644
index 000000000000..862725b1332c
--- /dev/null
+++ b/drivers/input/touchscreen/fusion_F0710A.c
@@ -0,0 +1,507 @@
+/*
+ * "fusion_F0710A" touchscreen driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/irq.h>
+#include <linux/gpio.h>
+#include <linux/input/fusion_F0710A.h>
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+
+#include "fusion_F0710A.h"
+
+#define DRV_NAME "fusion_F0710A"
+#define MAX_TOUCHES 2
+
+static struct fusion_F0710A_data fusion_F0710A;
+
+static unsigned short normal_i2c[] = { fusion_F0710A_I2C_SLAVE_ADDR, I2C_CLIENT_END };
+
+static int fusion_F0710A_write_u8(u8 addr, u8 data)
+{
+ return i2c_smbus_write_byte_data(fusion_F0710A.client, addr, data);
+}
+
+static int fusion_F0710A_read_u8(u8 addr)
+{
+ return i2c_smbus_read_byte_data(fusion_F0710A.client, addr);
+}
+
+static int fusion_F0710A_read_block(u8 addr, u8 len, u8 *data)
+{
+ u8 msgbuf0[1] = { addr };
+ u16 slave = fusion_F0710A.client->addr;
+ u16 flags = fusion_F0710A.client->flags;
+ struct i2c_msg msg[2] = { { slave, flags, 1, msgbuf0 },
+ { slave, flags | I2C_M_RD, len, data }
+ };
+
+ return i2c_transfer(fusion_F0710A.client->adapter, msg, ARRAY_SIZE(msg));
+}
+
+static int fusion_F0710A_register_input(void)
+{
+ int ret;
+ struct input_dev *dev;
+
+ dev = fusion_F0710A.input = input_allocate_device();
+ if (dev == NULL)
+ return -ENOMEM;
+
+ dev->name = "fusion_F0710A";
+
+ set_bit(EV_KEY, dev->evbit);
+ set_bit(EV_ABS, dev->evbit);
+ set_bit(EV_SYN, dev->evbit);
+ set_bit(BTN_TOUCH, dev->keybit);
+
+ input_mt_init_slots(dev, MAX_TOUCHES, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, 0, fusion_F0710A.info.xres-1, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, fusion_F0710A.info.yres-1, 0, 0);
+ input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ input_set_abs_params(dev, ABS_X, 0, fusion_F0710A.info.xres-1, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, fusion_F0710A.info.yres-1, 0, 0);
+ input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
+
+ ret = input_register_device(dev);
+ if (ret < 0)
+ goto bail1;
+
+ return 0;
+
+bail1:
+ input_free_device(dev);
+ return ret;
+}
+
+static void fusion_F0710A_reset(void)
+{
+ /* Generate a 0 => 1 edge explicitly, and wait for startup... */
+ gpio_set_value(fusion_F0710A.gpio_reset, 0);
+ msleep(10);
+ gpio_set_value(fusion_F0710A.gpio_reset, 1);
+ /* Wait for startup (up to 125ms according to datasheet) */
+ msleep(125);
+}
+
+#define WC_RETRY_COUNT 3
+static int fusion_F0710A_write_complete(void)
+{
+ int ret, i;
+
+ for (i = 0; i < WC_RETRY_COUNT; i++)
+ {
+ ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0);
+ if (!ret)
+ break;
+
+ dev_warn(&fusion_F0710A.client->dev,
+ "Write complete failed(%d): %d. Resetting controller...\n", i, ret);
+ fusion_F0710A_reset();
+ }
+
+ return ret;
+}
+
+#define DATA_START fusion_F0710A_DATA_INFO
+#define DATA_END fusion_F0710A_SEC_TIDTS
+#define DATA_LEN (DATA_END - DATA_START + 1)
+#define DATA_OFF(x) ((x) - DATA_START)
+
+static int fusion_F0710A_read_sensor(void)
+{
+ int ret;
+ u8 data[DATA_LEN];
+
+#define DATA(x) (data[DATA_OFF(x)])
+ /* To ensure data coherency, read the sensor with a single transaction. */
+ ret = fusion_F0710A_read_block(DATA_START, DATA_LEN, data);
+ if (ret < 0) {
+ dev_err(&fusion_F0710A.client->dev,
+ "Read block failed: %d\n", ret);
+
+ return ret;
+ }
+
+ fusion_F0710A.f_num = DATA(fusion_F0710A_DATA_INFO)&0x03;
+
+ fusion_F0710A.y1 = DATA(fusion_F0710A_POS_X1_HI) << 8;
+ fusion_F0710A.y1 |= DATA(fusion_F0710A_POS_X1_LO);
+ fusion_F0710A.x1 = DATA(fusion_F0710A_POS_Y1_HI) << 8;
+ fusion_F0710A.x1 |= DATA(fusion_F0710A_POS_Y1_LO);
+ fusion_F0710A.z1 = DATA(fusion_F0710A_FIR_PRESS);
+ fusion_F0710A.tip1 = DATA(fusion_F0710A_FIR_TIDTS)&0x0f;
+ fusion_F0710A.tid1 = (DATA(fusion_F0710A_FIR_TIDTS)&0xf0)>>4;
+
+ fusion_F0710A.y2 = DATA(fusion_F0710A_POS_X2_HI) << 8;
+ fusion_F0710A.y2 |= DATA(fusion_F0710A_POS_X2_LO);
+ fusion_F0710A.x2 = DATA(fusion_F0710A_POS_Y2_HI) << 8;
+ fusion_F0710A.x2 |= DATA(fusion_F0710A_POS_Y2_LO);
+ fusion_F0710A.z2 = DATA(fusion_F0710A_SEC_PRESS);
+ fusion_F0710A.tip2 = DATA(fusion_F0710A_SEC_TIDTS)&0x0f;
+ fusion_F0710A.tid2 =(DATA(fusion_F0710A_SEC_TIDTS)&0xf0)>>4;
+#undef DATA
+
+ return 0;
+}
+
+#define val_cut_max(x, max, reverse) \
+do \
+{ \
+ if(x > max) \
+ x = max; \
+ if(reverse) \
+ x = (max) - (x); \
+} \
+while(0)
+
+static void fusion_F0710A_wq(struct work_struct *work)
+{
+ struct input_dev *dev = fusion_F0710A.input;
+
+ if (fusion_F0710A_read_sensor() < 0)
+ goto restore_irq;
+
+#ifdef DEBUG
+ printk(KERN_DEBUG "tip1, tid1, x1, y1, z1 (%x,%x,%d,%d,%d); tip2, tid2, x2, y2, z2 (%x,%x,%d,%d,%d)\n",
+ fusion_F0710A.tip1, fusion_F0710A.tid1, fusion_F0710A.x1, fusion_F0710A.y1, fusion_F0710A.z1,
+ fusion_F0710A.tip2, fusion_F0710A.tid2, fusion_F0710A.x2, fusion_F0710A.y2, fusion_F0710A.z2);
+#endif /* DEBUG */
+
+ val_cut_max(fusion_F0710A.x1, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse);
+ val_cut_max(fusion_F0710A.y1, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse);
+ val_cut_max(fusion_F0710A.x2, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse);
+ val_cut_max(fusion_F0710A.y2, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse);
+
+ if (fusion_F0710A.tid1) {
+ input_mt_slot(dev, fusion_F0710A.tid1 - 1);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip1);
+ if (fusion_F0710A.tip1) {
+ input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x1);
+ input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y1);
+ input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z1);
+ }
+ }
+
+ if (fusion_F0710A.tid2) {
+ input_mt_slot(dev, fusion_F0710A.tid2 - 1);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip2);
+ if (fusion_F0710A.tip2) {
+ input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x2);
+ input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y2);
+ input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z2);
+ }
+ }
+
+ input_mt_report_pointer_emulation(dev, false);
+ input_sync(dev);
+
+restore_irq:
+ enable_irq(fusion_F0710A.client->irq);
+
+ /* Clear fusion_F0710A interrupt */
+ fusion_F0710A_write_complete();
+}
+
+static DECLARE_WORK(fusion_F0710A_work, fusion_F0710A_wq);
+
+static irqreturn_t fusion_F0710A_interrupt(int irq, void *dev_id)
+{
+ disable_irq_nosync(fusion_F0710A.client->irq);
+
+ queue_work(fusion_F0710A.workq, &fusion_F0710A_work);
+
+ return IRQ_HANDLED;
+}
+
+const static u8* g_ver_product[4] = {
+ "10Z8", "70Z7", "43Z6", ""
+};
+
+static int of_fusion_F0710A_get_pins(struct device_node *np,
+ unsigned int *int_pin, unsigned int *reset_pin)
+{
+ if (of_gpio_count(np) < 2)
+ return -ENODEV;
+
+ *int_pin = of_get_gpio(np, 0);
+ *reset_pin = of_get_gpio(np, 1);
+
+ if (!gpio_is_valid(*int_pin) || !gpio_is_valid(*reset_pin)) {
+ pr_err("%s: invalid GPIO pins, int=%d/reset=%d\n",
+ np->full_name, *int_pin, *reset_pin);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int fusion_F0710A_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data;
+ int ret;
+ u8 ver_product, ver_id;
+ u32 version;
+
+ if (np != NULL) {
+ pdata = i2c->dev.platform_data =
+ devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
+ if (pdata == NULL) {
+ dev_err(&i2c->dev, "No platform data for Fusion driver\n");
+ return -ENODEV;
+ }
+ /* the dtb did the pinmuxing for us */
+ pdata->pinmux_fusion_pins = NULL;
+ ret = of_fusion_F0710A_get_pins(i2c->dev.of_node,
+ &pdata->gpio_int, &pdata->gpio_reset);
+ if (ret)
+ return ret;
+ } else if (pdata == NULL) {
+ dev_err(&i2c->dev, "No platform data for Fusion driver\n");
+ return -ENODEV;
+ }
+
+ /* Request pinmuxing, if necessary */
+ if (pdata->pinmux_fusion_pins != NULL) {
+ ret = pdata->pinmux_fusion_pins();
+ if (ret < 0) {
+ dev_err(&i2c->dev, "muxing GPIOs failed\n");
+ return -ENODEV;
+ }
+ }
+
+ if ((gpio_request(pdata->gpio_int, "Fusion pen down interrupt") == 0) &&
+ (gpio_direction_input(pdata->gpio_int) == 0)) {
+ gpio_export(pdata->gpio_int, 0);
+ } else {
+ dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion pen down\n");
+ return -ENODEV;
+ }
+
+ if ((gpio_request(pdata->gpio_reset, "Fusion reset") == 0) &&
+ (gpio_direction_output(pdata->gpio_reset, 1) == 0)) {
+ fusion_F0710A.gpio_reset = pdata->gpio_reset;
+ fusion_F0710A_reset();
+ gpio_export(pdata->gpio_reset, 0);
+ } else {
+ dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion reset\n");
+ ret = -ENODEV;
+ goto bail0;
+ }
+
+ /* Use Pen Down GPIO as sampling interrupt */
+ i2c->irq = gpio_to_irq(pdata->gpio_int);
+ irq_set_irq_type(i2c->irq, IRQ_TYPE_LEVEL_HIGH);
+
+ if (!i2c->irq) {
+ dev_err(&i2c->dev, "fusion_F0710A irq < 0 \n");
+ ret = -ENOMEM;
+ goto bail1;
+ }
+
+ /* Attach the I2C client */
+ fusion_F0710A.client = i2c;
+ i2c_set_clientdata(i2c, &fusion_F0710A);
+
+ dev_info(&i2c->dev, "Touchscreen registered with bus id (%d) with slave address 0x%x\n",
+ i2c_adapter_id(fusion_F0710A.client->adapter), fusion_F0710A.client->addr);
+
+ /* Read out a lot of registers */
+ ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO_LO);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "query failed: %d\n", ret);
+ goto bail1;
+ }
+
+ ver_product = (((u8)ret) & 0xc0) >> 6;
+ version = (10 + ((((u32)ret)&0x30) >> 4)) * 100000;
+ version += (((u32)ret)&0xf) * 1000;
+ /* Read out a lot of registers */
+ ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "query failed: %d\n", ret);
+ goto bail1;
+ }
+
+ ver_id = ((u8)(ret) & 0x6) >> 1;
+ version += ((((u32)ret) & 0xf8) >> 3) * 10;
+ version += (((u32)ret) & 0x1) + 1; /* 0 is build 1, 1 is build 2 */
+ dev_info(&i2c->dev, "version product %s(%d)\n", g_ver_product[ver_product], ver_product);
+ dev_info(&i2c->dev, "version id %s(%d)\n", ver_id ? "1.4" : "1.0", ver_id);
+ dev_info(&i2c->dev, "version series (%d)\n", version);
+
+ switch(ver_product)
+ {
+ case fusion_F0710A_VIESION_07: /* 7 inch */
+ fusion_F0710A.info.xres = fusion_F0710A07_XMAX;
+ fusion_F0710A.info.yres = fusion_F0710A07_YMAX;
+ fusion_F0710A.info.xy_reverse = fusion_F0710A07_REV;
+ break;
+ case fusion_F0710A_VIESION_43: /* 4.3 inch */
+ fusion_F0710A.info.xres = fusion_F0710A43_XMAX;
+ fusion_F0710A.info.yres = fusion_F0710A43_YMAX;
+ fusion_F0710A.info.xy_reverse = fusion_F0710A43_REV;
+ break;
+ default: /* fusion_F0710A_VIESION_10 10 inch */
+ fusion_F0710A.info.xres = fusion_F0710A10_XMAX;
+ fusion_F0710A.info.yres = fusion_F0710A10_YMAX;
+ fusion_F0710A.info.xy_reverse = fusion_F0710A10_REV;
+ break;
+ }
+
+ /* Register the input device. */
+ ret = fusion_F0710A_register_input();
+ if (ret < 0) {
+ dev_err(&i2c->dev, "can't register input: %d\n", ret);
+ goto bail1;
+ }
+
+ /* Create a worker thread */
+ fusion_F0710A.workq = create_singlethread_workqueue(DRV_NAME);
+ if (fusion_F0710A.workq == NULL) {
+ dev_err(&i2c->dev, "can't create work queue\n");
+ ret = -ENOMEM;
+ goto bail2;
+ }
+
+ /* Register for the interrupt and enable it. Our handler will
+ * start getting invoked after this call.
+ */
+ ret = request_irq(i2c->irq, fusion_F0710A_interrupt, IRQF_TRIGGER_RISING,
+ i2c->name, &fusion_F0710A);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "can't get irq %d: %d\n", i2c->irq, ret);
+ goto bail3;
+ }
+
+ /* clear the irq first */
+ ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Clear irq failed: %d\n", ret);
+ goto bail4;
+ }
+
+ return 0;
+
+bail4:
+ free_irq(i2c->irq, &fusion_F0710A);
+
+bail3:
+ destroy_workqueue(fusion_F0710A.workq);
+ fusion_F0710A.workq = NULL;
+
+bail2:
+ input_unregister_device(fusion_F0710A.input);
+bail1:
+ gpio_free(pdata->gpio_reset);
+bail0:
+ gpio_free(pdata->gpio_int);
+
+ return ret;
+}
+
+static int __maybe_unused fusion_F0710A_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ disable_irq(i2c->irq);
+ flush_workqueue(fusion_F0710A.workq);
+
+ return 0;
+}
+
+static int __maybe_unused fusion_F0710A_resume(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ enable_irq(i2c->irq);
+
+ return 0;
+}
+
+static int fusion_F0710A_remove(struct i2c_client *i2c)
+{
+ struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data;
+
+ gpio_free(pdata->gpio_int);
+ gpio_free(pdata->gpio_reset);
+ destroy_workqueue(fusion_F0710A.workq);
+ free_irq(i2c->irq, &fusion_F0710A);
+ input_unregister_device(fusion_F0710A.input);
+ i2c_set_clientdata(i2c, NULL);
+
+ dev_info(&i2c->dev, "driver removed\n");
+
+ return 0;
+}
+
+static struct i2c_device_id fusion_F0710A_id[] = {
+ {"fusion_F0710A", 0},
+ {},
+};
+
+static const struct of_device_id fusion_F0710A_dt_ids[] = {
+ {
+ .compatible = "touchrevolution,fusion-f0710a",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, fusion_F0710A_dt_ids);
+
+static const struct dev_pm_ops fusion_F0710A_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(fusion_F0710A_suspend, fusion_F0710A_resume)
+};
+
+static struct i2c_driver fusion_F0710A_i2c_drv = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .pm = &fusion_F0710A_pm_ops,
+ .of_match_table = fusion_F0710A_dt_ids,
+ },
+ .probe = fusion_F0710A_probe,
+ .remove = fusion_F0710A_remove,
+ .id_table = fusion_F0710A_id,
+ .address_list = normal_i2c,
+};
+
+static int __init fusion_F0710A_init( void )
+{
+ int ret;
+
+ memset(&fusion_F0710A, 0, sizeof(fusion_F0710A));
+
+ /* Probe for fusion_F0710A on I2C. */
+ ret = i2c_add_driver(&fusion_F0710A_i2c_drv);
+ if (ret < 0) {
+ printk(KERN_WARNING DRV_NAME " can't add i2c driver: %d\n", ret);
+ }
+
+ return ret;
+}
+
+static void __exit fusion_F0710A_exit( void )
+{
+ i2c_del_driver(&fusion_F0710A_i2c_drv);
+}
+
+module_init(fusion_F0710A_init);
+module_exit(fusion_F0710A_exit);
+
+MODULE_DESCRIPTION("fusion_F0710A Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/fusion_F0710A.h b/drivers/input/touchscreen/fusion_F0710A.h
new file mode 100644
index 000000000000..6805332d23e5
--- /dev/null
+++ b/drivers/input/touchscreen/fusion_F0710A.h
@@ -0,0 +1,87 @@
+/*
+ * "fusion_F0710A" touchscreen driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* I2C slave address */
+#define fusion_F0710A_I2C_SLAVE_ADDR 0x10
+
+/* I2C registers */
+#define fusion_F0710A_DATA_INFO 0x00
+
+/* First Point*/
+#define fusion_F0710A_POS_X1_HI 0x01 /* 16-bit register, MSB */
+#define fusion_F0710A_POS_X1_LO 0x02 /* 16-bit register, LSB */
+#define fusion_F0710A_POS_Y1_HI 0x03 /* 16-bit register, MSB */
+#define fusion_F0710A_POS_Y1_LO 0x04 /* 16-bit register, LSB */
+#define fusion_F0710A_FIR_PRESS 0X05
+#define fusion_F0710A_FIR_TIDTS 0X06
+
+/* Second Point */
+#define fusion_F0710A_POS_X2_HI 0x07 /* 16-bit register, MSB */
+#define fusion_F0710A_POS_X2_LO 0x08 /* 16-bit register, LSB */
+#define fusion_F0710A_POS_Y2_HI 0x09 /* 16-bit register, MSB */
+#define fusion_F0710A_POS_Y2_LO 0x0A /* 16-bit register, LSB */
+#define fusion_F0710A_SEC_PRESS 0x0B
+#define fusion_F0710A_SEC_TIDTS 0x0C
+
+#define fusion_F0710A_VIESION_INFO_LO 0X0E
+#define fusion_F0710A_VIESION_INFO 0X0F
+
+#define fusion_F0710A_RESET 0x10
+#define fusion_F0710A_SCAN_COMPLETE 0x11
+
+
+#define fusion_F0710A_VIESION_10 0
+#define fusion_F0710A_VIESION_07 1
+#define fusion_F0710A_VIESION_43 2
+
+/* fusion_F0710A 10 inch panel */
+#define fusion_F0710A10_XMAX 2275
+#define fusion_F0710A10_YMAX 1275
+#define fusion_F0710A10_REV 1
+
+/* fusion_F0710A 7 inch panel */
+#define fusion_F0710A07_XMAX 1500
+#define fusion_F0710A07_YMAX 900
+#define fusion_F0710A07_REV 0
+
+/* fusion_F0710A 4.3 inch panel */
+#define fusion_F0710A43_XMAX 900
+#define fusion_F0710A43_YMAX 500
+#define fusion_F0710A43_REV 0
+
+#define fusion_F0710A_SAVE_PT1 0x1
+#define fusion_F0710A_SAVE_PT2 0x2
+
+
+
+/* fusion_F0710A touch screen information */
+struct fusion_F0710A_info {
+ int xres; /* x resolution */
+ int yres; /* y resolution */
+ int xy_reverse; /* if need reverse in the x,y value x=xres-1-x, y=yres-1-y*/
+};
+
+struct fusion_F0710A_data {
+ struct fusion_F0710A_info info;
+ struct i2c_client *client;
+ struct workqueue_struct *workq;
+ struct input_dev *input;
+ int gpio_reset;
+ u16 x1;
+ u16 y1;
+ u8 z1;
+ u8 tip1;
+ u8 tid1;
+ u16 x2;
+ u16 y2;
+ u8 z2;
+ u8 tip2;
+ u8 tid2;
+ u8 f_num;
+ u8 save_points;
+};
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index ddf694b9fffc..a235ed9f9bc8 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -280,7 +280,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
goto err_remove_sysfs;
}
- device_init_wakeup(&client->dev, 1);
+ device_init_wakeup(dev, 1);
dev_dbg(dev,
"ILI210x initialized (IRQ: %d), firmware version %d.%d.%d",
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4b961ad9f0b5..bb91336bcae8 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -465,7 +465,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
if (error)
return error;
} else {
- dev_err(&client->dev, "platform data not defined\n");
+ dev_err(dev, "platform data not defined\n");
return -EINVAL;
}
@@ -487,7 +487,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
input->id.bustype = BUS_I2C;
input->open = pixcir_input_open;
input->close = pixcir_input_close;
- input->dev.parent = &client->dev;
+ input->dev.parent = dev;
if (pdata) {
input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
index ba6024f93469..9546da7cafe2 100644
--- a/drivers/input/touchscreen/rohm_bu21023.c
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -1189,8 +1189,7 @@ static int rohm_bu21023_i2c_probe(struct i2c_client *client,
error = devm_add_action(dev, rohm_ts_remove_sysfs_group, dev);
if (error) {
rohm_ts_remove_sysfs_group(dev);
- dev_err(&client->dev,
- "Failed to add sysfs cleanup action: %d\n",
+ dev_err(dev, "Failed to add sysfs cleanup action: %d\n",
error);
return error;
}
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index a4a103e1d11b..41d58e88cc8a 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -250,7 +250,7 @@ static int s3c2410ts_probe(struct platform_device *pdev)
ts.dev = dev;
- info = dev_get_platdata(&pdev->dev);
+ info = dev_get_platdata(dev);
if (!info) {
dev_err(dev, "no platform data, cannot attach\n");
return -EINVAL;
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 177f78f6e6d6..b0a94c3fc75e 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
+obj-$(CONFIG_SOC_VF610) += irq-vf610-gpc.o
obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
obj-$(CONFIG_BCM7038_L1_IRQ) += irq-bcm7038-l1.o
obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
diff --git a/drivers/irqchip/irq-vf610-gpc.c b/drivers/irqchip/irq-vf610-gpc.c
new file mode 100644
index 000000000000..105a6606e425
--- /dev/null
+++ b/drivers/irqchip/irq-vf610-gpc.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2015 Toradex AG
+ * Author: Stefan Agner <stefan@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * The GPC (General Power Controller) irqchip driver takes care of the
+ * interrupt wakeup functionality.
+ *
+ * o All peripheral interrupts of the Vybrid SoC can be used as wakeup
+ * source from STOP mode. In LPSTOP mode however, the GPC is unpowered
+ * too and cannot be used to as a wakeup source. The WKPU (Wakeup Unit)
+ * is responsible for wakeups from LPSTOP modes.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#define IMR_NUM 4
+#define VF610_GPC_IMR1 0x044
+#define VF610_GPC_MAX_IRQS (IMR_NUM * 32)
+
+static void __iomem *gpc_base;
+
+static int vf610_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned int idx = d->hwirq / 32;
+ void __iomem *reg_imr = gpc_base + VF610_GPC_IMR1 + (idx * 4);
+ u32 mask = 1 << d->hwirq % 32;
+
+ if (on)
+ writel_relaxed(readl_relaxed(reg_imr) & ~mask, reg_imr);
+ else
+ writel_relaxed(readl_relaxed(reg_imr) | mask, reg_imr);
+
+ /*
+ * Do *not* call into the parent, as the GIC doesn't have any
+ * wake-up facility...
+ */
+ return 0;
+}
+
+static struct irq_chip vf610_gpc_chip = {
+ .name = "vf610-gpc",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_enable = irq_chip_enable_parent,
+ .irq_disable = irq_chip_disable_parent,
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_wake = vf610_gpc_irq_set_wake,
+};
+
+static int vf610_gpc_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i;
+ irq_hw_number_t hwirq;
+ struct irq_fwspec *fwspec = arg;
+ struct irq_fwspec parent_fwspec;
+
+ if (!irq_domain_get_of_node(domain->parent))
+ return -EINVAL;
+
+ if (fwspec->param_count != 2)
+ return -EINVAL;
+
+ hwirq = fwspec->param[0];
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &vf610_gpc_chip, NULL);
+
+ parent_fwspec = *fwspec;
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
+}
+
+static int vf610_gpc_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ if (WARN_ON(fwspec->param_count < 2))
+ return -EINVAL;
+ *hwirq = fwspec->param[0];
+ *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+
+static const struct irq_domain_ops gpc_irq_domain_ops = {
+ .translate = vf610_gpc_domain_translate,
+ .alloc = vf610_gpc_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init vf610_gpc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *domain_parent;
+ int i;
+
+ domain_parent = irq_find_host(parent);
+ if (!domain_parent) {
+ pr_err("vf610_gpc: interrupt-parent not found\n");
+ return -EINVAL;
+ }
+
+ gpc_base = of_io_request_and_map(node, 0, "gpc");
+ if (WARN_ON(!gpc_base))
+ return -ENOMEM;
+
+ domain = irq_domain_add_hierarchy(domain_parent, 0, VF610_GPC_MAX_IRQS,
+ node, &gpc_irq_domain_ops, NULL);
+ if (!domain) {
+ iounmap(gpc_base);
+ return -ENOMEM;
+ }
+
+ /* Initially mask all interrupts for wakeup */
+ for (i = 0; i < IMR_NUM; i++)
+ writel_relaxed(~0, gpc_base + VF610_GPC_IMR1 + i * 4);
+
+ return 0;
+}
+IRQCHIP_DECLARE(vf610_gpc, "fsl,vf610-gpc", vf610_gpc_of_init);
diff --git a/drivers/irqchip/irq-vf610-mscm-ir.c b/drivers/irqchip/irq-vf610-mscm-ir.c
index 56b5e3cb9de2..a36f2ea74185 100644
--- a/drivers/irqchip/irq-vf610-mscm-ir.c
+++ b/drivers/irqchip/irq-vf610-mscm-ir.c
@@ -23,8 +23,10 @@
* variants of Vybrid.
*/
+#include <linux/bitops.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
@@ -32,25 +34,48 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#define MSCM_CPxNUM 0x4
+#define MSCM_IRCP0IR 0x0
+#define MSCM_IRCP1IR 0x4
+#define MSCM_IRCPnIR(n) ((n) * 0x4 + MSCM_IRCP0IR)
+#define MSCM_IRCPnIR_INT(n) (0x1 << (n))
+#define MSCM_IRCPGIR 0x20
+
+#define MSCM_INTID_MASK 0x3
+#define MSCM_INTID(n) ((n) & MSCM_INTID_MASK)
+#define MSCM_CPUTL(n) (((n) == 0 ? 1 : 2) << 16)
+
#define MSCM_IRSPRC(n) (0x80 + 2 * (n))
#define MSCM_IRSPRC_CPEN_MASK 0x3
#define MSCM_IRSPRC_NUM 112
+#define MSCM_CPU2CPU_NUM 4
+
struct vf610_mscm_ir_chip_data {
void __iomem *mscm_ir_base;
- u16 cpu_mask;
+ u16 cpu_id;
u16 saved_irsprc[MSCM_IRSPRC_NUM];
bool is_nvic;
+ struct device_node *cpu2cpu_node;
+};
+
+struct mscm_cpu2cpu_irq_data {
+ int intid;
+ int irq;
+ irq_handler_t handler;
+ void *priv;
};
static struct vf610_mscm_ir_chip_data *mscm_ir_data;
+static struct mscm_cpu2cpu_irq_data cpu2cpu_irq_data[MSCM_CPU2CPU_NUM];
+
static inline void vf610_mscm_ir_save(struct vf610_mscm_ir_chip_data *data)
{
int i;
@@ -94,11 +119,8 @@ static void vf610_mscm_ir_enable(struct irq_data *data)
u16 irsprc;
irsprc = readw_relaxed(chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
- irsprc &= MSCM_IRSPRC_CPEN_MASK;
- WARN_ON(irsprc & ~chip_data->cpu_mask);
-
- writew_relaxed(chip_data->cpu_mask,
+ writew_relaxed(irsprc | BIT(chip_data->cpu_id),
chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
irq_chip_enable_parent(data);
@@ -108,8 +130,11 @@ static void vf610_mscm_ir_disable(struct irq_data *data)
{
irq_hw_number_t hwirq = data->hwirq;
struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+ u16 irsprc;
- writew_relaxed(0x0, chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+ irsprc = readw_relaxed(chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+ writew_relaxed(irsprc & ~BIT(chip_data->cpu_id),
+ chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
irq_chip_disable_parent(data);
}
@@ -179,6 +204,90 @@ static const struct irq_domain_ops mscm_irq_domain_ops = {
.free = irq_domain_free_irqs_common,
};
+static irqreturn_t mscm_cpu2cpu_irq_handler(int irq, void *dev_id)
+{
+ irqreturn_t ret;
+ struct mscm_cpu2cpu_irq_data *data = dev_id;
+ void __iomem *mscm_base = mscm_ir_data->mscm_ir_base;
+ int cpu_id = mscm_ir_data->cpu_id;
+
+
+ ret = data->handler(data->intid, data->priv);
+ if (ret == IRQ_HANDLED)
+ writel(MSCM_IRCPnIR_INT(data->intid), mscm_base + MSCM_IRCPnIR(cpu_id));
+
+ return ret;
+}
+
+int mscm_request_cpu2cpu_irq(unsigned int intid, irq_handler_t handler,
+ const char *name, void *priv)
+{
+ int irq;
+ struct mscm_cpu2cpu_irq_data *data;
+
+ if (intid >= MSCM_CPU2CPU_NUM)
+ return -EINVAL;
+
+ irq = of_irq_get(mscm_ir_data->cpu2cpu_node, intid);
+ if (irq < 0)
+ return irq;
+
+ data = &cpu2cpu_irq_data[intid];
+ data->intid = intid;
+ data->irq = irq;
+ data->handler = handler;
+ data->priv = priv;
+
+ return request_irq(irq, mscm_cpu2cpu_irq_handler, 0, name, data);
+}
+EXPORT_SYMBOL(mscm_request_cpu2cpu_irq);
+
+void mscm_free_cpu2cpu_irq(unsigned int intid, void *priv)
+{
+ struct mscm_cpu2cpu_irq_data *data;
+
+ if (intid >= MSCM_CPU2CPU_NUM)
+ return;
+
+ data = &cpu2cpu_irq_data[intid];
+
+ if (data->irq < 0)
+ return;
+
+ free_irq(data->irq, data);
+}
+EXPORT_SYMBOL(mscm_free_cpu2cpu_irq);
+
+void mscm_trigger_cpu2cpu_irq(unsigned int intid, int cpuid)
+{
+ void __iomem *mscm_base = mscm_ir_data->mscm_ir_base;
+
+ writel(MSCM_INTID(intid) | MSCM_CPUTL(cpuid), mscm_base + MSCM_IRCPGIR);
+}
+EXPORT_SYMBOL(mscm_trigger_cpu2cpu_irq);
+
+void mscm_enable_cpu2cpu_irq(unsigned int intid)
+{
+ struct mscm_cpu2cpu_irq_data *data = &cpu2cpu_irq_data[intid];
+
+ if (intid >= MSCM_CPU2CPU_NUM)
+ return;
+
+ enable_irq(data->irq);
+}
+EXPORT_SYMBOL(mscm_enable_cpu2cpu_irq);
+
+void mscm_disable_cpu2cpu_irq(unsigned int intid)
+{
+ struct mscm_cpu2cpu_irq_data *data = &cpu2cpu_irq_data[intid];
+
+ if (intid >= MSCM_CPU2CPU_NUM)
+ return;
+
+ disable_irq(data->irq);
+}
+EXPORT_SYMBOL(mscm_disable_cpu2cpu_irq);
+
static int __init vf610_mscm_ir_of_init(struct device_node *node,
struct device_node *parent)
{
@@ -210,8 +319,7 @@ static int __init vf610_mscm_ir_of_init(struct device_node *node,
goto out_unmap;
}
- regmap_read(mscm_cp_regmap, MSCM_CPxNUM, &cpuid);
- mscm_ir_data->cpu_mask = 0x1 << cpuid;
+ mscm_ir_data->cpu_id = regmap_read(mscm_cp_regmap, MSCM_CPxNUM, &cpuid);
domain = irq_domain_add_hierarchy(domain_parent, 0,
MSCM_IRSPRC_NUM, node,
@@ -227,6 +335,8 @@ static int __init vf610_mscm_ir_of_init(struct device_node *node,
cpu_pm_register_notifier(&mscm_ir_notifier_block);
+ mscm_ir_data->cpu2cpu_node = of_get_child_by_name(node, "cpu2cpu");
+
return 0;
out_unmap:
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 176bf0fa2685..34d71de1bc1c 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -116,6 +116,36 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)
}
EXPORT_SYMBOL_GPL(syscon_node_to_regmap);
+int syscon_regmap_read_from_offset(struct device_node *np,
+ const char *s, unsigned int *val)
+{
+ struct of_phandle_args pargs;
+ struct regmap *regmap;
+ int offset;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ ret = of_parse_phandle_with_fixed_args(np, s, 1, 0, &pargs);
+ if (ret)
+ return ret;
+
+ regmap = syscon_node_to_regmap(pargs.np);
+ if (IS_ERR(regmap)) {
+ of_node_put(pargs.np);
+ return PTR_ERR(regmap);
+ }
+
+ offset = pargs.args[0];
+ of_node_put(pargs.np);
+
+ ret = regmap_read(regmap, offset, val);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_read_from_offset);
+
struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
{
struct device_node *syscon_np;
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 8d838779fd1b..31e95f9c1c93 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1004,6 +1004,10 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
+ if (!of_property_read_u32(np, "bus-width", &boarddata->max_bus_width)
+ && boarddata->max_bus_width == 1)
+ host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
/* call to generic mmc_of_parse to support additional capabilities */
ret = mmc_of_parse(host->mmc);
if (ret)
@@ -1293,7 +1297,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops sdhci_esdhc_pmops = {
- SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_rpm_suspend, sdhci_pltfm_rpm_resume)
SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
sdhci_esdhc_runtime_resume, NULL)
};
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 87fb5ea8ebe7..714ffb5a6929 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -31,6 +31,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pm_runtime.h>
#ifdef CONFIG_PPC
#include <asm/machdep.h>
#endif
@@ -252,6 +253,41 @@ const struct dev_pm_ops sdhci_pltfm_pmops = {
.resume = sdhci_pltfm_resume,
};
EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops);
+
+int sdhci_pltfm_rpm_suspend(struct device *dev)
+{
+ int ret;
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+ ret = sdhci_suspend_host(host);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ if (ret)
+ return ret;
+
+ return pm_runtime_force_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_suspend);
+
+int sdhci_pltfm_rpm_resume(struct device *dev)
+{
+ int ret;
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ ret = pm_runtime_force_resume(dev);
+
+ if (ret)
+ return ret;
+
+ pm_runtime_get_sync(dev);
+ ret = sdhci_resume_host(host);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_resume);
#endif /* CONFIG_PM */
static int __init sdhci_pltfm_drv_init(void)
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 04bc2481e5c3..ac5f6ea9b55f 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -114,6 +114,8 @@ static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host)
extern int sdhci_pltfm_suspend(struct device *dev);
extern int sdhci_pltfm_resume(struct device *dev);
extern const struct dev_pm_ops sdhci_pltfm_pmops;
+extern int sdhci_pltfm_rpm_suspend(struct device *dev);
+extern int sdhci_pltfm_rpm_resume(struct device *dev);
#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)
#else
#define SDHCI_PLTFM_PMOPS NULL
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index bee32a9d9876..c7df0aebb2b8 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -30,6 +30,15 @@ config FEC
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
+config FSL_L2_SWITCH
+ tristate "Ethernet switch controller (Freescale Vybrid platform)"
+ depends on (SOC_VF610)
+ help
+ Say Y here if you want to use the built-in ethernet switch
+ controller on Vybrid processors.
+ The Integrated Ethernet switch engine is compatible with
+ 10/100 MAC-NET core.
+
config FEC_MPC52xx
tristate "FEC MPC52xx driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 71debd1c18c9..d5d24d182919 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_FSL_L2_SWITCH) += fsl_l2_switch.o
fec-objs :=fec_main.o fec_ptp.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 9c608211fcfd..1d2707525ee9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -103,7 +103,9 @@ static struct platform_device_id fec_devtype[] = {
FEC_QUIRK_HAS_RACC,
}, {
.name = "mvf600-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+ .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_VLAN |
+ FEC_QUIRK_HAS_CSUM,
}, {
.name = "imx6sx-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
@@ -170,6 +172,7 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
/* FEC receive acceleration */
#define FEC_RACC_IPDIS (1 << 1)
#define FEC_RACC_PRODIS (1 << 2)
+#define FEC_RACC_SHIFT16 BIT(7)
#define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS)
/*
@@ -975,9 +978,11 @@ fec_restart(struct net_device *ndev)
#if !defined(CONFIG_M5272)
if (fep->quirks & FEC_QUIRK_HAS_RACC) {
- /* set RX checksum */
val = readl(fep->hwp + FEC_RACC);
+ /* align IP header */
+ val |= FEC_RACC_SHIFT16;
if (fep->csum_flags & FLAG_RX_CSUM_ENABLED)
+ /* set RX checksum */
val |= FEC_RACC_OPTIONS;
else
val &= ~FEC_RACC_OPTIONS;
@@ -1463,6 +1468,12 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
prefetch(skb->data - NET_IP_ALIGN);
skb_put(skb, pkt_len - 4);
data = skb->data;
+
+#if !defined(CONFIG_M5272)
+ if (fep->quirks & FEC_QUIRK_HAS_RACC)
+ data = skb_pull_inline(skb, 2);
+#endif
+
if (!is_copybreak && need_swap)
swap_buffer(data, pkt_len);
diff --git a/drivers/net/ethernet/freescale/fsl_l2_switch.c b/drivers/net/ethernet/freescale/fsl_l2_switch.c
new file mode 100644
index 000000000000..af38259b65ae
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fsl_l2_switch.c
@@ -0,0 +1,912 @@
+/*
+ * L2 switch Controller (Ethernet switch) driver
+ * for Freescale M5441x and Vybrid.
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * Alison Wang (b18965@freescale.com)
+ * Jason Jin (Jason.jin@freescale.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/bitops.h>
+#include <linux/phy.h>
+#include <linux/syscalls.h>
+#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+
+#include "fsl_l2_switch.h"
+
+/* switch ports status */
+struct port_status ports_link_status;
+
+static unsigned char macaddr[ETH_ALEN];
+module_param_array(macaddr, byte, NULL, 0);
+MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
+
+static void switch_hw_init(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+
+ /* Initialize MAC 0/1 */
+ writel(FSL_FEC_RCR_MAX_FL(1522) | FSL_FEC_RCR_RMII_MODE
+ | FSL_FEC_RCR_PROM | FSL_FEC_RCR_MII_MODE
+ | FSL_FEC_RCR_MII_MODE, fep->enetbase + FSL_FEC_RCR0);
+ writel(FSL_FEC_RCR_MAX_FL(1522) | FSL_FEC_RCR_RMII_MODE
+ | FSL_FEC_RCR_PROM | FSL_FEC_RCR_MII_MODE
+ | FSL_FEC_RCR_MII_MODE, fep->enetbase + FSL_FEC_RCR1);
+
+ writel(FSL_FEC_TCR_FDEN, fep->enetbase + FSL_FEC_TCR0);
+ writel(FSL_FEC_TCR_FDEN, fep->enetbase + FSL_FEC_TCR1);
+
+ /* Set the station address for the ENET Adapter */
+ writel(dev->dev_addr[3] |
+ dev->dev_addr[2] << 8 |
+ dev->dev_addr[1] << 16 |
+ dev->dev_addr[0] << 24, fep->enetbase + FSL_FEC_PALR0);
+ writel((dev->dev_addr[5] << 16) |
+ (dev->dev_addr[4] << 24),
+ fep->enetbase + FSL_FEC_PAUR0);
+ writel(dev->dev_addr[3] |
+ dev->dev_addr[2] << 8 |
+ dev->dev_addr[1] << 16 |
+ dev->dev_addr[0] << 24, fep->enetbase + FSL_FEC_PALR1);
+ writel((dev->dev_addr[5] << 16) |
+ (dev->dev_addr[4] << 24),
+ fep->enetbase + FSL_FEC_PAUR1);
+
+ writel(FEC_ENET_TXF | FEC_ENET_RXF, fep->enetbase + FSL_FEC_EIMR0);
+ writel(FEC_ENET_TXF | FEC_ENET_RXF, fep->enetbase + FSL_FEC_EIMR1);
+
+ writel(FSL_FEC_ECR_ETHER_EN |
+ (0x1 << 8), fep->enetbase + FSL_FEC_ECR0);
+ writel(FSL_FEC_ECR_ETHER_EN |
+ (0x1 << 8), fep->enetbase + FSL_FEC_ECR1);
+ udelay(20);
+}
+
+/* Set a MAC change in hardware.*/
+static void switch_get_mac_address(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+ unsigned char *iap, tmpaddr[ETH_ALEN];
+
+ iap = macaddr;
+
+ if (!is_valid_ether_addr(iap)) {
+ struct device_node *np = fep->pdev->dev.of_node;
+
+ if (np) {
+ const char *mac = of_get_mac_address(np);
+
+ if (mac)
+ iap = (unsigned char *) mac;
+ }
+ }
+
+ if (!is_valid_ether_addr(iap)) {
+ *((__be32 *)&tmpaddr[0]) =
+ cpu_to_be32(readl(fep->enetbase + FSL_FEC_PALR0));
+ *((__be16 *)&tmpaddr[4]) =
+ cpu_to_be16(readl(fep->enetbase + FSL_FEC_PAUR0) >> 16);
+ iap = &tmpaddr[0];
+ }
+
+ if (!is_valid_ether_addr(iap)) {
+ /* Report it and use a random ethernet address instead */
+ netdev_err(dev, "Invalid MAC address: %pM\n", iap);
+ eth_hw_addr_random(dev);
+ netdev_info(dev, "Using random MAC address: %pM\n",
+ dev->dev_addr);
+ return;
+ }
+
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+ /* Adjust MAC if using macaddr */
+ if (iap == macaddr)
+ dev->dev_addr[ETH_ALEN - 1] =
+ macaddr[ETH_ALEN - 1] + fep->dev_id;
+}
+
+/* This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
+static void switch_restart(struct net_device *dev, int duplex)
+{
+ struct switch_enet_private *fep;
+ int i;
+
+ fep = netdev_priv(dev);
+
+ /* Whack a reset. We should wait for this.*/
+ writel(1, fep->enetbase + FSL_FEC_ECR0);
+ writel(1, fep->enetbase + FSL_FEC_ECR1);
+ udelay(10);
+
+ writel(FSL_ESW_MODE_SW_RST, fep->membase + FEC_ESW_MODE);
+ udelay(10);
+ writel(FSL_ESW_MODE_STATRST, fep->membase + FEC_ESW_MODE);
+ writel(FSL_ESW_MODE_SW_EN, fep->membase + FEC_ESW_MODE);
+
+ /* Enable transmit/receive on all ports */
+ writel(0xffffffff, fep->membase + FEC_ESW_PER);
+
+ /* Management port configuration,
+ * make port 0 as management port
+ */
+ writel(0, fep->membase + FEC_ESW_BMPC);
+
+ /* Clear any outstanding interrupt.*/
+ writel(0xffffffff, fep->membase + FEC_ESW_ISR);
+
+ switch_hw_init(dev);
+
+ /* Set station address.*/
+ switch_get_mac_address(dev);
+
+ writel(0, fep->membase + FEC_ESW_IMR);
+ udelay(10);
+
+ /* Set maximum receive buffer size. */
+ writel(PKT_MAXBLR_SIZE, fep->membase + FEC_ESW_MRBR);
+
+ /* Set receive and transmit descriptor base. */
+ writel(fep->bd_dma, fep->membase + FEC_ESW_RDSR);
+ writel((unsigned long)fep->bd_dma +
+ sizeof(struct bufdesc) * RX_RING_SIZE,
+ fep->membase + FEC_ESW_TDSR);
+
+ fep->cur_tx = fep->tx_bd_base;
+ fep->dirty_tx = fep->cur_tx;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* Reset SKB transmit buffers. */
+ fep->skb_cur = 0;
+ fep->skb_dirty = 0;
+ for (i = 0; i <= TX_RING_MOD_MASK; i++) {
+ if (fep->tx_skbuff[i] != NULL) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ }
+
+ /* Clear any outstanding interrupt.*/
+ writel(0xffffffff, fep->membase + FEC_ESW_ISR);
+ writel(FSL_ESW_IMR_RXF | FSL_ESW_IMR_TXF, fep->membase + FEC_ESW_IMR);
+}
+
+static int switch_enet_clk_enable(struct net_device *ndev, bool enable)
+{
+ struct switch_enet_private *fep = netdev_priv(ndev);
+ int ret;
+
+ if (enable) {
+ ret = clk_prepare_enable(fep->clk_esw);
+ if (ret)
+ goto failed_clk_esw;
+
+ ret = clk_prepare_enable(fep->clk_enet);
+ if (ret)
+ goto failed_clk_enet;
+
+ ret = clk_prepare_enable(fep->clk_enet0);
+ if (ret)
+ goto failed_clk_enet0;
+
+ ret = clk_prepare_enable(fep->clk_enet1);
+ if (ret)
+ goto failed_clk_enet1;
+ } else {
+ clk_disable_unprepare(fep->clk_esw);
+ clk_disable_unprepare(fep->clk_enet);
+ clk_disable_unprepare(fep->clk_enet0);
+ clk_disable_unprepare(fep->clk_enet1);
+ }
+
+ return 0;
+
+failed_clk_esw:
+ clk_disable_unprepare(fep->clk_esw);
+failed_clk_enet:
+ clk_disable_unprepare(fep->clk_enet);
+failed_clk_enet0:
+ clk_disable_unprepare(fep->clk_enet0);
+failed_clk_enet1:
+ clk_disable_unprepare(fep->clk_enet1);
+
+ return ret;
+}
+
+static void switch_enet_free_buffers(struct net_device *ndev)
+{
+ struct switch_enet_private *fep = netdev_priv(ndev);
+ int i;
+ struct sk_buff *skb;
+ cbd_t *bdp;
+
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ skb = fep->rx_skbuff[i];
+
+ if (bdp->cbd_bufaddr)
+ dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
+ SWITCH_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+ if (skb)
+ dev_kfree_skb(skb);
+ bdp++;
+ }
+
+ bdp = fep->tx_bd_base;
+ for (i = 0; i < TX_RING_SIZE; i++)
+ kfree(fep->tx_bounce[i]);
+}
+
+static int switch_alloc_buffers(struct net_device *ndev)
+{
+ struct switch_enet_private *fep = netdev_priv(ndev);
+ int i;
+ struct sk_buff *skb;
+ cbd_t *bdp;
+
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ skb = dev_alloc_skb(SWITCH_ENET_RX_FRSIZE);
+ if (!skb) {
+ switch_enet_free_buffers(ndev);
+ return -ENOMEM;
+ }
+ fep->rx_skbuff[i] = skb;
+
+ bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data,
+ SWITCH_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap. */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ bdp = fep->tx_bd_base;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ fep->tx_bounce[i] = kmalloc(SWITCH_ENET_TX_FRSIZE, GFP_KERNEL);
+
+ bdp->cbd_sc = 0;
+ bdp->cbd_bufaddr = 0;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap. */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ return 0;
+}
+
+static int switch_enet_open(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+ unsigned long tmp = 0;
+
+ /* no phy, go full duplex, it's most likely a hub chip */
+ switch_restart(dev, 1);
+
+ /* if the fec open firstly, we need to do nothing
+ * otherwise, we need to restart the FEC
+ */
+ if (fep->sequence_done == 0)
+ switch_restart(dev, 1);
+ else
+ fep->sequence_done = 0;
+
+ writel(0x70007, fep->membase + FEC_ESW_PER);
+ writel(FSL_ESW_DBCR_P0 | FSL_ESW_DBCR_P1 | FSL_ESW_DBCR_P2,
+ fep->membase + FEC_ESW_DBCR);
+ writel(FSL_ESW_DMCR_P0 | FSL_ESW_DMCR_P1 | FSL_ESW_DMCR_P2,
+ fep->membase + FEC_ESW_DMCR);
+
+ /* Disable port learning */
+ tmp = readl(fep->membase + FEC_ESW_BKLR);
+ tmp &= ~FSL_ESW_BKLR_LDX;
+ writel(tmp, fep->membase + FEC_ESW_BKLR);
+
+ netif_start_queue(dev);
+
+ /* And last, enable the receive processing. */
+ writel(FSL_ESW_RDAR_R_DES_ACTIVE, fep->membase + FEC_ESW_RDAR);
+
+ fep->opened = 1;
+
+ return 0;
+}
+
+static int switch_enet_close(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+
+ /* Don't know what to do yet. */
+ fep->opened = 0;
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static netdev_tx_t switch_enet_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct switch_enet_private *fep;
+ cbd_t *bdp;
+ unsigned short status;
+ unsigned long flags;
+ void *bufaddr;
+
+ fep = netdev_priv(dev);
+
+ spin_lock_irqsave(&fep->hw_lock, flags);
+ /* Fill in a Tx ring entry */
+ bdp = fep->cur_tx;
+
+ status = bdp->cbd_sc;
+
+ /* Clear all of the status flags */
+ status &= ~BD_ENET_TX_STATS;
+
+ /* Set buffer length and buffer pointer. */
+ bufaddr = skb->data;
+ bdp->cbd_datlen = skb->len;
+
+ /* On some FEC implementations data must be aligned on
+ * 4-byte boundaries. Use bounce buffers to copy data
+ * and get it aligned. Ugh.
