summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS9
-rw-r--r--arch/arm/mach-vexpress/tc2_pm.c2
-rw-r--r--drivers/cpuidle/Kconfig.arm10
-rw-r--r--drivers/cpuidle/Makefile1
-rw-r--r--drivers/cpuidle/cpuidle-big_little.c209
-rw-r--r--drivers/irqchip/irq-gic.c6
-rw-r--r--include/linux/irqchip/arm-gic.h1
7 files changed, 238 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 233ddce8eeff..7a78b9f2aae2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2307,6 +2307,15 @@ F: drivers/cpufreq/arm_big_little.h
F: drivers/cpufreq/arm_big_little.c
F: drivers/cpufreq/arm_big_little_dt.c
+CPUIDLE DRIVER - ARM BIG LITTLE
+M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M: Daniel Lezcano <daniel.lezcano@linaro.org>
+L: linux-pm@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org
+T: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S: Maintained
+F: drivers/cpuidle/cpuidle-big_little.c
+
CPUIDLE DRIVERS
M: Rafael J. Wysocki <rjw@sisk.pl>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 2b7c93a724ed..7aeb5d60e484 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -18,6 +18,7 @@
#include <linux/of_address.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/mcpm.h>
#include <asm/proc-fns.h>
@@ -230,6 +231,7 @@ static void tc2_pm_suspend(u64 residency)
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+ gic_cpu_if_down();
tc2_pm_down(residency);
}
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index b3302193c15a..8e3660322308 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -27,3 +27,13 @@ config ARM_U8500_CPUIDLE
help
Select this to enable cpuidle for ST-E u8500 processors
+config CPU_IDLE_BIG_LITTLE
+ bool "Support for ARM big.LITTLE processors"
+ depends on ARCH_VEXPRESS_TC2_PM
+ select ARM_CPU_SUSPEND
+ select CPU_IDLE_MULTIPLE_DRIVERS
+ help
+ Select this option to enable CPU idle driver for big.LITTLE based
+ ARM systems. Driver manages CPUs coordination through MCPM and
+ define different C-states for little and big cores through the
+ multiple CPU idle drivers infrastructure.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 0b9d200c7e45..cea5ef58876d 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o
+obj-$(CONFIG_CPU_IDLE_BIG_LITTLE) += cpuidle-big_little.o
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
new file mode 100644
index 000000000000..b45fc6249041
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2013 ARM/Linaro
+ *
+ * Authors: Daniel Lezcano <daniel.lezcano@linaro.org>
+ * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ * Nicolas Pitre <nicolas.pitre@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpuidle.h>
+#include <asm/mcpm.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx);
+
+/*
+ * NB: Owing to current menu governor behaviour big and LITTLE
+ * index 1 states have to define exit_latency and target_residency for
+ * cluster state since, when all CPUs in a cluster hit it, the cluster
+ * can be shutdown. This means that when a single CPU enters this state
+ * the exit_latency and target_residency values are somewhat overkill.
+ * There is no notion of cluster states in the menu governor, so CPUs
+ * have to define CPU states where possibly the cluster will be shutdown
+ * depending on the state of other CPUs. idle states entry and exit happen
+ * at random times; however the cluster state provides target_residency
+ * values as if all CPUs in a cluster enter the state at once; this is
+ * somewhat optimistic and behaviour should be fixed either in the governor
+ * or in the MCPM back-ends.
+ * To make this driver 100% generic the number of states and the exit_latency
+ * target_residency values must be obtained from device tree bindings.
+ *
+ * exit_latency: refers to the TC2 vexpress test chip and depends on the
+ * current cluster operating point. It is the time it takes to get the CPU
+ * up and running when the CPU is powered up on cluster wake-up from shutdown.
+ * Current values for big and LITTLE clusters are provided for clusters
+ * running at default operating points.
+ *
+ * target_residency: it is the minimum amount of time the cluster has
+ * to be down to break even in terms of power consumption. cluster
+ * shutdown has inherent dynamic power costs (L2 writebacks to DRAM
+ * being the main factor) that depend on the current operating points.
+ * The current values for both clusters are provided for a CPU whose half
+ * of L2 lines are dirty and require cleaning to DRAM, and takes into
+ * account leakage static power values related to the vexpress TC2 testchip.
