summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS17
-rw-r--r--arch/arm/common/Kconfig4
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/sharpsl_pm.c859
-rw-r--r--arch/arm/configs/cm_x300_defconfig329
-rw-r--r--arch/arm/configs/magician_defconfig5
-rw-r--r--arch/arm/mach-mmp/include/mach/irqs.h1
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa168.h27
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa910.h8
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa168.h44
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa910.h44
-rw-r--r--arch/arm/mach-mmp/include/mach/regs-apbc.h14
-rw-r--r--arch/arm/mach-mmp/pxa168.c18
-rw-r--r--arch/arm/mach-mmp/pxa910.c18
-rw-r--r--arch/arm/mach-pxa/Kconfig25
-rw-r--r--arch/arm/mach-pxa/Makefile3
-rw-r--r--arch/arm/mach-pxa/cm-x270.c4
-rw-r--r--arch/arm/mach-pxa/cm-x300.c55
-rw-r--r--arch/arm/mach-pxa/corgi.c47
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c3
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c104
-rw-r--r--arch/arm/mach-pxa/csb726.c20
-rw-r--r--arch/arm/mach-pxa/devices.c4
-rw-r--r--arch/arm/mach-pxa/em-x270.c173
-rw-r--r--arch/arm/mach-pxa/ezx.c177
-rw-r--r--arch/arm/mach-pxa/hx4700.c851
-rw-r--r--arch/arm/mach-pxa/imote2.c52
-rw-r--r--arch/arm/mach-pxa/include/mach/hx4700.h131
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h18
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa320.h14
-rw-r--r--arch/arm/mach-pxa/include/mach/pm.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa27x.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/sharpsl_pm.h (renamed from arch/arm/include/asm/hardware/sharpsl_pm.h)8
-rw-r--r--arch/arm/mach-pxa/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-pxa/littleton.c82
-rw-r--r--arch/arm/mach-pxa/magician.c14
-rw-r--r--arch/arm/mach-pxa/mainstone.c2
-rw-r--r--arch/arm/mach-pxa/mioa701.c4
-rw-r--r--arch/arm/mach-pxa/palmld.c31
-rw-r--r--arch/arm/mach-pxa/palmt5.c46
-rw-r--r--arch/arm/mach-pxa/palmte2.c32
-rw-r--r--arch/arm/mach-pxa/palmtx.c45
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c2
-rw-r--r--arch/arm/mach-pxa/pm.c4
-rw-r--r--arch/arm/mach-pxa/poodle.c17
-rw-r--r--arch/arm/mach-pxa/pxa27x.c21
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c4
-rw-r--r--arch/arm/mach-pxa/saar.c2
-rw-r--r--arch/arm/mach-pxa/sharpsl.h4
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c863
-rw-r--r--arch/arm/mach-pxa/spitz.c78
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c3
-rw-r--r--arch/arm/mach-pxa/stargate2.c796
-rw-r--r--arch/arm/mach-pxa/tosa.c2
-rw-r--r--arch/arm/mach-pxa/trizeps4.c2
-rw-r--r--arch/arm/mach-pxa/viper.c2
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c2
-rw-r--r--arch/arm/mach-sa1100/collie_pm.c296
-rw-r--r--arch/arm/plat-pxa/Makefile2
-rw-r--r--arch/arm/plat-pxa/include/plat/i2c.h (renamed from arch/arm/mach-pxa/include/mach/i2c.h)0
-rw-r--r--arch/arm/plat-pxa/pwm.c (renamed from arch/arm/mach-pxa/pwm.c)119
-rw-r--r--drivers/i2c/busses/i2c-pxa.c22
-rw-r--r--drivers/net/smc91x.h5
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/pxa2xx_stargate2.c174
-rw-r--r--drivers/video/Kconfig10
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/pxa168fb.c803
-rw-r--r--drivers/video/pxa168fb.h558
-rw-r--r--include/video/pxa168fb.h127
-rw-r--r--sound/soc/pxa/Kconfig7
-rw-r--r--sound/soc/pxa/palm27x.c2
73 files changed, 5587 insertions, 1686 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 581fedcce2b5..1ab1b7f4e4c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -680,6 +680,13 @@ M: sakoman@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P: Philipp Zabel
+M: philipp.zabel@gmail.com
+S: Maintained
+F: arch/arm/mach-pxa/hx4700.c
+F: arch/arm/mach-pxa/include/mach/hx4700.h
+
ARM/HP JORNADA 7XX MACHINE SUPPORT
P: Kristoffer Ericson
M: kristoffer.ericson@gmail.com
@@ -4627,7 +4634,7 @@ F: drivers/media/video/pvrusb2/
PXA2xx/PXA3xx SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
P: Russell King
M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -4641,19 +4648,19 @@ F: sound/soc/pxa/pxa2xx*
PXA168 SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
P: Jason Chagas
M: jason.chagas@marvell.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S: Supported
+S: Maintained
PXA910 SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S: Supported
+S: Maintained
PXA MMCI DRIVER
S: Orphan
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 08f27862d09d..4efbb9df0444 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -35,10 +35,6 @@ config SHARP_LOCOMO
config SHARP_PARAM
bool
-config SHARPSL_PM
- bool
- select APM_EMULATION
-
config SHARP_SCOOP
bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961d81cb..76be7ff2a7ca 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_TIMER_ACORN) += time-acorn.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d721d50..000000000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
- int i = sharpsl_pm.machinfo->bat_levels - 1;
- int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
- struct battery_thresh *thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
- else
- thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
- while (i > 0 && (voltage > thresh[i].voltage))
- i--;
-
- return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
- int low_thresh, high_thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON) {
- high_thresh = sharpsl_pm.machinfo->status_high_acin;
- low_thresh = sharpsl_pm.machinfo->status_low_acin;
- } else {
- high_thresh = sharpsl_pm.machinfo->status_high_noac;
- low_thresh = sharpsl_pm.machinfo->status_low_noac;
- }
-
- if (voltage >= high_thresh)
- return APM_BATTERY_STATUS_HIGH;
- if (voltage >= low_thresh)
- return APM_BATTERY_STATUS_LOW;
- return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
- int voltage, percent, apm_status, i = 0;
-
- if (!sharpsl_pm.machinfo)
- return;
-
- sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
- /* Corgi cannot confirm when battery fully charged so periodically kick! */
- if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
- && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
- schedule_delayed_work(&toggle_charger, 0);
-
- while(1) {
- voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
- if (voltage > 0) break;
- if (i++ > 5) {
- voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
- dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
- break;
- }
- }
-
- voltage = sharpsl_average_value(voltage);
- apm_status = get_apm_status(voltage);
- percent = get_percentage(voltage);
-
- /* At low battery voltages, the voltage has a tendency to start
- creeping back up so we try to avoid this here */
- if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
- sharpsl_pm.battstat.mainbat_voltage = voltage;
- sharpsl_pm.battstat.mainbat_status = apm_status;
- sharpsl_pm.battstat.mainbat_percent = percent;
- }
-
- dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
- sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
- /* If battery is low. limit backlight intensity to save power. */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
- (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
- if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- sharpsl_pm.machinfo->backlight_limit(1);
- sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
- }
- } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- sharpsl_pm.machinfo->backlight_limit(0);
- sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
- }
-#endif
-
- /* Suspend if critical battery level */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
- && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- dev_err(sharpsl_pm.dev, "Fatal Off\n");
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
- if (val == SHARPSL_LED_ERROR) {
- dev_err(sharpsl_pm.dev, "Charging Error!\n");
- } else if (val == SHARPSL_LED_ON) {
- dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
- led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
- } else {
- dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
- led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
- }
-}
-
-static void sharpsl_charge_on(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
- sharpsl_pm.full_count = 0;
- sharpsl_pm.charge_mode = CHRG_ON;
- schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm_led(SHARPSL_LED_OFF);
- sharpsl_pm.charge_mode = CHRG_OFF;
-
- schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
- sharpsl_pm_led(SHARPSL_LED_ERROR);
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
- dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
- sharpsl_charge_off();
- return;
- } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
- sharpsl_charge_error();
- return;
- }
-
- sharpsl_pm_led(SHARPSL_LED_ON);
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
-
- sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
- int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
- sharpsl_average_clear();
- if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
- sharpsl_charge_on();
- else if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
-
- schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
- /* Delay the event slightly to debounce */
- /* Must be a smaller delay than the chrg_full_isr below */
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
- dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
- sharpsl_pm.full_count++;
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
- } else if (sharpsl_pm.full_count < 2) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
- schedule_delayed_work(&toggle_charger, 0);
- } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
- schedule_delayed_work(&toggle_charger, 0);
- } else {
- sharpsl_charge_off();
- sharpsl_pm.charge_mode = CHRG_DONE;
- dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
- }
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
- delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
- if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
- return IRQ_HANDLED;
-
- /* delay until after any ac interrupt */
- mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
- int is_fatal = 0;
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
- dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
- is_fatal = 1;
- }
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
- dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
- is_fatal = 1;
- }
-
- if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM 10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
- sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
- int i, ad_val = 0;
- static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
- if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
- sharpsl_ad_index = 0;
- return ad;
- }
-
- sharpsl_ad[sharpsl_ad_index] = ad;
- sharpsl_ad_index++;
- if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
- for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
- sharpsl_ad[i] = sharpsl_ad[i+1];
- sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
- }
- for (i=0; i < sharpsl_ad_index; i++)
- ad_val += sharpsl_ad[i];
-
- return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
- int i, j, k, temp, sum = 0;
-
- /* Find MAX val */
- temp = val[0];
- j=0;
- for (i=1; i<5; i++) {
- if (temp < val[i]) {
- temp = val[i];
- j = i;
- }
- }
-
- /* Find MIN val */
- temp = val[4];
- k=4;
- for (i=3; i>=0; i--) {
- if (temp > val[i]) {
- temp = val[i];
- k = i;
- }
- }
-
- for (i=0; i<5; i++)
- if (i != j && i != k )
- sum += val[i];
-
- dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
- return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
- int val, i, buff[5];
-
- /* Check battery temperature */
- for (i=0; i<5; i++) {
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- sharpsl_pm.machinfo->measure_temp(1);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
- sharpsl_pm.machinfo->measure_temp(0);
- }
-
- val = get_select_val(buff);
-
- dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > sharpsl_pm.machinfo->charge_on_temp) {
- printk(KERN_WARNING "Not charging: temperature out of limits.\n");
- return -1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
- int val, i, buff[5];
-
- /* disable charge, enable discharge */
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.machinfo->discharge(1);
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery voltage */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- sharpsl_pm.machinfo->discharge(0);
-
- val = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
- if (val < sharpsl_pm.machinfo->charge_on_volt)
- return -1;
-
- return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
- int temp, i, buff[5];
-
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
- if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
- dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
- return -1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
- sharpsl_pm.flags |= SHARPSL_SUSPENDED;
- flush_scheduled_work();
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
- else
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
- return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
- /* Clear the reset source indicators as they break the bootloader upon reboot */
- RCSR = 0x0f;
- sharpsl_average_clear();
- sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
- sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
- return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
- dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
- /* not charging and AC-IN! */
-
- if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
- dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
- sharpsl_off_charge_battery();
- }
-
- sharpsl_pm.machinfo->presuspend();
-
- PEDR = 0xffffffff; /* clear it */
-
- sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
- if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
- RTSR &= RTSR_ALE;
- RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
- sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
- } else if (alarm_enable) {
- RTSR &= RTSR_ALE;
- RTAR = alarm_time;
- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
- } else {
- dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
- }
-
- pxa_pm_enter(state);
-
- sharpsl_pm.machinfo->postsuspend();
-
- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
- {
- if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
- dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- if(sharpsl_off_charge_battery()) {
- dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
- }
-
- if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
- {
- dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
-
- return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
- unsigned long alarm_time = RTAR;
- unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
- dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
- corgi_goto_sleep(alarm_time, alarm_status, state);
-
- while (corgi_enter_suspend(alarm_time,alarm_status,state))
- {}
-
- if (sharpsl_pm.machinfo->earlyresume)
- sharpsl_pm.machinfo->earlyresume();
-
- dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
- return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
- int buff[5], temp, i, acin;
-
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
- /* Check AC-Adapter */
- acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- sharpsl_pm.machinfo->charge(0);
- udelay(100);
- sharpsl_pm.machinfo->discharge(1); /* enable discharge */
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery : check inserting battery ? */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- udelay(100);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.machinfo->discharge(0);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
- if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
- (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
- return -1;
- return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
- dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm_led(SHARPSL_LED_ERROR);
- sharpsl_pm.charge_mode = CHRG_ERROR;
- return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
- if (sharpsl_pm.charge_mode == CHRG_OFF) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
- /* AC Check */
- if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
- return sharpsl_off_charge_error();
-
- /* Start Charging */
- sharpsl_pm_led(SHARPSL_LED_ON);
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
-
- sharpsl_pm.charge_mode = CHRG_ON;
- sharpsl_pm.full_count = 0;
-
- return 1;
- } else if (sharpsl_pm.charge_mode != CHRG_ON) {
- return 1;
- }
-
- if (sharpsl_pm.full_count == 0) {
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
- if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
- return sharpsl_off_charge_error();
-
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.charge_mode = CHRG_ON;
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
- return 1;
- if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
- sharpsl_pm.full_count++;
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
- return 1;
- }
- }
- }
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
- if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
- sharpsl_pm.full_count = 0;
- }
- sharpsl_pm.full_count++;
- return 1;
- }
- if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
- sharpsl_pm_led(SHARPSL_LED_OFF);
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.charge_mode = CHRG_DONE;
- return 1;
- }
- }
-}
-#else
-#define sharpsl_pm_suspend NULL
-#define sharpsl_pm_resume NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
- info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- else
- info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
- info->battery_flag = (1 << info->battery_status);
- info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
- .enter = corgi_pxa_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (!pdev->dev.platform_data)
- return -EINVAL;
-
- sharpsl_pm.dev = &pdev->dev;
- sharpsl_pm.machinfo = pdev->dev.platform_data;
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags = 0;
-
- init_timer(&sharpsl_pm.ac_timer);
- sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
- init_timer(&sharpsl_pm.chrg_full_timer);
- sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
- led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
- sharpsl_pm.machinfo->init();
-
- ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
- ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
- if (ret != 0)
- dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
- apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
- suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
- suspend_set_ops(NULL);
-
- device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
- device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
- led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
- sharpsl_pm.machinfo->exit();
-
- del_timer_sync(&sharpsl_pm.chrg_full_timer);
- del_timer_sync(&sharpsl_pm.ac_timer);
-
- return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
- .probe = sharpsl_pm_probe,
- .remove = sharpsl_pm_remove,
- .suspend = sharpsl_pm_suspend,
- .resume = sharpsl_pm_resume,
- .driver = {
- .name = "sharpsl-pm",
- },
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
- return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da0843ead..d18d21bb41e4 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun 4 09:53:21 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
# CONFIG_CPU_PXA310 is not set
# CONFIG_CPU_PXA320 is not set
# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_CM_X300=y
# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
# CONFIG_PXA_EZX is not set
CONFIG_PXA3xx=y
# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
#
# Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_XSC3L2=y
CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -453,6 +474,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
# CONFIG_SND_PXA2XX_AC97 is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f69ca7..957fd5fa27ca 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
CONFIG_MACH_MAGICIAN=y
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
# CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45ebf7a4..16295cfd5e29 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
/*
* Interrupt numbers for PXA910
*/
+#define IRQ_PXA910_NONE (-1)
#define IRQ_PXA910_AIRQ 0
#define IRQ_PXA910_SSP3 1
#define IRQ_PXA910_SSP2 2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 2e914649b9e4..3b216bf41e7f 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -253,6 +253,10 @@
#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1)
#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1)
+/* I2C */
+#define GPIO105_CI2C_SDA MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
+
/* I2S */
#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
@@ -260,4 +264,27 @@
#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+/* PWM */
+#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index d97de36c50ad..bf1189ff9a34 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -159,4 +159,12 @@
#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+/* PWM */
+#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT MFP_CFG(GPIO120, AF2)
+
#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2076e9..6bf1f0eefcd1 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
+#include <linux/i2c.h>
#include <mach/devices.h>
+#include <plat/i2c.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
static inline int pxa168_add_uart(int id)
{
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+ struct i2c_board_info *info, unsigned size)
+{
+ struct pxa_device_desc *d = NULL;
+ int ret;
+
+ switch (id) {
+ case 0: d = &pxa168_device_twsi0; break;
+ case 1: d = &pxa168_device_twsi1; break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_register_board_info(id, info, size);
+ if (ret)
+ return ret;
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa168_device_pwm1; break;
+ case 2: d = &pxa168_device_pwm2; break;
+ case 3: d = &pxa168_device_pwm3; break;
+ case 4: d = &pxa168_device_pwm4; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, NULL, 0);
+}
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf574c36..6ae1ed7a0a9f 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
+#include <linux/i2c.h>
#include <mach/devices.h>
+#include <plat/i2c.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
static inline int pxa910_add_uart(int id)
{
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+ struct i2c_board_info *info, unsigned size)
+{
+ struct pxa_device_desc *d = NULL;
+ int ret;
+
+ switch (id) {
+ case 0: d = &pxa910_device_twsi0; break;
+ case 1: d = &pxa910_device_twsi1; break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_register_board_info(id, info, size);