+ */
+ if (((unsigned long)bufaddr) & 0xf) {
+ unsigned int index;
+ index = bdp - fep->tx_bd_base;
+
+ memcpy(fep->tx_bounce[index],
+ (void *)skb->data, bdp->cbd_datlen);
+ bufaddr = fep->tx_bounce[index];
+ }
+
+ /* Save skb pointer. */
+ fep->tx_skbuff[fep->skb_cur] = skb;
+
+ dev->stats.tx_bytes += skb->len;
+ fep->skb_cur = (fep->skb_cur + 1) & TX_RING_MOD_MASK;
+
+ /* Push the data cache so the CPM does not get stale memory
+ * data.
+ */
+ bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
+ SWITCH_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+
+ /* Send it on its way. Tell FEC it's ready, interrupt when done,
+ * it's the last BD of the frame, and to put the CRC on the end.
+ */
+ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ bdp->cbd_sc = status;
+
+ dev->trans_start = jiffies;
+
+ /* Trigger transmission start */
+ writel(FSL_ESW_TDAR_X_DES_ACTIVE, fep->membase + FEC_ESW_TDAR);
+
+ /* If this was the last BD in the ring,
+ * start at the beginning again.
+ */
+ if (status & BD_ENET_TX_WRAP)
+ bdp = fep->tx_bd_base;
+ else
+ bdp++;
+
+ if (bdp == fep->dirty_tx) {
+ fep->tx_full = 1;
+ netif_stop_queue(dev);
+ netdev_err(dev, "%s: net stop\n", __func__);
+ }
+
+ fep->cur_tx = (cbd_t *)bdp;
+
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static void switch_timeout(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+
+ netdev_err(dev, "%s: transmit timed out.\n", dev->name);
+ dev->stats.tx_errors++;
+ switch_restart(dev, fep->full_duplex);
+ netif_wake_queue(dev);
+}
+
+static const struct net_device_ops switch_netdev_ops = {
+ .ndo_open = switch_enet_open,
+ .ndo_stop = switch_enet_close,
+ .ndo_start_xmit = switch_enet_start_xmit,
+ .ndo_tx_timeout = switch_timeout,
+};
+
+/* Initialize the FEC Ethernet. */
+static int switch_enet_init(struct net_device *dev)
+{
+ struct switch_enet_private *fep = netdev_priv(dev);
+ cbd_t *cbd_base = NULL;
+ int ret = 0;
+
+ /* Allocate memory for buffer descriptors. */
+ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
+ GFP_KERNEL);
+ if (!cbd_base) {
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&fep->hw_lock);
+
+ writel(FSL_ESW_MODE_SW_RST, fep->membase + FEC_ESW_MODE);
+ udelay(10);
+ writel(FSL_ESW_MODE_STATRST, fep->membase + FEC_ESW_MODE);
+ writel(FSL_ESW_MODE_SW_EN, fep->membase + FEC_ESW_MODE);
+
+ /* Enable transmit/receive on all ports */
+ writel(0xffffffff, fep->membase + FEC_ESW_PER);
+
+ /* Management port configuration,
+ * make port 0 as management port
+ */
+ writel(0, fep->membase + FEC_ESW_BMPC);
+
+ /* Clear any outstanding interrupt.*/
+ writel(0xffffffff, fep->membase + FEC_ESW_ISR);
+ writel(0, fep->membase + FEC_ESW_IMR);
+ udelay(100);
+
+ /* Get the Ethernet address */
+ switch_get_mac_address(dev);
+
+ /* Set receive and transmit descriptor base. */
+ fep->rx_bd_base = cbd_base;
+ fep->tx_bd_base = cbd_base + RX_RING_SIZE;
+
+ dev->base_addr = (unsigned long)fep->membase;
+
+ /* The FEC Ethernet specific entries in the device structure. */
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->netdev_ops = &switch_netdev_ops;
+
+ fep->skb_cur = fep->skb_dirty = 0;
+
+ ret = switch_alloc_buffers(dev);
+ if (ret)
+ goto err_enet_alloc;
+
+ /* Set receive and transmit descriptor base */
+ writel(fep->bd_dma, fep->membase + FEC_ESW_RDSR);
+ writel((unsigned long)fep->bd_dma +
+ sizeof(struct bufdesc) * RX_RING_SIZE,
+ fep->membase + FEC_ESW_TDSR);
+
+ /* set mii */
+ switch_hw_init(dev);
+
+ /* Clear any outstanding interrupt. */
+ writel(0xffffffff, fep->membase + FEC_ESW_ISR);
+ writel(FSL_ESW_IMR_RXF | FSL_ESW_IMR_TXF, fep->membase + FEC_ESW_IMR);
+
+ fep->sequence_done = 1;
+
+ return ret;
+
+err_enet_alloc:
+ switch_enet_clk_enable(dev, false);
+
+ return ret;
+}
+
+static void switch_enet_tx(struct net_device *dev)
+{
+ struct switch_enet_private *fep;
+ struct bufdesc *bdp;
+ unsigned short status;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ fep = netdev_priv(dev);
+ spin_lock_irqsave(&fep->hw_lock, flags);
+ bdp = fep->dirty_tx;
+
+ while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
+ if (bdp == fep->cur_tx && fep->tx_full == 0)
+ break;
+
+ if (bdp->cbd_bufaddr)
+ dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
+ SWITCH_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+ bdp->cbd_bufaddr = 0;
+
+ skb = fep->tx_skbuff[fep->skb_dirty];
+ /* Check for errors. */
+ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ BD_ENET_TX_RL | BD_ENET_TX_UN |
+ BD_ENET_TX_CSL)) {
+ dev->stats.tx_errors++;
+ if (status & BD_ENET_TX_HB) /* No heartbeat */
+ dev->stats.tx_heartbeat_errors++;
+ if (status & BD_ENET_TX_LC) /* Late collision */
+ dev->stats.tx_window_errors++;
+ if (status & BD_ENET_TX_RL) /* Retrans limit */
+ dev->stats.tx_aborted_errors++;
+ if (status & BD_ENET_TX_UN) /* Underrun */
+ dev->stats.tx_fifo_errors++;
+ if (status & BD_ENET_TX_CSL) /* Carrier lost */
+ dev->stats.tx_carrier_errors++;
+ } else {
+ dev->stats.tx_packets++;
+ }
+
+ /* Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (status & BD_ENET_TX_DEF)
+ dev->stats.collisions++;
+
+ /* Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_any(skb);
+ fep->tx_skbuff[fep->skb_dirty] = NULL;
+ fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
+
+ /* Update pointer to next buffer descriptor to be transmitted.
+ */
+ if (status & BD_ENET_TX_WRAP)
+ bdp = fep->tx_bd_base;
+ else
+ bdp++;
+
+ /* Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (fep->tx_full) {
+ fep->tx_full = 0;
+ netdev_err(dev, "%s: tx full is zero\n", __func__);
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+ }
+ fep->dirty_tx = (cbd_t *)bdp;
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
+}
+
+/* During a receive, the cur_rx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static void switch_enet_rx(struct net_device *dev)
+{
+ struct switch_enet_private *fep;
+ cbd_t *bdp;
+ unsigned short status;
+ struct sk_buff *skb;
+ ushort pkt_len;
+ __u8 *data;
+ unsigned long flags;
+
+ fep = netdev_priv(dev);
+
+ spin_lock_irqsave(&fep->hw_lock, flags);
+ /* First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
+ /* Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((status & BD_ENET_RX_LAST) == 0)
+ netdev_err(dev, "SWITCH ENET: rcv is not +last\n");
+
+ if (!fep->opened)
+ goto rx_processing_done;
+
+ /* Check for errors. */
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ dev->stats.rx_errors++;
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ /* Frame too long or too short. */
+ dev->stats.rx_length_errors++;
+ }
+ if (status & BD_ENET_RX_NO) /* Frame alignment */
+ dev->stats.rx_frame_errors++;
+ if (status & BD_ENET_RX_CR) /* CRC Error */
+ dev->stats.rx_crc_errors++;
+ if (status & BD_ENET_RX_OV) /* FIFO overrun */
+ dev->stats.rx_fifo_errors++;
+ }
+ /* Report late collisions as a frame error.
+ * On this error, the BD is closed, but we don't know what we
+ * have in the buffer. So, just drop this frame on the floor.
+ */
+ if (status & BD_ENET_RX_CL) {
+ dev->stats.rx_errors++;
+ dev->stats.rx_frame_errors++;
+ goto rx_processing_done;
+ }
+ /* Process the incoming frame */
+ dev->stats.rx_packets++;
+ pkt_len = bdp->cbd_datlen;
+ dev->stats.rx_bytes += pkt_len;
+ data = (__u8 *)__va(bdp->cbd_bufaddr);
+
+ if (bdp->cbd_bufaddr)
+ dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
+ SWITCH_ENET_TX_FRSIZE, DMA_FROM_DEVICE);
+
+ /* This does 16 byte alignment, exactly what we need.
+ * The packet length includes FCS, but we don't want to
+ * include that when passing upstream as it messes up
+ * bridging applications.
+ */
+ skb = dev_alloc_skb(pkt_len - 4 + NET_IP_ALIGN);
+
+ if (!skb)
+ dev->stats.rx_dropped++;
+
+ if (unlikely(!skb)) {
+ netdev_err(dev,
+ "%s:Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ } else {
+ skb_reserve(skb, NET_IP_ALIGN);
+ skb_put(skb, pkt_len - 4); /* Make room */
+ skb_copy_to_linear_data(skb, data, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ }
+
+ bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, data,
+ SWITCH_ENET_TX_FRSIZE, DMA_FROM_DEVICE);
+rx_processing_done:
+
+ /* Clear the status flags for this buffer */
+ status &= ~BD_ENET_RX_STATS;
+
+ /* Mark the buffer empty */
+ status |= BD_ENET_RX_EMPTY;
+ bdp->cbd_sc = status;
+
+ /* Update BD pointer to next entry */
+ if (status & BD_ENET_RX_WRAP)
+ bdp = fep->rx_bd_base;
+ else
+ bdp++;
+
+ /* Doing this here will keep the FEC running while we process
+ * incoming frames. On a heavily loaded network, we should be
+ * able to keep up at the expense of system resources.
+ */
+ writel(FSL_ESW_RDAR_R_DES_ACTIVE, fep->membase + FEC_ESW_RDAR);
+ }
+ fep->cur_rx = (cbd_t *)bdp;
+
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
+}
+
+/* The interrupt handler */
+static irqreturn_t switch_enet_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct switch_enet_private *fep = netdev_priv(dev);
+ uint int_events;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* Get the interrupt events that caused us to be here. */
+ do {
+ int_events = readl(fep->membase + FEC_ESW_ISR);
+ writel(int_events, fep->membase + FEC_ESW_ISR);
+
+ /* Handle receive event in its own function. */
+
+ if (int_events & FSL_ESW_ISR_RXF) {
+ ret = IRQ_HANDLED;
+ switch_enet_rx(dev);
+ }
+
+ if (int_events & FSL_ESW_ISR_TXF) {
+ ret = IRQ_HANDLED;
+ switch_enet_tx(dev);
+ }
+
+ } while (int_events);
+
+ return ret;
+}
+
+static int eth_switch_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct switch_enet_private *fep;
+
+ fep = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ writel(0, fep->enetbase + FSL_FEC_ECR0);
+ writel(0, fep->enetbase + FSL_FEC_ECR1);
+ udelay(10);
+
+ writel(FSL_ESW_MODE_SW_RST, fep->membase + FEC_ESW_MODE);
+ udelay(10);
+ writel(FSL_ESW_MODE_STATRST, fep->membase + FEC_ESW_MODE);
+ writel(0, fep->membase + FEC_ESW_MODE);
+
+ /* Disable transmit/receive on all ports */
+ writel(0, fep->membase + FEC_ESW_PER);
+
+ clk_disable_unprepare(fep->clk_enet1);
+ clk_disable_unprepare(fep->clk_enet0);
+ clk_disable_unprepare(fep->clk_enet);
+ clk_disable_unprepare(fep->clk_esw);
+
+ free_netdev(dev);
+
+ return 0;
+}
+
+static const struct of_device_id of_eth_switch_match[] = {
+ { .compatible = "fsl,eth-switch", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_eth_switch_match);
+
+/* TODO: suspend/resume related code */
+
+static int eth_switch_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev = NULL;
+ struct switch_enet_private *fep = NULL;
+ int irq = 0, ret = 0, err = 0;
+ struct resource *res = NULL;
+ const struct of_device_id *match;
+ static int dev_id;
+
+ match = of_match_device(of_eth_switch_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ pdev->id_entry = match->data;
+
+ /* Initialize network device */
+ ndev = alloc_etherdev(sizeof(struct switch_enet_private));
+ if (!ndev)
+ return -ENOMEM;
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ fep = netdev_priv(ndev);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fep->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fep->membase)) {
+ ret = PTR_ERR(fep->membase);
+ goto failed_ioremap;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ fep->enetbase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fep->enetbase)) {
+ ret = PTR_ERR(fep->enetbase);
+ goto failed_ioremap;
+ }
+
+ fep->pdev = pdev;
+ fep->dev_id = dev_id++;
+
+ platform_set_drvdata(pdev, ndev);
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(&pdev->dev, irq, switch_enet_interrupt,
+ 0, pdev->name, ndev);
+ if (ret)
+ return ret;
+
+ fep->clk_esw = devm_clk_get(&pdev->dev, "esw");
+ if (IS_ERR(fep->clk_esw)) {
+ ret = PTR_ERR(fep->clk_esw);
+ goto failed_clk;
+ }
+
+ fep->clk_enet = devm_clk_get(&pdev->dev, "enet");
+ if (IS_ERR(fep->clk_enet)) {
+ ret = PTR_ERR(fep->clk_enet);
+ goto failed_clk;
+ }
+
+ fep->clk_enet0 = devm_clk_get(&pdev->dev, "enet0");
+ if (IS_ERR(fep->clk_enet0)) {
+ ret = PTR_ERR(fep->clk_enet0);
+ goto failed_clk;
+ }
+
+ fep->clk_enet1 = devm_clk_get(&pdev->dev, "enet1");
+ if (IS_ERR(fep->clk_enet1)) {
+ ret = PTR_ERR(fep->clk_enet1);
+ goto failed_clk;
+ }
+
+ switch_enet_clk_enable(ndev, true);
+
+ err = switch_enet_init(ndev);
+ if (err) {
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+ return -EIO;
+ }
+
+ /* register network device */
+ ret = register_netdev(ndev);
+ if (ret)
+ goto failed_register;
+
+ netdev_info(ndev, "%s: Ethernet switch %pM\n",
+ ndev->name, ndev->dev_addr);
+
+ return 0;
+
+failed_register:
+failed_clk:
+failed_ioremap:
+ free_netdev(ndev);
+
+ return ret;
+}
+
+static struct platform_driver eth_switch_driver = {
+ .probe = eth_switch_probe,
+ .remove = (eth_switch_remove),
+ .driver = {
+ .name = "eth-switch",
+ .owner = THIS_MODULE,
+ .of_match_table = of_eth_switch_match,
+ },
+};
+
+static int __init fsl_l2_switch_init(void)
+{
+ return platform_driver_register(&eth_switch_driver);
+}
+
+static void __exit fsl_l2_switch_exit(void)
+{
+ platform_driver_unregister(&eth_switch_driver);
+}
+
+module_init(fsl_l2_switch_init);
+module_exit(fsl_l2_switch_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/freescale/fsl_l2_switch.h b/drivers/net/ethernet/freescale/fsl_l2_switch.h
new file mode 100644
index 000000000000..62b5f1207752
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fsl_l2_switch.h
@@ -0,0 +1,776 @@
+/*
+ * Copyright 2010-2012 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef FSL_L2_SWITCH_H
+#define FSL_L2_SWITCH_H
+
+/* Interrupt events/masks */
+#define FEC_ENET_HBERR BIT(31) /* Heartbeat error */
+#define FEC_ENET_BABR BIT(30) /* Babbling receiver */
+#define FEC_ENET_BABT BIT(29) /* Babbling transmitter */
+#define FEC_ENET_GRA BIT(28) /* Graceful stop complete */
+#define FEC_ENET_TXF BIT(27) /* Full frame transmitted */
+#define FEC_ENET_TXB BIT(26) /* A buffer was transmitted */
+#define FEC_ENET_RXF BIT(25) /* Full frame received */
+#define FEC_ENET_RXB BIT(24) /* A buffer was received */
+#define FEC_ENET_MII BIT(23) /* MII interrupt */
+#define FEC_ENET_EBERR BIT(22) /* SDMA bus error */
+
+#define NMII 20
+
+/* Make MII read/write commands for the FEC */
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+/* MII MMFR bits definition */
+#define ESW_MMFR_ST BIT(30)
+#define ESW_MMFR_OP_READ (2 << 28)
+#define ESW_MMFR_OP_WRITE BIT(28)
+#define ESW_MMFR_PA(v) ((v & 0x1f) << 23)
+#define ESW_MMFR_RA(v) ((v & 0x1f) << 18)
+#define ESW_MMFR_TA (2 << 16)
+#define ESW_MMFR_DATA(v) (v & 0xffff)
+
+#define ESW_MII_TIMEOUT 30 /* ms */
+
+/* Transmitter timeout.*/
+#define TX_TIMEOUT (2 * HZ)
+
+/* The Switch stores dest/src/type, data,
+ * and checksum for receive packets.
+ */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+/* The 5441x RX control register also contains maximum frame
+ * size bits.
+ */
+#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
+
+/* The number of Tx and Rx buffers. These are allocated from the page
+ * pool. The code may assume these are power of two, so it it best
+ * to keep them that size.
+ * We don't need to allocate pages for the transmitter. We just use
+ * the skbuffer directly.
+ */
+#ifdef CONFIG_SWITCH_DMA_USE_SRAM
+#define SWITCH_ENET_RX_PAGES 6
+#else
+#define SWITCH_ENET_RX_PAGES 8
+#endif
+
+#define SWITCH_ENET_RX_FRSIZE 2048
+#define SWITCH_ENET_RX_FRPPG (PAGE_SIZE / SWITCH_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (SWITCH_ENET_RX_FRPPG * SWITCH_ENET_RX_PAGES)
+#define SWITCH_ENET_TX_FRSIZE 2048
+#define SWITCH_ENET_TX_FRPPG (PAGE_SIZE / SWITCH_ENET_TX_FRSIZE)
+
+#ifdef CONFIG_SWITCH_DMA_USE_SRAM
+#define TX_RING_SIZE 8 /* Must be power of two */
+#define TX_RING_MOD_MASK 7 /* for this to work */
+#else
+#define TX_RING_SIZE 16 /* Must be power of two */
+#define TX_RING_MOD_MASK 15 /* for this to work */
+#endif
+
+#define SWITCH_EPORT_NUMBER 2
+
+#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
+#error "L2SWITCH: descriptor ring size constants too large"
+#endif
+
+/* memory-mapped register offset */
+#define FEC_ESW_REVISION 0x00
+#define FEC_ESW_SCRATCH 0x04
+#define FEC_ESW_PER 0x08
+
+#define FEC_ESW_VLANV 0x10
+#define FEC_ESW_DBCR 0x14
+#define FEC_ESW_DMCR 0x18
+#define FEC_ESW_BKLR 0x1C
+#define FEC_ESW_BMPC 0x20
+#define FEC_ESW_MODE 0x24
+#define FEC_ESW_VIMSEL 0x28
+#define FEC_ESW_VOMSEL 0x2C
+#define FEC_ESW_VIMEN 0x30
+#define FEC_ESW_VID 0x34
+
+#define FEC_ESW_MCR 0x40
+#define FEC_ESW_EGMAP 0x44
+#define FEC_ESW_INGMAP 0x48
+#define FEC_ESW_INGSAL 0x4C
+#define FEC_ESW_INGSAH 0x50
+#define FEC_ESW_INGDAL 0x54
+#define FEC_ESW_INGDAH 0x58
+#define FEC_ESW_ENGSAL 0x5C
+#define FEC_ESW_ENGSAH 0x60
+#define FEC_ESW_ENGDAL 0x64
+#define FEC_ESW_ENGDAH 0x68
+#define FEC_ESW_MCVAL 0x6C
+
+#define FEC_ESW_MMSR 0x80
+#define FEC_ESW_LMT 0x84
+#define FEC_ESW_LFC 0x88
+#define FEC_ESW_PCSR 0x8C
+#define FEC_ESW_IOSR 0x90
+#define FEC_ESW_QWT 0x94
+
+#define FEC_ESW_P0BCT 0x9C
+
+#define FEC_ESW_P0FFEN 0xBC
+#define FEC_ESW_PSNP(n) (0xC0 + 4 * n)
+#define FEC_ESW_IPSNP(n) (0xE0 + 4 * n)
+#define FEC_ESW_PVRES(n) (0x100 + 4 * n)
+
+#define FEC_ESW_IPRES 0x140
+
+/* port0-port2 Priority Configuration 0xFC0D_C180-C188 */
+#define FEC_ESW_PRES(n) (0x180 + n * 4)
+
+/* port0-port2 VLAN ID 0xFC0D_C200-C208 */
+#define FEC_ESW_PID(n) (0x200 + 4 * n)
+
+/* port0-port2 VLAN domain resolution entry 0xFC0D_C280-C2FC */
+#define FEC_ESW_VRES(n) (0x280 + n * 4)
+
+#define FEC_ESW_DISCN 0x300
+#define FEC_ESW_DISCB 0x304
+#define FEC_ESW_NDISCN 0x308
+#define FEC_ESW_NDISCB 0x30C
+/* per port statistics 0xFC0DC310_C33C */
+
+#define FEC_ESW_POQC(n) (0x310 + n * 16)
+#define FEC_ESW_PMVID(n) (0x310 + n * 16 + 0x04)
+#define FEC_ESW_PMVTAG(n) (0x310 + n * 16 + 0x08)
+#define FEC_ESW_PBL(n) (0x310 + n * 16 + 0x0C)
+
+#define FEC_ESW_ISR 0x400 /* Interrupt event reg */
+#define FEC_ESW_IMR 0x404 /* Interrupt mask reg */
+#define FEC_ESW_RDSR 0x408 /* Receive descriptor ring */
+#define FEC_ESW_TDSR 0x40C /* Transmit descriptor ring */
+#define FEC_ESW_MRBR 0x410 /* Maximum receive buff size */
+#define FEC_ESW_RDAR 0x414 /* Receive descriptor active */
+#define FEC_ESW_TDAR 0x418 /* Transmit descriptor active */
+
+#define FEC_ESW_LREC0 0x500
+#define FEC_ESW_LREC1 0x504
+#define FEC_ESW_LSR 0x508
+
+#include <linux/phy.h>
+struct switch_platform_data {
+ phy_interface_t phy;
+ unsigned char mac[ETH_ALEN];
+};
+
+#define FSL_FEC_MMFR0 (0x40)
+#define FSL_FEC_MSCR0 (0x44)
+#define FSL_FEC_MSCR1 (0x1044)
+#define FSL_FEC_RCR0 (0x84)
+#define FSL_FEC_RCR1 (0x1084)
+#define FSL_FEC_TCR0 (0xc4)
+#define FSL_FEC_TCR1 (0x10c4)
+#define FSL_FEC_ECR0 (0x24)
+#define FSL_FEC_ECR1 (0x1024)
+#define FSL_FEC_EIR0 (0x04)
+#define FSL_FEC_EIR1 (0x1004)
+#define FSL_FEC_EIMR0 (0x08)
+#define FSL_FEC_EIMR1 (0x1008)
+#define FSL_FEC_PALR0 (0x0e4)
+#define FSL_FEC_PAUR0 (0x0e8)
+#define FSL_FEC_PALR1 (0x10e4)
+#define FSL_FEC_PAUR1 (0x10e8)
+#define FSL_FEC_X_WMRK0 (0x0144)
+#define FSL_FEC_X_WMRK1 (0x1144)
+
+#define FSL_FEC_RCR_MII_MODE (0x00000004)
+#define FSL_FEC_RCR_PROM (0x00000008)
+#define FSL_FEC_RCR_RMII_MODE (0x00000100)
+#define FSL_FEC_RCR_MAX_FL(x) (((x) & 0x00003FFF) << 16)
+#define FSL_FEC_RCR_CRC_FWD (0x00004000)
+
+#define FSL_FEC_TCR_FDEN (0x00000004)
+
+#define FSL_FEC_ECR_ETHER_EN (0x00000002)
+#define FSL_FEC_ECR_ENA_1588 (0x00000010)
+
+#define LEARNING_AGING_TIMER (10 * HZ)
+
+/* Define the buffer descriptor structure. */
+typedef struct bufdesc {
+ unsigned short cbd_datlen; /* Data length */
+ unsigned short cbd_sc; /* Control and status info */
+ unsigned long cbd_bufaddr; /* Buffer address */
+} cbd_t;
+
+typedef struct bufdesc_rx {
+ unsigned short cbd_datlen; /* Data length */
+ unsigned short cbd_sc; /* Control and status info */
+ unsigned long cbd_bufaddr; /* Buffer address */
+} cbd_t_r;
+
+/* Forward declarations of some structures to support different PHYs */
+typedef struct _phy_cmd_t {
+ uint mii_data;
+ void (*funct)(uint mii_reg, struct net_device *dev);
+} phy_cmd_t;
+
+typedef struct _phy_info_t {
+ uint id;
+ char *name;
+
+ const phy_cmd_t *config;
+ const phy_cmd_t *startup;
+ const phy_cmd_t *ack_int;
+ const phy_cmd_t *shutdown;
+} phy_info_t;
+
+struct port_status {
+ /* 1: link is up, 0: link is down */
+ int port1_link_status;
+ int port2_link_status;
+ /* 1: blocking, 0: unblocking */
+ int port0_block_status;
+ int port1_block_status;
+ int port2_block_status;
+};
+
+/* The switch buffer descriptors track the ring buffers. The rx_bd_base and
+ * tx_bd_base always point to the base of the buffer descriptors. The
+ * cur_rx and cur_tx point to the currently available buffer.
+ * The dirty_tx tracks the current buffer that is being sent by the
+ * controller. The cur_tx and dirty_tx are equal under both completely
+ * empty and completely full conditions. The empty/ready indicator in
+ * the buffer descriptor determines the actual condition.
+ */
+struct switch_enet_private {
+ /* Hardware registers of the switch device */
+ void __iomem *membase;
+ void __iomem *macbase; /* MAC address lookup table */
+ void __iomem *enetbase;
+
+ struct clk *clk_esw;
+ struct clk *clk_enet;
+ struct clk *clk_enet0;
+ struct clk *clk_enet1;
+
+ struct net_device *netdev;
+ struct platform_device *pdev;
+
+ int dev_id;
+
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ unsigned char *tx_bounce[TX_RING_SIZE];
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ ushort skb_cur;
+ ushort skb_dirty;
+
+ /* CPM dual port RAM relative addresses */
+ dma_addr_t bd_dma;
+
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
+ uint tx_full;
+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+ spinlock_t hw_lock;
+
+ uint sequence_done;
+
+ int index;
+ int opened;
+ int full_duplex;
+ int msg_enable;
+
+ /* timer related */
+ /* current time (for timestamping) */
+ int curr_time;
+ /* flag set by timer when curr_time changed
+ * and cleared by serving function
+ */
+ int time_changed;
+
+ /* Timer for Aging */
+ struct timer_list timer_aging;
+ int learning_irqhandle_enable;
+};
+
+struct switch_platform_private {
+ unsigned long quirks;
+ int num_slots; /* Slots on controller */
+ struct switch_enet_private *fep_host[0]; /* Pointers to hosts */
+};
+
+/* Receive is empty */
+#define BD_SC_EMPTY ((unsigned short)0x8000)
+/* Transmit is ready */
+#define BD_SC_READY ((unsigned short)0x8000)
+/* Last buffer descriptor */
+#define BD_SC_WRAP ((unsigned short)0x2000)
+/* Interrupt on change */
+#define BD_SC_INTRPT ((unsigned short)0x1000)
+/* Continuous mode */
+#define BD_SC_CM ((unsigned short)0x0200)
+/* Rec'd too many idles */
+#define BD_SC_ID ((unsigned short)0x0100)
+/* xmt preamble */
+#define BD_SC_P ((unsigned short)0x0100)
+/* Break received */
+#define BD_SC_BR ((unsigned short)0x0020)
+/* Framing error */
+#define BD_SC_FR ((unsigned short)0x0010)
+/* Parity error */
+#define BD_SC_PR ((unsigned short)0x0008)
+/* Overrun */
+#define BD_SC_OV ((unsigned short)0x0002)
+#define BD_SC_CD ((unsigned short)0x0001)
+
+/* Buffer descriptor control/status used by Ethernet receive.*/
+#define BD_ENET_RX_EMPTY ((unsigned short)0x8000)
+#define BD_ENET_RX_WRAP ((unsigned short)0x2000)
+#define BD_ENET_RX_INTR ((unsigned short)0x1000)
+#define BD_ENET_RX_LAST ((unsigned short)0x0800)
+#define BD_ENET_RX_FIRST ((unsigned short)0x0400)
+#define BD_ENET_RX_MISS ((unsigned short)0x0100)
+#define BD_ENET_RX_LG ((unsigned short)0x0020)
+#define BD_ENET_RX_NO ((unsigned short)0x0010)
+#define BD_ENET_RX_SH ((unsigned short)0x0008)
+#define BD_ENET_RX_CR ((unsigned short)0x0004)
+#define BD_ENET_RX_OV ((unsigned short)0x0002)
+#define BD_ENET_RX_CL ((unsigned short)0x0001)
+
+/* All status bits */
+#define BD_ENET_RX_STATS ((unsigned short)0x013f)
+
+/* Buffer descriptor control/status used by Ethernet transmit. */
+#define BD_ENET_TX_READY ((unsigned short)0x8000)
+#define BD_ENET_TX_PAD ((unsigned short)0x4000)
+#define BD_ENET_TX_WRAP ((unsigned short)0x2000)
+#define BD_ENET_TX_INTR ((unsigned short)0x1000)
+#define BD_ENET_TX_LAST ((unsigned short)0x0800)
+#define BD_ENET_TX_TC ((unsigned short)0x0400)
+#define BD_ENET_TX_DEF ((unsigned short)0x0200)
+#define BD_ENET_TX_HB ((unsigned short)0x0100)
+#define BD_ENET_TX_LC ((unsigned short)0x0080)
+#define BD_ENET_TX_RL ((unsigned short)0x0040)
+#define BD_ENET_TX_RCMASK ((unsigned short)0x003c)
+#define BD_ENET_TX_UN ((unsigned short)0x0002)
+#define BD_ENET_TX_CSL ((unsigned short)0x0001)
+
+/* All status bits */
+#define BD_ENET_TX_STATS ((unsigned short)0x03ff)
+
+/* Copy from validation code */
+#define RX_BUFFER_SIZE 1520
+#define TX_BUFFER_SIZE 1520
+#define NUM_RXBDS 20
+#define NUM_TXBDS 20
+
+#define TX_BD_R 0x8000
+#define TX_BD_TO1 0x4000
+#define TX_BD_W 0x2000
+#define TX_BD_TO2 0x1000
+#define TX_BD_L 0x0800
+#define TX_BD_TC 0x0400
+
+#define TX_BD_INT 0x40000000
+#define TX_BD_TS 0x20000000
+#define TX_BD_PINS 0x10000000
+#define TX_BD_IINS 0x08000000
+#define TX_BD_TXE 0x00008000
+#define TX_BD_UE 0x00002000
+#define TX_BD_EE 0x00001000
+#define TX_BD_FE 0x00000800
+#define TX_BD_LCE 0x00000400
+#define TX_BD_OE 0x00000200
+#define TX_BD_TSE 0x00000100
+#define TX_BD_BDU 0x80000000
+
+#define RX_BD_E 0x8000
+#define RX_BD_R01 0x4000
+#define RX_BD_W 0x2000
+#define RX_BD_R02 0x1000
+#define RX_BD_L 0x0800
+#define RX_BD_M 0x0100
+#define RX_BD_BC 0x0080
+#define RX_BD_MC 0x0040
+#define RX_BD_LG 0x0020
+#define RX_BD_NO 0x0010
+#define RX_BD_CR 0x0004
+#define RX_BD_OV 0x0002
+#define RX_BD_TR 0x0001
+
+#define RX_BD_ME 0x80000000
+#define RX_BD_PE 0x04000000
+#define RX_BD_CE 0x02000000
+#define RX_BD_UC 0x01000000
+#define RX_BD_INT 0x00800000
+#define RX_BD_ICE 0x00000020
+#define RX_BD_PCR 0x00000010
+#define RX_BD_VLAN 0x00000004
+#define RX_BD_IPV6 0x00000002
+#define RX_BD_FRAG 0x00000001
+#define RX_BD_BDU 0x80000000
+
+/* Address Table size in bytes(2048 64bit entry ) */
+#define ESW_ATABLE_MEM_SIZE (2048 * 8)
+/* How many 64-bit elements fit in the address table */
+#define ESW_ATABLE_MEM_NUM_ENTRIES (2048)
+/* Address Table Maximum number of entries in each Slot */
+#define ATABLE_ENTRY_PER_SLOT 8
+/* log2(ATABLE_ENTRY_PER_SLOT) */
+#define ATABLE_ENTRY_PER_SLOT_bits 3
+/* entry size in byte */
+#define ATABLE_ENTRY_SIZE 8
+/* slot size in byte */
+#define ATABLE_SLOT_SIZE (ATABLE_ENTRY_PER_SLOT * ATABLE_ENTRY_SIZE)
+/* width of timestamp variable (bits) within address table entry */
+#define AT_DENTRY_TIMESTAMP_WIDTH 10
+/* number of bits for port number storage */
+#define AT_DENTRY_PORT_WIDTH 4
+/* number of bits for port bitmask number storage */
+#define AT_SENTRY_PORT_WIDTH 7
+/* address table static entry port bitmask start address bit */
+#define AT_SENTRY_PORTMASK_shift 21
+/* number of bits for port priority storage */
+#define AT_SENTRY_PRIO_WIDTH 7
+/* address table static entry priority start address bit */
+#define AT_SENTRY_PRIO_shift 18
+/* address table dynamic entry port start address bit */
+#define AT_DENTRY_PORT_shift 28
+/* address table dynamic entry timestamp start address bit */
+#define AT_DENTRY_TIME_shift 18
+/* address table entry record type start address bit */
+#define AT_ENTRY_TYPE_shift 17
+/* address table entry record type bit: 1 static, 0 dynamic */
+#define AT_ENTRY_TYPE_STATIC 1
+#define AT_ENTRY_TYPE_DYNAMIC 0
+/* address table entry record valid start address bit */
+#define AT_ENTRY_VALID_shift 16
+#define AT_ENTRY_RECORD_VALID 1
+
+#define AT_EXTRACT_VALID(x) \
+ ((x >> AT_ENTRY_VALID_shift) & AT_ENTRY_RECORD_VALID)
+
+#define AT_EXTRACT_PORTMASK(x) \
+ ((x >> AT_SENTRY_PORTMASK_shift) & AT_SENTRY_PORT_WIDTH)
+
+#define AT_EXTRACT_PRIO(x) \
+ ((x >> AT_SENTRY_PRIO_shift) & AT_SENTRY_PRIO_WIDTH)
+
+/* return block corresponding to the 8 bit hash value calculated */
+#define GET_BLOCK_PTR(hash) (hash << 3)
+#define AT_EXTRACT_TIMESTAMP(x) \
+ ((x >> AT_DENTRY_TIME_shift) & ((1 << AT_DENTRY_TIMESTAMP_WIDTH) - 1))
+#define AT_EXTRACT_PORT(x) \
+ ((x >> AT_DENTRY_PORT_shift) & ((1 << AT_DENTRY_PORT_WIDTH) - 1))
+#define AT_SEXTRACT_PORT(x) \
+ ((~((x >> AT_SENTRY_PORTMASK_shift) & \
+ ((1 << AT_DENTRY_PORT_WIDTH) - 1))) >> 1)
+#define TIMEDELTA(newtime, oldtime) \
+ ((newtime - oldtime) & \
+ ((1 << AT_DENTRY_TIMESTAMP_WIDTH) - 1))
+
+#define AT_EXTRACT_IP_PROTOCOL(x) ((x >> 8) & 0xff)
+#define AT_EXTRACT_TCP_UDP_PORT(x) ((x >> 16) & 0xffff)
+
+/* increment time value respecting modulo. */
+#define TIMEINCREMENT(time) \
+ ((time) = ((time)+1) & ((1 << AT_DENTRY_TIMESTAMP_WIDTH)-1))
+
+/* Bit definitions and macros for FSL_ESW_REVISION */
+#define FSL_ESW_REVISION_CORE_REVISION(x) (((x)&0x0000FFFF) << 0)
+#define FSL_ESW_REVISION_CUSTOMER_REVISION(x) (((x)&0x0000FFFF) << 16)
+
+/* Bit definitions and macros for FSL_ESW_PER */
+#define FSL_ESW_PER_TE0 (0x00000001)
+#define FSL_ESW_PER_TE1 (0x00000002)
+#define FSL_ESW_PER_TE2 (0x00000004)
+#define FSL_ESW_PER_RE0 (0x00010000)
+#define FSL_ESW_PER_RE1 (0x00020000)
+#define FSL_ESW_PER_RE2 (0x00040000)
+
+/* Bit definitions and macros for FSL_ESW_VLANV */
+#define FSL_ESW_VLANV_VV0 (0x00000001)
+#define FSL_ESW_VLANV_VV1 (0x00000002)
+#define FSL_ESW_VLANV_VV2 (0x00000004)
+#define FSL_ESW_VLANV_DU0 (0x00010000)
+#define FSL_ESW_VLANV_DU1 (0x00020000)
+#define FSL_ESW_VLANV_DU2 (0x00040000)
+
+/* Bit definitions and macros for FSL_ESW_DBCR */
+#define FSL_ESW_DBCR_P0 (0x00000001)
+#define FSL_ESW_DBCR_P1 (0x00000002)
+#define FSL_ESW_DBCR_P2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_DMCR */
+#define FSL_ESW_DMCR_P0 (0x00000001)
+#define FSL_ESW_DMCR_P1 (0x00000002)
+#define FSL_ESW_DMCR_P2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_BKLR */
+#define FSL_ESW_BKLR_BE0 (0x00000001)
+#define FSL_ESW_BKLR_BE1 (0x00000002)
+#define FSL_ESW_BKLR_BE2 (0x00000004)
+#define FSL_ESW_BKLR_LD0 (0x00010000)
+#define FSL_ESW_BKLR_LD1 (0x00020000)
+#define FSL_ESW_BKLR_LD2 (0x00040000)
+#define FSL_ESW_BKLR_LDX (0x00070007)
+
+/* Bit definitions and macros for FSL_ESW_BMPC */
+#define FSL_ESW_BMPC_PORT(x) (((x) & 0x0000000F) << 0)
+#define FSL_ESW_BMPC_MSG_TX (0x00000020)
+#define FSL_ESW_BMPC_EN (0x00000040)
+#define FSL_ESW_BMPC_DIS (0x00000080)
+#define FSL_ESW_BMPC_PRIORITY(x) (((x) & 0x00000007) << 13)
+#define FSL_ESW_BMPC_PORTMASK(x) (((x) & 0x00000007) << 16)
+
+/* Bit definitions and macros for FSL_ESW_MODE */
+#define FSL_ESW_MODE_SW_RST (0x00000001)
+#define FSL_ESW_MODE_SW_EN (0x00000002)
+#define FSL_ESW_MODE_STOP (0x00000080)
+#define FSL_ESW_MODE_CRC_TRAN (0x00000100)
+#define FSL_ESW_MODE_P0CT (0x00000200)
+#define FSL_ESW_MODE_STATRST (0x80000000)
+
+/* Bit definitions and macros for FSL_ESW_VIMSEL */
+#define FSL_ESW_VIMSEL_IM0(x) (((x) & 0x00000003) << 0)
+#define FSL_ESW_VIMSEL_IM1(x) (((x) & 0x00000003) << 2)
+#define FSL_ESW_VIMSEL_IM2(x) (((x) & 0x00000003) << 4)
+
+/* Bit definitions and macros for FSL_ESW_VOMSEL */
+#define FSL_ESW_VOMSEL_OM0(x) (((x) & 0x00000003) << 0)
+#define FSL_ESW_VOMSEL_OM1(x) (((x) & 0x00000003) << 2)
+#define FSL_ESW_VOMSEL_OM2(x) (((x) & 0x00000003) << 4)
+
+/* Bit definitions and macros for FSL_ESW_VIMEN */
+#define FSL_ESW_VIMEN_EN0 (0x00000001)
+#define FSL_ESW_VIMEN_EN1 (0x00000002)
+#define FSL_ESW_VIMEN_EN2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_VID */
+#define FSL_ESW_VID_TAG(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_MCR */
+#define FSL_ESW_MCR_PORT(x) (((x) & 0x0000000F) << 0)
+#define FSL_ESW_MCR_MEN (0x00000010)
+#define FSL_ESW_MCR_INGMAP (0x00000020)
+#define FSL_ESW_MCR_EGMAP (0x00000040)
+#define FSL_ESW_MCR_INGSA (0x00000080)
+#define FSL_ESW_MCR_INGDA (0x00000100)
+#define FSL_ESW_MCR_EGSA (0x00000200)
+#define FSL_ESW_MCR_EGDA (0x00000400)
+
+/* Bit definitions and macros for FSL_ESW_EGMAP */
+#define FSL_ESW_EGMAP_EG0 (0x00000001)
+#define FSL_ESW_EGMAP_EG1 (0x00000002)
+#define FSL_ESW_EGMAP_EG2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_INGMAP */
+#define FSL_ESW_INGMAP_ING0 (0x00000001)
+#define FSL_ESW_INGMAP_ING1 (0x00000002)
+#define FSL_ESW_INGMAP_ING2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_INGSAL */
+#define FSL_ESW_INGSAL_ADDLOW(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_INGSAH */
+#define FSL_ESW_INGSAH_ADDHIGH(x) (((x) & 0x0000FFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_INGDAL */
+#define FSL_ESW_INGDAL_ADDLOW(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_INGDAH */
+#define FSL_ESW_INGDAH_ADDHIGH(x) (((x) & 0x0000FFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_ENGSAL */
+#define FSL_ESW_ENGSAL_ADDLOW(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_ENGSAH */
+#define FSL_ESW_ENGSAH_ADDHIGH(x) (((x) & 0x0000FFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_ENGDAL */
+#define FSL_ESW_ENGDAL_ADDLOW(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_ENGDAH */
+#define FSL_ESW_ENGDAH_ADDHIGH(x) (((x) & 0x0000FFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_MCVAL */
+#define FSL_ESW_MCVAL_COUNT(x) (((x) & 0x000000FF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_MMSR */
+#define FSL_ESW_MMSR_BUSY (0x00000001)
+#define FSL_ESW_MMSR_NOCELL (0x00000002)
+#define FSL_ESW_MMSR_MEMFULL (0x00000004)
+#define FSL_ESW_MMSR_MFLATCH (0x00000008)
+#define FSL_ESW_MMSR_DQ_GRNT (0x00000040)
+#define FSL_ESW_MMSR_CELLS_AVAIL(x) (((x) & 0x000000FF) << 16)
+
+/* Bit definitions and macros for FSL_ESW_LMT */
+#define FSL_ESW_LMT_THRESH(x) (((x) & 0x000000FF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_LFC */
+#define FSL_ESW_LFC_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_PCSR */
+#define FSL_ESW_PCSR_PC0 (0x00000001)
+#define FSL_ESW_PCSR_PC1 (0x00000002)
+#define FSL_ESW_PCSR_PC2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_IOSR */
+#define FSL_ESW_IOSR_OR0 (0x00000001)
+#define FSL_ESW_IOSR_OR1 (0x00000002)
+#define FSL_ESW_IOSR_OR2 (0x00000004)
+
+/* Bit definitions and macros for FSL_ESW_QWT */
+#define FSL_ESW_QWT_Q0WT(x) (((x) & 0x0000001F) << 0)
+#define FSL_ESW_QWT_Q1WT(x) (((x) & 0x0000001F) << 8)
+#define FSL_ESW_QWT_Q2WT(x) (((x) & 0x0000001F) << 16)
+#define FSL_ESW_QWT_Q3WT(x) (((x) & 0x0000001F) << 24)
+
+/* Bit definitions and macros for FSL_ESW_P0BCT */
+#define FSL_ESW_P0BCT_THRESH(x) (((x) & 0x000000FF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_P0FFEN */
+#define FSL_ESW_P0FFEN_FEN (0x00000001)
+#define FSL_ESW_P0FFEN_FD(x) (((x) & 0x00000003) << 2)
+
+/* Bit definitions and macros for FSL_ESW_PSNP */
+#define FSL_ESW_PSNP_EN (0x00000001)
+#define FSL_ESW_PSNP_MODE(x) (((x) & 0x00000003) << 1)
+#define FSL_ESW_PSNP_CD (0x00000008)
+#define FSL_ESW_PSNP_CS (0x00000010)
+#define FSL_ESW_PSNP_PORT_COMPARE(x) (((x) & 0x0000FFFF) << 16)
+
+/* Bit definitions and macros for FSL_ESW_IPSNP */
+#define FSL_ESW_IPSNP_EN (0x00000001)
+#define FSL_ESW_IPSNP_MODE(x) (((x) & 0x00000003) << 1)
+#define FSL_ESW_IPSNP_PROTOCOL(x) (((x) & 0x000000FF) << 8)
+
+/* Bit definitions and macros for FSL_ESW_PVRES */
+#define FSL_ESW_PVRES_PRI0(x) (((x) & 0x00000007) << 0)
+#define FSL_ESW_PVRES_PRI1(x) (((x) & 0x00000007) << 3)
+#define FSL_ESW_PVRES_PRI2(x) (((x) & 0x00000007) << 6)
+#define FSL_ESW_PVRES_PRI3(x) (((x) & 0x00000007) << 9)
+#define FSL_ESW_PVRES_PRI4(x) (((x) & 0x00000007) << 12)
+#define FSL_ESW_PVRES_PRI5(x) (((x) & 0x00000007) << 15)
+#define FSL_ESW_PVRES_PRI6(x) (((x) & 0x00000007) << 18)
+#define FSL_ESW_PVRES_PRI7(x) (((x) & 0x00000007) << 21)
+
+/* Bit definitions and macros for FSL_ESW_IPRES */
+#define FSL_ESW_IPRES_ADDRESS(x) (((x) & 0x000000FF) << 0)
+#define FSL_ESW_IPRES_IPV4SEL (0x00000100)
+#define FSL_ESW_IPRES_PRI0(x) (((x) & 0x00000003) << 9)
+#define FSL_ESW_IPRES_PRI1(x) (((x) & 0x00000003) << 11)
+#define FSL_ESW_IPRES_PRI2(x) (((x) & 0x00000003) << 13)
+#define FSL_ESW_IPRES_READ (0x80000000)
+
+/* Bit definitions and macros for FSL_ESW_PRES */
+#define FSL_ESW_PRES_VLAN (0x00000001)
+#define FSL_ESW_PRES_IP (0x00000002)
+#define FSL_ESW_PRES_MAC (0x00000004)
+#define FSL_ESW_PRES_DFLT_PRI(x) (((x) & 0x00000007) << 4)
+
+/* Bit definitions and macros for FSL_ESW_PID */
+#define FSL_ESW_PID_VLANID(x) (((x) & 0x0000FFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_VRES */
+#define FSL_ESW_VRES_P0 (0x00000001)
+#define FSL_ESW_VRES_P1 (0x00000002)
+#define FSL_ESW_VRES_P2 (0x00000004)
+#define FSL_ESW_VRES_VLANID(x) (((x) & 0x00000FFF) << 3)
+
+/* Bit definitions and macros for FSL_ESW_DISCN */
+#define FSL_ESW_DISCN_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_DISCB */
+#define FSL_ESW_DISCB_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_NDISCN */
+#define FSL_ESW_NDISCN_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_NDISCB */
+#define FSL_ESW_NDISCB_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_POQC */
+#define FSL_ESW_POQC_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_PMVID */
+#define FSL_ESW_PMVID_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_PMVTAG */
+#define FSL_ESW_PMVTAG_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_PBL */
+#define FSL_ESW_PBL_COUNT(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_ISR */
+#define FSL_ESW_ISR_EBERR (0x00000001)
+#define FSL_ESW_ISR_RXB (0x00000002)
+#define FSL_ESW_ISR_RXF (0x00000004)
+#define FSL_ESW_ISR_TXB (0x00000008)
+#define FSL_ESW_ISR_TXF (0x00000010)
+#define FSL_ESW_ISR_QM (0x00000020)
+#define FSL_ESW_ISR_OD0 (0x00000040)
+#define FSL_ESW_ISR_OD1 (0x00000080)
+#define FSL_ESW_ISR_OD2 (0x00000100)
+#define FSL_ESW_ISR_LRN (0x00000200)
+
+/* Bit definitions and macros for FSL_ESW_IMR */
+#define FSL_ESW_IMR_EBERR (0x00000001)
+#define FSL_ESW_IMR_RXB (0x00000002)
+#define FSL_ESW_IMR_RXF (0x00000004)
+#define FSL_ESW_IMR_TXB (0x00000008)
+#define FSL_ESW_IMR_TXF (0x00000010)
+#define FSL_ESW_IMR_QM (0x00000020)
+#define FSL_ESW_IMR_OD0 (0x00000040)
+#define FSL_ESW_IMR_OD1 (0x00000080)
+#define FSL_ESW_IMR_OD2 (0x00000100)
+#define FSL_ESW_IMR_LRN (0x00000200)
+
+/* Bit definitions and macros for FSL_ESW_RDSR */
+#define FSL_ESW_RDSR_ADDRESS(x) (((x) & 0x3FFFFFFF) << 2)
+
+/* Bit definitions and macros for FSL_ESW_TDSR */
+#define FSL_ESW_TDSR_ADDRESS(x) (((x) & 0x3FFFFFFF) << 2)
+
+/* Bit definitions and macros for FSL_ESW_MRBR */
+#define FSL_ESW_MRBR_SIZE(x) (((x) & 0x000003FF) << 4)
+
+/* Bit definitions and macros for FSL_ESW_RDAR */
+#define FSL_ESW_RDAR_R_DES_ACTIVE (0x01000000)
+
+/* Bit definitions and macros for FSL_ESW_TDAR */
+#define FSL_ESW_TDAR_X_DES_ACTIVE (0x01000000)
+
+/* Bit definitions and macros for FSL_ESW_LREC0 */
+#define FSL_ESW_LREC0_MACADDR0(x) (((x) & 0xFFFFFFFF) << 0)
+
+/* Bit definitions and macros for FSL_ESW_LREC1 */
+#define FSL_ESW_LREC1_MACADDR1(x) (((x) & 0x0000FFFF) << 0)
+#define FSL_ESW_LREC1_HASH(x) (((x) & 0x000000FF) << 16)
+#define FSL_ESW_LREC1_SWPORT(x) (((x) & 0x00000003) << 24)
+
+/* Bit definitions and macros for FSL_ESW_LSR */
+#define FSL_ESW_LSR_DA (0x00000001)
+
+/* port mirroring port number match */
+#define MIRROR_EGRESS_PORT_MATCH 1
+#define MIRROR_INGRESS_PORT_MATCH 2
+
+/* port mirroring mac address match */
+#define MIRROR_EGRESS_SOURCE_MATCH 1
+#define MIRROR_INGRESS_SOURCE_MATCH 2
+#define MIRROR_EGRESS_DESTINATION_MATCH 3
+#define MIRROR_INGRESS_DESTINATION_MATCH 4
+
+#endif /* FSL_L2_SWITCH_H */
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index d31e944b9c24..f6deb6061715 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -731,8 +731,6 @@ static struct phy_driver ksphy_driver[] = {
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
.driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_KSZ8041RNLI,
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 398ec45aadef..3035d33f5957 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -24,6 +24,7 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/slab.h>
+#include <linux/syscore_ops.h>
#include "../core.h"
#include "pinctrl-imx.h"
@@ -42,6 +43,8 @@ struct imx_pinctrl {
void __iomem *base;
void __iomem *input_sel_base;
const struct imx_pinctrl_soc_info *info;
+ u32 *mux_regs;
+ u32 *input_regs;
};
static const inline struct imx_pin_group *imx_pinctrl_find_group_by_name(
@@ -341,6 +344,36 @@ mux_pin:
return 0;
}
+static void imx_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg;
+ u32 reg;
+
+ /*
+ * Only Vybrid has the input/output buffer enable flags (IBE/OBE)
+ * They are part of the shared mux/conf register.