+ */
+static struct cpuidle_driver bl_idle_little_driver = {
+ .name = "little_idle",
+ .owner = THIS_MODULE,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = bl_enter_powerdown,
+ .exit_latency = 700,
+ .target_residency = 2500,
+ .flags = CPUIDLE_FLAG_TIME_VALID |
+ CPUIDLE_FLAG_TIMER_STOP,
+ .name = "C1",
+ .desc = "ARM little-cluster power down",
+ },
+ .state_count = 2,
+};
+
+static struct cpuidle_driver bl_idle_big_driver = {
+ .name = "big_idle",
+ .owner = THIS_MODULE,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = bl_enter_powerdown,
+ .exit_latency = 500,
+ .target_residency = 2000,
+ .flags = CPUIDLE_FLAG_TIME_VALID |
+ CPUIDLE_FLAG_TIMER_STOP,
+ .name = "C1",
+ .desc = "ARM big-cluster power down",
+ },
+ .state_count = 2,
+};
+
+/*
+ * notrace prevents trace shims from getting inserted where they
+ * should not. Global jumps and ldrex/strex must not be inserted
+ * in power down sequences where caches and MMU may be turned off.
+ */
+static int notrace bl_powerdown_finisher(unsigned long arg)
+{
+ /* MCPM works with HW CPU identifiers */
+ unsigned int mpidr = read_cpuid_mpidr();
+ unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+ mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+
+ /*
+ * Residency value passed to mcpm_cpu_suspend back-end
+ * has to be given clear semantics. Set to 0 as a
+ * temporary value.
+ */
+ mcpm_cpu_suspend(0);
+
+ /* return value != 0 means failure */
+ return 1;
+}
+
+/**
+ * bl_enter_powerdown - Programs CPU to enter the specified state
+ * @dev: cpuidle device
+ * @drv: The target state to be programmed
+ * @idx: state index
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx)
+{
+ cpu_pm_enter();
+
+ cpu_suspend(0, bl_powerdown_finisher);
+
+ /* signals the MCPM core that CPU is out of low power state */
+ mcpm_cpu_powered_up();
+
+ cpu_pm_exit();
+
+ return idx;
+}
+
+static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
+{
+ struct cpuinfo_arm *cpu_info;
+ struct cpumask *cpumask;
+ unsigned long cpuid;
+ int cpu;
+
+ cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
+ if (!cpumask)
+ return -ENOMEM;
+
+ for_each_possible_cpu(cpu) {
+ cpu_info = &per_cpu(cpu_data, cpu);
+ cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id();
+
+ /* read cpu id part number */
+ if ((cpuid & 0xFFF0) == cpu_id)
+ cpumask_set_cpu(cpu, cpumask);
+ }
+
+ drv->cpumask = cpumask;
+
+ return 0;
+}
+
+static int __init bl_idle_init(void)
+{
+ int ret;
+
+ /*
+ * Initialize the driver just for a compliant set of machines
+ */
+ if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+ return -ENODEV;
+ /*
+ * For now the differentiation between little and big cores
+ * is based on the part number. A7 cores are considered little
+ * cores, A15 are considered big cores. This distinction may
+ * evolve in the future with a more generic matching approach.
+ */
+ ret = bl_idle_driver_init(&bl_idle_little_driver,
+ ARM_CPU_PART_CORTEX_A7);
+ if (ret)
+ return ret;
+
+ ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15);
+ if (ret)
+ goto out_uninit_little;
+
+ ret = cpuidle_register(&bl_idle_little_driver, NULL);
+ if (ret)
+ goto out_uninit_big;
+
+ ret = cpuidle_register(&bl_idle_big_driver, NULL);
+ if (ret)
+ goto out_unregister_little;
+
+ return 0;
+
+out_unregister_little:
+ cpuidle_unregister(&bl_idle_little_driver);
+out_uninit_big:
+ kfree(bl_idle_big_driver.cpumask);
+out_uninit_little:
+ kfree(bl_idle_little_driver.cpumask);
+
+ return ret;
+}
+device_initcall(bl_idle_init);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index ee7c50312066..d0e948084eaf 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -453,6 +453,12 @@ static void gic_cpu_init(struct gic_chip_data *gic)
writel_relaxed(1, base + GIC_CPU_CTRL);
}
+void gic_cpu_if_down(void)
+{
+ void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
+ writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+}
+
#ifdef CONFIG_CPU_PM
/*
* Saves the GIC distributor registers during suspend or idle. Must be called
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 3e203eb23cc7..0e5d9ecdb2b6 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -66,6 +66,7 @@ extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
+void gic_cpu_if_down(void);
static inline void gic_init(unsigned int nr, int start,
void __iomem *dist , void __iomem *cpu)