+ if (ret)
+ return ret;
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa910_device_pwm1; break;
+ case 2: d = &pxa910_device_pwm2; break;
+ case 3: d = &pxa910_device_pwm3; break;
+ case 4: d = &pxa910_device_pwm4; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, NULL, 0);
+}
#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9dc2026..98ccbee4bd0c 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
#define APBC_PXA168_UART1 APBC_REG(0x000)
#define APBC_PXA168_UART2 APBC_REG(0x004)
#define APBC_PXA168_GPIO APBC_REG(0x008)
-#define APBC_PXA168_PWM0 APBC_REG(0x00c)
-#define APBC_PXA168_PWM1 APBC_REG(0x010)
+#define APBC_PXA168_PWM1 APBC_REG(0x00c)
+#define APBC_PXA168_PWM2 APBC_REG(0x010)
+#define APBC_PXA168_PWM3 APBC_REG(0x014)
+#define APBC_PXA168_PWM4 APBC_REG(0x018)
#define APBC_PXA168_SSP1 APBC_REG(0x01c)
#define APBC_PXA168_SSP2 APBC_REG(0x020)
#define APBC_PXA168_RTC APBC_REG(0x028)
@@ -48,10 +50,10 @@
#define APBC_PXA910_UART0 APBC_REG(0x000)
#define APBC_PXA910_UART1 APBC_REG(0x004)
#define APBC_PXA910_GPIO APBC_REG(0x008)
-#define APBC_PXA910_PWM0 APBC_REG(0x00c)
-#define APBC_PXA910_PWM1 APBC_REG(0x010)
-#define APBC_PXA910_PWM2 APBC_REG(0x014)
-#define APBC_PXA910_PWM3 APBC_REG(0x018)
+#define APBC_PXA910_PWM1 APBC_REG(0x00c)
+#define APBC_PXA910_PWM2 APBC_REG(0x010)
+#define APBC_PXA910_PWM3 APBC_REG(0x014)
+#define APBC_PXA910_PWM4 APBC_REG(0x018)
#define APBC_PXA910_SSP1 APBC_REG(0x01c)
#define APBC_PXA910_SSP2 APBC_REG(0x020)
#define APBC_PXA910_IPC APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae924468658c..71b1ae338753 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
};
static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7758bf..5882ca6b49fb 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
};
static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
*/
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd368a3..f4533f8ff4e8 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
select IWMMXT
select PXA_HAVE_BOARD_IRQS
+config MACH_STARGATE2
+ bool "Intel Stargate 2 Platform"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
+
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
select PXA3xx
select PXA_SSP
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
select PXA3xx
select CPU_PXA300
+config MACH_H4700
+ bool "HP iPAQ hx4700"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
help
Enable support for PXA2xx SSP ports
-config PXA_PWM
- tristate
- default BACKLIGHT_PWM
- help
- Enable support for PXA2xx/PXA3xx PWM controllers
-
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4e14b0..d18ffef44b8c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
-obj-$(CONFIG_PXA_PWM) += pwm.o
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba5f5fd..1d2cec25391d 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
cmx270_init_rtc();
cmx270_init_mmc();
cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1cb54a..465da26591bd 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
+#include <linux/rtc-v3020.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/setup.h>
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxa3xx_nand.h>
#include <asm/mach/map.h>
@@ -46,6 +48,11 @@
#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define GPIO95_RTC_CS (95)
+#define GPIO96_RTC_WR (96)
+#define GPIO97_RTC_RD (97)
+#define GPIO98_RTC_IO (98)
+
static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
+ /* RTC GPIOs */
+ GPIO95_GPIO, /* RTC CS */
+ GPIO96_GPIO, /* RTC WR */
+ GPIO97_GPIO, /* RTC RD */
+ GPIO98_GPIO, /* RTC IO */
+
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
+ .keep_config = 1,
.parts = cm_x300_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
};
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
static inline void cm_x300_init_i2c(void) {}
#endif
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+ .use_gpio = 1,
+ .gpio_cs = GPIO95_RTC_CS,
+ .gpio_wr = GPIO96_RTC_WR,
+ .gpio_rd = GPIO97_RTC_RD,
+ .gpio_io = GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+ .name = "v3020",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_v3020_pdata,
+ }
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+ platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
static void __init cm_x300_init(void)
{
/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
cm_x300_init_nand();
cm_x300_init_leds();
cm_x300_init_i2c();
+ cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks = 2;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (64*1024*1024);
+ mi->bank[1].start = 0xc0000000;
+ mi->bank[1].node = 0;
+ mi->bank[1].size = (64*1024*1024);
}
MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
+ .fixup = cm_x300_fixup,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364ccde9..962dda2e154a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
.wait_for_sync = corgi_wait_for_hsync,
};
-static void corgi_ads7846_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_ads7846_chip = {
- .cs_control = corgi_ads7846_cs,
+ .gpio_cs = CORGI_GPIO_ADS7846_CS,
};
static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
.kick_battery = corgi_bl_kick_battery,
};
-static void corgi_lcdcon_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
- .cs_control = corgi_lcdcon_cs,
+ .gpio_cs = CORGI_GPIO_LCDCON_CS,
};
-static void corgi_max1111_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_max1111_chip = {
- .cs_control = corgi_max1111_cs,
+ .gpio_cs = CORGI_GPIO_MAX1111_CS,
};
static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
static void __init corgi_init_spi(void)
{
- int err;
-
- err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
- if (err)
- return;
-
- err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
- if (err)
- goto err_free_1;
-
- err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
- if (err)
- goto err_free_2;
-
- gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
- gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
- gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
pxa2xx_set_spi_info(1, &corgi_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
- return;
-
-err_free_2:
- gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
- gpio_free(CORGI_GPIO_ADS7846_CS);
}
#else
static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a761d1..a093282fe4db 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
- sharpsl_pm_pxa_init();
}
static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.init = corgi_charger_init,
- .exit = sharpsl_pm_pxa_remove,
+ .exit = NULL,
.gpio_batlock = CORGI_GPIO_BAT_COVER,
.gpio_acin = CORGI_GPIO_AC_IN,
.gpio_batfull = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d851d49..3a8ee2272add 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
#include <mach/pxa2xx-regs.h>
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#define freq_debug 0
#endif
+static struct regulator *vcc_core;
+
static unsigned int pxa27x_maxfreq;
module_param(pxa27x_maxfreq, uint, 0);
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
unsigned int cccr;
unsigned int div2;
unsigned int cclkcfg;
+ int vmin;
+ int vmax;
} pxa_freqs_t;
/* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
static pxa_freqs_t pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
- {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
- {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
- {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
- {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
- {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
+ {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
+ {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
+ {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
+ {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
+ {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
};
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static pxa_freqs_t pxa255_turbo_freqs[] =
{
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
- {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
- {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
- {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
- {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
+ { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
+ {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
+ {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
+ {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
+ {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
};
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
((T) ? CCLKCFG_TURBO : 0))
static pxa_freqs_t pxa27x_freqs[] = {
- {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
- {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
- {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
- {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
- {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
- {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
- {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+ {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
};
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
extern unsigned get_clk_frequency_khz(int info);
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+ int ret = 0;
+ int vmin, vmax;
+
+ if (!cpu_is_pxa27x())
+ return 0;
+
+ vmin = pxa_freq->vmin;
+ vmax = pxa_freq->vmax;
+ if ((vmin == -1) || (vmax == -1))
+ return 0;
+
+ ret = regulator_set_voltage(vcc_core, vmin, vmax);
+ if (ret)
+ pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+ vmin, vmax);
+ return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+ vcc_core = regulator_get(NULL, "vcc_core");
+ if (IS_ERR(vcc_core)) {
+ pr_info("cpufreq: Didn't find vcc_core regulator\n");
+ vcc_core = NULL;
+ } else {
+ pr_info("cpufreq: Found vcc_core regulator\n");
+ }
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+ return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
pxa_freqs_t **pxa_freqs)
{
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
unsigned long flags;
unsigned int new_freq_cpu, new_freq_mem;
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+ int ret = 0;
/* Get the current policy */
find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));
+ if (vcc_core && freqs.new > freqs.old)
+ ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+ if (ret)
+ return ret;
/*
* Tell everyone what we're about to do...
* you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
*/
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ /*
+ * Even if voltage setting fails, we don't report it, as the frequency
+ * change succeeded. The voltage reduction is not a critical failure,
+ * only power savings will suffer from this.
+ *
+ * Note: if the voltage change fails, and a return value is returned, a
+ * bug is triggered (seems a deadlock). Should anybody find out where,
+ * the "return 0" should become a "return ret".
+ */
+ if (vcc_core && freqs.new < freqs.old)
+ ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
return 0;
}
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
+ pxa_cpufreq_init_voltages();
+
init_sdram_rows();
/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f83a61a..7d3e1b46e550 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/sm501.h>
+#include <linux/smsc911x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
{
.start = CSB726_IRQ_LAN,
.end = CSB726_IRQ_LAN,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
+struct smsc911x_platform_config csb726_lan_config = {
+ .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
static struct platform_device csb726_lan = {
- .name = "smc911x",
+ .name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(csb726_lan_resources),
.resource = csb726_lan_resources,
+ .dev = {
+ .platform_data = &csb726_lan_config,
+ },
};
static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
pxa27x_set_i2c_power_info(NULL);
pxa_set_mci_info(&csb726_mci);
pxa_set_ohci_info(&csb726_ohci_platform_data);
+ pxa_set_ac97_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d245e59c51b1..d3c3b7b025ae 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
@@ -287,7 +287,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
};
struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa2xx-i2c",
+ .name = "pxa3xx-pwri2c",
.id = 1,
.resource = pxa3xx_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73fbd4ca..243e0802b5f4 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
#include <media/soc_camera.h>
@@ -41,7 +43,7 @@
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/pxa2xx_spi.h>
@@ -52,23 +54,31 @@
#define GPIO13_MMC_CD (13)
#define GPIO95_MMC_WP (95)
#define GPIO56_NAND_RB (56)
+#define GPIO93_CAM_RESET (93)
+#define GPIO16_USB_HUB_RESET (16)
/* eXeda specific GPIOs */
#define GPIO114_MMC_CD (114)
#define GPIO20_NAND_RB (20)
#define GPIO38_SD_PWEN (38)
+#define GPIO37_WLAN_RST (37)
+#define GPIO95_TOUCHPAD_INT (95)
+#define GPIO130_CAM_RESET (130)
+#define GPIO10_USB_HUB_RESET (10)
/* common GPIOs */
#define GPIO11_NAND_CS (11)
-#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
+#define GPIO9_USB_VBUS_EN (9)
static int mmc_cd;
static int nand_rb;
static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
static unsigned long common_pin_config[] = {
/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
- GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
};
static unsigned long em_x270_pin_config[] = {
- GPIO13_GPIO, /* MMC card detect */
- GPIO56_GPIO, /* NAND Ready/Busy */
- GPIO95_GPIO, /* MMC Write protect */
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO16_GPIO, /* USB hub reset */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
+ GPIO95_GPIO, /* MMC Write protect */
};
static unsigned long exeda_pin_config[] = {
+ GPIO10_GPIO, /* USB hub reset */
GPIO20_GPIO, /* NAND Ready/Busy */
GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO95_GPIO, /* touchpad IRQ */
GPIO114_GPIO, /* MMC card detect */
};
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+ int err;
+
+ em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+ if (IS_ERR(em_x270_usb_ldo))
+ return PTR_ERR(em_x270_usb_ldo);
+
+ err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+ if (err)
+ goto err_free_usb_ldo;
+
+ err = gpio_request(usb_hub_reset, "hub rst");
+ if (err)
+ goto err_free_vbus_gpio;
+
+ /* USB Hub power-on and reset */
+ gpio_direction_output(usb_hub_reset, 0);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+ gpio_set_value(usb_hub_reset, 0);
+ regulator_disable(em_x270_usb_ldo);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+
+ /* enable VBUS */
+ gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+ return 0;
+
+err_free_vbus_gpio:
+ gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+ regulator_put(em_x270_usb_ldo);
+
+ return err;
+}
+
static int em_x270_ohci_init(struct device *dev)
{
+ int err;
+
+ /* we don't want to entirely disable USB if the HUB init failed */
+ err = em_x270_usb_hub_init();
+ if (err)
+ pr_err("USB Hub initialization failed: %d\n", err);
+
/* enable port 2 transiever */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
return 0;
}
+static void em_x270_ohci_exit(struct device *dev)
+{
+ gpio_free(usb_hub_reset);
+ gpio_free(GPIO9_USB_VBUS_EN);
+
+ if (!IS_ERR(em_x270_usb_ldo)) {
+ if (regulator_is_enabled(em_x270_usb_ldo))
+ regulator_disable(em_x270_usb_ldo);
+
+ regulator_put(em_x270_usb_ldo);
+ }
+}
+
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.init = em_x270_ohci_init,
+ .exit = em_x270_ohci_exit,
};
static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
if (err)
return err;
+ err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
+ goto err_free_pwen;
+
+ if (machine_is_exeda()) {
+ err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
+
+ gpio_direction_output(GPIO37_WLAN_RST, 1);
+ msleep(100);
+ }
+
gpio_direction_output(GPIO19_WLAN_STRAP, 1);
- mdelay(100);
+ msleep(100);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
gpio_direction_output(GPIO115_WLAN_PWEN, 0);
- mdelay(100);
+ msleep(100);
gpio_set_value(GPIO115_WLAN_PWEN, 1);
- mdelay(100);
+ msleep(100);
spi->bits_per_word = 16;
spi_setup(spi);
return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return err;
}
static int em_x270_libertas_teardown(struct spi_device *spi)
{
gpio_set_value(GPIO115_WLAN_PWEN, 0);
gpio_free(GPIO115_WLAN_PWEN);
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ if (machine_is_exeda()) {
+ gpio_set_value(GPIO37_WLAN_RST, 0);
+ gpio_free(GPIO37_WLAN_RST);
+ }
return 0;
}
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
{
int ret;
- ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ ret = gpio_request(cam_reset, "camera reset");
if (ret)
return ret;
- gpio_direction_output(GPIO93_CAM_RESET, 0);
+ gpio_direction_output(cam_reset, 0);
em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
if (em_x270_camera_ldo == NULL) {
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return -ENODEV;
}
ret = regulator_enable(em_x270_camera_ldo);
if (ret) {
regulator_put(em_x270_camera_ldo);
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return ret;
}
- gpio_set_value(GPIO93_CAM_RESET, 1);
+ gpio_set_value(cam_reset, 1);
return 0;
}
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (on == is_on)
return 0;
- gpio_set_value(GPIO93_CAM_RESET, !on);
+ gpio_set_value(cam_reset, !on);
if (on)
ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (ret)
return ret;
- gpio_set_value(GPIO93_CAM_RESET, on);
+ gpio_set_value(cam_reset, on);
return 0;
}
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
},
};
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
- .fast_mode = 1,
-};
-
static void __init em_x270_init_camera(void)
{
- pxa_set_i2c_info(&em_x270_i2c_info);
i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
}
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
};
struct power_supply_info em_x270_psy_info = {
- .name = "LP555597P6H-FPS",
+ .name = "battery",
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.voltage_max_design = 4200000,
.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
}
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+ .gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x21),
+ .platform_data = &exeda_gpio_ext_pdata,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+
+ if (machine_is_exeda())
+ i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
static void __init em_x270_module_init(void)
{
pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
mmc_cd = GPIO13_MMC_CD;
nand_rb = GPIO56_NAND_RB;
dm9000_flags = DM9000_PLATF_32BITONLY;
+ cam_reset = GPIO93_CAM_RESET;
+ usb_hub_reset = GPIO16_USB_HUB_RESET;
}
static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
mmc_cd = GPIO114_MMC_CD;
nand_rb = GPIO20_NAND_RB;
dm9000_flags = DM9000_PLATF_16BITONLY;
+ cam_reset = GPIO130_CAM_RESET;
+ usb_hub_reset = GPIO10_USB_HUB_RESET;
}
static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
if (machine_is_em_x270())
em_x270_module_init();
else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
- em_x270_init_camera();
em_x270_init_spi();
+ em_x270_init_i2c();
+ em_x270_init_camera();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 7db966dc29ce..588b265e5755 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -25,13 +26,19 @@
#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
#include "devices.h"
#include "generic.h"
+#define GPIO12_A780_FLIP_LID 12
+#define GPIO15_A1200_FLIP_LID 15
+#define GPIO15_A910_FLIP_LID 15
+#define GPIO12_E680_LOCK_SWITCH 12
+#define GPIO15_E6_LOCK_SWITCH 15
+
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
.lcd_conn = LCD_COLOR_TFT_18BPP,
};
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
&ezx_backlight_device,
};
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
#endif /* CONFIG_MACH_EZX_E2 */
#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO12_A780_FLIP_LID,
+ .active_low = 0,
+ .desc = "A780 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+ .buttons = a780_buttons,
+ .nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a780_gpio_keys_platform_data,
+ },
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+ &a780_gpio_keys,
+};
+
static void __init a780_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
pxa_set_keypad_info(&a780_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO12_E680_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E680 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+ .buttons = e680_buttons,
+ .nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e680_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata e680_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e680_devices[] __initdata = {
+ &e680_gpio_keys,
+};
+
static void __init e680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
pxa_set_keypad_info(&e680_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e680_devices));
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A1200_FLIP_LID,
+ .active_low = 0,
+ .desc = "A1200 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+ .buttons = a1200_buttons,
+ .nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a1200_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *a1200_devices[] __initdata = {
+ &a1200_gpio_keys,
+};
+
static void __init a1200_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
pxa_set_keypad_info(&a1200_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A910_FLIP_LID,
+ .active_low = 0,
+ .desc = "A910 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+ .buttons = a910_buttons,
+ .nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a910_gpio_keys_platform_data,
+ },
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+ &a910_gpio_keys,
+};
+
static void __init a910_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
pxa_set_keypad_info(&a910_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO15_E6_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E6 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+ .buttons = e6_buttons,
+ .nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e6_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata e6_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e6_devices[] __initdata = {
+ &e6_gpio_keys,
+};
+
static void __init e6_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
pxa_set_keypad_info(&e6_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e6_devices));
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e2_devices[] __initdata = {
+};
+
static void __init e2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
pxa_set_keypad_info(&e2_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e2_devices));
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 000000000000..7fff467e84fc
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ * Copyright (c) 2004 Hewlett-Packard Company.