+ */
+ if (!(info->flags & SHARE_MUX_CONF_REG))
+ return;
+
+ pin_reg = &info->pin_regs[offset];
+ if (pin_reg->mux_reg == -1)
+ return;
+
+ reg = readl(ipctl->base + pin_reg->mux_reg);
+
+ /* Only change pad configuration if pad is still a GPIO */
+ if (reg & (0x7 << 20))
+ return;
+
+ /* Clear IBE/OBE/PUE to disable the pin (Hi-Z) */
+ reg &= ~0x7;
+ writel(reg, ipctl->base + pin_reg->mux_reg);
+}
+
static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool input)
{
@@ -377,6 +410,7 @@ static const struct pinmux_ops imx_pmx_ops = {
.get_function_groups = imx_pmx_get_groups,
.set_mux = imx_pmx_set,
.gpio_request_enable = imx_pmx_gpio_request_enable,
+ .gpio_disable_free = imx_pmx_gpio_disable_free,
.gpio_set_direction = imx_pmx_gpio_set_direction,
};
@@ -689,6 +723,53 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev,
return 0;
}
+static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
+{
+ struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ int i;
+
+ for (i = 0; i < info->npins; i++) {
+ const struct imx_pin_reg *pin_reg = &info->pin_regs[i];
+ if (pin_reg->mux_reg == -1)
+ continue;
+
+ ipctl->mux_regs[i] = readl(ipctl->base + pin_reg->mux_reg);
+ }
+
+ for (i = 0; i < info->ninput_regs; i++)
+ ipctl->input_regs[i] = readl(ipctl->base +
+ info->input_regs_offset + i * sizeof(u32 *));
+
+ return 0;
+}
+
+static int __maybe_unused imx_pinctrl_resume(struct device *dev)
+{
+ struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg;
+ int i;
+
+ for (i = 0; i < info->npins; i++) {
+ pin_reg = &info->pin_regs[i];
+ if (pin_reg->mux_reg == -1)
+ continue;
+
+ writel(ipctl->mux_regs[i], ipctl->base + pin_reg->mux_reg);
+ }
+
+ for (i = 0; i < info->ninput_regs; i++)
+ writel(ipctl->input_regs[i], ipctl->base +
+ info->input_regs_offset + i * sizeof(u32 *));
+
+ return 0;
+}
+
+const struct dev_pm_ops imx_pinctrl_dev_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend, imx_pinctrl_resume)
+};
+
int imx_pinctrl_probe(struct platform_device *pdev,
struct imx_pinctrl_soc_info *info)
{
@@ -719,6 +800,18 @@ int imx_pinctrl_probe(struct platform_device *pdev,
info->pin_regs[i].conf_reg = -1;
}
+#ifdef CONFIG_PM_SLEEP
+ ipctl->mux_regs = devm_kzalloc(&pdev->dev, sizeof(u32 *) *
+ info->npins, GFP_KERNEL);
+ if (!ipctl->mux_regs)
+ return -ENOMEM;
+
+ ipctl->input_regs = devm_kzalloc(&pdev->dev, sizeof(u32 *) *
+ info->ninput_regs, GFP_KERNEL);
+ if (!ipctl->input_regs)
+ return -ENOMEM;
+#endif
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ipctl->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ipctl->base))
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
index 2a592f657c18..56851a66c27b 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.h
+++ b/drivers/pinctrl/freescale/pinctrl-imx.h
@@ -81,6 +81,8 @@ struct imx_pinctrl_soc_info {
unsigned int group_index;
struct imx_pmx_func *functions;
unsigned int nfunctions;
+ unsigned int input_regs_offset;
+ unsigned int ninput_regs;
unsigned int flags;
};
@@ -99,4 +101,5 @@ struct imx_pinctrl_soc_info {
int imx_pinctrl_probe(struct platform_device *pdev,
struct imx_pinctrl_soc_info *info);
int imx_pinctrl_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops imx_pinctrl_dev_pm_ops;
#endif /* __DRIVERS_PINCTRL_IMX_H */
diff --git a/drivers/pinctrl/freescale/pinctrl-vf610.c b/drivers/pinctrl/freescale/pinctrl-vf610.c
index 587d1ff6210e..b6280a8ef958 100644
--- a/drivers/pinctrl/freescale/pinctrl-vf610.c
+++ b/drivers/pinctrl/freescale/pinctrl-vf610.c
@@ -19,6 +19,9 @@
#include "pinctrl-imx.h"
+#define VF610_INPUT_REG_CNT 49
+#define VF610_INPUT_REG_BASE 0x2ec
+
enum vf610_pads {
VF610_PAD_PTA6 = 0,
VF610_PAD_PTA8 = 1,
@@ -299,6 +302,8 @@ static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = {
static struct imx_pinctrl_soc_info vf610_pinctrl_info = {
.pins = vf610_pinctrl_pads,
.npins = ARRAY_SIZE(vf610_pinctrl_pads),
+ .input_regs_offset = VF610_INPUT_REG_BASE,
+ .ninput_regs = VF610_INPUT_REG_CNT,
.flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID,
};
@@ -316,6 +321,7 @@ static struct platform_driver vf610_pinctrl_driver = {
.driver = {
.name = "vf610-pinctrl",
.of_match_table = vf610_pinctrl_of_match,
+ .pm = &imx_pinctrl_dev_pm_ops,
},
.probe = vf610_pinctrl_probe,
.remove = imx_pinctrl_remove,
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 28c711f0ac6b..1dd53b1ebf6b 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -41,6 +41,15 @@ config STE_MODEM_RPROC
This can be either built-in or a loadable module.
If unsure say N.
+config VF610_CM4_RPROC
+ tristate "Freescale Vybrid Cortex-M4 remoteproc support"
+ depends on SOC_VF610
+ select REMOTEPROC
+ select RPMSG
+ help
+ Say y here to support Freescale Vybrid's secondary core via the
+ remote processor framework.
+
config WKUP_M3_RPROC
tristate "AMx3xx Wakeup M3 remoteproc support"
depends on SOC_AM33XX || SOC_AM43XX
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 81b04d1e2e58..df1814ff283c 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -9,5 +9,6 @@ remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o
+obj-$(CONFIG_VF610_CM4_RPROC) += vf610_cm4_rproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 110ed37cbab6..c2daf11c9d12 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -799,12 +799,11 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
struct resource_table *table, *loaded_table;
int ret, tablesz;
- if (!rproc->table_ptr)
- return -ENOMEM;
-
ret = rproc_fw_sanity_check(rproc, fw);
- if (ret)
+ if (ret) {
+ dev_err(dev, "rproc_fw_sanity_check returned %d\n", ret);
return ret;
+ }
dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
@@ -823,20 +822,22 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
/* look for the resource table */
table = rproc_find_rsc_table(rproc, fw, &tablesz);
- if (!table)
- goto clean_up;
-
- /* Verify that resource table in loaded fw is unchanged */
- if (rproc->table_csum != crc32(0, table, tablesz)) {
- dev_err(dev, "resource checksum failed, fw changed?\n");
- goto clean_up;
- }
+ if (!table) {
+ dev_info(dev, "No resource table found, continuing...\n");
+ } else {
+ /* Verify that resource table in loaded fw is unchanged */
+ if (rproc->table_csum != crc32(0, table, tablesz)) {
+ dev_err(dev, "resource checksum failed, fw changed?\n");
+ goto clean_up;
+ }
- /* handle fw resources which are required to boot rproc */
- ret = rproc_handle_resources(rproc, tablesz, rproc_loading_handlers);
- if (ret) {
- dev_err(dev, "Failed to process resources: %d\n", ret);
- goto clean_up;
+ /* handle fw resources which are required to boot rproc */
+ ret = rproc_handle_resources(rproc, tablesz,
+ rproc_loading_handlers);
+ if (ret) {
+ dev_err(dev, "Failed to process resources: %d\n", ret);
+ goto clean_up;
+ }
}
/* load the ELF segments to memory */
@@ -853,14 +854,15 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
* In order to pass this information to the remote device we must
* copy this information to device memory.
*/
- loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
- if (!loaded_table) {
- ret = -EINVAL;
- goto clean_up;
+ if (table) {
+ loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+ if (!loaded_table) {
+ ret = -EINVAL;
+ goto clean_up;
+ }
+ memcpy(loaded_table, rproc->cached_table, tablesz);
}
- memcpy(loaded_table, rproc->cached_table, tablesz);
-
/* power up the remote processor */
ret = rproc->ops->start(rproc);
if (ret) {
diff --git a/drivers/remoteproc/vf610_cm4_rproc.c b/drivers/remoteproc/vf610_cm4_rproc.c
new file mode 100644
index 000000000000..da45162abc12
--- /dev/null
+++ b/drivers/remoteproc/vf610_cm4_rproc.c
@@ -0,0 +1,259 @@
+/*
+ * Freescale VF610 Cortex-M4 Remote Processor driver
+ *
+ * Copyright (C) 2016 Toradex AG
+ *
+ * Based on wkup_m3_rproc.c by:
+ * Copyright (C) 2014-2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+#define CM4_MEM_MAX 2
+
+/*
+ * struct vf610_m4_mem - Cm4 internal memory structure
+ * @cpu_addr: MPU virtual address of the memory region
+ * @bus_addr: Bus address used to access the memory region
+ * @dev_addr: Device address from Wakeup M4 view
+ * @size: Size of the memory region
+ */
+struct vf610_m4_mem {
+ void __iomem *cpu_addr;
+ phys_addr_t bus_addr;
+ u32 dev_addr;
+ size_t size;
+};
+
+/*
+ * struct vf610_m4_rproc - Cm4 remote processor state
+ * @rproc: rproc handle
+ * @pdev: pointer to platform device
+ * @mem: Cm4 memory information
+ */
+struct vf610_m4_rproc {
+ struct rproc *rproc;
+ struct platform_device *pdev;
+ struct vf610_m4_mem mem[CM4_MEM_MAX];
+ struct regmap *ccm;
+ struct regmap *src;
+};
+
+static int vf610_m4_rproc_start(struct rproc *rproc)
+{
+ struct vf610_m4_rproc *cm4 = rproc->priv;
+
+ regmap_write(cm4->src, 0x28, rproc->bootaddr);
+ regmap_write(cm4->ccm, 0x8c, 0x00015a5a);
+
+ return 0;
+}
+
+static int vf610_m4_rproc_stop(struct rproc *rproc)
+{
+ return -EINVAL;
+}
+
+static void *vf610_m4_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+{
+ struct vf610_m4_rproc *cm4 = rproc->priv;
+ void *va = NULL;
+ u32 offset;
+ int i;
+
+ if (len <= 0)
+ return NULL;
+
+ for (i = 0; i < CM4_MEM_MAX; i++) {
+ if (da >= cm4->mem[i].dev_addr && da + len <=
+ cm4->mem[i].dev_addr + cm4->mem[i].size) {
+ offset = da - cm4->mem[i].dev_addr;
+ /* __force to make sparse happy with type conversion */
+ va = (__force void *)(cm4->mem[i].cpu_addr + offset);
+ break;
+ }
+ }
+
+ return va;
+}
+
+static void vf610_m4_rproc_kick(struct rproc *rproc, int vqid)
+{
+ /*
+ * We provide this just to prevent Linux from complaining
+ * and causing a kernel panic.
+ */
+}
+
+static struct rproc_ops vf610_m4_rproc_ops = {
+ .start = vf610_m4_rproc_start,
+ .stop = vf610_m4_rproc_stop,
+ .da_to_va = vf610_m4_rproc_da_to_va,
+ .kick = vf610_m4_rproc_kick,
+};
+
+static const struct of_device_id vf610_m4_rproc_of_match[] = {
+ { .compatible = "fsl,vf610-m4", },
+ {},
+};
+
+static int vf610_m4_rproc_probe(struct platform_device *pdev)
+{
+ const char *mem_names[CM4_MEM_MAX] = { "pc_ocram", "ps_ocram" };
+ struct device *dev = &pdev->dev;
+ struct vf610_m4_rproc *cm4;
+ const char *fw_name;
+ struct rproc *rproc;
+ struct resource *res;
+ const __be32 *addrp;
+ u32 l4_offset = 0;
+ u64 size;
+ int ret;
+ int i, j;
+
+ ret = of_property_read_string(dev->of_node, "fsl,firmware",
+ &fw_name);
+ if (ret) {
+ dev_err(dev, "No firmware filename given\n");
+ return -ENODEV;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+ goto err;
+ }
+
+ rproc = rproc_alloc(dev, "vf610_m4", &vf610_m4_rproc_ops,
+ fw_name, sizeof(*cm4));
+ if (!rproc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ cm4 = rproc->priv;
+ cm4->rproc = rproc;
+ cm4->pdev = pdev;
+
+ cm4->src = syscon_regmap_lookup_by_compatible("fsl,vf610-src");
+ cm4->ccm = syscon_regmap_lookup_by_compatible("fsl,vf610-ccm");
+
+ for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ mem_names[i]);
+
+ /*
+ * The Cortex-M4 has address aliases, which means we
+ * have two device addresses which map to the same
+ * bus address. From Linux side, just use the already
+ * mapped region for those cases.
+ */
+ for (j = i - 1; j >= 0; j--) {
+ if (res->start == cm4->mem[j].bus_addr) {
+ cm4->mem[i].cpu_addr =
+ cm4->mem[j].cpu_addr;
+ break;
+ }
+ }
+
+ /* No previous mapping found, create a new mapping */
+ if (j < 0) {
+ cm4->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cm4->mem[i].cpu_addr)) {
+ dev_err(&pdev->dev,
+ "devm_ioremap_resource failed for resource %d\n", i);
+ ret = PTR_ERR(cm4->mem[i].cpu_addr);
+ goto err;
+ }
+ }
+
+ cm4->mem[i].bus_addr = res->start;
+ cm4->mem[i].size = resource_size(res);
+ addrp = of_get_address(dev->of_node, i, &size, NULL);
+ cm4->mem[i].dev_addr = be32_to_cpu(*addrp) - l4_offset;
+ }
+
+ dev_set_drvdata(dev, rproc);
+
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed\n");
+ goto err_put_rproc;
+ }
+
+ rproc_boot(rproc);
+
+ return 0;
+
+err_put_rproc:
+ rproc_put(rproc);
+err:
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int vf610_m4_rproc_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+
+ rproc_del(rproc);
+ rproc_put(rproc);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int vf610_m4_rpm_suspend(struct device *dev)
+{
+ return -EBUSY;
+}
+
+static int vf610_m4_rpm_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops vf610_m4_rproc_pm_ops = {
+ SET_RUNTIME_PM_OPS(vf610_m4_rpm_suspend, vf610_m4_rpm_resume, NULL)
+};
+
+static struct platform_driver vf610_m4_rproc_driver = {
+ .probe = vf610_m4_rproc_probe,
+ .remove = vf610_m4_rproc_remove,
+ .driver = {
+ .name = "vf610_m4_rproc",
+ .of_match_table = vf610_m4_rproc_of_match,
+ .pm = &vf610_m4_rproc_pm_ops,
+ },
+};
+module_platform_driver(vf610_m4_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Freescale Vybrid Cortex-M4 Remote Processor driver");
+MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index 69a219387582..4f42214bf2d6 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -6,4 +6,16 @@ config RPMSG
select VIRTIO
select VIRTUALIZATION
+config IMX_RPMSG_PINGPONG
+ tristate "IMX RPMSG pingpong driver -- loadable modules only"
+ depends on RPMSG && m
+
+config IMX_RPMSG_TTY
+ tristate "IMX RPMSG tty driver -- loadable modules only"
+ depends on RPMSG && m
+
+config VF610_RPMSG
+ tristate "VF610 RPMSG driver -- loadable modules only"
+ depends on RPMSG && m
+
endmenu
diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
index 7617fcb8259f..c19b2f7b41c4 100644
--- a/drivers/rpmsg/Makefile
+++ b/drivers/rpmsg/Makefile
@@ -1 +1,4 @@
obj-$(CONFIG_RPMSG) += virtio_rpmsg_bus.o
+obj-$(CONFIG_IMX_RPMSG_PINGPONG) += imx_rpmsg_pingpong.o
+obj-$(CONFIG_IMX_RPMSG_TTY) += imx_rpmsg_tty.o
+obj-$(CONFIG_VF610_RPMSG) += vf610_rpmsg.o
diff --git a/drivers/rpmsg/imx_rpmsg_pingpong.c b/drivers/rpmsg/imx_rpmsg_pingpong.c
new file mode 100644
index 000000000000..a6843b360e80
--- /dev/null
+++ b/drivers/rpmsg/imx_rpmsg_pingpong.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * derived from the omap-rpmsg implementation.
+ * Remote processor messaging transport - pingpong driver
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/virtio.h>
+#include <linux/rpmsg.h>
+
+#define MSG "hello world!"
+#define MSG_LIMIT 1000
+static unsigned int rpmsg_pingpong;
+static int rx_count;
+
+static void rpmsg_pingpong_cb(struct rpmsg_channel *rpdev, void *data, int len,
+ void *priv, u32 src)
+{
+ int err;
+
+ /* reply */
+ rpmsg_pingpong = *(unsigned int *)data;
+ pr_info("get %d (src: 0x%x)\n",
+ rpmsg_pingpong, src);
+ rx_count++;
+
+ /* pingpongs should not live forever */
+ if (rx_count >= MSG_LIMIT) {
+ dev_info(&rpdev->dev, "goodbye!\n");
+ return;
+ }
+ rpmsg_pingpong++;
+ err = rpmsg_sendto(rpdev, (void *)(&rpmsg_pingpong), 4, src);
+
+ if (err)
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", err);
+}
+
+static int rpmsg_pingpong_probe(struct rpmsg_channel *rpdev)
+{
+ int err;
+
+ dev_info(&rpdev->dev, "new channel: 0x%x -> 0x%x!\n",
+ rpdev->src, rpdev->dst);
+
+ /*
+ * send a message to our remote processor, and tell remote
+ * processor about this channel
+ */
+ err = rpmsg_send(rpdev, MSG, strlen(MSG));
+ if (err) {
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", err);
+ return err;
+ }
+
+ rpmsg_pingpong = 0;
+ rx_count = 0;
+ err = rpmsg_sendto(rpdev, (void *)(&rpmsg_pingpong), 4, rpdev->dst);
+ if (err) {
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void rpmsg_pingpong_remove(struct rpmsg_channel *rpdev)
+{
+ dev_info(&rpdev->dev, "rpmsg pingpong driver is removed\n");
+}
+
+static struct rpmsg_device_id rpmsg_driver_pingpong_id_table[] = {
+ { .name = "rpmsg-openamp-demo-channel" },
+ { },
+};
+MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_pingpong_id_table);
+
+static struct rpmsg_driver rpmsg_pingpong_driver = {
+ .drv.name = KBUILD_MODNAME,
+ .drv.owner = THIS_MODULE,
+ .id_table = rpmsg_driver_pingpong_id_table,
+ .probe = rpmsg_pingpong_probe,
+ .callback = rpmsg_pingpong_cb,
+ .remove = rpmsg_pingpong_remove,
+};
+
+static int __init init(void)
+{
+ return register_rpmsg_driver(&rpmsg_pingpong_driver);
+}
+
+static void __exit fini(void)
+{
+ unregister_rpmsg_driver(&rpmsg_pingpong_driver);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("iMX virtio remote processor messaging pingpong driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rpmsg/imx_rpmsg_tty.c b/drivers/rpmsg/imx_rpmsg_tty.c
new file mode 100644
index 000000000000..14904c7d517e
--- /dev/null
+++ b/drivers/rpmsg/imx_rpmsg_tty.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * derived from the omap-rpmsg implementation.
+ * Remote processor messaging transport - tty driver
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rpmsg.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/virtio.h>
+
+/*
+ * struct rpmsgtty_port - Wrapper struct for imx rpmsg tty port.
+ * @port: TTY port data
+ */
+struct rpmsgtty_port {
+ struct tty_port port;
+ spinlock_t rx_lock;
+ struct rpmsg_channel *rpdev;
+};
+
+static struct rpmsgtty_port rpmsg_tty_port;
+
+#define RPMSG_MAX_SIZE (512 - sizeof(struct rpmsg_hdr))
+#define MSG "hello world!"
+
+static void rpmsg_tty_cb(struct rpmsg_channel *rpdev, void *data, int len,
+ void *priv, u32 src)
+{
+ int space;
+ unsigned char *cbuf;
+ struct rpmsgtty_port *cport = &rpmsg_tty_port;
+
+ /* flush the recv-ed none-zero data to tty node */
+ if (len == 0)
+ return;
+
+ dev_dbg(&rpdev->dev, "msg(<- src 0x%x) len %d\n", src, len);
+
+ print_hex_dump(KERN_DEBUG, __func__, DUMP_PREFIX_NONE, 16, 1,
+ data, len, true);
+
+ spin_lock_bh(&cport->rx_lock);
+ space = tty_prepare_flip_string(&cport->port, &cbuf, len);
+ if (space <= 0) {
+ dev_err(&rpdev->dev, "No memory for tty_prepare_flip_string\n");
+ spin_unlock_bh(&cport->rx_lock);
+ return;
+ }
+
+ memcpy(cbuf, data, len);
+ tty_flip_buffer_push(&cport->port);
+ spin_unlock_bh(&cport->rx_lock);
+}
+
+static struct tty_port_operations rpmsgtty_port_ops = { };
+
+static int rpmsgtty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ return tty_port_install(&rpmsg_tty_port.port, driver, tty);
+}
+
+static int rpmsgtty_open(struct tty_struct *tty, struct file *filp)
+{
+ return tty_port_open(tty->port, tty, filp);
+}
+
+static void rpmsgtty_close(struct tty_struct *tty, struct file *filp)
+{
+ return tty_port_close(tty->port, tty, filp);
+}
+
+static int rpmsgtty_write(struct tty_struct *tty, const unsigned char *buf,
+ int total)
+{
+ int count, ret = 0;
+ const unsigned char *tbuf;
+ struct rpmsgtty_port *rptty_port = container_of(tty->port,
+ struct rpmsgtty_port, port);
+ struct rpmsg_channel *rpdev = rptty_port->rpdev;
+
+ if (NULL == buf) {
+ pr_err("buf shouldn't be null.\n");
+ return -ENOMEM;
+ }
+
+ count = total;
+ tbuf = buf;
+ do {
+ /* send a message to our remote processor */
+ ret = rpmsg_send(rpdev, (void *)tbuf,
+ count > RPMSG_MAX_SIZE ? RPMSG_MAX_SIZE : count);
+ if (ret) {
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
+ return ret;
+ }
+
+ if (count > RPMSG_MAX_SIZE) {
+ count -= RPMSG_MAX_SIZE;
+ tbuf += RPMSG_MAX_SIZE;
+ } else {
+ count = 0;
+ }
+ } while (count > 0);
+
+ return total;
+}
+
+static int rpmsgtty_write_room(struct tty_struct *tty)
+{
+ /* report the space in the rpmsg buffer */
+ return RPMSG_MAX_SIZE;
+}
+
+static const struct tty_operations imxrpmsgtty_ops = {
+ .install = rpmsgtty_install,
+ .open = rpmsgtty_open,
+ .close = rpmsgtty_close,
+ .write = rpmsgtty_write,
+ .write_room = rpmsgtty_write_room,
+};
+
+static struct tty_driver *rpmsgtty_driver;
+
+static int rpmsg_tty_probe(struct rpmsg_channel *rpdev)
+{
+ int err;
+ struct rpmsgtty_port *cport = &rpmsg_tty_port;
+
+ dev_info(&rpdev->dev, "new channel: 0x%x -> 0x%x!\n",
+ rpdev->src, rpdev->dst);
+
+ /*
+ * send a message to our remote processor, and tell remote
+ * processor about this channel
+ */
+ err = rpmsg_send(rpdev, MSG, strlen(MSG));
+ if (err) {
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", err);
+ return err;
+ }
+
+ rpmsgtty_driver = tty_alloc_driver(1, TTY_DRIVER_UNNUMBERED_NODE);
+ if (IS_ERR(rpmsgtty_driver))
+ return PTR_ERR(rpmsgtty_driver);
+
+ rpmsgtty_driver->driver_name = "rpmsg_tty";
+ rpmsgtty_driver->name = "ttyRPMSG";
+ rpmsgtty_driver->major = TTYAUX_MAJOR;
+ rpmsgtty_driver->minor_start = 3;
+ rpmsgtty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
+ rpmsgtty_driver->init_termios = tty_std_termios;
+
+ tty_set_operations(rpmsgtty_driver, &imxrpmsgtty_ops);
+
+ tty_port_init(&cport->port);
+ cport->port.ops = &rpmsgtty_port_ops;
+ spin_lock_init(&cport->rx_lock);
+ cport->port.low_latency = cport->port.flags | ASYNC_LOW_LATENCY;
+
+ err = tty_register_driver(rpmsgtty_driver);
+ if (err < 0) {
+ pr_err("Couldn't install rpmsg tty driver: err %d\n", err);
+ goto error;
+ } else
+ pr_info("Install rpmsg tty driver!\n");
+ cport->rpdev = rpdev;
+
+ return 0;
+
+error:
+ tty_unregister_driver(rpmsgtty_driver);
+ put_tty_driver(rpmsgtty_driver);
+ tty_port_destroy(&cport->port);
+ rpmsgtty_driver = NULL;
+
+ return err;
+}
+
+static void rpmsg_tty_remove(struct rpmsg_channel *rpdev)
+{
+ struct rpmsgtty_port *cport = &rpmsg_tty_port;
+
+ dev_info(&rpdev->dev, "rpmsg tty driver is removed\n");
+
+ tty_unregister_driver(rpmsgtty_driver);
+ put_tty_driver(rpmsgtty_driver);
+ tty_port_destroy(&cport->port);
+ rpmsgtty_driver = NULL;
+}
+
+static struct rpmsg_device_id rpmsg_driver_tty_id_table[] = {
+ { .name = "rpmsg-openamp-demo-channel" },
+ { },
+};
+MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_tty_id_table);
+
+static struct rpmsg_driver rpmsg_tty_driver = {
+ .drv.name = KBUILD_MODNAME,
+ .drv.owner = THIS_MODULE,
+ .id_table = rpmsg_driver_tty_id_table,
+ .probe = rpmsg_tty_probe,
+ .callback = rpmsg_tty_cb,
+ .remove = rpmsg_tty_remove,
+};
+
+static int __init init(void)
+{
+ return register_rpmsg_driver(&rpmsg_tty_driver);
+}
+
+static void __exit fini(void)
+{
+ unregister_rpmsg_driver(&rpmsg_tty_driver);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("iMX virtio remote processor messaging tty driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rpmsg/vf610_rpmsg.c b/drivers/rpmsg/vf610_rpmsg.c
new file mode 100644
index 000000000000..72ce28c7d13e
--- /dev/null
+++ b/drivers/rpmsg/vf610_rpmsg.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2016 Toradex AG
+ *
+ * Derived from the downstream iMX7 rpmsg implementation by Freescale.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/vf610_mscm.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <linux/vf610_sema4.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_ring.h>
+
+struct vf610_rpmsg_vproc {
+ struct virtio_device vdev;
+ unsigned int vring[2];
+ char *rproc_name;
+ struct mutex lock;
+ struct delayed_work rpmsg_work;
+ struct virtqueue *vq[2];
+ int base_vq_id;
+ int num_of_vqs;
+};
+
+#define MSCM_CPU_M4 1
+
+/*
+ * For now, allocate 256 buffers of 512 bytes for each side. each buffer
+ * will then have 16B for the msg header and 496B for the payload.
+ * This will require a total space of 256KB for the buffers themselves, and
+ * 3 pages for every vring (the size of the vring depends on the number of
+ * buffers it supports).
+ */
+#define RPMSG_NUM_BUFS (32)
+#define RPMSG_BUF_SIZE (512)
+#define RPMSG_BUFS_SPACE (RPMSG_NUM_BUFS * RPMSG_BUF_SIZE)
+
+/*
+ * The alignment between the consumer and producer parts of the vring.
