diff options
62 files changed, 793 insertions, 738 deletions
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 3be8ab2a886a..82fafe0429fe 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -157,6 +157,9 @@ struct virtqueue /* The routine to call when the Guest pings us. */ void (*handle_output)(int fd, struct virtqueue *me); + + /* Outstanding buffers */ + unsigned int inflight; }; /* Remember the arguments to the program so we can "reboot" */ @@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq, errx(1, "Looped descriptor"); } while ((i = next_desc(vq, i)) != vq->vring.num); + vq->inflight++; return head; } @@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len) /* Make sure buffer is written before we update index. */ wmb(); vq->vring.used->idx++; + vq->inflight--; } /* This actually sends the interrupt for this virtqueue */ @@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq) { unsigned long buf[] = { LHREQ_IRQ, vq->config.irq }; - /* If they don't want an interrupt, don't send one. */ - if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) + /* If they don't want an interrupt, don't send one, unless empty. */ + if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) + && vq->inflight) return; /* Send the Guest an interrupt tell them we used something up. */ @@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->next = NULL; vq->last_avail_idx = 0; vq->dev = dev; + vq->inflight = 0; /* Initialize the configuration. */ vq->config.num = num_descs; @@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg) /* Tell Guest what MAC address to use. */ add_feature(dev, VIRTIO_NET_F_MAC); + add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); set_config(dev, sizeof(conf), &conf); /* We don't need the socket any more; setup is done. */ diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index e698554895a7..3a3e9615b002 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -10,8 +10,8 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/blackfin.h> #include <asm/gptimers.h> diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index 3daf96035bf6..4685b7aa0080 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -76,4 +76,4 @@ ENTRY(_outsw_8) R0 = R0 + R1; .Lword8_loop_e: W[P0] = R0; RTS; -ENDPROC(_outsw) +ENDPROC(_outsw_8) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index bb6d58c931de..fa4f4e833e84 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -647,10 +647,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, + .irq = IRQ_PF8, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = 2, .controller_data = &spi_ad7877_chip_info, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 87e450f29e37..c94f7a5b8211 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o -obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o +obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S deleted file mode 100644 index 4e9ea4283e5f..000000000000 --- a/arch/blackfin/mach-bf537/boards/led.S +++ /dev/null @@ -1,183 +0,0 @@ -/**************************************************** - * LED1 ---- PF6 LED2 ---- PF7 * - * LED3 ---- PF8 LED4 ---- PF9 * - * LED5 ---- PF10 LED6 ---- PF11 * - ****************************************************/ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 12; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z); - R2 = ~R1; - - P0.H = hi(PORTF_FER); - P0.L = lo(PORTF_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_DIR); - P0.L = lo(PORTFIO_DIR); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_INEN); - P0.L = lo(PORTFIO_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - R1 = ~R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index eed161dd7845..319ef54c4221 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -2,5 +2,5 @@ # arch/blackfin/mach-bf548/boards/Makefile # -obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 3b74f96d3590..4f4ae8787edf 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { static int __init cm_bf548_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S deleted file mode 100644 index f47daf3770d0..000000000000 --- a/arch/blackfin/mach-bf548/boards/led.S +++ /dev/null @@ -1,172 +0,0 @@ -/**************************************************** - * LED1 ---- PG6 LED2 ---- PG7 * - * LED3 ---- PG8 LED4 ---- PG9 * - * LED5 ---- PG10 LED6 ---- PG11 * - ****************************************************/ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 0; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z); - R2 = ~R1; - - P0.H = hi(PORTG_FER); - P0.L = lo(PORTG_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTG_DIR_SET); - P0.L = lo(PORTG_DIR_SET); - W[P0] = R1.L; - SSYNC; - - P0.H = hi(PORTG_INEN); - P0.L = lo(PORTG_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_SET); - P0.L = lo(PORTG_SET); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_CLEAR); - P0.L = lo(PORTG_CLEAR); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 08a780d89807..fa9b6bbeb5af 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -251,14 +251,14 @@ dma@c300 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma"; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; cell-index = <1>; reg = <0xc300 0x4>; /* DMA general status register */ ranges = <0x0 0xc100 0x200>; dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <0>; reg = <0x0 0x80>; interrupt-parent = <&mpic>; @@ -266,7 +266,7 @@ }; dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <1>; reg = <0x80 0x80>; interrupt-parent = <&mpic>; @@ -274,7 +274,7 @@ }; dma-channel@2 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <2>; reg = <0x100 0x80>; interrupt-parent = <&mpic>; @@ -282,7 +282,7 @@ }; dma-channel@3 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <3>; reg = <0x180 0x80>; interrupt-parent = <&mpic>; diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 09f306248f2e..199e5f59d7a6 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Tue Mar 25 10:25:48 2008 +# Linux kernel version: 2.6.26-rc3 +# Tue May 27 16:08:06 2008 # CONFIG_PPC64=y @@ -29,6 +29,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y @@ -87,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -115,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -167,11 +173,11 @@ CONFIG_PPC_PASEMI=y CONFIG_PPC_PASEMI_IOMMU=y # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set CONFIG_PPC_PASEMI_MDIO=y -# CONFIG_PPC_CELLEB is not set # CONFIG_PPC_PS3 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_CELLEB is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y # CONFIG_IPIC is not set @@ -192,6 +198,7 @@ CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set @@ -226,7 +233,6 @@ CONFIG_PREEMPT_NONE=y CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y @@ -249,12 +255,14 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_64K_PAGES=y +CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -290,9 +298,12 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_ELECTRA_CF is not set +CONFIG_ELECTRA_CF=y # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 +CONFIG_PHYSICAL_START=0x00000000 # # Networking @@ -341,8 +352,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -473,6 +482,7 @@ CONFIG_MTD_NAND_PASEMI=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +530,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set # @@ -554,7 +563,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -632,7 +641,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -642,7 +654,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -689,6 +700,7 @@ CONFIG_PATA_PCMCIA=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -791,7 +803,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -810,6 +821,7 @@ CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -817,6 +829,7 @@ CONFIG_PASEMI_MAC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -890,6 +903,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -917,7 +931,6 @@ CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -936,13 +949,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=y -CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support @@ -971,6 +978,7 @@ CONFIG_I2C_PASEMI=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -980,19 +988,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1062,12 +1064,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1094,8 +1106,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y @@ -1213,6 +1225,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1292,11 +1305,11 @@ CONFIG_SND_USB_USX2Y=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1334,11 +1347,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1354,6 +1369,7 @@ CONFIG_USB_SL811_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1375,6 +1391,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1416,6 +1433,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -1475,10 +1493,6 @@ CONFIG_RTC_DRV_DS1307=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1576,12 +1590,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1665,9 +1677,10 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1677,6 +1690,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1684,6 +1698,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1694,18 +1709,23 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1735,53 +1755,83 @@ CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=y -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=y +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 602c268fc8a2..5d529bcbeee9 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -60,8 +60,10 @@ long long __ashrdi3(long long, int); long long __ashldi3(long long, int); long long __lshrdi3(long long, int); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(clear_user_page); +EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(transfer_to_handler); EXPORT_SYMBOL(do_IRQ); EXPORT_SYMBOL(machine_check_exception); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index af65b2da3ba0..5c7e2fd52075 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -582,8 +582,9 @@ static void __init lguest_init_IRQ(void) int vector = FIRST_EXTERNAL_VECTOR + i; if (vector != SYSCALL_VECTOR) { set_intr_gate(vector, interrupt[i]); - set_irq_chip_and_handler(i, &lguest_irq_controller, - handle_level_irq); + set_irq_chip_and_handler_name(i, &lguest_irq_controller, + handle_level_irq, + "level"); } } /* This call is required to set up for 4k stacks, where we have diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 97f83fb2ee2e..544b7d6c617c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -502,10 +502,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a9027b8fbdd5..3548ee7014ca 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -247,10 +247,11 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller 2 IDE (ICH8) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - /* Mobile SATA Controller IDE (ICH8M) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ @@ -526,7 +527,7 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c89f205c83f..cc816ca623d3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5403,7 +5403,7 @@ static void ata_host_stop(struct device *gendev, void *res) */ static void ata_finalize_port_ops(struct ata_port_operations *ops) { - static spinlock_t lock = SPIN_LOCK_UNLOCKED; + static DEFINE_SPINLOCK(lock); const struct ata_port_operations *cur; void **begin = (void **)ops; void **end = (void **)&ops->inherits; diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 0f9386d4a5a0..7daf4c0f6216 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -322,9 +322,12 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_port_for_each_link(link, ap) { - /* class code report is unreliable */ + /* Class code report is unreliable and SRST + * times out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index aeb6e01d82ce..2e6e1622dc6d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1637,6 +1637,7 @@ defer: /** * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. * @flags: unsigned long variable to store irq enable status * @copy_in: copy in from user buffer * @@ -1954,7 +1955,7 @@ static unsigned int ata_msense_ctl_mode(u8 *buf) /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @bufp: output buffer + * @buf: output buffer * * Generate a generic MODE SENSE r/w error recovery page. * diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 853559e32315..3924e7209a44 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -34,7 +34,7 @@ enum { SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ), + ATA_FLAG_PMP | ATA_FLAG_NCQ), SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ @@ -395,7 +395,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) cd = (struct command_desc *)pp->cmdentry + tag; cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; - ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", cd->cfis[0], cd->cfis[1], cd->cfis[2]); @@ -438,6 +438,8 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) ioread32(CA + hcr_base), ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); + /* Simply queue command to the controller/device */ iowrite32(1 << tag, CQ + hcr_base); @@ -558,11 +560,36 @@ static void sata_fsl_thaw(struct ata_port *ap) ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); } +static void sata_fsl_pmp_attach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); +} + +static void sata_fsl_pmp_detach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + +} + static int sata_fsl_port_start(struct ata_port *ap) { struct device *dev = ap->host->dev; struct sata_fsl_port_priv *pp; - int retval; void *mem; dma_addr_t mem_dma; struct sata_fsl_host_priv *host_priv = ap->host->private_data; @@ -688,12 +715,13 @@ static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) } static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) + unsigned long deadline) { struct ata_port *ap = link->ap; struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); u32 temp; struct ata_taskfile tf; u8 *cfis; @@ -703,6 +731,9 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, DPRINTK("in xx_softreset\n"); + if (pmp != SATA_PMP_CTRL_PORT) + goto issue_srst; + try_offline_again: /* * Force host controller to go off-line, aborting current operations @@ -746,6 +777,7 @@ try_offline_again: temp = ioread32(hcr_base + HCONTROL); temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); @@ -771,7 +803,8 @@ try_offline_again: ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); - goto err; + *class = ATA_DEV_NONE; + goto out; } /* @@ -783,7 +816,8 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); - goto err; + *class = ATA_DEV_NONE; + goto out; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", @@ -798,6 +832,7 @@ try_offline_again: * reached here, we can send a command to the target device */ +issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -808,7 +843,7 @@ try_offline_again: SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", cfis[0], cfis[1], cfis[2], cfis[3]); @@ -854,8 +889,10 @@ try_offline_again: sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); msleep(150); /* ?? */ @@ -886,12 +923,21 @@ try_offline_again: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } +out: return 0; err: return -EIO; } +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + sata_pmp_error_handler(ap); + +} + static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -905,18 +951,21 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) static void sata_fsl_error_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; - struct ata_eh_info *ehi = &link->eh_info; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - u32 hstatus, dereg, cereg = 0, SError = 0; + u32 hstatus, dereg=0, cereg = 0, SError = 0; unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - int freeze = 0; + int freeze = 0, abort=0; + struct ata_link *link = NULL; + struct ata_queued_cmd *qc = NULL; + struct ata_eh_info *ehi; hstatus = ioread32(hcr_base + HSTATUS); cereg = ioread32(hcr_base + CE); + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; ata_ehi_clear_desc(ehi); /* @@ -926,42 +975,28 @@ static void sata_fsl_error_intr(struct ata_port *ap) sata_fsl_scr_read(ap, SCR_ERROR, &SError); if (unlikely(SError & 0xFFFF0000)) { sata_fsl_scr_write(ap, SCR_ERROR, SError); - err_mask |= AC_ERR_ATA_BUS; } DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", hstatus, cereg, ioread32(hcr_base + DE), SError); - /* handle single device errors */ - if (cereg) { - /* - * clear the command error, also clears queue to the device - * in error, and we can (re)issue commands to this device. - * When a device is in error all commands queued into the - * host controller and at the device are considered aborted - * and the queue for that device is stopped. Now, after - * clearing the device error, we can issue commands to the - * device to interrogate it to find the source of the error. - */ - dereg = ioread32(hcr_base + DE); - iowrite32(dereg, hcr_base + DE); - iowrite32(cereg, hcr_base + CE); + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; - DPRINTK("single device error, CE=0x%x, DE=0x%x\n", - ioread32(hcr_base + CE), ioread32(hcr_base + DE)); /* - * We should consider this as non fatal error, and TF must - * be updated as done below. + * Ignore serror in case of fatal errors as we always want + * to do a soft-reset of the FSL SATA controller. Analyzing + * serror may cause libata to schedule a hard-reset action, + * and hard-reset currently does not do controller + * offline/online, causing command timeouts and leads to an + * un-recoverable state, hence make libATA ignore + * autopsy in case of fatal errors. */ - err_mask |= AC_ERR_DEV; - } + ehi->flags |= ATA_EHI_NO_AUTOPSY; - /* handle fatal errors */ - if (hstatus & FATAL_ERROR_DECODE) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_RESET; - /* how will fatal error interrupts be completed ?? */ freeze = 1; } @@ -971,30 +1006,83 @@ static void sata_fsl_error_intr(struct ata_port *ap) /* Setup a soft-reset EH action */ ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); freeze = 1; } - /* record error info */ - qc = ata_qc_from_tag(ap, link->active_tag); + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + abort = 1; + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); - if (qc) + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + if (dereg < ap->nr_pmp_links) { + link = &ap->pmp_link[dereg]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + err_mask |= AC_ERR_DEV; + } + } + + /* record error info */ + if (qc) { qc->err_mask |= err_mask; - else + } else ehi->err_mask |= err_mask; ehi->action |= action; - ehi->serror |= SError; /* freeze or abort */ if (freeze) ata_port_freeze(ap); - else - ata_port_abort(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } } static void sata_fsl_host_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, qc_active = 0; @@ -1017,10 +1105,19 @@ static void sata_fsl_host_intr(struct ata_port *ap) return; } - if (link->sactive) { /* only true for NCQ commands */ + /* Read command completed register */ + qc_active = ioread32(hcr_base + CC); + + VPRINTK("Status of all queues :\n"); + VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + qc_active, + ioread32(hcr_base + CA), + ioread32(hcr_base + CE), + ioread32(hcr_base + CQ), + ap->qc_active); + + if (qc_active & ap->qc_active) { int i; - /* Read command completed register */ - qc_active = ioread32(hcr_base + CC); /* clear CC bit, this will also complete the interrupt */ iowrite32(qc_active, hcr_base + CC); @@ -1032,8 +1129,9 @@ static void sata_fsl_host_intr(struct ata_port *ap) for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { if (qc_active & (1 << i)) { qc = ata_qc_from_tag(ap, i); - if (qc) + if (qc) { ata_qc_complete(qc); + } DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), @@ -1042,19 +1140,21 @@ static void sata_fsl_host_intr(struct ata_port *ap) } return; - } else if (ap->qc_active) { + } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { iowrite32(1, hcr_base + CC); - qc = ata_qc_from_tag(ap, link->active_tag); + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", - link->active_tag, ioread32(hcr_base + CC)); + DPRINTK("completing non-ncq cmd, CC=0x%x\n", + ioread32(hcr_base + CC)); - if (qc) + if (qc) { ata_qc_complete(qc); + } } else { /* Spurious Interrupt!! */ DPRINTK("spurious interrupt!!, CC = 0x%x\n", ioread32(hcr_base + CC)); + iowrite32(qc_active, hcr_base + CC); return; } } @@ -1130,9 +1230,6 @@ static int sata_fsl_init_controller(struct ata_host *host) iowrite32(0x00000FFFF, hcr_base + CE); iowrite32(0x00000FFFF, hcr_base + DE); - /* initially assuming no Port multiplier, set CQPMP to 0 */ - iowrite32(0x0, hcr_base + CQPMP); - /* * host controller will be brought on-line, during xx_port_start() * callback, that should also initiate the OOB, COMINIT sequence @@ -1154,8 +1251,8 @@ static struct scsi_host_template sata_fsl_sht = { .dma_boundary = ATA_DMA_BOUNDARY, }; -static const struct ata_port_operations sata_fsl_ops = { - .inherits = &sata_port_ops, +static struct ata_port_operations sata_fsl_ops = { + .inherits = &sata_pmp_port_ops, .qc_prep = sata_fsl_qc_prep, .qc_issue = sata_fsl_qc_issue, @@ -1168,10 +1265,15 @@ static const struct ata_port_operations sata_fsl_ops = { .thaw = sata_fsl_thaw, .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .pmp_softreset = sata_fsl_softreset, + .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, .port_start = sata_fsl_port_start, .port_stop = sata_fsl_port_stop, + + .pmp_attach = sata_fsl_pmp_attach, + .pmp_detach = sata_fsl_pmp_detach, }; static const struct ata_port_info sata_fsl_port_info[] = { diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb81f0c7a8c2..acf347f71a2f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.21" +#define DRV_VERSION "1.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -122,8 +122,6 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - /* SoC integrated controllers, no PCI interface */ - MV_FLAG_SOC = (1 << 28), MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | @@ -356,12 +354,12 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ + MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -374,7 +372,7 @@ enum { #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) -#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC)) +#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) #define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) #define WINDOW_BASE(i) (0x20034 + ((i) << 4)) @@ -652,7 +650,7 @@ static const struct ata_port_info mv_port_info[] = { .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC, + .flags = MV_GENIIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -812,12 +810,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crqb_dma & 0xffffffff) | index, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); /* * initialize response queue @@ -827,13 +820,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, WARN_ON(pp->crpb_dma & 0xff); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crpb_dma & 0xffffffff) | index, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } @@ -1254,7 +1241,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (HAS_PCI(ap->host)) + if (!IS_SOC(hpriv)) cfg |= (1 << 18); /* enab early completion */ if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ @@ -2225,7 +2212,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) * a bogus register value which can indicate HW removal or PCI fault. */ if (pending_irqs && main_irq_cause != 0xffffffffU) { - if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host))) + if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) handled = mv_pci_error(host, hpriv->base); else handled = mv_host_intr(host, pending_irqs); @@ -2547,7 +2534,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; + u32 m2, m3; if (fix_phy_mode2) { m2 = readl(port_mmio + PHY_MODE2); @@ -2564,28 +2551,37 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, udelay(200); } - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); + /* + * Gen-II/IIe PHY_MODE3 errata RM#2: + * Achieves better receiver noise performance than the h/w default: + */ + m3 = readl(port_mmio + PHY_MODE3); + m3 = (m3 & 0x1f) | (0x5555601 << 5); + + /* Guideline 88F5182 (GL# SATA-S11) */ + if (IS_SOC(hpriv)) + m3 &= ~0x1c; if (fix_phy_mode4) { u32 m4; m4 = readl(port_mmio + PHY_MODE4); - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + PHY_MODE3); - /* workaround for errata FEr SATA#10 (part 1) */ m4 = (m4 & ~(1 << 1)) | (1 << 0); - writel(m4, port_mmio + PHY_MODE4); + /* enforce bit restrictions on GenIIe devices */ + if (IS_GEN_IIE(hpriv)) + m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + PHY_MODE3); + writel(m4, port_mmio + PHY_MODE4); } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ m2 = readl(port_mmio + PHY_MODE2); @@ -2876,7 +2872,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host) void __iomem *mmio = hpriv->base; u32 reg; - if (!HAS_PCI(host) || !IS_PCIE(hpriv)) + if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) return 0; /* not PCI-X capable */ reg = readl(mmio + MV_PCI_MODE_OFS); if ((reg & MV_PCI_MODE_MASK) == 0) @@ -3003,10 +2999,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hp_flags |= MV_HP_CUT_THROUGH; switch (pdev->revision) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: + case 0x2: /* Rev.B0: the first/only public release */ hp_flags |= MV_HP_ERRATA_60X1C0; break; default: @@ -3018,7 +3011,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; case chip_soc: hpriv->ops = &mv_soc_ops; - hp_flags |= MV_HP_ERRATA_60X1C0; + hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0; break; default: @@ -3062,12 +3055,12 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) if (rc) goto done; - if (HAS_PCI(host)) { - hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; - } else { + if (IS_SOC(hpriv)) { hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS; hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS; + } else { + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } /* global interrupt mask: 0 == mask everything */ @@ -3093,7 +3086,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) mv_port_init(&ap->ioaddr, port_mmio); #ifdef CONFIG_PCI - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { unsigned int offset = port_mmio - mmio; ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); @@ -3113,7 +3106,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { /* Clear any currently outstanding host interrupt conditions */ writelfl(0, mmio + hpriv->irq_cause_ofs); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 84e064ffee52..dd7ea203f940 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -260,6 +260,10 @@ static int virtblk_probe(struct virtio_device *vdev) if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL); + /* If disk is read-only in the host, the guest should obey */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) + set_disk_ro(vblk->disk, 1); + /* Host must always specify the capacity. */ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), &cap, sizeof(cap)); @@ -311,6 +315,7 @@ static void virtblk_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_gendisk(vblk->disk); blk_cleanup_queue(vblk->disk->queue); put_disk(vblk->disk); mempool_destroy(vblk->pool); @@ -325,7 +330,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, }; static struct virtio_driver virtio_blk = { diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 8d6c2089d2a8..efd0b4db7c8e 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -112,3 +112,12 @@ config HW_RANDOM_PASEMI If unsure, say Y. +config HW_RANDOM_VIRTIO + tristate "VirtIO Random Number Generator support" + depends on HW_RANDOM && VIRTIO + ---help--- + This driver provides kernel-side support for the virtual Random Number + Generator hardware. + + To compile this driver as a module, choose M here: the + module will be called virtio-rng. If unsure, say N. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index c8b7300e2fb1..b4940ddbb35f 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o +obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c new file mode 100644 index 000000000000..d0e563e4fc39 --- /dev/null +++ b/drivers/char/hw_random/virtio-rng.c @@ -0,0 +1,155 @@ +/* + * Randomness driver for virtio + * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/err.h> +#include <linux/hw_random.h> +#include <linux/scatterlist.h> +#include <linux/spinlock.h> +#include <linux/virtio.h> +#include <linux/virtio_rng.h> + +/* The host will fill any buffer we give it with sweet, sweet randomness. We + * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a + * time. */ +#define RANDOM_DATA_SIZE 64 + +static struct virtqueue *vq; +static u32 *random_data; +static unsigned int data_left; +static DECLARE_COMPLETION(have_data); + +static void random_recv_done(struct virtqueue *vq) +{ + int len; + + /* We never get spurious callbacks. */ + if (!vq->vq_ops->get_buf(vq, &len)) + BUG(); + + data_left = len / sizeof(random_data[0]); + complete(&have_data); +} + +static void register_buffer(void) +{ + struct scatterlist sg; + + sg_init_one(&sg, random_data, RANDOM_DATA_SIZE); + /* There should always be room for one buffer. */ + if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0) + BUG(); + vq->vq_ops->kick(vq); +} + +/* At least we don't udelay() in a loop like some other drivers. */ +static int virtio_data_present(struct hwrng *rng, int wait) +{ + if (data_left) + return 1; + + if (!wait) + return 0; + + wait_for_completion(&have_data); + return 1; +} + +/* virtio_data_present() must have succeeded before this is called. */ +static int virtio_data_read(struct hwrng *rng, u32 *data) +{ + BUG_ON(!data_left); + + *data = random_data[--data_left]; + + if (!data_left) { + init_completion(&have_data); + register_buffer(); + } + return sizeof(*data); +} + +static struct hwrng virtio_hwrng = { + .name = "virtio", + .data_present = virtio_data_present, + .data_read = virtio_data_read, +}; + +static int virtrng_probe(struct virtio_device *vdev) +{ + int err; + + /* We expect a single virtqueue. */ + vq = vdev->config->find_vq(vdev, 0, random_recv_done); + if (IS_ERR(vq)) + return PTR_ERR(vq); + + err = hwrng_register(&virtio_hwrng); + if (err) { + vdev->config->del_vq(vq); + return err; + } + + register_buffer(); + return 0; +} + +static void virtrng_remove(struct virtio_device *vdev) +{ + vdev->config->reset(vdev); + hwrng_unregister(&virtio_hwrng); + vdev->config->del_vq(vq); +} + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_rng = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtrng_probe, + .remove = __devexit_p(virtrng_remove), +}; + +static int __init init(void) +{ + int err; + + random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL); + if (!random_data) + return -ENOMEM; + + err = register_virtio_driver(&virtio_rng); + if (err) + kfree(random_data); + return err; +} + +static void __exit fini(void) +{ + kfree(random_data); + unregister_virtio_driver(&virtio_rng); +} +module_init(init); +module_exit(fini); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("Virtio random number driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4a95adc4cc78..af58a6f1e898 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -807,6 +807,8 @@ static int atkbd_activate(struct atkbd *atkbd) static void atkbd_cleanup(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); + + atkbd_disable(atkbd); ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT); } diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 3dea0c5077a9..45767e73f071 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -136,6 +136,9 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) set_bit(code, input_dev->keybit); } + for (i = 0; i < pdata->direct_key_num; i++) + set_bit(pdata->direct_key_map[i], input_dev->keybit); + keypad->rotary_up_key[0] = pdata->rotary0_up_key; keypad->rotary_up_key[1] = pdata->rotary1_up_key; keypad->rotary_down_key[0] = pdata->rotary0_down_key; @@ -143,17 +146,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; - if (pdata->rotary0_up_key && pdata->rotary0_down_key) { - set_bit(pdata->rotary0_up_key, input_dev->keybit); - set_bit(pdata->rotary0_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary0_rel_code, input_dev->relbit); - - if (pdata->rotary1_up_key && pdata->rotary1_down_key) { - set_bit(pdata->rotary1_up_key, input_dev->keybit); - set_bit(pdata->rotary1_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary1_rel_code, input_dev->relbit); + if (pdata->enable_rotary0) { + if (pdata->rotary0_up_key && pdata->rotary0_down_key) { + set_bit(pdata->rotary0_up_key, input_dev->keybit); + set_bit(pdata->rotary0_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary0_rel_code, input_dev->relbit); + } + + if (pdata->enable_rotary1) { + if (pdata->rotary1_up_key && pdata->rotary1_down_key) { + set_bit(pdata->rotary1_up_key, input_dev->keybit); + set_bit(pdata->rotary1_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary1_rel_code, input_dev->relbit); + } } static inline unsigned int lookup_matrix_keycode( @@ -484,8 +491,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) keypad->input_dev = input_dev; input_set_drvdata(input_dev, keypad); - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_REL); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + if ((keypad->pdata->enable_rotary0 && + keypad->pdata->rotary0_rel_code) || + (keypad->pdata->enable_rotary1 && + keypad->pdata->rotary1_rel_code)) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + } pxa27x_keypad_build_keycode(keypad); platform_set_drvdata(pdev, keypad); diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index 9531d8c7444f..d82f7f727f7a 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -20,7 +20,6 @@ #include <linux/module.h> #include <linux/ioport.h> #include <linux/io.h> -#include <linux/module.h> #include <linux/input-polldev.h> #include <linux/i2c.h> #include <linux/workqueue.h> diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ece9f56babc..9aafa96cb746 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -331,6 +331,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { }, }, { + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, + { .ident = "Acer TravelMate 2490", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 65a74cfc187b..592ff55b62d0 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -885,6 +885,20 @@ static long i8042_panic_blink(long count) #undef DELAY +#ifdef CONFIG_X86 +static void i8042_dritek_enable(void) +{ + char param = 0x90; + int error; + + error = i8042_command(¶m, 0x1059); + if (error) + printk(KERN_WARNING + "Failed to enable DRITEK extension: %d\n", + error); +} +#endif + #ifdef CONFIG_PM /* * Here we try to restore the original BIOS settings. We only want to @@ -942,6 +956,12 @@ static int i8042_resume(struct platform_device *dev) return -EIO; } + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (i8042_mux_present) { if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) printk(KERN_WARNING @@ -1160,6 +1180,11 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) return error; +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (!i8042_noaux) { error = i8042_setup_aux(); if (error && error != -ENODEV && error != -EBUSY) @@ -1171,14 +1196,6 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) goto out_fail; } -#ifdef CONFIG_X86 - if (i8042_dritek) { - char param = 0x90; - error = i8042_command(¶m, 0x1059); - if (error) - goto out_fail; - } -#endif /* * Ok, everything is ready, let's register all serio ports */ diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index c5a8661a1baa..1e748e46d12e 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -830,7 +830,7 @@ static int gtco_probe(struct usb_interface *usbinterface, struct gtco *gtco; struct input_dev *input_dev; struct hid_descriptor *hid_desc; - char *report = NULL; + char *report; int result = 0, retry; int error; struct usb_endpoint_descriptor *endpoint; @@ -916,12 +916,16 @@ static int gtco_probe(struct usb_interface *usbinterface, le16_to_cpu(hid_desc->wDescriptorLength), 5000); /* 5 secs */ - if (result == le16_to_cpu(hid_desc->wDescriptorLength)) + dbg("usb_control_msg result: %d", result); + if (result == le16_to_cpu(hid_desc->wDescriptorLength)) { + parse_hid_report_descriptor(gtco, report, result); break; + } } + kfree(report); + /* If we didn't get the report, fail */ - dbg("usb_control_msg result: :%d", result); if (result != le16_to_cpu(hid_desc->wDescriptorLength)) { err("Failed to get HID Report Descriptor of size: %d", hid_desc->wDescriptorLength); @@ -929,12 +933,6 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_urb; } - /* Now we parse the report */ - parse_hid_report_descriptor(gtco, report, result); - - /* Now we delete it */ - kfree(report); - /* Create a device file node */ usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); @@ -988,7 +986,6 @@ static int gtco_probe(struct usb_interface *usbinterface, usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, gtco->buffer, gtco->buf_dma); err_free_devs: - kfree(report); input_free_device(input_dev); kfree(gtco); return error; diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 01278bd7e65c..838458792ea0 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -85,6 +85,15 @@ module_param(delay, int, 0); MODULE_PARM_DESC(delay, "Set adc sample delay."); /* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + +/* * Set adc mask function. * * Sources of glitch noise, such as signals driving an LCD display, may feed @@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm) 64000 / rpu); } + /* Five wire panel? */ + if (five_wire) { + dig3 |= WM9713_45W; + dev_info(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, + "Pressure measurement not supported in 5 " + "wire mode, disabling\n"); + pil = 0; + } + } + /* touchpanel pressure */ if (pil == 2) { dig3 |= WM9712_PIL; diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index e9c7ea46b6e3..cdc24ad314e0 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev) goto alloc_err; } + /* set up physical characteristics */ + wm->codec->phy_init(wm); + + /* load gpio cache */ + wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); + wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); + wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); + wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm->input_dev = input_allocate_device(); if (wm->input_dev == NULL) { ret = -ENOMEM; @@ -616,6 +627,7 @@ static int wm97xx_probe(struct device *dev) /* set up touch configuration */ wm->input_dev->name = "wm97xx touchscreen"; + wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; set_bit(EV_ABS, wm->input_dev->evbit); @@ -634,17 +646,6 @@ static int wm97xx_probe(struct device *dev) if (ret < 0) goto dev_alloc_err; - /* set up physical characteristics */ - wm->codec->phy_init(wm); - - /* load gpio cache */ - wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); - wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); - wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); - wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); - wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); - wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); - /* register our battery device */ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); if (!wm->battery_dev) { @@ -801,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm) EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops); static struct device_driver wm97xx_driver = { - .name = "ac97", + .name = "wm97xx-ts", .bus = &ac97_bus_type, .owner = THIS_MODULE, .probe = wm97xx_probe, diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 8080249957af..1a8de57289eb 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -20,14 +20,11 @@ /* The pointer to our (page) of device descriptions. */ static void *lguest_devices; -/* Unique numbering for lguest devices. */ -static unsigned int dev_index; - /* For Guests, device memory can be used as normal memory, so we cast away the * __iomem to quieten sparse. */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) { - return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages); + return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages); } static