+ * Copyright (c) 2005 SDG Systems, LLC
+ * Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS PXA_CS3_PHYS
+#define ASIC3_SD_PHYS (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2, /* W3220 */
+ GPIO79_nCS_3, /* ASIC3 */
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* EGPIO, WLAN */
+
+ /* PC CARD */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO85_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* FFUART (RS-232) */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* PWM 1 (Backlight) */
+ GPIO17_PWM1_OUT,
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO113_I2S_SYSCLK,
+
+ /* SSP 1 (NavPoint) */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP 2 (TSC2046) */
+ GPIO19_SSP2_SCLK,
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+ GPIO88_GPIO,
+
+ /* HX4700 specific input GPIOs */
+ GPIO12_GPIO, /* ASIC3_IRQ */
+ GPIO13_GPIO, /* W3220_IRQ */
+ GPIO14_GPIO, /* nWLAN_IRQ */
+
+ GPIO10_GPIO, /* GSM_IRQ */
+ GPIO13_GPIO, /* CPLD_IRQ */
+ GPIO107_GPIO, /* DS1WM_IRQ */
+ GPIO108_GPIO, /* GSM_READY */
+ GPIO58_GPIO, /* TSC2046_nPENIRQ */
+ GPIO66_GPIO, /* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+ { .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+ { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+ unsigned gpio : 8;
+ unsigned dir : 1;
+ unsigned init : 1;
+ char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+ int i, rc = 0;
+ int gpio;
+ int dir;
+
+ for (i = 0; (!rc) && (i < size); i++) {
+ gpio = gpios[i].gpio;
+ dir = gpios[i].dir;
+ rc = gpio_request(gpio, gpios[i].desc);
+ if (rc) {
+ pr_err("Error requesting GPIO %d(%s) : %d\n",
+ gpio, gpios[i].desc, rc);
+ continue;
+ }
+ if (dir)
+ gpio_direction_output(gpio, gpios[i].init);
+ else
+ gpio_direction_input(gpio);
+ }
+ while ((rc) && (--i >= 0))
+ gpio_free(gpios[i].gpio);
+ return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+ INIT_KEY(POWER, GPIO0_HX4700_nKEY_POWER, 1, "Power button"),
+ INIT_KEY(MAIL, GPIO94_HX4700_KEY_MAIL, 0, "Mail button"),
+ INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+ INIT_KEY(RECORD, GPIOD6_nKEY_RECORD, 1, "Record button"),
+ INIT_KEY(CALENDAR, GPIOD1_nKEY_CALENDAR, 1, "Calendar button"),
+ INIT_KEY(HOMEPAGE, GPIOD3_nKEY_HOME, 1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+ /* ASIC3 GPIO banks A and B along with some of C and D
+ implement the buffering for the CF slot. */
+ ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+ ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+ /* GPIOC - CF, LEDs, SD */
+ ASIC3_GPIOC0_LED0, /* red */
+ ASIC3_GPIOC1_LED1, /* green */
+ ASIC3_GPIOC2_LED2, /* blue */
+ ASIC3_GPIOC4_CF_nCD,
+ ASIC3_GPIOC5_nCIOW,
+ ASIC3_GPIOC6_nCIOR,
+ ASIC3_GPIOC7_nPCE_1,
+ ASIC3_GPIOC8_nPCE_2,
+ ASIC3_GPIOC9_nPOE,
+ ASIC3_GPIOC10_nPWE,
+ ASIC3_GPIOC11_PSKTSEL,
+ ASIC3_GPIOC12_nPREG,
+ ASIC3_GPIOC13_nPWAIT,
+ ASIC3_GPIOC14_nPIOIS16,
+ ASIC3_GPIOC15_nPIOR,
+
+ /* GPIOD: input GPIOs, CF */
+ ASIC3_GPIOD11_nCIOIS16,
+ ASIC3_GPIOD12_nCWAIT,
+ ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+ /* GPIO part */
+ [0] = {
+ .start = ASIC3_PHYS,
+ .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+ /* SD part */
+ [2] = {
+ .start = ASIC3_SD_PHYS,
+ .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+ .gpio_config = asic3_gpio_config,
+ .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+ .name = "asic3",
+ .id = -1,
+ .resource = asic3_resources,
+ .num_resources = ARRAY_SIZE(asic3_resources),
+ .dev = {
+ .platform_data = &asic3_platform_data,
+ },
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+ [0] = {
+ .start = PXA_CS5_PHYS,
+ .end = PXA_CS5_PHYS + 0x4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+ [0] = {
+ .reg_start = 0,
+ .gpio_base = HX4700_EGPIO_BASE,
+ .num_gpios = 8,
+ .direction = HTC_EGPIO_OUTPUT,
+ },
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+ .reg_width = 16,
+ .bus_width = 16,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
+ .dev = {
+ .platform_data = &egpio_info,
+ },
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+ gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ mdelay(20);
+
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+ mdelay(5);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+ /* FIXME: init w3220 registers here */
+
+ mdelay(5);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+ switch (level) {
+ case FB_BLANK_UNBLANK:
+ sony_lcd_init();
+ break;
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ sony_lcd_off();
+ break;
+ }
+ lcd_power = level;
+ return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+ return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+ .get_power = hx4700_lcd_get_power,
+ .set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+ sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+ sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume NULL
+#define w3220_lcd_suspend NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+ .suspend = w3220_lcd_suspend,
+ .resume = w3220_lcd_resume,
+};
+
+/* W3220_VGA QVGA */
+static struct w100_gen_regs w3220_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00abf003, /* 0x00fff003 */
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 15,
+ .right_margin = 16,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .crtc_ss = 0x00000000,
+ .crtc_ls = 0xa1ff01f9, /* 0x21ff01f9 */
+ .crtc_gs = 0xc0000000, /* 0x40000000 */
+ .crtc_vpos_gs = 0x0000028f,
+ .crtc_ps1_active = 0x00000000, /* 0x41060010 */
+ .crtc_rev = 0,
+ .crtc_dclk = 0x80000000,
+ .crtc_gclk = 0x040a0104,
+ .crtc_goe = 0,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x1a001545, /* 0x15001545 */
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+ .ext_mem_bw = 0x50413e01,
+ .offset = 0,
+ .ext_timing_ctl = 0x00043f7f,
+ .ext_cntl = 0x00000010,
+ .mode_reg = 0x00250000,
+ .io_cntl = 0x0fff0000,
+ .config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+ .init_data1 = 0xdfe00100, /* GPIO_DATA */
+ .gpio_dir1 = 0xffff0000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x00000000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+ .tg = &w3220_tg_info,
+ .mem = &w3220_mem_info,
+ .bm_mem = &w3220_bm_mem_info,
+ .gpio = &w3220_gpio_info,
+ .regs = &w3220_regs,
+ .modelist = w3220_modes,
+ .num_modes = 2,
+ .xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+ [0] = {
+ .start = ATI_W3220_PHYS,
+ .end = ATI_W3220_PHYS + 0x00ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device w3220 = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &w3220_info,
+ },
+ .num_resources = ARRAY_SIZE(w3220_resources),
+ .resource = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 200,
+ .dft_brightness = 100,
+ .pwm_period_ns = 30923,
+};
+
+static struct platform_device backlight = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &backlight_data,
+ },
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO76_HX4700_USBC_PUEN,
+ .gpio_vbus = GPIOD14_nUSBC_DETECT,
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .pressure_max = 512,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ .gpio_cs = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 2600000, /* 100 kHz sample rate */
+ .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .platform_data = &tsc2046_info,
+ .controller_data = &tsc2046_chip,
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+ .num_chipselect = 1,
+ .clock_enable = CKEN_SSP2,
+ .enable_dma = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+ return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+ "ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = hx4700_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = hx4700_supplicants,
+ .num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = gpio_to_irq(GPIOD9_nAC_IN),
+ .end = gpio_to_irq(GPIOD9_nAC_IN),
+ },
+ [1] = {
+ .name = "usb",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .end = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ },
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ {
+ .dev = &gpio_vbus.dev,
+ .supply = "vbus_draw",
+ },
+ {
+ .dev = &power_supply.dev,
+ .supply = "ac_draw",
+ },
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+ .gpio_nce = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ .gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "bq24022",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+ gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_128M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+ .set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+ .name = "hx4700-pcmcia",
+ .dev = {
+ .parent = &asic3.dev,
+ },
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &asic3,
+ &gpio_keys,
+ &backlight,
+ &w3220,
+ &egpio,
+ &bq24022,
+ &gpio_vbus,
+ &power_supply,
+ &strataflash,
+ &pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+ HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+ HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+ HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+ HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1, 1, "LCD_PC1"),
+ HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET, 1, "LCD_RESET"),
+ HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1, 1, "LCD_SLIN1"),
+ HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN, 1, "LCD_SQN"),
+ HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+ HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+ HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON, 1, "RS232_ON"),
+ HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET, 1, "ASIC3_nRESET"),
+ HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET, 1, "EUART_RESET"),
+ HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON, 1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+ hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ pxa_set_ficp_info(&ficp_info);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+ hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+ (void *)&w3220_info, &hx4700_lcd_ops);
+
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+ mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = hx4700_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2121309b2474..be7be72dace1 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO96_GPIO, /* accelerometer interrupt */
GPIO99_GPIO, /* ADC interrupt */
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+
/* Connector pins specified as gpios */
GPIO94_GPIO, /* large basic connector pin 14 */
GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO105_GPIO, /* blue led */
};
+static struct sht15_platform_data platform_data_sht15 = {
+ .gpio_data = 100,
+ .gpio_sck = 98,
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data_sht15,
+ },
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+ {
+ .dev = &sht15.dev,
+ .supply = "vcc",
+ },
+};
+
static struct gpio_led imote2_led_pins[] = {
{
.name = "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
.min_uV = 2800000,
.max_uV = 3000000,
},
+ .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+ .consumer_supplies = imote2_sensor_3_con,
},
[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
.constraints = {
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
.type = "tmp175",
.addr = 0x4A,
.irq = IRQ_GPIO(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
},
};
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
.num_chipselect = 1,
};
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
- gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
- gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
static struct pxa2xx_spi_chip staccel_chip_info = {
.tx_threshold = 8,
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi1control,
+ .gpio_cs = 24,
};
static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi3control,
+ .gpio_cs = 39,
};
static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
static struct platform_device *imote2_devices[] = {
&imote2_flash_device,
&imote2_leds,
+ &sht15,
};
static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
- gpio_direction_output(24, 0);
- gpio_direction_output(39, 0);
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 000000000000..9eaeed1f87f1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER 0
+#define GPIO12_HX4700_ASIC3_IRQ 12
+#define GPIO13_HX4700_W3220_IRQ 13
+#define GPIO14_HX4700_nWLAN_IRQ 14
+#define GPIO18_HX4700_RDY 18
+#define GPIO22_HX4700_LCD_RL 22
+#define GPIO27_HX4700_CODEC_ON 27
+#define GPIO32_HX4700_RS232_ON 32
+#define GPIO52_HX4700_CPU_nBATT_FAULT 52
+#define GPIO58_HX4700_TSC2046_nPENIRQ 58
+#define GPIO59_HX4700_LCD_PC1 59
+#define GPIO60_HX4700_CF_RNB 60
+#define GPIO61_HX4700_W3220_nRESET 61
+#define GPIO62_HX4700_LCD_nRESET 62
+#define GPIO63_HX4700_CPU_SS_nRESET 63
+#define GPIO65_HX4700_TSC2046_PEN_PU 65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ 66
+#define GPIO67_HX4700_EUART_PS 67
+#define GPIO70_HX4700_LCD_SLIN1 70
+#define GPIO71_HX4700_ASIC3_nRESET 71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN 72
+#define GPIO73_HX4700_LCD_UD_1 73
+#define GPIO75_HX4700_EARPHONE_nDET 75
+#define GPIO76_HX4700_USBC_PUEN 76
+#define GPIO81_HX4700_CPU_GP_nRESET 81
+#define GPIO82_HX4700_EUART_RESET 82
+#define GPIO83_HX4700_WLAN_nRESET 83
+#define GPIO84_HX4700_LCD_SQN 84
+#define GPIO85_HX4700_nPCE1 85
+#define GPIO88_HX4700_TSC2046_CS 88
+#define GPIO91_HX4700_FLASH_VPEN 91
+#define GPIO92_HX4700_HP_DRIVER 92
+#define GPIO93_HX4700_EUART_INT 93
+#define GPIO94_HX4700_KEY_MAIL 94
+#define GPIO95_HX4700_BATT_OFF 95
+#define GPIO96_HX4700_BQ24022_ISET2 96
+#define GPIO97_HX4700_nBL_DETECT 97
+#define GPIO99_HX4700_KEY_CONTACTS 99
+#define GPIO100_HX4700_AUTO_SENSE 100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON 102
+#define GPIO103_HX4700_SYNAPTICS_INT 103
+#define GPIO105_HX4700_nIR_ON 105
+#define GPIO106_HX4700_CPU_BT_nRESET 106
+#define GPIO107_HX4700_SPK_nSD 107
+#define GPIO109_HX4700_CODEC_nPDN 109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON 110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON 111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON 112
+#define GPIO114_HX4700_CF_RESET 114
+#define GPIO116_HX4700_CPU_HW_nRESET 116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE (HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE (HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED (GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN (GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE (GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS (GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD (GPIOC_BASE + 4) /* Input */
+#define GPIOC5_nCIOW (GPIOC_BASE + 5) /* Output, to CF */
+#define GPIOC6_nCIOR (GPIOC_BASE + 6) /* Output, to CF */
+#define GPIOC7_nPCE1 (GPIOC_BASE + 7) /* Input, from CPU */
+#define GPIOC8_nPCE2 (GPIOC_BASE + 8) /* Input, from CPU */
+#define GPIOC9_nPOE (GPIOC_BASE + 9) /* Input, from CPU */
+#define GPIOC10_CF_nPWE (GPIOC_BASE + 10) /* Input */
+#define GPIOC11_PSKTSEL (GPIOC_BASE + 11) /* Input, from CPU */
+#define GPIOC12_nPREG (GPIOC_BASE + 12) /* Input, from CPU */
+#define GPIOC13_nPWAIT (GPIOC_BASE + 13) /* Output, to CPU */
+#define GPIOC14_nPIOIS16 (GPIOC_BASE + 14) /* Output, to CPU */
+#define GPIOC15_nPIOR (GPIOC_BASE + 15) /* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT (GPIOD_BASE + 0) /* Input */
+#define GPIOD1_nKEY_CALENDAR (GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP (GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME (GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD (GPIOD_BASE + 4) /* Input, from CF */
+#define GPIOD5_nPIO (GPIOD_BASE + 5) /* Input */
+#define GPIOD6_nKEY_RECORD (GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT (GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD (GPIOD_BASE + 8) /* Input */
+#define GPIOD9_nAC_IN (GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ (GPIOD_BASE + 10) /* Input */
+#define GPIOD11_nCIOIS16 (GPIOD_BASE + 11) /* Input, from CF */
+#define GPIOD12_nCWAIT (GPIOD_BASE + 12) /* Input, from CF */
+#define GPIOD13_CF_RNB (GPIOD_BASE + 13) /* Input */
+#define GPIOD14_nUSBC_DETECT (GPIOD_BASE + 14)
+#define GPIOD15_nPIOW (GPIOD_BASE + 15) /* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN (HX4700_EGPIO_BASE + 0) /* WLAN support chip */
+#define EGPIO1_WL_VREG_EN (HX4700_EGPIO_BASE + 1) /* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN (HX4700_EGPIO_BASE + 2) /* unused */
+#define EGPIO3_SS_PWR_ON (HX4700_EGPIO_BASE + 3) /* smart slot power */
+#define EGPIO4_CF_3V3_ON (HX4700_EGPIO_BASE + 4) /* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON (HX4700_EGPIO_BASE + 5) /* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN (HX4700_EGPIO_BASE + 6) /* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN (HX4700_EGPIO_BASE + 7) /* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON (HX4700_EGPIO_BASE + 8) /* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2eb7f1..6a1d95993342 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
/*
- * The next 16 interrupts are for board specific purposes. Since
+ * The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these. There will be 16 IRQs by default. If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
+#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
+#endif
#define IRQ_SA1111_START (IRQ_BOARD_END)
#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
#define NR_IRQS (IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS (IRQ_BOARD_START + 32)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e61d05a..3ce4682eabb6 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD MFP_CFG_LPM(GPIO76, AF1, FLOAT)
#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS MFP_CFG_LPM(GPIO82, AF3, FLOAT)
#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI MFP_CFG_LPM(GPIO80, AF1, FLOAT)
#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
/* UART2 */
@@ -438,6 +449,9 @@
#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16 MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT MFP_CFG(GPIO8, AF3)
#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8a075f..fd8360c6839d 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
extern void pxa_cpu_resume(void);
extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
/* NOTE: this is for PM debugging on Lubbock, it's really a big
* ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16c2970..0b702693f458 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db22b981..1920dc6b05dc 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*
*/
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
struct sharpsl_charger_machinfo {
void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea95d11..b54749413e96 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
static inline void arch_decomp_setup(void)
{
if (machine_is_littleton() || machine_is_intelmote2()
- || machine_is_csb726())
+ || machine_is_csb726() || machine_is_stargate2()
+ || machine_is_cm_x300())
UART = STUART;
}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9feb4d4..55b3788fd1ae 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
+#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
#include "generic.h"
+#define GPIO_MMC1_CARD_DETECT mfp_to_gpio(MFP_PIN_GPIO15)
+
/* Littleton MFP configurations */
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
GPIO123_KP_MKOUT_2,
GPIO124_KP_MKOUT_3,
GPIO125_KP_MKOUT_4,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+ GPIO15_GPIO, /* card detect */
};
static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
.num_chipselect = 1,
};
-static void littleton_tdo24m_cs(u32 cmd)
-{
- gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
- .cs_control = littleton_tdo24m_cs,
+ .gpio_cs = LITTLETON_GPIO_LCD_CS,
};
static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
static void __init littleton_init_spi(void)
{
- int err;
-
- err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
- if (err) {
- pr_warning("failed to request GPIO for LCS CS\n");
- return;
- }
-
- gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
pxa2xx_set_spi_info(2, &littleton_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
}
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
static inline void littleton_init_keypad(void) {}
#endif
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+ irq_handler_t littleton_detect_int, void *data)
+{
+ int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+
+ gpio_direction_input(gpio_cd);
+
+ err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "mmc card detect", data);
+ if (err) {
+ dev_err(dev, "failed to request card detect IRQ\n");
+ goto err_request_irq;
+ }
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+ int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+ free_irq(gpio_to_irq(gpio_cd), data);
+ gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = littleton_mci_init,
+ .exit = littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+ pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
littleton_init_spi();
littleton_init_i2c();
+ littleton_init_mmc();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd94dc0..ca39669cffc5 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
#include <mach/pxa27x.h>
#include <mach/magician.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
};
/*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+ .fast_mode = 1,
+};
+
+/*
* Platform devices
*/
@@ -771,7 +779,7 @@ static void __init magician_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(devices));