+ * Note: this is part of the "wire" protocol. If you change this, you need
+ * to update your BIOS image as well
+ */
+#define RPMSG_VRING_ALIGN (4096)
+
+/* With 256 buffers, our vring will occupy 3 pages */
+#define RPMSG_RING_SIZE ((DIV_ROUND_UP(vring_size(RPMSG_NUM_BUFS / 2, \
+ RPMSG_VRING_ALIGN), PAGE_SIZE)) * PAGE_SIZE)
+
+#define to_vf610_rpdev(vd) container_of(vd, struct vf610_rpmsg_vproc, vdev)
+
+struct vf610_rpmsg_vq_info {
+ __u16 num; /* number of entries in the virtio_ring */
+ __u16 vq_id; /* a globaly unique index of this virtqueue */
+ void *addr; /* address where we mapped the virtio ring */
+ struct vf610_rpmsg_vproc *rpdev;
+};
+
+static struct vf610_sema4_mutex *rpmsg_mutex;
+
+static u64 vf610_rpmsg_get_features(struct virtio_device *vdev)
+{
+ return 1 << VIRTIO_RPMSG_F_NS;
+}
+
+static int vf610_rpmsg_finalize_features(struct virtio_device *vdev)
+{
+ /* Give virtio_ring a chance to accept features */
+ vring_transport_features(vdev);
+
+ return 0;
+}
+
+/* kick the remote processor */
+static bool vf610_rpmsg_notify(struct virtqueue *vq)
+{
+ struct vf610_rpmsg_vq_info *rpvq = vq->priv;
+
+ mutex_lock(&rpvq->rpdev->lock);
+
+ mscm_trigger_cpu2cpu_irq(rpvq->vq_id, MSCM_CPU_M4);
+
+ mutex_unlock(&rpvq->rpdev->lock);
+
+ return true;
+}
+
+static void rpmsg_work_handler(struct work_struct *work)
+{
+ struct vf610_rpmsg_vproc *rpdev = container_of(work,
+ struct vf610_rpmsg_vproc, rpmsg_work.work);
+
+ /* Process incoming buffers on all our vrings */
+ vring_interrupt(0, rpdev->vq[0]);
+ vring_interrupt(1, rpdev->vq[1]);
+}
+
+static irqreturn_t cpu_to_cpu_irq_handler(int irq, void *p)
+{
+ struct vf610_rpmsg_vproc *rpdev = (struct vf610_rpmsg_vproc *)p;
+
+ schedule_delayed_work(&rpdev->rpmsg_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+static struct virtqueue *rp_find_vq(struct virtio_device *vdev,
+ unsigned index,
+ void (*callback)(struct virtqueue *vq),
+ const char *name)
+{
+ struct vf610_rpmsg_vproc *rpdev = to_vf610_rpdev(vdev);
+ struct vf610_rpmsg_vq_info *rpvq;
+ struct virtqueue *vq;
+ int err;
+
+ rpvq = kmalloc(sizeof(*rpvq), GFP_KERNEL);
+ if (!rpvq)
+ return ERR_PTR(-ENOMEM);
+
+ /* ioremap'ing normal memory, so we cast away sparse's complaints */
+ rpvq->addr = (__force void *) ioremap_nocache(rpdev->vring[index],
+ RPMSG_RING_SIZE);
+ if (!rpvq->addr) {
+ err = -ENOMEM;
+ goto free_rpvq;
+ }
+
+ memset(rpvq->addr, 0, RPMSG_RING_SIZE);
+
+ pr_debug("vring%d: phys 0x%x, virt 0x%x\n", index, rpdev->vring[index],
+ (unsigned int) rpvq->addr);
+
+ vq = vring_new_virtqueue(index, RPMSG_NUM_BUFS, RPMSG_VRING_ALIGN,
+ vdev, true, rpvq->addr, vf610_rpmsg_notify, callback,
+ name);
+ if (!vq) {
+ pr_err("vring_new_virtqueue failed\n");
+ err = -ENOMEM;
+ goto unmap_vring;
+ }
+
+ rpdev->vq[index] = vq;
+ vq->priv = rpvq;
+ /* system-wide unique id for this virtqueue */
+ rpvq->vq_id = rpdev->base_vq_id + index;
+ rpvq->rpdev = rpdev;
+ mutex_init(&rpdev->lock);
+
+ return vq;
+
+unmap_vring:
+ /* iounmap normal memory, so make sparse happy */
+ iounmap((__force void __iomem *) rpvq->addr);
+free_rpvq:
+ kfree(rpvq);
+ return ERR_PTR(err);
+}
+
+static void vf610_rpmsg_del_vqs(struct virtio_device *vdev)
+{
+ struct virtqueue *vq, *n;
+
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+ struct vf610_rpmsg_vq_info *rpvq = vq->priv;
+ iounmap(rpvq->addr);
+ vring_del_virtqueue(vq);
+ kfree(rpvq);
+ }
+}
+
+static int vf610_rpmsg_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[])
+{
+ struct vf610_rpmsg_vproc *rpdev = to_vf610_rpdev(vdev);
+ int i, err;
+
+ /* we maintain two virtqueues per remote processor (for RX and TX) */
+ if (nvqs != 2)
+ return -EINVAL;
+
+ for (i = 0; i < nvqs; ++i) {
+ vqs[i] = rp_find_vq(vdev, i, callbacks[i], names[i]);
+ if (IS_ERR(vqs[i])) {
+ err = PTR_ERR(vqs[i]);
+ goto error;
+ }
+ }
+
+ rpdev->num_of_vqs = nvqs;
+
+ return 0;
+
+error:
+ vf610_rpmsg_del_vqs(vdev);
+ return err;
+}
+
+static void vf610_rpmsg_reset(struct virtio_device *vdev)
+{
+ dev_dbg(&vdev->dev, "reset !\n");
+}
+
+static u8 vf610_rpmsg_get_status(struct virtio_device *vdev)
+{
+ return 0;
+}
+
+static void vf610_rpmsg_set_status(struct virtio_device *vdev, u8 status)
+{
+ dev_dbg(&vdev->dev, "%s new status: %d\n", __func__, status);
+}
+
+static void vf610_rpmsg_vproc_release(struct device *dev)
+{
+ /* this handler is provided so driver core doesn't yell at us */
+}
+
+static struct virtio_config_ops vf610_rpmsg_config_ops = {
+ .get_features = vf610_rpmsg_get_features,
+ .finalize_features = vf610_rpmsg_finalize_features,
+ .find_vqs = vf610_rpmsg_find_vqs,
+ .del_vqs = vf610_rpmsg_del_vqs,
+ .reset = vf610_rpmsg_reset,
+ .set_status = vf610_rpmsg_set_status,
+ .get_status = vf610_rpmsg_get_status,
+};
+
+static struct vf610_rpmsg_vproc vf610_rpmsg_vprocs = {
+ .vdev.id.device = VIRTIO_ID_RPMSG,
+ .vdev.config = &vf610_rpmsg_config_ops,
+ .rproc_name = "vf610_m4",
+ .base_vq_id = 0,
+};
+
+static const struct of_device_id vf610_rpmsg_dt_ids[] = {
+ { .compatible = "fsl,vf610-rpmsg", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_rpmsg_dt_ids);
+
+static int vf610_rpmsg_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret = 0;
+ struct vf610_rpmsg_vproc *rpdev = &vf610_rpmsg_vprocs;
+
+ INIT_DELAYED_WORK(&rpdev->rpmsg_work, rpmsg_work_handler);
+
+ rpdev->vring[0] = 0x3f070000;
+ rpdev->vring[1] = 0x3f074000;
+
+ rpdev->vdev.dev.parent = &pdev->dev;
+ rpdev->vdev.dev.release = vf610_rpmsg_vproc_release;
+
+ ret = register_virtio_device(&rpdev->vdev);
+ if (ret) {
+ pr_err("%s failed to register rpdev: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ for (i = 0; i < 2; i++) {
+ ret = mscm_request_cpu2cpu_irq(i, cpu_to_cpu_irq_handler,
+ (const char *)rpdev->rproc_name, rpdev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to register CPU2CPU interrupt\n");
+ unregister_virtio_device(&rpdev->vdev);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int vf610_rpmsg_remove(struct platform_device *pdev)
+{
+ struct vf610_rpmsg_vproc *rpdev = &vf610_rpmsg_vprocs;
+ int i;
+
+ for (i = 0; i < 2; i++)
+ mscm_free_cpu2cpu_irq(i, NULL);
+
+ unregister_virtio_device(&rpdev->vdev);
+
+ return 0;
+}
+
+static struct platform_driver vf610_rpmsg_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "vf610-rpmsg",
+ .of_match_table = vf610_rpmsg_dt_ids,
+ },
+ .probe = vf610_rpmsg_probe,
+ .remove = vf610_rpmsg_remove,
+};
+
+static int __init vf610_rpmsg_init(void)
+{
+ int ret;
+
+ rpmsg_mutex = vf610_sema4_mutex_create(0, 0);
+ if (IS_ERR(rpmsg_mutex)) {
+ pr_err("vf610 rpmsg unable to create mutex\n");
+ return PTR_ERR(rpmsg_mutex);
+ }
+
+ vf610_sema4_mutex_lock(rpmsg_mutex);
+
+ ret = platform_driver_register(&vf610_rpmsg_driver);
+ if (ret)
+ pr_err("Unable to initialize rpmsg driver\n");
+ else
+ pr_info("vf610 rpmsg driver is registered.\n");
+
+ vf610_sema4_mutex_unlock(rpmsg_mutex);
+
+ return ret;
+}
+
+static void __exit vf610_rpmsg_exit(void)
+{
+ if (rpmsg_mutex)
+ vf610_sema4_mutex_destroy(rpmsg_mutex);
+
+ pr_info("vf610 rpmsg driver is unregistered.\n");
+ platform_driver_unregister(&vf610_rpmsg_driver);
+}
+module_exit(vf610_rpmsg_exit);
+module_init(vf610_rpmsg_init);
+
+MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
+MODULE_DESCRIPTION("vf610 remote processor messaging virtio device");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index aa705bb4748c..097ca2a8565f 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -34,6 +34,7 @@ enum ds_type {
ds_1340,
ds_1388,
ds_3231,
+ m41t0,
m41t00,
mcp794xx,
rx_8025,
@@ -48,6 +49,7 @@ enum ds_type {
# define DS1340_BIT_nEOSC 0x80
# define MCP794XX_BIT_ST 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
+# define M41T0_BIT_OF 0x80
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
@@ -174,6 +176,7 @@ static const struct i2c_device_id ds1307_id[] = {
{ "ds1388", ds_1388 },
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
+ { "m41t0", m41t0 },
{ "m41t00", m41t00 },
{ "mcp7940x", mcp794xx },
{ "mcp7941x", mcp794xx },
@@ -363,6 +366,13 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
+ /* if oscillator fail bit is set, no data can be trusted */
+ if (ds1307->type == m41t0 &&
+ ds1307->regs[DS1307_REG_MIN] & M41T0_BIT_OF) {
+ dev_warn_once(dev, "oscillator failed, set time!\n");
+ return -EINVAL;
+ }
+
t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
@@ -1044,6 +1054,7 @@ read_rtc:
tmp = ds1307->regs[DS1307_REG_SECS];
switch (ds1307->type) {
case ds_1307:
+ case m41t0:
case m41t00:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1307_BIT_CH) {
@@ -1108,6 +1119,7 @@ read_rtc:
tmp = ds1307->regs[DS1307_REG_HOUR];
switch (ds1307->type) {
case ds_1340:
+ case m41t0:
case m41t00:
/*
* NOTE: ignores century bits; fix before deploying
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 4e853ed2c82b..9864fd55a0ab 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,6 +1,7 @@
menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/brcmstb/Kconfig"
+source "drivers/soc/fsl/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index f2ba2e932ae1..21c9c3a0c98f 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
+obj-$(CONFIG_SOC_VF610) += fsl/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 000000000000..5568c34474f7
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,10 @@
+#
+# Freescale SoC drivers
+
+config SOC_BUS_VF610
+ tristate "SoC bus device for the Freescale Vybrid platform"
+ depends on SOC_VF610 && NVMEM && NVMEM_VF610_OCOTP
+ select SOC_BUS
+ help
+ Include support for the SoC bus on the Freescale Vybrid platform
+ providing some sysfs information about the module variant.
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
new file mode 100644
index 000000000000..41ee22fe311f
--- /dev/null
+++ b/drivers/soc/fsl/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SOC_BUS_VF610) += soc-vf610.o
diff --git a/drivers/soc/fsl/soc-vf610.c b/drivers/soc/fsl/soc-vf610.c
new file mode 100644
index 000000000000..1db42c7442f6
--- /dev/null
+++ b/drivers/soc/fsl/soc-vf610.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2016 Toradex AG.
+ *
+ * Author: Sanchayan Maity <sanchayan.maity@toradex.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+struct vf610_soc {
+ struct device *dev;
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct nvmem_cell *ocotp_cfg0;
+ struct nvmem_cell *ocotp_cfg1;
+};
+
+static int vf610_soc_probe(struct platform_device *pdev)
+{
+ struct vf610_soc *info;
+ struct device *dev = &pdev->dev;
+ struct device_node *soc_node;
+ char soc_type[] = "xx0";
+ size_t id1_len;
+ size_t id2_len;
+ u32 cpucount;
+ u32 l2size;
+ u32 rom_rev;
+ u8 *socid1;
+ u8 *socid2;
+ char *socid;
+ int ret;
+
+ info = devm_kzalloc(dev, sizeof(struct vf610_soc), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->dev = dev;
+
+ info->ocotp_cfg0 = devm_nvmem_cell_get(dev, "cfg0");
+ if (IS_ERR(info->ocotp_cfg0))
+ return -EPROBE_DEFER;
+
+ info->ocotp_cfg1 = devm_nvmem_cell_get(dev, "cfg1");
+ if (IS_ERR(info->ocotp_cfg1))
+ return -EPROBE_DEFER;
+
+ socid1 = nvmem_cell_read(info->ocotp_cfg0, &id1_len);
+ if (IS_ERR(socid1)) {
+ dev_err(dev, "Could not read nvmem cell %ld\n",
+ PTR_ERR(socid1));
+ return PTR_ERR(socid1);
+ }
+
+ socid2 = nvmem_cell_read(info->ocotp_cfg1, &id2_len);
+ if (IS_ERR(socid2)) {
+ dev_err(dev, "Could not read nvmem cell %ld\n",
+ PTR_ERR(socid2));
+ kfree(socid1);
+ return PTR_ERR(socid2);
+ }
+ add_device_randomness(socid1, id1_len);
+ add_device_randomness(socid2, id2_len);
+
+ socid = devm_kasprintf(dev, GFP_KERNEL,
+ "%02x%02x%02x%02x%02x%02x%02x%02x",
+ socid1[3], socid1[2], socid1[1], socid1[0],
+ socid2[3], socid2[2], socid2[1], socid2[0]);
+
+ kfree(socid1);
+ kfree(socid2);
+
+
+ soc_node = of_find_node_by_path("/soc");
+ if (soc_node == NULL)
+ return -ENODEV;
+
+ ret = syscon_regmap_read_from_offset(soc_node,
+ "fsl,rom-revision", &rom_rev);
+ if (ret) {
+ of_node_put(soc_node);
+ return ret;
+ }
+
+ ret = syscon_regmap_read_from_offset(soc_node,
+ "fsl,cpu-count", &cpucount);
+ if (ret) {
+ of_node_put(soc_node);
+ return ret;
+ }
+
+ ret = syscon_regmap_read_from_offset(soc_node,
+ "fsl,l2-size", &l2size);
+ if (ret) {
+ of_node_put(soc_node);
+ return ret;
+ }
+
+ of_node_put(soc_node);
+
+ soc_type[0] = cpucount ? '6' : '5'; /* Dual Core => VF6x0 */
+ soc_type[1] = l2size ? '1' : '0'; /* L2 Cache => VFx10 */
+
+ info->soc_dev_attr = devm_kzalloc(dev,
+ sizeof(info->soc_dev_attr), GFP_KERNEL);
+ if (!info->soc_dev_attr)
+ return -ENOMEM;
+
+ info->soc_dev_attr->machine = devm_kasprintf(dev,
+ GFP_KERNEL, "Freescale Vybrid");
+ info->soc_dev_attr->soc_id = socid;
+ info->soc_dev_attr->family = devm_kasprintf(&pdev->dev,
+ GFP_KERNEL, "Freescale Vybrid VF%s",
+ soc_type);
+ info->soc_dev_attr->revision = devm_kasprintf(dev,
+ GFP_KERNEL, "%08x", rom_rev);
+
+ platform_set_drvdata(pdev, info);
+
+ info->soc_dev = soc_device_register(info->soc_dev_attr);
+ if (IS_ERR(info->soc_dev))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int vf610_soc_remove(struct platform_device *pdev)
+{
+ struct vf610_soc *info = platform_get_drvdata(pdev);
+
+ if (info->soc_dev)
+ soc_device_unregister(info->soc_dev);
+
+ return 0;
+}
+
+static const struct of_device_id vf610_soc_bus_match[] = {
+ { .compatible = "fsl,vf610-soc-bus", },
+ { /* */ }
+};
+
+static struct platform_driver vf610_soc_driver = {
+ .probe = vf610_soc_probe,
+ .remove = vf610_soc_remove,
+ .driver = {
+ .name = "vf610-soc-bus",
+ .of_match_table = vf610_soc_bus_match,
+ },
+};
+module_platform_driver(vf610_soc_driver);
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index a3965cac1b34..e280c6179e57 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -15,6 +15,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -40,6 +42,7 @@
#define TRAN_STATE_WORD_ODD_NUM 0x04
#define DSPI_FIFO_SIZE 4
+#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024)
#define SPI_MCR 0x00
#define SPI_MCR_MASTER (1 << 31)
@@ -71,6 +74,11 @@
#define SPI_SR_EOQF 0x10000000
#define SPI_SR_TCFQF 0x80000000
+#define SPI_RSER_TFFFE BIT(25)
+#define SPI_RSER_TFFFD BIT(24)
+#define SPI_RSER_RFDFE BIT(17)
+#define SPI_RSER_RFDFD BIT(16)
+
#define SPI_RSER 0x30
#define SPI_RSER_EOQFE 0x10000000
#define SPI_RSER_TCFQE 0x80000000
@@ -108,6 +116,8 @@
#define SPI_TCR_TCNT_MAX 0x10000
+#define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000)
+
struct chip_data {
u32 mcr_val;
u32 ctar_val;
@@ -117,22 +127,43 @@ struct chip_data {
enum dspi_trans_mode {
DSPI_EOQ_MODE = 0,
DSPI_TCFQ_MODE,
+ DSPI_DMA_MODE,
};
struct fsl_dspi_devtype_data {
enum dspi_trans_mode trans_mode;
+ u8 max_clock_factor;
};
static const struct fsl_dspi_devtype_data vf610_data = {
.trans_mode = DSPI_EOQ_MODE,
+ .max_clock_factor = 2,
};
static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
.trans_mode = DSPI_TCFQ_MODE,
+ .max_clock_factor = 8,
};
static const struct fsl_dspi_devtype_data ls2085a_data = {
.trans_mode = DSPI_TCFQ_MODE,
+ .max_clock_factor = 8,
+};
+
+struct fsl_dspi_dma {
+ u32 curr_xfer_len;
+
+ u32 *tx_dma_buf;
+ struct dma_chan *chan_tx;
+ dma_addr_t tx_dma_phys;
+ struct completion cmd_tx_complete;
+ struct dma_async_tx_descriptor *tx_desc;
+
+ u32 *rx_dma_buf;
+ struct dma_chan *chan_rx;
+ dma_addr_t rx_dma_phys;
+ struct completion cmd_rx_complete;
+ struct dma_async_tx_descriptor *rx_desc;
};
struct fsl_dspi {
@@ -161,8 +192,11 @@ struct fsl_dspi {
u32 waitflags;
u32 spi_tcnt;
+ struct fsl_dspi_dma *dma;
};
+static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word);
+
static inline int is_double_byte_mode(struct fsl_dspi *dspi)
{
unsigned int val;
@@ -364,6 +398,256 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
dspi_data_from_popr(dspi, rx_word);
}
+static void dspi_tx_dma_callback(void *arg)
+{
+ struct fsl_dspi *dspi = arg;
+ struct fsl_dspi_dma *dma = dspi->dma;
+
+ complete(&dma->cmd_tx_complete);
+}
+
+static void dspi_rx_dma_callback(void *arg)
+{
+ struct fsl_dspi *dspi = arg;
+ struct fsl_dspi_dma *dma = dspi->dma;
+ int rx_word;
+ int i;
+ u16 d;
+
+ rx_word = is_double_byte_mode(dspi);
+
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
+ for (i = 0; i < dma->curr_xfer_len; i++) {
+ d = dspi->dma->rx_dma_buf[i];
+ rx_word ? (*(u16 *)dspi->rx = d) :
+ (*(u8 *)dspi->rx = d);
+ dspi->rx += rx_word + 1;
+ }
+ }
+
+ complete(&dma->cmd_rx_complete);
+}
+
+static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+ int time_left;
+ int tx_word;
+ int i;
+
+ tx_word = is_double_byte_mode(dspi);
+
+ for (i = 0; i < dma->curr_xfer_len; i++) {
+ dspi->dma->tx_dma_buf[i] = dspi_data_to_pushr(dspi, tx_word);
+ if ((dspi->cs_change) && (!dspi->len))
+ dspi->dma->tx_dma_buf[i] &= ~SPI_PUSHR_CONT;
+ }
+
+ dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
+ dma->tx_dma_phys,
+ dma->curr_xfer_len *
+ DMA_SLAVE_BUSWIDTH_4_BYTES,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma->tx_desc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ return -EIO;
+ }
+
+ dma->tx_desc->callback = dspi_tx_dma_callback;
+ dma->tx_desc->callback_param = dspi;
+ if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
+ dev_err(dev, "DMA submit failed\n");
+ return -EINVAL;
+ }
+
+ dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
+ dma->rx_dma_phys,
+ dma->curr_xfer_len *
+ DMA_SLAVE_BUSWIDTH_4_BYTES,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma->rx_desc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ return -EIO;
+ }
+
+ dma->rx_desc->callback = dspi_rx_dma_callback;
+ dma->rx_desc->callback_param = dspi;
+ if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
+ dev_err(dev, "DMA submit failed\n");
+ return -EINVAL;
+ }
+
+ reinit_completion(&dspi->dma->cmd_rx_complete);
+ reinit_completion(&dspi->dma->cmd_tx_complete);
+
+ dma_async_issue_pending(dma->chan_rx);
+ dma_async_issue_pending(dma->chan_tx);
+
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
+ DMA_COMPLETION_TIMEOUT);
+ if (time_left == 0) {
+ dev_err(dev, "DMA tx timeout\n");
+ dmaengine_terminate_all(dma->chan_tx);
+ dmaengine_terminate_all(dma->chan_rx);
+ return -ETIMEDOUT;
+ }
+
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
+ DMA_COMPLETION_TIMEOUT);
+ if (time_left == 0) {
+ dev_err(dev, "DMA rx timeout\n");
+ dmaengine_terminate_all(dma->chan_tx);
+ dmaengine_terminate_all(dma->chan_rx);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int dspi_dma_xfer(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+ int curr_remaining_bytes;
+ int bytes_per_buffer;
+ int word = 1;
+ int ret = 0;
+
+ if(is_double_byte_mode(dspi))
+ word = 2;
+ curr_remaining_bytes = dspi->len;
+ bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
+ while (curr_remaining_bytes) {
+ /* Check if current transfer fits the DMA buffer */
+ dma->curr_xfer_len = curr_remaining_bytes / word;
+ if (dma->curr_xfer_len > bytes_per_buffer)
+ dma->curr_xfer_len = bytes_per_buffer;
+
+ ret = dspi_next_xfer_dma_submit(dspi);
+ if (ret) {
+ dev_err(dev, "DMA transfer failed\n");
+ goto exit;
+
+ } else {
+ curr_remaining_bytes -= dma->curr_xfer_len * word;
+ if (curr_remaining_bytes < 0)
+ curr_remaining_bytes = 0;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
+{
+ struct fsl_dspi_dma *dma;
+ struct dma_slave_config cfg;
+ struct device *dev = &dspi->pdev->dev;
+ int ret;
+
+ dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
+
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
+ if (!dma->chan_rx) {
+ dev_err(dev, "rx dma channel not available\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
+ if (!dma->chan_tx) {
+ dev_err(dev, "tx dma channel not available\n");
+ ret = -ENODEV;
+ goto err_tx_channel;
+ }
+
+ dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ &dma->tx_dma_phys, GFP_KERNEL);
+ if (!dma->tx_dma_buf) {
+ ret = -ENOMEM;
+ goto err_tx_dma_buf;
+ }
+
+ dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ &dma->rx_dma_phys, GFP_KERNEL);
+ if (!dma->rx_dma_buf) {
+ ret = -ENOMEM;
+ goto err_rx_dma_buf;
+ }
+
+ cfg.src_addr = phy_addr + SPI_POPR;
+ cfg.dst_addr = phy_addr + SPI_PUSHR;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = 1;
+ cfg.dst_maxburst = 1;
+
+ cfg.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &cfg);
+ if (ret) {
+ dev_err(dev, "can't configure rx dma channel\n");
+ ret = -EINVAL;
+ goto err_slave_config;
+ }
+
+ cfg.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &cfg);
+ if (ret) {
+ dev_err(dev, "can't configure tx dma channel\n");
+ ret = -EINVAL;
+ goto err_slave_config;
+ }
+
+ dspi->dma = dma;
+ dspi->devtype_data->trans_mode = DSPI_DMA_MODE;
+ init_completion(&dma->cmd_tx_complete);
+ init_completion(&dma->cmd_rx_complete);
+
+ return 0;
+
+err_slave_config:
+ dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
+ dma->rx_dma_buf, dma->rx_dma_phys);
+err_rx_dma_buf:
+ dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
+ dma->tx_dma_buf, dma->rx_dma_phys);
+err_tx_dma_buf:
+ dma_release_channel(dma->chan_tx);
+err_tx_channel:
+ dma_release_channel(dma->chan_rx);
+
+ devm_kfree(dev, dma);
+ dspi->dma = NULL;
+
+ return ret;
+}
+
+static void dspi_release_dma(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+
+ if (dma) {
+ if (dma->chan_tx) {
+ dma_unmap_single(dev, dma->tx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
+ dma_release_channel(dma->chan_tx);
+ }
+
+ if (dma->chan_rx) {
+ dma_unmap_single(dev, dma->rx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
+ dma_release_channel(dma->chan_rx);
+ }
+ }
+}
+
static int dspi_transfer_one_message(struct spi_master *master,
struct spi_message *message)
{
@@ -420,6 +704,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
dspi_tcfq_write(dspi);
break;
+ case DSPI_DMA_MODE:
+ regmap_write(dspi->regmap, SPI_RSER,
+ SPI_RSER_TFFFE | SPI_RSER_TFFFD |
+ SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+ status = dspi_dma_xfer(dspi);
+ break;
default:
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
trans_mode);
@@ -427,9 +717,13 @@ static int dspi_transfer_one_message(struct spi_master *master,
goto out;
}
- if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
- dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
- dspi->waitflags = 0;
+ if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE) {
+ if (wait_event_interruptible(dspi->waitq,
+ dspi->waitflags))
+ dev_err(&dspi->pdev->dev,
+ "wait transfer complete fail!\n");
+ dspi->waitflags = 0;
+ }
if (transfer->delay_usecs)
udelay(transfer->delay_usecs);
@@ -726,6 +1020,12 @@ static int dspi_probe(struct platform_device *pdev)
}
clk_prepare_enable(dspi->clk);
+ if (dspi_request_dma(dspi, res->start))
+ dev_warn(&pdev->dev, "can't get dma channels\n");
+
+ master->max_speed_hz =
+ clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
+
init_waitqueue_head(&dspi->waitq);
platform_set_drvdata(pdev, master);
@@ -751,6 +1051,7 @@ static int dspi_remove(struct platform_device *pdev)
struct fsl_dspi *dspi = spi_master_get_devdata(master);
/* Disconnect from the SPI framework */
+ dspi_release_dma(dspi);
clk_disable_unprepare(dspi->clk);
spi_unregister_master(dspi->master);
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 7969f5484aee..e4a0ff94ab78 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -698,6 +698,7 @@ static struct class *spidev_class;
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
{ .compatible = "lineartechnology,ltc2488" },
+ { .compatible = "toradex,evalspi" },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 1544a7cc76ff..9e5362a3c2d4 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -224,12 +224,16 @@
#define UARTWATER_TXWATER_OFF 0
#define UARTWATER_RXWATER_OFF 16
-#define FSL_UART_RX_DMA_BUFFER_SIZE 64
+/* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */
+#define DMA_RX_TIMEOUT (10)
#define DRIVER_NAME "fsl-lpuart"
#define DEV_NAME "ttyLP"
#define UART_NR 6
+static bool nodma = false;
+module_param(nodma, bool, S_IRUGO);
+
struct lpuart_port {
struct uart_port port;
struct clk *clk;
@@ -243,18 +247,18 @@ struct lpuart_port {
struct dma_chan *dma_rx_chan;
struct dma_async_tx_descriptor *dma_tx_desc;
struct dma_async_tx_descriptor *dma_rx_desc;
- dma_addr_t dma_tx_buf_bus;
- dma_addr_t dma_rx_buf_bus;
dma_cookie_t dma_tx_cookie;
dma_cookie_t dma_rx_cookie;
- unsigned char *dma_tx_buf_virt;
- unsigned char *dma_rx_buf_virt;
unsigned int dma_tx_bytes;
unsigned int dma_rx_bytes;
- int dma_tx_in_progress;
- int dma_rx_in_progress;
+ bool dma_tx_in_progress;
unsigned int dma_rx_timeout;
struct timer_list lpuart_timer;
+ struct scatterlist rx_sgl, tx_sgl[2];
+ struct circ_buf rx_ring;
+ int rx_dma_rng_buf_len;
+ unsigned int dma_tx_nents;
+ wait_queue_head_t dma_wait;
};
static const struct of_device_id lpuart_dt_ids[] = {
@@ -270,7 +274,6 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);
-static void lpuart_dma_rx_complete(void *arg);
static u32 lpuart32_read(void __iomem *addr)
{
@@ -316,141 +319,102 @@ static void lpuart32_stop_rx(struct uart_port *port)
lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL);
}
-static void lpuart_copy_rx_to_tty(struct lpuart_port *sport,
- struct tty_port *tty, int count)
+static void lpuart_dma_tx(struct lpuart_port *sport)
{
- int copied;
-
- sport->port.icount.rx += count;
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ struct scatterlist *sgl = sport->tx_sgl;
+ struct device *dev = sport->port.dev;
+ int ret;
- if (!tty) {
- dev_err(sport->port.dev, "No tty port\n");
+ if (sport->dma_tx_in_progress)
return;
- }
- dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus,
- FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
- copied = tty_insert_flip_string(tty,
- ((unsigned char *)(sport->dma_rx_buf_virt)), count);
+ sport->dma_tx_bytes = uart_circ_chars_pending(xmit);
- if (copied != count) {
- WARN_ON(1);
- dev_err(sport->port.dev, "RxData copy to tty layer failed\n");
+ if (xmit->tail < xmit->head || xmit->head == 0) {
+ sport->dma_tx_nents = 1;
+ sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes);
+ } else {
+ sport->dma_tx_nents = 2;
+ sg_init_table(sgl, 2);
+ sg_set_buf(sgl, xmit->buf + xmit->tail,
+ UART_XMIT_SIZE - xmit->tail);
+ sg_set_buf(sgl + 1, xmit->buf, xmit->head);
}
- dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
- FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
-}
-
-static void lpuart_pio_tx(struct lpuart_port *sport)
-{
- struct circ_buf *xmit = &sport->port.state->xmit;
- unsigned long flags;
-
- spin_lock_irqsave(&sport->port.lock, flags);
-
- while (!uart_circ_empty(xmit) &&
- readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) {
- writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- sport->port.icount.tx++;
+ ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
+ if (!ret) {
+ dev_err(dev, "DMA mapping error for TX.\n");
+ return;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
-
- if (uart_circ_empty(xmit))
- writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
- sport->port.membase + UARTCR5);
-
- spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count)
-{
- struct circ_buf *xmit = &sport->port.state->xmit;
- dma_addr_t tx_bus_addr;
-
- dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
- sport->dma_tx_bytes = count & ~(sport->txfifo_size - 1);
- tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail;
- sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan,
- tx_bus_addr, sport->dma_tx_bytes,
+ sport->dma_tx_desc = dmaengine_prep_slave_sg(sport->dma_tx_chan, sgl,
+ sport->dma_tx_nents,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
-
if (!sport->dma_tx_desc) {
- dev_err(sport->port.dev, "Not able to get desc for tx\n");
- return -EIO;
+ dma_unmap_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
+ dev_err(dev, "Cannot prepare TX slave DMA!\n");
+ return;
}
sport->dma_tx_desc->callback = lpuart_dma_tx_complete;
sport->dma_tx_desc->callback_param = sport;
- sport->dma_tx_in_progress = 1;
+ sport->dma_tx_in_progress = true;
sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
dma_async_issue_pending(sport->dma_tx_chan);
-
- return 0;
-}
-
-static void lpuart_prepare_tx(struct lpuart_port *sport)
-{
- struct circ_buf *xmit = &sport->port.state->xmit;
- unsigned long count = CIRC_CNT_TO_END(xmit->head,
- xmit->tail, UART_XMIT_SIZE);
-
- if (!count)
- return;
-
- if (count < sport->txfifo_size)
- writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS,
- sport->port.membase + UARTCR5);
- else {
- writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
- sport->port.membase + UARTCR5);
- lpuart_dma_tx(sport, count);
- }
}
static void lpuart_dma_tx_complete(void *arg)
{
struct lpuart_port *sport = arg;
+ struct scatterlist *sgl = &sport->tx_sgl[0];
struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long flags;
- async_tx_ack(sport->dma_tx_desc);
-
spin_lock_irqsave(&sport->port.lock, flags);
+ dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
+
xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1);
- sport->dma_tx_in_progress = 0;
+
+ sport->port.icount.tx += sport->dma_tx_bytes;
+ sport->dma_tx_in_progress = false;
+ spin_unlock_irqrestore(&sport->port.lock, flags);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
- lpuart_prepare_tx(sport);
+ if (waitqueue_active(&sport->dma_wait)) {
+ wake_up(&sport->dma_wait);
+ return;
+ }
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
+ lpuart_dma_tx(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
}
-static int lpuart_dma_rx(struct lpuart_port *sport)
+static int lpuart_dma_tx_request(struct uart_port *port)
{
- dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
- FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
- sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan,
- sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE,
- DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_slave_config dma_tx_sconfig = {};
+ int ret;
- if (!sport->dma_rx_desc) {
- dev_err(sport->port.dev, "Not able to get desc for rx\n");
- return -EIO;
- }
+ dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
+ dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_tx_sconfig.dst_maxburst = 1;
+ dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
- sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
- sport->dma_rx_desc->callback_param = sport;
- sport->dma_rx_in_progress = 1;
- sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
- dma_async_issue_pending(sport->dma_rx_chan);
+ if (ret) {
+ dev_err(sport->port.dev,
+ "DMA slave config failed, err = %d\n", ret);
+ return ret;
+ }
return 0;
}
@@ -458,75 +422,76 @@ static int lpuart_dma_rx(struct lpuart_port *sport)
static void lpuart_flush_buffer(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+
if (sport->lpuart_dma_tx_use) {
+ if (sport->dma_tx_in_progress) {
+ dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
+ sport->dma_tx_nents, DMA_TO_DEVICE);
+ sport->dma_tx_in_progress = false;
+ }
dmaengine_terminate_all(sport->dma_tx_chan);
- sport->dma_tx_in_progress = 0;
}
}
-static void lpuart_dma_rx_complete(void *arg)
+#if defined(CONFIG_CONSOLE_POLL)
+
+static int lpuart_poll_init(struct uart_port *port)
{
- struct lpuart_port *sport = arg;
- struct tty_port *port = &sport->port.state->port;
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
unsigned long flags;
+ unsigned char temp;
- async_tx_ack(sport->dma_rx_desc);
- mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
+ sport->port.fifosize = 0;
spin_lock_irqsave(&sport->port.lock, flags);
+ /* Disable Rx & Tx */
+ writeb(0, sport->port.membase + UARTCR2);
- sport->dma_rx_in_progress = 0;
- lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE);
- tty_flip_buffer_push(port);
- lpuart_dma_rx(sport);
-
- spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static void lpuart_timer_func(unsigned long data)
-{
- struct lpuart_port *sport = (struct lpuart_port *)data;
- struct tty_port *port = &sport->port.state->port;
- struct dma_tx_state state;
- unsigned long flags;
- unsigned char temp;
- int count;
+ temp = readb(sport->port.membase + UARTPFIFO);
+ /* Enable Rx and Tx FIFO */
+ writeb(temp | UARTPFIFO_RXFE | UARTPFIFO_TXFE,
+ sport->port.membase + UARTPFIFO);
- del_timer(&sport->lpuart_timer);
- dmaengine_pause(sport->dma_rx_chan);
- dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state);
- dmaengine_terminate_all(sport->dma_rx_chan);
- count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue;
- async_tx_ack(sport->dma_rx_desc);
+ /* flush Tx and Rx FIFO */
+ writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
+ sport->port.membase + UARTCFIFO);
- spin_lock_irqsave(&sport->port.lock, flags);
+ /* explicitly clear RDRF */
+ if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
+ readb(sport->port.membase + UARTDR);
+ writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+ }
- sport->dma_rx_in_progress = 0;
- lpuart_copy_rx_to_tty(sport, port, count);
- tty_flip_buffer_push(port);
- temp = readb(sport->port.membase + UARTCR5);
- writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+ writeb(0, sport->port.membase + UARTTWFIFO);
+ writeb(1, sport->port.membase + UARTRWFIFO);
+ /* Enable Rx and Tx */
+ writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2);
spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ return 0;
}
-static inline void lpuart_prepare_rx(struct lpuart_port *sport)
+static void lpuart_poll_put_char(struct uart_port *port, unsigned char c)
{
- unsigned long flags;
- unsigned char temp;
-
- spin_lock_irqsave(&sport->port.lock, flags);
+ /* drain */
+ while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE))
+ barrier();
- sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
- add_timer(&sport->lpuart_timer);
+ writeb(c, port->membase + UARTDR);
+}
- lpuart_dma_rx(sport);
- temp = readb(sport->port.membase + UARTCR5);
- writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+static int lpuart_poll_get_char(struct uart_port *port)
+{
+ if (!(readb(port->membase + UARTSR1) & UARTSR1_RDRF))
+ return NO_POLL_CHAR;
- spin_unlock_irqrestore(&sport->port.lock, flags);
+ return readb(port->membase + UARTDR);
}
+#endif
+
static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
@@ -580,8 +545,8 @@ static void lpuart_start_tx(struct uart_port *port)
writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
if (sport->lpuart_dma_tx_use) {
- if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress)
- lpuart_prepare_tx(sport);
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port))
+ lpuart_dma_tx(sport);
} else {
if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
lpuart_transmit_buffer(sport);
@@ -600,6 +565,29 @@ static void lpuart32_start_tx(struct uart_port *port)
lpuart32_transmit_buffer(sport);
}
+/* return TIOCSER_TEMT when transmitter is not busy */
+static unsigned int lpuart_tx_empty(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ unsigned char sr1 = readb(port->membase + UARTSR1);
+ unsigned char sfifo = readb(port->membase + UARTSFIFO);
+
+ if (sport->dma_tx_in_progress)
+ return 0;
+
+ if (sr1 & UARTSR1_TC && sfifo & UARTSFIFO_TXEMPT)
+ return TIOCSER_TEMT;
+
+ return 0;
+}
+
+static unsigned int lpuart32_tx_empty(struct uart_port *port)
+{
+ return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
+ TIOCSER_TEMT : 0;
+}
+
static irqreturn_t lpuart_txint(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
@@ -639,11 +627,14 @@ out:
static irqreturn_t lpuart_rxint(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
- unsigned int flg, ignored = 0;
+ unsigned int flg, ignored = 0, overrun = 0;
struct tty_port *port = &sport->port.state->port;
unsigned long flags;
unsigned char rx, sr;
+ if (sport->port.irq_wake)
+ pm_wakeup_event(port->tty->dev, 0);
+
spin_lock_irqsave(&sport->port.lock, flags);
while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
@@ -666,7 +657,7 @@ static irqreturn_t lpuart_rxint(int irq, void *dev_id)
sport->port.icount.frame++;
if (sr & UARTSR1_OR)
- sport->port.icount.overrun++;
+ overrun++;
if (sr & sport->port.ignore_status_mask) {
if (++ignored > 100)
@@ -693,6 +684,17 @@ static irqreturn_t lpuart_rxint(int irq, void *dev_id)
}
out:
+ if (overrun) {
+ sport->port.icount.overrun += overrun;
+
+ /*
+ * Overruns cause FIFO pointers to become missaligned.
+ * Flushing the receive FIFO reinitializes the pointers.
+ */
+ writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO);
+ writeb(UARTSFIFO_RXOF, sport->port.membase + UARTSFIFO);
+ }
+
spin_unlock_irqrestore(&sport->port.lock, flags);
tty_flip_buffer_push(port);
@@ -766,23 +768,15 @@ out:
static irqreturn_t lpuart_int(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
- unsigned char sts, crdma;
+ unsigned char sts;
sts = readb(sport->port.membase + UARTSR1);
- crdma = readb(sport->port.membase + UARTCR5);
- if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) {
- if (sport->lpuart_dma_rx_use)
- lpuart_prepare_rx(sport);
- else
- lpuart_rxint(irq, dev_id);
- }
- if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) {
- if (sport->lpuart_dma_tx_use)
- lpuart_pio_tx(sport);
- else
- lpuart_txint(irq, dev_id);
- }
+ if (sts & UARTSR1_RDRF)
+ lpuart_rxint(irq, dev_id);
+
+ if (sts & UARTSR1_TDRE)
+ lpuart_txint(irq, dev_id);
return IRQ_HANDLED;
}
@@ -807,17 +801,264 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-/* return TIOCSER_TEMT when transmitter is not busy */
-static unsigned int lpuart_tx_empty(struct uart_port *port)
+static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
{
- return (readb(port->membase + UARTSR1) & UARTSR1_TC) ?
- TIOCSER_TEMT : 0;
+ struct tty_port *port = &sport->port.state->port;
+ struct dma_tx_state state;
+ enum dma_status dmastat;
+ struct circ_buf *ring = &sport->rx_ring;
+ unsigned long flags;
+ int count = 0;
+ unsigned char sr;
+
+ sr = readb(sport->port.membase + UARTSR1);
+
+ if (sr & (UARTSR1_PE | UARTSR1_FE)) {
+ unsigned char cr2;
+
+ /* Disable receiver during this operation... */
+ cr2 = readb(sport->port.membase + UARTCR2);
+ cr2 &= ~(UARTCR2_RE);
+ writeb(cr2, sport->port.membase + UARTCR2);
+
+ /* Read DR to clear the error flags */
+ readb(sport->port.membase + UARTDR);
+
+ if (sr & UARTSR1_PE)
+ sport->port.icount.parity++;
+ else if (sr & UARTSR1_FE)
+ sport->port.icount.frame++;
+
+ /*
+ * At this point parity/framing error is cleared
+ * However, since the DMA already read the data register
+ * and we had to read it again after reading the status
+ * register to properly clear the flags, the FIFO actually
+ * underflowed... This requires a clearing of the FIFO...
+ */
+ if (readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXUF) {
+ writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+ writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO);
+ }
+
+ cr2 |= UARTCR2_RE;
+ writeb(cr2, sport->port.membase + UARTCR2);
+ }
+
+ async_tx_ack(sport->dma_rx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ dmastat = dmaengine_tx_status(sport->dma_rx_chan,
+ sport->dma_rx_cookie,
+ &state);
+
+ if (dmastat == DMA_ERROR) {
+ dev_err(sport->port.dev, "Rx DMA transfer failed!\n");
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ return;
+ }
+
+ /* CPU claims ownership of RX DMA buffer */
+ dma_sync_sg_for_cpu(sport->port.dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
+
+ /*
+ * ring->head points to the end of data already written by the DMA.
+ * ring->tail points to the beginning of data to be read by the
+ * framework.
+ * The current transfer size should not be larger than the dma buffer
+ * length.
+ */
+ ring->head = sport->rx_sgl.length - state.residue;
+ BUG_ON(ring->head > sport->rx_sgl.length);
+ /*
+ * At this point ring->head may point to the first byte right after the
+ * last byte of the dma buffer:
+ * 0 <= ring->head <= sport->rx_sgl.length
+ *
+ * However ring->tail must always points inside the dma buffer:
+ * 0 <= ring->tail <= sport->rx_sgl.length - 1
+ *
+ * Since we use a ring buffer, we have to handle the case
+ * where head is lower than tail. In such a case, we first read from
+ * tail to the end of the buffer then reset tail.
+ */
+ if (ring->head < ring->tail) {
+ count = sport->rx_sgl.length - ring->tail;
+
+ tty_insert_flip_string(port, ring->buf + ring->tail, count);
+ ring->tail = 0;
+ sport->port.icount.rx += count;
+ }
+
+ /* Finally we read data from tail to head */
+ if (ring->tail < ring->head) {
+ count = ring->head - ring->tail;
+ tty_insert_flip_string(port, ring->buf + ring->tail, count);
+ /* Wrap ring->head if needed */
+ if (ring->head >= sport->rx_sgl.length)
+ ring->head = 0;
+ ring->tail = ring->head;
+ sport->port.icount.rx += count;
+ }
+
+ dma_sync_sg_for_device(sport->port.dev, &sport->rx_sgl, 1,
+ DMA_FROM_DEVICE);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ tty_flip_buffer_push(port);
+ mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
}
-static unsigned int lpuart32_tx_empty(struct uart_port *port)
+static void lpuart_dma_rx_complete(void *arg)
{
- return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
- TIOCSER_TEMT : 0;
+ struct lpuart_port *sport = arg;
+
+ lpuart_copy_rx_to_tty(sport);
+}
+
+static void lpuart_timer_func(unsigned long data)
+{
+ struct lpuart_port *sport = (struct lpuart_port *)data;
+
+ lpuart_copy_rx_to_tty(sport);
+}
+
+static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
+{
+ struct dma_slave_config dma_rx_sconfig = {};
+ struct circ_buf *ring = &sport->rx_ring;
+ int ret, nent;
+ int bits, baud;
+ struct tty_port *port = &sport->port.state->port;
+ struct tty_struct *tty = port->tty;
+ struct ktermios *termios = &tty->termios;
+
+ baud = tty_get_baud_rate(tty);
+
+ bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10;
+ if (termios->c_cflag & PARENB)
+ bits++;
+
+ /*
+ * Calculate length of one DMA buffer size to keep latency below
+ * 10ms at any baud rate.
+ */
+ sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2;
+ sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1));
+ if (sport->rx_dma_rng_buf_len < 16)
+ sport->rx_dma_rng_buf_len = 16;
+
+ ring->buf = kmalloc(sport->rx_dma_rng_buf_len, GFP_ATOMIC);
+ if (!ring->buf) {
+ dev_err(sport->port.dev, "Ring buf alloc failed\n");
+ return -ENOMEM;
+ }
+
+ sg_init_one(&sport->rx_sgl, ring->buf, sport->rx_dma_rng_buf_len);
+ sg_set_buf(&sport->rx_sgl, ring->buf, sport->rx_dma_rng_buf_len);
+ nent = dma_map_sg(sport->port.dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
+
+ if (!nent) {
+ dev_err(sport->port.dev, "DMA Rx mapping error\n");
+ return -EINVAL;
+ }
+
+ dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
+ dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_rx_sconfig.src_maxburst = 1;
+ dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig);
+
+ if (ret < 0) {
+ dev_err(sport->port.dev,
+ "DMA Rx slave config failed, err = %d\n", ret);
+ return ret;
+ }
+
+ sport->dma_rx_desc = dmaengine_prep_dma_cyclic(sport->dma_rx_chan,
+ sg_dma_address(&sport->rx_sgl),
+ sport->rx_sgl.length,
+ sport->rx_sgl.length / 2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!sport->dma_rx_desc) {
+ dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n");
+ return -EFAULT;
+ }
+
+ sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
+ sport->dma_rx_desc->callback_param = sport;
+ sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
+ dma_async_issue_pending(sport->dma_rx_chan);
+
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
+ sport->port.membase + UARTCR5);
+
+ return 0;
+}
+
+static void lpuart_dma_rx_free(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+
+ if (sport->dma_rx_chan)
+ dmaengine_terminate_all(sport->dma_rx_chan);
+
+ dma_unmap_sg(sport->port.dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
+ kfree(sport->rx_ring.buf);
+ sport->rx_ring.tail = 0;
+ sport->rx_ring.head = 0;
+ sport->dma_rx_desc = NULL;
+ sport->dma_rx_cookie = -EINVAL;
+}
+
+static int lpuart_config_rs485(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+
+ u8 modem = readb(sport->port.membase + UARTMODEM) &
+ ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
+ writeb(modem, sport->port.membase + UARTMODEM);
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ /* Enable auto RS-485 RTS mode */
+ modem |= UARTMODEM_TXRTSE;
+
+ /*
+ * RTS needs to be logic HIGH either during transer _or_ after
+ * transfer, other variants are not supported by the hardware.
+ */
+
+ if (!(rs485->flags & (SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND)))
+ rs485->flags |= SER_RS485_RTS_ON_SEND;
+
+ if (rs485->flags & SER_RS485_RTS_ON_SEND &&
+ rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+
+ /*
+ * The hardware defaults to RTS logic HIGH while transfer.
+ * Switch polarity in case RTS shall be logic HIGH
+ * after transfer.
+ * Note: UART is assumed to be active high.
