summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/SubmittingPatches46
-rw-r--r--arch/mips/au1000/common/clocks.c1
-rw-r--r--arch/mips/au1000/common/dbdma.c11
-rw-r--r--arch/mips/kernel/Makefile1
-rw-r--r--arch/mips/kernel/traps.c16
-rw-r--r--arch/mips/mips-boards/generic/time.c19
-rw-r--r--arch/mips/mm/page.c10
-rw-r--r--arch/mips/mm/tlbex.c3
-rw-r--r--arch/mips/pci/ops-bridge.c20
-rw-r--r--arch/mips/pci/pci-ip27.c8
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c22
-rw-r--r--arch/mips/sgi-ip27/ip27-memory.c117
-rw-r--r--arch/mips/sgi-ip27/ip27-smp.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c27
-rw-r--r--arch/x86/Kconfig.debug20
-rw-r--r--drivers/ata/libata-sff.c2
-rw-r--r--drivers/block/brd.c1
-rw-r--r--drivers/mtd/maps/omap_nor.c2
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c2
-rw-r--r--drivers/mtd/onenand/generic.c2
-rw-r--r--drivers/pnp/system.c2
-rw-r--r--fs/cifs/asn1.c14
-rw-r--r--include/asm-frv/checksum.h2
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx_dbdma.h1
-rw-r--r--include/asm-mips/mipsregs.h3
-rw-r--r--include/asm-mips/pgtable.h3
-rw-r--r--include/asm-mips/rtlx.h2
-rw-r--r--net/ipv4/netfilter/nf_nat_snmp_basic.c14
28 files changed, 194 insertions, 182 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9c93a03ea33b..118ca6e9404f 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -327,6 +327,52 @@ Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+ [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+ Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+ Date: Tue May 13 19:10:30 2008 +0000
+
+ SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+ commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+ Date: Tue May 13 22:12:27 2008 +0200
+
+ wireless, airo: waitbusy() won't delay
+
+ [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
13) When to use Acked-by: and Cc:
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 46f8ee0e2657..043429d17c5f 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void)
{
return au1x00_clock;
}
+EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 42d555236de1..601ee9180ee4 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
+void au1xxx_ddma_del_device(u32 devid)
+{
+ dbdev_tab_t *p = find_dbdev_id(devid);
+
+ if (p != NULL) {
+ memset(p, 0, sizeof(dbdev_tab_t));
+ p->dev_id = ~0;
+ }
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
/* Allocate a channel and return a non-zero descriptor if successful. */
u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index cc0244036aec..65e46a6d4178 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb8b0e2c7954..f9165d1a17bf 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29)
#ifdef CONFIG_KALLSYMS
printk("\n");
#endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
- if (IS_KVA01(sp)) {
- while (!kstack_end(sp)) {
- addr = *sp++;
- if (__kernel_text_address(addr))
- print_ip_sym(addr);
+ while (!kstack_end(sp)) {
+ unsigned long __user *p =
+ (unsigned long __user *)(unsigned long)sp++;
+ if (__get_user(addr, p)) {
+ printk(" (Bad stack address)");
+ break;
}
- printk("\n");
+ if (__kernel_text_address(addr))
+ print_ip_sym(addr);
}
+ printk("\n");
}
#ifdef CONFIG_KALLSYMS
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 008fd82b5840..fe2cac1b4514 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -58,27 +58,8 @@ static int mips_cpu_timer_irq;
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
static void mips_timer_dispatch(void)
{
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
- /*
- * Yes, this is very tacky, won't work as expected with SMTC and
- * dyntick will break it,
- * but it gives me a nice warm feeling during debug
- */
-#define LEDBAR 0xbf000408
- if (tickcount_this_cpu++ >= HZ) {
- tickcount_this_cpu = 0;
- change_bit(smp_processor_id(), &ledbitmask);
- smp_wmb(); /* Make sure every one else sees the change */
- /* This will pick up any recent changes made by other CPU's */
- *(unsigned int *)LEDBAR = ledbitmask;
- }
-#endif
do_IRQ(mips_cpu_timer_irq);
}
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index d827d6144369..cab81f42eee5 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void)
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_clear_store / cache_line_size) *
- cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+ * cache_line_size : 0;
while (off) {
build_clear_pref(&buf, -off);
off -= cache_line_size;
@@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void)
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
off -= cache_line_size;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 382738ca8a0b..76da73a5ab3c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata;
static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
- /* Found by experiment: R4600 v2.0 needs this, too. */
+ /* Found by experiment: R4600 v2.0/R4700 needs this, too. */
case CPU_R4600:
+ case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa09929cd7a..b46b3e211775 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -14,6 +14,22 @@
#include <asm/sn/sn0/hub.h>
/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+ if (size == 1 && where == 0x3d)
+ return 0x01;
+ else if (size == 2 && where == 0x3c)
+ return 0x0100;
+ else if (size == 4 && where == 0x3c)
+ return 0x00000100;
+
+ return 0;
+}
+
+/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
* Therefore we use type 0 accesses for now even though they won't work
@@ -64,7 +80,7 @@ oh_my_gawd:
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
@@ -127,7 +143,7 @@ oh_my_gawd:
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bb64828a92fe..a18516925cdd 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
static int num_bridges = 0;
bridge_t *bridge;
int slot;
+ extern int pci_probe_only;
+
+ pci_probe_only = 1;
printk("a bridge\n");
@@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+ bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
/*
* Hmm... IRIX sets additional bits in the address which
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 7093e7c573a4..4a500e8cd3cc 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void)
return NASID_TO_COMPACT_NODEID(get_nasid());
}
-/* Extracted from the IOC3 meta driver. FIXME. */
-static inline void ioc3_sio_init(void)
-{
- struct ioc3 *ioc3;
- nasid_t nid;
- long loops;
-
- nid = get_nasid();
- ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
- ioc3->sscr_a = 0; /* PIO mode for uarta. */
- ioc3->sscr_b = 0; /* PIO mode for uartb. */
- ioc3->sio_iec = ~0;
- ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
- loops=1000000; while(loops--);
- ioc3->sregs.uarta.iu_fcr = 0;
- ioc3->sregs.uartb.iu_fcr = 0;
- loops=1000000; while(loops--);
-}
-
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
@@ -234,7 +213,6 @@ void __init plat_mem_setup(void)
panic("Kernel compiled for N mode.");
#endif
- ioc3_sio_init();
ioc3_eth_init();
per_cpu_init();
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bf438d02366e..42cd10956306 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,10 +33,6 @@
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
-#define SLOT_IGNORED 0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
struct node_data *__node_data[MAX_COMPACT_NODES];
@@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot)
return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
}
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
- return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
- return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
- pfn_t slot_psize;
- int slot;
-
- /*
- * Start at the top slot. When we find a slot with memory in it,
- * that's the winner.
- */
- for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
- if ((slot_psize = slot_getsize(node, slot))) {
- if (slot_psize == SLOT_IGNORED)
- continue;
- /* Return the basepfn + the slot size, minus 1. */
- return slot_getbasepfn(node, slot) + slot_psize - 1;
- }
- }
-
- /*
- * If there's no memory on the node, return 0. This is likely
- * to cause problems.
- */
- return 0;
-}
-
static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
{
nasid_t nasid;
@@ -404,13 +355,13 @@ static void __init mlreset(void)
static void __init szmem(void)
{
pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */
- int slot, ignore;
+ int slot;
cnodeid_t node;
num_physpages = 0;
for_each_online_node(node) {
- ignore = nodebytes = 0;
+ nodebytes = 0;
for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
slot_psize = slot_psize_compute(node, slot);
if (slot == 0)
@@ -420,21 +371,20 @@ static void __init szmem(void)
* kernel text.