err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
pxa_set_ficp_info(&magician_ficp_info);
}
pxa27x_set_i2c_power_info(NULL);
- pxa_set_i2c_info(NULL);
+ pxa_set_i2c_info(&i2c_info);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429e975f..f4dabf0273ca 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052ce0a05..4dc8c2ec40a9 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
arm_machine_restart('s', cmd);
}
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 2e65f05d366c..ed70f281dd09 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -532,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMLD_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmld_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -595,6 +583,7 @@ static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+ palmld_pm_init();
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 05bf979b78a6..aae64a12a734 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_udc_info,
+ },
};
/******************************************************************************
@@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMT5_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmt5_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
&palmt5_backlight,
&power_supply,
&palmt5_asoc,
+ &palmt5_gpio_vbus,
};
/* setup udc GPIOs initial state */
@@ -515,14 +512,15 @@ static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+ palmt5_pm_init();
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
pxa_set_ac97_info(&palmt5_ac97_pdata);
- pxa_set_udc_info(&palmt5_udc_info);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e86887..d823b09801df 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
GPIO1_RST, /* reset */
GPIO4_GPIO, /* Hotsync button */
GPIO9_GPIO, /* power detect */
+ GPIO15_GPIO, /* earphone detect */
GPIO37_GPIO, /* LCD power */
GPIO56_GPIO, /* Backlight power */
};
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
.gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_udc_info,
+ },
};
/******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
};
/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_asoc_pdata,
+ },
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
#endif
&palmte2_backlight,
&power_supply,
+ &palmte2_asoc,
+ &palmte2_gpio_vbus,
};
/* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
- pxa_set_udc_info(&palmte2_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e99a893c58a7..6c15d84bde53 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_udc_info,
+ },
};
/******************************************************************************
@@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMTX_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmtx_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
&palmtx_backlight,
&power_supply,
&palmtx_asoc,
+ &palmtx_gpio_vbus,
};
static struct map_desc palmtx_io_desc[] __initdata = {
@@ -548,11 +545,11 @@ static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+ palmtx_pm_init();
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
palmtx_udc_init();
pxa_set_ac97_info(&palmtx_ac97_pdata);
- pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a3132f..095521e9ee24 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
#include <media/soc_camera.h>
#include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174c8ead..7693355ee637 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
return -EINVAL;
}
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
{
int ret = 0;
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
return ret;
}
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
{
if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde4d221..ac431ed10399 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
.gpio_pendown = POODLE_GPIO_TP_INT,
};
-static void ads7846_cs(u32 command)
-{
- gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip poodle_ads7846_chip = {
- .cs_control = ads7846_cs,
+ .gpio_cs = POODLE_GPIO_TP_CS,
};
static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
static void __init poodle_init_spi(void)
{
- int err;
-
- err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
- if (err)
- return;
-
- gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
pxa2xx_set_spi_info(1, &poodle_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec71e657..ec68cc16b4e3 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
/*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+ switch (mode) {
+ case PWRMODE_SLEEP:
+ case PWRMODE_DEEPSLEEP:
+ pwrmode = mode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
* List of global PXA peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(PWRMODE_SLEEP);
+ pxa27x_cpu_suspend(pwrmode);
break;
}
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d4544dc95..6f678d93bf4e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
-/* &pxa_device_udc, The UDC driver is PXA25x only */
+ &pxa27x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff8239991430..8241a63ea589 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxafb.h>
#include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a76651..55259f4756c8 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
*
*/
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
/*
* SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
extern struct battery_thresh spitz_battery_levels_acin[];
extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
int sharpsl_pm_pxa_read_max1111(int channel);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec67e3b6..2546c066cd6e 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
#undef DEBUG
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
#include "sharpsl.h"
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
struct battery_thresh spitz_battery_levels_acin[] = {
{ 213, 100},
{ 212, 98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
#endif
}
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+ int i = sharpsl_pm.machinfo->bat_levels - 1;
+ int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+ struct battery_thresh *thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+ else
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+ while (i > 0 && (voltage > thresh[i].voltage))
+ i--;
+
+ return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+ int low_thresh, high_thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON) {
+ high_thresh = sharpsl_pm.machinfo->status_high_acin;
+ low_thresh = sharpsl_pm.machinfo->status_low_acin;
+ } else {
+ high_thresh = sharpsl_pm.machinfo->status_high_noac;
+ low_thresh = sharpsl_pm.machinfo->status_low_noac;
+ }
+
+ if (voltage >= high_thresh)
+ return APM_BATTERY_STATUS_HIGH;
+ if (voltage >= low_thresh)
+ return APM_BATTERY_STATUS_LOW;
+ return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+ int voltage, percent, apm_status, i = 0;
+
+ if (!sharpsl_pm.machinfo)
+ return;
+
+ sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+ /* Corgi cannot confirm when battery fully charged so periodically kick! */
+ if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+ && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
+ schedule_delayed_work(&toggle_charger, 0);
+
+ while(1) {
+ voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+ if (voltage > 0) break;
+ if (i++ > 5) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ break;
+ }
+ }
+
+ voltage = sharpsl_average_value(voltage);
+ apm_status = get_apm_status(voltage);
+ percent = get_percentage(voltage);
+
+ /* At low battery voltages, the voltage has a tendency to start
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ sharpsl_pm.battstat.mainbat_voltage = voltage;
+ sharpsl_pm.battstat.mainbat_status = apm_status;
+ sharpsl_pm.battstat.mainbat_percent = percent;
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+ sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+ /* If battery is low. limit backlight intensity to save power. */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+ (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+ if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+ sharpsl_pm.machinfo->backlight_limit(1);
+ sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+ }
+ } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+ sharpsl_pm.machinfo->backlight_limit(0);
+ sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+ }
+#endif
+
+ /* Suspend if critical battery level */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ dev_err(sharpsl_pm.dev, "Fatal Off\n");
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+ if (val == SHARPSL_LED_ERROR) {
+ dev_err(sharpsl_pm.dev, "Charging Error!\n");
+ } else if (val == SHARPSL_LED_ON) {
+ dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+ }
+}
+
+static void sharpsl_charge_on(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+ sharpsl_pm.full_count = 0;
+ sharpsl_pm.charge_mode = CHRG_ON;
+ schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.charge_mode = CHRG_OFF;
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
{
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+ dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ sharpsl_charge_off();
+ return;
+ } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+ sharpsl_charge_error();
+ return;
+ }
+
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+ int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+ sharpsl_average_clear();
+ if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+ sharpsl_charge_on();
+ else if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+ /* Delay the event slightly to debounce */
+ /* Must be a smaller delay than the chrg_full_isr below */
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+ dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+ sharpsl_pm.full_count++;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+ } else if (sharpsl_pm.full_count < 2) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else {
+ sharpsl_charge_off();
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+ }
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+ delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+ if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+ return IRQ_HANDLED;
+
+ /* delay until after any ac interrupt */
+ mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+ int is_fatal = 0;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+ dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+ dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM 10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+ sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+ int i, ad_val = 0;
+ static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+ if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+ sharpsl_ad_index = 0;
+ return ad;
+ }
+
+ sharpsl_ad[sharpsl_ad_index] = ad;
+ sharpsl_ad_index++;
+ if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+ for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ sharpsl_ad[i] = sharpsl_ad[i+1];
+ sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+ }
+ for (i=0; i < sharpsl_ad_index; i++)
+ ad_val += sharpsl_ad[i];
+
+ return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+ int i, j, k, temp, sum = 0;
+
+ /* Find MAX val */
+ temp = val[0];
+ j=0;
+ for (i=1; i<5; i++) {
+ if (temp < val[i]) {
+ temp = val[i];
+ j = i;
+ }
+ }
+
+ /* Find MIN val */
+ temp = val[4];
+ k=4;
+ for (i=3; i>=0; i--) {
+ if (temp > val[i]) {
+ temp = val[i];
+ k = i;
+ }
+ }
+
+ for (i=0; i<5; i++)
+ if (i != j && i != k )
+ sum += val[i];
+
+ dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+ return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+ int val, i, buff[5];
+
+ /* Check battery temperature */
+ for (i=0; i<5; i++) {
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ sharpsl_pm.machinfo->measure_temp(1);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+ sharpsl_pm.machinfo->measure_temp(0);
+ }
+
+ val = get_select_val(buff);
+
+ dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+ if (val > sharpsl_pm.machinfo->charge_on_temp) {
+ printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+ int val, i, buff[5];
+
+ /* disable charge, enable discharge */
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.machinfo->discharge(1);
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery voltage */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ sharpsl_pm.machinfo->discharge(0);
+
+ val = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+ if (val < sharpsl_pm.machinfo->charge_on_volt)
+ return -1;
+
+ return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+ int temp, i, buff[5];
+
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+ if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+ dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+ flush_scheduled_work();
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ else
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+ return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+ /* Clear the reset source indicators as they break the bootloader upon reboot */
+ RCSR = 0x0f;
+ sharpsl_average_clear();
+ sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+ sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+ return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ /* not charging and AC-IN! */
+
+ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+ dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+ sharpsl_off_charge_battery();
+ }
+
+ sharpsl_pm.machinfo->presuspend();
+
+ PEDR = 0xffffffff; /* clear it */
+
+ sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+ if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+ RTSR &= RTSR_ALE;
+ RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+ sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+ } else if (alarm_enable) {
+ RTSR &= RTSR_ALE;
+ RTAR = alarm_time;
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+ }
+
+ pxa_pm_enter(state);
+
+ sharpsl_pm.machinfo->postsuspend();
+
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+ {
+ if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+ dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ if(sharpsl_off_charge_battery()) {
+ dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+ }
+
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+ {
+ dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+ unsigned long alarm_time = RTAR;
+ unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+ corgi_goto_sleep(alarm_time, alarm_status, state);
+
+ while (corgi_enter_suspend(alarm_time,alarm_status,state))
+ {}
+
+ if (sharpsl_pm.machinfo->earlyresume)
+ sharpsl_pm.machinfo->earlyresume();
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+ return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+ int buff[5], temp, i, acin;
+
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+ /* Check AC-Adapter */
+ acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ sharpsl_pm.machinfo->charge(0);
+ udelay(100);
+ sharpsl_pm.machinfo->discharge(1); /* enable discharge */
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery : check inserting battery ? */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ udelay(100);
+ sharpsl_pm.machinfo->charge(1);
+ sharpsl_pm.machinfo->discharge(0);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+ if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+ (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+ return -1;
+ return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+ dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+ return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+ if (sharpsl_pm.charge_mode == CHRG_OFF) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+ return sharpsl_off_charge_error();
+
+ /* Start Charging */
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_mode = CHRG_ON;
+ sharpsl_pm.full_count = 0;
+
+ return 1;
+ } else if (sharpsl_pm.charge_mode != CHRG_ON) {
+ return 1;
+ }
+
+ if (sharpsl_pm.full_count == 0) {
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+ if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+ return sharpsl_off_charge_error();
+
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ sharpsl_pm.charge_mode = CHRG_ON;
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+ return 1;
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+ sharpsl_pm.full_count++;
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ return 1;
+ }
+ }
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+ if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+ sharpsl_pm.full_count = 0;
+ }
+ sharpsl_pm.full_count++;
+ return 1;
+ }
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ return 1;
+ }
+ }
+}
+#else
+#define sharpsl_pm_suspend NULL
+#define sharpsl_pm_resume NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+ info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ else
+ info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+ info->battery_flag = (1 << info->battery_status);
+ info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
+ .enter = corgi_pxa_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ sharpsl_pm.dev = &pdev->dev;
+ sharpsl_pm.machinfo = pdev->dev.platform_data;
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags = 0;
+
+ init_timer(&sharpsl_pm.ac_timer);
+ sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+ init_timer(&sharpsl_pm.chrg_full_timer);
+ sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+ sharpsl_pm.machinfo->init();
+
+ gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+ gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
}
if (sharpsl_pm.machinfo->batfull_irq)
{
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
}
+
+ ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+ ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+ if (ret != 0)
+ dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+ apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+ suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return 0;
}
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
{
+ suspend_set_ops(NULL);
+
+ device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+ device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
if (sharpsl_pm.machinfo->batfull_irq)
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+ gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+ gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+ if (sharpsl_pm.machinfo->exit)
+ sharpsl_pm.machinfo->exit();
+
+ del_timer_sync(&sharpsl_pm.chrg_full_timer);
+ del_timer_sync(&sharpsl_pm.ac_timer);
+
+ return 0;
}
+
+static struct platform_driver sharpsl_pm_driver = {
+ .probe = sharpsl_pm_probe,
+ .remove = sharpsl_pm_remove,
+ .suspend = sharpsl_pm_suspend,
+ .resume = sharpsl_pm_resume,
+ .driver = {
+ .name = "sharpsl-pm",
+ },
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+ return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe340a10..dda310fe71c8 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
#include <linux/mtd/sharpsl.h>
#include <asm/setup.h>
-#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
.wait_for_sync = spitz_wait_for_hsync,
};
-static void spitz_ads7846_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
- .cs_control = spitz_ads7846_cs,
+ .gpio_cs = SPITZ_GPIO_ADS7846_CS,
};
static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
.kick_battery = spitz_bl_kick_battery,
};
-static void spitz_lcdcon_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
- .cs_control = spitz_lcdcon_cs,
+ .gpio_cs = SPITZ_GPIO_LCDCON_CS,
};
-static void spitz_max1111_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_max1111_chip = {
- .cs_control = spitz_max1111_cs,
+ .gpio_cs = SPITZ_GPIO_MAX1111_CS,
};
static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
static void __init spitz_init_spi(void)
{
- int err;
-
- err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
- if (err)
- return;
-
- err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
- if (err)
- goto err_free_1;
-
- err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
- if (err)
- goto err_free_2;
-
- err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
- if (err)
- goto err_free_3;
- err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
- if (err)
- goto err_free_3;
- err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
- if (err)
- goto err_free_3;
-
if (machine_is_akita()) {
spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
- return;
-
-err_free_3:
- gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
- gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
- gpio_free(SPITZ_GPIO_ADS7846_CS);
}
#else
static inline void spitz_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e4490562c9e..724ffb030317 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
{
pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
- sharpsl_pm_pxa_init();
}
static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
struct sharpsl_charger_machinfo spitz_pm_machinfo = {
.init = spitz_charger_init,
- .exit = sharpsl_pm_pxa_remove,
+ .exit = NULL,
.gpio_batlock = SPITZ_GPIO_BAT_COVER,
.gpio_acin = SPITZ_GPIO_AC_IN,
.gpio_batfull = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 000000000000..3b205b69f3fb
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ * linux/arch/arm/mach-pxa/stargate2.c
+ *
+ * Author: Ed C. Epp
+ * Created: Nov 05, 2002
+ * Copyright: Intel Corp.