+ */
+ if (rs485->flags & SER_RS485_RTS_ON_SEND)
+ modem &= ~UARTMODEM_TXRTSPOL;
+ else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ modem |= UARTMODEM_TXRTSPOL;
+ }
+
+ /* Store the new configuration */
+ sport->port.rs485 = *rs485;
+
+ writeb(modem, sport->port.membase + UARTMODEM);
+ return 0;
}
static unsigned int lpuart_get_mctrl(struct uart_port *port)
@@ -853,17 +1094,22 @@ static unsigned int lpuart32_get_mctrl(struct uart_port *port)
static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned char temp;
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
- temp = readb(port->membase + UARTMODEM) &
+ /* Make sure RXRTSE bit is not set when RS485 is enabled */
+ if (!(sport->port.rs485.flags & SER_RS485_ENABLED)) {
+ temp = readb(sport->port.membase + UARTMODEM) &
~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
- if (mctrl & TIOCM_RTS)
- temp |= UARTMODEM_RXRTSE;
+ if (mctrl & TIOCM_RTS)
+ temp |= UARTMODEM_RXRTSE;
- if (mctrl & TIOCM_CTS)
- temp |= UARTMODEM_TXCTSE;
+ if (mctrl & TIOCM_CTS)
+ temp |= UARTMODEM_TXCTSE;
- writeb(temp, port->membase + UARTMODEM);
+ writeb(temp, port->membase + UARTMODEM);
+ }
}
static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -921,13 +1167,16 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
sport->port.membase + UARTPFIFO);
- /* explicitly clear RDRF */
- readb(sport->port.membase + UARTSR1);
-
/* flush Tx and Rx FIFO */
writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
sport->port.membase + UARTCFIFO);
+ /* explicitly clear RDRF */
+ if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
+ readb(sport->port.membase + UARTDR);
+ writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+ }
+
writeb(0, sport->port.membase + UARTTWFIFO);
writeb(1, sport->port.membase + UARTRWFIFO);
@@ -960,116 +1209,17 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport)
lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL);
}
-static int lpuart_dma_tx_request(struct uart_port *port)
+static void rx_dma_timer_init(struct lpuart_port *sport)
{
- struct lpuart_port *sport = container_of(port,
- struct lpuart_port, port);
- struct dma_slave_config dma_tx_sconfig;
- dma_addr_t dma_bus;
- unsigned char *dma_buf;
- int ret;
-
- dma_bus = dma_map_single(sport->dma_tx_chan->device->dev,
- sport->port.state->xmit.buf,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
-
- if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) {
- dev_err(sport->port.dev, "dma_map_single tx failed\n");
- return -ENOMEM;
- }
-
- dma_buf = sport->port.state->xmit.buf;
- dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
- dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- dma_tx_sconfig.dst_maxburst = sport->txfifo_size;
- dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
- ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
-
- if (ret < 0) {
- dev_err(sport->port.dev,
- "Dma slave config failed, err = %d\n", ret);
- return ret;
- }
-
- sport->dma_tx_buf_virt = dma_buf;
- sport->dma_tx_buf_bus = dma_bus;
- sport->dma_tx_in_progress = 0;
-
- return 0;
-}
-
-static int lpuart_dma_rx_request(struct uart_port *port)
-{
- struct lpuart_port *sport = container_of(port,
- struct lpuart_port, port);
- struct dma_slave_config dma_rx_sconfig;
- dma_addr_t dma_bus;
- unsigned char *dma_buf;
- int ret;
-
- dma_buf = devm_kzalloc(sport->port.dev,
- FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL);
-
- if (!dma_buf) {
- dev_err(sport->port.dev, "Dma rx alloc failed\n");
- return -ENOMEM;
- }
-
- dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf,
- FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-
- if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) {
- dev_err(sport->port.dev, "dma_map_single rx failed\n");
- return -ENOMEM;
- }
-
- dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
- dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- dma_rx_sconfig.src_maxburst = 1;
- dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
- ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig);
-
- if (ret < 0) {
- dev_err(sport->port.dev,
- "Dma slave config failed, err = %d\n", ret);
- return ret;
- }
-
- sport->dma_rx_buf_virt = dma_buf;
- sport->dma_rx_buf_bus = dma_bus;
- sport->dma_rx_in_progress = 0;
-
- return 0;
-}
-
-static void lpuart_dma_tx_free(struct uart_port *port)
-{
- struct lpuart_port *sport = container_of(port,
- struct lpuart_port, port);
-
- dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
-
- sport->dma_tx_buf_bus = 0;
- sport->dma_tx_buf_virt = NULL;
-}
-
-static void lpuart_dma_rx_free(struct uart_port *port)
-{
- struct lpuart_port *sport = container_of(port,
- struct lpuart_port, port);
-
- dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus,
- FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-
- sport->dma_rx_buf_bus = 0;
- sport->dma_rx_buf_virt = NULL;
+ setup_timer(&sport->lpuart_timer, lpuart_timer_func,
+ (unsigned long)sport);
+ sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
+ add_timer(&sport->lpuart_timer);
}
static int lpuart_startup(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
- int ret;
unsigned long flags;
unsigned char temp;
@@ -1084,43 +1234,43 @@ static int lpuart_startup(struct uart_port *port)
sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
- if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) {
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ lpuart_setup_watermark(sport);
+
+ temp = readb(sport->port.membase + UARTCR2);
+ temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+ writeb(temp, sport->port.membase + UARTCR2);
+
+ if (sport->dma_rx_chan && !lpuart_start_rx_dma(sport)) {
+ /* set Rx DMA timeout */
+ sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT);
+ if (!sport->dma_rx_timeout)
+ sport->dma_rx_timeout = 1;
+
sport->lpuart_dma_rx_use = true;
- setup_timer(&sport->lpuart_timer, lpuart_timer_func,
- (unsigned long)sport);
- } else
+ rx_dma_timer_init(sport);
+ } else {
sport->lpuart_dma_rx_use = false;
-
+ }
if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) {
+ init_waitqueue_head(&sport->dma_wait);
sport->lpuart_dma_tx_use = true;
temp = readb(port->membase + UARTCR5);
- temp &= ~UARTCR5_RDMAS;
writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5);
- } else
+ } else {
sport->lpuart_dma_tx_use = false;
-
- ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
- DRIVER_NAME, sport);
- if (ret)
- return ret;
-
- spin_lock_irqsave(&sport->port.lock, flags);
-
- lpuart_setup_watermark(sport);
-
- temp = readb(sport->port.membase + UARTCR2);
- temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
- writeb(temp, sport->port.membase + UARTCR2);
+ }
spin_unlock_irqrestore(&sport->port.lock, flags);
+
return 0;
}
static int lpuart32_startup(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
- int ret;
unsigned long flags;
unsigned long temp;
@@ -1133,11 +1283,6 @@ static int lpuart32_startup(struct uart_port *port)
sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK) - 1);
- ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0,
- DRIVER_NAME, sport);
- if (ret)
- return ret;
-
spin_lock_irqsave(&sport->port.lock, flags);
lpuart32_setup_watermark(sport);
@@ -1167,20 +1312,24 @@ static void lpuart_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
- devm_free_irq(port->dev, port->irq, sport);
-
if (sport->lpuart_dma_rx_use) {
- lpuart_dma_rx_free(&sport->port);
del_timer_sync(&sport->lpuart_timer);
+ lpuart_dma_rx_free(&sport->port);
}
- if (sport->lpuart_dma_tx_use)
- lpuart_dma_tx_free(&sport->port);
+ if (sport->lpuart_dma_tx_use) {
+ if (wait_event_interruptible(sport->dma_wait,
+ !sport->dma_tx_in_progress) != false) {
+ sport->dma_tx_in_progress = false;
+ dmaengine_terminate_all(sport->dma_tx_chan);
+ }
+
+ lpuart_stop_tx(port);
+ }
}
static void lpuart32_shutdown(struct uart_port *port)
{
- struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
unsigned long temp;
unsigned long flags;
@@ -1193,8 +1342,6 @@ static void lpuart32_shutdown(struct uart_port *port)
lpuart32_write(temp, port->membase + UARTCTRL);
spin_unlock_irqrestore(&port->lock, flags);
-
- devm_free_irq(port->dev, port->irq, sport);
}
static void
@@ -1203,13 +1350,14 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
unsigned long flags;
- unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem;
+ unsigned char cr1, old_cr1, old_cr2, cr3, cr4, bdh, modem;
unsigned int baud;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
unsigned int sbr, brfa;
cr1 = old_cr1 = readb(sport->port.membase + UARTCR1);
old_cr2 = readb(sport->port.membase + UARTCR2);
+ cr3 = readb(sport->port.membase + UARTCR3);
cr4 = readb(sport->port.membase + UARTCR4);
bdh = readb(sport->port.membase + UARTBDH);
modem = readb(sport->port.membase + UARTMODEM);
@@ -1240,6 +1388,13 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
cr1 |= UARTCR1_M;
}
+ /*
+ * When auto RS-485 RTS mode is enabled,
+ * hardware flow control need to be disabled.
+ */
+ if (sport->port.rs485.flags & SER_RS485_ENABLED)
+ termios->c_cflag &= ~CRTSCTS;
+
if (termios->c_cflag & CRTSCTS) {
modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
} else {
@@ -1257,7 +1412,10 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & PARENB)) {
if (termios->c_cflag & CMSPAR) {
cr1 &= ~UARTCR1_PE;
- cr1 |= UARTCR1_M;
+ if (termios->c_cflag & PARODD)
+ cr3 |= UARTCR3_T8;
+ else
+ cr3 &= ~UARTCR3_T8;
} else {
cr1 |= UARTCR1_PE;
if ((termios->c_cflag & CSIZE) == CS8)
@@ -1274,6 +1432,18 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
/* ask the core to calculate the divisor */
baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ /*
+ * Need to update the Ring buffer length according to the selected
+ * baud rate and restart Rx DMA path.
+ *
+ * Since timer function acqures sport->port.lock, need to stop before
+ * acquring same lock because otherwise del_timer_sync() can deadlock.
+ */
+ if (old && sport->lpuart_dma_rx_use) {
+ del_timer_sync(&sport->lpuart_timer);
+ lpuart_dma_rx_free(&sport->port);
+ }
+
spin_lock_irqsave(&sport->port.lock, flags);
sport->port.read_status_mask = 0;
@@ -1299,17 +1469,6 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
- if (sport->lpuart_dma_rx_use) {
- /* Calculate delay for 1.5 DMA buffers */
- sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
- FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
- sport->rxfifo_size / 2;
- dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
- sport->dma_rx_timeout * 1000 / HZ, sport->port.timeout);
- if (sport->dma_rx_timeout < msecs_to_jiffies(20))
- sport->dma_rx_timeout = msecs_to_jiffies(20);
- }
-
/* wait transmit engin complete */
while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC))
barrier();
@@ -1327,12 +1486,20 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
writeb(cr4 | brfa, sport->port.membase + UARTCR4);
writeb(bdh, sport->port.membase + UARTBDH);
writeb(sbr & 0xFF, sport->port.membase + UARTBDL);
+ writeb(cr3, sport->port.membase + UARTCR3);
writeb(cr1, sport->port.membase + UARTCR1);
writeb(modem, sport->port.membase + UARTMODEM);
/* restore control register */
writeb(old_cr2, sport->port.membase + UARTCR2);
+ if (old && sport->lpuart_dma_rx_use) {
+ if (!lpuart_start_rx_dma(sport))
+ rx_dma_timer_init(sport);
+ else
+ sport->lpuart_dma_rx_use = false;
+ }
+
spin_unlock_irqrestore(&sport->port.lock, flags);
}
@@ -1498,7 +1665,7 @@ static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser)
return ret;
}
-static struct uart_ops lpuart_pops = {
+static const struct uart_ops lpuart_pops = {
.tx_empty = lpuart_tx_empty,
.set_mctrl = lpuart_set_mctrl,
.get_mctrl = lpuart_get_mctrl,
@@ -1515,9 +1682,14 @@ static struct uart_ops lpuart_pops = {
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
.flush_buffer = lpuart_flush_buffer,
+#if defined(CONFIG_CONSOLE_POLL)
+ .poll_init = lpuart_poll_init,
+ .poll_get_char = lpuart_poll_get_char,
+ .poll_put_char = lpuart_poll_put_char,
+#endif
};
-static struct uart_ops lpuart32_pops = {
+static const struct uart_ops lpuart32_pops = {
.tx_empty = lpuart32_tx_empty,
.set_mctrl = lpuart32_set_mctrl,
.get_mctrl = lpuart32_get_mctrl,
@@ -1560,6 +1732,13 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned char old_cr2, cr2;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
@@ -1574,6 +1753,9 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
barrier();
writeb(old_cr2, sport->port.membase + UARTCR2);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
@@ -1581,6 +1763,13 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned long old_cr, cr;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
@@ -1595,6 +1784,9 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
barrier();
lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
@@ -1804,6 +1996,18 @@ static struct uart_driver lpuart_reg = {
.cons = LPUART_CONSOLE,
};
+static struct dma_chan *lpuart_request_dma_chan(struct lpuart_port *sport,
+ const char *name)
+{
+ struct dma_chan *chan;
+
+ chan = dma_request_slave_channel(sport->port.dev, name);
+ if (!chan)
+ dev_info(sport->port.dev, "DMA %s channel request failed, "
+ "operating without %s DMA\n", name, name);
+ return chan;
+}
+
static int lpuart_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -1838,13 +2042,21 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
sport->port.iotype = UPIO_MEM;
- sport->port.irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot obtain irq\n");
+ return ret;
+ }
+ sport->port.irq = ret;
+
if (sport->lpuart32)
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
sport->port.flags = UPF_BOOT_AUTOCONF;
+ sport->port.rs485_config = lpuart_config_rs485;
+
sport->clk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(sport->clk)) {
ret = PTR_ERR(sport->clk);
@@ -1864,28 +2076,40 @@ static int lpuart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &sport->port);
- if (sport->lpuart32)
+ if (sport->lpuart32) {
lpuart_reg.cons = LPUART32_CONSOLE;
- else
+ ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart32_int, 0,
+ DRIVER_NAME, sport);
+ } else {
lpuart_reg.cons = LPUART_CONSOLE;
+ ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart_int, 0,
+ DRIVER_NAME, sport);
+ }
+
+ if (ret)
+ goto failed_irq_request;
ret = uart_add_one_port(&lpuart_reg, &sport->port);
- if (ret) {
- clk_disable_unprepare(sport->clk);
- return ret;
- }
+ if (ret)
+ goto failed_attach_port;
- sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
- if (!sport->dma_tx_chan)
- dev_info(sport->port.dev, "DMA tx channel request failed, "
- "operating without tx DMA\n");
+ if (!nodma) {
+ sport->dma_tx_chan = lpuart_request_dma_chan(sport, "tx");
+ sport->dma_rx_chan = lpuart_request_dma_chan(sport, "rx");
+ }
- sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx");
- if (!sport->dma_rx_chan)
- dev_info(sport->port.dev, "DMA rx channel request failed, "
- "operating without rx DMA\n");
+ if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) {
+ sport->port.rs485.flags |= SER_RS485_ENABLED;
+ sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
+ writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
+ }
return 0;
+
+failed_attach_port:
+failed_irq_request:
+ clk_disable_unprepare(sport->clk);
+ return ret;
}
static int lpuart_remove(struct platform_device *pdev)
@@ -1925,6 +2149,32 @@ static int lpuart_suspend(struct device *dev)
uart_suspend_port(&lpuart_reg, &sport->port);
+ if (sport->lpuart_dma_rx_use) {
+ /*
+ * EDMA driver during suspend will forcefully release any
+ * non-idle DMA channels. If port wakeup is enabled or if port
+ * is console port or 'no_console_suspend' is set the Rx DMA
+ * cannot resume as as expected, hence gracefully release the
+ * Rx DMA path before suspend and start Rx DMA path on resume.
+ */
+ if (sport->port.irq_wake) {
+ del_timer_sync(&sport->lpuart_timer);
+ lpuart_dma_rx_free(&sport->port);
+ }
+
+ /* Disable Rx DMA to use UART port as wakeup source */
+ writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_RDMAS,
+ sport->port.membase + UARTCR5);
+ }
+
+ if (sport->lpuart_dma_tx_use) {
+ sport->dma_tx_in_progress = false;
+ dmaengine_terminate_all(sport->dma_tx_chan);
+ }
+
+ if (sport->port.suspended && !sport->port.irq_wake)
+ clk_disable_unprepare(sport->clk);
+
return 0;
}
@@ -1933,6 +2183,9 @@ static int lpuart_resume(struct device *dev)
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
+ if (sport->port.suspended && !sport->port.irq_wake)
+ clk_prepare_enable(sport->clk);
+
if (sport->lpuart32) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(sport->port.membase + UARTCTRL);
@@ -1946,6 +2199,24 @@ static int lpuart_resume(struct device *dev)
writeb(temp, sport->port.membase + UARTCR2);
}
+ if (sport->lpuart_dma_rx_use) {
+ if (sport->port.irq_wake) {
+ if (!lpuart_start_rx_dma(sport))
+ rx_dma_timer_init(sport);
+ else
+ sport->lpuart_dma_rx_use = false;
+ }
+ }
+
+ if (sport->dma_tx_chan && !lpuart_dma_tx_request(&sport->port)) {
+ init_waitqueue_head(&sport->dma_wait);
+ sport->lpuart_dma_tx_use = true;
+ writeb(readb(sport->port.membase + UARTCR5) |
+ UARTCR5_TDMAS, sport->port.membase + UARTCR5);
+ } else {
+ sport->lpuart_dma_tx_use = false;
+ }
+
uart_resume_port(&lpuart_reg, &sport->port);
return 0;
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 858c30814497..7957fb04e283 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -169,6 +169,7 @@ struct hw_bank {
* @enabled_otg_timer_bits: bits of enabled otg timers
* @next_otg_timer: next nearest enabled timer to be expired
* @work: work for role changing
+ * @work_dr: work for role changing for non-OTG controllers
* @wq: workqueue thread
* @qh_pool: allocation pool for queue heads
* @td_pool: allocation pool for transfer descriptors
@@ -215,6 +216,7 @@ struct ci_hdrc {
unsigned enabled_otg_timer_bits;
enum otg_fsm_timer next_otg_timer;
struct work_struct work;
+ struct work_struct work_dr;
struct workqueue_struct *wq;
struct dma_pool *qh_pool;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 2949289bb3c5..dcd9820aa4fb 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -65,6 +65,10 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
};
+static const struct ci_hdrc_imx_platform_flag vf610_usb_data = {
+ .flags = CI_HDRC_DUAL_ROLE_NOT_OTG,
+};
+
static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
@@ -73,6 +77,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
+ { .compatible = "fsl,vf610-usb", .data = &vf610_usb_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
@@ -301,9 +306,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
&pdata);
if (IS_ERR(data->ci_pdev)) {
ret = PTR_ERR(data->ci_pdev);
- dev_err(&pdev->dev,
- "Can't register ci_hdrc platform device, err=%d\n",
- ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "ci_hdrc_add_device failed, err=%d\n", ret);
goto err_clk;
}
@@ -344,6 +349,11 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
return 0;
}
+static void ci_hdrc_imx_shutdown(struct platform_device *pdev)
+{
+ ci_hdrc_imx_remove(pdev);
+}
+
#ifdef CONFIG_PM
static int imx_controller_suspend(struct device *dev)
{
@@ -461,6 +471,7 @@ static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
static struct platform_driver ci_hdrc_imx_driver = {
.probe = ci_hdrc_imx_probe,
.remove = ci_hdrc_imx_remove,
+ .shutdown = ci_hdrc_imx_shutdown,
.driver = {
.name = "imx_usb",
.of_match_table = ci_hdrc_imx_dt_ids,
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index e104c99b3a1f..0d3f383827f9 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -571,37 +571,71 @@ static irqreturn_t ci_irq(int irq, void *data)
return ret;
}
-static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
- void *ptr)
+static void usb_roleswitch_workqueue(struct work_struct *work)
{
- struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
- struct ci_hdrc *ci = vbus->ci;
+ struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work_dr);
+ struct ci_hdrc_cable *id, *vbus;
+ int ret;
- if (event)
- vbus->state = true;
- else
- vbus->state = false;
+ pm_runtime_get_sync(ci->dev);
- vbus->changed = true;
+ id = &ci->platdata->id_extcon;
+ if (!IS_ERR(id->edev)) {
+ int new_role;
- ci_irq(ci->irq, ci);
- return NOTIFY_DONE;
+ ci_role_stop(ci);
+ hw_wait_phy_stable();
+
+ ret = extcon_get_cable_state_(id->edev, EXTCON_USB_HOST);
+ if (ret) {
+ new_role = CI_ROLE_HOST;
+ dev_info(ci->dev, "switching to host role\n");
+ } else {
+ new_role = CI_ROLE_GADGET;
+ dev_info(ci->dev, "switching to gadget role\n");
+ }
+ ci_role_start(ci, new_role);
+ }
+
+ vbus = &ci->platdata->vbus_extcon;
+ if (!IS_ERR(vbus->edev)) {
+ ret = extcon_get_cable_state_(vbus->edev, EXTCON_USB);
+ if (ret) {
+ usb_gadget_vbus_connect(&ci->gadget);
+ } else {
+ usb_gadget_vbus_disconnect(&ci->gadget);
+ }
+ }
+
+ pm_runtime_put_sync(ci->dev);
+
+ enable_irq(ci->irq);
}
-static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
- void *ptr)
+static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
{
- struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
- struct ci_hdrc *ci = id->ci;
-
- if (event)
- id->state = false;
- else
- id->state = true;
+ struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
+ struct ci_hdrc *ci = cbl->ci;
+
+ if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) {
+ disable_irq_nosync(ci->irq);
+
+ /*
+ * This notifier might get called twice in succession,
+ * once for the ID pin and once for the VBUS pin. Make
+ * sure we only disable irq in case we successfully add
+ * work to the work queue.
+ */
+ if (!queue_work(system_power_efficient_wq, &ci->work_dr))
+ enable_irq(ci->irq);
+ } else {
+ cbl->connected = event;
+ cbl->changed = true;
- id->changed = true;
+ ci_irq(ci->irq, ci);
+ }
- ci_irq(ci->irq, ci);
return NOTIFY_DONE;
}
@@ -718,27 +752,27 @@ static int ci_get_platdata(struct device *dev,
}
cable = &platdata->vbus_extcon;
- cable->nb.notifier_call = ci_vbus_notifier;
+ cable->nb.notifier_call = ci_cable_notifier;
cable->edev = ext_vbus;
if (!IS_ERR(ext_vbus)) {
ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
if (ret)
- cable->state = true;
+ cable->connected = true;
else
- cable->state = false;
+ cable->connected = false;
}
cable = &platdata->id_extcon;
- cable->nb.notifier_call = ci_id_notifier;
+ cable->nb.notifier_call = ci_cable_notifier;
cable->edev = ext_id;
if (!IS_ERR(ext_id)) {
ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
if (ret)
- cable->state = false;
+ cable->connected = true;
else
- cable->state = true;
+ cable->connected = false;
}
return 0;
}
@@ -954,7 +988,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ci_get_otg_capable(ci);
+ if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
+ INIT_WORK(&ci->work_dr, usb_roleswitch_workqueue);
+
+ ret = ci_extcon_register(ci);
+ if (ret)
+ goto stop;
+
dr_mode = ci->platdata->dr_mode;
+
/* initialize role(s) before the interrupt is requested */
if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
ret = ci_hdrc_host_init(ci);
@@ -1001,7 +1043,13 @@ static int ci_hdrc_probe(struct platform_device *pdev)
* role switch, the defalt role is gadget, and the
* user can switch it through debugfs.
*/
- ci->role = CI_ROLE_GADGET;
+ struct ci_hdrc_cable *id = &ci->platdata->id_extcon;
+ if (!IS_ERR(id->edev)) {
+ if (extcon_get_cable_state_(id->edev, EXTCON_USB_HOST))
+ ci->role = CI_ROLE_HOST;
+ else
+ ci->role = CI_ROLE_GADGET;
+ }
}
} else {
ci->role = ci->roles[CI_ROLE_HOST]
@@ -1010,9 +1058,20 @@ static int ci_hdrc_probe(struct platform_device *pdev)
}
if (!ci_otg_is_fsm_mode(ci)) {
+
/* only update vbus status for peripheral */
- if (ci->role == CI_ROLE_GADGET)
- ci_handle_vbus_change(ci);
+ if (dr_mode == USB_DR_MODE_PERIPHERAL) {
+ usb_gadget_vbus_connect(&ci->gadget);
+ } else if (ci->role == CI_ROLE_GADGET) {
+ struct ci_hdrc_cable *vbus = &ci->platdata->vbus_extcon;
+
+ /* Use vbus state from extcon if provided */
+ if (!IS_ERR(vbus->edev) &&
+ extcon_get_cable_state_(vbus->edev, EXTCON_USB))
+ usb_gadget_vbus_connect(&ci->gadget);
+ else
+ ci_handle_vbus_change(ci);
+ }
ret = ci_role_start(ci, ci->role);
if (ret) {
@@ -1028,10 +1087,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (ret)
goto stop;
- ret = ci_extcon_register(ci);
- if (ret)
- goto stop;
-
if (ci->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index b8650210be0f..8bf4032226ed 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -44,7 +44,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
else
val &= ~OTGSC_BSVIS;
- if (cable->state)
+ if (cable->connected)
val |= OTGSC_BSV;
else
val &= ~OTGSC_BSV;
@@ -62,10 +62,10 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
else
val &= ~OTGSC_IDIS;
- if (cable->state)
- val |= OTGSC_ID;
+ if (cable->connected)
+ val &= ~OTGSC_ID; /* host */
else
- val &= ~OTGSC_ID;
+ val |= OTGSC_ID; /* device */
if (cable->enabled)
val |= OTGSC_IDIE;
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 5052c11a2520..8c7a8dc0c31d 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -744,7 +744,7 @@ static inline struct gadget_info *os_desc_item_to_gadget_info(
static ssize_t os_desc_use_show(struct config_item *item, char *page)
{
- return sprintf(page, "%d",
+ return sprintf(page, "%d\n",
os_desc_item_to_gadget_info(item)->use_os_desc);
}
@@ -768,7 +768,7 @@ static ssize_t os_desc_use_store(struct config_item *item, const char *page,
static ssize_t os_desc_b_vendor_code_show(struct config_item *item, char *page)
{
- return sprintf(page, "%d",
+ return sprintf(page, "0x%02x\n",
os_desc_item_to_gadget_info(item)->b_vendor_code);
}
@@ -793,9 +793,13 @@ static ssize_t os_desc_b_vendor_code_store(struct config_item *item,
static ssize_t os_desc_qw_sign_show(struct config_item *item, char *page)
{
struct gadget_info *gi = os_desc_item_to_gadget_info(item);
+ int res;
+
+ res = utf16s_to_utf8s((wchar_t *) gi->qw_sign, OS_STRING_QW_SIGN_LEN,
+ UTF16_LITTLE_ENDIAN, page, PAGE_SIZE - 1);
+ page[res++] = '\n';
- memcpy(page, gi->qw_sign, OS_STRING_QW_SIGN_LEN);
- return OS_STRING_QW_SIGN_LEN;
+ return res;
}
static ssize_t os_desc_qw_sign_store(struct config_item *item, const char *page,
@@ -907,7 +911,7 @@ static inline struct usb_os_desc_ext_prop
static ssize_t ext_prop_type_show(struct config_item *item, char *page)
{
- return sprintf(page, "%d", to_usb_os_desc_ext_prop(item)->type);
+ return sprintf(page, "%d\n", to_usb_os_desc_ext_prop(item)->type);
}
static ssize_t ext_prop_type_store(struct config_item *item,
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 0037104d66ac..d2ca63c03524 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224
depends on M32R
default y
+config LOGO_CUSTOM_CLUT224
+ bool "Custom 224-color Linux logo"
+ default n
+
endif # LOGO
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 3b437813584c..45d4b5346d07 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o
obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o
+obj-$(CONFIG_LOGO_CUSTOM_CLUT224) += logo_custom_clut224.o
+
# How to generate logo's
# Use logo-cfiles to retrieve list of .c files to be built
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 10fbfd8ab963..bef02e84a076 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -111,6 +111,10 @@ const struct linux_logo * __init_refok fb_find_logo(int depth)
/* M32R Linux logo */
logo = &logo_m32r_clut224;
#endif
+#ifdef CONFIG_LOGO_CUSTOM_CLUT224
+ /* Custom Linux logo */
+ logo = &logo_custom_clut224;
+#endif
}
return logo;
}
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index f5b87a8f75c4..b59b0ccb61e9 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -360,7 +360,7 @@ init_cifs_idmap(void)
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
(KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ,
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ KEY_ALLOC_NOT_IN_QUOTA, NULL, NULL);
if (IS_ERR(keyring)) {
ret = PTR_ERR(keyring);
goto failed_put_cred;
diff --git a/fs/nfs/nfs4idmap.c b/fs/nfs/nfs4idmap.c
index c99a887100db..3d4602d66068 100644
--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -201,7 +201,7 @@ int nfs_idmap_init(void)
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
(KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ,
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ KEY_ALLOC_NOT_IN_QUOTA, NULL, NULL);
if (IS_ERR(keyring)) {
ret = PTR_ERR(keyring);
goto failed_put_cred;
diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig
index 7ff7712f284e..87ec3c28e61f 100644
--- a/fs/ubifs/Kconfig
+++ b/fs/ubifs/Kconfig
@@ -50,3 +50,27 @@ config UBIFS_ATIME_SUPPORT
strictatime is the "heavy", relatime is "lighter", etc.
If unsure, say 'N'
+
+config UBIFS_FS_XATTR
+ bool "UBIFS XATTR support"
+ depends on UBIFS_FS
+ default y
+ help
+ Saying Y here includes support for extended attributes (xattrs).
+ Xattrs are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page).
+
+ If unsure, say Y.
+
+config UBIFS_FS_SECURITY
+ bool "UBIFS Security Labels"
+ depends on UBIFS_FS && UBIFS_FS_XATTR
+ default y
+ help
+ Security labels provide an access control facility to support Linux
+ Security Models (LSMs) accepted by AppArmor, SELinux, Smack and TOMOYO
+ Linux. This option enables an extended attribute handler for file
+ security labels in the ubifs filesystem, so that it requires enabling
+ the extended attribute support in advance.
+
+ If you are not using a security module, say N.
diff --git a/fs/ubifs/Makefile b/fs/ubifs/Makefile
index 2c6f0cb816b4..29b5c0d6488c 100644
--- a/fs/ubifs/Makefile
+++ b/fs/ubifs/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_UBIFS_FS) += ubifs.o
ubifs-y += shrinker.o journal.o file.o dir.o super.o sb.o io.o
ubifs-y += tnc.o master.o scan.o replay.o log.o commit.o gc.o orphan.o
ubifs-y += budget.o find.o tnc_commit.o compress.o lpt.o lprops.o
-ubifs-y += recovery.o ioctl.o lpt_commit.o tnc_misc.o xattr.o debug.o
+ubifs-y += recovery.o ioctl.o lpt_commit.o tnc_misc.o debug.o
+ubifs-$(CONFIG_UBIFS_FS_XATTR) += xattr.o
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index f5d5ee43ae6e..a52871ee4d16 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -578,6 +578,11 @@ static int ubifs_unlink(struct inode *dir, struct dentry *dentry)
dbg_gen("dent '%pd' from ino %lu (nlink %d) in dir ino %lu",
dentry, inode->i_ino,
inode->i_nlink, dir->i_ino);
+
+ err = ubifs_purge_xattrs(inode);
+ if (err)
+ return err;
+
ubifs_assert(mutex_is_locked(&dir->i_mutex));
ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = dbg_check_synced_i_size(c, inode);
@@ -673,6 +678,10 @@ static int ubifs_rmdir(struct inode *dir, struct dentry *dentry)
if (err)
return err;
+ err = ubifs_purge_xattrs(inode);
+ if (err)
+ return err;
+
err = ubifs_budget_space(c, &req);
if (err) {
if (err != -ENOSPC)
@@ -1004,9 +1013,13 @@ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
new_dentry, new_dir->i_ino);
ubifs_assert(mutex_is_locked(&old_dir->i_mutex));
ubifs_assert(mutex_is_locked(&new_dir->i_mutex));
- if (unlink)
+ if (unlink) {
ubifs_assert(mutex_is_locked(&new_inode->i_mutex));
+ err = ubifs_purge_xattrs(new_inode);
+ if (err)
+ return err;
+ }
if (unlink && is_dir) {
err = check_dir_empty(c, new_inode);
@@ -1188,10 +1201,12 @@ const struct inode_operations ubifs_dir_inode_operations = {
.rename = ubifs_rename,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
+#ifdef CONFIG_UBIFS_FS_XATTR
.setxattr = ubifs_setxattr,
.getxattr = ubifs_getxattr,
.listxattr = ubifs_listxattr,
.removexattr = ubifs_removexattr,
+#endif
#ifdef CONFIG_UBIFS_ATIME_SUPPORT
.update_time = ubifs_update_time,
#endif
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index e6d0a7df341d..e385d62fbc65 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1622,10 +1622,12 @@ const struct address_space_operations ubifs_file_address_operations = {
const struct inode_operations ubifs_file_inode_operations = {
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
+#ifdef CONFIG_UBIFS_FS_XATTR
.setxattr = ubifs_setxattr,
.getxattr = ubifs_getxattr,
.listxattr = ubifs_listxattr,
.removexattr = ubifs_removexattr,
+#endif
#ifdef CONFIG_UBIFS_ATIME_SUPPORT
.update_time = ubifs_update_time,
#endif
@@ -1636,10 +1638,12 @@ const struct inode_operations ubifs_symlink_inode_operations = {
.follow_link = simple_follow_link,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
+#ifdef CONFIG_UBIFS_FS_XATTR
.setxattr = ubifs_setxattr,
.getxattr = ubifs_getxattr,
.listxattr = ubifs_listxattr,
.removexattr = ubifs_removexattr,
+#endif
#ifdef CONFIG_UBIFS_ATIME_SUPPORT
.update_time = ubifs_update_time,
#endif
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 539fa934ed93..3f04fb2d7995 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -789,9 +789,11 @@ out_free:
int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
{
int err, lnum, offs;
- struct ubifs_ino_node *ino;
+ struct ubifs_ino_node *ino, *ino_start;
struct ubifs_inode *ui = ubifs_inode(inode);
- int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
+ int sync = 0, write_len = 0, ilen = UBIFS_INO_NODE_SZ;
+ int last_reference = !inode->i_nlink;
+ int kill_xattrs = ui->xattr_cnt && last_reference;
dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
@@ -800,20 +802,72 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
* need to synchronize the write-buffer either.
*/
if (!last_reference) {
- len += ui->data_len;
+ ilen += ui->data_len;
sync = IS_SYNC(inode);
+ } else if (kill_xattrs) {
+ write_len += UBIFS_INO_NODE_SZ * ui->xattr_cnt;
}
- ino = kmalloc(len, GFP_NOFS);
+
+ write_len += ilen;
+
+ ino_start = ino = kmalloc(write_len, GFP_NOFS);
if (!ino)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
- err = make_reservation(c, BASEHD, len);
+ err = make_reservation(c, BASEHD, ilen);
if (err)
goto out_free;
+ if (kill_xattrs) {
+ union ubifs_key key;
+ struct qstr nm = { 0 };
+ struct inode *xino;
+ struct ubifs_dent_node *xent, *pxent = NULL;
+
+ if (ui->xattr_cnt >= ubifs_xattr_max_cnt(c)) {
+ ubifs_err(c, "Cannot delete inode, it has too much xattrs!");
+ goto out_release;
+ }
+
+ lowest_xent_key(c, &key, inode->i_ino);
+ while (1) {
+ xent = ubifs_tnc_next_ent(c, &key, &nm);
+ if (IS_ERR(xent)) {
+ err = PTR_ERR(xent);
+ if (err == -ENOENT)
+ break;
+
+ goto out_release;
+ }
+
+ nm.name = xent->name;
+ nm.len = le16_to_cpu(xent->nlen);
+
+ xino = ubifs_iget(c->vfs_sb, xent->inum);
+ if (IS_ERR(xino)) {
+ err = PTR_ERR(xino);
+ ubifs_err(c, "dead directory entry '%s', error %d",
+ xent->name, err);
+ ubifs_ro_mode(c, err);
+ goto out_release;
+ }
+ ubifs_assert(ubifs_inode(xino)->xattr);
+
+ clear_nlink(xino);
+ pack_inode(c, ino, xino, 0);
+ ino = (void *)ino + UBIFS_INO_NODE_SZ;
+ iput(xino);
+
+ kfree(pxent);
+ pxent = xent;
+ key_read(c, &xent->key, &key);
+ }
+ kfree(pxent);
+ }
+
pack_inode(c, ino, inode, 1);
- err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
+ err = write_head(c, BASEHD, ino_start, write_len, &lnum, &offs, sync);
if (err)
goto out_release;
if (!sync)
@@ -826,12 +880,12 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
if (err)
goto out_ro;
ubifs_delete_orphan(c, inode->i_ino);
- err = ubifs_add_dirt(c, lnum, len);
+ err = ubifs_add_dirt(c, lnum, write_len);
} else {
union ubifs_key key;
ino_key_init(c, &key, inode->i_ino);
- err = ubifs_tnc_add(c, &key, lnum, offs, len);
+ err = ubifs_tnc_add(c, &key, lnum, offs, ilen);
}
if (err)
goto out_ro;
@@ -840,7 +894,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
spin_lock(&ui->ui_lock);
ui->synced_i_size = ui->ui_size;
spin_unlock(&ui->ui_lock);
- kfree(ino);
+ kfree(ino_start);
return 0;
out_release:
@@ -849,7 +903,7 @@ out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
out_free:
- kfree(ino);
+ kfree(ino_start);
return err;
}
@@ -889,8 +943,8 @@ int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
ubifs_assert(inode->i_nlink == 0);
- if (ui->del_cmtno != c->cmt_no)
- /* A commit happened for sure */
+ if (ui->xattr_cnt || ui->del_cmtno != c->cmt_no)
+ /* A commit happened for sure or inode hosts xattrs */
return ubifs_jnl_write_inode(c, inode);
down_read(&c->commit_sem);
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 8ece6ca58c0b..2a39e3c2766f 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -295,4 +295,12 @@ static inline int ubifs_next_log_lnum(const struct ubifs_info *c, int lnum)
return lnum;
}
+static inline int ubifs_xattr_max_cnt(struct ubifs_info *c)
+{
+ int max_xattrs = (c->leb_size / 2) / UBIFS_INO_NODE_SZ;
+
+ ubifs_assert(max_xattrs < c->max_orphans);
+ return max_xattrs;
+}
+
#endif /* __UBIFS_MISC_H__ */
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index caf2d123e9ee..8b3543e8baf5 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -54,30 +54,24 @@
static int dbg_check_orphans(struct ubifs_info *c);
-/**
- * ubifs_add_orphan - add an orphan.
- * @c: UBIFS file-system description object
- * @inum: orphan inode number
- *
- * Add an orphan. This function is called when an inodes link count drops to
- * zero.
- */
-int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
+static struct ubifs_orphan *orphan_add(struct ubifs_info *c, ino_t inum,
+ struct ubifs_orphan *parent_orphan)
{
struct ubifs_orphan *orphan, *o;
struct rb_node **p, *parent = NULL;
orphan = kzalloc(sizeof(struct ubifs_orphan), GFP_NOFS);
if (!orphan)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
orphan->inum = inum;
orphan->new = 1;
+ INIT_LIST_HEAD(&orphan->child_list);
spin_lock(&c->orphan_lock);
if (c->tot_orphans >= c->max_orphans) {
spin_unlock(&c->orphan_lock);
kfree(orphan);
- return -ENFILE;
+ return ERR_PTR(-ENFILE);
}
p = &c->orph_tree.rb_node;
while (*p) {
@@ -91,7 +85,7 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
ubifs_err(c, "orphaned twice");
spin_unlock(&c->orphan_lock);
kfree(orphan);
- return 0;
+ return ERR_PTR(-EINVAL);
}
}
c->tot_orphans += 1;
@@ -100,24 +94,22 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
rb_insert_color(&orphan->rb, &c->orph_tree);
list_add_tail(&orphan->list, &c->orph_list);
list_add_tail(&orphan->new_list, &c->orph_new);
+
+ if (parent_orphan) {
+ list_add_tail(&orphan->child_list,
+ &parent_orphan->child_list);
+ }
+
spin_unlock(&c->orphan_lock);
dbg_gen("ino %lu", (unsigned long)inum);
- return 0;
+ return orphan;
}
-/**
- * ubifs_delete_orphan - delete an orphan.
- * @c: UBIFS file-system description object
- * @inum: orphan inode number
- *
- * Delete an orphan. This function is called when an inode is deleted.
- */
-void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
+static struct ubifs_orphan *lookup_orphan(struct ubifs_info *c, ino_t inum)
{
struct ubifs_orphan *o;
struct rb_node *p;
- spin_lock(&c->orphan_lock);
p = c->orph_tree.rb_node;
while (p) {
o = rb_entry(p, struct ubifs_orphan, rb);
@@ -126,37 +118,124 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
else if (inum > o->inum)
p = p->rb_right;
else {
- if (o->del) {
- spin_unlock(&c->orphan_lock);
- dbg_gen("deleted twice ino %lu",
- (unsigned long)inum);
- return;
- }
- if (o->cmt) {
- o->del = 1;
- o->dnext = c->orph_dnext;
- c->orph_dnext = o;
- spin_unlock(&c->orphan_lock);
- dbg_gen("delete later ino %lu",
- (unsigned long)inum);
- return;
- }
- rb_erase(p, &c->orph_tree);
- list_del(&o->list);
- c->tot_orphans -= 1;
- if (o->new) {
- list_del(&o->new_list);
- c->new_orphans -= 1;
- }
- spin_unlock(&c->orphan_lock);
- kfree(o);
- dbg_gen("inum %lu", (unsigned long)inum);
- return;
+ return o;
}
}
+ return NULL;
+}
+
+static void __orphan_drop(struct ubifs_info *c, struct ubifs_orphan *o)
+{
+ rb_erase(&o->rb, &c->orph_tree);
+ list_del(&o->list);
+ c->tot_orphans -= 1;
+
+ if (o->new) {
+ list_del(&o->new_list);
+ c->new_orphans -= 1;
+ }
+
+ kfree(o);
+}
+
+static void orphan_delete(struct ubifs_info *c, ino_t inum)
+{
+ struct ubifs_orphan *orph, *child_orph, *tmp_o;
+
+ spin_lock(&c->orphan_lock);
+
+ orph = lookup_orphan(c, inum);
+ if (!orph) {
+ spin_unlock(&c->orphan_lock);
+ ubifs_err(c, "missing orphan ino %lu", (unsigned long)inum);
+ dump_stack();
+
+ return;
+ }
+
+ if (orph->del) {
+ spin_unlock(&c->orphan_lock);
+ dbg_gen("deleted twice ino %lu",
+ (unsigned long)inum);
+ return;
+ }
+
+ if (orph->cmt) {
+ orph->del = 1;
+ orph->dnext = c->orph_dnext;
+ c->orph_dnext = orph;
+ spin_unlock(&c->orphan_lock);
+ dbg_gen("delete later ino %lu",
+ (unsigned long)inum);
+ return;
+ }
+
+ list_for_each_entry_safe(child_orph, tmp_o, &orph->child_list, child_list) {
+ list_del(&child_orph->child_list);
+ __orphan_drop(c, child_orph);
+ }
+
+ __orphan_drop(c, orph);
+
spin_unlock(&c->orphan_lock);
- ubifs_err(c, "missing orphan ino %lu", (unsigned long)inum);
- dump_stack();
+}
+
+/**
+ * ubifs_add_orphan - add an orphan.
+ * @c: UBIFS file-system description object
+ * @inum: orphan inode number
+ *
+ * Add an orphan. This function is called when an inodes link count drops to
+ * zero.
+ */
+int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
+{
+ int err = 0;
+ ino_t xattr_inum;
+ union ubifs_key key;
+ struct ubifs_dent_node *xent;
+ struct qstr nm = {0};
+ struct ubifs_orphan *xattr_orphan;
+ struct ubifs_orphan *orphan;
+
+ orphan = orphan_add(c, inum, NULL);
+ if (IS_ERR(orphan))
+ return PTR_ERR(orphan);
+
+ lowest_xent_key(c, &key, inum);
+ while (1) {
+ xent = ubifs_tnc_next_ent(c, &key, &nm);
+ if (IS_ERR(xent)) {
+ err = PTR_ERR(xent);
+ if (err == -ENOENT)
+ break;
+ return err;
+ }
+
+ nm.name = xent->name;
+ nm.len = le16_to_cpu(xent->nlen);
+ xattr_inum = le64_to_cpu(xent->inum);
+
+ xattr_orphan = orphan_add(c, xattr_inum, orphan);
+ if (IS_ERR(xattr_orphan))
+ return PTR_ERR(xattr_orphan);
+
+ key_read(c, &xent->key, &key);
+ }
+
+ return 0;
+}
+
+/**
+ * ubifs_delete_orphan - delete an orphan.
+ * @c: UBIFS file-system description object
+ * @inum: orphan inode number
+ *
+ * Delete an orphan. This function is called when an inode is deleted.
+ */
+void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
+{
+ orphan_delete(c, inum);
}
/**
@@ -611,10 +690,16 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3;
for (i = 0; i < n; i++) {
+ union ubifs_key key1, key2;
+
inum = le64_to_cpu(orph->inos[i]);
dbg_rcvry("deleting orphaned inode %lu",
(unsigned long)inum);
- err = ubifs_tnc_remove_ino(c, inum);
+
+ lowest_ino_key(c, &key1, inum);
+ highest_ino_key(c, &key2, inum);
+
+ err = ubifs_tnc_remove_range(c, &key1, &key2);
if (err)
return err;
err = insert_dead_orphan(c, inum);
@@ -744,26 +829,15 @@ struct check_info {
struct rb_root root;
};
-static int dbg_find_orphan(struct ubifs_info *c, ino_t inum)
+static bool dbg_find_orphan(struct ubifs_info *c, ino_t inum)
{
- struct ubifs_orphan *o;
- struct rb_node *p;
+ bool found = false;
spin_lock(&c->orphan_lock);
- p = c->orph_tree.rb_node;
- while (p) {
- o = rb_entry(p, struct ubifs_orphan, rb);
- if (inum < o->inum)
- p = p->rb_left;
- else if (inum > o->inum)
- p = p->rb_right;
- else {
- spin_unlock(&c->orphan_lock);
- return 1;
- }
- }
+ found = !!lookup_orphan(c, inum);
spin_unlock(&c->orphan_lock);
- return 0;
+
+ return found;
}
static int dbg_ins_check_orphan(struct rb_root *root, ino_t inum)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 7968b7a5e787..6ca3d89932af 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1465,6 +1465,8 @@ static int mount_ubifs(struct ubifs_info *c)
c->bud_bytes, c->bud_bytes >> 10, c->bud_bytes >> 20);
dbg_gen("max. seq. number: %llu", c->max_sqnum);
dbg_gen("commit number: %llu", c->cmt_no);
+ dbg_gen("max. xattrs per inode: %d", ubifs_xattr_max_cnt(c));
+ dbg_gen("max orphans: %d", c->max_orphans);
return 0;
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index a5697de763f5..2cdf3c3f03fc 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -912,6 +912,8 @@ struct ubifs_budget_req {
* @rb: rb-tree node of rb-tree of orphans sorted by inode number
* @list: list head of list of orphans in order added
* @new_list: list head of list of orphans added since the last commit
+ * @child_list: list of xattr childs if this orphan hosts xattrs, list head
+ * if this orphan is a xattr, not used otherwise.