*/
nodebytes += (1LL << SLOT_SHIFT);
+
+ if (!slot_psize)
+ continue;
+
if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
- (slot0sz << PAGE_SHIFT))
- ignore = 1;
- if (ignore && slot_psize) {
+ (slot0sz << PAGE_SHIFT)) {
printk("Ignoring slot %d onwards on node %d\n",
slot, node);
- slot_psize_cache[node][slot] = SLOT_IGNORED;
slot = MAX_MEM_SLOTS;
continue;
}
num_physpages += slot_psize;
- slot_psize_cache[node][slot] =
- (unsigned short) slot_psize;
- if (slot_psize)
- slot_lastfilled_cache[node] = slot;
+ add_active_range(node, slot_getbasepfn(node, slot),
+ slot_getbasepfn(node, slot) + slot_psize);
}
}
}
@@ -442,18 +392,20 @@ static void __init szmem(void)
static void __init node_mem_init(cnodeid_t node)
{
pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
- pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
pfn_t slot_freepfn = node_getfirstfree(node);
- struct pglist_data *pd;
unsigned long bootmap_size;
+ pfn_t start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
/*
* Allocate the node data structures on the node first.
*/
__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
- pd = NODE_DATA(node);
- pd->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
cpus_clear(hub_data(node)->h_cpus);
@@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node)
sizeof(struct hub_data));
bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
- slot_firstpfn, slot_lastpfn);
- free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
- (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
BOOTMEM_DEFAULT);
+ sparse_memory_present_with_active_regions(node);
}
/*
@@ -515,16 +467,15 @@ void __init paging_init(void)
pagetable_init();
for_each_online_node(node) {
- pfn_t start_pfn = slot_getbasepfn(node, 0);
- pfn_t end_pfn = node_getmaxclick(node) + 1;
+ pfn_t start_pfn, end_pfn;
- zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
- free_area_init_node(node, NODE_DATA(node),
- zones_size, start_pfn, NULL);
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
}
void __init mem_init(void)
@@ -535,34 +486,10 @@ void __init mem_init(void)
high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
for_each_online_node(node) {
- unsigned slot, numslots;
- struct page *end, *p;
-
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
- /*
- * We need to manually do the other slots.
- */
- numslots = node_getlastslot(node);
- for (slot = 1; slot <= numslots; slot++) {
- p = nid_page_nr(node, slot_getbasepfn(node, slot) -
- slot_getbasepfn(node, 0));
-
- /*
- * Free valid memory in current slot.
- */
- for (end = p + slot_getsize(node, slot); p < end; p++) {
- /* if (!page_is_ram(pgnr)) continue; */
- /* commented out until page_is_ram works */
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- totalram_pages++;
- }
- }
}
totalram_pages -= setup_zero_pages(); /* This comes from node 0 */
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index f15fc93d6b35..ba5cdebeaf0d 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
static void __cpuinit ip27_init_secondary(void)
{
per_cpu_init();
- local_irq_enable();
}
static void __cpuinit ip27_smp_finish(void)
{
+ extern void hub_rt_clock_event_init(void);
+
+ hub_rt_clock_event_init();
+ local_irq_enable();
}
static void __init ip27_cpus_done(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9cebc9e7da63..8b4e854af925 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode,
int rt_timer_irq;
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
+
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
- struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int slice = cputoslice(cpu);
/*
@@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = {
#define NSEC_PER_CYCLE 800
#define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE)
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void)
int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
- cd->name = "HUB-RT",
- cd->features = CLOCK_EVT_FEAT_ONESHOT,
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, CYCLES_PER_SEC);
cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- cd->rating = 200,
- cd->irq = irq,
- cd->cpumask = cpumask_of_cpu(cpu),
- cd->rating = 300,
- cd->set_next_event = rt_next_event,
- cd->set_mode = rt_set_mode,
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = rt_next_event;
+ cd->set_mode = rt_set_mode;
clockevents_register_device(cd);
}
@@ -261,6 +260,7 @@ void __init plat_time_init(void)
{
hub_rt_clocksource_init();
hub_rt_clock_event_global_init();
+ hub_rt_clock_event_init();
}
void __cpuinit cpu_time_init(void)
@@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void)
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
- hub_rt_clock_event_init();
set_c0_status(SRB_TIMOCLK);
}
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31ba4795..18363374d51a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,15 +6,19 @@ config TRACE_IRQFLAGS_SUPPORT
source "lib/Kconfig.debug"
config NONPROMISC_DEVMEM
- bool "Disable promiscuous /dev/mem"
+ bool "Filter access to /dev/mem"
help
- The /dev/mem file by default only allows userspace access to PCI
- space and the BIOS code and data regions. This is sufficient for
- dosemu and X and all common users of /dev/mem. With this config
- option, you allow userspace access to all of memory, including
- kernel and userspace memory. Accidental access to this is
- obviously disasterous, but specific access can be used by people
- debugging the kernel.