+ *
+ * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET 81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT 90
+#define SG2_SD_POWER_ENABLE 89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+ GPIO15_nCS_1, /* SRAM */
+ /* SMC91x */
+ GPIO80_nCS_4,
+ GPIO40_GPIO, /*cable detect?*/
+ /* Device Identification for wakeup*/
+ GPIO102_GPIO,
+
+ /* Button */
+ GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+ /* DA9030 */
+ GPIO1_GPIO,
+
+ /* Compact Flash */
+ GPIO79_PSKTSEL,
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO120_GPIO, /* Buff ctrl */
+ GPIO108_GPIO, /* Power ctrl */
+ GPIO82_GPIO, /* Reset */
+ GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO90_GPIO, /* nSD detect */
+ GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+ /* Bluetooth */
+ GPIO81_GPIO, /* reset */
+
+ /* cc2420 802.15.4 radio */
+ GPIO22_GPIO, /* CC_RSTN (out)*/
+ GPIO114_GPIO, /* CC_FIFO (in) */
+ GPIO116_GPIO, /* CC_CCA (in) */
+ GPIO0_GPIO, /* CC_FIFOP (in) */
+ GPIO16_GPIO, /* CCSFD (in) */
+ GPIO39_GPIO, /* CSn (out) */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP 3 - 802.15.4 radio */
+ GPIO39_GPIO, /* chip select */
+ GPIO34_SSP3_SCLK,
+ GPIO35_SSP3_TXD,
+ GPIO41_SSP3_RXD,
+
+ /* SSP 2 */
+ GPIO11_SSP2_RXD,
+ GPIO38_SSP2_TXD,
+ GPIO36_SSP2_SCLK,
+ GPIO37_GPIO, /* chip select */
+
+ /* SSP 1 */
+ GPIO26_SSP1_RXD,
+ GPIO25_SSP1_TXD,
+ GPIO23_SSP1_SCLK,
+ GPIO24_GPIO, /* chip select */
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
+
+ /* Connector pins specified as gpios */
+ GPIO94_GPIO, /* large basic connector pin 14 */
+ GPIO10_GPIO, /* large basic connector pin 23 */
+
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+ int err;
+ err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+ if (err) {
+ printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+ return err;
+ }
+ gpio_direction_output(SG2_BT_RESET, 1);
+ mdelay(5);
+ /* now reset it - 5 msec minimum */
+ gpio_set_value(SG2_BT_RESET, 0);
+ mdelay(10);
+ gpio_set_value(SG2_BT_RESET, 1);
+ gpio_free(SG2_BT_RESET);
+ return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+ {
+ .name = "sg2:red",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:blue",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:green",
+ .flags = DA9030_LED_RATE_ON,
+ },
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+ .gpio_data = 100,
+ .gpio_sck = 98,
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data_sht15,
+ },
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+ {
+ .dev = &sht15.dev,
+ .supply = "vcc",
+ },
+};
+
+enum stargate2_ldos{
+ vcc_vref,
+ vcc_cc2420,
+ /* a mote connector? */
+ vcc_mica,
+ /* the CSR bluecore chip */
+ vcc_bt,
+ /* The two voltages available to sensor boards */
+ vcc_sensor_1_8,
+ vcc_sensor_3,
+ /* directly connected to the pxa27x */
+ vcc_sram_ext,
+ vcc_pxa_pll,
+ vcc_pxa_usim, /* Reference voltage for certain gpios */
+ vcc_pxa_mem,
+ vcc_pxa_flash,
+ vcc_pxa_core, /*Dc-Dc buck not yet supported */
+ vcc_lcd,
+ vcc_bb,
+ vcc_bbio, /*not sure!*/
+ vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo. Unfortunately this information is
+ * not generally available. More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+ [vcc_bbio] = {
+ .constraints = { /* board default 1.8V */
+ .name = "vcc_bbio",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_bb] = {
+ .constraints = { /* board default 2.8V */
+ .name = "vcc_bb",
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ },
+ },
+ [vcc_pxa_flash] = {
+ .constraints = {/* default is 1.8V */
+ .name = "vcc_pxa_flash",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_cc2420] = { /* also vcc_io */
+ .constraints = {
+ /* board default is 2.8V */
+ .name = "vcc_cc2420",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_vref] = { /* Reference for what? */
+ .constraints = { /* default 1.8V */
+ .name = "vcc_vref",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sram_ext] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_sram_ext",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_mica] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_mica",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_bt] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_bt",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_lcd] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_lcd",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_io] = { /* Same or higher than everything
+ * bar vccbat and vccusb */
+ .constraints = { /* default 2.8V */
+ .name = "vcc_io",
+ .min_uV = 2692000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_sensor_1_8] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_sensor_1_8",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sensor_3] = { /* curiously default 2.8V */
+ .constraints = {
+ .name = "vcc_sensor_3",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+ .consumer_supplies = stargate2_sensor_3_con,
+ },
+ [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+ .constraints = {
+ .name = "vcc_pxa_pll",
+ .min_uV = 1170000,
+ .max_uV = 1430000,
+ },
+ },
+ [vcc_pxa_usim] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_usim",
+ .min_uV = 1710000,
+ .max_uV = 2160000,
+ },
+ },
+ [vcc_pxa_mem] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_mem",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_2,
+ .platform_data = &stargate2_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_3,
+ .platform_data = &stargate2_leds[2],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_4,
+ .platform_data = &stargate2_leds[1],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+ .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = (PXA_CS4_PHYS + 0x300),
+ .end = (PXA_CS4_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(40),
+ .end = IRQ_GPIO(40),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+ | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &stargate2_smc91x_info,
+ },
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+ irq_handler_t stargate2_detect_int,
+ void *data)
+{
+ int err;
+
+ err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+ if (err) {
+ printk(KERN_ERR "Can't get the gpio for SD power control");
+ goto return_err;
+ }
+ gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+ err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+ if (err) {
+ printk(KERN_ERR "Can't get the sd detect gpio");
+ goto free_power_en;
+ }
+ gpio_direction_input(SG2_GPIO_nSD_DETECT);
+ /* Delay to allow for full insertion */
+ stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+ stargate2_detect_int,
+ IRQ_TYPE_EDGE_BOTH,
+ "MMC card detect",
+ data);
+ if (err) {
+ printk(KERN_ERR "can't request MMC card detect IRQ\n");
+ goto free_nsd_detect;
+ }
+ return 0;
+
+ free_nsd_detect:
+ gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+ gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+ return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+ gpio_free(SG2_SD_POWER_ENABLE);
+ gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = stargate2_mci_init,
+ .setpower = stargate2_mci_setpower,
+ .exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00040000,
+ .mask_flags = 0
+ }, {
+ .name = "Filesystem",
+ .size = 0x01DC0000,
+ .offset = 0x00240000,
+ .mask_flags = 0
+ },
+};
+
+static struct resource flash_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = stargate2flash_partitions,
+ .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+ .name = "PXA27xOnChipROM",
+ .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &stargate2_flash_data,
+ },
+ .resource = &flash_resources,
+ .num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_32M-1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+ .mapname = "Stargate2 SRAM",
+ .bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = &sram_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &stargate2_sram_pdata,
+ },
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+ .gpio_base = 128,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+ .byte_len = 256,
+ .page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+ /* Techically this a pca9500 - but it's compatible with the 8574
+ * for gpio expansion and the 24c02 for eeprom access.
+ */
+ {
+ .type = "pcf8574",
+ .addr = 0x27,
+ .platform_data = &platform_data_pcf857x,
+ }, {
+ .type = "24c02",
+ .addr = 0x57,
+ .platform_data = &pca9500_eeprom_pdata,
+ }, {
+ .type = "max1238",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = IRQ_GPIO(96),
+ },
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &stargate2_da9030_pdata,
+ .irq = gpio_to_irq(1),
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+ .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "lis3l02dq",
+ .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &staccel_chip_info,
+ .irq = IRQ_GPIO(96),
+ }, {
+ .modalias = "cc2420",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .controller_data = &cc2420_info,
+ },
+};
+
+static void sg2_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+ break;
+ }
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+ .udc_is_connected = sg2_udc_detect,
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+ &stargate2_flash_device,
+ &stargate2_sram,
+ &smc91x_device,
+ &sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+ .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+ /* This is probably a board specific hack as this must be set
+ prior to connecting the MFP stuff up. */
+ MECR &= ~MECR_NOS;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+ /* spi chip selects */
+ gpio_direction_output(37, 0);
+ gpio_direction_output(24, 0);
+ gpio_direction_output(39, 0);
+
+ platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+ pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+ pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+ pxa_set_i2c_info(&i2c_pdata);
+
+ pxa_set_mci_info(&stargate2_mci_platform_data);
+
+ pxa_set_udc_info(&stargate2_udc_info);
+
+ stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = stargate2_init,
+ .boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a0bd46ef5d30..168267a5dfb3 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -40,7 +40,7 @@
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb70ae4..825f540176d2 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index dd031cc41847..d33c232b686c 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,7 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/regs-uart.h>
#include <mach/viper.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57642c0..cefd1c0a854a 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
#include <linux/gpio.h>
#include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266ecc06..000000000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001 SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x) ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
- int err;
-
- if (sharpsl_param.adadj != -1)
- ad_revise = sharpsl_param.adadj;
-
- /* Register interrupt handler. */
- if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
- "ACIN", sharpsl_ac_isr))) {
- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
- return;
- }
- if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
- "CO", sharpsl_chrg_full_isr))) {
- free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
- return;
- }
-
- gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
- gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
- ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
- COLLIE_TC35143_GPIO_BBAT_ON);
- return;
-}
-
-static void collie_measure_temp(int on)
-{
- if (on)
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- else
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
- /* Zaurus seems to contain LTC1731; it should know when to
- * stop charging itself, so setting charge on should be
- * relatively harmless (as long as it is not done too often).
- */
- gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
- return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
- return 0;
-}
-
-int collie_read_backup_battery(void)
-{
- int voltage;
-
- ucb1x00_adc_enable(ucb);
-
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
- ucb1x00_adc_disable(ucb);
-
- printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
- return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
- int voltage, voltage_rev, voltage_volts;
-
- ucb1x00_adc_enable(ucb);
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
- mdelay(1);
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
- ucb1x00_adc_disable(ucb);
-
- voltage_rev = voltage + ((ad_revise * voltage) / 652);
- voltage_volts = ADCtoPower(voltage_rev);
-
- printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
- if (voltage != -1)
- return voltage_volts;
- else
- return voltage;
-}
-
-int collie_read_temp(void)
-{
- int voltage;
-
- /* According to Sharp, temp must be > 973, main battery must be < 465,
- FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
- are way out of range? */
-
- ucb1x00_adc_enable(ucb);
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
- ucb1x00_adc_disable(ucb);
-
- printk("Battery temp = %d\n", voltage);
- return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
- switch (which) {
- case SHARPSL_BATT_VOLT:
- return collie_read_main_battery();
- case SHARPSL_BATT_TEMP:
- return collie_read_temp();
- case SHARPSL_ACIN_VOLT:
- return 500;
- case SHARPSL_STATUS_ACIN: {
- int ret = GPLR & COLLIE_GPIO_AC_IN;
- printk("AC status = %d\n", ret);
- return ret;
- }
- case SHARPSL_STATUS_FATAL: {
- int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
- printk("Fatal bat = %d\n", ret);
- return ret;
- }
- default:
- return ~0;
- }
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
- { 420, 100},
- { 417, 95},
- { 415, 90},
- { 413, 80},
- { 411, 75},
- { 408, 70},
- { 406, 60},
- { 403, 50},
- { 398, 40},
- { 391, 25},
- { 10, 5},
- { 0, 0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
- { 394, 100},
- { 390, 95},
- { 380, 90},
- { 370, 80},
- { 368, 75}, /* From sharp code: battery high with frontlight */
- { 366, 70}, /* 60..90 -- fake values invented by me for testing */
- { 364, 60},
- { 362, 50},
- { 360, 40},
- { 358, 25}, /* From sharp code: battery low with frontlight */
- { 356, 5}, /* From sharp code: battery verylow with frontlight */
- { 0, 0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
- .init = collie_charger_init,
- .read_devdata = read_devdata,
- .discharge = collie_discharge,
- .discharge1 = collie_discharge1,
- .charge = collie_charge,
- .measure_temp = collie_measure_temp,
- .presuspend = collie_presuspend,
- .postsuspend = collie_postsuspend,
- .charger_wakeup = collie_charger_wakeup,
- .should_wakeup = collie_should_wakeup,
- .bat_levels = 12,
- .bat_levels_noac = collie_battery_levels,
- .bat_levels_acin = collie_battery_levels_acin,
- .status_high_acin = 368,
- .status_low_acin = 358,
- .status_high_noac = 368,
- .status_low_noac = 358,
- .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */
- .charge_on_temp = 550,
- .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */
- .charge_acin_low = 450, /* ignored, too */
- .fatal_acin_volt = 356,
- .fatal_noacin_volt = 356,
-
- .batfull_irq = 1, /* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
- sharpsl_pm.machinfo = &collie_pm_machinfo;
- ucb = pdev->ucb;
- return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
- .add = collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
- int ret;
-
- collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
- if (!collie_pm_device)
- return -ENOMEM;
-
- collie_pm_device->dev.platform_data = &collie_pm_machinfo;
- ret = platform_device_add(collie_pm_device);
-
- if (ret)
- platform_device_put(collie_pm_device);
-
- if (!ret)
- ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
- return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
- ucb1x00_unregister_driver(&collie_pm_ucb_driver);
- platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7fbd48..0264bfb0ca4f 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y := dma.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e6ec0f..1a9f65e6ec0f 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374437a8..a9eabdcfa163 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
#include <asm/div64.h>
+#define HAS_SECONDARY_PWM 0x10
+#define PWM_ID_BASE(d) ((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+ /* PWM has_secondary_pwm? */
+ { "pxa25x-pwm", 0 },
+ { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+ { "pxa168-pwm", 1 },
+ { "pxa910-pwm", 1 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
/* PWM registers and bits definitions */
#define PWMCR (0x00)
#define PWMDCR (0x04)
@@ -31,7 +44,8 @@
struct pwm_device {
struct list_head node;
- struct platform_device *pdev;
+ struct pwm_device *secondary;
+ struct platform_device *pdev;
const char *label;
struct clk *clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
mutex_unlock(&pwm_lock);
}
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
- unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
{
- struct pwm_device *pwm;
+ struct platform_device_id *id = platform_get_device_id(pdev);
+ struct pwm_device *pwm, *secondary = NULL;
struct resource *r;
int ret = 0;
pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
if (pwm == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
}
pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
pwm->clk_enabled = 0;
pwm->use_count = 0;
- pwm->pwm_id = pwm_id;
+ pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
pwm->pdev = pdev;
- if (parent_pwm != NULL) {
- /* registers for the second PWM has offset of 0x10 */
- pwm->mmio_base = parent_pwm->mmio_base + 0x10;
- __add_pwm(pwm);
- return pwm;
- }
-
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
goto err_free_mem;
}
+ if (id->driver_data & HAS_SECONDARY_PWM) {
+ secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (secondary == NULL) {
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ *secondary = *pwm;
+ pwm->secondary = secondary;
+
+ /* registers for the second PWM has offset of 0x10 */
+ secondary->mmio_base = pwm->mmio_base + 0x10;
+ secondary->pwm_id = pdev->id + 2;
+ }
+
__add_pwm(pwm);
+ if (secondary)
+ __add_pwm(secondary);
+
platform_set_drvdata(pdev, pwm);
- return pwm;
+ return 0;
err_free_mem:
release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
clk_put(pwm->clk);
err_free:
kfree(pwm);
- return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwm;
-
- pwm = pwm_probe(pdev, pdev->id, NULL);
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- pwm = pwm_probe(pdev, pdev->id + 2, pwm);
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- return 0;
+ return ret;
}
static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
return -ENODEV;
mutex_lock(&pwm_lock);
+
+ if (pwm->secondary) {
+ list_del(&pwm->secondary->node);
+ kfree(pwm->secondary);
+ }
+
list_del(&pwm->node);
mutex_unlock(&pwm_lock);
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
.driver = {
.name = "pxa25x-pwm",
+ .owner = THIS_MODULE,