* @cnext: next orphan to commit
* @dnext: next orphan to delete
* @inum: inode number
@@ -923,6 +925,7 @@ struct ubifs_orphan {
struct rb_node rb;
struct list_head list;
struct list_head new_list;
+ struct list_head child_list;
struct ubifs_orphan *cnext;
struct ubifs_orphan *dnext;
ino_t inum;
@@ -1761,9 +1764,23 @@ int ubifs_setxattr(struct dentry *dentry, const char *name,
ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
size_t size);
ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size);
+int ubifs_purge_xattrs(struct inode *host);
+
+#ifdef CONFIG_UBIFS_FS_XATTR
int ubifs_removexattr(struct dentry *dentry, const char *name);
-int ubifs_init_security(struct inode *dentry, struct inode *inode,
+#endif
+
+#ifdef CONFIG_UBIFS_FS_SECURITY
+extern int ubifs_init_security(struct inode *dentry, struct inode *inode,
const struct qstr *qstr);
+#else
+static inline int ubifs_init_security(struct inode *dentry,
+ struct inode *inode, const struct qstr *qstr)
+{
+ return 0;
+}
+#endif
+
/* super.c */
struct inode *ubifs_iget(struct super_block *sb, unsigned long inum);
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index b5bf23b34241..1283867988dc 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -62,12 +62,6 @@
#include <linux/posix_acl_xattr.h>
/*
- * Limit the number of extended attributes per inode so that the total size
- * (@xattr_size) is guaranteeded to fit in an 'unsigned int'.
- */
-#define MAX_XATTRS_PER_INODE 65535
-
-/*
* Extended attribute type constants.
*
* USER_XATTR: user extended attribute ("user.*")
@@ -107,7 +101,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
.new_ino_d = ALIGN(size, 8), .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
- if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE) {
+ if (host_ui->xattr_cnt >= ubifs_xattr_max_cnt(c)) {
ubifs_err(c, "inode %lu already has too many xattrs (%d), cannot create more",
host->i_ino, host_ui->xattr_cnt);
return -ENOSPC;
@@ -541,6 +535,69 @@ out_cancel:
return err;
}
+int ubifs_purge_xattrs(struct inode *host)
+{
+ union ubifs_key key;
+ struct ubifs_info *c = host->i_sb->s_fs_info;
+ struct ubifs_dent_node *xent, *pxent = NULL;
+ struct inode *xino;
+ struct qstr nm = {0};
+ int err;
+
+ if (ubifs_inode(host)->xattr_cnt < ubifs_xattr_max_cnt(c))
+ return 0;
+
+ ubifs_warn(c, "inode %lu has too many xattrs, doing a non-atomic deletion",
+ host->i_ino);
+
+ lowest_xent_key(c, &key, host->i_ino);
+ while (1) {
+ xent = ubifs_tnc_next_ent(c, &key, &nm);
+ if (IS_ERR(xent)) {
+ err = PTR_ERR(xent);
+ break;
+ }
+
+ nm.name = xent->name;
+ nm.len = le16_to_cpu(xent->nlen);
+
+ xino = ubifs_iget(c->vfs_sb, xent->inum);
+ if (IS_ERR(xino)) {
+ err = PTR_ERR(xino);
+ ubifs_err(c, "dead directory entry '%s', error %d",
+ xent->name, err);
+ ubifs_ro_mode(c, err);
+ kfree(pxent);
+ return err;
+ }
+
+ ubifs_assert(ubifs_inode(xino)->xattr);
+
+ clear_nlink(xino);
+ err = remove_xattr(c, host, xino, &nm);
+ if (err) {
+ kfree(pxent);
+ iput(xino);
+ ubifs_err(c, "cannot remove xattr, error %d", err);
+ return err;
+ }
+
+ iput(xino);
+
+ kfree(pxent);
+ pxent = xent;
+ key_read(c, &xent->key, &key);
+ }
+
+ kfree(pxent);
+ if (err != -ENOENT) {
+ ubifs_err(c, "cannot find next direntry, error %d", err);
+ return err;
+ }
+
+ return 0;
+}
+
int ubifs_removexattr(struct dentry *dentry, const char *name)
{
struct inode *inode, *host = d_inode(dentry);
@@ -590,6 +647,7 @@ out_free:
return err;
}
+#ifdef CONFIG_UBIFS_FS_SECURITY
static int init_xattrs(struct inode *inode, const struct xattr *xattr_array,
void *fs_info)
{
@@ -629,3 +687,4 @@ int ubifs_init_security(struct inode *dentry, struct inode *inode,
}
return err;
}
+#endif
diff --git a/include/crypto/pkcs7.h b/include/crypto/pkcs7.h
index 441aff9b5aa7..8323e3e57131 100644
--- a/include/crypto/pkcs7.h
+++ b/include/crypto/pkcs7.h
@@ -12,6 +12,7 @@
#ifndef _CRYPTO_PKCS7_H
#define _CRYPTO_PKCS7_H
+#include <linux/verification.h>
#include <crypto/public_key.h>
struct key;
@@ -26,7 +27,7 @@ extern void pkcs7_free_message(struct pkcs7_message *pkcs7);
extern int pkcs7_get_content_data(const struct pkcs7_message *pkcs7,
const void **_data, size_t *_datalen,
- bool want_wrapper);
+ size_t *_headerlen);
/*
* pkcs7_trust.c
diff --git a/include/crypto/public_key.h b/include/crypto/public_key.h
index cc2516df0efa..de50d026576d 100644
--- a/include/crypto/public_key.h
+++ b/include/crypto/public_key.h
@@ -39,20 +39,6 @@ enum pkey_id_type {
extern const char *const pkey_id_type_name[PKEY_ID_TYPE__LAST];
/*
- * The use to which an asymmetric key is being put.
- */
-enum key_being_used_for {
- VERIFYING_MODULE_SIGNATURE,
- VERIFYING_FIRMWARE_SIGNATURE,
- VERIFYING_KEXEC_PE_SIGNATURE,
- VERIFYING_KEY_SIGNATURE,
- VERIFYING_KEY_SELF_SIGNATURE,
- VERIFYING_UNSPECIFIED_SIGNATURE,
- NR__KEY_BEING_USED_FOR
-};
-extern const char *const key_being_used_for[NR__KEY_BEING_USED_FOR];
-
-/*
* Cryptographic data for the public-key subtype of the asymmetric key type.
*
* Note that this may include private part of the key as well as the public
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 8cba54a2a0a0..8045cdea8cc9 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -81,6 +81,12 @@ int drm_atomic_helper_set_config(struct drm_mode_set *set);
int __drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_atomic_state *state);
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+ struct drm_modeset_acquire_ctx *ctx);
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev);
+int drm_atomic_helper_resume(struct drm_device *dev,
+ struct drm_atomic_state *state);
+
int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
struct drm_property *property,
uint64_t val);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 3f0c6909dda1..69726121e029 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -122,6 +122,14 @@ enum subpixel_order {
#define DRM_COLOR_FORMAT_RGB444 (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
+
+#define DRM_BUS_FLAG_DE_LOW (1<<0)
+#define DRM_BUS_FLAG_DE_HIGH (1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+
/*
* Describes a given display (e.g. CRT or flat panel) and its limitations.
*/
@@ -143,6 +151,7 @@ struct drm_display_info {
const u32 *bus_formats;
unsigned int num_bus_formats;
+ u32 bus_flags;
/* Mask of supported hdmi deep color modes */
u8 edid_hdmi_dc_modes;
diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h
index c54cf3d4a03f..5612984baa99 100644
--- a/include/drm/drm_fb_cma_helper.h
+++ b/include/drm/drm_fb_cma_helper.h
@@ -12,6 +12,7 @@ struct drm_mode_fb_cmd2;
struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev,
unsigned int preferred_bpp, unsigned int num_crtc,
unsigned int max_conn_count);
+struct drm_fb_helper *drm_fbdev_cma_get_helper(struct drm_fbdev_cma *fbdev_cma);
void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma);
void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma);
diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h
index 94938d89347c..c5576fbcb909 100644
--- a/include/drm/drm_modeset_lock.h
+++ b/include/drm/drm_modeset_lock.h
@@ -138,7 +138,7 @@ void drm_warn_on_modeset_not_all_locked(struct drm_device *dev);
struct drm_modeset_acquire_ctx *
drm_modeset_legacy_acquire_ctx(struct drm_crtc *crtc);
-int drm_modeset_lock_all_crtcs(struct drm_device *dev,
- struct drm_modeset_acquire_ctx *ctx);
+int drm_modeset_lock_all_ctx(struct drm_device *dev,
+ struct drm_modeset_acquire_ctx *ctx);
#endif /* DRM_MODESET_LOCK_H_ */
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index 56c16aaea112..43c9e2282dae 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -195,6 +195,11 @@
#define VF610_CLK_SNVS 182
#define VF610_CLK_DAP 183
#define VF610_CLK_OCOTP 184
-#define VF610_CLK_END 185
+#define VF610_CLK_TCON0 185
+#define VF610_CLK_TCON1 186
+#define VF610_CLK_DDRMC 187
+#define VF610_CLK_WKPU 188
+#define VF610_CLK_ESW 189
+#define VF610_CLK_END 190
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/keys/asymmetric-type.h b/include/keys/asymmetric-type.h
index 59c1df9cf922..72c18c1f3308 100644
--- a/include/keys/asymmetric-type.h
+++ b/include/keys/asymmetric-type.h
@@ -15,6 +15,7 @@
#define _KEYS_ASYMMETRIC_TYPE_H
#include <linux/key-type.h>
+#include <linux/verification.h>
extern struct key_type key_type_asymmetric;
diff --git a/include/keys/system_keyring.h b/include/keys/system_keyring.h
index b20cd885c1fd..b2d645ac35a0 100644
--- a/include/keys/system_keyring.h
+++ b/include/keys/system_keyring.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_SYSTEM_TRUSTED_KEYRING
#include <linux/key.h>
+#include <linux/verification.h>
#include <crypto/public_key.h>
extern struct key *system_trusted_keyring;
@@ -29,10 +30,28 @@ static inline struct key *get_system_trusted_keyring(void)
}
#endif
-#ifdef CONFIG_SYSTEM_DATA_VERIFICATION
-extern int system_verify_data(const void *data, unsigned long len,
- const void *raw_pkcs7, size_t pkcs7_len,
- enum key_being_used_for usage);
-#endif
+#ifdef CONFIG_IMA_MOK_KEYRING
+extern struct key *ima_mok_keyring;
+extern struct key *ima_blacklist_keyring;
+
+static inline struct key *get_ima_mok_keyring(void)
+{
+ return ima_mok_keyring;
+}
+static inline struct key *get_ima_blacklist_keyring(void)
+{
+ return ima_blacklist_keyring;
+}
+#else
+static inline struct key *get_ima_mok_keyring(void)
+{
+ return NULL;
+}
+static inline struct key *get_ima_blacklist_keyring(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_IMA_MOK_KEYRING */
+
#endif /* _KEYS_SYSTEM_KEYRING_H */
diff --git a/include/linux/input/fusion_F0710A.h b/include/linux/input/fusion_F0710A.h
new file mode 100644
index 000000000000..7d152cbdd06e
--- /dev/null
+++ b/include/linux/input/fusion_F0710A.h
@@ -0,0 +1,20 @@
+/* linux/input/fusion_F0710A.h
+ *
+ * Platform data for Fusion F0710A driver
+ *
+ * Copyright (c) 2013 Toradex AG (stefan.agner@toradex.ch)
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_I2C_FUSION_F0710A_H
+#define __LINUX_I2C_FUSION_F0710A_H
+
+/* Board specific touch screen initial values */
+struct fusion_f0710a_init_data {
+ int (*pinmux_fusion_pins)(void);
+ int gpio_int;
+ int gpio_reset;
+};
+
+#endif /* __LINUX_I2C_FUSION_F0710A_H */
diff --git a/include/linux/key.h b/include/linux/key.h
index af071ca73079..7a28716f7d5c 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -178,9 +178,9 @@ struct key {
#define KEY_FLAG_ROOT_CAN_CLEAR 4 /* set if key can be cleared by root without permission */
#define KEY_FLAG_INVALIDATED 5 /* set if key has been invalidated */
#define KEY_FLAG_TRUSTED 6 /* set if key is trusted */
-#define KEY_FLAG_TRUSTED_ONLY 7 /* set if keyring only accepts links to trusted keys */
-#define KEY_FLAG_BUILTIN 8 /* set if key is builtin */
-#define KEY_FLAG_ROOT_CAN_INVAL 9 /* set if key can be invalidated by root without permission */
+#define KEY_FLAG_BUILTIN 7 /* set if key is builtin */
+#define KEY_FLAG_ROOT_CAN_INVAL 8 /* set if key can be invalidated by root without permission */
+#define KEY_FLAG_KEEP 9 /* set if key should not be removed */
#define KEY_FLAG_UID_KEYRING 10 /* set if key is a user or user session keyring */
/* the key type and key description string
@@ -208,6 +208,21 @@ struct key {
struct assoc_array keys;
};
};
+
+ /* This is set on a keyring to restrict the addition of a link to a key
+ * to it. If this method isn't provided then it is assumed that the
+ * keyring is open to any addition. It is ignored for non-keyring
+ * keys.
+ *
+ * This is intended for use with rings of trusted keys whereby addition
+ * to the keyring needs to be controlled. KEY_ALLOC_BYPASS_RESTRICTION
+ * overrides this, allowing the kernel to add extra keys without
+ * restriction.
+ */
+ int (*restrict_link)(struct key *keyring,
+ const struct key_type *type,
+ unsigned long flags,
+ const union key_payload *payload);
};
extern struct key *key_alloc(struct key_type *type,
@@ -215,14 +230,20 @@ extern struct key *key_alloc(struct key_type *type,
kuid_t uid, kgid_t gid,
const struct cred *cred,
key_perm_t perm,
- unsigned long flags);
+ unsigned long flags,
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *));
-#define KEY_ALLOC_IN_QUOTA 0x0000 /* add to quota, reject if would overrun */
-#define KEY_ALLOC_QUOTA_OVERRUN 0x0001 /* add to quota, permit even if overrun */
-#define KEY_ALLOC_NOT_IN_QUOTA 0x0002 /* not in quota */
-#define KEY_ALLOC_TRUSTED 0x0004 /* Key should be flagged as trusted */
-#define KEY_ALLOC_UID_KEYRING 0x0010 /* allocating a user or user session keyring */
+#define KEY_ALLOC_IN_QUOTA 0x0000 /* add to quota, reject if would overrun */
+#define KEY_ALLOC_QUOTA_OVERRUN 0x0001 /* add to quota, permit even if overrun */
+#define KEY_ALLOC_NOT_IN_QUOTA 0x0002 /* not in quota */
+#define KEY_ALLOC_TRUSTED 0x0004 /* Key should be flagged as trusted */
+#define KEY_ALLOC_BUILT_IN 0x0008 /* Key is built into kernel */
+#define KEY_ALLOC_BYPASS_RESTRICTION 0x0010 /* Override the check on restricted keyrings */
+#define KEY_ALLOC_UID_KEYRING 0x0020 /* allocating a user or user session keyring */
extern void key_revoke(struct key *key);
extern void key_invalidate(struct key *key);
@@ -291,8 +312,22 @@ extern struct key *keyring_alloc(const char *description, kuid_t uid, kgid_t gid
const struct cred *cred,
key_perm_t perm,
unsigned long flags,
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *),
struct key *dest);
+extern int keyring_restrict_trusted_only(struct key *keyring,
+ const struct key_type *type,
+ unsigned long,
+ const union key_payload *payload);
+
+extern int restrict_link_reject(struct key *keyring,
+ const struct key_type *type,
+ unsigned long flags,
+ const union key_payload *payload);
+
extern int keyring_clear(struct key *keyring);
extern key_ref_t keyring_search(key_ref_t keyring,
diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h
index ca5bd91d12e1..2be299513819 100644
--- a/include/linux/linux_logo.h
+++ b/include/linux/linux_logo.h
@@ -47,6 +47,7 @@ extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
extern const struct linux_logo logo_m32r_clut224;
extern const struct linux_logo logo_spe_clut224;
+extern const struct linux_logo logo_custom_clut224;
extern const struct linux_logo *fb_find_logo(int depth);
#ifdef CONFIG_FB_LOGO_EXTRA
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 75e543b78f53..3c02ed9a6c98 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -26,6 +26,9 @@ extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
extern struct regmap *syscon_regmap_lookup_by_phandle(
struct device_node *np,
const char *property);
+extern int syscon_regmap_read_from_offset(struct device_node *np,
+ const char *s,
+ unsigned int *val);
#else
static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
{
@@ -48,6 +51,13 @@ static inline struct regmap *syscon_regmap_lookup_by_phandle(
{
return ERR_PTR(-ENOSYS);
}
+
+static inline int syscon_regmap_read_from_offset(struct device_node *np,
+ const char *s,
+ unsigned int *val)
+{
+ return ERR_PTR(-ENOSYS);
+}
#endif
#endif /* __LINUX_MFD_SYSCON_H__ */
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index f9be467d6695..b8b1706a9444 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -12,7 +12,7 @@ struct ci_hdrc;
/**
* struct ci_hdrc_cable - structure for external connector cable state tracking
- * @state: current state of the line
+ * @connected: true if cable is connected, false otherwise
* @changed: set to true when extcon event happen
* @enabled: set to true if we've enabled the vbus or id interrupt
* @edev: device which generate events
@@ -21,7 +21,7 @@ struct ci_hdrc;
* @conn: used for notification registration
*/
struct ci_hdrc_cable {
- bool state;
+ bool connected;
bool changed;
bool enabled;
struct extcon_dev *edev;
diff --git a/include/linux/verification.h b/include/linux/verification.h
new file mode 100644
index 000000000000..bb0fcf941cb7
--- /dev/null
+++ b/include/linux/verification.h
@@ -0,0 +1,50 @@
+/* Signature verification
+ *
+ * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_VERIFICATION_H
+#define _LINUX_VERIFICATION_H
+
+/*
+ * The use to which an asymmetric key is being put.
+ */
+enum key_being_used_for {
+ VERIFYING_MODULE_SIGNATURE,
+ VERIFYING_FIRMWARE_SIGNATURE,
+ VERIFYING_KEXEC_PE_SIGNATURE,
+ VERIFYING_KEY_SIGNATURE,
+ VERIFYING_KEY_SELF_SIGNATURE,
+ VERIFYING_UNSPECIFIED_SIGNATURE,
+ NR__KEY_BEING_USED_FOR
+};
+extern const char *const key_being_used_for[NR__KEY_BEING_USED_FOR];
+
+#ifdef CONFIG_SYSTEM_DATA_VERIFICATION
+
+struct key;
+
+extern int verify_pkcs7_signature(const void *data, size_t len,
+ const void *raw_pkcs7, size_t pkcs7_len,
+ struct key *trusted_keys,
+ int untrusted_error,
+ enum key_being_used_for usage,
+ int (*view_content)(void *ctx,
+ const void *data, size_t len,
+ size_t asn1hdrlen),
+ void *ctx);
+
+#ifdef CONFIG_SIGNED_PE_FILE_VERIFICATION
+extern int verify_pefile_signature(const void *pebuf, unsigned pelen,
+ struct key *trusted_keys,
+ enum key_being_used_for usage);
+#endif
+
+#endif /* CONFIG_SYSTEM_DATA_VERIFICATION */
+#endif /* _LINUX_VERIFY_PEFILE_H */
diff --git a/include/linux/verify_pefile.h b/include/linux/verify_pefile.h
deleted file mode 100644
index da2049b5161c..000000000000
--- a/include/linux/verify_pefile.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Signed PE file verification
- *
- * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _LINUX_VERIFY_PEFILE_H
-#define _LINUX_VERIFY_PEFILE_H
-
-#include <crypto/public_key.h>
-
-extern int verify_pefile_signature(const void *pebuf, unsigned pelen,
- struct key *trusted_keyring,
- enum key_being_used_for usage,
- bool *_trusted);
-
-#endif /* _LINUX_VERIFY_PEFILE_H */
diff --git a/include/linux/vf610_mscm.h b/include/linux/vf610_mscm.h
new file mode 100644
index 000000000000..c551b50e700c
--- /dev/null
+++ b/include/linux/vf610_mscm.h
@@ -0,0 +1,13 @@
+#ifndef __VF610_MSCM__
+#define __VF610_MSCM__
+
+#include <linux/interrupt.h>
+
+int mscm_request_cpu2cpu_irq(unsigned int intid, irq_handler_t handler,
+ const char *name, void *priv);
+void mscm_free_cpu2cpu_irq(unsigned int intid, void *priv);
+void mscm_trigger_cpu2cpu_irq(unsigned int intid, int cpuid);
+void mscm_enable_cpu2cpu_irq(unsigned int intid);
+void mscm_disable_cpu2cpu_irq(unsigned int intid);
+
+#endif /* __VF610_MSCM__ */
diff --git a/include/linux/vf610_sema4.h b/include/linux/vf610_sema4.h
new file mode 100644
index 000000000000..a57de2303e9a
--- /dev/null
+++ b/include/linux/vf610_sema4.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2016 Toradex AG.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_VF610_SEMA4_H__
+#define __LINUX_VF610_SEMA4_H__
+
+#define SEMA4_NUM_DEVICES 1
+#define SEMA4_NUM_GATES 16
+
+#define SEMA4_UNLOCK 0x00
+#define SEMA4_A5_LOCK 0x01
+#define SEMA4_GATE_MASK 0x03
+
+#define CORE_MUTEX_VALID (('c'<<24)|('m'<<24)|('t'<<24)|'x')
+
+/*
+ * The enumerates
+ */
+enum {
+ /* sema4 registers offset */
+ SEMA4_CP0INE = 0x42,
+ SEMA4_CP1INE = 0x4A,
+ SEMA4_CP0NTF = 0x82,
+ SEMA4_CP1NTF = 0x8A,
+};
+
+static const unsigned int idx_sema4[SEMA4_NUM_GATES] = {
+ 1 << 15, 1 << 14, 1 << 13, 1 << 12,
+ 1 << 11, 1 << 10, 1 << 9, 1 << 8,
+ 1 << 7, 1 << 6, 1 << 5, 1 << 4,
+ 1 << 3, 1 << 2, 1 << 1, 1 << 0,
+};
+
+struct vf610_sema4_mutex {
+ u32 valid;
+ u32 gate_num;
+ unsigned char gate_val;
+ wait_queue_head_t wait_q;
+};
+
+struct vf610_sema4_mutex_device {
+ struct device *dev;
+ u16 cpntf_val;
+ u16 cpine_val;
+ void __iomem *ioaddr; /* Mapped address */
+ spinlock_t lock; /* Mutex */
+ int irq;
+
+ u16 alloced;
+ struct vf610_sema4_mutex *mutex_ptr[SEMA4_NUM_GATES];
+};
+
+struct vf610_sema4_mutex *
+ vf610_sema4_mutex_create(u32 dev_num, u32 mutex_num);
+#ifdef CONFIG_VF610_SEMA4
+int vf610_sema4_mutex_destroy(struct vf610_sema4_mutex *mutex_ptr);
+int vf610_sema4_mutex_trylock(struct vf610_sema4_mutex *mutex_ptr);
+int vf610_sema4_mutex_lock(struct vf610_sema4_mutex *mutex_ptr);
+int vf610_sema4_mutex_unlock(struct vf610_sema4_mutex *mutex_ptr);
+#else
+static inline int vf610_sema4_mutex_destroy(struct vf610_sema4_mutex *mutex_ptr)
+{
+ return 0;
+}
+static inline int vf610_sema4_mutex_trylock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ return 0;
+}
+static inline int vf610_sema4_mutex_lock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ return 0;
+}
+static inline int vf610_sema4_mutex_unlock(struct vf610_sema4_mutex *mutex_ptr)
+{
+ return 0;
+}
+#endif
+#endif /* __LINUX_VF610_SEMA4_H__ */
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index 6528a79d998d..70cf0220efeb 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -73,6 +73,7 @@ int mod_verify_sig(const void *mod, unsigned long *_modlen)
return -EBADMSG;
}
- return system_verify_data(mod, modlen, mod + modlen, sig_len,
- VERIFYING_MODULE_SIGNATURE);
+ return verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+ NULL, -ENOKEY, VERIFYING_MODULE_SIGNATURE,
+ NULL, NULL);
}
diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c
index 1689c7bdf1c9..5f5d9eafccf5 100644
--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -284,7 +284,7 @@ static int __init init_dns_resolver(void)
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
(KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ,
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ KEY_ALLOC_NOT_IN_QUOTA, NULL, NULL);
if (IS_ERR(keyring)) {
ret = PTR_ERR(keyring);
goto failed_put_cred;
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index 91d43ab3a961..83d18768eac3 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -981,7 +981,7 @@ int rxrpc_get_server_data_key(struct rxrpc_connection *conn,
key = key_alloc(&key_type_rxrpc, "x",
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred, 0,
- KEY_ALLOC_NOT_IN_QUOTA);
+ KEY_ALLOC_NOT_IN_QUOTA, NULL);
if (IS_ERR(key)) {
_leave(" = -ENOMEM [alloc %ld]", PTR_ERR(key));
return -ENOMEM;
@@ -1028,7 +1028,7 @@ struct key *rxrpc_get_null_key(const char *keyname)
key = key_alloc(&key_type_rxrpc, keyname,
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
- KEY_POS_SEARCH, KEY_ALLOC_NOT_IN_QUOTA);
+ KEY_POS_SEARCH, KEY_ALLOC_NOT_IN_QUOTA, NULL);
if (IS_ERR(key))
return key;
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index da72ed32f143..b87f86e25da5 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,5 @@
config WIRELESS_EXT
- bool
+ bool "WIRELESS_EXT - wireless core extensions"
config WEXT_CORE
def_bool y
@@ -14,7 +14,7 @@ config WEXT_SPY
bool
config WEXT_PRIV
- bool
+ bool "WEXT_PRIV - Wireless Extensions priv API"
config CFG80211
tristate "cfg80211 - wireless configuration API"
diff --git a/scripts/.gitignore b/scripts/.gitignore
index 1f78169d4254..e063daa3ec4a 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -13,3 +13,4 @@ sortextable
asn1_compiler
extract-cert
sign-file
+insert-sys-cert
diff --git a/scripts/Makefile b/scripts/Makefile
index fd0d53d4a234..822ab4a6a4aa 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -19,6 +19,7 @@ hostprogs-$(CONFIG_BUILDTIME_EXTABLE_SORT) += sortextable
hostprogs-$(CONFIG_ASN1) += asn1_compiler
hostprogs-$(CONFIG_MODULE_SIG) += sign-file
hostprogs-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert
+hostprogs-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert
HOSTCFLAGS_sortextable.o = -I$(srctree)/tools/include
HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
diff --git a/scripts/insert-sys-cert.c b/scripts/insert-sys-cert.c
new file mode 100644
index 000000000000..8902836c2342
--- /dev/null
+++ b/scripts/insert-sys-cert.c
@@ -0,0 +1,410 @@
+/* Write the contents of the <certfile> into kernel symbol system_extra_cert
+ *
+ * Copyright (C) IBM Corporation, 2015
+ *
+ * Author: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * Usage: insert-sys-cert [-s <System.map> -b <vmlinux> -c <certfile>
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#include <limits.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <elf.h>
+
+#define CERT_SYM "system_extra_cert"
+#define USED_SYM "system_extra_cert_used"
+#define LSIZE_SYM "system_certificate_list_size"
+
+#define info(format, args...) fprintf(stderr, "INFO: " format, ## args)
+#define warn(format, args...) fprintf(stdout, "WARNING: " format, ## args)
+#define err(format, args...) fprintf(stderr, "ERROR: " format, ## args)
+
+#if UINTPTR_MAX == 0xffffffff
+#define CURRENT_ELFCLASS ELFCLASS32
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#else
+#define CURRENT_ELFCLASS ELFCLASS64
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#endif
+
+static unsigned char endianness(void)
+{
+ uint16_t two_byte = 0x00FF;
+ uint8_t low_address = *((uint8_t *)&two_byte);
+
+ if (low_address == 0)
+ return ELFDATA2MSB;
+ else
+ return ELFDATA2LSB;
+}
+
+struct sym {
+ char *name;
+ unsigned long address;
+ unsigned long offset;
+ void *content;
+ int size;
+};
+
+static unsigned long get_offset_from_address(Elf_Ehdr *hdr, unsigned long addr)
+{
+ Elf_Shdr *x;
+ unsigned int i, num_sections;
+
+ x = (void *)hdr + hdr->e_shoff;
+ if (hdr->e_shnum == SHN_UNDEF)
+ num_sections = x[0].sh_size;
+ else
+ num_sections = hdr->e_shnum;
+
+ for (i = 1; i < num_sections; i++) {
+ unsigned long start = x[i].sh_addr;
+ unsigned long end = start + x[i].sh_size;
+ unsigned long offset = x[i].sh_offset;
+
+ if (addr >= start && addr <= end)
+ return addr - start + offset;
+ }
+ return 0;
+}
+
+
+#define LINE_SIZE 100
+
+static void get_symbol_from_map(Elf_Ehdr *hdr, FILE *f, char *name,
+ struct sym *s)
+{
+ char l[LINE_SIZE];
+ char *w, *p, *n;
+
+ s->size = 0;
+ s->address = 0;
+ s->offset = 0;
+ if (fseek(f, 0, SEEK_SET) != 0) {
+ perror("File seek failed");
+ exit(EXIT_FAILURE);
+ }
+ while (fgets(l, LINE_SIZE, f)) {
+ p = strchr(l, '\n');
+ if (!p) {
+ err("Missing line ending.\n");
+ return;
+ }
+ n = strstr(l, name);
+ if (n)
+ break;
+ }
+ if (!n) {
+ err("Unable to find symbol: %s\n", name);
+ return;
+ }
+ w = strchr(l, ' ');
+ if (!w)
+ return;
+
+ *w = '\0';
+ s->address = strtoul(l, NULL, 16);
+ if (s->address == 0)
+ return;
+ s->offset = get_offset_from_address(hdr, s->address);
+ s->name = name;
+ s->content = (void *)hdr + s->offset;
+}
+
+static Elf_Sym *find_elf_symbol(Elf_Ehdr *hdr, Elf_Shdr *symtab, char *name)
+{
+ Elf_Sym *sym, *symtab_start;
+ char *strtab, *symname;
+ unsigned int link;
+ Elf_Shdr *x;
+ int i, n;
+
+ x = (void *)hdr + hdr->e_shoff;
+ link = symtab->sh_link;
+ symtab_start = (void *)hdr + symtab->sh_offset;
+ n = symtab->sh_size / symtab->sh_entsize;
+ strtab = (void *)hdr + x[link].sh_offset;
+
+ for (i = 0; i < n; i++) {
+ sym = &symtab_start[i];
+ symname = strtab + sym->st_name;
+ if (strcmp(symname, name) == 0)
+ return sym;
+ }
+ err("Unable to find symbol: %s\n", name);
+ return NULL;
+}
+
+static void get_symbol_from_table(Elf_Ehdr *hdr, Elf_Shdr *symtab,
+ char *name, struct sym *s)
+{
+ Elf_Shdr *sec;
+ int secndx;
+ Elf_Sym *elf_sym;
+ Elf_Shdr *x;
+
+ x = (void *)hdr + hdr->e_shoff;
+ s->size = 0;
+ s->address = 0;
+ s->offset = 0;
+ elf_sym = find_elf_symbol(hdr, symtab, name);
+ if (!elf_sym)
+ return;
+ secndx = elf_sym->st_shndx;
+ if (!secndx)
+ return;
+ sec = &x[secndx];
+ s->size = elf_sym->st_size;
+ s->address = elf_sym->st_value;
+ s->offset = s->address - sec->sh_addr
+ + sec->sh_offset;
+ s->name = name;
+ s->content = (void *)hdr + s->offset;
+}
+
+static Elf_Shdr *get_symbol_table(Elf_Ehdr *hdr)
+{
+ Elf_Shdr *x;
+ unsigned int i, num_sections;
+
+ x = (void *)hdr + hdr->e_shoff;
+ if (hdr->e_shnum == SHN_UNDEF)
+ num_sections = x[0].sh_size;
+ else
+ num_sections = hdr->e_shnum;
+
+ for (i = 1; i < num_sections; i++)
+ if (x[i].sh_type == SHT_SYMTAB)
+ return &x[i];
+ return NULL;
+}
+
+static void *map_file(char *file_name, int *size)
+{
+ struct stat st;
+ void *map;
+ int fd;
+
+ fd = open(file_name, O_RDWR);
+ if (fd < 0) {
+ perror(file_name);
+ return NULL;
+ }
+ if (fstat(fd, &st)) {
+ perror("Could not determine file size");
+ close(fd);
+ return NULL;
+ }
+ *size = st.st_size;
+ map = mmap(NULL, *size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+ if (map == MAP_FAILED) {
+ perror("Mapping to memory failed");
+ close(fd);
+ return NULL;
+ }
+ close(fd);
+ return map;
+}
+
+static char *read_file(char *file_name, int *size)
+{
+ struct stat st;
+ char *buf;
+ int fd;
+
+ fd = open(file_name, O_RDONLY);
+ if (fd < 0) {
+ perror(file_name);
+ return NULL;
+ }
+ if (fstat(fd, &st)) {
+ perror("Could not determine file size");
+ close(fd);
+ return NULL;
+ }
+ *size = st.st_size;
+ buf = malloc(*size);
+ if (!buf) {
+ perror("Allocating memory failed");
+ close(fd);
+ return NULL;
+ }
+ if (read(fd, buf, *size) != *size) {
+ perror("File read failed");
+ close(fd);
+ return NULL;
+ }
+ close(fd);
+ return buf;
+}
+
+static void print_sym(Elf_Ehdr *hdr, struct sym *s)
+{
+ info("sym: %s\n", s->name);
+ info("addr: 0x%lx\n", s->address);
+ info("size: %d\n", s->size);
+ info("offset: 0x%lx\n", (unsigned long)s->offset);
+}
+
+static void print_usage(char *e)
+{
+ printf("Usage %s [-s <System.map>] -b <vmlinux> -c <certfile>\n", e);
+}
+
+int main(int argc, char **argv)
+{
+ char *system_map_file = NULL;
+ char *vmlinux_file = NULL;
+ char *cert_file = NULL;
+ int vmlinux_size;
+ int cert_size;
+ Elf_Ehdr *hdr;
+ char *cert;
+ FILE *system_map;
+ unsigned long *lsize;
+ int *used;
+ int opt;
+ Elf_Shdr *symtab = NULL;
+ struct sym cert_sym, lsize_sym, used_sym;
+
+ while ((opt = getopt(argc, argv, "b:c:s:")) != -1) {
+ switch (opt) {
+ case 's':
+ system_map_file = optarg;
+ break;
+ case 'b':
+ vmlinux_file = optarg;
+ break;
+ case 'c':
+ cert_file = optarg;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (!vmlinux_file || !cert_file) {
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+
+ cert = read_file(cert_file, &cert_size);
+ if (!cert)
+ exit(EXIT_FAILURE);
+
+ hdr = map_file(vmlinux_file, &vmlinux_size);
+ if (!hdr)
+ exit(EXIT_FAILURE);
+
+ if (vmlinux_size < sizeof(*hdr)) {
+ err("Invalid ELF file.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if ((hdr->e_ident[EI_MAG0] != ELFMAG0) ||
+ (hdr->e_ident[EI_MAG1] != ELFMAG1) ||
+ (hdr->e_ident[EI_MAG2] != ELFMAG2) ||
+ (hdr->e_ident[EI_MAG3] != ELFMAG3)) {
+ err("Invalid ELF magic.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_ident[EI_CLASS] != CURRENT_ELFCLASS) {
+ err("ELF class mismatch.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_ident[EI_DATA] != endianness()) {
+ err("ELF endian mismatch.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_shoff > vmlinux_size) {
+ err("Could not find section header.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ symtab = get_symbol_table(hdr);
+ if (!symtab) {
+ warn("Could not find the symbol table.\n");
+ if (!system_map_file) {
+ err("Please provide a System.map file.\n");
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+
+ system_map = fopen(system_map_file, "r");
+ if (!system_map) {
+ perror(system_map_file);
+ exit(EXIT_FAILURE);
+ }
+ get_symbol_from_map(hdr, system_map, CERT_SYM, &cert_sym);
+ get_symbol_from_map(hdr, system_map, USED_SYM, &used_sym);
+ get_symbol_from_map(hdr, system_map, LSIZE_SYM, &lsize_sym);
+ cert_sym.size = used_sym.address - cert_sym.address;
+ } else {
+ info("Symbol table found.\n");
+ if (system_map_file)
+ warn("System.map is ignored.\n");
+ get_symbol_from_table(hdr, symtab, CERT_SYM, &cert_sym);
+ get_symbol_from_table(hdr, symtab, USED_SYM, &used_sym);
+ get_symbol_from_table(hdr, symtab, LSIZE_SYM, &lsize_sym);
+ }
+
+ if (!cert_sym.offset || !lsize_sym.offset || !used_sym.offset)
+ exit(EXIT_FAILURE);
+
+ print_sym(hdr, &cert_sym);
+ print_sym(hdr, &used_sym);
+ print_sym(hdr, &lsize_sym);
+
+ lsize = (unsigned long *)lsize_sym.content;
+ used = (int *)used_sym.content;
+
+ if (cert_sym.size < cert_size) {
+ err("Certificate is larger than the reserved area!\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* If the existing cert is the same, don't overwrite */
+ if (cert_size == *used &&
+ strncmp(cert_sym.content, cert, cert_size) == 0) {
+ warn("Certificate was already inserted.\n");
+ exit(EXIT_SUCCESS);
+ }
+
+ if (*used > 0)
+ warn("Replacing previously inserted certificate.\n");
+
+ memcpy(cert_sym.content, cert, cert_size);
+ if (cert_size < cert_sym.size)
+ memset(cert_sym.content + cert_size,
+ 0, cert_sym.size - cert_size);
+
+ *lsize = *lsize + cert_size - *used;
+ *used = cert_size;
+ info("Inserted the contents of %s into %lx.\n", cert_file,
+ cert_sym.address);
+ info("Used %d bytes out of %d bytes reserved.\n", *used,
+ cert_sym.size);
+ exit(EXIT_SUCCESS);
+}
diff --git a/security/integrity/Kconfig b/security/integrity/Kconfig
index 73c457bf5a4a..21d756832b75 100644
--- a/security/integrity/Kconfig
+++ b/security/integrity/Kconfig
@@ -41,6 +41,17 @@ config INTEGRITY_ASYMMETRIC_KEYS
This option enables digital signature verification using
asymmetric keys.
+config INTEGRITY_TRUSTED_KEYRING
+ bool "Require all keys on the integrity keyrings be signed"
+ depends on SYSTEM_TRUSTED_KEYRING
+ depends on INTEGRITY_ASYMMETRIC_KEYS
+ select KEYS_DEBUG_PROC_KEYS
+ default y
+ help
+ This option requires that all keys added to the .ima and
+ .evm keyrings be signed by a key on the system trusted
+ keyring.
+
config INTEGRITY_AUDIT
bool "Enables integrity auditing support "
depends on AUDIT
diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c
index 5be9ffbe90ba..659566c2200b 100644
--- a/security/integrity/digsig.c
+++ b/security/integrity/digsig.c
@@ -24,15 +24,22 @@
static struct key *keyring[INTEGRITY_KEYRING_MAX];
static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
+#ifndef CONFIG_INTEGRITY_TRUSTED_KEYRING
"_evm",
- "_module",
-#ifndef CONFIG_IMA_TRUSTED_KEYRING
"_ima",
#else
+ ".evm",
".ima",
#endif
+ "_module",
};
+#ifdef CONFIG_INTEGRITY_TRUSTED_KEYRING
+static bool init_keyring __initdata = true;
+#else
+static bool init_keyring __initdata;
+#endif
+
int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
const char *digest, int digestlen)
{
@@ -68,15 +75,17 @@ int __init integrity_init_keyring(const unsigned int id)
const struct cred *cred = current_cred();
int err = 0;
+ if (!init_keyring)
+ return 0;
+
keyring[id] = keyring_alloc(keyring_name[id], KUIDT_INIT(0),
KGIDT_INIT(0), cred,
((KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ |
KEY_USR_WRITE | KEY_USR_SEARCH),
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
- if (!IS_ERR(keyring[id]))
- set_bit(KEY_FLAG_TRUSTED_ONLY, &keyring[id]->flags);
- else {
+ KEY_ALLOC_NOT_IN_QUOTA,
+ NULL, NULL);
+ if (IS_ERR(keyring[id])) {
err = PTR_ERR(keyring[id]);
pr_info("Can't allocate %s keyring (%d)\n",
keyring_name[id], err);
diff --git a/security/integrity/digsig_asymmetric.c b/security/integrity/digsig_asymmetric.c
index 4fec1816a2b3..5ade2a7517a6 100644
--- a/security/integrity/digsig_asymmetric.c
+++ b/security/integrity/digsig_asymmetric.c
@@ -17,6 +17,7 @@
#include <linux/key-type.h>
#include <crypto/public_key.h>
#include <keys/asymmetric-type.h>
+#include <keys/system_keyring.h>
#include "integrity.h"
@@ -32,9 +33,22 @@ static struct key *request_asymmetric_key(struct key *keyring, uint32_t keyid)
pr_debug("key search: \"%s\"\n", name);
+ key = get_ima_blacklist_keyring();
+ if (key) {
+ key_ref_t kref;
+
+ kref = keyring_search(make_key_ref(key, 1),
+ &key_type_asymmetric, name);
+ if (!IS_ERR(kref)) {
+ pr_err("Key '%s' is in ima_blacklist_keyring\n", name);
+ return ERR_PTR(-EKEYREJECTED);
+ }
+ }
+
if (keyring) {
/* search in specific keyring */
key_ref_t kref;
+
kref = keyring_search(make_key_ref(keyring, 1),
&key_type_asymmetric, name);
if (IS_ERR(kref))
diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
index 3d145a3ffccf..cc023247a531 100644
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -479,15 +479,17 @@ static int __init init_evm(void)
evm_init_config();
+ error = integrity_init_keyring(INTEGRITY_KEYRING_EVM);
+ if (error)
+ return error;
+
error = evm_init_secfs();
if (error < 0) {
pr_info("Error registering secfs\n");
- goto err;
+ return error;
}
return 0;
-err:
- return error;
}
/*
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 648a0461f8ed..1d4dbae64f8c 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -108,6 +108,27 @@ config IMA_DEFAULT_HASH
default "sha512" if IMA_DEFAULT_HASH_SHA512
default "wp512" if IMA_DEFAULT_HASH_WP512
+config IMA_WRITE_POLICY
+ bool "Enable multiple writes to the IMA policy"
+ depends on IMA
+ default n
+ help
+ IMA policy can now be updated multiple times. The new rules get
+ appended to the original policy. Have in mind that the rules are
+ scanned in FIFO order so be careful when you design and add new ones.
+
+ If unsure, say N.
+
+config IMA_READ_POLICY
+ bool "Enable reading back the current IMA policy"
+ depends on IMA
+ default y if IMA_WRITE_POLICY
+ default n if !IMA_WRITE_POLICY
+ help
+ It is often useful to be able to read back the IMA policy. It is
+ even more important after introducing CONFIG_IMA_WRITE_POLICY.
+ This option allows the root user to see the current policy rules.
+
config IMA_APPRAISE
bool "Appraise integrity measurements"
depends on IMA
@@ -124,14 +145,35 @@ config IMA_APPRAISE
If unsure, say N.
config IMA_TRUSTED_KEYRING
- bool "Require all keys on the .ima keyring be signed"
+ bool "Require all keys on the .ima keyring be signed (deprecated)"
depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING
depends on INTEGRITY_ASYMMETRIC_KEYS
+ select INTEGRITY_TRUSTED_KEYRING
default y
help
This option requires that all keys added to the .ima
keyring be signed by a key on the system trusted keyring.
+ This option is deprecated in favor of INTEGRITY_TRUSTED_KEYRING
+
+config IMA_MOK_KEYRING
+ bool "Create IMA machine owner keys (MOK) and blacklist keyrings"
+ depends on SYSTEM_TRUSTED_KEYRING
+ depends on IMA_TRUSTED_KEYRING
+ default n
+ help
+ This option creates IMA MOK and blacklist keyrings. IMA MOK is an
+ intermediate keyring that sits between .system and .ima keyrings,
+ effectively forming a simple CA hierarchy. To successfully import a
+ key into .ima_mok it must be signed by a key which CA is in .system
+ keyring. On turn any key that needs to go in .ima keyring must be
+ signed by CA in either .system or .ima_mok keyrings. IMA MOK is empty
+ at kernel boot.
+
+ IMA blacklist keyring contains all revoked IMA keys. It is consulted
+ before any other keyring. If the search is successful the requested
+ operation is rejected and error is returned to the caller.