inline void lguest_unmap(void *addr) @@ -325,8 +322,10 @@ static struct device lguest_root = { * As Andrew Tridgell says, "Untested code is buggy code". * * It's worth reading this carefully: we start with a pointer to the new device - * descriptor in the "lguest_devices" page. */ -static void add_lguest_device(struct lguest_device_desc *d) + * descriptor in the "lguest_devices" page, and the offset into the device + * descriptor page so we can uniquely identify it if things go badly wrong. */ +static void add_lguest_device(struct lguest_device_desc *d, + unsigned int offset) { struct lguest_device *ldev; @@ -334,18 +333,14 @@ static void add_lguest_device(struct lguest_device_desc *d) * it. */ ldev = kzalloc(sizeof(*ldev), GFP_KERNEL); if (!ldev) { - printk(KERN_EMERG "Cannot allocate lguest dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n", + offset, d->type); return; } /* This devices' parent is the lguest/ dir. */ ldev->vdev.dev.parent = &lguest_root; /* We have a unique device index thanks to the dev_index counter. */ - ldev->vdev.index = dev_index++; - /* The device type comes straight from the descriptor. There's also a - * device vendor field in the virtio_device struct, which we leave as - * 0. */ ldev->vdev.id.device = d->type; /* We have a simple set of routines for querying the device's * configuration information and setting its status. */ @@ -357,8 +352,8 @@ static void add_lguest_device(struct lguest_device_desc *d) * virtio_device and calls device_register(). This makes the bus * infrastructure look for a matching driver. */ if (register_virtio_device(&ldev->vdev) != 0) { - printk(KERN_ERR "Failed to register lguest device %u\n", - ldev->vdev.index); + printk(KERN_ERR "Failed to register lguest dev %u type %u\n", + offset, d->type); kfree(ldev); } } @@ -379,7 +374,7 @@ static void scan_devices(void) break; printk("Device at %i has size %u\n", i, desc_size(d)); - add_lguest_device(d); + add_lguest_device(d, i); } } diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index e32148a8fa12..779c5db71be4 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -18,8 +18,12 @@ #include "rpadlpar.h" #define DLPAR_KOBJ_NAME "control" -#define ADD_SLOT_ATTR_NAME "add_slot" -#define REMOVE_SLOT_ATTR_NAME "remove_slot" + +/* Those two have no quotes because they are passed to __ATTR() which + * stringifies the argument (yuck !) + */ +#define ADD_SLOT_ATTR_NAME add_slot +#define REMOVE_SLOT_ATTR_NAME remove_slot #define MAX_DRC_NAME_LEN 64 diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c index 0a6cea1316b4..52d0aa8c2e7a 100644 --- a/drivers/pcmcia/electra_cf.c +++ b/drivers/pcmcia/electra_cf.c @@ -352,6 +352,7 @@ static struct of_device_id electra_cf_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, electra_cf_match); static struct of_platform_driver electra_cf_driver = { .name = (char *)driver_name, diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 9f55ce6f3c78..5ab34340919b 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -31,11 +31,6 @@ */ static void *kvm_devices; -/* - * Unique numbering for kvm devices. - */ -static unsigned int dev_index; - struct kvm_device { struct virtio_device vdev; struct kvm_device_desc *desc; @@ -250,26 +245,25 @@ static struct device kvm_root = { * adds a new device and register it with virtio * appropriate drivers are loaded by the device model */ -static void add_kvm_device(struct kvm_device_desc *d) +static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset) { struct kvm_device *kdev; kdev = kzalloc(sizeof(*kdev), GFP_KERNEL); if (!kdev) { - printk(KERN_EMERG "Cannot allocate kvm dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n", + offset, d->type); return; } kdev->vdev.dev.parent = &kvm_root; - kdev->vdev.index = dev_index++; kdev->vdev.id.device = d->type; kdev->vdev.config = &kvm_vq_configspace_ops; kdev->desc = d; if (register_virtio_device(&kdev->vdev) != 0) { - printk(KERN_ERR "Failed to register kvm device %u\n", - kdev->vdev.index); + printk(KERN_ERR "Failed to register kvm device %u type %u\n", + offset, d->type); kfree(kdev); } } @@ -289,7 +283,7 @@ static void scan_devices(void) if (d->type == 0) break; - add_kvm_device(d); + add_kvm_device(d, i); } } diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 1400ea6a2491..1bc00b721e9d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/serial.h> #include "8250.h" @@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; */ #define CONFIG_HUB6 1 +#include <asm/serial.h> /* * SERIAL_PORT_DFNS tells us about built-in ports that have no * standard enumeration mechanism. Platforms that can find all @@ -1547,8 +1547,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up) i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= SERIAL_EXTRA_IRQ_FLAGS; - ret = request_irq(up->port.irq, serial8250_interrupt, irq_flags, "serial", i); if (ret < 0) diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h index a10a40cc0d9e..91bd28f2bb47 100644 --- a/drivers/serial/8250.h +++ b/drivers/serial/8250.h @@ -78,8 +78,3 @@ struct serial8250_config { #else #define ALPHA_KLUDGE_MCR 0 #endif - -#ifndef SERIAL_EXTRA_IRQ_FLAGS -#define SERIAL_EXTRA_IRQ_FLAGS 0 -#endif - diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 13866789b356..0f3c2bb7bf35 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -2,6 +2,9 @@ #include <linux/spinlock.h> #include <linux/virtio_config.h> +/* Unique numbering for virtio devices. */ +static unsigned int dev_index; + static ssize_t device_show(struct device *_d, struct device_attribute *attr, char *buf) { @@ -166,7 +169,10 @@ int register_virtio_device(struct virtio_device *dev) int err; dev->dev.bus = &virtio_bus; - sprintf(dev->dev.bus_id, "%u", dev->index); + + /* Assign a unique device index and hence name. */ + dev->index = dev_index++; + sprintf(dev->dev.bus_id, "virtio%u", dev->index); /* We always start by resetting the device, in case a previous * driver messed it up. This also tests that code path a little. */ diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 27e9fc9117cd..eae7236310e4 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -78,9 +78,6 @@ static struct device virtio_pci_root = { .bus_id = "virtio-pci", }; -/* Unique numbering for devices under the kvm root */ -static unsigned int dev_index; - /* Convert a generic virtio device to our structure */ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) { @@ -325,10 +322,6 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index); - vp_dev->vdev.index = dev_index; - dev_index++; - vp_dev->vdev.dev.parent = &virtio_pci_root; vp_dev->vdev.config = &virtio_pci_config_ops; vp_dev->pci_dev = pci_dev; diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 937a49d6772c..72bf8bc09014 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -227,7 +227,6 @@ static bool vring_enable_cb(struct virtqueue *_vq) struct vring_virtqueue *vq = to_vvq(_vq); START_USE(vq); - BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)); /* We optimistically turn back on interrupts, then check if there was * more to do. */ @@ -254,13 +253,6 @@ irqreturn_t vring_interrupt(int irq, void *_vq) if (unlikely(vq->broken)) return IRQ_HANDLED; - /* Other side may have missed us turning off the interrupt, - * but we should preserve disable semantic for virtio users. */ - if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) { - pr_debug("virtqueue interrupt after disable for %p\n", vq); - return IRQ_HANDLED; - } - pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback); if (vq->vq.callback) vq->vq.callback(&vq->vq); diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index f85b19625f97..30d09cbbad94 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -221,8 +221,7 @@ geodewdt_probe(struct platform_device *dev) { int ret, timer; - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, - MFGPT_DOMAIN_WORKING, THIS_MODULE); + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (timer == -1) { printk(KERN_ERR "geodewdt: No timers were available\n"); diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 