},
- .probe = pxa25x_pwm_probe,
- .remove = __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
- .driver = {
- .name = "pxa27x-pwm",
- },
- .probe = pxa27x_pwm_probe,
+ .probe = pwm_probe,
.remove = __devexit_p(pwm_remove),
+ .id_table = pwm_id_table,
};
static int __init pwm_init(void)
{
- int ret = 0;
-
- ret = platform_driver_register(&pxa25x_pwm_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
- return ret;
- }
-
- ret = platform_driver_register(&pxa27x_pwm_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
- return ret;
- }
-
- return ret;
+ return platform_driver_register(&pwm_driver);
}
arch_initcall(pwm_init);
static void __exit pwm_exit(void)
{
- platform_driver_unregister(&pxa25x_pwm_driver);
- platform_driver_unregister(&pxa27x_pwm_driver);
+ platform_driver_unregister(&pwm_driver);
}
module_exit(pwm_exit);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143d9655..035a6c7e59df 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0 (0 << 0)
+#define REG_SHIFT_1 (1 << 0)
+#define REG_SHIFT(d) ((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+ { "pxa2xx-i2c", REG_SHIFT_1 },
+ { "pxa3xx-pwri2c", REG_SHIFT_0 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
/*
* I2C registers and bit definitions
@@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
struct pxa_i2c *i2c;
struct resource *res;
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+ struct platform_device_id *id = platform_get_device_id(dev);
int ret;
int irq;
@@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
- i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+ i2c->reg_shift = REG_SHIFT(id->driver_data);
i2c->iobase = res->start;
i2c->iosize = res_len(res);
@@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
},
+ .id_table = i2c_pxa_id_table,
};
static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890e2903..f1f773b17fe1 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
defined(CONFIG_MACH_ZYLONITE) ||\
defined(CONFIG_MACH_LITTLETON) ||\
defined(CONFIG_MACH_ZYLONITE2) ||\
- defined(CONFIG_ARCH_VIPER)
+ defined(CONFIG_ARCH_VIPER) ||\
+ defined(CONFIG_MACH_STARGATE2)
#include <asm/mach-types.h>
@@ -73,7 +74,7 @@
/* We actually can't write halfwords properly if not word aligned */
static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
{
- if (machine_is_mainstone() && reg & 2) {
+ if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
unsigned int v = val << 16;
v |= readl(ioaddr + (reg & ~2)) & 0xffff;
writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 276473543982..fbf965b31c14 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCH_VIPER || ARCH_PXA_ESERIES)
+ || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac46327227..047394d98ac2 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 000000000000..490749ea677f
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created: December 6, 2005
+ * Author: Ed C. Epp
+ * Copyright: Intel Corp 2005
+ * Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL 120
+#define SG2_S0_POWER_CTL 108
+#define SG2_S0_GPIO_RESET 82
+#define SG2_S0_GPIO_DETECT 53
+#define SG2_S0_GPIO_READY 81
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+ state->ready = !!gpio_get_value(SG2_S0_GPIO_READY);
+ state->bvd1 = 0; /* not available - battery detect on card */
+ state->bvd2 = 0; /* not available */
+ state->vs_3v = 1; /* not available - voltage detect for card */
+ state->vs_Xv = 0; /* not available */
+ state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ /* Enable card power */
+ switch (state->Vcc) {
+ case 0:
+ /* sets power ctl register high */
+ gpio_set_value(SG2_S0_POWER_CTL, 1);
+ break;
+ case 33:
+ case 50:
+ /* sets power control register low (clear) */
+ gpio_set_value(SG2_S0_POWER_CTL, 0);
+ msleep(100);
+ break;
+ default:
+ pr_err("%s(): bad Vcc %u\n",
+ __func__, state->Vcc);
+ return -1;
+ }
+
+ /* reset */
+ gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+ return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = sg2_pcmcia_hw_init,
+ .hw_shutdown = sg2_pcmcia_hw_shutdown,
+ .socket_state = sg2_pcmcia_socket_state,
+ .configure_socket = sg2_pcmcia_configure_socket,
+ .socket_init = sg2_pcmcia_socket_init,
+ .socket_suspend = sg2_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_stargate2())
+ return -ENODEV;
+
+ sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!sg2_pcmcia_device)
+ return -ENOMEM;
+
+ ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+ if (ret)
+ goto error_put_platform_device;
+ ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+ if (ret)
+ goto error_free_gpio_buff_ctl;
+ ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+ if (ret)
+ goto error_free_gpio_power_ctl;
+ /* Set gpio directions */
+ gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+ gpio_direction_output(SG2_S0_POWER_CTL, 1);
+ gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+ ret = platform_device_add_data(sg2_pcmcia_device,
+ &sg2_pcmcia_ops,
+ sizeof(sg2_pcmcia_ops));
+ if (ret)
+ goto error_free_gpio_reset;
+
+ ret = platform_device_add(sg2_pcmcia_device);
+ if (ret)
+ goto error_free_gpio_reset;
+
+ return 0;
+error_free_gpio_reset:
+ gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+ gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+ gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+ platform_device_put(sg2_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+ platform_device_unregister(sg2_pcmcia_device);
+ gpio_free(SG2_S0_BUFF_CTL);
+ gpio_free(SG2_S0_POWER_CTL);
+ gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8083d862ebc5..b6c0239d8d29 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1759,6 +1759,16 @@ config FB_68328
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
+config FB_PXA168
+ tristate "PXA168/910 LCD framebuffer support"
+ depends on FB && (CPU_PXA168 || CPU_PXA910)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Marvell
+ MMP processor.
+
config FB_PXA
tristate "PXA LCD framebuffer support"
depends on FB && ARCH_PXA
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5151e3..01a819f47371 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE) += gbefb.o
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
+obj-$(CONFIG_FB_PXA168) += pxa168fb.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 000000000000..84d8327e47db
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ * 2009-02-16 adapted from original version for PXA168/910
+ * Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH 60 /* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+ /*
+ * Pseudocolor mode?
+ */
+ if (var->bits_per_pixel == 8)
+ return PIX_FMT_PSEUDOCOLOR;
+
+ /*
+ * Check for 565/1555.
+ */
+ if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+ var->green.length <= 6 && var->blue.length <= 5) {
+ if (var->transp.length == 0) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB565;
+ else
+ return PIX_FMT_BGR565;
+ }
+
+ if (var->transp.length == 1 && var->green.length <= 5) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB1555;
+ else
+ return PIX_FMT_BGR1555;
+ }
+
+ /* fall through */
+ }
+
+ /*
+ * Check for 888/A888.
+ */
+ if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+ var->green.length <= 8 && var->blue.length <= 8) {
+ if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB888PACK;
+ else
+ return PIX_FMT_BGR888PACK;
+ }
+
+ if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGBA888;
+ else
+ return PIX_FMT_BGRA888;
+ } else {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB888UNPACK;
+ else
+ return PIX_FMT_BGR888UNPACK;
+ }
+
+ /* fall through */
+ }
+
+ return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+ switch (pix_fmt) {
+ case PIX_FMT_RGB565:
+ var->bits_per_pixel = 16;
+ var->red.offset = 11; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_BGR565:
+ var->bits_per_pixel = 16;
+ var->red.offset = 0; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 11; var->blue.length = 5;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_RGB1555:
+ var->bits_per_pixel = 16;
+ var->red.offset = 10; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 5;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = 15; var->transp.length = 1;
+ break;
+ case PIX_FMT_BGR1555:
+ var->bits_per_pixel = 16;
+ var->red.offset = 0; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 5;
+ var->blue.offset = 10; var->blue.length = 5;
+ var->transp.offset = 15; var->transp.length = 1;
+ break;
+ case PIX_FMT_RGB888PACK:
+ var->bits_per_pixel = 24;
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_BGR888PACK:
+ var->bits_per_pixel = 24;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 16; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_RGBA888:
+ var->bits_per_pixel = 32;
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 24; var->transp.length = 8;
+ break;
+ case PIX_FMT_BGRA888:
+ var->bits_per_pixel = 32;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 16; var->blue.length = 8;
+ var->transp.offset = 24; var->transp.length = 8;
+ break;
+ case PIX_FMT_PSEUDOCOLOR:
+ var->bits_per_pixel = 8;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 0; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ }
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+ struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+ struct fb_info *info = fbi->info;
+
+ set_pix_fmt(var, pix_fmt);
+
+ var->xres = mode->xres;
+ var->yres = mode->yres;
+ var->xres_virtual = max(var->xres, var->xres_virtual);
+ if (ystretch)
+ var->yres_virtual = info->fix.smem_len /
+ (var->xres_virtual * (var->bits_per_pixel >> 3));
+ else
+ var->yres_virtual = max(var->yres, var->yres_virtual);
+ var->grayscale = 0;
+ var->accel_flags = FB_ACCEL_NONE;
+ var->pixclock = mode->pixclock;
+ var->left_margin = mode->left_margin;
+ var->right_margin = mode->right_margin;
+ var->upper_margin = mode->upper_margin;
+ var->lower_margin = mode->lower_margin;
+ var->hsync_len = mode->hsync_len;
+ var->vsync_len = mode->vsync_len;
+ var->sync = mode->sync;
+ var->vmode = FB_VMODE_NONINTERLACED;
+ var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ int pix_fmt;
+
+ /*
+ * Determine which pixel format we're going to use.
+ */
+ pix_fmt = determine_best_pix_fmt(var);
+ if (pix_fmt < 0)
+ return pix_fmt;
+ set_pix_fmt(var, pix_fmt);
+ fbi->pix_fmt = pix_fmt;
+
+ /*
+ * Basic geometry sanity checks.
+ */
+ if (var->xoffset + var->xres > var->xres_virtual)
+ return -EINVAL;
+ if (var->yoffset + var->yres > var->yres_virtual)
+ return -EINVAL;
+ if (var->xres + var->right_margin +
+ var->hsync_len + var->left_margin > 2048)
+ return -EINVAL;
+ if (var->yres + var->lower_margin +
+ var->vsync_len + var->upper_margin > 2048)
+ return -EINVAL;
+
+ /*
+ * Check size of framebuffer.
+ */
+ if (var->xres_virtual * var->yres_virtual *
+ (var->bits_per_pixel >> 3) > info->fix.smem_len)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ * clk2 = clk_in / integer_divider
+ * clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+ const struct fb_videomode *m)
+{
+ int divider_int;
+ int needed_pixclk;
+ u64 div_result;
+ u32 x = 0;
+
+ /*
+ * Notice: The field pixclock is used by linux fb
+ * is in pixel second. E.g. struct fb_videomode &
+ * struct fb_var_screeninfo
+ */
+
+ /*
+ * Check input values.
+ */
+ if (!m || !m->pixclock || !m->refresh) {
+ dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+ return;
+ }
+
+ /*
+ * Using PLL/AXI clock.
+ */
+ x = 0x80000000;
+
+ /*
+ * Calc divider according to refresh rate.
+ */
+ div_result = 1000000000000ll;
+ do_div(div_result, m->pixclock);
+ needed_pixclk = (u32)div_result;
+
+ divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+ /* check whether divisor is too small. */
+ if (divider_int < 2) {
+ dev_warn(fbi->dev, "Warning: clock source is too slow."
+ "Try smaller resolution\n");
+ divider_int = 2;
+ }
+
+ /*
+ * Set setting to reg.
+ */
+ x |= divider_int;
+ writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+ u32 x;
+
+ /*
+ * Set bit to enable graphics DMA.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+ x |= fbi->active ? 0x00000100 : 0;
+ fbi->active = 0;
+
+ /*
+ * If we are in a pseudo-color mode, we need to enable
+ * palette lookup.
+ */
+ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+ x |= 0x10000000;
+
+ /*
+ * Configure hardware pixel format.
+ */
+ x &= ~(0xF << 16);
+ x |= (fbi->pix_fmt >> 1) << 16;
+
+ /*
+ * Check red and blue pixel swap.
+ * 1. source data swap
+ * 2. panel output data swap
+ */
+ x &= ~(1 << 12);
+ x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+ writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+ u32 x;
+
+ /*
+ * Configure default bits: vsync triggers DMA, gated clock
+ * enable, power save enable, configure alpha registers to
+ * display 100% graphics, and set pixel command.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+ x |= 0x2032ff81;
+
+ /*
+ * We trigger DMA on the falling edge of vsync if vsync is
+ * active low, or on the rising edge if vsync is active high.
+ */
+ if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+ x |= 0x08000000;
+
+ writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int pixel_offset;
+ unsigned long addr;
+
+ pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+ addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+ writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+ u32 x;
+
+ /*
+ * Preserve enable flag.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+ x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+ x |= mi->gpio_output_data << 20;
+ x |= mi->gpio_output_mask << 12;
+ x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+ x |= mi->invert_composite_blank ? 0x00000040 : 0;
+ x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+ x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+ x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+ x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+ x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+ writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *v = &info->var;
+ int x;
+ int y;
+
+ x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+ y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+ writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_videomode mode;
+ u32 x;
+ struct pxa168fb_mach_info *mi;
+
+ mi = fbi->dev->platform_data;
+
+ /*
+ * Set additional mode info.
+ */
+ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ info->fix.ypanstep = var->yres;
+
+ /*
+ * Disable panel output while we setup the display.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+ writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+ /*
+ * Configure global panel parameters.
+ */
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+ /*
+ * convet var to video mode
+ */
+ fb_var_to_videomode(&mode, &info->var);
+
+ /* Calculate clock divisor. */
+ set_clock_divider(fbi, &mode);
+
+ /* Configure dma ctrl regs. */
+ set_dma_control0(fbi);
+ set_dma_control1(fbi, info->var.sync);
+
+ /*
+ * Configure graphics DMA parameters.
+ */
+ x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+ x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+ writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+ /*
+ * Configure dumb panel ctrl regs & timings.
+ */
+ set_dumb_panel_control(info);
+ set_dumb_screen_dimensions(info);
+
+ writel((var->left_margin << 16) | var->right_margin,
+ fbi->reg_base + LCD_SPU_H_PORCH);
+ writel((var->upper_margin << 16) | var->lower_margin,
+ fbi->reg_base + LCD_SPU_V_PORCH);
+
+ /*
+ * Re-enable panel output.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+ writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+ return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+ return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+ unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ u32 val;
+
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+ val = chan_to_field(red, &info->var.red);
+ val |= chan_to_field(green, &info->var.green);
+ val |= chan_to_field(blue , &info->var.blue);
+ fbi->pseudo_palette[regno] = val;
+ }
+
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+ val = to_rgb(red, green, blue);
+ writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+ writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+ }
+
+ return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+
+ fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+ set_dumb_panel_control(info);
+
+ return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ set_graphics_start(info, var->xoffset, var->yoffset);
+
+ return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+ struct pxa168fb_info *fbi = dev_id;
+ u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+ if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+ writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+ fbi->reg_base + SPU_IRQ_ISR);
+
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = pxa168fb_check_var,
+ .fb_set_par = pxa168fb_set_par,
+ .fb_setcolreg = pxa168fb_setcolreg,
+ .fb_blank = pxa168fb_blank,
+ .fb_pan_display = pxa168fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+ struct pxa168fb_mach_info *mi)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int ret = 0;
+ u32 total_w, total_h, refresh;
+ u64 div_result;
+ const struct fb_videomode *m;
+
+ /*
+ * Set default value
+ */
+ refresh = DEFAULT_REFRESH;
+
+ /* try to find best video mode. */
+ m = fb_find_best_mode(&info->var, &info->modelist);
+ if (m)
+ fb_videomode_to_var(&info->var, m);
+
+ /* Init settings. */
+ var->xres_virtual = var->xres;
+ var->yres_virtual = info->fix.smem_len /
+ (var->xres_virtual * (var->bits_per_pixel >> 3));
+ dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+ var->xres, var->yres);
+
+ /* correct pixclock. */
+ total_w = var->xres + var->left_margin + var->right_margin +
+ var->hsync_len;
+ total_h = var->yres + var->upper_margin + var->lower_margin +
+ var->vsync_len;
+
+ div_result = 1000000000000ll;
+ do_div(div_result, total_w * total_h * refresh);
+ var->pixclock = (u32)div_result;
+
+ return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+ struct pxa168fb_mach_info *mi;
+ struct fb_info *info = 0;
+ struct pxa168fb_info *fbi = 0;
+ struct resource *res;
+ struct clk *clk;
+ int irq, ret;
+
+ mi = pdev->dev.platform_data;
+ if (mi == NULL) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(&pdev->dev, "LCDCLK");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "unable to get LCDCLK");
+ return PTR_ERR(clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no IO memory defined\n");
+ return -ENOENT;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ defined\n");
+ return -ENOENT;
+ }
+
+ info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+ if (info == NULL) {
+ clk_put(clk);
+ return -ENOMEM;
+ }
+
+ /* Initialize private data */
+ fbi = info->par;
+ fbi->info = info;
+ fbi->clk = clk;
+ fbi->dev = info->dev = &pdev->dev;
+ fbi->panel_rbswap = mi->panel_rbswap;
+ fbi->is_blanked = 0;
+ fbi->active = mi->active;
+
+ /*
+ * Initialise static fb parameters.