+ If this option is left off, you allow userspace access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to PCI space and the BIOS code and data regions.
+ This is sufficient for dosemu and X and all common users of
+ /dev/mem.
+
+ If in doubt, say Y.
config EARLY_PRINTK
bool "Early printk" if EMBEDDED
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 90d20c615ef5..215d18672a5a 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -278,7 +278,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap)
return status;
}
/* Clear INTRQ latch */
- status = ata_sff_check_status(ap);
+ status = ap->ops->sff_check_status(ap);
return status;
}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 680cdfc00b90..24b97b0bef99 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -397,6 +397,7 @@ module_param(max_part, int, 0);
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+MODULE_ALIAS("rd");
#ifndef MODULE
/* Legacy boot options - nonmodular */
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 240b0e2d095d..c12d8056bebd 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -110,7 +110,7 @@ static int __init omapflash_probe(struct platform_device *pdev)
err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fceb468ccdec..fe2bc7e42119 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1216,7 +1216,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
clk_enable(info->clk);
- return pxa3xx_nand_config_flash(info);
+ return pxa3xx_nand_config_flash(info, info->flash_info);
}
#else
#define pxa3xx_nand_suspend NULL
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3d44d040a47d..ad81ab8e95e2 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -76,7 +76,7 @@ static int __devinit generic_onenand_probe(struct device *dev)
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(&info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 8f0a570509c5..cf4e07b01d48 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev)
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
- if (res->flags & IORESOURCE_DISABLED)
+ if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
continue;
reserve_range(dev, res->start, res->end, 0);
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index cb52cbbe45ff..f58e41d3ba48 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -186,6 +186,11 @@ asn1_length_decode(struct asn1_ctx *ctx, unsigned int *def, unsigned int *len)
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -203,6 +208,10 @@ asn1_header_decode(struct asn1_ctx *ctx,
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -389,6 +398,11 @@ asn1_oid_decode(struct asn1_ctx *ctx,
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL)
return 0;
diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h
index 9b1689850187..269da09ff637 100644
--- a/include/asm-frv/checksum.h
+++ b/include/asm-frv/checksum.h
@@ -75,7 +75,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
: "0" (sum), "1" (iph), "2" (ihl), "3" (4),
"m"(*(volatile struct { int _[100]; } *)iph)
- : "icc0", "icc1"
+ : "icc0", "icc1", "memory"
);
return (__force __sum16)~sum;
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index ad17d7ce516a..44a67bf05dc1 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -355,6 +355,7 @@ void au1xxx_dbdma_dump(u32 chanid);
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index aa17f658f73c..a46f8e258e6b 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -765,6 +765,9 @@ do { \
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 2f597eea4448..6a0edf72ffbc 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -239,9 +239,10 @@ static inline pte_t pte_mkdirty(pte_t pte)
static inline pte_t pte_mkyoung(pte_t pte)
{
pte.pte_low |= _PAGE_ACCESSED;
- if (pte.pte_low & _PAGE_READ)
+ if (pte.pte_low & _PAGE_READ) {
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
+ }
return pte;
}
#else
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 20b666022dcb..4ca3063ed2ce 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -3,7 +3,7 @@
*
*/
-#ifndef __ASM_RTLX_H
+#ifndef __ASM_RTLX_H_
#define __ASM_RTLX_H_
#include <irq.h>
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index 5daefad3d193..7750c97fde7b 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -232,6 +232,11 @@ static unsigned char asn1_length_decode(struct asn1_ctx *ctx,
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -250,6 +255,10 @@ static unsigned char asn1_header_decode(struct asn1_ctx *ctx,
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -434,6 +443,11 @@ static unsigned char asn1_oid_decode(struct asn1_ctx *ctx,
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL) {
if (net_ratelimit())