summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/pinctrl/pinctrl-abx500.c30
-rw-r--r--drivers/pinctrl/pinctrl-lantiq.c3
-rw-r--r--drivers/pinctrl/pinctrl-single.c3
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wm8750.c2
-rw-r--r--include/linux/pinctrl/pinconf-generic.h12
5 files changed, 25 insertions, 25 deletions
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index aa17f7580f61..6d4532702f80 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -851,23 +851,12 @@ static int abx500_gpio_probe(struct platform_device *pdev)
if (abx500_pdata)
pdata = abx500_pdata->gpio;
- if (!pdata) {
- if (np) {
- const struct of_device_id *match;
- match = of_match_device(abx500_gpio_match, &pdev->dev);
- if (!match)
- return -ENODEV;
- id = (unsigned long)match->data;
- } else {
- dev_err(&pdev->dev, "gpio dt and platform data missing\n");
- return -ENODEV;
- }
+ if (!(pdata || np)) {
+ dev_err(&pdev->dev, "gpio dt and platform data missing\n");
+ return -ENODEV;
}
- if (platid)
- id = platid->driver_data;
-
pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl),
GFP_KERNEL);
if (pct == NULL) {
@@ -882,6 +871,16 @@ static int abx500_gpio_probe(struct platform_device *pdev)
pct->chip.dev = &pdev->dev;
pct->chip.base = (np) ? -1 : pdata->gpio_base;
+ if (platid)
+ id = platid->driver_data;
+ else if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_device(abx500_gpio_match, &pdev->dev);
+ if (match)
+ id = (unsigned long)match->data;
+ }
+
/* initialize the lock */
mutex_init(&pct->lock);
@@ -900,8 +899,7 @@ static int abx500_gpio_probe(struct platform_device *pdev)
abx500_pinctrl_ab8505_init(&pct->soc);
break;
default:
- dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
- (int) platid->driver_data);
+ dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id);
mutex_destroy(&pct->lock);
return -EINVAL;
}
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
index 615c5002b757..d22ca252b80d 100644
--- a/drivers/pinctrl/pinctrl-lantiq.c
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -52,7 +52,8 @@ static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
int i;
for (i = 0; i < num_maps; i++)
- if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
kfree(map[i].data.configs.configs);
kfree(map);
}
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 5f2d2bfd356e..b9fa04618601 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1166,7 +1166,8 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
(*map)->data.mux.function = np->name;
if (pcs->is_pinconf) {
- if (pcs_parse_pinconf(pcs, np, function, map))
+ res = pcs_parse_pinconf(pcs, np, function, map);
+ if (res)
goto free_pingroups;
*num_maps = 2;
} else {
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
index b964cc550568..de43262398db 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wm8750.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
@@ -53,7 +53,7 @@ static const struct wmt_pinctrl_bank_registers wm8750_banks[] = {
#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
-#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
#define WMT_PIN_SD0CD WMT_PIN(0, 28)
#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 72474e18f1e0..6aa238096622 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -37,17 +37,17 @@
* if it is 0, pull-down is disabled.
* @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
* low, this is the most typical case and is typically achieved with two
- * active transistors on the output. Sending this config will enabale
+ * active transistors on the output. Setting this config will enable
* push-pull mode, the argument is ignored.
* @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
* collector) which means it is usually wired with other output ports
- * which are then pulled up with an external resistor. Sending this
- * config will enabale open drain mode, the argument is ignored.
+ * which are then pulled up with an external resistor. Setting this
+ * config will enable open drain mode, the argument is ignored.
* @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- * (open emitter). Sending this config will enabale open drain mode, the
+ * (open emitter). Setting this config will enable open drain mode, the
* argument is ignored.
- * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
- * argument. The argument is in mA.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
+ * passed as argument. The argument is in mA.
* @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
* If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
* schmitt-trigger mode is disabled.