+ */
+ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+ FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+ info->node = -1;
+ strlcpy(info->fix.id, mi->id, 16);
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type_aux = 0;
+ info->fix.xpanstep = 0;
+ info->fix.ypanstep = 0;
+ info->fix.ywrapstep = 0;
+ info->fix.mmio_start = res->start;
+ info->fix.mmio_len = res->end - res->start + 1;
+ info->fix.accel = FB_ACCEL_NONE;
+ info->fbops = &pxa168fb_ops;
+ info->pseudo_palette = fbi->pseudo_palette;
+
+ /*
+ * Map LCD controller registers.
+ */
+ fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+ if (fbi->reg_base == NULL) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ /*
+ * Allocate framebuffer memory.
+ */
+ info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+ info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+ &fbi->fb_start_dma, GFP_KERNEL);
+ if (info->screen_base == NULL) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+ /*
+ * Set video mode according to platform data.
+ */
+ set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+ fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+ /*
+ * init video mode data.
+ */
+ pxa168fb_init_mode(info, mi);
+
+ ret = pxa168fb_check_var(&info->var, info);
+ if (ret)
+ goto failed_free_fbmem;
+
+ /*
+ * Fill in sane defaults.
+ */
+ ret = pxa168fb_check_var(&info->var, info);
+ if (ret)
+ goto failed;
+
+ /*
+ * enable controller clock
+ */
+ clk_enable(fbi->clk);
+
+ pxa168fb_set_par(info);
+
+ /*
+ * Configure default register values.
+ */
+ writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+ writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+ writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+ writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+ writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+ writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+ fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+ /*
+ * Allocate color map.
+ */
+ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+ ret = -ENOMEM;
+ goto failed_free_clk;
+ }
+
+ /*
+ * Register irq handler.
+ */
+ ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+ info->fix.id, fbi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to request IRQ\n");
+ ret = -ENXIO;
+ goto failed_free_cmap;
+ }
+
+ /*
+ * Enable GFX interrupt
+ */
+ writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+ /*
+ * Register framebuffer.
+ */
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+ ret = -ENXIO;
+ goto failed_free_irq;
+ }
+
+ platform_set_drvdata(pdev, fbi);
+ return 0;
+
+failed_free_irq:
+ free_irq(irq, fbi);
+failed_free_cmap:
+ fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+ clk_disable(fbi->clk);
+failed_free_fbmem:
+ dma_free_coherent(fbi->dev, info->fix.smem_len,
+ info->screen_base, fbi->fb_start_dma);
+failed:
+ kfree(info);
+ clk_put(clk);
+
+ dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+ return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+ .driver = {
+ .name = "pxa168-fb",
+ .owner = THIS_MODULE,
+ },
+ .probe = pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+ return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+ "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 000000000000..eee09279c524
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define LCD_SPU_DMA_START_ADDR_Y0 0x00C0
+#define LCD_SPU_DMA_START_ADDR_U0 0x00C4
+#define LCD_SPU_DMA_START_ADDR_V0 0x00C8
+#define LCD_CFG_DMA_START_ADDR_0 0x00CC /* Cmd address */
+#define LCD_SPU_DMA_START_ADDR_Y1 0x00D0
+#define LCD_SPU_DMA_START_ADDR_U1 0x00D4
+#define LCD_SPU_DMA_START_ADDR_V1 0x00D8
+#define LCD_CFG_DMA_START_ADDR_1 0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC 0x00E0
+#define SPU_DMA_PITCH_C(c) ((c) << 16)
+#define SPU_DMA_PITCH_Y(y) (y)
+#define LCD_SPU_DMA_PITCH_UV 0x00E4
+#define SPU_DMA_PITCH_V(v) ((v) << 16)
+#define SPU_DMA_PITCH_U(u) (u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN 0x00E8
+#define CFG_DMA_OVSA_VLN(y) ((y) << 16) /* 0~0xfff */
+#define CFG_DMA_OVSA_HPXL(x) (x) /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN 0x00EC
+#define CFG_DMA_VLN(y) ((y) << 16)
+#define CFG_DMA_HPXL(x) (x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN 0x00F0
+#define CFG_DZM_VLN(y) ((y) << 16)
+#define CFG_DZM_HPXL(x) (x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0 0x00F4
+#define LCD_CFG_GRA_START_ADDR1 0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH 0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100
+#define CFG_GRA_OVSA_VLN(y) ((y) << 16)
+#define CFG_GRA_OVSA_HPXL(x) (x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN 0x0104
+#define CFG_GRA_VLN(y) ((y) << 16)
+#define CFG_GRA_HPXL(x) (x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN 0x0108
+#define CFG_GZM_VLN(y) ((y) << 16)
+#define CFG_GZM_HPXL(x) (x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN 0x010C
+#define CFG_HWC_OVSA_VLN(y) ((y) << 16)
+#define CFG_HWC_OVSA_HPXL(x) (x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN 0x0110
+#define CFG_HWC_VLN(y) ((y) << 16)
+#define CFG_HWC_HPXL(x) (x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL 0x0114
+#define CFG_V_TOTAL(y) ((y) << 16)
+#define CFG_H_TOTAL(x) (x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE 0x0118
+#define CFG_V_ACTIVE(y) ((y) << 16)
+#define CFG_H_ACTIVE(x) (x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH 0x011C
+#define CFG_H_BACK_PORCH(b) ((b) << 16)
+#define CFG_H_FRONT_PORCH(f) (f)
+#define LCD_SPU_V_PORCH 0x0120
+#define CFG_V_BACK_PORCH(b) ((b) << 16)
+#define CFG_V_FRONT_PORCH(f) (f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR 0x0124
+#define CFG_BLANKCOLOR_MASK 0x00FFFFFF
+#define CFG_BLANKCOLOR_R_MASK 0x000000FF
+#define CFG_BLANKCOLOR_G_MASK 0x0000FF00
+#define CFG_BLANKCOLOR_B_MASK 0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1 0x0128
+#define CFG_HWC_COLOR1 0x00FFFFFF
+#define CFG_HWC_COLOR1_R(red) ((red) << 16)
+#define CFG_HWC_COLOR1_G(green) ((green) << 8)
+#define CFG_HWC_COLOR1_B(blue) (blue)
+#define CFG_HWC_COLOR1_R_MASK 0x000000FF
+#define CFG_HWC_COLOR1_G_MASK 0x0000FF00
+#define CFG_HWC_COLOR1_B_MASK 0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2 0x012C
+#define CFG_HWC_COLOR2 0x00FFFFFF
+#define CFG_HWC_COLOR2_R_MASK 0x000000FF
+#define CFG_HWC_COLOR2_G_MASK 0x0000FF00
+#define CFG_HWC_COLOR2_B_MASK 0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y 0x0130
+#define CFG_CKEY_Y2(y2) ((y2) << 24)
+#define CFG_CKEY_Y2_MASK 0xFF000000
+#define CFG_CKEY_Y1(y1) ((y1) << 16)
+#define CFG_CKEY_Y1_MASK 0x00FF0000
+#define CFG_CKEY_Y(y) ((y) << 8)
+#define CFG_CKEY_Y_MASK 0x0000FF00
+#define CFG_ALPHA_Y(y) (y)
+#define CFG_ALPHA_Y_MASK 0x000000FF
+#define LCD_SPU_COLORKEY_U 0x0134
+#define CFG_CKEY_U2(u2) ((u2) << 24)
+#define CFG_CKEY_U2_MASK 0xFF000000
+#define CFG_CKEY_U1(u1) ((u1) << 16)
+#define CFG_CKEY_U1_MASK 0x00FF0000
+#define CFG_CKEY_U(u) ((u) << 8)
+#define CFG_CKEY_U_MASK 0x0000FF00
+#define CFG_ALPHA_U(u) (u)
+#define CFG_ALPHA_U_MASK 0x000000FF
+#define LCD_SPU_COLORKEY_V 0x0138
+#define CFG_CKEY_V2(v2) ((v2) << 24)
+#define CFG_CKEY_V2_MASK 0xFF000000
+#define CFG_CKEY_V1(v1) ((v1) << 16)
+#define CFG_CKEY_V1_MASK 0x00FF0000
+#define CFG_CKEY_V(v) ((v) << 8)
+#define CFG_CKEY_V_MASK 0x0000FF00
+#define CFG_ALPHA_V(v) (v)
+#define CFG_ALPHA_V_MASK 0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA 0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA 0x0144
+#define ISA_RXDATA_16BIT_1_DATA_MASK 0x000000FF
+#define ISA_RXDATA_16BIT_2_DATA_MASK 0x0000FF00
+#define ISA_RXDATA_16BIT_3_DATA_MASK 0x00FF0000
+#define ISA_RXDATA_16BIT_4_DATA_MASK 0xFF000000
+#define ISA_RXDATA_32BIT_1_DATA_MASK 0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT 0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT 0x015c
+#define CFG_GAMMA_RDDAT_MASK 0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT 0x0160
+#define CFG_PALETTE_RDDAT_MASK 0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN 0x0178
+#define CFG_IOPAD_IN_MASK 0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F 0x017C
+#define IRE_FRAME_CNT_MASK 0x000000C0
+#define IPE_FRAME_CNT_MASK 0x00000030
+#define GRA_FRAME_CNT_MASK 0x0000000C /* Graphic */
+#define DMA_FRAME_CNT_MASK 0x00000003 /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL 0x0180
+#define CFG_SCLKCNT(div) ((div) << 24) /* 0xFF~0x2 */
+#define CFG_SCLKCNT_MASK 0xFF000000
+#define CFG_RXBITS(rx) ((rx) << 16) /* 0x1F~0x1 */
+#define CFG_RXBITS_MASK 0x00FF0000
+#define CFG_TXBITS(tx) ((tx) << 8) /* 0x1F~0x1 */
+#define CFG_TXBITS_MASK 0x0000FF00
+#define CFG_CLKINV(clk) ((clk) << 7)
+#define CFG_CLKINV_MASK 0x00000080
+#define CFG_KEEPXFER(transfer) ((transfer) << 6)
+#define CFG_KEEPXFER_MASK 0x00000040
+#define CFG_RXBITSTO0(rx) ((rx) << 5)
+#define CFG_RXBITSTO0_MASK 0x00000020
+#define CFG_TXBITSTO0(tx) ((tx) << 4)
+#define CFG_TXBITSTO0_MASK 0x00000010
+#define CFG_SPI_ENA(spi) ((spi) << 3)
+#define CFG_SPI_ENA_MASK 0x00000008
+#define CFG_SPI_SEL(spi) ((spi) << 2)
+#define CFG_SPI_SEL_MASK 0x00000004
+#define CFG_SPI_3W4WB(wire) ((wire) << 1)
+#define CFG_SPI_3W4WB_MASK 0x00000002
+#define CFG_SPI_START(start) (start)
+#define CFG_SPI_START_MASK 0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA 0x0184
+
+/*
+ 1. Smart Pannel 8-bit Bus Control Register.
+ 2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL 0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0 0x0190
+#define CFG_NOBLENDING(nb) ((nb) << 31)
+#define CFG_NOBLENDING_MASK 0x80000000
+#define CFG_GAMMA_ENA(gn) ((gn) << 30)
+#define CFG_GAMMA_ENA_MASK 0x40000000
+#define CFG_CBSH_ENA(cn) ((cn) << 29)
+#define CFG_CBSH_ENA_MASK 0x20000000
+#define CFG_PALETTE_ENA(pn) ((pn) << 28)
+#define CFG_PALETTE_ENA_MASK 0x10000000
+#define CFG_ARBFAST_ENA(an) ((an) << 27)
+#define CFG_ARBFAST_ENA_MASK 0x08000000
+#define CFG_HWC_1BITMOD(mode) ((mode) << 26)
+#define CFG_HWC_1BITMOD_MASK 0x04000000
+#define CFG_HWC_1BITENA(mn) ((mn) << 25)
+#define CFG_HWC_1BITENA_MASK 0x02000000
+#define CFG_HWC_ENA(cn) ((cn) << 24)
+#define CFG_HWC_ENA_MASK 0x01000000
+#define CFG_DMAFORMAT(dmaformat) ((dmaformat) << 20)
+#define CFG_DMAFORMAT_MASK 0x00F00000
+#define CFG_GRAFORMAT(graformat) ((graformat) << 16)
+#define CFG_GRAFORMAT_MASK 0x000F0000
+/* for graphic part */
+#define CFG_GRA_FTOGGLE(toggle) ((toggle) << 15)
+#define CFG_GRA_FTOGGLE_MASK 0x00008000
+#define CFG_GRA_HSMOOTH(smooth) ((smooth) << 14)
+#define CFG_GRA_HSMOOTH_MASK 0x00004000
+#define CFG_GRA_TSTMODE(test) ((test) << 13)
+#define CFG_GRA_TSTMODE_MASK 0x00002000
+#define CFG_GRA_SWAPRB(swap) ((swap) << 12)
+#define CFG_GRA_SWAPRB_MASK 0x00001000
+#define CFG_GRA_SWAPUV(swap) ((swap) << 11)
+#define CFG_GRA_SWAPUV_MASK 0x00000800
+#define CFG_GRA_SWAPYU(swap) ((swap) << 10)
+#define CFG_GRA_SWAPYU_MASK 0x00000400
+#define CFG_YUV2RGB_GRA(cvrt) ((cvrt) << 9)
+#define CFG_YUV2RGB_GRA_MASK 0x00000200
+#define CFG_GRA_ENA(gra) ((gra) << 8)
+#define CFG_GRA_ENA_MASK 0x00000100
+/* for video part */
+#define CFG_DMA_FTOGGLE(toggle) ((toggle) << 7)
+#define CFG_DMA_FTOGGLE_MASK 0x00000080
+#define CFG_DMA_HSMOOTH(smooth) ((smooth) << 6)
+#define CFG_DMA_HSMOOTH_MASK 0x00000040
+#define CFG_DMA_TSTMODE(test) ((test) << 5)
+#define CFG_DMA_TSTMODE_MASK 0x00000020
+#define CFG_DMA_SWAPRB(swap) ((swap) << 4)
+#define CFG_DMA_SWAPRB_MASK 0x00000010
+#define CFG_DMA_SWAPUV(swap) ((swap) << 3)
+#define CFG_DMA_SWAPUV_MASK 0x00000008
+#define CFG_DMA_SWAPYU(swap) ((swap) << 2)
+#define CFG_DMA_SWAPYU_MASK 0x00000004
+#define CFG_DMA_SWAP_MASK 0x0000001C
+#define CFG_YUV2RGB_DMA(cvrt) ((cvrt) << 1)
+#define CFG_YUV2RGB_DMA_MASK 0x00000002
+#define CFG_DMA_ENA(video) (video)
+#define CFG_DMA_ENA_MASK 0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1 0x0194
+#define CFG_FRAME_TRIG(trig) ((trig) << 31)
+#define CFG_FRAME_TRIG_MASK 0x80000000
+#define CFG_VSYNC_TRIG(trig) ((trig) << 28)
+#define CFG_VSYNC_TRIG_MASK 0x70000000
+#define CFG_VSYNC_INV(inv) ((inv) << 27)
+#define CFG_VSYNC_INV_MASK 0x08000000
+#define CFG_COLOR_KEY_MODE(cmode) ((cmode) << 24)
+#define CFG_COLOR_KEY_MASK 0x07000000
+#define CFG_CARRY(carry) ((carry) << 23)
+#define CFG_CARRY_MASK 0x00800000
+#define CFG_LNBUF_ENA(lnbuf) ((lnbuf) << 22)
+#define CFG_LNBUF_ENA_MASK 0x00400000
+#define CFG_GATED_ENA(gated) ((gated) << 21)
+#define CFG_GATED_ENA_MASK 0x00200000
+#define CFG_PWRDN_ENA(power) ((power) << 20)
+#define CFG_PWRDN_ENA_MASK 0x00100000