+
config IMA_LOAD_X509
bool "Load X509 certificate onto the '.ima' trusted keyring"
depends on IMA_TRUSTED_KEYRING
diff --git a/security/integrity/ima/Makefile b/security/integrity/ima/Makefile
index d79263d2fdbf..a8539f9e060f 100644
--- a/security/integrity/ima/Makefile
+++ b/security/integrity/ima/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_IMA) += ima.o
ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \
ima_policy.o ima_template.o ima_template_lib.o
ima-$(CONFIG_IMA_APPRAISE) += ima_appraise.o
+obj-$(CONFIG_IMA_MOK_KEYRING) += ima_mok.o
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 5b8dec715a75..660f0e1274bb 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -167,6 +167,10 @@ void ima_update_policy(void);
void ima_update_policy_flag(void);
ssize_t ima_parse_add_rule(char *);
void ima_delete_rules(void);
+void *ima_policy_start(struct seq_file *m, loff_t *pos);
+void *ima_policy_next(struct seq_file *m, void *v, loff_t *pos);
+void ima_policy_stop(struct seq_file *m, void *v);
+int ima_policy_show(struct seq_file *m, void *v);
/* Appraise integrity measurements */
#define IMA_APPRAISE_ENFORCE 0x01
@@ -251,17 +255,12 @@ static inline int security_filter_rule_match(u32 secid, u32 field, u32 op,
{
return -EINVAL;
}
-#endif /* CONFIG_IMA_LSM_RULES */
+#endif /* CONFIG_IMA_TRUSTED_KEYRING */
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static inline int ima_init_keyring(const unsigned int id)
-{
- return integrity_init_keyring(id);
-}
+#ifdef CONFIG_IMA_READ_POLICY
+#define POLICY_FILE_FLAGS (S_IWUSR | S_IRUSR)
#else
-static inline int ima_init_keyring(const unsigned int id)
-{
- return 0;
-}
-#endif /* CONFIG_IMA_TRUSTED_KEYRING */
-#endif
+#define POLICY_FILE_FLAGS S_IWUSR
+#endif /* CONFIG_IMA_WRITE_POLICY */
+
+#endif /* __LINUX_IMA_H */
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 30aced99bc55..6816ef259e7e 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -25,6 +25,8 @@
#include "ima.h"
+static DEFINE_MUTEX(ima_write_mutex);
+
static int valid_policy = 1;
static ssize_t ima_show_htable_value(char __user *buf, size_t count,
@@ -261,6 +263,11 @@ static ssize_t ima_write_policy(struct file *file, const char __user *buf,
{
char *data = NULL;
ssize_t result;
+ int res;
+
+ res = mutex_lock_interruptible(&ima_write_mutex);
+ if (res)
+ return res;
if (datalen >= PAGE_SIZE)
datalen = PAGE_SIZE - 1;
@@ -286,6 +293,8 @@ out:
if (result < 0)
valid_policy = 0;
kfree(data);
+ mutex_unlock(&ima_write_mutex);
+
return result;
}
@@ -302,14 +311,31 @@ enum ima_fs_flags {
static unsigned long ima_fs_flags;
+#ifdef CONFIG_IMA_READ_POLICY
+static const struct seq_operations ima_policy_seqops = {
+ .start = ima_policy_start,
+ .next = ima_policy_next,
+ .stop = ima_policy_stop,
+ .show = ima_policy_show,
+};
+#endif
+
/*
* ima_open_policy: sequentialize access to the policy file
*/
static int ima_open_policy(struct inode *inode, struct file *filp)
{
- /* No point in being allowed to open it if you aren't going to write */
- if (!(filp->f_flags & O_WRONLY))
+ if (!(filp->f_flags & O_WRONLY)) {
+#ifndef CONFIG_IMA_READ_POLICY
return -EACCES;
+#else
+ if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+ return -EACCES;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return seq_open(filp, &ima_policy_seqops);
+#endif
+ }
if (test_and_set_bit(IMA_FS_BUSY, &ima_fs_flags))
return -EBUSY;
return 0;
@@ -326,6 +352,9 @@ static int ima_release_policy(struct inode *inode, struct file *file)
{
const char *cause = valid_policy ? "completed" : "failed";
+ if ((file->f_flags & O_ACCMODE) == O_RDONLY)
+ return 0;
+
pr_info("IMA: policy update %s\n", cause);
integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL,
"policy_update", cause, !valid_policy, 0);
@@ -336,15 +365,21 @@ static int ima_release_policy(struct inode *inode, struct file *file)
clear_bit(IMA_FS_BUSY, &ima_fs_flags);
return 0;
}
+
ima_update_policy();
+#ifndef CONFIG_IMA_WRITE_POLICY
securityfs_remove(ima_policy);
ima_policy = NULL;
+#else
+ clear_bit(IMA_FS_BUSY, &ima_fs_flags);
+#endif
return 0;
}
static const struct file_operations ima_measure_policy_ops = {
.open = ima_open_policy,
.write = ima_write_policy,
+ .read = seq_read,
.release = ima_release_policy,
.llseek = generic_file_llseek,
};
@@ -382,8 +417,7 @@ int __init ima_fs_init(void)
if (IS_ERR(violations))
goto out;
- ima_policy = securityfs_create_file("policy",
- S_IWUSR,
+ ima_policy = securityfs_create_file("policy", POLICY_FILE_FLAGS,
ima_dir, NULL,
&ima_measure_policy_ops);
if (IS_ERR(ima_policy))
diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c
index e600cadd231c..bd79f254d204 100644
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -116,7 +116,7 @@ int __init ima_init(void)
if (!ima_used_chip)
pr_info("No TPM chip found, activating TPM-bypass!\n");
- rc = ima_init_keyring(INTEGRITY_KEYRING_IMA);
+ rc = integrity_init_keyring(INTEGRITY_KEYRING_IMA);
if (rc)
return rc;
diff --git a/security/integrity/ima/ima_mok.c b/security/integrity/ima/ima_mok.c
new file mode 100644
index 000000000000..16113f66378b
--- /dev/null
+++ b/security/integrity/ima/ima_mok.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2015 Juniper Networks, Inc.
+ *
+ * Author:
+ * Petko Manolov <petko.manolov@konsulko.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cred.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <keys/asymmetric-type.h>
+
+
+struct key *ima_mok_keyring;
+struct key *ima_blacklist_keyring;
+
+/*
+ * Allocate the IMA MOK and blacklist keyrings
+ */
+__init int ima_mok_init(void)
+{
+ pr_notice("Allocating IMA MOK and blacklist keyrings.\n");
+
+ ima_mok_keyring = keyring_alloc(".ima_mok",
+ KUIDT_INIT(0), KGIDT_INIT(0), current_cred(),
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ |
+ KEY_USR_WRITE | KEY_USR_SEARCH,
+ KEY_ALLOC_NOT_IN_QUOTA,
+ keyring_restrict_trusted_only, NULL);
+
+ ima_blacklist_keyring = keyring_alloc(".ima_blacklist",
+ KUIDT_INIT(0), KGIDT_INIT(0), current_cred(),
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ |
+ KEY_USR_WRITE | KEY_USR_SEARCH,
+ KEY_ALLOC_NOT_IN_QUOTA,
+ keyring_restrict_trusted_only, NULL);
+
+ if (IS_ERR(ima_mok_keyring) || IS_ERR(ima_blacklist_keyring))
+ panic("Can't allocate IMA MOK or blacklist keyrings.");
+
+ set_bit(KEY_FLAG_KEEP, &ima_blacklist_keyring->flags);
+ return 0;
+}
+
+module_init(ima_mok_init);
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 0ddc8cb6411b..f5473dbfd93d 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -16,7 +16,9 @@
#include <linux/magic.h>
#include <linux/parser.h>
#include <linux/slab.h>
+#include <linux/rculist.h>
#include <linux/genhd.h>
+#include <linux/seq_file.h>
#include "ima.h"
@@ -135,11 +137,11 @@ static struct ima_rule_entry default_appraise_rules[] = {
static LIST_HEAD(ima_default_rules);
static LIST_HEAD(ima_policy_rules);
+static LIST_HEAD(ima_temp_rules);
static struct list_head *ima_rules = &ima_default_rules;
-static DEFINE_MUTEX(ima_rules_mutex);
-
static int ima_policy __initdata;
+
static int __init default_measure_policy_setup(char *str)
{
if (ima_policy)
@@ -171,21 +173,18 @@ static int __init default_appraise_policy_setup(char *str)
__setup("ima_appraise_tcb", default_appraise_policy_setup);
/*
- * Although the IMA policy does not change, the LSM policy can be
- * reloaded, leaving the IMA LSM based rules referring to the old,
- * stale LSM policy.
- *
- * Update the IMA LSM based rules to reflect the reloaded LSM policy.
- * We assume the rules still exist; and BUG_ON() if they don't.
+ * The LSM policy can be reloaded, leaving the IMA LSM based rules referring
+ * to the old, stale LSM policy. Update the IMA LSM based rules to reflect
+ * the reloaded LSM policy. We assume the rules still exist; and BUG_ON() if
+ * they don't.
*/
static void ima_lsm_update_rules(void)
{
- struct ima_rule_entry *entry, *tmp;
+ struct ima_rule_entry *entry;
int result;
int i;
- mutex_lock(&ima_rules_mutex);
- list_for_each_entry_safe(entry, tmp, &ima_policy_rules, list) {
+ list_for_each_entry(entry, &ima_policy_rules, list) {
for (i = 0; i < MAX_LSM_RULES; i++) {
if (!entry->lsm[i].rule)
continue;
@@ -196,7 +195,6 @@ static void ima_lsm_update_rules(void)
BUG_ON(!entry->lsm[i].rule);
}
}
- mutex_unlock(&ima_rules_mutex);
}
/**
@@ -319,9 +317,9 @@ static int get_subaction(struct ima_rule_entry *rule, int func)
* Measure decision based on func/mask/fsmagic and LSM(subj/obj/type)
* conditions.
*
- * (There is no need for locking when walking the policy list,
- * as elements in the list are never deleted, nor does the list
- * change.)
+ * Since the IMA policy may be updated multiple times we need to lock the
+ * list when walking it. Reads are many orders of magnitude more numerous
+ * than writes so ima_match_policy() is classical RCU candidate.
*/
int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask,
int flags)
@@ -329,7 +327,8 @@ int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask,
struct ima_rule_entry *entry;
int action = 0, actmask = flags | (flags << 1);
- list_for_each_entry(entry, ima_rules, list) {
+ rcu_read_lock();
+ list_for_each_entry_rcu(entry, ima_rules, list) {
if (!(entry->action & actmask))
continue;
@@ -351,6 +350,7 @@ int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask,
if (!actmask)
break;
}
+ rcu_read_unlock();
return action;
}
@@ -365,7 +365,6 @@ void ima_update_policy_flag(void)
{
struct ima_rule_entry *entry;
- ima_policy_flag = 0;
list_for_each_entry(entry, ima_rules, list) {
if (entry->action & IMA_DO_MASK)
ima_policy_flag |= entry->action;
@@ -418,12 +417,36 @@ void __init ima_init_policy(void)
* ima_update_policy - update default_rules with new measure rules
*
* Called on file .release to update the default rules with a complete new
- * policy. Once updated, the policy is locked, no additional rules can be
- * added to the policy.
+ * policy. What we do here is to splice ima_policy_rules and ima_temp_rules so
+ * they make a queue. The policy may be updated multiple times and this is the
+ * RCU updater.
+ *
+ * Policy rules are never deleted so ima_policy_flag gets zeroed only once when
+ * we switch from the default policy to user defined.
*/
void ima_update_policy(void)
{
- ima_rules = &ima_policy_rules;
+ struct list_head *first, *last, *policy;
+
+ /* append current policy with the new rules */
+ first = (&ima_temp_rules)->next;
+ last = (&ima_temp_rules)->prev;
+ policy = &ima_policy_rules;
+
+ synchronize_rcu();
+
+ last->next = policy;
+ rcu_assign_pointer(list_next_rcu(policy->prev), first);
+ first->prev = policy->prev;
+ policy->prev = last;
+
+ /* prepare for the next policy rules addition */
+ INIT_LIST_HEAD(&ima_temp_rules);
+
+ if (ima_rules != policy) {
+ ima_policy_flag = 0;
+ ima_rules = policy;
+ }
ima_update_policy_flag();
}
@@ -435,8 +458,8 @@ enum {
Opt_obj_user, Opt_obj_role, Opt_obj_type,
Opt_subj_user, Opt_subj_role, Opt_subj_type,
Opt_func, Opt_mask, Opt_fsmagic,
- Opt_uid, Opt_euid, Opt_fowner,
- Opt_appraise_type, Opt_fsuuid, Opt_permit_directio
+ Opt_fsuuid, Opt_uid, Opt_euid, Opt_fowner,
+ Opt_appraise_type, Opt_permit_directio
};
static match_table_t policy_tokens = {
@@ -745,7 +768,7 @@ static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
* ima_parse_add_rule - add a rule to ima_policy_rules
* @rule - ima measurement policy rule
*
- * Uses a mutex to protect the policy list from multiple concurrent writers.
+ * Avoid locking by allowing just one writer at a time in ima_write_policy()
* Returns the length of the rule parsed, an error code on failure
*/
ssize_t ima_parse_add_rule(char *rule)
@@ -781,26 +804,229 @@ ssize_t ima_parse_add_rule(char *rule)
return result;
}
- mutex_lock(&ima_rules_mutex);
- list_add_tail(&entry->list, &ima_policy_rules);
- mutex_unlock(&ima_rules_mutex);
+ list_add_tail(&entry->list, &ima_temp_rules);
return len;
}
-/* ima_delete_rules called to cleanup invalid policy */
+/**
+ * ima_delete_rules() called to cleanup invalid in-flight policy.
+ * We don't need locking as we operate on the temp list, which is
+ * different from the active one. There is also only one user of
+ * ima_delete_rules() at a time.
+ */
void ima_delete_rules(void)
{
struct ima_rule_entry *entry, *tmp;
int i;
- mutex_lock(&ima_rules_mutex);
- list_for_each_entry_safe(entry, tmp, &ima_policy_rules, list) {
+ list_for_each_entry_safe(entry, tmp, &ima_temp_rules, list) {
for (i = 0; i < MAX_LSM_RULES; i++)
kfree(entry->lsm[i].args_p);
list_del(&entry->list);
kfree(entry);
}
- mutex_unlock(&ima_rules_mutex);
}
+
+#ifdef CONFIG_IMA_READ_POLICY
+enum {
+ mask_exec = 0, mask_write, mask_read, mask_append
+};
+
+static char *mask_tokens[] = {
+ "MAY_EXEC",
+ "MAY_WRITE",
+ "MAY_READ",
+ "MAY_APPEND"
+};
+
+enum {
+ func_file = 0, func_mmap, func_bprm,
+ func_module, func_firmware, func_post
+};
+
+static char *func_tokens[] = {
+ "FILE_CHECK",
+ "MMAP_CHECK",
+ "BPRM_CHECK",
+ "MODULE_CHECK",
+ "FIRMWARE_CHECK",
+ "POST_SETATTR"
+};
+
+void *ima_policy_start(struct seq_file *m, loff_t *pos)
+{
+ loff_t l = *pos;
+ struct ima_rule_entry *entry;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(entry, ima_rules, list) {
+ if (!l--) {
+ rcu_read_unlock();
+ return entry;
+ }
+ }
+ rcu_read_unlock();
+ return NULL;
+}
+
+void *ima_policy_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct ima_rule_entry *entry = v;
+
+ rcu_read_lock();
+ entry = list_entry_rcu(entry->list.next, struct ima_rule_entry, list);
+ rcu_read_unlock();
+ (*pos)++;
+
+ return (&entry->list == ima_rules) ? NULL : entry;
+}
+
+void ima_policy_stop(struct seq_file *m, void *v)
+{
+}
+
+#define pt(token) policy_tokens[token + Opt_err].pattern
+#define mt(token) mask_tokens[token]
+#define ft(token) func_tokens[token]
+
+int ima_policy_show(struct seq_file *m, void *v)
+{
+ struct ima_rule_entry *entry = v;
+ int i = 0;
+ char tbuf[64] = {0,};
+
+ rcu_read_lock();
+
+ if (entry->action & MEASURE)
+ seq_puts(m, pt(Opt_measure));
+ if (entry->action & DONT_MEASURE)
+ seq_puts(m, pt(Opt_dont_measure));
+ if (entry->action & APPRAISE)
+ seq_puts(m, pt(Opt_appraise));
+ if (entry->action & DONT_APPRAISE)
+ seq_puts(m, pt(Opt_dont_appraise));
+ if (entry->action & AUDIT)
+ seq_puts(m, pt(Opt_audit));
+
+ seq_puts(m, " ");
+
+ if (entry->flags & IMA_FUNC) {
+ switch (entry->func) {
+ case FILE_CHECK:
+ seq_printf(m, pt(Opt_func), ft(func_file));
+ break;
+ case MMAP_CHECK:
+ seq_printf(m, pt(Opt_func), ft(func_mmap));
+ break;
+ case BPRM_CHECK:
+ seq_printf(m, pt(Opt_func), ft(func_bprm));
+ break;
+ case MODULE_CHECK:
+ seq_printf(m, pt(Opt_func), ft(func_module));
+ break;
+ case FIRMWARE_CHECK:
+ seq_printf(m, pt(Opt_func), ft(func_firmware));
+ break;
+ case POST_SETATTR:
+ seq_printf(m, pt(Opt_func), ft(func_post));
+ break;
+ default:
+ snprintf(tbuf, sizeof(tbuf), "%d", entry->func);
+ seq_printf(m, pt(Opt_func), tbuf);
+ break;
+ }
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_MASK) {
+ if (entry->mask & MAY_EXEC)
+ seq_printf(m, pt(Opt_mask), mt(mask_exec));
+ if (entry->mask & MAY_WRITE)
+ seq_printf(m, pt(Opt_mask), mt(mask_write));
+ if (entry->mask & MAY_READ)
+ seq_printf(m, pt(Opt_mask), mt(mask_read));
+ if (entry->mask & MAY_APPEND)
+ seq_printf(m, pt(Opt_mask), mt(mask_append));
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_FSMAGIC) {
+ snprintf(tbuf, sizeof(tbuf), "0x%lx", entry->fsmagic);
+ seq_printf(m, pt(Opt_fsmagic), tbuf);
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_FSUUID) {
+ seq_puts(m, "fsuuid=");
+ for (i = 0; i < ARRAY_SIZE(entry->fsuuid); ++i) {
+ switch (i) {
+ case 4:
+ case 6:
+ case 8:
+ case 10:
+ seq_puts(m, "-");
+ }
+ seq_printf(m, "%x", entry->fsuuid[i]);
+ }
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_UID) {
+ snprintf(tbuf, sizeof(tbuf), "%d", __kuid_val(entry->uid));
+ seq_printf(m, pt(Opt_uid), tbuf);
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_EUID) {
+ snprintf(tbuf, sizeof(tbuf), "%d", __kuid_val(entry->uid));
+ seq_printf(m, pt(Opt_euid), tbuf);
+ seq_puts(m, " ");
+ }
+
+ if (entry->flags & IMA_FOWNER) {
+ snprintf(tbuf, sizeof(tbuf), "%d", __kuid_val(entry->fowner));
+ seq_printf(m, pt(Opt_fowner), tbuf);
+ seq_puts(m, " ");
+ }
+
+ for (i = 0; i < MAX_LSM_RULES; i++) {
+ if (entry->lsm[i].rule) {
+ switch (i) {
+ case LSM_OBJ_USER:
+ seq_printf(m, pt(Opt_obj_user),
+ (char *)entry->lsm[i].args_p);
+ break;
+ case LSM_OBJ_ROLE:
+ seq_printf(m, pt(Opt_obj_role),
+ (char *)entry->lsm[i].args_p);
+ break;
+ case LSM_OBJ_TYPE:
+ seq_printf(m, pt(Opt_obj_type),
+ (char *)entry->lsm[i].args_p);
+ break;
+ case LSM_SUBJ_USER:
+ seq_printf(m, pt(Opt_subj_user),
+ (char *)entry->lsm[i].args_p);
+ break;
+ case LSM_SUBJ_ROLE:
+ seq_printf(m, pt(Opt_subj_role),
+ (char *)entry->lsm[i].args_p);
+ break;
+ case LSM_SUBJ_TYPE:
+ seq_printf(m, pt(Opt_subj_type),
+ (char *)entry->lsm[i].args_p);
+ break;
+ }
+ }
+ }
+ if (entry->flags & IMA_DIGSIG_REQUIRED)
+ seq_puts(m, "appraise_type=imasig ");
+ if (entry->flags & IMA_PERMIT_DIRECTIO)
+ seq_puts(m, "permit_directio ");
+ rcu_read_unlock();
+ seq_puts(m, "\n");
+ return 0;
+}
+#endif /* CONFIG_IMA_READ_POLICY */
diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h
index 9c6168709d3b..07726a731727 100644
--- a/security/integrity/integrity.h
+++ b/security/integrity/integrity.h
@@ -125,8 +125,8 @@ int integrity_kernel_read(struct file *file, loff_t offset,
int __init integrity_read_file(const char *path, char **data);
#define INTEGRITY_KEYRING_EVM 0
-#define INTEGRITY_KEYRING_MODULE 1
-#define INTEGRITY_KEYRING_IMA 2
+#define INTEGRITY_KEYRING_IMA 1
+#define INTEGRITY_KEYRING_MODULE 2
#define INTEGRITY_KEYRING_MAX 3
#ifdef CONFIG_INTEGRITY_SIGNATURE
@@ -149,7 +149,6 @@ static inline int integrity_init_keyring(const unsigned int id)
{
return 0;
}
-
#endif /* CONFIG_INTEGRITY_SIGNATURE */
#ifdef CONFIG_INTEGRITY_ASYMMETRIC_KEYS
diff --git a/security/keys/key.c b/security/keys/key.c
index b5c8324ecf62..51af3b889da4 100644
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -201,6 +201,7 @@ serial_exists:
* @cred: The credentials specifying UID namespace.
* @perm: The permissions mask of the new key.
* @flags: Flags specifying quota properties.
+ * @restrict_link: Optional link restriction method for new keyrings.
*
* Allocate a key of the specified type with the attributes given. The key is
* returned in an uninstantiated state and the caller needs to instantiate the
@@ -223,7 +224,11 @@ serial_exists:
*/
struct key *key_alloc(struct key_type *type, const char *desc,
kuid_t uid, kgid_t gid, const struct cred *cred,
- key_perm_t perm, unsigned long flags)
+ key_perm_t perm, unsigned long flags,
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *))
{
struct key_user *user = NULL;
struct key *key;
@@ -291,11 +296,14 @@ struct key *key_alloc(struct key_type *type, const char *desc,
key->uid = uid;
key->gid = gid;
key->perm = perm;
+ key->restrict_link = restrict_link;
if (!(flags & KEY_ALLOC_NOT_IN_QUOTA))
key->flags |= 1 << KEY_FLAG_IN_QUOTA;
if (flags & KEY_ALLOC_TRUSTED)
key->flags |= 1 << KEY_FLAG_TRUSTED;
+ if (flags & KEY_ALLOC_BUILT_IN)
+ key->flags |= 1 << KEY_FLAG_BUILTIN;
if (flags & KEY_ALLOC_UID_KEYRING)
key->flags |= 1 << KEY_FLAG_UID_KEYRING;
@@ -504,6 +512,12 @@ int key_instantiate_and_link(struct key *key,
}
if (keyring) {
+ if (keyring->restrict_link) {
+ ret = keyring->restrict_link(keyring, key->type,
+ key->flags, &prep.payload);
+ if (ret < 0)
+ goto error;
+ }
ret = __key_link_begin(keyring, &key->index_key, &edit);
if (ret < 0)
goto error;
@@ -559,8 +573,12 @@ int key_reject_and_link(struct key *key,
awaken = 0;
ret = -EBUSY;
- if (keyring)
+ if (keyring) {
+ if (keyring->restrict_link)
+ return -EPERM;
+
link_ret = __key_link_begin(keyring, &key->index_key, &edit);
+ }
mutex_lock(&key_construction_mutex);
@@ -798,6 +816,10 @@ key_ref_t key_create_or_update(key_ref_t keyring_ref,
struct key *keyring, *key = NULL;
key_ref_t key_ref;
int ret;
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *) = NULL;
/* look up the key type to see if it's one of the registered kernel
* types */
@@ -816,6 +838,10 @@ key_ref_t key_create_or_update(key_ref_t keyring_ref,
key_check(keyring);
+ key_ref = ERR_PTR(-EPERM);
+ if (!(flags & KEY_ALLOC_BYPASS_RESTRICTION))
+ restrict_link = keyring->restrict_link;
+
key_ref = ERR_PTR(-ENOTDIR);
if (keyring->type != &key_type_keyring)
goto error_put_type;
@@ -840,10 +866,15 @@ key_ref_t key_create_or_update(key_ref_t keyring_ref,
}
index_key.desc_len = strlen(index_key.description);
- key_ref = ERR_PTR(-EPERM);
- if (!prep.trusted && test_bit(KEY_FLAG_TRUSTED_ONLY, &keyring->flags))
- goto error_free_prep;
- flags |= prep.trusted ? KEY_ALLOC_TRUSTED : 0;
+ if (restrict_link) {
+ unsigned long kflags = prep.trusted ? KEY_FLAG_TRUSTED : 0;
+ ret = restrict_link(keyring,
+ index_key.type, kflags, &prep.payload);
+ if (ret < 0) {
+ key_ref = ERR_PTR(ret);
+ goto error_free_prep;
+ }
+ }
ret = __key_link_begin(keyring, &index_key, &edit);
if (ret < 0) {
@@ -884,7 +915,7 @@ key_ref_t key_create_or_update(key_ref_t keyring_ref,
/* allocate a new key */
key = key_alloc(index_key.type, index_key.description,
- cred->fsuid, cred->fsgid, cred, perm, flags);
+ cred->fsuid, cred->fsgid, cred, perm, flags, NULL);
if (IS_ERR(key)) {
key_ref = ERR_CAST(key);
goto error_link_end;
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 737e60b3d4bd..ee8536f6ac80 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -486,13 +486,18 @@ static long keyring_read(const struct key *keyring,
*/
struct key *keyring_alloc(const char *description, kuid_t uid, kgid_t gid,
const struct cred *cred, key_perm_t perm,
- unsigned long flags, struct key *dest)
+ unsigned long flags,
+ int (*restrict_link)(struct key *,
+ const struct key_type *,
+ unsigned long,
+ const union key_payload *),
+ struct key *dest)
{
struct key *keyring;
int ret;
keyring = key_alloc(&key_type_keyring, description,
- uid, gid, cred, perm, flags);
+ uid, gid, cred, perm, flags, restrict_link);
if (!IS_ERR(keyring)) {
ret = key_instantiate_and_link(keyring, NULL, 0, dest, NULL);
if (ret < 0) {
@@ -505,6 +510,51 @@ struct key *keyring_alloc(const char *description, kuid_t uid, kgid_t gid,
}
EXPORT_SYMBOL(keyring_alloc);
+/**
+ * keyring_restrict_trusted_only - Restrict additions to a keyring to trusted keys only
+ * @keyring: The keyring being added to.
+ * @type: The type of key being added.
+ * @flags: The key flags.
+ * @payload: The payload of the key intended to be added.
+ *
+ * Reject the addition of any links to a keyring that point to keys that aren't
+ * marked as being trusted. It can be overridden by passing
+ * KEY_ALLOC_BYPASS_RESTRICTION to key_instantiate_and_link() when adding a key
+ * to a keyring.
+ *
+ * This is meant to be passed as the restrict_link parameter to
+ * keyring_alloc().
+ */
+int keyring_restrict_trusted_only(struct key *keyring,
+ const struct key_type *type,
+ unsigned long flags,
+ const union key_payload *payload)
+{
+ return flags & KEY_FLAG_TRUSTED ? 0 : -EPERM;
+}
+
+/**
+ * restrict_link_reject - Give -EPERM to restrict link
+ * @keyring: The keyring being added to.
+ * @type: The type of key being added.
+ * @flags: The key flags.
+ * @payload: The payload of the key intended to be added.
+ *
+ * Reject the addition of any links to a keyring. It can be overridden by
+ * passing KEY_ALLOC_BYPASS_RESTRICTION to key_instantiate_and_link() when
+ * adding a key to a keyring.
+ *
+ * This is meant to be passed as the restrict_link parameter to
+ * keyring_alloc().
+ */
+int restrict_link_reject(struct key *keyring,
+ const struct key_type *type,
+ unsigned long flags,
+ const union key_payload *payload)
+{
+ return -EPERM;
+}
+
/*
* By default, we keys found by getting an exact match on their descriptions.
*/
@@ -1189,6 +1239,17 @@ void __key_link_end(struct key *keyring,
up_write(&keyring->sem);
}
+/*
+ * Check addition of keys to restricted keyrings.
+ */
+static int __key_link_check_restriction(struct key *keyring, struct key *key)
+{
+ if (!keyring->restrict_link)
+ return 0;
+ return keyring->restrict_link(keyring,
+ key->type, key->flags, &key->payload);
+}
+
/**
* key_link - Link a key to a keyring
* @keyring: The keyring to make the link in.
@@ -1219,14 +1280,12 @@ int key_link(struct key *keyring, struct key *key)
key_check(keyring);
key_check(key);
- if (test_bit(KEY_FLAG_TRUSTED_ONLY, &keyring->flags) &&
- !test_bit(KEY_FLAG_TRUSTED, &key->flags))
- return -EPERM;
-
ret = __key_link_begin(keyring, &key->index_key, &edit);
if (ret == 0) {
kdebug("begun {%d,%d}", keyring->serial, atomic_read(&keyring->usage));
- ret = __key_link_check_live_key(keyring, key);
+ ret = __key_link_check_restriction(keyring, key);
+ if (ret == 0)
+ ret = __key_link_check_live_key(keyring, key);
if (ret == 0)
__key_link(key, &edit);
__key_link_end(keyring, &key->index_key, edit);
diff --git a/security/keys/persistent.c b/security/keys/persistent.c
index c9fae5ea89fe..2ef45b319dd9 100644
--- a/security/keys/persistent.c
+++ b/security/keys/persistent.c
@@ -26,7 +26,7 @@ static int key_create_persistent_register(struct user_namespace *ns)
current_cred(),
((KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ),
- KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ KEY_ALLOC_NOT_IN_QUOTA, NULL, NULL);
if (IS_ERR(reg))
return PTR_ERR(reg);
@@ -60,7 +60,7 @@ static key_ref_t key_create_persistent(struct user_namespace *ns, kuid_t uid,
uid, INVALID_GID, current_cred(),
((KEY_POS_ALL & ~KEY_POS_SETATTR) |
KEY_USR_VIEW | KEY_USR_READ),
- KEY_ALLOC_NOT_IN_QUOTA,
+ KEY_ALLOC_NOT_IN_QUOTA, NULL,
ns->persistent_keyring_register);
if (IS_ERR(persistent))
return ERR_CAST(persistent);
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index a7095372701e..88c94e6c2158 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -78,7 +78,7 @@ int install_user_keyrings(void)
cred, user_keyring_perm,
KEY_ALLOC_UID_KEYRING |
KEY_ALLOC_IN_QUOTA,
- NULL);
+ NULL, NULL);
if (IS_ERR(uid_keyring)) {
ret = PTR_ERR(uid_keyring);
goto error;
@@ -96,7 +96,7 @@ int install_user_keyrings(void)
cred, user_keyring_perm,
KEY_ALLOC_UID_KEYRING |
KEY_ALLOC_IN_QUOTA,
- NULL);
+ NULL, NULL);
if (IS_ERR(session_keyring)) {
ret = PTR_ERR(session_keyring);
goto error_release;
@@ -143,7 +143,8 @@ int install_thread_keyring_to_cred(struct cred *new)
keyring = keyring_alloc("_tid", new->uid, new->gid, new,
KEY_POS_ALL | KEY_USR_VIEW,
- KEY_ALLOC_QUOTA_OVERRUN, NULL);
+ KEY_ALLOC_QUOTA_OVERRUN,
+ NULL, NULL);
if (IS_ERR(keyring))
return PTR_ERR(keyring);
@@ -189,7 +190,8 @@ int install_process_keyring_to_cred(struct cred *new)
keyring = keyring_alloc("_pid", new->uid, new->gid, new,
KEY_POS_ALL | KEY_USR_VIEW,
- KEY_ALLOC_QUOTA_OVERRUN, NULL);
+ KEY_ALLOC_QUOTA_OVERRUN,
+ NULL, NULL);
if (IS_ERR(keyring))
return PTR_ERR(keyring);
@@ -242,7 +244,7 @@ int install_session_keyring_to_cred(struct cred *cred, struct key *keyring)
keyring = keyring_alloc("_ses", cred->uid, cred->gid, cred,
KEY_POS_ALL | KEY_USR_VIEW | KEY_USR_READ,
- flags, NULL);
+ flags, NULL, NULL);
if (IS_ERR(keyring))
return PTR_ERR(keyring);
} else {
@@ -799,7 +801,7 @@ long join_session_keyring(const char *name)
keyring = keyring_alloc(
name, old->uid, old->gid, old,
KEY_POS_ALL | KEY_USR_VIEW | KEY_USR_READ | KEY_USR_LINK,
- KEY_ALLOC_IN_QUOTA, NULL);
+ KEY_ALLOC_IN_QUOTA, NULL, NULL);
if (IS_ERR(keyring)) {
ret = PTR_ERR(keyring);
goto error2;
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 88172c163953..aa292e01c562 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -116,7 +116,7 @@ static int call_sbin_request_key(struct key_construction *cons,
cred = get_current_cred();
keyring = keyring_alloc(desc, cred->fsuid, cred->fsgid, cred,
KEY_POS_ALL | KEY_USR_VIEW | KEY_USR_READ,
- KEY_ALLOC_QUOTA_OVERRUN, NULL);
+ KEY_ALLOC_QUOTA_OVERRUN, NULL, NULL);
put_cred(cred);
if (IS_ERR(keyring)) {
ret = PTR_ERR(keyring);
@@ -378,7 +378,7 @@ static int construct_alloc_key(struct keyring_search_context *ctx,
key = key_alloc(ctx->index_key.type, ctx->index_key.description,
ctx->cred->fsuid, ctx->cred->fsgid, ctx->cred,
- perm, flags);
+ perm, flags, NULL);
if (IS_ERR(key))
goto alloc_failed;
diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index 976deea0569e..b47445022d5c 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -208,7 +208,7 @@ struct key *request_key_auth_new(struct key *target, const void *callout_info,
authkey = key_alloc(&key_type_request_key_auth, desc,
cred->fsuid, cred->fsgid, cred,
KEY_POS_VIEW | KEY_POS_READ | KEY_POS_SEARCH |
- KEY_USR_VIEW, KEY_ALLOC_NOT_IN_QUOTA);
+ KEY_USR_VIEW, KEY_ALLOC_NOT_IN_QUOTA, NULL);
if (IS_ERR(authkey)) {
ret = PTR_ERR(authkey);
goto error_alloc;
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 488a92224249..2995f0cda7ec 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -326,8 +326,6 @@ SND_SOC_DAPM_MUX("Out3 Mux", SND_SOC_NOPM, 0, 0,
&wm9712_out3_mux_controls),
SND_SOC_DAPM_MUX("Speaker Mux", SND_SOC_NOPM, 0, 0,
&wm9712_spk_mux_controls),
-SND_SOC_DAPM_MUX("Capture Phone Mux", SND_SOC_NOPM, 0, 0,
- &wm9712_capture_phone_mux_controls),
SND_SOC_DAPM_MUX("Left Capture Select", SND_SOC_NOPM, 0, 0,
&wm9712_capture_selectl_controls),
SND_SOC_DAPM_MUX("Right Capture Select", SND_SOC_NOPM, 0, 0,
@@ -336,8 +334,6 @@ SND_SOC_DAPM_MUX("Left Mic Select Source", SND_SOC_NOPM, 0, 0,
&wm9712_mic_src_controls),
SND_SOC_DAPM_MUX("Right Mic Select Source", SND_SOC_NOPM, 0, 0,
&wm9712_mic_src_controls),
-SND_SOC_DAPM_MUX("Differential Source", SND_SOC_NOPM, 0, 0,
- &wm9712_diff_sel_controls),
SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("Left HP Mixer", AC97_INT_PAGING, 9, 1,
&wm9712_hpl_mixer_controls[0], ARRAY_SIZE(wm9712_hpl_mixer_controls)),
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index d420995ed45b..74508964b0ae 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -15,6 +15,7 @@ config SND_SOC_FSL_ASRC
config SND_SOC_FSL_SAI
tristate "Synchronous Audio Interface (SAI) module support"
select REGMAP_MMIO
+ select SND_SOC_AC97_BUS
select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
select SND_SOC_GENERIC_DMAENGINE_PCM
help
@@ -218,6 +219,14 @@ config SND_SOC_PHYCORE_AC97
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
+config SND_SOC_FSL_SAI_WM9712
+ tristate "SoC Audio support for Freescale SoC's using SAI and WM9712 codec"
+ select SND_SOC_FSL_SAI
+ select SND_SOC_WM9712
+ help
+ Say Y or M here if you want to add support for SoC audio on Freescale
+ SoC using SAI and the WM9712 (or compatible) codec.
+
config SND_SOC_EUKREA_TLV320
tristate "Eukrea TLV320"
depends on ARCH_MXC && !ARM64 && I2C
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index d28dc25c9375..43f5da761675 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o
# Freescale SSI/DMA/SAI/SPDIF Support
snd-soc-fsl-asoc-card-objs := fsl-asoc-card.o
snd-soc-fsl-asrc-objs := fsl_asrc.o fsl_asrc_dma.o
-snd-soc-fsl-sai-objs := fsl_sai.o
+snd-soc-fsl-sai-objs := fsl_sai.o fsl_sai_clk.o fsl_sai_ac97.o
snd-soc-fsl-ssi-y := fsl_ssi.o
snd-soc-fsl-ssi-$(CONFIG_DEBUG_FS) += fsl_ssi_dbg.o
snd-soc-fsl-spdif-objs := fsl_spdif.o
@@ -60,6 +60,7 @@ snd-soc-imx-mc13783-objs := imx-mc13783.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
+obj-$(CONFIG_SND_SOC_FSL_SAI_WM9712) += fsl_sai_wm9712.o
obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index b95fbc3f68eb..8ca899dfca77 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -48,6 +48,7 @@
/* SAI Transmit/Receive Control Register */
#define FSL_SAI_CSR_TERE BIT(31)
+#define FSL_SAI_CSR_BCE BIT(28)
#define FSL_SAI_CSR_FR BIT(25)
#define FSL_SAI_CSR_SR BIT(24)
#define FSL_SAI_CSR_xF_SHIFT 16
@@ -72,7 +73,9 @@
#define FSL_SAI_CR1_RFW_MASK 0x1f
/* SAI Transmit and Receive Configuration 2 Register */
+#define FSL_SAI_CR2_SYNC_MASK (0x3 << 30)
#define FSL_SAI_CR2_SYNC BIT(30)
+#define FSL_SAI_CR2_BCS BIT(29)
#define FSL_SAI_CR2_MSEL_MASK (0x3 << 26)
#define FSL_SAI_CR2_MSEL_BUS 0
#define FSL_SAI_CR2_MSEL_MCLK1 BIT(26)
@@ -82,6 +85,7 @@
#define FSL_SAI_CR2_BCP BIT(25)
#define FSL_SAI_CR2_BCD_MSTR BIT(24)
#define FSL_SAI_CR2_DIV_MASK 0xff
+#define FSL_SAI_CR2_DIV(x) ((x) & 0xff)
/* SAI Transmit and Receive Configuration 3 Register */
#define FSL_SAI_CR3_TRCE BIT(16)
@@ -103,7 +107,7 @@
#define FSL_SAI_CR5_WNW_MASK (0x1f << 24)
#define FSL_SAI_CR5_W0W(x) (((x) - 1) << 16)
#define FSL_SAI_CR5_W0W_MASK (0x1f << 16)
-#define FSL_SAI_CR5_FBT(x) ((x) << 8)
+#define FSL_SAI_CR5_FBT(x) ((x - 1) << 8)
#define FSL_SAI_CR5_FBT_MASK (0x1f << 8)
/* SAI type */
diff --git a/sound/soc/fsl/fsl_sai_ac97.c b/sound/soc/fsl/fsl_sai_ac97.c
new file mode 100644
index 000000000000..3bd483256c62
--- /dev/null
+++ b/sound/soc/fsl/fsl_sai_ac97.c
@@ -0,0 +1,1353 @@
+/*
+ * Freescale ALSA SoC Digital Audio Interface (SAI) AC97 driver.
+ *
+ * Copyright (C) 2013-2015 Toradex, Inc.