1e44ad14881a..a27d61581bd6 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -142,53 +142,43 @@ static void o2net_idle_timer(unsigned long data); static void o2net_sc_postpone_idle(struct o2net_sock_container *sc); static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc); -static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, - u32 msgkey, struct task_struct *task, u8 node) -{ #ifdef CONFIG_DEBUG_FS +void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) +{ INIT_LIST_HEAD(&nst->st_net_debug_item); nst->st_task = task; nst->st_msg_type = msgtype; nst->st_msg_key = msgkey; nst->st_node = node; -#endif } -static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_sock_time); -#endif } -static void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +void o2net_set_nst_send_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_send_time); -#endif } -static void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +void o2net_set_nst_status_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_status_time); -#endif } -static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, +void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, struct o2net_sock_container *sc) { -#ifdef CONFIG_DEBUG_FS nst->st_sc = sc; -#endif } -static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) +void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) { -#ifdef CONFIG_DEBUG_FS nst->st_id = msg_id; -#endif } +#endif /* CONFIG_DEBUG_FS */ static inline int o2net_reconnect_delay(void) { diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h index a705d5d19036..fd6179eb26d4 100644 --- a/fs/ocfs2/cluster/tcp.h +++ b/fs/ocfs2/cluster/tcp.h @@ -128,23 +128,23 @@ void o2net_debug_del_nst(struct o2net_send_tracking *nst); void o2net_debug_add_sc(struct o2net_sock_container *sc); void o2net_debug_del_sc(struct o2net_sock_container *sc); #else -static int o2net_debugfs_init(void) +static inline int o2net_debugfs_init(void) { return 0; } -static void o2net_debugfs_exit(void) +static inline void o2net_debugfs_exit(void) { } -static void o2net_debug_add_nst(struct o2net_send_tracking *nst) +static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst) { } -static void o2net_debug_del_nst(struct o2net_send_tracking *nst) +static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst) { } -static void o2net_debug_add_sc(struct o2net_sock_container *sc) +static inline void o2net_debug_add_sc(struct o2net_sock_container *sc) { } -static void o2net_debug_del_sc(struct o2net_sock_container *sc) +static inline void o2net_debug_del_sc(struct o2net_sock_container *sc) { } #endif /* CONFIG_DEBUG_FS */ diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 8d58cfe410b1..18307ff81b77 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -224,10 +224,42 @@ struct o2net_send_tracking { struct timeval st_send_time; struct timeval st_status_time; }; + +void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node); +void o2net_set_nst_sock_time(struct o2net_send_tracking *nst); +void o2net_set_nst_send_time(struct o2net_send_tracking *nst); +void o2net_set_nst_status_time(struct o2net_send_tracking *nst); +void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, + struct o2net_sock_container *sc); +void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id); + #else struct o2net_send_tracking { u32 dummy; }; + +static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) +{ +} +static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, + struct o2net_sock_container *sc) +{ +} +static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, + u32 msg_id) +{ +} #endif /* CONFIG_DEBUG_FS */ #endif /* O2CLUSTER_TCP_INTERNAL_H */ diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h index d34a62a3a625..8c686d22f9c7 100644 --- a/fs/ocfs2/dlm/dlmdebug.h +++ b/fs/ocfs2/dlm/dlmdebug.h @@ -60,25 +60,25 @@ void dlm_destroy_debugfs_root(void); #else -static int dlm_debug_init(struct dlm_ctxt *dlm) +static inline int dlm_debug_init(struct dlm_ctxt *dlm) { return 0; } -static void dlm_debug_shutdown(struct dlm_ctxt *dlm) +static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm) { } -static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm) +static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm) { return 0; } -static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm) +static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm) { } -static int dlm_create_debugfs_root(void) +static inline int dlm_create_debugfs_root(void) { return 0; } -static void dlm_destroy_debugfs_root(void) +static inline void dlm_destroy_debugfs_root(void) { } diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index b503772cd0ec..6b97d11f6bf8 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -61,7 +61,7 @@ * negotiated by the client. The client negotiates based on the maximum * version advertised in /sys/fs/ocfs2/max_locking_protocol. The major * number from the "SETV" message must match - * user_stack.sp_proto->lp_max_version.pv_major, and the minor number + * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number * must be less than or equal to ...->lp_max_version.pv_minor. * * Once this information has been set, mounts will be allowed. From this @@ -153,7 +153,7 @@ union ocfs2_control_message { struct ocfs2_control_message_down u_down; }; -static struct ocfs2_stack_plugin user_stack; +static struct ocfs2_stack_plugin ocfs2_user_plugin; static atomic_t ocfs2_control_opened; static int ocfs2_control_this_node = -1; @@ -399,7 +399,7 @@ static int ocfs2_control_do_setversion_msg(struct file *file, char *ptr = NULL; struct ocfs2_control_private *p = file->private_data; struct ocfs2_protocol_version *max = - &user_stack.sp_proto->lp_max_version; + &ocfs2_user_plugin.sp_proto->lp_max_version; if (ocfs2_control_get_handshake_state(file) != OCFS2_CONTROL_HANDSHAKE_PROTOCOL) @@ -680,7 +680,7 @@ static void fsdlm_lock_ast_wrapper(void *astarg) struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg); int status = lksb->sb_status; - BUG_ON(user_stack.sp_proto == NULL); + BUG_ON(ocfs2_user_plugin.sp_proto == NULL); /* * For now we're punting on the issue of other non-standard errors @@ -693,16 +693,16 @@ static void fsdlm_lock_ast_wrapper(void *astarg) */ if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL) - user_stack.sp_proto->lp_unlock_ast(astarg, 0); + ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0); else - user_stack.sp_proto->lp_lock_ast(astarg); + ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg); } static void fsdlm_blocking_ast_wrapper(void *astarg, int level) { - BUG_ON(user_stack.sp_proto == NULL); + BUG_ON(ocfs2_user_plugin.sp_proto == NULL); - user_stack.sp_proto->lp_blocking_ast(astarg, level); + ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level); } static int user_dlm_lock(struct ocfs2_cluster_connection *conn, @@ -838,7 +838,7 @@ static int user_cluster_this_node(unsigned int *this_node) return 0; } -static struct ocfs2_stack_operations user_stack_ops = { +static struct ocfs2_stack_operations ocfs2_user_plugin_ops = { .connect = user_cluster_connect, .disconnect = user_cluster_disconnect, .this_node = user_cluster_this_node, @@ -849,20 +849,20 @@ static struct ocfs2_stack_operations user_stack_ops = { .dump_lksb = user_dlm_dump_lksb, }; -static struct ocfs2_stack_plugin user_stack = { +static struct ocfs2_stack_plugin ocfs2_user_plugin = { .sp_name = "user", - .sp_ops = &user_stack_ops, + .sp_ops = &ocfs2_user_plugin_ops, .sp_owner = THIS_MODULE, }; -static int __init user_stack_init(void) +static int __init ocfs2_user_plugin_init(void) { int rc; rc = ocfs2_control_init(); if (!rc) { - rc = ocfs2_stack_glue_register(&user_stack); + rc = ocfs2_stack_glue_register(&ocfs2_user_plugin); if (rc) ocfs2_control_exit(); } @@ -870,14 +870,14 @@ static int __init user_stack_init(void) return rc; } -static void __exit user_stack_exit(void) +static void __exit