+#define CFG_DSCALE(dscale) ((dscale) << 18)
+#define CFG_DSCALE_MASK 0x000C0000
+#define CFG_ALPHA_MODE(amode) ((amode) << 16)
+#define CFG_ALPHA_MODE_MASK 0x00030000
+#define CFG_ALPHA(alpha) ((alpha) << 8)
+#define CFG_ALPHA_MASK 0x0000FF00
+#define CFG_PXLCMD(pxlcmd) (pxlcmd)
+#define CFG_PXLCMD_MASK 0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL 0x0198
+#define CFG_SRAM_INIT_WR_RD(mode) ((mode) << 14)
+#define CFG_SRAM_INIT_WR_RD_MASK 0x0000C000
+#define CFG_SRAM_ADDR_LCDID(id) ((id) << 8)
+#define CFG_SRAM_ADDR_LCDID_MASK 0x00000F00
+#define CFG_SRAM_ADDR(addr) (addr)
+#define CFG_SRAM_ADDR_MASK 0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT 0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0 0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1 0x01A4
+#define CFG_CSB_256x32(hwc) ((hwc) << 15) /* HWC */
+#define CFG_CSB_256x32_MASK 0x00008000
+#define CFG_CSB_256x24(palette) ((palette) << 14) /* Palette */
+#define CFG_CSB_256x24_MASK 0x00004000
+#define CFG_CSB_256x8(gamma) ((gamma) << 13) /* Gamma */
+#define CFG_CSB_256x8_MASK 0x00002000
+#define CFG_PDWN256x32(pdwn) ((pdwn) << 7) /* HWC */
+#define CFG_PDWN256x32_MASK 0x00000080
+#define CFG_PDWN256x24(pdwn) ((pdwn) << 6) /* Palette */
+#define CFG_PDWN256x24_MASK 0x00000040
+#define CFG_PDWN256x8(pdwn) ((pdwn) << 5) /* Gamma */
+#define CFG_PDWN256x8_MASK 0x00000020
+#define CFG_PDWN32x32(pdwn) ((pdwn) << 3)
+#define CFG_PDWN32x32_MASK 0x00000008
+#define CFG_PDWN16x66(pdwn) ((pdwn) << 2)
+#define CFG_PDWN16x66_MASK 0x00000004
+#define CFG_PDWN32x66(pdwn) ((pdwn) << 1)
+#define CFG_PDWN32x66_MASK 0x00000002
+#define CFG_PDWN64x66(pdwn) (pdwn)
+#define CFG_PDWN64x66_MASK 0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV 0x01A8
+#define SCLK_SOURCE_SELECT(src) ((src) << 31)
+#define SCLK_SOURCE_SELECT_MASK 0x80000000
+#define CLK_FRACDIV(frac) ((frac) << 16)
+#define CLK_FRACDIV_MASK 0x0FFF0000
+#define CLK_INT_DIV(div) (div)
+#define CLK_INT_DIV_MASK 0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST 0x01AC
+#define CFG_BRIGHTNESS(bright) ((bright) << 16)
+#define CFG_BRIGHTNESS_MASK 0xFFFF0000
+#define CFG_CONTRAST(contrast) (contrast)
+#define CFG_CONTRAST_MASK 0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION 0x01B0
+#define CFG_C_MULTS(mult) ((mult) << 16)
+#define CFG_C_MULTS_MASK 0xFFFF0000
+#define CFG_SATURATION(sat) (sat)
+#define CFG_SATURATION_MASK 0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE 0x01B4
+#define CFG_SIN0(sin0) ((sin0) << 16)
+#define CFG_SIN0_MASK 0xFFFF0000
+#define CFG_COS0(con0) (con0)
+#define CFG_COS0_MASK 0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL 0x01B8
+#define CFG_DUMBMODE(mode) ((mode) << 28)
+#define CFG_DUMBMODE_MASK 0xF0000000
+#define CFG_LCDGPIO_O(data) ((data) << 20)
+#define CFG_LCDGPIO_O_MASK 0x0FF00000
+#define CFG_LCDGPIO_ENA(gpio) ((gpio) << 12)
+#define CFG_LCDGPIO_ENA_MASK 0x000FF000
+#define CFG_BIAS_OUT(bias) ((bias) << 8)
+#define CFG_BIAS_OUT_MASK 0x00000100
+#define CFG_REVERSE_RGB(rRGB) ((rRGB) << 7)
+#define CFG_REVERSE_RGB_MASK 0x00000080
+#define CFG_INV_COMPBLANK(blank) ((blank) << 6)
+#define CFG_INV_COMPBLANK_MASK 0x00000040
+#define CFG_INV_COMPSYNC(sync) ((sync) << 5)
+#define CFG_INV_COMPSYNC_MASK 0x00000020
+#define CFG_INV_HENA(hena) ((hena) << 4)
+#define CFG_INV_HENA_MASK 0x00000010
+#define CFG_INV_VSYNC(vsync) ((vsync) << 3)
+#define CFG_INV_VSYNC_MASK 0x00000008
+#define CFG_INV_HSYNC(hsync) ((hsync) << 2)
+#define CFG_INV_HSYNC_MASK 0x00000004
+#define CFG_INV_PCLK(pclk) ((pclk) << 1)
+#define CFG_INV_PCLK_MASK 0x00000002
+#define CFG_DUMB_ENA(dumb) (dumb)
+#define CFG_DUMB_ENA_MASK 0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL 0x01BC
+#define CFG_GRA_VM_ENA(vm) ((vm) << 15) /* gfx */
+#define CFG_GRA_VM_ENA_MASK 0x00008000
+#define CFG_DMA_VM_ENA(vm) ((vm) << 13) /* video */
+#define CFG_DMA_VM_ENA_MASK 0x00002000
+#define CFG_CMD_VM_ENA(vm) ((vm) << 13)
+#define CFG_CMD_VM_ENA_MASK 0x00000800
+#define CFG_CSC(csc) ((csc) << 8) /* csc */
+#define CFG_CSC_MASK 0x00000300
+#define CFG_AXICTRL(axi) ((axi) << 4)
+#define CFG_AXICTRL_MASK 0x000000F0
+#define CFG_IOPADMODE(iopad) (iopad)
+#define CFG_IOPADMODE_MASK 0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA 0x01C0
+#define DMA_FRAME_IRQ0_ENA(irq) ((irq) << 31)
+#define DMA_FRAME_IRQ0_ENA_MASK 0x80000000
+#define DMA_FRAME_IRQ1_ENA(irq) ((irq) << 30)
+#define DMA_FRAME_IRQ1_ENA_MASK 0x40000000
+#define DMA_FF_UNDERFLOW_ENA(ff) ((ff) << 29)
+#define DMA_FF_UNDERFLOW_ENA_MASK 0x20000000
+#define GRA_FRAME_IRQ0_ENA(irq) ((irq) << 27)
+#define GRA_FRAME_IRQ0_ENA_MASK 0x08000000
+#define GRA_FRAME_IRQ1_ENA(irq) ((irq) << 26)
+#define GRA_FRAME_IRQ1_ENA_MASK 0x04000000
+#define GRA_FF_UNDERFLOW_ENA(ff) ((ff) << 25)
+#define GRA_FF_UNDERFLOW_ENA_MASK 0x02000000
+#define VSYNC_IRQ_ENA(vsync_irq) ((vsync_irq) << 23)
+#define VSYNC_IRQ_ENA_MASK 0x00800000
+#define DUMB_FRAMEDONE_ENA(fdone) ((fdone) << 22)
+#define DUMB_FRAMEDONE_ENA_MASK 0x00400000
+#define TWC_FRAMEDONE_ENA(fdone) ((fdone) << 21)
+#define TWC_FRAMEDONE_ENA_MASK 0x00200000
+#define HWC_FRAMEDONE_ENA(fdone) ((fdone) << 20)
+#define HWC_FRAMEDONE_ENA_MASK 0x00100000
+#define SLV_IRQ_ENA(irq) ((irq) << 19)
+#define SLV_IRQ_ENA_MASK 0x00080000
+#define SPI_IRQ_ENA(irq) ((irq) << 18)
+#define SPI_IRQ_ENA_MASK 0x00040000
+#define PWRDN_IRQ_ENA(irq) ((irq) << 17)
+#define PWRDN_IRQ_ENA_MASK 0x00020000
+#define ERR_IRQ_ENA(irq) ((irq) << 16)
+#define ERR_IRQ_ENA_MASK 0x00010000
+#define CLEAN_SPU_IRQ_ISR(irq) (irq)
+#define CLEAN_SPU_IRQ_ISR_MASK 0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR 0x01C4
+#define DMA_FRAME_IRQ0(irq) ((irq) << 31)
+#define DMA_FRAME_IRQ0_MASK 0x80000000
+#define DMA_FRAME_IRQ1(irq) ((irq) << 30)
+#define DMA_FRAME_IRQ1_MASK 0x40000000
+#define DMA_FF_UNDERFLOW(ff) ((ff) << 29)
+#define DMA_FF_UNDERFLOW_MASK 0x20000000
+#define GRA_FRAME_IRQ0(irq) ((irq) << 27)
+#define GRA_FRAME_IRQ0_MASK 0x08000000
+#define GRA_FRAME_IRQ1(irq) ((irq) << 26)
+#define GRA_FRAME_IRQ1_MASK 0x04000000
+#define GRA_FF_UNDERFLOW(ff) ((ff) << 25)
+#define GRA_FF_UNDERFLOW_MASK 0x02000000
+#define VSYNC_IRQ(vsync_irq) ((vsync_irq) << 23)
+#define VSYNC_IRQ_MASK 0x00800000
+#define DUMB_FRAMEDONE(fdone) ((fdone) << 22)
+#define DUMB_FRAMEDONE_MASK 0x00400000
+#define TWC_FRAMEDONE(fdone) ((fdone) << 21)
+#define TWC_FRAMEDONE_MASK 0x00200000
+#define HWC_FRAMEDONE(fdone) ((fdone) << 20)
+#define HWC_FRAMEDONE_MASK 0x00100000
+#define SLV_IRQ(irq) ((irq) << 19)
+#define SLV_IRQ_MASK 0x00080000
+#define SPI_IRQ(irq) ((irq) << 18)
+#define SPI_IRQ_MASK 0x00040000
+#define PWRDN_IRQ(irq) ((irq) << 17)
+#define PWRDN_IRQ_MASK 0x00020000
+#define ERR_IRQ(irq) ((irq) << 16)
+#define ERR_IRQ_MASK 0x00010000
+/* read-only */
+#define DMA_FRAME_IRQ0_LEVEL_MASK 0x00008000
+#define DMA_FRAME_IRQ1_LEVEL_MASK 0x00004000
+#define DMA_FRAME_CNT_ISR_MASK 0x00003000
+#define GRA_FRAME_IRQ0_LEVEL_MASK 0x00000800
+#define GRA_FRAME_IRQ1_LEVEL_MASK 0x00000400
+#define GRA_FRAME_CNT_ISR_MASK 0x00000300
+#define VSYNC_IRQ_LEVEL_MASK 0x00000080
+#define DUMB_FRAMEDONE_LEVEL_MASK 0x00000040
+#define TWC_FRAMEDONE_LEVEL_MASK 0x00000020
+#define HWC_FRAMEDONE_LEVEL_MASK 0x00000010
+#define SLV_FF_EMPTY_MASK 0x00000008
+#define DMA_FF_ALLEMPTY_MASK 0x00000004
+#define GRA_FF_ALLEMPTY_MASK 0x00000002
+#define PWRDN_IRQ_LEVEL_MASK 0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565 0x0
+#define VMODE_RGB1555 0x1
+#define VMODE_RGB888PACKED 0x2
+#define VMODE_RGB888UNPACKED 0x3
+#define VMODE_RGBA888 0x4
+#define VMODE_YUV422PACKED 0x5
+#define VMODE_YUV422PLANAR 0x6
+#define VMODE_YUV420PLANAR 0x7
+#define VMODE_SMPNCMD 0x8
+#define VMODE_PALETTE4BIT 0x9
+#define VMODE_PALETTE8BIT 0xa
+#define VMODE_RESERVED 0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565 0x0
+#define GMODE_RGB1555 0x1
+#define GMODE_RGB888PACKED 0x2
+#define GMODE_RGB888UNPACKED 0x3
+#define GMODE_RGBA888 0x4
+#define GMODE_YUV422PACKED 0x5
+#define GMODE_YUV422PLANAR 0x6
+#define GMODE_YUV420PLANAR 0x7
+#define GMODE_SMPNCMD 0x8
+#define GMODE_PALETTE4BIT 0x9
+#define GMODE_PALETTE8BIT 0xa
+#define GMODE_RESERVED 0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG 31 /* bit location */
+#define DMA1_VSYNC_MODE 28
+#define DMA1_VSYNC_INV 27
+#define DMA1_CKEY 24
+#define DMA1_CARRY 23
+#define DMA1_LNBUF_ENA 22
+#define DMA1_GATED_ENA 21
+#define DMA1_PWRDN_ENA 20
+#define DMA1_DSCALE 18
+#define DMA1_ALPHA_MODE 16
+#define DMA1_ALPHA 08
+#define DMA1_PXLCMD 00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0 0x0
+#define DUMB16_RGB565_1 0x1
+#define DUMB18_RGB666_0 0x2
+#define DUMB18_RGB666_1 0x3
+#define DUMB12_RGB444_0 0x4
+#define DUMB12_RGB444_1 0x5
+#define DUMB24_RGB888_0 0x6
+#define DUMB_BLANK 0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24 0x0
+#define IOPAD_DUMB18SPI 0x1
+#define IOPAD_DUMB18GPIO 0x2
+#define IOPAD_DUMB16SPI 0x3
+#define IOPAD_DUMB16GPIO 0x4
+#define IOPAD_DUMB12 0x5
+#define IOPAD_SMART18SPI 0x6
+#define IOPAD_SMART16SPI 0x7
+#define IOPAD_SMART8BOTH 0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 000000000000..b5cc72fe0461
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24 0
+#define PIN_MODE_DUMB_18_SPI 1
+#define PIN_MODE_DUMB_18_GPIO 2
+#define PIN_MODE_DUMB_16_SPI 3
+#define PIN_MODE_DUMB_16_GPIO 4
+#define PIN_MODE_DUMB_12_SPI_GPIO 5
+#define PIN_MODE_SMART_18_SPI 6
+#define PIN_MODE_SMART_16_SPI 7
+#define PIN_MODE_SMART_8_SPI_GPIO 8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565 0
+#define DUMB_MODE_RGB565_UPPER 1
+#define DUMB_MODE_RGB666 2
+#define DUMB_MODE_RGB666_UPPER 3
+#define DUMB_MODE_RGB444 4
+#define DUMB_MODE_RGB444_UPPER 5
+#define DUMB_MODE_RGB888 6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE (800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565 0
+#define PIX_FMT_BGR565 1
+#define PIX_FMT_RGB1555 2
+#define PIX_FMT_BGR1555 3
+#define PIX_FMT_RGB888PACK 4
+#define PIX_FMT_BGR888PACK 5
+#define PIX_FMT_RGB888UNPACK 6
+#define PIX_FMT_BGR888UNPACK 7
+#define PIX_FMT_RGBA888 8
+#define PIX_FMT_BGRA888 9
+#define PIX_FMT_YUV422PACK 10
+#define PIX_FMT_YVU422PACK 11
+#define PIX_FMT_YUV422PLANAR 12
+#define PIX_FMT_YVU422PLANAR 13
+#define PIX_FMT_YUV420PLANAR 14
+#define PIX_FMT_YVU420PLANAR 15
+#define PIX_FMT_PSEUDOCOLOR 20
+#define PIX_FMT_UYVY422PACK (0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+ struct device *dev;
+ struct clk *clk;
+ struct fb_info *info;
+
+ void __iomem *reg_base;
+ dma_addr_t fb_start_dma;
+ u32 pseudo_palette[16];
+
+ int pix_fmt;
+ unsigned is_blanked:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+ char id[16];
+
+ int num_modes;
+ struct fb_videomode *modes;
+
+ /*
+ * Pix_fmt
+ */
+ unsigned pix_fmt;
+
+ /*
+ * I/O pin allocation.
+ */
+ unsigned io_pin_allocation_mode:4;
+
+ /*
+ * Dumb panel -- assignment of R/G/B component info to the 24
+ * available external data lanes.
+ */
+ unsigned dumb_mode:4;
+ unsigned panel_rgb_reverse_lanes:1;
+
+ /*
+ * Dumb panel -- GPIO output data.
+ */
+ unsigned gpio_output_mask:8;
+ unsigned gpio_output_data:8;
+
+ /*
+ * Dumb panel -- configurable output signal polarity.
+ */
+ unsigned invert_composite_blank:1;
+ unsigned invert_pix_val_ena:1;
+ unsigned invert_pixclock:1;
+ unsigned invert_vsync:1;
+ unsigned invert_hsync:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+ unsigned enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index ad8a10fe6298..96b2699abf61 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -98,13 +98,14 @@ config SND_PXA2XX_SOC_EM_X270
CompuLab EM-x270.
config SND_PXA2XX_SOC_PALM27X
- bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
- depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+ bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+ depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+ MACH_PALMT5 || MACH_PALMTE2)
select SND_PXA2XX_SOC_AC97
select SND_SOC_WM9712
help
Say Y if you want to add support for SoC audio on
- Palm T|X, T5 or LifeDrive handheld computer.
+ Palm T|X, T5, E2 or LifeDrive handheld computer.
config SND_SOC_ZYLONITE
tristate "SoC Audio support for Marvell Zylonite"
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e01e08..e6102fda0a7f 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
int ret;
if (!(machine_is_palmtx() || machine_is_palmt5() ||
- machine_is_palmld()))
+ machine_is_palmld() || machine_is_palmte2()))
return -ENODEV;
if (pdev->dev.platform_data)