+ * Authors: Stefan Agner, Marcel Ziswiler
+ *
+ * This program is free software, you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or(at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm_params.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+
+#include "fsl_sai.h"
+#include "imx-pcm.h"
+
+struct imx_pcm_runtime_data {
+ unsigned int period;
+ int periods;
+ unsigned long offset;
+ struct snd_pcm_substream *substream;
+};
+
+#define EDMA_PRIO_HIGH 6
+#define SAI_AC97_DMABUF_SIZE (13 * 4)
+#define SAI_AC97_RBUF_COUNT (4)
+#define SAI_AC97_RBUF_FRAMES (1024)
+#define SAI_AC97_RBUF_SIZE (SAI_AC97_RBUF_FRAMES * SAI_AC97_DMABUF_SIZE)
+#define SAI_AC97_RBUF_SIZE_TOT (SAI_AC97_RBUF_COUNT * SAI_AC97_RBUF_SIZE)
+
+static struct fsl_sai_ac97 *info;
+
+struct fsl_sai_ac97 {
+ struct platform_device *pdev;
+
+ resource_size_t mapbase;
+
+ struct regmap *regmap;
+ struct clk *bus_clk;
+ struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
+
+ struct dma_chan *dma_tx_chan;
+ struct dma_chan *dma_rx_chan;
+ struct dma_async_tx_descriptor *dma_tx_desc;
+ struct dma_async_tx_descriptor *dma_rx_desc;
+
+ dma_cookie_t dma_tx_cookie;
+ dma_cookie_t dma_rx_cookie;
+
+ struct snd_dma_buffer rx_buf;
+ struct snd_dma_buffer tx_buf;
+
+ bool big_endian_regs;
+ bool big_endian_data;
+ bool is_dsp_mode;
+ bool sai_on_imx;
+
+ struct snd_dmaengine_dai_dma_data dma_params_rx;
+ struct snd_dmaengine_dai_dma_data dma_params_tx;
+
+
+ struct snd_card *card;
+
+ struct mutex lock;
+
+ int cmdbufid;
+ unsigned short reg;
+ unsigned short val;
+
+ struct snd_soc_platform platform;
+
+ atomic_t playing;
+ atomic_t capturing;
+
+ struct imx_pcm_runtime_data *iprtd_playback;
+ struct imx_pcm_runtime_data *iprtd_capture;
+};
+
+#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
+ FSL_SAI_CSR_FEIE)
+
+
+struct ac97_tx {
+ /*
+ * Slot 0: TAG
+ * Bit 15 Codec Ready
+ * Bit 14:3 Slot Valid (Which of slot 1 to slot 12 contain valid data)
+ * Bit 2 Zero
+ * Bit 1:0 Codec ID
+ */
+ unsigned int reserved_2:4; /* Align the 16-bit Tag to 20-bit */
+ unsigned int codec_id:2;
+ unsigned int reserved_1:1;
+ unsigned int slot_valid:12;
+ unsigned int valid:1;
+ unsigned int align_32_0:12;
+
+ /*
+ * Slot 1: Command Address Port
+ * Bit(19) Read/Write command (1=read, 0=write)
+ * Bit(18:12) Control Register Index (64 16-bit locations,
+ * addressed on even byte boundaries)
+ * Bit(11:0) Reserved (Stuffed with 0’s)
+ */
+ unsigned int reserved_3:12;
+ unsigned int cmdindex:7;
+ unsigned int cmdread:1;
+ unsigned int align_32_1:12;
+
+
+ /*
+ * Slot 2: Command Data Port
+ * The command data port is used to deliver 16-bit
+ * control register write data in the event that
+ * the current command port operation is a write
+ * cycle. (as indicated by Slot 1, bit 19)
+ * Bit(19:4) Control Register Write Data (Completed
+ * with 0’s if current operation is a read)
+ * Bit(3:0) Reserved (Completed with 0’s)
+ */
+ unsigned int reserved_4:4;
+ unsigned int cmddata:16;
+ unsigned int align_32_2:12;
+
+ unsigned int slots_data[10];
+} __attribute__((__packed__));
+
+struct ac97_rx {
+ /*
+ * Slot 0: TAG
+ * Bit 15 Codec Ready
+ * Bit 14:3 Slot Valid (Which of slot 1 to slot 12 contain valid data)
+ * Bit 2:0 Zero
+ */
+ unsigned int reserved_2:4; /* Align the 16-bit Tag to 20-bit */
+ unsigned int reserved_1:3;
+ unsigned int slot_valid:12;
+ unsigned int valid:1;
+ unsigned int align_32_0:12;
+
+ /*
+ * Slot 1: Status Address
+ */
+ unsigned int reserved_4:2;
+ unsigned int slot_req:10;
+ unsigned int regindex:7;
+ unsigned int reserved_3:1;
+ unsigned int align_32_1:12;
+
+ /*
+ * Slot 2: Status Data
+ * Bit 19:4 Control Register Read Data (Completed with 0’s if tagged
+ * “invalid” by AC‘97)
+ * Bit 3:0 RESERVED (Completed with 0’s)
+ */
+ unsigned int reserved_5:4;
+ unsigned int cmddata:16;
+ unsigned int align_32_2:12;
+
+ unsigned int slots_data[10];
+} __attribute__((__packed__));
+
+static void fsl_dma_tx_complete(void *arg)
+{
+ struct fsl_sai_ac97 *sai = arg;
+ struct ac97_tx *aclink;
+ struct imx_pcm_runtime_data *iprtd = sai->iprtd_playback;
+ int i = 0;
+ struct dma_tx_state state;
+ enum dma_status status;
+ int bufid;
+
+ async_tx_ack(sai->dma_tx_desc);
+
+ status = dmaengine_tx_status(sai->dma_tx_chan, sai->dma_tx_cookie, &state);
+
+ /* Calculate the id of the running buffer */
+ if (state.residue % SAI_AC97_RBUF_SIZE == 0)
+ bufid = 4 - (state.residue / SAI_AC97_RBUF_SIZE);
+ else
+ bufid = 3 - (state.residue / SAI_AC97_RBUF_SIZE);
+
+ /* Calculate the id of the next free buffer */
+ bufid = (bufid + 1) % 4;
+
+ /* First frame of the just completed buffer... */
+ aclink = (struct ac97_tx *)(sai->tx_buf.area + (bufid * SAI_AC97_RBUF_SIZE));
+
+ if (atomic_read(&info->playing))
+ {
+ struct snd_dma_buffer *buf = &iprtd->substream->dma_buffer;
+ u16 *ptr = (u16 *)(buf->area + iprtd->offset);
+
+ /* Copy samples of the PCM stream into PCM slots 3/4 */
+ for (i = 0; i < SAI_AC97_RBUF_FRAMES; i++) {
+
+ aclink->valid = 1;
+ aclink->slot_valid |= (1 << 9 | 1 << 8);
+ aclink->slots_data[0] = ptr[i * 2];
+ aclink->slots_data[0] <<= 4;
+ aclink->slots_data[1] = ptr[i * 2 + 1];
+ aclink->slots_data[1] <<= 4;
+ aclink++;
+ }
+
+ iprtd->offset += SAI_AC97_RBUF_FRAMES * 4;
+ iprtd->offset %= (SAI_AC97_RBUF_FRAMES * 4 * SAI_AC97_RBUF_COUNT);
+ snd_pcm_period_elapsed(iprtd->substream);
+ }
+ else if (aclink->slot_valid & (1 << 9 | 1 << 8))
+ {
+ /* There is nothing playing anymore, clean the samples */
+ for (i = 0; i < SAI_AC97_RBUF_FRAMES; i++) {
+ aclink->valid = 0;
+ aclink->slot_valid &= ~(1 << 9 | 1 << 8);
+ aclink->slots_data[0] = 0;
+ aclink->slots_data[1] = 0;
+ aclink++;
+ }
+ }
+}
+
+static void fsl_dma_rx_complete(void *arg)
+{
+ struct fsl_sai_ac97 *sai = arg;
+ struct ac97_rx *aclink;
+ struct imx_pcm_runtime_data *iprtd = sai->iprtd_capture;
+ struct dma_tx_state state;
+ enum dma_status status;
+ int bufid;
+ int i;
+
+ async_tx_ack(sai->dma_rx_desc);
+
+ status = dmaengine_tx_status(sai->dma_rx_chan, sai->dma_rx_cookie, &state);
+
+ /* Calculate the id of the running buffer */
+ if (state.residue % SAI_AC97_RBUF_SIZE == 0)
+ bufid = 4 - (state.residue / SAI_AC97_RBUF_SIZE);
+ else
+ bufid = 3 - (state.residue / SAI_AC97_RBUF_SIZE);
+
+ /* Calculate the id of the last processed buffer */
+ bufid = (bufid + 3) % 4;
+
+ /* First frame of the just completed buffer... */
+ aclink = (struct ac97_rx *)(sai->rx_buf.area + (bufid * SAI_AC97_RBUF_SIZE));
+
+ if (atomic_read(&info->capturing))
+ {
+ struct snd_dma_buffer *buf = &iprtd->substream->dma_buffer;
+ u16 *ptr = (u16 *)buf->area;
+
+ /*
+ * Loop through all AC97 frames, but only some might have data:
+ * Depending on bit rate, the valid flag might not be set for
+ * all frames (see AC97 VBR specification)
+ */
+ for (i = 0; i < SAI_AC97_RBUF_FRAMES; i++, aclink++) {
+ if (!aclink->valid)
+ continue;
+
+ if (aclink->slot_valid & (1 << 9)) {
+ ptr[iprtd->offset / 2] = aclink->slots_data[0] >> 4;
+ iprtd->offset+=2;
+ }
+
+ if (aclink->slot_valid & (1 << 8)) {
+ ptr[iprtd->offset / 2] = aclink->slots_data[1] >> 4;
+ iprtd->offset+=2;
+ }
+
+ iprtd->offset %= (SAI_AC97_RBUF_FRAMES * 4 * SAI_AC97_RBUF_COUNT);
+ }
+
+ snd_pcm_period_elapsed(iprtd->substream);
+ }
+}
+
+static int vf610_sai_ac97_read_write(struct snd_ac97 *ac97, bool isread,
+ unsigned short reg, unsigned short *val)
+{
+ enum dma_status rx_status;
+ enum dma_status tx_status;
+ struct dma_tx_state tx_state;
+ struct dma_tx_state rx_state;
+ struct ac97_tx *tx_aclink;
+ struct ac97_rx *rx_aclink;
+ int rxbufidstart, txbufidstart, txbufid, rxbufid, curbufid;
+ unsigned long flags;
+ int ret = 0;
+ int rxbufmaxcheck = 10;
+ int timeout = 10;
+
+ /*
+ * We need to disable interrupts to make sure we insert the message
+ * before the next AC97 frame has been sent
+ */
+ local_irq_save(flags);
+ tx_status = dmaengine_tx_status(info->dma_tx_chan, info->dma_tx_cookie,
+ &tx_state);
+ rx_status = dmaengine_tx_status(info->dma_rx_chan, info->dma_rx_cookie,
+ &rx_state);
+
+ /* Calculate next DMA buffer sent out to the AC97 codec */
+ rxbufidstart = (SAI_AC97_RBUF_SIZE_TOT - rx_state.residue) / SAI_AC97_DMABUF_SIZE;
+ rxbufidstart %= SAI_AC97_RBUF_COUNT * SAI_AC97_RBUF_FRAMES;
+ txbufidstart = (SAI_AC97_RBUF_SIZE_TOT - tx_state.residue) / SAI_AC97_DMABUF_SIZE;
+ txbufidstart %= SAI_AC97_RBUF_COUNT * SAI_AC97_RBUF_FRAMES;
+
+ /* Safety margin, use next buffer in case current buffer is DMA'ed now */
+ txbufid = txbufidstart + 1;
+ txbufid %= SAI_AC97_RBUF_COUNT * SAI_AC97_RBUF_FRAMES;
+ tx_aclink = (struct ac97_tx *)(info->tx_buf.area + (txbufid * SAI_AC97_DMABUF_SIZE));
+
+ /* Put our request into the next AC97 frame */
+ tx_aclink->valid = 1;
+ tx_aclink->slot_valid |= (1 << 11);
+
+ tx_aclink->cmdread = isread;
+ tx_aclink->cmdindex = reg;
+
+ if (!isread) {
+ tx_aclink->slot_valid |= (1 << 10);
+ tx_aclink->cmddata = *val;
+ }
+
+ local_irq_restore(flags);
+
+ /* Wait at least until TX frame is in FIFO... */
+ if (!isread) {
+ do {
+ usleep_range(50, 200);
+ tx_status = dmaengine_tx_status(info->dma_tx_chan, info->dma_tx_cookie,
+ &tx_state);
+ curbufid = ((SAI_AC97_RBUF_SIZE_TOT - tx_state.residue) / SAI_AC97_DMABUF_SIZE);
+
+ if (likely(txbufid > txbufidstart) &&
+ (curbufid > txbufid || curbufid < txbufidstart))
+ break;
+
+ /* Wrap-around case */
+ if (unlikely(txbufid < txbufidstart) &&
+ (curbufid > txbufid && curbufid < txbufidstart))
+ break;
+ } while (--timeout);
+ ret = !timeout ? -ETIMEDOUT : 0;
+ goto clear_command;
+ }
+
+ /*
+ * Look into every frame starting at the RX frame which was
+ * last copied by DMA at command insert time. Typically, the
+ * answer is in RX start frame +4. Factors which sum up to
+ * this delay are:
+ * - TX send delay (+1 safety margin, +2 TX FIFO)
+ * - AC97 codec sends back the answer in the next frame (+1)
+ *
+ * TX ring buffer
+ * |------|------|------|------|------|------|------|------|
+ * | | | |txbuf |txbuf | | | |
+ * | | | |start | | | | |
+ * |------|------|------|------|------|------|------|------|
+ *
+ * RX ring buffer
+ * |------|------|------|------|------|------|------|------|
+ * | |rxbuf | | | |rxbuf | | |
+ * | |start | | | | | | |
+ * |------|------|------|------|------|------|------|------|
+ *
+ */
+ rxbufid = rxbufidstart;
+ curbufid = rxbufid;
+ do {
+ while (rxbufid == curbufid && --timeout)
+ {
+ /* Wait for frames being transmitted/received... */
+ usleep_range(50, 200);
+ rx_status = dmaengine_tx_status(info->dma_rx_chan, info->dma_rx_cookie,
+ &rx_state);
+ curbufid = ((SAI_AC97_RBUF_SIZE_TOT - rx_state.residue) / SAI_AC97_DMABUF_SIZE);
+ }
+
+ if (!timeout) {
+ ret = -ETIMEDOUT;
+ goto clear_command;
+ }
+
+ /* Ok, check frames... */
+ rx_aclink = (struct ac97_rx *)(info->rx_buf.area + rxbufid * SAI_AC97_DMABUF_SIZE);
+ if (rx_aclink->slot_valid & (1 << 11 | 1 << 10) &&
+ rx_aclink->regindex == reg)
+ {
+ *val = rx_aclink->cmddata;
+ break;
+ }
+
+ rxbufmaxcheck--;
+ rxbufid++;
+ rxbufid %= SAI_AC97_RBUF_COUNT * SAI_AC97_RBUF_FRAMES;
+ } while (rxbufmaxcheck);
+
+ if (!rxbufmaxcheck) {
+ pr_err("%s: rx timeout, checked buffer %d to %d, current %d\n",
+ __func__, rxbufidstart, rxbufid, curbufid);
+ ret = -ETIMEDOUT;
+ }
+
+clear_command:
+ /* Clear sent command... */
+ tx_aclink->slot_valid &= ~(1 << 11 | 1 << 10);
+ tx_aclink->cmdread = 0;
+ tx_aclink->cmdindex = 0;
+ tx_aclink->cmddata = 0;
+
+ return ret;
+}
+
+static unsigned short vf610_sai_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ unsigned short val = 0;
+ int err;
+
+ err = vf610_sai_ac97_read_write(ac97, true, reg, &val);
+ pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
+
+ if (err)
+ pr_err("failed to read register 0x%02x\n", reg);
+
+ return val;
+}
+
+static void vf610_sai_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ int err;
+
+ err = vf610_sai_ac97_read_write(ac97, false, reg, &val);
+ pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
+
+ if (err)
+ pr_err("failed to write register 0x%02x\n", reg);
+}
+
+
+static struct snd_ac97_bus_ops fsl_sai_ac97_ops = {
+ .read = vf610_sai_ac97_read,
+ .write = vf610_sai_ac97_write,
+};
+
+static int fsl_sai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ pr_debug("%s, %d\n", __func__, substream->stream);
+
+ return 0;
+}
+
+static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ pr_debug("%s, %d\n", __func__, substream->stream);
+}
+
+static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
+ //.set_sysclk = fsl_sai_set_dai_sysclk,
+ //.set_fmt = fsl_sai_set_dai_fmt,
+ //.hw_params = fsl_sai_hw_params,
+ //.trigger = fsl_sai_trigger,
+ .startup = fsl_sai_startup,
+ .shutdown = fsl_sai_shutdown,
+};
+
+static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
+{
+ struct fsl_sai_ac97 *sai = dev_get_drvdata(cpu_dai->dev);
+
+ snd_soc_dai_set_drvdata(cpu_dai, sai);
+
+ /*
+ * Mark DAI as active since we use it for AC97 control messages,
+ * otherwise snd_soc_register_card would request pinctrl state
+ * "sleep"...
+ */
+ cpu_dai->active++;
+
+ return 0;
+}
+
+static int fsl_sai_dai_remove(struct snd_soc_dai *cpu_dai)
+{
+ cpu_dai->active--;
+
+ return 0;
+}
+static struct snd_soc_dai_driver fsl_sai_ac97_dai = {
+ .name = "fsl-sai-ac97-pcm",
+ .bus_control = true,
+ .probe = fsl_sai_dai_probe,
+ .remove = fsl_sai_dai_remove,
+ .playback = {
+ .stream_name = "PCM Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "PCM Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &fsl_sai_pcm_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_component = {
+ .name = "fsl-sai",
+};
+
+static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TCSR:
+ case FSL_SAI_TCR1:
+ case FSL_SAI_TCR2:
+ case FSL_SAI_TCR3:
+ case FSL_SAI_TCR4:
+ case FSL_SAI_TCR5:
+ case FSL_SAI_TFR:
+ case FSL_SAI_TMR:
+ case FSL_SAI_RCSR:
+ case FSL_SAI_RCR1:
+ case FSL_SAI_RCR2:
+ case FSL_SAI_RCR3:
+ case FSL_SAI_RCR4:
+ case FSL_SAI_RCR5:
+ case FSL_SAI_RDR:
+ case FSL_SAI_RFR:
+ case FSL_SAI_RMR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TFR:
+ case FSL_SAI_RFR:
+ case FSL_SAI_TDR:
+ case FSL_SAI_RDR:
+ return true;
+ default:
+ return false;
+ }
+
+}
+
+static bool fsl_sai_precious_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_RDR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TCSR:
+ case FSL_SAI_TCR1:
+ case FSL_SAI_TCR2:
+ case FSL_SAI_TCR3:
+ case FSL_SAI_TCR4:
+ case FSL_SAI_TCR5:
+ case FSL_SAI_TDR:
+ case FSL_SAI_TMR:
+ case FSL_SAI_RCSR:
+ case FSL_SAI_RCR1:
+ case FSL_SAI_RCR2:
+ case FSL_SAI_RCR3:
+ case FSL_SAI_RCR4:
+ case FSL_SAI_RCR5:
+ case FSL_SAI_RMR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static struct regmap_config fsl_sai_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = FSL_SAI_RMR,
+ .precious_reg = fsl_sai_precious_reg,
+ .readable_reg = fsl_sai_readable_reg,
+ .volatile_reg = fsl_sai_volatile_reg,
+ .writeable_reg = fsl_sai_writeable_reg,
+ .cache_type = REGCACHE_FLAT,
+};
+
+static struct snd_pcm_hardware snd_sai_ac97_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .buffer_bytes_max = SAI_AC97_RBUF_FRAMES * 4 * SAI_AC97_RBUF_COUNT,
+ .period_bytes_min = SAI_AC97_RBUF_FRAMES * 4,
+ .period_bytes_max = SAI_AC97_RBUF_FRAMES * 4,
+ .periods_min = SAI_AC97_RBUF_COUNT,
+ .periods_max = SAI_AC97_RBUF_COUNT,
+ .fifo_size = 0,
+};
+
+static int snd_fsl_sai_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ iprtd->periods = params_periods(params);
+ iprtd->period = params_period_bytes(params);
+ iprtd->offset = 0;
+
+ pr_debug("%s: period %d, periods %d\n", __func__,
+ iprtd->period, iprtd->periods);
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ return 0;
+}
+
+static int snd_fsl_sai_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ pr_debug("%s:, %p, cmd %d\n", __func__, substream, cmd);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ atomic_set(&info->playing, 1);
+ else
+ atomic_set(&info->capturing, 1);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ atomic_set(&info->playing, 0);
+ else
+ atomic_set(&info->capturing, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t snd_fsl_sai_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ return bytes_to_frames(substream->runtime, iprtd->offset);
+}
+
+static int snd_fsl_sai_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret = 0;
+
+ ret = dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area, runtime->dma_addr, runtime->dma_bytes);
+
+ return ret;
+}
+
+static int snd_fsl_sai_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ pr_debug("%s, %p\n", __func__, substream);
+ return 0;
+}
+
+static int snd_fsl_sai_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd;
+ int ret;
+
+ iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+
+ if (iprtd == NULL)
+ return -ENOMEM;
+
+ runtime->private_data = iprtd;
+ iprtd->substream = substream;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ kfree(iprtd);
+ return ret;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ atomic_set(&info->playing, 0);
+ info->iprtd_playback = iprtd;
+ } else {
+ atomic_set(&info->capturing, 0);
+ info->iprtd_capture = iprtd;
+ }
+
+ snd_soc_set_runtime_hwparams(substream, &snd_sai_ac97_hardware);
+
+ return 0;
+}
+
+static int snd_fsl_sai_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ info->iprtd_playback = NULL;
+ else
+ info->iprtd_capture = NULL;
+
+ kfree(iprtd);
+
+ return 0;
+}
+
+static struct snd_pcm_ops fsl_sai_pcm_ops = {
+ .open = snd_fsl_sai_open,
+ .close = snd_fsl_sai_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_fsl_sai_pcm_hw_params,
+ .prepare = snd_fsl_sai_pcm_prepare,
+ .trigger = snd_fsl_sai_pcm_trigger,
+ .pointer = snd_fsl_sai_pcm_pointer,
+ .mmap = snd_fsl_sai_pcm_mmap,
+};
+
+static int imx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+
+ /* Allocate for buffers, 16-Bit stereo data.. */
+ size_t size = SAI_AC97_RBUF_FRAMES * 4 * SAI_AC97_RBUF_COUNT;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area)
+ return -ENOMEM;
+ buf->bytes = size;
+
+ return 0;
+}
+
+static int fsl_sai_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_pcm *pcm = rtd->pcm;
+ struct snd_card *card = rtd->card->snd_card;
+ int ret;
+
+ ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+ ret = imx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ return ret;
+ }
+
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+ ret = imx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ return ret;
+ }
+
+ pr_debug("%s, %p\n", __func__, pcm);
+
+ return 0;
+}
+
+static void fsl_sai_pcm_free(struct snd_pcm *pcm)
+{
+ pr_debug("%s, %p\n", __func__, pcm);
+}
+
+static struct snd_soc_platform_driver ac97_software_pcm_platform = {
+ .ops = &fsl_sai_pcm_ops,
+ .pcm_new = fsl_sai_pcm_new,
+ .pcm_free = fsl_sai_pcm_free,
+};
+
+
+static int fsl_sai_ac97_prepare_tx_dma(struct fsl_sai_ac97 *sai)
+{
+ struct dma_slave_config dma_tx_sconfig;
+ int ret;
+
+ dma_tx_sconfig.dst_addr = sai->mapbase + FSL_SAI_TDR;
+ dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_tx_sconfig.dst_maxburst = 13;
+ dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(sai->dma_tx_chan, &dma_tx_sconfig);
+ if (ret < 0) {
+ dev_err(&sai->pdev->dev,
+ "DMA slave config failed, err = %d\n", ret);
+ dma_release_channel(sai->dma_tx_chan);
+ return ret;
+ }
+ sai->dma_tx_desc = dmaengine_prep_dma_cyclic(sai->dma_tx_chan,
+ sai->tx_buf.addr, SAI_AC97_RBUF_SIZE_TOT,
+ SAI_AC97_RBUF_SIZE, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT);
+ sai->dma_tx_desc->callback = fsl_dma_tx_complete;
+ sai->dma_tx_desc->callback_param = sai;
+
+ return 0;
+};
+
+static int fsl_sai_ac97_prepare_rx_dma(struct fsl_sai_ac97 *sai)
+{
+ struct dma_slave_config dma_rx_sconfig;
+ int ret;
+
+ dma_rx_sconfig.src_addr = sai->mapbase + FSL_SAI_RDR;
+ dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_rx_sconfig.src_maxburst = 13;
+ dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(sai->dma_rx_chan, &dma_rx_sconfig);
+ if (ret < 0) {
+ dev_err(&sai->pdev->dev,
+ "DMA slave config failed, err = %d\n", ret);
+ dma_release_channel(sai->dma_rx_chan);
+ return ret;
+ }
+ sai->dma_rx_desc = dmaengine_prep_dma_cyclic(sai->dma_rx_chan,
+ sai->rx_buf.addr, SAI_AC97_RBUF_SIZE_TOT,
+ SAI_AC97_RBUF_SIZE, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ sai->dma_rx_desc->callback = fsl_dma_rx_complete;
+ sai->dma_rx_desc->callback_param = sai;
+
+ return 0;
+};
+
+static void fsl_sai_ac97_reset_sai(struct fsl_sai_ac97 *sai)
+{
+ /* TX */
+ /* Issue software reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR,
+ FSL_SAI_CSR_SR);
+
+ udelay(2);
+ /* Release software reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR, 0);
+
+ /* FIFO reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_FR,
+ FSL_SAI_CSR_FR);
+
+ /* RX */
+ /* Issue software reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR,
+ FSL_SAI_CSR_SR);
+
+ udelay(2);
+ /* Release software reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR, 0);
+
+ /* FIFO reset */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_FR,
+ FSL_SAI_CSR_FR);
+};
+
+static int fsl_sai_ac97_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_sai_ac97 *sai;
+ struct resource *res;
+ void __iomem *base;
+ char tmp[8];
+ int ret, i;
+
+ sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
+ if (!sai)
+ return -ENOMEM;
+
+ info = sai;
+ sai->pdev = pdev;
+
+ if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
+ sai->sai_on_imx = true;
+
+ sai->big_endian_regs = of_property_read_bool(np, "big-endian-regs");
+ if (sai->big_endian_regs)
+ fsl_sai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
+
+ sai->big_endian_data = of_property_read_bool(np, "big-endian-data");
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sai->mapbase = res->start;
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+ "bus", base, &fsl_sai_regmap_config);
+
+ /* Compatible with old DTB cases */
+ if (IS_ERR(sai->regmap))
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+ "sai", base, &fsl_sai_regmap_config);
+ if (IS_ERR(sai->regmap)) {
+ dev_err(&pdev->dev, "regmap init failed\n");
+ return PTR_ERR(sai->regmap);
+ }
+
+ /* No error out for old DTB cases but only mark the clock NULL */
+ sai->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(sai->bus_clk)) {
+ dev_err(&pdev->dev, "failed to get bus clock: %ld\n",
+ PTR_ERR(sai->bus_clk));
+ sai->bus_clk = NULL;
+ }
+
+ ret = clk_prepare_enable(sai->bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ sai->mclk_clk[0] = sai->bus_clk;
+ for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
+ sprintf(tmp, "mclk%d", i);
+ sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
+ if (IS_ERR(sai->mclk_clk[i])) {
+ dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n",
+ i, PTR_ERR(sai->mclk_clk[i]));
+ sai->mclk_clk[i] = NULL;
+ }
+ }
+
+ ret = snd_soc_set_ac97_ops_of_reset(&fsl_sai_ac97_ops, pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to reset AC97 link: %d\n", ret);
+ goto err_disable_clock;
+ }
+
+ mutex_init(&info->lock);
+
+ /* clear transmit/receive configuration/status registers */
+ regmap_write(sai->regmap, FSL_SAI_TCSR, 0x0);
+ regmap_write(sai->regmap, FSL_SAI_RCSR, 0x0);
+
+ /* pre allocate DMA buffers */
+ sai->tx_buf.dev.type = SNDRV_DMA_TYPE_DEV;
+ sai->tx_buf.dev.dev = &pdev->dev;
+ sai->tx_buf.private_data = NULL;
+ sai->tx_buf.area = dma_alloc_writecombine(&pdev->dev, SAI_AC97_RBUF_SIZE_TOT,
+ &sai->tx_buf.addr, GFP_KERNEL);
+ if (!sai->tx_buf.area) {
+ ret = -ENOMEM;
+ //goto failed_tx_buf;
+ return ret;
+ }
+ sai->tx_buf.bytes = SAI_AC97_RBUF_SIZE_TOT;
+
+ sai->rx_buf.dev.type = SNDRV_DMA_TYPE_DEV;
+ sai->rx_buf.dev.dev = &pdev->dev;
+ sai->rx_buf.private_data = NULL;
+ sai->rx_buf.area = dma_alloc_writecombine(&pdev->dev, SAI_AC97_RBUF_SIZE_TOT,
+ &sai->rx_buf.addr, GFP_KERNEL);
+ if (!sai->rx_buf.area) {
+ ret = -ENOMEM;
+ //goto failed_rx_buf;
+ return ret;
+ }
+ sai->rx_buf.bytes = SAI_AC97_RBUF_SIZE_TOT;
+
+ memset(sai->tx_buf.area, 0, SAI_AC97_RBUF_SIZE_TOT);
+ memset(sai->rx_buf.area, 0, SAI_AC97_RBUF_SIZE_TOT);
+
+ /* 1. Configuration of SAI clock mode */
+
+ /*
+ * Issue software reset and FIFO reset for Transmitter and Receiver
+ * sections before starting configuration.
+ */
+ fsl_sai_ac97_reset_sai(sai);
+
+ /* Configure FIFO watermark. FIFO watermark is used as an indicator for
+ DMA trigger when read or write data from/to FIFOs. */
+ /* Watermark level for all enabled transmit channels of one SAI module.
+ */
+ regmap_write(sai->regmap, FSL_SAI_TCR1, 13);
+ regmap_write(sai->regmap, FSL_SAI_RCR1, 13);
+
+ /* Configure the clocking mode, bitclock polarity, direction, and
+ divider. Clocking mode defines synchronous or asynchronous operation
+ for SAI module. Bitclock polarity configures polarity of the
+ bitclock. Bitclock direction configures direction of the bitclock.
+ Bus master has bitclock generated externally, slave has bitclock
+ generated internally */
+
+ /* TX */
+ /* The transmitter must be configured for asynchronous operation */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC_MASK, 0);
+
+ /* bit clock not swapped */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_BCS, 0);
+
+ /* Bitclock is active high (drive outputs on rising edge and sample
+ * inputs on falling edge
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_BCP, 0);
+
+ /* Bitclock is generated externally (Slave mode) */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_BCD_MSTR, 0);
+
+ /* RX */
+ /* The receiver must be configured for synchronous operation. */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC_MASK,
+ FSL_SAI_CR2_SYNC);
+
+ /* bit clock not swapped */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_BCS, 0);
+
+ /* Bitclock is active high (drive outputs on rising edge and sample
+ * inputs on falling edge
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_BCP, 0);
+
+ /* Bitclock is generated externally (Slave mode) */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_BCD_MSTR, 0);
+
+ /* Configure frame size, frame sync width, MSB first, frame sync early,
+ polarity, and direction
+ Frame size – configures the number of words in each frame. AC97
+ requires 13 words per frame.
+ Frame sync width – configures the length of the frame sync in number
+ of bitclock. The sync width cannot be longer than the first word of
+ the frame. AC97 requires frame sync asserted for first word. */
+
+ /* Configures number of words in each frame. The value written should be
+ * one less than the number of words in the frame (part of define!)
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_FRSZ_MASK,
+ FSL_SAI_CR4_FRSZ(13));
+
+ /* Configures length of the frame sync. The value written should be one
+ * less than the number of bitclocks.
+ * AC97 - 16 bits transmitted in first word.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_SYWD_MASK,
+ FSL_SAI_CR4_SYWD(16));
+
+
+ /* MSB is transmitted first */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_MF,
+ FSL_SAI_CR4_MF);
+
+ /* Frame sync asserted one bit before the first bit of the frame */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_FSE,
+ FSL_SAI_CR4_FSE);
+
+ /* A new AC-link input frame begins with a low to high transition of
+ * SYNC. Frame sync is active high
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_FSP, 0);
+
+ /* Frame sync is generated internally (Master mode) */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR4, FSL_SAI_CR4_FSD_MSTR,
+ FSL_SAI_CR4_FSD_MSTR);
+
+ /* RX */
+ /* Configures number of words in each frame. The value written should be
+ * one less than the number of words in the frame (part of define!)
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_FRSZ_MASK,
+ FSL_SAI_CR4_FRSZ(13));
+
+ /* Configures length of the frame sync. The value written should be one
+ * less than the number of bitclocks.
+ * AC97 - 16 bits transmitted in first word.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_SYWD_MASK,
+ FSL_SAI_CR4_SYWD(16));
+
+
+ /* MSB is transmitted first */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_MF,
+ FSL_SAI_CR4_MF);
+
+ /* Frame sync asserted one bit before the first bit of the frame */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_FSE,
+ FSL_SAI_CR4_FSE);
+
+ /* A new AC-link input frame begins with a low to high transition of
+ * SYNC. Frame sync is active high
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_FSP, 0);
+
+ /* Frame sync is generated internally (Master mode) */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR4, FSL_SAI_CR4_FSD_MSTR,
+ FSL_SAI_CR4_FSD_MSTR);
+
+ /* Configure the Word 0 and next word sizes.
+ W0W – defines number of bits in the first word in each frame.
+ WNW – defines number of bits in each word for each word except the
+ first in the frame. */
+
+ /* TX */
+ /* Number of bits in first word in each frame. AC97 – 16-bit word is
+ * transmitted.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR5, FSL_SAI_CR5_W0W_MASK,
+ FSL_SAI_CR5_W0W(16));
+
+ /* Number of bits in each word in each frame. AC97 – 20-bit word is
+ * transmitted.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR5, FSL_SAI_CR5_WNW_MASK,
+ FSL_SAI_CR5_WNW(20));
+
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR5, FSL_SAI_CR5_W0W_MASK,
+ FSL_SAI_CR5_W0W(16));
+
+ /* Configures the bit index for the first bit transmitted for each word
+ * in the frame. The value written must be greater than or equal to the
+ * word width when configured for MSB First.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR5, FSL_SAI_CR5_FBT_MASK,
+ FSL_SAI_CR5_FBT(20));
+
+ /* RX */
+ /* Number of bits in first word in each frame. AC97 – 16-bit word is
+ * transmitted.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR5, FSL_SAI_CR5_W0W_MASK,
+ FSL_SAI_CR5_W0W(16));
+
+ /* Number of bits in each word in each frame. AC97 – 20-bit word is
+ * transmitted.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR5, FSL_SAI_CR5_WNW_MASK,
+ FSL_SAI_CR5_WNW(20));
+
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR5, FSL_SAI_CR5_W0W_MASK,
+ FSL_SAI_CR5_W0W(16));
+
+ /* Configures the bit index for the first bit transmitted for each word
+ * in the frame. The value written must be greater than or equal to the
+ * word width when configured for MSB First.
+ */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR5, FSL_SAI_CR5_FBT_MASK,
+ FSL_SAI_CR5_FBT(20));
+
+
+ /* Clear the Transmit and Receive Mask registers. */
+ regmap_write(sai->regmap, FSL_SAI_TMR, 0);
+ regmap_write(sai->regmap, FSL_SAI_RMR, 0);
+
+
+ sai->dma_tx_chan = dma_request_slave_channel(&pdev->dev, "tx");
+ if (!sai->dma_tx_chan) {
+ dev_err(&pdev->dev, "DMA tx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ sai->dma_rx_chan = dma_request_slave_channel(&pdev->dev, "rx");
+ if (!sai->dma_rx_chan) {
+ dev_err(&pdev->dev, "DMA rx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ /* Enables a data channel for a transmit operation. */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR3, FSL_SAI_CR3_TRCE,
+ FSL_SAI_CR3_TRCE);
+
+ /* Enables a data channel for a receive operation. */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCR3, FSL_SAI_CR3_TRCE,
+ FSL_SAI_CR3_TRCE);
+
+
+ /* In synchronous mode, receiver is enabled only when both transmitter
+ and receiver are enabled. It is recommended that transmitter is
+ enabled last and disabled first. */
+ /* Enable receiver */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE);
+
+ /* Enable transmitter */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE);
+
+ platform_set_drvdata(pdev, sai);
+
+ ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
+ &fsl_sai_ac97_dai, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register Component: %d\n", ret);
+ goto err_disable_clock;
+ }
+
+ /* Register our own PCM device, which fills the AC97 frames... */
+ snd_soc_add_platform(&pdev->dev, &sai->platform, &ac97_software_pcm_platform);
+
+ /* Start the DMA engine */
+ fsl_sai_ac97_prepare_tx_dma(sai);
+ fsl_sai_ac97_prepare_rx_dma(sai);
+
+ sai->dma_tx_cookie = dmaengine_submit(sai->dma_tx_desc);
+ dma_async_issue_pending(sai->dma_tx_chan);
+
+ sai->dma_rx_cookie = dmaengine_submit(sai->dma_rx_desc);
+ dma_async_issue_pending(sai->dma_rx_chan);
+
+ return 0;
+
+err_disable_clock:
+ clk_disable_unprepare(sai->bus_clk);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fsl_sai_ac97_suspend(struct device *dev)
+{
+ struct fsl_sai_ac97 *sai = dev_get_drvdata(dev);
+
+ /* Disable receiver/transmitter */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE, 0x0);
+
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE, 0x0);
+
+ dmaengine_terminate_all(sai->dma_tx_chan);
+ dmaengine_terminate_all(sai->dma_rx_chan);
+
+ regcache_cache_only(sai->regmap, true);
+
+ return 0;
+}
+
+static int fsl_sai_ac97_resume(struct device *dev)
+{
+ struct fsl_sai_ac97 *sai = dev_get_drvdata(dev);
+
+ regcache_mark_dirty(sai->regmap);
+ regcache_cache_only(sai->regmap, false);
+ regcache_sync(sai->regmap);
+
+ /* Reset SAI */
+ fsl_sai_ac97_reset_sai(sai);
+
+ /* Enable receiver */
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE);
+
+ /* Enable transmitter */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE,
+ FSL_SAI_CSR_FRDE | FSL_SAI_CSR_TERE);
+
+ /* Restart the DMA engine */
+ fsl_sai_ac97_prepare_tx_dma(sai);
+ fsl_sai_ac97_prepare_rx_dma(sai);
+
+ sai->dma_tx_cookie = dmaengine_submit(sai->dma_tx_desc);
+ dma_async_issue_pending(sai->dma_tx_chan);
+
+ sai->dma_rx_cookie = dmaengine_submit(sai->dma_rx_desc);
+ dma_async_issue_pending(sai->dma_rx_chan);
+
+ return 0;
+}
+#else
+#define fsl_sai_ac97_suspend NULL
+#define fsl_sai_ac97_resume NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops fsl_sai_ac97_pm = {
+ .suspend = fsl_sai_ac97_suspend,
+ .resume = fsl_sai_ac97_resume,
+};
+static const struct of_device_id fsl_sai_ac97_ids[] = {
+ { .compatible = "fsl,vf610-sai-ac97", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver fsl_sai_ac97_driver = {
+ .probe = fsl_sai_ac97_probe,
+ .driver = {
+ .name = "fsl-sai-ac97",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_sai_ac97_ids,
+ .pm = &fsl_sai_ac97_pm,
+ },
+};
+module_platform_driver(fsl_sai_ac97_driver);
+
+MODULE_DESCRIPTION("Freescale SoC SAI AC97 Interface");
+MODULE_AUTHOR("Stefan Agner, Marcel Ziswiler");
+MODULE_ALIAS("platform:fsl-sai-ac97");
+MODULE_LICENSE("GPLv2");
diff --git a/sound/soc/fsl/fsl_sai_clk.c b/sound/soc/fsl/fsl_sai_clk.c
new file mode 100644
index 000000000000..1d0b4cb5f126
--- /dev/null
+++ b/sound/soc/fsl/fsl_sai_clk.c
@@ -0,0 +1,260 @@
+/*
+ * Freescale SAI driver to use SAI as a clock source
+ *
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ * Copyright 2015-2016 Toradex AG
+ *
+ * This program is free software, you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or(at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm_params.h>
+
+#include "fsl_sai.h"
+
+static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TCSR:
+ case FSL_SAI_TCR1:
+ case FSL_SAI_TCR2:
+ case FSL_SAI_TCR3:
+ case FSL_SAI_TCR4:
+ case FSL_SAI_TCR5:
+ case FSL_SAI_TFR:
+ case FSL_SAI_TMR:
+ case FSL_SAI_RCSR:
+ case FSL_SAI_RCR1:
+ case FSL_SAI_RCR2:
+ case FSL_SAI_RCR3:
+ case FSL_SAI_RCR4:
+ case FSL_SAI_RCR5:
+ case FSL_SAI_RDR:
+ case FSL_SAI_RFR:
+ case FSL_SAI_RMR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TFR:
+ case FSL_SAI_RFR:
+ case FSL_SAI_TDR:
+ case FSL_SAI_RDR:
+ return true;
+ default:
+ return false;
+ }
+
+}
+
+static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case FSL_SAI_TCSR:
+ case FSL_SAI_TCR1:
+ case FSL_SAI_TCR2:
+ case FSL_SAI_TCR3:
+ case FSL_SAI_TCR4:
+ case FSL_SAI_TCR5:
+ case FSL_SAI_TDR:
+ case FSL_SAI_TMR:
+ case FSL_SAI_RCSR:
+ case FSL_SAI_RCR1:
+ case FSL_SAI_RCR2:
+ case FSL_SAI_RCR3:
+ case FSL_SAI_RCR4:
+ case FSL_SAI_RCR5:
+ case FSL_SAI_RMR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static struct regmap_config fsl_sai_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = FSL_SAI_RMR,
+ .readable_reg = fsl_sai_readable_reg,
+ .volatile_reg = fsl_sai_volatile_reg,
+ .writeable_reg = fsl_sai_writeable_reg,
+ .cache_type = REGCACHE_FLAT,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int fsl_sai_clk_suspend(struct device *dev)
+{
+ struct fsl_sai *sai = dev_get_drvdata(dev);
+
+ /* disable AC97 master clock */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_BCE, 0);
+
+ regcache_cache_only(sai->regmap, true);
+
+ clk_disable_unprepare(sai->mclk_clk[1]);
+ clk_disable_unprepare(sai->bus_clk);
+
+ return 0;
+}
+
+static int fsl_sai_clk_resume(struct device *dev)
+{
+ struct fsl_sai *sai = dev_get_drvdata(dev);
+
+ clk_prepare_enable(sai->bus_clk);
+ clk_prepare_enable(sai->mclk_clk[1]);
+
+ regcache_mark_dirty(sai->regmap);
+ regcache_cache_only(sai->regmap, false);
+ regcache_sync(sai->regmap);
+
+ /* enable AC97 master clock */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_BCE,
+ FSL_SAI_CSR_BCE);
+
+ return 0;
+}
+#else
+#define fsl_sai_clk_suspend NULL
+#define fsl_sai_clk_resume NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops fsl_sai_clk_pm = {
+ .suspend_late = fsl_sai_clk_suspend,
+ .resume_early = fsl_sai_clk_resume,
+};
+
+static int fsl_sai_clk_probe(struct platform_device *pdev)
+{
+ struct fsl_sai *sai;
+ struct resource *res;
+ void __iomem *base;
+ char tmp[8];
+ int ret;
+ int i;
+
+ sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
+ if (!sai)
+ return -ENOMEM;
+
+ sai->pdev = pdev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+ "bus", base, &fsl_sai_regmap_config);
+
+ /* Compatible with old DTB cases */
+ if (IS_ERR(sai->regmap))
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+ "sai", base, &fsl_sai_regmap_config);
+ if (IS_ERR(sai->regmap)) {
+ dev_err(&pdev->dev, "regmap init failed\n");
+ return PTR_ERR(sai->regmap);
+ }
+
+ /* No error out for old DTB cases but only mark the clock NULL */
+ sai->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(sai->bus_clk)) {
+ dev_err(&pdev->dev, "failed to get bus clock: %ld\n",
+ PTR_ERR(sai->bus_clk));
+ sai->bus_clk = NULL;
+ }
+
+ sai->mclk_clk[0] = sai->bus_clk;
+ for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
+ sprintf(tmp, "mclk%d", i);
+ sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
+ if (IS_ERR(sai->mclk_clk[i])) {
+ dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n",
+ i, PTR_ERR(sai->mclk_clk[i]));
+ sai->mclk_clk[i] = NULL;
+ }
+ }
+
+ ret = clk_prepare_enable(sai->bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ /* configure AC97 master clock */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
+ ~FSL_SAI_CR2_SYNC);
+
+
+ /* asynchronous aka independent operation */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC_MASK, 0);
+
+ /* Bit clock not swapped */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_BCS, 0);
+
+ /* Clock selected by CCM_CSCMR1[SAIn_CLK_SEL] */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_MSEL_MASK,
+ FSL_SAI_CR2_MSEL_MCLK1);
+
+ /* Bitclock is generated internally (master mode) */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_BCD_MSTR,
+ FSL_SAI_CR2_BCD_MSTR);
+
+ /* Divide by 6 */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_DIV_MASK,
+ FSL_SAI_CR2_DIV(2));
+
+ ret = clk_prepare_enable(sai->mclk_clk[1]);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable mclk1: %d\n", ret);
+ return ret;
+ }
+
+ /* enable AC97 master clock */
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_BCE,
+ FSL_SAI_CSR_BCE);
+
+ platform_set_drvdata(pdev, sai);
+
+ return 0;
+}
+
+static const struct of_device_id fsl_sai_ids[] = {
+ { .compatible = "fsl,vf610-sai-clk", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver fsl_sai_driver = {
+ .probe = fsl_sai_clk_probe,
+ .driver = {
+ .name = "fsl-sai-clk",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_sai_ids,
+ .pm = &fsl_sai_clk_pm,
+ },
+};
+module_platform_driver(fsl_sai_driver);
+
+MODULE_DESCRIPTION("Freescale SoC SAI as clock generator");
+MODULE_AUTHOR("Stefan Agner, <stefan.agner@toradex.com>");
+MODULE_ALIAS("platform:fsl-sai-clk");
+MODULE_LICENSE("GPLv2");
diff --git a/sound/soc/fsl/fsl_sai_wm9712.c b/sound/soc/fsl/fsl_sai_wm9712.c
new file mode 100644
index 000000000000..617c5ab45f64
--- /dev/null
+++ b/sound/soc/fsl/fsl_sai_wm9712.c
@@ -0,0 +1,130 @@
+/*
+ * fsl_sai_wm9712.c -- SoC audio for Freescale SAI
+ *
+ * Copyright 2014 Stefan Agner, Toradex AG <stefan@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#define DRV_NAME "fsl-sai-ac97-dt-driver"
+
+static struct snd_soc_dai_link fsl_sai_wm9712_dai = {
+ .name = "AC97 HiFi",
+ .stream_name = "AC97 HiFi",
+ .codec_dai_name = "wm9712-hifi",
+ .codec_name = "wm9712-codec",
+};
+
+static const struct snd_soc_dapm_widget tegra_wm9712_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_LINE("LineIn", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+};
+
+
+static struct snd_soc_card snd_soc_card_fsl_sai_wm9712 = {
+ .name = "Colibri VF61 AC97 Audio",
+ .owner = THIS_MODULE,
+ .dai_link = &fsl_sai_wm9712_dai,
+ .num_links = 1,
+
+ .dapm_widgets = tegra_wm9712_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tegra_wm9712_dapm_widgets),
+ .fully_routed = true,
+};
+
+static struct platform_device *codec;
+
+static int fsl_sai_wm9712_driver_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct snd_soc_card *card = &snd_soc_card_fsl_sai_wm9712;
+ int ret;
+
+ card->dev = &pdev->dev;
+ platform_set_drvdata(pdev, card);
+
+ codec = platform_device_alloc("wm9712-codec", -1);
+ if (!codec)
+ return -ENOMEM;
+
+ ret = platform_device_add(codec);
+ if (ret)
+ goto codec_put;
+
+ ret = snd_soc_of_parse_card_name(card, "fsl,model");
+ if (ret)
+ goto codec_unregister;
+
+ ret = snd_soc_of_parse_audio_routing(card, "fsl,audio-routing");
+ if (ret)
+ goto codec_unregister;
+
+ fsl_sai_wm9712_dai.cpu_of_node = of_parse_phandle(np,
+ "fsl,ac97-controller", 0);
+ if (!fsl_sai_wm9712_dai.cpu_of_node) {
+ dev_err(&pdev->dev,
+ "Property 'fsl,ac97-controller' missing or invalid\n");
+ ret = -EINVAL;
+ goto codec_unregister;
+ }
+
+ fsl_sai_wm9712_dai.platform_of_node = fsl_sai_wm9712_dai.cpu_of_node;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
+ ret);
+ goto codec_unregister;
+ }
+
+ return 0;
+
+codec_unregister:
+ platform_device_del(codec);
+
+codec_put:
+ platform_device_put(codec);
+ return ret;
+}
+
+static int fsl_sai_wm9712_driver_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+
+ platform_device_unregister(codec);
+
+ return 0;
+}
+
+static const struct of_device_id fsl_sai_wm9712_of_match[] = {
+ { .compatible = "fsl,fsl-sai-audio-wm9712", },
+ {},
+};
+
+static struct platform_driver fsl_sai_wm9712_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ .of_match_table = fsl_sai_wm9712_of_match,
+ },
+ .probe = fsl_sai_wm9712_driver_probe,
+ .remove = fsl_sai_wm9712_driver_remove,
+};
+module_platform_driver(fsl_sai_wm9712_driver);
+
+/* Module information */
+MODULE_AUTHOR("Stefan Agner <stefan@agner.ch>");
+MODULE_DESCRIPTION("ALSA SoC Freescale SAI+WM9712");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, fsl_sai_wm9712_of_match);