summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/i2c/busses/i2c-viapro6
-rw-r--r--Documentation/i2c/writing-clients4
-rw-r--r--drivers/hwmon/w83627hf.c16
-rw-r--r--drivers/i2c/busses/i2c-viapro.c27
-rw-r--r--drivers/i2c/chips/ds1337.c4
5 files changed, 24 insertions, 33 deletions
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 9363b8bd6109..16775663b9f5 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -7,12 +7,10 @@ Supported adapters:
* VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
- * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
- Datasheet: available on request from Via
+ * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
+ Datasheet: available on request from VIA
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index cff7b652588a..d19993cc0604 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -412,7 +412,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
release_region(address,FOO_EXTENT);
/* SENSORS ONLY END */
ERROR1:
- kfree(new_client);
+ kfree(data);
ERROR0:
return err;
}
@@ -443,7 +443,7 @@ much simpler than the attachment code, fortunately!
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
- kfree(data);
+ kfree(i2c_get_clientdata(client));
return 0;
}
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 70ef926c3bd8..4e9a04e1f08e 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -180,11 +180,10 @@ superio_exit(void)
#define W83781D_REG_BANK 0x4E
#define W83781D_REG_CONFIG 0x40
-#define W83781D_REG_ALARM1 0x41
-#define W83781D_REG_ALARM2 0x42
-#define W83781D_REG_ALARM3 0x450
+#define W83781D_REG_ALARM1 0x459
+#define W83781D_REG_ALARM2 0x45A
+#define W83781D_REG_ALARM3 0x45B
-#define W83781D_REG_IRQ 0x4C
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
@@ -1370,13 +1369,6 @@ static void w83627hf_init_client(struct i2c_client *client)
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
-
- /* enable comparator mode for temp2 and temp3 so
- alarm indication will work correctly */
- i = w83627hf_read_value(client, W83781D_REG_IRQ);
- if (!(i & 0x40))
- w83627hf_write_value(client, W83781D_REG_IRQ,
- i | 0x40);
}
/* Start monitoring */
@@ -1400,7 +1392,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
((data->type == w83627thf || data->type == w83637hf)
- && (i == 4 || i == 5)))
+ && (i == 5 || i == 6)))
continue;
data->in[i] =
w83627hf_read_value(client, W83781D_REG_IN(i));
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index c9366b504833..a2237d4b2cf2 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -142,19 +142,18 @@ static int vt596_transaction(u8 size)
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting... ", temp);
+ "Resetting...\n", temp);
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- printk("Failed! (0x%02x)\n", temp);
+ dev_err(&vt596_adapter.dev, "SMBus reset failed! "
+ "(0x%02x)\n", temp);
return -1;
- } else {
- printk("Successful!\n");
}
}
/* Start the transaction by setting bit 6 */
- outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
+ outb_p(0x40 | size, SMBHSTCNT);
/* We will always wait for a fraction of a second */
do {
@@ -171,7 +170,7 @@ static int vt596_transaction(u8 size)
if (temp & 0x10) {
result = -1;
dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
- inb_p(SMBHSTCNT) & 0x3C);
+ size);
}
if (temp & 0x08) {
@@ -180,11 +179,13 @@ static int vt596_transaction(u8 size)
}
if (temp & 0x04) {
+ int read = inb_p(SMBHSTADD) & 0x01;
result = -1;
- /* Quick commands are used to probe for chips, so
- errors are expected, and we don't want to frighten the
- user. */
- if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+ /* The quick and receive byte commands are used to probe
+ for chips, so errors are expected, and we don't want
+ to frighten the user. */
+ if (!((size == VT596_QUICK && !read) ||
+ (size == VT596_BYTE && read)))
dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
@@ -462,9 +463,9 @@ static void __exit i2c_vt596_exit(void)
}
}
-MODULE_AUTHOR(
- "Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
+ "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
+ "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 01b037007410..02682fb794c8 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -164,9 +164,9 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
buf[1] = BIN2BCD(dt->tm_sec);
buf[2] = BIN2BCD(dt->tm_min);
buf[3] = BIN2BCD(dt->tm_hour);
- buf[4] = BIN2BCD(dt->tm_wday) + 1;
+ buf[4] = BIN2BCD(dt->tm_wday + 1);
buf[5] = BIN2BCD(dt->tm_mday);
- buf[6] = BIN2BCD(dt->tm_mon) + 1;
+ buf[6] = BIN2BCD(dt->tm_mon + 1);
val = dt->tm_year;
if (val >= 100) {
val -= 100;