ocfs2_user_plugin_exit(void) { - ocfs2_stack_glue_unregister(&user_stack); + ocfs2_stack_glue_unregister(&ocfs2_user_plugin); ocfs2_control_exit(); } MODULE_AUTHOR("Oracle"); MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks"); MODULE_LICENSE("GPL"); -module_init(user_stack_init); -module_exit(user_stack_exit); +module_init(ocfs2_user_plugin_init); +module_exit(ocfs2_user_plugin_exit); diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index a9248d883675..76033831eb35 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -105,13 +105,6 @@ extern int sram_free(const void*); extern void *sram_alloc_with_lsl(size_t, unsigned long); extern int sram_free_with_lsl(const void*); -extern void led_on(int); -extern void led_off(int); -extern void led_toggle(int); -extern void led_disp_num(int); -extern void led_toggle_num(int); -extern void init_leds(void); - extern const char bfin_board_name[]; extern unsigned long wall_jiffies; diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h index 735fa02fafb2..4725268a5ada 100644 --- a/include/asm-blackfin/mach-bf527/anomaly.h +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -15,12 +15,16 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ @@ -92,7 +96,6 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) -#define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 5a6dcc5fa36c..8f7ea112fd3a 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -176,6 +176,21 @@ #define ANOMALY_05000315 (1) /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -249,20 +264,6 @@ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) -/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (1) -/* UART Break Signal Issues */ -#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) -/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ -#define ANOMALY_05000366 (1) -/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (1) -/* PPI Does Not Start Properly In Specific Mode */ -#define ANOMALY_05000400 (__SILICON_REVISION__ == 5) -/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ == 5) -/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ -#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index a6b08facb242..8460ab9c324f 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -132,8 +132,8 @@ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */ -#define ANOMALY_05000350 (__SILICON_REVISION__ < 3) +/* New Feature: UART Remains Enabled after UART Boot */ +#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -145,12 +145,10 @@ /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3) +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) - - /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) #define ANOMALY_05000158 (0) diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 49d3cebc5293..3ad59655881a 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -75,6 +75,8 @@ #define ANOMALY_05000365 (1) /* Addressing Conflict between Boot ROM and Asynchronous Memory */ #define ANOMALY_05000369 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Mobile DDR Operation Not Functional */ #define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 82157caa96a2..5c5d7d7d695f 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index e0062d73db1c..89189488e286 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -100,7 +100,7 @@ static inline type name(const volatile type __iomem *addr) \ { \ type ret; \ __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \ - : "=r" (ret) : "r" (addr), "m" (*addr)); \ + : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ return ret; \ } @@ -108,8 +108,8 @@ static inline type name(const volatile type __iomem *addr) \ static inline void name(volatile type __iomem *addr, type val) \ { \ __asm__ __volatile__("sync;" insn \ - : "=m" (*addr) : "r" (val), "r" (addr)); \ - IO_SET_SYNC_FLAG(); \ + : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ + IO_SET_SYNC_FLAG(); \ } @@ -333,7 +333,8 @@ static inline unsigned int name(unsigned int port) \ " .long 3b,5b\n" \ ".previous" \ : "=&r" (x) \ - : "r" (port + _IO_BASE)); \ + : "r" (port + _IO_BASE) \ + : "memory"); \ return x; \ } @@ -350,7 +351,8 @@ static inline void name(unsigned int val, unsigned int port) \ " .long 0b,2b\n" \ " .long 1b,2b\n" \ ".previous" \ - : : "r" (val), "r" (port + _IO_BASE)); \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ } __do_in_asm(_rec_inb, "lbzx") diff --git a/include/linux/input.h b/include/linux/input.h index 28a094fcfe20..e075c4b762fb 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -637,7 +637,9 @@ struct input_absinfo { #define SW_LID 0x00 /* set = lid shut */ #define SW_TABLET_MODE 0x01 /* set = tablet mode */ #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RADIO 0x03 /* set = radio enabled */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index e9bbe3ebd721..d5ca78b93a3b 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -1,6 +1,8 @@ #ifndef __LINUX_SPI_MMC_SPI_H #define __LINUX_SPI_MMC_SPI_H +#include <linux/interrupt.h> + struct device; struct mmc_host; diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index d4695a3356d0..5f79a5f9de79 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -10,18 +10,19 @@ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ #define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ +#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ - __le64 capacity; + __u64 capacity; /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ - __le32 size_max; + __u32 size_max; /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ - __le32 seg_max; + __u32 seg_max; /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */ struct virtio_blk_geometry { - __le16 cylinders; + __u16 cylinders; __u8 heads; __u8 sectors; } geometry; diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 50db245c81ad..f364bbf63c34 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -15,6 +15,10 @@ /* We've given up on this device. */ #define VIRTIO_CONFIG_S_FAILED 0x80 +/* Do we get callbacks when the ring is completely used, even if we've + * suppressed them? */ +#define VIRTIO_F_NOTIFY_ON_EMPTY 24 + #ifdef __KERNEL__ #include <linux/virtio.h> @@ -99,7 +103,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, * The return value is -ENOENT if the feature doesn't exist. Otherwise * the config value is copied into whatever is pointed to by v. */ #define virtio_config_val(vdev, fbit, offset, v) \ - virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v)) + virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v)) static inline int virtio_config_buf(struct virtio_device *vdev, unsigned int fbit, diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h new file mode 100644 index 000000000000..331afb6c9f62 --- /dev/null +++ b/include/linux/virtio_rng.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_VIRTIO_RNG_H +#define _LINUX_VIRTIO_RNG_H +#include <linux/virtio_config.h> + +/* The ID for virtio_rng */ +#define VIRTIO_ID_RNG 4 + +#endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 4d13732e9cf0..6f69968eab24 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -100,6 +100,7 @@ #define WM9713_ADCSEL_Y 0x0004 /* Y measurement */ #define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */ #define WM9713_COO 0x0001 /* enable coordinate mode */ +#define WM9713_45W 0x1000 /* set for 5 wire panel */ #define WM9713_PDEN 0x0800 /* measure only when pen down */ #define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */ #define WM9713_WAIT 0x0200 /* coordinate wait */ diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index a098a0454dc8..17092d6c7db3 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -43,7 +43,13 @@ _modpost: __modpost include include/config/auto.conf include scripts/Kbuild.include +# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info ifneq ($(KBUILD_EXTMOD),) + +# set src + obj - they may be used when building the .mod.c file +obj := $(KBUILD_EXTMOD) +src := $(obj) + # Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \ $(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile) diff --git a/scripts/decodecode b/scripts/decodecode index 235d3938529d..235d3938529d 100644..100755 --- a/scripts/decodecode +++ b/scripts/decodecode |